diff --git a/_pages/af_ZA/9.2.0-ctrtransfer.txt b/_pages/af_ZA/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/af_ZA/9.2.0-ctrtransfer.txt
+++ b/_pages/af_ZA/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/af_ZA/a9lh-to-b9s.txt b/_pages/af_ZA/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/af_ZA/a9lh-to-b9s.txt
+++ b/_pages/af_ZA/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/af_ZA/cart-update.txt b/_pages/af_ZA/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/af_ZA/cart-update.txt
+++ b/_pages/af_ZA/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/af_ZA/credits.txt b/_pages/af_ZA/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/af_ZA/credits.txt
+++ b/_pages/af_ZA/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/af_ZA/f3-(linux).txt b/_pages/af_ZA/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/af_ZA/f3-(linux).txt
+++ b/_pages/af_ZA/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/af_ZA/f3x-(mac).txt b/_pages/af_ZA/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/af_ZA/f3x-(mac).txt
+++ b/_pages/af_ZA/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/af_ZA/faq.txt b/_pages/af_ZA/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/af_ZA/faq.txt
+++ b/_pages/af_ZA/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/af_ZA/file-extensions-(windows).txt b/_pages/af_ZA/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/af_ZA/file-extensions-(windows).txt
+++ b/_pages/af_ZA/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/af_ZA/finalizing-setup.txt b/_pages/af_ZA/finalizing-setup.txt
index f959c138cf..e462ce4bfe 100644
--- a/_pages/af_ZA/finalizing-setup.txt
+++ b/_pages/af_ZA/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Overview of steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/af_ZA/flashing-ntrboot-(custom-firmware).txt b/_pages/af_ZA/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/af_ZA/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/af_ZA/flashing-ntrboot-(powersaves).txt b/_pages/af_ZA/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/af_ZA/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/af_ZA/get-started-(new-3ds).txt b/_pages/af_ZA/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/af_ZA/get-started-(new-3ds).txt
+++ b/_pages/af_ZA/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/af_ZA/get-started-(old-3ds).txt b/_pages/af_ZA/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/af_ZA/get-started-(old-3ds).txt
+++ b/_pages/af_ZA/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/af_ZA/get-started.txt b/_pages/af_ZA/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/af_ZA/get-started.txt
+++ b/_pages/af_ZA/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/af_ZA/godmode9-usage.txt b/_pages/af_ZA/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/af_ZA/godmode9-usage.txt
+++ b/_pages/af_ZA/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/af_ZA/h2testw-(windows).txt b/_pages/af_ZA/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/af_ZA/h2testw-(windows).txt
+++ b/_pages/af_ZA/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/af_ZA/home.txt b/_pages/af_ZA/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/af_ZA/home.txt
+++ b/_pages/af_ZA/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/af_ZA/homebrew-launcher-(alternatives).txt b/_pages/af_ZA/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/af_ZA/homebrew-launcher-(alternatives).txt
+++ b/_pages/af_ZA/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/af_ZA/homebrew-launcher-(soundhax).txt b/_pages/af_ZA/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/af_ZA/homebrew-launcher-(soundhax).txt
+++ b/_pages/af_ZA/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/af_ZA/installing-boot9strap-(browser).txt b/_pages/af_ZA/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/af_ZA/installing-boot9strap-(browser).txt
+++ b/_pages/af_ZA/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/af_ZA/installing-boot9strap-(dsiware).txt b/_pages/af_ZA/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/af_ZA/installing-boot9strap-(dsiware).txt
+++ b/_pages/af_ZA/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/af_ZA/installing-boot9strap-(dsiware-game-injection).txt b/_pages/af_ZA/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/af_ZA/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/af_ZA/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/af_ZA/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/af_ZA/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/af_ZA/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/af_ZA/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/af_ZA/installing-boot9strap-(dsiware-save-injection).txt b/_pages/af_ZA/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/af_ZA/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/af_ZA/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/af_ZA/installing-boot9strap-(hardmod).txt b/_pages/af_ZA/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/af_ZA/installing-boot9strap-(hardmod).txt
+++ b/_pages/af_ZA/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/af_ZA/installing-boot9strap-(homebrew-launcher).txt b/_pages/af_ZA/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/af_ZA/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/af_ZA/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/af_ZA/installing-boot9strap-(mset).txt b/_pages/af_ZA/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/af_ZA/installing-boot9strap-(mset).txt
+++ b/_pages/af_ZA/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/af_ZA/installing-boot9strap-(ntrboot).txt b/_pages/af_ZA/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/af_ZA/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/af_ZA/move-emunand.txt b/_pages/af_ZA/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/af_ZA/move-emunand.txt
+++ b/_pages/af_ZA/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/af_ZA/ntr-and-cubic-ninja.txt b/_pages/af_ZA/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/af_ZA/ntr-and-cubic-ninja.txt
+++ b/_pages/af_ZA/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/af_ZA/ntrboot.txt b/_pages/af_ZA/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/af_ZA/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/af_ZA/region-changing.txt b/_pages/af_ZA/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/af_ZA/region-changing.txt
+++ b/_pages/af_ZA/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/af_ZA/site-navigation.txt b/_pages/af_ZA/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/af_ZA/site-navigation.txt
+++ b/_pages/af_ZA/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/af_ZA/troubleshooting.txt b/_pages/af_ZA/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/af_ZA/troubleshooting.txt
+++ b/_pages/af_ZA/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/af_ZA/uninstall-cfw.txt b/_pages/af_ZA/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/af_ZA/uninstall-cfw.txt
+++ b/_pages/af_ZA/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/af_ZA/updating-b9s.txt b/_pages/af_ZA/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/af_ZA/updating-b9s.txt
+++ b/_pages/af_ZA/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ar_SA/9.2.0-ctrtransfer.txt b/_pages/ar_SA/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/ar_SA/9.2.0-ctrtransfer.txt
+++ b/_pages/ar_SA/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/ar_SA/a9lh-to-b9s.txt b/_pages/ar_SA/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/ar_SA/a9lh-to-b9s.txt
+++ b/_pages/ar_SA/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ar_SA/cart-update.txt b/_pages/ar_SA/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/ar_SA/cart-update.txt
+++ b/_pages/ar_SA/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/ar_SA/credits.txt b/_pages/ar_SA/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/ar_SA/credits.txt
+++ b/_pages/ar_SA/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/ar_SA/f3-(linux).txt b/_pages/ar_SA/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/ar_SA/f3-(linux).txt
+++ b/_pages/ar_SA/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/ar_SA/f3x-(mac).txt b/_pages/ar_SA/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/ar_SA/f3x-(mac).txt
+++ b/_pages/ar_SA/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/ar_SA/faq.txt b/_pages/ar_SA/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/ar_SA/faq.txt
+++ b/_pages/ar_SA/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/ar_SA/file-extensions-(windows).txt b/_pages/ar_SA/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/ar_SA/file-extensions-(windows).txt
+++ b/_pages/ar_SA/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/ar_SA/finalizing-setup.txt b/_pages/ar_SA/finalizing-setup.txt
index f959c138cf..e462ce4bfe 100644
--- a/_pages/ar_SA/finalizing-setup.txt
+++ b/_pages/ar_SA/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Overview of steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/ar_SA/flashing-ntrboot-(custom-firmware).txt b/_pages/ar_SA/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/ar_SA/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ar_SA/flashing-ntrboot-(powersaves).txt b/_pages/ar_SA/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/ar_SA/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/ar_SA/get-started-(new-3ds).txt b/_pages/ar_SA/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/ar_SA/get-started-(new-3ds).txt
+++ b/_pages/ar_SA/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/ar_SA/get-started-(old-3ds).txt b/_pages/ar_SA/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/ar_SA/get-started-(old-3ds).txt
+++ b/_pages/ar_SA/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/ar_SA/get-started.txt b/_pages/ar_SA/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/ar_SA/get-started.txt
+++ b/_pages/ar_SA/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ar_SA/godmode9-usage.txt b/_pages/ar_SA/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/ar_SA/godmode9-usage.txt
+++ b/_pages/ar_SA/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/ar_SA/h2testw-(windows).txt b/_pages/ar_SA/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/ar_SA/h2testw-(windows).txt
+++ b/_pages/ar_SA/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/ar_SA/home.txt b/_pages/ar_SA/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/ar_SA/home.txt
+++ b/_pages/ar_SA/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/ar_SA/homebrew-launcher-(alternatives).txt b/_pages/ar_SA/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/ar_SA/homebrew-launcher-(alternatives).txt
+++ b/_pages/ar_SA/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/ar_SA/homebrew-launcher-(soundhax).txt b/_pages/ar_SA/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/ar_SA/homebrew-launcher-(soundhax).txt
+++ b/_pages/ar_SA/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/ar_SA/installing-boot9strap-(browser).txt b/_pages/ar_SA/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/ar_SA/installing-boot9strap-(browser).txt
+++ b/_pages/ar_SA/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/ar_SA/installing-boot9strap-(dsiware).txt b/_pages/ar_SA/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/ar_SA/installing-boot9strap-(dsiware).txt
+++ b/_pages/ar_SA/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/ar_SA/installing-boot9strap-(dsiware-game-injection).txt b/_pages/ar_SA/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/ar_SA/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/ar_SA/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/ar_SA/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/ar_SA/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/ar_SA/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/ar_SA/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/ar_SA/installing-boot9strap-(dsiware-save-injection).txt b/_pages/ar_SA/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/ar_SA/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/ar_SA/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/ar_SA/installing-boot9strap-(hardmod).txt b/_pages/ar_SA/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/ar_SA/installing-boot9strap-(hardmod).txt
+++ b/_pages/ar_SA/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/ar_SA/installing-boot9strap-(homebrew-launcher).txt b/_pages/ar_SA/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/ar_SA/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/ar_SA/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/ar_SA/installing-boot9strap-(mset).txt b/_pages/ar_SA/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/ar_SA/installing-boot9strap-(mset).txt
+++ b/_pages/ar_SA/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/ar_SA/move-emunand.txt b/_pages/ar_SA/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/ar_SA/move-emunand.txt
+++ b/_pages/ar_SA/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/ar_SA/ntr-and-cubic-ninja.txt b/_pages/ar_SA/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/ar_SA/ntr-and-cubic-ninja.txt
+++ b/_pages/ar_SA/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/ar_SA/ntrboot.txt b/_pages/ar_SA/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/ar_SA/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/ar_SA/region-changing.txt b/_pages/ar_SA/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/ar_SA/region-changing.txt
+++ b/_pages/ar_SA/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/ar_SA/site-navigation.txt b/_pages/ar_SA/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/ar_SA/site-navigation.txt
+++ b/_pages/ar_SA/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/ar_SA/troubleshooting.txt b/_pages/ar_SA/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/ar_SA/troubleshooting.txt
+++ b/_pages/ar_SA/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/ar_SA/uninstall-cfw.txt b/_pages/ar_SA/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/ar_SA/uninstall-cfw.txt
+++ b/_pages/ar_SA/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/ar_SA/updating-b9s.txt b/_pages/ar_SA/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/ar_SA/updating-b9s.txt
+++ b/_pages/ar_SA/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ca_ES/9.2.0-ctrtransfer.txt b/_pages/ca_ES/9.2.0-ctrtransfer.txt
index 72acac1f51..c464754aa9 100644
--- a/_pages/ca_ES/9.2.0-ctrtransfer.txt
+++ b/_pages/ca_ES/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/ca_ES/a9lh-to-b9s.txt b/_pages/ca_ES/a9lh-to-b9s.txt
index 32f0641eb1..83d7af33a6 100644
--- a/_pages/ca_ES/a9lh-to-b9s.txt
+++ b/_pages/ca_ES/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "D'A9LH a B9S"
---
Aquesta pàgina és per a usuaris actuals d'arm9loaderhax que desitgin actualitzar els seus dispositius a boot9strap.
-{: .notice--info}
Totes les futures versions de Luma3DS és faran exclusivament en el format `.firm`, el qual només serà compatible amb boot9strap i sighax. Això vol dir que per a continuar rebent les darreres actualitzacions de Luma3DS, hauríeu d'utilitzar aquesta pàgina per actualitzar la vostra instal·lació.
-{: .notice--info}
+
+Per a fer servir els enllaços [magnet](https://ca.wikipedia.org/wiki/Magnet), necessitareu un client per a descàrregues BitTorrent com ara [Deluge](http://dev.deluge-torrent.org/wiki/Download)
Si teniu un PIN habilitat a Luma3DS, SafeB9SInstaller us alertarà de l'error "OTP Crypto Fail" a menys que deshabiliteu el vostre PIN temporalment (podeu tornar-lo a habilitar després de l'actualització).
{: .notice--warning}
-Per a fer servir els enllaços [magnet](https://ca.wikipedia.org/wiki/Magnet), necessitareu un client per a descàrregues BitTorrent com ara [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
Hi ha hagut informes d'una onada de bandejaments a usuaris de CFW per part de Nintendo. Per guardar-vos-en, si us plau, seguiu els següents passos abans de començar aquesta guia:
diff --git a/_pages/ca_ES/cart-update.txt b/_pages/ca_ES/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/ca_ES/cart-update.txt
+++ b/_pages/ca_ES/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/ca_ES/credits.txt b/_pages/ca_ES/credits.txt
index 3765eb25c6..0be234fb51 100644
--- a/_pages/ca_ES/credits.txt
+++ b/_pages/ca_ES/credits.txt
@@ -11,7 +11,6 @@ increïbles!**
{: .notice--primary}
Si t'he oblidat, contacta'm i hi afegiré el teu nom.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/ca_ES/f3-(linux).txt b/_pages/ca_ES/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/ca_ES/f3-(linux).txt
+++ b/_pages/ca_ES/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/ca_ES/f3x-(mac).txt b/_pages/ca_ES/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/ca_ES/f3x-(mac).txt
+++ b/_pages/ca_ES/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/ca_ES/faq.txt b/_pages/ca_ES/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/ca_ES/faq.txt
+++ b/_pages/ca_ES/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/ca_ES/file-extensions-(windows).txt b/_pages/ca_ES/file-extensions-(windows).txt
index bdc61c7425..c3560982c4 100644
--- a/_pages/ca_ES/file-extensions-(windows).txt
+++ b/_pages/ca_ES/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instruccions
diff --git a/_pages/ca_ES/finalizing-setup.txt b/_pages/ca_ES/finalizing-setup.txt
index 5697ad7938..3025617429 100644
--- a/_pages/ca_ES/finalizing-setup.txt
+++ b/_pages/ca_ES/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Descripció general dels passos
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Què necessiteu
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/ca_ES/flashing-ntrboot-(custom-firmware).txt b/_pages/ca_ES/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..a26cd7d34d
--- /dev/null
+++ b/_pages/ca_ES/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Què necessiteu
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instruccions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ca_ES/flashing-ntrboot-(powersaves).txt b/_pages/ca_ES/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/ca_ES/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/ca_ES/get-started-(new-3ds).txt b/_pages/ca_ES/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/ca_ES/get-started-(new-3ds).txt
+++ b/_pages/ca_ES/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/ca_ES/get-started-(old-3ds).txt b/_pages/ca_ES/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/ca_ES/get-started-(old-3ds).txt
+++ b/_pages/ca_ES/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/ca_ES/get-started.txt b/_pages/ca_ES/get-started.txt
index 0e03dd42b9..07565db423 100644
--- a/_pages/ca_ES/get-started.txt
+++ b/_pages/ca_ES/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Aquesta pàgina us ajudarà a trobar per on començar en funció del vostre dispositiu.
-Els colors dels dispositius que apareixen en la imatge poden variar, però heu de tenir en compte la col·locació dels botons i les característiques de cada dispositiu per assegurar-vos que trieu el correcte.
-{: .notice}
-
-Feu clic a la imatge del vostre dispositiu per anar a la pàgina corresponent.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. Aquesta pàgina us ajudarà a trobar per on començar en funció del vostre dispositiu.
-{: .notice--info}
+Feu clic a la imatge del vostre dispositiu per anar a la pàgina corresponent. Els colors dels dispositius que apareixen en la imatge poden variar, però heu de tenir en compte la col·locació dels botons i les característiques de cada dispositiu per assegurar-vos que trieu el correcte.
Si ja havíeu modificat la vostra 3DS amb anterioritat i teniu una instal·lació de CFW a l'EmuNAND, simplement seguiu totes les instruccions a la SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Abans de començar, és possible que vulgueu comprovar que la vostra targeta SD no tingui errors utilitzant [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), o [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ca_ES/godmode9-usage.txt b/_pages/ca_ES/godmode9-usage.txt
index 09bb748e0f..53536b4e13 100644
--- a/_pages/ca_ES/godmode9-usage.txt
+++ b/_pages/ca_ES/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/ca_ES/h2testw-(windows).txt b/_pages/ca_ES/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/ca_ES/h2testw-(windows).txt
+++ b/_pages/ca_ES/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/ca_ES/home.txt b/_pages/ca_ES/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/ca_ES/home.txt
+++ b/_pages/ca_ES/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/ca_ES/homebrew-launcher-(alternatives).txt b/_pages/ca_ES/homebrew-launcher-(alternatives).txt
index 8ac039c3d0..b163586558 100644
--- a/_pages/ca_ES/homebrew-launcher-(alternatives).txt
+++ b/_pages/ca_ES/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### Què necessiteu
diff --git a/_pages/ca_ES/homebrew-launcher-(soundhax).txt b/_pages/ca_ES/homebrew-launcher-(soundhax).txt
index c4fb178f74..f8468307e5 100644
--- a/_pages/ca_ES/homebrew-launcher-(soundhax).txt
+++ b/_pages/ca_ES/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/ca_ES/installing-boot9strap-(browser).txt b/_pages/ca_ES/installing-boot9strap-(browser).txt
index c4bfbd432c..04b7d6df1c 100644
--- a/_pages/ca_ES/installing-boot9strap-(browser).txt
+++ b/_pages/ca_ES/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Què necessiteu
diff --git a/_pages/ca_ES/installing-boot9strap-(dsiware).txt b/_pages/ca_ES/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/ca_ES/installing-boot9strap-(dsiware).txt
+++ b/_pages/ca_ES/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/ca_ES/installing-boot9strap-(dsiware-game-injection).txt b/_pages/ca_ES/installing-boot9strap-(dsiware-game-injection).txt
index 1d89d425ef..1a2c57fc58 100644
--- a/_pages/ca_ES/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/ca_ES/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Què necessiteu
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/ca_ES/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/ca_ES/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/ca_ES/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/ca_ES/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/ca_ES/installing-boot9strap-(dsiware-save-injection).txt b/_pages/ca_ES/installing-boot9strap-(dsiware-save-injection).txt
index e9dd09b856..4ad395be13 100644
--- a/_pages/ca_ES/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/ca_ES/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Què necessiteu
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/ca_ES/installing-boot9strap-(hardmod).txt b/_pages/ca_ES/installing-boot9strap-(hardmod).txt
index a5f0f183ff..a3ae1137c7 100644
--- a/_pages/ca_ES/installing-boot9strap-(hardmod).txt
+++ b/_pages/ca_ES/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### Què necessiteu
diff --git a/_pages/ca_ES/installing-boot9strap-(homebrew-launcher).txt b/_pages/ca_ES/installing-boot9strap-(homebrew-launcher).txt
index 1e91637b5e..bfba16d5bf 100644
--- a/_pages/ca_ES/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/ca_ES/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instruccions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/ca_ES/installing-boot9strap-(mset).txt b/_pages/ca_ES/installing-boot9strap-(mset).txt
index f7ceab811d..c3a9bb30b4 100644
--- a/_pages/ca_ES/installing-boot9strap-(mset).txt
+++ b/_pages/ca_ES/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Què necessiteu
diff --git a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..5de1b599ba
--- /dev/null
+++ b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Què necessiteu
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instruccions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/ca_ES/move-emunand.txt b/_pages/ca_ES/move-emunand.txt
index 924388dbe8..2d6c269470 100644
--- a/_pages/ca_ES/move-emunand.txt
+++ b/_pages/ca_ES/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/ca_ES/ntr-and-cubic-ninja.txt b/_pages/ca_ES/ntr-and-cubic-ninja.txt
index aeb7736d5c..03f32bbdab 100644
--- a/_pages/ca_ES/ntr-and-cubic-ninja.txt
+++ b/_pages/ca_ES/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Què necessiteu
diff --git a/_pages/ca_ES/ntrboot.txt b/_pages/ca_ES/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/ca_ES/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/ca_ES/region-changing.txt b/_pages/ca_ES/region-changing.txt
index 9af4ad4843..6278b84066 100644
--- a/_pages/ca_ES/region-changing.txt
+++ b/_pages/ca_ES/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Què necessiteu
diff --git a/_pages/ca_ES/site-navigation.txt b/_pages/ca_ES/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/ca_ES/site-navigation.txt
+++ b/_pages/ca_ES/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/ca_ES/troubleshooting.txt b/_pages/ca_ES/troubleshooting.txt
index b886828aee..1a813ba243 100644
--- a/_pages/ca_ES/troubleshooting.txt
+++ b/_pages/ca_ES/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/ca_ES/uninstall-cfw.txt b/_pages/ca_ES/uninstall-cfw.txt
index 90ef9cba19..1c876622a0 100644
--- a/_pages/ca_ES/uninstall-cfw.txt
+++ b/_pages/ca_ES/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### Què necessiteu
diff --git a/_pages/ca_ES/updating-b9s.txt b/_pages/ca_ES/updating-b9s.txt
index 536c78669f..8f0a472381 100644
--- a/_pages/ca_ES/updating-b9s.txt
+++ b/_pages/ca_ES/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/cs_CZ/9.2.0-ctrtransfer.txt b/_pages/cs_CZ/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/cs_CZ/9.2.0-ctrtransfer.txt
+++ b/_pages/cs_CZ/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/cs_CZ/a9lh-to-b9s.txt b/_pages/cs_CZ/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/cs_CZ/a9lh-to-b9s.txt
+++ b/_pages/cs_CZ/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/cs_CZ/cart-update.txt b/_pages/cs_CZ/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/cs_CZ/cart-update.txt
+++ b/_pages/cs_CZ/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/cs_CZ/credits.txt b/_pages/cs_CZ/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/cs_CZ/credits.txt
+++ b/_pages/cs_CZ/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/cs_CZ/f3-(linux).txt b/_pages/cs_CZ/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/cs_CZ/f3-(linux).txt
+++ b/_pages/cs_CZ/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/cs_CZ/f3x-(mac).txt b/_pages/cs_CZ/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/cs_CZ/f3x-(mac).txt
+++ b/_pages/cs_CZ/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/cs_CZ/faq.txt b/_pages/cs_CZ/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/cs_CZ/faq.txt
+++ b/_pages/cs_CZ/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/cs_CZ/file-extensions-(windows).txt b/_pages/cs_CZ/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/cs_CZ/file-extensions-(windows).txt
+++ b/_pages/cs_CZ/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/cs_CZ/finalizing-setup.txt b/_pages/cs_CZ/finalizing-setup.txt
index f959c138cf..e462ce4bfe 100644
--- a/_pages/cs_CZ/finalizing-setup.txt
+++ b/_pages/cs_CZ/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Overview of steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/cs_CZ/flashing-ntrboot-(custom-firmware).txt b/_pages/cs_CZ/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/cs_CZ/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/cs_CZ/flashing-ntrboot-(powersaves).txt b/_pages/cs_CZ/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/cs_CZ/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/cs_CZ/get-started-(new-3ds).txt b/_pages/cs_CZ/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/cs_CZ/get-started-(new-3ds).txt
+++ b/_pages/cs_CZ/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/cs_CZ/get-started-(old-3ds).txt b/_pages/cs_CZ/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/cs_CZ/get-started-(old-3ds).txt
+++ b/_pages/cs_CZ/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/cs_CZ/get-started.txt b/_pages/cs_CZ/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/cs_CZ/get-started.txt
+++ b/_pages/cs_CZ/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/cs_CZ/godmode9-usage.txt b/_pages/cs_CZ/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/cs_CZ/godmode9-usage.txt
+++ b/_pages/cs_CZ/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/cs_CZ/h2testw-(windows).txt b/_pages/cs_CZ/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/cs_CZ/h2testw-(windows).txt
+++ b/_pages/cs_CZ/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/cs_CZ/home.txt b/_pages/cs_CZ/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/cs_CZ/home.txt
+++ b/_pages/cs_CZ/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/cs_CZ/homebrew-launcher-(alternatives).txt b/_pages/cs_CZ/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/cs_CZ/homebrew-launcher-(alternatives).txt
+++ b/_pages/cs_CZ/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt
+++ b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/cs_CZ/installing-boot9strap-(browser).txt b/_pages/cs_CZ/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/cs_CZ/installing-boot9strap-(browser).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/cs_CZ/installing-boot9strap-(dsiware).txt b/_pages/cs_CZ/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/cs_CZ/installing-boot9strap-(dsiware).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/cs_CZ/installing-boot9strap-(dsiware-game-injection).txt b/_pages/cs_CZ/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/cs_CZ/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/cs_CZ/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/cs_CZ/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/cs_CZ/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/cs_CZ/installing-boot9strap-(dsiware-save-injection).txt b/_pages/cs_CZ/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/cs_CZ/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/cs_CZ/installing-boot9strap-(homebrew-launcher).txt b/_pages/cs_CZ/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/cs_CZ/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/cs_CZ/installing-boot9strap-(mset).txt b/_pages/cs_CZ/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/cs_CZ/installing-boot9strap-(mset).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/cs_CZ/move-emunand.txt b/_pages/cs_CZ/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/cs_CZ/move-emunand.txt
+++ b/_pages/cs_CZ/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/cs_CZ/ntr-and-cubic-ninja.txt b/_pages/cs_CZ/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/cs_CZ/ntr-and-cubic-ninja.txt
+++ b/_pages/cs_CZ/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/cs_CZ/ntrboot.txt b/_pages/cs_CZ/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/cs_CZ/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/cs_CZ/region-changing.txt b/_pages/cs_CZ/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/cs_CZ/region-changing.txt
+++ b/_pages/cs_CZ/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/cs_CZ/site-navigation.txt b/_pages/cs_CZ/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/cs_CZ/site-navigation.txt
+++ b/_pages/cs_CZ/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/cs_CZ/troubleshooting.txt b/_pages/cs_CZ/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/cs_CZ/troubleshooting.txt
+++ b/_pages/cs_CZ/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/cs_CZ/uninstall-cfw.txt b/_pages/cs_CZ/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/cs_CZ/uninstall-cfw.txt
+++ b/_pages/cs_CZ/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/cs_CZ/updating-b9s.txt b/_pages/cs_CZ/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/cs_CZ/updating-b9s.txt
+++ b/_pages/cs_CZ/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/da_DK/9.2.0-ctrtransfer.txt b/_pages/da_DK/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/da_DK/9.2.0-ctrtransfer.txt
+++ b/_pages/da_DK/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/da_DK/a9lh-to-b9s.txt b/_pages/da_DK/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/da_DK/a9lh-to-b9s.txt
+++ b/_pages/da_DK/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/da_DK/cart-update.txt b/_pages/da_DK/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/da_DK/cart-update.txt
+++ b/_pages/da_DK/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/da_DK/credits.txt b/_pages/da_DK/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/da_DK/credits.txt
+++ b/_pages/da_DK/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/da_DK/f3-(linux).txt b/_pages/da_DK/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/da_DK/f3-(linux).txt
+++ b/_pages/da_DK/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/da_DK/f3x-(mac).txt b/_pages/da_DK/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/da_DK/f3x-(mac).txt
+++ b/_pages/da_DK/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/da_DK/faq.txt b/_pages/da_DK/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/da_DK/faq.txt
+++ b/_pages/da_DK/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/da_DK/file-extensions-(windows).txt b/_pages/da_DK/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/da_DK/file-extensions-(windows).txt
+++ b/_pages/da_DK/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/da_DK/finalizing-setup.txt b/_pages/da_DK/finalizing-setup.txt
index f959c138cf..e462ce4bfe 100644
--- a/_pages/da_DK/finalizing-setup.txt
+++ b/_pages/da_DK/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Overview of steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/da_DK/flashing-ntrboot-(custom-firmware).txt b/_pages/da_DK/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/da_DK/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/da_DK/flashing-ntrboot-(powersaves).txt b/_pages/da_DK/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/da_DK/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/da_DK/get-started-(new-3ds).txt b/_pages/da_DK/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/da_DK/get-started-(new-3ds).txt
+++ b/_pages/da_DK/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/da_DK/get-started-(old-3ds).txt b/_pages/da_DK/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/da_DK/get-started-(old-3ds).txt
+++ b/_pages/da_DK/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/da_DK/get-started.txt b/_pages/da_DK/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/da_DK/get-started.txt
+++ b/_pages/da_DK/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/da_DK/godmode9-usage.txt b/_pages/da_DK/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/da_DK/godmode9-usage.txt
+++ b/_pages/da_DK/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/da_DK/h2testw-(windows).txt b/_pages/da_DK/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/da_DK/h2testw-(windows).txt
+++ b/_pages/da_DK/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/da_DK/home.txt b/_pages/da_DK/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/da_DK/home.txt
+++ b/_pages/da_DK/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/da_DK/homebrew-launcher-(alternatives).txt b/_pages/da_DK/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/da_DK/homebrew-launcher-(alternatives).txt
+++ b/_pages/da_DK/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/da_DK/homebrew-launcher-(soundhax).txt b/_pages/da_DK/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/da_DK/homebrew-launcher-(soundhax).txt
+++ b/_pages/da_DK/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/da_DK/installing-boot9strap-(browser).txt b/_pages/da_DK/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/da_DK/installing-boot9strap-(browser).txt
+++ b/_pages/da_DK/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/da_DK/installing-boot9strap-(dsiware).txt b/_pages/da_DK/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/da_DK/installing-boot9strap-(dsiware).txt
+++ b/_pages/da_DK/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/da_DK/installing-boot9strap-(dsiware-game-injection).txt b/_pages/da_DK/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/da_DK/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/da_DK/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/da_DK/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/da_DK/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/da_DK/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/da_DK/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/da_DK/installing-boot9strap-(dsiware-save-injection).txt b/_pages/da_DK/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/da_DK/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/da_DK/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/da_DK/installing-boot9strap-(hardmod).txt b/_pages/da_DK/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/da_DK/installing-boot9strap-(hardmod).txt
+++ b/_pages/da_DK/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/da_DK/installing-boot9strap-(homebrew-launcher).txt b/_pages/da_DK/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/da_DK/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/da_DK/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/da_DK/installing-boot9strap-(mset).txt b/_pages/da_DK/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/da_DK/installing-boot9strap-(mset).txt
+++ b/_pages/da_DK/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/da_DK/installing-boot9strap-(ntrboot).txt b/_pages/da_DK/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/da_DK/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/da_DK/move-emunand.txt b/_pages/da_DK/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/da_DK/move-emunand.txt
+++ b/_pages/da_DK/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/da_DK/ntr-and-cubic-ninja.txt b/_pages/da_DK/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/da_DK/ntr-and-cubic-ninja.txt
+++ b/_pages/da_DK/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/da_DK/ntrboot.txt b/_pages/da_DK/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/da_DK/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/da_DK/region-changing.txt b/_pages/da_DK/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/da_DK/region-changing.txt
+++ b/_pages/da_DK/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/da_DK/site-navigation.txt b/_pages/da_DK/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/da_DK/site-navigation.txt
+++ b/_pages/da_DK/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/da_DK/troubleshooting.txt b/_pages/da_DK/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/da_DK/troubleshooting.txt
+++ b/_pages/da_DK/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/da_DK/uninstall-cfw.txt b/_pages/da_DK/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/da_DK/uninstall-cfw.txt
+++ b/_pages/da_DK/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/da_DK/updating-b9s.txt b/_pages/da_DK/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/da_DK/updating-b9s.txt
+++ b/_pages/da_DK/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/de_DE/9.2.0-ctrtransfer.txt b/_pages/de_DE/9.2.0-ctrtransfer.txt
index f596adaec2..59244cf4f8 100644
--- a/_pages/de_DE/9.2.0-ctrtransfer.txt
+++ b/_pages/de_DE/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ titel: "9.2.0 CTRTransfer"
---
Dies ist der zusätzliche Teil um ein 9.2.0 CTRTransfer-Image auf deinem Gerät zu installieren.
-{: .notice--primary}
Um die [Magnet-Links](https://en.wikipedia.org/wiki/Magnet_URI_scheme) auf dieser Seite zu nutzen, brauchst du einen Torrent-Programm wie [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
-{: .notice--info}
Formatiere niemals einen New 2DS, auf dem eine Systemsoftware Version <11.4.0 läuft, denn sonst kannst du die Erstinstallation nicht durchführen und hast einen BRICK!
{: .notice--danger}
diff --git a/_pages/de_DE/a9lh-to-b9s.txt b/_pages/de_DE/a9lh-to-b9s.txt
index bdc251f9a8..3ad08b313f 100644
--- a/_pages/de_DE/a9lh-to-b9s.txt
+++ b/_pages/de_DE/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH zu B9S"
---
Diese Seite ist für Benutzer von arm9loaderhax, die ihre Geräte auf boot9strap updaten wollen.
-{: .notice--info}
Alle zukünftigen Versionen von Luma3DS werden nur im `.firm`- Format sein, welches nur mit boot9strap und sighax kompatibel ist. Das bedeutet, dass du diese Seite zum Updaten deiner Installation nutzen solltest, falls du weiterhin Updates von Luma3DS erhalten möchtest.
-{: .notice--info}
+
+Um die [Magnet-Links](https://en.wikipedia.org/wiki/Magnet_URI_scheme) auf dieser Seite zu nutzen, brauchst du einen Torrent-Programm wie [Deluge](http://dev.deluge-torrent.org/wiki/Download)
Wenn du eine PIN für Luma3DS aktiviert hast, wird SafeB9SInstaller einen "OTP Crypto Fail"-Fehler ausgeben, außer du deaktivierst deine PIN vorübergehend (nach dem Update kannst du die PIN wieder aktivieren).
{: .notice--warning}
-Um die [Magnet-Links](https://en.wikipedia.org/wiki/Magnet_URI_scheme) auf dieser Seite zu nutzen, brauchst du einen Torrent-Programm wie [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
Es gibt Berichte über eine Welle von Banns, die Nintendo an CFW-Nutzer aushändigt. Befolge diese Schritte zuerst um dich davor zu schützen:
diff --git a/_pages/de_DE/cart-update.txt b/_pages/de_DE/cart-update.txt
index 3714e50db7..103828c996 100644
--- a/_pages/de_DE/cart-update.txt
+++ b/_pages/de_DE/cart-update.txt
@@ -3,20 +3,18 @@ title: "Kartenupdate"
---
Alle Spielmodule erhalten eine Kopie der System-Firmware, die die Software benötigt, um abgespielt zu werden. Dies ermöglicht jedem Spieler mit einem Gerät einer niedrigeren Firmware, der das betreffende Spiel benutzt, auf die vorinstallierte Betriebssoftware zu aktualisieren (sogar ohne Internetverbindung).
-{: .notice--info}
{% capture notice-1 %}
Beachten Sie, dass Karten-Updates nur Updates für Kernfunktionen wie die Systemeinstellungen, das Home Menü, etc. liefern. Karten-Updates aktualisieren nicht Nintendo 3DS Sound und Netzwerkfunktionen, wie den Internetbrowser, den eShop, die StreetPass Mii Plaza oder der System-Transfer.
-
+
Dies bedeutet, dass das Ausführen eines Karten-Updates auf einem älteren 3DS, mit älterer 3DS Sound-version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)*, [Soundhax](homebrew-launcher-(soundhax)) unbrauchbar macht! Du benötigst eine [alternative Methode](homebrew-launcher-(alternatives)), um dir Zugang zum Homebrew Launcher zu schaffen!
+
+Das bedeutet auch, dass ein Kartenupdate KEINEN Browser installiert, sollte nicht bereits einer vorhanden sein. Dies wird **nur** die aktuelle System-Version aktualisieren *(Beispiel: 2.1.0-0 -> 6.0.0-0)*. Die letzte Ziffer *(die -0)* ändert sich **nicht**.
{% endcapture %}
{{ notice-1 | markdownify }}
-Das bedeutet auch, dass ein Kartenupdate KEINEN Browser installiert, sollte nicht bereits einer vorhanden sein. Dies wird **nur** die aktuelle System-Version aktualisieren *(Beispiel: 2.1.0-0 -> 6.0.0-0)*. Die letzte Ziffer *(die -0)* ändert sich **nicht**.
-{: .notice--warning}
-
**Ein Update mit einer Game Cartridge, die eine höhere Version als 9.9.0 installiert, wird deinen Browser solange deaktivieren, bis du ein normales Update gemacht hast!**
{: .notice--danger}
diff --git a/_pages/de_DE/credits.txt b/_pages/de_DE/credits.txt
index 45c9c53214..ec21d9797c 100644
--- a/_pages/de_DE/credits.txt
+++ b/_pages/de_DE/credits.txt
@@ -9,7 +9,6 @@ title: "Danksagung"
{: .notice--primary}
Sollte ich vergessen haben, dich hier aufzuführen, dann kontaktiere mich und ich füge deinen Namen hinzu.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/de_DE/f3-(linux).txt b/_pages/de_DE/f3-(linux).txt
index 93bb7057ce..9809dbd0fb 100644
--- a/_pages/de_DE/f3-(linux).txt
+++ b/_pages/de_DE/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
Dies ist ein Add-on-Abschnitt für die Überprüfung Ihrer SD-Karte für Fehler mit h2testw.
-{: .notice--info}
Basierend auf der Größe der SD-Karte und der Geschwindigkeit deines Computer kann dieser Prozess mehrere Stunden dauern!
-{: .notice--info}
Diese Seite ist nur für Linux-Nutzer gedacht. Falls du kein Linux-Nutzer bist, schaue dir stattdessen [H2testw (Windows)](h2testw-(windows)) oder [F3X (macOS)](f3x-(mac)) an.
-{: .notice--info}
#### Was du brauchst
diff --git a/_pages/de_DE/f3x-(mac).txt b/_pages/de_DE/f3x-(mac).txt
index bd8ac8fb17..7bd893f818 100644
--- a/_pages/de_DE/f3x-(mac).txt
+++ b/_pages/de_DE/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
Dies ist ein Add-on-Abschnitt für die Überprüfung Ihrer SD-Karte für Fehler mit h2testw.
-{: .notice--info}
Basierend auf der Größe der SD-Karte und der Geschwindigkeit deines Computers kann dieser Prozess mehrere Stunden dauern!
-{: .notice--info}
Diese Seite ist nur für macOS-Nutzer. Falls du kein macOS-Nutzer bist, schaue dir stattdessen [H2testw (Windows)](h2testw-(windows)) oder [F3 (Linux)](f3-(linux)) an.
-{: .notice--info}
#### Was Du brauchst
diff --git a/_pages/de_DE/faq.txt b/_pages/de_DE/faq.txt
index 4d0ed8a61b..8234e4cb2f 100644
--- a/_pages/de_DE/faq.txt
+++ b/_pages/de_DE/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**F:** *Mein Gerät ist auf der neuesten Systemversion. Kann ich mein Gerät hacken?*
**A: ** Ja
-
+
**F:** *Wie aktualisiere ich Luma3DS?*
**A:**Verwende dafür den Luma3DS Updater
-
+
**F:** *Ich habe über Sachen gehört, für die ich bezahlen muss (Gateway, Sky3DS, etc). Ist das etwas, was ich brauche?*
**A:** Nein. boot9strap ist die beste Methode Hax zu laden, die sehr früh im Bootprozess ausgeführt werden.
-
+
**F:** *Wie bewege ich Speicherstände aus einer bestehen Gatewayinstallation zu Spielen, welche bereits auf dem Gerät installiert sind?*
**A:** [Siehe](https://gbatemp.net/threads/425743/)
-
+
**F:** *Was brauche ich für diesen Guide?*
**A:** Für diese Anleitung benötigst du nur kostenlose Software
-
+
**F:** *Wie riskant ist das Hacken meiner Konsole?*
**A:** Defekte/gebrickte Konsolen sind jetzt *eigentlich* unmöglich, außer du ignorierst/umgehst alle Sicherheitschecks.
-
+
**F:** *Kann ich hiermit coole Homebrew und Emulatoren ausführen?*
** A: ** Ja! Custom Firmware aktiviert nicht nur den Homebrew Launcher, sondern gibt dir auch Hacks auf allen Versionen. Das heißt, dass du sie für immer behalten kannst, selbst wenn du updatest.
-
+
**F:** *Kann ich das hier verwenden, um Spiele aus anderen Regionen zu spielen?*
**A:** Luma3DS unterstützt regionsfreie Patches, was Nutzern ermöglicht Spiele aus anderen Regionen zu installieren, und das ohne zusätzliche Modifikationen oder Schritte.
-
+
**F:** *Ist es sicher die SysNAND CFW zu updaten?*
**A:** Ja. Es ist sicher, hört auf danach zu fragen.
-
+
**F:** *Wo kann ich Support finden?*
**A:** Für Hilfe auf Englisch, frage auf dem [Nintendo Homebrew Discord](https://discord.gg/MWxPgEp).
-
+
**F:** *Kann ich das mit einer 4GB (oder kleineren) SD-Karte machen?*
** A: ** Ja!
-
+
** F: ** *Kann ich eine 128 GB (oder größere) SD-Karte verwenden? *
** A: ** Ja, aber einige Benutzer haben Verlangsamungen gemeldet, wenn solche großen Größen verwendet werden. Beachte, dass du die SD-Karte nicht mit exFAT formatieren darfst; sie muss auf FAT32 formatiert werden.
-
+
**F:** *Wie kann ich später alles auf eine neue SD-Karte überspielen?*
**A:** Kopiere einfach alle Dateien auf die neue SD-Karte.
-
+
**F:** *Kann ich meine NNID behalten?*
**A:** Wenn du mit einer NNID startest und jeden Schritt befolgst, wirst du am Ende deine NNID behalten.
-
+
**F:** *Und was ist mit Systemtransfers?*
**A:** Nachdem du die Anleitung beendet hast, kannst du einen Systemtransfer zu und von einem gehackten 3DS oder 2DS mit B9S genauso durchführen, wie du es mit einer originalen Konsole oder mit EmuNAND (es gehen alle nicht legitimen Spiele/Designs/DLCs wärend des Tranfers verloren; Speicherstände bleiben sogar für Spiele vorhanden, welche gelöscht wurden) machen würdest.
-
+
** F: ** * Kann ich das auch ohne Computer tun (z.B. mit einem Android Smartphone)?*
** A: ** Alles was du brauchst, ist eine Möglichkeit die Dateien auf eine SD-Karte zu schreiben!
-
+
**F:** *Hilfe! Irgendwas ist schief gelaufen und ich kann nicht mehr booten...*
**F:** Bitte folge der [Anleitung zur Problembehandlung](troubleshooting).
diff --git a/_pages/de_DE/file-extensions-(windows).txt b/_pages/de_DE/file-extensions-(windows).txt
index c8ad521d0d..318b75943b 100644
--- a/_pages/de_DE/file-extensions-(windows).txt
+++ b/_pages/de_DE/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "Dateierweiterungen (Windows)"
---
Dies ist ein Add-on-Abschnitt für das Deaktivieren des Windows Standart-Verhalten, Dateierweiterungen zu verstecken.
-{: .notice--info}
Dies wird es einfach machen die benötigten Dateien in diesem Guide zu finden.
-{: .notice--info}
#### Anleitung
diff --git a/_pages/de_DE/finalizing-setup.txt b/_pages/de_DE/finalizing-setup.txt
index c48cb828f1..0357a92d56 100644
--- a/_pages/de_DE/finalizing-setup.txt
+++ b/_pages/de_DE/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Setup abschließen"
#### Übersicht der Schritte
-{% capture notice-2 %}
Die Datei "boot.firm", die von boot9strap gestartet wird nachdem es vom NAND geladen wurde kann jeder funktionierende ARM9-Payload sein, wenn er im FIRM-Format ist. Die Datei kann jederzeit ersetzt werden, obwohl Luma3DS bei dem Start anderer ARM9-Payloads im FIRM-Format den Luma3DS-Chainloader benutzt.
-
+
In diesem Fall verwendest du Luma3DS von [AuroraWright](https://github.com/AuroraWright/), um direkt einen gepatchten SysNAND zu starten. Dies erlaubt es dir, die Notwendigkeit eines EmuNAND jeglicher Art komplett zu umgehen, was die Nutzung eines gehackten 3DS wesentlich erleichtert, sowie Speicherplatz auf der SD-Karte spart.
-
+
Während dieses Prozesses richtest du auch folgende Programme ein:
+ **FBI** *(installiert Spiele und Anwendungen im CIA-Format)*
@@ -18,10 +17,6 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
+ **GodMode9** *(Multifunktionstool, welches NAND- und Cartridge-Funktionen ausführen kann)*
+ **Homebrew Launcher Loader** *(startet den Homebrew Launcher als normale Anwendung dank Rosalinas Magie)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Was du brauchst
* Die neueste Version von [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(die `.cia` Datei)*
@@ -134,8 +129,10 @@ Wenn du vor dieser Anleitung bereits einen EmuNAND hattest und dessen Inhalte in
___
{% capture notice-10 %}
-Ab jetzt kannst du den Luma 3DS Updater verwenden, um Luma3DS auf dem neuesten Stand zu halten. Dafür drücke einfach den (A)-Knopf nach dem Öffnen des Updaters.
+Ab jetzt kannst du den Luma 3DS Updater verwenden, um Luma3DS auf dem neuesten Stand zu halten. Dafür drücke einfach den (A)-Knopf nach dem Öffnen des Updaters.
+
Das ist nicht das gleiche wie ein System-Update; der Updater lädt nur die neuesten Dateien für Luma3DS herunter.
+
Dies aktualisiert nur die Luma3DS-Dateien auf der SD-Karte. Wenn du die Konsole ohne die SD-Karte startest, wird die Version verwendet, die du in den CTRNAND kopiert hast.
{% endcapture %}
@@ -143,9 +140,13 @@ Dies aktualisiert nur die Luma3DS-Dateien auf der SD-Karte. Wenn du die Konsole
{% capture notice-6 %}
Beim einschalten wird nun standartmäßig Luma3DS CFW SysNAND gebootet.
+
Du kannst nun (Select) beim Starten halten, um das Luma3DS Konfigurationsmenü zu öffnen.
+
Du kannst nun (Start) während des Bootvorgangs drücken, um das Luma3DS Chainloader-Menü anzuzeigen (beachte, dass das Chainloader-Menü nur angezeigt wird falls mehrere Payloads erkannt wurden).
+
Du kannst nun (Start) + (Select) + (X) beim Bootvorgang drücken um eine Kopie der ARM11-Bootrom (`boot11.bin`), der ARM9-Bootrom (`boot9.bin`) und deiner einzigartigen Konsolen-OTP (`OTP.bin`) im `/boot9strap/`-Ordner auf deiner SD-Karte zu erstellen ( beachte, dass das keine Nachricht oder Bestätigung anzeigt).
+
Du kannst nun (L) + (Steuerkreuz unten) + (Select) drücken, während das System aktiv ist, um das von Luma3DS integrierte Rosalina Menü zu laden. Eine vollständige Liste der Funktionen von Rosalina, gibt es im [Luma3DS V8.0 Release] (https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ Um [NTR CFW](https://github.com/44670/BootNTR/) zu verwenden, installiere [BootN
{% capture notice-7 %}
Entferne alle Dateien und Ordner aus dem Stammverzeichnis der SD-Karte, die *nicht* im folgenden Bild zu sehen sind. Falls du einen `DCIM` Ordner hast, belasse ihn auf der SD-Karte, denn er enthält alle Fotos, die mit der 3DS Kamera aufgenommen wurden:
-
+
{% endcapture %}
diff --git a/_pages/de_DE/flashing-ntrboot-(custom-firmware).txt b/_pages/de_DE/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..1d62609954
--- /dev/null
+++ b/_pages/de_DE/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Was du brauchst
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Anleitung
+
+##### Abschnitt I - Vorbereitung
+
+1. Schalte den **Quellen-3DS** aus
+1. Lege die SD-Karte des **Quellen-3DS** in deinen Computer ein
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Warte bis der Prozess beendet ist
+1. Drücke (B), um zum Hauptmenü zurückzukehren
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Warte bis der Prozess beendet ist
+1. Drücke (B), um zum Hauptmenü zurückzukehren
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/de_DE/flashing-ntrboot-(powersaves).txt b/_pages/de_DE/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/de_DE/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/de_DE/get-started-(new-3ds).txt b/_pages/de_DE/get-started-(new-3ds).txt
index ebbbecb15e..ccacb3414c 100644
--- a/_pages/de_DE/get-started-(new-3ds).txt
+++ b/_pages/de_DE/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Los geht's (New 3DS)"
---
-Wähle die passende Methode für deine Version aus der unteren Tabelle.
-{: .notice--primary}
+Wähle die passende Methode für deine Version aus der unteren Tabelle. Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Das heißt, dass die Zeile "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet.
-Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Das heißt, dass die Zeile "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet.
-{: .notice--info}
-
-Beachten Sie, dass die letzte Zahl Ihrer System-Version (die durch einen Bindestrich vorangestellt ist) sich auf die Version Ihres Browsers bezieht. Derzeit ist die Browserversion irrelevant für den neuen 3DS in diesem Guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Derzeit ist die Browserversion irrelevant für den neuen 3DS in diesem Guide.
Für alle Versionen kannst du auch ein [Kartenupdate](cart-update) zu einer höheren Version in der gleichen Spalte durchführen und deren Anweisung folgen.
-{: .notice--info}
Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den Systemeinstellungen.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den
ALLE VERSIONEN
|
- Installation von boot9strap (ntrboothax)
(Benötigt eine kompatible Flashcard) oder Installation von boot9strap (Hardmod)
(Löten notwendig) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/de_DE/get-started-(old-3ds).txt b/_pages/de_DE/get-started-(old-3ds).txt
index 6995fa2837..e8b4c2601a 100644
--- a/_pages/de_DE/get-started-(old-3ds).txt
+++ b/_pages/de_DE/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Los geht's (Old 3DS)"
---
-Wähle die entsprechende Seite für deine Version aus der unten folgenden Tabelle.
-{: .notice--primary}
+Wähle die entsprechende Seite für deine Version aus der unten folgenden Tabelle. Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Das heißt, dass die Spalte "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Wenn die Version "-0" entspricht, ist kein Browser vorhanden, alle Nummern über "-0" bedeuten, dass ein Browser installiert ist.
-{% capture notice-1 %}
-Die letzten beiden Spalten beziehen sich auf die letzte Nummer deiner Version (welche zeigt, welche Version des Browsers auf deiner Konsole installiert ist). Wenn die Version "-0" entspricht, ist kein Browser vorhanden, alle Nummern über "-0" bedeuten, dass ein Browser installiert ist.
-
-Die "Von" und "Bis" Felder zählen als inklusive. Das heißt, dass die Spalte "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet.
-
Im Falle der Version "5.0.0-0U" zum Beispiel würdest du die Spalte "Kein Browser" mit der Zeile "5.0.0 bis 5.1.0" wählen, weil sich die Systemsoftware in dieser Reichweite befindet und kein Browser installiert ist.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
Für alle Versionen kannst du auch ein [Kartenupdate](cart-update) zu einer höheren Version in der gleichen Spalte durchführen und deren Anweisung folgen.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Beachten Sie, dass Karten-Updates nur Updates für Kernfunktionen wie die Systemeinstellungen, das Home Menü, etc. liefern. Karten-Updates aktualisieren nicht Nintendo 3DS Sound und Netzwerkfunktionen, wie den Internetbrowser, den eShop, die StreetPass Mii Plaza oder der System-Transfer.
-
-Dies bedeutet, dass das Verwenden von Karten-Updates einer Version eines älteren Nintendo 3DS Sound *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions) *, das eine neuere Version des Nintendo 3DS Sound [Soundhax](homebrew-launcher-(soundhax))! Du benötigst eine [alternative Methode](homebrew-launcher-(alternatives)), um dir Zugang zum Homebrew Launcher zu schaffen!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Falls du mit einem Spielmodul geupdatet hast, das die Version 9.9.0 oder höher enthält *(das heißt, du hast Version 9.9.0 oder höher, aber dein Browser ist auf -25 oder darunter, z. B. 10.2.0-24)*, wurde dein Browser entfernt. Benutze in diesem Fall die Spalte "Kein Browser".
-{: .notice--warning}
Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den Systemeinstellungen.
-{: .notice--success}
{: .notice--info}
+Falls du mit einem Spielmodul geupdatet hast, das die Version 9.9.0 oder höher enthält *(das heißt, du hast Version 9.9.0 oder höher, aber dein Browser ist auf -25 oder darunter, z. B. 10.2.0-24)*, wurde dein Browser entfernt. Benutze in diesem Fall die Spalte "Kein Browser".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/de_DE/get-started.txt b/_pages/de_DE/get-started.txt
index 66d6c308ed..a60dd5bf86 100644
--- a/_pages/de_DE/get-started.txt
+++ b/_pages/de_DE/get-started.txt
@@ -2,23 +2,14 @@
title: "Los geht's"
---
-Diese Seite erklärt, wie man boot9strap auf einem *unmodifizierten* 3DS oder 2DS installiert. Falls du arm9loaderhax bereits installiert hast und zu boot9strap updaten möchtest, befolge die [A9LH zu B9S](a9lh-to-b9s) Anleitung.
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Diese Seite wird dich durch alle benötigten Schritte passend zu deiner Konsole leiten.
-Die Farben der abgebildeten Geräte können abweichen, aber achte genau auf die Anordnung der Knöpfe und die Details der Geräte, um sicherzustellen, dass du das Richtige auswählst.
-{: .notice}
-
-Klicke auf das Bild deines Gerätes, um zur entsprechenden Seite zu gelangen.
-{: .notice--primary}
-
-Verschiedene Modelle, Versionen und Regionen der Geräte erfordern unterschiedliche Schritte, um das Endziel der boot9strap-Custom-Firmware zu erreichen. Diese Seite wird dich durch alle benötigten Schritte passend zu deiner Konsole leiten.
-{: .notice--info}
+Klicke auf das Bild deines Gerätes, um zur entsprechenden Seite zu gelangen. Die Farben der abgebildeten Geräte können abweichen, aber achte genau auf die Anordnung der Knöpfe und die Details der Geräte, um sicherzustellen, dass du das Richtige auswählst.
Wenn du deinen 3DS bereits gehackt hast und eine CFW mit EmuNAND hast, folge einfach allen Schritten auf deinem SysNAND. Deine Daten werden am Ende vom EmuNAND zu deiner neuen B9S-Installation übertragen.
-{: .notice--info}
-Beachte bitte, dass Screenshots im Guide vergrößert werden können, um mehr Kontext zu zeigen, indem du auf sie klickst.
-{: .notice--info}
+Diese Seite erklärt, wie man boot9strap auf einem *unmodifizierten* 3DS oder 2DS installiert. Falls du arm9loaderhax bereits installiert hast und zu boot9strap updaten möchtest, befolge die [A9LH zu B9S](a9lh-to-b9s) Anleitung.
+{: .notice--primary}
Bevor du beginnst, solltest du als Windows-Benutzer die Option zum Anzeigen der Datei-Erweiterungen aktivieren mit [Datei-Erweiterungen (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Bevor du beginnst, solltest du als Windows-Benutzer die Option zum Anzeigen der
Bevor du anfängst, solltest du deine SD-Karte auf Fehler überprüfen. Verwende dazu [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), oder [F3X (macOS)](f3x-(mac))!
{: .notice--warning}
-Beachte, dass die Methoden [ntrboothax](installing-boot9strap-(ntrboothax)) und [hardmod](installing-boot9strap-(hardmod)) auf *allen Geräten, Regionen und Versionen* funktionieren! Das gilt auch für chinesische und taiwanische Geräte die davor nicht zu hacken waren!
-{: .notice--success}
-
{% capture notice-1 %}
Es gibt Berichte über eine Welle von Sperren, die von Nintendo für CFW-Nutzer ausgehändigt werden. Befolge diese Schritte zuerst um dich davor zu schützen:
diff --git a/_pages/de_DE/godmode9-usage.txt b/_pages/de_DE/godmode9-usage.txt
index caa5e2166c..e39221bf7f 100644
--- a/_pages/de_DE/godmode9-usage.txt
+++ b/_pages/de_DE/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "Benutzung von GodMode9"
---
GodMode9 ist ein Vollzugriffsdateibrowser für die Nintendo 3DS Konsole und gibt dir Zugriff auf deine SD Karte, auf die FAT Partitionen in deinem SysNAND und EmuNAND und im Grunde alles andere auch. Unter anderem kannst du Dateien kopieren, löschen, umbenennen und Ordner erstellen.
-{: .notice--primary}
Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
-{: .notice--info}
{% capture notice %}
** Das ist ein mächtiges Zeug, es bietet dir die Möglichkeit, grundsätzlich jede denkbare Modifikation aller Systemdaten auf der 3DS-Konsole zu machen. Allerdings werden Vorkehrungen getroffen, damit du die Daten deiner Konsole nicht versehentlich beschädigst.
-
+
Das Schreibberechtigungssystem schützt dich durch die Bereitstellung von Warnungen und zwingt dich, eine Freischaltungssequenz für die Aktivierung von Schreibberechtigungen einzugeben. Es ist nicht möglich, wichtige Dateien zu verändern oder zu überschreiben, ohne solche Freischaltsequenzen eingegeben zu haben, und es ist auch nicht möglich, versehentlich etwas zu entsperren. Wie immer, sei klug und mache Backups, nur um sicher zu sein. **.
{% endcapture %}
diff --git a/_pages/de_DE/h2testw-(windows).txt b/_pages/de_DE/h2testw-(windows).txt
index 5e8ac1900f..cd77cdcd75 100644
--- a/_pages/de_DE/h2testw-(windows).txt
+++ b/_pages/de_DE/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
Dies ist ein Add-on-Abschnitt für die Überprüfung Ihrer SD-Karte für Fehler mit h2testw.
-{: .notice--info}
Je nach Größe deiner SD-Karte und der Schnelligkeit deines Computers, kann dieser Prozess bis zu mehreren Stunden dauern!
-{: .notice--info}
Diese Seite ist nur für Windowsnutzer gedacht. Falls du Windows nicht benutzt, besuche die Seiten für [F3 (linux)](f3-(linux)) oder [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Was du brauchst
diff --git a/_pages/de_DE/home.txt b/_pages/de_DE/home.txt
index 9c8fc7f0e3..dd7d9b2e64 100644
--- a/_pages/de_DE/home.txt
+++ b/_pages/de_DE/home.txt
@@ -37,7 +37,7 @@ In den meisten Fällen läuft Homebrew auf deinem Gerät 100% kostenlos [einfach
**Custom Firmware** ("CFW") ermöglicht dir fortgeschrittene Hacks, welche Userland-Homebrew nicht ohne weiteres erlaubt. Zum Beispiel lassen sich mit Hilfe von Signatur-Patches unsignierte Titel installieren, die direkt im HOME-Menü erscheinen.
-CFW kann ganz einfach auf jedem System mit 11.5 oder niedriger installiert werden.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Was wird mit dieser Anleitung installiert?
diff --git a/_pages/de_DE/homebrew-launcher-(alternatives).txt b/_pages/de_DE/homebrew-launcher-(alternatives).txt
index 8330a340cf..42cb0e171c 100644
--- a/_pages/de_DE/homebrew-launcher-(alternatives).txt
+++ b/_pages/de_DE/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternativen)"
---
Der Homebrew Launcher hat viele verschiedene Eintrittspunkte, beziehungsweise Möglichkeiten, um ihn zu starten.
-{: .notice--info}
Solltest du niemanden für Doodlebomb finden und du anders nicht den Homebrew Launcher starten kannst, ist hier die günstigste Möglichkeit, dir eine "Nintendo Selects" Kopie von [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (Versichere dich, die richtige Karte für deine Region gewählt zu haben) und [Powersaves](https://amzn.to/2fb3VY7) (kompatibel mit allen Regionen) zu kaufen und dann oot3dhax von der Tabelle weiter unten zu benutzen.
-{: .notice--info}
Stelle sicher, dass die Drahtloskommunikation deiner Konsole eingeschaltet ist, da udsploit (wird auf der nächsten Seite genutzt) ein aktives Drahtlosmodul erfordert und manche Konsolen (New 3DS, New 2DS und Old 2DS) die Drahtloskommunikation im Homebrew Launcher nicht einschalten können. Drahtloskommunikation muss nur eingeschaltet sein. Eine Verbindung zu einem Access Point nicht notwendig.
-{: .notice--info}
#### Was Du brauchst
diff --git a/_pages/de_DE/homebrew-launcher-(soundhax).txt b/_pages/de_DE/homebrew-launcher-(soundhax).txt
index 9bb887d2b7..5f625f6007 100644
--- a/_pages/de_DE/homebrew-launcher-(soundhax).txt
+++ b/_pages/de_DE/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Der Homebrew Launcher hat viele verschiedene Eintrittspunkte, beziehungsweise Möglichkeiten, um ihn zu starten.
-{: .notice--info}
Soundhax ist kompatibel mit den Versionen 9.0.0 bis einschließlich 11.3.0 in den Regionen EUR, JPN, KOR, and USA.
-{: .notice--info}
Stelle sicher, dass die Drahtloskommunikation deiner Konsole eingeschaltet ist, da udsploit (wird auf der nächsten Seite genutzt) ein aktives Drahtlosmodul erfordert und manche Konsolen (New 3DS, New 2DS und Old 2DS) die Drahtloskommunikation im Homebrew Launcher nicht einschalten können. Es muss nur die Verbindung an sein; eine Verbindung zu einem Access Point wird nicht zwingend benötigt.
-{: .notice--info}
{% capture notice-1 %}
Beachten Sie, dass Karten-Updates nur Updates für Kernfunktionen wie die Systemeinstellungen, das Home Menü, etc. liefern. Karten-Updates aktualisieren nicht Nintendo 3DS Sound und Netzwerkfunktionen, wie den Internetbrowser, den eShop, die StreetPass Mii Plaza oder der System-Transfer.
-
+
Das bedeutet, dass ein Karten-Update von einer Systemversion, die eine ältere Version von Nintendo 3DS Sound enthält *(<7.0.0 auf Old 3DS Systemen in den Regionen EUR, JPN, KOR und USA)*, auf eine Systemversion mit neuerer Version von Nintendo 3DS Sound, [Soundhax](homebrew-launcher-(soundhax)) unbrauchbar machen wird! Du benötigst eine [alternative Methode](homebrew-launcher-(alternatives)), um dir Zugang zum Homebrew Launcher zu schaffen!
{% endcapture %}
diff --git a/_pages/de_DE/installing-boot9strap-(browser).txt b/_pages/de_DE/installing-boot9strap-(browser).txt
index 38ef08994a..2c011cfacc 100644
--- a/_pages/de_DE/installing-boot9strap-(browser).txt
+++ b/_pages/de_DE/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installation von boot9strap (Browser)"
---
Falls du bereits deinen 3DS zuvor gehackt hast und eine EmuNAND basierte CFW installiert ist: Diese Anleitung behandelt nur das SysNAND und alle Schritte sollten nur innerhalb des SysNANDs ausgeführt/angewendet werden. Beachte, dass die Begriffe EmuNAND und RedNAND sich auf leicht unterschiedliche Implementierungen [des selben Konzepts](http://3dbrew.org/wiki/NAND_Redirection) beziehen.
-{: .notice--info}
#### Was du brauchst
diff --git a/_pages/de_DE/installing-boot9strap-(dsiware).txt b/_pages/de_DE/installing-boot9strap-(dsiware).txt
index 5ea1f850cf..4138e9f375 100644
--- a/_pages/de_DE/installing-boot9strap-(dsiware).txt
+++ b/_pages/de_DE/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installation von boot9strap (DSiWare)"
---
Es gibt zwei verschiedene Methoden zur Installation von boot9strap mit DSiWare auf 11.5.0.
-{: .notice--info}
Eine dieser Methoden funktioniert nur mit vier bestimmten Spielen, die nicht mehr im eShop verkauft werden, während die andere noch mit etlichen Spielen funktioniert, die noch im eShop zu kaufen sind.
-{: .notice--info}
Beide Methoden erfordern zwei Geräte. Ein 3DS (oder 2DS) muss irgendeine Art von Custom Firmware (z.B. boot9strap oder arm9loaderhax) haben und wird als *Quell-3DS* bezeichnet, während der andere 3DS (oder 2DS) auf originaler 11.5.0 Firmware als *Ziel-3DS* bezeichnet wird.
-{: .notice--info}
-
-Beide Systeme MÜSSEN aus der selben Region sein.
-{: .notice--warning}
Beide Methoden gehen davon aus, dass der 3DS mit CFW mit boot9strap oder arm9loaderhax läuft und diese Anleitung abgeschlossen hat. Es ist zwar möglich, diese Methoden mit einer anderen Art von Custom-Firmware zu benutzen, aber das würde den Rahmen dieser Anleitung sprengen.
-{: .notice--info}
Beide dieser Methoden benutzen eine Kombination des "bekannten Quelltextes der FIRM-Partitionen"-Exploit, welcher [here](https://www.3dbrew.org/wiki/3DS_System_Flaws) erklärt wird, und eines Fehlers, der es DSiWare-Titeln ermöglicht, im verschlüsselten NAND zu lesen und zu schreiben.
-{: .notice--info}
-{% capture notice-4 %}
Beide dieser Methoden erfordern einen [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) von einem CFW 3DS zu einem regulären 3DS als Teil der benötigten Schritte. System Transfers funktionieren *nur* in die folgenden Richtungen:
+ New 3DS oder New 2DS -> New 3DS oder New 2DS
+ Old 3DS oder Old 2DS -> Old 3DS oder Old 2DS
- + Old 3DS oder Old 2DS -> New 3DS oder New 2DS
-{% endcapture %}
+ + Old 3DS oder Old 2DS -> New 3DS oder New 2DS
-{{ notice-4 | markdownify }}
+Beide Systeme MÜSSEN aus der selben Region sein.
+{: .notice--warning}
-In beiden dieser Methoden wird die NNID des CFW 3DS an den Ziel-3DS gebunden sein, bis du entweder einen Systemtransfer zurück durchführst (nach einer Woche Wartezeit) oder dich an den Nintendo Support wendest, um die Bindung aufzuheben! (Details können in der Anleitung gefunden werden)
-{: .notice--danger}
-
-System Transfers können nur einmal pro Woche pro NNID durchgeführt werden.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers können nur einmal pro Woche pro NNID durchgeführt werden.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installation von boot9strap (DSiWare Speicherstand-Injektion)](installing-boot9strap-(dsiware-save-injection))
-
+
Diese Methode erfordert, dass der Quellen-3DS bereits rechtmäßig eines der folgenden Spiele besitzt:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ Eine Raubkopie des Spiels wird *nicht* funktionieren, und all diese Spiele wurde
{% capture notice-1 %}
[Installation von boot9strap (DSiWare Spiel-Injektion)](installing-boot9strap-(dsiware-game-injection))
-
+
Diese Methode erfordert, dass der Quellen-3DS eines der in [Installation von boot9strap (In DSIWare injizierbare Spiele)](installing-boot9strap-(dsiware-game-injection-list)) aufgeführten Spiele kauft oder bereits rechtmäßig besitzt.
-
+
Eine Raubkopie des Spiels wird *nicht* funktionieren.
{% endcapture %}
diff --git a/_pages/de_DE/installing-boot9strap-(dsiware-game-injection).txt b/_pages/de_DE/installing-boot9strap-(dsiware-game-injection).txt
index 4ac9e1c112..e1c68d7a7a 100644
--- a/_pages/de_DE/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/de_DE/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installation von boot9strap (DSiWare Spiel-Injektion)"
---
Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
-{: .notice--info}
Um die [Magnet-Links](https://en.wikipedia.org/wiki/Magnet_URI_scheme) auf dieser Seite zu nutzen, brauchst du einen Torrent-Programm wie [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Bevor du fortfährst, solltest du sicher stellen, dass du alle Hinweise und Warnungen auf [Installation von boot9strap (DSiWare)](installing-boot9strap-(dsiware)) durchgelesen hast
+
+Wenn du nicht die richtige `.firm`-Datei benutzt, die dem Ziel-3DS entspricht, wird dein 3DS BRICKEN! Stelle sicher, dass du die Richtige downloadest und benutzt!
{: .notice--danger}
#### Was du brauchst
-* Zwei 3DS Systeme
- + **Der Quell-3DS**: Der 3DS mit einer installierten Custom Firmware (wie z. B. boot9strap oder arm9loaderhax) *auf der aktuellsten Version*
- + **Der Ziel-3DS:**: Der ungehackte 3DS mit regulärer Firmware *auf 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Kaufe (falls noch nicht getan) ein kompatibles DSiWare-Spiel aus dem eShop auf dem **Quell-3DS**
Eine Raubkopie des Spiels wird **nicht** funktionieren
+ Für eine Liste der kompatiblen Spiele, siehe [Installation von boot9strap (DSiWare Spiel-Injektionsliste)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/de_DE/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/de_DE/installing-boot9strap-(dsiware-game-injection-list).txt
index 5c10bd5b79..7335c3095d 100644
--- a/_pages/de_DE/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/de_DE/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installation von boot9strap (Liste der injizierbaren DSiWare-Spiele)"
---
Dies ist eine automatisch generierte Liste aller Spiele, die mit der [Installation von boot9strap (per DSiWare)](installing-boot9strap-(dsiware)) kompatibel ist.
-{: .notice--primary}
-Die Liste ist aufgeteilt in Regionen in der Reihenfolge USA, EUR, JPN.
-{: .notice--info}
-
-Jede Region ist aufsteigend nach Anschaffungspreis sortiert.
-{: .notice--info}
+Die Liste ist aufgeteilt in Regionen in der Reihenfolge USA, EUR, JPN. Jede Region ist aufsteigend nach Anschaffungspreis sortiert.
QR Codes können gescannt werden, indem du (L + R) im Home Menü drückst, und auf dem unteren Bildschirm das QR Icon anklickst.
-{: .notice--info}
-Die Größenanforderung existiert weil der injizierte DSiWare Titel und der dazugehörige gehackte Speicherstand die vorgegebene Größe nicht verändern darf, um den Systemtransfer erfolgreich durchzuführen. Das heißt der ursprüngliche DSiWare Titel groß genug sein muss, um die gehackte DSiWare zu enthalten.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/de_DE/installing-boot9strap-(dsiware-save-injection).txt b/_pages/de_DE/installing-boot9strap-(dsiware-save-injection).txt
index 66c430e0c4..c6fcbf736e 100644
--- a/_pages/de_DE/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/de_DE/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installation von boot9strap (DSiWare Spielstand-Injektion)"
---
Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
-{: .notice--info}
Um die [Magnet-Links](https://en.wikipedia.org/wiki/Magnet_URI_scheme) auf dieser Seite zu nutzen, brauchst du einen Torrent-Programm wie [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Bevor du fortfährst, solltest du sicher stellen, dass du alle Hinweise und Warnungen auf [Installation von boot9strap (DSiWare)](installing-boot9strap-(dsiware)) durchgelesen hast
-{: .notice--danger}
Wenn du nicht die richtige `.firm`-Datei benutzt, die dem Ziel-3DS entspricht, wird dein 3DS BRICKEN! Stelle sicher, dass du die Richtige downloadest und benutzt!
{: .notice--danger}
#### Was du brauchst
-* Zwei 3DS Systeme
- + **Der Quell-3DS**: Der 3DS mit einer installierten Custom Firmware (wie z. B. boot9strap oder arm9loaderhax) *auf der aktuellsten Version*
- + **Der Ziel-3DS:**: Der ungehackte 3DS mit regulärer Firmware *auf 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Besitze eines der folgenden nutzbaren DSiWare Spiele (eine Raubkopie des Spiels wird **nicht** funktionieren) auf dem **Quell-3DS**
+ ** Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/de_DE/installing-boot9strap-(hardmod).txt b/_pages/de_DE/installing-boot9strap-(hardmod).txt
index a2d2a5958d..951edeb716 100644
--- a/_pages/de_DE/installing-boot9strap-(hardmod).txt
+++ b/_pages/de_DE/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installieren von boot9strap (Hardmod)"
---
Eine exzellente Anleitung (auf Englisch) für einen Hardmod kannst du [hier](https://gbatemp.net/threads/414498/) finden. Falls dein Gerät ein New 3DS ist, lies [this](https://github.com/Plailect/Guide/issues/681) und [this](https://github.com/Plailect/Guide/issues/1185), bevor du ein Hardmod machst.
-{: .notice--info}
Dies ist eine zurzeit funktionierende Implementation des "FIRM Partitions Known-Plaintext"-Exploits. Details findest du [hier](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
Um die [Magnet-Links](https://en.wikipedia.org/wiki/Magnet_URI_scheme) auf dieser Seite zu nutzen, brauchst du einen Torrent-Programm wie [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Dies funktioniert auf mit New 3DS, New 2DS, Old 3DS und Old 2DS auf *allen* Versionen, für die du eine entsprechende `.firm`-Datei hast.
-{: .notice--success}
#### Was du brauchst
diff --git a/_pages/de_DE/installing-boot9strap-(homebrew-launcher).txt b/_pages/de_DE/installing-boot9strap-(homebrew-launcher).txt
index f5d1bf7a71..f06fd93e8c 100644
--- a/_pages/de_DE/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/de_DE/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installation von boot9strap (Homebrew Launcher)"
---
Falls du bereits deinen 3DS zuvor gehackt hast und eine EmuNAND basierte CFW installiert ist: Diese Anleitung behandelt nur das SysNAND und alle Schritte sollten nur innerhalb des SysNANDs ausgeführt/angewendet werden. Beachte, dass die Begriffe EmuNAND und RedNAND sich auf leicht unterschiedliche Implementierungen [des selben Konzepts](http://3dbrew.org/wiki/NAND_Redirection) beziehen.
-{: .notice--info}
#### Anleitung
@@ -20,6 +19,8 @@ Falls du bereits deinen 3DS zuvor gehackt hast und eine EmuNAND basierte CFW ins
+ Wenn du *weiterhin* den Fehler "PM INIT FAILED" bekommst, versuche den [r19 Release von Safehax](https://github.com/TiniVi/safehax/releases/tag/r19) zu benutzen
+ Wenn sich deine Konsole aufhängt, schalte sie durch langes halten des Power-Knopfes aus, und versuche es erneut
1. Wenn der Exploit erfolgreich war, wird nun direkt zum SafeBS9Installer gebootet
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Abschnitt II - Installation von boot9strap
diff --git a/_pages/de_DE/installing-boot9strap-(mset).txt b/_pages/de_DE/installing-boot9strap-(mset).txt
index fb47f13429..02a1523412 100644
--- a/_pages/de_DE/installing-boot9strap-(mset).txt
+++ b/_pages/de_DE/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installation von boot9strap (MSET)"
---
Falls du bereits deinen 3DS zuvor gehackt hast und eine EmuNAND basierte CFW installiert ist: Diese Anleitung behandelt nur das SysNAND und alle Schritte sollten nur innerhalb des SysNANDs ausgeführt/angewendet werden. Beachte, dass die Begriffe EmuNAND und RedNAND sich auf leicht unterschiedliche Implementierungen [des selben Konzepts](http://3dbrew.org/wiki/NAND_Redirection) beziehen.
-{: .notice--info}
#### Was du brauchst
diff --git a/_pages/de_DE/installing-boot9strap-(ntrboot).txt b/_pages/de_DE/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..2568dce5dd
--- /dev/null
+++ b/_pages/de_DE/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Was du brauchst
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* Die neueste Version von [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* Die neueste Version von [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; nicht die `devkit` Datei, nicht die `ntr` Datei)*
+* Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(die `.7z`-Datei)*
+* Das Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Anleitung
+
+##### Abschnitt I - Vorbereitung
+
+1. Schalte deinen 3DS aus
+1. Stecke deine SD-Karte in deinen Computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Kopiere _den Inhalt_ der `starter.zip` in das Stammverzeichnis der SD Karte
+1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte
+1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte
+
+ 
+ {: .notice--info}
+
+1. Stecke deine SD-Karte nun wieder in deinen 3DS
+1. Schalte deine Konsole an
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Schalte deinen 3DS aus
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. Wenn der Exploit erfolgreich war, wird nun direkt zum SafeBS9Installer gebootet
+
+##### Abschnitt III - Installation von boot9strap
+
+1. Warte auf alle Sicherheitsüberprüfungen
+1. Gib die Tastenkombination zur Bestätigung ein, wenn danach verlangt wird
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Abschnitt IV - Luma3DS konfigurieren
+
+1. Stecke deine SD-Karte in deinen Computer
+1. Delete `boot.firm` from the root of your SD card
+1. Kopiere die Datei `boot.firm` aus der Luma3DS `.7z` in das Stammverzeichnis deiner SD-Karte
+1. Stecke deine SD-Karte nun wieder in deinen 3DS
+1. Schalte deine Konsole an
+1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+ + Wenn du einen schwarzen Bildschirm bekommst, [lies diese Problembehandlung](troubleshooting#ts_sys_b9s)
+1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
+ + **"Show NAND or user string in System Settings"**
+1. Drücke (Start) zum Speichern und neustarten
+ + Falls ein Fehler angezeigt wird, fahre einfach mit der nächsten Seite fort
+
+___
+
+Gehe weiter zu [Setup fertigstellen](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Warte bis der Prozess beendet ist
+1. Drücke (B), um zum Hauptmenü zurückzukehren
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/de_DE/move-emunand.txt b/_pages/de_DE/move-emunand.txt
index 18b9f84aa4..a9d6ce1d98 100644
--- a/_pages/de_DE/move-emunand.txt
+++ b/_pages/de_DE/move-emunand.txt
@@ -3,10 +3,8 @@ title: "EmuNAND transferieren"
---
Dies ist ein Zusatzabschnitt zum Verschieben des Inhaltes eines vorherigen EmuNAND in die neue SysNAND CFW plus Entfernung des alten EmuNAND. Beachte, dass die Begriffe EmuNAND und RedNAND sich auf leicht unterschiedliche Implementierungen [des selben Konzepts](http://3dbrew.org/wiki/NAND_Redirection) beziehen.
-{: .notice--info}
-Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
-{: .notice--info}
+Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
**Du MUSST bereits Luma3DS und boot9strap oder arm9loaderhax installiert haben, um dies zu benutzen.**
{: .notice--danger}
diff --git a/_pages/de_DE/ntr-and-cubic-ninja.txt b/_pages/de_DE/ntr-and-cubic-ninja.txt
index a5cee55f03..c6f624008f 100644
--- a/_pages/de_DE/ntr-and-cubic-ninja.txt
+++ b/_pages/de_DE/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR und Cubic Ninja"
---
Um die [Magnet-Links](https://en.wikipedia.org/wiki/Magnet_URI_scheme) auf dieser Seite zu nutzen, brauchst du einen Torrent-Programm wie [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja wird NUR mit dem JPN New 3DS funktionieren!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Was du brauchst
diff --git a/_pages/de_DE/ntrboot.txt b/_pages/de_DE/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/de_DE/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/de_DE/region-changing.txt b/_pages/de_DE/region-changing.txt
index beb4a7a374..87320a82fb 100644
--- a/_pages/de_DE/region-changing.txt
+++ b/_pages/de_DE/region-changing.txt
@@ -3,16 +3,12 @@ title: "Wechseln der Region"
---
Dies ist eine zusätzliche Anleitung um die Region deines CFW SysNANDs zu ändern. Dies geschieht durch die Installation der 9.2.0 CTRTransfer Abbild für die Region, die du wechseln willst.
-{: .notice--primary}
-**Seit der Unterstützung überregionaler Spiele und Programme durch Luma3DS, sind Regionswechsel nahezu überflüssig. Siehe [Luma3DS - title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
Um die [Magnet-Links](https://en.wikipedia.org/wiki/Magnet_URI_scheme) auf dieser Seite zu nutzen, brauchst du einen Torrent-Programm wie [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
-{: .notice--info}
Durch diesen Vorgang wird die Verknüpfung deiner NNID mit der Konsole aufgehoben, da diese nicht mehr mit der neuen Region kompatibel ist. NNID's sind an die Region der Konsole gebunden, mit dem sie erstmalig erstellt wurden und können nur über [einen komplexen Prozess](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt),zwischen den verschiedenen Regionen, transferiert werden.
{: .notice--warning}
@@ -20,19 +16,14 @@ Durch diesen Vorgang wird die Verknüpfung deiner NNID mit der Konsole aufgehobe
Nach diesem Vorgang werden nur **New 3DS, welche den eShop noch nie zuvor besucht haben** und **alle Old 3DS** in der Lage sein den eShop zu besuchen, nachdem eine neue NNID in der neuen Region erstellt wurde. New 3DS, die schon einmal den eShop ihrer originalen Region besucht haben, können keine neue NNID erstellen und somit den eShop in der neuen Region nicht mehr besuchen!
{: .notice--warning}
-Beachte, dass der eShop ab und zu, aus unerklärlichen Gründen auf Geräten, auf denen er eigentlich funktionieren sollte, nicht aufrufbar ist. Dies liegt komplett an den Serven von Nintendo. Ich habe darauf absolut keinen Einfluss.
-{: .notice--warning}
-
-Ähnlich der oben stehenden Warnung, funktioniert der eShop unerwarteterweiße ab und zu mal auf Geräten, auf denen er nicht funktionieren sollte (wie auf manchen New 3DS). Die Ursache hierfür ist derzeit unbekannt.
-{: .notice--warning}
+Beachte, dass der eShop ab und zu, aus unerklärlichen Gründen auf Geräten, auf denen er eigentlich funktionieren sollte, nicht aufrufbar ist. Dies liegt komplett an den Serven von Nintendo. Ich habe darauf absolut keinen Einfluss. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Die Ursache hierfür ist derzeit unbekannt.
Regionswechsel, welche die CTRTransfer-Methode (welche in dieser Anleitung genutzt wird) benutzt wird, scheinen Neustartpatches nicht mehr zu funktionieren. Die Ursache hierfür ist unbekannt, jedoch können Old 3DS Nutzer aktuell keine Spiele im erweiterten Speichermodus spielen (Beispiele dafür sind: Monster Hunter, Super Smash Bros. und Pokemon Sonne/Mond), bis sie ihr System formatiert haben.
-{: .notice--warning}
-Formatiere niemals einen New 2DS, auf dem eine Systemsoftware Version <11.4.0 läuft, denn sonst kannst du die Erstinstallation nicht durchführen und hast einen BRICK!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**Du MUSST bereits Luma3DS und boot9strap oder arm9loaderhax installiert haben, um dies zu benutzen.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Was du brauchst
diff --git a/_pages/de_DE/site-navigation.txt b/_pages/de_DE/site-navigation.txt
index 5aa32009bd..881a23633e 100644
--- a/_pages/de_DE/site-navigation.txt
+++ b/_pages/de_DE/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [Datei-Erweiterungen (Windows)](file-extensions-(windows))
+ [Setup fertigstellen](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Los geht's (New 3DS)](get-started-(new-3ds))
+ [Los geht's (Old 3DS)](get-started-(old-3ds))
+ [Los geht's](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installation von boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installation von boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installation von boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installation von boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [EmuNAND verschieben](move-emunand)
+ [NTR und Cubic Ninja](ntr-and-cubic-ninja)
+ [Wechseln der Region](region-changing)
diff --git a/_pages/de_DE/troubleshooting.txt b/_pages/de_DE/troubleshooting.txt
index 9bc868d482..60d19872b0 100644
--- a/_pages/de_DE/troubleshooting.txt
+++ b/_pages/de_DE/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Problembehandlung"
Wenn deine Konsole nicht mehr starten sollte, suche bitte den für dich relevanten Abschnitt und folge den dortigen Anweisungen. Sollte das Problem gelöst sein, kannst du mit dem Rest der Anleitung fortfahren
(Der Abschnitt ist ziemlich lang. Benutze Strg+F, um nach deinem Problem zu suchen.)
-{: .notice--primary}
-**Wenn du dein Problem immer noch nicht lösen kannst und Hilfe brauchst, dann kopiere bitte alle relevanten .log Dateien aus dem Stammverzeichnis deiner SD-Karte in ein [Gist](https://gist.github.com/) und frage dann, mit einer detaillierten Beschreibung deines Problems und was du bereits versucht hast, nach.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
Um die [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) Links in dieser Anleitung zu verwenden, brauchst du einen Torrent Client wie [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi-/ DS-Funktionen sind nach erfolgreicher Benutzung der Anleitung unbenutzbar
diff --git a/_pages/de_DE/uninstall-cfw.txt b/_pages/de_DE/uninstall-cfw.txt
index c901045d7f..8da6695481 100644
--- a/_pages/de_DE/uninstall-cfw.txt
+++ b/_pages/de_DE/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "CFW deinstallieren"
---
Dies wird die CFW, einschließlich Boot9Strap und Luma3DS, vollständig von deinem Gerät entfernen, um dessen originalen Zustand wiederherzustellen.
-{: .notice--danger}
Alle unsignierten (nicht-legitimen) Spiele werden unbrauchbar und können manuell mit der Datenverwaltung in den Systemeinstellungen entfernt werden. Benutze einen [Speicherstandmanager](https://github.com/J-D-K/JKSM/releases/latest), um alle Speicherstände von unsignierten (nicht-legitimen) Spielen zu sichern, die du behalten möchtest.
-{: .notice--info}
Dies wird deine NNID, alle legitim gekauften Spielen und deren Speicherstände nicht beeinträchtigen.
-{: .notice--info}
Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
-{: .notice--info}
#### Was du brauchst
diff --git a/_pages/de_DE/updating-b9s.txt b/_pages/de_DE/updating-b9s.txt
index 0490f46b55..16ed9bac31 100644
--- a/_pages/de_DE/updating-b9s.txt
+++ b/_pages/de_DE/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "B9S aktualisieren"
---
Diese Seite ist für Nutzer, die bereits boot9strap nutzen, jedoch ihre Installation auf die aktuellste Version aktualisieren wollen.
-{: .notice--info}
Bitte beachte, dass die aktuelle Hauptversion von Luma3DS *nicht* mit boot9strap 1.0 kompatibel ist. Es *benötigt* ein Update deiner boot9strap-Installation zur Version 1.2, indem du der Anleitung hier auf der Seite folgst.
-{: .notice--warning}
{% capture notice-1 %}
Es gibt Berichte über eine Welle von Sperren, die von Nintendo für CFW-Nutzer ausgehändigt werden. Bevor du dieser Anleitung folgst, befolge diese Schritte, um dich selbst zu schützen:
diff --git a/_pages/el_GR/9.2.0-ctrtransfer.txt b/_pages/el_GR/9.2.0-ctrtransfer.txt
index 3150a0f60d..51fb653abb 100644
--- a/_pages/el_GR/9.2.0-ctrtransfer.txt
+++ b/_pages/el_GR/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/el_GR/a9lh-to-b9s.txt b/_pages/el_GR/a9lh-to-b9s.txt
index 696093d869..111ef924f9 100644
--- a/_pages/el_GR/a9lh-to-b9s.txt
+++ b/_pages/el_GR/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/el_GR/cart-update.txt b/_pages/el_GR/cart-update.txt
index bb72c7afbf..c0354b5ea4 100644
--- a/_pages/el_GR/cart-update.txt
+++ b/_pages/el_GR/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
Όλες οι κασέτες περιέχουν την απαιτούμενη έκδοση συστήματος για να λειτουργήσουν επιτρέποντας σε όσους βρίσκονται σε χαμηλότερη έκδοση τη χρήση της κασέτας για αναβάθμιση έκδοσης (ακόμα και χωρίς σύνδεση στο διαδίκτυο).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! Θα χρειαστείτε μία [εναλλακτική μέθοδο](homebrew-launcher-(εναλλακτικές)) για να εισέλθετε στο Ηomebrew Launcher!
+
+Αυτό σημαίνει πως η αναβάθμιση από κασέτα ΔΕΝ θα εγκαταστήσει το πρόγραμμα περιήγησης, εάν δεν έχετε ήδη ένα. Θα αναβαθμίσει **μόνο** την έκδοση του συστήματος *(για παράδειγμα, 2.1.0-0 -> 6.0.0-0)*. Ο τελευταίος αριθμός *(το-0)* **δεν** θα αλλάξει.
{% endcapture %}
{{ notice-1 | markdownify }}
-Αυτό σημαίνει πως η αναβάθμιση από κασέτα ΔΕΝ θα εγκαταστήσει το πρόγραμμα περιήγησης, εάν δεν έχετε ήδη ένα. Θα αναβαθμίσει **μόνο** την έκδοση του συστήματος *(για παράδειγμα, 2.1.0-0 -> 6.0.0-0)*. Ο τελευταίος αριθμός *(το-0)* **δεν** θα αλλάξει.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/el_GR/credits.txt b/_pages/el_GR/credits.txt
index d450d142ae..8246cba853 100644
--- a/_pages/el_GR/credits.txt
+++ b/_pages/el_GR/credits.txt
@@ -9,7 +9,6 @@ title: "Συντελεστές"
{: .notice--primary}
Εάν σας ξέχασα, επικοινωνήστε μαζί μου ώστε να προσθέσω το όνομά σας.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/el_GR/f3-(linux).txt b/_pages/el_GR/f3-(linux).txt
index 59edd503e0..a60914a8b1 100644
--- a/_pages/el_GR/f3-(linux).txt
+++ b/_pages/el_GR/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Ανάλογα με το μέγεθος της κάρτας SD και την ταχύτητα του υπολογιστή σας, αυτή η διαδικασία ενδέχεται να διαρκέσει πολλές ώρες!
-{: .notice--info}
Αυτή η σελίδα είναι μόνο για χρήστες Linux. Εάν δεν είστε σε Linux, ελέγξτε τις σελίδες [H2testw (windows)](h2testw-(windows)) ή [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Τι χρειάζεστε
diff --git a/_pages/el_GR/f3x-(mac).txt b/_pages/el_GR/f3x-(mac).txt
index 8c390d8bc5..e2aea93260 100644
--- a/_pages/el_GR/f3x-(mac).txt
+++ b/_pages/el_GR/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Ανάλογα με το μέγεθος της κάρτας SD και την ταχύτητα του υπολογιστή σας, αυτή η διαδικασία ενδέχεται να διαρκέσει πολλές ώρες!
-{: .notice--info}
Αυτή η σελίδα είναι μόνο για χρήστες Mac. Εάν δεν είστε σε Mac, δείτε τις σελίδες [H2testw (windows)](h2testw-(windows)) ή [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### Τι χρειάζεστε
diff --git a/_pages/el_GR/faq.txt b/_pages/el_GR/faq.txt
index bdf2f561b5..61b9831494 100644
--- a/_pages/el_GR/faq.txt
+++ b/_pages/el_GR/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Ε:** *Βρίσκομαι στην τελευταία έκδοση λογισμικού, μπορεί η συσκευή μου να χακαριστεί;*
**A:** Yes
-
+
**Ε:** *Πώς ενημερώνω το Luma3DS;*
**Α:** Χρησιμοποιώντας το Luma3DS Updater
-
+
**Ε:** Άκουσα για κάτι για το οποίο πρέπει να πληρώσω (Gateway, Sky3DS, κλπ.), είναι απαραίτητο;*
**A:** Όχι. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Ε:** *Πώς μεταφέρω τα αρχεία αποθήκευσης από μία Gateway σε παιχνίδια εγκατεστημένα στην συσκευή;*
**A:** Δείτε [this](https://gbatemp.net/threads/425743/)
-
+
** E: ** *Τι χρειάζομαι για να ακολουθήσω αυτόν τον οδηγό;*
**A:** Ο οδηγός αυτός μπορεί να ολοκληρωθεί με δωρεάν λογισμικό
-
+
**Ε:** *Υπάρχει κίνδυνος όταν χακάρω την κονσόλα μου;*
**Α:** Τώρα πλέον, είναι *βασικά* αδύνατον να αχρηστεύσετε την συσκευή σας, εκτός και αν αγνοείστε/προσπεράσετε όλα τα μέτρα ασφαλείας.
-
+
**E:** *Μπορώ να χρησιμοποιήσω τα απίστευτα homebrew και emulators με αυτόν τον οδηγό;*
**Α:** Ναι! Το Custom Firmware όχι μόνο επιτρέπει την χρήση του Homebrew Launcher, αλλά σας προσφέρει επίσης hacks για όλες τις εκδόσεις, που σημαίνει ότι θα το κρατήσετε για πάντα, ακόμη και με ενημερώσεις.
-
+
**E:** *Μπορώ να χρησιμοποιήσω αυτό τον οδηγώ για να παίξω παιχνίδια από άλλες περιοχές;*
**Α:** Το Luma3DS υποστηρίζει patch για Region Free, τα οποία επιτρέπουν στους χρήστες να εγκαταστήσουν παιχνίδια από οποιαδήποτε περιοχή χωρίς περαιτέρω τροποποιήσεις.
-
+
**Ε:** *Είναι ασφαλές να ενημερώσω τη SysNAND του CFW;*
**Α:** Ναι. Είναι ασφαλές, σταματήστε να το ρωτάτε.
-
+
**Ε:** *Πού θα έπρεπε να πάω για υποστήριξη;*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Ε:** *Μπορώ να πραγματοποιήσω τον οδηγό με μια κάρτα SD των 4GB (ή μικρότερη);*
**Α:** Ναι!
-
+
**Ε:** *Μπορώ να χρησιμοποιήσω μια κάρτα SD των 128 GB (ή μεγαλύτερη);*
**Α:** Ναι, αλλά κάποιοι χρήστες έχουν αναφέρει καθυστερήσεις κατά χρήση τόσο μεγάλων μεγεθών. Σημειώστε πως δεν μπορείτε να διαμορφώσετε την κάρτα με exFAT· χρειάζεστε να την διαμορφώσετε με FAT32.
-
+
**Ε:** *Πώς αλλάζω κάρτα SD στο τέλος αυτού του οδηγού:*
**Α:** Απλά αντιγράψτε όλα τα αρχεία στην καινούργια κάρτα SD.
-
+
**Ε:** *Μπορώ να διατηρήσω το NNID μου;*
**Α:** Εάν αρχίσετε με ένα NNID και ακολουθήσετε κάθε βήμα, στο τέλος θα καταλήξετε να διατηρήσετε το NNID σας.
-
+
**E:** *Σχετικά με τα System Transfers;*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Ε:** *Μπορώ να πραγματοποιήσω τον οδηγό χωρίς την χρήση υπολογιστή (π.χ. ενός τηλεφώνου Android);*
**Α:** Το μόνο που χρειάζεστε είναι η ικανότητα να τοποθετείτε αρχεία στην κάρτα SD!
-
+
**Ε:** *Βοήθεια! Κάτι άσχημο συνέβη και δεν μπορώ να πραγματοποιήσω εκκίνηση...*
**Α:** Επισκεφθείτε την [Αντιμετώπιση Προβλημάτων](troubleshooting).
diff --git a/_pages/el_GR/file-extensions-(windows).txt b/_pages/el_GR/file-extensions-(windows).txt
index df21214837..074ee533f2 100644
--- a/_pages/el_GR/file-extensions-(windows).txt
+++ b/_pages/el_GR/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Οδηγίες
diff --git a/_pages/el_GR/finalizing-setup.txt b/_pages/el_GR/finalizing-setup.txt
index 6fe01d9456..bb98bc454c 100644
--- a/_pages/el_GR/finalizing-setup.txt
+++ b/_pages/el_GR/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Επισκόπηση των βημάτων
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
Σε αυτήν την περίπτωση, θα χρησιμοποιήσουμε το Luma3DS του χρήστη [AuroraWright](https://github.com/AuroraWright/) ώστε να εκκινήσουμε απευθείας μια επεξεργασμένη έκδοση της SysNAND, που μας επιτρέπει να παρακάμψουμε την ανάγκη για μια EmuNAND, απλοποιώντας έτσι την χρήση ενός χακαρισμένου 3DS και απελευθερώνοντας χώρο στην κάρτα SD.
-
+
Ταυτόχρονα, θα εγκαταστήσουμε προγράμματα όπως τα παρακάτω:
+ **FBI** *(Εγκαθιστά εφαρμογές και παιχνίδια που έχουν την μορφή CIA)*
@@ -18,10 +17,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Τι χρειάζεστε
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-Μπορείτε να ενημερώσετε το Luma3DS, χρησιμοποιώντας το Luma3DS Updater, απλώς ανοίγοντάς το και πατώντας το (A).
+Μπορείτε να ενημερώσετε το Luma3DS, χρησιμοποιώντας το Luma3DS Updater, απλώς ανοίγοντάς το και πατώντας το (A).
+
Δεν είναι το ίδιο με την Ενημέρωση Συστήματος· το μόνο που κάνει είναι να κατεβάσει και να αποσυμπιέσει τα τελευταία αρχεία του Luma3DS.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
Μπορείτε να πατήσετε (Select) κατά την εκκίνηση ώστε να ανοίξετε τις ρυθμίσεις του Luma3DS.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/el_GR/flashing-ntrboot-(custom-firmware).txt b/_pages/el_GR/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..9fe653c23e
--- /dev/null
+++ b/_pages/el_GR/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Τι χρειάζεστε
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Οδηγίες
+
+##### Ενότητα I - Προετοιμασία
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Περιμένετε μέχρι να ολοκληρωθεί η διαδικασία
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Περιμένετε μέχρι να ολοκληρωθεί η διαδικασία
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/el_GR/flashing-ntrboot-(powersaves).txt b/_pages/el_GR/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/el_GR/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/el_GR/get-started-(new-3ds).txt b/_pages/el_GR/get-started-(new-3ds).txt
index 750e7ec809..05b1a738b1 100644
--- a/_pages/el_GR/get-started-(new-3ds).txt
+++ b/_pages/el_GR/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα.
-{: .notice--primary}
+Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. Note that the "from" and "to" fields are inclusive. Αυτό σημαίνει πως, για παράδειγμα, η σειρά "από 9.0.0 έως 9.2.0" περιλαμβάνει τις εκδόσεις 9.0.0, 9.1.0, 9.2.0.
-Note that the "from" and "to" fields are inclusive. Αυτό σημαίνει πως, για παράδειγμα, η σειρά "από 9.0.0 έως 9.2.0" περιλαμβάνει τις εκδόσεις 9.0.0, 9.1.0, 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/el_GR/get-started-(old-3ds).txt b/_pages/el_GR/get-started-(old-3ds).txt
index 58a2dbace3..15a9ae572d 100644
--- a/_pages/el_GR/get-started-(old-3ds).txt
+++ b/_pages/el_GR/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα.
-{: .notice--primary}
+Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. Note that the "from" and "to" fields are inclusive. Αυτό σημαίνει πως, για παράδειγμα, η σειρά "από 9.0.0 έως 9.2.0" περιλαμβάνει τις εκδόσεις 9.0.0, 9.1.0, 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Εάν η έκδοση είναι -0 τότε δεν έχετε πρόγραμμα περιήγησης, ενώ κάθε αριθμός πάνω από το -0 υποδεικνύει ότι υπάρχει εγκατεστημένο πρόγραμμα περιήγησης.
-{% capture notice-1 %}
-Οι 2 τελευταίες στήλες του διαγράμματος αναφέρονται στο τελευταίο νούμερο της έκδοσής σας (που αντιστοιχεί στην έκδοση του περιηγητή ιστού που έχετε εγκατεστημένο στο σύστημα). Εάν η έκδοση είναι -0 τότε δεν έχετε πρόγραμμα περιήγησης, ενώ κάθε αριθμός πάνω από το -0 υποδεικνύει ότι υπάρχει εγκατεστημένο πρόγραμμα περιήγησης.
-
-Τα πεδία "από" και "έως" είναι περιεκτικά. Αυτό σημαίνει πως, για παράδειγμα, η σειρά "από 9.0.0 έως 9.2.0" περιλαμβάνει τις εκδόσεις 9.0.0, 9.1.0, 9.2.0.
-
Στην περίπτωση της έκδοσης "5.0.0-0U" για παράδειγμα, θα ακολουθούσατε την στήλη "Χωρίς Πρόγραμμα Περιήγησης" και τη σειρά 5.0.0 έως 5.1.1, διότι το σύστημα είναι στην έκδοση εκείνης της εμβέλειας και δεν έχει πρόγραμμα περιήγησης εγκατεστημένο.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Εάν ενημερώσατε χρησιμοποιώντας μια κασέτα παιχνιδιού η οποία περιείχε την έκδοση 9.9.0 και πάνω *(που σημαίνει πως βρίσκετε στην έκδοση 9.9.0 και πάνω, αλλά το πρόγραμμα περιήγησης είναι σε έκδοση -25 και κάτω, όπως 10.2.0-24)*, το πρόγραμμα περιήγησης σας αφαιρέθηκε και θα πρέπει να χρησιμοποιήσετε την στήλη "Χωρίς Πρόγραμμα Περιήγησης".
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+Εάν ενημερώσατε χρησιμοποιώντας μια κασέτα παιχνιδιού η οποία περιείχε την έκδοση 9.9.0 και πάνω *(που σημαίνει πως βρίσκετε στην έκδοση 9.9.0 και πάνω, αλλά το πρόγραμμα περιήγησης είναι σε έκδοση -25 και κάτω, όπως 10.2.0-24)*, το πρόγραμμα περιήγησης σας αφαιρέθηκε και θα πρέπει να χρησιμοποιήσετε την στήλη "Χωρίς Πρόγραμμα Περιήγησης".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/el_GR/get-started.txt b/_pages/el_GR/get-started.txt
index c7f49962a5..71710c8550 100644
--- a/_pages/el_GR/get-started.txt
+++ b/_pages/el_GR/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Αυτή η σελίδα θα σας βοηθήσει να βρείτε από που να αρχίσετε για τη συσκευή σας.
-Τα χρώματα των συσκευών που απεικονίζονται μπορεί να ποικίλουν, αλλά προσέξτε την τοποθέτηση των κουμπιών και τα χαρακτηριστικά της κάθε μίας, έτσι ώστε να είστε σίγουροι πως επιλέξατε τη σωστή συσκευή.
-{: .notice}
-
-Πατήστε στην εικόνα της συσκευής σας έτσι ώστε να μεταφερθείτε στην κατάλληλη σελίδα.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. Αυτή η σελίδα θα σας βοηθήσει να βρείτε από που να αρχίσετε για τη συσκευή σας.
-{: .notice--info}
+Πατήστε στην εικόνα της συσκευής σας έτσι ώστε να μεταφερθείτε στην κατάλληλη σελίδα. Τα χρώματα των συσκευών που απεικονίζονται μπορεί να ποικίλουν, αλλά προσέξτε την τοποθέτηση των κουμπιών και τα χαρακτηριστικά της κάθε μίας, έτσι ώστε να είστε σίγουροι πως επιλέξατε τη σωστή συσκευή.
Εάν έχετε ήδη χακάρει το 3DS σας πριν και έχετε ήδη μια εγκατάσταση CFW βασισμένη σε emuNAND, απλώς ακολουθήστε τις οδηγίες ενώ βρίσκεστε στη SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Πριν αρχίσετε, συνιστάται να ελέγξετε την κάρτα SD για σφάλματα χρησιμοποιώντας το [H2testw (Windows)](h2testw-(windows)), το [F3 (Linux)](f3-(linux)), ή το [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/el_GR/godmode9-usage.txt b/_pages/el_GR/godmode9-usage.txt
index e13231a05c..b33ffffe8b 100644
--- a/_pages/el_GR/godmode9-usage.txt
+++ b/_pages/el_GR/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/el_GR/h2testw-(windows).txt b/_pages/el_GR/h2testw-(windows).txt
index 592d2900cd..4d3ca83dbb 100644
--- a/_pages/el_GR/h2testw-(windows).txt
+++ b/_pages/el_GR/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Ανάλογα με το μέγεθος της κάρτας SD και την ταχύτητα του υπολογιστή σας, αυτή η διαδικασία ενδέχεται να διαρκέσει πολλές ώρες!
-{: .notice--info}
Αυτή η σελίδα είναι μόνο για χρήστες Windows. Εάν δεν είστε σε Windows, ελέγξτε τις σελίδες [F3 (linux)](f3-(linux)) ή [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Τι χρειάζεστε
diff --git a/_pages/el_GR/home.txt b/_pages/el_GR/home.txt
index 0820e3b25a..7d39ccdfc8 100644
--- a/_pages/el_GR/home.txt
+++ b/_pages/el_GR/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
** Custom Firmware ** («CFW») σας επιτρέπει να χρησιμοποιήσετε πιο προηγμένα hacks που το userland homebrew δεν μπορεί εύκολα να κάνει. Για παράδειγμα, τα patches στην υπογραφή του κώδικα σας επιτρέπουν να εγκαταστήσετε τίτλους χωρίς υπογραφή που θα εμφανίζονται στο HOME Menu σας.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Τι εγκαθιστά αυτός ο οδηγός;
diff --git a/_pages/el_GR/homebrew-launcher-(alternatives).txt b/_pages/el_GR/homebrew-launcher-(alternatives).txt
index 0174917491..a97a9f99a9 100644
--- a/_pages/el_GR/homebrew-launcher-(alternatives).txt
+++ b/_pages/el_GR/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
To Ηomebrew Launcher έχει πολλές διαφορετικές μεθόδους εισόδου ή μεθόδους εκκίνησης.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### Τι χρειάζεστε
diff --git a/_pages/el_GR/homebrew-launcher-(soundhax).txt b/_pages/el_GR/homebrew-launcher-(soundhax).txt
index ab26402c9a..4a932a508f 100644
--- a/_pages/el_GR/homebrew-launcher-(soundhax).txt
+++ b/_pages/el_GR/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
To Ηomebrew Launcher έχει πολλές διαφορετικές μεθόδους εισόδου.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/el_GR/installing-boot9strap-(browser).txt b/_pages/el_GR/installing-boot9strap-(browser).txt
index f5646a49c5..058c8aa7f2 100644
--- a/_pages/el_GR/installing-boot9strap-(browser).txt
+++ b/_pages/el_GR/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Σημειώστε ότι οι όροι EmuNAND και RedNAND αναφέρονται σε ελαφρώς διαφορετικές υλοποιήσεις [της ίδιας έννοιας](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Τι χρειάζεστε
diff --git a/_pages/el_GR/installing-boot9strap-(dsiware).txt b/_pages/el_GR/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/el_GR/installing-boot9strap-(dsiware).txt
+++ b/_pages/el_GR/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/el_GR/installing-boot9strap-(dsiware-game-injection).txt b/_pages/el_GR/installing-boot9strap-(dsiware-game-injection).txt
index 91bfcbad2f..f55d8b3145 100644
--- a/_pages/el_GR/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/el_GR/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Τι χρειάζεστε
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/el_GR/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/el_GR/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/el_GR/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/el_GR/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/el_GR/installing-boot9strap-(dsiware-save-injection).txt b/_pages/el_GR/installing-boot9strap-(dsiware-save-injection).txt
index 6bd678be49..00c84649ad 100644
--- a/_pages/el_GR/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/el_GR/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Τι χρειάζεστε
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/el_GR/installing-boot9strap-(hardmod).txt b/_pages/el_GR/installing-boot9strap-(hardmod).txt
index 1590801ed3..20eb87cb1a 100644
--- a/_pages/el_GR/installing-boot9strap-(hardmod).txt
+++ b/_pages/el_GR/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### Τι χρειάζεστε
diff --git a/_pages/el_GR/installing-boot9strap-(homebrew-launcher).txt b/_pages/el_GR/installing-boot9strap-(homebrew-launcher).txt
index f17e2a6acc..1ea388e9b8 100644
--- a/_pages/el_GR/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/el_GR/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Σημειώστε ότι οι όροι EmuNAND και RedNAND αναφέρονται σε ελαφρώς διαφορετικές υλοποιήσεις [της ίδιας έννοιας](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Οδηγίες
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Εάν παγώσει, επιβάλλετε το κλείσιμο της κονσόλας κρατώντας πατημένο το κουμπί ενεργοποίησης και δοκιμάστε ξανά
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/el_GR/installing-boot9strap-(mset).txt b/_pages/el_GR/installing-boot9strap-(mset).txt
index 60707bac22..09314f7be2 100644
--- a/_pages/el_GR/installing-boot9strap-(mset).txt
+++ b/_pages/el_GR/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Σημειώστε ότι οι όροι EmuNAND και RedNAND αναφέρονται σε ελαφρώς διαφορετικές υλοποιήσεις [της ίδιας έννοιας](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Τι χρειάζεστε
diff --git a/_pages/el_GR/installing-boot9strap-(ntrboot).txt b/_pages/el_GR/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..82a33fdd3f
--- /dev/null
+++ b/_pages/el_GR/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Τι χρειάζεστε
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Την τελευταία έκδοση του [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* Το Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Οδηγίες
+
+##### Ενότητα I - Προετοιμασία
+
+1. Power off your device
+1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Περιμένετε μέχρι να ολοκληρωθεί η διαδικασία
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/el_GR/move-emunand.txt b/_pages/el_GR/move-emunand.txt
index affb3668e5..6070b60cf3 100644
--- a/_pages/el_GR/move-emunand.txt
+++ b/_pages/el_GR/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Σημειώστε ότι οι όροι EmuNAND και RedNAND αναφέρονται σε ελαφρώς διαφορετικές υλοποιήσεις [της ίδιας έννοιας](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/el_GR/ntr-and-cubic-ninja.txt b/_pages/el_GR/ntr-and-cubic-ninja.txt
index 601bf6f521..385a7d59c1 100644
--- a/_pages/el_GR/ntr-and-cubic-ninja.txt
+++ b/_pages/el_GR/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**Το NTR Cubic Ninja δουλεύει ΜΟΝΟ σε JPN New 3DS!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Τι χρειάζεστε
diff --git a/_pages/el_GR/ntrboot.txt b/_pages/el_GR/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/el_GR/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/el_GR/region-changing.txt b/_pages/el_GR/region-changing.txt
index 30150ec262..e49c94a277 100644
--- a/_pages/el_GR/region-changing.txt
+++ b/_pages/el_GR/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Η αλλαγή της περιοχής σας είναι σχεδόν άχρηστη, καθώς το Luma3DS υποστηρίζει παιχνίδια εκτός περιοχής και ξεχωριστή [προσομοίωση περιοχών τίτλου](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Αυτή η διαδικασία θα αποσυνδέσει το NNID σας από το σύστημα, καθώς δεν θα είναι πλέον συμβατό με αυτό. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
Μετά από αυτήν την διαδικασία, μόνο **τα New 3DS που δεν έχουν ξαναχρησιμοποιήσει το eShop πριν** και **οποιοδήποτε Old 3DS** θα μπορούν να αποκτήσουν πρόσβαση στο eShop μετά από την δημιουργία ενός καινούργιου NNID για την καινούργια περιοχή. New 3DS τα οποία είχαν χρησιμοποιήσει το eShop στην αρχική περιοχή της συσκευής δεν μπορούν να δημιουργήσουν καινούργιο NNID και να αποκτήσουν πρόσβαση στο eShop στην καινούργια περιοχή!
{: .notice--warning}
-Σημειώστε ότι σποραδικά το eShop δεν θα λειτουργεί, χωρίς λόγο, σε συσκευές στις οποίες θα έπρεπε. Έχει να κάνει αποκλειστικά με του διακομιστές της Nintendo και δεν μπορώ να έχω καθόλου έλεγχο, όσον αφορά αυτό το θέμα.
-{: .notice--warning}
-
-Παρόμοια με την παραπάνω προειδοποίηση, σημειώστε ότι κάποιες φορές το eShop θα λειτουργεί, χωρίς κάποια εξήγηση, για συσκευές που δεν θα έπρεπε κανονικά να λειτουργεί (όπως κάποια New 3DSs). Η αιτία γι' αυτό είναι, προς το παρόν, άγνωστη.
-{: .notice--warning}
+Σημειώστε ότι σποραδικά το eShop δεν θα λειτουργεί, χωρίς λόγο, σε συσκευές στις οποίες θα έπρεπε. Έχει να κάνει αποκλειστικά με του διακομιστές της Nintendo και δεν μπορώ να έχω καθόλου έλεγχο, όσον αφορά αυτό το θέμα. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Η αιτία γι' αυτό είναι, προς το παρόν, άγνωστη.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Τι χρειάζεστε
diff --git a/_pages/el_GR/site-navigation.txt b/_pages/el_GR/site-navigation.txt
index b769398ea3..0cd3c6f9ab 100644
--- a/_pages/el_GR/site-navigation.txt
+++ b/_pages/el_GR/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [Συχνές Ερωτήσεις](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Ας αρχίσουμε (New 3DS)](get-started-(new-3ds))
+ [Ας αρχίσουμε (Old 3DS)](get-started-(old-3ds))
+ [Ας αρχίσουμε](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Μετακίνηση της EmuNAND](move-emunand)
+ [NTR και Cubic Ninja](ntr-and-cubic-ninja)
+ [Αλλαγή Περιοχής](region-changing)
diff --git a/_pages/el_GR/troubleshooting.txt b/_pages/el_GR/troubleshooting.txt
index 14be001b9c..7e310e4109 100644
--- a/_pages/el_GR/troubleshooting.txt
+++ b/_pages/el_GR/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Μόλις μια λύση λειτουργήσει για εσάς, μπορείτε να προχωρήσετε με τον κύριο οδηγό
(Η παρακάτω ενότητα είναι σχετικά μεγάλη, χρησιμοποιήστε το Ctrl+F για να αναζητήσετε το πρόβλημά σας.)
-{: .notice--primary}
-**Εάν, παρ' όλα αυτά, δεν καταφέρετε να επιλύσετε το πρόβλημα και χρειάζεστε περαιτέρω βοήθεια, παρακαλείσθε να αντιγράψετε όλα τα περιεχόμενα των σχετικών αρχείων .log από την ρίζα της κάρτας SD στο [Gist](https://gist.github.com/), και έπειτα να έρθετε για βοήθεια προετοιμασμένοι με μια αναλυτική περιγραφή του προβλήματός σας και των μέσων που προσπαθήσατε να χρησιμοποιήσετε για την επίλυσή του.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## Οι λειτουργίες του DSi / DS δεν λειτουργούν έπειτα από την ολοκλήρωση του οδηγού
diff --git a/_pages/el_GR/uninstall-cfw.txt b/_pages/el_GR/uninstall-cfw.txt
index 1407a427e0..db12be91d1 100644
--- a/_pages/el_GR/uninstall-cfw.txt
+++ b/_pages/el_GR/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### Τι χρειάζεστε
diff --git a/_pages/el_GR/updating-b9s.txt b/_pages/el_GR/updating-b9s.txt
index 8c2f0db891..5b8e0bf130 100644
--- a/_pages/el_GR/updating-b9s.txt
+++ b/_pages/el_GR/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/en_PT/9.2.0-ctrtransfer.txt b/_pages/en_PT/9.2.0-ctrtransfer.txt
index ddef2ed16d..d855096202 100644
--- a/_pages/en_PT/9.2.0-ctrtransfer.txt
+++ b/_pages/en_PT/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To be usin' th' [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on 'tis page, ye gunna be needin' a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or ye gunna be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/en_PT/a9lh-to-b9s.txt b/_pages/en_PT/a9lh-to-b9s.txt
index 08256b80e2..0b1a461f99 100644
--- a/_pages/en_PT/a9lh-to-b9s.txt
+++ b/_pages/en_PT/a9lh-to-b9s.txt
@@ -2,18 +2,15 @@
title: "A9LH to B9S"
---
-This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
+'Tis page be fer existin' arm9loaderhax users to be updatin' their devices to boot9strap.
-All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+All future releases 'o Luma3DS gunna only be made in th' `.firm` format, which gunna only be workin' on systems wit' boot9strap 'n sighax. 'Tis means that if ye want to continue to be receivin' th' latest updates 'o Luma3DS, ye should use 'tis page to be updatin' ye installation.
+
+To be usin' th' [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on 'tis page, ye gunna be needin' a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If ye have a PIN enabled on Luma3DS, SafeB9SInstaller gunna be givin' ye an "OTP Crypto Fail" error unless ye temporarily disable ye PIN (ye can be re-enablin' th' PIN after th' update).
{: .notice--warning}
-To be usin' th' [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on 'tis page, ye gunna be needin' a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports 'o a wave 'o bans bein' handed out to CFW users by Nintendo. Fer ye protection, please be followin' these steps before startin' 'tis guide:
@@ -35,15 +32,15 @@ There have been reports 'o a wave 'o bans bein' handed out to CFW users by Ninte
Note that th' followin' required file, named `secret_sector.bin`, be th' same one that was found in th' various `data_input.zip` file versions. If ye already have that file on ye hard disk somewhere, ye can be usin' that one instead 'o downloadin' th' one below.
{: .notice--info}
-Note that, on New 3DS, `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console. If you do not have a New 3DS, you do not need `secret_sector.bin`.
+Note that on a New 3DS, `secret_sector.bin` be needed to revert th' arm9loaderhax exploit, which be why it be not needed fer th' installation 'o boot9strap on a stock console. If ye do not have a New 3DS, ye gunna not be needin' `secret_sector.bin`.
{: .notice--info}
* - **New 3DS Users Only:** [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
* Th' latest release 'o [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(th' `.7z` file)*
* Th' latest release 'o [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Th' latest release 'o [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not th' `devkit` file, 'n not th' `ntr` file)*
* Th' latest release 'o [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
-* The latest fork of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
+* Th' latest fork 'o [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
* Th' Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
* [`setup_ctrnand_luma3ds.gm9`]({{ base_path }}/gm9_scripts/setup_ctrnand_luma3ds.gm9)
@@ -56,38 +53,38 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card.
1. Power off ye device
1. Insert ye SD card into ye computer
-1. Copy _the contents of_ `starter.zip` to the root of your SD card
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
1. Create a folder named `cias` on th' root 'o ye SD card if it does not already exist
-1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
+1. Copy `lumaupdater.cia` to th' `/cias/` folder on ye SD card
1. Create a folder named `boot9strap` on th' root 'o ye SD card
-1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions
+1. Delete any existin' `.bin` payloads in th' `/luma/payloads/` folder on ye SD card, as they gunna be incompatible wit' boot9strap Luma3DS versions
1. Copy `GodMode9.firm` from th' GodeMode9 `.zip` to th' `/luma/payloads/` folder on ye SD card
1. Copy th' `gm9` folder from th' GodMode9 `.zip` to th' root 'o ye SD card
1. Copy `setup_ctrnand_luma3ds.gm9` to th' `/gm9/scripts/` folder on ye SD card
-1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
-1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
+1. Copy `SafeB9SInstaller.bin` from th' SafeB9SInstaller `.zip` to th' `/luma/payloads/` folder on ye SD card
+1. Rename `SafeB9SInstaller.bin` in th' `/luma/payloads/` folder on ye SD card to `start_SafeB9SInstaller.bin`
1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card
-1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
+1. **New 3DS Users Only:** Copy `secret_sector.bin` to th' `/boot9strap/` folder on ye SD card
{: .notice--info}
1. Reinsert ye SD card into ye device
-##### Section II - Installing boot9strap
+##### Section II - Installin' boot9strap
1. Boot ye device while holdin' (Start) to be launchin' th' Luma3DS chainloader menu
- + Some versions of Luma3DS will just directly start whichever payload begins with `start_`
- + If your version does this, just proceed with the instructions
-1. Launch SafeB9SInstaller by pressing (A) on it
- + If this gives you an error, try either using a new SD card, or formatting your current SD card (backup existing files first)
-1. Wait for all safety checks to complete
- + If you get an "OTP Crypto Fail" error, download - [`aeskeydb.bin`](magnet:?xt=urn:btih:621f8af00638cb2b00d5bd0c6816543fa00b5fb1&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
+ + Some versions 'o Luma3DS gunna jus' directly start whichever payload be beginnin' wit' `start_`
+ + If ye version does 'tis, jus' proceed wit' th' instructions
+1. Launch SafeB9SInstaller by pressin' (A) on it
+ + If 'tis be givin' ye an error, try either usin' a new SD card, or formattin' ye current SD card (backup th' existin' files first)
+1. Wait fer all safety checks to be completed
+ + If ye get an "OTP Crypto Fail" error, download - [`aeskeydb.bin`](magnet:?xt=urn:btih:621f8af00638cb2b00d5bd0c6816543fa00b5fb1&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. When prompted, input th' key combo given to be installin' boot9strap
-1. Once it has completed, press (A) to reboot your device.
- + If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Once it has completed, press (A) to be rebootin' ye device.
+ + If ye device shuts down on boot, ensure that ye have copied `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
##### Section III - Configuring Luma3DS
diff --git a/_pages/en_PT/cart-update.txt b/_pages/en_PT/cart-update.txt
index 0d56a40815..3bddd46f3f 100644
--- a/_pages/en_PT/cart-update.txt
+++ b/_pages/en_PT/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy 'o th' required system version to play it, allowin' anyone on a lower version to use th' cartridge to update to that version (even without an Internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates gunna only be deliverin' updates to core features, such as th' System Settin's, Home Menu, etc. Cart Updates gunna not be deliverin' updates to Nintendo 3DS Sound 'n Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
'Tis be meanin' that usin' a Cart Update from a version containin' an older Nintendo 3DS Sound version *(<7.0.0 fer Old 3DSes in th' EUR, JPN, KOR, 'n USA regions)* to one that introduced a newer Nintendo 3DS Sound version gunna be breakin' [Soundhax](homebrew-launcher-(soundhax))! Ye gunna be needin' an [alternate method](homebrew-launcher-(alternatives)) 'o enterin' th' Homebrew Launcher!
+
+'Tis also means that a cart update gunna NOT be installin' a browser if ye do not already have one. 'Tis gunna **only** be updatin' th' actual system version *(fer example, 2.1.0-0 -> 6.0.0-0)*. Th' last number *(th' -0)* gunna **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-'Tis also means that a cart update gunna NOT be installin' a browser if ye do not already have one. 'Tis gunna **only** be updatin' th' actual system version *(fer example, 2.1.0-0 -> 6.0.0-0)*. Th' last number *(th' -0)* gunna **not** change.
-{: .notice--warning}
-
**Updatin' wit' a game cart containin' th' version 9.9.0 or above gunna be removin' ye browser 'til a standard online update be performed!**
{: .notice--danger}
diff --git a/_pages/en_PT/credits.txt b/_pages/en_PT/credits.txt
index 789069510d..3a3512dda3 100644
--- a/_pages/en_PT/credits.txt
+++ b/_pages/en_PT/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot ye here, be contactin' me 'n I gunna be addin' ye name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/en_PT/f3-(linux).txt b/_pages/en_PT/f3-(linux).txt
index f360a01ea4..38384a7fa7 100644
--- a/_pages/en_PT/f3-(linux).txt
+++ b/_pages/en_PT/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
'Tis be an add-on section fer checkin' ye SD card fer errors usin' F3.
-{: .notice--info}
Dependin' on th' size 'o ye SD card 'n th' speed 'o ye computer, 'tis process can take up to several hours!
-{: .notice--info}
'Tis page be fer Linux users only. If ye are not on Linux, check out th' [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What ye need
diff --git a/_pages/en_PT/f3x-(mac).txt b/_pages/en_PT/f3x-(mac).txt
index d1a9a4ac87..13c95d1142 100644
--- a/_pages/en_PT/f3x-(mac).txt
+++ b/_pages/en_PT/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
'Tis be an add-on section fer checkin' ye SD card fer errors usin' F3X.
-{: .notice--info}
Dependin' on th' size 'o ye SD card 'n th' speed 'o ye computer, 'tis process can take up to several hours!
-{: .notice--info}
'Tis page be fer Mac users only. If ye be not on Mac, check out th' [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What ye need
diff --git a/_pages/en_PT/faq.txt b/_pages/en_PT/faq.txt
index 9c8fe71d1c..797b26d8d0 100644
--- a/_pages/en_PT/faq.txt
+++ b/_pages/en_PT/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I be on th' latest system version, be me device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about 'tis thin' I have to pay fer (Gateway, Sky3DS, etc), be that somethin' I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/en_PT/file-extensions-(windows).txt b/_pages/en_PT/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/en_PT/file-extensions-(windows).txt
+++ b/_pages/en_PT/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/en_PT/finalizing-setup.txt b/_pages/en_PT/finalizing-setup.txt
index f4f417a32e..18ab8e1448 100644
--- a/_pages/en_PT/finalizing-setup.txt
+++ b/_pages/en_PT/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizin' Setup"
#### Overview 'o steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
Durin' 'tis process, we also setup programs such as th' followin':
+ **FBI** *(installs CIA formatted games 'n applications)*
@@ -18,10 +17,6 @@ Durin' 'tis process, we also setup programs such as th' followin':
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What ye need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -42,7 +37,7 @@ Durin' 'tis process, we also setup programs such as th' followin':
1. Create a folder named `cias` on th' root 'o ye SD card if it does not already exist
1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from th' hblauncher_loader `.zip` to th' `/cias/` folder on ye SD card
-1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
+1. Copy `lumaupdater.cia` to th' `/cias/` folder on ye SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
1. Copy `DSP1.cia` to the `/cias/` folder on your SD card
1. Copy `Themely.cia` to the `/cias/` folder on your SD card
@@ -135,8 +130,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-Ye can now use Luma3DS Updater to update ye Luma3DS to th' latest version just by openin' it 'n pressin' (A).
+Ye can now use Luma3DS Updater to update ye Luma3DS to th' latest version just by openin' it 'n pressin' (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -144,9 +141,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
Ye can now hold (Select) on boot to launch th' Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -157,7 +158,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/en_PT/flashing-ntrboot-(custom-firmware).txt b/_pages/en_PT/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..c7210cd119
--- /dev/null
+++ b/_pages/en_PT/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What ye need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Set th' sails (prep work)
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait 'til th' process be completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait 'til th' process be completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/en_PT/flashing-ntrboot-(powersaves).txt b/_pages/en_PT/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/en_PT/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/en_PT/get-started-(new-3ds).txt b/_pages/en_PT/get-started-(new-3ds).txt
index ff3f8e36f2..2fb22cb7df 100644
--- a/_pages/en_PT/get-started-(new-3ds).txt
+++ b/_pages/en_PT/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select th' appropriate page fer ye version from th' chart below.
-{: .notice--primary}
+Select th' appropriate page fer ye version from th' chart below. Note that th' "from" 'n "to" fields be inclusive. 'Tis means that, fer example, th' "from 9.0.0 to 9.2.0" row be includin' 9.0.0, 9.1.0, 'n 9.2.0.
-Note that th' "from" 'n "to" fields be inclusive. 'Tis means that, fer example, th' "from 9.0.0 to 9.2.0" row be includin' 9.0.0, 9.1.0, 'n 9.2.0.
-{: .notice--info}
-
-Note that th' last number 'o ye system version (which follows th' dash) be referrin' to ye browser version. Currently, th' browser version be irrelevant to th' New 3DS in 'tis guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, th' browser version be irrelevant to th' New 3DS in 'tis guide.
Fer all versions ye can also [Cart Update](cart-update) to a higher version in th' same column to follow its instructions.
-{: .notice--info}
Ye device version can be found at th' bottom right 'o th' top screen 'o th' System Settin's.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Ye device version can be found at th' bottom right 'o th' top screen 'o th' Syst
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/en_PT/get-started-(old-3ds).txt b/_pages/en_PT/get-started-(old-3ds).txt
index 62ae6227cc..bec7f299d3 100644
--- a/_pages/en_PT/get-started-(old-3ds).txt
+++ b/_pages/en_PT/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select th' appropriate page fer ye version from th' chart below.
-{: .notice--primary}
+Select th' appropriate page fer ye version from th' chart below. Note that th' "from" 'n "to" fields be inclusive. 'Tis means that, fer example, th' "from 9.0.0 to 9.2.0" row be includin' 9.0.0, 9.1.0, 'n 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If th' version be -0 then ye do not have a browser, while any number above -0 indicates a browser be installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If th' version be -0 then ye do not have a browser, while any number above -0 indicates a browser be installed.
-
-Th' "from" 'n "to" fields be inclusive. 'Tis means that, fer example, th' "from 9.0.0 to 9.2.0" row be includin' 9.0.0, 9.1.0, 'n 9.2.0.
-
In th' case 'o "5.0.0-0U" fer example, ye would follow th' "No Browser" column 'n 5.0.0 to 5.1.0 row because th' system be on th' a system version in that range 'n has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
Fer all versions ye can also [Cart Update](cart-update) to a higher version in th' same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates gunna not be deliverin' updates to Nintendo 3DS Sound 'n Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-'Tis be meanin' that usin' a Cart Update from a version containin' an older Nintendo 3DS Sound version *(<7.0.0 fer Old 3DSes in th' EUR, JPN, KOR, 'n USA regions)* to one that introduced a newer Nintendo 3DS Sound version gunna be breakin' [Soundhax](homebrew-launcher-(soundhax))! Ye gunna be needin' an [alternate method](homebrew-launcher-(alternatives)) 'o enterin' th' Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If ye updated wit' a game cart containin' th' version 9.9.0 or above *(meanin' that ye have a version on 9.9.0 or above, but ye browser be on -25 or lower, such as 10.2.0-24)*, ye browser was removed 'n ye gunna need to be usin' th' "No Browser" column.
-{: .notice--warning}
Ye device version can be found at th' bottom right 'o th' top screen 'o th' System Settin's.
-{: .notice--success}
{: .notice--info}
+If ye updated wit' a game cart containin' th' version 9.9.0 or above *(meanin' that ye have a version on 9.9.0 or above, but ye browser be on -25 or lower, such as 10.2.0-24)*, ye browser was removed 'n ye gunna need to be usin' th' "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/en_PT/get-started.txt b/_pages/en_PT/get-started.txt
index bc4fa52ba6..e7099b3230 100644
--- a/_pages/en_PT/get-started.txt
+++ b/_pages/en_PT/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-Th' colors 'o th' devices in th' image may vary, but note th' button placement 'n features 'o each device carefully to ensure ye be selectin' th' correct one.
-{: .notice}
-
-Click th' image 'o ye device to take ye to th' appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click th' image 'o ye device to take ye to th' appropriate page. Th' colors 'o th' devices in th' image may vary, but note th' button placement 'n features 'o each device carefully to ensure ye be selectin' th' correct one.
If ye have already hacked ye 3DS before 'n be havin' an EmuNAND based CFW setup, jus' follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before startin', ye may want to check ye SD card fer errors usin' [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/en_PT/godmode9-usage.txt b/_pages/en_PT/godmode9-usage.txt
index ac989d2aa1..c415dd8cf1 100644
--- a/_pages/en_PT/godmode9-usage.txt
+++ b/_pages/en_PT/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/en_PT/h2testw-(windows).txt b/_pages/en_PT/h2testw-(windows).txt
index 71f1cf41f1..6bf0cbf11f 100644
--- a/_pages/en_PT/h2testw-(windows).txt
+++ b/_pages/en_PT/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
'Tis be an add-on section fer checkin' ye SD card fer errors usin' h2testw.
-{: .notice--info}
Dependin' on th' size 'o ye SD card 'n th' speed 'o ye computer, 'tis process can take up to several hours!
-{: .notice--info}
'Tis page be fer Windows users only. If ye be not on windows, check out th' [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What ye need
diff --git a/_pages/en_PT/home.txt b/_pages/en_PT/home.txt
index 5a24834e4b..ca42aa2311 100644
--- a/_pages/en_PT/home.txt
+++ b/_pages/en_PT/home.txt
@@ -37,8 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables ye to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that be on 11.5.0 or under.
-
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does 'tis guide install?
diff --git a/_pages/en_PT/homebrew-launcher-(alternatives).txt b/_pages/en_PT/homebrew-launcher-(alternatives).txt
index 7dfc553db6..878659708f 100644
--- a/_pages/en_PT/homebrew-launcher-(alternatives).txt
+++ b/_pages/en_PT/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure ye device's Wireless Communication be turned on as udsploit (used in th' next page) gunna need th' wireless module to be active to function, 'n some devices (New 3DS, New 2DS, 'n Old 2DS) cannot adjust th' Wireless Communication setting from th' Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
@@ -26,7 +23,7 @@ Ensure ye device's Wireless Communication be turned on as udsploit (used in th'
1. Power off your device
1. Insert ye SD card into ye computer
1. Copy _the contents of_ the `starter.zip` to the root of your SD card
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card
diff --git a/_pages/en_PT/homebrew-launcher-(soundhax).txt b/_pages/en_PT/homebrew-launcher-(soundhax).txt
index ad5395d44b..f04fa61400 100644
--- a/_pages/en_PT/homebrew-launcher-(soundhax).txt
+++ b/_pages/en_PT/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Th' Homebrew Launcher has many different entrypoints, or methods 'o launchin'.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure ye device's Wireless Communication be turned on as udsploit (used in th' next page) gunna need th' wireless module to be active to function, 'n some devices (New 3DS, New 2DS, 'n Old 2DS) cannot adjust th' Wireless Communication setting from th' Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates gunna not be deliverin' updates to Nintendo 3DS Sound 'n Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
'Tis be meanin' that usin' a Cart Update from a version containin' an older Nintendo 3DS Sound version *(<7.0.0 fer Old 3DSes in th' EUR, JPN, KOR, 'n USA regions)* to one that introduced a newer Nintendo 3DS Sound version gunna be breakin' [Soundhax](homebrew-launcher-(soundhax))! Ye gunna be needin' an [alternate method](homebrew-launcher-(alternatives)) 'o enterin' th' Homebrew Launcher!
{% endcapture %}
@@ -36,10 +33,10 @@ Note that Cart Updates will only deliver updates to core features, such as the S
1. Power off your device
1. Insert ye SD card into ye computer
-1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
1. Copy the Soundhax `.m4a` to the root of your SD card
1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin`
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card
diff --git a/_pages/en_PT/installing-boot9strap-(2xrsa).txt b/_pages/en_PT/installing-boot9strap-(2xrsa).txt
index 5a3726d72e..8e47b39ff1 100644
--- a/_pages/en_PT/installing-boot9strap-(2xrsa).txt
+++ b/_pages/en_PT/installing-boot9strap-(2xrsa).txt
@@ -16,8 +16,8 @@ title: "Installing boot9strap (2xrsa)"
1. Power off your device
1. Insert ye SD card into ye computer
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
-1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
+1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `arm9.bin` and `arm11.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
@@ -40,7 +40,7 @@ title: "Installing boot9strap (2xrsa)"
##### Section III - Installing boot9strap
-1. Wait for all safety checks to complete
+1. Wait fer all safety checks to be completed
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, press (A) to reboot your device
diff --git a/_pages/en_PT/installing-boot9strap-(browser).txt b/_pages/en_PT/installing-boot9strap-(browser).txt
index cce8533efb..ace09dc20b 100644
--- a/_pages/en_PT/installing-boot9strap-(browser).txt
+++ b/_pages/en_PT/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that th' terms EmuNAND 'n RedNAND be referrin' to slightly different implementations 'o [th' same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What ye need
@@ -19,8 +18,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
1. Power off your device
1. Insert ye SD card into ye computer
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
-1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
+1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card
@@ -44,7 +43,7 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
##### Section III - Installing boot9strap
-1. Wait for all safety checks to complete
+1. Wait fer all safety checks to be completed
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, press (A) to reboot your device
diff --git a/_pages/en_PT/installing-boot9strap-(dsiware).txt b/_pages/en_PT/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/en_PT/installing-boot9strap-(dsiware).txt
+++ b/_pages/en_PT/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/en_PT/installing-boot9strap-(dsiware-game-injection).txt b/_pages/en_PT/installing-boot9strap-(dsiware-game-injection).txt
index d6e25fe91a..be0027cb5c 100644
--- a/_pages/en_PT/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/en_PT/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To be usin' th' [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on 'tis page, ye gunna be needin' a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceedin', ensure ye have read all 'o th' notices 'n warnin's on [Installin' boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What ye need
-* Two 3DS systems
- + **Th' source 3DS**: th' 3DS runnin' some sort 'o custom firmware (such as boot9strap or arm9loaderhax) *on th' latest version*
- + **Th' target 3DS**: th' 3DS on stock firmware, *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A copy 'o th' game obtained outside 'o Nintendo's intended methods gunna **not** be workin'
+ Fer a list 'o compatible games, see th' [Installin' boot9strap (DSiWare Game Injection List)[(installing-boot9strap-(dsiware-game-injection-list)) page
@@ -135,7 +135,7 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
##### Section V - Backing up the target 3DS's FIRM
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
1. Copy `boot.nds` to the root of **the target 3DS**'s SD card
1. Copy _the contents of_ `starter.zip` to the root of **the target 3DS**'s SD card
1. Create a folder named `boot9strap` on the root of **the target 3DS**'s SD card
diff --git a/_pages/en_PT/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/en_PT/installing-boot9strap-(dsiware-game-injection-list).txt
index b1de61b9ea..4df1535670 100644
--- a/_pages/en_PT/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/en_PT/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installin' boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/en_PT/installing-boot9strap-(dsiware-save-injection).txt b/_pages/en_PT/installing-boot9strap-(dsiware-save-injection).txt
index b914f49278..87cdf9af0b 100644
--- a/_pages/en_PT/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/en_PT/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To be usin' th' [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on 'tis page, ye gunna be needin' a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceedin', ensure ye have read all 'o th' notices 'n warnin's on [Installin' boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What ye need
-* Two 3DS systems
- + **Th' source 3DS**: th' 3DS runnin' some sort 'o custom firmware (such as boot9strap or arm9loaderhax) *on th' latest version*
- + **Th' target 3DS**: th' 3DS on stock firmware, *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
@@ -144,7 +141,7 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
##### Section V - Backing up the target 3DS's FIRM
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
1. Copy `boot.nds` to the root of **the target 3DS**'s SD card
1. Copy _the contents of_ `starter.zip` to the root of **the target 3DS**'s SD card
1. Create a folder named `boot9strap` on the root of **the target 3DS**'s SD card
diff --git a/_pages/en_PT/installing-boot9strap-(hardmod).txt b/_pages/en_PT/installing-boot9strap-(hardmod).txt
index 78bcc7507d..f7941b873e 100644
--- a/_pages/en_PT/installing-boot9strap-(hardmod).txt
+++ b/_pages/en_PT/installing-boot9strap-(hardmod).txt
@@ -4,16 +4,12 @@ title: "Installing boot9strap (Hardmod)"
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If ye be on a New 3DS, read ['tis](https://github.com/Plailect/Guide/issues/681) and ['tis](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To be usin' th' [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on 'tis page, ye gunna be needin' a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What ye need
@@ -61,15 +57,15 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
##### Section I - Set th' sails (prep work)
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
-1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
+1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
1. Copy the hardmod-b9s-installer folder from the hardmod-b9s-installer `.zip` to your computer
1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
-##### Section II - Installing boot9strap
+##### Section II - Installin' boot9strap
1. Run hardmod-b9s-installer
+ Windows Users: Run `install-b9s.exe`
diff --git a/_pages/en_PT/installing-boot9strap-(homebrew-launcher).txt b/_pages/en_PT/installing-boot9strap-(homebrew-launcher).txt
index 2e5374c42a..14d9ba77ad 100644
--- a/_pages/en_PT/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/en_PT/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that th' terms EmuNAND 'n RedNAND be referrin' to slightly different implementations 'o [th' same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,10 +19,12 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
-##### Section II - Installing boot9strap
+##### Section II - Installin' boot9strap
-1. Wait for all safety checks to complete
+1. Wait fer all safety checks to be completed
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, press (A) to reboot your device
diff --git a/_pages/en_PT/installing-boot9strap-(mset).txt b/_pages/en_PT/installing-boot9strap-(mset).txt
index df397daac4..9784690f28 100644
--- a/_pages/en_PT/installing-boot9strap-(mset).txt
+++ b/_pages/en_PT/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that th' terms EmuNAND 'n RedNAND be referrin' to slightly different implementations 'o [th' same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What ye need
@@ -20,8 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
1. Power off your device
1. Insert ye SD card into ye computer
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
-1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
+1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `SafeB9SInstaller.dat` from the SafeB9SInstaller `.zip` to the root of your SD card
@@ -45,7 +44,7 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
##### Section III - Installing boot9strap
-1. Wait for all safety checks to complete
+1. Wait fer all safety checks to be completed
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, press (A) to reboot your device
diff --git a/_pages/en_PT/installing-boot9strap-(ntrboot).txt b/_pages/en_PT/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..1ca8d7e6c5
--- /dev/null
+++ b/_pages/en_PT/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,84 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What ye need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* Th' latest release 'o [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* Th' latest release 'o [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not th' `devkit` file, not th' `ntr` file)*
+
+* Th' latest release 'o [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(th' `.7z` file)*
+* Th' Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Set th' sails (prep work)
+
+1. Power off your device
+1. Insert ye SD card into ye computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert ye SD card into ye device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait fer all safety checks to be completed
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert ye SD card into ye computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
+1. Reinsert ye SD card into ye device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If ye be gettin' an error, jus' continue to th' next page
+
+___
+
+Continue to [Finalizin' Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait 'til th' process be completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/en_PT/move-emunand.txt b/_pages/en_PT/move-emunand.txt
index d078ea5857..d6eb924cc6 100644
--- a/_pages/en_PT/move-emunand.txt
+++ b/_pages/en_PT/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
'Tis be an add-on section fer movin' th' contents 'o a previous EmuNAND to ye new SysNAND CFW, then removin' the ol' EmuNAND partition. Note that th' terms EmuNAND 'n RedNAND be referrin' to slightly different implementations 'o [th' same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**Ye MUST have already installed Luma3DS 'n boot9strap or arm9loaderhax to be usin' 'tis.**
{: .notice--danger}
diff --git a/_pages/en_PT/ntr-and-cubic-ninja.txt b/_pages/en_PT/ntr-and-cubic-ninja.txt
index fcd5ddff59..181754e530 100644
--- a/_pages/en_PT/ntr-and-cubic-ninja.txt
+++ b/_pages/en_PT/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To be usin' th' [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on 'tis page, ye gunna be needin' a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What ye need
@@ -37,7 +36,7 @@ To be usin' th' [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links
1. Click the WAMP icon in your system tray, then click "Put Online"
1. Use the command `ipconfig /all` in CMD to get your computer's IPv4 Address, you will need it soon
1. Copy `ntr.bin` to the root of your SD card
-1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
1. Put your SD card back into your device
##### Section II - Updating
diff --git a/_pages/en_PT/ntrboot.txt b/_pages/en_PT/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/en_PT/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/en_PT/region-changing.txt b/_pages/en_PT/region-changing.txt
index 8a5903695a..cfe50c64ac 100644
--- a/_pages/en_PT/region-changing.txt
+++ b/_pages/en_PT/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To be usin' th' [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on 'tis page, ye gunna be needin' a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or ye gunna be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**Ye MUST have already installed Luma3DS 'n boot9strap or arm9loaderhax to be usin' 'tis.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What ye need
diff --git a/_pages/en_PT/site-navigation.txt b/_pages/en_PT/site-navigation.txt
index c93d40b709..a3dfbb899f 100644
--- a/_pages/en_PT/site-navigation.txt
+++ b/_pages/en_PT/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizin' Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installin' boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installin' boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installin' boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installin' boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR 'n Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changin'](region-changing)
diff --git a/_pages/en_PT/troubleshooting.txt b/_pages/en_PT/troubleshooting.txt
index d093f8d7a1..85061f5880 100644
--- a/_pages/en_PT/troubleshooting.txt
+++ b/_pages/en_PT/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshootin'"
If ye be unable to boot ye device, please be lookin' fer th' section relevant to ye, 'n follow th' instructions. Once a solution be workin' fer ye, ye can proceed on wit' th' main guide
('Tis section be fairly long, try usin' Ctrl+F to search fer ye issue.)
-{: .notice--primary}
-**If ye still cannot solve ye issue 'n need to be reachin' out fer help, please paste th' contents 'o all relevant .log files from th' root 'o ye SD card into a [Gist](https://gist.github.com/), then come fer help prepared wit' a detailed description 'o ye problem 'n what ye've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To be usin' th' [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on 'tis page, ye gunna be needin' a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality be broken after completin' th' guide
diff --git a/_pages/en_PT/uninstall-cfw.txt b/_pages/en_PT/uninstall-cfw.txt
index b78adda074..752447a6d1 100644
--- a/_pages/en_PT/uninstall-cfw.txt
+++ b/_pages/en_PT/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What ye need
diff --git a/_pages/en_PT/updating-b9s.txt b/_pages/en_PT/updating-b9s.txt
index 087aef6997..c2a50a7314 100644
--- a/_pages/en_PT/updating-b9s.txt
+++ b/_pages/en_PT/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
@@ -43,7 +41,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Power off your device
1. Insert ye SD card into ye computer
1. **Leave the old (v7.1) version of Luma3DS (`boot.firm`) as it is. You will update this later.**
-1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `GodMode9.firm` from th' GodeMode9 `.zip` to th' `/luma/payloads/` folder on ye SD card
1. Copy th' `gm9` folder from th' GodMode9 `.zip` to th' root 'o ye SD card
@@ -53,13 +51,13 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Reinsert ye SD card into ye device
-##### Section II - Installing boot9strap
+##### Section II - Installin' boot9strap
1. Reboot holdin' (Start) durin' boot to launch th' Luma3DS chainloader menu
1. Launch SafeB9SInstaller by pressing (A)
-1. Wait for all safety checks to complete
+1. Wait fer all safety checks to be completed
1. When prompted, input the key combo given to install boot9strap
-1. Once it has completed, press (A) to reboot your device.
+1. Once it has completed, press (A) to be rebootin' ye device.
1. Power off your device
+ Note that you will receive the error `Unsupported launcher (argc = 0)` until you follow the rest of the instructions on this page
@@ -67,7 +65,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Insert ye SD card into ye computer
1. Delete the existing `boot.firm` from the root of your SD card
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
1. Reinsert ye SD card into ye device
##### Section IV - Configuring Luma3DS
diff --git a/_pages/es_ES/9.2.0-ctrtransfer.txt b/_pages/es_ES/9.2.0-ctrtransfer.txt
index 96c5685ceb..2e7dfad080 100644
--- a/_pages/es_ES/9.2.0-ctrtransfer.txt
+++ b/_pages/es_ES/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
Esta es una sección adicional para instalar una imagen CTRTransfer 9.2.0 en tu consola.
-{: .notice--primary}
Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en la carpeta `/luma/payloads/` en tu tarjeta SD, al mantener (Start) al inicio se desplegará un "chainloader menu" donde tendrás que usar el D-Pad y pulsar (A) para seleccionar "GodMode9", para esas instrucciones.
-{: .notice--info}
Nunca formatees una New 2DS que esté en la versión <11.4.0 ¡o no podrás completar la configuración inicial!
{: .notice--danger}
diff --git a/_pages/es_ES/a9lh-to-b9s.txt b/_pages/es_ES/a9lh-to-b9s.txt
index 0a361e6108..552a926965 100644
--- a/_pages/es_ES/a9lh-to-b9s.txt
+++ b/_pages/es_ES/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH a B9S"
---
Esta página es para los usuarios actuales de arm9loaderhax que deseen actualizar sus consolas a boot9strap.
-{: .notice--info}
Todas las versiones futuras de Luma3DS serán sólo en formato `.firm`, el cual será únicamente compatible con boot9strap y sighax. Esto significa que para continuar recibiendo las últimas actualizaciones de Luma3DS, deberás utilizar esta página para continuar con tu instalación.
-{: .notice--info}
+
+Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
Si tienes un PIN activado en Luma3DS, SafeB9SInstaller te dará el error "OTP Crypto Fail", a menos que desactives temporalmente tu PIN (lo puedes volver a activar luego de actualizar).
{: .notice--warning}
-Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
Ha habido reportes de olas de baneos a usuarios de CFW por parte de Nintendo. Para protegerte, puedes realizar los siguientes pasos antes de seguir esta guía:
diff --git a/_pages/es_ES/cart-update.txt b/_pages/es_ES/cart-update.txt
index bb7541dda0..cd2504904c 100644
--- a/_pages/es_ES/cart-update.txt
+++ b/_pages/es_ES/cart-update.txt
@@ -3,20 +3,18 @@ title: "Actualizar con Cartucho"
---
Todos los cartuchos contienen una copia de la versión del sistema necesaria para jugarlo, permitiendo a cualquiera usarlo para actualizar desde una versión inferior (incluso sin conexión a internet).
-{: .notice--info}
{% capture notice-1 %}
Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los elementos claves de la versión, como la Configuración de la consola, el menú HOME, etc. Las actualizaciones por cartucho no afectarán a Nintendo 3DS Sound ni a funcionalidades en línea, como la Transferencia de Sistema, el Navegador de internet, la Plaza Mii o la eShop.
-
+
¡Esto significa que actualizar mediante cartucho a una versión que contenga una versión más antigua de Nintendo 3DS Sound *(<7.0.0 para las Old 3DS en las regiones EUR, JPN, KOR, y USA)* a una que introdujo una versión más nueva de Nintendo 3DS Sound hará que [Soundhax](homebrew-launcher-(soundhax)) deje de funcionar! ¡Necesitarás un [método alternativo](homebrew-launcher-(alternatives)) para entrar al Homebrew Launcher!
+
+Esto además significa que una actualización por cartucho no instalará el navegador si no lo tenías previamente. Esto **sólo** actualizará tu versión del sistema *(por ejemplo, 2.1.0-0 -> 6.0.0-0)*. El último número *(el -0)* **no** cambiará.
{% endcapture %}
{{ notice-1 | markdownify }}
-Esto además significa que una actualización por cartucho no instalará el navegador si no lo tenías previamente. Esto **sólo** actualizará tu versión del sistema *(por ejemplo, 2.1.0-0 -> 6.0.0-0)*. El último número *(el -0)* **no** cambiará.
-{: .notice--warning}
-
**¡Actualizar mediante un cartucho que contenga la versión 9.9.0 o superior eliminará tu navegador hasta que se ejecute una actualización normal en línea!**
{: .notice--danger}
diff --git a/_pages/es_ES/credits.txt b/_pages/es_ES/credits.txt
index c04663564c..edb5093373 100644
--- a/_pages/es_ES/credits.txt
+++ b/_pages/es_ES/credits.txt
@@ -10,7 +10,6 @@ asombrosos!**
{: .notice--primary}
Si te olvidé, puedes contactarme para añadir tu nombre.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/es_ES/f3-(linux).txt b/_pages/es_ES/f3-(linux).txt
index e969502725..f738ee3bfd 100644
--- a/_pages/es_ES/f3-(linux).txt
+++ b/_pages/es_ES/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
Esta es una sección adicional para revisar tu tarjeta SD en busca de errores usando F3.
-{: .notice--info}
Dependiendo del tamaño de tu tarjeta SD y la velocidad de tu computadora, ¡este proceso podría tardar varias horas!
-{: .notice--info}
Esta página es solo para usuarios de Linux. Si no estás en Linux, revisa las páginas [H2testw (windows)](h2testw-(windows)) o [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Qué necesitas
diff --git a/_pages/es_ES/f3x-(mac).txt b/_pages/es_ES/f3x-(mac).txt
index a697a348da..974ae8143a 100644
--- a/_pages/es_ES/f3x-(mac).txt
+++ b/_pages/es_ES/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
Esta es una sección adicional para revisar tu tarjeta SD en busca de errores usando F3X.
-{: .notice--info}
Dependiendo del tamaño tu tarjeta SD y la velocidad de tu computadora, ¡este proceso puede tardar varias horas!
-{: .notice--info}
Esta página es sólo para usuarios de Mac. Si no estás en Mac, revisa las páginas [H2testw (windows)](h2testw-(windows)) o [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### Qué necesitas
diff --git a/_pages/es_ES/faq.txt b/_pages/es_ES/faq.txt
index ae16b81845..30e42288a2 100644
--- a/_pages/es_ES/faq.txt
+++ b/_pages/es_ES/faq.txt
@@ -6,52 +6,52 @@ title: "Preguntas Frecuentes"
**P:** *Estoy en la última versión de sistema, ¿mi consola es hackeable?*
**R:** Si
-
+
**P:** *¿Cómo actualizo Luma3DS?*
**R:** Utiliza Luma3DS Updater
-
+
**P:** *Me han hablado de esta cosa que vale dinero (Gateway, Sky3DS, etc), ¿es algo que necesito?*
**R:** No. boot9strap es un método superior de carga de hax que se ejecuta al iniciarse la consola.
-
+
**P:** *Cómo muevo partidas de una configuración Gateway existente a juegos instalados en la consola?*
**R:** Lee [esto](https://gbatemp.net/threads/425743/) (*en inglés*)
-
+
**P:** *¿Qué necesito para seguir esta guía?*
**R:** Esta guía puede realizarse completamente con software gratuito
-
+
**P:** *¿Qué tan arriesgado es hackear mi consola?*
**R:** Dejar inutilizable la consola es *básicamente* imposible a no ser que ignores o te saltes las medidas de seguridad.
-
+
**P:** *¿Puedo ejecutar homebrews y emuladores con esto?*
**R:** ¡Sí! Un Custom Firmware no sólo activa el Homebrew Launcher, si no que además te dará hacks en todas las versiones, por lo tanto lo tendrás para siempre, incluso si actualizas el sistema.
-
+
**P:** *¿Puedo jugar a juegos de otras regiones con esto?*
**R:** Luma3DS soporta parches Region Free, que permite instalar juegos de cualquier región sin ninguna modificación o ningún paso extra.
-
+
**P:** *¿Es seguro actualizar un CFW SysNAND?*
**R:** Si. Es seguro, no vuelvas a preguntarlo.
-
+
**P:** *¿A dónde debería ir para pedir ayuda?*
**R:** Para soporte, puedes pedir ayuda (*en inglés*) en el [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp)
-
+
**P:** *¿Puedo hacer esto con una tarjeta SD de 4GB (o más pequeña)?*
**R:** ¡Sí!
-
+
**P:** *¿Puedo usar una tarjeta SD de 128 GB (o mayor)?*
**R:** Sí, pero varios usuarios han notificado ralentizaciones cuando se utilizan archivos de tan gran tamaño. Ten en cuenta que no puedes formatear la tarjeta con exFAT; tienes que formatearla con FAT32.
-
+
**P:** *¿Cómo puedo transferir mis archivos a una nueva tarjeta SD al final de todo esto?*
**R:** Simplemente copia todos los archivos a la nueva tarjeta SD.
-
+
**P:** *¿Puedo conservar mi NNID?*
**R:** Si empiezas con un NNID y sigues todos los pasos, al final conservarás tu NNID.
-
+
**P:** *¿Qué hay de las Transferencias de Sistema?*
**R:** Una vez que hayas completado la guía, puedes realizar transferencias del sistema desde una consola 3DS o 2DS con boot9strap tal y como lo harías con una consola sin modificar o con EmuNAND (perderás todos los juegos/temas/DLCs que no sean legales en la transferencia; los datos de guardado se quedarán, incluidos los de juegos perdidos).
-
+
**P:** *¿Puedo hacer esto sin una computadora? (ej. un teléfono Android)?*
**R:** ¡Lo único que necesitas es tener la opción de meter archivos en una tarjeta SD!
-
+
**P:** *¡Ayuda! Algo malo sucedió y ahora mi consola no inicia...*
**R:** Por favor, mira la [guía de resolución de problemas](troubleshooting).
diff --git a/_pages/es_ES/file-extensions-(windows).txt b/_pages/es_ES/file-extensions-(windows).txt
index 7a3faa9176..7b94083ad3 100644
--- a/_pages/es_ES/file-extensions-(windows).txt
+++ b/_pages/es_ES/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "Extensiones de archivo (Windows)"
---
Esta es una sección adicional para desactivar el comportamiento por defecto de Windows de ocultar las extensiones de archivos.
-{: .notice--info}
Esto te facilitará encontrar los archivos referenciados en el resto de esta guía.
-{: .notice--info}
#### Instrucciones
diff --git a/_pages/es_ES/finalizing-setup.txt b/_pages/es_ES/finalizing-setup.txt
index 682873becd..706299412e 100644
--- a/_pages/es_ES/finalizing-setup.txt
+++ b/_pages/es_ES/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizar instalación"
#### Descripción general de pasos
-{% capture notice-2 %}
El archivo `boot.firm` es el que ejecuta boot9strap después de que termina de cargarse desde la NAND, y puede ser cualquier payload arm9 válido en formato FIRM. Este archivo puede ser reemplazado en cualquier momento, a pesar de que Luma3DS permite la ejecución de otros payloads arm9 en formato FIRM usando el selector de payloads de Luma3DS.
-
+
En este caso, utilizamos Luma3DS de [AuroraWright](https://github.com/AuroraWright/) para ejecutar al inicio un SysNAND modificado directamente, permitiéndonos saltar la necesidad de cualquier EmuNAND, simplificando enormemente el uso de una 3DS hackeada además de ahorrar espacio en la tarjeta SD.
-
+
Durante este proceso, también instalaremos programas como los siguientes:
+ **FBI** *(instala juegos y aplicaciones en formato CIA)*
@@ -18,10 +17,6 @@ Durante este proceso, también instalaremos programas como los siguientes:
+ **GodMode9** *(herramienta multipropósito que puede realizar funciones sobre la NAND y cartridges)*
+ **Homebrew Launcher Loader** *(inicia el Homebrew Launcher como una aplicación regular gracias a la magia de Rosalina)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Qué necesitas
* La última versión de [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(el archivo `.cia`)*
@@ -134,8 +129,10 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
___
{% capture notice-10 %}
-Ahora ya puedes usar Luma3DS Updater para actualizar tu Luma3DS a la última versión con tan solo abrirlo y presionar (A).
+Ahora ya puedes usar Luma3DS Updater para actualizar tu Luma3DS a la última versión con tan solo abrirlo y presionar (A).
+
No es lo mismo que las actualizaciones de sistema, sólo descarga y extrae los archivos de Luma3DS más recientes.
+
Esto sólo actualizará los archivos de Luma3DS de tu tarjeta SD. Si enciendes la consola sin una tarjeta SD, usará cualquier versión que tengas instalada en la CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ Esto sólo actualizará los archivos de Luma3DS de tu tarjeta SD. Si enciendes l
{% capture notice-6 %}
Ahora se iniciará el CFW Luma3DS en la SysNAND por defecto.
+
Ahora puedes mantener pulsado (Select) mientras la consola arranca para acceder al menú de configuración de Luma3DS.
+
Ahora puedes mantener (Start) al inicio para iniciar el menú de selección de payloads de Luma3DS (ten en cuenta que este menú sólo es mostrado cuando se detecta más de un payload).
+
Ahora puedes mantener (Start) + (Select) + (X) al inicio para volcar el bootrom ARM11 (`boot11.bin`), el bootrom ARM9 (`boot9.bin`) y el OTP (`OTP.bin`) único de tu consola a la carpeta `/boot9strap/` en tu tarjeta SD (ten en cuenta que esto no mostrará ningún tipo de mensaje).
+
Ahora puedes presionar (L) + (Abajo) + (Select) al encender la consola para abrir el menú de Rosalina integrado en Luma3DS. Para una lista completa de las características de Rosalina, por favor revisa [la publicación de Luma3DS v8.0] (https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ Para usar [NTR CFW](https://github.com/44670/BootNTR/), instala [BootNTR Selecto
{% capture notice-7 %}
Elimina cualquier archivo y carpeta extra de la raíz de tu tarjeta SD que *no* esté en la siguiente imagen. Si la tienes, deja la carpeta `DCIM` ya que esta contiene las fotos que hayas tomado con la cámara de la 3DS:
-
+
{% endcapture %}
diff --git a/_pages/es_ES/flashing-ntrboot-(custom-firmware).txt b/_pages/es_ES/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..1ed5db8d0e
--- /dev/null
+++ b/_pages/es_ES/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Qué necesitas
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instrucciones
+
+##### Sección I - Preparativos
+
+1. Apaga **la 3DS de origen**
+1. Inserta la tarjeta SD de **la 3DS de origen** en tu computadora
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Espera hasta que se complete el proceso
+1. Presiona (B) para volver al menú principal
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Espera hasta que se complete el proceso
+1. Presiona (B) para volver al menú principal
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/es_ES/flashing-ntrboot-(powersaves).txt b/_pages/es_ES/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/es_ES/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/es_ES/get-started-(new-3ds).txt b/_pages/es_ES/get-started-(new-3ds).txt
index b9e02e4eba..a48b1d5409 100644
--- a/_pages/es_ES/get-started-(new-3ds).txt
+++ b/_pages/es_ES/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Comencemos (New 3DS)"
---
-Selecciona la casilla apropiada para tu versión en la tabla de más abajo.
-{: .notice--primary}
+Selecciona la casilla apropiada para tu versión en la tabla de más abajo. Ten en cuenta que las columnas "desde" y "hasta" son inclusivas. Esto quiere decir que por ejemplo la fila "desde 9.0.0 hasta 9.2.0" incluye la 9.0.0, 9.1.0 y 9.2.0.
-Ten en cuenta que las columnas "desde" y "hasta" son inclusivas. Esto quiere decir que por ejemplo la fila "desde 9.0.0 hasta 9.2.0" incluye la 9.0.0, 9.1.0 y 9.2.0.
-{: .notice--info}
-
-Ten en cuenta que el último número de la versión de tu sistema (que está precedida por un guión) se refiere a la versión de tu navegador. Actualmente, la versión del navegador es irrelevante para la New 3DS en esta guía.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Actualmente, la versión del navegador es irrelevante para la New 3DS en esta guía.
Para todas las versiones, también puedes [actualizar mediante cartucho](cart-update) a una versión superior de la misma columna para seguir esas instrucciones.
-{: .notice--info}
La versión de tu consola puede verse en la esquina inferior derecha de la pantalla superior en la Configuración de la consola.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ La versión de tu consola puede verse en la esquina inferior derecha de la panta
TODAS LAS VERSIONES
|
- Instalar boot9strap (ntrboothax)
(Requiere un flashcart compatible) or Instalar boot9strap (Hardmod)
(Requiere soldar) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/es_ES/get-started-(old-3ds).txt b/_pages/es_ES/get-started-(old-3ds).txt
index 0d942a34aa..4677378feb 100644
--- a/_pages/es_ES/get-started-(old-3ds).txt
+++ b/_pages/es_ES/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Comencemos (Old 3DS)"
---
-Selecciona la casilla apropiada para su versión en la tabla de más abajo.
-{: .notice--primary}
+Selecciona la casilla apropiada para su versión en la tabla de más abajo. Ten en cuenta que las columnas "desde" y "hasta" son inclusivas. Esto quiere decir que por ejemplo la fila "desde 9.0.0 hasta 9.2.0" incluye la 9.0.0, 9.1.0 y 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Si la versión es -0 entonces no tienes navegador, mientras que cualquier número por encima de -0 indica que tienes el navegador instalado.
-{% capture notice-1 %}
-Las dos últimas columnas de la tabla se refieren al último número de tu versión (que corresponde con la versión del navegador instalada en el sistema). Si la versión es -0 entonces no tienes navegador, mientras que cualquier número por encima de -0 indica que tienes el navegador instalado.
-
-Las columnas "desde" y "hasta" son inclusivas. Esto quiere decir que por ejemplo la fila "desde 9.0.0 hasta 9.2.0" incluye la 9.0.0, 9.1.0 y 9.2.0.
-
En el caso de "5.0.0-0U" por ejemplo, escogerías la columna de "Sin Navegador" y la fila de 5.0.0 hasta 5.1.0 porque tu sistema está en una versión comprendida entre ese rango y no tienes navegador instalado.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
Para todas las versiones, también puedes [actualizar mediante cartucho](cart-update) a una versión superior de la misma columna para seguir esas instrucciones.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los elementos claves de la versión, como la Configuración de la consola, el menú HOME, etc. Las actualizaciones por cartucho no afectarán a Nintendo 3DS Sound ni a funcionalidades en línea, como la Transferencia de Sistema, el Navegador de internet, la Plaza Mii o la eShop.
-
-¡Esto significa que actualizar mediante cartucho a una versión que contenga una versión más antigua de Nintendo 3DS Sound *(<7.0.0 para las Old 3DS en las regiones EUR, JPN, KOR, y USA)* a una que introdujo una versión más nueva de Nintendo 3DS Sound hará que [Soundhax](homebrew-launcher-(soundhax)) deje de funcionar! ¡Necesitarás un [método alternativo](homebrew-launcher-(alternatives)) para entrar al Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Si actualizaste con un cartucho que contiene la versión 9.9.0 o superior *(Por tanto tu versión es la 9.9.0 o mayor pero tu navegador está en la versión -25 o menor, como 10.2.0-24)*, tu navegador fue eliminado y tendrás que usar la columna "Sin Navegador".
-{: .notice--warning}
La versión de tu consola puede verse en la esquina inferior derecha de la pantalla superior en la Configuración de la consola.
-{: .notice--success}
{: .notice--info}
+Si actualizaste con un cartucho que contiene la versión 9.9.0 o superior *(Por tanto tu versión es la 9.9.0 o mayor pero tu navegador está en la versión -25 o menor, como 10.2.0-24)*, tu navegador fue eliminado y tendrás que usar la columna "Sin Navegador".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/es_ES/get-started.txt b/_pages/es_ES/get-started.txt
index 5a7ab29da0..f635391a22 100644
--- a/_pages/es_ES/get-started.txt
+++ b/_pages/es_ES/get-started.txt
@@ -2,23 +2,14 @@
title: "Comencemos"
---
-Esta página contiene instrucciones para instalar boot9strap en una 3DS o 2DS *sin modificar*. Si ya tienes instalado arm9loaderhax y quieres actualizar a boot9strap, sigue [A9LH a B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. En esta página podrás encontrar dónde comenzar con tu consola.
-Los colores de las consolas en la imagen pueden variar, pero fíjate bien en las posición de los botones y demás características, para asegurarte de que seleccionas el correcto.
-{: .notice}
-
-Haz clic en la imagen correspondiente a tu consola para ir a la página apropiada.
-{: .notice--primary}
-
-Los distintos modelos, versiones, y regiones requerirán distintos pasos a seguir para conseguir instalar el Custom Firmware boot9strap. En esta página podrás encontrar dónde comenzar con tu consola.
-{: .notice--info}
+Haz clic en la imagen correspondiente a tu consola para ir a la página apropiada. Los colores de las consolas en la imagen pueden variar, pero fíjate bien en las posición de los botones y demás características, para asegurarte de que seleccionas el correcto.
Si ya hackeaste tu 3DS anteriormente y tienes una instalación basada en EmuNAND, simplemente sigue todas las instrucciones estando en la SysNAND. Tu información será transferida desde la emuNAND a tu nueva instalación de B95 al final.
-{: .notice--info}
-Ten en cuenta que las capturas en esta guía pueden ser expandidas para mostrar más contenido haciendo clic en ellas.
-{: .notice--info}
+Esta página contiene instrucciones para instalar boot9strap en una 3DS o 2DS *sin modificar*. Si ya tienes instalado arm9loaderhax y quieres actualizar a boot9strap, sigue [A9LH a B9S](a9lh-to-b9s).
+{: .notice--primary}
¡Antes de empezar, se recomienda que los usuarios de Windows habiliten la opción para mostrar extensiones de archivo mediante [Extensiones de archivos (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Ten en cuenta que las capturas en esta guía pueden ser expandidas para mostrar
¡Antes de empezar, deberías comprobar si tu tarjeta SD tiene errores usando [H2testw (Windows)](h2testw-(windows)),[F3 (Linux)](f3-(linux)), o [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-¡Ten en cuenta que el nuevo método [ntrboothax](installing-boot9strap-(ntrboothax)) y un [hardmod](installing-boot9strap-(hardmod)) funciona para *todas las consolas, regiones y versiones*! ¡Esto incluye a consolas de región CHN y TWN que eran inmodificables antiguamente!
-{: .notice--success}
-
{% capture notice-1 %}
Ha habido muchos reportes de olas de baneos a usuarios de CFW por parte de Nintendo. Para protegerte, puedes realizar los siguientes pasos antes de seguir esta guía:
diff --git a/_pages/es_ES/godmode9-usage.txt b/_pages/es_ES/godmode9-usage.txt
index d788bd701b..107f205a31 100644
--- a/_pages/es_ES/godmode9-usage.txt
+++ b/_pages/es_ES/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "Usos de GodMode9"
---
GodMode9 es un explorador de archivos con acceso completo para la consola 3DS de Nintendo, dando acceso a la tarjeta SD, las particiones FAT dentro de tu SysNAND y EmuNAND, y básicamente a cualquier otra cosa. Entre otras funciones, te permite copiar, eliminar, renombrar archivos y crear carpetas.
-{: .notice--primary}
Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en la carpeta `/luma/payloads/` en tu tarjeta SD, al mantener (Start) al inicio se desplegará un "chainloader menu" donde tendrás que usar el D-Pad y pulsar (A) para seleccionar "GodMode9", para esas instrucciones.
-{: .notice--info}
{% capture notice %}
Esto es una herramienta potente que te entrega lo necesario para hacer básicamente cualquier modificación imaginable a todos los datos del sistema de la 3DS. Por ello, se toman precauciones para que no dañes accidentalmente los datos de tu consola.
-
+
El sistema de permisos de escritura te protege mostrando advertencias y te obliga a ingresar una secuencia de desbloqueo para obtener permisos de escritura. No es posible sobrescribir o modificar cosas importantes sin estas secuencias de desbloqueo y no es posible desbloquear algo accidentalmente. Como siempre, se inteligente, ten copias de seguridad para estar asegurado.
{% endcapture %}
diff --git a/_pages/es_ES/h2testw-(windows).txt b/_pages/es_ES/h2testw-(windows).txt
index 90fda0f881..70ac0d67ba 100644
--- a/_pages/es_ES/h2testw-(windows).txt
+++ b/_pages/es_ES/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
Esta es una sección adicional para revisar tu tarjeta SD en busca de errores usando h2testw.
-{: .notice--info}
Dependiendo del tamaño tu tarjeta SD y la velocidad de tu computadora, ¡este proceso podría tardar varias horas!
-{: .notice--info}
Esta página es sólo para usuarios de Windows. Si no estás en windows, revisa las páginas [F3 (linux)](f3-(linux)) o [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Qué necesitas
diff --git a/_pages/es_ES/home.txt b/_pages/es_ES/home.txt
index 3bfa7d46dd..b97f3945d4 100644
--- a/_pages/es_ES/home.txt
+++ b/_pages/es_ES/home.txt
@@ -37,7 +37,7 @@ En la mayoría de los casos, ejecutar homebrew en tu consola es 100% gratis usan
**Custom Firmware** ("CFW") te permite utilizar hacks más avanzados que el homebrew en el espacio del usuario no pueden utilizar fácilmente. Por ejemplo, los parches de firmas digitales te permiten instalar títulos no firmados que aparecen directamente en el Menú HOME.
-Un CFW puede configurarse fácilmente en cualquier consola en la versión 11.5.0 o inferior.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## ¿Qué se instalará con esta guía?
diff --git a/_pages/es_ES/homebrew-launcher-(alternatives).txt b/_pages/es_ES/homebrew-launcher-(alternatives).txt
index bec0ef16df..b0a14e631a 100644
--- a/_pages/es_ES/homebrew-launcher-(alternatives).txt
+++ b/_pages/es_ES/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternativas)"
---
El Homebrew Launcher tiene diferentes puntos de entrada, o métodos para ejecutarse.
-{: .notice--info}
Si browserhax no es una opción (revisa la tabla de abajo), no posees ninguno de estos juegos y no tienes otra 3DS con acceso al Homebrew Launcher, la opción más barata es comprar una copia "Nintendo Selects" de [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (asegúrate de conseguir el cartucho correcto para tu región) y un [Powersaves](https://amzn.to/2fb3VY7) (compatible con todas las regiones), luego usa oot3dhax de la lista de abajo.
-{: .notice--info}
Asegúrate de que la Comunicación inalámbrica de tu dispositivo está encendida, ya que udsploit (usado en la siguiente página) necesitará que el módulo inalámbrico esté activado para funcionar. Algunos dispositivos (New 3DS, New 2DS y Old 2DS) no pueden ajustar la Comunicación inalámbrica desde el Hombrew Launcher. La Comunicación inalámbrica sólo debe estar activada; no es necesario conectarse a una red.
-{: .notice--info}
#### Qué necesitas
diff --git a/_pages/es_ES/homebrew-launcher-(soundhax).txt b/_pages/es_ES/homebrew-launcher-(soundhax).txt
index e6813abb7c..d499cedad2 100644
--- a/_pages/es_ES/homebrew-launcher-(soundhax).txt
+++ b/_pages/es_ES/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
El Homebrew Launcher tiene diferentes puntos de entrada, o métodos para ejecutarse.
-{: .notice--info}
Soundhax es compatible con las versiones 9.0.0 hasta la 11.3.0 en las regiones EUR, JPN, KOR y USA.
-{: .notice--info}
Asegúrate de que la Comunicación inalámbrica de tu dispositivo está encendida, ya que udsploit (usado en la siguiente página) necesitará que el módulo inalámbrico esté activado para funcionar. Algunos dispositivos (New 3DS, New 2DS y Old 2DS) no pueden ajustar la Comunicación inalámbrica desde el Hombrew Launcher. La Comunicación inalámbrica sólo debe estar activada; no es necesario conectarse a una red.
-{: .notice--info}
{% capture notice-1 %}
Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los elementos claves de la versión, como la Configuración de la consola, el menú HOME, etc. Las actualizaciones por cartucho no afectarán a Nintendo 3DS Sound ni a funcionalidades en línea, como la Transferencia de Sistema, el Navegador de internet, la Plaza Mii o la eShop.
-
+
¡Esto significa que actualizar mediante cartucho a una versión que contenga una versión más antigua de Nintendo 3DS Sound *(<7.0.0 para las Old 3DS en las regiones EUR, JPN, KOR, y USA)* a una que introdujo una versión más nueva de Nintendo 3DS Sound hará que [Soundhax](homebrew-launcher-(soundhax)) deje de funcionar! ¡Necesitarás un [método alternativo](homebrew-launcher-(alternatives)) para entrar al Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/es_ES/installing-boot9strap-(browser).txt b/_pages/es_ES/installing-boot9strap-(browser).txt
index 7dce25eee6..894321c5dc 100644
--- a/_pages/es_ES/installing-boot9strap-(browser).txt
+++ b/_pages/es_ES/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Instalar boot9strap (navegador)"
---
Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía es sólo para la SysNAND, por lo que todas las instrucciones deben ser aplicadas en la SysNAND. Nota: los términos EmuNAND y RedNAND son diferentes implementaciones del [mismo concepto](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Qué necesitas
diff --git a/_pages/es_ES/installing-boot9strap-(dsiware).txt b/_pages/es_ES/installing-boot9strap-(dsiware).txt
index c7c8c45255..f74c59f4d0 100644
--- a/_pages/es_ES/installing-boot9strap-(dsiware).txt
+++ b/_pages/es_ES/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Instalar boot9strap (DSiWare)"
---
Hay dos métodos para instalar boot9strap usando DSiWare en 11.5.0.
-{: .notice--info}
Uno de estos métodos sólo funciona con cuatro juegos específicos que ya no son vendidos en la eShop, mientras el otro funciona con algunos juegos aún vendidos en la eShop.
-{: .notice--info}
Ámbos métodos requieren dos consolas. Una debe ya tener algún custom firmware (como boot9strap o arm9loaderhax) a la que le llamaremos la *3DS de origen*, mientras que la otra está en el firmware 11.5.0 original y le llamaremos *3DS de destino*.
-{: .notice--info}
-
-Ambos sistemas DEBEN ser de la misma región.
-{: .notice--warning}
Ámbos métodos asumen que la 3DS con custom firmware usan boot9strap o arm9loaderhax y han completado esta guía. Es posible completar estos métodos con otros custom firmware, pero eso está fuera del alcance de esta guía.
-{: .notice--info}
Ámbos métodos usan una combinación del exploit "FIRM partitions known-plaintext" explicado detalladamente [aquí](https://www.3dbrew.org/wiki/3DS_System_Flaws) (*en inglés*) con un error que permite que los juegos DSiWare puedan leer y escribir en cualquier parte de la NAND encriptada.
-{: .notice--info}
-{% capture notice-4 %}
Ámbos métodos requieren que hagas una [Transferencia de sistemas](https://www.nintendo.es/Atencion-al-cliente/Nintendo-3DS-y-Nintendo-2DS/Transferencia-entre-consolas-Nintendo-3DS-Incluida-Nintendo-3DS-XL-/Como-realizar-una-transferencia-de-sistema-entre-las-consolas-Nintendo-3DS-y-Nintendo-3DS-XL/Como-realizar-una-transferencia-de-sistema-entre-consolas-Nintendo-3DS-y-Nintendo-3DS-XL-592194.html) desde una 3DS con CFW instalado a una 3DS sin modificar como parte de los pasos a seguir. Las Transferencias de Sistema funcionarán *sólo* en los siguientes casos:
+ New 3DS o New 2DS -> New 3DS o New 2DS
+ Old 3DS u Old 2DS -> Old 3DS u Old 2DS
- + Old 3DS u Old 2DS -> New 3DS o New 2DS
-{% endcapture %}
+ + Old 3DS u Old 2DS -> New 3DS o New 2DS
-{{ notice-4 | markdownify }}
+Ambos sistemas DEBEN ser de la misma región.
+{: .notice--warning}
-¡En ámbos casos, el NNID de la 3DS de origen se mantendrá en la 3DS de destino a menos que realices una transferencia de vuelta o llames a Nintendo! (los detalles pueden encontrarse en las instrucciones)
-{: .notice--danger}
-
-Las transferencias del sistema solo pueden hacerse una vez por semana por NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Las transferencias del sistema solo pueden hacerse una vez por semana por NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Instalar boot9strap (Inyección de datos de guardado de DSiWare)](installing-boot9strap-(dsiware-save-injection))
-
+
Este método requiere que la 3DS de origen posea legítimamente uno de los siguientes juegos:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ Una copia pirata del juego *no* servirá, y todos estos juegos han sido eliminad
{% capture notice-1 %}
[Instalar boot9strap (Inyección de Juegos de DSiWare)](installing-boot9strap-(dsiware-game-injection))
-
+
Este método requiere que la 3DS de origen compre o ya tenga de forma legítima uno de los siguientes juegos listados en la página [Instalar boot9strap (Lista de juegos DSiWare inyectables)](installing-boot9strap-(dsiware-game-injection-list)).
-
+
Una copia pirata del juego *no* servirá.
{% endcapture %}
diff --git a/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt b/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt
index c9bd574f47..5f888d642d 100644
--- a/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Instalar boot9strap (Inyección de juego DSiWare)"
---
Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en la carpeta `/luma/payloads/` en tu tarjeta SD, al mantener (Start) al inicio se desplegará un "chainloader menu" donde tendrás que usar el D-Pad y pulsar (A) para seleccionar "GodMode9", para esas instrucciones.
-{: .notice--info}
Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Antes de proceder, asegúrate de leer todos los avisos y advertencias al [Instalar boot9strap (DSiWare)] (Instalar-boot9strap-(dsiware))
+
+¡Si no usas el `.firm` correspondiente a la 3DS de destino, la INUTILIZARÁS! ¡Asegúrate de descargar y usar el correcto!
{: .notice--danger}
#### Qué necesitas
-* Dos consolas 3DS
- + **La consola de origen**: la consola 3DS ejecutando algún tipo de custom firmware (como boot9strap o arm9loaderhax) *en la ultima versión*
- + **La consola de destino**: la consola 3DS sin modificar *en 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Comprar (o ya poseer) e instalar un juego DSiWare compatible, desde la eShop en **la 3DS de origen**
+ Una copia pirata del juego **NO** funcionará
+ Para una lista de juegos compatibles, revisa la página [Instalar boot9strap (Lista de juegos DSiWare inyectables)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/es_ES/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/es_ES/installing-boot9strap-(dsiware-game-injection-list).txt
index 8bc40fb922..1d57227d6f 100644
--- a/_pages/es_ES/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/es_ES/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Instalar boot9strap (Lista de juegos DSiWare inyectables)"
---
Esta es una lista generada automáticamente de todos los juegos compatibles con [Instalar boot9strap (DSiWare)](installing-boot9strap-(dsiware)).
-{: .notice--primary}
-La lista está ordenada por regiones en este orden: USA, EUR, JPN.
-{: .notice--info}
-
-Cada sección está ordenada en precio ascendente.
-{: .notice--info}
+La lista está ordenada por regiones en este orden: USA, EUR, JPN. Cada sección está ordenada en precio ascendente.
Los códigos QR pueden ser escaneados pulsando (L + R) en el menú de inicio y luego pulsando el icono QR en la pantalla inferior.
-{: .notice--info}
-Los tamaños requeridos existen porque el juego DSiWare y su hack no deben modificar sus respectivos tamaños para que la transferencia entre sistemas funcione correctamente, lo que significa que el juego DSiWare donante debe ser lo suficientemente grande para "encajar" en DSiWare hackeado.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt b/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt
index 28407d7714..9d02bfb30c 100644
--- a/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Instalar boot9strap (Inyección de guardado DSiWare)"
---
Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en la carpeta `/luma/payloads/` en tu tarjeta SD, al mantener (Start) al inicio se desplegará un "chainloader menu" donde tendrás que usar el D-Pad y pulsar (A) para seleccionar "GodMode9", para esas instrucciones.
-{: .notice--info}
Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Antes de proceder, asegúrate de leer todos los avisos y advertencias al [Instalar boot9strap (DSiWare)] (Instalar-boot9strap-(dsiware))
-{: .notice--danger}
¡Si no usas el `.firm` correspondiente a la 3DS de destino, la INUTILIZARÁS! ¡Asegúrate de descargar y usar el correcto!
{: .notice--danger}
#### Qué necesitas
-* Dos consolas 3DS
- + **La consola de origen**: la consola 3DS ejecutando algún tipo de custom firmware (como boot9strap o arm9loaderhax) *en la ultima versión*
- + **La consola de destino**: la consola 3DS sin modificar *en 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Ya poseer uno de los siguientes juegos DSiWare vulnerables (una copia pirata del juego **no** funcionará) en la **3DS de Origen**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/es_ES/installing-boot9strap-(hardmod).txt b/_pages/es_ES/installing-boot9strap-(hardmod).txt
index fab2bd7930..98bbd8d436 100644
--- a/_pages/es_ES/installing-boot9strap-(hardmod).txt
+++ b/_pages/es_ES/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Instalar boot9strap (hardmod)"
---
Puedes encontrar una excelente guía de como hacer hardmod [aquí](https://gbatemp.net/threads/414498/) (*en inglés*). Si estás en una New 3DS, lee [esto](https://github.com/Plailect/Guide/issues/681) y [esto](https://github.com/Plailect/Guide/issues/1185) antes de hacer hardmod.
-{: .notice--info}
Todo esto son implementaciones funcionales del exploit "Particiones FIRM de texto plano conocido" detallado [aquí](https://www.3dbrew.org/wiki/3DS_System_Flaws) (*en inglés*).
-{: .notice--info}
Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Esto funcionará en New 3DS, New 2DS, Old 3DS, y Old 2DS en *todas* las versiones para las cuales tengas su archivo `.firm` correspondiente.
-{: .notice--success}
#### Qué necesitas
diff --git a/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt b/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt
index e87fe13d11..3772fd406e 100644
--- a/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Instalar boot9strap (Homebrew Launcher)"
---
Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía es sólo para la SysNAND, por lo que todas las instrucciones deben ser aplicadas en la SysNAND. Nota: los términos EmuNAND y RedNAND son diferentes implementaciones del [mismo concepto](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instrucciones
@@ -20,6 +19,8 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía
+ Si *aún* arroja el error "PM INIT FAILED", prueba con la [versión r19 de safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar
1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Sección II - Instalar boot9strap
diff --git a/_pages/es_ES/installing-boot9strap-(mset).txt b/_pages/es_ES/installing-boot9strap-(mset).txt
index 0d48a4dab4..1484409be9 100644
--- a/_pages/es_ES/installing-boot9strap-(mset).txt
+++ b/_pages/es_ES/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Instalar boot9strap (MSET)"
---
Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía es sólo para la SysNAND, por lo que todas las instrucciones deben ser aplicadas en la SysNAND. Nota: los términos EmuNAND y RedNAND son diferentes implementaciones del [mismo concepto](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Qué necesitas
diff --git a/_pages/es_ES/installing-boot9strap-(ntrboot).txt b/_pages/es_ES/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..5e70be5879
--- /dev/null
+++ b/_pages/es_ES/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,84 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Qué necesitas
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* La última versión de [SafeB9SInstaller]
+(https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)*
+* La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
+* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instrucciones
+
+##### Sección I - Preparativos
+
+1. Apaga tu consola
+1. Inserta tu tarjeta SD en tu computadora
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copia _el contenido de_ `starter.zip` a la raíz de tu tarjeta SD
+1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD
+1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD
+
+ 
+ {: .notice--info}
+
+1. Vuelve a insertar tu tarjeta SD en tu consola
+1. Enciende tu consola
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Apaga tu consola
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
+
+##### Sección III - Instalar boot9strap
+
+1. Espera a que todos los controles de seguridad se completen
+1. Cuando se solicite, introduce la combinación de botones mostrada para instalar boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Sección IV - Configurar Luma3DS
+
+1. Inserta tu tarjeta SD en tu computadora
+1. Delete `boot.firm` from the root of your SD card
+1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD
+1. Vuelve a insertar tu tarjeta SD en tu consola
+1. Enciende tu consola
+1. Tu consola debería haber iniciado en el menú de configuración de Luma3DS
+ + Si obtienes una pantalla negra, [sigue esta guía de solución de problemas](troubleshooting#ts_sys_b9s)
+1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
+ + **"Show NAND or user string in System Settings"**
+1. Presiona (Start) para guardar y reiniciar
+ + Si te da error, tan solo continúa en la siguiente página
+
+___
+
+Continúa en [Finalizar instalación](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Espera hasta que se complete el proceso
+1. Presiona (B) para volver al menú principal
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/es_ES/move-emunand.txt b/_pages/es_ES/move-emunand.txt
index 21a15cf1c4..e8971b2439 100644
--- a/_pages/es_ES/move-emunand.txt
+++ b/_pages/es_ES/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Mover EmuNAND"
---
Esta es una sección adicional para mover los contenidos de una EmuNAND a la nueva SysNAND con CFW, eliminando después la partición de la EmuNAND de la tarjeta SD. Nota: los términos EmuNAND y RedNAND son diferentes implementaciones del [mismo concepto](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en la carpeta `/luma/payloads/` en tu tarjeta SD, al mantener (Start) al inicio se desplegará un "chainloader menu" donde tendrás que usar el D-Pad y pulsar (A) para seleccionar "GodMode9", para esas instrucciones.
-{: .notice--info}
+Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en la carpeta `/luma/payloads/` en tu tarjeta SD, al mantener (Start) al inicio se desplegará un "chainloader menu" donde tendrás que usar el D-Pad y pulsar (A) para seleccionar "GodMode9", para esas instrucciones.
**Ya DEBES tener instalado Luma3DS y boot9strap o arm9loaderhax para usar esto.**
{: .notice--danger}
diff --git a/_pages/es_ES/ntr-and-cubic-ninja.txt b/_pages/es_ES/ntr-and-cubic-ninja.txt
index 4c7ba6a82b..cdedc3408b 100644
--- a/_pages/es_ES/ntr-and-cubic-ninja.txt
+++ b/_pages/es_ES/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR y Cubic Ninja"
---
Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**¡NTR Cubic Ninja sólo funciona para las New 3DS JPN!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Qué necesitas
diff --git a/_pages/es_ES/ntrboot.txt b/_pages/es_ES/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/es_ES/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/es_ES/region-changing.txt b/_pages/es_ES/region-changing.txt
index b0279f39d0..e8f25360ca 100644
--- a/_pages/es_ES/region-changing.txt
+++ b/_pages/es_ES/region-changing.txt
@@ -3,16 +3,12 @@ title: "Cambio de Región"
---
Esta es una sección adicional para cambiar de región la SysNAND de tu CFW. Esto se hace instalando la imagen de CTRTransfer 9.2.0 para la región a la que quieras cambiar.
-{: .notice--primary}
-**Cambiar de región es casi totalmente innecesario ya que Luma3DS soporta juegos de distinta región y [emulación individual de la región del juego](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en la carpeta `/luma/payloads/` en tu tarjeta SD, al mantener (Start) al inicio se desplegará un "chainloader menu" donde tendrás que usar el D-Pad y pulsar (A) para seleccionar "GodMode9", para esas instrucciones.
-{: .notice--info}
Este proceso desvinculará tu NNID del sistema, puesto que ya no será compatible con él. Las NNIDs están restringidas a la región de la consola que la creó y no puede ser transferida entre regiones sin [un proceso muy complejo y avanzado](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt) (*En Inglés*).
{: .notice--warning}
@@ -20,19 +16,14 @@ Este proceso desvinculará tu NNID del sistema, puesto que ya no será compatibl
Después de este proceso, sólo las **New 3DS que nunca antes hayan tenido acceso a la eShop** y **cualquier Old 3DS** serán capaces de acceder a la eShop después de crear una nueva NNID en su nueva región. ¡Las New 3DS que cambien de región y que hayan accedido a la eShop en su región original, no pueden crear una nueva NNID y acceder a la eShop en su nueva región!
{: .notice--warning}
-Ten en cuenta que en ocasiones la eShop inexplicablemente no funcionará para las consolas en las que debería funcionar. Esto es causado por los servidores de Nintendo y realmente no tenemos ningún control sobre ello.
-{: .notice--warning}
-
-Similar a la advertencia de arriba, ten en cuenta que ocasionalmente la eShop de forma inexplicable funcionará en algunas consolas en las que no debería (como algunas New 3DS). La causa para esto es actualmente desconocida.
-{: .notice--warning}
+Ten en cuenta que en ocasiones la eShop inexplicablemente no funcionará para las consolas en las que debería funcionar. Esto es causado por los servidores de Nintendo y realmente no tenemos ningún control sobre ello. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). La causa para esto es actualmente desconocida.
Cambiar de región usando CTRTransfer (lo cual este método realiza) parece ser la causa de que algunos parches de reinicio dejen de funcionar. La causa de esto es desconocida, pero por ahora los usuarios de Old 3DS no podrán jugar juegos con modo de memoria extendida (como Monster Hunter, Super Smash Bros y Pokémon Sol/Luna) hasta que formateen sus consolas.
-{: .notice--warning}
-Nunca formatees una New 2DS que esté en la versión <11.4.0 ¡o no podrás completar la configuración inicial!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**Ya DEBES tener instalado Luma3DS y boot9strap o arm9loaderhax para usar esto.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Qué necesitas
diff --git a/_pages/es_ES/site-navigation.txt b/_pages/es_ES/site-navigation.txt
index fc8b995504..8670984184 100644
--- a/_pages/es_ES/site-navigation.txt
+++ b/_pages/es_ES/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [Extensiones de archivos (Windows)](file-extensions-(windows))
+ [Finalizar Instalación](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Comencemos (New 3DS)](get-started-(new-3ds))
+ [Comencemos (Old 3DS)](get-started-(old-3ds))
+ [Comencemos](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Instalar boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Instalar boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Instalar boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Instalar boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Mover EmuNAND](move-emunand)
+ [NTR y Cubic Ninja](ntr-and-cubic-ninja)
+ [Cambio de Región](region-changing)
diff --git a/_pages/es_ES/troubleshooting.txt b/_pages/es_ES/troubleshooting.txt
index 68948d8f5f..2d85fccfbe 100644
--- a/_pages/es_ES/troubleshooting.txt
+++ b/_pages/es_ES/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Resolución de Problemas"
Si no puedes encender tu consola, por favor, busca la sección correspondiente a tu problema y sigue las instrucciones. Una vez encuentres la solución que funcione para ti, puedes continuar con la guía principal
(Esta sección es muy larga. Prueba a usar Ctrl+F para buscar tu problema).
-{: .notice--primary}
-**Si aún no eres capaz de resolver el problema y necesitas ayuda, por favor, pega el contenido de todos los archivos .log que haya en la raíz de tu tarjeta SD en un [Gist](https://gist.github.com/) y vuelve con una descripción detallada de tu problema y de lo que has intentado.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## La funcionalidad de DSi/DS se ha roto tras completar la guía
diff --git a/_pages/es_ES/uninstall-cfw.txt b/_pages/es_ES/uninstall-cfw.txt
index 8d752b992d..e3c566dcb9 100644
--- a/_pages/es_ES/uninstall-cfw.txt
+++ b/_pages/es_ES/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Desinstalar CFW"
---
Esto removerá completamente el CFW de tu consola, incluyendo Boot9Strap y Luma3DS, regresando la consola a su estado original.
-{: .notice--danger}
Cualquier juego sin firmar (ilegítimo) se volverá inutilizable y puede ser manualmente removido usando la sección de "Gestión de Datos" en la Configuración de la consola. Utiliza un [gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/latest) para respaldar los datos de guardado de cualquier juego sin firmar (ilegítimo) que te sea de importancia conservar.
-{: .notice--info}
Esto no afectará a tu NNID, ningún juego comprado legalmente o a los datos de guardado pertenecientes a dichos juegos.
-{: .notice--info}
Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en la carpeta `/luma/payloads/` en tu tarjeta SD, al mantener (Start) al inicio se desplegará un "chainloader menu" donde tendrás que usar el D-Pad y pulsar (A) para seleccionar "GodMode9", para esas instrucciones.
-{: .notice--info}
#### Qué necesitas
diff --git a/_pages/es_ES/updating-b9s.txt b/_pages/es_ES/updating-b9s.txt
index 60c4b0cf14..b2d5a71d3f 100644
--- a/_pages/es_ES/updating-b9s.txt
+++ b/_pages/es_ES/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Actualizar B9S" #
---
Esta página es para ayudar a los usuarios actuales de boot9strap a actualizar su instalación a la última versión.
-{: .notice--info}
Ten en cuenta que la última gran actualización de Luma3DS *no* es compatible con la versión 1.0 de boot9strap. *Debes* actualizar tu instalación de boot9strap a la versión 1.2 siguiendo las instrucciones de esta página.
-{: .notice--warning}
{% capture notice-1 %}
Ha habido muchos reportes de olas de baneos a usuarios de CFW por parte de Nintendo. Para protegerte, puedes realizar los siguientes pasos antes de seguir esta guía:
diff --git a/_pages/fi_FI/9.2.0-ctrtransfer.txt b/_pages/fi_FI/9.2.0-ctrtransfer.txt
index f8c97e8ffb..1f88ecff1e 100644
--- a/_pages/fi_FI/9.2.0-ctrtransfer.txt
+++ b/_pages/fi_FI/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0-CTRTransfer"
---
Tämä lisäosio opastaa sinua asentamaan 9.2.0-CTRTransfer-näköistiedoston konsolillesi.
-{: .notice--primary}
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
-{: .notice--success}
Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD-korttisi `/luma/payloads`-kansiossa, (START)-painikkeen pohjassa pitäminen käynnistyksen aikana avaa "ketjulatausvalikon", jossa sinun on käytettävä ristiohjainta ja (A):ta avataksesi GodMode9:n näitä ohjeita varten.
-{: .notice--info}
Älä koskaan alusta New 2DS:ää, jonka versio on 11.4.0 tai vanhempi, tai et pysty määrittämään alkuasetuksia loppuun asti!
{: .notice--danger}
diff --git a/_pages/fi_FI/a9lh-to-b9s.txt b/_pages/fi_FI/a9lh-to-b9s.txt
index 72d088c2b5..61985c90e5 100644
--- a/_pages/fi_FI/a9lh-to-b9s.txt
+++ b/_pages/fi_FI/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH → B9S"
---
Tämä sivu on tarkoitettu arm9loaderhax-käyttäjille, jotka haluavat päivittää konsolinsa boot9strapiin.
-{: .notice--info}
Kaikki Luma3DS:n julkaisut tulevat jatkossa olemaan vain `.firm`-muodossa, joka on yhteensopiva ainoastaan boot9strapin ja sighaxin kanssa. Tämä tarkoittaa sitä, että jos haluat jatkossa saada päivityksiä Luma3DS:ään, tulee sinun käyttää tätä sivua päivittääksesi asennuksesi.
-{: .notice--info}
+
+**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
Jos sinulla on PIN käytössä Luma3DS:ssä, SafeB9SInstaller antaa sinulle "OTP Crypto Fail" -virheen, ellet ota sitä pois käytöstä väliaikaisesti (voit ottaa sen takaisin käyttöön päivityksen jälkeen).
{: .notice--warning}
-**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
-{: .notice--success}
-
{% capture notice-1 %}
On käynyt ilmi, että Nintendo jakaa CFW-käyttäjille porttikieltoja verkkotoimintoihinsa. Välttyäksesi tältä tee seuraavat toimet ennen aloittamista:
diff --git a/_pages/fi_FI/cart-update.txt b/_pages/fi_FI/cart-update.txt
index 011db12f11..f38ebc6472 100644
--- a/_pages/fi_FI/cart-update.txt
+++ b/_pages/fi_FI/cart-update.txt
@@ -3,20 +3,18 @@ title: "Korttipäivitys"
---
Kaikki pelikortit sisältävät peliä varten vaaditun järjestelmäversion. Tämä mahdollistaa kenen tahansa päivittää vanhemman versionsa kortilla olevaan versioon (jopa ilman internet-yhteyttä).
-{: .notice--info}
{% capture notice-1 %}
Huomaa, että korttipäivitykset tuovat päivityksiä vain ydinominaisuuksiin, kuten järjestelmäasetuksiin, HOME-valikkoon jne. Korttipäivitykset eivät tuo päivityksiä Nintendo 3DS Soundiin eivätkä verkko-ominaisuuksiin, kuten tiedonsiirtosovellukseen, selaimeen, StreetPass Mii Plazaan tai eShopiin.
-
+
Tämä tarkoittaa sitä, että korttipäivityksen tekeminen versiolta, jolla on vanha Nintendo 3DS Sound -sovellus *(versiota 7.0.0 vanhemmat versiot EUR-, JPN-, KOR- tai USA-alueen vanhalla 3DS:llä)*, rikkoo [SoundHax](homebrew-launcher-(soundhax))in toiminnallisuuden! Tarvitset [vaihtoehtoisen tavan](homebrew-launcher-(alternatives)) Homebrew Launcherin käynnistämiseen!
+
+Korttipäivitys EI myöskään asenna selainta, jos sinulla ei jo ole sellaista. **Vain** järjestelmän versio päivittyy *(esimerkiksi: 2.1.0-0 → 6.0.0-0)*. Viimeinen luku *(-0)* **ei** muutu.
{% endcapture %}
{{ notice-1 | markdownify }}
-Korttipäivitys EI myöskään asenna selainta, jos sinulla ei jo ole sellaista. **Vain** järjestelmän versio päivittyy *(esimerkiksi: 2.1.0-0 → 6.0.0-0)*. Viimeinen luku *(-0)* **ei** muutu.
-{: .notice--warning}
-
**Konsolin päivittäminen pelikortilla, jonka sisältämä versio on 9.9.0 tai uudempi, poistaa selaimesi, kunnes päivität konsolin normaalisti internetin kautta!**
{: .notice--danger}
diff --git a/_pages/fi_FI/credits.txt b/_pages/fi_FI/credits.txt
index cd56b90784..ddec526964 100644
--- a/_pages/fi_FI/credits.txt
+++ b/_pages/fi_FI/credits.txt
@@ -9,7 +9,6 @@ title: "Kiitokset"
{: .notice--primary}
Otathan yhteyttä minuun, jos unohdin sinut tästä, niin lisään nimesi.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/fi_FI/f3-(linux).txt b/_pages/fi_FI/f3-(linux).txt
index 8f688c90c0..620037703b 100644
--- a/_pages/fi_FI/f3-(linux).txt
+++ b/_pages/fi_FI/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
Tämä lisäosio opastaa sinua tarkistamaan SD-korttisi virheiden varalta F3-ohjelman avulla.
-{: .notice--info}
SD-korttisi koosta ja tietokoneesi nopeudesta riippuen tämä prosessi voi kestää jopa useita tunteja!
-{: .notice--info}
Tämä sivu on vain Linux-käyttäjille. Jos et käytä Linuxia, tutustu sivuun [H2testw (Windows)](h2testw-(windows)) tai [F3X (Mac)](f3x-(mac)).
-{: .notice--info}
#### Tarpeet
diff --git a/_pages/fi_FI/f3x-(mac).txt b/_pages/fi_FI/f3x-(mac).txt
index 1bb391b4bc..3506dfb2fe 100644
--- a/_pages/fi_FI/f3x-(mac).txt
+++ b/_pages/fi_FI/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
Tämä lisäosio opastaa sinua tarkistamaan SD-korttisi virheiden varalta F3X-ohjelman avulla.
-{: .notice--info}
SD-korttisi koosta ja tietokoneesi nopeudesta riippuen tämä prosessi voi kestää jopa useita tunteja!
-{: .notice--info}
Tämä sivu on vain Mac-käyttäjille. Jos et käytä Maciä, tutustu sivuun [H2testw (Windows)](h2testw-(windows)) tai [F3 (Linux)](f3-(Linux)) pages.
-{: .notice--info}
#### Tarpeet
diff --git a/_pages/fi_FI/faq.txt b/_pages/fi_FI/faq.txt
index 1d190de147..3b703f75ae 100644
--- a/_pages/fi_FI/faq.txt
+++ b/_pages/fi_FI/faq.txt
@@ -6,52 +6,52 @@ title: "UKK"
**Q:** *Minulla on viimeisin järjestelmäversio, onko konsolini hakkeroitavissa?*
**A:** On.
-
+
**Q:** *Kuinka päivitän Luma3DS:n?*
**A:** Käytä Luma3DS Updateria
-
+
**Q:** *Kuulin eräästä jutusta, josta minun pitäisi maksaa (Gateway, Sky3DS jne.), tarvitsenko sitä?*
**A:** Et. Boot9strap on erinomainen menetelmä ladata hax, joka suoritetaan varhaisessa vaiheessa käynnistystä.
-
+
**Q:** *Kuinka siirrän tallennukset Gateway-kokoonpanosta konsolille asennettuihin peleihin?*
**A:** Tutustu [tähän](https://gbatemp.net/threads/425743/)
-
+
**Q:** *Mitä tarvitsen tämän oppaan läpikäymiseen?*
**A:** Tämän oppaan voi käydä kokonaan läpi käyttäen ilmaisia ohjelmia
-
+
**Q:** *Kuinka riskialtista konsolini hakkerointi on?*
**A:** Konsolin rikkoutuminen on *periaatteessa* mahdotonta, ellet ohita/kierrä turvatarkistuksia.
-
+
**Q:** *Voinko tämän jälkeen käyttää kotitekoisia ohjelmia ja emulaattoreita? *
**A:** Kyllä! Mukautettu laiteohjelmisto ei pelkästään salli Homebrew Launcheria, vaan myös pitää hackit kaikilla järjestelmäversioilla pysyvästi, jopa päivitysten jälkeen.
-
+
**Q:** *Voinko käyttää tätä pelatakseni muiden alueiden pelejä?*
**A:** Luma3DS tukee aluepaikkauksia, jotka mahdollistavat käyttäjien asentaa pelejä miltä tahansa alueelta ilman ylimääräisiä toimenpiteitä.
-
+
**Q:** *Onko CFW turvallista päivittää, kun käytössä on SysNAND?*
**A:** On. Se on turvallista, älkää kyselkö enää.
-
+
**Q:** *Mistä minun kannattaisi etsiä apua konsolini hakkerointiin?*
**A:** Kysy apua (englanniksi) [Nintendo Homebrew -palvelimelta Discordissa](https://discord.gg/MWxPgEp).
-
+
**Q:** *Voinko tehdä tämän 4 Gt:n (tai pienemmällä) SD-kortilla?*
**A:** Kyllä!
-
+
**Q:** *Voinko käyttää 128 Gt:n (tai suurempaa) SD-korttia?*
**A:** Voit, mutta jotkut käyttäjät ovat huomauttaneet hidastumisista suurikokoisilla korteilla. Huomaa, ettet voi käyttää exFAT-alustettua korttia; alustuksen täytyy olla FAT32-muotoinen.
-
+
**Q:** *Kuinka voin siirtyä käyttämään uutta SD-korttia tämän jälkeen?*
**A:** Kopioi vain kaikki tiedostot uudelle SD-kortille.
-
+
**Q:** *Säilyykö minun NNID:ni?*
**A:** Jos aloitat kirjautuneena NNID:llesi ja seuraat ohjeita tarkoin, NNID:si säilyy.
-
+
**Q:** *Entäpä siirtosovellus (System Transfer)?*
**A:** Kun olet käynyt oppaan läpi ja asentanut B9S:n, voit suorittaa tiedonsiirron 3DS- tai 2DS-konsoliltasi/-konsolillesi täysin normaalisti, samaan tapaan kuin hakkeroimattomalla konsolillakin (menetät siirrossa kaikki laittomasti hankitut pelit/teemat/DLC:t, mutta tallennukset jäävät jopa menetetyille peleille).
-
+
**Q:** *Voinko tehdä tämän ilman tietokonetta (esim. Android-puhelimella)?*
**A:** Tarvitset vain jonkin tavan laittaa tiedostoja SD-kortille!
-
+
**Q:** *Apua! Jokin meni vikaan, eikä konsolini enää käynnisty...*
**A:** Tutustu [vianmääritysohjeisiin](troubleshooting).
diff --git a/_pages/fi_FI/file-extensions-(windows).txt b/_pages/fi_FI/file-extensions-(windows).txt
index e88bfb7f3a..fd29c6cb5d 100644
--- a/_pages/fi_FI/file-extensions-(windows).txt
+++ b/_pages/fi_FI/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "Tiedostotunnisteet (Windows)"
---
Tämä lisäosio opastaa sinua ottamaan pois käytöstä Windowsissa oletuksena olevan tieostotunnisteiden piilottamisen.
-{: .notice--info}
Tämä auttaa sinua löytämään helpommin tiedostot, joihin tässä oppaassa viitataan.
-{: .notice--info}
#### Ohjeet
diff --git a/_pages/fi_FI/finalizing-setup.txt b/_pages/fi_FI/finalizing-setup.txt
index 694c5c4784..241f679599 100644
--- a/_pages/fi_FI/finalizing-setup.txt
+++ b/_pages/fi_FI/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Asennuksen viimeistely"
#### Katsaus vaiheisiin
-{% capture notice-2 %}
Latauduttuaan NANDilta boot9strap käynnistää `boot.firm`-tiedoston, joka voi olla mikä tahansa kelvollinen arm9-ohjelma FIRM-muodossa. Tämän tiedoston voi korvata milloin tahansa, joskin Luma3DS sallii muidenkin FIRM-muotoisten arm9-ohjelmien käynnistämisen ketjulataajan avulla.
-
+
Tässä tapauksessa käytetään [AuroraWright](https://github.com/AuroraWright/)in luomaa Luma3DS:ää paikatun SysNANDin käynnistämiseen suoraan, jolloin minkäänlaista EmuNANDia ei tarvita, mikä yksinkertaistaa hakkeroidun 3DS:n käyttöä sekä säästää tilaa SD-kortilta.
-
+
Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
+ **FBI** *(asentaa CIA-muotoisia pelejä ja sovelluksia)*
@@ -18,10 +17,6 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
+ **GodMode9** *(monikäyttöinen työkalu, jolla voi tehdä NANDiin ja pelikorttiin liittyviä toimintoja)*
+ **Homebrew Launcher Loader** *(käynnistää Homebrew Launcherin tavallisena sovelluksena, kiitos Rosalina-taian)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Tarpeet
* Themelyn [viimeisin julkaisu](https://github.com/ihaveamac/Themely/releases/latest) *(`.cia`-tiedosto)*
@@ -134,8 +129,10 @@ Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluais
___
{% capture notice-10 %}
-Voit nyt käyttää Luma3DS Updateria päivittääksesi Luma3DS:n viimeisimpään versioon. Avaa vain sovellus ja paina (A):ta.
+Voit nyt käyttää Luma3DS Updateria päivittääksesi Luma3DS:n viimeisimpään versioon. Avaa vain sovellus ja paina (A):ta.
+
Tämä ei ole sama asia kuin järjestelmäpäivitys; toiminto vain lataa ja purkaa uusimmat Luma3DS-tiedostot.
+
Tämä päivittää vain SD-kortilla olevat Luma3DS-tiedostot. Jos käynnistät konsolisi ilman SD-korttia, käytetään CTRNANDiin asettamaasi versiota.
{% endcapture %}
@@ -143,9 +140,13 @@ Tämä päivittää vain SD-kortilla olevat Luma3DS-tiedostot. Jos käynnistät
{% capture notice-6 %}
Konsolisi käynistää nyt oletuksena Luma3DS-CFW-SysNANDin.
+
Voit nyt pitää (SELECT)-painiketta pohjassa käynnistyksen aikana avataksesi Luma3DS:n määritysvalikon.
+
Voit nyt pitää (START)-painiketta pohjassa käynnistyksen aikana avataksesi Luma3DS:n ketjulataajan (huomaa, että ketjulatausvalikko näytetään vain, jos useampi kuin yksi ohjelma havaitaan).
+
Voit nyt pitää pohjassa (START) + (SELECT) + (X) -painikeyhdistelmää konsolin käynnistyessä kopioidaksesi ARM11-bootromin (`boot11.bin`), ARM9-bootromin (`boot9.bin`) sekä konsolikohtaisen OTP-tiedostosi (`OTP.bin`) SD-korttisi `/boot9strap/`-kansioon (huomaa, että prosessissa ei näytetä minkäänlaisia viestejä tai kehotteita).
+
Voit nyt käyttää (L) + (ALAS) + (SELECT) -painikeyhdistelmää, kun konsolisi on päällä avataksesi Luma3DS:ään integroidun Rosalina-valikon. Täyden luettelon Rosalinan ominaisuuksista löydät [Luma3DS v8.0 -julkaisusivulta](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ Käyttääksesi [NTR-CFW](https://github.com/44670/BootNTR/):tä asenna [BootNTR
{% capture notice-7 %}
Poista SD-korttisi juuresta kaikki tiedostot ja kansiot, jotka *eivät* ole seuraavassa kuvassa. Jos kortilla on `DCIM`-kansio, jätä se sinne, sillä se sisältää kaikki 3DS:n kameralla otetut kuvat:
-
+
{% endcapture %}
diff --git a/_pages/fi_FI/flashing-ntrboot-(custom-firmware).txt b/_pages/fi_FI/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..631f32228c
--- /dev/null
+++ b/_pages/fi_FI/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Ntrbootin asentaminen (mukautettu laiteohjelmisto)"
+---
+
+Varmista ennen jatkamista, että olet lukenut kaikki [ntrbootia koskevat huomautukset](ntrboot).
+
+Huomaa, että flash-korttia ei voi käyttää sen normaaleihin käyttötarkoituksiin silloin, kun ntrboot on asennettuna sille. Osion lopussa on valinnaiset ohjeet, joiden avulla voit poistaa ntrbootin flash-kortiltasi asennettuasi boot9strapin.
+{: .notice--warning}
+
+Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **vioittaa** jäljitelmä-flash-korttia ja tehdä siitä pysyvästi käyttökelvottoman. Vaikka tämä onkin epätodennäköistä, on suositeltavaa käyttää vain alkuperäisiä kortteja. Jotta välttyisit jäljitelmäkortin saamiselta, on suositeltavaa käyttää flash-kortin ostamiseen hyvämaineista sivustoa (kuten [NDS Card](http://www.nds-card.com/)ia).
+{: .notice--danger}
+
+#### Tarpeet
+
+* Ntrboot-yhteensopiva DS-/DSi-flash-korttisi:
+ + Joko Acekard 2i tai R4i Gold 3DS RTS
+* Kaksi 3DS-perheen konsolia
+ + **Lähde-3DS**: 3DS-perheen konsoli, jolla on jo asennettuna jokin mukautettu laiteohjelmisto (kuten boot9strap tai arm9loaderhax)
+ + **Kohde-3DS**: konsoli, jolla on vakiolaiteohjelmisto
+* Boot9strapin [viimeisin julkaisu](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr`-boot9strap; ei `devkit`-tiedosto)*
+* Ntrboot_flasherin [viimeisin julkaisu](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Ohjeet
+
+##### Vaihe I – Valmistelut
+
+1. Sammuta **lähde-3DS**
+1. Aseta **lähde-3DS**:n SD-kortti tietokoneeseesi
+1. Luo `ntrboot`-niminen kansio SD-korttisi juureen
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Kopioi ntrboot_flasher-`.zip`-pakkauksesta `ntrboot_flasher.firm` **lähde-3DS**:n SD-kortin `/luma/payloads`-kansioon
+1. Aseta **lähde-3DS**:n SD-kortti takaisin konsoliinsa
+1. Aseta ntrboot-yhteensopiva DS-/DSi-flash-korttisi **lähde-3DS**:ään
+
+##### Vaihe II – Ntrbootin asentaminen
+
+1. Avaa **lähde-3DS**:llä Luma3DS:n ketjulataaja pitämällä (START)-painiketta pohjassa konsolin käynnistyessä
+1. Valitse "ntrboot_flasher"
+1. Valitse "Dump Flash"
+1. Odota, kunnes toiminto on suoritettu
+1. Paina (B):tä palataksesi päävalikkoon
+1. Valitse "Inject Ntrboot"
+1. Paina (Y):tä jatkaaksesi
+1. Press (R) for retail unit ntrboot
+1. Odota, kunnes toiminto on suoritettu
+1. Paina (B):tä palataksesi päävalikkoon
+1. Valitse "EXIT" sammuttaaksesi **lähde-3DS**:n
+
+___
+
+Jatka osioon [Boot9strapin asentaminen (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/fi_FI/flashing-ntrboot-(powersaves).txt b/_pages/fi_FI/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e08486342f
--- /dev/null
+++ b/_pages/fi_FI/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Ntrbootin asentaminen (Powersaves)"
+---
+
+Tämä on väliaikaissivu, johon on tulossa ohjeet ntrboothaxin asentamiseen Powersavesin avulla.
\ No newline at end of file
diff --git a/_pages/fi_FI/get-started-(new-3ds).txt b/_pages/fi_FI/get-started-(new-3ds).txt
index cf815bfe33..b0eea3d980 100644
--- a/_pages/fi_FI/get-started-(new-3ds).txt
+++ b/_pages/fi_FI/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Aloitus (New 3DS)"
---
-Valitse konsolisi versiota vastaava sivu alta löytyvästä listasta.
-{: .notice--primary}
+Valitse konsolisi versiota vastaava sivu alta löytyvästä listasta. Huomaa, että versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. Tämä tarkoittaa esimerkiksi sitä, että rivi "versiosta 9.0.0 versioon 9.2.0" kattaa versiot 9.0.0, 9.1.0 ja 9.2.0.
-Huomaa, että versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. Tämä tarkoittaa esimerkiksi sitä, että rivi "versiosta 9.0.0 versioon 9.2.0" kattaa versiot 9.0.0, 9.1.0 ja 9.2.0.
-{: .notice--info}
-
-Huomaa, että järjestelmäsi versionumeron viimeinen luku (jota edeltää yhdysmerkki) viittaa selaimesi versioon. Tällä hetkellä selaimen versiolla ei ole merkitystä New 3DS:n kannalta tässä oppaassa.
-{: .notice--info}
+Huomaa myös, että järjestelmäsi versionumeron viimeinen luku (jota edeltää yhdysmerkki) viittaa selaimesi versioon. Tällä hetkellä selaimen versiolla ei ole merkitystä New 3DS:n kannalta tässä oppaassa.
Kaikilla versioilla voit myös [korttipäivittää](cart-update) järjestelmäsi uudempaan versioon ja jatkaa ohjeiden seuraamista saman sarakkeen kohdalta.
-{: .notice--info}
Konsolisi versio löytyy yläruudun oikeasta alakulmasta järjestelmäasetuksissa (System Settings).
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Konsolisi versio löytyy yläruudun oikeasta alakulmasta järjestelmäasetuksiss
Kaikki versiot
|
- Boot9strapin asentaminen (ntrboothax)
(vaatii yhteensopivan flash-kortin) tai Boot9strapin asentaminen (laitteistomodaus)
(vaatii juottamista) |
+ ntrboot
(vaatii yhteensopivan flash-kortin) tai Boot9strapin asentaminen (laitteistomodaus)
(vaatii juottamista) |
\ No newline at end of file
diff --git a/_pages/fi_FI/get-started-(old-3ds).txt b/_pages/fi_FI/get-started-(old-3ds).txt
index 942c3216b5..94f4b42482 100644
--- a/_pages/fi_FI/get-started-(old-3ds).txt
+++ b/_pages/fi_FI/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Aloitus (vanha 3DS)"
---
-Valitse konsolisi versiota vastaava sivu alta löytyvästä listasta.
-{: .notice--primary}
+Valitse konsolisi versiota vastaava sivu alta löytyvästä listasta. Huomaa, että versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. Tämä tarkoittaa esimerkiksi sitä, että rivi "versiosta 9.0.0 versioon 9.2.0" kattaa versiot 9.0.0, 9.1.0 ja 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Jos versionumero on -0, järjestelmässäsi ei ole selainta. Mikä tahansa suurempi luku kuin -0 taas kertoo, että selain on asennettuna.
-{% capture notice-1 %}
-Listan kaksi viimeistä saraketta viittaavat konsolisi versionumeron viimeiseen lukuun (joka vastaa järjestelmään asennetun selaimen versiota). Jos versionumero on -0, järjestelmässäsi ei ole selainta. Mikä tahansa suurempi luku kuin -0 taas kertoo, että selain on asennettuna.
-
-Versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. Tämä tarkoittaa esimerkiksi sitä, että rivi "versiosta 9.0.0 versioon 9.2.0" kattaa versiot 9.0.0, 9.1.0 ja 9.2.0.
-
Esimerkkinä: jos versionumerosi on "5.0.0-0U", sinun tulee seurata "Ei selainta" -saraketta sekä "versiosta 5.0.0 versioon 5.1.0" -riviä, koska järjestelmäsi versio on kyseisellä välillä, eikä siinä ole selainta asennettuna.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
Kaikilla versioilla voit myös [korttipäivittää](cart-update) järjestelmäsi uudempaan versioon ja jatkaa ohjeiden seuraamista saman sarakkeen kohdalta.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Huomaa, että korttipäivitykset tuovat päivityksiä vain ydinominaisuuksiin, kuten järjestelmäasetuksiin, HOME-valikkoon jne. Korttipäivitykset eivät tuo päivityksiä Nintendo 3DS Soundiin eivätkä verkko-ominaisuuksiin, kuten tiedonsiirtosovellukseen, selaimeen, StreetPass Mii Plazaan tai eShopiin.
-
-Tämä tarkoittaa sitä, että korttipäivityksen tekeminen versiolta, jolla on vanha Nintendo 3DS Sound -sovellus *(versiota 7.0.0 vanhemmat versiot EUR-, JPN-, KOR- tai USA-alueen vanhalla 3DS:llä)*, rikkoo [SoundHax](homebrew-launcher-(soundhax))in toiminnallisuuden! Tarvitset [vaihtoehtoisen tavan](homebrew-launcher-(alternatives)) Homebrew Launcherin käynnistämiseen!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Jos päivitit pelikortilla, joka sisältää 9.9.0:n tai sitä uudemman version *(tarkoittaen sitä, että järjestelmän versio on 9.9.0 tai uudempi, mutta selaimesi versio on -25 tai vanhempi, kuten 10.2.0-24)*, selaimesi poistui samalla, ja sinun on käytettävä "Ei selainta" -saraketta.
-{: .notice--warning}
Järjestelmäsi versio löytyy yläruudun oikeasta alakulmasta järjestelmäasetuksissa (System Settings).
-{: .notice--success}
{: .notice--info}
+Jos päivitit pelikortilla, joka sisältää 9.9.0:n tai sitä uudemman version *(tarkoittaen sitä, että järjestelmän versio on 9.9.0 tai uudempi, mutta selaimesi versio on -25 tai vanhempi, kuten 10.2.0-24)*, selaimesi poistui samalla, ja sinun on käytettävä "Ei selainta" -saraketta.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/fi_FI/get-started.txt b/_pages/fi_FI/get-started.txt
index 79f5dfb81b..c7a3eda87a 100644
--- a/_pages/fi_FI/get-started.txt
+++ b/_pages/fi_FI/get-started.txt
@@ -2,23 +2,14 @@
title: "Aloitus"
---
-Tämä sivu ohjeistaa boot9strapin asentamisen *muokkaamattomaan* 3DS:ään tai 2DS:ään. Jos sinulla on jo arm9loaderhax ja aiot päivittää sen boot9strapiin, seuraa osiota [A9LH → B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Tämä sivu opastaa sinut konsolillesi sopivaan aloituskohtaan.
-Konsolien väritykset saattavat vaihdella, mutta kiinnitä huomiota painikkeiden sijaintiin sekä eri mallien ominaisuuksiin, jotta valitset varmasti oikean mallin.
-{: .notice}
-
-Napsauta konsolisi kuvaa päätyäksesi oikealle sivulle.
-{: .notice--primary}
-
-Eri laitemallit, versiot ja alueet edellyttävät erilaisen prosessin saavuttaaksesi boot9strap-käyttöisen mukautetun laiteohjelmiston. Tämä sivu opastaa sinut konsolillesi sopivaan aloituskohtaan.
-{: .notice--info}
+Napsauta konsolisi kuvaa päätyäksesi oikealle sivulle. Konsolien väritykset saattavat vaihdella, mutta kiinnitä huomiota painikkeiden sijaintiin sekä eri mallien ominaisuuksiin, jotta valitset varmasti oikean mallin.
Jos olet jo aikaisemmin hakkeroinut 3DS-konsolisi, ja sinulla on EmuNAND-pohjainen CFW-kokoonpano, seuraa vain kaikkia ohjeita ollessasi SysNANDissa. Tietosi tullaan siirtämään EmuNANDista uuteen B9S-asennukseesi lopussa.
-{: .notice--info}
-Huomaa, että voit laajentaa oppaassa käytettyjä kuvankaappaksia napsauttamalla niiden päällä.
-{: .notice--info}
+Tämä sivu ohjeistaa boot9strapin asentamisen *muokkaamattomaan* 3DS:ään tai 2DS:ään. Jos sinulla on jo arm9loaderhax ja aiot päivittää sen boot9strapiin, seuraa osiota [A9LH → B9S](a9lh-to-b9s).
+{: .notice--primary}
Ennen aloittamista Windows-käyttäjien kannattaa asettaa tiedostotunnisteiden näyttäminen päälle käyttämällä ohjeita osiossa [Tiedostotunnisteet (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Ennen aloittamista Windows-käyttäjien kannattaa asettaa tiedostotunnisteiden n
Ennen aloittamista kannattaa tarkistaa SD-korttisi virheiden varalta käyttäen jotakin seuraavista ohjelmista: [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), tai [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Huomaa, että uudet [ntrboothax](installing-boot9strap-(ntrboothax))- ja [laitteistomodaus](installing-boot9strap(hardmod))menetelmät toimivat *kaikilla malleilla, alueilla ja versioilla*! Tähän lukeutuu myös CHN- ja TWN-alueiden konsolit, jotka eivät aikaisemmin olleet hakkeroitavissa!
-{: .notice--success}
-
{% capture notice-1 %}
On käynyt ilmi, että Nintendo jakaa CFW-käyttäjille porttikieltoja verkkotoimintoihinsa. Välttyäksesi tältä tee seuraavat toimet ennen aloittamista:
diff --git a/_pages/fi_FI/godmode9-usage.txt b/_pages/fi_FI/godmode9-usage.txt
index f232d53d69..b4a87a6022 100644
--- a/_pages/fi_FI/godmode9-usage.txt
+++ b/_pages/fi_FI/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9:n käyttäminen"
---
GodMode9 on täysillä oikeuksilla varustettu tiedostoselain Nintendo 3DS -konsolille. Sen avulla pääset käsiksi SD-korttiisi, SysNANDisi ja EmuNANDisi FAT-osioihin sekä periaatteessa mihin tahansa muuhunkin. Voit muun muassa kopioida, poistaa ja uudelleennimetä tiedostoja ja kansioita.
-{: .notice--primary}
Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD-korttisi `/luma/payloads`-kansiossa, (START)-painikkeen pohjassa pitäminen käynnistyksen aikana avaa "ketjulatausvalikon", jossa sinun on käytettävä ristiohjainta ja (A):ta avataksesi GodMode9:n näitä ohjeita varten.
-{: .notice--info}
{% capture notice %}
Kyseessä on tehokas ohjelma, jolla voi tehdä periaatteessa mitä tahansa muutoksia 3DS-konsolin kaikkiin järjestelmätietoihin. Ohjelmassa on kuitenkin erinäisiä varotoimenpiteitä, jotta et epähuomiossa vahingoittaisi konsolisi tietoja.
-
+
Järjestelmän kirjoitusoikeudet on suojattu varoituksilla, ja sinun on syötettävä painikeyhdistelmä ottaaksesi kirjoitusoikeudet käyttöön. Tärkeitä tietoja on mahdotonta ylikirjoittaa tai muokata ilman painikeyhdistelmien syöttämistä, eikä oikeuksia voi ottaa käyttöön vahingossa. On joka tapauksessa suositeltavaa tehdä säännöllisiä varmuuskopioita, ohjelman suojauksista huolimatta.
{% endcapture %}
diff --git a/_pages/fi_FI/h2testw-(windows).txt b/_pages/fi_FI/h2testw-(windows).txt
index 4e0aa640ca..2a6ef5d4dc 100644
--- a/_pages/fi_FI/h2testw-(windows).txt
+++ b/_pages/fi_FI/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
Tämä lisäosio opastaa sinua tarkistamaan SD-korttisi virheiden varalta h2testw-ohjelman avulla.
-{: .notice--info}
SD-korttisi koosta ja tietokoneesi nopeudesta riippuen tämä prosessi voi kestää jopa useita tunteja!
-{: .notice--info}
Tämä sivu on vain Windows-käyttäjille. Jos et käytä Windowsia, tutustu sivuun [F3 (Linux)](f3-(linux)) tai [F3X (Mac)](f3x-(mac)).
-{: .notice--info}
#### Tarpeet
diff --git a/_pages/fi_FI/home.txt b/_pages/fi_FI/home.txt
index e5b58061e0..10d694d7af 100644
--- a/_pages/fi_FI/home.txt
+++ b/_pages/fi_FI/home.txt
@@ -37,7 +37,7 @@ Useimmissa tapauksissa homebrew'n käyttäminen konsolillasi on täysin ilmaista
**Mukautettu laiteohjelmisto** (engl. custom firmware, "CFW") sallii kehittyneempiä hackejä, joihin ei käyttäjätilan homebrew'lla pysty. Esimerkkinä allekirjoitusten paikkaaminen, joka sallii sinun asentaa allekirjoittamattomia sovelluksia, jotka ilmestyvät suoraan HOME-valikkoosi.
-CFW:n voi asentaa mille tahansa konsolille, jonka versio on 11.5.0 tai vanhempi.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Mitä tässä oppaassa asennetaan?
diff --git a/_pages/fi_FI/homebrew-launcher-(alternatives).txt b/_pages/fi_FI/homebrew-launcher-(alternatives).txt
index 938fea6cb9..811d924d4a 100644
--- a/_pages/fi_FI/homebrew-launcher-(alternatives).txt
+++ b/_pages/fi_FI/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (muut käynnistystavat)"
---
Homebrew Launcherille on useita eri sisäänpääsy- eli käynnistystapoja.
-{: .notice--info}
Jos et voi käyttää browserhaxiä (ks. alla oleva lista), etkä omista yhtäkään näistä peleistä, eikä sinulla ole toista 3DS:ää, jolla pääsee Homebrew Launcheriin, halvin vaihtoehto on ostaa [Ocarina of Time 3D](https://amzn.to/2fkaKdp):n "Nintendo Selects" -julkaisu (varmista, että hankit konsolisi aluetta vastaavan version) sekä [PowerSaves](https://amzn.to/2fb3VY7)-laite (yhteensopiva kaikkien alueidein kanssa), ja käyttää oot3dhax-menetelmää alla olevasta listasta.
-{: .notice--info}
Varmista, että langaton yhteys on päällä, sillä udsploit (käytetään seuraavassa osiossa) tarvitsee sitä toimiakseen, eikä joillakin konsoleilla (New 3DS, New 2DS ja vanha 2DS) voi muuttaa langattoman yhteyden asetusta Homebrew Launcherissa. Langattoman yhteyden tarvitsee vain olla päällä; tukiasemaan yhdistämistä ei vaadita.
-{: .notice--info}
#### Tarpeet
diff --git a/_pages/fi_FI/homebrew-launcher-(soundhax).txt b/_pages/fi_FI/homebrew-launcher-(soundhax).txt
index e98c5f9ad3..08f4828627 100644
--- a/_pages/fi_FI/homebrew-launcher-(soundhax).txt
+++ b/_pages/fi_FI/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Homebrew Launcherille on useita eri sisäänpääsy- eli käynnistystapoja.
-{: .notice--info}
SoundHax on yhteensopiva versiosta 9.0.0 versioon 11.3.0 EUR-, JPN-, KOR- ja USA-konsoleiden kanssa.
-{: .notice--info}
Varmista, että langaton yhteys on päällä, sillä udsploit (käytetään seuraavassa osiossa) tarvitsee sitä toimiakseen, eikä joillakin konsoleilla (New 3DS, New 2DS ja vanha 2DS) voi muuttaa langattoman yhteyden asetusta Homebrew Launcherissa. Langattoman yhteyden tarvitsee vain olla päällä; tukiasemaan yhdistämistä ei vaadita.
-{: .notice--info}
{% capture notice-1 %}
Huomaa, että korttipäivitykset tuovat päivityksiä vain ydinominaisuuksiin, kuten järjestelmäasetuksiin, HOME-valikkoon jne. Korttipäivitykset eivät tuo päivityksiä Nintendo 3DS Soundiin eivätkä verkko-ominaisuuksiin, kuten tiedonsiirtosovellukseen, selaimeen, StreetPass Mii Plazaan tai eShopiin.
-
+
Tämä tarkoittaa sitä, että korttipäivityksen tekeminen versiolta, jolla on vanha Nintendo 3DS Sound -sovellus *(versiota 7.0.0 vanhemmat versiot EUR-, JPN-, KOR- tai USA-alueen vanhalla 3DS:llä)*, rikkoo [SoundHax](homebrew-launcher-(soundhax))in toiminnallisuuden! Tarvitset [vaihtoehtoisen tavan](homebrew-launcher-(alternatives)) Homebrew Launcherin käynnistämiseen!
{% endcapture %}
diff --git a/_pages/fi_FI/installing-boot9strap-(browser).txt b/_pages/fi_FI/installing-boot9strap-(browser).txt
index fee0e8eecb..69797ccd6f 100644
--- a/_pages/fi_FI/installing-boot9strap-(browser).txt
+++ b/_pages/fi_FI/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Boot9strapin asentaminen (selain)"
---
Jos olet jo hakkeroinut konsolisi aikaisemmin, ja sinulla on EmuNAND-pohjainen CFW-kokoonpano, ota huomioon, että nämä ohjeet koskevat ainoastaan SysNANDia, joten sinun tulisi seurata ohjeita sen mukaisesti. Huomaa, että termit EmuNAND ja RedNAND viittaavat [saman konseptin](http://3dbrew.org/wiki/NAND_Redirection) kahteen hiukan erilaiseen toteutukseen.
-{: .notice--info}
#### Tarpeet
diff --git a/_pages/fi_FI/installing-boot9strap-(dsiware).txt b/_pages/fi_FI/installing-boot9strap-(dsiware).txt
index 496947a0c3..dee5617261 100644
--- a/_pages/fi_FI/installing-boot9strap-(dsiware).txt
+++ b/_pages/fi_FI/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Boot9strapin asentaminen (DSiWare)"
---
On kaksi eri menetelmää asentaa boot9strap käyttäen DSiWarea versiolla 11.5.0.
-{: .notice--info}
Toinen näistä menetelmistä toimii vain neljän tietyn pelin kanssa, joita ei enää saa ostettua eShopista, toinen taas hiukan useamman eShopista vielä saatavan pelin kanssa.
-{: .notice--info}
Kumpikin menetelmä vaatii kaksi konsolia. Yhdellä 3DS:llä (tai 2DS:llä) on oltava jonkinlainen mukautettu laiteohjelmisto (kuten boot9strap tai arm9loaderhax), ja siihen viitataan nimellä *lähde-3DS*. Toisen 3DS:n (tai 2DS:n) on oltava vakiolaiteohjelmistolla versiolla 11.5.0, ja siihen viitataan nimellä *kohde-3DS*.
-{: .notice--info}
-
-Kummankin laitteen TÄYTYY olla samalta alueelta.
-{: .notice--warning}
Kummassakin menetelmässä oletetaan, että mukautetun laiteohjelmiston omaavalla 3DS:llä on joko boot9strap tai arm9loaderhax asennettuna tämän oppaan ohjeiden mukaan. Vaikka näiden menetelmien hyödyntäminen onkin mahdollista myös joillain muilla mukautetuilla laiteohjelmistoilla, ei niitä käsitellä tässä ohjeessa.
-{: .notice--info}
Kumpikin menetelmä käyttää FIRM-osioiden salaamatonta muotoa (selitetty [täällä](https://www.3dbrew.org/wiki/3DS_System_Flaws)) hyödyntävää haavoittuvuutta sekä virhettä, joka sallii DSiWare-sovellusten lukea ja kirjoittaa mihin tahansa salattussa NANDissa.
-{: .notice--info}
-{% capture notice-4 %}
Kumpikin menetelmä vaatii [siirtosovelluksen (System Transfer)](https://www.nintendo.fi/images/_downloads/_manual/_new_nintendo_3ds/KTR_MAN_SCN_Revision_May_2016_ONLINE_160614.pdf#page=95) käyttämistä, jotta tiedot voidaan siirtää lähde-3DS:ltä kohde-3DS:lle. Tiedonsiirto toimii *vain* seuraavissa järjestyksissä:
+ New 3DS tai New 2DS → New 3DS tai New 2DS
+ Vanha 3DS tai vanha 2DS → vanha 3DS tai vanha 2DS
- + Vanha 3DS tai vanha 2DS → New 3DS tai New 2DS
-{% endcapture %}
+ + Vanha 3DS tai vanha 2DS → New 3DS tai New 2DS
-{{ notice-4 | markdownify }}
+Kummankin laitteen TÄYTYY olla samalta alueelta.
+{: .notice--warning}
-Kummassakin menetelmässä lähde-3DS:n NNID jää jumiin kohde-3DS:lle, ellet tee siirtoa takaisin tai soita Nintendolle! (lisätietoja ohjeissa)
-{: .notice--danger}
-
-Tiedonsiirron voi tehdä siirtosovelluksella vain kerran viikossa yhtä NNID:tä kohden.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Tiedonsiirron voi tehdä siirtosovelluksella vain kerran viikossa yhtä NNID:tä kohden.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Boot9strapin asentaminen (DSiWare-tallennusinjektio)](installing-boot9strap-(dsiware-save-injection))
-
+
Tämä menetelmä vaatii, että lähde-3DS:llä on laillisesti hankittuna jokin seuraavista peleistä:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ Piratoidut versiot *eivät* toimi, ja kaikki nämä pelit on poistettu eShopista
{% capture notice-1 %}
[Boot9strapin asentaminen (DSiWare-peli-injektio)](installing-boot9strap-(dsiware-game-injection))
-
+
Tämä menetelmä vaatii, että lähde-3DS:llä on laillisesti hankittuna jokin peleistä, jotka ovat listattuna osiossa [boot9strapin asentaminen (injektoitavat DSiWare-pelit)](installing-boot9strap-(dsiware-game-injection-list)).
-
+
Piratoidut versiot *eivät* toimi.
{% endcapture %}
diff --git a/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection).txt b/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection).txt
index 959e97524e..5d3448ea98 100644
--- a/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,17 +3,17 @@ title: "Boot9strapin asentaminen (DSiWare-peli-injektio)"
---
Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD-korttisi `/luma/payloads`-kansiossa, (START)-painikkeen pohjassa pitäminen käynnistyksen aikana avaa "ketjulatausvalikon", jossa sinun on käytettävä ristiohjainta ja (A):ta avataksesi GodMode9:n näitä ohjeita varten.
-{: .notice--info}
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
-{: .notice--success}
Varmista ennen jatkamista, että olet lukenut kaikki huomautukset ja varoitukset osiossa [Boot9strapin asentaminen (DSiWare)](installing-boot9strap-(dsiware)).
+
+Jos et käytä oikeaa kohde-3DS:n mukaista `.firm`-tiedostoa, konsolista tulee KÄYTTÖKELVOTON! Varmista, että lataat ja käytät oikeaa tiedostoa!
{: .notice--danger}
#### Tarpeet
-* Kaksi 3DS-konsolia
+* Kaksi 3DS-perheen konsolia
+ **Lähde-3DS**: konsoli, jolla on asennettuna jonkin mukautetun laiteohjelmiston (kuten boot9strapin tai arm9loaderhaxin) *viimeisin versio*
+ **Kohde-3DS**: konsoli, jolla on vakiolaiteohjelmisto *versiolla 11.5.0*
* Yhteensopiva eShopista ladattu DSiWare-peli **lähde-3DS:llä**
diff --git a/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection-list).txt
index e14526a099..03a5c3d17c 100644
--- a/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Boot9strapin asentaminen (injektoitavat DSiWare-pelit)" #
---
Tämä on automaattisesti luotu luettelo kaikista [boot9strapin asentamiseen](installing-boot9strap-(dsiware)) soveltuvista DSiWare-peleistä.
-{: .notice--primary}
-Tämä luettelo on kappalejaettu alueittain, järjestykseen USA, EUR, JPN.
-{: .notice--info}
-
-Jokainen kappale on lajiteltu hinnan mukaan nousevasti.
-{: .notice--info}
+Tämä luettelo on kappalejaettu alueittain, järjestykseen USA, EUR, JPN. Jokainen kappale on lajiteltu hinnan mukaan nousevasti.
QR-koodeja voi skannata käyttämällä painikeyhdistelmää (L + R) HOME-valikossa ja painamalla sitten alaruudun QR-kuvaketta.
-{: .notice--info}
-Kokovaatimukset on asetettu, koska injektoitava DSiWare-peli sekä sen hakkeroitu tallennus eivät saa muokata todellisen pelin ja tallennuksen tiedostokokoja, jotta siirto onnistuu. Tämä tarkoittaa sitä, että ostetun DSiWare-pelin tulee olla tarpeeksi suuri, jotta hakkeroitu DSiWare-peli mahtuu siihen.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
@@ -164,12 +157,12 @@ Kokovaatimukset on asetettu, koska injektoitava DSiWare-peli sekä sen hakkeroit
| | Hinta | 8-merkkinen tunnus | Alue(et) | QR-koodi |
|:-:|:-:|:-:|:-:|:-:|
-| タッチで漫才! メガミの笑壺DL | 500円 | 4B394C4A | JPN | 
-| 練熟漢字中学生 | 800円 | 4B4A384A | JPN | 
-| 教えてダーリン | 800円 | 4B4F534A | JPN | 
-| 高校英単語基本400語マスター | 800円 | 4B454B4A | JPN | 
-| 中学英単語基本400語マスター | 800円 | 4B45544A | JPN | 
-| 愛してイルカ ～愛されてイルカ～ | 800円 | 4B49524A | JPN | 
-| ARC STYLE: ジュラシックワールド | 820円 | 4B4C444A | JPN | 
-| ゴー!ゴー!ココポロ | 820円 | 4B33474A | JPN | 
-| X-RETURNS | 823円 | 4B44584A | JPN | 
\ No newline at end of file
+| タッチで漫才! メガミの笑壺DL | 500 円 | 4B394C4A | JPN | 
+| 練熟漢字中学生 | 800 円 | 4B4A384A | JPN | 
+| 教えてダーリン | 800 円 | 4B4F534A | JPN | 
+| 高校英単語基本400語マスター | 800 円 | 4B454B4A | JPN | 
+| 中学英単語基本400語マスター | 800 円 | 4B45544A | JPN | 
+| 愛してイルカ ～愛されてイルカ～ | 800 円 | 4B49524A | JPN | 
+| ARC STYLE: ジュラシックワールド | 820 円 | 4B4C444A | JPN | 
+| ゴー!ゴー!ココポロ | 820 円 | 4B33474A | JPN | 
+| X-RETURNS | 823 円 | 4B44584A | JPN | 
\ No newline at end of file
diff --git a/_pages/fi_FI/installing-boot9strap-(dsiware-save-injection).txt b/_pages/fi_FI/installing-boot9strap-(dsiware-save-injection).txt
index e08ccc3e1c..e7e82008a3 100644
--- a/_pages/fi_FI/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/fi_FI/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,20 +3,17 @@ title: "Boot9strapin asentaminen (DSiWare-tallennusinjektio)"
---
Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD-korttisi `/luma/payloads`-kansiossa, (START)-painikkeen pohjassa pitäminen käynnistyksen aikana avaa "ketjulatausvalikon", jossa sinun on käytettävä ristiohjainta ja (A):ta avataksesi GodMode9:n näitä ohjeita varten.
-{: .notice--info}
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
-{: .notice--success}
Varmista ennen jatkamista, että olet lukenut kaikki huomautukset ja varoitukset osiossa [Boot9strapin asentaminen (DSiWare)](installing-boot9strap-(dsiware)).
-{: .notice--danger}
Jos et käytä oikeaa kohde-3DS:n mukaista `.firm`-tiedostoa, konsolista tulee KÄYTTÖKELVOTON! Varmista, että lataat ja käytät oikeaa tiedostoa!
{: .notice--danger}
#### Tarpeet
-* Kaksi 3DS-konsolia
+* Kaksi 3DS-perheen konsolia
+ **Lähde-3DS**: konsoli, jolla on asennettuna jonkin mukautetun laiteohjelmiston (kuten boot9strapin tai arm9loaderhaxin) *viimeisin versio*
+ **Kohde-3DS**: konsoli, jolla on vakiolaiteohjelmisto *versiolla 11.5.0*
* Jokin seuraavista haavoittuvaisista DSiWare-peleistä (piratoitu peli **ei** toimi) **lähde-3DS:llä**
diff --git a/_pages/fi_FI/installing-boot9strap-(hardmod).txt b/_pages/fi_FI/installing-boot9strap-(hardmod).txt
index ea8537d7f7..a8dbb9a9d1 100644
--- a/_pages/fi_FI/installing-boot9strap-(hardmod).txt
+++ b/_pages/fi_FI/installing-boot9strap-(hardmod).txt
@@ -4,16 +4,12 @@ title: "Boot9strapin asentaminen (laitteistomodaus)"
Mainion oppaan konsolisi laitteistomodaamiseen löydät [täältä](https://gbatemp.net/threads/414498/)
(englanniksi). Jos käytät New 3DS:ää, lue [tämä](https://github.com/Plailect/Guide/issues/681) ja [tämä](https://github.com/Plailect/Guide/issues/1185) ennen laitteistomodausta.
-{: .notice--info}
Tämä menetelmä käyttää FIRM-osioiden salaamatonta muotoa (known-plaintext, selitetty [täällä](https://www.3dbrew.org/wiki/3DS_System_Flaws)) hyödyntävää haavoittuvuutta.
-{: .notice--info}
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
-{: .notice--success}
Tämä toimii *kaikilla* versioilla New 3DS:llä, New 2DS:llä, vanhalla 3DS:llä sekä vanhalla 2DS:llä, kun käytät konsoliasi vastaavaa `.firm`-tiedostoa.
-{: .notice--success}
#### Tarpeet
diff --git a/_pages/fi_FI/installing-boot9strap-(homebrew-launcher).txt b/_pages/fi_FI/installing-boot9strap-(homebrew-launcher).txt
index 2c5ac1b0bd..0be3cf8c98 100644
--- a/_pages/fi_FI/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/fi_FI/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Boot9strapin asentaminen (Homebrew Launcher)"
---
Jos olet jo hakkeroinut konsolisi aikaisemmin, ja sinulla on EmuNAND-pohjainen CFW-kokoonpano, ota huomioon, että nämä ohjeet koskevat ainoastaan SysNANDia, joten sinun tulisi seurata ohjeita sen mukaisesti. Huomaa, että termit EmuNAND ja RedNAND viittaavat [saman konseptin](http://3dbrew.org/wiki/NAND_Redirection) kahteen hiukan erilaiseen toteutukseen.
-{: .notice--info}
#### Ohjeet
@@ -20,6 +19,8 @@ Jos olet jo hakkeroinut konsolisi aikaisemmin, ja sinulla on EmuNAND-pohjainen C
+ Jos saat *edelleen* "PM INIT FAILED" -virheen, kokeile käyttää [safehaxin r19-julkaisua](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Jos ohjelma jumiutuu, pakota konsoli sulkeutumaan pitämällä virtapainiketta pohjassa hetken aikaa ja yritä sitten uudelleen
1. Jos haavoittuvuuden hyödyntäminen onnistui, SafeB9SInstallerin pitäisi avautua
+ + Jos Luma3DS:n määritysvalikko aukeaa SafeB9SInstallerin sijasta, sammuta konsolisi ja varmista, että `safehaxpayload.bin` on SD-korttisi juuressa
+ + Jos Luma3DS:n määritysvalikko aukeaa siitä huolimatta, että`safehaxpayload.bin` on SD-korttisi juuressa, varmista, että sinulla on [tiedostotunnisteet näkyvillä](file-extensions-(windows))
##### Vaihe II – Boot9strapin asentaminen
diff --git a/_pages/fi_FI/installing-boot9strap-(mset).txt b/_pages/fi_FI/installing-boot9strap-(mset).txt
index 0b16491e16..a38b64a6f1 100644
--- a/_pages/fi_FI/installing-boot9strap-(mset).txt
+++ b/_pages/fi_FI/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Boot9strapin asentaminen (MSET)"
---
Jos olet jo hakkeroinut konsolisi aikaisemmin, ja sinulla on EmuNAND-pohjainen CFW-kokoonpano, ota huomioon, että nämä ohjeet koskevat ainoastaan SysNANDia, joten sinun tulisi seurata ohjeita sen mukaisesti. Huomaa, että termit EmuNAND ja RedNAND viittaavat [saman konseptin](http://3dbrew.org/wiki/NAND_Redirection) kahteen hiukan erilaiseen toteutukseen.
-{: .notice--info}
#### Tarpeet
diff --git a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..488807404a
--- /dev/null
+++ b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Boot9strapin asentaminen (ntrboot)"
+---
+
+#### Tarpeet
+
+* Magneetti, jolla voit asettaa konsolisi lepotilaan (jos käytössä on läpällinen malli)
+* Flash-korttisi, jolla on asennettuna ntrboot
+* SafeB9SInstallerin [viimeisin julkaisu](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* Boot9strapin [viimeisin julkaisu](https://github.com/SciresM/boot9strap/releases/latest) *(tavallinen boot9strap-tiedosto; ei `devkit`- eikä `ntr`-tiedosto)*
+* Luma3DS:n [viimeisin julkaisu](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-tiedosto)*
+* Homebrew-[aloituspakkaus](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Ohjeet
+
+##### Vaihe I – Valmistelut
+
+1. Sammuta konsolisi
+1. Aseta SD-korttisi tietokoneeseesi
+1. Kopioi `SafeB9SInstaller.firm` SD-korttisi juureen ja uudelleennimeä se siellä muotoon `boot.firm`
+1. Kopioi `starter.zip`-pakkauksen _sisältö_ SD-korttisi juureen
+1. Luo `boot9strap`-niminen kansio SD-korttisi juureen
+1. Kopioi boot9strap-`.zip`-pakkauksesta `boot9strap.firm` ja `boot9strap.firm.sha` SD-korttisi `/boot9strap/`-kansioon
+
+ 
+ {: .notice--info}
+
+1. Aseta SD-korttisi takaisin konsoliisi
+1. Käynnistä konsolisi
+
+##### Vaihe II – Ntrboot
+
+1. Käytä magneettia löytääksesi konsolistasi kohdan, jossa lepotilan anturi aktivoituu
+ + Tämä ei ole tarpeen läpättömillä malleilla (vanha 2DS)
+1. Sammuta konsolisi
+1. Aseta flash-korttisi konsoliisi
+1. Käynnistä konsolisi pitäen magneettia lepotilasensorin kohdalla (tai käyttämällä lepotilakytkintä läpättömillä malleilla) samalla, kun pidät pohjassa (START) + (SELECT) + (X) -painikeyhdistelmää
+ + Lepotilan aktivoiminen magneetilla saattaa vaatia useamman yrityksen, koska anturi on sijoitettu huonosti
+1. Jos haavoittuvuuden hyödyntäminen onnistui, SafeB9SInstallerin pitäisi avautua
+
+##### Vaihe III – Boot9strapin asentaminen
+
+1. Odota, kunnes kaikki turvatarkistukset on suoritettu
+1. Syötä kehotettaessa annettu painikeyhdistelmä asentaaksesi boot9strapin
+1. Kun toiminto on suoritettu, pakota konsolisi sammuksiin pitämällä virtapainiketta pohjassa
+ + Konsolisi käynnistyy vain SafeB9SInstaller-ruutuun, kunnes olet käynyt läpi seuraavan vaiheen
+
+##### Vaihe IV – Luma3DS:n määrittäminen
+
+1. Aseta SD-korttisi tietokoneeseesi
+1. Poista `boot.firm` SD-korttisi juuresta
+1. Kopioi Luma3DS-`.7z`-pakkauksesta `boot.firm` SD-korttisi juureen
+1. Aseta SD-korttisi takaisin konsoliisi
+1. Käynnistä konsolisi
+1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon
+ + Jos saat mustan ruudun, [seuraa tätä vianmääritysohjetta](troubleshooting#ts_sys_b9s)
+1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
+ + **"Show NAND or user string in System Settings"**
+1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
+ + Jos saat virheen, jatka vain seuraavaan osioon
+
+___
+
+Jatka osioon [Asennuksen viimeistely](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Vaihe V – Ntrbootin poistaminen
+
+Tämä on vaihtoehtoinen vaihe, jonka avulla voit palauttaa flash-korttisi alkuperäiseen tilaansa (jotta sitä voi taas käyttää sen normaaleihin käyttötarkoituksiin).
+{: .notice--info}
+
+Älä käy läpi tätä vaihetta, ennen kuin olet käynyt läpi tämän osion muut vaiheet.
+{: .notice--warning}
+
+1. Avaa **lähde-3DS**:llä Luma3DS:n ketjulataaja pitämällä (START)-painiketta pohjassa konsolin käynnistyessä
+1. Valitse "ntrboot_flasher"
+1. Valitse "Restore Flash"
+1. Paina (Y):tä jatkaaksesi
+1. Odota, kunnes toiminto on suoritettu
+1. Paina (B):tä palataksesi päävalikkoon
+1. Valitse "EXIT" sammuttaaksesi **lähde-3DS**:n
\ No newline at end of file
diff --git a/_pages/fi_FI/move-emunand.txt b/_pages/fi_FI/move-emunand.txt
index ae2f331182..e8cb0b1e0d 100644
--- a/_pages/fi_FI/move-emunand.txt
+++ b/_pages/fi_FI/move-emunand.txt
@@ -3,10 +3,8 @@ title: "EmuNANDin siirtäminen"
---
Tässä lisäosiossa opastetaan EmuNANDin sisällön siirtäminen uuteen SysNAND-kokoonpanoon sekä EmuNAND-osion poistaminen tämän jälkeen. Huomaa, että termit EmuNAND ja RedNAND viittaavat [saman konseptin](http://3dbrew.org/wiki/NAND_Redirection) kahteen hiukan erilaiseen toteutukseen.
-{: .notice--info}
-Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD-korttisi `/luma/payloads`-kansiossa, (START)-painikkeen pohjassa pitäminen käynnistyksen aikana avaa "ketjulatausvalikon", jossa sinun on käytettävä ristiohjainta ja (A):ta avataksesi GodMode9:n näitä ohjeita varten.
-{: .notice--info}
+Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD-korttisi `/luma/payloads`-kansiossa, (START)-painikkeen pohjassa pitäminen käynnistyksen aikana avaa "ketjulatausvalikon", jossa sinun on käytettävä ristiohjainta ja (A):ta avataksesi GodMode9:n näitä ohjeita varten.
**Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap tai arm9loaderhax käyttääksesi tätä ohjetta.**
{: .notice--danger}
diff --git a/_pages/fi_FI/ntr-and-cubic-ninja.txt b/_pages/fi_FI/ntr-and-cubic-ninja.txt
index 0568f38b56..cdc5a502f1 100644
--- a/_pages/fi_FI/ntr-and-cubic-ninja.txt
+++ b/_pages/fi_FI/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR ja Cubic Ninja"
---
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
-{: .notice--success}
-**NTR & Cubic Ninja -menetelmä toimii VAIN JPN-alueen New 3DS:llä!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Tarpeet
diff --git a/_pages/fi_FI/ntrboot.txt b/_pages/fi_FI/ntrboot.txt
new file mode 100644
index 0000000000..7c0914f0c0
--- /dev/null
+++ b/_pages/fi_FI/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "Ntrboot"
+---
+
+Jos asensit jo ntrbootin flash-kortillesi, voit seurata osiota [Boot9strapin asentaminen (ntrboot)](installing-boot9strap-(ntrboot)) saadaksesi ohjeita sen käyttämiseen.
+{: .notice--success}
+
+Boot9strapin asentaminen ntrbootin avulla vaatii yhteensopivan DS-/DSi-flash-kortin, jolle voi asentaa ntrbootin. Seuraavassa listassa on tällä hetkellä tuetut flash-kortit:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+Ntrbootin asentamiseen flash-kortille on kaksi eri menetelmää.
+
+Kumpikin näistä menetelmistä vaatii pienen magneetin, jos kohdekonsoli on läpällinen (kaikki 3DS-perheen konsolit paitsi vanha 2DS, jossa on lepotilalle kytkin). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Huomaa, että flash-korttia ei voi käyttää sen normaaleihin käyttötarkoituksiin silloin, kun ntrboot on asennettuna sille. Osion lopussa on valinnaiset ohjeet, joiden avulla voit poistaa ntrbootin flash-kortiltasi asennettuasi boot9strapin.
+
+Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **vioittaa** jäljitelmä-flash-korttia ja tehdä siitä pysyvästi käyttökelvottoman. Vaikka tämä onkin epätodennäköistä, on suositeltavaa käyttää vain alkuperäisiä kortteja. Jotta välttyisit jäljitelmäkortin saamiselta, on suositeltavaa käyttää flash-kortin ostamiseen hyvämaineista sivustoa (kuten [NDS Card](http://www.nds-card.com/)ia).
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Ntrbootin asentaminen (mukautettu laiteohjelmisto)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Ntrbootin asentaminen (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). Tämä on väliaikaissivu, johon on tulossa ohjeet ntrboothaxin asentamiseen Powersavesin avulla.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/fi_FI/region-changing.txt b/_pages/fi_FI/region-changing.txt
index d198ac38e7..68a4ee755a 100644
--- a/_pages/fi_FI/region-changing.txt
+++ b/_pages/fi_FI/region-changing.txt
@@ -3,16 +3,12 @@ title: "Alueen vaihtaminen"
---
Tämä lisäosio opastaa sinua vaihtamaan alueen CFW-SysNANDillasi. Tämä tapahtuu asentamalla sen alueen 9.2.0-CTRTransfer-näköistiedosto, johon haluat vaihtaa.
-{: .notice--primary}
-**Alueen vaihtaminen on lähes täysin tarpeetonta, koska Luma3DS tukee suoraan alueen ulkopuolisia pelejä sekä pelikohtaista [alueen emulointia](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
-{: .notice--success}
Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD-korttisi `/luma/payloads`-kansiossa, (START)-painikkeen pohjassa pitäminen käynnistyksen aikana avaa "ketjulatausvalikon", jossa sinun on käytettävä ristiohjainta ja (A):ta avataksesi GodMode9:n näitä ohjeita varten.
-{: .notice--info}
Tämä prosessi poistaa NNID:si linkityksen konsolistasi, koska se ei alueen vaihdon jälkeen ole enää yhteensopiva. NNID:t ovat lukittuja siihen konsolisi alueeseen, jolla ne luotiin, eikä niitä voi siirtää alueiden välillä ilman [todella monimutkaista ja vaativaa prosessia](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Tämä prosessi poistaa NNID:si linkityksen konsolistasi, koska se ei alueen vai
Tämän prosessin jälkeen ainoastaan **New 3DS:t, joilla ei ole koskaan käyty eShopissa** sekä **vanhat 3DS:t** pääsevät eShopiin, kun uusi NNID on luotu uudelle alueelle. Aluevaihdetut New 3DS:t, joilla on jo käyty eShopissa niiden alkuperäisellä alueella, eivät voi luoda uutta NNID:tä eivätkä pääse eShopiin!
{: .notice--warning}
-Huomaa, että toisinaan eShop ei syystä tai toisesta toimi edes niillä konsoleilla, joilla sen pitäisi. Tämä on täysin Nintendon palvelimien vika, enkä minä voi hallita niitä.
-{: .notice--warning}
-
-Joskus saattaa myös käydä toisinpäin kuin ylläolevassa huomautuksessa; eShop toimii konsoleilla, joilla sen ei pitäisi (kuten jotkin New 3DS:t). Syytä tälle ei tällä hetkellä tiedetä.
-{: .notice--warning}
+Huomaa, että toisinaan eShop ei syystä tai toisesta toimi edes niillä konsoleilla, joilla sen pitäisi. Tämä on täysin Nintendon palvelimien vika, enkä minä voi hallita niitä. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Syytä tälle ei tällä hetkellä tiedetä.
Alueen vaihtaminen CTRTransferin (jota tämä menetelmä käyttää) avulla aiheuttaa uudelleenkäynnistyspaikkausten rikkoutumisen. Syytä tälle ei tiedetä, mutta toistaiseksi vanhan 3DS:n käyttäjät eivät voi pelata laajennetun muistitilan pelejä (kuten Monster Hunter, Super Smash Bros. ja Pokémon Sun/Moon) ennen konsolin alustamista.
-{: .notice--warning}
-Älä koskaan alusta New 2DS:ää, jonka versio on 11.4.0 tai vanhempi, tai et pysty määrittämään alkuasetuksia loppuun asti!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap tai arm9loaderhax käyttääksesi tätä ohjetta.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Tarpeet
diff --git a/_pages/fi_FI/site-navigation.txt b/_pages/fi_FI/site-navigation.txt
index d901372eea..c99cd06f63 100644
--- a/_pages/fi_FI/site-navigation.txt
+++ b/_pages/fi_FI/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [UKK](faq)
+ [Tiedostotunnisteet (Windows)](file-extensions-(windows))
+ [Asennuksen viimeistely](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Aloitus (New 3DS)](get-started-(new-3ds))
+ [Aloitus (Old 3DS)](get-started-(old-3ds))
+ [Aloitus](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Boot9strapin asentaminen (laitteistomodaus)](installing-boot9strap-(hardmod))
+ [Boot9strapin asentaminen (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Boot9strapin asentaminen (MSET)](installing-boot9strap-(mset))
-+ [Boot9strapin asentaminen (ntrboothax)](installing-boot9strap-(homebrew-launcher))
++ [ntrboot](ntrboot)
+ [EmuNANDin siirtäminen](move-emunand)
+ [NTR ja Cubic Ninja](ntr-and-cubic-ninja)
+ [Alueen vaihtaminen](region-changing)
diff --git a/_pages/fi_FI/troubleshooting.txt b/_pages/fi_FI/troubleshooting.txt
index 455db7a1bc..ee9257af01 100644
--- a/_pages/fi_FI/troubleshooting.txt
+++ b/_pages/fi_FI/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Vianmääritys"
Jos et pysty käynnistämään konsoliasi, seuraa tilannettasi vastaavan kohdan ohjeita. Kun jokin sivun ratkaisuista toimii ongelmaasi, voit jatkaa pääopasta
(Tämä osio on melko pitkä, kokeile Ctrl+F-näppäinyhdistelmää etsiäksesi ongelmasi.)
-{: .notice--primary}
-**Jos et saa ongelmaasi korjattua tämän osion avulla ja tarvitset apua, liitä SD-kortiltasi kaikki relevantit .log-tiedostot [gistiin](https://gist.github.com/) ja valmistaudu selittämään täsmällisesti ongelmasi sekä asiat, joita olet jo yrittänyt sen ratkaisemiseksi.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
-{: .notice--success}
## DSi-/DS-ominaisuudet eivät toimi näiden ohjeiden läpikäymisen jälkeen
diff --git a/_pages/fi_FI/uninstall-cfw.txt b/_pages/fi_FI/uninstall-cfw.txt
index acbb67e763..06f607729d 100644
--- a/_pages/fi_FI/uninstall-cfw.txt
+++ b/_pages/fi_FI/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "CFW:n poistaminen"
---
Tämä poistaa kokonaan mukautetun laiteohjelmiston konsolistasi, mukaan lukien boot9Strapin ja Luma3DS:n, jotta konsolin voi palauttaa takaisin vakiolaiteohjelmistoon.
-{: .notice--danger}
Kaikista digitaalisesti allekirjoittamattomista (laittomista) peleistä tulee käyttökelvottomia, ja ne voi poistaa käsin järjestelmäasetusten (System Settings) tiedonhallinnasta (Data Management). Käytä [tallennuksenhallintaohjelmaa](https://github.com/J-D-K/JKSM/releases/latest) varmuuskopioidaksesi kaikki haluamasi tallennukset näistä allekirjoittamattomista peleistä.
-{: .notice--info}
Tämä ei vaikuta sinun NNID-käyttäjääsi, laillisesti ostettuihin peleihisi eikä niiden tallennuksiin.
-{: .notice--info}
Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD-korttisi `/luma/payloads`-kansiossa, (START)-painikkeen pohjassa pitäminen käynnistyksen aikana avaa "ketjulatausvalikon", jossa sinun on käytettävä ristiohjainta ja (A):ta avataksesi GodMode9:n näitä ohjeita varten.
-{: .notice--info}
#### Tarpeet
diff --git a/_pages/fi_FI/updating-b9s.txt b/_pages/fi_FI/updating-b9s.txt
index 118bc7134c..0dd8d3a139 100644
--- a/_pages/fi_FI/updating-b9s.txt
+++ b/_pages/fi_FI/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "B9S:n päivittäminen"
---
Tämä sivu on boot9strap-käyttäjille, jotka haluavat päivittää asennuksensa viimeisimpään versioon.
-{: .notice--info}
Huomioi, että Luma3DS:n viimeisin pääjulkaisu *ei* ole yhteensopiva boot9strapin version 1.0 kanssa. Sen käyttäminen *vaatii*, että päivität boot9strap-asennuksesi versioon 1.2 seuraamalla tämän osion ohjeita.
-{: .notice--warning}
{% capture notice-1 %}
On käynyt ilmi, että Nintendo jakaa CFW-käyttäjille porttikieltoja verkkotoimintoihinsa. Välttyäksesi tältä tee seuraavat toimet ennen aloittamista:
diff --git a/_pages/fr_FR/9.2.0-ctrtransfer.txt b/_pages/fr_FR/9.2.0-ctrtransfer.txt
index 5b8ff90d50..0cb60a6f9c 100644
--- a/_pages/fr_FR/9.2.0-ctrtransfer.txt
+++ b/_pages/fr_FR/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
C’est la section Add-on pour installer une 9.2.0 CTRTransfer image sur votre console.
-{: .notice--primary}
Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" .
-{: .notice--info}
Ne formatez jamais une New 2DS en version inférieure à 11.4.0 ou il vous sera impossible d'effectuer la configuration initiale, ce qui résultera en un Brick de votre console !
{: .notice--danger}
diff --git a/_pages/fr_FR/a9lh-to-b9s.txt b/_pages/fr_FR/a9lh-to-b9s.txt
index 7897975874..a0840750bc 100644
--- a/_pages/fr_FR/a9lh-to-b9s.txt
+++ b/_pages/fr_FR/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "Mise à jour vers boot9strap"
---
Cette page est faite pour que les utilisateurs actuels de arm9loaderhax puissent mettre à jour leurs consoles vers boot9strap.
-{: .notice--info}
Toutes les futures versions de Luma3DS ne seront faites qu'exclusivement dans le format ".firm", lequel ne sera compatible qu'boot9strap et sighax. Cela veut dire que pour pouvoir recevoir les dernières mises à jour de Luma3DS, vous devez utiliser cette page pour mettre à jour votre installation.
-{: .notice--info}
+
+Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
Si vous avez un code PIN d'actif sur Luma3DS, SafeB9SInstaller vous donnera l'erreur "OTP Crypto Fail" tant que vous n'aurez pas désactiver votre code PIN (vous pouvez le réactiver après la mise à jour).
{: .notice--warning}
-Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
Il y a eu des informations concernant une vague de bannissements contre les utilisateurs de CFW par Nintendo. Pour vous protéger, merci de bien faire les étapes suivantes avant de commencer ce guide:
diff --git a/_pages/fr_FR/cart-update.txt b/_pages/fr_FR/cart-update.txt
index 3a608b75a1..ba6401e44d 100644
--- a/_pages/fr_FR/cart-update.txt
+++ b/_pages/fr_FR/cart-update.txt
@@ -3,20 +3,18 @@ title: "Mise à jour par Cartouche"
---
Toutes les cartouches de jeu contiennent une copie du firmware nécessaire pour pouvoir y jouer, ce qui permet à n'importe qui de mettre à jour sa console vers celui-ci (même sans connexion internet).
-{: .notice--info}
{% capture notice-1 %}
Les mises à jour par cartouche vont mettre uniquement à jour les fonctionnalités principales telles que les Paramètres Systèmes, le Menu Home, etc. Les mises à jour par cartouche ne vont pas mettre à jour le Studio Son Nintendo 3DS et les fonctionnalités Internet comme le Transfert Système, le Navigateur Internet, la Place Mii Streetpass ou le Nitendo eShop.
-
+
Cela signifie qu'à l'aide d'une Mise à jour par Cartouche depuis une version contenant une ancienne version du Stuio Son Nintendo 3DS *(<7.0.0 pour les Old 3DS venants de ces régions : EUR, JPN, KOR, et USA)* à celle qui a présentée une version plus récente du Studio Son Nintendo 3DS, [Soundhax](homebrew-launcher-(soundhax)) cessera de fonctionner ! Vous aurez besoin d'une [méthode alternative](homebrew-launcher-(alternatives)) pour entrer dans l'Homebrew Launcher!
+
+Cela signifie également qu'une mise à jour par cartouche N'INSTALLERA PAS de navigateur internet sur votre console si elle n'en a pas déjà un. **Seule** la partie principale du numéro de version du firmware sera mise à jour *(de 2.1.0-0 vers 6.0.0-0 par exemple)*. Le dernier nombre *(le -0)* ne changera **pas**.
{% endcapture %}
{{ notice-1 | markdownify }}
-Cela signifie également qu'une mise à jour par cartouche N'INSTALLERA PAS de navigateur internet sur votre console si elle n'en a pas déjà un. **Seule** la partie principale du numéro de version du firmware sera mise à jour *(de 2.1.0-0 vers 6.0.0-0 par exemple)*. Le dernier nombre *(le -0)* ne changera **pas**.
-{: .notice--warning}
-
Mettre à jour avec un cartouche de jeu qui contient une version supérieure à 9.9.0 va enlever votre navigateur internet jusqu'à qu'une mise à jour en ligne sera effectuée
{: .notice--danger}
diff --git a/_pages/fr_FR/credits.txt b/_pages/fr_FR/credits.txt
index cbfbecbea0..7a17eac5cc 100644
--- a/_pages/fr_FR/credits.txt
+++ b/_pages/fr_FR/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
Si je vous ai oublié, contactez-moi et j'ajouterai votre nom.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/fr_FR/f3-(linux).txt b/_pages/fr_FR/f3-(linux).txt
index 6011fae05c..c509de45a7 100644
--- a/_pages/fr_FR/f3-(linux).txt
+++ b/_pages/fr_FR/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
Il s'agit d'une section en plus pour la vérification de votre carte SD afn de trouver des erreurs à l'aide de F3.
-{: .notice--info}
Selon la taille de votre carte SD et la vitesse de votre ordinateur, ce processus peut prendre jusqu'à plusieurs heures !
-{: .notice--info}
Cette page est uniquement destinée aux utilisateurs de Linux. Si vous n'êtes pas sous Linux, utilisez [H2testw (windows)](h2testw-(windows)) ou [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/f3x-(mac).txt b/_pages/fr_FR/f3x-(mac).txt
index 83bcff1c0c..4cb3135d40 100644
--- a/_pages/fr_FR/f3x-(mac).txt
+++ b/_pages/fr_FR/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
Il s'agit d'une section en plus pour la vérification de votre carte SD afn de trouver des erreurs à l'aide de F3X.
-{: .notice--info}
Selon la taille de votre carte SD et la vitesse de votre ordinateur, ce processus peut prendre jusqu'à plusieurs heures !
-{: .notice--info}
Cette page est pour les utilisateurs de Mac uniquement. Si vous n’êtes pas sur Mac, consultez [H2testw (windows)](h2testw-(windows)) ou [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/faq.txt b/_pages/fr_FR/faq.txt
index 39cfda95b6..7d6264f6ed 100644
--- a/_pages/fr_FR/faq.txt
+++ b/_pages/fr_FR/faq.txt
@@ -6,53 +6,53 @@ title: "FAQ"
**Q :** *Je suis sur la dernière version du système, est-ce que ma console est hackable ?*
**R :** Oui
-
+
**Q :** *Comment mettre à jour Luma3DS ?*
**R :** Utilisez Luma3DS Updater
-
+
**Q :** *J’ai entendu parler de cette chose payante (Gateway, Sky3DS, etc.), est-ce quelque chose dont j’ai besoin ?*
**R :** Non. boot9strap est une méthode de chargement hax qui s’exécute au démarrage.
-
+
**Q :** *Comment puis-je transférer mes sauvegardes de mon Gateway vers les jeux installés sur ma console ?*
**R :** Voir [cet article](https://gbatemp.net/threads/425743/)
-
+
**Q :** *De quoi ai-je besoin pour suivre ce guide ?*
**R:** Ce guide peut être intégralement suivi en n'utilisant que des logiciels gratuits
-
+
**Q :** *Est-il risqué de hacker ma console ?*
**R :** Les Bricks sont *en pratique* presque impossibles, à moins
que vous n'ignoriez/ne contourniez les étapes de vérification.
-
+
**Q :** *Puis-je exécuter des homebrew et des émulateurs avec cela ?*
**R :** Oui ! Un Custom Firmware permet non seulement d'utiliser l'Homebrew Launcher, mais il vous donnera également accès aux hacks sur toutes les versions. Cela signifie que vous le garderez pour toujours, même avec des mises à jour.
-
+
**Q :** *Puis-je l'utiliser pour jouer à des jeux d’autres régions ?*
**R :** Luma3DS prend en charge les patchs Region Free, ce qui permet aux utilisateurs d’installer des jeux de toutes les régions sans aucune modification supplémentaire.
-
+
**Q :** *Est-il sûr de mettre à jour ma SysNAND avec un CFW ?*
**R :** Oui. C’est sûr, arrêtez de demander.
-
+
**Q :** *Où dois-je aller pour avoir de l'aide ?*
**R:** Pour obtenir de l'aide, demandez de l'aide à [Nintendo Homebrew sur Discord(Anglais)](https://discord.gg/MWxPgEp).
-
+
**Q :** *Puis-je faire cela avec une carte SD 4 Go (ou moins) ?*
**R :** Oui !
-
+
**Q :** *Puis-je utiliser une carte SD 128 Go (ou plus) ?*
**R :** Oui, mais certains utilisateurs ont signalé des ralentissements lors de l’utilisation de cartes SD de grandes capacités. Notez que vous ne pouvez pas formater la carte en exFAT ; vous devez la formater en FAT32.
-
+
**Q :** *Comment puis-je utiliser une nouvelle carte SD à la fin de ces étapes ?*
**R :** Il suffit de copier tous les fichiers de l'ancienne carte SD sur la nouvelle.
-
+
**Q :** *Puis-je garder mon NNID ?*
**R :** Si vous démarrez avec un NNID et suivez toutes les étapes, vous garderez votre NNID à la fin.
-
+
**Q :** *Et le Transferts de données ?*
**R :** Quand vous avez complété le guide, vous pouvez faire un transfert de système depuis et vers une 3DS ou 2DS en B9S exactement de la même façon que vous le feriez avec une console stock ou avec un EmuNAND (Vous allez perde tout jeu que vous n'avez pas acheté/thème/DLC dans le transfert; Les sauvegardes vont rester même pour les jeux qui sont perdus.).
-
+
**Q :** *Puis-je faire cela sans ordinateur (ex : un téléphone Android) ?*
**R :** Tout ce dont vous avez besoin est la possibilité de mettre des fichiers sur une carte SD !
-
+
**Q :** *À l'aide ! Quelque chose s'est mal passé et maintenant je ne peux plus démarrer...*
**R :** Consultez le [guide de dépannage](troubleshooting).
diff --git a/_pages/fr_FR/file-extensions-(windows).txt b/_pages/fr_FR/file-extensions-(windows).txt
index f780e86072..0a6dad1393 100644
--- a/_pages/fr_FR/file-extensions-(windows).txt
+++ b/_pages/fr_FR/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "Extensions de fichier (Windows)"
---
C'est une section supplémentaire pour désactiver le fait que Windows cache les extensions des fichiers.
-{: .notice--info}
Cela rendra la tâche plus simple pour trouver les différents fichiers mentionnés dans la suite de ce guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/fr_FR/finalizing-setup.txt b/_pages/fr_FR/finalizing-setup.txt
index 939a51797d..3cfe171f94 100644
--- a/_pages/fr_FR/finalizing-setup.txt
+++ b/_pages/fr_FR/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalisation de l'installation"
#### Vue d'ensemble
-{% capture notice-2 %}
Le fichier `boot.firm` est ce qui est lancé par boot9strap lui-même après qu'il ait fini le chargement de la NAND, et peut être n’importe quel payload arm9 valide dans le format FIRM. Ce fichier peut être remplacé à tout moment, même si Luma3DS permet le lancement d’autres payloads arm9 au format FIRM à l’aide du chainloader Luma3DS .
-
+
Dans ce cas, nous utilisons Luma3DS de [AuroraWright](https://github.com/AuroraWright/) pour démarrer directement une SysNAND patchée, nous permettant de contourner complètement la nécessité d'une EmuNAND quelconque, ce qui simplifie grandement l'utilisation d'une 3DS piratée en plus d'économiser de l'espace sur votre carte SD.
-
+
Durant cette étape, nous allons également configurer les programmes suivants :
+ **FBI** *(Permet d'installer des jeux et applications au format CIA)*
@@ -18,10 +17,6 @@ Durant cette étape, nous allons également configurer les programmes suivants :
+ **GodMode9** *(Programme multifonction qui peut effectuer des opérations relatives à la NAND et aux cartouches)*
+ **Homebrew Launcher Loader** *(Permet de lancez l'Homebrew Launcher comme une application normale grâce à Rosalina Magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Ce dont vous aurez besoin
* La dernière version de [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(le fichier`.cia`)*
@@ -134,8 +129,10 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou
___
{% capture notice-10 %}
-Vous pouvez à présent ouvrir Luma3DS Updater et appuyer sur (A) pour mettre à jour Luma3DS dans sa dernière version.
+Vous pouvez à présent ouvrir Luma3DS Updater et appuyer sur (A) pour mettre à jour Luma3DS dans sa dernière version.
+
Cela est différent d'une mise à jour du système ; le programme se contente de télécharger et extraire les fichiers de la dernière version de Luma3DS.
+
Cela ne met à jour que les fichiers de Luma3DS présents sur la carte SD. Si vous démarrez votre console sans sa carte SD, elle utilisera la version de Luma3DS que vous avez placée dans votre CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ Cela ne met à jour que les fichiers de Luma3DS présents sur la carte SD. Si vo
{% capture notice-6 %}
Votre console démarrera désormais Luma3DS CFW SysNAND (c'est-à-dire sur votre SysNAND avec le CFW Luma3DS) par défaut.
+
Vous pouvez maintenir (Select) lors du démarrage pour entrer dans le menu de configuration de Luma3DS.
+
Vous pouvez maintenant maintenir (Start) au démarrage pour lancer le menu de chainloader Luma3DS (Notez que le menu du chainloader Luma3DS ne s’affiche que s’il détecte plus d'un payload).
+
Vous pouvez maintenant maintenir (Start) + (Select) + (X) au démarrage pour dump le bootrom ARM11 (`boot11.bin`), le bootrom ARM9 (`boot9.bin`) et l'OTP unique de votre console (`OTP.bin`) dans le dossier `/boot9strap/` de votre carte SD (Notez que cela n'affichera aucune notification).
+
Vous pouvez maintenant appuyer simultanément sur (L) + (Bas) + (Select) pour démarrer le menu Rosalina intégré à Luma3DS. Pour une liste plus complète des fonctionnalités de Rosalina, vous pouvez vous rendre sur [la page GitHub de Luma3DS v8.0](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ Pour utilisez [NTR CFW](https://github.com/44670/BootNTR/), installez [BootNTR S
{% capture notice-7 %}
Supprimez de la racine de votre carte SD tous les autres fichiers qui n'apparaissent *pas* dans l'image suivante. Si vous en avez, laissez le dossier `DCIM` car il contient des photos prises avec la caméra de la 3DS:
-
+
{% endcapture %}
diff --git a/_pages/fr_FR/flashing-ntrboot-(custom-firmware).txt b/_pages/fr_FR/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..8c960248fe
--- /dev/null
+++ b/_pages/fr_FR/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+titre: "Flasher ntrboot (Custom Firmware)"
+---
+
+Avant de commencez , assurez vous de connaître les informations sur [Ntrboot](ntrboot)
+
+Le linker ne pourra pas être utilisée dans sa fonction principale pendant que Ntrboot sera dessus . Des étapes facultatives se trouvent à la fin des instructions de flash Ntrboot , concernant la suppresion de l'exploit de votre Linker .
+{: .notice--warning}
+
+Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne inutilsable . C'est peu probable , mais notez que seule les originaux fonctionnent avec Ntrboot . Pour réduire les chances d'avoir une contrefaçon utilisez ([NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Ce dont vous aurez besoin
+
+* Votre ntrboot compatible DS / DSi flashcart :
+ + L’Acekard 2i ou R4i Gold 3DS RTS
+* Deux dispositifs de famille de 3DS
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/fr_FR/flashing-ntrboot-(powersaves).txt b/_pages/fr_FR/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/fr_FR/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/fr_FR/get-started-(new-3ds).txt b/_pages/fr_FR/get-started-(new-3ds).txt
index b0b7f8b3dd..ca27f781f5 100644
--- a/_pages/fr_FR/get-started-(new-3ds).txt
+++ b/_pages/fr_FR/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Bien Démarrer (New 3DS)"
---
-Sélectionnez la page appropriée pour votre version dans le tableau ci-dessous.
-{: .notice--primary}
+Sélectionnez la page appropriée pour votre version dans le tableau ci-dessous. Notez que les champs "De" et "À" sont inclusifs. Cela signifie - par exemple - que la ligne "De 9.0.0 à 9.2.0" inclue 9.0.0, 9.1.0 et 9.2.0.
-Notez que les champs "De" et "À" sont inclusifs. Cela signifie - par exemple - que la ligne "De 9.0.0 à 9.2.0" inclue 9.0.0, 9.1.0 et 9.2.0.
-{: .notice--info}
-
-Notez que les derniers chiffres de votre version système (qui sont précédés par un slash) réfèrent à votre version de navigateur. Actuellement, la version du navigateur n'a aucun rapport avec la New 3DS dans ce guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Actuellement, la version du navigateur n'a aucun rapport avec la New 3DS dans ce guide.
**Pour toutes les versions, vous pouvez également faire une [Mise à jour par Cartouche](cart-update) vers une version supérieure de la même colonne.**.
-{: .notice--info}
La version de votre console peut être trouvée en bas à droite de l'écran supérieur de la 3DS - dans les Paramètres Systèmes de la console.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ La version de votre console peut être trouvée en bas à droite de l'écran sup
TOUTES LES VERSIONS
|
- Installer boot9strap (ntrboothax)
(Nécessite un Linker compatible) ou Installation boot9strap (Hardmod)
(Nécessite de la soudure) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/fr_FR/get-started-(old-3ds).txt b/_pages/fr_FR/get-started-(old-3ds).txt
index 5605ceba5f..3916963c30 100644
--- a/_pages/fr_FR/get-started-(old-3ds).txt
+++ b/_pages/fr_FR/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Bien Démarrer (Old 3DS)"
---
-Sélectionnez la page appropriée à votre version dans le tableau ci-dessous.
-{: .notice--primary}
+Sélectionnez la page appropriée à votre version dans le tableau ci-dessous. Notez que les champs "De" et "À" sont inclusifs. Cela signifie - par exemple - que la ligne "De 9.0.0 à 9.2.0" inclut 9.0.0, 9.1.0 et 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Si votre version est -0, vous n'avez pas de navigateur internet installé, une version supérieure à -0 indique qu'un navigateur est installé.
-{% capture notice-1 %}
-Les 2 dernières colonnes du tableau correspondent au dernier nombre de votre numéro de version (qui correspond à la version du navigateur de votre console). Si votre version est -0, vous n'avez pas de navigateur internet installé, une version supérieure à -0 indique qu'un navigateur est installé.
-
-Les champs "De" et "À" sont inclusifs. Cela signifie - par exemple - que la ligne "De 9.0.0 à 9.2.0" inclut 9.0.0, 9.1.0 et 9.2.0.
-
Dans le cas de "5.0.0-0U" par exemple, vous devez suivre la colonne "Sans navigateur" et la ligne "De 5.0.0 à 5.1.0" car le système est dans une version qui est dans cet intervalle et n'a pas de navigateur installé.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
**Pour toutes les versions, vous pouvez également faire une [Mise à jour par Cartouche](cart-update) vers une version supérieure de la même colonne.**.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Les mises à jour par cartouche vont mettre uniquement à jour les fonctionnalités principales telles que les Paramètres Systèmes, le Menu Home, etc. Les mises à jour par cartouche ne vont pas mettre à jour le Studio Son Nintendo 3DS et les fonctionnalités Internet comme le Transfert Système, le Navigateur Internet, la Place Mii Streetpass ou le Nitendo eShop.
-
-Cela signifie qu'à l'aide d'une Mise à jour par Cartouche depuis une version contenant une ancienne version du Stuio Son Nintendo 3DS *(<7.0.0 pour les Old 3DS venants de ces régions : EUR, JPN, KOR, et USA)* à celle qui a présentée une version plus récente du Studio Son Nintendo 3DS, [Soundhax](homebrew-launcher-(soundhax)) cessera de fonctionner ! Vous aurez besoin d'une [méthode alternative](homebrew-launcher-(alternatives)) pour entrer dans l'Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Si vous avez mis à jour avec une cartouche de jeu contenant la une version 9.9.0 ou supérieure *(c'est à dire que vous avez une version 9.9.0 ou supérieure, mais que votre navigateur est en version -25 ou inférieure comme 10.2.0-24)*, votre navigateur a été supprimé et vous devez suivre la colonne "Sans navigateur".
-{: .notice--warning}
La version de votre console peut être trouvée en bas à droite de l'écran supérieur de la 3DS - dans les Paramètres Systèmes de la console.
-{: .notice--success}
{: .notice--info}
+Si vous avez mis à jour avec une cartouche de jeu contenant la une version 9.9.0 ou supérieure *(c'est à dire que vous avez une version 9.9.0 ou supérieure, mais que votre navigateur est en version -25 ou inférieure comme 10.2.0-24)*, votre navigateur a été supprimé et vous devez suivre la colonne "Sans navigateur".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/fr_FR/get-started.txt b/_pages/fr_FR/get-started.txt
index d4f2220738..82e459de42 100644
--- a/_pages/fr_FR/get-started.txt
+++ b/_pages/fr_FR/get-started.txt
@@ -2,23 +2,14 @@
title: "Bien Démarrer"
---
-Cette page donne des instructions sur comment installer boot9strap sur une 3DS ou 2DS vierge. Si vous avez déjà installé arm9loaderhax et que vous voulez passer à boot9strap, suivez [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Cette page vous aidera à trouver par où commencer en fonction de votre console.
-Les couleurs des consoles dans l'image peuvent varier, mais notez le positionnement des boutons et les fonctionnalités de chaque console pour vous assurez que vous choisissez la bonne.
-{: .notice}
-
-Cliquez sur l'image qui correspond à votre console pour vous rendre à la page appropriée.
-{: .notice--primary}
-
-Des consoles de modèles, de versions et/ou de régions différentes requièrent des étapes différentes pour atteindre l'objectif final d'un Custom Firmware basé sur boot9strap. Cette page vous aidera à trouver par où commencer en fonction de votre console.
-{: .notice--info}
+Cliquez sur l'image qui correspond à votre console pour vous rendre à la page appropriée. Les couleurs des consoles dans l'image peuvent varier, mais notez le positionnement des boutons et les fonctionnalités de chaque console pour vous assurez que vous choisissez la bonne.
Si vous avez déjà hacké votre 3DS dans le passé et avez un CFW basé sur une EmuNAND, suivez simplement toutes les instructions depuis votre SysNAND. Vos données seront transférées depuis votre EmuNAND vers votre nouvelle installation de B9S à la fin du guide.
-{: .notice--info}
-Les screenshots dans ce guide peuvent être agrandis en cliquant dessus.
-{: .notice--info}
+Cette page donne des instructions sur comment installer boot9strap sur une 3DS ou 2DS vierge. Si vous avez déjà installé arm9loaderhax et que vous voulez passer à boot9strap, suivez [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Avant de commencer, les utilisateurs de Windows devraient permettre d'afficher les extensions de fichiers suivant ce guide [Extensions de fichiers (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Avant de commencer, les utilisateurs de Windows devraient permettre d'afficher l
Avant de commencer, assurez vous que votre carte SD n'a pas d'erreurs en utilisant [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), ou [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Notez bien que les nouvelles méthodes [ntrboothax](installing-boot9strap-(ntrboothax)) et [hardmod](installing-boot9strap-(hardmod)) fonctionnent dans *tous appareils, régions, et versions*! Cela inclut des consoles des régions CHN et TWN qui étaient précédemment impiratables !
-{: .notice--success}
-
{% capture notice-1 %}
Il y a eu des informations concernant une vague de bannissements contre les utilisateurs de CFW par Nintendo. Pour vous protéger, merci de bien faire les étapes suivantes avant de commencer ce guide:
diff --git a/_pages/fr_FR/godmode9-usage.txt b/_pages/fr_FR/godmode9-usage.txt
index 46da1aace8..6b9cdb1891 100644
--- a/_pages/fr_FR/godmode9-usage.txt
+++ b/_pages/fr_FR/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "Utilisation de GodMode9"
---
GodMode9 est un navigateur de fichiers avec un accès complet pour la console de Nintendo 3DS, vous donnant accès à votre carte SD, les partitions FAT à l’intérieur de votre SysNAND et EmuNAND et fondamentalement rien d’autre. Parmi les autres fonctionnalités, vous pouvez copier, supprimer, renommer des fichiers et créer des dossiers.
-{: .notice--primary}
Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" .
-{: .notice--info}
{% capture notice %}
**Il est très puissant, il vous donne les moyens de faire fondamentalement toute modification possibles et imaginables à toutes les données système disponibles sur la console 3DS. Cependant, des précautions sont prises afin que vous n’endommagez accidentellement les données de votre console.
-
+
Le système de permissions d’écriture vous protège en proposant des avertissements et vous oblige à entrer dans une séquence de déverrouillage pour vous permettre d'accéder aux autorisations d’écriture. Il n’est pas possible de remplacer ou de modifier toute choses importantes sans de telles séquences de déverrouillage et il n'est pas possible de déverrouiller accidentellement quelque chose. Comme toujours, soyez intelligent, garder des sauvegardes, juste pour être sûr.**
{% endcapture %}
diff --git a/_pages/fr_FR/h2testw-(windows).txt b/_pages/fr_FR/h2testw-(windows).txt
index 385bc0a57a..4e5e348235 100644
--- a/_pages/fr_FR/h2testw-(windows).txt
+++ b/_pages/fr_FR/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
Il s'agit d'une section en plus pour la vérification de votre carte SD afn de trouver des erreurs à l'aide de h2testw.
-{: .notice--info}
Selon la taille de votre carte SD et la vitesse de votre ordinateur, ce processus peut prendre jusqu'à plusieurs heures !
-{: .notice--info}
Cette page est pour les utilisateurs de Windows uniquement. Si vous n’êtes pas sous Windows, consultez [F3 (linux)](f3-(linux)) ou [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/home.txt b/_pages/fr_FR/home.txt
index d1c6578d87..0fcf94585c 100644
--- a/_pages/fr_FR/home.txt
+++ b/_pages/fr_FR/home.txt
@@ -37,7 +37,7 @@ Dans la plupart des cas, exécuter des homebrews sur votre appareil est 100 % gr
Un **Custom Firmware** ("CFW") vous permet d'utiliser des hacks plus avancés que les homebrew "userland" (ci-dessus) ne permettent pas. Par exemple, les patchs de signatures vous permettent d'installer des titres non signés directement sur votre menu HOME.
-Un CFW peut être facilement mis en place sur toute console en version 11.5.0 ou inférieure.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Qu'est-ce que ce guide me fait installer ?
diff --git a/_pages/fr_FR/homebrew-launcher-(alternatives).txt b/_pages/fr_FR/homebrew-launcher-(alternatives).txt
index 718efea0d0..e5bf15e25c 100644
--- a/_pages/fr_FR/homebrew-launcher-(alternatives).txt
+++ b/_pages/fr_FR/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
Il existe différentes méthodes pour lancer l'Homebrew Launcher.
-{: .notice--info}
Si vous ne possédez aucun de ces jeux ni une seconde 3DS ayant accès au Homebrew Launcher, le moins cher est d'acheter une copie "Nintendo Selects" d'[Ocarina of Time 3D](https://amzn.to/2fkaKdp) (faites attention à bien acheter une cartouche de la région que votre console) ainsi qu'une [Powersaves](https://amzn.to/2fb3VY7) (compatible avec toutes les régions), puis de suivre les instructions concernant oot3dhax ci-dessous.
-{: .notice--info}
Assurez vous que la que communication sans fil de votre appareil est allumée, comme udsploit (utilisé dans la page suivante) aura besoin du module sans fil soit actif pour fonctionner, de plus certains appareils (New 3DS, New 2DS et Old 2DS) ne peuvent pas régler la Communication sans fil depuis le l'Homebrew Launcher. La Communication sans fil doit juste être allumée; la connexion à un point d’accès n’est pas nécessaire.
-{: .notice--info}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/homebrew-launcher-(soundhax).txt b/_pages/fr_FR/homebrew-launcher-(soundhax).txt
index 7fc197f673..aea12cd84a 100644
--- a/_pages/fr_FR/homebrew-launcher-(soundhax).txt
+++ b/_pages/fr_FR/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Il existe différentes méthodes pour lancer l'Homebrew Launcher.
-{: .notice--info}
SoundHax est compatible pour les versions du firmware comprises entre 9.0.0 et 11.3.0 pour les régions EUR, JPN, KOR et USA.
-{: .notice--info}
Assurez vous que la que communication sans fil de votre appareil est allumée, comme udsploit (utilisé dans la page suivante) aura besoin du module sans fil soit actif pour fonctionner, de plus certains appareils (New 3DS, New 2DS et Old 2DS) ne peuvent pas régler la Communication sans fil depuis le l'Homebrew Launcher. La Communication sans fil doit juste être allumée; la connexion à un point d’accès n’est pas nécessaire.
-{: .notice--info}
{% capture notice-1 %}
Les mises à jour par cartouche vont mettre uniquement à jour les fonctionnalités principales telles que les Paramètres Systèmes, le Menu Home, etc. Les mises à jour par cartouche ne vont pas mettre à jour le Studio Son Nintendo 3DS et les fonctionnalités Internet comme le Transfert Système, le Navigateur Internet, la Place Mii Streetpass ou le Nitendo eShop.
-
+
Cela signifie qu'à l'aide d'une Mise à jour par Cartouche depuis une version contenant une ancienne version du Stuio Son Nintendo 3DS *(<7.0.0 pour les Old 3DS venants de ces régions : EUR, JPN, KOR, et USA)* à celle qui a présentée une version plus récente du Studio Son Nintendo 3DS, [Soundhax](homebrew-launcher-(soundhax)) cessera de fonctionner ! Vous aurez besoin d'une [méthode alternative](homebrew-launcher-(alternatives)) pour entrer dans l'Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/fr_FR/installing-boot9strap-(browser).txt b/_pages/fr_FR/installing-boot9strap-(browser).txt
index d90ea4e1d0..5b41b7fb81 100644
--- a/_pages/fr_FR/installing-boot9strap-(browser).txt
+++ b/_pages/fr_FR/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installer boot9strap (Browser)"
---
Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une EmuNAND, ce guide s'applique exclusivement à votre SysNAND et vous devez suivre toutes les instructions depuis ou vers votre SysNAND. Notez que les termes EmuNAND et RedNAND font référence à des implémentations légèrement différentes du [même concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware).txt b/_pages/fr_FR/installing-boot9strap-(dsiware).txt
index 7068936ddc..a894327494 100644
--- a/_pages/fr_FR/installing-boot9strap-(dsiware).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installer boot9strap (DSiWare)"
---
Il y a deux différentes méthodes pour installer boot9strap à l'aide de DSiWare sur 11.5.0.
-{: .notice--info}
Une de ces méthodes ne marche uniquement avec 4 jeux spécifiques qui ne sont plus vendus sur l'eShop, alors que la deuxième marche avec d'autres jeux toujours vendus sur l'eShop.
-{: .notice--info}
Les deux méthodes ont besoin de deux consoles. Une 3DS (ou 2DS) doit avoir une sorte de custom firmware (=Logiciel Modifié) (tel que boot9strap ou arm9loaderhax) et est comptée comme "3DS source" alors que l'autre 3DS (ou 2DS) est en 11.5.0 sur son logiciel stock (=Original) et est comptée comme la "3DS qui reçoit".
-{: .notice--info}
-
-Les deux 3DS (ou 2DS) doivent ABSOLUMENT avoir chacun un logiciel venant de la même région (EUR, JAP, US...).
-{: .notice--warning}
Les deux méthodes sont conçues en assumant que le logiciel modifié de la "3DS source" est composé soit de boot9strap ou de arm9loaderhax, installé en ayant suivi ce guide. Bien qu’il soit possible de faire ces méthodes avec un autre type de logiciel modifié, c’est hors de la portée de ce guide et à vos risques et périls.
-{: .notice--info}
Les deux méthodes utilisent une combinaison de l'exploit (=Faille) "FIRM partitions know-plaintext", détaillé [ici](https://www.3dbrew.org/wiki/3DS_System_Flaws), et une autre faille qui permet aux titres DSiWare de lire et écrire sur la NAND (=Noyau) encryptée.
-{: .notice--info}
-{% capture notice-4 %}
Les deux méthodes exigent qui vous fassiez un [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) (Transfert de système) depuis une 3DS (ou 2DS) en CFW (=Custom Firmware = Logiciel modifié) vers une 3DS (ou 2DS) en logiciel stock dans le cadre de la procédure. Les transferts de données fonctionneront *seulement* dans les cas suivants*:
+ New 3DS ou New 2DS -> New 3DS ou New 2DS
+ Old 3DS ou Old 2DS -> Old 3DS ou Old 2DS
- + Old 3DS ou Old 2DS -> New 3DS ou New 2DS
-{% endcapture %}
+ + Old 3DS ou Old 2DS -> New 3DS ou New 2DS
-{{ notice-4 | markdownify }}
+Les deux 3DS (ou 2DS) doivent ABSOLUMENT avoir chacun un logiciel venant de la même région (EUR, JAP, US...).
+{: .notice--warning}
-Dans les deux méthodes, le NNID (=Nintendo ID) de la "3DS source" va être coincé sur la "3ds qui reçoit" tant que vous ne referez pas un transfert de système ou que vous n'aurez pas appelé Nintendo ! (Les détails peuvent être trouvés dans les instructions)
-{: .notice--danger}
-
-Les transferts de système ne peuvent seulement être faits une fois par semaine et par NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Les transferts de système ne peuvent seulement être faits une fois par semaine et par NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installer boot9strap (Injection de jeu DSiWare)](installing-boot9strap-(dsiware-save-injection))
-
+
Cette méthode exige que la "3DS source" ai obtenu légalement (Donc payés sur l'eShop avant qu'ils soient retirés) l'un de ces jeux :
+ "Fieldrunners"
@@ -57,9 +45,9 @@ Une version piratée du jeu ne *marchera pas*, et tous ces jeux ont été retir
{% capture notice-1 %}
[Installer boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
Cette méthode exige que la "3DS source" achète ou à déjà obtenu légalement l'un des jeux listés dans la page [Installer boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) .
-
+
Une version piratée du jeu ne *marchera pas*.
{% endcapture %}
diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
index 814b0624f9..c7584b99b0 100644
--- a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installer boot9strap (DSiWare Game Injection)"
---
Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" .
-{: .notice--info}
Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Avant de commencer, assurez-vous que vous avez lu tous les mises en garde à propos de [l'installation de boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+Si vous n'utilisez pas le bon `.firm` correspondant à la 3DS cible, vous allez BRICK! Assuez-vous de télécharger et d'utiliser le `. firm` correct!
{: .notice--danger}
#### Ce dont vous aurez besoin
-* Deux consoles 3DS
- **La 3DS source**: La 3DS faisant tourner un Custom Firmware (comme boot9strap ou arm9loaderhax) *dans sa version la plus récente*
- + **La 3DS cible**: la 3DS en firmware normal *en 11.5.0*
+* Deux dispositifs de famille de 3DS
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Acheter (ou déjà posséder) un jeu DSiWare compatible sur l’eShop de ** la source 3DS **
+ Une copie piratée du jeu ne fonctionnera ** pas **
+ Pour obtenir la liste des jeux compatibles, consultez la page [Installer boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt
index ec48c63929..f6453da48b 100644
--- a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installer boot9strap (Liste des jeux pour l'injection DSiWare)"
---
C'est une liste automatiquement générée de tous les jeux DSiWare compatibles avec [Installer boot9strap (DSiWare)](installing-boot9strap-(dsiware)).
-{: .notice--primary}
-Cette liste est découpé par région, dans l'ordre USA, EUR et JPN.
-{: .notice--info}
-
-Chaque section est triée par prix croissant.
-{: .notice--info}
+Cette liste est découpé par région, dans l'ordre USA, EUR et JPN. Chaque section est triée par prix croissant.
Les QR codes peuvent êtres scannés en appuyant sur (L + R) dans le menu principal de la 3DS, puis en appuyant sur l'icône QR sur l'écran du bas.
-{: .notice--info}
-La taille des fichiers est importante car le DSiWare injecté et sa sauvegarde hackée ne doivent pas avoir une tailles différente pour pouvoir être transférés correctement, donc le DSiWare "hôte" doit être assez gros pour contenir le DSiWare hacké.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
index b697abc9fc..bad8def5dd 100644
--- a/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installer boot9strap (Injection de sauvegarde DSiWare)"
---
Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" .
-{: .notice--info}
Pour utiliser les liens suivants [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Avant de commencer, assurez-vous que vous avez lu tous les mises en garde à propos de [l'installation de boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
Si vous n'utilisez pas le bon `.firm` correspondant à la 3DS cible, vous allez BRICK! Assuez-vous de télécharger et d'utiliser le `. firm` correct!
{: .notice--danger}
#### Ce dont vous aurez besoin
-* Deux consoles 3DS
- **La 3DS source**: La 3DS faisant tourner un Custom Firmware (comme boot9strap ou arm9loaderhax) *dans sa version la plus récente*
- + **La 3DS cible**: la 3DS en firmware normal *en 11.5.0*
+* Deux dispositifs de famille de 3DS
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Posséder (et avoir installé) un des titres DSiware exploitables suivants (une copie piratée du jeu ne fonctionnera **pas**) sur **la 3DS source**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/fr_FR/installing-boot9strap-(hardmod).txt b/_pages/fr_FR/installing-boot9strap-(hardmod).txt
index 7b011a2648..65acac991d 100644
--- a/_pages/fr_FR/installing-boot9strap-(hardmod).txt
+++ b/_pages/fr_FR/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installer boot9strap (Hardmod)"
---
Un excellent guide pour obtenir un hardmod se trouve [ici](https://gbatemp.net/threads/414498/). Si vous avez une New 3DS, lisez [cette page](https://github.com/Plailect/Guide/issues/681) et [cette page](https://github.com/Plailect/Guide/issues/1185) avant de modifier votre 3DS.
-{: .notice--info}
Ceci est une implémentation de l'exploit "FIRM partitions known-plaintext" qui est décrit [ici](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Cela fonctionne sur la New3DS, Old3DS, New 2DS et Old 3DS sur *toutes* les versions pour lesquelles vous avez un fichier `.firm` correspondant.
-{: .notice--success}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/installing-boot9strap-(homebrew-launcher).txt b/_pages/fr_FR/installing-boot9strap-(homebrew-launcher).txt
index 54ee0c32e9..033debe644 100644
--- a/_pages/fr_FR/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/fr_FR/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installer boot9strap (Homebrew Launcher)"
---
Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une EmuNAND, ce guide s'applique exclusivement à votre SysNAND et vous devez suivre toutes les instructions depuis ou vers votre SysNAND. Notez que les termes EmuNAND et RedNAND font référence à des implémentations légèrement différentes du [même concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une E
+ Si vous obtenez encore une erreur "PM INIT FAILED", essayez d’utiliser la [version r19 de safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Si la console freeze (ne répond plus), forcez-la simplement à s'éteindre on maintenant le bouton Power, puis réessayez
1. Si l'exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+ + Si vous lancez dans le menu de configuration de Luma3DS au lieu de SafeB9SInstaller, éteignez votre appareil et faire en sorte que `safehaxpayload.bin` existe à la racine de votre carte SD
+ + S’il apparaît que «`safehaxpayload.bin` existe à la racine de votre carte SD mais vous lancez toujours dans le menu de configuration de Luma3DS, s’assurer que vous avez [activé l’option permettant d’afficher les fichier extensions](file-extensions-(windows))
### Section II - Installation de boot9strap
diff --git a/_pages/fr_FR/installing-boot9strap-(mset).txt b/_pages/fr_FR/installing-boot9strap-(mset).txt
index 61724a93b1..68db1aa5c8 100644
--- a/_pages/fr_FR/installing-boot9strap-(mset).txt
+++ b/_pages/fr_FR/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installer boot9strap (MSET)"
---
Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une EmuNAND, ce guide s'applique exclusivement à votre SysNAND et vous devez suivre toutes les instructions depuis ou vers votre SysNAND. Notez que les termes EmuNAND et RedNAND font référence à des implémentations légèrement différentes du [même concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..6ccbc4a0a3
--- /dev/null
+++ b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installer boot9strap (ntrboot)"
+---
+
+#### Ce dont vous aurez besoin
+
+* Un aimant qui déclenche le mode veille de votre console
+* Votre linker DS
+* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, pas le fichier `devkit` et ni le fichier `ntr`)*
+* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(le fichier `.7z`)*
+* Le Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Préparation
+
+1. Éteignez votre 3DS
+1. Insérez votre carte SD dans votre ordinateur
+1. Copiez `SafeB9SInstaller.firm` à la racine de votre carte SD et renommez en `boot.firm`
+1. Copier _le contenu de_ `starter.zip` vers la racine de votre carte SD
+1. Créez un dossier à la racine de votre carte SD nommé `boot9strap`
+1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD
+
+ 
+ {: .notice--info}
+
+1. Réinsérez votre carte SD dans votre 3DS
+1. Allumez à présent votre 3DS
+
+##### Section II - ntrboot
+
+1. Utilisez l’aimant pour repérer l’emplacement sur votre appareil où la sonde de sommeil est déclenchée
+ + Cette étape n’est pas nécessaire sur les consoles de style non-pliante (tels que les 2DS)
+1. Éteignez votre 3DS
+1. Insérez votre linker dans votre console
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Supprimez le fichier `boot.firm` de la racine de votre carte SD s'il existe
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Allumez à présent votre 3DS
+1. Votre console va démarrer dans la configuration de Luma3DS
+ + Si vous obtenez un écran noir, [suivez ce guide de problèmes et dépannage](troubleshooting#ts_sys_b9s)
+1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
+ + **"Show NAND or user string in System Settings"**
+1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+ + Si vous obtenez une erreur, continuez à la prochaine page
+
+___
+
+Continuer vers [Finalisation de l'installation](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/fr_FR/move-emunand.txt b/_pages/fr_FR/move-emunand.txt
index d135fd95c0..7cf4897b1c 100644
--- a/_pages/fr_FR/move-emunand.txt
+++ b/_pages/fr_FR/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Transférer votre EmuNAND vers votre SysNAND"
---
Ceci est une section complémentaire qui vous permettra de déplacer le contenu de votre EmuNAND vers votre CFW SysNAND, puis de supprimer l'ancienne partition EmuNAND. Notez que les termes EmuNAND et RedNAND font référence à des implémentations légèrement différentes du [même concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" .
-{: .notice--info}
+Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" .
**Vous devez avoir déjà installé Luma3DS et boot9strap ou arm9loaderhax pour utiliser ceci.**
{: .notice--danger}
diff --git a/_pages/fr_FR/ntr-and-cubic-ninja.txt b/_pages/fr_FR/ntr-and-cubic-ninja.txt
index 6bf7221fee..dd3e690710 100644
--- a/_pages/fr_FR/ntr-and-cubic-ninja.txt
+++ b/_pages/fr_FR/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR et Cubic Ninja"
---
Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**Cubic Ninja NTR fonctionnera sur New 3DS JPN UNIQUEMENT !**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/ntrboot.txt b/_pages/fr_FR/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/fr_FR/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/fr_FR/region-changing.txt b/_pages/fr_FR/region-changing.txt
index e9706b7910..9402c5e1da 100644
--- a/_pages/fr_FR/region-changing.txt
+++ b/_pages/fr_FR/region-changing.txt
@@ -3,16 +3,12 @@ title: "Changement de Région"
---
Il s’agit de la section Extensions afin de changer la région de votre CFW SysNAND. On peut le faire en installant l'image CTRTransfer 9.2.0 de la région à laquelle vous souhaitez passer.
-{: .notice--primary}
-**Il est quasiment inutile de changer la région de sa 3DS car Luma3DS permet de lancer des jeux d'autres régions et d'émuler des [changements de région individuellement](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) pour chaque titre.**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" .
-{: .notice--info}
Ce processus déliera votre NNID de votre console, car celui-ci ne sera plus compatible avec. Les NNIDs sont restreints à la région de la console qui les a créés, et ne peuvent pas être transférés dans une autre régions sans [manipulations complexes et avancées](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Ce processus déliera votre NNID de votre console, car celui-ci ne sera plus com
A l'issue de ce processus, seules **les New 3DS qui n'ont jamais accédé à l'eshop auparavant** et **toutes les Old 3DS** seront capables d'accéder à l'eshop après avoir créé un nouvel NNID associé à la nouvelle région de la console. Les New 3DS qui ont déjà accédé à l'eshop depuis leur région d'origine ne pourront pas créer un nouvel NNID ni accéder à l'eshop depuis leur nouvelle région!
{: .notice--warning}
-Notez que parfois, pour une raison inconnue, l'eshop ne fonctionnera pas même sur une console sur laquelle il devrait. Ceci est entièrement dû aux serveurs de Nintendo, et je n'ai aucun contrôle dessus.
-{: .notice--warning}
-
-Similaire à l’avertissement ci-dessus, notez que parfois l’eShop marchera inexplicablement sur les consoles qui ne devrait pas (par exemple, certaines New 3DS). La cause est actuellement inconnue.
-{: .notice--warning}
+Notez que parfois, pour une raison inconnue, l'eshop ne fonctionnera pas même sur une console sur laquelle il devrait. Ceci est entièrement dû aux serveurs de Nintendo, et je n'ai aucun contrôle dessus. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). La cause est actuellement inconnue.
Le changement de région de votre 3DS en utilisant un CTRTransfer (ce que vous fait faire cette méthode) semble interférer avec les divers patchs de redémarrage. La cause de cela est inconnue, mais pour maintenant, les utilisateurs d'Old3DS ne pourront pas jouer à des jeux utilisant un mode de mémoire étendue (comme Monster Hunter, Super Smash Bros et Pokémon Soleil / Lune) jusqu'à ce qu’ils ne formatent leurs appareils.
-{: .notice--warning}
-Ne formatez jamais une New 2DS en version inférieure à 11.4.0 ou il vous sera impossible d'effectuer la configuration initiale, ce qui résultera en un Brick de votre console !
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**Vous devez avoir déjà installé Luma3DS et boot9strap ou arm9loaderhax pour utiliser ceci.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/site-navigation.txt b/_pages/fr_FR/site-navigation.txt
index e035638246..71fc6187ea 100644
--- a/_pages/fr_FR/site-navigation.txt
+++ b/_pages/fr_FR/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [Les Extensions de fichiers (Windows)](file-extensions-(windows))
+ [Finalisation de l'installation](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Bien démarrer (New 3DS)](get-started-(new-3ds))
+ [Bien démarrer (Old 3DS)](get-started-(old-3ds))
+ [Bien démarrer](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installer boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installer boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installer boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installer boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Déplacer l'EmuNAND](move-emunand)
+ [NTR et Clubic Ninja](ntr-and-cubic-ninja)
+ [Changement de Région](region-changing)
diff --git a/_pages/fr_FR/troubleshooting.txt b/_pages/fr_FR/troubleshooting.txt
index 3729809057..9a98863dfe 100644
--- a/_pages/fr_FR/troubleshooting.txt
+++ b/_pages/fr_FR/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Problèmes et Dépannage"
Si vous ne parvenez pas à démarrer votre 3DS, recherchez la section qui vous concerne et suivez les instructions correspondantes. Une fois qu'une solution fonctionne pour vous, vous pouvez passer à la suite du guide principal
(Cette section est plutôt longue, essayez de rechercher votre problème avec Ctrl+F)
-{: .notice--primary}
-**Si vous n'arrivez toujours pas à résoudre votre problème et avez besoin d'aide, copiez le contenu de tous les fichiers .log pertinents présents à la racine de votre carte SD dans un [Gist](https://gist.github.com/), puis venez demander de l'aide avec une description détaillée de votre problème et de ce que vous avez essayé.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## La fonction DSi / DS ne fonctionne plus après avoir fini le guide
diff --git a/_pages/fr_FR/uninstall-cfw.txt b/_pages/fr_FR/uninstall-cfw.txt
index 562b7f7bb7..ab2b5d3f35 100644
--- a/_pages/fr_FR/uninstall-cfw.txt
+++ b/_pages/fr_FR/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Désinstaller CFW"
---
Ceci supprimera complètement le CFW de votre console, y compris Boot9Strap et Luma3DS, dans le but de restaurer la console en version stock.
-{: .notice--danger}
Tous les jeux (illégitimes) non signés seront rendues inutilisables et peuvent être supprimés manuellement à l’aide de la section de gestion des données des paramètres système. Utilisez [JKSM](https://github.com/J-D-K/JKSM/releases/latest) pour sauvegarder les sauvegardes pour ces jeux non signés (illégitimes) dont vous vous souciez.
-{: .notice--info}
Cela n’affectera pas votre NNID, n’importe quel jeux légitimement achetés ou des sauvegardes pour ces jeux légitimement achetés.
-{: .notice--info}
Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" .
-{: .notice--info}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/updating-b9s.txt b/_pages/fr_FR/updating-b9s.txt
index d76db0d27c..90efce1973 100644
--- a/_pages/fr_FR/updating-b9s.txt
+++ b/_pages/fr_FR/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Mettre à jour B9S"
---
Cette page s'adresse aux utilisateurs de boot9strap déjà présent sur leurs console afin de le mettre à jour vers la dernière version.
-{: .notice--info}
Notez bien que la récent version majeure de Luma3DS n'est pas compatible avec la version 1.0 de boot9strap. Cela *nécessite* que vous mettez à jour votre installation de boot9strap vers la version 1.2 en suivant les instructions de cette page.
-{: .notice--warning}
{% capture notice-1 %}
Il y a eu des informations concernant une vague de bannissements contre les utilisateurs de CFW par Nintendo. Pour vous protéger, merci de bien faire les étapes suivantes avant de commencer ce guide:
diff --git a/_pages/he_IL/9.2.0-ctrtransfer.txt b/_pages/he_IL/9.2.0-ctrtransfer.txt
index a4a83ae26a..637beb9322 100644
--- a/_pages/he_IL/9.2.0-ctrtransfer.txt
+++ b/_pages/he_IL/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
זהו מדריך הרחבה המסביר על ביצוע CTRTransfer אל 9.2.0.
-{: .notice--primary}
**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
שימו לב שאם יש לכם קבצי מטען אחרים מ`GodMode9.firm` בתיקיית `/luma/payloads/` על כרטיס הSD שלכם, החזקת (Start) בהפעלה תציג תפריט שבו תצטרכו להשתמש בחיצים ובכפתור ה(A) כדי לבחור ב"GodMode9" בשביל ההוראות האלה.
-{: .notice--info}
לעולם אל תבצעו פרמוט על New 2DS בגרסה נמוכה מ-11.4.0 כי לא תוכלו לסיים את ההגדרה הראשונית!
{: .notice--danger}
diff --git a/_pages/he_IL/a9lh-to-b9s.txt b/_pages/he_IL/a9lh-to-b9s.txt
index 6fc0d75967..0fc5b40f29 100644
--- a/_pages/he_IL/a9lh-to-b9s.txt
+++ b/_pages/he_IL/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH אל B9S"
---
דף זה מיועד למשתמשי arm9loaderhax קיימים לעדכן את מכשיריהם לboot9strap.
-{: .notice--info}
כל המהדורות הבאות של Luma3DS יוצרו בתוך פורמט ה'firm' בלבד, שיתמוך רק בboot9strap ובsighax. זה אומר שכדי להמשיך לקבל את העדכונים האחרונים של Luma3DS עליכם להשתמש בדף הזה כדי לעדכן את ההתקנה שלכם.
-{: .notice--info}
+
+**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
אם יש לכם קוד בLuma3DS, אז SafeB9SInstaller יביא לכם שגיאת "OTP Crypto Fail" אלא אם כן אתם מבטלים זמנית את הקוד (אתם יכולים להפעיל אותו מחדש אחרי העדכון).
{: .notice--warning}
-**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
-
{% capture notice-1 %}
היו דיווחים על גל של באנים שנינטנדו נתנו למי שפרץ. כדי להגן על עצמכם, תעשו את השלבים הבאים לפני שאתם מתחילים את המדריך:
diff --git a/_pages/he_IL/cart-update.txt b/_pages/he_IL/cart-update.txt
index 9cc44622fe..6561564252 100644
--- a/_pages/he_IL/cart-update.txt
+++ b/_pages/he_IL/cart-update.txt
@@ -3,20 +3,18 @@ title: "עדכון עם משחק פיזי"
---
כל עותק של משחק כולל בתוכו את העדכון מערכת שצריך על מנת להפעיל אותו, אשר נותן לכל מי שעל גרסא נמוכה להשתמש במשחק כדי לעדכן לגירסה הזאת (אפילו ללא חיבור לאינטרנט).
-{: .notice--info}
{% capture notice-1 %}
שימו לב שעדכונים מעותקים אלו כוללים בתוכם רק עדכונים לתכונות בסיסיות, כמו הגדרות מערכת, תפריט הבית, וכו'. עדכון דרך עותקים אלו לא יוכלו לעדכן תכונות ברשת, כמו System Transfer, דפדפן האינטרנט, Streetpass Mii Plaza, נגן המוזיקה או הeShop.
-
+
פירושו של דבר שעדכון עם משחק מגירסה עם נגן מוזיקה ישן *(<7.0.0 בשביל Old 3DS באזורים EUR, JPN, KOR, ו USA)* לגרסה עם נגן סאונד חדש ישבור את [Soundhax](homebrew-launcher-(soundhax))! אתם תצטרכו [method](homebrew-launcher-(alternatives)) דרך חלופית בשביל להכנס ל homebrew launcher!
+
+זאת אומרת שעדכונים אלו לא יוכלו להתקין דפדפן אם עדיין אין לכם אחד. זה יעדכן **רק** את הגרסאות מערכת עצמה *(לדוגמה, 2.1.0-0 -> 6.0.0.0)*. הספרה האחרונה *(ה 0-)* **לא** תשתנה.
{% endcapture %}
{{ notice-1 | markdownify }}
-זאת אומרת שעדכונים אלו לא יוכלו להתקין דפדפן אם עדיין אין לכם אחד. זה יעדכן **רק** את הגרסאות מערכת עצמה *(לדוגמה, 2.1.0-0 -> 6.0.0.0)*. הספרה האחרונה *(ה 0-)* **לא** תשתנה.
-{: .notice--warning}
-
**עדכון בעזרת משחק הכולל את גירסה 9.9.0 ומעלה ימחק את הדפדפן עד שעדכון אונליין סטנדרטי יבוצע!**
{: .notice--danger}
diff --git a/_pages/he_IL/credits.txt b/_pages/he_IL/credits.txt
index d4d0665f10..b06b29e688 100644
--- a/_pages/he_IL/credits.txt
+++ b/_pages/he_IL/credits.txt
@@ -9,7 +9,6 @@ title: "תודות"
{: .notice--primary}
אם שכחתי אתכם כאן, צור איתי קשר ואוסיף את שמכם.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/he_IL/f3-(linux).txt b/_pages/he_IL/f3-(linux).txt
index 41c08f30ee..879704bd50 100644
--- a/_pages/he_IL/f3-(linux).txt
+++ b/_pages/he_IL/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
זוהי הרחבה עבור בדיקת כרטיס הSD שלכם עבור שגיאות באמצעות F3.
-{: .notice--info}
תלוי בגודל של הSD ובמהירות של המחשב, תהליך זה יכול לקחת עד מספר שעות!
-{: .notice--info}
עמוד זה נועד רק עבור משתמשי לינוקס. אם אתם לא ב-לינוקס, תבדקו את העמודים [H2testw (windows)](h2testw-(windows)) או [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### מה אתם צריכים
diff --git a/_pages/he_IL/f3x-(mac).txt b/_pages/he_IL/f3x-(mac).txt
index fbe4bdeab8..f0d4a3db50 100644
--- a/_pages/he_IL/f3x-(mac).txt
+++ b/_pages/he_IL/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
זוהי הרחבה עבור בדיקת כרטיס הSD שלכם עבור שגיאות באמצעות F3X.
-{: .notice--info}
תלוי בגודל של הSD ובמהירות של המחשב, תהליך זה יכול לקחת עד מספר שעות!
-{: .notice--info}
עמוד זה נועד רק עבור משתמשי Mac. אם אתם לא ב- Mac, תבדקו את העמודים [H2testw (windows)](h2testw-(windows)) או [F3 ( Linux)](f3-(linux)).
-{: .notice--info}
#### מה אתם צריכים
diff --git a/_pages/he_IL/faq.txt b/_pages/he_IL/faq.txt
index 7b2dc3fb83..a5c6023932 100644
--- a/_pages/he_IL/faq.txt
+++ b/_pages/he_IL/faq.txt
@@ -6,52 +6,52 @@ title: "שאלות ותשובות"
**שאלה:** *אני בגרסאת מערכת האחרונה, האם אני יכול לפרוץ את הקונסולה שלי?*
**תשובה:** כן
-
+
**שאלה:** * איך אני מעדכן את Luma3DS?*
**תשובה:** תשתמש בLuma3DS Updater
-
+
**שאלה:** *אני שמעתי על משהו שאני צריך לקנות(Gateway, Sky3DS, וכו'), זה משהו שאני צריך?*
**תשובה:** לא. boot9strap היא שיטה יותר טובה של טעינת פריצה שעובדת מוקדם באתחול.
-
+
**שאלה:** *איך אני מעביר שמירות מכרטיס Gateway למשחקים מותקנים?*
**תשובה:** תסתכל [כאן](https://gbatemp.net/threads/425743/)
-
+
**שאלה:** *מה אני צריך בשביל המדריך הזה?*
**תשובה:** את המדריך הזה ניתן לסיים עם תוכנות חינמיות בלבד
-
+
**שאלה:** *כמה מסוכן זה לפרוץ את הקונסולה שלי?*
**תשובה:** תקלות במכשיר כרגע הן *די* בלתי אפשריות אלא אם אתה לא עושה/מדלג על כל בדיקות הבטיחות.
-
+
**שאלה:** *האם אני יכול להריץ תוכנות אדירות ואימולטורים עם זה?*
**תשובה:** כן! זה לא רק נותן לך גישה לHomebrew Launcher, זה גם נותן לך פריצה על כל הגרסאות, שזה אומר שתוכל לשמור את זה לתמיד, אפילו עם עדכונים.
-
+
**שאלה:** *האם אני יכול להשתמש בזה כדי לשחק במשחקים מאזורים אחרים?*
**תשובה:** Luma3DS תומך בביטול חסימת אזורים, שנותן למשתמשים להפעיל משחקים מכל אזור מבלי עוד שינויים או צעדים נוספים.
-
+
**שאלה:** *זה בטוח לעדכן את הCFW SysNAND?*
**תשובה:** כן. זה בטוח, תפסיקו לשאול לגבי זה.
-
+
**שאלה:** * לאן אני צריך להגיע בשביל תמיכה?*
**תשובה:** לקבלת תמיכה, תבקשו עזרה ב[Nintendo Homebrew על Discord](https://discord.gg/MWxPgEp).
-
+
**שאלה:** *אני יכול לעשות את זה עם כרטיס SD 4 ג׳יגה(או קטן יותר)?*
**תשובה:** כן!
-
+
**שאלה:** *האם אני יכול להשתמש בכרטיס SD 128 ג׳יגה(או גדול יותר)?*
**תשובה:** כן, אבל משתמשים מסויימים מדווחים על ירידות במהירות כאשר משתמשים בנפחים גדולים כאלו. שימו לב שאי אפשר לפרמט אותו עם exFAT; עליך לפרמט אותו באמצעות FAT32.
-
+
**שאלה:** *איך אני עובר לכרטיס SD בסוף המדריך?*
**תשובה:** פשוט תעתיק את כל הקבצים לכרטיס SD החדש.
-
+
**שאלה:** *האם אני יוכל להשאיר את הNNID שלי?*
**תשובה:** אם התחלת עם NNID ועקבת אחרי כל הצעדים, הNNID שלך ישאר בסוף.
-
+
**שאלה:** *מה לגבי System Transfer?*
**תשובה:** ברגע שתסיים את המדריך, תוכל לעשות System Transfer לקונסולה או מקונסולה עם B9S בדיוק כמו שעושים בקונסולה עם גירסה מקורית או EmuNAND (כל משחק/ערכת נושא/DLC ימחק בתהליך; שמירות ישארו גם למשחקים שנמחקו).
-
+
**שאלה:** *האם אני יכול לעשות את זה ללא מחשב (למשל עם מכשיר אנדרואיד)?*
**תשובה:** כל מה שאתה צריך זה את היכולת לשים קבצים על כרטיס SD!
-
+
**שאלה:** *תעזרו לי! משהו רע קרה ועכשיו הקונסולה לא פועלת...*
**תשובה:** תסתכל על [troubleshooting guide](troubleshooting).
diff --git a/_pages/he_IL/file-extensions-(windows).txt b/_pages/he_IL/file-extensions-(windows).txt
index b5526ccee1..4ce4fd9b15 100644
--- a/_pages/he_IL/file-extensions-(windows).txt
+++ b/_pages/he_IL/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "סיומות קבצים (Windows)"
---
זוהי הרחבה עבור כיבוי הגדרת ברירת המחדל של Windows להסתיר סיומות קבצים.
-{: .notice--info}
זה יקל עליכם למצוא את הקבצים בהמשך המדריך.
-{: .notice--info}
#### הוראות
diff --git a/_pages/he_IL/finalizing-setup.txt b/_pages/he_IL/finalizing-setup.txt
index b9d864f9ca..359108a592 100644
--- a/_pages/he_IL/finalizing-setup.txt
+++ b/_pages/he_IL/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "סיום התהליך"
#### מעבר על הצעדים
-{% capture notice-2 %}
הקובץ `boot.firm` הוא מה שמופעל בעת ההדלקה של המכשיר על ידי boot9strap עצמו לאחר שהוא נטען מה-NAND, והוא כל payload של arm9 בפורמט של הFIRM. את הקובץ עצמו אפשר להחליף תמיד, למרות שLuma3DS מאפשר הרצת payload של arm9 בפורמט הFIRM באמצעות הטעינת שרשרת של Luma3DS.
-
+
לכן, נשתמש ב-Luma3DS מאת [AuroraWright](https://github.com/AuroraWright/) על מנת לעשות בוט לתוך SysNAND מותאם ישירות, דבר אשר מאפשר לנו לעקוף לחלוטין כל צורך של EmuNAND ובכך לפשט את השימוש ב-3DS פרוץ במקביל לחסכון בנפח ה-SD.
-
+
בתהליך זה, גם נתקין את התוכנות הבאות:
+ **FBI** *(התקנת משחקים ותוכנות בפורמט CIA)*
@@ -18,10 +17,6 @@ title: "סיום התהליך"
+ **GodMode9** *(כלי רב שימושי אשר מסוגל לבצע פונקציות הקשורות ל-NAND ולקלטות משחק)*
+ **Homebrew Launcher Loader** *(מפעיל את הHomebrew Launcher כתוכנה רגילה תודות לRosalina)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### מה שאתם צריכים
* את הגרסה העדכנית של [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(יש להוריד את קובץ ה-`.cia`)*
@@ -134,8 +129,10 @@ title: "סיום התהליך"
___
{% capture notice-10 %}
-אתם כעת יכולים להשתמש ב-Luma3DS Updater על מנת לעדכן את Luma3DS המותקן לקונסולה שלכם בכך שפשוט תפתחו אותו ולחצו על (A).
+אתם כעת יכולים להשתמש ב-Luma3DS Updater על מנת לעדכן את Luma3DS המותקן לקונסולה שלכם בכך שפשוט תפתחו אותו ולחצו על (A).
+
זה לא אותו דבר כמו עדכון מערכת; זה רק מוריד ומחלץ את הקבצים העדכניים של Luma3DS.
+
זה יעדכן רק את הקבצים של Luma3DS בכרטיס SD. אם תדליקו את הקונסולה ללא SD, זה יפעיל את הגרסה אשר העתקתם לתוך מחיצת הCTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ ___
{% capture notice-6 %}
אתם עכשיו תפעילו את Luma3DS CFW כברירת מחדל.
+
אתם יכולים להחזיק את (Select) בזמן הדלקה על מנת להפעיל את תפריט ההגדרות של Luma3DS.
+
אתם יכולים עכשיו להחזיק (Start) בהפעלה כדי להפעיל את תפריט ההפעלה של Luma3DS (שימו לב שהוא יופיע רק אם יש לכם יותר מתוכנה אחת שזוהתה).
+
אתם יכולים עכשיו להחזיק (Start) + (Select) + (X) בהפעלה כדי להשיג את הOTP המיוחד לכל קונסולה (שהוא`OTP.bin`), הbootrom של ה ARM11 (שהוא`boot11.bin`), והbootrom של ה ARM9 (שהוא `boot9.bin`), בתיקיית `/boot9strap/` על כרטיס הSD שלכם (שימו לב שלא תהיה שום הודעה או סימן).
+
אתם יכולים עכשיו ללחוץ על (L) + (Down) + (Select) בזמן שהקונסולה פועלת כדי לפתוח את התפריט Rosalina שנמצא בתוך Luma3DS. לרשימה מלאה של הפיצ'רים של Rosalina בבקשה תראו את ה [שחרור של Luma3DS v8.0](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ ___
{% capture notice-7 %}
**תמחקו מה-SD שלכם את כל התיקיות והקבצים המיותרים אשר *לא* נמצאים בתמונה הבאה:**. אם יש לכם אותה, תשאירו את תיקיית `DCIM` כי היא כוללת תמונות שצולמו עם המצלמה של ה3DS:
-
+
{% endcapture %}
diff --git a/_pages/he_IL/flashing-ntrboot-(custom-firmware).txt b/_pages/he_IL/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..7e8476ec99
--- /dev/null
+++ b/_pages/he_IL/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "צריבת ntrboot (פריצה)"
+---
+
+לפני שאתם ממשיכים, שימו לב שקראתם את כל המידע ב [ntrboot](ntrboot)
+
+שימו לב שכרטיס הפריצה לא יעבוד למטרות הרגילות שלו בזמן שפירצת ntrboot מותקנת עליו. יש שלבים אופטימלים בסוף הוראות צריבת ntrboot כדי למחוק אותו מכרטיס הפריצה אחרי שסיימתם.
+{: .notice--warning}
+
+שימו לב שבמקרים נדירים, יתכן שתהליך הצריבה **ישבור** כרטיס פריצה מזוייף ויגרום לו לא לעבוד. זה לא סביר שייקרה, אבל בכל זאת רק כרטיסי פריצה מקוריים שמפורטים נתמכים. כדי להוריד את הסיכויים של להשיג כרטיס פריצה מזוייף, מומלץ להשתמש באתר אמין כדי לקנות את הכרטיס (כמו [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### מה שאתם צריכים
+
+* כרטיס הפריצה של DS \ DSi שלכם:
+ + או ה Acekard 2i או ה R4i Gold 3DS RTS
++ שתי קונסולות ממשפחת ה3DS
+ + **3DS המקור**: הקונסולה ממשפחת ה3DS שכבר מריצה סוג של פריצה (כמו boot9strap או arm9loaderhax)
+ + **3DS היעד**: הקונסולה על הקושחה המקורית
+* הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap של `ntr`; לא קובץ ה `devkit`)*
+* הגרסא העדכנית של [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### הוראות
+
+##### חלק I - הכנות
+
+1. תכבו את **קונסולת המקור**
+1. שימו את כרטיס הSD של **קונסולת המקור** במחשב שלכם
+1. תצרו ב-SD שלכם תיקייה חדשה בשם `ntrboot`
+1. תעתיקו את`boot9strap_ntr.firm` ואת `boot9strap_ntr.firm.sha` מה `.zip` של boot9strap NTR אל תיקיית `/ntrboot/`על כרטיס הSD שלכם
+1. תעתיקו את `ntrboot_flasher.firm` מה `.zip` של ntrboot_flasher אל תיקיית `/luma/payloads` על כרטיס הSD של **3DS המקור**
+1. תכניסו מחדש את כרטיס הSD של **3DS המקור** אל **3DS המקור**
+1. תכניסו את כרטיס הפריצה של DS \ DSi שתואם ntrboot אל **3DS המקור**
+
+##### חלק II - צריבת ntrboot
+
+1. תפעילו את תפריט הטעינה של Luma3DS על ידי זה שאתם מחזיקים (Start) בזמן הפעלת **3DS המקור**
+1. תבחרו ב "ntrboot_flasher"
+1. תבחרו ב "Dump Flash"
+1. תמתינו עד שהתהליך יושלם
+1. תלחצו (B) כדי לחזור לתפריט הראשי
+1. תבחרו ב "Inject Ntrboot"
+1. תלחצו (Y) כדי להמשיך
+1. תלחצו (R) בשביל ntrboot קמעוני
+1. תמתינו עד שהתהליך יושלם
+1. תלחצו (B) כדי לחזור לתפריט הראשי
+1. תבחרו "EXIT" כדי לכבות את **3DS המקור**
+
+___
+
+תמשיכו ל [התקנת boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/he_IL/flashing-ntrboot-(powersaves).txt b/_pages/he_IL/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..563db7ac74
--- /dev/null
+++ b/_pages/he_IL/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "צריבת ntrboot (Powersaves)"
+---
+
+הדרך הזאת לא הושלמה, ולכן זה רק עמוד ריק.
\ No newline at end of file
diff --git a/_pages/he_IL/get-started-(new-3ds).txt b/_pages/he_IL/get-started-(new-3ds).txt
index 4ce41d31c0..725174e5c7 100644
--- a/_pages/he_IL/get-started-(new-3ds).txt
+++ b/_pages/he_IL/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "צעדים ראשונים (New 3DS)"
---
-תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה.
-{: .notice--primary}
+תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה. שימו לב שכאשר נכתב "עד" מדובר בעד ועד בכלל. זה אומר, לדוגמה, שהשורה "מ 9.0.0 עד 9.2.0" כוללת את 9.0.0, 9.1.0 ואת 9.2.0.
-שימו לב שכאשר נכתב "עד" מדובר בעד ועד בכלל. זה אומר, לדוגמה, שהשורה "מ 9.0.0 עד 9.2.0" כוללת את 9.0.0, 9.1.0 ואת 9.2.0.
-{: .notice--info}
-
-שימו לב: המספר האחרון של גירסת הקונסולה (אשר לפניו מקף) מתייחס לגירסת הדפדפן שלכם. כרגע, גירסת הדפדפן לא רלוונטית בשביל New 3DS במדריך הזה.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. כרגע, גירסת הדפדפן לא רלוונטית בשביל New 3DS במדריך הזה.
עבור כל הגירסאות אתם יכולים לבצע [עדכון דרך משחק](cart-update) לגרסה גבוהה יותר באותה עמודה ולעקוב אחרי ההוראות ששם.
-{: .notice--info}
ניתן למצוא את גירסת המכשיר ואיזורו בפינה הימנית התחתונה של המסך העליון בהגדרות.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ title: "צעדים ראשונים (New 3DS)"
כל הגרסאות
|
- התקנת boot9strap (ntrboothax)
(דורש כרטיס פריצה תואם) או התקנת boot9strap (הלחמה)
(דורש הלחמה) |
+ ntrboot
(דורש כרטיס פריצה תואם) or התקנת boot9strap (Hardmod)
(דורש הלחמה) |
\ No newline at end of file
diff --git a/_pages/he_IL/get-started-(old-3ds).txt b/_pages/he_IL/get-started-(old-3ds).txt
index 8e72e3af13..8f1fcd1cc5 100644
--- a/_pages/he_IL/get-started-(old-3ds).txt
+++ b/_pages/he_IL/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "צעדים ראשונים (Old 3DS)"
---
-תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה.
-{: .notice--primary}
+תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה. שימו לב שכאשר נכתב "עד" מדובר בעד ועד בכלל. זה אומר, לדוגמה, שהשורה "מ 9.0.0 עד 9.2.0" כוללת את 9.0.0, 9.1.0 ואת 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). אם הגירסה היא 0 אז אין לכם דפדפן, בעוד שכל מספר אחר אומר שיש דפדפן מותקן.
-{% capture notice-1 %}
-שתי העמודות האחרונות של התרשים מתייחסות לספרה האחרונה במספר הגירסה שלכם (שתואמת לגירסת הדפדפן שמותקן על המערכת). אם הגירסה היא 0 אז אין לכם דפדפן, בעוד שכל מספר אחר אומר שיש דפדפן מותקן.
-
-כאשר נכתב "עד" מדובר בעד ועד בכלל. זה אומר, לדוגמה, שהשורה "מ 9.0.0 עד 9.2.0" כוללת את 9.0.0, 9.1.0 ואת 9.2.0.
-
במקרה של "5.0.0-0U" למשל, אתם צריכים לעקוב אחרי העמודה "ללא דפדפן" והשורה מ 5.0.0 עד 5.1.0 כי הקונסולה היא על גרסה בטווח הזה ואין לה דפדפן מותקן.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
עבור כל הגירסאות אתם יכולים לבצע [עדכון דרך משחק](cart-update) לגרסה גבוהה יותר באותה עמודה ולעקוב אחרי ההוראות ששם.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-שימו לב שעדכונים מעותקים אלו כוללים בתוכם רק עדכונים לתכונות בסיסיות, כמו הגדרות מערכת, תפריט הבית, וכו'. עדכון דרך עותקים אלו לא יוכלו לעדכן תכונות ברשת, כמו System Transfer, דפדפן האינטרנט, Streetpass Mii Plaza, נגן המוזיקה או הeShop.
-
-פירושו של דבר שעדכון עם משחק מגירסה עם נגן מוזיקה ישן *(<7.0.0 בשביל Old 3DS באזורים EUR, JPN, KOR, ו USA)* לגרסה עם נגן סאונד חדש ישבור את [Soundhax](homebrew-launcher-(soundhax))! אתם תצטרכו [method](homebrew-launcher-(alternatives)) דרך חלופית בשביל להכנס ל homebrew launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-אם עדכנתם עם משחק שמכיל את גרסת 9.9.0 או גרסה מעליה (כלומר יש לכם גירסה של 9.9.0 ומעלה, אבל הדפדפן שלכם הוא גרסה 25 או מתחת, כגון 10.2.0-24), הדפדפן שלכם הוסר ותצטרכו להשתמש בעמודה " ללא דפדפן".
-{: .notice--warning}
ניתן למצוא את גירסת המכשיר ואיזורו בפינה הימנית התחתונה של המסך העליון בהגדרות.
-{: .notice--success}
{: .notice--info}
+אם עדכנתם עם משחק שמכיל את גרסת 9.9.0 או גרסה מעליה (כלומר יש לכם גירסה של 9.9.0 ומעלה, אבל הדפדפן שלכם הוא גרסה 25 או מתחת, כגון 10.2.0-24), הדפדפן שלכם הוסר ותצטרכו להשתמש בעמודה " ללא דפדפן".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/he_IL/get-started.txt b/_pages/he_IL/get-started.txt
index 7b0892589a..323b3a73c5 100644
--- a/_pages/he_IL/get-started.txt
+++ b/_pages/he_IL/get-started.txt
@@ -2,23 +2,14 @@
title: "צעדים ראשונים"
---
-עמוד זה הוא בשביל הוראות על איך להתקין את boot9strap אל 3DS או 2DS *לא פרוץ*. אם יש לכם כבר את arm9loaderhax מותקן ואתם רוצים לעדכן לboot9strap, תעקבו אחרי [A9LH אל B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. הדף הזה יעזור לכם למצוא איפה להתחיל בשביל המכשיר שלכם.
-הצבעים של המכשיר בתמונה יכולים להיות שונים, אבל שימו לב למיקום הכפתורים והמאפיינים של כל מכשיר בקפידה כדי להבטיח שבחירתכם תהיה נכונה.
-{: .notice}
-
-לחצו על התמונה של המכשיר שלכם כדי ללכת לעמוד המתאים.
-{: .notice--primary}
-
-דגמים, גירסאות ואזורים שונים של המכשיר ידרשו צעדים שונים כדי לפרוץ עם boot9strap. הדף הזה יעזור לכם למצוא איפה להתחיל בשביל המכשיר שלכם.
-{: .notice--info}
+לחצו על התמונה של המכשיר שלכם כדי ללכת לעמוד המתאים. הצבעים של המכשיר בתמונה יכולים להיות שונים, אבל שימו לב למיקום הכפתורים והמאפיינים של כל מכשיר בקפידה כדי להבטיח שבחירתכם תהיה נכונה.
אם ה3DS שלכם פרוץ כבר עם EmuNAND, פשוט תעשו את הוראות בזמן שאתם בSysNAND. המידע שלכם יועבר מהEmuNAND לפריצת B9S לקראת הסוף.
-{: .notice--info}
-שימו לב שאפשר להגדיל את התמונות במדריך על ידי לחיצה עליהם.
-{: .notice--info}
+עמוד זה הוא בשביל הוראות על איך להתקין את boot9strap אל 3DS או 2DS *לא פרוץ*. אם יש לכם כבר את arm9loaderhax מותקן ואתם רוצים לעדכן לboot9strap, תעקבו אחרי [A9LH אל B9S](a9lh-to-b9s).
+{: .notice--primary}
לפני שמתחילים, משתמשי Windows צריכים להפעיל את האפשרות להצגת סיומות קבצים באמצעות [סיומות קבצים (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ title: "צעדים ראשונים"
לפני שאתם מתחילים, כדאי לבדוק את כרטיס הזכרון עבור שגיאות באמצעות [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), או [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-שימו לב שהדרכים של [ntrboothax](installing-boot9strap-(ntrboothax)) ושל [hardmod](installing-boot9strap-(hardmod)) עובדות על *כל הקונסולות, אזורים, וגרסאות*! זה כולל מכשירים מאזורים CHN וTWN שמקודם לא היו ניתנים לפריצה!
-{: .notice--success}
-
{% capture notice-1 %}
היו דיווחים על גל של באנים שנינטנדו נתנו למי שפרץ. כדי להגן על עצמכם, תעשו את השלבים הבאים לפני שאתם מתחילים את המדריך:
diff --git a/_pages/he_IL/godmode9-usage.txt b/_pages/he_IL/godmode9-usage.txt
index 6e9a2bd6ab..194cde75a2 100644
--- a/_pages/he_IL/godmode9-usage.txt
+++ b/_pages/he_IL/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "שימוש בGodMode9"
---
GodMode9 הוא מנהל קבצים עם גישה מלאה לקונסולת ה-3DS, שנותן לכם גישה לכרטיס SD, למחיצות הFAT בתוך הSysNAND והEmuNAND שלכם ובעצם לכל דבר אחר. ביחד עם פונקציות אחרות, אתם יכולים להתיק, למחוק, לשנות שם לקבצים וליצור תיקיות.
-{: .notice--primary}
שימו לב שאם יש לכם קבצי מטען אחרים מ`GodMode9.firm` בתיקיית `/luma/payloads/` על כרטיס הSD שלכם, החזקת (Start) בהפעלה תציג תפריט שבו תצטרכו להשתמש בחיצים ובכפתור ה(A) כדי לבחור ב"GodMode9" בשביל ההוראות האלה.
-{: .notice--info}
{% capture notice %}
זה כלי חזק, הוא נותן לכם את הדרך לעשות כל שינוי שניתן לחשוב עליו למידע המערכת שזמין על קונסולת ה3DS. עם זאת, אמצעי זהירות קיימים כדי שאתם לא תגרמו בטעות נזק לנתונים של הקונסולה שלכם.
-
+
מערכת ההרשאות של הכתיבה מגנה עליכם על ידי מתן אזהרות והיא כופה עליכם להזין רצף של כפתורים כדי לפתוח את הרשאות הכתיבה. זה בלתי אפשרי להחליף או לשנות שום דבר חשוב ללא רצפים כאלה וזה לא אפשרי לפתוח משהו בטעות. כמו תמיד, תהיו חכמים ותשמרו על קיבויים, רק כדי להיות בטוחים.
{% endcapture %}
diff --git a/_pages/he_IL/h2testw-(windows).txt b/_pages/he_IL/h2testw-(windows).txt
index 91544724c2..335d6fa08a 100644
--- a/_pages/he_IL/h2testw-(windows).txt
+++ b/_pages/he_IL/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
זוהי הרחבה עבור בדיקת כרטיס הSD שלכם עבור שגיאות באמצעות h2testw.
-{: .notice--info}
תלוי בגודל של הSD ובמהירות של המחשב, תהליך זה יכול לקחת מספר שעות!
-{: .notice--info}
הדף הזה הוא למשתמשי Windows בלבד. אם אתם לא על Windows, תבדקו את העמודים [F3 (linux)](f3-(linux)) או [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### מה אתם צריכים
diff --git a/_pages/he_IL/home.txt b/_pages/he_IL/home.txt
index 7caeac5358..84fd7868f9 100644
--- a/_pages/he_IL/home.txt
+++ b/_pages/he_IL/home.txt
@@ -37,7 +37,7 @@ excerpt: "מדריך שלם לפריצת 3DS,
מהחנות עד ל boot9s
**קושחה מותאמת אישית** ("CFW") מאפשרת לכם שליטה יותר מתקדמת ואפשרות להאקים מתקדמים ש- homebrew פשוט לא יכול להפעיל. לדוגמה, מוד של הקושחה מאפשר לכם להתקין משחקים, אפליקציות ו- homebrew לא חתומים.
-ניתן בקלות להגדיר CFW על כל קונסולה בגרסה 11.5.0 או נמוכה יותר.
+פריצה ניתן להתקין על כל קונסולה בכל גרסה (אבל זה יכול לדרוש עוד כלים\עזרים לגרסאות מעל 11.3.0).
## מה המדריך הזה מתקין?
diff --git a/_pages/he_IL/homebrew-launcher-(alternatives).txt b/_pages/he_IL/homebrew-launcher-(alternatives).txt
index 9a6f9873f1..9396190013 100644
--- a/_pages/he_IL/homebrew-launcher-(alternatives).txt
+++ b/_pages/he_IL/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (אלטרנטיבות)"
---
להומברו לאנצ'ר יש הרבה כניסות, והרבה דרכי הפעלה.
-{: .notice--info}
אם Browserhax הוא לא אופציה (תראו את הטבלה למטה), ואין לכם אחד המשחקים האלה כבר או מכשיר נוסף שיש לו גישה לHomebrew Launcher, האופציה הכי זולה היא לקנות עותק של [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (תוודאות שאתם קונים את העותק הנכון לגרסא שלכם) ומכשיר [Powersaves](https://amzn.to/2fb3VY7) (מתאים לכלל האיזורים), ואז לבחור בoot3dhax מהטבלה.
-{: .notice--info}
תבדקו שהWi-Fi של הקונסולה שלכם דלוק כי udsploit (שנדרש בעמוד הבא) ידרוש את התוכנה של הWi-Fi כדי לעבוד, ומספר מכשירים (הNew 3DS New 2DS, וה Old 2DS) לא יכולים להדליק את הWi-Fi מהHomebrew Launcher. הWi-Fi רק צריך לדלוק; לא צריך לחבר אותו לרשת אלחוטית.
-{: .notice--info}
#### מה נדרש
diff --git a/_pages/he_IL/homebrew-launcher-(soundhax).txt b/_pages/he_IL/homebrew-launcher-(soundhax).txt
index 7ff0b78053..18b410ec54 100644
--- a/_pages/he_IL/homebrew-launcher-(soundhax).txt
+++ b/_pages/he_IL/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
להומברו לאנצ'ר יש הרבה דרכי הפעלה.
-{: .notice--info}
SoundHax תומך בגירסאות 9.0.0 עד 11.3.0 באזורים EUR, JPN, KOR, וUSA.
-{: .notice--info}
תבדקו שהWi-Fi של הקונסולה שלכם דלוק כי udsploit (שנדרש בעמוד הבא) ידרוש את התוכנה של הWi-Fi כדי לעבוד, ומספר מכשירים (הNew 3DS New 2DS, וה Old 2DS) לא יכולים להדליק את הWi-Fi מהHomebrew Launcher. הWi-Fi רק צריך לדלוק; לא צריך לחבר אותו לרשת אלחוטית.
-{: .notice--info}
{% capture notice-1 %}
שימו לב שעדכונים מעותקים אלו כוללים בתוכם רק עדכונים לתכונות בסיסיות, כמו הגדרות מערכת, תפריט הבית, וכו'. עדכון דרך עותקים אלו לא יוכלו לעדכן תכונות ברשת, כמו System Transfer, דפדפן האינטרנט, Streetpass Mii Plaza, נגן המוזיקה או הeShop.
-
+
פירושו של דבר שעדכון עם משחק מגירסה עם נגן מוזיקה ישן *(<7.0.0 בשביל Old 3DS באזורים EUR, JPN, KOR, ו USA)* לגרסה עם נגן סאונד חדש ישבור את [Soundhax](homebrew-launcher-(soundhax))! אתם תצטרכו [method](homebrew-launcher-(alternatives)) דרך חלופית בשביל להכנס ל homebrew launcher!
{% endcapture %}
diff --git a/_pages/he_IL/installing-boot9strap-(browser).txt b/_pages/he_IL/installing-boot9strap-(browser).txt
index 953bb30d63..4a9dee9df3 100644
--- a/_pages/he_IL/installing-boot9strap-(browser).txt
+++ b/_pages/he_IL/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "התקנת boot9strap (דפדפן)"
---
אם המכשיר שלכם כבר פרוץ עם EmuNAND, המדריך הזה עוסק רק בSysNAND. תבצעו את ההוראות על SysNAND. Emunand וRednand כמעט מונחים נרדפים.
-{: .notice--info}
#### מה שאתם צריכים
diff --git a/_pages/he_IL/installing-boot9strap-(dsiware).txt b/_pages/he_IL/installing-boot9strap-(dsiware).txt
index e01cf11742..c28e0ce538 100644
--- a/_pages/he_IL/installing-boot9strap-(dsiware).txt
+++ b/_pages/he_IL/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "התקנת boot9strap (DSiWare)"
---
יש שתי שיטות שונות להתקנת boot9strap עם DSiWare על 11.5.0.
-{: .notice--info}
אחת מהשיטות רק עובדת עם 4 משחקים ספיציפים שלא נמכרים יותר בeShop, בעוד שהשניה עובדת עם לא מעט משחקים שעדיין נמכרים בeShop.
-{: .notice--info}
שתי השיטות דורשות שתי קונסולות. 3DS (או 2DS) אחד חייבים להריץ סוג כלשהו של פריצה (כמו boot9strap או arm9loaderhax) והם יקראו *קונסולת המקור* בעוד שה3DS (או ה3DS) השני הם על 11.5.0 והם יקראו *קונסולת היעד*.
-{: .notice--info}
-
-שתי הקונסולות חייבות להיות באותו אזור.
-{: .notice--warning}
שתי השיטות הללו יניחו שה3DS שמשתמש בפריצה מריץ boot9strap או arm9loaderhax והשלים את המדריך הזה. אפילו שאפשרי לעשות את השיטות האלו עם סוג כלשהו של פריצה ישנה יותר, זה מחוץ לטווח של המדריך הזה.
-{: .notice--info}
שתי השיטות האלו משתמשות בשילוב של הפירצה "FIRM partitions known-plaintext" שמדובר עליה [כאן](https://www.3dbrew.org/wiki/3DS_System_Flaws), וחולשה שמאפשרת לתוכנות DSiWare לקרוא ולכתוב לכל מקום בNAND המוצפן.
-{: .notice--info}
-{% capture notice-4 %}
שתי השיטות דורשות מכם לעשות [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) מה3DS הפרוץ ל3DS המקורי כחלק מהשלבים. System Transfer יעבוד *רק* בכיוונים הבאים:
+ New 3DS או New 2DS -> New 3DS או New 2DS
+ Old 3DS או Old 2DS -> Old 3DS או Old 2DS
- + Old 3DS או Old 2DS -> New 3DS או New 2DS
-{% endcapture %}
+ + Old 3DS או Old 2DS -> New 3DS או New 2DS
-{{ notice-4 | markdownify }}
+שתי הקונסולות חייבות להיות באותו אזור.
+{: .notice--warning}
-בשתי השיטות האלו, הNNID של קונסולת המקור יהיה תקוע בקונסולת היעד אלא אם כן אתם תעשו System Transfer בחזרה או תתקשרו לנינטנדו! (פרטים ניתן למצוא בהוראות)
-{: .notice--danger}
-
-ניתן לעשות System Transfer פעם אחת בשבוע לכל NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! ניתן לעשות System Transfer פעם אחת בשבוע לכל NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[התקנת boot9strap (הכנסת שמירת DSiWare)](installing-boot9strap-(dsiware-save-injection))
-
+
שיטה זו דורשת שלקונסולת המקור יהיה אחד מהמשחקים הבאים באופן חוקי:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ ___
{% capture notice-1 %}
[התקנת boot9strap (הכנסת משחק DSiWare)](installing-boot9strap-(dsiware-game-injection))
-
+
שיטה זאת דורשת שקונסולת המקור תקנה או שכבר יש לה אחד מהמשחקים ברשומים בדף [התקנת boot9strap (רשימת משחקי DSiWare שניתן להזריק)](installing-boot9strap-(dsiware-game-injection-list)).
-
+
עותק פיראטי של המשחק *לא* יעבוד.
{% endcapture %}
diff --git a/_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt b/_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt
index 9034ee1858..0fda12f9b4 100644
--- a/_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)"
---
שימו לב שאם יש לכם קבצי מטען אחרים מ`GodMode9.firm` בתיקיית `/luma/payloads/` על כרטיס הSD שלכם, החזקת (Start) בהפעלה תציג תפריט שבו תצטרכו להשתמש בחיצים ובכפתור ה(A) כדי לבחור ב"GodMode9" בשביל ההוראות האלה.
-{: .notice--info}
**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
לפני שתמשיכו, תבתקו שקראתם את כל ההודעות והאזהרות בעמוד [התקנת boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+אם אתם לא משתמשים ב`.firm` הנכון בשביל קונסולת היעד, תקבלו בריק! שימו לב שאתם מורידים ומשתמשים בקובץ הנכון!
{: .notice--danger}
#### מה שאתם צריכים
-* שתי קונסולות 3DS
- + **קונסולת המקור**: ה3DS שמריץ סוג כלשהוא של פריצה (כמו boot9strap או arm9loaderhax) *על הגרסא החדשה*
- + **קונסולת היעד**: ה3DS ללא פריצה *על 11.5*
++ שתי קונסולות ממשפחת ה3DS
+ + **3DS המקור**: הקונסולה שמריץ סוג כלשהוא של פריצה (כמו boot9strap או arm9loaderhax) *על הגרסא החדשה*
+ + **3DS היעד**: הקונסולה ללא פריצה *על 11.5*
**תקנו (או שכבר יש לכם) משחק DSiWare תואם מהeShop על **קונסולת המקור**
+ עותק פיראטי של המשחק **לא** יעבוד
לרשימה של משחקים תואמים, תראו את העמוד [התקנת boot9strap (רשימת משחקי DSiWare הניתן להזריק)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/he_IL/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/he_IL/installing-boot9strap-(dsiware-game-injection-list).txt
index a643f5a1bb..106bfafac3 100644
--- a/_pages/he_IL/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/he_IL/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "התקנת boot9strap (רשימת משחקי DSiWare הניתן להזר
---
זוהי רשימה שנוצרה אוטומטית של כל המשחקים שתואמים עם [התקנת boot9strap (DSiWare)](installing-boot9strap-(dsiware)).
-{: .notice--primary}
-הרשימה מסודרת לפי אזור בסדר USA ואז EUR ולבסוף JPN.
-{: .notice--info}
-
-כל קטע ממוין לפי מחיר בסדר עולה.
-{: .notice--info}
+הרשימה מסודרת לפי אזור בסדר USA ואז EUR ולבסוף JPN. כל קטע ממוין לפי מחיר בסדר עולה.
ניתן לסרוק קודי QR על-ידי לחיצה על (L + R) בתפריט הבית, לאחר מכן לחיצה על סמל הQR על המסך התחתון.
-{: .notice--info}
-הדרישות גודל הם כי ה DSiWare שמוזרק והשמירה שלו חייבים לא לשנות את גודלי הקבצים המתאימים שלהם כדי שיעברו בין ה3DSים כראוי, כלומר הDSiWare התורם חייב להיות גדול מספיק כדי להתאים ל DSiWare הפרוץ.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt b/_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt
index 559fb97da2..dd1e17255d 100644
--- a/_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "התקנת boot9strap (הזרקת שמירת DSiWare)"
---
שימו לב שאם יש לכם קבצי מטען אחרים מ`GodMode9.firm` בתיקיית `/luma/payloads/` על כרטיס הSD שלכם, החזקת (Start) בהפעלה תציג תפריט שבו תצטרכו להשתמש בחיצים ובכפתור ה(A) כדי לבחור ב"GodMode9" בשביל ההוראות האלה.
-{: .notice--info}
**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
לפני שתמשיכו, תבתקו שקראתם את כל ההודעות והאזהרות בעמוד [התקנת boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
אם אתם לא משתמשים ב`.firm` הנכון בשביל קונסולת היעד, תקבלו בריק! שימו לב שאתם מורידים ומשתמשים בקובץ הנכון!
{: .notice--danger}
#### מה שאתם צריכים
-* שתי קונסולות 3DS
- + **קונסולת המקור**: ה3DS שמריץ סוג כלשהוא של פריצה (כמו boot9strap או arm9loaderhax) *על הגרסא החדשה*
- + **קונסולת היעד**: ה3DS ללא פריצה *על 11.5*
++ שתי קונסולות ממשפחת ה3DS
+ + **3DS המקור**: הקונסולה שמריץ סוג כלשהוא של פריצה (כמו boot9strap או arm9loaderhax) *על הגרסא החדשה*
+ + **3DS היעד**: הקונסולה ללא פריצה *על 11.5*
* אחד ממשחקי הDSiWare הפריצים הבאים (עותק פיראטי של המשחק **לא** יעבוד) על **קונסולת המקור**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/he_IL/installing-boot9strap-(hardmod).txt b/_pages/he_IL/installing-boot9strap-(hardmod).txt
index 9f5b5a6ff7..b0e1d8baa1 100644
--- a/_pages/he_IL/installing-boot9strap-(hardmod).txt
+++ b/_pages/he_IL/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "התקנת boot9strap (הלחמה)"
---
מדריך מצוין לעשות את ההלחמה ניתן למצוא [כאן](https://gbatemp.net/threads/414498/). אם אתם על New 3DS, תקראו [את זה](https://github.com/Plailect/Guide/issues/681) ו [את זה](https://github.com/Plailect/Guide/issues/1185) לפני ההלחמה.
-{: .notice--info}
זה כרגע יישום עובד של הפירצה "PLAINTEXT ידוע למחיצת הFIRM" עם הסבר [כאן](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
זה יעבוד על New 3DS, Old 3DS, ו 2DS על *כל* הגרסאות שיש לכם קובץ `.firm` מתאים אליהן.
-{: .notice--success}
#### מה שאתם צריכים
diff --git a/_pages/he_IL/installing-boot9strap-(homebrew-launcher).txt b/_pages/he_IL/installing-boot9strap-(homebrew-launcher).txt
index c4f91e8454..32c0625e42 100644
--- a/_pages/he_IL/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/he_IL/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "התקנת boot9strap (Homebrew Launcher)"
---
אם המכשיר שלכם כבר פרוץ עם EmuNAND, המדריך הזה עוסק רק בSysNAND. תבצעו את ההוראות על SysNAND. Emunand וRednand כמעט מונחים נרדפים.
-{: .notice--info}
#### הוראות
@@ -20,6 +19,8 @@ title: "התקנת boot9strap (Homebrew Launcher)"
+ אם אתם *עדיין* מקבלים את השגיאה "PM INIT FAILED", תנסו להשתמש ב[גרסת r19 של safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ אם זה נקפא, כבו בכוח את המכשיר על-ידי החזקת כפתור ההדלקה ולאחר מכן נסו שוב
1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller
+ + אם אתם נכנסים לתפריט של Luma3DS במקום SafeB9SInstaller, תכבו את הקונסולה ותבדקו ש `safehaxpayload.bin` נמצא על הכרטיס זכרון שלכם
+ + אם הקובץ `safehaxpayload.bin` נמצא על הכרטיס זכרון שלכם, אבל אתם עדיין נכנסים לתפריט של Luma3DS, תבדקו [שהפעלתם את האופציה להראות סיומת קבצים](file-extensions-(windows))
#### חלק II - התקנת boot9strap
diff --git a/_pages/he_IL/installing-boot9strap-(mset).txt b/_pages/he_IL/installing-boot9strap-(mset).txt
index 284f72e9db..687ae86e0f 100644
--- a/_pages/he_IL/installing-boot9strap-(mset).txt
+++ b/_pages/he_IL/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "התקנת boot9strap (MSET)"
---
אם המכשיר שלכם כבר פרוץ עם EmuNAND, המדריך הזה עוסק רק בSysNAND. תבצעו את ההוראות על SysNAND. Emunand וRednand כמעט מונחים נרדפים.
-{: .notice--info}
#### מה שאתם צריכים
diff --git a/_pages/he_IL/installing-boot9strap-(ntrboot).txt b/_pages/he_IL/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..cf724e2d4b
--- /dev/null
+++ b/_pages/he_IL/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "התקנת boot9strap (ntrboot)"
+---
+
+#### מה שאתם צריכים
+
+* מגנט שמפעיל את מצב שינה בקונסולה שלכם (אם יש לכם קונסולה מתקפלת)
+* כרטיס הפריצה הצרוב שלכם
+* הגרסה העדכנית של [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)*
+* את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
+* את הכלים בשביל ה [Homebrew Launcher](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### הוראות
+
+##### חלק I - הכנות
+
+1. תכבו את המכשיר
+1. תכניסו את ה-SD שלכם למחשב
+1. תעתיקו את `SafeB9SInstaller.firm` אל שורש כרטיס ה SD שלכם ותשכתבו אותו אל `boot.firm`
+1. תפתחו את starter.zip, בתוך הקובץ יש קובץ boot.3dsx ותיקייה, חלצו את שניהם לתוך ה-SD שלכם. (מחוץ לכל תיקייה)
+1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap`
+1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם
+
+ 
+ {: .notice--info}
+
+1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
+1. תפעילו את המכשיר
+
+##### חלק II - ntrboot
+
+1. תשתמשו במגנט כדי לגלות את הנקודה בקונסולה שלכם שחיישן השינה נמצא בו
+ + השלב הזה לא נדרש על קונסולות לא מתקפלות (כגון ה old 2DS)
+1. תכבו את המכשיר
+1. תכניסו את כרטיס הפריצה שלכם לתוך הקונסולה שלכם
+1. תפעילו את הקונסולה, בזמן שהמגנט במקום שמפעיל את מצב שינה (או בזמן שהמתג של מצב השינה מופעל בקונסולות לא מתקפלות), בזמן שאתם מחזיקים (Start) + (Select) + (X)
+ + זה אולי יקח כמה נסיונות בגלל שהמיקום לא נוח
+1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller
+
+#### חלק III - התקנת boot9strap
+
+1. תחכו שכל בדיקות הבטיחות יסתיימו
+1. כאשר תתבקשו, תלחצו על הכפתורים שנתונים לכם כדי להתקין את boot9strap
+1. אחרי שזה סיים, תכפו על הקונסולה שלכם להתכבות על ידי זה שאתם מחזיקים את כפתור ההפעלה
+ + הקונסולה שלכם רק תגיע למסך של SafeB9SInstaller עד שהחלק הבא מושלם
+
+##### חלק IV - הגדרת Luma3DS
+
+1. תכניסו את ה-SD שלכם למחשב
+1. תמחקו את`boot.firm` מכרטיס הSD שלכם
+1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם
+1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
+1. תפעילו את המכשיר
+1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS
+ + אם אתם מקבלים מסך שחור, [עקבו אחרי המדריך הבא](troubleshooting#ts_sys_b9s)
+1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
+ + **"Show NAND or user string in System Settings"**
+1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
+ + אם אתם מקבלים שגיאה, פשוט תמשיכו בעמוד הבא
+
+___
+
+תמשיכו ל[סיום התהליך](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### חלק V - מחיקת ntrboot
+
+זהו חלק אופציונאלי שיאפשר לכם לשחזר את הכרטיס פריצה שלכם למצבו המקורי (כדי שתוכלו להשתמש בו כרגיל).
+{: .notice--info}
+
+אל תעקבו אחרי החלק הזה לפני שסיימתם את שאר ההוראות בעמוד הזה.
+{: .notice--warning}
+
+1. תפעילו את תפריט הטעינה של Luma3DS על ידי זה שאתם מחזיקים (Start) בזמן הפעלת **3DS המקור**
+1. תבחרו ב "ntrboot_flasher"
+1. תבחרו ב "Restore Flash"
+1. תלחצו (Y) כדי להמשיך
+1. תמתינו עד שהתהליך יושלם
+1. תלחצו (B) כדי לחזור לתפריט הראשי
+1. תבחרו "EXIT" כדי לכבות את **3DS המקור**
\ No newline at end of file
diff --git a/_pages/he_IL/move-emunand.txt b/_pages/he_IL/move-emunand.txt
index 716a422c66..ad869d8cf6 100644
--- a/_pages/he_IL/move-emunand.txt
+++ b/_pages/he_IL/move-emunand.txt
@@ -3,10 +3,8 @@ title: "הזזת EmuNAND"
---
זוהי הרחבה עבור העברת התכנים מהEmuNAND הישן שלכם ל CFW SysNAND חדש, ולאחר מכן הסרת הEmuNAND הישן. Emunand וRednand כמעט מונחים נרדפים.
-{: .notice--info}
-שימו לב שאם יש לכם קבצי מטען אחרים מ`GodMode9.firm` בתיקיית `/luma/payloads/` על כרטיס הSD שלכם, החזקת (Start) בהפעלה תציג תפריט שבו תצטרכו להשתמש בחיצים ובכפתור ה(A) כדי לבחור ב"GodMode9" בשביל ההוראות האלה.
-{: .notice--info}
+שימו לב שאם יש לכם קבצי מטען אחרים מ`GodMode9.firm` בתיקיית `/luma/payloads/` על כרטיס הSD שלכם, החזקת (Start) בהפעלה תציג תפריט שבו תצטרכו להשתמש בחיצים ובכפתור ה(A) כדי לבחור ב"GodMode9" בשביל ההוראות האלה.
**אתם חייבים שLuma3DS וboot9strap או arm9loaderhax יהיו מותקנים כדי להשתמש בזה**
{: .notice--danger}
diff --git a/_pages/he_IL/ntr-and-cubic-ninja.txt b/_pages/he_IL/ntr-and-cubic-ninja.txt
index f8f76b12fd..52aa3a7cd7 100644
--- a/_pages/he_IL/ntr-and-cubic-ninja.txt
+++ b/_pages/he_IL/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR ו- Cubic Ninja"
---
**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
-**NTR וCubic Ninja יעבדו רק בשביל New 3DS יפני!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### מה צריך
diff --git a/_pages/he_IL/ntrboot.txt b/_pages/he_IL/ntrboot.txt
new file mode 100644
index 0000000000..6c5efe8999
--- /dev/null
+++ b/_pages/he_IL/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+אם כבר צרבתם את ntrboot לכרטיס הפריצה שלכם, אתם יכולים לעקוב אחר [התקנת boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) להוראות השימוש.
+{: .notice--success}
+
+התקנת boot9strap עם ntrboot דורשת כרטיס פריצה DS / DSi תואם כדי לצרוב אליו את ntrboot. הרשימה הנוכחית של כרטיסי הפריצה התואמים היא כדקלמן:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+ישנן שתי דרכים שונות של צריבת ntrboot לכרטיס הפריצה שלכם.
+
+שתי הדרכים דורשות גישה למגנט קטן אם הקונסולה היא מהסוג שמתקפל (כל קונסולה ממשפחת ה3DS שהיא לא ה2DS הישן עם המתג של מצב השינה). זה בגלל שהפירצה דורשת שהקונסולה תהיה במצב שינה בזמן שיש לכם גישה לכפתורים.
+
+כדי לבדוק אם מגנט יעבוד, תחזיקו אותו על או באזור כפתורי ה(A)(B)(X)(Y) בזמן שהקונסולה עובדת כדי לראות האם הוא מפעיל את מצב שינה. אם הוא כן, שני המסכים יהיו שחורים כל עוד המגנט מוחזק במקום הזה.
+{: .notice--info}
+
+שימו לב שכרטיס הפריצה לא יעבוד למטרות הרגילות שלו בזמן שפירצת ntrboot מותקנת עליו. יש שלבים אופטימלים בסוף הוראות צריבת ntrboot כדי למחוק אותו מכרטיס הפריצה אחרי שסיימתם.
+
+שימו לב שבמקרים נדירים, יתכן שתהליך הצריבה **ישבור** כרטיס פריצה מזוייף ויגרום לו לא לעבוד. זה לא סביר שייקרה, אבל בכל זאת רק כרטיסי פריצה מקוריים שמפורטים נתמכים. כדי להוריד את הסיכויים של להשיג כרטיס פריצה מזוייף, מומלץ להשתמש באתר אמין כדי לקנות את הכרטיס (כמו [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[צריבת ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+הדרך הזאת דורשת גישה זמנים לקונסולה שנייה שכבר מריצה סוג של פריצה (כמו boot9strap או arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[צריבת ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+הדרך הזאת, כשתיהיה מוכנה, תדרוש גישה זמנית ל[Powersaves](https://amzn.to/2fb3VY7). הדרך הזאת לא הושלמה, ולכן היא רק עמוד ריק.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/he_IL/region-changing.txt b/_pages/he_IL/region-changing.txt
index b76fa1d114..2ff221153d 100644
--- a/_pages/he_IL/region-changing.txt
+++ b/_pages/he_IL/region-changing.txt
@@ -3,16 +3,12 @@ title: "שינוי אזור"
---
זוהי הרחבה עבור שינוי אזור הSysNAND CFW שלכם. זה נעשה על ידי התקנת ה9.2.0 CTRTransfer image לאיזור שאתם רוצים לשנות אליו.
-{: .notice--primary}
-** שינוי אזור מיותר כמעט לחלוטין כי Luma3DS תומכת בReigon Free ו [אמולצית אזור לכל משחק בנפרד] (https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). **
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
שימו לב שאם יש לכם קבצי מטען אחרים מ`GodMode9.firm` בתיקיית `/luma/payloads/` על כרטיס הSD שלכם, החזקת (Start) בהפעלה תציג תפריט שבו תצטרכו להשתמש בחיצים ובכפתור ה(A) כדי לבחור ב"GodMode9" בשביל ההוראות האלה.
-{: .notice--info}
תהליך זה ינתק את הNNID שלכם מהמערכת, כי הוא לא יהיה תואם איתה. NNID נעולים לאזור של המכשיר שבו יצרתם אותם, ולא ניתן להעביר בין אזורים ללא [תהליך מתקדם ומסובך מאוד](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ title: "שינוי אזור"
אחרי תהליך זה, רק ** New 3DS אשר מעולם לא נכנס אל הeShop לפני ** ו ** כל Old 3DS ** יוכלו לגשת לeShop אחרי יצירת NNID חדש על האזור החדש שלהם. New 3DS שכבר נכנס לEshop על האזור המקורי שלהם לא יכולים ליצור NNID חדש באזור החדש ולהיכנס שם לEshop!
{: .notice--warning}
-שימו לב שלעתים הeShop עדיין לא יעבוד לקונסולות ששם הוא צריך לעבוד. זה לגמרי קשור בשרתים של נינטנדו ואין לי שליטה על זה.
-{: .notice--warning}
-
-בדומה לאזהרה מעל, שימו לב שמידי פעם הeShop יעבוד באופן בלתי מוסבר עבור מכשירים שהוא לא אמור (לדוגמת הNew 3DS). הסיבה לכך היא כרגע לא ידועה.
-{: .notice--warning}
+שימו לב שלעתים הeShop עדיין לא יעבוד לקונסולות ששם הוא צריך לעבוד. זה לגמרי קשור בשרתים של נינטנדו ואין לי שליטה על זה. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). הסיבה לכך היא כרגע לא ידועה.
שינוי אזור עם CTRTransfer (שזו מה שהשיטה הזאת משתמשת) גורמת לתיקוני Reboot להישבר. הגורם לזה אינו ידוע, אך עבור בעלי Old 3DS לא תהיה אפשרות לפעיל משחקי HIMEM (כגון Monster Hunter, Super Smash Bros Pokémon Sun / Moon) עד שהם מפרמטים את המכשירים שלהם.
-{: .notice--warning}
-לעולם אל תבצעו פרמוט על New 2DS בגרסה נמוכה מ-11.4.0 כי לא תוכלו לסיים את ההגדרה הראשונית!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**אתם חייבים שLuma3DS וboot9strap או arm9loaderhax יהיו מותקנים כדי להשתמש בזה**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### מה אתם צריכים
@@ -86,7 +77,7 @@ title: "שינוי אזור"
1. תלחצו (A) כדי להמשיך
1. תלחצו (A) כדי לנעול הרשאות כתיבה
1. תלחצו על (Start) כדי לאתחל את המכשיר
- + If you get an error with "Process Title ID: 0x0004013000004202", hold (A) + (R) + (L) + (Up) while booting to update your system from Recovery Mode
+ + אם אתם מקבלים שגיאה עם "Process Title ID: 0x0004013000004202", תחזיקו (A) + (R) + (L) + (Up) בזמן שאתם מפעילים את הקונסולה כדי לעדכן אותה ממצב השחזור
1. עדכנו את המכשיר שלכם על ידי לחיצה על System Sttings, לאחר מכן "Other Settings", לכו ימינה עד הסוף ואז לחצו על "System Update"
+ עדכונים שתבצעו תוך שימוש ב-B9S+Luma (במידה שיש לכם את שניהם) הם בטוחים לחלוטין
+ אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
diff --git a/_pages/he_IL/site-navigation.txt b/_pages/he_IL/site-navigation.txt
index dec7798e2f..ad212d4313 100644
--- a/_pages/he_IL/site-navigation.txt
+++ b/_pages/he_IL/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [שאלות ותשובות](faq)
+ [סיומות קבצים (Windows)](file-extensions-(windows))
+ [סיום התהליך](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [צעדים ראשונים (New 3DS)](get-started-(new-3ds))
+ [צעדים ראשונים (Old 3DS)](get-started-(old-3ds))
+ [צעדים ראשונים](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [התקנת boot9strap (הלחמה)](installing-boot9strap-(hardmod))
+ [התקנת boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [התקנת boot9strap (MSET)](installing-boot9strap-(mset))
-+ [התקנת boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [הזזת EmuNAND](move-emunand)
+ [NTR ו- Cubic Ninja](ntr-and-cubic-ninja)
+ [שינוי אזור](region-changing)
diff --git a/_pages/he_IL/troubleshooting.txt b/_pages/he_IL/troubleshooting.txt
index 38dbc414dc..aacf2a1cf9 100644
--- a/_pages/he_IL/troubleshooting.txt
+++ b/_pages/he_IL/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "פתרון בעיות"
אם אתם לא מצליחים להפעיל את המכשיר שלכם, תחפשו את החלק הרלוונטי לכם ותעקבו אחרי ההוראות. אחרי שפתרון עבד לכם, תמשיכו עם המדריך הראשי
(הדף הזה ארוך למדי, השתמשו ב Ctrl + F כדי לחפש את הבעיה)
-{: .notice--primary}
-** אם אתם עדיין לא יכולים לפתור את הבעיה ואתם צריכים עזרה, בבקשה תדביקו את התוכן של כל קבצי ה- .log הרלוונטיים מה- SD אל תוך [Gist](https://gist.github.com/), ואז תבואו לעזרה מוכנים עם מידע רחב על הבעיה ומה ניסיתם.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
## DS / DSi לא מתפקד אחרי סיום המדריך
diff --git a/_pages/he_IL/uninstall-cfw.txt b/_pages/he_IL/uninstall-cfw.txt
index f7709f8811..52c4eaa9cf 100644
--- a/_pages/he_IL/uninstall-cfw.txt
+++ b/_pages/he_IL/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "הסרת CFW"
---
זה יסיר לחלוטין CFW מהקונסולה שלכם, כולל את Boot9Strap ואת Luma3DS, בשביל הפעולה של החזרת הקונסולה לאיך שהיא הגיעה.
-{: .notice--danger}
כל המשחקים הלא חתומים (פרוצים) יפסיקו לעבוד ותוכלו למחוק אותם ידנים בעזרת Data management בהגדרות. תשתמשו ב [מנהל שמירות](https://github.com/J-D-K/JKSM/releases/latest) כדי לגבות את כל השמירות בשביל משחקים לא חצומים (פרוצים) שאכפת לכם מהם.
-{: .notice--info}
זה לא ישפיע על הNNID שלכם, כל המשחקים הקנויים חוקית, או השמירות שלהם.
-{: .notice--info}
שימו לב שאם יש לכם קבצי מטען אחרים מ`GodMode9.firm` בתיקיית `/luma/payloads/` על כרטיס הSD שלכם, החזקת (Start) בהפעלה תציג תפריט שבו תצטרכו להשתמש בחיצים ובכפתור ה(A) כדי לבחור ב"GodMode9" בשביל ההוראות האלה.
-{: .notice--info}
#### מה שאתם צריכים
diff --git a/_pages/he_IL/updating-b9s.txt b/_pages/he_IL/updating-b9s.txt
index bb6796d4bb..dda45b678c 100644
--- a/_pages/he_IL/updating-b9s.txt
+++ b/_pages/he_IL/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "עדכון B9S"
---
העמוד הזה קיים בשביל משתמשי boot9strap קיימים כדי לעדכן את ההתקנה שלהם לגרסה הכי חדשה.
-{: .notice--info}
שימו לב שהגרסה הגדולה החדשה של Luma3DS *לא* תומכת בboot9strap גרסה 1.0. היא *דורשת* מכם לעדכן את התקנת boot9strap שלכם לגרסה 1.2 על ידי עקיבת ההוראות בעמוד זה.
-{: .notice--warning}
{% capture notice-1 %}
היו דיווחים על גל של באנים שנינטנדו נתנו למי שפרץ. כדי להגן על עצמכם, תעשו את השלבים הבאים לפני שאתם מתחילים את המדריך:
diff --git a/_pages/hu_HU/9.2.0-ctrtransfer.txt b/_pages/hu_HU/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/hu_HU/9.2.0-ctrtransfer.txt
+++ b/_pages/hu_HU/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/hu_HU/a9lh-to-b9s.txt b/_pages/hu_HU/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/hu_HU/a9lh-to-b9s.txt
+++ b/_pages/hu_HU/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/hu_HU/cart-update.txt b/_pages/hu_HU/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/hu_HU/cart-update.txt
+++ b/_pages/hu_HU/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/hu_HU/credits.txt b/_pages/hu_HU/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/hu_HU/credits.txt
+++ b/_pages/hu_HU/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/hu_HU/f3-(linux).txt b/_pages/hu_HU/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/hu_HU/f3-(linux).txt
+++ b/_pages/hu_HU/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/hu_HU/f3x-(mac).txt b/_pages/hu_HU/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/hu_HU/f3x-(mac).txt
+++ b/_pages/hu_HU/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/hu_HU/faq.txt b/_pages/hu_HU/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/hu_HU/faq.txt
+++ b/_pages/hu_HU/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/hu_HU/file-extensions-(windows).txt b/_pages/hu_HU/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/hu_HU/file-extensions-(windows).txt
+++ b/_pages/hu_HU/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/hu_HU/finalizing-setup.txt b/_pages/hu_HU/finalizing-setup.txt
index f959c138cf..e462ce4bfe 100644
--- a/_pages/hu_HU/finalizing-setup.txt
+++ b/_pages/hu_HU/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Overview of steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/hu_HU/flashing-ntrboot-(custom-firmware).txt b/_pages/hu_HU/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/hu_HU/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/hu_HU/flashing-ntrboot-(powersaves).txt b/_pages/hu_HU/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/hu_HU/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/hu_HU/get-started-(new-3ds).txt b/_pages/hu_HU/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/hu_HU/get-started-(new-3ds).txt
+++ b/_pages/hu_HU/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/hu_HU/get-started-(old-3ds).txt b/_pages/hu_HU/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/hu_HU/get-started-(old-3ds).txt
+++ b/_pages/hu_HU/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/hu_HU/get-started.txt b/_pages/hu_HU/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/hu_HU/get-started.txt
+++ b/_pages/hu_HU/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/hu_HU/godmode9-usage.txt b/_pages/hu_HU/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/hu_HU/godmode9-usage.txt
+++ b/_pages/hu_HU/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/hu_HU/h2testw-(windows).txt b/_pages/hu_HU/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/hu_HU/h2testw-(windows).txt
+++ b/_pages/hu_HU/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/hu_HU/home.txt b/_pages/hu_HU/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/hu_HU/home.txt
+++ b/_pages/hu_HU/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/hu_HU/homebrew-launcher-(alternatives).txt b/_pages/hu_HU/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/hu_HU/homebrew-launcher-(alternatives).txt
+++ b/_pages/hu_HU/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/hu_HU/homebrew-launcher-(soundhax).txt b/_pages/hu_HU/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/hu_HU/homebrew-launcher-(soundhax).txt
+++ b/_pages/hu_HU/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/hu_HU/installing-boot9strap-(browser).txt b/_pages/hu_HU/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/hu_HU/installing-boot9strap-(browser).txt
+++ b/_pages/hu_HU/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/hu_HU/installing-boot9strap-(dsiware).txt b/_pages/hu_HU/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/hu_HU/installing-boot9strap-(dsiware).txt
+++ b/_pages/hu_HU/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/hu_HU/installing-boot9strap-(dsiware-game-injection).txt b/_pages/hu_HU/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/hu_HU/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/hu_HU/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/hu_HU/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/hu_HU/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/hu_HU/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/hu_HU/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/hu_HU/installing-boot9strap-(dsiware-save-injection).txt b/_pages/hu_HU/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/hu_HU/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/hu_HU/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/hu_HU/installing-boot9strap-(hardmod).txt b/_pages/hu_HU/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/hu_HU/installing-boot9strap-(hardmod).txt
+++ b/_pages/hu_HU/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/hu_HU/installing-boot9strap-(homebrew-launcher).txt b/_pages/hu_HU/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/hu_HU/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/hu_HU/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/hu_HU/installing-boot9strap-(mset).txt b/_pages/hu_HU/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/hu_HU/installing-boot9strap-(mset).txt
+++ b/_pages/hu_HU/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/hu_HU/move-emunand.txt b/_pages/hu_HU/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/hu_HU/move-emunand.txt
+++ b/_pages/hu_HU/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/hu_HU/ntr-and-cubic-ninja.txt b/_pages/hu_HU/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/hu_HU/ntr-and-cubic-ninja.txt
+++ b/_pages/hu_HU/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/hu_HU/ntrboot.txt b/_pages/hu_HU/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/hu_HU/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/hu_HU/region-changing.txt b/_pages/hu_HU/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/hu_HU/region-changing.txt
+++ b/_pages/hu_HU/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/hu_HU/site-navigation.txt b/_pages/hu_HU/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/hu_HU/site-navigation.txt
+++ b/_pages/hu_HU/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/hu_HU/troubleshooting.txt b/_pages/hu_HU/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/hu_HU/troubleshooting.txt
+++ b/_pages/hu_HU/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/hu_HU/uninstall-cfw.txt b/_pages/hu_HU/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/hu_HU/uninstall-cfw.txt
+++ b/_pages/hu_HU/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/hu_HU/updating-b9s.txt b/_pages/hu_HU/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/hu_HU/updating-b9s.txt
+++ b/_pages/hu_HU/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/id_ID/9.2.0-ctrtransfer.txt b/_pages/id_ID/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/id_ID/9.2.0-ctrtransfer.txt
+++ b/_pages/id_ID/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/id_ID/a9lh-to-b9s.txt b/_pages/id_ID/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/id_ID/a9lh-to-b9s.txt
+++ b/_pages/id_ID/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/id_ID/cart-update.txt b/_pages/id_ID/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/id_ID/cart-update.txt
+++ b/_pages/id_ID/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/id_ID/credits.txt b/_pages/id_ID/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/id_ID/credits.txt
+++ b/_pages/id_ID/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/id_ID/f3-(linux).txt b/_pages/id_ID/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/id_ID/f3-(linux).txt
+++ b/_pages/id_ID/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/id_ID/f3x-(mac).txt b/_pages/id_ID/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/id_ID/f3x-(mac).txt
+++ b/_pages/id_ID/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/id_ID/faq.txt b/_pages/id_ID/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/id_ID/faq.txt
+++ b/_pages/id_ID/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/id_ID/file-extensions-(windows).txt b/_pages/id_ID/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/id_ID/file-extensions-(windows).txt
+++ b/_pages/id_ID/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/id_ID/finalizing-setup.txt b/_pages/id_ID/finalizing-setup.txt
index f959c138cf..e462ce4bfe 100644
--- a/_pages/id_ID/finalizing-setup.txt
+++ b/_pages/id_ID/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Overview of steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/id_ID/flashing-ntrboot-(custom-firmware).txt b/_pages/id_ID/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/id_ID/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/id_ID/flashing-ntrboot-(powersaves).txt b/_pages/id_ID/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/id_ID/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/id_ID/get-started-(new-3ds).txt b/_pages/id_ID/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/id_ID/get-started-(new-3ds).txt
+++ b/_pages/id_ID/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/id_ID/get-started-(old-3ds).txt b/_pages/id_ID/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/id_ID/get-started-(old-3ds).txt
+++ b/_pages/id_ID/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/id_ID/get-started.txt b/_pages/id_ID/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/id_ID/get-started.txt
+++ b/_pages/id_ID/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/id_ID/godmode9-usage.txt b/_pages/id_ID/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/id_ID/godmode9-usage.txt
+++ b/_pages/id_ID/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/id_ID/h2testw-(windows).txt b/_pages/id_ID/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/id_ID/h2testw-(windows).txt
+++ b/_pages/id_ID/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/id_ID/home.txt b/_pages/id_ID/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/id_ID/home.txt
+++ b/_pages/id_ID/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/id_ID/homebrew-launcher-(alternatives).txt b/_pages/id_ID/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/id_ID/homebrew-launcher-(alternatives).txt
+++ b/_pages/id_ID/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/id_ID/homebrew-launcher-(soundhax).txt b/_pages/id_ID/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/id_ID/homebrew-launcher-(soundhax).txt
+++ b/_pages/id_ID/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/id_ID/installing-boot9strap-(browser).txt b/_pages/id_ID/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/id_ID/installing-boot9strap-(browser).txt
+++ b/_pages/id_ID/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/id_ID/installing-boot9strap-(dsiware).txt b/_pages/id_ID/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/id_ID/installing-boot9strap-(dsiware).txt
+++ b/_pages/id_ID/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/id_ID/installing-boot9strap-(dsiware-game-injection).txt b/_pages/id_ID/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/id_ID/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/id_ID/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/id_ID/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/id_ID/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/id_ID/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/id_ID/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/id_ID/installing-boot9strap-(dsiware-save-injection).txt b/_pages/id_ID/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/id_ID/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/id_ID/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/id_ID/installing-boot9strap-(hardmod).txt b/_pages/id_ID/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/id_ID/installing-boot9strap-(hardmod).txt
+++ b/_pages/id_ID/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/id_ID/installing-boot9strap-(homebrew-launcher).txt b/_pages/id_ID/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/id_ID/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/id_ID/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/id_ID/installing-boot9strap-(mset).txt b/_pages/id_ID/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/id_ID/installing-boot9strap-(mset).txt
+++ b/_pages/id_ID/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/id_ID/installing-boot9strap-(ntrboot).txt b/_pages/id_ID/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/id_ID/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/id_ID/move-emunand.txt b/_pages/id_ID/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/id_ID/move-emunand.txt
+++ b/_pages/id_ID/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/id_ID/ntr-and-cubic-ninja.txt b/_pages/id_ID/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/id_ID/ntr-and-cubic-ninja.txt
+++ b/_pages/id_ID/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/id_ID/ntrboot.txt b/_pages/id_ID/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/id_ID/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/id_ID/region-changing.txt b/_pages/id_ID/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/id_ID/region-changing.txt
+++ b/_pages/id_ID/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/id_ID/site-navigation.txt b/_pages/id_ID/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/id_ID/site-navigation.txt
+++ b/_pages/id_ID/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/id_ID/troubleshooting.txt b/_pages/id_ID/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/id_ID/troubleshooting.txt
+++ b/_pages/id_ID/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/id_ID/uninstall-cfw.txt b/_pages/id_ID/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/id_ID/uninstall-cfw.txt
+++ b/_pages/id_ID/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/id_ID/updating-b9s.txt b/_pages/id_ID/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/id_ID/updating-b9s.txt
+++ b/_pages/id_ID/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/it_IT/9.2.0-ctrtransfer.txt b/_pages/it_IT/9.2.0-ctrtransfer.txt
index 521a0f23ca..2bb0e50f5f 100644
--- a/_pages/it_IT/9.2.0-ctrtransfer.txt
+++ b/_pages/it_IT/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "CTRTransfer 9.2.0"
---
In questa sezione aggiuntiva verrà spiegato come installare un'immagine CTRTransfer 9.2.0 sulla tua console.
-{: .notice--primary}
**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella cartella `/luma/payloads/` della tua scheda SD, per seguire le istruzioni riportate dovrai avviare la console tenendo (Start); apparirà un "menu chainloader" dove dovrai selezionare "GodMode9" tramite il D-Pad e il pulsante (A).
-{: .notice--info}
Non formattare mai un New 2DS se sei ad una versione del software <11.4.0 altrimenti non potrai più completare l'installazione iniziale!
{: .notice--danger}
diff --git a/_pages/it_IT/a9lh-to-b9s.txt b/_pages/it_IT/a9lh-to-b9s.txt
index 546d30feb5..f3169f8e21 100644
--- a/_pages/it_IT/a9lh-to-b9s.txt
+++ b/_pages/it_IT/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "Da A9LH a B9S"
---
Questa sezione serve agli utenti di arm9loaderhax che vogliono aggiornare le proprie console a boot9strap.
-{: .notice--info}
Tutte le future versioni di Luma3DS verranno rilasciate in formato `.firm`, compatibile soltanto con boot9strap e sighax. Quindi, per poter ricevere gli aggiornamenti di Luma3DS dovresti seguire le istruzioni indicate in questa sezione per aggiornare la tua installazione.
-{: .notice--info}
+
+**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
Se Luma3DS è configurato con un PIN di accesso, SafeB9SInstaller ti darà l'errore "OTP Crypto Fail" finché non lo avrai disabilitato (lo puoi riattivare dopo l'aggiornamento).
{: .notice--warning}
-**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
-
{% capture notice-1 %}
È stata segnalata recentemente un'ondata di ban da parte di Nintendo riscontrata da utenti con CFW. Per proteggerti, per favore esegui i seguenti passaggi prima di iniziare questa guida:
diff --git a/_pages/it_IT/cart-update.txt b/_pages/it_IT/cart-update.txt
index bfa138a9ba..46a915e0ff 100644
--- a/_pages/it_IT/cart-update.txt
+++ b/_pages/it_IT/cart-update.txt
@@ -3,20 +3,18 @@ title: "Aggiornamento con scheda di gioco"
---
Tutte le schede di gioco includono al loro interno una copia della versione di sistema richiesta per il suo funzionamento, permettendo a chiunque si trovi ad una vecchia versione di sistema di usare la scheda di gioco per aggiornare a quella versione (anche senza una connessione ad internet).
-{: .notice--info}
{% capture notice-1 %}
Tieni presente che tramite scheda di gioco vengono aggiornate solamente le applicazioni principali del sistema, come le Impostazioni della console, il menu HOME, ecc. Non vengono invece aggiornate le funzionalità come Sound Nintendo 3DS o le funzionalità che necessitano di Internet, come ad esempio il Trasferimento dati, il Browser Internet, la Piazza Mii StreetPass o l'eShop.
-
+
Ciò significa che se aggiornate con una scheda di gioco da una versione avente una versione di Sound Nintendo 3DS obsoleta *(<7.0.0 per Old 3DS EUR, USA, JAP e KOR)* ad una versione con la stessa applicazione aggiornata, [Soundhax](homebrew-launcher-(soundhax)) non funzionerà! Dovrai utilizzare un [metodo alternativo](homebrew-launcher-(alternatives)) per avviare l'Homebrew Launcher!
+
+Ciò significa anche che un aggiornamento con scheda di gioco NON installerà un browser se non ne hai già uno. Aggiornerà **solamente** la versione di sistema *(ad esempio, 2.1.0-0 -> 6.0.0-0)*. L'ultimo numero *(lo -0)* *non* cambierà.
{% endcapture %}
{{ notice-1 | markdownify }}
-Ciò significa anche che un aggiornamento con scheda di gioco NON installerà un browser se non ne hai già uno. Aggiornerà **solamente** la versione di sistema *(ad esempio, 2.1.0-0 -> 6.0.0-0)*. L'ultimo numero *(lo -0)* *non* cambierà.
-{: .notice--warning}
-
**Un aggiornamento con una scheda di gioco contente la versione di sistema 9.9.0 o superiore rimuoverà il tuo browser internet, che dovrà essere ripristinato effettuando un normale aggiornamento online**
{: .notice--danger}
diff --git a/_pages/it_IT/credits.txt b/_pages/it_IT/credits.txt
index 9b659cf792..092e9ebbc2 100644
--- a/_pages/it_IT/credits.txt
+++ b/_pages/it_IT/credits.txt
@@ -9,7 +9,6 @@ title: "Riconoscimenti"
{: .notice--primary}
Se ho dimenticato di inserirti in questa lista, contattami e ti aggiungerò.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/it_IT/f3-(linux).txt b/_pages/it_IT/f3-(linux).txt
index cf918a8e24..6d66ab5a1f 100644
--- a/_pages/it_IT/f3-(linux).txt
+++ b/_pages/it_IT/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
In questa sezione aggiuntiva verrà spiegato come verificare la presenza di errori nella tua scheda SD utilizzando F3.
-{: .notice--info}
A seconda delle dimensioni della tua scheda SD e della velocità del tuo computer, questo procedimento può durare diverse ore!
-{: .notice--info}
Questa pagina è solo per utenti Linux. Se non sei su Linux, usa [H2testw (windows)](h2testw-(windows)) o [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Cosa serve
diff --git a/_pages/it_IT/f3x-(mac).txt b/_pages/it_IT/f3x-(mac).txt
index 4d4c26566f..a3f2e10001 100644
--- a/_pages/it_IT/f3x-(mac).txt
+++ b/_pages/it_IT/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
In questa sezione aggiuntiva verrà spiegato come verificare la presenza di errori nella tua scheda SD utilizzando F3X.
-{: .notice--info}
A seconda delle dimensioni della tua scheda SD e della velocità del tuo computer, questo procedimento può durare diverse ore!
-{: .notice--info}
Questa pagina è solo per utenti Mac. Se non sei su Mac, usa [H2testw (windows)](h2testw-(windows)) o [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### Cosa serve
diff --git a/_pages/it_IT/faq.txt b/_pages/it_IT/faq.txt
index dfb504aa03..51a181ed0d 100644
--- a/_pages/it_IT/faq.txt
+++ b/_pages/it_IT/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**D:** *Ho installato l'ultima versione di sistema, posso comunque installare un custom firmware?*
**R:** Sì
-
+
**D:** *Come aggiorno Luma3DS?*
**R:** Usa Luma3DS Updater
-
+
**D:** *Ho sentito di questa cosa per cui dovrei pagare (Gateway, Sky3DS, ecc), è qualcosa che mi serve?*
**R:** No. boot9strap permette il caricamento di file prima ancora dell’avvio del sistema.
-
+
**D:** *Come faccio a spostare i salvataggi da un setup Gateway esistente ai giochi installati nella console?*
**R:** Guarda [qui](https://gbatemp.net/threads/425743/)
-
+
**D:** *Di cosa ho bisogno per seguire questa guida?*
**R:** Questa guida può essere completata utilizzando esclusivamente software gratuiti
-
+
**D:** *Quanto è rischioso modificare la mia console?*
**R:** Allo stato attuale è *praticamente impossibile* brickare la console a meno di ignorare volontariamente tutte le misure di sicurezza.
-
+
**D:** *Potrò avviare emulatori ed homebrew fantastici al termine della guida?*
**R:** Sì! Un Custom Firmware non solo ti permette di avviare l'Homebrew Launcher, ma le funzionalità aggiuntive permangono anche dopo un aggiornamento di sistema.
-
+
**D:** *Potrò giocare a giochi comprati all'estero?*
**R:** Luma3DS supporta le patch Region Free, che permettono agli utenti di installare e giocare senza problemi a giochi provenienti da altre parti del mondo.
-
+
**D:** *È sicuro aggiornare un CFW SysNAND?*
**R:** Sì. È sicuro, e ora basta chiederlo.
-
+
**D:** *Dove posso andare se dovessi aver bisogno di ulteriore supporto?*
**R:** Se hai bisogno di aiuto, chiedi pure su [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp) (in inglese).
-
+
**D:** *Posso utilizzare una scheda SD da 4GB (o minore)?*
**R:** Sì!
-
+
**D:** *Posso utilizzare una scheda SD da 128GB (o maggiore)?*
**R:** Sì, ma alcuni utenti hanno segnalato rallentamenti con schede di dimensioni così elevate. Ricorda anche che non puoi formattare la scheda in exFAT; devi formattarla in FAT32.
-
+
**D:** *Come posso passare a una nuova scheda SD al termine della guida?*
**R:** Copia semplicemente tutti i file sulla nuova scheda SD.
-
+
**D:** *Posso mantenere il mio NNID?*
**R:** Se parti con un NNID assegnato e segui correttamente ogni passaggio, al termine della guida avrai mantenuto il tuo NNID originale.
-
+
**D:** *Posso eseguire un Trasferimento dati?*
**R:** Una volta completata la guida, potrai effettuare un Trasferimento dati da e verso un 3DS o 2DS con B9S esattamente come lo avresti fatto con una console normale o con EmuNAND (perderai tutti i giochi/temi/DLC installati illegalmente; i salvataggi verranno però mantenuti anche se i giochi verranno cancellati).
-
+
**D:** *Posso seguire questa guida senza un computer a disposizione (ad esempio, da un telefono Android)?*
**R:** Sì, a patto che tu abbia modo di trasferire file sulla scheda SD!
-
+
**D:** *Aiuto! È successo qualcosa di brutto e ora la console non si avvia più...*
**R:** Consulta la sezione [Risoluzione dei problemi](troubleshooting).
diff --git a/_pages/it_IT/file-extensions-(windows).txt b/_pages/it_IT/file-extensions-(windows).txt
index 3722dbb777..e581aacfd0 100644
--- a/_pages/it_IT/file-extensions-(windows).txt
+++ b/_pages/it_IT/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "Estensioni dei file (Windows)"
---
In questa sezione aggiuntiva verrà spiegato come modificare l'impostazione di default di Windows relativa alla visualizzazione delle estensioni dei file.
-{: .notice--info}
Ciò renderà più facile cercare i file citati nel resto della guida.
-{: .notice--info}
#### Istruzioni
diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt
index 71f8cc6f63..5502423ab9 100644
--- a/_pages/it_IT/finalizing-setup.txt
+++ b/_pages/it_IT/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Completamento dell'installazione"
#### Panoramica
-{% capture notice-2 %}
Il file `boot.firm` viene lanciato da boot9strap stesso al termine del caricamento dalla NAND, e può essere un qualunque payload arm9 valido in formato FIRM. Questo file può essere sostituito in qualunque momento, tuttavia Luma3DS permette il lancio di diversi payload arm9 in formato FIRM grazie al chainloader di Luma3DS.
-
+
In questo caso, useremo Luma3DS di [AuroraWright](https://github.com/AuroraWright/) per avviare direttamente una SysNAND patchata, bypassando del tutto il bisogno di una EmuNAND. Questo semplifica l'uso di un 3DS così modificato, e permette di risparmiare spazio sulla scheda SD.
-
+
Durante la guida verranno anche configurate le seguenti applicazioni:
+ **FBI** *(installa i giochi e le applicazioni in formato CIA)*
@@ -18,10 +17,6 @@ Durante la guida verranno anche configurate le seguenti applicazioni:
+ **GodMode9** *(applicazione multifunzione per gestire NAND e schede di gioco)*
+ **Homebrew Launcher Loader** *(avvia l'Homebrew Launcher come fosse una normale applicazione grazie alla magia di Rosalina)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Cosa serve
* L'ultima versione di [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(il file `.cia`)*
@@ -134,8 +129,10 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
___
{% capture notice-10 %}
-Ora puoi usare Luma3DS Updater per aggiornare Luma3DS all'ultima versione disponibile. Devi solo aprire l'applicazione e premere (A).
+Ora puoi usare Luma3DS Updater per aggiornare Luma3DS all'ultima versione disponibile. Devi solo aprire l'applicazione e premere (A).
+
Questa operazione non è un aggiornamento della versione del software della console; serve solamente a scaricare ed estrarre automaticamente i file più recenti di Luma3DS.
+
dato che aggiorna solo i file di Luma3DS presenti sulla tua scheda SD. Se avvii la console senza una scheda SD inserita, verrà utilizzata la versione di sistema installata nella CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ dato che aggiorna solo i file di Luma3DS presenti sulla tua scheda SD. Se avvii
{% capture notice-6 %}
Adesso avvierai di default il CFW Luma3DS sulla SysNAND.
+
Puoi tenere premuto (Select) all'accensione della console per aprire il menu di Luma3DS.
+
Puoi tenere premuto (Start) all'accensione della console per avviare il menu chainloader di Luma3DS (tieni presente che comunque verrà visualizzato solo se viene rilevato più di un payload).
+
Puoi tenere premuto (Start) + (Select) + (X) all'accensione per creare un dump del bootrom ARM11 (`boot11.bin`), del bootrom ARM9 (`boot9.bin`) e del file OTP (`OTP.bin`) univoco della tua console nella cartella `/boot9strap/` della tua scheda SD (tieni presente che non verrà notificato nulla a schermo).
+
Puoi premere i pulsanti (L) + (Giù) + (Select) in qualunque momento per accedere al menu di Rosalina, integrato in Luma3DS. Per una lista completa delle funzionalità di Rosalina, consulta la [pagina della versione 8.0 di Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ Per usare [NTR CFW](https://github.com/44670/BootNTR/), installa [BootNTR Select
{% capture notice-7 %}
Rimuovi tutti i file e le cartelle presenti nella directory principale della tua scheda SD che *NON* sono presenti nella seguente immagine. Se presente, non eliminare la cartella `DCIM` in quanto contiene tutte le foto scattate con la fotocamera del 3DS:
-
+
{% endcapture %}
diff --git a/_pages/it_IT/flashing-ntrboot-(custom-firmware).txt b/_pages/it_IT/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..70d4a7d9cb
--- /dev/null
+++ b/_pages/it_IT/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flash di ntrboot (Custom Firmware)"
+---
+
+Prima di procedere, assicurati di aver letto tutte le informazioni presenti alla pagina [ntrboot](ntrboot)
+
+Tieni presente che non potrai usare la flashcart normalmente finché vi sarà installato l'exploit ntrboot. Per rimuoverlo dalla flashcart al termine dell'installazione, sono presenti al termine della guida delle istruzioni opzionali.
+{: .notice--warning}
+
+Tieni presente che in rare circostanze è possibile **brickare** una flashcart contraffatta durante il flashing, e renderla permanentemente inutilizzabile. È improbabile, tuttavia sono supportate soltanto le flashcart originali qui indicate. Per ridurre i rischi di ottenere una flashcart contraffatta, si raccomanda di comprarne una solo da siti affidabili (come [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Cosa serve
+
+* La flashcart DS / DSi compatibile con ntrboot:
+ + Un'Acekard 2i o una R4i Gold 3DS RTS
+* Due console 3DS
+ + **Il 3DS di partenza**: la console 3DS che ha già installato un qualche tipo di custom firmware (come boot9strap o arm9loaderhax)
+ + **Il 3DS di destinazione**: la console con versione del software originale
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap, non i file `devkit`)*
+* L'ultima versione di [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Istruzioni
+
+##### Sezione I - Preparazione
+
+1. Spegni il **3DS di partenza**
+1. Inserisci la scheda SD del **3DS di partenza** nel tuo computer
+1. Crea una cartella chiamata `ntrboot` nella directory principale della tua scheda SD
+1. Copia i file `boot9strap_ntr.firm` e `boot9strap_ntr.firm.sha` dall'archivio `.zip` di boot9strap ntr nella cartella `/ntrboot/` della tua scheda SD
+1. Copia il file `ntrboot_flasher.firm` dall'archivio `.zip` di ntrboot_flasher nella cartella `/luma/payloads` della scheda SD del **3DS di partenza**
+1. Reinserisci la scheda SD del **3DS di partenza** nel **3DS di partenza**
+1. Inserisci la flashcart DS / DSi compatibile con ntrboot nel **3DS di partenza**
+
+##### Sezione II - Installare ntrboot
+
+1. Avvia il chainloader Luma3DS tenendo premuto (Start) all'accensione del **3DS di partenza**
+1. Seleziona "ntrboot_flasher"
+1. Seleziona "Dump Flash"
+1. Attendi il termine del processo
+1. Premi (B) per ritornare al menu principale
+1. Seleziona "Inject Ntrboot"
+1. Premi (Y) per procedere
+1. Premi (R) per retail unit ntrboot
+1. Attendi il termine del processo
+1. Premi (B) per ritornare al menu principale
+1. Seleziona "EXIT" per spegnere il **3DS di partenza**
+
+___
+
+Prosegui con l'[Installazione di boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/it_IT/flashing-ntrboot-(powersaves).txt b/_pages/it_IT/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..12a7ec91cf
--- /dev/null
+++ b/_pages/it_IT/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flash di ntrboot (Powersaves)"
+---
+
+Non è ancora pronto, al suo posto è presente solo una pagina temporanea.
\ No newline at end of file
diff --git a/_pages/it_IT/get-started-(new-3ds).txt b/_pages/it_IT/get-started-(new-3ds).txt
index 47e21f481e..84bb475b02 100644
--- a/_pages/it_IT/get-started-(new-3ds).txt
+++ b/_pages/it_IT/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Cominciamo! (New 3DS)"
---
-Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante.
-{: .notice--primary}
+Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante. I campi "da" e "a" sono inclusivi. Questo vuol dire che, per esempio, la riga "da 9.0.0 a 9.2.0" include 9.0.0, 9.1.0 e 9.2.0.
-I campi "da" e "a" sono inclusivi. Questo vuol dire che, per esempio, la riga "da 9.0.0 a 9.2.0" include 9.0.0, 9.1.0 e 9.2.0.
-{: .notice--info}
-
-Ricorda che l'ultimo numero della tua versione di sistema (quello preceduto da un trattino) si riferisce alla tua versione del browser internet. Al momento, tale versione è irrilevante allo scopo della guida.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Al momento, tale versione è irrilevante allo scopo della guida.
Puoi effettuare in qualunque caso un [aggiornamento con scheda di gioco](cart-update) ad una versione successiva della stessa colonna per poter seguirne le istruzioni.
-{: .notice--info}
Puoi vedere quale versione del software possiedi selezionando le Impostazioni della console e guardando in basso a destra sullo schermo superiore.
-{: .notice--success}
{: .notice--info}
@@ -61,8 +54,7 @@ Puoi vedere quale versione del software possiedi selezionando le Impostazioni de
TUTTE LE VERSIONI
|
- Installazione di boot9strap (ntrboothax)
(Richiede una flashcart compatibile) or Installazione di boot9strap (Hardmod)
(Richiede fare saldature) |
-
+ ntrboot
(Richiede una flashcart compatibile) or Installazione di boot9strap (Hardmod)
(Richiede fare saldature) |
\ No newline at end of file
diff --git a/_pages/it_IT/get-started-(old-3ds).txt b/_pages/it_IT/get-started-(old-3ds).txt
index 2440874660..24e5f25a7c 100644
--- a/_pages/it_IT/get-started-(old-3ds).txt
+++ b/_pages/it_IT/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Cominciamo! (Old 3DS)"
---
-Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante.
-{: .notice--primary}
+Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante. I campi "da" e "a" sono inclusivi. Questo vuol dire che, per esempio, la riga "da 9.0.0 a 9.2.0" include 9.0.0, 9.1.0 e 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Se la versione termina con -0 allora non hai un browser, mentre qualsiasi altro numero superiore a -0 indica che è installato un browser.
-{% capture notice-1 %}
-Le ultime due colonne della tabella si riferiscono all'ultimo numero della tua versione (che corrisponde alla versione del browser installata nel sistema). Se la versione termina con -0 allora non hai un browser, mentre qualsiasi altro numero superiore a -0 indica che è installato un browser.
-
-I campi "da" e "a" sono inclusivi. Questo vuol dire che, per esempio, la riga "da 9.0.0 a 9.2.0" include 9.0.0, 9.1.0 e 9.2.0.
-
Ad esempio, se dovessi avere la versione del software "5.0.0-0U", seguirai la colonna "Senza Browser" e la riga "da 5.0.0 a 5.1.0." perché la versione del software di sistema è inclusa in tale intervallo e non è presente un browser installato.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
Puoi effettuare in qualunque caso un [aggiornamento con scheda di gioco](cart-update) ad una versione successiva della stessa colonna per poter seguirne le istruzioni.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Tieni presente che tramite scheda di gioco vengono aggiornate solamente le applicazioni principali del sistema, come le Impostazioni della console, il menu HOME, ecc. Non vengono invece aggiornate le funzionalità come Sound Nintendo 3DS o le funzionalità che necessitano di Internet, come ad esempio il Trasferimento dati, il Browser Internet, la Piazza Mii StreetPass o l'eShop.
-
-Ciò significa che se aggiornate con una scheda di gioco da una versione avente una versione di Sound Nintendo 3DS obsoleta *(<7.0.0 per Old 3DS EUR, USA, JAP e KOR)* ad una versione con la stessa applicazione aggiornata, [Soundhax](homebrew-launcher-(soundhax)) non funzionerà! Dovrai utilizzare un [metodo alternativo](homebrew-launcher-(alternatives)) per avviare l'Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Se hai aggiornato utilizzando una scheda di gioco contenente la versione del software 9.9.0 o maggiore *(e quindi hai una versione di sistema uguale o maggiore a 9.9.0, ma un browser ad una versione minore o uguale a -25, come ad esempio 10.2.0-24)*, il tuo browser è stato rimosso e dovrai utilizzare la colonna "Senza Browser".
-{: .notice--warning}
Puoi vedere quale versione del software possiedi selezionando le Impostazioni della console e guardando in basso a destra sullo schermo superiore.
-{: .notice--success}
{: .notice--info}
+Se hai aggiornato utilizzando una scheda di gioco contenente la versione del software 9.9.0 o maggiore *(e quindi hai una versione di sistema uguale o maggiore a 9.9.0, ma un browser ad una versione minore o uguale a -25, come ad esempio 10.2.0-24)*, il tuo browser è stato rimosso e dovrai utilizzare la colonna "Senza Browser".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/it_IT/get-started.txt b/_pages/it_IT/get-started.txt
index db1e9525ba..aaeefa8d27 100644
--- a/_pages/it_IT/get-started.txt
+++ b/_pages/it_IT/get-started.txt
@@ -2,23 +2,14 @@
title: "Cominciamo!"
---
-In questa sezione verrà spiegato come installare boot9strap su un 3DS o 2DS *senza alcun custom firmware installato*. Se hai già installato arm9loaderhax e stai cercando di aggiornare a boot9strap, vai alla pagina [Da A9LH a B9S](updating-to-boot9strap).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. In questa pagina potrai trovare il corretto punto di partenza per la tua console.
-Il colore delle console nelle immagini potrebbe variare, ma verifica attentamente la disposizione dei pulsanti e la forma della console per assicurarti di selezionare quella corretta.
-{: .notice}
-
-Clicca sull'immagine della tua console per proseguire alla sezione corretta della guida.
-{: .notice--primary}
-
-Console di modello, versione del software e regione diversi richiederanno procedure differenti per installare correttamente il Custom Firmware tramite boot9strap. In questa pagina potrai trovare il corretto punto di partenza per la tua console.
-{: .notice--info}
+Clicca sull'immagine della tua console per proseguire alla sezione corretta della guida. Il colore delle console nelle immagini potrebbe variare, ma verifica attentamente la disposizione dei pulsanti e la forma della console per assicurarti di selezionare quella corretta.
Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su EmuNAND, segui tutti i passaggi mentre sei in SysNAND. Potrai trasferire i tuoi dati dall'EmuNAND alla SysNAND con B9S alla fine dell'installazione.
-{: .notice--info}
-Gli screenshot presenti in questa guida possono essere ingranditi con un click per mostrare ulteriori dettagli.
-{: .notice--info}
+In questa sezione verrà spiegato come installare boot9strap su un 3DS o 2DS *senza alcun custom firmware installato*. Se hai già installato arm9loaderhax e stai cercando di aggiornare a boot9strap, vai alla pagina [Da A9LH a B9S](updating-to-boot9strap).
+{: .notice--primary}
Prima di iniziare, gli utenti Windows dovrebbero attivare l'opzione per visualizzare le estensioni dei file. Basta seguire le istruzioni indicate nella pagina delle [Estensioni dei file (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Prima di iniziare, gli utenti Windows dovrebbero attivare l'opzione per visualiz
Prima di iniziare è consigliabile verificare che la tua scheda SD sia priva di errori usando [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)) o [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Tieni presente che i nuovi metodi di installazione tramite [ntrboothax](installing-boot9strap-(ntrboothax)) e [hardmod](installing-boot9strap-(hardmod)) sono effettuabili su *tutte le console, di ogni regione e versione del sistema*! Sono incluse le console di regionalità CHN e TWN, precedentemente non hackabili!
-{: .notice--success}
-
{% capture notice-1 %}
È stata segnalata recentemente un'ondata di ban da parte di Nintendo riscontrata da utenti con CFW. Per ridurre il rischio che capiti anche a te, esegui i seguenti passaggi prima di iniziare questa guida:
diff --git a/_pages/it_IT/godmode9-usage.txt b/_pages/it_IT/godmode9-usage.txt
index 3c918fa6fd..e07746e5b1 100644
--- a/_pages/it_IT/godmode9-usage.txt
+++ b/_pages/it_IT/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "Usare GodMode9"
---
GodMode9 è un file browser per il Nintendo 3DS che dà pieno accesso ai file sulla tua scheda SD, ai file delle partizioni FAT della SysNAND e della EmuNAND, e a molto altro ancora. Tra le varie funzioni, puoi anche copiare, cancellare, rinominare file e creare cartelle.
-{: .notice--primary}
Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella cartella `/luma/payloads/` della tua scheda SD, per seguire le istruzioni riportate dovrai avviare la console tenendo (Start); apparirà un "menu chainloader" dove dovrai selezionare "GodMode9" tramite il D-Pad e il pulsante (A).
-{: .notice--info}
{% capture notice %}
È uno strumento molto potente che permette di fare qualunque modifica ai file di sistema del 3DS. Tuttavia, sono presenti salvaguardie per non danneggiare accidentalmente dati importanti della console.
-
+
Il sistema dei permessi di scrittura ti protegge facendo apparire avvisi e costringendoti ad immettere una sequenza di sblocco ogni volta si tentasse di scrivere sulla SysNAND. Non è possibile sovrascrivere o modificare dati importanti se prima non si immette tale sequenza, né è possibile sbloccare i permessi accidentalmente. Come sempre, sii intelligente e conserva dei backup per sicurezza.
{% endcapture %}
diff --git a/_pages/it_IT/h2testw-(windows).txt b/_pages/it_IT/h2testw-(windows).txt
index 13af5065da..79df90b379 100644
--- a/_pages/it_IT/h2testw-(windows).txt
+++ b/_pages/it_IT/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
In questa sezione aggiuntiva verrà spiegato come verificare la presenza di errori nella tua scheda SD utilizzando h2testw.
-{: .notice--info}
A seconda delle dimensioni della tua scheda SD e della velocità del tuo computer, questo procedimento può durare diverse ore!
-{: .notice--info}
Questa pagina è solo per utenti Windows. Se non sei su Windows, usa [F3 (linux)](f3-(linux)) o [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Cosa serve
diff --git a/_pages/it_IT/home.txt b/_pages/it_IT/home.txt
index fe7174288d..c0421afa94 100644
--- a/_pages/it_IT/home.txt
+++ b/_pages/it_IT/home.txt
@@ -37,7 +37,7 @@ Nella maggior parte dei casi, l'avvio di homebrew sulla tua console è al 100% g
Un **Custom Firmware** ("CFW") ti permette di accedere a funzionalità avanzate (spesso) non disponibili con un homebrew userland. Ad esempio, le signature patch ti permettono di installare titoli non firmati in modo tale che appaiano nel menu HOME.
-È possibile installare un CFW su qualunque console con versione del software 11.5.0 o inferiore.
+È possibile installare un CFW su qualunque console di qualunque versione (ma in caso sia superiore a 11.3.0 possono essere necessari ulteriori tool o accessori).
## Cosa viene installato con questa guida?
diff --git a/_pages/it_IT/homebrew-launcher-(alternatives).txt b/_pages/it_IT/homebrew-launcher-(alternatives).txt
index aaaed5cc72..35fbfe41c2 100644
--- a/_pages/it_IT/homebrew-launcher-(alternatives).txt
+++ b/_pages/it_IT/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternative)"
---
L'Homebrew Launcher ha numerosi entrypoint, o metodi per essere avviato.
-{: .notice--info}
Se non puoi utilizzare browserhax (vedi la tabella qui sotto), non possiedi alcuno dei seguenti giochi e non hai a disposizione un altro 3DS che può accedere all'Homebrew Launcher, l'alternativa più economica è acquistare la versione "Nintendo Selects" di [Ocarina of Time 3D](http://amzn.eu/1B4k35L) (assicurati di acquistare la versione corretta per la tua regione) e un [Powersaves](http://amzn.eu/38VYEIF) (compatibile con tutte le console), e poi selezionare l'oot3dhax dalla tabella sottostante.
-{: .notice--info}
Assicurati che la comunicazione wireless sia attiva dato che udsploit (usato nella prossima pagina) ha bisogno di poter accedere al modulo wireless della console, e alcune (come il New 3DS, il New 2DS e l'Old 2DS) non possono gestirne l'attivazione tramite Homebrew Launcher. Non è necessaria la connessione ad un access point.
-{: .notice--info}
#### Cosa serve
diff --git a/_pages/it_IT/homebrew-launcher-(soundhax).txt b/_pages/it_IT/homebrew-launcher-(soundhax).txt
index fe4cf1d799..1b2147af0e 100644
--- a/_pages/it_IT/homebrew-launcher-(soundhax).txt
+++ b/_pages/it_IT/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
L'Homebrew Launcher ha numerosi entrypoint, o metodi per essere avviato.
-{: .notice--info}
Soundhax è compatibile con le versioni del software comprese tra 9.0.0 e 11.3.0 nelle regioni EUR, JPN, KOR e USA.
-{: .notice--info}
Assicurati che la comunicazione wireless sia attiva dato che udsploit (usato nella prossima pagina) ha bisogno di poter accedere al modulo wireless della console, e alcune (come il New 3DS, il New 2DS e l'Old 2DS) non possono gestirne l'attivazione tramite Homebrew Launcher. Non è necessaria la connessione ad un access point.
-{: .notice--info}
{% capture notice-1 %}
Tieni presente che tramite scheda di gioco vengono aggiornate solamente le applicazioni principali del sistema, come le Impostazioni della console, il menu HOME, ecc. Non vengono invece aggiornate le funzionalità come Sound Nintendo 3DS o le funzionalità che necessitano di Internet, come ad esempio il Trasferimento dati, il Browser Internet, la Piazza Mii StreetPass o l'eShop.
-
+
Ciò significa che se aggiornate con una scheda di gioco da una versione avente una versione di Sound Nintendo 3DS obsoleta *(<7.0.0 per Old 3DS EUR, USA, JAP e KOR)* ad una versione con la stessa applicazione aggiornata, [Soundhax](homebrew-launcher-(soundhax)) non funzionerà! Dovrai utilizzare un [metodo alternativo](homebrew-launcher-(alternatives)) per avviare l'Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/it_IT/installing-boot9strap-(browser).txt b/_pages/it_IT/installing-boot9strap-(browser).txt
index 51e0c19768..6cafe84cb7 100644
--- a/_pages/it_IT/installing-boot9strap-(browser).txt
+++ b/_pages/it_IT/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installazione di boot9strap (Browser)"
---
Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su EmuNAND, ricorda che questa guida interessa solamente la SysNAND per cui dovresti seguire le istruzioni in tale modalità. Tieni presente che i termini EmuNAND e RedNAND si riferiscono a due implementazioni leggermente diverse [dello stesso concetto](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Cosa serve
diff --git a/_pages/it_IT/installing-boot9strap-(dsiware).txt b/_pages/it_IT/installing-boot9strap-(dsiware).txt
index b1faad4680..f85520688c 100644
--- a/_pages/it_IT/installing-boot9strap-(dsiware).txt
+++ b/_pages/it_IT/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installazione di boot9strap (DSiWare)"
---
Con la versione del software 11.5.0, ci sono due metodi differenti per installare boot9strap tramite DSiWare.
-{: .notice--info}
Uno dei due metodi funziona solo con quattro giochi specifici, non più in vendita sull'eShop, mentre l'altro funziona con determinati giochi ancora presenti.
-{: .notice--info}
Entrambi i metodi richiedono due console. Un 3DS (o 2DS) deve avere un custom firmware (come boot9strap o arm9loaderhax) e sarà riferito come *3DS di partenza*, mentre l'altro 3DS (o 2DS) deve avere versione del software 11.5.0 e sarà riferito come *3DS di destinazione*.
-{: .notice--info}
-
-Entrambe le console DEVONO essere della stessa regione.
-{: .notice--warning}
Entrambi i metodi partono con il presupposto che il 3DS con custom firmware stia utilizzando boot9strap o arm9loaderhax installato tramite questa guida. Anche se è possibile che il metodo funzioni anche con altri custom firmware, fornirne le istruzioni è al di fuori dello scopo di questa guida.
-{: .notice--info}
Entrambi i metodi usano una combinazione dell'exploit "testo in chiaro noto nelle partizioni FIRM" spiegato [qui](https://www.3dbrew.org/wiki/3DS_System_Flaws) con la possibilità dei titoli DSiWare di leggere e scrivere in un qualunque punto di una NAND criptata.
-{: .notice--info}
-{% capture notice-4 %}
Entrambi i metodi richiedono di effettuare un [Trasferimento dati](https://www.nintendo.it/Servizio-al-consumatore/New-Nintendo-3DS-e-New-Nintendo-3DS-XL/Trasferire-i-dati-tra-le-console/Guida-passo-dopo-passo-per-il-trasferimento-dati/Guida-passo-dopo-passo-per-il-trasferimento-dati-956502.html) da un 3DS con CFW a un 3DS stock tra i passi della guida. Il Trasferimento dei dati funzionerà *soltanto in queste modalità*:
+ New 3DS o New 2DS -> New 3DS o New 2DS
+ Old 3DS o Old 2DS -> Old 3DS o Old 2DS
- + Old 3DS o Old 2DS -> New 3DS o New 2DS
-{% endcapture %}
+ + Old 3DS o Old 2DS -> New 3DS o New 2DS
-{{ notice-4 | markdownify }}
+Entrambe le console DEVONO essere della stessa regione.
+{: .notice--warning}
-Con entrambi i metodi il NNID del 3DS di partenza rimarrà bloccato nel 3DS di destinazione a meno che non venga effettuato un altro Trasferimento dei dati tra i due 3DS o chiami Nintendo! (ulteriori dettagli saranno forniti tra i passi della guida)
-{: .notice--danger}
-
-Il Trasferimento dei dati può essere eseguito solo una volta a settimana per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Il Trasferimento dei dati può essere eseguito solo una volta a settimana per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installazione di boot9strap (inject di salvataggio su DSiWare)](installing-boot9strap-(dsiware-save-injection))
-
+
Questo metodo richiede che il 3DS di partenza possegga una versione regolarmente acquistata di uno dei seguenti giochi:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ Una copia pirata del gioco *non* funzionerà, e tutti i giochi sopracitati sono
{% capture notice-1 %}
[Installazione di boot9strap (inject su DSiWare)](installing-boot9strap-(dsiware-game-injection))
-
+
Questo metodo richiede che il 3DS di partenza compri o possegga una versione regolarmente acquistata di uno dei giochi indicati nella pagina [Installazione di boot9strap (lista dei giochi per inject su DSiWare)](installing-boot9strap-(dsiware-game-injection-list)).
-
+
Una copia pirata del gioco *non* funzionerà.
{% endcapture %}
diff --git a/_pages/it_IT/installing-boot9strap-(dsiware-game-injection).txt b/_pages/it_IT/installing-boot9strap-(dsiware-game-injection).txt
index aa200d43a8..e4c0964fd5 100644
--- a/_pages/it_IT/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/it_IT/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installazione di boot9strap (inject su DSiWare)"
---
Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella cartella `/luma/payloads/` della tua scheda SD, per seguire le istruzioni riportate dovrai avviare la console tenendo (Start); apparirà un "menu chainloader" dove dovrai selezionare "GodMode9" tramite il D-Pad e il pulsante (A).
-{: .notice--info}
**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
Prima di procedere, assicurati di aver letto tutte le informazioni e gli avvisi su [Installazione di boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+Se non usi il file `.firm` corrispondente al 3DS di destinazione, BRICKERAI la console! Assicurati di scaricare ed usare quello corretto!
{: .notice--danger}
#### Cosa serve
* Due console 3DS
- + **Il 3DS di partenza**: il 3DS che ha in esecuzione qualche tipo di custom firmware (come ad esempio boot9strap o arm9loaderhax) *aggiornato all'ultima versione*
- + **Il 3DS di destinazione**: il 3DS con versione del software *11.5.0*
+ + **Il 3DS di partenza**: la console che ha in esecuzione un custom firmware (come ad esempio boot9strap o arm9loaderhax) *aggiornato all'ultima versione*
+ + **Il 3DS di destinazione**: la console con versione del software *11.5.0*
* Acquistare (o essere già in possesso) di un gioco DSiWare compatibile dall'eShop sul **3DS di origine**
+ Una copia pirata del gioco **non** funzionerà
+ La lista completa dei giochi compatibili si può trovare alla pagina [Installazione di boot9strap (lista dei giochi per inject su DSiWare)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/it_IT/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/it_IT/installing-boot9strap-(dsiware-game-injection-list).txt
index 94698794b1..daad7fad15 100644
--- a/_pages/it_IT/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/it_IT/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installazione di boot9strap (lista dei giochi per inject su DSiWare)"
---
Questa è una lista automaticamente generata di tutti i giochi compatibili per l'[Installazione di boot9strap (inject su DSiWare)](installing-boot9strap-(dsiware)).
-{: .notice--primary}
-L'elenco è suddiviso in base alla regione nel seguente ordine: USA, EUR, JPN.
-{: .notice--info}
-
-Ogni sezione è ordinata in base al prezzo crescente.
-{: .notice--info}
+L'elenco è suddiviso in base alla regione nel seguente ordine: USA, EUR, JPN. Ogni sezione è ordinata in base al prezzo crescente.
I codici QR possono essere scansionati tramite la pressione dei tasti (L) + (R) nel menu HOME, quindi toccando l'icona QR sullo schermo inferiore.
-{: .notice--info}
-Vi sono dei requisiti sulle dimensioni in quanto sia il DSiWare iniettato che il suo salvataggio modificato non devono avere dimensioni diverse da quelle originali per poter essere trasferiti tramite Trasferimento dati. Questo vuol dire che il DSiWare di partenza deve essere grande abbastanza per contenere il DSiWare modificato.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/it_IT/installing-boot9strap-(dsiware-save-injection).txt b/_pages/it_IT/installing-boot9strap-(dsiware-save-injection).txt
index 5e72fbf7a1..85047d1af4 100644
--- a/_pages/it_IT/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/it_IT/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,13 +3,10 @@ title: "Installazione di boot9strap (inject di salvataggio su DSiWare)"
---
Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella cartella `/luma/payloads/` della tua scheda SD, per seguire le istruzioni riportate dovrai avviare la console tenendo (Start); apparirà un "menu chainloader" dove dovrai selezionare "GodMode9" tramite il D-Pad e il pulsante (A).
-{: .notice--info}
**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
Prima di procedere, assicurati di aver letto tutte le informazioni e gli avvisi su [Installazione di boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
Se non usi il file `.firm` corrispondente al 3DS di destinazione, BRICKERAI la console! Assicurati di scaricare ed usare quello corretto!
{: .notice--danger}
@@ -17,8 +14,8 @@ Se non usi il file `.firm` corrispondente al 3DS di destinazione, BRICKERAI la c
#### Cosa serve
* Due console 3DS
- + **Il 3DS di partenza**: il 3DS che ha in esecuzione un custom firmware (come ad esempio boot9strap o arm9loaderhax) *aggiornato all'ultima versione*
- + **Il 3DS di destinazione**: il 3DS con versione del software *11.5.0*
+ + **Il 3DS di partenza**: la console che ha in esecuzione un custom firmware (come ad esempio boot9strap o arm9loaderhax) *aggiornato all'ultima versione*
+ + **Il 3DS di destinazione**: la console con versione del software *11.5.0*
* Possedere uno dei seguenti giochi DSIWare (una copia pirata del gioco **non** funzionerà) sul **3DS di partenza**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/it_IT/installing-boot9strap-(hardmod).txt b/_pages/it_IT/installing-boot9strap-(hardmod).txt
index 5d70f080e8..b42da78491 100644
--- a/_pages/it_IT/installing-boot9strap-(hardmod).txt
+++ b/_pages/it_IT/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installazione di boot9strap (Hardmod)"
---
[Qui](https://gbatemp.net/threads/414498/) puoi trovare un'ottima guida per eseguire un'hardmod. Se hai un New 3DS, leggi [questo](https://github.com/Plailect/Guide/issues/681) e [quest'altro](https://github.com/Plailect/Guide/issues/1185) avviso prima di iniziare l'hardmod.
-{: .notice--info}
Questa è un'implementazione funzionante dell'exploit del "testo in chiaro noto nelle partizioni FIRM" spiegato [qui](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
Questo processo funziona su New 3DS, New 2DS, Old 3DS e Old 2DS su *tutte* le versioni per le quali è presente un apposito file `.firm`.
-{: .notice--success}
#### Cosa serve
diff --git a/_pages/it_IT/installing-boot9strap-(homebrew-launcher).txt b/_pages/it_IT/installing-boot9strap-(homebrew-launcher).txt
index a95c5fb509..40beebf74a 100644
--- a/_pages/it_IT/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/it_IT/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installazione di boot9strap (Homebrew Launcher)"
---
Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su EmuNAND, ricorda che questa guida interessa solamente la SysNAND per cui dovresti seguire le istruzioni in tale modalità. Tieni presente che i termini EmuNAND e RedNAND si riferiscono a due implementazioni leggermente diverse [dello stesso concetto](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Istruzioni
@@ -20,6 +19,8 @@ Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su E
+ Se dovessi *ancora* riscontrare l'errore "PM INIT FAILED", prova ad usare la [versione r19 di safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Se la console dovesse bloccarsi, forzane lo spegnimento tenendo premuto il pulsante di accensione, quindi riprova
1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller
+ + Se si avvia il menu di configurazione di Luma3DS anziché SafeB9SInstaller, spegni la tua console e assicurati che il file `safehaxpayload.bin` sia presente nella directory principale della tua scheda SD
+ + Se il file `safehaxpayload.bin` è presente nella directory principale della scheda SD ma comunque continua ad avviarsi il menu di configurazione di Luma3DS, assicurati di [avere abilitato l'opzione per mostrare le estensioni dei file](file-extensions-(windows))
##### Sezione II - Installazione di boot9strap
diff --git a/_pages/it_IT/installing-boot9strap-(mset).txt b/_pages/it_IT/installing-boot9strap-(mset).txt
index 5b05c21cbc..03e28ea568 100644
--- a/_pages/it_IT/installing-boot9strap-(mset).txt
+++ b/_pages/it_IT/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installazione di boot9strap (MSET)"
---
Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su EmuNAND, ricorda che questa guida interessa solamente la SysNAND per cui dovresti seguire le istruzioni in tale modalità. Tieni presente che i termini EmuNAND e RedNAND si riferiscono a due implementazioni leggermente diverse [dello stesso concetto](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Cosa serve
diff --git a/_pages/it_IT/installing-boot9strap-(ntrboot).txt b/_pages/it_IT/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..62ad8f9fc0
--- /dev/null
+++ b/_pages/it_IT/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installazione di boot9strap (ntrboot)"
+---
+
+#### Cosa serve
+
+* Un magnete che ponga la console in modalità riposo (in caso sia del tipo a chiusura)
+* La flashcart con installato ntrboot
+* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)*
+* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)*
+* L'[Homebrew Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Istruzioni
+
+##### Sezione I - Preparazione
+
+1. Spegni il tuo 3DS
+1. Inserisci la scheda SD nel tuo computer
+1. Copia il file `SafeB9SInstaller.firm` nella directory principale della tua scheda SD e rinominalo in `boot.firm`
+1. Copia il _contenuto_ dell'archivio `starter.zip` nella directory principale della tua scheda SD
+1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD
+1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD
+
+ 
+ {: .notice--info}
+
+1. Reinserisci la scheda SD nel Nintendo 3DS
+1. Accendi la console
+
+##### Sezione II - ntrboot
+
+1. Trova con il magnete il punto che pone la console in modalità riposo
+ + Questo passo non è necessario in caso utilizzi una console non a chiusura (come un Old 2DS)
+1. Spegni il tuo 3DS
+1. Inserisci la flashcart nella tua console
+1. Avvia la console, posando il magnete nel punto precedentemente localizzato (o utilizzando il pulsante di sospensione su console non a chiusura), e tenendo premuti i pulsanti (Start) + (Select) + (X)
+ + Data la complessita dell'operazione, potrebbero volerci più tentativi
+1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller
+
+##### Sezione III - Installazione di boot9strap
+
+1. Attendi il termine di tutti i controlli di sicurezza
+1. Quando richiesto, inserisci la combinazione di tasti richiesta a schermo per installare boot9strap
+1. Al termine, forza lo spegnimento della console tenendo premuto il pulsante di accensione
+ + Finché non verrà completata la successiva sezione, la console visualizzerà soltanto la schermata di SafeB9SInstaller all'accensione
+
+##### Sezione IV - Configurare Luma3DS
+
+1. Inserisci la scheda SD nel tuo computer
+1. Elimina il file `boot.bin` dalla directory principale della tua scheda SD
+1. Copia il file `boot.firm` dall'archivio `.7z` di Luma3DS nella directory principale della tua scheda SD
+1. Reinserisci la scheda SD nel Nintendo 3DS
+1. Accendi la console
+1. La tua console dovrebbe avviarsi all'interno del menu di configurazione di Luma3DS
+ + Se ottieni una schermata nera, [segui questa guida per risolvere il problema](troubleshooting#ts_sys_b9s)
+1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni:
+ + **"Show NAND or user string in System Settings"**
+1. Premi (Start) per salvare e riavviare il 3DS
+ + Se ottieni un errore, continua comunque alla pagina successiva
+
+___
+
+Prosegui con il [Completamento dell'installazione](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Rimozione di ntrboot
+
+Questa è una sezione facoltativa che ti permetterà di riportare la flashcart al suo stato originale (per poter utilizzarne le funzionalità standard).
+{: .notice--info}
+
+Non seguire questa parte finché non avrai completato tutte le altre istruzioni indicate in questa pagina.
+{: .notice--warning}
+
+1. Avvia il chainloader Luma3DS premendo (Start) durante l'avvio del **3DS di partenza**
+1. Seleziona "ntrboot_flasher"
+1. Seleziona "Restore Flash"
+1. Premi (Y) per procedere
+1. Attendi il termine del processo
+1. Premi (B) per ritornare al menu principale
+1. Seleziona "EXIT" per spegnere il **3DS di partenza**
\ No newline at end of file
diff --git a/_pages/it_IT/move-emunand.txt b/_pages/it_IT/move-emunand.txt
index be8441082c..c523106503 100644
--- a/_pages/it_IT/move-emunand.txt
+++ b/_pages/it_IT/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Spostare l'EmuNAND"
---
In questa sezione aggiuntiva verrà spiegato come spostare il contenuto di una EmuNAND preesistente nel nuovo CFW SysNAND, per poi rimuovere la vecchia partizione EmuNAND. Tieni presente che i termini EmuNAND e RedNAND si riferiscono a due implementazioni leggermente diverse [dello stesso concetto](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella cartella `/luma/payloads/` della tua scheda SD, per seguire le istruzioni riportate dovrai avviare la console tenendo (Start); apparirà un "menu chainloader" dove dovrai selezionare "GodMode9" tramite il D-Pad e il pulsante (A).
-{: .notice--info}
+Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella cartella `/luma/payloads/` della tua scheda SD, per seguire le istruzioni riportate dovrai avviare la console tenendo (Start); apparirà un "menu chainloader" dove dovrai selezionare "GodMode9" tramite il D-Pad e il pulsante (A).
**DEVI aver già installato Luma3DS e uno tra boot9strap e arm9loaderhax per poter proseguire.**
{: .notice--danger}
diff --git a/_pages/it_IT/ntr-and-cubic-ninja.txt b/_pages/it_IT/ntr-and-cubic-ninja.txt
index 10164daa7d..91e2b9c77c 100644
--- a/_pages/it_IT/ntr-and-cubic-ninja.txt
+++ b/_pages/it_IT/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR e Cubic Ninja"
---
**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
-**Questo metodo funziona SOLO su New 3DS JPN**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Cosa serve
diff --git a/_pages/it_IT/ntrboot.txt b/_pages/it_IT/ntrboot.txt
new file mode 100644
index 0000000000..091075f9c7
--- /dev/null
+++ b/_pages/it_IT/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+Se hai già installato ntrboot nella tua flashcart, troverai i passi successivi alla pagina [Installazione di boot9strap (ntrboot)](installing-boot9strap-(ntrboot)).
+{: .notice--success}
+
+L'installazione di boot9strap tramite ntrboot richiede una flashcart DS / DSi compatibile. La lista delle flashcart attualmente compatibili è la seguente:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+Ci sono due metodi per installare ntrboot nella tua flashcart.
+
+Entrambi richiedono l'utilizzo di un piccolo magnete se la console di riferimento è a chiusura (vale a dire qualunque 3DS che non sia un Old 2DS con pulsante di sospensione), in quanto la console deve essere in modalità riposo ma al contempo i pulsanti devono rimanere accessibili.
+
+Per testare il funzionamento del magnete, appoggialo vicino ai pulsanti (A)(B)(X)(Y) mentre la console è accesa per verificare l'attivazione della modalità riposo. In tal caso, entrambi gli schermi si spegneranno finché il magnete rimane in questa posizione.
+{: .notice--info}
+
+Tieni presente che non potrai usare la flashcart normalmente finché vi sarà installato l'exploit ntrboot. Per rimuoverlo dalla flashcart al termine dell'installazione, sono presenti al termine della guida delle istruzioni opzionali.
+
+Tieni presente che in rare circostanze è possibile **brickare** una flashcart contraffatta durante il flashing, e renderla permanentemente inutilizzabile. È improbabile, tuttavia sono supportate soltanto le flashcart originali qui indicate. Per ridurre i rischi di ottenere una flashcart contraffatta, si raccomanda di comprarne una solo da siti affidabili (come [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flash di ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+Questo metodo richiede temporaneamente l'utilizzo di una console con già installato un custom firmware (come boot9strap o arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flash di ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+Quando disponibile, questo metodo richiederà temporaneamente l'utilizzo di un [Powersaves](https://www.amazon.it/Action-Replay-PowerSaves-2016-Nintendo/dp/B01EOMFY3C/). Non è ancora pronto, al suo posto è presente solo una pagina temporanea.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/it_IT/region-changing.txt b/_pages/it_IT/region-changing.txt
index 9e9d3e3623..c4adbd9065 100644
--- a/_pages/it_IT/region-changing.txt
+++ b/_pages/it_IT/region-changing.txt
@@ -3,16 +3,12 @@ title: "Cambiare regione"
---
In questa sezione aggiuntiva verrà spiegato come cambiare regionalità su SysNAND con CFW. Per questo scopo, verrà eseguito un CTRTransfer alla versione 9.2.0 della regione alla quale si desidera passare.
-{: .notice--primary}
-**Il cambio della regione è tuttavia quasi completamente inutile in quanto Luma3DS supporta l'avvio di giochi di altre regioni e l'[emulazione regionale](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) su titoli individuali.**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella cartella `/luma/payloads/` della tua scheda SD, per seguire le istruzioni riportate dovrai avviare la console tenendo (Start); apparirà un "menu chainloader" dove dovrai selezionare "GodMode9" tramite il D-Pad e il pulsante (A).
-{: .notice--info}
Questo processo scollegherà il NNID dalla console, in quanto non potrà essere più compatibile. I NNID sono legati alla regione della console con cui vengono creati e non possono essere trasferiti ad un'altra senza un [procedimento avanzato e molto complesso](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Questo processo scollegherà il NNID dalla console, in quanto non potrà essere
Dopo questo procedimento, solo i **New 3DS che non hanno mai acceduto all'eShop** e **qualsiasi Old 3DS** potranno accedere all'eShop dopo aver creato un nuovo NNID legato alla nuova regione. I New 3DS con regione modificata che hanno già avuto accesso all'eShop con la regione originale non potranno creare un nuovo NNID per accedere all'eShop con la nuova regione!
{: .notice--warning}
-Tieni presente che occasionalmente l'eShop potrebbe non funzionare senza alcun motivo apparente. Questo dipende totalmente dai server Nintendo, e non si può fare assolutamente nulla al riguardo.
-{: .notice--warning}
-
-In maniera molto simile, l'eShop potrebbe invece funzionare su console per cui non dovrebbe (come su alcuni New 3DS). Le cause sono correntemente sconosciute.
-{: .notice--warning}
+Tieni presente che occasionalmente l'eShop potrebbe non funzionare senza alcun motivo apparente. Questo dipende totalmente dai server Nintendo, e non si può fare assolutamente nulla al riguardo. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Le cause sono correntemente sconosciute.
Il cambio regione tramite CTRTransfer (effettuato in questa guida) sembra far smettere di funzionare le patch relative al riavvio della console. La causa è sconosciuta, ma al momento gli utenti in possesso di un Old 3DS non potranno avviare giochi che utilizzano la modalità a memoria estesa (come Monster Hunter, Super Smash Bros e Pokémon Sole / Luna) finché non formattano la console.
-{: .notice--warning}
-Non formattare mai un New 2DS se sei ad una versione del software <11.4.0 altrimenti non potrai più completare l'installazione iniziale!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**DEVI aver già installato Luma3DS e uno tra boot9strap e arm9loaderhax per poter proseguire.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Cosa serve
diff --git a/_pages/it_IT/site-navigation.txt b/_pages/it_IT/site-navigation.txt
index 86af714058..68ffb1da1d 100644
--- a/_pages/it_IT/site-navigation.txt
+++ b/_pages/it_IT/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [Estensioni dei file (Windows)](file-extensions-(windows))
+ [Completamento dell'installazione](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Cominciamo! (New 3DS)](get-started-(new-3ds))
+ [Cominciamo! (Old 3DS)](get-started-(old-3ds))
+ [Cominciamo!](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installazione di boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installazione di boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installazione di boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installazione di boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Spostare l'EmuNAND](move-emunand)
+ [NTR e Cubic Ninja](ntr-and-cubic-ninja)
+ [Cambiare regione](region-changing)
diff --git a/_pages/it_IT/troubleshooting.txt b/_pages/it_IT/troubleshooting.txt
index c5e7effd12..97db55f50f 100644
--- a/_pages/it_IT/troubleshooting.txt
+++ b/_pages/it_IT/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Risoluzione dei problemi"
Se non riesci ad avviare la tua console, consulta la sezione relativa al tuo problema e segui le istruzioni. Una volta risolto il problema, puoi proseguire con la guida principale
(Questa sezione è piuttosto lunga; puoi cercare il tuo problema più velocemente con Ctrl+F)
-{: .notice--primary}
-**Se comunque non riesci a risolvere il tuo problema e hai bisogno di aiuto, incolla il contenuto dei file .log rilevanti dalla directory principale della tua scheda SD in un [Gist](https://gist.github.com/), successivamente fornisci una descrizione dettagliata del tuo problema e delle eventuali operazioni che hai fatto per provare a risolverlo.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-{: .notice--success}
## Le funzionalità DSi/DS non funzionano dopo aver completato la guida
diff --git a/_pages/it_IT/uninstall-cfw.txt b/_pages/it_IT/uninstall-cfw.txt
index 3914c016e4..f9f7dffd21 100644
--- a/_pages/it_IT/uninstall-cfw.txt
+++ b/_pages/it_IT/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Disinstallare il CFW"
---
In questa sezione verrà spiegato come rimuovere completamente il CFW dalla tua console, boot9strap e Luma3DS inclusi, per riportarla al suo stato iniziale.
-{: .notice--danger}
Non sarà più possibile utilizzare i giochi non firmati (in quanto illegittimi), ma potranno essere eliminati manualmente tramite la sezione Gestione dati nelle Impostazioni della console. Puoi usare un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per fare un backup dei salvataggi di questi giochi.
-{: .notice--info}
Il tuo NNID, i giochi regolarmente acquistati o i salvataggi di questi ultimi non verranno toccati.
-{: .notice--info}
Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella cartella `/luma/payloads/` della tua scheda SD, per seguire le istruzioni riportate dovrai avviare la console tenendo (Start); apparirà un "menu chainloader" dove dovrai selezionare "GodMode9" tramite il D-Pad e il pulsante (A).
-{: .notice--info}
#### Cosa serve
diff --git a/_pages/it_IT/updating-b9s.txt b/_pages/it_IT/updating-b9s.txt
index a6b90bda9c..bc66a7323e 100644
--- a/_pages/it_IT/updating-b9s.txt
+++ b/_pages/it_IT/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Aggiornare B9S"
---
Questa pagina spiega come aggiornare la propria installazione di boot9strap all'ultima versione.
-{: .notice--info}
Ricorda che l'ultima versione di Luma3DS *non* è compatibile con la versione 1.0 di boot9strap. È *necessario* aggiornare boot9strap alla versione 1.2 seguendo le istruzioni riportate in questa pagina.
-{: .notice--warning}
{% capture notice-1 %}
È stata segnalata recentemente un'ondata di ban da parte di Nintendo riscontrata da utenti con CFW. Per ridurre il rischio che capiti anche a te, esegui i seguenti passaggi prima di iniziare questa guida:
diff --git a/_pages/ja_JP/9.2.0-ctrtransfer.txt b/_pages/ja_JP/9.2.0-ctrtransfer.txt
index bf8fbf0760..0d8350169a 100644
--- a/_pages/ja_JP/9.2.0-ctrtransfer.txt
+++ b/_pages/ja_JP/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/ja_JP/a9lh-to-b9s.txt b/_pages/ja_JP/a9lh-to-b9s.txt
index b3d7fa4586..10c0ad292e 100644
--- a/_pages/ja_JP/a9lh-to-b9s.txt
+++ b/_pages/ja_JP/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ja_JP/cart-update.txt b/_pages/ja_JP/cart-update.txt
index 9b2e461052..b060a7f59a 100644
--- a/_pages/ja_JP/cart-update.txt
+++ b/_pages/ja_JP/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
すべてのゲームカードには、要求バージョンよりも3DSのバージョンが低い場合のために、ファームウェアイメージが入っています。(インターネット接続は不要です。)
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! その場合、[その他の方法](homebrew-launcher-(alternatives))でHomebrew Launcherを実行しなければなりません！
+
+そのため、ブラウザをまだインストールしていない場合は、カードで更新してもブラウザをインストールしません。 これは実際のシステムバージョン**のみ**が更新されます。*（たとえば 6.0.0-0-> 2.1.0-0）* 最後の番号*（-0）*は変更**されません**。
{% endcapture %}
{{ notice-1 | markdownify }}
-そのため、ブラウザをまだインストールしていない場合は、カードで更新してもブラウザをインストールしません。 これは実際のシステムバージョン**のみ**が更新されます。*（たとえば 6.0.0-0-> 2.1.0-0）* 最後の番号*（-0）*は変更**されません**。
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/ja_JP/credits.txt b/_pages/ja_JP/credits.txt
index 3a13e291c1..87b01918dc 100644
--- a/_pages/ja_JP/credits.txt
+++ b/_pages/ja_JP/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
このページで私があなたを忘れている場合、私に連絡してください。あなたの名前を追加します。
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/ja_JP/f3-(linux).txt b/_pages/ja_JP/f3-(linux).txt
index 8be7233012..aaf75836a3 100644
--- a/_pages/ja_JP/f3-(linux).txt
+++ b/_pages/ja_JP/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
SDカードのサイズとコンピュータのパフォーマンスによって、かかる時間は異なり、数時間もかかる場合があります！
-{: .notice--info}
このページはLinuxユーザー向けです。 Linuxを使用しないユーザーは、[H2testw (windows)](h2testw-(windows))か[F3X (mac)](f3x-(mac))をご覧ください。
-{: .notice--info}
#### 必要なもの
diff --git a/_pages/ja_JP/f3x-(mac).txt b/_pages/ja_JP/f3x-(mac).txt
index cd1e5b34ff..7704f55813 100644
--- a/_pages/ja_JP/f3x-(mac).txt
+++ b/_pages/ja_JP/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
SDカードのサイズとコンピュータのパフォーマンスによって、かかる時間は異なり、数時間もかかる場合があります！
-{: .notice--info}
このページはMacユーザー向けです。 Macを使用しないユーザーは、[H2testw (windows)](h2testw-(windows))または[F3 (Linux)](f3-(linux))をご覧ください。
-{: .notice--info}
#### 必要なもの
diff --git a/_pages/ja_JP/faq.txt b/_pages/ja_JP/faq.txt
index 2ba8648562..a5ac62d7d2 100644
--- a/_pages/ja_JP/faq.txt
+++ b/_pages/ja_JP/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *私のデバイスは最新バージョンを使用しています。それでもハッキングできますか？*
**A:** Yes
-
+
**Q:** *どうやってLuma3DSを更新できますか？*
**A:** Luma3DS Updaterを使用してください
-
+
**Q:** *ハッキングするために、Gateway、Sky3DSみたいな有料ツールを使用する必要があると聞いていましたが、本当ですか？*
**A:** いいえ。 boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *どうやって既存のGatewayセットアップからデバイス上にインストールしたゲームにセーブデータを移行しますか？*
**A:** [これ](https://gbatemp.net/threads/425743/)をご覧ください
-
+
**Q:** *このガイドに従うのに何が必要なの？*
**A:** このガイドは無料ソフトで完成できます
-
+
**Q:** *ゲーム機をハッキングすることの危険性は？*
**A:** 安全チェックを無視しない限り、*基本的*にはデバイスを壊す可能性はありません。
-
+
**Q:** *これを完成すると、すげぇ自制ソフトとエミュレーターも実行できますか？*
**A:** もちろんです！ カスタムファームウェアはHomebrew Launcherの実行を可能にするだけではなく、すべてのシステムバージョンへのアクセスも取得します。つまり、今後アップデートがあっても、カスタムファームウェアを維持できます。
-
+
**Q:** *これを使ったらゲームをその地域を問わずプレイできますか？*
**A:** Luma3DSはリージョンフリーパッチに対応します。これを使って余分な変更や手順をせずどの地域のゲームでもプレイできます。
-
+
**Q:** *CFW SysNANDをアップデートしても安全ですか？*
**A:** はい。 本当に安全だからもう聞かないでください
-
+
**Q:** *サポートはどこ？*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *容量が4GBかもっと小さなSDカードを使用してもいいですか？*
**A:** もちろんです！
-
+
**Q:** *容量が128 GBかもっと大きなSDカードを使ってもいいですか？*
**A:** はい。ですが、一部のユーザーからはこういう容量を使用するとパフォーマンスに影響を及ぼす報告があります。 exFATではなくFAT32でフォーマットしなければならないのでご注意ください。
-
+
**Q:** *終わったら、どうやって新しいSDカードに切り替えますか？*
**A:** ファイルを全部新しいSDカードにコピーしてください。
-
+
**Q:** *NNIDをキープできますか？*
**A:** NNIDを所有する状態でガイドで始めて、ガイドの指示通りに実行すると、最後までもNNIDを失いません。
-
+
**Q:** *システム転送はどうなりますか？*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *パソコンを使わずAndroid携帯みたいなデバイスだけを使って完成できますか ？*
**A:** SDカードのファイルを変更できればいいです！
-
+
**Q:** *助けて！ 何があって起動できなくなっちゃった...*
**A:** [トラブルシューティングガイド](troubleshooting)をご覧ください。
diff --git a/_pages/ja_JP/file-extensions-(windows).txt b/_pages/ja_JP/file-extensions-(windows).txt
index d3c07630ec..6d95278c74 100644
--- a/_pages/ja_JP/file-extensions-(windows).txt
+++ b/_pages/ja_JP/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### 手順
diff --git a/_pages/ja_JP/finalizing-setup.txt b/_pages/ja_JP/finalizing-setup.txt
index f93e1d39d7..bdd2d2ff84 100644
--- a/_pages/ja_JP/finalizing-setup.txt
+++ b/_pages/ja_JP/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### ステップの概要
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
本文では、[AuroraWright](https://github.com/AuroraWright/)さんのLuma3DSで直接にパッチしたSysNANDを実行するようにします。これにより、EmuNANDを実行する必要はゼロになったり、ハッキングされた3DSの使用を簡単にしたり、SDカードの空き領域を節約したりできます。
-
+
手順の一部として、下記のプログラムもインストールします：
+ **FBI** *（CIAフォーマットのゲームとアプリをインストールします）*
@@ -18,10 +17,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### 必要なもの
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-Luma3DS UpdaterでLuma3DSを最新バージョンまで更新できます。そのアプリを起動して (A) を押して更新できます。
+Luma3DS UpdaterでLuma3DSを最新バージョンまで更新できます。そのアプリを起動して (A) を押して更新できます。
+
これは「本体の更新」と違うことで、ただ最新バージョンのLuma3DSファイルをダウンロードして解凍するだけです。
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
(Select) を押したまま起動すると、Luma3DS設定メニューを開きます。
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/ja_JP/flashing-ntrboot-(custom-firmware).txt b/_pages/ja_JP/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..91b32025ce
--- /dev/null
+++ b/_pages/ja_JP/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### 必要なもの
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### 手順
+
+##### セクション I - 準備
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. 処理が完了するまで待ちます
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. 処理が完了するまで待ちます
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ja_JP/flashing-ntrboot-(powersaves).txt b/_pages/ja_JP/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/ja_JP/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/ja_JP/get-started-(new-3ds).txt b/_pages/ja_JP/get-started-(new-3ds).txt
index cc920fd9d0..bb8731de88 100644
--- a/_pages/ja_JP/get-started-(new-3ds).txt
+++ b/_pages/ja_JP/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-下の表からあなたのバージョンに合ったページを選択してください。
-{: .notice--primary}
+下の表からあなたのバージョンに合ったページを選択してください。 Note that the "from" and "to" fields are inclusive. 例えば、「9.0.0以降、9.2.0以前」は9.0.0、9.1.0と9.2.0を含めています。
-Note that the "from" and "to" fields are inclusive. 例えば、「9.0.0以降、9.2.0以前」は9.0.0、9.1.0と9.2.0を含めています。
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/ja_JP/get-started-(old-3ds).txt b/_pages/ja_JP/get-started-(old-3ds).txt
index b4ab414412..8294593331 100644
--- a/_pages/ja_JP/get-started-(old-3ds).txt
+++ b/_pages/ja_JP/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-下の表からあなたのバージョンに合ったページを選択してください。
-{: .notice--primary}
+下の表からあなたのバージョンに合ったページを選択してください。 Note that the "from" and "to" fields are inclusive. 例えば、「9.0.0以降、9.2.0以前」は9.0.0、9.1.0と9.2.0を含めています。
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). その番号が「-0」ならば、ブラウザがインストールされていないことを示します。-0以上のいずれかの番号はそれがインストールされていることを示します。
-{% capture notice-1 %}
-表の最後の二列は、お使いのバージョンの最後の番号(システムにインストールされているブラウザのバージョンに対応します) を示します。 その番号が「-0」ならば、ブラウザがインストールされていないことを示します。-0以上のいずれかの番号はそれがインストールされていることを示します。
-
-「以降」と「以前」に付いている数字は範囲に含まれています。 例えば、「9.0.0以降、9.2.0以前」は9.0.0、9.1.0と9.2.0を含めています。
-
例えば、バージョンは「5.0.0-0U」ならば、「ブラウザなし」欄の「5.0.0以降、5.1.0以前」行に行きます。なぜならシステムバージョンはその範囲に合い、ブラウザがインストールされていないからです。
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! その場合、[その他の方法](homebrew-launcher-(alternatives))でHomebrew Launcherを実行しなければなりません！
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-もしバージョン9.9.0以降のシステムを含むゲームカードで更新すれば*（古いシステムのバージョンは9.9.0以降だが、ブラウザのバージョンは-25以前であることを示します。例えば、10.2.0-24）、ブラウザは削除されてしまい、「ブラウザなし」欄に従わなければなりません。
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+もしバージョン9.9.0以降のシステムを含むゲームカードで更新すれば*（古いシステムのバージョンは9.9.0以降だが、ブラウザのバージョンは-25以前であることを示します。例えば、10.2.0-24）、ブラウザは削除されてしまい、「ブラウザなし」欄に従わなければなりません。
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/ja_JP/get-started.txt b/_pages/ja_JP/get-started.txt
index 7843268876..34bd74645f 100644
--- a/_pages/ja_JP/get-started.txt
+++ b/_pages/ja_JP/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. このページはあなたを正しい手順に導きます。
-デバイスのカラーは図で表示しているものと違うことがありますが、ボタンの位置とデバイスの機能をよく観察して選んでください。
-{: .notice}
-
-デバイスの図をクリックして正しいページへ移動してください。
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. このページはあなたを正しい手順に導きます。
-{: .notice--info}
+デバイスの図をクリックして正しいページへ移動してください。 デバイスのカラーは図で表示しているものと違うことがありますが、ボタンの位置とデバイスの機能をよく観察して選んでください。
まえは3DSをハッキングしたことがあってEmuNAND based CFWセットアップを持っている場合は、SysNANDにあるときすべての手順に従ってください。 Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
始める前には、[H2testw (Windows)](h2testw-(windows))、[F3 (Linux)](f3-(linux))か[F3X (Mac)](f3x-(mac))でSDカードのエラーをチェックするのは万全の策です！
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ja_JP/godmode9-usage.txt b/_pages/ja_JP/godmode9-usage.txt
index 7cfabd42f8..15276db49c 100644
--- a/_pages/ja_JP/godmode9-usage.txt
+++ b/_pages/ja_JP/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/ja_JP/h2testw-(windows).txt b/_pages/ja_JP/h2testw-(windows).txt
index ac0cfb4954..09b68f651e 100644
--- a/_pages/ja_JP/h2testw-(windows).txt
+++ b/_pages/ja_JP/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
SDカードのサイズとコンピュータのパフォーマンスによって、かかる時間は異なり、数時間もかかる場合があります！
-{: .notice--info}
このページはWindowsユーザー向けです。 Windowsを使用しないユーザーは、[F3 (linux)](f3-(linux))または[F3X (mac)](f3x-(mac))をご覧ください。
-{: .notice--info}
#### 必要なもの
diff --git a/_pages/ja_JP/home.txt b/_pages/ja_JP/home.txt
index dc53bef8c9..cf7aca7d53 100644
--- a/_pages/ja_JP/home.txt
+++ b/_pages/ja_JP/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**カスタム ファームウェア** ("CFW") は高度な技術によりHomebrewでは実現できないようなハッキングを実現しています。 例えば「署名回避パッチ」は、署名のない、許可されていないソフトをHOMEメニューにインストールできます。
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## ごのガイドでインストールされるもの
diff --git a/_pages/ja_JP/homebrew-launcher-(alternatives).txt b/_pages/ja_JP/homebrew-launcher-(alternatives).txt
index 4bb7cc6e29..ab4f9d3285 100644
--- a/_pages/ja_JP/homebrew-launcher-(alternatives).txt
+++ b/_pages/ja_JP/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
Homebrew Launcherは色んなエントリーポイントと起動方法があります。
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### 必要なもの
diff --git a/_pages/ja_JP/homebrew-launcher-(soundhax).txt b/_pages/ja_JP/homebrew-launcher-(soundhax).txt
index c20398e22d..524ea1f3ce 100644
--- a/_pages/ja_JP/homebrew-launcher-(soundhax).txt
+++ b/_pages/ja_JP/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Homebrew Launcherには、さまざまなエントリーポイントや起動方法があります。
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! その場合、[その他の方法](homebrew-launcher-(alternatives))でHomebrew Launcherを実行しなければなりません！
{% endcapture %}
diff --git a/_pages/ja_JP/installing-boot9strap-(browser).txt b/_pages/ja_JP/installing-boot9strap-(browser).txt
index 765fa18f5a..2c866e33d5 100644
--- a/_pages/ja_JP/installing-boot9strap-(browser).txt
+++ b/_pages/ja_JP/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. EmuNANDとRedNANDは[同じ理論](http://3dbrew.org/wiki/NAND_Redirection)の少々違う実装です。
-{: .notice--info}
#### 必要なもの
diff --git a/_pages/ja_JP/installing-boot9strap-(dsiware).txt b/_pages/ja_JP/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/ja_JP/installing-boot9strap-(dsiware).txt
+++ b/_pages/ja_JP/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/ja_JP/installing-boot9strap-(dsiware-game-injection).txt b/_pages/ja_JP/installing-boot9strap-(dsiware-game-injection).txt
index b6857d45f9..4e032b2155 100644
--- a/_pages/ja_JP/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/ja_JP/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### 必要なもの
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/ja_JP/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/ja_JP/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/ja_JP/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/ja_JP/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/ja_JP/installing-boot9strap-(dsiware-save-injection).txt b/_pages/ja_JP/installing-boot9strap-(dsiware-save-injection).txt
index a197b1018c..2463b304c1 100644
--- a/_pages/ja_JP/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/ja_JP/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### 必要なもの
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/ja_JP/installing-boot9strap-(hardmod).txt b/_pages/ja_JP/installing-boot9strap-(hardmod).txt
index 6a13d0a666..24df5ef9f6 100644
--- a/_pages/ja_JP/installing-boot9strap-(hardmod).txt
+++ b/_pages/ja_JP/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### 必要なもの
diff --git a/_pages/ja_JP/installing-boot9strap-(homebrew-launcher).txt b/_pages/ja_JP/installing-boot9strap-(homebrew-launcher).txt
index d12eb5d315..c8af870384 100644
--- a/_pages/ja_JP/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/ja_JP/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. EmuNANDとRedNANDは[同じ理論](http://3dbrew.org/wiki/NAND_Redirection)の少々違う実装です。
-{: .notice--info}
#### 手順
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ 画面がフリーズした場合、電源ボタン長押しで強制的に電源を切り、もう一度やり直してください
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/ja_JP/installing-boot9strap-(mset).txt b/_pages/ja_JP/installing-boot9strap-(mset).txt
index dee9bc236f..f8a2aef181 100644
--- a/_pages/ja_JP/installing-boot9strap-(mset).txt
+++ b/_pages/ja_JP/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. EmuNANDとRedNANDは[同じ理論](http://3dbrew.org/wiki/NAND_Redirection)の少々違う実装です。
-{: .notice--info}
#### 必要なもの
diff --git a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..a89560416e
--- /dev/null
+++ b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### 必要なもの
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *（`.7z` ファイル）*の最新バージョン
+* Homebrew [スターターキット](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### 手順
+
+##### セクション I - 準備
+
+1. Power off your device
+1. パソコンにSDカードを入れます
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. パソコンにSDカードを入れます
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **「Show NAND or user string in System Settings」**
+1. (Start) を押してセーブして再起動します
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. 処理が完了するまで待ちます
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/ja_JP/move-emunand.txt b/_pages/ja_JP/move-emunand.txt
index 414a73d7ab..12302bded9 100644
--- a/_pages/ja_JP/move-emunand.txt
+++ b/_pages/ja_JP/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
このエクストラセクションでは、どうやって古いEmuNANDのコンテンツを新しいSysNAND CFWに移動し、古いEmuNANDパーティションを削除するか紹介します。 EmuNANDとRedNANDは[同じ理論](http://3dbrew.org/wiki/NAND_Redirection)の少々違う実装です。
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/ja_JP/ntr-and-cubic-ninja.txt b/_pages/ja_JP/ntr-and-cubic-ninja.txt
index 8bbb0878f5..a17bcaa2f0 100644
--- a/_pages/ja_JP/ntr-and-cubic-ninja.txt
+++ b/_pages/ja_JP/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTRキュービックニンジャは日本仕様のNew 3DSだけに有効です！**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### 必要なもの
diff --git a/_pages/ja_JP/ntrboot.txt b/_pages/ja_JP/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/ja_JP/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/ja_JP/region-changing.txt b/_pages/ja_JP/region-changing.txt
index 01a92851c6..20772bdc01 100644
--- a/_pages/ja_JP/region-changing.txt
+++ b/_pages/ja_JP/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**現在、Luma3DSは地域問わずにゲームを実行でき、タイトル別の[地域エミュレート](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage)に対応しているため、地域の変更はあんまり必要なくなっています。**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
地域を変更すると、既存のNNIDとの互換性がなくなるため、システムをNNIDとの関連は解除されます。 NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
地域の変更を終えると、**eShopにアクセスしたことのないNew 3DS**と**全てのOld 3DS**だけは新しい地域のNNIDを作成してからeShopにアクセスできます。 もうオリジナル地域のeShopにアクセスしているNew 3DSは地域を変更した後、新しいNNIDを作成できず、新しい地域のeShopにもアクセスできません！
{: .notice--warning}
-でも、上記のeShopにアクセスできるデバイスでも、変更後にアクセスできなくなることがありますので、ご注意ください。 これは任天堂のサーバーに関する事情であり、筆者も制御できません。
-{: .notice--warning}
-
-上記に述べた状況のように、一部の新しい地域にアクセスできないはずなデバイスはアクセスできることがあります（例えば、一部のNew 3DS）。 原因はまだ不明です。
-{: .notice--warning}
+でも、上記のeShopにアクセスできるデバイスでも、変更後にアクセスできなくなることがありますので、ご注意ください。 これは任天堂のサーバーに関する事情であり、筆者も制御できません。 Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). 原因はまだ不明です。
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### 必要なもの
diff --git a/_pages/ja_JP/site-navigation.txt b/_pages/ja_JP/site-navigation.txt
index c883b2aa69..21a00485c1 100644
--- a/_pages/ja_JP/site-navigation.txt
+++ b/_pages/ja_JP/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [よくある質問](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [はじめる（New 3DS）](get-started-(new-3ds))
+ [はじめる（Old 3DS）](get-started-(old-3ds))
+ [はじめる](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [EmuNANDを移動する](move-emunand)
+ [NTRとキュービックニンジャ](ntr-and-cubic-ninja)
+ [地域変更](region-changing)
diff --git a/_pages/ja_JP/troubleshooting.txt b/_pages/ja_JP/troubleshooting.txt
index 7824cf75b9..9b329c1822 100644
--- a/_pages/ja_JP/troubleshooting.txt
+++ b/_pages/ja_JP/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. 問題を解決したら、主なガイドに続いてください。
（内容が長くなりますので、Ctrl+Fであなたの問題について探してください。）
-{: .notice--primary}
-**問題はどうやっても解決できなくてサポートが必要な場合は、SDカードのルートにある.logファイルを[Gist](https://gist.github.com/)に、問題の詳細と試みた解決策と一緒に送信してください。**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS機能はガイドを完成したあと機能しなくなった
diff --git a/_pages/ja_JP/uninstall-cfw.txt b/_pages/ja_JP/uninstall-cfw.txt
index c1cfb3bdf4..d19322bb83 100644
--- a/_pages/ja_JP/uninstall-cfw.txt
+++ b/_pages/ja_JP/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### 必要なもの
diff --git a/_pages/ja_JP/updating-b9s.txt b/_pages/ja_JP/updating-b9s.txt
index 8572841837..ead1f84e72 100644
--- a/_pages/ja_JP/updating-b9s.txt
+++ b/_pages/ja_JP/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ko_KR/9.2.0-ctrtransfer.txt b/_pages/ko_KR/9.2.0-ctrtransfer.txt
index 159997eab3..7ed92c442b 100644
--- a/_pages/ko_KR/9.2.0-ctrtransfer.txt
+++ b/_pages/ko_KR/9.2.0-ctrtransfer.txt
@@ -3,14 +3,11 @@ title: "9.2.0 CTRTransfer"
---
이것은 기기에 9.2.0 CTRTransfer 이미지를 설치하는 추가 섹션입니다.
-{: .notice--primary}
이 페이지의 [마그넷](https://en.wikipedia.org/wiki/Magnet_URI_scheme) 링크를 사용하려면
[Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/ko_KR/a9lh-to-b9s.txt b/_pages/ko_KR/a9lh-to-b9s.txt
index 2e37716d89..46d4705089 100644
--- a/_pages/ko_KR/a9lh-to-b9s.txt
+++ b/_pages/ko_KR/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
-
-If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
-{: .notice--warning}
이 페이지의 [마그넷](https://en.wikipedia.org/wiki/Magnet_URI_scheme) 링크를 사용하려면
[Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
-{: .notice--success}
+
+If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
+{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ko_KR/cart-update.txt b/_pages/ko_KR/cart-update.txt
index 7359a0c7da..7f99fdb9a4 100644
--- a/_pages/ko_KR/cart-update.txt
+++ b/_pages/ko_KR/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
모든 게임 카드에는 실행에 필요한 시스템 버전이 포함되어 있어, 기기의 버전이 그보다 낮을 경우 게임 카드를 이용해 (인터넷 연결 없이도) 업데이트를 할 수 있습니다.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. 게임 카드 업데이트는 닌텐도 3DS 사운드와 네트워크 관련 기능(데이터 이사, 인터넷 브라우저, 엇갈림 광장 또는 e숍 등)에는 적용되지 않습니다.
-
+
이것은 닌텐도 3DS 사운드의 구버전을 포함하는 버전의 기기 *(<7.0.0의 미국, 유럽, 일본및 한국 지역)* 에서 게임 카드 업데이트가 [Soundhax](homebrew-launcher-(soundhax))를 불가능하게 만드는 것을 의미합니다! 홈브류 런처 접속에 [대안](homebrew-launcher-(alternatives))이 필요할 것입니다!
+
+이것은 또한 게임 카드 업데이트를 하더라도 브라우저가 미설치되어 있다면 브라우저는 설치되지 않는다는 것을 의미합니다. **오직** 시스템 버전만 업데이트됩니다. *(예: 2.1.0-0 -> 6.0.0-0)*. 마지막 숫자 *(-0)* 는 변하지 **않습니다.**
{% endcapture %}
{{ notice-1 | markdownify }}
-이것은 또한 게임 카드 업데이트를 하더라도 브라우저가 미설치되어 있다면 브라우저는 설치되지 않는다는 것을 의미합니다. **오직** 시스템 버전만 업데이트됩니다. *(예: 2.1.0-0 -> 6.0.0-0)*. 마지막 숫자 *(-0)* 는 변하지 **않습니다.**
-{: .notice--warning}
-
**9.9.0 이하의 버전에서 게임 카드 업데이트는 표준 온라인 업데이트가 될 때까지 브라우저를 제거합니다!**
{: .notice--danger}
diff --git a/_pages/ko_KR/credits.txt b/_pages/ko_KR/credits.txt
index d9d089980e..073c696c93 100644
--- a/_pages/ko_KR/credits.txt
+++ b/_pages/ko_KR/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
목록에서 누락된 경우 연락 주시면 추가하겠습니다.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/ko_KR/f3-(linux).txt b/_pages/ko_KR/f3-(linux).txt
index b43eee9819..d59a124ebf 100644
--- a/_pages/ko_KR/f3-(linux).txt
+++ b/_pages/ko_KR/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
이 섹션은 F3를 사용해 SD 카드의 오류를 확인하는 추가 섹션입니다.
-{: .notice--info}
SD 카드의 용량과 컴퓨터의 속도에 따라 최대 몇 시간이 걸릴 수 있습니다!
-{: .notice--info}
이 페이지는 Linux 사용자를 위한 페이지입니다. Linux 사용자가 아니라면 [H2testw (windows)](h2testw-(windows)) 또는 [F3X (mac)](f3x-(mac)) 페이지를 참고해 주세요.
-{: .notice--info}
#### 준비물
diff --git a/_pages/ko_KR/f3x-(mac).txt b/_pages/ko_KR/f3x-(mac).txt
index 11149f3461..4f9957ebc6 100644
--- a/_pages/ko_KR/f3x-(mac).txt
+++ b/_pages/ko_KR/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
이 섹션은 F3X를 사용해 SD 카드의 오류를 확인하는 추가 섹션입니다.
-{: .notice--info}
SD 카드의 용량과 컴퓨터의 속도에 따라 최대 몇 시간이 걸릴 수 있습니다!
-{: .notice--info}
이 페이지는 Mac 사용자를 위한 페이지입니다. Mac 사용자가 아니라면 [H2testw (windows)](h2testw-(windows)) 또는 [F3 (Linux)](f3-(linux)) 페이지를 확인해 주세요.
-{: .notice--info}
#### 준비물
diff --git a/_pages/ko_KR/faq.txt b/_pages/ko_KR/faq.txt
index 208d178057..5ac0e41e15 100644
--- a/_pages/ko_KR/faq.txt
+++ b/_pages/ko_KR/faq.txt
@@ -6,53 +6,53 @@ title: "FAQ"
**Q:** *제 기기는 최신 버전인데 가능한가요?*
**A:** Yes
-
+
**Q:** * Luma3DS는 어떻게 업데이트하나요?*
**A:** Luma3DS Updater를 사용해 주세요.
-
+
**Q:** *Gateway나 Sky3DS 등을 사야 한다고 들었는데, 필요한가요?*
**A:** 아니요. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *Gateway에서 사용했던 저장 데이터를 어떻게 옮겨서 사용할 수 있나요?*
**A:** 이 [링크](https://gbatemp.net/threads/425743/)를 참고해 주세요.
-
+
**Q:** *이 가이드를 따라하려면 무엇이 필요한가요?*
**A:** 이 가이드는 무료 소프트웨어만 가지고도 완벽히 따라할 수 있습니다.
-
+
**Q:** *벽돌이 될 위험이 얼마나 큰가요?*
**A:** 진행 절차를 그대로 따른다면 벽돌이 될 위험은 *거의 없다*고 보장할 수 있습니다.
-
+
**Q:** *이걸로 엄청난 홈브류와 에뮬레이터를 실행할 수 있나요?*
**A:** 네! 커스텀 펌웨어는 홈브류 런처만 쓸 수 있게 해 주는 것이 아니라 모든 버전에서 해킹을 제공하므로, 업데이트를 하더라도 영원히 유지할 수 있습니다.
-
+
**Q:** *이걸로 다른 지역에서 발매된 게임을 즐길 수 있나요?*
**A:** Luma3DS는 지역 제한 해제 패치를 지원해 추가적인 절차 없이도 전 지역의 게임을 설치할 수 있게 해 줍니다.
-
+
**Q:** *커스텀 펌웨어 SysNAND를 업데이트해도 되나요?*
**A:** 네. 안전하니 그만 물어봐 주세요.
-
+
**Q:** *도움을 받으려면 어디로 가야 하나요?*
**A:** 지원이 필요하면 [Discord 닌텐도 홈브류](https://discord.gg/MWxPgEp)에 도움을 요청해 주세요.
-
+
**Q:** *사용 가능한 공간이 4GB 이하인 SD 카드로도 가능한가요?*
**A:** Yes!
-
+
**Q:** *총 용량이
128GB 이상인 SD 카드를 사용할 수 있나요?*
**A:** 네, 하지만 일부 사용자의 보고에 따르면 큰 용량의 SD 카드를 사용할 때 속도 저하가 있다고 합니다. exFAT 형식은 사용이 불가능하며 FAT32 형식으로 포맷해야 합니다.
-
+
**Q:** *이 가이드를 마치고 새 SD 카드로 옮길 수 있나요?*
**A:** 그냥 모든 파일을 새 SD 카드에 복사하면 됩니다.
-
+
**Q:** *NNID를 보존할 수 있나요?*
**A:** NNID가 있는 상태에서 시작을 해 모든 절차를 밟을 경우 그대로 유지가 됩니다.
-
+
**Q:** *데이터 이사는 계속 가능한가요?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *컴퓨터 없이도 작업을 할 수 있나요? (예를 들어 안드로이드 폰)*
**A:** SD 카드에 파일을 넣을 수만 있으면 됩니다!
-
+
**Q:** *도와주세요! 뭔가 잘못되었는지 시작이 안 돼요...*
**A:** [문제 해결 가이드](troubleshooting) 를 참고해 주세요.
diff --git a/_pages/ko_KR/file-extensions-(windows).txt b/_pages/ko_KR/file-extensions-(windows).txt
index 171d4d7f9f..eb2b776e6b 100644
--- a/_pages/ko_KR/file-extensions-(windows).txt
+++ b/_pages/ko_KR/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
이 섹션은 Windows에서 파일 확장자명을 숨기는 기본 설정을 변경하는 추가 섹션입니다.
-{: .notice--info}
이 작업은 가이드에 명시된 파일을 찾기 쉽게 해 줍니다.
-{: .notice--info}
#### Instructions
diff --git a/_pages/ko_KR/finalizing-setup.txt b/_pages/ko_KR/finalizing-setup.txt
index 3918276b68..4c6d956b91 100644
--- a/_pages/ko_KR/finalizing-setup.txt
+++ b/_pages/ko_KR/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### 단계별 개요
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
여기에서는 [AuroraWright](https://github.com/AuroraWright/)의 Luma3DS를 사용해 패치된 SysNAND를 부팅하므로 EmuNAND를 사용할 필요가 없으며, 해킹된 3DS의 사용을 크게 단순화시키고 사용되는 SD 카드의 공간도 절약할 수 있습니다.
-
+
이 과정을 진행하는 동안 다음 프로그램도 설치하게 됩니다:
+ **FBI** *(CIA 형식의 게임 및 애플리케이션 설치)*
@@ -18,10 +17,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
+ **Godmode9** *(NAND와 게임 카드의 기능을 수행할 수 있는 다목적 툴)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### 준비물
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-이제 Luma3DS Updater를 열고 (A)를 누르기만 하면 Luma3DS를 최신 버전으로 업데이트할 수 있습니다.
+이제 Luma3DS Updater를 열고 (A)를 누르기만 하면 Luma3DS를 최신 버전으로 업데이트할 수 있습니다.
+
이는 본체 업데이트와 다르며 오직 최신 버전의 Luma3DS 파일을 다운로드해서 압축을 풀어줍니다.
+
이는 SD 카드에 저장된 Luma3DS 파일만 업데이트 할 것입니다. SD 카드가 제거된 상태에서 기기를 시작하면 CTRNAND에 있는 버전이 실행됩니다.
{% endcapture %}
@@ -143,9 +140,13 @@ ___
{% capture notice-6 %}
이제 Luma3DS CFW SysNAND를 기본으로 시작할 것입니다.
+
앞으로 (Select)를 누른 채 기기를 부팅시키면 Luma3DS 설정 메뉴가 실행됩니다.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/ko_KR/flashing-ntrboot-(custom-firmware).txt b/_pages/ko_KR/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..2a0e69743c
--- /dev/null
+++ b/_pages/ko_KR/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### 준비물
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### 진행 방법
+
+##### 섹션 I - 준비 작업
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. 완료될 때까지 기다려 주세요.
+1. (B)를 눌러 메인 메뉴로 돌아가 주세요.
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. 완료될 때까지 기다려 주세요.
+1. (B)를 눌러 메인 메뉴로 돌아가 주세요.
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ko_KR/flashing-ntrboot-(powersaves).txt b/_pages/ko_KR/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/ko_KR/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/ko_KR/get-started-(new-3ds).txt b/_pages/ko_KR/get-started-(new-3ds).txt
index d3a8052588..be44e1526a 100644
--- a/_pages/ko_KR/get-started-(new-3ds).txt
+++ b/_pages/ko_KR/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-아래 표에서 본인 기기의 버전에 해당하는 페이지를 선택해 주세요.
-{: .notice--primary}
+아래 표에서 본인 기기의 버전에 해당하는 페이지를 선택해 주세요. "이상" 및 "이하" 란은 그 칸에 적힌 버전을 포함한다는 점을 참고해 주세요. 예를 들어, "9.0.0 이상 9.2.0 이하"는 9.0.0, 9.1.0및 9.2.0을 모두 포함합니다.
-"이상" 및 "이하" 란은 그 칸에 적힌 버전을 포함한다는 점을 참고해 주세요. 예를 들어, "9.0.0 이상 9.2.0 이하"는 9.0.0, 9.1.0및 9.2.0을 모두 포함합니다.
-{: .notice--info}
-
-시스템 버전의 마지막 숫자(-XX인 것)는 브라우저 버전을 나타냅니다. 최근 브라우저 버전은 이 가이드의 New 3DS에서 무의미합니다.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. 최근 브라우저 버전은 이 가이드의 New 3DS에서 무의미합니다.
[게임 팩 업데이트](cart-update)를 통해 같은 열에 나와 있는 상위 버전으로 업데이트한 뒤 그 버전에 해당하는 설치 방법을 진행하셔도 됩니다.
-{: .notice--info}
기기의 버전은 본체 설정에 어가서 위쪽 화면의 우측 하단에서 확인할 수 있습니다.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ title: "Get Started (New 3DS)"
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/ko_KR/get-started-(old-3ds).txt b/_pages/ko_KR/get-started-(old-3ds).txt
index c29fc66c09..204aedad89 100644
--- a/_pages/ko_KR/get-started-(old-3ds).txt
+++ b/_pages/ko_KR/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-아래 표에서 본인 기기의 버전에 해당하는 페이지를 선택해 주세요.
-{: .notice--primary}
+아래 표에서 본인 기기의 버전에 해당하는 페이지를 선택해 주세요. "이상" 및 "이하" 란은 그 칸에 적힌 버전을 포함한다는 점을 참고해 주세요. 예를 들어, "9.0.0 이상 9.2.0 이하"는 9.0.0, 9.1.0및 9.2.0을 모두 포함합니다.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). 버전이 -0이면 브라우저가 없으며, -0 이상의 숫자는 브라우저가 설치되어 있음을 나타냅니다.
-{% capture notice-1 %}
-표의 마지막 두 열은 기기 버전의 마지막 숫자를 나타내며 이를 통해 시스템에 설치된 브라우저의 버전을 유추하게 됩니다. 버전이 -0이면 브라우저가 없으며, -0 이상의 숫자는 브라우저가 설치되어 있음을 나타냅니다.
-
-"이상" 및 "이하" 란은 그 칸에 적힌 버전을 포함합니다. 예를 들어, "9.0.0 이상 9.2.0 이하"는 9.0.0, 9.1.0및 9.2.0을 모두 포함합니다.
-
"5.0.0-0U"의 경우 설치된 브라우저가 없으므로 "브라우저 없음" 열의 "5.0.0 이상 5.1.0 이하" 행을 선택하면 됩니다.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
[게임 팩 업데이트](cart-update)를 통해 같은 열에 나와 있는 상위 버전으로 업데이트한 뒤 그 버전에 해당하는 설치 방법을 진행하셔도 됩니다.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-게임 카드 업데이트는 시스템 설정, 홈 메뉴 등의 핵심 기능에만 적용된다는 점을 주의해 주세요. 게임 카드 업데이트는 닌텐도 3DS 사운드와 네트워크 관련 기능(데이터 이사, 인터넷 브라우저, 엇갈림 광장 또는 e숍 등)에는 적용되지 않습니다.
-
-이것은 닌텐도 3DS 사운드의 구버전을 포함하는 버전의 기기 *(<7.0.0의 미국, 유럽, 일본및 한국 지역)* 에서 게임 카드 업데이트가 [Soundhax](homebrew-launcher-(soundhax))를 불가능하게 만드는 것을 의미합니다! 홈브류 런처 접속에 [대안](homebrew-launcher-(alternatives))이 필요할 것입니다!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-9.9.0 이상의 버전을 담고 있는 게임 팩을 이용해 업데이트 한 경우에는 *(10.2.0-24와 같이 버전은 9.9.0 이상이지만 브라우저는 -25 이하일 경우)* 브라우저가 제거되어 "브라우저 없음" 열을 선택하셔야 합니다.
-{: .notice--warning}
기기의 버전은 본체 설정에 어가서 위쪽 화면의 우측 하단에서 확인할 수 있습니다.
-{: .notice--success}
{: .notice--info}
+9.9.0 이상의 버전을 담고 있는 게임 팩을 이용해 업데이트 한 경우에는 *(10.2.0-24와 같이 버전은 9.9.0 이상이지만 브라우저는 -25 이하일 경우)* 브라우저가 제거되어 "브라우저 없음" 열을 선택하셔야 합니다.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/ko_KR/get-started.txt b/_pages/ko_KR/get-started.txt
index 976ca57264..ebce3976dc 100644
--- a/_pages/ko_KR/get-started.txt
+++ b/_pages/ko_KR/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. 이 페이지는 어디서부터 시작해야 하는지를 안내합니다.
-사진에 나와 있는 기기의 색상이 다르더라도 버튼 배치와 형태를 신중하게 비교해 본인의 기기와 동일한 기기를 선택해 주세요.
-{: .notice}
-
-이미지를 클릭해 해당되는 페이지로 이동해 주세요.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. 이 페이지는 어디서부터 시작해야 하는지를 안내합니다.
-{: .notice--info}
+이미지를 클릭해 해당되는 페이지로 이동해 주세요. 사진에 나와 있는 기기의 색상이 다르더라도 버튼 배치와 형태를 신중하게 비교해 본인의 기기와 동일한 기기를 선택해 주세요.
EmuNAND 기반의 CFW 3DS를 보유한 경우 모든 과정을 SysNAND에 적용해 주세요. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-가이드의 이미지는 클릭하면 커진다는 점을 참고해 주세요.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
시작하기에 앞서, Windows 사용자는 [파일 확장자명 (Windows)](file-extensions-(windows)) 가이드를 이용해 파일 확장자명이 표시되게 해야 합니다!
{: .notice--info}
@@ -26,9 +17,6 @@ EmuNAND 기반의 CFW 3DS를 보유한 경우 모든 과정을 SysNAND에 적용
시작하기 전에 [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), 또는 [F3X (Mac)](f3x-(mac))을 사용해 SD 카드의 오류 여부를 확인해 주세요!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ko_KR/godmode9-usage.txt b/_pages/ko_KR/godmode9-usage.txt
index 44c3dc8031..894bcd973b 100644
--- a/_pages/ko_KR/godmode9-usage.txt
+++ b/_pages/ko_KR/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9은 닌텐도 3DS 콘솔의 완전한 파일 관리자이며, SD 카드와 SysNAND와 EmuNAND 안의 FAT 파티션에 접근하고 근본적인 것을 수정할 권한을 줍니다. 다른 기능로는 파일의 복사, 삭제, 이름 바꾸기와 폴더 만기 등이 있습니다.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
이것은 3DS 콘솔에서 사용할 수 있는 모든 시스템 데이터를 근본적으로 가능한 모든 수정을 할 수 있는 강력한 권한을 줍니다. 하지만 실수로 콘솔의 데이터를 손상하지 않도록 경고창이 뜹니다.
-
+
시스템 쓰기 권한 사용 시 경고창과 키 조합 입력 시스템 제공을 통해 시스템 손상을 막습니다. 모든 중요한 파일과 폴더을 덮어쓰거나 수정하는 것은 이러한 잠금 풀기 과정을 거쳐야 하며 실수로 잠금을 푸는 것은 불가능합니다. 항상 총명하게 생각하고, 백업을 생활하며, 안전을 추구해 주세요.
{% endcapture %}
diff --git a/_pages/ko_KR/h2testw-(windows).txt b/_pages/ko_KR/h2testw-(windows).txt
index 586ae57a10..026ce893aa 100644
--- a/_pages/ko_KR/h2testw-(windows).txt
+++ b/_pages/ko_KR/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
이 섹션은 h2testw를 사용해 SD 카드의 오류를 확인하는 추가 섹션입니다.
-{: .notice--info}
SD 카드의 용량과 컴퓨터의 속도에 따라 최대 몇 시간이 걸릴 수 있습니다!
-{: .notice--info}
이 페이지는 Windows 사용자만 이용할 수 있습니다. Windows 사용자가 아니라면 [F3 (linux)](f3-(linux)) 또는 [F3X (mac)](f3x-(mac)) 페이지를 참고해 주세요.
-{: .notice--info}
#### 준비물
diff --git a/_pages/ko_KR/home.txt b/_pages/ko_KR/home.txt
index ef369621c3..094a7ce7d5 100644
--- a/_pages/ko_KR/home.txt
+++ b/_pages/ko_KR/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**커스텀 펌웨어** ("CFW") 는 유저랜드 홈브류에서 쉽게 할 수 없는 고급 핵을 사용할 수 있게 해 줍니다. 예로, 서명 패치 (signature patches) 를 통해 서명되지 않은 타이틀을 설치해 홈 메뉴에 나타나게 할 수 있습니다.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## 이 가이드는 무엇을 설치하는 가이드입니까?
diff --git a/_pages/ko_KR/homebrew-launcher-(alternatives).txt b/_pages/ko_KR/homebrew-launcher-(alternatives).txt
index 43d820d599..dbf899786d 100644
--- a/_pages/ko_KR/homebrew-launcher-(alternatives).txt
+++ b/_pages/ko_KR/homebrew-launcher-(alternatives).txt
@@ -3,14 +3,11 @@ title: "Homebrew Launcher (Alternatives)"
---
홈브류 런처는 다양한 방법을 통해 실행할 수 있습니다.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. 무선 통신은 켜져 있기만 하면 됩니다.
인터넷 접속은 필요하지 않습니다.
-{: .notice--info}
#### 준비 사항
diff --git a/_pages/ko_KR/homebrew-launcher-(soundhax).txt b/_pages/ko_KR/homebrew-launcher-(soundhax).txt
index 6c31292815..37852b3f61 100644
--- a/_pages/ko_KR/homebrew-launcher-(soundhax).txt
+++ b/_pages/ko_KR/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
홈브류 런처는 다양한 방법을 통해 실행할 수 있습니다.
-{: .notice--info}
Soundhax는 미국, 유럽, 일본, 한국 지역의 9.0.0~11.3.0 버전에서 사용이 가능합니다.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. 무선 통신은 켜져 있기만 하면 됩니다. 인터넷 접속은 필요하지 않습니다.
-{: .notice--info}
{% capture notice-1 %}
게임 카드 업데이트는 시스템 설정, 홈 메뉴 등의 핵심 기능에만 적용된다는 점을 주의해 주세요. 게임 카드 업데이트는 닌텐도 3DS 사운드와 네트워크 관련 기능(데이터 이사, 인터넷 브라우저, 엇갈림 광장 또는 e숍 등)에는 적용되지 않습니다.
-
+
이것은 닌텐도 3DS 사운드의 구버전을 포함하는 버전의 기기 *(<7.0.0의 미국, 유럽, 일본및 한국 지역)* 에서 게임 카드 업데이트가 [Soundhax](homebrew-launcher-(soundhax))를 불가능하게 만드는 것을 의미합니다! 홈브류 런처 접속에 [대안](homebrew-launcher-(alternatives))이 필요할 것입니다!
{% endcapture %}
diff --git a/_pages/ko_KR/installing-boot9strap-(browser).txt b/_pages/ko_KR/installing-boot9strap-(browser).txt
index 267a8c1cdc..d550571460 100644
--- a/_pages/ko_KR/installing-boot9strap-(browser).txt
+++ b/_pages/ko_KR/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
이 설명은 SysNAND를 기준으로 제작되었으므로 기기가 EmuNAND 기반이라면 모든 과정을 SysNAND에 적용해 주세요. EmuNAND와 RedNAND는 [동일한 개념](http://3dbrew.org/wiki/NAND_Redirection)을 다른 방식으로 구현한 것입니다.
-{: .notice--info}
#### 준비물
diff --git a/_pages/ko_KR/installing-boot9strap-(dsiware).txt b/_pages/ko_KR/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/ko_KR/installing-boot9strap-(dsiware).txt
+++ b/_pages/ko_KR/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/ko_KR/installing-boot9strap-(dsiware-game-injection).txt b/_pages/ko_KR/installing-boot9strap-(dsiware-game-injection).txt
index c2adefc583..47ccadf8d8 100644
--- a/_pages/ko_KR/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/ko_KR/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,20 +3,20 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
이 페이지의 [마그넷](https://en.wikipedia.org/wiki/Magnet_URI_scheme) 링크를 사용하려면
[Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### 준비물
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/ko_KR/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/ko_KR/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/ko_KR/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/ko_KR/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/ko_KR/installing-boot9strap-(dsiware-save-injection).txt b/_pages/ko_KR/installing-boot9strap-(dsiware-save-injection).txt
index b7dc362c66..80c7cae15e 100644
--- a/_pages/ko_KR/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/ko_KR/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,23 +3,20 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
이 페이지의 [마그넷](https://en.wikipedia.org/wiki/Magnet_URI_scheme) 링크를 사용하려면
[Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### 준비물
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/ko_KR/installing-boot9strap-(hardmod).txt b/_pages/ko_KR/installing-boot9strap-(hardmod).txt
index 9ca75c359e..cbbe7e3d73 100644
--- a/_pages/ko_KR/installing-boot9strap-(hardmod).txt
+++ b/_pages/ko_KR/installing-boot9strap-(hardmod).txt
@@ -3,17 +3,13 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
이 페이지의 [마그넷](https://en.wikipedia.org/wiki/Magnet_URI_scheme) 링크를 사용하려면
[Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### 준비물
diff --git a/_pages/ko_KR/installing-boot9strap-(homebrew-launcher).txt b/_pages/ko_KR/installing-boot9strap-(homebrew-launcher).txt
index c821bbb632..e74defc34a 100644
--- a/_pages/ko_KR/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/ko_KR/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
이 설명은 SysNAND를 기준으로 제작되었으므로 기기가 EmuNAND 기반이라면 모든 과정을 SysNAND에 적용해 주세요. EmuNAND와 RedNAND는 [동일한 개념](http://3dbrew.org/wiki/NAND_Redirection)을 다른 방식으로 구현한 것입니다.
-{: .notice--info}
#### 진행 방법
@@ -20,6 +19,8 @@ title: "Installing boot9strap (Homebrew Launcher)"
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ 재생중 화면이 멈출 경우 전원 버튼을 길게 눌러서 기기를 강제로 종료시킨 후 다시 시도해 주세요.
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/ko_KR/installing-boot9strap-(mset).txt b/_pages/ko_KR/installing-boot9strap-(mset).txt
index 5dde3bf902..3f74e52dda 100644
--- a/_pages/ko_KR/installing-boot9strap-(mset).txt
+++ b/_pages/ko_KR/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
이 설명은 SysNAND를 기준으로 제작되었으므로 기기가 EmuNAND 기반이라면 모든 과정을 SysNAND에 적용해 주세요. EmuNAND와 RedNAND는 [동일한 개념](http://3dbrew.org/wiki/NAND_Redirection)을 다른 방식으로 구현한 것입니다.
-{: .notice--info}
#### 준비물
diff --git a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..2181a8a030
--- /dev/null
+++ b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### 준비물
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* 최신 버전의 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 파일)*
+* 홈브류 [스타터 킷](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### 진행 방법
+
+##### 섹션 I - 준비 작업
+
+1. 기기를 종료해 주세요.
+1. SD 카드를 컴퓨터에 삽입해 주세요.
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. SD 카드를 기기에 다시 삽입해 주세요.
+1. 기기를 시작해 주세요.
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. 기기를 종료해 주세요.
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. SD 카드를 컴퓨터에 삽입해 주세요.
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. SD 카드를 기기에 다시 삽입해 주세요.
+1. 기기를 시작해 주세요.
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요.
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. 완료될 때까지 기다려 주세요.
+1. (B)를 눌러 메인 메뉴로 돌아가 주세요.
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/ko_KR/move-emunand.txt b/_pages/ko_KR/move-emunand.txt
index 348beedbf4..6abd144d1b 100644
--- a/_pages/ko_KR/move-emunand.txt
+++ b/_pages/ko_KR/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
이 페이지는 이전 EmuNAND의 데이터를 새로운 CFW SysNAND로 옮기고 이전 EmuNAND 파티션을 제거하는 방법을 안내하는 부가 섹션입니다. EmuNAND와 RedNAND는 [동일한 개념](http://3dbrew.org/wiki/NAND_Redirection)을 다른 방식으로 구현한 것입니다.
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/ko_KR/ntr-and-cubic-ninja.txt b/_pages/ko_KR/ntr-and-cubic-ninja.txt
index 3a5f11e9aa..cfa37fd5d8 100644
--- a/_pages/ko_KR/ntr-and-cubic-ninja.txt
+++ b/_pages/ko_KR/ntr-and-cubic-ninja.txt
@@ -4,9 +4,8 @@ title: "NTR and Cubic Ninja"
이 페이지의 [마그넷](https://en.wikipedia.org/wiki/Magnet_URI_scheme) 링크를 사용하려면
[Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
-{: .notice--success}
-**NTR Cubic Ninja는 일본 New 3DS에서만 작동합니다!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### 준비물
diff --git a/_pages/ko_KR/ntrboot.txt b/_pages/ko_KR/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/ko_KR/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/ko_KR/region-changing.txt b/_pages/ko_KR/region-changing.txt
index f1886cd835..a06e57d287 100644
--- a/_pages/ko_KR/region-changing.txt
+++ b/_pages/ko_KR/region-changing.txt
@@ -3,17 +3,13 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. 바꾸고자 하는 지역의 9.2.0 CTRTransfer 이미지를 설치해 끝납니다.
-{: .notice--primary}
-**Luma3DS에서는 [타이틀별 지역 에뮬레이션](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage)이 가능해지면서 지역 변경할 필요는 별로 없어졌습니다.**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
이 페이지의 [마그넷](https://en.wikipedia.org/wiki/Magnet_URI_scheme) 링크를 사용하려면
[Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
이 작업을 진행하면 NNID가 더이상 시스템과 호환되지 않아 연결이 해제됩니다. NNID는 이를 생성한 기기의 지역에 종속되며 [매우 복잡하고 어려운 과정](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt) 없이는 다른 지역의 기기에 등록할 수 없습니다.
{: .notice--warning}
@@ -22,19 +18,14 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
{: .notice--warning}
간혹 e숍 접속이 가능해야 하는 기기임에도 알 수 없는 이유로 이용이 불가능한 경우도 있음을 참고해 주세요. 이는 전적으로 닌텐도의 서버와 연관된 문제로
- 어쩔 수가 없습니다.
-{: .notice--warning}
-
-위 경고와 마찬가지로, 때때로 e숍이 일부 기기에서 기기에 맞지 않게 작동할 (일부 New 3DS와 같은) 것이라는 점을 참고해 주세요. 이 현상의 원인은 아직 밝혀지지 않았습니다.
-{: .notice--warning}
+ 어쩔 수가 없습니다. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). 이 현상의 원인은 아직 밝혀지지 않았습니다.
(이 가이드에 명시된) CTRTransfer를 이용한 지역 변경은 재부팅 패치를 사용할 수 없게 만드는 듯합니다. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### 준비물
diff --git a/_pages/ko_KR/site-navigation.txt b/_pages/ko_KR/site-navigation.txt
index 1f7de5737d..264d3c392a 100644
--- a/_pages/ko_KR/site-navigation.txt
+++ b/_pages/ko_KR/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [자주 묻는 질문](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [시작하기 (New 3DS)](get-started-(new-3ds))
+ [시작하기 (Old 3DS)](get-started-(old-3ds))
+ [시작하기](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [EmuNAND기반 데이터 이동](move-emunand)
+ [NTR 및 Cubic Ninja](ntr-and-cubic-ninja)
+ [지역 변경](region-changing)
diff --git a/_pages/ko_KR/troubleshooting.txt b/_pages/ko_KR/troubleshooting.txt
index c9f7796c57..6aaa12d5a2 100644
--- a/_pages/ko_KR/troubleshooting.txt
+++ b/_pages/ko_KR/troubleshooting.txt
@@ -4,14 +4,11 @@ title: "Troubleshooting"
기기를 시작할 수 없을 경우 관련 섹션을 찾아서 지시사항을 따라 주세요. 문제가 해결되었을 경우 메인 가이드를 따라 계속 진행하면 됩니다.
(이 섹션은 꽤 깁니다. Ctrl+F 단축키를 사용해 해결방안을 찾아주세요)
-{: .notice--primary}
-**문제를 해결하지 못 해 도움을 요청해야 하는 경우 SD 카드 최상위 경로에서 문제와 관련된 모든 .log 파일의 내용을 [Gist](https://gist.github.com/)에 붙여넣고 겪은 문제와 시도해 본 방법에 대한 자세한 설명을 준비해 주세요.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
이 페이지의 [마그넷](https://en.wikipedia.org/wiki/Magnet_URI_scheme) 링크를 사용하려면
[Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
-{: .notice--success}
## 가이드 완료 뒤 DSi / DS 기능이 작동하지 않습니다.
diff --git a/_pages/ko_KR/uninstall-cfw.txt b/_pages/ko_KR/uninstall-cfw.txt
index 55224630ac..0e1dbe90cd 100644
--- a/_pages/ko_KR/uninstall-cfw.txt
+++ b/_pages/ko_KR/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### 준비물
diff --git a/_pages/ko_KR/updating-b9s.txt b/_pages/ko_KR/updating-b9s.txt
index 769bb685f9..fb1a569dd3 100644
--- a/_pages/ko_KR/updating-b9s.txt
+++ b/_pages/ko_KR/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ms_MY/9.2.0-ctrtransfer.txt b/_pages/ms_MY/9.2.0-ctrtransfer.txt
index 311e83669c..202ec2fd63 100644
--- a/_pages/ms_MY/9.2.0-ctrtransfer.txt
+++ b/_pages/ms_MY/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/ms_MY/a9lh-to-b9s.txt b/_pages/ms_MY/a9lh-to-b9s.txt
index f0a0cec52a..d26891aad9 100644
--- a/_pages/ms_MY/a9lh-to-b9s.txt
+++ b/_pages/ms_MY/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ms_MY/cart-update.txt b/_pages/ms_MY/cart-update.txt
index 0bad7e0f3b..61e0a71239 100644
--- a/_pages/ms_MY/cart-update.txt
+++ b/_pages/ms_MY/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
Semua game kart yang mempunyai salinan keperluan versi sistem untuk memainkannya, membolehkan semua versi rendah menggunakannya bagi kemaskini kepada versinya (walaupun tanpa penggunaan internet).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+Ini juga bermakna kemaskini kart TIDAK akan memasang browser jika anda tidak pernah mempunyainya. Ini **hanya** mengemas kini versi sistem sebenarnya *(sebagai contoh, 2.1.0-0 -> 6.0.0-0)*. Nombor terakhir *(-0)* **tidak** akan ditukar.
{% endcapture %}
{{ notice-1 | markdownify }}
-Ini juga bermakna kemaskini kart TIDAK akan memasang browser jika anda tidak pernah mempunyainya. Ini **hanya** mengemas kini versi sistem sebenarnya *(sebagai contoh, 2.1.0-0 -> 6.0.0-0)*. Nombor terakhir *(-0)* **tidak** akan ditukar.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/ms_MY/credits.txt b/_pages/ms_MY/credits.txt
index b7552fec72..6d0473a199 100644
--- a/_pages/ms_MY/credits.txt
+++ b/_pages/ms_MY/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
Jika nama anda tiada disenarai, hubungi saya dan saya akan tambahkan nama anda.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/ms_MY/f3-(linux).txt b/_pages/ms_MY/f3-(linux).txt
index d8c6ad2b72..8f190f6f4d 100644
--- a/_pages/ms_MY/f3-(linux).txt
+++ b/_pages/ms_MY/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Proses ini boleh mengambil masa selama beberapa jam, bergantung kepada saiz kad SD dan kelajuan komputer anda!
-{: .notice--info}
Laman ini hanya untuk pengguna Linux sahaja. Jika anda tidak berada di Linux, lihat halaman [H2testw (windows)](h2testw-(windows)) atau [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Apa yang ada perlukan
diff --git a/_pages/ms_MY/f3x-(mac).txt b/_pages/ms_MY/f3x-(mac).txt
index 91b0828d9e..3194ebacbe 100644
--- a/_pages/ms_MY/f3x-(mac).txt
+++ b/_pages/ms_MY/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Proses ini boleh mengambil masa selama beberapa jam, bergantung kepada saiz kad SD dan kelajuan komputer anda!
-{: .notice--info}
Laman ini adalah untuk pengguna Mac sahaja. Jika anda tidak berada di Mac, lihat halaman [H2testw (windows)](h2testw-(windows)) atau [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### Apa yang ada perlukan
diff --git a/_pages/ms_MY/faq.txt b/_pages/ms_MY/faq.txt
index 45cdbb12cd..6fbe16c9a2 100644
--- a/_pages/ms_MY/faq.txt
+++ b/_pages/ms_MY/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *Saya berada di versi sistem terkini, adakah peranti saya boleh diubahsuai?*
**A:** Yes
-
+
**Q:** *Bagaimana cara mengemas kini Luma3DS?*
**A:** Gunakan Luma3DS Updater
-
+
**Q:** *Saya dengar mengenai perkara yang perlu dibayar (Gateway, Sky3DS, dan sebagainya), adakah ianya satu keperluan?*
**A:** Tidak. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *Bagaimana saya hendak memindahkan saves yang sedia ada dari Gateway kepada peranti yang sudah dipasang games?*
**A:** lihat [disini](https://gbatemp.net/threads/425743/)
-
+
**Q:** *Apakah yang saya perlukan untuk mengikuti panduan ini?*
** A: ** Panduan ini boleh dilakukan dengan perisian percuma
-
+
**Q:** *Apakah risiko ubah suai peranti saya?*
**A:** Bricks sekarang *pada dasarnya* mustahil melainkan anda mengabaikan semua pemeriksaan keselamatan.
-
+
**Q:** *Boleh saya gunakan homebrew dan emulator dengan ini?*
**A:** Ya! Custom Firmware bukan hanya membolehkan anda menggunakan Homebrew Launcher, tetapi ianya juga boleh memberikan anda pengubahsuaian versi, kemudian anda akan simpan selamanya, walaupun dengan kemaskini.
-
+
**Q:** *Bolehkah saya bermain games dari luar kawasan?*
**A:** Luma3DS meyokong semua kawasan, yang memberi pengguna kelebihan untuk memasang games dari mana-mana kawasan tanpa modifikasi lebih atau langkah.
-
+
**Q:** *Adakah selamat untuk kemaskini CFW SysNAND?*
**A:** Ya. Ini selamat, berhenti tanya mengenainya.
-
+
**Q:** *Dimana patut saya pergi untuk bantuan?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Bolehkah saya lakukan dengan 4GB (atau lebih kecil) kad SD?*
**A:** Ya!
-
+
**Q:** *Bolehkah saya guna 128 GB (atau lebih besar) kad SD?*
**A:** Ya, tetapi sesetengah pengguna melaporkan kelajuan yang perlahan ketika menggunakan saiz yang besar. Perhatian bahawa anda tidak boleh format kad dengan exFAT; anda perlu fomat ia dengan FAT32.
-
+
**Q:** *Bagaimana cara untuk memindah ke kad SD baru selepas selesai?*
**A:** Hanya perlu salin semua fail dan letakkan ke kad SD baharu.
-
+
**Q:** *Bolehkah saya simpan NNID?*
**A:** Jika anda mula dengan NNID dan mengikut setiap langkah, anda akan mengakhiri dengan menyimpan NNID anda.
-
+
**Q:** *Bagaimana pula System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Bagaimana saya hendak melakukan tanpa komputer (seperti telefon Android)?*
**A:** Semua yang anda perlukan ialah keupayaan untuk meletakkan fail pada kad SD!
-
+
**Q:** *Tolong! Sesuatu buruk berlaku dan sekarang tidak boleh boot...*
**A:** Sila lihat [panduan penyelesaian](troubleshooting).
diff --git a/_pages/ms_MY/file-extensions-(windows).txt b/_pages/ms_MY/file-extensions-(windows).txt
index dc77ae1c3d..2b00b8133b 100644
--- a/_pages/ms_MY/file-extensions-(windows).txt
+++ b/_pages/ms_MY/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Arahan
diff --git a/_pages/ms_MY/finalizing-setup.txt b/_pages/ms_MY/finalizing-setup.txt
index e06038422d..62f66602b6 100644
--- a/_pages/ms_MY/finalizing-setup.txt
+++ b/_pages/ms_MY/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Gambaran keseluruhan panduan
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
Dalam kes ini, kita menggunakan Luma3DS dari [AuroraWright](https://github.com/AuroraWright/) untuk boot SysNAND yang ditampal secara terus, membolehkan kita sepenuhnya melepasi keperluan apa-apa jenis EmuNAND, lalu memudahkan penggunaan 3DS yang diubah suai dalam menjimatkan ruang kad SD.
-
+
Semasa proses ini, kami juga akan memasang program-program berikut:
+ **FBI** *(pemasangan CIA formatted games dan aplikasi)*
@@ -18,10 +17,6 @@ Semasa proses ini, kami juga akan memasang program-program berikut:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Apa yang ada perlukan
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-Anda kini boleh menggunakan Luma3DS Updater untuk mengemaskini Luma3DS anda kepada versi terkini hanya dengan membukanya dan menekan (A).
+Anda kini boleh menggunakan Luma3DS Updater untuk mengemaskini Luma3DS anda kepada versi terkini hanya dengan membukanya dan menekan (A).
+
Ini bukanlah perkara yang sama seperti kemas kini sistem; Ia hanya muat turun dan memasang fail Luma3DS yang terbaru.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
Anda kini boleh menahan butang (Select) ketika boot untuk melancarkan menu konfigurasi Luma3DS.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/ms_MY/flashing-ntrboot-(custom-firmware).txt b/_pages/ms_MY/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..3acfd8bfda
--- /dev/null
+++ b/_pages/ms_MY/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Apa yang ada perlukan
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Arahan
+
+##### Seksyen 1 - Persediaan
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Tunggu sehingga proses selesai
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Tunggu sehingga proses selesai
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ms_MY/flashing-ntrboot-(powersaves).txt b/_pages/ms_MY/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/ms_MY/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/ms_MY/get-started-(new-3ds).txt b/_pages/ms_MY/get-started-(new-3ds).txt
index 68c19eb47a..57558eecdd 100644
--- a/_pages/ms_MY/get-started-(new-3ds).txt
+++ b/_pages/ms_MY/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Pilih halaman yang sesuatu untuk versi anda berdasarkan carta dibawah.
-{: .notice--primary}
+Pilih halaman yang sesuatu untuk versi anda berdasarkan carta dibawah. Note that the "from" and "to" fields are inclusive. Ini bermakna, sebagai contoh, "barisan melintang dari 9.0.0 hingga 9.2.0" termasuk juga 9.0.0, 9.1.0 dan 9.2.0.
-Note that the "from" and "to" fields are inclusive. Ini bermakna, sebagai contoh, "barisan melintang dari 9.0.0 hingga 9.2.0" termasuk juga 9.0.0, 9.1.0 dan 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/ms_MY/get-started-(old-3ds).txt b/_pages/ms_MY/get-started-(old-3ds).txt
index 0a0231ea76..45cd2d5bf8 100644
--- a/_pages/ms_MY/get-started-(old-3ds).txt
+++ b/_pages/ms_MY/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Pilih halaman yang sesuai untuk versi anda berdasarkan carta dibawah.
-{: .notice--primary}
+Pilih halaman yang sesuai untuk versi anda berdasarkan carta dibawah. Note that the "from" and "to" fields are inclusive. Ini bermakna, sebagai contoh, "dari 9.0.0 hingga 9.2.0" termasuk 9.0.0, 9.1.0 dan 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Jika versinya ialah -0 anda tidak mempunyai browser, manakala jika ada ternampak apa-apa nombor atas -0 ia menunjukkan browser sudah dipasang.
-{% capture notice-1 %}
-Dua barisan melintang terakhir di dalam carta menunjukkan nombor terakhir versi anda (berdasarkan versi browser yang terpasang pada sistem). Jika versinya ialah -0 anda tidak mempunyai browser, manakala jika ada ternampak apa-apa nombor atas -0 ia menunjukkan browser sudah dipasang.
-
-Ruangan "dari" dan "hingga" adalah merangkumi semua. Ini bermakna, sebagai contoh, "dari 9.0.0 hingga 9.2.0" termasuk 9.0.0, 9.1.0 dan 9.2.0.
-
Sebagai contoh didalam kes "5.0.0-0U", anda akan mengikuti barisan melintang "Tiada Browser" dan barisan 5.0.0 hingga 5.1.0 kerana ianya berada di lingkungan versi sistem dan tiada browser dipasang.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Jika anda mengemas kini game kart yang mengandungi versi 9.9.0 atau lebih *(bermaksud anda ada versi 9.9.0 atau lebih, tetapi pelayar web anda berada di -25 atau rendah, seperti 10.2.0-24)*, pelayar web anda telah dibuang dan anda perlu menggunakan baris melintang "Tiada pelayar web".
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+Jika anda mengemas kini game kart yang mengandungi versi 9.9.0 atau lebih *(bermaksud anda ada versi 9.9.0 atau lebih, tetapi pelayar web anda berada di -25 atau rendah, seperti 10.2.0-24)*, pelayar web anda telah dibuang dan anda perlu menggunakan baris melintang "Tiada pelayar web".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/ms_MY/get-started.txt b/_pages/ms_MY/get-started.txt
index eb3915e5b1..e1c0ba68b4 100644
--- a/_pages/ms_MY/get-started.txt
+++ b/_pages/ms_MY/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Halaman ini akan membantu anda untuk mencari dimana bermula bagi peranti anda.
-Warna peranti didalam gambar mungkin berbeza, tapi perhatikan tempat butang dan ciri-ciri setiap peranti dengan teliti untuk memastikan anda memilih dengan betul.
-{: .notice}
-
-Klik gambar peranti anda untuk membawa anda ke halaman yang sesuai.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. Halaman ini akan membantu anda untuk mencari dimana bermula bagi peranti anda.
-{: .notice--info}
+Klik gambar peranti anda untuk membawa anda ke halaman yang sesuai. Warna peranti didalam gambar mungkin berbeza, tapi perhatikan tempat butang dan ciri-ciri setiap peranti dengan teliti untuk memastikan anda memilih dengan betul.
Jika anda sudah mengubah suai 3DS sebelum ni dan mempunyai EmuNAND berdasarkan pemasangan CFW, sila ikut semua langkah semasa di SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Sebelum bermula, sila pastikan kad SD anda tiada sebarang kerosakkan dengan menggunakan [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), atau [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ms_MY/godmode9-usage.txt b/_pages/ms_MY/godmode9-usage.txt
index ee187ceb03..09b9c99c31 100644
--- a/_pages/ms_MY/godmode9-usage.txt
+++ b/_pages/ms_MY/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/ms_MY/h2testw-(windows).txt b/_pages/ms_MY/h2testw-(windows).txt
index bdac681e6c..76add50db4 100644
--- a/_pages/ms_MY/h2testw-(windows).txt
+++ b/_pages/ms_MY/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Bergantung kepada saiz kad SD dan kelajuan komputer anda, proses ini boleh mengambil masa selama beberapa jam!
-{: .notice--info}
Laman ini hanya untuk pengguna Windows sahaja. Jika anda tidak berada di windows, lihat halaman [F3 (linux)](f3-(linux)) atau [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Apa yang ada perlukan
diff --git a/_pages/ms_MY/home.txt b/_pages/ms_MY/home.txt
index c6d0a39033..78ad950a30 100644
--- a/_pages/ms_MY/home.txt
+++ b/_pages/ms_MY/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") membolehkan anda lebih mengubah suai dimana homebrew tidak boleh lakukan. Sebagai contoh, signature patches membolehkan anda untuk memamasang unsigned titles yang keluar pada kanan Menu HOME anda.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Apa yang panduan ini akan memasang?
diff --git a/_pages/ms_MY/homebrew-launcher-(alternatives).txt b/_pages/ms_MY/homebrew-launcher-(alternatives).txt
index f80264f1a9..ff64cf91e3 100644
--- a/_pages/ms_MY/homebrew-launcher-(alternatives).txt
+++ b/_pages/ms_MY/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
Homebrew Launcher mempunyai pelbagai cara masuk, atau cara melancarkannya.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
### Apa yang anda perlukan
diff --git a/_pages/ms_MY/homebrew-launcher-(soundhax).txt b/_pages/ms_MY/homebrew-launcher-(soundhax).txt
index ecfd1536d0..ea61f0facc 100644
--- a/_pages/ms_MY/homebrew-launcher-(soundhax).txt
+++ b/_pages/ms_MY/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Homebrew Launcher mempunyai pelbagai cara masuk, atau cara melancarkannya.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/ms_MY/installing-boot9strap-(browser).txt b/_pages/ms_MY/installing-boot9strap-(browser).txt
index d34ab5a343..c30baf66cf 100644
--- a/_pages/ms_MY/installing-boot9strap-(browser).txt
+++ b/_pages/ms_MY/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Sila ambil perhatian terma EmuNAND dan RedNAND mungkin berbeza sedikit dari cara perlaksanaannya akan tetapi [sama konsepnya](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Apa yang ada perlukan
diff --git a/_pages/ms_MY/installing-boot9strap-(dsiware).txt b/_pages/ms_MY/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/ms_MY/installing-boot9strap-(dsiware).txt
+++ b/_pages/ms_MY/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/ms_MY/installing-boot9strap-(dsiware-game-injection).txt b/_pages/ms_MY/installing-boot9strap-(dsiware-game-injection).txt
index ec8334cc43..20d6e5d0df 100644
--- a/_pages/ms_MY/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/ms_MY/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Apa yang ada perlukan
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/ms_MY/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/ms_MY/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/ms_MY/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/ms_MY/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/ms_MY/installing-boot9strap-(dsiware-save-injection).txt b/_pages/ms_MY/installing-boot9strap-(dsiware-save-injection).txt
index f1f3f336fe..68f1681a16 100644
--- a/_pages/ms_MY/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/ms_MY/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Apa yang ada perlukan
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/ms_MY/installing-boot9strap-(hardmod).txt b/_pages/ms_MY/installing-boot9strap-(hardmod).txt
index 43aa546b4e..e213ecd392 100644
--- a/_pages/ms_MY/installing-boot9strap-(hardmod).txt
+++ b/_pages/ms_MY/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### Apa yang ada perlukan
diff --git a/_pages/ms_MY/installing-boot9strap-(homebrew-launcher).txt b/_pages/ms_MY/installing-boot9strap-(homebrew-launcher).txt
index eb429d2ed2..272f24fedc 100644
--- a/_pages/ms_MY/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/ms_MY/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Sila ambil perhatian terma EmuNAND dan RedNAND mungkin berbeza sedikit dari cara perlaksanaannya akan tetapi [sama konsepnya](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Arahan
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Jika ia beku, anda boleh memaksa power off peranti anda dengan menahan butang power, kemudian cuba lagi
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/ms_MY/installing-boot9strap-(mset).txt b/_pages/ms_MY/installing-boot9strap-(mset).txt
index 77c513d7bb..61b4aee6b9 100644
--- a/_pages/ms_MY/installing-boot9strap-(mset).txt
+++ b/_pages/ms_MY/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Sila ambil perhatian terma EmuNAND dan RedNAND mungkin berbeza sedikit dari cara perlaksanaannya akan tetapi [sama konsepnya](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Apa yang ada perlukan
diff --git a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..233387d41e
--- /dev/null
+++ b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Apa yang ada perlukan
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+*Keluaran terkini [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(fail `.7z`)*
+* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Arahan
+
+##### Seksyen 1 - Persediaan
+
+1. Power off your device
+1. Pasang kad SD anda ke dalam komputer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Pasang kad SD anda ke dalam komputer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Tekan (Start) untuk save dan reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Tunggu sehingga proses selesai
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/ms_MY/move-emunand.txt b/_pages/ms_MY/move-emunand.txt
index 4fdae6cc7a..6fa7c231b3 100644
--- a/_pages/ms_MY/move-emunand.txt
+++ b/_pages/ms_MY/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Sila ambil perhatian terma EmuNAND dan RedNAND mungkin berbeza sedikit dari cara perlaksanaannya akan tetapi [sama konsepnya](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/ms_MY/ntr-and-cubic-ninja.txt b/_pages/ms_MY/ntr-and-cubic-ninja.txt
index 0a2ee69ad8..f9b0a2364f 100644
--- a/_pages/ms_MY/ntr-and-cubic-ninja.txt
+++ b/_pages/ms_MY/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja hanya untukNew 3DS JPN SAHAJA!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Apa yang ada perlukan
diff --git a/_pages/ms_MY/ntrboot.txt b/_pages/ms_MY/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/ms_MY/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/ms_MY/region-changing.txt b/_pages/ms_MY/region-changing.txt
index eb0393ecb7..8752c54aca 100644
--- a/_pages/ms_MY/region-changing.txt
+++ b/_pages/ms_MY/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Penukaran kawasan mungkin tidak perlu memandangkan Luma3DS menyokong games luar dari kawasan dan individu [emulasi kawasan](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Proses ini juga akan memisahkan NNID anda dari sistem, memandangkan ianya tidak lagi serasi denganya. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Proses ini juga akan memisahkan NNID anda dari sistem, memandangkan ianya tidak
Selepas proses ini, hanya **New 3DS yang tidak pernah menggunakan eShop sebelum ini** dan **mana-mana Old 3DS** akan dapat menggunakan eShop selepas mencipta NNID baru mengikut kawasan baru mereka. Penukaran kawasan New 3DS yang sudah menggunakan eShop mereka pada kawasan asal tidak boleh mencipta NNID baru dan penggunaan eShop pada kawasan yang baru!
{: .notice--warning}
-Perhatian bahawa kadang-kala eShop akan tidak berfungsi untuk peranti yang ia boleh gunakan. Ini semua bergantung pada server Nintendo, dan saya tiada kuasa untuk mengawalnya.
-{: .notice--warning}
-
-Sama seperti amaran diatas, kadang kala eShop tidak akan berfungsi untuk peranti yang tidak sepatutnya ada (untuk sesetengah New 3DS). Penyebab ini masih lagi tidak diketahui.
-{: .notice--warning}
+Perhatian bahawa kadang-kala eShop akan tidak berfungsi untuk peranti yang ia boleh gunakan. Ini semua bergantung pada server Nintendo, dan saya tiada kuasa untuk mengawalnya. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Penyebab ini masih lagi tidak diketahui.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Apa yang ada perlukan
diff --git a/_pages/ms_MY/site-navigation.txt b/_pages/ms_MY/site-navigation.txt
index 3ce2dc1e32..a7e9f4a807 100644
--- a/_pages/ms_MY/site-navigation.txt
+++ b/_pages/ms_MY/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [Soalan Lazim](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Mulakan (New 3DS)](get-started-(new-3ds))
+ [Mulakan (Old 3DS)](get-started-(old-3ds))
+ [Mulakan](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Pindah EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Menukar Kawasan](region-changing)
diff --git a/_pages/ms_MY/troubleshooting.txt b/_pages/ms_MY/troubleshooting.txt
index a104c331ea..fdae04b070 100644
--- a/_pages/ms_MY/troubleshooting.txt
+++ b/_pages/ms_MY/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Sebaik sahaja penyelesaian berjaya untuk anda, anda boleh meneruskan dengan panduan utama
(Seksyen ini agak panjang, sila guna Ctrl+F untuk mencari isu anda.)
-{: .notice--primary}
-**Jika anda masih tidak boleh penyelesaikan isu anda dan perlukan bantuan, sila letakkan semua kandungan yang berkaitan .log fail dari root kad SD anda ke [Gist](https://gist.github.com/), kemudian datang untuk bantuan dengan disediakan penerangan mengenai masalah anda dan apa anda sudah cuba.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## Fungsi DSi / DS rosak selepas habis mengikuti panduan ini
diff --git a/_pages/ms_MY/uninstall-cfw.txt b/_pages/ms_MY/uninstall-cfw.txt
index f4722f052a..47a481ce82 100644
--- a/_pages/ms_MY/uninstall-cfw.txt
+++ b/_pages/ms_MY/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### Apa yang ada perlukan
diff --git a/_pages/ms_MY/updating-b9s.txt b/_pages/ms_MY/updating-b9s.txt
index 491391a15f..5c42ebe710 100644
--- a/_pages/ms_MY/updating-b9s.txt
+++ b/_pages/ms_MY/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/nl_NL/9.2.0-ctrtransfer.txt b/_pages/nl_NL/9.2.0-ctrtransfer.txt
index ae6eb6000a..46fc0c48be 100644
--- a/_pages/nl_NL/9.2.0-ctrtransfer.txt
+++ b/_pages/nl_NL/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
Om een [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) link te gebruiken in deze handleiding, moet je een torrent client hebben zoals [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/nl_NL/a9lh-to-b9s.txt b/_pages/nl_NL/a9lh-to-b9s.txt
index 97391f26ae..f9ded6b44b 100644
--- a/_pages/nl_NL/a9lh-to-b9s.txt
+++ b/_pages/nl_NL/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+Om een [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) link te gebruiken in deze handleiding, moet je een torrent client hebben zoals [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-Om een [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) link te gebruiken in deze handleiding, moet je een torrent client hebben zoals [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/nl_NL/cart-update.txt b/_pages/nl_NL/cart-update.txt
index fa66d8ca96..4b974a66f6 100644
--- a/_pages/nl_NL/cart-update.txt
+++ b/_pages/nl_NL/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
Alle spel cartridges bevatten een kopie van de benodigde systeemversie om dat spel te spelen, hiermee kan iedereen die op een lagere firmwareversie dan het spel zit, een cartridge gebruiken om te updaten naar die firmwareversie (zelfs zonder internet connectie).
-{: .notice--info}
{% capture notice-1 %}
Cartridge Updates zullen alleen systeem functies updaten zoals: Systeem Instellingen, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! Je zal een [alternatieve methode](homebrew-launcher-(alternatives)) nodig hebben om de Homebrew Launcher te openen!
+
+Dit betekent ook dat een cartridge update NIET een browser kan installeren als je er nog geen hebt. Dit zal **alleen** de werkelijke systeemversie updaten * (bijvoorbeeld, 2.1.0-0-> 6.0.0-0)*. Het laatste nummer *(de -0)* zal **niet** veranderen.
{% endcapture %}
{{ notice-1 | markdownify }}
-Dit betekent ook dat een cartridge update NIET een browser kan installeren als je er nog geen hebt. Dit zal **alleen** de werkelijke systeemversie updaten * (bijvoorbeeld, 2.1.0-0-> 6.0.0-0)*. Het laatste nummer *(de -0)* zal **niet** veranderen.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/nl_NL/credits.txt b/_pages/nl_NL/credits.txt
index 0036a910da..47c7a935c5 100644
--- a/_pages/nl_NL/credits.txt
+++ b/_pages/nl_NL/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
Als ik je hier ben vergeten te noemen, neem contact met me op, dan voeg ik je toe.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/nl_NL/f3-(linux).txt b/_pages/nl_NL/f3-(linux).txt
index ef3bedabd9..da60fea5e6 100644
--- a/_pages/nl_NL/f3-(linux).txt
+++ b/_pages/nl_NL/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Afhankelijk van de grootte van je SD kaart en de snelheid van je computer, kan dit proces tot wel enkele uren duren!
-{: .notice--info}
Deze pagina is alleen voor Linux gebruikers. Als je geen Linux gebruikt, zie dan de [H2testw (windows)](h2testw-(windows)) of [F3X (mac)](f3x-(mac)) pagina.
-{: .notice--info}
#### Benodigdheden
diff --git a/_pages/nl_NL/f3x-(mac).txt b/_pages/nl_NL/f3x-(mac).txt
index 12e0c5f73e..b26d7776a1 100644
--- a/_pages/nl_NL/f3x-(mac).txt
+++ b/_pages/nl_NL/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Afhankelijk van de grootte van je SD kaart en de snelheid van je computer, kan dit proces tot wel enkele uren duren!
-{: .notice--info}
Deze pagina is alleen voor Mac-gebruikers. Als je geen Mac gebruikt, zie dan de [H2testw (windows)](h2testw-(windows)) of [F3 (Linux)](f3-(linux)) pagina.
-{: .notice--info}
#### Benodigdheden
diff --git a/_pages/nl_NL/faq.txt b/_pages/nl_NL/faq.txt
index 067c5803c6..a5c6c7333f 100644
--- a/_pages/nl_NL/faq.txt
+++ b/_pages/nl_NL/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *Kan ik mijn 3DS hacken als het de meest recente firmwareversie heeft?*
**A:** Yes
-
+
**Q:** *Hoe update ik Luma3DS?*
**A:** Gebruik Luma3DS Updater
-
+
**Q:** *Ik hoorde iets over dit ding waarvoor ik moet betalen (Gateway, Sky3DS, etc), heb ik zoiets nodig?*
**A:** Nee. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *Hoe verplaats ik save files van een Gateway setup naar spellen die direct op mijn 3DS geïnstalleerd zijn?*
**A:** Volg [deze link](https://gbatemp.net/threads/425743/)
-
+
**Q:** *Wat heb ik nodig om deze handleiding te volgen?*
**A:** Deze handleiding kan volledig gevolgd worden met gratis software
-
+
**Q:** *Hoe riskant is het hacken van mijn console?*
**A:** Bricks zijn nu *zo goed als* onmogelijk, tenzij je alle veiligheidswaarschuwingen negeert of omzeilt.
-
+
**Q:** *Kan ik hier ontzettend coole homebrew en emulators mee gebruiken?*
**A:** Ja! Custom Firmware geeft je niet alleen toegang tot de Homebrew Launcher, maar het zal je ook hacks geven op alle systeemversies, dit betekent dat je het altijd blijft houden, zelfs nadat je update.
-
+
**Q:** *Kan ik dit gebruiken om spellen te spelen uit andere regio's?*
**A:** Luma3DS ondersteunt regiovrije patches, wat de gebruikers toelaat, zonder bijkomende aanpassingen, spellen uit alle regio's te installeren.
-
+
**Q:** *Is het veilig om CFW SysNAND te updaten?*
**A:** Ja. Dit is veilig, stop alsjeblieft met dit te vragen.
-
+
**Q:** *Waar kan ik terecht voor verdere ondersteuning?*
**A:** Voor support, vraag om hulp op [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Kan ik dit doen met een SD kaart van 4GB (of minder)?*
**A:** Ja!
-
+
**Q:** *Kan ik een SD kaart van 128 GB (of meer) gebruiken?*
**A:** Ja, maar sommige gebruikers melden dat het trager werkt met zo'n grote opslagcapaciteiten. Let erop dat je de kaart moet formatteren met FAT32, exFAT werkt niet.
-
+
**Q:** *Hoe kan ik achteraf van SD kaart wisselen?*
**A:** Kopieer simpelweg alle bestanden naar je nieuwe SD kaart.
-
+
**Q:** *Kan ik mijn NNID behouden?*
**A:** Als je alle stappen volgt zal je de NNID behouden waar je de handleiding mee begonnen bent.
-
+
**Q:** *Hoe zit het met System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Kan ik dit doen zonder een computer (bijvoorbeeld met een Android telefoon)?*
**A:** Alles wat je nodig hebt is de mogelijkheid om bestanden op een SD kaart te krijgen!
-
+
**Q:** *Help! Er is iets verkeerd gegaan waardoor mijn 3DS niet meer opstart...*
**A:** Bekijk alsjeblieft de [handleiding voor probleemoplossingen](troubleshooting).
diff --git a/_pages/nl_NL/file-extensions-(windows).txt b/_pages/nl_NL/file-extensions-(windows).txt
index bed6c9bd98..213e7d55d5 100644
--- a/_pages/nl_NL/file-extensions-(windows).txt
+++ b/_pages/nl_NL/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
### Instructies
diff --git a/_pages/nl_NL/finalizing-setup.txt b/_pages/nl_NL/finalizing-setup.txt
index f3ef254c48..f268a984e3 100644
--- a/_pages/nl_NL/finalizing-setup.txt
+++ b/_pages/nl_NL/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
### Overzicht van stappen
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In dit geval gebruiken we Luma3DS, gemaakt door [AuroraWright](https://github.com/AuroraWright/), om een gepatchde SysNAND op te starten, wat ervoor zorgt dat we geen EmuNAND nodig hebben, hierdoor is het makkelijker om een gehackte 3DS te gebruiken en bespaar je ruimte op je SD kaart.
-
+
Tijdens dit proces zullen we ook de volgende programma's installeren:
+ **FBI** *(Installeert spellen en applicaties in CIA formaat)*
@@ -18,10 +17,6 @@ Tijdens dit proces zullen we ook de volgende programma's installeren:
+ **GodMode9** *(multifunctionele tool met NAND en cartridge functies)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Benodigdheden
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-Je kan nu Luma3DS Updater gebruiken om Luma3DS te updaten naar de laatste versie door Luma3DS Updater te openen en op (A) te drukken.
+Je kan nu Luma3DS Updater gebruiken om Luma3DS te updaten naar de laatste versie door Luma3DS Updater te openen en op (A) te drukken.
+
Dit is niet hetzeldfe als een Systeemupdate; het downloadt alleen de laatste versie van de Luma3DS bestanden.
+
Dit zal alleen de Luma3DS bestanden op je SD kaart updaten. Als je jouw 3DS opstart zonder SD kaart zal het de versie gebruiken die je in de CTRNAND geplaatst hebt.
{% endcapture %}
@@ -143,9 +140,13 @@ Dit zal alleen de Luma3DS bestanden op je SD kaart updaten. Als je jouw 3DS opst
{% capture notice-6 %}
Je zal nu standaard Luma3DS CFW SysNAND opstarten.
+
Je kan nu (Select) ingedrukt houden bij het opstarten om in het Luma3DS instellingenmenu te komen.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ Om [NTR CFW](https://github.com/44670/BootNTR/) te gebruiken, moet je [BootNTR S
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/nl_NL/flashing-ntrboot-(custom-firmware).txt b/_pages/nl_NL/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..c416e1e9a7
--- /dev/null
+++ b/_pages/nl_NL/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Benodigdheden
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+### Instructies
+
+##### Deel I - Voorbereiding
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wacht totdat het proces voltooid is
+1. Druk op (B) om terug te gaan naar het hoofdmenu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wacht totdat het proces voltooid is
+1. Druk op (B) om terug te gaan naar het hoofdmenu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/nl_NL/flashing-ntrboot-(powersaves).txt b/_pages/nl_NL/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/nl_NL/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/nl_NL/get-started-(new-3ds).txt b/_pages/nl_NL/get-started-(new-3ds).txt
index 1344098182..7350c37a6c 100644
--- a/_pages/nl_NL/get-started-(new-3ds).txt
+++ b/_pages/nl_NL/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Kies de juiste pagina die bij jouw versie hoort uit onderstaande tabel.
-{: .notice--primary}
+Kies de juiste pagina die bij jouw versie hoort uit onderstaande tabel. Note that the "from" and "to" fields are inclusive. Dat betekent dat, bijvoorbeeld, de "van 9.0.0 tot 9.2.0" rij ook 9.0.0, 9.1.0 en 9.2.0 omvat.
-Note that the "from" and "to" fields are inclusive. Dat betekent dat, bijvoorbeeld, de "van 9.0.0 tot 9.2.0" rij ook 9.0.0, 9.1.0 en 9.2.0 omvat.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
De systeemversie van je 3DS kan je rechtsonder op het bovenste scherm in de systeeminstellingen vinden.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ De systeemversie van je 3DS kan je rechtsonder op het bovenste scherm in de syst
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/nl_NL/get-started-(old-3ds).txt b/_pages/nl_NL/get-started-(old-3ds).txt
index 6064bb6cac..432094a0a6 100644
--- a/_pages/nl_NL/get-started-(old-3ds).txt
+++ b/_pages/nl_NL/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Kies de juiste pagina die bij jouw versie hoort uit onderstaande tabel.
-{: .notice--primary}
+Kies de juiste pagina die bij jouw versie hoort uit onderstaande tabel. Note that the "from" and "to" fields are inclusive. Dit betekent dat, bijvoorbeeld, de "van 9.0.0 to 9.2.0" rij 9.0.0, 9.1.0, en 9.2.0 inhoudt.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Als de versie -0 is heb je geen browser. Elk nummer dat hoger is dan -0 geeft aan dat er een browser geïnstalleerd is.
-{% capture notice-1 %}
-De laatste twee kolommen van de tabel verwijzen naar het laatste nummer van je firmwareversie (dit nummer geeft aan welke browserversie op je systeem geïnstalleerd is). Als de versie -0 is heb je geen browser. Elk nummer dat hoger is dan -0 geeft aan dat er een browser geïnstalleerd is.
-
-De "van" en "tot" velden zijn inclusief. Dit betekent dat, bijvoorbeeld, de "van 9.0.0 to 9.2.0" rij 9.0.0, 9.1.0, en 9.2.0 inhoudt.
-
In het geval van bijvoorbeeld "5.0.0-0U", moet je de "Geen Browser" kolom en de "5.0.0 tot 5.1.0" rij gebruiken. Je systeem heeft in dit geval namelijk geen browser en een versie die daar tussen valt.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Cartridge Updates zullen alleen systeem functies updaten zoals: Systeem Instellingen, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! Je zal een [alternatieve methode](homebrew-launcher-(alternatives)) nodig hebben om de Homebrew Launcher te openen!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Als je geupdatet hebt via een game cart met versie 9.9.0 of hoger *(wat wil zeggen dat je versie 9.9.0 of hoger hebt, maar je browser -25 of lager is, zoals 10.2.0-24)*, is je browser verwijderd en moet je de kolom "Geen Browser" kiezen.
-{: .notice--warning}
De systeemversie van je 3DS kan je rechtsonder op het bovenste scherm in de systeeminstellingen vinden.
-{: .notice--success}
{: .notice--info}
+Als je geupdatet hebt via een game cart met versie 9.9.0 of hoger *(wat wil zeggen dat je versie 9.9.0 of hoger hebt, maar je browser -25 of lager is, zoals 10.2.0-24)*, is je browser verwijderd en moet je de kolom "Geen Browser" kiezen.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/nl_NL/get-started.txt b/_pages/nl_NL/get-started.txt
index 3b7e849c9e..77cc06b89f 100644
--- a/_pages/nl_NL/get-started.txt
+++ b/_pages/nl_NL/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Op deze pagina zal je vinden waar je moet starten voor jouw apparaat.
-De kleuren van de apparaten in de afbeeldingen kunnen verschillen, maar kijk goed naar waar de knoppen zitten en naar de kenmerken van elk apparaat om er zeker van te zijn dat je de juiste hebt gekozen.
-{: .notice}
-
-Klik op de foto van jouw apparaat om naar de juiste pagina te gaan.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. Op deze pagina zal je vinden waar je moet starten voor jouw apparaat.
-{: .notice--info}
+Klik op de foto van jouw apparaat om naar de juiste pagina te gaan. De kleuren van de apparaten in de afbeeldingen kunnen verschillen, maar kijk goed naar waar de knoppen zitten en naar de kenmerken van elk apparaat om er zeker van te zijn dat je de juiste hebt gekozen.
Als je je 3DS al een keer hebt gehackt en je een op een EmuNAND gebaseerde CFW setup hebt, volg dan gewoon alle instructies terwijl je nog op SysNAND bent. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Voordat je begint is het handig om je SD kaart te controleren op fouten met behulp van [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), of [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/nl_NL/godmode9-usage.txt b/_pages/nl_NL/godmode9-usage.txt
index 31f844fb1f..1b473e376a 100644
--- a/_pages/nl_NL/godmode9-usage.txt
+++ b/_pages/nl_NL/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
Godmode9 is een bestandsbeheer die volledige toegang heeft tot de Nintendo 3DS console, het geeft je toegang tot je SD kaart, de FAT partities van je SysNAND en EmuNAND en zo goed als alles anders. Naast andere functies kan je ook bestanden kopiëren, verwijderen en hernoemen en mappen aanmaken.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. Maar, voorzorgen zijn genomen zodat je niet per ongeluk data op je console zal beschadigen.
-
+
Het heeft een systeem in plaats dat je zal beschermen door middel van waarschuwingen en het zal je vragen om een serie van knoppen in te drukken om de permissies om te schrijven in te schakelen. Het is niet mogelijk om belangrijke dingen te overschrijven of te wijzigen zonder de serie van knoppen en het niet mogelijk om per ongeluk de vergrendeling te ontdoen. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/nl_NL/h2testw-(windows).txt b/_pages/nl_NL/h2testw-(windows).txt
index 3d8268b03e..d5765fcea4 100644
--- a/_pages/nl_NL/h2testw-(windows).txt
+++ b/_pages/nl_NL/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Afhankelijk van de grootte van je SD kaart en de snelheid van je computer, kan dit proces enkele uren duren!
-{: .notice--info}
Deze pagina is alleen voor windows-gebruikers. Als je geen Windows gebruikt, bekijk dan de [F3 (linux)](f3-(linux)) of de [F3X (mac)](f3x-(mac)) pagina.
-{: .notice--info}
#### Benodigdheden
diff --git a/_pages/nl_NL/home.txt b/_pages/nl_NL/home.txt
index 172b2fb976..4a10b5fb82 100644
--- a/_pages/nl_NL/home.txt
+++ b/_pages/nl_NL/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") stelt je in staat om meer geavanceerde hacks te gebruiken die userland homebrew niet gemakkelijk kunnen doen. Bijvoorbeeld, signature patches laten je ongesigneerde titels installeren die recht op je HOME Menu verschijnen.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Wat installeert deze handleiding?
diff --git a/_pages/nl_NL/homebrew-launcher-(alternatives).txt b/_pages/nl_NL/homebrew-launcher-(alternatives).txt
index f6d0b946f8..8497d1ec42 100644
--- a/_pages/nl_NL/homebrew-launcher-(alternatives).txt
+++ b/_pages/nl_NL/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
De Homebrew Launcher heeft veel verschillende entrypoints (ingangspunten) of lanceringsmethoden.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Draadloze Communicatie hoeft alleen maar aan te staan; Het hoeft niet aan een netwerk verbonden te zijn.
-{: .notice--info}
#### Benodigdheden
diff --git a/_pages/nl_NL/homebrew-launcher-(soundhax).txt b/_pages/nl_NL/homebrew-launcher-(soundhax).txt
index e35535812d..4c651e31af 100644
--- a/_pages/nl_NL/homebrew-launcher-(soundhax).txt
+++ b/_pages/nl_NL/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
De Homebrew Launcher heeft veel verschillende entrypoints (ingangspunten) of lanceringsmethoden.
-{: .notice--info}
Soundhax is compatibel met firmwareversies 9.0.0 tot en met 11.3.0 in regio's EUR, JPN, KOR en USA.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Draadloze Communicatie hoeft alleen maar aan te staan; Het hoeft niet aan een netwerk verbonden te zijn.
-{: .notice--info}
{% capture notice-1 %}
Cartridge Updates zullen alleen systeem functies updaten zoals: Systeem Instellingen, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! Je zal een [alternatieve methode](homebrew-launcher-(alternatives)) nodig hebben om de Homebrew Launcher te openen!
{% endcapture %}
diff --git a/_pages/nl_NL/installing-boot9strap-(browser).txt b/_pages/nl_NL/installing-boot9strap-(browser).txt
index 79fc06ea9b..257021f747 100644
--- a/_pages/nl_NL/installing-boot9strap-(browser).txt
+++ b/_pages/nl_NL/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
Als je je 3DS al eens eerder gehacked hebt met een op EmuNAND-gebaseerde CFW setup, deze handleiding zal zich alleen maar met sysNAND zich bezig houden, dus moet je alle instructies volgen vanuit of toepassend op SysNAND. Merk op dat de termen EmuNAND en RedNAND naar iets andere implementaties van [hetzelfde concept verwijzen](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Benodigdheden
diff --git a/_pages/nl_NL/installing-boot9strap-(dsiware).txt b/_pages/nl_NL/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/nl_NL/installing-boot9strap-(dsiware).txt
+++ b/_pages/nl_NL/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/nl_NL/installing-boot9strap-(dsiware-game-injection).txt b/_pages/nl_NL/installing-boot9strap-(dsiware-game-injection).txt
index 8d59b52d3c..8422cce52e 100644
--- a/_pages/nl_NL/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/nl_NL/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Om een [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) link te gebruiken in deze handleiding, moet je een torrent client hebben zoals [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Benodigdheden
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/nl_NL/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/nl_NL/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/nl_NL/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/nl_NL/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/nl_NL/installing-boot9strap-(dsiware-save-injection).txt b/_pages/nl_NL/installing-boot9strap-(dsiware-save-injection).txt
index 49d336944e..6ebdf78bf0 100644
--- a/_pages/nl_NL/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/nl_NL/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Om een [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) link te gebruiken in deze handleiding, moet je een torrent client hebben zoals [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Benodigdheden
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/nl_NL/installing-boot9strap-(hardmod).txt b/_pages/nl_NL/installing-boot9strap-(hardmod).txt
index 94d6d8ea0d..75648fad4c 100644
--- a/_pages/nl_NL/installing-boot9strap-(hardmod).txt
+++ b/_pages/nl_NL/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
Om een [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) link te gebruiken in deze handleiding, moet je een torrent client hebben zoals [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### Benodigdheden
diff --git a/_pages/nl_NL/installing-boot9strap-(homebrew-launcher).txt b/_pages/nl_NL/installing-boot9strap-(homebrew-launcher).txt
index 522f4d59d1..5231b45aa0 100644
--- a/_pages/nl_NL/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/nl_NL/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
Als je je 3DS al eens eerder gehacked hebt met een op EmuNAND-gebaseerde CFW setup, deze handleiding zal zich alleen maar met sysNAND zich bezig houden, dus moet je alle instructies volgen vanuit of toepassend op SysNAND. Merk op dat de termen EmuNAND en RedNAND naar iets andere implementaties van [hetzelfde concept verwijzen](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
### Instructies
@@ -20,6 +19,8 @@ Als je je 3DS al eens eerder gehacked hebt met een op EmuNAND-gebaseerde CFW set
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Als het vastloopt, zet het apparaat dan gewoon uit door de power knop ingedrukt te houden, probeer het daarna opnieuw
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/nl_NL/installing-boot9strap-(mset).txt b/_pages/nl_NL/installing-boot9strap-(mset).txt
index 13d9ab4f28..2710946481 100644
--- a/_pages/nl_NL/installing-boot9strap-(mset).txt
+++ b/_pages/nl_NL/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
Als je je 3DS al eens eerder gehacked hebt met een op EmuNAND-gebaseerde CFW setup, deze handleiding zal zich alleen maar met sysNAND zich bezig houden, dus moet je alle instructies volgen vanuit of toepassend op SysNAND. Merk op dat de termen EmuNAND en RedNAND naar iets andere implementaties van [hetzelfde concept verwijzen](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Benodigdheden
diff --git a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..6616185670
--- /dev/null
+++ b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Benodigdheden
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* De meest recente versie van [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(het `.7z` bestand)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+### Instructies
+
+##### Deel I - Voorbereiding
+
+1. Schakel je 3ds uit
+1. Plaats je SD kaart in je computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Stop je SD kaart terug in je 3DS
+1. Zet je 3DS aan
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Schakel je 3ds uit
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Plaats je SD kaart in je computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Stop je SD kaart terug in je 3DS
+1. Zet je 3DS aan
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Druk op (Start) om op te slaan en opnieuw op te starten
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wacht totdat het proces voltooid is
+1. Druk op (B) om terug te gaan naar het hoofdmenu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/nl_NL/move-emunand.txt b/_pages/nl_NL/move-emunand.txt
index 217d8ba7e9..6f7893476c 100644
--- a/_pages/nl_NL/move-emunand.txt
+++ b/_pages/nl_NL/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
Dit is de add-on-sectie voor het verplaatsen van een oude EmuNAND naar je nieuwe SysNAND CFW, en daarna het verwijderen van het oude EmuNAND gedeelte. Merk op dat de termen EmuNAND en RedNAND naar iets andere implementaties van [hetzelfde concept verwijzen](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/nl_NL/ntr-and-cubic-ninja.txt b/_pages/nl_NL/ntr-and-cubic-ninja.txt
index 1dc5a837c0..69720fc0c9 100644
--- a/_pages/nl_NL/ntr-and-cubic-ninja.txt
+++ b/_pages/nl_NL/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
Om een [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) link te gebruiken in deze handleiding, moet je een torrent client hebben zoals [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja werkt alleen op een JPN New 3DS**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Benodigdheden
diff --git a/_pages/nl_NL/ntrboot.txt b/_pages/nl_NL/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/nl_NL/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/nl_NL/region-changing.txt b/_pages/nl_NL/region-changing.txt
index a219814e40..3f3323d83e 100644
--- a/_pages/nl_NL/region-changing.txt
+++ b/_pages/nl_NL/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. Dit wordt gedaan door de 9.2.0 CTRTransfer image voor de regio die jij wil hebben te installeren.
-{: .notice--primary}
-**Het veranderen van jouw regio is bijna volledig onnodig omdat Luma3DS spellen uit andere regio's kan afspelen, en ook individuele [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
Om een [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) link te gebruiken in deze handleiding, moet je een torrent client hebben zoals [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Dit proces zal jouw NNID loskoppelen van het systeem, omdat het niet langer passend is met het systeem. NNID's zijn aan de regio van je systeem die de NNID's gemaakt heeft verbonden, en kunnen daarom niet met de regio's mee veranderen zonder [een erg complex en gevorderd proces](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Dit proces zal jouw NNID loskoppelen van het systeem, omdat het niet langer pass
Na dit proces kunnen alleen **New 3DS'en die nog nóóit eerder de eShop bezocht hebben** en **alle Old 3DS'en** nog de eShop bezoeken na het maken van een nieuw NNID op hun nieuwe regio. De New 3DS'en die al eerder op de eShop op hun originele regio zijn geweest, kunnen geen nieuwe NNID maken en kunnen niet de eShop bezoeken wanneer de regio veranderd is!
{: .notice--warning}
-Let wel op dat af en toe de eShop, zonder goede reden, nog steeds niet werkt voor de systemen waarop het wel zou moeten werken. Dit ligt helemaal bij de servers van Nintendo en ik heb hier totaal geen controle over.
-{: .notice--warning}
-
-Vergelijkbaar tot de bovenstaande waarschuwing, wees er bewust van dat in sommige gevallen de eShop voor geen duidelijke reden zal werken op systemen waarop het niet zou moeten (zoals sommige New 3DSen). De oorzaak hiervoor is momenteel onbekend.
-{: .notice--warning}
+Let wel op dat af en toe de eShop, zonder goede reden, nog steeds niet werkt voor de systemen waarop het wel zou moeten werken. Dit ligt helemaal bij de servers van Nintendo en ik heb hier totaal geen controle over. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). De oorzaak hiervoor is momenteel onbekend.
Het veranderen van je regio met behulp van CTRTransfer (dit is de methode die hier gebruikt wordt) blijkt "reboot patches" kapot te maken. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Benodigdheden
diff --git a/_pages/nl_NL/site-navigation.txt b/_pages/nl_NL/site-navigation.txt
index 38a4e1257f..bdecd351ad 100644
--- a/_pages/nl_NL/site-navigation.txt
+++ b/_pages/nl_NL/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [Veel gestelde vragen](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Begin (nieuwe 3DS)](get-started-(new-3ds))
+ [begin (oude 3DS)](get-started-(old-3ds))
+ [Begin](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [EmuNAND Verplaatsen](move-emunand)
+ [NTR en Cubic Ninja](ntr-and-cubic-ninja)
+ [Regio Wijzigen](region-changing)
diff --git a/_pages/nl_NL/troubleshooting.txt b/_pages/nl_NL/troubleshooting.txt
index 39cfdc62cd..d914fb751e 100644
--- a/_pages/nl_NL/troubleshooting.txt
+++ b/_pages/nl_NL/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
Als je jouw 3DS niet meer aan krijgt, kijk dan naar de relevante sectie voor jou, en volg de instructies. Wanneer een oplossing voor jou werkt, kan je verder gaan met de rest van de handleiding
(Aangezien deze pagina redelijk lang is, wordt aangeraden om Ctrl+F te gebruiken om te zoeken naar jouw probleem.)
-{: .notice--primary}
-**Als je nog steeds jouw probleem niet kan oplossen en verdere hulp nodig heeft, kopieer dan alle relevante .log bestanden van de root van jouw SD kaart in een [Gist](http://gist.github.com/), kom dan voor hulp samen met een gedetailleerde omschrijving van jouw probleem en wat je al geprobeerd hebt.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
Om een [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) link te gebruiken in deze handleiding, moet je een torrent client hebben zoals [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functies werken niet meer na het voltooien van de handleiding
diff --git a/_pages/nl_NL/uninstall-cfw.txt b/_pages/nl_NL/uninstall-cfw.txt
index e01ba2d0ba..a065fa717b 100644
--- a/_pages/nl_NL/uninstall-cfw.txt
+++ b/_pages/nl_NL/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### Benodigdheden
diff --git a/_pages/nl_NL/updating-b9s.txt b/_pages/nl_NL/updating-b9s.txt
index 88a62d72d1..1692fff295 100644
--- a/_pages/nl_NL/updating-b9s.txt
+++ b/_pages/nl_NL/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/no_NO/9.2.0-ctrtransfer.txt b/_pages/no_NO/9.2.0-ctrtransfer.txt
index af642bbee7..07bcc1aadc 100644
--- a/_pages/no_NO/9.2.0-ctrtransfer.txt
+++ b/_pages/no_NO/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
Dette er add-on delen for å installasjon av 9.2.0 CTRTransfer bilde til enheten.
-{: .notice--primary}
**For å benytte [magnetlenker](https://en.wikipedia.org/wiki/Magnet_URI_scheme) du finner i veiledningen trenger du en torrentklient som f.eks. [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/no_NO/a9lh-to-b9s.txt b/_pages/no_NO/a9lh-to-b9s.txt
index 55a5950d88..5e02c1f511 100644
--- a/_pages/no_NO/a9lh-to-b9s.txt
+++ b/_pages/no_NO/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+**For å benytte [magnetlenker](https://en.wikipedia.org/wiki/Magnet_URI_scheme) du finner i veiledningen trenger du en torrentklient som f.eks. [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-**For å benytte [magnetlenker](https://en.wikipedia.org/wiki/Magnet_URI_scheme) du finner i veiledningen trenger du en torrentklient som f.eks. [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/no_NO/cart-update.txt b/_pages/no_NO/cart-update.txt
index be93ed3484..eb9d09b183 100644
--- a/_pages/no_NO/cart-update.txt
+++ b/_pages/no_NO/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
Alle spillkassetter inneholder en kopi av den systemversjonen de krever for å spille det noe som muliggjør noen med en lavere versjon til å bruke kassetten til å oppdatere til den versjonen (også uten tilknytning til internett).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. Dette kommer **bare** til å oppdatere systemversjonen *(f.eks. 2.1.0-0 -> 6.0.0-0)*. Det siste nummeret *(0-en)* kommer **ikke** til å endres.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. Dette kommer **bare** til å oppdatere systemversjonen *(f.eks. 2.1.0-0 -> 6.0.0-0)*. Det siste nummeret *(0-en)* kommer **ikke** til å endres.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/no_NO/credits.txt b/_pages/no_NO/credits.txt
index 57fd19fd5a..bb53894be8 100644
--- a/_pages/no_NO/credits.txt
+++ b/_pages/no_NO/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
Hvis jeg glemte deg, ta kontakt så legger jeg deg til.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/no_NO/f3-(linux).txt b/_pages/no_NO/f3-(linux).txt
index 6397234877..87494d4343 100644
--- a/_pages/no_NO/f3-(linux).txt
+++ b/_pages/no_NO/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Avhengig av størrelsen på SD-kortet og hastigheten på datamaskinen din, kan denne prosessen ta opptil flere timer!
-{: .notice--info}
Denne siden er kun for Linux-brukere. Hvis du ikke bruker Linux, sjekk ut siden, [H2testw (windows)](h2testw-(windows)) eller [F3X (mac)](f3x-(mac))
-{: .notice--info}
#### Det du trenger
diff --git a/_pages/no_NO/f3x-(mac).txt b/_pages/no_NO/f3x-(mac).txt
index 206796db34..71dd7cd91c 100644
--- a/_pages/no_NO/f3x-(mac).txt
+++ b/_pages/no_NO/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Avhengig av størrelsen på SD-kortet og hastigheten på datamaskinen din, kan denne prosessen ta opptil flere timer!
-{: .notice--info}
Denne siden er kun for Mac-brukere. Hvis du ikke bruker Mac, sjekk ut [H2testw (windows)](h2testw-(windows)) eller [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### Det du trenger
diff --git a/_pages/no_NO/faq.txt b/_pages/no_NO/faq.txt
index efcab5514e..31dff31bf8 100644
--- a/_pages/no_NO/faq.txt
+++ b/_pages/no_NO/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *Jeg er på den siste versjonen, kan jeg hacke den?*
**A:** Ja
-
+
**Q:** *Hvordan oppdaterer jeg Luma3DS?*
**A:** Bruk Luma3DS Updater
-
+
**Q:** *Jeg har hørt om denne tingen jeg må betale for (Gateway, Sky3DS, etc), er det noe jeg trenger?*
**A:** Nei. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *Hvordan flytter jeg saver fra en eksisterende Gateway installasjon til spill installert på enheten?*
**A:** Se [dnne tråden på gbatemp](https://gbatemp.net/threads/425743/)
-
+
**Q:** *Hva trenger jeg for å følge veiledningen?*
** A: ** kan denne veiledningen kan fullførest helt, med gratis programvare
-
+
**Q:** *Hvor risikabelt er det å hacke konsollen min?*
**A:** Bricking er nå *grunnsettlig* umulig, med mindre du ignorerer/unngår alle sikkerhetskontroller.
-
+
**Q:** *Kan jeg kjøre interesante homebrew og emulatorer med dette?*
**A:** Ja! Custom Firmware muligjør ikke bare Homebrew launcheren, men den vil også gi deg hacks på alle versjoner, noe som betyr at du beholder den for alltid, til og med ved oppdateringer.
-
+
**Q:** *Kan jeg bruke dette til å spille spill fra andre regioner?*
**A:** Luma3DS støtter regionfrie patcher, som muliggjør brukere å installere spill fra en vilkårlig region uten noen ekstra endring eller andre trinn.
-
+
**Q:** *Er det trygt å oppdatere CFW SysNAND?*
**A:** Ja. Dette er trygt, slutt å spørre om det.
-
+
**Q:** *Hvor går jeg for hjelp?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Kan jeg gjøre dette med et 4GB (eller mindre) SD-kort?*
**A:** Ja!
-
+
**Q:** *Kan jeg bruke et 128 GB (eller større) SD kort?*
**A:** Ja, men noen brukere har rapportert om at systemet kan bli tregere ved bruk av så store størrelser. Legg merke til at du ikke kan formatere kortet med exFAT; du må bruke FAT32.
-
+
**Q:** *Hvordan flytter jeg over til et nytt SD-kort etter dette?*
**A:** Det er bare å kopiere alle filene over til det nye SD-kortet.
-
+
**Q:** *Kan jeg beholde NNIDen min?*
**A:** Hvis du starter med en NNID og følger hvert steg så vil du beholde din NNID til slutt.
-
+
**Q:** *Hva med systemoverføringer?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Kan jeg gjøre dette uten en datamaskin (f.eks. en Android mobil)?*
** A: ** alt du trenger er muligheten til å plassere filer på et SD-kort!
-
+
**Q:** *Hjelp! Noe gikk galt, nå virker den ikke lengre...*
**A:** Se [feilsøking](troubleshooting).
diff --git a/_pages/no_NO/file-extensions-(windows).txt b/_pages/no_NO/file-extensions-(windows).txt
index 98e7f72bae..2ef43f9b87 100644
--- a/_pages/no_NO/file-extensions-(windows).txt
+++ b/_pages/no_NO/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instruksjoner
diff --git a/_pages/no_NO/finalizing-setup.txt b/_pages/no_NO/finalizing-setup.txt
index dfcd8b6a6d..24fbb82ffc 100644
--- a/_pages/no_NO/finalizing-setup.txt
+++ b/_pages/no_NO/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
### Oversikt over trinn
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
I dette tilfellet bruker vi Luma3DS fra [AuroraWright](https://github.com/AuroraWright/) for å starte et patchet SysNAND direkte, slik at vi kan omgå behovet for alle slags EmuNAND fullstendig, og dermed forenkle bruken av en hacket 3DS utover det å spare plass på SD-kort.
-
+
Under denne prossesen, vil vi også sette opp program som følgende:
+ **FBI** *(installerer CIAformaterte spill og applikasjoner)*
@@ -18,10 +17,6 @@ Under denne prossesen, vil vi også sette opp program som følgende:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Det du trenger
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-Du kan nå bruke "Luma3DS Updater" for å oppdatere din Luma3DS til siste versjon, ved å åpne den og trykke (A).
+Du kan nå bruke "Luma3DS Updater" for å oppdatere din Luma3DS til siste versjon, ved å åpne den og trykke (A).
+
Dette er ikke det samme som en systemoppdatering; den bare laster ned og pakker ut de nyeste Luma3DS-filene.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
Du kan holde (Select) ved oppstart for å laste Luma3DSs konfigurasjonsmeny.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/no_NO/flashing-ntrboot-(custom-firmware).txt b/_pages/no_NO/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..b990e6ba13
--- /dev/null
+++ b/_pages/no_NO/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Det du trenger
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instruksjoner
+
+##### Seksjon I - Forarbeid
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Vent til prosessen har fullført
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Vent til prosessen har fullført
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/no_NO/flashing-ntrboot-(powersaves).txt b/_pages/no_NO/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/no_NO/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/no_NO/get-started-(new-3ds).txt b/_pages/no_NO/get-started-(new-3ds).txt
index cebccb91cf..8f904e4d58 100644
--- a/_pages/no_NO/get-started-(new-3ds).txt
+++ b/_pages/no_NO/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Velg den aktuelle siden for din versjon fra diagrammet nedenfor.
-{: .notice--primary}
+Velg den aktuelle siden for din versjon fra diagrammet nedenfor. Note that the "from" and "to" fields are inclusive. Dette betyr at for eksempel, raden "fra 9.0.0 til 9.2.0" inkluderer 9.0.0, 9.1.0, og 9.2.0.
-Note that the "from" and "to" fields are inclusive. Dette betyr at for eksempel, raden "fra 9.0.0 til 9.2.0" inkluderer 9.0.0, 9.1.0, og 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/no_NO/get-started-(old-3ds).txt b/_pages/no_NO/get-started-(old-3ds).txt
index 19acfbdf67..62a93de8a6 100644
--- a/_pages/no_NO/get-started-(old-3ds).txt
+++ b/_pages/no_NO/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Velg den aktuelle siden for din versjon fra diagrammet nedenfor.
-{: .notice--primary}
+Velg den aktuelle siden for din versjon fra diagrammet nedenfor. Note that the "from" and "to" fields are inclusive. Dette betyr at for eksempel, raden "fra 9.0.0 til 9.2.0" inkluderer 9.0.0, 9.1.0, og 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Hvis versjonen er -0 da har du ikke en nettleser, mens et tall over -0 indikerer at en nettleser er installert.
-{% capture notice-1 %}
-De to siste kolonnene av diagrammet referer til de siste tallene av din versjon (som tilsvarer til nettleserens versjon installert på systemet). Hvis versjonen er -0 da har du ikke en nettleser, mens et tall over -0 indikerer at en nettleser er installert.
-
-"Til" og "fra" feltene er inkludert. Dette betyr at for eksempel, raden "fra 9.0.0 til 9.2.0" inkluderer 9.0.0, 9.1.0, og 9.2.0.
-
I tilfellet av "5.0.0-0U" for eksempel, ville du fulgt "ingen nettleser" kolonnen og 5.0.0 til 5.1.0 raden fordi systemet er på system versjonen i det området og har ingen nettleser installert.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Hvis du oppdaterte med en spillkasset som inneholder versjonen 9.9.0 eller over * (som betyr at du har en versjon på 9.9.0 eller over, men din nettleseren er på -25 eller lavere, som 10.2.0-24)*, nettleseren din ble fjernet og du må bruke "Uten Nettleser" kolonnen.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+Hvis du oppdaterte med en spillkasset som inneholder versjonen 9.9.0 eller over * (som betyr at du har en versjon på 9.9.0 eller over, men din nettleseren er på -25 eller lavere, som 10.2.0-24)*, nettleseren din ble fjernet og du må bruke "Uten Nettleser" kolonnen.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/no_NO/get-started.txt b/_pages/no_NO/get-started.txt
index 45148f1784..0df2d4ddf7 100644
--- a/_pages/no_NO/get-started.txt
+++ b/_pages/no_NO/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Denne siden vil hjelpe deg å finne hvor du skal starte med din konsoll.
-Fargene til enhetene i bildene kan variere, men merk knappeplasseringen og funksjonene av hver enhet nøye for å sikre deg at du velger den rette.
-{: .notice}
-
-Klikk på bildet av konsollen din for å gå videre.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. Denne siden vil hjelpe deg å finne hvor du skal starte med din konsoll.
-{: .notice--info}
+Klikk på bildet av konsollen din for å gå videre. Fargene til enhetene i bildene kan variere, men merk knappeplasseringen og funksjonene av hver enhet nøye for å sikre deg at du velger den rette.
Hvis du allerede har hacket din 3DS før og har et EmuNAND basert CFW oppsett, bare følg alle instruksene meden du er på SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Før du starter kan det være lurt å sjekke om SD-kortet er korrupt, du kan sjekke etter feil med, [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), eller [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/no_NO/godmode9-usage.txt b/_pages/no_NO/godmode9-usage.txt
index 6353169e1f..6ba348995a 100644
--- a/_pages/no_NO/godmode9-usage.txt
+++ b/_pages/no_NO/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/no_NO/h2testw-(windows).txt b/_pages/no_NO/h2testw-(windows).txt
index f838df69f1..28e4fd07b1 100644
--- a/_pages/no_NO/h2testw-(windows).txt
+++ b/_pages/no_NO/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Avhengig av størrelsen på SD-kortetet og hastigheten på datamaskinen din, kan denne prosessen ta opptil flere timer!
-{: .notice--info}
Denne siden er kun for Windows-brukere. Hvis du ikke bruker Windows, sjekk ut siden, [F3 (linux)](f3-(linux)) eller [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Det du trenger
diff --git a/_pages/no_NO/home.txt b/_pages/no_NO/home.txt
index 23ff9f4234..4417f08afd 100644
--- a/_pages/no_NO/home.txt
+++ b/_pages/no_NO/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") gjør det mulig for deg å bruke mer avanserte hacker som brukerland homebrew ikke lett kan gjøre. For eksempel gjør signaturpatcher det mulig å installere usignerte titler som vises på hjemmemenyen din.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Hva installerer denne guiden?
diff --git a/_pages/no_NO/homebrew-launcher-(alternatives).txt b/_pages/no_NO/homebrew-launcher-(alternatives).txt
index ce9ef336c0..f397326ba6 100644
--- a/_pages/no_NO/homebrew-launcher-(alternatives).txt
+++ b/_pages/no_NO/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### Det du trenger
diff --git a/_pages/no_NO/homebrew-launcher-(soundhax).txt b/_pages/no_NO/homebrew-launcher-(soundhax).txt
index 39a9acfb78..8be4c8841e 100644
--- a/_pages/no_NO/homebrew-launcher-(soundhax).txt
+++ b/_pages/no_NO/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Homebrew Launcher har flere forskjellige inngangspunkt eller metoder for å starte.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/no_NO/installing-boot9strap-(browser).txt b/_pages/no_NO/installing-boot9strap-(browser).txt
index 8ddbd35d40..a1c88be4c4 100644
--- a/_pages/no_NO/installing-boot9strap-(browser).txt
+++ b/_pages/no_NO/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Merk at EmuNAND og RedNAND refererer til litt forskjellige implementeringer av [det samme konseptet](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Det du trenger
diff --git a/_pages/no_NO/installing-boot9strap-(dsiware).txt b/_pages/no_NO/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/no_NO/installing-boot9strap-(dsiware).txt
+++ b/_pages/no_NO/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/no_NO/installing-boot9strap-(dsiware-game-injection).txt b/_pages/no_NO/installing-boot9strap-(dsiware-game-injection).txt
index efb324f46b..7ee313db5a 100644
--- a/_pages/no_NO/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/no_NO/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
**For å benytte [magnetlenker](https://en.wikipedia.org/wiki/Magnet_URI_scheme) du finner i veiledningen trenger du en torrentklient som f.eks. [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Det du trenger
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/no_NO/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/no_NO/installing-boot9strap-(dsiware-game-injection-list).txt
index 7d63596d71..51e715e45e 100644
--- a/_pages/no_NO/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/no_NO/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/no_NO/installing-boot9strap-(dsiware-save-injection).txt b/_pages/no_NO/installing-boot9strap-(dsiware-save-injection).txt
index 478f4601c4..c00dd04400 100644
--- a/_pages/no_NO/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/no_NO/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
**For å benytte [magnetlenker](https://en.wikipedia.org/wiki/Magnet_URI_scheme) du finner i veiledningen trenger du en torrentklient som f.eks. [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Det du trenger
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/no_NO/installing-boot9strap-(hardmod).txt b/_pages/no_NO/installing-boot9strap-(hardmod).txt
index 213b0f80ec..48bcd1f07a 100644
--- a/_pages/no_NO/installing-boot9strap-(hardmod).txt
+++ b/_pages/no_NO/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
**For å benytte [magnetlenker](https://en.wikipedia.org/wiki/Magnet_URI_scheme) du finner i veiledningen trenger du en torrentklient som f.eks. [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### Det du trenger
diff --git a/_pages/no_NO/installing-boot9strap-(homebrew-launcher).txt b/_pages/no_NO/installing-boot9strap-(homebrew-launcher).txt
index 78b3b35cde..991d84d9a5 100644
--- a/_pages/no_NO/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/no_NO/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Merk at EmuNAND og RedNAND refererer til litt forskjellige implementeringer av [det samme konseptet](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instruksjoner
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Hvis enheten fryser, kan du tvinge den til å skru seg av ved og holde av-knappen og så prøve igjen
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/no_NO/installing-boot9strap-(mset).txt b/_pages/no_NO/installing-boot9strap-(mset).txt
index 872fbe2fb8..8ab0ba623e 100644
--- a/_pages/no_NO/installing-boot9strap-(mset).txt
+++ b/_pages/no_NO/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Merk at EmuNAND og RedNAND refererer til litt forskjellige implementeringer av [det samme konseptet](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Det du trenger
diff --git a/_pages/no_NO/installing-boot9strap-(ntrboot).txt b/_pages/no_NO/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..3dd5b985b9
--- /dev/null
+++ b/_pages/no_NO/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Det du trenger
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Siste utgave av [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-filen)*
+* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instruksjoner
+
+##### Seksjon I - Forarbeid
+
+1. Slå av enheten
+1. Sett inn SD-kortet i datamaskinen din
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Sett inn SD-kortet i konsollen igjen
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Slå av enheten
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Sett inn SD-kortet i datamaskinen din
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Sett inn SD-kortet i konsollen igjen
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Trykk (Start) for å lagre og starte på nytt
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Vent til prosessen har fullført
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/no_NO/move-emunand.txt b/_pages/no_NO/move-emunand.txt
index ac15e3f7fb..c1ff4636ca 100644
--- a/_pages/no_NO/move-emunand.txt
+++ b/_pages/no_NO/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Merk at EmuNAND og RedNAND refererer til litt forskjellige implementeringer av [det samme konseptet](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**Du MÅ allerede ha installert Luma3DS og boot9strap eller arm9loaderhax for å bruke dette.**
{: .notice--danger}
diff --git a/_pages/no_NO/ntr-and-cubic-ninja.txt b/_pages/no_NO/ntr-and-cubic-ninja.txt
index 4611fd9e09..6fa610f5b7 100644
--- a/_pages/no_NO/ntr-and-cubic-ninja.txt
+++ b/_pages/no_NO/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
**For å benytte [magnetlenker](https://en.wikipedia.org/wiki/Magnet_URI_scheme) du finner i veiledningen trenger du en torrentklient som f.eks. [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja vil kun virke for JPN New 3DS!!!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Det du trenger
diff --git a/_pages/no_NO/ntrboot.txt b/_pages/no_NO/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/no_NO/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/no_NO/region-changing.txt b/_pages/no_NO/region-changing.txt
index fb898fbcc4..c093223f97 100644
--- a/_pages/no_NO/region-changing.txt
+++ b/_pages/no_NO/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Regionensbytte er nesten helt unødvendig, siden Luma3DS støtter multiregions spill og individuelle [tittelregionemulering](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). **
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
**For å benytte [magnetlenker](https://en.wikipedia.org/wiki/Magnet_URI_scheme) du finner i veiledningen trenger du en torrentklient som f.eks. [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Denne prosessen vil delinke NNIDen din fra systemet, siden den vil ikke lenger være kompatibel. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Denne prosessen vil delinke NNIDen din fra systemet, siden den vil ikke lenger v
Etter denne prosessen, vil kun **New3DSer som aldri har vært i eShop før** og **alle Old 3DSer** kunne komme inn i eShop etter å ha lagd en ny NNID for deres nye region. Regionsbyttede New 3DSer som allerede har åpnet eShop i deres originale region, kann ikke lage en ny NNID og få tilgang til eShop i deres nye region!
{: .notice--warning}
-Legg merke til at noen ganger vil eShop uforklarlig fortsatt ikke virke for enheter som de burde virke for. Dette har bare noe med Nintendos servere å gjøre, og jeg har ikke noe kontroll over det.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Legg merke til at noen ganger vil eShop uforklarlig fortsatt ikke virke for enheter som de burde virke for. Dette har bare noe med Nintendos servere å gjøre, og jeg har ikke noe kontroll over det. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Regionsbytte ved hjelp av CTRTransfer (som denne metoden bruker) ser ut til å forårsake nystartspatcher til å ikke fungere mer. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**Du MÅ allerede ha installert Luma3DS og boot9strap eller arm9loaderhax for å bruke dette.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Det du trenger
diff --git a/_pages/no_NO/site-navigation.txt b/_pages/no_NO/site-navigation.txt
index e832870490..18ce69a5d6 100644
--- a/_pages/no_NO/site-navigation.txt
+++ b/_pages/no_NO/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [OSS (Ofte stilte spørsmål)](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Kom i gang (New 3DS)](get-started-(new-3ds))
+ [Kom i gang (Old 3DS)](get-started-(old-3ds))
+ [Kom i gang](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Flytt EmuNAND](move-emunand)
+ [NTR og Cubic Ninja](ntr-and-cubic-ninja)
+ [Region bytte](region-changing)
diff --git a/_pages/no_NO/troubleshooting.txt b/_pages/no_NO/troubleshooting.txt
index 43578c4679..4cc7612231 100644
--- a/_pages/no_NO/troubleshooting.txt
+++ b/_pages/no_NO/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Når en løsning virker for deg, kan du fortsette med hovedveiledningen
(Denne seksjonen er ganske lang, prøv å bruke Ctrl+F for å søke eller ditt problem.)
-{: .notice--primary}
-**Hvis du fortsatt ikke kan løse problemet ditt og trenger å finne hjelp, kopier innholdet i alle relevante .log filer fra roten av SD-kortet ditt inn i en [Gist](https://gist.github.com/), og komm så for hjelp forberedt med en detaljert beskrivelse av problemet ditt og hva du har prøvd.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
**For å benytte [magnetlenker](https://en.wikipedia.org/wiki/Magnet_URI_scheme) du finner i veiledningen trenger du en torrentklient som f.eks. [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS funksjonalitet virker ikke etter guide
diff --git a/_pages/no_NO/uninstall-cfw.txt b/_pages/no_NO/uninstall-cfw.txt
index 2e03cc243e..baa3951ddc 100644
--- a/_pages/no_NO/uninstall-cfw.txt
+++ b/_pages/no_NO/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### Det du trenger
diff --git a/_pages/no_NO/updating-b9s.txt b/_pages/no_NO/updating-b9s.txt
index e12505913c..befe96ac73 100644
--- a/_pages/no_NO/updating-b9s.txt
+++ b/_pages/no_NO/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/pl_PL/9.2.0-ctrtransfer.txt b/_pages/pl_PL/9.2.0-ctrtransfer.txt
index 5034dd1b1d..f4a70a1a45 100644
--- a/_pages/pl_PL/9.2.0-ctrtransfer.txt
+++ b/_pages/pl_PL/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/pl_PL/a9lh-to-b9s.txt b/_pages/pl_PL/a9lh-to-b9s.txt
index 28c13e95a1..34c3b07efc 100644
--- a/_pages/pl_PL/a9lh-to-b9s.txt
+++ b/_pages/pl_PL/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/pl_PL/cart-update.txt b/_pages/pl_PL/cart-update.txt
index b2bb0a53af..8a19670886 100644
--- a/_pages/pl_PL/cart-update.txt
+++ b/_pages/pl_PL/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
Każdy kartridż z grą posiada kopię wersji firmware konsoli która jest wymagana do jej działania, co pozwala każdemu kto korzysta z niższej wersji firmware na użycie kartridżu do zaktualizowania konsoli do tej wersji (nawet bez połączenia internetowego).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. Metoda ta zaktualizuje **tylko** ścisłe firmware konsoli *(na przykład, 2.1.0-0 ->6.0.0-0)*. Ostatnia cyfra, *(-0)*, oznaczająca wersję przeglądarki internetowej, **nie* ulegnie zmianie.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. Metoda ta zaktualizuje **tylko** ścisłe firmware konsoli *(na przykład, 2.1.0-0 ->6.0.0-0)*. Ostatnia cyfra, *(-0)*, oznaczająca wersję przeglądarki internetowej, **nie* ulegnie zmianie.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/pl_PL/credits.txt b/_pages/pl_PL/credits.txt
index d4b90dc968..c349e3fe62 100644
--- a/_pages/pl_PL/credits.txt
+++ b/_pages/pl_PL/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
Jeśli zapomniałem tu o tobie, skontaktuj się ze mną a dodam twoje imię do listy.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/pl_PL/f3-(linux).txt b/_pages/pl_PL/f3-(linux).txt
index 5691c586b4..c6661b022e 100644
--- a/_pages/pl_PL/f3-(linux).txt
+++ b/_pages/pl_PL/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
W zależności od wielkości karty SD i szybkości komputera, proces ten może potrwać nawet kilka godzin!
-{: .notice--info}
Ta strona dotyczy tylko użytkowników systemu Linux. Jeśli nie posiadasz Linuxa, sprawdź strony [H2testw (windows)](h2testw-(windows)) lub [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Czego potrzebujesz
diff --git a/_pages/pl_PL/f3x-(mac).txt b/_pages/pl_PL/f3x-(mac).txt
index fd71f4d852..360c835d17 100644
--- a/_pages/pl_PL/f3x-(mac).txt
+++ b/_pages/pl_PL/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
W zależności od wielkości karty SD i szybkości komputera, proces ten może potrwać nawet kilka godzin!
-{: .notice--info}
Ta strona dotyczy tylko użytkowników systemu Mac. Jeśli nie posiadasz komputera Mac, sprawdź strony [H2testw (windows)](h2testw-(windows)) lub [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### Czego potrzebujesz
diff --git a/_pages/pl_PL/faq.txt b/_pages/pl_PL/faq.txt
index 6e0d5a23ed..cce637b829 100644
--- a/_pages/pl_PL/faq.txt
+++ b/_pages/pl_PL/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Pyt.:** *Mam najnowszą wersję systemu, czy moją konsolę da się przerobić?*
**A:** Yes
-
+
**Pyt.:** *Jak zaktualizować Luma3DS?*
**Odp.:** Użyj Luma3DS Updater
-
+
**Pyt.:** *Słyszałem o tych płatnych rzeczach (Gateway, Sky3DS, etc), czy na prawdę tego potrzebuję?*
**Odp.:** Nie. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Pyt.:** *W jaki sposób mogę przenieść zapisy z Gateway na gry zainstalowane bezpośrednio na konsoli?*
**Odp.:** Zobacz [tutaj](https://gbatemp.net/threads/425743/)
-
+
**Pyt.:** *Co potrzebuję aby ukończyć tę instrukcję?*
**Odp.:** Instrukcja ta może być całkowicie wykonana przy użyciu darmowego oprogramowania
-
+
**Pyt.:** *Jak ryzykowne jest przerobienie mojej konsoli?*
**Odp.: ** Uzyskanie bricka (czyli "uśmiercenie" konsoli) jest obecnie * zasadniczo * niemożliwe, chyba że zignorujesz/obejdziesz wszystkie kroki zapobiegawcze.
-
+
**Pyt.:** *Czy przy tego pomocy mogę uruchomić homebrew i emulatory?*
**Odp.:** Tak! Custom Firmware nie tylko umożliwia ładowanie Homebrew Launchera, ale także działa na wszystkich wersjach firmware, co oznacza, że można je zachować na zawsze, nawet po jego aktualizacji.
-
+
**Pyt.:** *Czy da się użyć tego do uruchomienia gier sprowadzanych z innych regionów (np. japońskie, amerykańskie)?*
**Odp.:** Luma3DS ma funkcje usuwające zabezpieczenia regionalne. Dzięki nim możesz zainstalować gry z dowolnego kraju bez żadnych dodatkowych modyfikacji.
-
+
**Pyt.:** *Czy aktualizowanie SysNAND CFW jest bezpieczne?*
**Odp.:** Tak. Tak długo jak posiadasz A9LH, jest to bezpieczne, przestań pytać.
-
+
**Pyt.:** *Gdzie uzyskam pomoc?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Pyt.:** *Czy wystarczy mi karta pamięci SD 4GB (lub mniejsza)?*
**Odp.:** Tak!
-
+
**Pyt.:** *Czy mogę użyć karty pamięci SD 128GB (lub większej)?*
**Odp.:** Tak, choć część ludzi zgłasza spowolnienia w działaniu konsoli przy używaniu kart pamięci o tak dużej pojemności. Pamiętaj że karta musi być sformatowana w systemie plików FAT32, nie exFAT.
-
+
**Pyt.:** *W jaki sposob mogę przenieść wszystko na nową kartę SD po ukończeniu instrukcji?*
**Odp.:** Wystarczy skopiować wszystkie pliki do nowej karty SD.
-
+
**Pyt.:** *Czy zatrzymam swój NNID?*
**Odp.:** Jeżeli rozpoczynasz z NNID powiązanym z konsolą i wykonasz każdy krok instrukcji, nie ulegnie to zmianie po jej ukończeniu.
-
+
**Pyt.:** *Co z System Transferami?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Pyt.:** *Czy mogę wykonać tę instrukcję bez dostępu do komputera (np. z telefonem na Androidzie)?*
**Odp.:** Tak, o ile masz możliwość kopiowania plików na kartę SD swojej konsoli!
-
+
**Pyt.:** *Pomocy! Stało się coś złego i konsola nie chce się włączyć...*
**Odp.:** Sprawdź [instrukcję rozwiązywania problemów](troubleshooting).
diff --git a/_pages/pl_PL/file-extensions-(windows).txt b/_pages/pl_PL/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/pl_PL/file-extensions-(windows).txt
+++ b/_pages/pl_PL/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/pl_PL/finalizing-setup.txt b/_pages/pl_PL/finalizing-setup.txt
index 4b0d16294f..f930f8758c 100644
--- a/_pages/pl_PL/finalizing-setup.txt
+++ b/_pages/pl_PL/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Przegląd kroków
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
W naszym przypadku, używamy Luma3DS autorstwa [AuroraWright](https://github.com/AuroraWright/) do bezpośredniego startu ze zmodyfikowanego SysNAND, co pozwala na zupełną rezygnację z korzystania z EmuNAND i znacznie upraszcza obsługę zhackowanego 3DS oraz nie zużywa miejsca na karcie SD.
-
+
Podczas tego procesu zainstalujemy również takie programy jak:
+ **FBI** *(instaluje gry i programy w formacie CIA)*
@@ -18,10 +17,6 @@ Podczas tego procesu zainstalujemy również takie programy jak:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Czego potrzebujesz
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-Teraz możesz używać Luma3DS Updater aby aktualizować Luma3DS do najnowszej wersji, wystarczy go uruchomić i nacisnąć (A).
+Teraz możesz używać Luma3DS Updater aby aktualizować Luma3DS do najnowszej wersji, wystarczy go uruchomić i nacisnąć (A).
+
To nie jest to samo co System Update; Luma3DS Updater pobiera i wypakowuje wyłącznie najnowsze pliki Luma3DS.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
Zawsze możesz dostać się do menu konfiguracji Luma3DS, przytrzymując (Select) podczas uruchamiania konsoli.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/pl_PL/flashing-ntrboot-(custom-firmware).txt b/_pages/pl_PL/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..cba36237c3
--- /dev/null
+++ b/_pages/pl_PL/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Czego potrzebujesz
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instrukcje
+
+##### Sekcja I - Przygotowania
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Poczekaj na zakończenie procesu
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Poczekaj na zakończenie procesu
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/pl_PL/flashing-ntrboot-(powersaves).txt b/_pages/pl_PL/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/pl_PL/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/pl_PL/get-started-(new-3ds).txt b/_pages/pl_PL/get-started-(new-3ds).txt
index e59e8ea916..d65c30651b 100644
--- a/_pages/pl_PL/get-started-(new-3ds).txt
+++ b/_pages/pl_PL/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Wybierz odpowiednią podstronę dla swojej wersji firmware z poniższej tabeli.
-{: .notice--primary}
+Wybierz odpowiednią podstronę dla swojej wersji firmware z poniższej tabeli. Note that the "from" and "to" fields are inclusive. To oznacza, przykładowo, iż wiersz "od 9.0.0 do 9.2.0" zawiera wersje firmware 9.0.0, 9.1.0 oraz 9.2.0.
-Note that the "from" and "to" fields are inclusive. To oznacza, przykładowo, iż wiersz "od 9.0.0 do 9.2.0" zawiera wersje firmware 9.0.0, 9.1.0 oraz 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/pl_PL/get-started-(old-3ds).txt b/_pages/pl_PL/get-started-(old-3ds).txt
index 8df095383b..eb22a4add1 100644
--- a/_pages/pl_PL/get-started-(old-3ds).txt
+++ b/_pages/pl_PL/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Wybierz odpowiednią podstronę dla swojej wersji firmware z poniższej tabeli.
-{: .notice--primary}
+Wybierz odpowiednią podstronę dla swojej wersji firmware z poniższej tabeli. Note that the "from" and "to" fields are inclusive. To oznacza, przykładowo, iż wiersz "od 9.0.0 do 9.2.0" zawiera wersje firmware 9.0.0, 9.1.0 oraz 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Jeżeli ta wersja to -0 znaczy to, że nie posiadasz przeglądarki, każda cyfra powyżej -0 oznacza zainstalowaną przeglądarkę internetową.
-{% capture notice-1 %}
-Pierwsze dwie kolumny dotyczą ostatniego numeru twojej wersji softu (która odpowiada wersji wbudowanej przeglądarki internetowej). Jeżeli ta wersja to -0 znaczy to, że nie posiadasz przeglądarki, każda cyfra powyżej -0 oznacza zainstalowaną przeglądarkę internetową.
-
-Pola "od" i "do" są włączne. To oznacza, przykładowo, iż wiersz "od 9.0.0 do 9.2.0" zawiera wersje firmware 9.0.0, 9.1.0 oraz 9.2.0.
-
Na przykładzie wersji "5.0.0-0U": wziąłbyś pod uwagę kolumnę "Brak przeglądarki" oraz wiersz "5.0.0 do 5.1.0" ponieważ konsola ma wersję softu zawierającą się w tym przedziale i nie ma na niej przeglądarki.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Jeżeli wykonałeś aktualizację firmware z kartridżu zawierającego wersję 9.9.0 lub wyższą *(tzn. masz obecnie firmware 9.9.0 lub powyżej, ale przed aktualizacją, przeglądarka internetowa była w wersji -25 lub niższej, np. 10.2.0-24)*, po aktualizacji przeglądarka została usunięta i powinieneś użyć kolumny "Brak przeglądarki".
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+Jeżeli wykonałeś aktualizację firmware z kartridżu zawierającego wersję 9.9.0 lub wyższą *(tzn. masz obecnie firmware 9.9.0 lub powyżej, ale przed aktualizacją, przeglądarka internetowa była w wersji -25 lub niższej, np. 10.2.0-24)*, po aktualizacji przeglądarka została usunięta i powinieneś użyć kolumny "Brak przeglądarki".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/pl_PL/get-started.txt b/_pages/pl_PL/get-started.txt
index 1dc99a7691..7e845b4b03 100644
--- a/_pages/pl_PL/get-started.txt
+++ b/_pages/pl_PL/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Ta strona pomoże ci w określeniu, od czego rozpocząć w wypadku twojej konsoli.
-Kolory konsol na obrazkach mogą być różne, ale zwróć uwagę na położenie przycisków i inne cechy widoczne na obrazkach by upewnić się, że wybrałeś właściwy model.
-{: .notice}
-
-Kliknij na obrazek przedstawiający model twojej konsoli, aby przejść na odpowiednią podstronę.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. Ta strona pomoże ci w określeniu, od czego rozpocząć w wypadku twojej konsoli.
-{: .notice--info}
+Kliknij na obrazek przedstawiający model twojej konsoli, aby przejść na odpowiednią podstronę. Kolory konsol na obrazkach mogą być różne, ale zwróć uwagę na położenie przycisków i inne cechy widoczne na obrazkach by upewnić się, że wybrałeś właściwy model.
Jeżeli przerobiłeś już wcześniej swojego 3DSa i masz obecnie konfigurację CFW z EmuNAND, wykonuj następne kroki używając SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Zanim rozpoczniesz, zastanów się nad sprawdzeniem swojej karty SD pod kątem błędów, przy użyciu programu [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), lub [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/pl_PL/godmode9-usage.txt b/_pages/pl_PL/godmode9-usage.txt
index e6a72e0f65..9ca43bd634 100644
--- a/_pages/pl_PL/godmode9-usage.txt
+++ b/_pages/pl_PL/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/pl_PL/h2testw-(windows).txt b/_pages/pl_PL/h2testw-(windows).txt
index 8a8372ea7a..2da524d8ed 100644
--- a/_pages/pl_PL/h2testw-(windows).txt
+++ b/_pages/pl_PL/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
W zależności od wielkości karty SD i szybkość komputera proces ten może potrwać nawet kilka godzin!
-{: .notice--info}
Ta strona dotyczy tylko użytkowników systemu Windows. Jeśli nie jesteś na Windows, sprawdź [F3 (linux)](f3-(linux)) lub [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Czego potrzebujesz
diff --git a/_pages/pl_PL/home.txt b/_pages/pl_PL/home.txt
index 49b39b2ff9..d1883842d8 100644
--- a/_pages/pl_PL/home.txt
+++ b/_pages/pl_PL/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") pozwala ci na używanie bardziej zaawansowanych hacków, czego zwykły dostęp do homebrew nie może łatwo zrobić. Przykładowo, patch podpisów pozwala ci na instalację niepodpisanych tytułów które pojawiają się bezpośrednio w HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Co jest celem tej instrukcji?
diff --git a/_pages/pl_PL/homebrew-launcher-(alternatives).txt b/_pages/pl_PL/homebrew-launcher-(alternatives).txt
index eb1fdedfba..1160ff8c5c 100644
--- a/_pages/pl_PL/homebrew-launcher-(alternatives).txt
+++ b/_pages/pl_PL/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### Czego potrzebujesz
diff --git a/_pages/pl_PL/homebrew-launcher-(soundhax).txt b/_pages/pl_PL/homebrew-launcher-(soundhax).txt
index a7dfed2496..46060cbbb3 100644
--- a/_pages/pl_PL/homebrew-launcher-(soundhax).txt
+++ b/_pages/pl_PL/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Homebrew Launcher ma wiele punktów wejścia - sposobów na jego uruchomienie.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/pl_PL/installing-boot9strap-(browser).txt b/_pages/pl_PL/installing-boot9strap-(browser).txt
index 4135671a8a..6207678567 100644
--- a/_pages/pl_PL/installing-boot9strap-(browser).txt
+++ b/_pages/pl_PL/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Zauważ, że terminy EmuNand i RedNAND odnoszą się do nieco innych implementacji [tej samej idei] (http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Czego potrzebujesz
diff --git a/_pages/pl_PL/installing-boot9strap-(dsiware).txt b/_pages/pl_PL/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/pl_PL/installing-boot9strap-(dsiware).txt
+++ b/_pages/pl_PL/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/pl_PL/installing-boot9strap-(dsiware-game-injection).txt b/_pages/pl_PL/installing-boot9strap-(dsiware-game-injection).txt
index f2ea5496c7..8f6a065824 100644
--- a/_pages/pl_PL/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/pl_PL/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Czego potrzebujesz
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/pl_PL/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/pl_PL/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/pl_PL/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/pl_PL/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/pl_PL/installing-boot9strap-(dsiware-save-injection).txt b/_pages/pl_PL/installing-boot9strap-(dsiware-save-injection).txt
index 6aadb9a8ab..9a2694be5a 100644
--- a/_pages/pl_PL/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/pl_PL/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Czego potrzebujesz
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/pl_PL/installing-boot9strap-(hardmod).txt b/_pages/pl_PL/installing-boot9strap-(hardmod).txt
index 630d092149..b9406e0bab 100644
--- a/_pages/pl_PL/installing-boot9strap-(hardmod).txt
+++ b/_pages/pl_PL/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### Czego potrzebujesz
diff --git a/_pages/pl_PL/installing-boot9strap-(homebrew-launcher).txt b/_pages/pl_PL/installing-boot9strap-(homebrew-launcher).txt
index 9236209bed..466c75541d 100644
--- a/_pages/pl_PL/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/pl_PL/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Zauważ, że terminy EmuNand i RedNAND odnoszą się do nieco innych implementacji [tej samej idei] (http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instrukcje
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Jeśli konsola się zawiesi, przytrzymaj przycisk power aby ją wyłączyć i spróbuj ponownie
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/pl_PL/installing-boot9strap-(mset).txt b/_pages/pl_PL/installing-boot9strap-(mset).txt
index 01cb08cf90..491370b900 100644
--- a/_pages/pl_PL/installing-boot9strap-(mset).txt
+++ b/_pages/pl_PL/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Zauważ, że terminy EmuNand i RedNAND odnoszą się do nieco innych implementacji [tej samej idei] (http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Czego potrzebujesz
diff --git a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..c989febfa4
--- /dev/null
+++ b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Czego potrzebujesz
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Najnowszą wersję [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(plik`.7z`)*
+* Pakietu startowego [Homebrew](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instrukcje
+
+##### Sekcja I - Przygotowania
+
+1. Power off your device
+1. Włóż kartę SD do komputera
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Włóż kartę SD do komputera
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Poczekaj na zakończenie procesu
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/pl_PL/move-emunand.txt b/_pages/pl_PL/move-emunand.txt
index b280c8b34f..7b7d712503 100644
--- a/_pages/pl_PL/move-emunand.txt
+++ b/_pages/pl_PL/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Zauważ, że terminy EmuNand i RedNAND odnoszą się do nieco innych implementacji [tej samej idei] (http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/pl_PL/ntr-and-cubic-ninja.txt b/_pages/pl_PL/ntr-and-cubic-ninja.txt
index 06715f350e..879e6e1288 100644
--- a/_pages/pl_PL/ntr-and-cubic-ninja.txt
+++ b/_pages/pl_PL/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja zadziała TYLKO dla New 3DS z regionu JPN!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Czego potrzebujesz
diff --git a/_pages/pl_PL/ntrboot.txt b/_pages/pl_PL/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/pl_PL/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/pl_PL/region-changing.txt b/_pages/pl_PL/region-changing.txt
index f67388d275..9ac0df37ad 100644
--- a/_pages/pl_PL/region-changing.txt
+++ b/_pages/pl_PL/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Zmiana regionu jest prawie zupełnie niepotrzebna odkąd Luma3DS obsługuje gry spoza regionu konsoli, a także indywidualną [emulację regionu danego tytułu](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Ten proces odłączy twój NNID od konsoli, ponieważ po zmianie regionu nie będzie z nią dłużej kompatybilny. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Ten proces odłączy twój NNID od konsoli, ponieważ po zmianie regionu nie bę
Po zakończeniu tej procedury, wyłącznie **New 3DS, który nigdy wcześniej nie załadował eShop** oraz **każdy Old 3DS** będą miały dostęp do eShop po utworzeniu nowego NNID w ich nowym regionie. New 3DS, który załadował eShop chociaż raz w swoim ojczystym regionie, nie będzie mógł utworzyć nowego NNID oraz skorzystać z eShop w swoim nowym regionie!
{: .notice--warning}
-Należy zaznaczyć, że sporadycznie, z nieznanych przyczyn eShop nie działa nawet na konsolach, na których powinien. Jest to całkowicie po stronie serwerów Nintendo, i naprawdę nie mam nad tym żadnej kontroli.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Należy zaznaczyć, że sporadycznie, z nieznanych przyczyn eShop nie działa nawet na konsolach, na których powinien. Jest to całkowicie po stronie serwerów Nintendo, i naprawdę nie mam nad tym żadnej kontroli. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Czego potrzebujesz
diff --git a/_pages/pl_PL/site-navigation.txt b/_pages/pl_PL/site-navigation.txt
index 00a07fc253..34d6760ccc 100644
--- a/_pages/pl_PL/site-navigation.txt
+++ b/_pages/pl_PL/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [Często zadawane pytania (FAQ)](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Rozpocznij (New 3DS)](get-started-(new-3ds))
+ [Rozpocznij (Old 3DS)](get-started-(old-3ds))
+ [Rozpocznij](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Przenoszenie EmuNAND](move-emunand)
+ [NTR i Cubic Ninja](ntr-and-cubic-ninja)
+ [Zmiana regionu](region-changing)
diff --git a/_pages/pl_PL/troubleshooting.txt b/_pages/pl_PL/troubleshooting.txt
index 8d16f67768..6be8f9b3cf 100644
--- a/_pages/pl_PL/troubleshooting.txt
+++ b/_pages/pl_PL/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Kiedy rozwiążesz swój problem, możesz kontynuować z główną instrukcją
(Ta sekcja jest dosyć długa, spróbuj użyć Ctrl+F aby wyszukać swój problem.)
-{: .notice--primary}
-**Jeśli nadal nie możesz rozwiązać swojego problemu i potrzebujesz szerszej pomocy, wklej zawartość wszystkich istotnych plików .log znajdujących się w katalogu głównym twojej karty SD do [Gist](https://gist.github.com/). Zapytując o pomoc zamieść dokładny opis twojego problemu i kroki które już podjąłeś, aby go rozwiązać.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## Tryb DSi / DS nie działa prawidłowo po ukończeniu instrukcji
diff --git a/_pages/pl_PL/uninstall-cfw.txt b/_pages/pl_PL/uninstall-cfw.txt
index e02c5cb86e..92325d667f 100644
--- a/_pages/pl_PL/uninstall-cfw.txt
+++ b/_pages/pl_PL/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### Czego potrzebujesz
diff --git a/_pages/pl_PL/updating-b9s.txt b/_pages/pl_PL/updating-b9s.txt
index a48401fbed..c7f0ef7c44 100644
--- a/_pages/pl_PL/updating-b9s.txt
+++ b/_pages/pl_PL/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/pt_BR/9.2.0-ctrtransfer.txt b/_pages/pt_BR/9.2.0-ctrtransfer.txt
index a04c8df28c..cc3e108227 100644
--- a/_pages/pt_BR/9.2.0-ctrtransfer.txt
+++ b/_pages/pt_BR/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "CTRTransfer para 9.2.0"
---
Esta é uma página adicional para a instalação de uma imagem CTRTransfer 9.2.0 no seu dispositivo.
-{: .notice--primary}
Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nesta página, você precisará de um cliente de torrent como o [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` na pasta `/luma/payloads/` do seu cartão SD, segure (Start) durante a inicialização para exibir um "menu de chainloader" onde você terá que utilizar os botões direcionais e o botão (A) para selecionar "GodMode9" para estas instruções.
-{: .notice--info}
Nunca formate um New 2DS enquanto estiver em uma versão <11.4.0 ou você não conseguirá completar a configuração inicial!
{: .notice--danger}
diff --git a/_pages/pt_BR/a9lh-to-b9s.txt b/_pages/pt_BR/a9lh-to-b9s.txt
index 33e776b37b..516dd70ab9 100644
--- a/_pages/pt_BR/a9lh-to-b9s.txt
+++ b/_pages/pt_BR/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "Atualizando para o B9S"
---
Esta página é para usuários de uma instalção arm9loaderhax pré existente atualizarem seus dispositivos para boot9strap.
-{: .notice--info}
Todas as versões futuras do Luma3DS serão liberadas apenas no formato `.firm`, que só será compatível com com boot9strap e o sighax. Isto significa que você deve utilizar esta página para atualizar sua instalação, só assim você irá continuar recebendo as atualizações mais recentes do Luma3DS.
-{: .notice--info}
+
+Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nesta página, você precisará de um cliente de torrent, como o [Deluge](http://dev.deluge-torrent.org/wiki/Download)
Se você tiver um PIN habilitado no Luma3DS, SafeB9SInstaller lhe dará um erro "OTP Crypto Fail" a menos que você desabilite temporariamente o seu PIN (você pode reativar o PIN após a atualização).
{: .notice--warning}
-Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nesta página, você precisará de um cliente de torrent, como o [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
Há relatos de uma onda de bans sendo feita a usuários de CFW pela Nintendo. Para se proteger, por favor siga os seguintes passos antes de iniciar este guia:
diff --git a/_pages/pt_BR/cart-update.txt b/_pages/pt_BR/cart-update.txt
index 1641f83747..e4ce63dd83 100644
--- a/_pages/pt_BR/cart-update.txt
+++ b/_pages/pt_BR/cart-update.txt
@@ -3,20 +3,18 @@ title: "Atualização por Cartucho"
---
Qualquer cartucho possui uma cópia da versão de sistema necessária para poder jogá-lo, permitindo que qualquer um com uma versão inferior use o cartucho para atualizar para aquela versão (mesmo sem conexão com a Internet).
-{: .notice--info}
{% capture notice-1 %}
Note que atualizações por Cartucho só fornecerão atualizações para recursos principais do sistema, tais como Configuração do console, Menu HOME, etc. Atualizações por Cartucho não fornecerão atualizações para o Som Nintendo 3DS e recursos de rede, tais como Transferência de dados, Navegador de Internet, StreetPass, Mii Plaza ou eShop.
-
+
Isto significa que usar um Update por Cartucho de uma versão contendo uma versão mais antiga do Som Nintendo 3DS *(7.0.0 para Old 3DSs na região EUR, JPN, KOR e EUA)* para uma que introduziu uma nova versão do Som Nintendo 3DS irá estragar o funcionamento do [Soundhax](homebrew-launcher-(soundhax))! Você vai precisar de um [método alternativo](homebrew-launcher-(alternatives)) para iniciar o Homebrew Launcher!
+
+Isso também significa que uma atualização por cartucho NÃO irá instalar um navegador, caso ainda não tenha um. Isto irá **apenas** atualizar a versão do sistema propriamente dita *(por exemplo, 2.1.0-0 -> 6.0.0-0)*. O último número *(o -0)* **não** irá mudar.
{% endcapture %}
{{ notice-1 | markdownify }}
-Isso também significa que uma atualização por cartucho NÃO irá instalar um navegador, caso ainda não tenha um. Isto irá **apenas** atualizar a versão do sistema propriamente dita *(por exemplo, 2.1.0-0 -> 6.0.0-0)*. O último número *(o -0)* **não** irá mudar.
-{: .notice--warning}
-
**Atualizar com um cartucho de jogo contendo uma versão 9.9.0 ou acima irá remover o seu navegador até que uma atualização online padrão seja executada!**
{: .notice--danger}
diff --git a/_pages/pt_BR/credits.txt b/_pages/pt_BR/credits.txt
index e7e9d3a304..77e971dc54 100644
--- a/_pages/pt_BR/credits.txt
+++ b/_pages/pt_BR/credits.txt
@@ -9,7 +9,6 @@ title: "Créditos"
{: .notice--primary}
Se eu esqueci de você aqui, entre em contato comigo e eu adicionarei o seu nome.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/pt_BR/f3-(linux).txt b/_pages/pt_BR/f3-(linux).txt
index 9ff0902296..7dcf3cc12c 100644
--- a/_pages/pt_BR/f3-(linux).txt
+++ b/_pages/pt_BR/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
Esta é uma seção adicional para verificar erros no seu cartão SD usando F3.
-{: .notice--info}
Dependendo do tamanho do seu cartão SD e da velocidade do seu computador, este processo pode demorar até várias horas!
-{: .notice--info}
Esta página é destinada apenas a usuários do Linux. Se você não estiver no Linux, confira as páginas [H2testw (windows)](h2testw-(windows)) ou [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### O que você precisa
diff --git a/_pages/pt_BR/f3x-(mac).txt b/_pages/pt_BR/f3x-(mac).txt
index 6dd6337242..c5373685d2 100644
--- a/_pages/pt_BR/f3x-(mac).txt
+++ b/_pages/pt_BR/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
Esta é uma seção adicional para verificar erros no seu cartão SD usando F3X.
-{: .notice--info}
Dependendo do tamanho do seu cartão SD e da velocidade do seu computador, este processo pode demorar até várias horas!
-{: .notice--info}
Esta página é destinada apenas a usuários do Mac. Se você não estiver no Mac, confira as páginas [H2testw (windows)](h2testw-(windows)) ou [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### O que você precisa
diff --git a/_pages/pt_BR/faq.txt b/_pages/pt_BR/faq.txt
index 6dc07aa921..ff98523f8f 100644
--- a/_pages/pt_BR/faq.txt
+++ b/_pages/pt_BR/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**P:** *Estou na última versão do sistema, posso usar um hack no meu dispositivo?*
**R:** Sim
-
+
**P:** *Como eu atualizo o Luma3DS?*
**R:** Use o Luma3DS Updater
-
+
**P:** *Eu ouvi falar sobre essa coisa que tenho de comprar (Gateway, Sky3DS, etc), isso é algo que eu preciso?*
**R:** Não. boot9strap é um método superior de carregar hax que é executado cedo na inicialização.
-
+
**P:** *Como eu transfiro saves do Gateway para jogos instalados no dispositivo?*
**R:** Veja [isto](https://gbatemp.net/threads/425743/)
-
+
**P:** *Do que eu preciso para este guia?*
**R:** Este guia pode ser executado completamente usando software livre
-
+
**P:** *O quão arriscado é usar um hack no meu console?*
**R:** Bricks agora são *basicamente* impossíveis a menos que você ignore/pule quaisquer verificações de segurança.
-
+
**P:** *Posso rodar homebrews e emuladores incríveis com isso?*
**R:** Sim! Custom Firmware não só lhe dá acesso ao Homebrew Launcher, como também a hacks em todas as versões, o que significa que você o mantém permanentemente, mesmo que atualize.
-
+
**P:** *Posso usar isso para jogar jogos de outras regiões?*
**R:** O Luma3DS suporta patches de Region Free, o que permite aos usuários instalar jogos de qualquer região sem modificações ou etapas extras.
-
+
**P:** *É seguro atualizar a SysNAND com CFW?*
**R:** Sim. Isso é seguro, parem de perguntar sobre isso.
-
+
**P:** *Onde devo buscar suporte?*
**R:** Para suporte, peça ajuda em [Nintendo Homebrew no Discord](https://discord.gg/MWxPgEp).
-
+
**P:** *Posso fazer isso com um cartão SD de 4GB (ou menor)?*
**R:** Sim!
-
+
**P:** *Posso usar um cartão SD de 128 GB (ou maior)?*
**R:** Pode, mas alguns usuários relataram lentidão usando cartões SD desse tamanho. Note que o não pode formatar o cartão com exFAT; você precisa formatá-lo com FAT32.
-
+
**P:** *Como mudo para um cartão SD novo no final disso?*
**R:** Apenas copie todos os arquivos para o novo cartão SD.
-
+
**P:** *Posso manter minha NNID?*
**R:** Se você começar com uma NNID vinculada e seguir todas as etapas, você continuará com ela no final.
-
+
**P:** *E as transferências de dados?*
**R:** Uma vez que você tenha completado o guia, você pode fazer transferência de dados de e para um 3DS ou 2DS com B9S da mesma forma que faria num console normal ou com EmuNAND (você perderá quaisquer jogos/temas/DLCs não legítimos na transferência; os saves permanecerão mesmo para os jogos perdidos).
-
+
**P:** *Posso fazer isso sem um computador (ex. com um celular Android)?*
**R:** Pode, tudo que você precisa é a habilidade de colocar os arquivos no cartão SD!
-
+
**P:** *Socorro! Algo ruim aconteceu e agora não consigo ligar...*
**R:** Por favor, consulte o [guia de troubleshooting](troubleshooting).
diff --git a/_pages/pt_BR/file-extensions-(windows).txt b/_pages/pt_BR/file-extensions-(windows).txt
index d4367cf58a..39e0390882 100644
--- a/_pages/pt_BR/file-extensions-(windows).txt
+++ b/_pages/pt_BR/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "Extensões de Arquivos (Windows)"
---
Esta é uma seção adicional para desabilitar o comportamento padrão do Windows de esconder as extensões dos arquivos.
-{: .notice--info}
Isto facilitará para você encontrar os arquivos referenciados no restante deste guia.
-{: .notice--info}
#### Instruções
diff --git a/_pages/pt_BR/finalizing-setup.txt b/_pages/pt_BR/finalizing-setup.txt
index 08864f1292..8eda6da31d 100644
--- a/_pages/pt_BR/finalizing-setup.txt
+++ b/_pages/pt_BR/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizando a instalação"
#### Visão geral das etapas
-{% capture notice-2 %}
O arquivo `boot.firm` é o que é executado pelo boot9strap depois que ele acaba de carregar a NAND, e ele pode ser qualquer payload arm9 válido no formato FIRM. Este arquivo pode ser substituído a qualquer momento, embora o Luma3DS permita a inicialização de outros payloads arm9 no formato FIRM usando o chainloader do Luma3DS.
-
+
Neste caso, usamos o Luma3DS por [AuroraWright](https://github.com/AuroraWright/) para carregar uma SysNAND com patches diretamente, o que nos permite evitar a necessidade de qualquer tipo de EmuNAND, simplificando enormemente o uso de um 3DS hackeado, além de economizar espaço no cartão SD.
-
+
Durante este processo, também configuramos alguns programas como os seguintes:
+ **FBI** *(Instala jogos e aplicativos no formato CIA)*
@@ -18,10 +17,6 @@ Durante este processo, também configuramos alguns programas como os seguintes:
+ **GodMode9** *(Ferramenta multiuso com funções de NAND e cartucho)*
+ **Homebrew Launcher Loader** *(inicia o Homebrew Launcher como um aplicativo normal, graças à mágica do Rosalina)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### O que você precisa
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
___
{% capture notice-10 %}
-Você pode usar o Luma3DS Updater para atualizar o seu Luma3DS para a última versão abrindo-o e apertando (A).
+Você pode usar o Luma3DS Updater para atualizar o seu Luma3DS para a última versão abrindo-o e apertando (A).
+
Isso não é a mesma coisa que uma atualização do sistema; ele apenas faz o download e extrai os arquivos mais recentes do Luma3DS.
+
Isso só atualizará os arquivos do Luma3DS no seu cartão SD. Se você inicializar o seu dispositivo sem um cartão SD, ele usará a versão que você colocou na CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ Isso só atualizará os arquivos do Luma3DS no seu cartão SD. Se você iniciali
{% capture notice-6 %}
Você agora irá inicializar o CFW Luma3DS na SysNAND por padrão.
+
Agora você pode segurar (Select) durante a inicialização para abrir o menu de configuração do Luma3DS.
+
Agora você pode segurar (Start) durante a inicialização para abrir o menu do chainloader do Luma3DS (note que este menu só será mostrado se existir mais de um payload detectado).
+
Agora você pode segurar (Start) + (Select) + (X) durante a inicialização para criar cópias do ARM11 bootrom (`boot11.bin`), do ARM9 bootrom (`boot9.bin`) e do OTP único do seu dispositivo (`OTP.bin`) na pasta `/boot9strap/` no seu cartão SD (note que isso não terá nenhum tipo de aviso ou mensagem).
+
Agora você pode apertar (L) + (Baixo) + (Select) enquanto o sistema está ligado para abrir o menu Rosalina integrado ao Luma3DS. Para uma lista completa das funções de Rosalina, por favor veja o [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ Para usar [NTR CFW](https://github.com/44670/BootNTR/), instale [BootNTR Selecto
{% capture notice-7 %}
Remova quaisquer pastas e arquivos extras da raiz do seu cartão SD que *não* estejam na seguinte imagem. Se tiver, deixe a pasta `DCIM` pois ela contém todas as fotos tiradas com a câmera do 3DS:
-
+
{% endcapture %}
diff --git a/_pages/pt_BR/flashing-ntrboot-(custom-firmware).txt b/_pages/pt_BR/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..02e9d29faa
--- /dev/null
+++ b/_pages/pt_BR/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### O que você precisa
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instruções
+
+##### Seção I - Trabalho Preparatório
+
+1. Desligue o ** 3DS de origem**
+1. Insira o cartão SD do **3ds de origem** no seu computador
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Aguarde até que o processo seja concluído
+1. Aperte (B) para retornar para o menu principal
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Aguarde até que o processo seja concluído
+1. Aperte (B) para retornar para o menu principal
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/pt_BR/flashing-ntrboot-(powersaves).txt b/_pages/pt_BR/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/pt_BR/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/pt_BR/get-started-(new-3ds).txt b/_pages/pt_BR/get-started-(new-3ds).txt
index 90deacb11a..4eeafcb7bd 100644
--- a/_pages/pt_BR/get-started-(new-3ds).txt
+++ b/_pages/pt_BR/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Começar (New 3DS)"
---
-Selecione a página correspondente à sua versão na tabela abaixo.
-{: .notice--primary}
+Selecione a página correspondente à sua versão na tabela abaixo. Note que os campos "de" e "para" são inclusivos. Isso significa que, por exemplo, a linha "de 9.0.0 para 9.2.0" inclui o 9.0.0, 9.1.0 e 9.2.0.
-Note que os campos "de" e "para" são inclusivos. Isso significa que, por exemplo, a linha "de 9.0.0 para 9.2.0" inclui o 9.0.0, 9.1.0 e 9.2.0.
-{: .notice--info}
-
-Note que o último número da versão do seu sistema (que é precedida por um traço) refere-se a sua versão do navegador. Atualmente, a versão do navegador é irrelevante para o New 3DS neste guia.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Atualmente, a versão do navegador é irrelevante para o New 3DS neste guia.
Em todas as versões, você pode fazer uma [Atualização por Cartucho](cart-update) para uma versão superior na mesma coluna e seguir as instruções da nova versão.
-{: .notice--info}
A versão do seu dispositivo pode ser encontrada no canto inferior direito da tela superior na Confirguração do Console.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ A versão do seu dispositivo pode ser encontrada no canto inferior direito da te
TODAS AS VERSÕES
|
- Instalando boot9strap (ntrboothax)
(Requer um Flashcart Compatível) or Instalando boot9strap (Hardmod)
(Requer Solda) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/pt_BR/get-started-(old-3ds).txt b/_pages/pt_BR/get-started-(old-3ds).txt
index 6df6138962..ec955ed77a 100644
--- a/_pages/pt_BR/get-started-(old-3ds).txt
+++ b/_pages/pt_BR/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Começar (Old 3DS)"
---
-Selecione a página correspondente à sua versão na tabela abaixo.
-{: .notice--primary}
+Selecione a página correspondente à sua versão na tabela abaixo. Note que os campos "de" e "para" são inclusivos. Isso significa que, por exemplo, a linha "de 9.0.0 para 9.2.0" inclui o 9.0.0, 9.1.0 e 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Se a versão for -0, então você não tem um navegador, enquanto que qualquer número acima de -0 indica que um navegador está instalado.
-{% capture notice-1 %}
-As duas últimas colunas da tabela referem-se ao último número da sua versão (que corresponde à versão do navegador instalada no sistema). Se a versão for -0, então você não tem um navegador, enquanto que qualquer número acima de -0 indica que um navegador está instalado.
-
-Os campos "de" e "para" são inclusivos. Isso significa que, por exemplo, a linha "de 9.0.0 para 9.2.0" inclui o 9.0.0, 9.1.0 e 9.2.0.
-
No caso da versão "5.0.0-0U" por exemplo, você seguiria a coluna "Sem Navegador" e a linha 5.0.0 a 5.1.0 porque o sistema está na versão do sistema nesse intervalo e não possui navegador instalado.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
Em todas as versões, você pode fazer uma [Atualização por Cartucho](cart-update) para uma versão superior na mesma coluna e seguir as instruções da nova versão.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note que atualizações por Cartucho só fornecerão atualizações para recursos principais do sistema, tais como Configuração do console, Menu HOME, etc. Atualizações por Cartucho não fornecerão atualizações para o Som Nintendo 3DS e recursos de rede, tais como Transferência de dados, Navegador de Internet, StreetPass, Mii Plaza ou eShop.
-
-Isto significa que usar um Update por Cartucho de uma versão contendo uma versão mais antiga do Som Nintendo 3DS *(7.0.0 para Old 3DSs na região EUR, JPN, KOR e EUA)* para uma que introduziu uma nova versão do Som Nintendo 3DS irá estragar o funcionamento do [Soundhax](homebrew-launcher-(soundhax))! Você vai precisar de um [método alternativo](homebrew-launcher-(alternatives)) para iniciar o Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Se você atualizou com um cartucho contendo a versão 9.9.0 ou superior *(o que significa que você tem uma versão em 9.9.0 ou superior, mas seu navegador está em -25 ou inferior, como 10.2.0-24)*, seu navegador foi removido e você precisará usar a coluna "Sem Navegador".
-{: .notice--warning}
A versão do seu dispositivo pode ser encontrada no canto inferior direito da tela superior na Confirguração do Console.
-{: .notice--success}
{: .notice--info}
+Se você atualizou com um cartucho contendo a versão 9.9.0 ou superior *(o que significa que você tem uma versão em 9.9.0 ou superior, mas seu navegador está em -25 ou inferior, como 10.2.0-24)*, seu navegador foi removido e você precisará usar a coluna "Sem Navegador".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/pt_BR/get-started.txt b/_pages/pt_BR/get-started.txt
index a501ad4e5c..3f09ab9086 100644
--- a/_pages/pt_BR/get-started.txt
+++ b/_pages/pt_BR/get-started.txt
@@ -2,23 +2,14 @@
title: "Começar"
---
-Esta página é para instruções de como instalar boot9strap em um 3DS ou 2DS *sem modificações*. Se você já tem o arm9loaderhax instalado e deseja atualizar para boot9strap, siga [Atualizando para B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Esta página irá ajudá-lo a encontrar por onde começar de acordo com o seu dispositivo.
-As cores dos dispositivos nas imagens podem variar, verifique o posicionamento dos botões e as características de cada dispositivo com cuidado para ter certeza de que você selecione o modelo correto.
-{: .notice}
-
-Clique na imagem do seu dispositivo para ir até a página apropriada.
-{: .notice--primary}
-
-Diferentes modelos de dispositivos, versões e regiões exigirão diferentes etapas para atingir o objetivo final do Custom Firmware boot9strap. Esta página irá ajudá-lo a encontrar por onde começar de acordo com o seu dispositivo.
-{: .notice--info}
+Clique na imagem do seu dispositivo para ir até a página apropriada. As cores dos dispositivos nas imagens podem variar, verifique o posicionamento dos botões e as características de cada dispositivo com cuidado para ter certeza de que você selecione o modelo correto.
Se você já hackeou seu 3DS antes e tem uma instalação de CFW que faz uso de uma EmuNAND, basta seguir todas as instruções na SysNAND. Seus dados serão transferidos da EmuNAND para sua nova instalação B9S no final.
-{: .notice--info}
-Observe que as capturas de tela neste guia podem ser ampliadas para mostrar mais contexto, clicando sobre elas.
-{: .notice--info}
+Esta página é para instruções de como instalar boot9strap em um 3DS ou 2DS *sem modificações*. Se você já tem o arm9loaderhax instalado e deseja atualizar para boot9strap, siga [Atualizando para B9S](a9lh-to-b9s).
+{: .notice--primary}
Antes de começar, usuários de Windows devem habilitar a opção para exibir extensões de arquivos usando [Extensões de Arquivos (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Antes de começar, usuários de Windows devem habilitar a opção para exibir ex
Antes de iniciar, você pode querer verificar se o seu cartão SD possui erros utilizando [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), ou [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note que os novos métodos [ntrboothax](installing-boot9strap-(ntrboothax)) e [hardmod](installing-boot9strap-(hardmod)) funcionam em *todos os dispositivos, regiões e versões*! Isso inclui as regiões CHN e TWN que previamente não eram possiveis de hackear!
-{: .notice--success}
-
{% capture notice-1 %}
Há relatos de uma onda de bans sendo feita a usuários de CFW pela Nintendo. Para se proteger, por favor siga os seguintes passos antes de iniciar este guia:
diff --git a/_pages/pt_BR/godmode9-usage.txt b/_pages/pt_BR/godmode9-usage.txt
index ed55a854de..8b51ed5a70 100644
--- a/_pages/pt_BR/godmode9-usage.txt
+++ b/_pages/pt_BR/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "Utilização do GodMode9"
---
GodMode9 é um gerenciador de arquivos completo para o console Nintendo 3DS, lhe dando acesso ao seu cartão SD, às partições FAT dentro da sua SysNAND e EmuNAND, e a basicamente todo o resto. Dentre outras funcionalidades, você pode copiar, excluir, renomear e criar pastas.
-{: .notice--primary}
Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` na pasta `/luma/payloads/` do seu cartão SD, segure (Start) durante a inicialização para exibir um "menu de chainloader" onde você terá que utilizar os botões direcionais e o botão (A) para selecionar "GodMode9" para estas instruções.
-{: .notice--info}
{% capture notice %}
Esta é uma ferramenta poderosa, que lhe fornece meios para fazer basicamente qualquer modificação imaginável em qualquer dado do sistema disponível no console 3DS. Entretanto, precauções são tomadas para que você não danifique acidentalmente os dados do seu console.
-
+
O sistema de permissões de escrita lhe protege fornecendo avisos e lhe obrigando a inserir um sequencial de desbloqueio para habilitar permissões de escrita. Não é possível substituir ou modificar qualquer coisa importante sem tais sequências de desbloqueio, e não é possível desbloquear algo acidentalmente. Como sempre, seja esperto. Mantenha seus backups, apenas por segurança.
{% endcapture %}
diff --git a/_pages/pt_BR/h2testw-(windows).txt b/_pages/pt_BR/h2testw-(windows).txt
index 41eea41737..01f55ba0a7 100644
--- a/_pages/pt_BR/h2testw-(windows).txt
+++ b/_pages/pt_BR/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
Esta é uma seção adicional para verificar erros no seu cartão SD usando h2testw.
-{: .notice--info}
Dependendo do tamanho do seu cartão SD e da velocidade do seu computador, este processo pode demorar até várias horas!
-{: .notice--info}
Esta página é destinada apenas a usuários do Windows. Se você não estiver no Windows, confira as páginas [F3 (linux)](f3-(linux)) ou [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### O que você precisa
diff --git a/_pages/pt_BR/home.txt b/_pages/pt_BR/home.txt
index 1729781a23..755b6e7231 100644
--- a/_pages/pt_BR/home.txt
+++ b/_pages/pt_BR/home.txt
@@ -37,7 +37,7 @@ Na maioria dos casos, executar homebrew no seu dispositivo é 100% gratuito, usa
**Custom Firmware** ("CFW") permite você usar hacks mais avançados que o homebrew do modo userland não consegue tão facilmente. Por exemplo, os patches de assinaturas permitem você instalar títulos não assinados que aparecem logo no seu Menu HOME.
-CFW pode ser facilmente instalado em qualquer console na versão 11.5.0 ou inferior.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## O que este guia instala?
diff --git a/_pages/pt_BR/homebrew-launcher-(alternatives).txt b/_pages/pt_BR/homebrew-launcher-(alternatives).txt
index 4ef211678d..0ae79c8d2e 100644
--- a/_pages/pt_BR/homebrew-launcher-(alternatives).txt
+++ b/_pages/pt_BR/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternativas)"
---
O Homebrew Launcher possui vários pontos de entrada diferentes ou, métodos de iniciá-lo.
-{: .notice--info}
Caso o browserhax não seja uma opção (verifique a tabela abaixo), você ainda não tenha nenhum desses jogos, e não possua outro 3DS com acesso ao Homebrew Launcher, a opção mais barata é comprar uma cópia "Nintendo Selects" do [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (assegure-se de comprar o cartucho correto para a sua região) e um [Powersaves](https://amzn.to/2fb3VY7) (compatível com todas as regiões), depois usar o oot3dhax da tabela abaixo.
-{: .notice--info}
Certifique-se de que a Comunicação sem fio do seu dispositivo está ligada pois o udsploit (utilizado na próxima página) irá precisar do módulo wireless ativo para funcionar, e alguns dispositivos (New 3DS, New 2DS e Old 2DS) não podem ajustar as configurações de Comunicação sem fio a partir do Homebrew Launcher. A Comunicação sem fio precisa apenas estar ligada; conectá-la a um ponto de acesso não é necessário.
-{: .notice--info}
#### O que você precisa
diff --git a/_pages/pt_BR/homebrew-launcher-(soundhax).txt b/_pages/pt_BR/homebrew-launcher-(soundhax).txt
index 8695833732..a1cce68a69 100644
--- a/_pages/pt_BR/homebrew-launcher-(soundhax).txt
+++ b/_pages/pt_BR/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
O Homebrew Launcher possui vários pontos de entrada diferentes, ou métodos de execução.
-{: .notice--info}
Soundhax é compatível com as versões de 9.0.0 a 11.3.0 nas regiões EUA, EUR, JPN, KOR.
-{: .notice--info}
Certifique-se de que a Comunicação sem fio do seu dispositivo está ligada pois o udsploit (utilizado na próxima página) irá precisar do módulo wireless ativo para funcionar, e alguns dispositivos (New 3DS, New 2DS e Old 2DS) não podem ajustar as configurações de Comunicação sem fio a partir do Homebrew Launcher. A Comunicação sem fio precisa apenas estar ligada; conectá-la a um ponto de acesso não é necessário.
-{: .notice--info}
{% capture notice-1 %}
Note que atualizações por Cartucho só fornecerão atualizações para recursos principais do sistema, tais como Configuração do console, Menu HOME, etc. Atualizações por Cartucho não fornecerão atualizações para o Som Nintendo 3DS e recursos de rede, tais como Transferência de dados, Navegador de Internet, StreetPass, Mii Plaza ou eShop.
-
+
Isto significa que usar um Update por Cartucho de uma versão contendo uma versão mais antiga do Som Nintendo 3DS *(7.0.0 para Old 3DSs na região EUR, JPN, KOR e EUA)* para uma que introduziu uma nova versão do Som Nintendo 3DS irá estragar o funcionamento do [Soundhax](homebrew-launcher-(soundhax))! Você vai precisar de um [método alternativo](homebrew-launcher-(alternatives)) para iniciar o Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/pt_BR/installing-boot9strap-(browser).txt b/_pages/pt_BR/installing-boot9strap-(browser).txt
index 8407b6b4de..f7d9c506ef 100644
--- a/_pages/pt_BR/installing-boot9strap-(browser).txt
+++ b/_pages/pt_BR/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Instalando boot9strap (Navegador)"
---
Se você já fez um hack no seu dispositivo antes e tem um CFW baseado em EmuNAND, esse guia lida exclusivamente com a SysNAND, e você deve seguir todas as instruções a partir da ou aplicando para a SysNAND. Note que os termos EmuNAND e RedNAND se referem a implementações ligeiramente diferentes do [mesmo conceito](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### O que você precisa
diff --git a/_pages/pt_BR/installing-boot9strap-(dsiware).txt b/_pages/pt_BR/installing-boot9strap-(dsiware).txt
index 8d2649432e..833bae0582 100644
--- a/_pages/pt_BR/installing-boot9strap-(dsiware).txt
+++ b/_pages/pt_BR/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Instalando boot9strap (DSiWare)"
---
Há dois métodos diferentes de instalação do boot9strap usando DSiWare na versão 11.5.0.
-{: .notice--info}
Um desses métodos só funciona com quatro jogos específicos que já não são mais vendidos no eShop, enquanto o outro funciona com diversos jogos ainda vendidos no eShop.
-{: .notice--info}
Ambos os métodos requerem dois dispositivos. Um 3DS (ou 2DS) deve estar executando algum tipo de custom firmware (como boot9strap ou arm9loaderhax) e é referido como *3DS de origem *, enquanto o outro 3DS (ou 2DS) que está na versão sem modificações 11.5.0 é referido como o *3DS de destino*.
-{: .notice--info}
-
-Ambos os sistemas DEVEM ser da mesma região.
-{: .notice--warning}
Ambos estes métodos irão assumir que o 3DS com custom firmware está usando boot9strap ou arm9loaderhax e concluiu este guia. Enquanto é possível fazer esses métodos com algum outro tipo de custom firmware, isto está fora do escopo deste guia.
-{: .notice--info}
Os dois métodos usam uma combinação do exploit "FIRM partitions known-plaintext" detalhado [aqui](https://www.3dbrew.org/wiki/3DS_System_Flaws), e uma falha que permite que títulos DSIWare leiam e escrevam em qualquer lugar na NAND criptografada.
-{: .notice--info}
-{% capture notice-4 %}
Esses dois métodos exigem que você faça uma [Transferência de dados](http://pt-americas-support.nintendo.com/app/answers/detail/a_id/15647/p/430) de um 3DS com CFW para um 3DS não modificado como parte das etapas. Transferências de dados irão funcionar *apenas* nos seguintes sentidos:
+ New 3DS ou New 2DS -> New 3DS ou New 2DS
+ Old 3DS ou Old 2DS -> Old 3DS ou Old 2DS
- + Old 3DS ou Old 2DS -> New 3DS ou New 2DS
-{% endcapture %}
+ + Old 3DS ou Old 2DS -> New 3DS ou New 2DS
-{{ notice-4 | markdownify }}
+Ambos os sistemas DEVEM ser da mesma região.
+{: .notice--warning}
-Em ambos os métodos, a NNID do 3DS de origem irá ficar preso no 3DS de destino a menos que você transfira de volta ou ligue para a Nintendo! (os detalhes podem ser encontrados nas instruções)
-{: .notice--danger}
-
-Transferências de dados só podem ser realizadas uma vez por semana por NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Transferências de dados só podem ser realizadas uma vez por semana por NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Instalando boot9strap (Injeção de save DSiWare)](installing-boot9strap-(dsiware-game-injection))
-
+
Este método requer que o 3DS de origem seja dono legítimo de um dos seguintes jogos:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ Uma cópia pirata do jogo *não* vai funcionar, e todos esses jogos foram retira
{% capture notice-1 %}
[Instalando boot9strap (Injeção de jogo DSiWare)](installing-boot9strap-(dsiware-game-injection))
-
+
Este método requer que o 3DS de origem compre ou já seja dono legítimo de um dos jogos listados na página [Instalando boot9strap (Lista de jogos compatíveis com injeções DSIWare)](installing-boot9strap-(dsiware-game-injection-list)).
-
+
Uma cópia pirata do jogo *não* funcionará.
{% endcapture %}
diff --git a/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection).txt b/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection).txt
index 7b79e9d1a9..6c6469ba64 100644
--- a/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Instalando boot9strap (Injeção de jogo DSiWare)"
---
Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` na pasta `/luma/payloads/` do seu cartão SD, segure (Start) durante a inicialização para exibir um "menu de chainloader" onde você terá que utilizar os botões direcionais e o botão (A) para selecionar "GodMode9" para estas instruções.
-{: .notice--info}
Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nesta página, você precisará de um cliente de torrent como o [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Antes de prosseguir, certifique-se de ter lido todos os avisos e advertências em [Instalando boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+Se você não usar o `.firm` correto correspondente ao 3DS de destino, você causará um BRICK! Certifique-se de baixar e usar o correto!
{: .notice--danger}
#### O que você precisa
-* Dois consoles 3DS
- + **O 3DS de origem**: o 3DS executando algum tipo de custom firmware (como boot9strap ou arm9loaderhax) *na versão mais recente*
- + ** 3DS de destino**: o 3DS com firmware não modificado que esteja na versão *11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Comprar (ou já possuir) um jogo de DSiWare compatível do eShop no **3DS de origem**
+ Uma cópia pirata do jogo **não** irá funcionar
+ Para uma lista de jogos compatíveis, consulte a página [Instalando boot9strap (Lista de jogos compatíveis com injeções DSiWare)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection-list).txt
index 995771a2e1..d792261ad6 100644
--- a/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Instalando boot9strap (Lista de jogos compatíveis com injeções DSIWar
---
Esta é uma lista gerada automaticamente de todos os jogos compatíveis com [Instalando boot9strap (DSiWare)](installing-boot9strap-(dsiware)).
-{: .notice--primary}
-A lista é dividida por região na ordem EUA, EUR, JPN.
-{: .notice--info}
-
-Cada seção é classificada por ordem crescente de preço.
-{: .notice--info}
+A lista é dividida por região na ordem EUA, EUR, JPN. Cada seção é classificada por ordem crescente de preço.
Códigos QR podem ser lidos apertando (L + R) no menu HOME, depois tocando no ícone QR na tela inferior.
-{: .notice--info}
-Os requisitos de tamanho existem porque o DSIWare injetado e o seu save hackeado não devem modificar seus respectivos tamanhos de arquivo para que a transferência de dados ocorra com sucesso, o que significa que o DSiWare do doador deve ser grande o bastante para caber o DSiWare hackeado.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/pt_BR/installing-boot9strap-(dsiware-save-injection).txt b/_pages/pt_BR/installing-boot9strap-(dsiware-save-injection).txt
index 435bbf6040..cf9754f258 100644
--- a/_pages/pt_BR/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/pt_BR/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Instalando boot9strap (Injeção de save DSiWare)"
---
Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` na pasta `/luma/payloads/` do seu cartão SD, segure (Start) durante a inicialização para exibir um "menu de chainloader" onde você terá que utilizar os botões direcionais e o botão (A) para selecionar "GodMode9" para estas instruções.
-{: .notice--info}
Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nesta página, você precisará de um cliente de torrent como o [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Antes de prosseguir, certifique-se de ter lido todos os avisos e advertências em [Instalando boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
Se você não usar o `.firm` correto correspondente ao 3DS de destino, você causará um BRICK! Certifique-se de baixar e usar o correto!
{: .notice--danger}
#### O que você precisa
-* Dois consoles 3DS
- + **O 3DS de origem**: o 3DS executando algum tipo de custom firmware (como boot9strap ou arm9loaderhax) *na versão mais recente*
- + ** 3DS de destino**: o 3DS com firmware não modificado que esteja na versão *11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Já possuir um dos seguintes jogos de DSiWare exploitáveis (uma cópia pirateada do jogo **não** vai funcionar) no **3DS de origem**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/pt_BR/installing-boot9strap-(hardmod).txt b/_pages/pt_BR/installing-boot9strap-(hardmod).txt
index 7b27379b86..cf9c33740f 100644
--- a/_pages/pt_BR/installing-boot9strap-(hardmod).txt
+++ b/_pages/pt_BR/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Instalando boot9strap (Hardmod)"
---
Um excelente guia para realizar um hardmod pode ser encontrado [aqui](https://gbatemp.net/threads/414498/). Se você estiver em um New 3DS, leia [isto](https://github.com/Plailect/Guide/issues/681) e [isto](https://github.com/Plailect/Guide/issues/1185) antes de realizar o hardmod.
-{: .notice--info}
Esta é uma implementação funcional do exploit "FIRM partitions known-plaintext" detalhado [aqui](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nesta página, você precisará de um cliente de torrent como o [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Isto funcionará no New 3DS, New 2DS, Old 3DS e Old 2DS em *todas* as versões em que você tenha um `.firm` correspondente.
-{: .notice--success}
#### O que você precisa
diff --git a/_pages/pt_BR/installing-boot9strap-(homebrew-launcher).txt b/_pages/pt_BR/installing-boot9strap-(homebrew-launcher).txt
index 6b02e0f7cb..5405398957 100644
--- a/_pages/pt_BR/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/pt_BR/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Instalando boot9strap (Homebrew Launcher)"
---
Se você já fez um hack no seu dispositivo antes e tem um CFW baseado em EmuNAND, esse guia lida exclusivamente com a SysNAND, e você deve seguir todas as instruções a partir da ou aplicando para a SysNAND. Note que os termos EmuNAND e RedNAND se referem a implementações ligeiramente diferentes do [mesmo conceito](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instruções
@@ -20,6 +19,8 @@ Se você já fez um hack no seu dispositivo antes e tem um CFW baseado em EmuNAN
+ Se você *ainda* receber um erro "PM INIT FAILED", tente usar a [versão r19 do safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente
1. Se o exploit tiver sucesso, você terá entrado no SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Seção II - Instalando o boot9strap
diff --git a/_pages/pt_BR/installing-boot9strap-(mset).txt b/_pages/pt_BR/installing-boot9strap-(mset).txt
index 60daa7335f..f3e7b3502f 100644
--- a/_pages/pt_BR/installing-boot9strap-(mset).txt
+++ b/_pages/pt_BR/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Instalando boot9strap (MSET)"
---
Se você já fez um hack no seu dispositivo antes e tem um CFW baseado em EmuNAND, esse guia lida exclusivamente com a SysNAND, e você deve seguir todas as instruções a partir da ou aplicando para a SysNAND. Note que os termos EmuNAND e RedNAND se referem a implementações ligeiramente diferentes do [mesmo conceito](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### O que você precisa
diff --git a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..94bc936dbd
--- /dev/null
+++ b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### O que você precisa
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+*A versão mais recente do [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* A versão mais recente do [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap padrão; não o arquivo `devkit`, nem o arquivo `ntr`)*
+* A versão mais recente do [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(o arquivo `.7z`)*
+* O [Kit de Iniciante de Homebrew](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instruções
+
+##### Seção I - Trabalho Preparatório
+
+1. Desligue seu dispositivo
+1. Insira o cartão SD no seu computador
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copie _o conteúdo do_ `starter.zip` para a raiz do seu cartão SD
+1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD
+1. Copie os arquivos `boot9strap.firm` e `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD
+
+ 
+ {: .notice--info}
+
+1. Reinsira seu cartão SD no seu dispositivo
+1. Ligue o seu dispositivo
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Desligue seu dispositivo
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. Se o exploit tiver sucesso, você terá entrado no SafeB9SInstaller
+
+##### Seção III - Instalando o boot9strap
+
+1. Espere todos as verificações de segurança finalizarem
+1. Quando solicitado, aperte a sequência de botões solicitada para instalar o boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Seção IV - Configurando o Luma3DS
+
+1. Insira o cartão SD no seu computador
+1. Delete `boot.firm` from the root of your SD card
+1. Copie o `boot.firm` do `.7z` do Luma3DS para a raíz do seu cartão SD
+1. Reinsira seu cartão SD no seu dispositivo
+1. Ligue o seu dispositivo
+1. Seu dispositivo deve ter iniciado no menu de configuração do Luma3DS
+ + Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
+1. Use o botão (A) e os botões direcionais para ativar o seguinte:
+ + **"Show NAND or user string in System Settings"**
+1. Aperte (Start) para salvar e reiniciar
+ + Se você receber um erro, apenas continue a próxima página
+
+___
+
+Continue para [Finalizando a instalação](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Aguarde até que o processo seja concluído
+1. Aperte (B) para retornar para o menu principal
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/pt_BR/move-emunand.txt b/_pages/pt_BR/move-emunand.txt
index 3f77d9e650..b7565d71f0 100644
--- a/_pages/pt_BR/move-emunand.txt
+++ b/_pages/pt_BR/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Mover EmuNAND"
---
Esta é uma seção adicional, na qual moveremos o conteúdo de uma EmuNAND anterior para o seu novo CFW na SysNAND. Depois, removeremos a antiga partição da EmuNAND. Note que os termos EmuNAND e RedNAND se referem a implementações ligeiramente diferentes do [mesmo conceito](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` na pasta `/luma/payloads/` do seu cartão SD, segure (Start) durante a inicialização para exibir um "menu de chainloader" onde você terá que utilizar os botões direcionais e o botão (A) para selecionar "GodMode9" para estas instruções.
-{: .notice--info}
+Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` na pasta `/luma/payloads/` do seu cartão SD, segure (Start) durante a inicialização para exibir um "menu de chainloader" onde você terá que utilizar os botões direcionais e o botão (A) para selecionar "GodMode9" para estas instruções.
**Você já DEVE ter instalado Luma3DS e boot9strap ou arm9loaderhax para usar isto.**
{: .notice--danger}
diff --git a/_pages/pt_BR/ntr-and-cubic-ninja.txt b/_pages/pt_BR/ntr-and-cubic-ninja.txt
index 397f14b633..d25500f8f5 100644
--- a/_pages/pt_BR/ntr-and-cubic-ninja.txt
+++ b/_pages/pt_BR/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR e Cubic Ninja"
---
Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nesta página, você precisará de um cliente de torrent como o [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**Cubic Ninja NTR funcionará SOMENTE em um New 3DS japonês!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### O que você precisa
diff --git a/_pages/pt_BR/ntrboot.txt b/_pages/pt_BR/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/pt_BR/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/pt_BR/region-changing.txt b/_pages/pt_BR/region-changing.txt
index 0b7dc8f986..61c0cb187f 100644
--- a/_pages/pt_BR/region-changing.txt
+++ b/_pages/pt_BR/region-changing.txt
@@ -3,16 +3,12 @@ title: "Mudança de Região"
---
Esta é a seção de adicional para a mudar a região da sua SysNAND CFW. Isto é feito através da instalação da imagem CTRTransfer 9.2.0 da região para qual você deseja trocar.
-{: .notice--primary}
-**Mudar de região é quase completamente desnecessário já que o Luma3DS suporta jogos de outras regiões e [emulação de região de um título em específico](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) (em inglês).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nesta página, você precisará de um cliente de torrent como o [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` na pasta `/luma/payloads/` do seu cartão SD, segure (Start) durante a inicialização para exibir um "menu de chainloader" onde você terá que utilizar os botões direcionais e o botão (A) para selecionar "GodMode9" para estas instruções.
-{: .notice--info}
Esse processo irá desvicular sua NNID do sistema, dado que ela não será mais compatível com o mesmo. As NNIDs são travadas à região do seu dispositivo que às criou e não podem ser transferidas entre regiões sem [um procedimento muito complexo e avançado](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Esse processo irá desvicular sua NNID do sistema, dado que ela não será mais
Após este processo, apenas os **New 3DSs que nunca acessaram a eShop antes** e **quaisquer Old 3DSs** serão capazes de acessar a eShop após criarem uma nova NNID em sua nova região. New 3DSs com as regiões mudadas que já acessaram a eShop nas suas regiões originais não podem criar uma nova NNID e acessar a eShop nas suas novas regiões!
{: .notice--warning}
-Note que ocasionalmente a eShop inexplicavelmente não vai funcionar para os dispositivos para os quais deveria funcionar. Isto tem a ver com os servidores da Nintendo, e eu realmente não tenho controle sobre isto.
-{: .notice--warning}
-
-Semelhante ao aviso acima, note que ocasionalmente o eShop inexplicavelmente funcionará para dispositivos que não deveriam (tais como alguns New 3DSs). A causa para isto é atualmente desconhecida.
-{: .notice--warning}
+Note que ocasionalmente a eShop inexplicavelmente não vai funcionar para os dispositivos para os quais deveria funcionar. Isto tem a ver com os servidores da Nintendo, e eu realmente não tenho controle sobre isto. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). A causa para isto é atualmente desconhecida.
Mudar de região usando CTRTransfer (que é usado nesse método) parece fazer com que patches de reinicialização parem de funcionar. A causa para isto é desconhecida mas, por hora, usuários do Old 3DS serão impossibilitados de jogar jogos que utilizam o modo de memória estendida (como Monster Hunter, Super Smash Bros e Pokémon Sun / Moon) até formatarem o dispositivo.
-{: .notice--warning}
-Nunca formate um New 2DS enquanto estiver em uma versão <11.4.0 ou você não conseguirá completar a configuração inicial!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**Você já DEVE ter instalado Luma3DS e boot9strap ou arm9loaderhax para usar isto.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### O que você precisa
diff --git a/_pages/pt_BR/site-navigation.txt b/_pages/pt_BR/site-navigation.txt
index 35fefe31cb..b16ba8b293 100644
--- a/_pages/pt_BR/site-navigation.txt
+++ b/_pages/pt_BR/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [Perguntas Frequentes](faq)
+ [Extensões de arquivo (Windows)](file-extensions-(windows))
+ [Finalizando a instalação](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Começar (New 3DS)](get-started-(new-3ds))
+ [Começar (Old 3DS)](get-started-(old-3ds))
+ [Começar](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Instalando boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Instalando boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Instalando boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Instalando boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Mover EmuNAND](move-emunand)
+ [NTR e Cubic Ninja](ntr-and-cubic-ninja)
+ [Mudança de Região](region-changing)
diff --git a/_pages/pt_BR/troubleshooting.txt b/_pages/pt_BR/troubleshooting.txt
index 75cb470716..271ad49ff9 100644
--- a/_pages/pt_BR/troubleshooting.txt
+++ b/_pages/pt_BR/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
Se você não conseguir inicializar o seu dispositivo, por favor procure pela seção relevante a você e siga as instruções. Quando achar uma solução que funcione, você pode voltar e prosseguir com o guia principal.
(Esta seção é bem longa, use o Ctrl+F para achar o seu problema mais rápido.)
-{: .notice--primary}
-**Se você não puder resolver o seu problema sozinho e precisar de ajuda, por favor copie e cole o conteúdo de todos os arquivos .log relevantes num [Gist](https://gist.github.com/), e somente então peça ajuda com uma descrição detalhada do seu problema e do que você já tentou fazer para resolvê-lo.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nesta página, você precisará de um cliente de torrent como o [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## Aplicativos de DSi / DS não funcionam mais depois de terminar o guia
diff --git a/_pages/pt_BR/uninstall-cfw.txt b/_pages/pt_BR/uninstall-cfw.txt
index 6969af91a2..6f2e82267c 100644
--- a/_pages/pt_BR/uninstall-cfw.txt
+++ b/_pages/pt_BR/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Desinstalar o CFW"
---
Isso irá remover completamente o CFW do seu dispositivo, incluindo o Boot9Strap e Luma3DS, com o propósito de restaurar o dispositivo ao padrão.
-{: .notice--danger}
Todos os jogos não assinados (ilegítimos) se tornarão inutilizáveis e podem ser removidos manualmente usando o Gerenciador de Dados na Configuração do Console. Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) para fazer backup de qualquer save desses jogos não assinados (ilegítimos) com que você se importa.
-{: .notice--info}
Isso não afetará seu NNID, qualquer jogo legítimo comprado, ou qualquer save dos jogos comprados.
-{: .notice--info}
Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` na pasta `/luma/payloads/` do seu cartão SD, segure (Start) durante a inicialização para exibir um "menu de chainloader" onde você terá que utilizar os botões direcionais e o botão (A) para selecionar "GodMode9" para estas instruções.
-{: .notice--info}
#### O que você precisa
diff --git a/_pages/pt_BR/updating-b9s.txt b/_pages/pt_BR/updating-b9s.txt
index 3403bec5d9..11cdaf6c07 100644
--- a/_pages/pt_BR/updating-b9s.txt
+++ b/_pages/pt_BR/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Atualizando B9S" #
---
Esta página é para usuários do boot9strap atualizarem a instalação do boot9strap para a versão mais recente.
-{: .notice--info}
Note que a versão mais recente do Luma3DS *não* é compatível com a versão 1.0 do boot9strap. Ela *exige* que você atualize sua instalação do boot9strap para a versão 1.2 seguindo as instruções nesta página.
-{: .notice--warning}
{% capture notice-1 %}
Há relatos de uma onda de bans sendo feita a usuários de CFW pela Nintendo. Para se proteger, por favor siga os seguintes passos antes de iniciar este guia:
diff --git a/_pages/pt_PT/9.2.0-ctrtransfer.txt b/_pages/pt_PT/9.2.0-ctrtransfer.txt
index de1b2957ee..8a423a100d 100644
--- a/_pages/pt_PT/9.2.0-ctrtransfer.txt
+++ b/_pages/pt_PT/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/pt_PT/a9lh-to-b9s.txt b/_pages/pt_PT/a9lh-to-b9s.txt
index 9adcf103c5..0b9c551959 100644
--- a/_pages/pt_PT/a9lh-to-b9s.txt
+++ b/_pages/pt_PT/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/pt_PT/cart-update.txt b/_pages/pt_PT/cart-update.txt
index c6a8849b86..4ad7d62ecf 100644
--- a/_pages/pt_PT/cart-update.txt
+++ b/_pages/pt_PT/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
Todos os cartões de jogo contêm uma cópia da versão de sistema mínima para poder jogar o jogo, permitindo assim a qualquer pessoa que se encontre numa versão inferior usar o cartão de jogo para atualizar o seu sistema (sem precisar de ligação à Internet).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. Isto irá **apenas** atualizar a versão do sistema *(por exemplo, 2.1.0-0 -> 6.0.0-0)*. O último número *(o -0) * **não** será alterado.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. Isto irá **apenas** atualizar a versão do sistema *(por exemplo, 2.1.0-0 -> 6.0.0-0)*. O último número *(o -0) * **não** será alterado.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/pt_PT/credits.txt b/_pages/pt_PT/credits.txt
index 98df79fe54..f7bc2f6258 100644
--- a/_pages/pt_PT/credits.txt
+++ b/_pages/pt_PT/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
Se me tiver esquecido de ti, contacta-me que adiciono o teu nome.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/pt_PT/f3-(linux).txt b/_pages/pt_PT/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/pt_PT/f3-(linux).txt
+++ b/_pages/pt_PT/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/pt_PT/f3x-(mac).txt b/_pages/pt_PT/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/pt_PT/f3x-(mac).txt
+++ b/_pages/pt_PT/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/pt_PT/faq.txt b/_pages/pt_PT/faq.txt
index 5b559feeee..a2f342dfb0 100644
--- a/_pages/pt_PT/faq.txt
+++ b/_pages/pt_PT/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**P:** *Eu estou na última versão, dá para hackear a minha consola?*
**A:** Yes
-
+
**P:** *Como é que eu atualizo o Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**P:** *Aonde deverei ir para obter ajuda?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**P:** *Posso usar um cartão SD de 128 GB (ou maior)?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**P:** *Como mudo para um cartão SD novo no final disto?*
**A:** Just copy all the files to the new SD card.
-
+
**P:** *Posso manter a minha NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/pt_PT/file-extensions-(windows).txt b/_pages/pt_PT/file-extensions-(windows).txt
index 387e905e4f..ea1073e138 100644
--- a/_pages/pt_PT/file-extensions-(windows).txt
+++ b/_pages/pt_PT/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instruções
diff --git a/_pages/pt_PT/finalizing-setup.txt b/_pages/pt_PT/finalizing-setup.txt
index 4e86f17c1d..06d9756561 100644
--- a/_pages/pt_PT/finalizing-setup.txt
+++ b/_pages/pt_PT/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
# # # Visão geral das etapas
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### O que precisas
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/pt_PT/flashing-ntrboot-(custom-firmware).txt b/_pages/pt_PT/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..8148e2f8f3
--- /dev/null
+++ b/_pages/pt_PT/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### O que precisas
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instruções
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/pt_PT/flashing-ntrboot-(powersaves).txt b/_pages/pt_PT/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/pt_PT/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/pt_PT/get-started-(new-3ds).txt b/_pages/pt_PT/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/pt_PT/get-started-(new-3ds).txt
+++ b/_pages/pt_PT/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/pt_PT/get-started-(old-3ds).txt b/_pages/pt_PT/get-started-(old-3ds).txt
index 408104095d..586481246a 100644
--- a/_pages/pt_PT/get-started-(old-3ds).txt
+++ b/_pages/pt_PT/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-As duas últimas colunas da tabela referem-se ao último número da tua versão (que corresponde à versão do navegador instalada no sistema). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-Os campos "desde" e "até" são inclusivos. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/pt_PT/get-started.txt b/_pages/pt_PT/get-started.txt
index 322ae20931..46590e29b7 100644
--- a/_pages/pt_PT/get-started.txt
+++ b/_pages/pt_PT/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-As cores das consolas nesta imagem podem variar. O que tens de prestar atenção, cuidadosamente, é à disposição dos botões e às capacidades de cada consola, para teres a certeza de que escolhes a consola certa.
-{: .notice}
-
-Clica na imagem da tua consola para ir à página apropriada.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Clica na imagem da tua consola para ir à página apropriada. As cores das consolas nesta imagem podem variar. O que tens de prestar atenção, cuidadosamente, é à disposição dos botões e às capacidades de cada consola, para teres a certeza de que escolhes a consola certa.
Se já tiveres hackeado a tua 3DS e tiveres um sistema CFW baseado em EmuNAND, segue todas as instruções na SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Antes de começar, pode ser boa ideia verificar se o teu cartão SD tem erros, com o [H2testw (Windows)](h2testw-(windows)), o [F3 (Linux)](f3-(linux)), ou o [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/pt_PT/godmode9-usage.txt b/_pages/pt_PT/godmode9-usage.txt
index d45bcd2447..c68eaaa017 100644
--- a/_pages/pt_PT/godmode9-usage.txt
+++ b/_pages/pt_PT/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/pt_PT/h2testw-(windows).txt b/_pages/pt_PT/h2testw-(windows).txt
index 8741364a3c..ace34db426 100644
--- a/_pages/pt_PT/h2testw-(windows).txt
+++ b/_pages/pt_PT/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Dependendo do tamanho do teu cartão SD e da velocidade do teu computador, este processo pode levar horas!
-{: .notice--info}
Esta página é só para utilizadores de Windows. Se não estiveres no Windows, vê as páginas para [F3 (linux)](f3-(linux)) ou [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Requisitos
diff --git a/_pages/pt_PT/home.txt b/_pages/pt_PT/home.txt
index 345f1cf04e..c79d3daab7 100644
--- a/_pages/pt_PT/home.txt
+++ b/_pages/pt_PT/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") permite que uses hacks mais avançados do que homebrew que corre em userland. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/pt_PT/homebrew-launcher-(alternatives).txt b/_pages/pt_PT/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/pt_PT/homebrew-launcher-(alternatives).txt
+++ b/_pages/pt_PT/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/pt_PT/homebrew-launcher-(soundhax).txt b/_pages/pt_PT/homebrew-launcher-(soundhax).txt
index df7fbf5966..8e01740987 100644
--- a/_pages/pt_PT/homebrew-launcher-(soundhax).txt
+++ b/_pages/pt_PT/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Há muitas maneiras e pontos de entrada (entrypoints) para acederes ao Homebrew Launcher.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/pt_PT/installing-boot9strap-(browser).txt b/_pages/pt_PT/installing-boot9strap-(browser).txt
index e42638d70d..6b22d3d957 100644
--- a/_pages/pt_PT/installing-boot9strap-(browser).txt
+++ b/_pages/pt_PT/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### O que precisas
diff --git a/_pages/pt_PT/installing-boot9strap-(dsiware).txt b/_pages/pt_PT/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/pt_PT/installing-boot9strap-(dsiware).txt
+++ b/_pages/pt_PT/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/pt_PT/installing-boot9strap-(dsiware-game-injection).txt b/_pages/pt_PT/installing-boot9strap-(dsiware-game-injection).txt
index 3a4f444f74..2c12980da8 100644
--- a/_pages/pt_PT/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/pt_PT/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### O que precisas
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/pt_PT/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/pt_PT/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/pt_PT/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/pt_PT/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/pt_PT/installing-boot9strap-(dsiware-save-injection).txt b/_pages/pt_PT/installing-boot9strap-(dsiware-save-injection).txt
index 1cc7b8b97b..63f1784fc1 100644
--- a/_pages/pt_PT/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/pt_PT/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### O que precisas
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/pt_PT/installing-boot9strap-(hardmod).txt b/_pages/pt_PT/installing-boot9strap-(hardmod).txt
index d25fbefe5a..97ba3cb925 100644
--- a/_pages/pt_PT/installing-boot9strap-(hardmod).txt
+++ b/_pages/pt_PT/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### O que precisas
diff --git a/_pages/pt_PT/installing-boot9strap-(homebrew-launcher).txt b/_pages/pt_PT/installing-boot9strap-(homebrew-launcher).txt
index 1ae732ea95..ab23a0e179 100644
--- a/_pages/pt_PT/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/pt_PT/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instruções
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/pt_PT/installing-boot9strap-(mset).txt b/_pages/pt_PT/installing-boot9strap-(mset).txt
index d01bd92ad5..c17433c7c3 100644
--- a/_pages/pt_PT/installing-boot9strap-(mset).txt
+++ b/_pages/pt_PT/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### O que precisas
diff --git a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..f38452a25f
--- /dev/null
+++ b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### O que precisas
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instruções
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/pt_PT/move-emunand.txt b/_pages/pt_PT/move-emunand.txt
index e3e0d849f2..1d46b772e4 100644
--- a/_pages/pt_PT/move-emunand.txt
+++ b/_pages/pt_PT/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/pt_PT/ntr-and-cubic-ninja.txt b/_pages/pt_PT/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/pt_PT/ntr-and-cubic-ninja.txt
+++ b/_pages/pt_PT/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/pt_PT/ntrboot.txt b/_pages/pt_PT/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/pt_PT/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/pt_PT/region-changing.txt b/_pages/pt_PT/region-changing.txt
index 75bfe1738e..4668525d98 100644
--- a/_pages/pt_PT/region-changing.txt
+++ b/_pages/pt_PT/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Mudar de Região é quase completamente desnecessário, agora que o Luma3DS suporta jogos de outras regiões e [emulação de região para títulos](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) individuais.**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. Isto tem a ver totalmente com os servidores da Nintendo, e eu não tenho nenhum controlo sobre isso.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. Isto tem a ver totalmente com os servidores da Nintendo, e eu não tenho nenhum controlo sobre isso. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Requisitos
diff --git a/_pages/pt_PT/site-navigation.txt b/_pages/pt_PT/site-navigation.txt
index e7e2b436e9..5b38af068f 100644
--- a/_pages/pt_PT/site-navigation.txt
+++ b/_pages/pt_PT/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Começar (New 3DS)](get-started-(new-3ds))
+ [Começar (Old 3DS)](get-started-(old-3ds))
+ [Começar](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR e Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/pt_PT/troubleshooting.txt b/_pages/pt_PT/troubleshooting.txt
index 50ee08c93b..3bba862c5b 100644
--- a/_pages/pt_PT/troubleshooting.txt
+++ b/_pages/pt_PT/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Quando uma solução funcionar para ti, podes continuar com o resto do guia
(Esta secção é bastante grande, tenta usar Ctrl+F para procurar o teu problema.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/pt_PT/uninstall-cfw.txt b/_pages/pt_PT/uninstall-cfw.txt
index ebe48f0a80..7e44dea51b 100644
--- a/_pages/pt_PT/uninstall-cfw.txt
+++ b/_pages/pt_PT/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### O que precisas
diff --git a/_pages/pt_PT/updating-b9s.txt b/_pages/pt_PT/updating-b9s.txt
index 59e8bcd7c3..8bcdd79ee9 100644
--- a/_pages/pt_PT/updating-b9s.txt
+++ b/_pages/pt_PT/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/ro_RO/9.2.0-ctrtransfer.txt b/_pages/ro_RO/9.2.0-ctrtransfer.txt
index c3758bfa8f..f83c39bcfb 100644
--- a/_pages/ro_RO/9.2.0-ctrtransfer.txt
+++ b/_pages/ro_RO/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "CTRTransfer 9.2.0"
---
Aceasta este o secțiune suplimentară pentru a instala imaginea CTRTransfer 9.2.0 în dispozitivul dumneavoastră.
-{: .notice--primary}
Pentru a folosi linkurile [magnetice](https://en.wikipedia.org/wiki/Magnet_URI_scheme) de pe această pagină, veți avea nevoie de un client de torrente ca [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
-{: .notice--info}
Niciodată să nu formatați un New 2DS pe o versiune <11.4.0, sau vă va fi imposibil să faceți configurarea inițială!
{: .notice--danger}
diff --git a/_pages/ro_RO/a9lh-to-b9s.txt b/_pages/ro_RO/a9lh-to-b9s.txt
index 5005c8bcf7..40ea3507bc 100644
--- a/_pages/ro_RO/a9lh-to-b9s.txt
+++ b/_pages/ro_RO/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH către B9S"
---
Această pagină este pentru utilizatorii de arm9loaderhax care vor să își actualizeze dispozitivele la boot9strap.
-{: .notice--info}
Toate versiunile viitoare de Luma3DS se vor face doar în formatul `.firm`, care va fi compatibil doar cu boot9strap și sighax. Asta înseamnă că pentru a continua să primiți cele mai recente actualizări de Luma3DS, ar trebui să folosiți această pagină ca să vă actualizați instalarea.
-{: .notice--info}
+
+Pentru a folosi linkurile [magnetice](https://en.wikipedia.org/wiki/Magnet_URI_scheme) de pe această pagină, veți avea nevoie de un client de torrente ca [Deluge](http://dev.deluge-torrent.org/wiki/Download)
Dacă aveți un PIN pe Luma3DS, SafeBS9Installer vă va da eroarea "OTP Crypto Fail" cu excepția în cazul în care vă deazctivați temporar codul PIN (puteți reactiva codul PIN după actualizări).
{: .notice--warning}
-Pentru a folosi linkurile [magnetice](https://en.wikipedia.org/wiki/Magnet_URI_scheme) de pe această pagină, veți avea nevoie de un client de torrente ca [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
Au existat rapoarte despre un val de banuri adresate utilizatorilor de CFW de către Nintendo. Pentru a vă proteja, efectuaţi următorii paşi înainte de a începe acest ghid:
diff --git a/_pages/ro_RO/cart-update.txt b/_pages/ro_RO/cart-update.txt
index e5e435d8e4..76a2d54d87 100644
--- a/_pages/ro_RO/cart-update.txt
+++ b/_pages/ro_RO/cart-update.txt
@@ -3,20 +3,18 @@ title: "Actualizare cu card de joc"
---
Toate cardurile cu jocuri conțin o copie cu versiunea necesară de sistem ca să o joci, permițând tuturor cu o versiune mai mică să folosească cardurile pentru a actualiza la acea versiune (chiar și fără conexiune la internet).
-{: .notice--info}
{% capture notice-1 %}
Țineți cont că actualizările cu cardul vor aduce actualizări numai funcțiilor de bază, cum ar fi System Settings, Meniul HOME, etc. Actualizările cu cardul nu vor aduce acutalizări la Nintendo 3DS Sound și serviciilor de rețea, cum ar fi System Transfer, Internet Browser, StreetPass Mii Plaza, sau eShop.
-
+
Asta înseamnă că folosind o actualizare cu cardul de la o versiune care conține o versiune de Nintendo 3DS Sound inferioară *(<7.0.0 pentru Old 3DS din regiunile EUR, JPN, KOR, și USA)* către una care are o versiune Nintendo 3DS Sound superioară va strica [Soundhax](homebrew-launcher-(soundhax))! Veţi avea nevoie de o [metodă alternativă](homebrew-launcher-(alternatives)) pentru a intra în Homebrew Launcher!
+
+Asta înseamnă că o actualizare cu cardul NU va instala un browser dacă nu aveți deja unul. Acesta va actualiza **doar** versiunea de sistem actuală *(de exemplu, 2.1.0-0 -> 6.0.0-0)*. Ultimul număr *(0-ul)* **nu** se va schimba.
{% endcapture %}
{{ notice-1 | markdownify }}
-Asta înseamnă că o actualizare cu cardul NU va instala un browser dacă nu aveți deja unul. Acesta va actualiza **doar** versiunea de sistem actuală *(de exemplu, 2.1.0-0 -> 6.0.0-0)*. Ultimul număr *(0-ul)* **nu** se va schimba.
-{: .notice--warning}
-
**Actuallizând cu un card de joc conținând veriunea 9.9.0 sau superior va elimina browserul până când se va efectua o actualizare standard online!**
{: .notice--danger}
diff --git a/_pages/ro_RO/credits.txt b/_pages/ro_RO/credits.txt
index da6b8566e8..fbd788a562 100644
--- a/_pages/ro_RO/credits.txt
+++ b/_pages/ro_RO/credits.txt
@@ -9,7 +9,6 @@ title: "Contribuții"
{: .notice--primary}
Dacă te-am uitat, contactează-mă și îți voi adaugă numele.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/ro_RO/f3-(linux).txt b/_pages/ro_RO/f3-(linux).txt
index abc169acb9..31c9bc06c5 100644
--- a/_pages/ro_RO/f3-(linux).txt
+++ b/_pages/ro_RO/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
Aceasta este o secțiune suplimentară pentru a verifica cardul SD de erori folosind F3.
-{: .notice--info}
În funcție de mărimea cardului SD și de viteza calculatorului dumneavoastră, acest proces poate dura până la câteva ore!
-{: .notice--info}
Această pagină este doar pentru utilizatorii de Linux. Dacă nu sunteți pe Linux, verificați paginile [H2testw (windows)](h2testw-(windows)) sau [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Ce aveți nevoie
diff --git a/_pages/ro_RO/f3x-(mac).txt b/_pages/ro_RO/f3x-(mac).txt
index 091758edff..12eecf2855 100644
--- a/_pages/ro_RO/f3x-(mac).txt
+++ b/_pages/ro_RO/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
Aceasta este o secțiune suplimentară pentru a verifica cardul SD de erori folosind F3X.
-{: .notice--info}
În funcție de mărimea cardului SD și de viteza calculatorului dumneavoastră, acest proces poate dura până la câteva ore!
-{: .notice--info}
Această pagină este doar pentru utilizatorii de Mac. Dacă nu sunteți pe un Mac, verificați paginile [H2testw (windows)](h2testw-(windows)) sau [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### Ce aveți nevoie
diff --git a/_pages/ro_RO/faq.txt b/_pages/ro_RO/faq.txt
index ceb7a10c04..2cedf93ffe 100644
--- a/_pages/ro_RO/faq.txt
+++ b/_pages/ro_RO/faq.txt
@@ -6,52 +6,52 @@ title: "Întrebări frecvente"
**Î:** *Am dispozitivul actualizat la zi, este dispozitivul modabil?*
**R:** Da
-
+
**Î:** *Cum actualizez Luma3DS?*
**R:** Folosiți Luma3DS Updater
-
+
**Î:** *Am auzit că trebuie să plătesc pentru (Gateway, Sky3DS, etc)., am nevoie de așa ceva?*
**R:** Nu. boot9strap este o metodă superioară pentru a încărca hax care ruează devreme în timpul pornirii.
-
+
**Î:** *Cum mut datele de salvare de pe o configurare Gateway în jocuri instalate pe sistem?*
**R:** Vedeți [aici](https://gbatemp.net/threads/425743/)
-
+
**Î:** *Ce am nevoie pentru a folosi acest ghid?*
** R:** Acest ghid poate fi complet realizat cu software gratuit
-
+
**Î:** *Cât de riscant este să îmi fac modare la consolă?*
**R:** Brickuirea consolei este practic imposibilă atâta timp cât nu ignorați toate verificările de siguranță.
-
+
**Î:** *Pot rula homebrew și emulatoare cu asta?*
**R:** Da! Custom Firmware-ul nu numai că vă oferă acces la Homebrew Launcher, dar de asemenea vă oferă hackuri pe toate versiunile, ceea ce înseamnă că le veți păstra permanent, chiar și dacă apăr update-uri.
-
+
**Î:** *Pot folosi asta ca să joc jocuri din alte regiuni?*
**R:** Luma3DS suportă patch-urile Region Free, care permit utilizatorilor să instaleze jocuri din orice regiune fără alte modificări în plus.
-
+
**Î:** *Este în regulă să actualizez la CFW SysNAND?*
**R:** Da. Este în regulă, nu mai întrebați asta.
-
+
**Î:** *Unde ar trebui să mă duc pentru asistenţă? *
**R:** Pentru suport, cereți ajutor la [Nintendo Homebrew pe Discord](https://discord.gg/MWxPgEp).
-
+
**Î:** *Pot face asta cu un card SD de 4GB (sau mai mic)?*
**R:** Da!
-
+
**Î:** *Pot să folosesc un card SD de 128GB (sau mai mare)?*
**R:** Da, dar unii utilizatori au raportat încetiniri când au folosit carduri atât de mari. Țineți minte că nu puteți formata cardul exFAT; trebuie formatat cu FAT32.
-
+
**Î:** *Cum pot face transferul la un nou card SD la final?*
**R:** Copiați toate fișierele pe noul card SD.
-
+
**Î:** *Îmi pot păstra NNID-ul?*
**R:** Dacă începeți cu un NNID și urmați fiecare pas, o să vă păstrați NNID-ul la final.
-
+
**Î:** *Dar Transferurile de Sistem?*
**R:** Odată ce ați completat ghidul, puteți face transferul de sistem de la și către un 3DS sau 2DS cu B9S la fel cum ați face cu o consolă stoc sau EmuNAND (veți pierde orice joc nelegitim/teme/DLC în transfer; salvările vor sta chiar și pentru jocurile pierdute).
-
+
**Î:** *Pot face asta fără un calculator (ex. un telefon cu Android)?*
**R:** Aveți nevoie doar de posibilitatea de a pune fișiere pe cardul SD!
-
+
**Î:** *Ajutor! Ceva rău s-a întâmplat și dispozitivul nu se mai aprinde...*
**R:** Vă rog, aruncați o privire la [ghidul de depanare](troubleshooting).
diff --git a/_pages/ro_RO/file-extensions-(windows).txt b/_pages/ro_RO/file-extensions-(windows).txt
index 199ed49bb4..b6a6617779 100644
--- a/_pages/ro_RO/file-extensions-(windows).txt
+++ b/_pages/ro_RO/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "Extensii de fișier (Windows)"
---
Aceasta este o secțiune suplimentară pentru a dezactiva comportamentul de bază a lui Windows de a ascunde extensiile de fișier.
-{: .notice--info}
Acest lucru vă va ușura în a găsi fișierele menționate în restul acestui ghid.
-{: .notice--info}
#### Instrucțiuni
diff --git a/_pages/ro_RO/finalizing-setup.txt b/_pages/ro_RO/finalizing-setup.txt
index b9e5cc6cb3..eafe765a22 100644
--- a/_pages/ro_RO/finalizing-setup.txt
+++ b/_pages/ro_RO/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizând instalarea"
#### Descrierea generală a pașilor
-{% capture notice-2 %}
Fișierul `boot.firm` este ceea ce e rulat de boot9strap însuși după ce se încarcă de pe NAND și poate fi orice alt payload arm9 valid în formatul FIRM. Acest fișier poate fi înlocuit oricând, totuși Luma3DS va permite lansarea altor payload-uri arm9 în formatul FIRM folosind chainloader-ul de la Luma3DS.
-
+
În acest caz, putem să folosim Luma3DS de [AuroraWright](https://github.com/AuroraWright/) pentru a porni un SysNAND patch-uit direct, făcând inutilă nevoia de a folosi orice fel de EmuNAND, simplificând semnificativ folosirea unui 3DS modat economisind de asemenea spațiu pe cardul SD.
-
+
Pe parcursul acestui proces, vom instala și programe ca următoarele:
+ **FBI** *(instalează jocuri și aplicații în format CIA)*
@@ -18,10 +17,6 @@ Pe parcursul acestui proces, vom instala și programe ca următoarele:
+ **GodMode9** *(unealtă multifuncțională care poate face funcții de NAND și card)*
+ **Homebrew Launcher Loader** *(pornește Homebrew Launcher ca o aplicație obișnuită mulțumită magiei lui Rosalina)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Ce aveți nevoie
* Ultima versiune de [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(fișierul `.cia`)*
@@ -134,8 +129,10 @@ Dacă, înainte să urmăriți acest ghid, aveați deja o configurare cu EmuNAND
___
{% capture notice-10 %}
-Acum puteți folosi Luma3DS Updater pentru a actualiza Luma3DS la cea mai nouă versiune doar prin a o deschide și apăsa (A).
+Acum puteți folosi Luma3DS Updater pentru a actualiza Luma3DS la cea mai nouă versiune doar prin a o deschide și apăsa (A).
+
Nu este același lucru ca o actualizare de sistem; el doar descarcă și extrage cele mai noi fișiere de Luma3DS.
+
Acesta va actualiza doar fișierele Luma3DS de pe cardul SD. Dacă porniți dispozitivul fără un card SD, va utiliza orice versiune este plasată în CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ Acesta va actualiza doar fișierele Luma3DS de pe cardul SD. Dacă porniți disp
{% capture notice-6 %}
Acum veți porni CFW SysNAND Luma3DS în mod implicit.
+
Acum puteți ține apăsat (Select) la pornire pentru a intra în meniul de setări Luma3DS.
+
Puteți ține apăsat (Start) la pornire pentru a lansa meniul chainloader Luma3DS (țineți cont că meniul chainloader Luma3DS se va afișa doar dacă mai mult de un payload este detectat).
+
Acum puteți ține apăsat (Start) + (Select) + (X) în timpul pornirii pentru a face copie la bootrom-ul ARM11 (`boot11.bin`), bootrom-ul ARM9 (`boot9.bin`), și OTP-ul unic pentru consolă (`OTP.bin`) în folderul `/boot9strap/` de pe cardul SD (țineți cont că asta nu va crea niciun tip de mesaj).
+
Acum puteți apăsa (L) + (Jos) + (Select) în timp ce sistemul pornește pentru a deschide meniul Rosalina integrat în Luma3DS. Pentru o lista completă de caracteristici din Rosalina, vă rog să vedeți [Publicarea despre Luma3DS 8.0](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ Pentru a folosi [NTR CFW](https://github.com/44670/BootNTR/), instalați [BootNT
{% capture notice-7 %}
Puteți șterge orice fișiere și foldere suplimentare din rădăcina cardului SD care *nu* sunt în următoarea imagine. Dacă îl aveti, lăsați folderul `DCIM` pentru că acesta conține toate pozele făcute cu camera de pe 3DS:
-
+
{% endcapture %}
diff --git a/_pages/ro_RO/flashing-ntrboot-(custom-firmware).txt b/_pages/ro_RO/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..5034b94eb4
--- /dev/null
+++ b/_pages/ro_RO/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Ce aveți nevoie
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instrucțiuni
+
+##### Secțiunea I - Preparații
+
+1. Închideți **3DS-ul sursă**
+1. Introduceți cardul SD **al 3DS-ului sursă** în calculator
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Așteptați până când procesul este terminat
+1. Apăsați (B) ca să vă întoarceți în meniul principal
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Așteptați până când procesul este terminat
+1. Apăsați (B) ca să vă întoarceți în meniul principal
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ro_RO/flashing-ntrboot-(powersaves).txt b/_pages/ro_RO/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/ro_RO/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/ro_RO/get-started-(new-3ds).txt b/_pages/ro_RO/get-started-(new-3ds).txt
index 948b728665..3964dec158 100644
--- a/_pages/ro_RO/get-started-(new-3ds).txt
+++ b/_pages/ro_RO/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Începeți (New 3DS)"
---
-Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos.
-{: .notice--primary}
+Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos. Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. Asta înseamnă că, de exemplu, rândul "de la 9.0.0 până la 9.2.0" cuprinde 9.0.0, 9.1.0, și 9.2.0.
-Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. Asta înseamnă că, de exemplu, rândul "de la 9.0.0 până la 9.2.0" cuprinde 9.0.0, 9.1.0, și 9.2.0.
-{: .notice--info}
-
-Țineți cont că ultimul număr al versiunii sistemului dumneavoastră (care este precedat de o linie) se referă la versiunea browserului. În prezent, versiunea de browser este irelevantă pentru New 3DS în acest ghid.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. În prezent, versiunea de browser este irelevantă pentru New 3DS în acest ghid.
Pentru toate versiunile puteți de asemenea face [actualizare cu cardul](cart-update) spre o versiune superioară din aceeași coloană pentru a urma instrucțiunile.
-{: .notice--info}
Versiunea dispozitvului poate fi găsit în colțul din dreapta jos al ecranului superior din System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Versiunea dispozitvului poate fi găsit în colțul din dreapta jos al ecranului
TOATE VERSIUNILE
|
- Instalând boot9strap (ntrboothax)
(Necesită un flashcart compatibil) sau Instalând boot9strap (Hardmod)
(Necesită sudură) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/ro_RO/get-started-(old-3ds).txt b/_pages/ro_RO/get-started-(old-3ds).txt
index 69caf2fbe4..1536702a6d 100644
--- a/_pages/ro_RO/get-started-(old-3ds).txt
+++ b/_pages/ro_RO/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Începeți (Old 3DS)"
---
-Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos.
-{: .notice--primary}
+Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos. Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. Asta înseamnă că, de exemplu, rândul "de la 9.0.0 până la 9.2.0" cuprinde 9.0.0, 9.1.0, și 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Dacă versiunea este -0 atunci nu aveți un browser, în timp ce orice alt număr mai mare decât -0 arată că aveți browser instalat.
-{% capture notice-1 %}
-Ultimele două coloane ale tabelului se referă la ultimul număr al versiunii (care corespunde versiunii browserului instalat pe dispozitiv). Dacă versiunea este -0 atunci nu aveți un browser, în timp ce orice alt număr mai mare decât -0 arată că aveți browser instalat.
-
-Câmpurile "de la" și "până la" sunt inclusiv. Asta înseamnă că, de exemplu, rândul "de la 9.0.0 până la 9.2.0" cuprinde 9.0.0, 9.1.0, și 9.2.0.
-
În cazul versiunii "5.0.0-0U" de exemplu, urmăriți coloana "Fără Browser" și rândul 5.0.0 până la 5.1.0 din cauza că sistemul este pe o versiune din acel interval și nu are browserul instalat.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
Pentru toate versiunile puteți de asemenea face [actualizare cu cardul](cart-update) spre o versiune superioară din aceeași coloană pentru a urma instrucțiunile.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Țineți cont că actualizările cu cardul vor aduce actualizări numai funcțiilor de bază, cum ar fi System Settings, Meniu HOME, etc. Actualizările cu cardul nu vor aduce acutalizări la Nintendo 3DS Sound și serviciilor de rețea, cum ar fi System Transfer, Internet Browser, StreetPass Mii Plaza, sau eShop.
-
-Asta înseamnă că folosind o actualizare cu cardul de la o versiune care conține o versiune de Nintendo 3DS Sound inferioară *(<7.0.0 pentru Old 3DS din regiunile EUR, JPN, KOR, și USA)* către una care are o versiune Nintendo 3DS Sound superioară va strica [Soundhax](homebrew-launcher-(soundhax))! Veţi avea nevoie de o [metodă alternativă](homebrew-launcher-(alternatives)) pentru a intra în Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Dacă ați făcut actualizare cu un card de joc care conține versiunea 9.9.0 sau superior *(însemnând că aveți versiunea 9.9.0 sau superior, dar browserul este pe -25 sau inferior, cum ar fi 10.2.0-24)*, browserul dumneavoastră a fost îndepărtat și va trebui să urmați coloana "Fără Browser".
-{: .notice--warning}
Versiunea dispozitvului poate fi găsit în colțul din dreapta jos al ecranului superior din System Settings.
-{: .notice--success}
{: .notice--info}
+Dacă ați făcut actualizare cu un card de joc care conține versiunea 9.9.0 sau superior *(însemnând că aveți versiunea 9.9.0 sau superior, dar browserul este pe -25 sau inferior, cum ar fi 10.2.0-24)*, browserul dumneavoastră a fost îndepărtat și va trebui să urmați coloana "Fără Browser".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/ro_RO/get-started.txt b/_pages/ro_RO/get-started.txt
index 9dcb83a4c2..c9d98e094c 100644
--- a/_pages/ro_RO/get-started.txt
+++ b/_pages/ro_RO/get-started.txt
@@ -2,23 +2,14 @@
title: "Începeți"
---
-Această pagină este pentru instrucţiuni despre cum să instalaţi boot9strap pe un 3DS sau 2DS din *stoc*. Dacă aveţi deja arm9loaderhax instalat şi vreți să actualizați către boot9strap, urmaţi [A9LH către B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Această pagină vă va arăta de unde să începeți pentru dispozitivul dumneavoastră.
-Culoarea dispozitivelor din imagine poate varia, dar fiți atent la poziția butoanelor și a caracteristicilor fiecărui dispozitiv ca să aveți grijă că selectați dispozitivul corect.
-{: .notice}
-
-Apăsați pe imaginea dispozitivului dumneavoastră ca să mergeți pe pagina corespunzătoare.
-{: .notice--primary}
-
-Modelele diferite de dispozitive, versiuni și regiuni vor avea nevoie de pași diferiți pentru a ajunge la scopul de a avea Custom Firmware cu boot9strap. Această pagină vă va arăta de unde să începeți pentru dispozitivul dumneavoastră.
-{: .notice--info}
+Apăsați pe imaginea dispozitivului dumneavoastră ca să mergeți pe pagina corespunzătoare. Culoarea dispozitivelor din imagine poate varia, dar fiți atent la poziția butoanelor și a caracteristicilor fiecărui dispozitiv ca să aveți grijă că selectați dispozitivul corect.
Dacă v-ați modat deja 3DS-ul înainte și aveți instalat un CFW bazat pe EmuNAND, urmați toate instrucțiunile în SysNAND. Datele dumneavoastră vor fi transferate de pe EmuNAND pe noua instalare de B9S la sfărșit.
-{: .notice--info}
-Țineți cont cum capturile de ecran de pe acest ghid pot fi mărite ca să arate mai mult conținut făcând click pe ele.
-{: .notice--info}
+Această pagină este pentru instrucţiuni despre cum să instalaţi boot9strap pe un 3DS sau 2DS din *stoc*. Dacă aveţi deja arm9loaderhax instalat şi vreți să actualizați către boot9strap, urmaţi [A9LH către B9S](a9lh-to-b9s).
+{: .notice--primary}
Înainte să începeți, utilizatorii de Windows ar trebui să activeze opțiunea de a arăta extensiile de fișier folosind [Extensii de fișier (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Dacă v-ați modat deja 3DS-ul înainte și aveți instalat un CFW bazat pe EmuN
Înainte să începeți, este de dorit să vă verificați cardul SD pentru erori folosind [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), sau [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Țineți cont că noua metodă [ntrboothax](installing-boot9strap-(ntrboothax)) și [hardmod](installing-boot9strap-(hardmod)) funcţionează pe *toate dispozitivele, regiuni şi versiuni*! Aceasta include dispozitivele din regiunile CHN şi TWN care au fost anterior imposibil de modat!
-{: .notice--success}
-
{% capture notice-1 %}
Au existat rapoarte de un val de banuri adresate utilizatorilor de CFW de către Nintendo. Pentru a vă proteja, efectuaţi următorii paşi înainte de a începe acest ghid:
diff --git a/_pages/ro_RO/godmode9-usage.txt b/_pages/ro_RO/godmode9-usage.txt
index 6bd5d9e112..6f7e467235 100644
--- a/_pages/ro_RO/godmode9-usage.txt
+++ b/_pages/ro_RO/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "Folosind GodMode9"
---
GodMode9 este un fişier de browser cu acces complet pentru dispozitivul Nintendo 3DS, oferindu-vă acces la cardul SD, partiţii FAT din SysNAND, EmuNAND şi practic orice altceva. Printre alte funcţionalităţi, puteţi copia, şterge, redenumi fişiere şi crea foldere.
-{: .notice--primary}
Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul '/luma/payloads/' de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
-{: .notice--info}
{% capture notice %}
Aceasta este o unealtă puternică, ea vă oferă mijloacele de a face practic orice modificare imaginabilă la toate datele de sistem disponibile pe dispozitivul 3DS. Totuși, se cere precauție pentru a nu dăuna din greșeală datele dispozitivului.
-
+
Sistemul de permisiuni de scriere vă protejează prin furnizarea de avertismente şi vă obligă să introduceţi o secvenţă de deblocare pentru a permite permisiuni de scriere. Nu este posibil să suprascrieți sau să modificați orice lucru important fără aceste secvenţe de deblocare și nu este posibil a debloca accidental ceva. Ca întotdeauna, fiți inteligent, păstrați copii de rezervă, doar pentru a fi în siguranţă.
{% endcapture %}
diff --git a/_pages/ro_RO/h2testw-(windows).txt b/_pages/ro_RO/h2testw-(windows).txt
index baa0cf31c0..b34d0a20a6 100644
--- a/_pages/ro_RO/h2testw-(windows).txt
+++ b/_pages/ro_RO/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
Aceasta este o secțiune suplimentară pentru a verifica cardul SD de erori folosind h2testw.
-{: .notice--info}
În funcție de mărimea cardului SD și de viteza calculatorului dumneavoastră, acest proces poate dura până la câteva ore!
-{: .notice--info}
Această pagină este doar pentru utilizatorii de Windows. Dacă nu sunteți pe windows, accesați paginile [F3 (linux)](f3-(linux)) sau [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Ce aveți nevoie
diff --git a/_pages/ro_RO/home.txt b/_pages/ro_RO/home.txt
index 070a8552f7..0f8a5461c3 100644
--- a/_pages/ro_RO/home.txt
+++ b/_pages/ro_RO/home.txt
@@ -37,7 +37,7 @@ Citiți toate paginile introductive înainte de a continua.
**Custom Firmware** ("CFW") va permite utilizarea unor hack-uri mult mai avansate pe care homebrew-ul simplu nu le poate face. De exemplu, patch-uirea de semnături va permite instalarea titlurilor nesemnate care apar direct în meniul HOME.
-CFW poate fi instalat ușor pe orice dispozitiv care este pe 11.5.0 sau inferior.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Ce instalează acest ghid?
diff --git a/_pages/ro_RO/homebrew-launcher-(alternatives).txt b/_pages/ro_RO/homebrew-launcher-(alternatives).txt
index 68e4ad17b6..b25cc34c5c 100644
--- a/_pages/ro_RO/homebrew-launcher-(alternatives).txt
+++ b/_pages/ro_RO/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternative)"
---
Homebrew Launcher-ul are multe puncte de intrare sau metode de a fi accesat.
-{: .notice--info}
În cazul în care browserhax nu este o opțiune (vedeți tabelul de mai jos), nu dețineți deja niciunul dintre aceste jocuri, și nu aveți un alt 3DS care are acces la Homebrew Launcher, cea mai ieftină opțiune este să cumpărați versiunea "Nintendo Selects" a jocului [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (asigurați-vă că luați cardul corect pentru regiunea dumneavoastră) și un [Powersaves](https://amzn.to/2fb3VY7) (compatibil cu toate regiunile), apoi folosiți oot3dhax din tabelul de mai jos.
-{: .notice--info}
Asigurați-vă că dispozitivul are pornit comunicarea fără fir pentru că udsploit (folosit în pagina următoare) va avea nevoie de modulul fără fir să fie activ ca să funcționeze, și unele dispozitive (New 3DS, New 2DS și Old 2DS) nu pot ajusta comunicarea fără fir din Homebrew Launcher. Comunicarea fără fir trebuie doar să fie pornită; nu este necesar să conectați dispozitivul la un punct de rețea.
-{: .notice--info}
#### Ce aveți nevoie
diff --git a/_pages/ro_RO/homebrew-launcher-(soundhax).txt b/_pages/ro_RO/homebrew-launcher-(soundhax).txt
index 745f96304a..ed78dc187d 100644
--- a/_pages/ro_RO/homebrew-launcher-(soundhax).txt
+++ b/_pages/ro_RO/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Homebrew Launcher-ul are multe puncte de intrare sau metode de a fi accesat.
-{: .notice--info}
Soundhax este compatibil cu versiunile 9.0.0 până la 11.3.0 în regiunile EUR, JPN, KOR și USA.
-{: .notice--info}
Asigurați-vă că dispozitivul are pornit comunicarea fără fir pentru că udsploit (folosit în pagina următoare) va avea nevoie de modulul fără fir să fie activ ca să funcționeze, și unele dispozitive (New 3DS, New 2DS și Old 2DS) nu pot ajusta comunicarea fără fir din Homebrew Launcher. Comunicarea fără fir trebuie doar să fie pornită; nu este necesar să conectați dispozitivul la un punct de rețea.
-{: .notice--info}
{% capture notice-1 %}
Țineți cont că actualizările cu cardul vor aduce actualizări numai funcțiilor de bază, cum ar fi System Settings, Meniul HOME, etc. Actualizările cu cardul nu vor aduce actualizări la Nintendo 3DS Sound și serviciilor de rețea, cum ar fi System Transfer, Internet Browser, StreetPass Mii Plaza, sau eShop.
-
+
Asta înseamnă că folosind o actualizare cu cardul de la o versiune care conține o versiune de Nintendo 3DS Sound inferioară *(<7.0.0 pentru Old 3DS din regiunile EUR, JPN, KOR, și USA)* către una care are o versiune Nintendo 3DS Sound superioară va strica [Soundhax](homebrew-launcher-(soundhax))! Veţi avea nevoie de o [metodă alternativă](homebrew-launcher-(alternatives)) pentru a intra în Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/ro_RO/installing-boot9strap-(browser).txt b/_pages/ro_RO/installing-boot9strap-(browser).txt
index 4c14b90987..639e8ceea5 100644
--- a/_pages/ro_RO/installing-boot9strap-(browser).txt
+++ b/_pages/ro_RO/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Instalând boot9strap (Browser)"
---
Dacă v-ați modat deja 3DS-ul înainte și aveți o configurare cu CFW bazat pe EmuNAND, acest ghid acoperă exclusiv SysNAND-ul și ar trebui să urmați toate instrucțiunile din SysNAND. Țineți cont că termenii EmuNAND și RedNAND se referă la implementări puțin diferite ale [aceluiași concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Ce aveți nevoie
diff --git a/_pages/ro_RO/installing-boot9strap-(dsiware).txt b/_pages/ro_RO/installing-boot9strap-(dsiware).txt
index a35ec6cd9d..9de70737fc 100644
--- a/_pages/ro_RO/installing-boot9strap-(dsiware).txt
+++ b/_pages/ro_RO/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Instalând boot9strap (DSiWare)" #
---
Exisată două metode diferite de a instala boot9strap folosind DSiWare pe 11.5.0.
-{: .notice--info}
Una dintre aceste metode funcționează numai cu patru jocuri specifice care nu mai sunt vândute pe eShop, în timp ce cealaltă metodă funcționează cu câteva jocuri care încă sunt vândute pe eShop.
-{: .notice--info}
Ambele metode au nevoie de două dispozitive. Un 3DS (sau 2DS) trebuie să porneacă pe un custom firmware (ca boot9strap sau arm9loaderhax) și este menționat ca *3DS-ul sursă*, în timp ce celălalt 3DS (sau 2DS) este pe 11.5.0 stoc și este menționat ca *3DS-ul țintă*.
-{: .notice--info}
-
-Ambele dispozitive TREBUIE să fie din aceeaşi regiune.
-{: .notice--warning}
Ambele metode vor presupune că 3DS-ul cu custom firmware folosește boot9strap sau arm9loaderhax și a completat acest ghid. Deși este posibil să se facă aceste metode cu un alt fel de custom firmware, acest lucru este dincolo de cunoștințele acestui ghid.
-{: .notice--info}
Ambele metode folosesc o combinație a exploit-ului "FIRM partitions known-plaintext" explicat în detaliu [aici](https://www.3dbrew.org/wiki/3DS_System_Flaws), și o eroare care permite jocurile DSiWare să citească și să scrie oriunde într-un NAND criptat.
-{: .notice--info}
-{% capture notice-4 %}
Ambele metode au nevoie să faceți un [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) de la un CFW 3DS către un 3DS stoc ca parte din pași. Transferurile de sistem vor merge *doar* în următoarele cazuri:
+ New 3DS sau New 2DS -> New 3DS sau New 2DS
+ Old 3DS sau Old 2DS -> Old 3DS sau Old 2DS
- + Old 3DS sau Old 2DS -> New 3DS sau New 2DS
-{% endcapture %}
+ + Old 3DS sau Old 2DS -> New 3DS sau New 2DS
-{{ notice-4 | markdownify }}
+Ambele dispozitive TREBUIE să fie din aceeaşi regiune.
+{: .notice--warning}
-În ambele cazuri, NNID-ul de pe 3DS-ul sursă va rămâne pe 3DS-ul țintă cu excepția să faceți un transfer de sistem înapoi sau să sunați la Nintendo! (detaliile se găsesc în descriere)
-{: .notice--danger}
-
-Transferurile de sistem pot fi făcute o dată pe săptămână pe fiecare NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Transferurile de sistem pot fi făcute o dată pe săptămână pe fiecare NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Instalând boot9strap (Injectare cu date de salvare DSiWare)](installing-boot9strap-(dsiware-game-injection-list))
-
+
Această metoda va avea nevoie ca 3DS-ul sursă să obțină în mod legitim una dintre următoarele jocuri:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ O copie piratată a jocului *nu* va funcționa, și toate aceste jocuri au fost
{% capture notice-1 %}
[Instalând boot9strap (Injectare cu Joc DSiWare)](installing-boot9strap-(dsiware-game-injection-list))
-
+
Această metoda va avea nevoie ca 3DS-ul sursă să cumpere sau să dețină în mod legitim una dintre jocurile listate pe pagina [Instalând boot9strap (Lista de Jocuri DSiWare pentru injectare)](installing-boot9strap-(dsiware-game-injection-list)).
-
+
O copie piratată a jocului *nu* va merge.
{% endcapture %}
diff --git a/_pages/ro_RO/installing-boot9strap-(dsiware-game-injection).txt b/_pages/ro_RO/installing-boot9strap-(dsiware-game-injection).txt
index b28a060597..6cc600246b 100644
--- a/_pages/ro_RO/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/ro_RO/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Instalând boot9strap (Injectare cu Joc DSiWare)"
---
Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
-{: .notice--info}
Pentru a folosi linkurile [magnetice](https://en.wikipedia.org/wiki/Magnet_URI_scheme) de pe această pagină, veți avea nevoie de un client de torrente ca [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Înainte de a proceda, asigurați-vă că ați citit toate notificările și avertismentele de pe [Instalând boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+Dacă nu folosiți `.firm`-ul corect care corespunde 3DS-ului țintă, veți face BRICK! Asigurați-vă că descărcați și-l folosiți pe cel corect!
{: .notice--danger}
#### Ce aveți nevoie
-* Două dispozitive 3DS
- + **3DS-ul sursă**: 3DS-ul care rulează un fel de custom firmware (cum ar fi boot9strap sau arm9loaderhax) *pe ultima versiune*
- + **3DS-ul țintă**: 3DS-ul pe firmware stoc *11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Să aveți achiziționat (sau deja deținut) un joc DSiWare compatibil de pe eShop pe **3DS-ul sursă**
+ O copie piratată a jocului **nu** va merge
+ Pentru o listă de jocuri compatibile, vedeți pagina [Instalând boot9strap (Lista de jocuri DSiWare pentru injectare)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/ro_RO/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/ro_RO/installing-boot9strap-(dsiware-game-injection-list).txt
index d8e4ab84fe..2896045316 100644
--- a/_pages/ro_RO/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/ro_RO/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Instalând boot9strap (Lista de Injectare cu Joc DSiWare)"
---
Aceasta este o listă generată automat cu toate jocurile compatibile pentru [Instalând boot9strap (DSiWare)](installing-boot9strap-(dsiware)).
-{: .notice--primary}
-Această listă este secționată după regiuni în ordinea: USA, EUR, JPN.
-{: .notice--info}
-
-Fiecare secțiune este sortată după preț crescător.
-{: .notice--info}
+Această listă este secționată după regiuni în ordinea: USA, EUR, JPN. Fiecare secțiune este sortată după preț crescător.
Codurile QR pot fi scanate apăsând (L + R) în meniul HOME, apoi apăsând iconița QR pe ecranul inferior.
-{: .notice--info}
-Cerințele de mărime există deoarece DSiWare-ul injectat și salvarea hackuită nu trebuie să își modifice mărimile pentru ca transferul de sistem să meargă în mod corespunzător, însemnând că DSiWare-ul donator trebuie să fie destul de mare cât să încapă în DSiWare-ul hackuit.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/ro_RO/installing-boot9strap-(dsiware-save-injection).txt b/_pages/ro_RO/installing-boot9strap-(dsiware-save-injection).txt
index aa7c012b2c..a2d2ca329c 100644
--- a/_pages/ro_RO/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/ro_RO/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Instalând boot9strap (Injectare cu date de salvare DSiWare)"
---
Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
-{: .notice--info}
Pentru a folosi linkurile [magnetice](https://en.wikipedia.org/wiki/Magnet_URI_scheme) de pe această pagină, veți avea nevoie de un client de torrente ca [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Înainte de a proceda, asigurați-vă că ați citit toate notificările și avertismentele de pe [Instalând boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
Dacă nu folosiți `.firm`-ul corect care corespunde 3DS-ului țintă, veți face BRICK! Asigurați-vă că descărcați și-l folosiți pe cel corect!
{: .notice--danger}
#### Ce aveți nevoie
-* Două dispozitive 3DS
- + **3DS-ul sursă**: 3DS-ul care rulează un fel de custom firmware (cum ar fi boot9strap sau arm9loaderhax) *pe ultima versiune*
- + **3DS-ul țintă**: 3DS-ul pe firmware stoc *11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Să dețineți deja una dintre următoarele jocuri DSiWare exploatabile (o copie piratată a jocului **nu** va merge) pe **3DS-ul sursă**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/ro_RO/installing-boot9strap-(hardmod).txt b/_pages/ro_RO/installing-boot9strap-(hardmod).txt
index 7683fd6ea1..d0e3435540 100644
--- a/_pages/ro_RO/installing-boot9strap-(hardmod).txt
+++ b/_pages/ro_RO/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Instalând boot9strap (Hardmod)" #
---
Un ghid excelent pentru a face un hardmod poate fi găsit [aici](https://gbatemp.net/threads/414498/). Dacă sunteţi pe un New 3DS, citiţi [asta](https://github.com/Plailect/Guide/issues/681) şi [asta](https://github.com/Plailect/Guide/issues/1185) înainte de a face hardmod.
-{: .notice--info}
Acest lucru este în prezent o implementare a exploit-ului "Partiții FIRM de text simplu" detaliat [aici](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
Pentru a folosi linkurile [magnetice](https://en.wikipedia.org/wiki/Magnet_URI_scheme) de pe această pagină, veți avea nevoie de un client de torrente ca [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Aceasta va funcționa pe New 3DS, New 2DS, Old 3DS și Old 2DS pe *toate* versiunile la care aveți un fişier `.firm` corespunzător.
-{: .notice--success}
#### Ce aveți nevoie
diff --git a/_pages/ro_RO/installing-boot9strap-(homebrew-launcher).txt b/_pages/ro_RO/installing-boot9strap-(homebrew-launcher).txt
index ab58537d31..b2acae67b8 100644
--- a/_pages/ro_RO/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/ro_RO/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Instalând boot9strap (Homebrew Launcher)"
---
Dacă v-ați modat deja 3DS-ul înainte și aveți o configurare cu CFW bazat pe EmuNAND, acest ghid acoperă exclusiv SysNAND-ul și ar trebui să urmați toate instrucțiunile din SysNAND. Țineți cont că termenii EmuNAND și RedNAND se referă la implementări puțin diferite ale [aceluiași concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instrucțiuni
@@ -20,6 +19,8 @@ Dacă v-ați modat deja 3DS-ul înainte și aveți o configurare cu CFW bazat pe
+ Dacă *încă* mai primiți eroarea "PM INIT FAILED", încercaţi să folosiți [versiunea r19 de safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Dacă se blochează, închideți dispozitivul forțat ținând apăsat butonul de pornire și încercați din nou
1. Dacă exploit-ul a avut succes, veți porni în SafeB9SInstaller
+ + Dacă lansați în meniul de configurare Luma3DS în loc de SafeB9SInstaller, închideți dispozitivul și asigurați-vă că `safehaxpayload.bin` există pe rădăcina cardului SD
+ + Dacă pare că `safehaxpayload.bin` există pe rădăcina cardului SD dar tot sunteți lansat în meniul de configurare Luma3DS, asigurați-vă că ați [activat opțiunea de a afișa extensii de fișier](file-extensions-(windows))
##### Secțiunea II - Instalând boot9strap
diff --git a/_pages/ro_RO/installing-boot9strap-(mset).txt b/_pages/ro_RO/installing-boot9strap-(mset).txt
index 7f0a9334a7..0316190e49 100644
--- a/_pages/ro_RO/installing-boot9strap-(mset).txt
+++ b/_pages/ro_RO/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Instalând boot9strap (MSET)"
---
Dacă v-ați modat deja 3DS-ul înainte și aveți o configurare cu CFW bazat pe EmuNAND, acest ghid acoperă exclusiv SysNAND-ul și ar trebui să urmați toate instrucțiunile din SysNAND. Țineți cont că termenii EmuNAND și RedNAND se referă la implementări puțin diferite ale [aceluiași concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Ce aveți nevoie
diff --git a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..37a870ac06
--- /dev/null
+++ b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Ce aveți nevoie
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)*
+* Cea mai nouă versiune de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(fișierul `.7z`)*
+* [Kit-ul de începător](http://smealum.github.io/ninjhax2/starter.zip) în Homebrew
+
+#### Instrucțiuni
+
+##### Secțiunea I - Preparații
+
+1. Închideți dispozitivul
+1. Introduceți cardul SD în calculator
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copiați _conținutul de_ pe `starter.zip` în rădăcina cardului SD
+1. Creați un folder numit 'boot9strap' pe rădăcina cardului SD
+1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD
+
+ 
+ {: .notice--info}
+
+1. Reintroduceți cardul SD în dispozitivul dumneavoastră
+1. Porniți dispozitivul
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Închideți dispozitivul
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. Dacă exploit-ul a avut succes, veți porni în SafeB9SInstaller
+
+##### Secțiunea III - Instalând boot9strap
+
+1. Așteptaţi ca toate verificările de siguranță să fie completate
+1. Când vi se cere, introduceți combinația de butoane ca să instalați boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Secțiunea IV - Configurând Luma3DS
+
+1. Introduceți cardul SD în calculator
+1. Delete `boot.firm` from the root of your SD card
+1. Copiați `boot.firm` de la Luma3DS `.7z` în rădăcina cardului SD
+1. Reintroduceți cardul SD în dispozitivul dumneavoastră
+1. Porniți dispozitivul
+1. Dispozitivul dumneavoastră ar trebui să fi pornit meniul de configurare Luma3DS
+ + Dacă vă apare un ecran negru, [urmați acest ghid de depanare](troubleshooting#ts_sys_b9s)
+1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele:
+ + **"Show NAND or user string in System Settings"**
+1. Apăsați (Start) pentru a salva și reporni
+ + Dacă primiţi o eroare, doar continuați spre pagina următoare
+
+___
+
+Continuați la [Finalizând instalarea](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Așteptați până când procesul este terminat
+1. Apăsați (B) ca să vă întoarceți în meniul principal
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/ro_RO/move-emunand.txt b/_pages/ro_RO/move-emunand.txt
index c2b84f16f7..a3f095e640 100644
--- a/_pages/ro_RO/move-emunand.txt
+++ b/_pages/ro_RO/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Mutare EmuNAND"
---
Aceasta este o secțiune suplimentară pentru a muta conținutul unui EmuNAND precedent către noul CFW SysNAND, după care se va elimina partiția veche EmuNAND. Țineți cont că termenii EmuNAND și RedNAND se referă la implementări puțin diferite ale [aceluiași concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
-{: .notice--info}
+Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
**Trebuie să aveți deja instalat Luma3DS şi boot9strap sau arm9loaderhax pentru a-l folosi.**
{: .notice--danger}
diff --git a/_pages/ro_RO/ntr-and-cubic-ninja.txt b/_pages/ro_RO/ntr-and-cubic-ninja.txt
index 3082f153ad..9532cb2388 100644
--- a/_pages/ro_RO/ntr-and-cubic-ninja.txt
+++ b/_pages/ro_RO/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR şi Cubic Ninja"
---
Pentru a folosi linkurile [magnetice](https://en.wikipedia.org/wiki/Magnet_URI_scheme) de pe această pagină, veți avea nevoie de un client de torrente ca [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja va merge doar pe JPN New 3DS!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Ce aveți nevoie
diff --git a/_pages/ro_RO/ntrboot.txt b/_pages/ro_RO/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/ro_RO/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/ro_RO/region-changing.txt b/_pages/ro_RO/region-changing.txt
index 63db5a2352..3869933e7c 100644
--- a/_pages/ro_RO/region-changing.txt
+++ b/_pages/ro_RO/region-changing.txt
@@ -3,16 +3,12 @@ title: "Schimbând regiunea"
---
Aceasta este o secţiune opţională pentru a schimba regiunea CFW-ului din SysNAND. Acest lucru se realizează instalând imaginea CTRTransfer 9.2.0 pentru regiunea la care doriţi să schimbaţi.
-{: .notice--primary}
-**Schimbarea regiunii este aproape inutilă deoarece Luma3DS permite jucarea jocurilor din altă regiune şi [emulare individuală a regiunii jocului](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
Pentru a folosi linkurile [magnetice](https://en.wikipedia.org/wiki/Magnet_URI_scheme) de pe această pagină, veți avea nevoie de un client de torrente ca [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
-{: .notice--info}
Acest proces vă va deconecta NNID-ul din sistem, deoarece nu va mai fi compatibil în continuare. NNID-urile sunt blocate pe regiunea dispozitivului care le-ați creat, şi nu pot fi transferate între regiuni fără [un proces foarte complicat si avansat](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Acest proces vă va deconecta NNID-ul din sistem, deoarece nu va mai fi compatib
După acest proces, numai **New 3DS-urile care nu au accesat niciodată eShop-ul înainte** şi **orice Old 3DS** vor trebui să acceseze eShop-ul după ce vor crea un NNID nou în noua lor regiune. New 3DS-urile cu regiune schimbată care deja au accesat eShop-ul pe regiunile originale nu pot crea un nou NNID și nu vor putea accesa eShop-ul pe noua regiune!
{: .notice--warning}
-Reţineţi că ocazional eShop-ul în mod inexplicabil nu va mai funcţiona pe dispozitivele pe care ar trebui să funcţioneze. Acest lucru are în totalitate de a face cu serverele Nintendo, şi nu am nici un control asupra lor.
-{: .notice--warning}
-
-Similar cu avertizarea de mai sus, ţineţi cont că ocazional eShop-ul va funcţiona în mod inexplicabil pe dispozitive pe care ar trebui să nu funcționeze (cum ar fi unele New 3DS-uri). Motivul pentru acest lucru este necunoscut.
-{: .notice--warning}
+Reţineţi că ocazional eShop-ul în mod inexplicabil nu va mai funcţiona pe dispozitivele pe care ar trebui să funcţioneze. Acest lucru are în totalitate de a face cu serverele Nintendo, şi nu am nici un control asupra lor. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Motivul pentru acest lucru este necunoscut.
Schimbând regiunea folosind CTRTransfer (ceea ce este folosit în aceasta metodă) pare să provoace patch-urile de redeschidere să nu mai funcționeze. Cauza acesteia este necunoscută, dar momentan utilizatorii de Old 3DS nu vor avea posibilitatea să joace jocurile care se joacă în modul de memorie extinsă (cum ar fi Monster Hunter, Super Smash Bros., și Pokémon Sun / Moon) până când nu își formatează dispozitivele.
-{: .notice--warning}
-Niciodată să nu formatați un New 2DS pe o versiune <11.4.0, sau vă va fi imposibil să faceți configurarea inițială!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**Trebuie să aveți deja instalat Luma3DS şi boot9strap sau arm9loaderhax pentru a-l folosi.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Ce aveți nevoie
diff --git a/_pages/ro_RO/site-navigation.txt b/_pages/ro_RO/site-navigation.txt
index e469ea9fcb..a8187406b1 100644
--- a/_pages/ro_RO/site-navigation.txt
+++ b/_pages/ro_RO/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [Întrebări frecvente](faq)
+ [Extensii de fișier (Windows)](file-extensions-(windows))
+ [Finalizând instalarea](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Începeți (New 3DS)](get-started-(new-3ds))
+ [Începeți (Old 3DS)](get-started-(old-3ds))
+ [Începeți](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Instalând boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Instalând boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Instalând boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Instalând boot9strap (ntrboothax)](installing-boot9strap-(ntrbooothax))
++ [ntrboot](ntrboot)
+ [Mutare EmuNAND](move-emunand)
+ [NTR și Cubic Ninja](ntr-and-cubic-ninja)
+ [Scimbând regiunea](region-changing)
diff --git a/_pages/ro_RO/troubleshooting.txt b/_pages/ro_RO/troubleshooting.txt
index 13e26daae8..e8e4fef11e 100644
--- a/_pages/ro_RO/troubleshooting.txt
+++ b/_pages/ro_RO/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Depanare"
Dacă nu puteți să porniți dispozitivul, vă rugăm să vă uitați spre secțiunea potrivită pentru dumneavoastră, și să urmați instrucțiunile. Odată ce o soluție funcționează pentru dumneavoastră, puteți continua cu ghidul principal
(Această secțiune este destul de lungă, incercați să folosiți Ctrl+F pentru a căuta problema dumneavoastră.)
-{: .notice--primary}
-**Dacă tot nu puteți să vă rezolvați problema și aveți nevoie de ajutor, vă rugăm să inserați conținutul tuturor fișierelor de .log relevante din rădăcina cardului SD în [Gist](https://gist.github.com/), apoi întoarceți-vă după ajutor pregătit cu o descriere detaliată a problemei și ce ați încercat.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
Pentru a folosi linkurile [magnetice](https://en.wikipedia.org/wiki/Magnet_URI_scheme) de pe această pagină, veți avea nevoie de un client de torrente ca [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## Funcționalitatea DS / DSi este stricată după completarea ghidului
diff --git a/_pages/ro_RO/uninstall-cfw.txt b/_pages/ro_RO/uninstall-cfw.txt
index 4d9e03adee..51ebdab859 100644
--- a/_pages/ro_RO/uninstall-cfw.txt
+++ b/_pages/ro_RO/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Dezinstalare CFW"
---
Acest procedeu va elimina complet CFW-ul de pe dispozitiv, inclusiv Boot9Strap și Luma3DS, penru scopul de a restaura înapoi dispozitivul pe stoc.
-{: .notice--danger}
Orice joc nesemnat (nelegitim) va deveni inutilizabil și poate fi eliminaat manual folosind secțiunea Data Management de pe System Settings. Folosiți un [manager de date de salvare](https://github.com/J-D-K/JKSM/releases/latest) pentru a face copii de rezervă la orice joc nesemnat (nelegitim) de care vă pasă.
-{: .notice--info}
Acest lucru nu va afecta NNID-ul, orice joc cumpărat în mod legitim, sau orice date de salvare pentru acele jocuri cumpărate legitim.
-{: .notice--info}
Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
-{: .notice--info}
#### Ce aveți nevoie
diff --git a/_pages/ro_RO/updating-b9s.txt b/_pages/ro_RO/updating-b9s.txt
index 0babaf50ee..612dd079e4 100644
--- a/_pages/ro_RO/updating-b9s.txt
+++ b/_pages/ro_RO/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Actualizând B9S" #
---
Această pagină este pentru utilizatorii de boot9strap ca să-și actualizeze instalarea către ultima versiune.
-{: .notice--info}
Țineți cont că cea mai recentă actualizare de Luma3DS *nu* este compatibilă cu boot9strap versiunea 1.0. *Trebuie* să actualizați instalarea de boot9strap către versiunea 1.2 urmărind instrucțiunile de pe această pagină.
-{: .notice--warning}
{% capture notice-1 %}
Au existat rapoarte de un val de banuri adresate utilizatorilor de CFW de către Nintendo. Pentru a vă proteja, efectuaţi următorii paşi înainte de a începe acest ghid:
diff --git a/_pages/ru_RU/9.2.0-ctrtransfer.txt b/_pages/ru_RU/9.2.0-ctrtransfer.txt
index ca66315511..7f4c69a807 100644
--- a/_pages/ru_RU/9.2.0-ctrtransfer.txt
+++ b/_pages/ru_RU/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
Это дополнительный раздел, рассказывающий об установке образа 9.2.0 CTRTransfer на ваше устройство.
-{: .notice--primary}
Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Обратите внимание, что если у вас имеются другие файлы помимо `GodMode9.firm` в папке `/luma/payloads/` на SD-карте, удержание кнопки (Start) при загрузке будет запускать "chainloader menu", где вам нужно будет использовать D-Pad и кнопку (A) для выбора "GodMode9" при выполнении этих инструкций.
-{: .notice--info}
Никогда не форматируйте New 2DS на прошивках ниже 11.4.0, иначе вы не сможете закончить первоначальную настройку!
{: .notice--danger}
diff --git a/_pages/ru_RU/a9lh-to-b9s.txt b/_pages/ru_RU/a9lh-to-b9s.txt
index 3b1f46639c..b18c751199 100644
--- a/_pages/ru_RU/a9lh-to-b9s.txt
+++ b/_pages/ru_RU/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "С A9LH до B9S"
---
Эта страница предназначена для пользователей arm9loaderhax, чтобы обновить их устройства до boot9strap.
-{: .notice--info}
Все будущие релизы Luma3DS будут только в формате `.firm`, который будет совместим только с boot9strap и sighax. Это означает, что для того, чтобы продолжать получать последние обновления Luma3DS, вы должны использовать эту страницу для обновления установки.
-{: .notice--info}
+
+Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
Если в Luma3DS вы используете PIN-код, то при работе SafeB9SInstaller вы получите ошибку "OTP Crypto Fail". Для решения этой проблемы временно откажитесь от использования PIN-кода (вы сможете включить его обратно после обновления).
{: .notice--warning}
-Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
Сообщается о волне банов, выданных Nintendo пользователям CFW. Чтобы защитить себя, выполните следующие шаги перед началом этого руководства:
diff --git a/_pages/ru_RU/cart-update.txt b/_pages/ru_RU/cart-update.txt
index bd3ad72395..a69c47767d 100644
--- a/_pages/ru_RU/cart-update.txt
+++ b/_pages/ru_RU/cart-update.txt
@@ -3,20 +3,18 @@ title: "Обновление картриджем"
---
Все картриджи содержат в себе обновление системы до версии, которая необходима для запуска игры. Благодаря этому возможно выполнить обновление системы даже без доступа к интернету.
-{: .notice--info}
{% capture notice-1 %}
Заметьте, что обновление на картридже позволяет обновить только базовые функции консоли, такие как Системные настройки, меню HOME, и т. п. Приложение Звук Nintendo 3DS и сетевые функции, такие как Перенос системы, Интернет-браузер, Площадь StreetPass Mii или eShop с картриджа не обновляются.
-
+
Это означает, что обновление картриджем с версии, содержащей старое приложение Звук Nintendo 3DS *(<7.0.0 для Old 3DS регионов EUR, JPN, KOR, и USA)*, до версии с новым приложением Звук Nintendo 3DS сделает невозможной работу [Soundhax](homebrew-launcher-(soundhax))! Вам понадобится [альтернативный метод](homebrew-launcher-(alternatives)) запуска Homebrew Launcher!
+
+Это также означает, что обновление картриджем НЕ установит браузер, если у вас его ещё нет. Будет произведено обновление **только системных файлов** (*например, 2.1.0-0 -> 6.0.0-0)*. Если последняя цифра номера версии у вас *(-0)*, то она **не** изменится.
{% endcapture %}
{{ notice-1 | markdownify }}
-Это также означает, что обновление картриджем НЕ установит браузер, если у вас его ещё нет. Будет произведено обновление **только системных файлов** (*например, 2.1.0-0 -> 6.0.0-0)*. Если последняя цифра номера версии у вас *(-0)*, то она **не** изменится.
-{: .notice--warning}
-
**Обновление с помощью картриджа, содержащего версию 9.9.0 или выше, удалит Интернет-браузер до тех пор, пока не будет выполнено стандартное онлайн-обновление!**
{: .notice--danger}
diff --git a/_pages/ru_RU/credits.txt b/_pages/ru_RU/credits.txt
index 4f9cb8a206..fdf5669959 100644
--- a/_pages/ru_RU/credits.txt
+++ b/_pages/ru_RU/credits.txt
@@ -9,7 +9,6 @@ title: "Благодарности"
{: .notice--primary}
Если я кого-то забыл, свяжитесь со мной и я добавлю ваше имя.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/ru_RU/f3-(linux).txt b/_pages/ru_RU/f3-(linux).txt
index c5fd71ca19..dd6729a064 100644
--- a/_pages/ru_RU/f3-(linux).txt
+++ b/_pages/ru_RU/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
Этот дополнительный раздел содержит информацию о проверке SD-карты на ошибки с помощью F3.
-{: .notice--info}
В зависимости от размера SD-карты и скорости компьютера этот процесс может занять до нескольких часов!
-{: .notice--info}
Этот раздел предназначен только для пользователей Linux. Если у вас не Linux, воспользуйтесь [H2testw (windows)](h2testw-(windows)) или [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Что понадобится
diff --git a/_pages/ru_RU/f3x-(mac).txt b/_pages/ru_RU/f3x-(mac).txt
index 46e7811592..6be06bf428 100644
--- a/_pages/ru_RU/f3x-(mac).txt
+++ b/_pages/ru_RU/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
Этот дополнительный раздел содержит информацию о проверке SD-карты на ошибки с помощью F3X.
-{: .notice--info}
В зависимости от размера SD-карты и скорости компьютера этот процесс может занять до нескольких часов!
-{: .notice--info}
Этот раздел предназначен для пользователей Mac. Если у вас не Mac, воспользуйтесь [H2testw (windows)](h2testw-(windows)) или [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### Что понадобится
diff --git a/_pages/ru_RU/faq.txt b/_pages/ru_RU/faq.txt
index 8e5360f0ee..dbaf046c7c 100644
--- a/_pages/ru_RU/faq.txt
+++ b/_pages/ru_RU/faq.txt
@@ -6,52 +6,52 @@ title: "Вопросы и ответы"
**В:** *Моя консоль на последней версии прошивки, могу ли я её взломать?*
**О:** Да
-
+
**В:** *Как можно обновить Luma3DS?*
**О:** Используйте Luma3DS Updater
-
+
**В:** *Я слышал, что в продаже есть различные устройства (Gateway, Sky3DS, и т. д.), нужны ли они мне?*
**О:** Нет. boot9strap - это лучший метод взлома, который запускается на ранних стадиях загрузки консоли.
-
+
**В:** *Как мне перенести свои сохранения с Gateway на консоль для установленных игр?*
**О:** Ознакомьтесь с [этим ресурсом](https://gbatemp.net/threads/425743/) (англ.)
-
+
**В:** *Что мне потребуется для выполнения руководства?*
**О:** Руководство можно выполнить, используя только бесплатное ПО
-
+
**В:** *Насколько опасно взламывать консоль?*
**О:** На данный момент практически невозможно испортить консоль, если не игнорировать все меры предосторожности.
-
+
**В:** *Смогу ли я после взлома запускать сторонние программы и эмуляторы?*
**О:** Да! Кастомная прошивка не только поддерживает Homebrew Launcher, но и сохраняет возможность его запуска даже после обновлений.
-
+
**В:** *Смогу ли я играть в игры других регионов?*
**О:** Luma3DS поддерживает Region Free патчи, которые позволяют пользователям без усилий запускать игры любого региона.
-
+
**В:** *Безопасно ли обновлять кастомную прошивку, установленную в SysNAND?*
**О:** Да. Это безопасно, хватит уже спрашивать об этом.
-
+
**В:** *Куда я могу обратиться за помощью?*
**О:** Для поддержки, обратитесь за помощью в [Nintendo Homebrew on Discord (англ.)](https://discord.gg/MWxPgEp).
-
+
**В:** *Могу ли я использовать SD-карту размером 4 ГБ (или меньше)?*
**О:** Да!
-
+
**В:** *Могу ли я использовать SD-карту размером 128 ГБ (или больше)?*
**О:** Да, но некоторые пользователи сообщали о замедлении работы при использовании таких больших накопителей. Стоит уточнить, что нельзя форматировать карту в exFAT; необходимо использовать FAT32.
-
+
**В:** *Как мне перенести данные на новую SD-карту?*
**О:** Просто скопируйте все файлы на новую SD-карту.
-
+
**В:** *Могу ли я сохранить свой NNID?*
**О:** Если точно следовать этому руководству от начала и до конца, вы сохраните свой NNID.
-
+
**В:** *Работает ли Передача Данных (System Transfer)?*
**О:** После завершения руководства, Передача данных (System transfer) может осуществляться со взломанной (B9S) 3DS или 2DS либо на неё без каких либо ограничений, как это бы работало на не взломанной консоли или EmuNAND (все нелегально полученные игры/темы/загружаемый контент будут потеряны при передаче, однако сохранения останутся даже для потерянных игр).
-
+
**В:** *Могу ли я обойтись без использования компьютера (например, использовать телефон на Android)?*
**О:** Все, что вам понадобится, это возможность копировать файлы на SD-карту!
-
+
**В:** *Помогите! Что-то пошло не так, и консоль больше не запускается...*
**О:** Ознакомьтесь с разделом [проблемы и их решения](troubleshooting).
diff --git a/_pages/ru_RU/file-extensions-(windows).txt b/_pages/ru_RU/file-extensions-(windows).txt
index fb7b6602f9..469828f4fb 100644
--- a/_pages/ru_RU/file-extensions-(windows).txt
+++ b/_pages/ru_RU/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "Расширения файлов (Windows)"
---
Это дополнительный раздел, служащий для отключения настройки Windows, по умолчанию скрывающей расширения файлов.
-{: .notice--info}
Это позволит вам легче отыскать необходимые файлы в других частях руководства.
-{: .notice--info}
#### Инструкция
diff --git a/_pages/ru_RU/finalizing-setup.txt b/_pages/ru_RU/finalizing-setup.txt
index 06a3aa7697..bdb6414a01 100644
--- a/_pages/ru_RU/finalizing-setup.txt
+++ b/_pages/ru_RU/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Завершение установки"
#### Описание шагов
-{% capture notice-2 %}
Файл `boot.firm` - это то, что boot9strap запускает после загрузки из NAND, и этот файл может быть любым arm9-приложением. Этот файл может быть заменён когда угодно, однако Luma3DS позволяет запускать другие arm9 приложения в FIRM формате, используя свой загрузчик.
-
+
Мы используем Luma3DS от [AuroraWright](https://github.com/AuroraWright/), чтобы запускать пропатченный SysNAND напрямую, поэтому необходимость в каком-либо виде EmuNAND полностью пропадает, что значительно упрощает использование взломанной 3DS и экономит место на SD-карте.
-
+
В процессе мы установим и настроим следующие программы:
+ **FBI** *(установщик приложений и игр в формате CIA)*
@@ -18,10 +17,6 @@ title: "Завершение установки"
+ **GodMode9** *(многофункциональная утилита для работы с NAND и картриджами)*
+ **Homebrew Launcher Loader** *(запускает Homebrew Launcher в качестве обычного приложения благодаря магии Rosalina)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Что понадобится
* Свежая версия [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(`.cia` файл)*
@@ -134,8 +129,10 @@ title: "Завершение установки"
___
{% capture notice-10 %}
-Теперь вы можете использовать Luma3DS Updater для обновления кастомной прошивки. Запустите его и нажмите (А).
+Теперь вы можете использовать Luma3DS Updater для обновления кастомной прошивки. Запустите его и нажмите (А).
+
Это не тоже самое что Обновление системы (System Update). Это приложение обновляет только файлы Luma3DS.
+
Это обновит только те файлы Luma3DS, которые находятся на SD-карте. Если вы включите консоль без SD-карты, она загрузится используя Luma3DS из CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ ___
{% capture notice-6 %}
Теперь по умолчанию будет запускаться Luma3DS CFW SysNAND.
+
Для запуска конфигуратора Luma3DS включите консоль с зажатой кнопкой (Select).
+
Теперь вы можете удерживать (Start) при загрузке для запуска Luma3DS chainloader меню (обратите внимание, что Luma3DS chainloader меню отображается только если существует более одного приложения).
+
Теперь, с помощью зажатой комбинации клавиш (Start) + (Select) + (X) при включении консоли, вы сможете сохранить копии ARM11 bootrom (`boot11.bin`), ARM9 bootrom (`boot9.bin`) и уникального OTP вашей консоли (`OTP.bin`) в папку `/boot9strap/` на SD-карте (обратите внимание, что этот процесс не предусматривает отображения какого-либо оповещения).
+
Теперь нажатие (L) + (Вниз) + (Select) в запущенной системе открывает меню Rosalina, встроенное в Luma3DS. Полный список функций Rosalina можно найти тут: [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0) (англ.)
{% endcapture %}
@@ -156,7 +157,7 @@ ___
{% capture notice-7 %}
Удалите любые лишние файлы и папки из корня вашей SD-карты, которых *нет* на следующем изображении. Если у вас есть папка `DCIM`, оставьте ее. Она содержит фотографии, сделанные камерой 3DS:
-
+
{% endcapture %}
diff --git a/_pages/ru_RU/flashing-ntrboot-(custom-firmware).txt b/_pages/ru_RU/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..5f4acbf420
--- /dev/null
+++ b/_pages/ru_RU/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Что понадобится
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Инструкция
+
+##### Часть I - Подготовительные работы
+
+1. Выключите **исходную 3DS**
+1. Вставьте SD-карту **исходной 3DS** в компьютер
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Нажмите (B) для возврата в главное меню
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Нажмите (B) для возврата в главное меню
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ru_RU/flashing-ntrboot-(powersaves).txt b/_pages/ru_RU/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/ru_RU/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/ru_RU/get-started-(new-3ds).txt b/_pages/ru_RU/get-started-(new-3ds).txt
index a47e9c3b23..b70c8db93a 100644
--- a/_pages/ru_RU/get-started-(new-3ds).txt
+++ b/_pages/ru_RU/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Начало (New 3DS)"
---
-Выберите подходящую для вашей версии страницу из таблицы ниже.
-{: .notice--primary}
+Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Это означает, к примеру, что диапазон "с 9.0.0 по 9.2.0" включает в себя 9.0.0, 9.1.0 и 9.2.0.
-Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Это означает, к примеру, что диапазон "с 9.0.0 по 9.2.0" включает в себя 9.0.0, 9.1.0 и 9.2.0.
-{: .notice--info}
-
-Обратите внимание, что последнее число вашей версии системы (после тире) относится к версии браузера. В настоящее время версия браузера не имеет значения для New 3DS в данном руководстве.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. В настоящее время версия браузера не имеет значения для New 3DS в данном руководстве.
Любую версию системного ПО можно обновить на более высокую из этой же колонки [с помощью картриджа](cart-update) и после этого продолжать выполнять инструкцию.
-{: .notice--info}
Версия программного обеспечения отображается в правом нижнем углу верхнего экрана в приложении Системные настройки (System settings).
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ title: "Начало (New 3DS)"
ВСЕ ВЕРСИИ
|
- Установка boot9strap (ntrboothax)
(Требуется совместимый флешкартридж) or Установка boot9strap (Hardmod)
(Требуется пайка) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/ru_RU/get-started-(old-3ds).txt b/_pages/ru_RU/get-started-(old-3ds).txt
index f9183b1193..c0d592c17f 100644
--- a/_pages/ru_RU/get-started-(old-3ds).txt
+++ b/_pages/ru_RU/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Начало (Old 3DS)"
---
-Выберите подходящую для вашей версии страницу из таблицы ниже.
-{: .notice--primary}
+Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Это означает, к примеру, что диапазон "с 9.0.0 по 9.2.0" включает в себя 9.0.0, 9.1.0 и 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Если версия оканчивается на -0, значит, у вас отсутствует браузер, любое другое число больше 0 говорит о том, что браузер установлен.
-{% capture notice-1 %}
-Два последних столбца относятся к последнему числу, указанному в версии прошивки вашего устройства (которое обозначает версию установленного браузера в системе). Если версия оканчивается на -0, значит, у вас отсутствует браузер, любое другое число больше 0 говорит о том, что браузер установлен.
-
-Столбцы "С" и "По" обозначают границы диапазона. Это означает, к примеру, что диапазон "с 9.0.0 по 9.2.0" включает в себя 9.0.0, 9.1.0 и 9.2.0.
-
Например, если у вас версия прошивки "5.0.0-0E", необходимо выбрать ячейку на пересечении колонки "Без браузера" и ряда "С 5.0.0 по 5.1.0" так как версия системы находится в этом диапазоне и в системе не установлен браузер.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
Любую версию системного ПО можно обновить на более высокую из этой же колонки [с помощью картриджа](cart-update) и после этого продолжать выполнять инструкцию.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Заметьте, что обновление на картридже позволяет обновить только базовые функции консоли, такие как Системные настройки, меню HOME, и т. п. Приложение Звук Nintendo 3DS и сетевые функции, такие как Перенос системы, Интернет-браузер, Площадь StreetPass Mii или eShop с картриджа не обновляются.
-
-Это означает, что обновление картриджем с версии, содержащей старое приложение Звук Nintendo 3DS *(<7.0.0 для Old 3DS регионов EUR, JPN, KOR, и USA)*, до версии с новым приложением Звук Nintendo 3DS сделает невозможной работу [Soundhax](homebrew-launcher-(soundhax))! Вам понадобится [альтернативный метод](homebrew-launcher-(alternatives)) запуска Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-Если вы обновились с помощью игрового картриджа, содержащего версию 9.9.0 или выше *(то есть ваша версия сейчас 9.9.0 или выше, однако версия браузера -25 или ниже, например - 10.2.0-24)*, браузер был удалён из системы и в этом случае следует воспользоваться колонкой "Без браузера".
-{: .notice--warning}
Версия программного обеспечения отображается в правом нижнем углу верхнего экрана в приложении Системные настройки (System settings).
-{: .notice--success}
{: .notice--info}
+Если вы обновились с помощью игрового картриджа, содержащего версию 9.9.0 или выше *(то есть ваша версия сейчас 9.9.0 или выше, однако версия браузера -25 или ниже, например - 10.2.0-24)*, браузер был удалён из системы и в этом случае следует воспользоваться колонкой "Без браузера".
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/ru_RU/get-started.txt b/_pages/ru_RU/get-started.txt
index a2c0bbc3d6..050faf8d14 100644
--- a/_pages/ru_RU/get-started.txt
+++ b/_pages/ru_RU/get-started.txt
@@ -2,23 +2,14 @@
title: "Начало"
---
-Эта страница содержит инструкции по установке boot9strap на *не взломанную* 3DS или 2DS. Если у вас уже установлен arm9loaderhax, и вы хотите обновиться до boot9strap, следуйте инструкциям в разделе [с A9LH до B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Эта страница поможет вам понять, откуда именно следует начать.
-Цвет вашего устройства может отличаться от представленного на картинках, вам стоит обратить внимание на расположение кнопок и особенности каждого типа устройства, чтобы сделать правильный выбор.
-{: .notice}
-
-Нажмите на изображение вашего устройства, чтобы перейти на соответствующую страницу.
-{: .notice--primary}
-
-Разные модели, версии, и регионы устройств требуют различных действий для установки кастомной прошивки с boot9strap Эта страница поможет вам понять, откуда именно следует начать.
-{: .notice--info}
+Нажмите на изображение вашего устройства, чтобы перейти на соответствующую страницу. Цвет вашего устройства может отличаться от представленного на картинках, вам стоит обратить внимание на расположение кнопок и особенности каждого типа устройства, чтобы сделать правильный выбор.
Если вы уже взламывали вашу 3DS ранее и использовали кастомную прошивку на основе EmuNAND, следуйте инструкциям, находясь на SysNAND. В конце все ваши данные будут перенесены из EmuNAND в SysNAND с B9S.
-{: .notice--info}
-Обратите внимание, что можно увеличить изображения в этом руководстве кликая на них.
-{: .notice--info}
+Эта страница содержит инструкции по установке boot9strap на *не взломанную* 3DS или 2DS. Если у вас уже установлен arm9loaderhax, и вы хотите обновиться до boot9strap, следуйте инструкциям в разделе [с A9LH до B9S](a9lh-to-b9s).
+{: .notice--primary}
Перед началом, пользователям Windows необходимо включить отображение расширений файлов следуя [Расширения файлов (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ title: "Начало"
Прежде чем начать, рекомендуется проверить свою SD-карту на ошибки с помощью [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), или [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Обратите внимание, что новые методы [ntrboothax](installing-boot9strap-(ntrboothax)) и [hardmod](installing-boot9strap-(hardmod)) работают на *всех устройствах, регионах и версиях*! Это включает устройства CHN и TWN регионов, которые были ранее невзламываемыми!
-{: .notice--success}
-
{% capture notice-1 %}
Сообщается о волне банов, выданных Nintendo пользователям CFW. Чтобы защитить себя, выполните следующие шаги перед началом этого руководства:
diff --git a/_pages/ru_RU/godmode9-usage.txt b/_pages/ru_RU/godmode9-usage.txt
index 2016f1eee2..868dbf56c0 100644
--- a/_pages/ru_RU/godmode9-usage.txt
+++ b/_pages/ru_RU/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "Использование GodMode9"
---
GodMode9 это полноценный файловый менеджер для Nintendo 3DS, который дает вам доступ к SD-карте, FAT разделам внутри SysNAND или EmuNAND и просто ко всему остальному. Среди других его функций есть возможность копировать, удалять, переименовывать файлы и создавать папки.
-{: .notice--primary}
Обратите внимание, что если у вас имеются другие файлы помимо `GodMode9.firm` в папке `/luma/payloads/` на SD-карте, удержание кнопки (Start) при загрузке будет запускать "chainloader menu", где вам нужно будет использовать D-Pad и кнопку (A) для выбора "GodMode9" при выполнении этих инструкций.
-{: .notice--info}
{% capture notice %}
Это мощный инструмент, который даёт вам доступ к всевозможным модификациям системных данных 3DS. Однако, используются меры предосторожности, чтобы вы случайно не повредили системные данные консоли.
-
+
Система разрешений на запись защищает вас, показывая предупреждения и заставляя вводить комбинации кнопок для включения разрешений на запись. Невозможно перезаписать или модифицировать любые важные вещи без ввода таких комбинаций разблокировки, и также невозможно случайно разблокировать что-то. В любом случае, действуйте с умом, делайте бэкапы, чтобы обезопасить себя.
{% endcapture %}
diff --git a/_pages/ru_RU/h2testw-(windows).txt b/_pages/ru_RU/h2testw-(windows).txt
index a35bef867f..7ffc390ad2 100644
--- a/_pages/ru_RU/h2testw-(windows).txt
+++ b/_pages/ru_RU/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
Этот дополнительный раздел содержит информацию о проверке SD-карты на ошибки с помощью h2testw.
-{: .notice--info}
В зависимости от размера SD-карты и скорости компьютера этот процесс может занять до нескольких часов!
-{: .notice--info}
Этот раздел предназначен для пользователей Windows. Если у вас не Windows, воспользуйтесь [F3 (linux)](f3-(linux)) или [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Что понадобится
diff --git a/_pages/ru_RU/home.txt b/_pages/ru_RU/home.txt
index f561ed1590..ceeb3bd8ca 100644
--- a/_pages/ru_RU/home.txt
+++ b/_pages/ru_RU/home.txt
@@ -37,7 +37,7 @@ excerpt: "Полное руководство по прошивке 3DS,
**Кастомная прошивка** ("CFW", "кастом") позволяет использовать более продвинутые инструменты, чем простые homebrew. Например, можно устанавливать неподписанное ПО и запускать его прямо из меню HOME.
-Кастомную прошивку можно легко установить на любую приставку с версией прошивки 11.5.0 или ниже.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Что устанавливается в этом руководстве?
diff --git a/_pages/ru_RU/homebrew-launcher-(alternatives).txt b/_pages/ru_RU/homebrew-launcher-(alternatives).txt
index e41d614937..b2f2a61882 100644
--- a/_pages/ru_RU/homebrew-launcher-(alternatives).txt
+++ b/_pages/ru_RU/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Альтернативы)"
---
Homebrew Launcher имеет множество точек входа, или методов запуска.
-{: .notice--info}
Если вы не можете использовать browserhax (см. таблицу ниже), у вас нет одной из этих игр и другой 3DS с доступом к Homebrew Launcher, самый дешевый вариант это купить "Nintendo Selects" версию [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (убедитесь, что покупаете картридж своего региона) и [Powersaves](https://amzn.to/2fb3VY7) (совместим со всеми регионами), затем использовать oot3dhax из таблицы ниже.
-{: .notice--info}
Убедитесь, что Беспроводной режим (Wireless Communication) включен, так как udsploit (используется на следующей странице) потребует активный беспроводной модуль для своей работы, и некоторые консоли (New 3DS, New 2DS и Old 2DS) не могут включить Беспроводной режим, находясь в Homebrew Launcher. Достаточно включить Беспроводной режим (Wireless Communication); наличие соединения с точкой доступа не обязательно.
-{: .notice--info}
#### Что понадобится
diff --git a/_pages/ru_RU/homebrew-launcher-(soundhax).txt b/_pages/ru_RU/homebrew-launcher-(soundhax).txt
index e283eabb33..f077fbe2a9 100644
--- a/_pages/ru_RU/homebrew-launcher-(soundhax).txt
+++ b/_pages/ru_RU/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Homebrew Launcher имеет множество точек входа, или методов запуска.
-{: .notice--info}
Soundhax совместим с версиями прошивки от 9.0.0 до 11.3.0 в регионах EUR, JPN, KOR и USA.
-{: .notice--info}
Убедитесь, что Беспроводной режим (Wireless Communication) включен, так как udsploit (используется на следующей странице) потребует активный беспроводной модуль для своей работы, и некоторые консоли (New 3DS, New 2DS и Old 2DS) не могут включить Беспроводной режим, находясь в Homebrew Launcher. Достаточно включить Беспроводной режим (Wireless Communication); наличие соединения с точкой доступа не обязательно.
-{: .notice--info}
{% capture notice-1 %}
Заметьте, что обновление на картридже позволяет обновить только базовые функции консоли, такие как Системные настройки, меню HOME, и т. п. Приложение Звук Nintendo 3DS и сетевые функции, такие как Перенос системы, Интернет-браузер, Площадь StreetPass Mii или eShop с картриджа не обновляются.
-
+
Это означает, что обновление картриджем с версии, содержащей старое приложение Звук Nintendo 3DS *(<7.0.0 для Old 3DS регионов EUR, JPN, KOR, и USA)*, до версии с новым приложением Звук Nintendo 3DS сделает невозможной работу [Soundhax](homebrew-launcher-(soundhax))! Вам понадобится [альтернативный метод](homebrew-launcher-(alternatives)) запуска Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/ru_RU/installing-boot9strap-(browser).txt b/_pages/ru_RU/installing-boot9strap-(browser).txt
index 7ac089dc34..b2fc712337 100644
--- a/_pages/ru_RU/installing-boot9strap-(browser).txt
+++ b/_pages/ru_RU/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Установка boot9strap (Браузер)"
---
Если вы взламывали ваше устройство ранее и у вас установлена кастомная прошивка на основе EmuNAND, помните, что данное руководство работает только с SysNAND и вы должны выполнять вся шаги находясь в SysNAND. Помните, что RedNAND и EmuNAND - немного разные реализации [одного и того же](http://3dbrew.org/wiki/NAND_Redirection) (англ.).
-{: .notice--info}
#### Что понадобится
diff --git a/_pages/ru_RU/installing-boot9strap-(dsiware).txt b/_pages/ru_RU/installing-boot9strap-(dsiware).txt
index f621d4f87e..6eaf7f3a33 100644
--- a/_pages/ru_RU/installing-boot9strap-(dsiware).txt
+++ b/_pages/ru_RU/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Установка boot9strap (DSiWare)"
---
Существует два различных способа установки boot9strap с помощью DSiWare на 11.5.0.
-{: .notice--info}
Один из этих методов работает только с четырьмя конкретными играми, которые больше не продаются в eShop, в то время как другой работает с довольно большим количеством игр, которые по-прежнему продаются в eShop.
-{: .notice--info}
Оба этих метода требуют два устройства. На одной 3DS (или 2DS) должна быть установлена кастомная прошивка (такая как boot9strap или arm9loaderhax), и в дальнейшем она будет называется *исходная 3DS*, в то время как другая 3DS (или 2DS) должная быть на не взломанной прошивке 11.5.0, и в дальнейшем она будет называться *целевая 3DS*.
-{: .notice--info}
-
-Обе приставки ДОЛЖНЫ быть одного региона.
-{: .notice--warning}
Оба этих метода подразумевают что 3DS с кастомной прошивкой использует boot9strap или arm9loaderhax и была взломана по этому руководству. Хотя эти методы и совместимы с другими кастомными прошивками, это выходит за рамки данного руководства.
-{: .notice--info}
Оба этих метода используют "FIRM partitions known-plaintext" exploit описаный [здесь](https://www.3dbrew.org/wiki/3DS_System_Flaws) (англ.), и уязвимость, позволяющую DSiWare тайтлам читать и записывать что угодно в зашифрованном NAND.
-{: .notice--info}
-{% capture notice-4 %}
Оба этих метода требуют от вас произвести Передачу данных системы ([System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/)) из приставки с кастомной прошивкой на приставку со стоковой прошивкой. Перенос данных будет работать *только* в одном из следующих направлений:
+ New 3DS или New 2DS -> New 3DS или New 2DS
+ Old 3DS или Old 2DS -> Old 3DS или Old 2DS
- + Old 3DS или Old 2DS -> New 3DS или New 2DS
-{% endcapture %}
+ + Old 3DS или Old 2DS -> New 3DS или New 2DS
-{{ notice-4 | markdownify }}
+Обе приставки ДОЛЖНЫ быть одного региона.
+{: .notice--warning}
-В обоих этих методах NNID из исходной 3DS будет находится в целевой 3DS до тех пор, пока вы не перенесете его назад в исходную консоль, либо не позвоните в Nintendo! (подробную информацию можно найти в инструкциях)
-{: .notice--danger}
-
-Перенос системы можно делать лишь раз в неделю для одного NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Перенос системы можно делать лишь раз в неделю для одного NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Установка boot9strap (Инъекция в сохранения DSiWare)](installing-boot9strap-(dsiware-save-injection))
-
+
Этот метод требует, чтобы на исходной 3DS была установлена легальная копия одной из следующих игр:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ ___
{% capture notice-1 %}
[Установка boot9strap (Инъекция в игры DSiWare)](installing-boot9strap-(dsiware-game-injection))
-
+
Этот метод требует, чтобы на исходной 3DS была установлена легальная копия игры, присутствующая в списке на странице [Установка boot9strap (Список уязвимых игр DSiWare)](installing-boot9strap-(dsiware-game-injection-list)).
-
+
Пиратская копия игры *не* будет работать.
{% endcapture %}
diff --git a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt
index 0b57e8f3f4..059f34e6d0 100644
--- a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Установка boot9strap (Инъекция в игры DSiWare)"
---
Обратите внимание, что если у вас имеются другие файлы помимо `GodMode9.firm` в папке `/luma/payloads/` на SD-карте, удержание кнопки (Start) при загрузке будет запускать "chainloader menu", где вам нужно будет использовать D-Pad и кнопку (A) для выбора "GodMode9" при выполнении этих инструкций.
-{: .notice--info}
Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Прежде чем продолжить, убедитесь, вы прочитали все уведомления и предупреждения в [Установка boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+Если вы не будете использовать корректный `.firm`, соответствующий целевой 3DS, вы получите БРИК! Убедитесь что скачали и используете правильный!
{: .notice--danger}
#### Что понадобится
-* Две консоли
- + **Исходная 3DS**: 3DS с кастомной прошивкой (boot9strap или arm9loaderhax) *с последней версией системного ПО*
- + **Целевая 3DS**: 3DS с официальной прошивкой *11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Купленная (или уже имеющаяся) совместимая DSiWare-игра из eShop на **исходной 3DS**
+ Пиратская копия игры **НЕ** будет работать
+ Для списка совместимых игр обратитесь к [Установка boot9strap (Список уязвимых игр DSiWare)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection-list).txt
index 7a9a51caa1..be2c7b89ea 100644
--- a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Установка boot9strap (Список уязвимых игр DSiW
---
Это автоматически создаваемый список всех игр, совместимых с [Установка boot9strap (DSiWare)](installing-boot9strap-(dsiware)).
-{: .notice--primary}
-Список отсортирован по регионам в следующем порядке: USA, EUR, JPN.
-{: .notice--info}
-
-Каждая часть отсортирована по возрастанию цены.
-{: .notice--info}
+Список отсортирован по регионам в следующем порядке: USA, EUR, JPN. Каждая часть отсортирована по возрастанию цены.
QR-коды можно отсканировать, нажав (L + R) на домашнем экране и выбрав иконку QR на нижнем экране приставки.
-{: .notice--info}
-Требования необходимого размера связаны с условием, что измененная игра и ее сохранение не должны измениться в размере, иначе Перенос данных не пройдет корректно, означая, что донорская DSiWare-игра должна быть достаточно большой, чтобы вместить взломанную DSiWare-игру.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt b/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt
index 743dd39d84..0ab08fe318 100644
--- a/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Установка boot9strap (Инъекция в сохранения
---
Обратите внимание, что если у вас имеются другие файлы помимо `GodMode9.firm` в папке `/luma/payloads/` на SD-карте, удержание кнопки (Start) при загрузке будет запускать "chainloader menu", где вам нужно будет использовать D-Pad и кнопку (A) для выбора "GodMode9" при выполнении этих инструкций.
-{: .notice--info}
Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Прежде чем продолжить, убедитесь, вы прочитали все уведомления и предупреждения в [Установка boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
Если вы не будете использовать корректный `.firm`, соответствующий целевой 3DS, вы получите БРИК! Убедитесь что скачали и используете правильный!
{: .notice--danger}
#### Что понадобится
-* Две консоли
- + **Исходная 3DS**: 3DS с кастомной прошивкой (boot9strap или arm9loaderhax) *с последней версией системного ПО*
- + **Целевая 3DS**: 3DS с официальной прошивкой *11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Купленная DSiWare игра из списка ниже (пиратская копия **не** будет работать) на **исходной 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/ru_RU/installing-boot9strap-(hardmod).txt b/_pages/ru_RU/installing-boot9strap-(hardmod).txt
index 02456a3100..7c5088997d 100644
--- a/_pages/ru_RU/installing-boot9strap-(hardmod).txt
+++ b/_pages/ru_RU/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Установка boot9strap (Hardmod)"
---
Отличное руководство по пайке хардмода находится [здесь](https://gbatemp.net/threads/414498/) (англ.). Если у вас New 3DS, прочтите [это](https://github.com/Plailect/Guide/issues/681) и [это](https://github.com/Plailect/Guide/issues/1185) перед тем, как начать.
-{: .notice--info}
Это рабочая реализация "FIRM partitions known-plaintext"-эксплойта. Подробнее о нем [здесь](https://www.3dbrew.org/wiki/3DS_System_Flaws) (англ.).
-{: .notice--info}
Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Этот метод совместим со всеми устройствами (New 3DS, New 2DS, Old 3DS и Old 2DS) *всех* версий, для которых у вас есть соответствующий `.firm`.
-{: .notice--success}
#### Что понадобится
diff --git a/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt b/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt
index 3fbe117fd9..911a31040d 100644
--- a/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Установка boot9strap (Homebrew Launcher)"
---
Если вы взламывали ваше устройство ранее и у вас установлена кастомная прошивка на основе EmuNAND, помните, что данное руководство работает только с SysNAND и вы должны выполнять вся шаги находясь в SysNAND. Помните, что RedNAND и EmuNAND - немного разные реализации [одного и того же](http://3dbrew.org/wiki/NAND_Redirection) (англ.).
-{: .notice--info}
#### Инструкция
@@ -20,6 +19,8 @@ title: "Установка boot9strap (Homebrew Launcher)"
+ Если "PM INIT FAILED" *всё ещё* появляется, попробуйте использовать [safehax версии r19](https://github.com/TiniVi/safehax/releases/tag/r19)
+ При зависании отключите питание консоли, зажав кнопку питания, и попробуйте снова
1. Если эксплойт сработал, запустится SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Часть II - Установка boot9strap
diff --git a/_pages/ru_RU/installing-boot9strap-(mset).txt b/_pages/ru_RU/installing-boot9strap-(mset).txt
index 9b77f406e3..e782c5a75f 100644
--- a/_pages/ru_RU/installing-boot9strap-(mset).txt
+++ b/_pages/ru_RU/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Установка boot9strap (MSET)"
---
Если вы взламывали ваше устройство ранее и у вас установлена кастомная прошивка на основе EmuNAND, помните, что данное руководство работает только с SysNAND и вы должны выполнять вся шаги находясь в SysNAND. Помните, что RedNAND и EmuNAND - немного разные реализации [одного и того же](http://3dbrew.org/wiki/NAND_Redirection) (англ.).
-{: .notice--info}
#### Что понадобится
diff --git a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..4520c2ae02
--- /dev/null
+++ b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Что понадобится
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
+* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
+* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Инструкция
+
+##### Часть I - Подготовительные работы
+
+1. Выключите консоль
+1. Вставьте SD-карту в компьютер
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Скопируйте _содержимое_ `starter.zip` в корень вашей SD-карты
+1. Создайте папку `boot9strap` в корне SD-карты
+1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты
+
+ 
+ {: .notice--info}
+
+1. Вставьте SD-карту обратно в консоль
+1. Включите консоль
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Выключите консоль
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. Если эксплойт сработал, запустится SafeB9SInstaller
+
+##### Часть III - Установка boot9strap
+
+1. Дождитесь окончания всех проверок безопасности
+1. При появлении запроса, введите указанную комбинацию кнопок для установки boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Часть IV - Настройка Luma3DS
+
+1. Вставьте SD-карту в компьютер
+1. Delete `boot.firm` from the root of your SD card
+1. Скопируйте файл `boot.firm` из `.7z-архива` Luma3DS в корень SD-карты
+1. Вставьте SD-карту обратно в консоль
+1. Включите консоль
+1. Ваша консоль должна загрузиться в меню конфигурации Luma3DS
+ + Если экран остаётся чёрным, то перейдите к разделу [проблемы и их решения](troubleshooting#ts_sys_b9s)
+1. Нажимая (A) выберите следующие пункты:
+ + **"Show NAND or user string in System Settings"**
+1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
+ + Если появляется ошибка, просто переходите к следующей странице
+
+___
+
+Следующий шаг: [Завершение установки](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Дождитесь окончания проверки
+1. Нажмите (B) для возврата в главное меню
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/ru_RU/move-emunand.txt b/_pages/ru_RU/move-emunand.txt
index e941f75e29..5276638939 100644
--- a/_pages/ru_RU/move-emunand.txt
+++ b/_pages/ru_RU/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Перенос EmuNAND"
---
Этот дополнительный раздел содержит информацию о переносе содержимого EmuNAND в новый SysNAND с кастомной прошивкой, с последующим удалением раздела, содержащего EmuNAND. Помните, что RedNAND и EmuNAND - немного разные реализации [одного и того же](http://3dbrew.org/wiki/NAND_Redirection) (англ.).
-{: .notice--info}
-Обратите внимание, что если у вас имеются другие файлы помимо `GodMode9.firm` в папке `/luma/payloads/` на SD-карте, удержание кнопки (Start) при загрузке будет запускать "chainloader menu", где вам нужно будет использовать D-Pad и кнопку (A) для выбора "GodMode9" при выполнении этих инструкций.
-{: .notice--info}
+Обратите внимание, что если у вас имеются другие файлы помимо `GodMode9.firm` в папке `/luma/payloads/` на SD-карте, удержание кнопки (Start) при загрузке будет запускать "chainloader menu", где вам нужно будет использовать D-Pad и кнопку (A) для выбора "GodMode9" при выполнении этих инструкций.
**Для продолжения, у вас уже ДОЛЖНА быть установлена Luma3DS и boot9strap или arm9loaderhax**
{: .notice--danger}
diff --git a/_pages/ru_RU/ntr-and-cubic-ninja.txt b/_pages/ru_RU/ntr-and-cubic-ninja.txt
index 1a711e8c46..5409a466a4 100644
--- a/_pages/ru_RU/ntr-and-cubic-ninja.txt
+++ b/_pages/ru_RU/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR и Cubic Ninja"
---
Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**Этот метод работает ТОЛЬКО на японских New 3DS!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Что понадобится
diff --git a/_pages/ru_RU/ntrboot.txt b/_pages/ru_RU/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/ru_RU/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/ru_RU/region-changing.txt b/_pages/ru_RU/region-changing.txt
index a91a25d440..a755615e35 100644
--- a/_pages/ru_RU/region-changing.txt
+++ b/_pages/ru_RU/region-changing.txt
@@ -3,16 +3,12 @@ title: "Смена региона"
---
Этот дополнительный раздел рассказывает о смене региона на вашей приставке с кастомной прошивкой (CFW SysNAND). Это делается путем установки образа 9.2.0 CTRTransfer того региона, на который вы хотите перейти.
-{: .notice--primary}
-**Смена региона абсолютно не обязательна с тех пор, как в Luma3DS поддерживает запуск игр других регионов и индивидуальную [эмуляцию региона для отдельных игр](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) (англ.).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Обратите внимание, что если у вас имеются другие файлы помимо `GodMode9.firm` в папке `/luma/payloads/` на SD-карте, удержание кнопки (Start) при загрузке будет запускать "chainloader menu", где вам нужно будет использовать D-Pad и кнопку (A) для выбора "GodMode9" при выполнении этих инструкций.
-{: .notice--info}
Этот процесс отсоединит NNID от приставки, поскольку он больше не будет совместим с вашей консолью. NNID привязан к конкретному устройству и к его региону, поэтому перенос NNID между приставками с разными регионами невозможен без применения [крайне сложных операций](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ title: "Смена региона"
После этого только **New 3DS, которая никогда до этого не была привязана к eShop** и **любая Old 3DS** смогут подключиться к eShop и использовать все его возможности уже в новом регионе. New 3DS, которые сменили регион и уже подключались к eShop на оригинальном регионе, не смогут создать новый NNID и подключаться к eShop с новым регионом!
{: .notice--warning}
-Заметьте, что иногда eShop не работает там, где он, казалось бы, должен работать. Такое поведение объясняется особенностями работы серверов Nintendo, и я не могу на них повлиять.
-{: .notice--warning}
-
-Как и в случае выше, иногда eShop работает там, где не должен (например на некоторых New 3DS). Причины на данный момент неизвестны.
-{: .notice--warning}
+Заметьте, что иногда eShop не работает там, где он, казалось бы, должен работать. Такое поведение объясняется особенностями работы серверов Nintendo, и я не могу на них повлиять. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Причины на данный момент неизвестны.
Смена региона при помощи CTRTransfer (что используется в этом методе) по какой-то причине ломает reboot-патч. Причина этого неизвестна, но из-за этого владельцы Old 3DS теряют возможность играть в игры, требующие режим расширенной оперативной памяти (например, Monster Hunter, Super Smash Bros, и Pokémon Sun / Moon) до тех пор, пока не выполнят форматирование устройства.
-{: .notice--warning}
-Никогда не форматируйте New 2DS на прошивках ниже 11.4.0, иначе вы не сможете закончить первоначальную настройку!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**Для продолжения, у вас уже ДОЛЖНА быть установлена Luma3DS и boot9strap или arm9loaderhax**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Что понадобится
diff --git a/_pages/ru_RU/site-navigation.txt b/_pages/ru_RU/site-navigation.txt
index 1fb028095c..97f6ee28b4 100644
--- a/_pages/ru_RU/site-navigation.txt
+++ b/_pages/ru_RU/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [Расширения файлов (Windows)](file-extensions-(windows))
+ [Завершение установки](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Начало (New 3DS)](get-started-(new-3ds))
+ [Начало (Old 3DS)](get-started-(old-3ds))
+ [Начало](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Установка boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Установка boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Установка boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Установка boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Перенос EmuNAND](move-emunand)
+ [NTR и Cubic Ninja](ntr-and-cubic-ninja)
+ [Смена региона](region-changing)
diff --git a/_pages/ru_RU/troubleshooting.txt b/_pages/ru_RU/troubleshooting.txt
index 3acb30c2d7..39102cf543 100644
--- a/_pages/ru_RU/troubleshooting.txt
+++ b/_pages/ru_RU/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Проблемы и их решения"
Если ваша консоль не загружается, найдите раздел, соответствующий вашей проблеме, и следуйте его инструкциям. После решения возникшей проблемы, вернитесь к основному руководству
(Этот раздел весьма обширный, воспользуйтесь Ctrl+F для поиска своей проблемы)
-{: .notice--primary}
-**Если решения вашей проблемы здесь не оказалось, то загрузите содержимое всех .log файлов из корня SD-карты на [Gist](https://gist.github.com/), а затем обращайтесь за помощью, детально описав проблему и испробованные способы решения.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS игры не работают после завершения руководства
diff --git a/_pages/ru_RU/uninstall-cfw.txt b/_pages/ru_RU/uninstall-cfw.txt
index c30ba40141..ab25d6aeea 100644
--- a/_pages/ru_RU/uninstall-cfw.txt
+++ b/_pages/ru_RU/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Удаление кастомной прошивки"
---
Эта инструкция служит для полного удаления кастомной прошивки с вашего устройства, включая Boot9Strap и Luma3DS, в целях восстановления оригинального состояния консоли.
-{: .notice--danger}
Любые неподписанные (нелегальные) игры перестанут работать и могут быть удалены вручную с помощью раздела Управление данными (Data Management) в Системных настройках (System Settings). Используйте [JK's Save Manager](https://github.com/J-D-K/JKSM/releases/latest) чтобы создать резервные копии любых важных для вас сохранений этих неподписанных (нелегальных) игр.
-{: .notice--info}
Это не повлияет на ваш NNID, любые законно приобретенные игры или сохранения этих законно приобретенных игр.
-{: .notice--info}
Обратите внимание, что если у вас имеются другие файлы помимо `GodMode9.firm` в папке `/luma/payloads/` на SD-карте, удержание кнопки (Start) при загрузке будет запускать "chainloader menu", где вам нужно будет использовать D-Pad и кнопку (A) для выбора "GodMode9" при выполнении этих инструкций.
-{: .notice--info}
#### Что понадобится
diff --git a/_pages/ru_RU/updating-b9s.txt b/_pages/ru_RU/updating-b9s.txt
index 62aca90d36..8687c229b8 100644
--- a/_pages/ru_RU/updating-b9s.txt
+++ b/_pages/ru_RU/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Обновление B9S"
---
Эта страница предназначена для пользователей boot9strap, чтобы они могли обновить установленный boot9strap до последней версии.
-{: .notice--info}
Обратите внимание, что последний релиз Luma3DS *не* совместим с boot9strap версии 1.0. Вам *требуется* обновить установленный boot9strap до версии 1.2, следуя инструкциям на этой странице.
-{: .notice--warning}
{% capture notice-1 %}
Сообщается о волне банов, выданных Nintendo пользователям CFW. Чтобы защитить себя, выполните следующие шаги перед началом этого руководства:
diff --git a/_pages/sr_SP/9.2.0-ctrtransfer.txt b/_pages/sr_SP/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/sr_SP/9.2.0-ctrtransfer.txt
+++ b/_pages/sr_SP/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/sr_SP/a9lh-to-b9s.txt b/_pages/sr_SP/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/sr_SP/a9lh-to-b9s.txt
+++ b/_pages/sr_SP/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/sr_SP/cart-update.txt b/_pages/sr_SP/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/sr_SP/cart-update.txt
+++ b/_pages/sr_SP/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/sr_SP/credits.txt b/_pages/sr_SP/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/sr_SP/credits.txt
+++ b/_pages/sr_SP/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/sr_SP/f3-(linux).txt b/_pages/sr_SP/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/sr_SP/f3-(linux).txt
+++ b/_pages/sr_SP/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/sr_SP/f3x-(mac).txt b/_pages/sr_SP/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/sr_SP/f3x-(mac).txt
+++ b/_pages/sr_SP/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/sr_SP/faq.txt b/_pages/sr_SP/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/sr_SP/faq.txt
+++ b/_pages/sr_SP/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/sr_SP/file-extensions-(windows).txt b/_pages/sr_SP/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/sr_SP/file-extensions-(windows).txt
+++ b/_pages/sr_SP/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/sr_SP/finalizing-setup.txt b/_pages/sr_SP/finalizing-setup.txt
index f959c138cf..e462ce4bfe 100644
--- a/_pages/sr_SP/finalizing-setup.txt
+++ b/_pages/sr_SP/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Overview of steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/sr_SP/flashing-ntrboot-(custom-firmware).txt b/_pages/sr_SP/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/sr_SP/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/sr_SP/flashing-ntrboot-(powersaves).txt b/_pages/sr_SP/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/sr_SP/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/sr_SP/get-started-(new-3ds).txt b/_pages/sr_SP/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/sr_SP/get-started-(new-3ds).txt
+++ b/_pages/sr_SP/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/sr_SP/get-started-(old-3ds).txt b/_pages/sr_SP/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/sr_SP/get-started-(old-3ds).txt
+++ b/_pages/sr_SP/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/sr_SP/get-started.txt b/_pages/sr_SP/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/sr_SP/get-started.txt
+++ b/_pages/sr_SP/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/sr_SP/godmode9-usage.txt b/_pages/sr_SP/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/sr_SP/godmode9-usage.txt
+++ b/_pages/sr_SP/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/sr_SP/h2testw-(windows).txt b/_pages/sr_SP/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/sr_SP/h2testw-(windows).txt
+++ b/_pages/sr_SP/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/sr_SP/home.txt b/_pages/sr_SP/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/sr_SP/home.txt
+++ b/_pages/sr_SP/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/sr_SP/homebrew-launcher-(alternatives).txt b/_pages/sr_SP/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/sr_SP/homebrew-launcher-(alternatives).txt
+++ b/_pages/sr_SP/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/sr_SP/homebrew-launcher-(soundhax).txt b/_pages/sr_SP/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/sr_SP/homebrew-launcher-(soundhax).txt
+++ b/_pages/sr_SP/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/sr_SP/installing-boot9strap-(browser).txt b/_pages/sr_SP/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/sr_SP/installing-boot9strap-(browser).txt
+++ b/_pages/sr_SP/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/sr_SP/installing-boot9strap-(dsiware).txt b/_pages/sr_SP/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/sr_SP/installing-boot9strap-(dsiware).txt
+++ b/_pages/sr_SP/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/sr_SP/installing-boot9strap-(dsiware-game-injection).txt b/_pages/sr_SP/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/sr_SP/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/sr_SP/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/sr_SP/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/sr_SP/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/sr_SP/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/sr_SP/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/sr_SP/installing-boot9strap-(dsiware-save-injection).txt b/_pages/sr_SP/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/sr_SP/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/sr_SP/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/sr_SP/installing-boot9strap-(hardmod).txt b/_pages/sr_SP/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/sr_SP/installing-boot9strap-(hardmod).txt
+++ b/_pages/sr_SP/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/sr_SP/installing-boot9strap-(homebrew-launcher).txt b/_pages/sr_SP/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/sr_SP/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/sr_SP/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/sr_SP/installing-boot9strap-(mset).txt b/_pages/sr_SP/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/sr_SP/installing-boot9strap-(mset).txt
+++ b/_pages/sr_SP/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/sr_SP/installing-boot9strap-(ntrboot).txt b/_pages/sr_SP/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/sr_SP/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/sr_SP/move-emunand.txt b/_pages/sr_SP/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/sr_SP/move-emunand.txt
+++ b/_pages/sr_SP/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/sr_SP/ntr-and-cubic-ninja.txt b/_pages/sr_SP/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/sr_SP/ntr-and-cubic-ninja.txt
+++ b/_pages/sr_SP/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/sr_SP/ntrboot.txt b/_pages/sr_SP/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/sr_SP/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/sr_SP/region-changing.txt b/_pages/sr_SP/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/sr_SP/region-changing.txt
+++ b/_pages/sr_SP/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/sr_SP/site-navigation.txt b/_pages/sr_SP/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/sr_SP/site-navigation.txt
+++ b/_pages/sr_SP/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/sr_SP/troubleshooting.txt b/_pages/sr_SP/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/sr_SP/troubleshooting.txt
+++ b/_pages/sr_SP/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/sr_SP/uninstall-cfw.txt b/_pages/sr_SP/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/sr_SP/uninstall-cfw.txt
+++ b/_pages/sr_SP/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/sr_SP/updating-b9s.txt b/_pages/sr_SP/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/sr_SP/updating-b9s.txt
+++ b/_pages/sr_SP/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/sv_SE/9.2.0-ctrtransfer.txt b/_pages/sv_SE/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/sv_SE/9.2.0-ctrtransfer.txt
+++ b/_pages/sv_SE/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/sv_SE/a9lh-to-b9s.txt b/_pages/sv_SE/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/sv_SE/a9lh-to-b9s.txt
+++ b/_pages/sv_SE/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/sv_SE/cart-update.txt b/_pages/sv_SE/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/sv_SE/cart-update.txt
+++ b/_pages/sv_SE/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/sv_SE/credits.txt b/_pages/sv_SE/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/sv_SE/credits.txt
+++ b/_pages/sv_SE/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/sv_SE/f3-(linux).txt b/_pages/sv_SE/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/sv_SE/f3-(linux).txt
+++ b/_pages/sv_SE/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/sv_SE/f3x-(mac).txt b/_pages/sv_SE/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/sv_SE/f3x-(mac).txt
+++ b/_pages/sv_SE/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/sv_SE/faq.txt b/_pages/sv_SE/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/sv_SE/faq.txt
+++ b/_pages/sv_SE/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/sv_SE/file-extensions-(windows).txt b/_pages/sv_SE/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/sv_SE/file-extensions-(windows).txt
+++ b/_pages/sv_SE/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/sv_SE/finalizing-setup.txt b/_pages/sv_SE/finalizing-setup.txt
index f959c138cf..e462ce4bfe 100644
--- a/_pages/sv_SE/finalizing-setup.txt
+++ b/_pages/sv_SE/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Overview of steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/sv_SE/flashing-ntrboot-(custom-firmware).txt b/_pages/sv_SE/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/sv_SE/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/sv_SE/flashing-ntrboot-(powersaves).txt b/_pages/sv_SE/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/sv_SE/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/sv_SE/get-started-(new-3ds).txt b/_pages/sv_SE/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/sv_SE/get-started-(new-3ds).txt
+++ b/_pages/sv_SE/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/sv_SE/get-started-(old-3ds).txt b/_pages/sv_SE/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/sv_SE/get-started-(old-3ds).txt
+++ b/_pages/sv_SE/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/sv_SE/get-started.txt b/_pages/sv_SE/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/sv_SE/get-started.txt
+++ b/_pages/sv_SE/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/sv_SE/godmode9-usage.txt b/_pages/sv_SE/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/sv_SE/godmode9-usage.txt
+++ b/_pages/sv_SE/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/sv_SE/h2testw-(windows).txt b/_pages/sv_SE/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/sv_SE/h2testw-(windows).txt
+++ b/_pages/sv_SE/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/sv_SE/home.txt b/_pages/sv_SE/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/sv_SE/home.txt
+++ b/_pages/sv_SE/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/sv_SE/homebrew-launcher-(alternatives).txt b/_pages/sv_SE/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/sv_SE/homebrew-launcher-(alternatives).txt
+++ b/_pages/sv_SE/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/sv_SE/homebrew-launcher-(soundhax).txt b/_pages/sv_SE/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/sv_SE/homebrew-launcher-(soundhax).txt
+++ b/_pages/sv_SE/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/sv_SE/installing-boot9strap-(browser).txt b/_pages/sv_SE/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/sv_SE/installing-boot9strap-(browser).txt
+++ b/_pages/sv_SE/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/sv_SE/installing-boot9strap-(dsiware).txt b/_pages/sv_SE/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/sv_SE/installing-boot9strap-(dsiware).txt
+++ b/_pages/sv_SE/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/sv_SE/installing-boot9strap-(dsiware-game-injection).txt b/_pages/sv_SE/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/sv_SE/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/sv_SE/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/sv_SE/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/sv_SE/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/sv_SE/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/sv_SE/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/sv_SE/installing-boot9strap-(dsiware-save-injection).txt b/_pages/sv_SE/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/sv_SE/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/sv_SE/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/sv_SE/installing-boot9strap-(hardmod).txt b/_pages/sv_SE/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/sv_SE/installing-boot9strap-(hardmod).txt
+++ b/_pages/sv_SE/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/sv_SE/installing-boot9strap-(homebrew-launcher).txt b/_pages/sv_SE/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/sv_SE/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/sv_SE/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/sv_SE/installing-boot9strap-(mset).txt b/_pages/sv_SE/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/sv_SE/installing-boot9strap-(mset).txt
+++ b/_pages/sv_SE/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/sv_SE/move-emunand.txt b/_pages/sv_SE/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/sv_SE/move-emunand.txt
+++ b/_pages/sv_SE/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/sv_SE/ntr-and-cubic-ninja.txt b/_pages/sv_SE/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/sv_SE/ntr-and-cubic-ninja.txt
+++ b/_pages/sv_SE/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/sv_SE/ntrboot.txt b/_pages/sv_SE/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/sv_SE/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/sv_SE/region-changing.txt b/_pages/sv_SE/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/sv_SE/region-changing.txt
+++ b/_pages/sv_SE/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/sv_SE/site-navigation.txt b/_pages/sv_SE/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/sv_SE/site-navigation.txt
+++ b/_pages/sv_SE/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/sv_SE/troubleshooting.txt b/_pages/sv_SE/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/sv_SE/troubleshooting.txt
+++ b/_pages/sv_SE/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/sv_SE/uninstall-cfw.txt b/_pages/sv_SE/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/sv_SE/uninstall-cfw.txt
+++ b/_pages/sv_SE/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/sv_SE/updating-b9s.txt b/_pages/sv_SE/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/sv_SE/updating-b9s.txt
+++ b/_pages/sv_SE/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/th_TH/9.2.0-ctrtransfer.txt b/_pages/th_TH/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/th_TH/9.2.0-ctrtransfer.txt
+++ b/_pages/th_TH/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/th_TH/a9lh-to-b9s.txt b/_pages/th_TH/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/th_TH/a9lh-to-b9s.txt
+++ b/_pages/th_TH/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/th_TH/cart-update.txt b/_pages/th_TH/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/th_TH/cart-update.txt
+++ b/_pages/th_TH/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/th_TH/credits.txt b/_pages/th_TH/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/th_TH/credits.txt
+++ b/_pages/th_TH/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/th_TH/f3-(linux).txt b/_pages/th_TH/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/th_TH/f3-(linux).txt
+++ b/_pages/th_TH/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/th_TH/f3x-(mac).txt b/_pages/th_TH/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/th_TH/f3x-(mac).txt
+++ b/_pages/th_TH/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/th_TH/faq.txt b/_pages/th_TH/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/th_TH/faq.txt
+++ b/_pages/th_TH/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/th_TH/file-extensions-(windows).txt b/_pages/th_TH/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/th_TH/file-extensions-(windows).txt
+++ b/_pages/th_TH/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/th_TH/finalizing-setup.txt b/_pages/th_TH/finalizing-setup.txt
index f959c138cf..e462ce4bfe 100644
--- a/_pages/th_TH/finalizing-setup.txt
+++ b/_pages/th_TH/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Overview of steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/th_TH/flashing-ntrboot-(custom-firmware).txt b/_pages/th_TH/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/th_TH/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/th_TH/flashing-ntrboot-(powersaves).txt b/_pages/th_TH/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/th_TH/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/th_TH/get-started-(new-3ds).txt b/_pages/th_TH/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/th_TH/get-started-(new-3ds).txt
+++ b/_pages/th_TH/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/th_TH/get-started-(old-3ds).txt b/_pages/th_TH/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/th_TH/get-started-(old-3ds).txt
+++ b/_pages/th_TH/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/th_TH/get-started.txt b/_pages/th_TH/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/th_TH/get-started.txt
+++ b/_pages/th_TH/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/th_TH/godmode9-usage.txt b/_pages/th_TH/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/th_TH/godmode9-usage.txt
+++ b/_pages/th_TH/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/th_TH/h2testw-(windows).txt b/_pages/th_TH/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/th_TH/h2testw-(windows).txt
+++ b/_pages/th_TH/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/th_TH/home.txt b/_pages/th_TH/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/th_TH/home.txt
+++ b/_pages/th_TH/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/th_TH/homebrew-launcher-(alternatives).txt b/_pages/th_TH/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/th_TH/homebrew-launcher-(alternatives).txt
+++ b/_pages/th_TH/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/th_TH/homebrew-launcher-(soundhax).txt b/_pages/th_TH/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/th_TH/homebrew-launcher-(soundhax).txt
+++ b/_pages/th_TH/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/th_TH/installing-boot9strap-(browser).txt b/_pages/th_TH/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/th_TH/installing-boot9strap-(browser).txt
+++ b/_pages/th_TH/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/th_TH/installing-boot9strap-(dsiware).txt b/_pages/th_TH/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/th_TH/installing-boot9strap-(dsiware).txt
+++ b/_pages/th_TH/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/th_TH/installing-boot9strap-(dsiware-game-injection).txt b/_pages/th_TH/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/th_TH/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/th_TH/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/th_TH/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/th_TH/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/th_TH/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/th_TH/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/th_TH/installing-boot9strap-(dsiware-save-injection).txt b/_pages/th_TH/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/th_TH/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/th_TH/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/th_TH/installing-boot9strap-(hardmod).txt b/_pages/th_TH/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/th_TH/installing-boot9strap-(hardmod).txt
+++ b/_pages/th_TH/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/th_TH/installing-boot9strap-(homebrew-launcher).txt b/_pages/th_TH/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/th_TH/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/th_TH/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/th_TH/installing-boot9strap-(mset).txt b/_pages/th_TH/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/th_TH/installing-boot9strap-(mset).txt
+++ b/_pages/th_TH/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/th_TH/installing-boot9strap-(ntrboot).txt b/_pages/th_TH/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/th_TH/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/th_TH/move-emunand.txt b/_pages/th_TH/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/th_TH/move-emunand.txt
+++ b/_pages/th_TH/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/th_TH/ntr-and-cubic-ninja.txt b/_pages/th_TH/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/th_TH/ntr-and-cubic-ninja.txt
+++ b/_pages/th_TH/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/th_TH/ntrboot.txt b/_pages/th_TH/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/th_TH/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/th_TH/region-changing.txt b/_pages/th_TH/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/th_TH/region-changing.txt
+++ b/_pages/th_TH/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/th_TH/site-navigation.txt b/_pages/th_TH/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/th_TH/site-navigation.txt
+++ b/_pages/th_TH/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/th_TH/troubleshooting.txt b/_pages/th_TH/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/th_TH/troubleshooting.txt
+++ b/_pages/th_TH/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/th_TH/uninstall-cfw.txt b/_pages/th_TH/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/th_TH/uninstall-cfw.txt
+++ b/_pages/th_TH/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/th_TH/updating-b9s.txt b/_pages/th_TH/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/th_TH/updating-b9s.txt
+++ b/_pages/th_TH/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/tr_TR/9.2.0-ctrtransfer.txt b/_pages/tr_TR/9.2.0-ctrtransfer.txt
index 4d4f6046e6..6e6b307e9d 100644
--- a/_pages/tr_TR/9.2.0-ctrtransfer.txt
+++ b/_pages/tr_TR/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
Bu rehberi kullanmak için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) linkleri açabilen bir torrent programına ihtiyaç duyulacaktır. **
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/tr_TR/a9lh-to-b9s.txt b/_pages/tr_TR/a9lh-to-b9s.txt
index 2599e42a39..09664a3aaa 100644
--- a/_pages/tr_TR/a9lh-to-b9s.txt
+++ b/_pages/tr_TR/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+Bu rehberi kullanmak için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) linkleri açabilen bir torrent programına ihtiyaç duyulacaktır. **
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-Bu rehberi kullanmak için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) linkleri açabilen bir torrent programına ihtiyaç duyulacaktır. **
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/tr_TR/cart-update.txt b/_pages/tr_TR/cart-update.txt
index 328902d026..5083b02f3b 100644
--- a/_pages/tr_TR/cart-update.txt
+++ b/_pages/tr_TR/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
Her oyun kartuşu içinde daha düşük versiyondaki cihazları güncellenmesine olanak veren (internet olmasa bile) ve oynayabilmek için gerekli sistem versiyonunu içerir.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! Homebrew'ı çalıştırmak için [alternatif bir yöntem](homebrew-launcher-(alternatives)) gerekir!
+
+Bu demektir ki kartuş güncellemesi eğer sizde hali hazırda mevcut ise tarayıcı YÜKLEMEZ. Bu **sadece** var olan sistem versiyonunu günceller *(örneğin, 2.1.0-0 -> 6.0.0-0)*. Son numara *(-0)* **değişmez**.
{% endcapture %}
{{ notice-1 | markdownify }}
-Bu demektir ki kartuş güncellemesi eğer sizde hali hazırda mevcut ise tarayıcı YÜKLEMEZ. Bu **sadece** var olan sistem versiyonunu günceller *(örneğin, 2.1.0-0 -> 6.0.0-0)*. Son numara *(-0)* **değişmez**.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/tr_TR/credits.txt b/_pages/tr_TR/credits.txt
index 8a5326a8ef..426c9d57fe 100644
--- a/_pages/tr_TR/credits.txt
+++ b/_pages/tr_TR/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
Eğer isminizi unuttuysam, benimle iletişime geçin ve isminiyi ekleyeyim.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/tr_TR/f3-(linux).txt b/_pages/tr_TR/f3-(linux).txt
index 08f8bd6c5e..d99679ec32 100644
--- a/_pages/tr_TR/f3-(linux).txt
+++ b/_pages/tr_TR/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
SD kartınızın boyutuna ve bilgisayarınıza bağlı olarak bu işlem bir kaç saat sürebilir!
-{: .notice--info}
Bu sayfa yalnızca Linux kullanıcıları içindir. Linux üzerinde değilseniz, buraya bakın [H2testw (windows)](h2testw-(windows)) veya [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Nelere ihtiyacınız var
diff --git a/_pages/tr_TR/f3x-(mac).txt b/_pages/tr_TR/f3x-(mac).txt
index 85a9f2e00c..acc40c635a 100644
--- a/_pages/tr_TR/f3x-(mac).txt
+++ b/_pages/tr_TR/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
SD kartınızın boyutuna ve bilgisayarınıza bağlı olarak bu işlem bir kaç saat sürebilir!
-{: .notice--info}
Bu sayfa yalnızca Mac kullanıcılar içindir. Mac üzerinde değilseniz, buraya bakın [H2testw (windows)](h2testw-(windows)) veya [F3 (Linux)](f3-(linux)).
-{: .notice--info}
#### Nelere ihtiyacınız var
diff --git a/_pages/tr_TR/faq.txt b/_pages/tr_TR/faq.txt
index d7af677b37..50df0f9f7b 100644
--- a/_pages/tr_TR/faq.txt
+++ b/_pages/tr_TR/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**S:** *Son çıkan sistem versiyonundayım, cihazıma hack uygulayabilir miyim?*
**A:** Yes
-
+
**S:** *Luma3DS'i nasıl yükseltebilirim?*
**C:** Luma3DS Updater kullanın
-
+
**S:** *Para ödenerek alınan şu şeyi duydum (Gateway, Sky3DS, vb), bu bana gerekli bir şey mi?*
**C:** Hayır. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**S:** *Elimdeki Gateway kurulu cihazımdaki oyunlarımın kayıt dosyalarını nasıl aktarbilirim?*
**C:** bkz: [burası](https://gbatemp.net/threads/425743/)
-
+
**S:** *Rehberi kullanırken neye ihtiyacım olacak?*
**A:** Bu rehber tamamen bedava yazılımlar kullanılarak yapılabilir
-
+
**S:** *Konsolumu hacklemek ne kadar riskli?*
**C:** Tüm güvenlik kontrollerini görmezden gelmediğiniz / atlatmadığınız sürece brick olması *neredeyse* imkansızdır.
-
+
**S:** *Bununla homebrew ve emülatör'leri çalıştırabilir miyim?*
**C:** Evet! Custom Firmware, sadece Homebrew Launcher'a erişim sağlamakla kalmaz, aynı zamanda tüm sürümlerde hack yapabilmenizi mümkün kılar, böylece cihazı güncelleseniz bile sonsuza dek yüklü kalır.
-
+
**S:** *Bununla farklı bölge oyunlarını oynayabilir miyim?*
**C:** Luma3DS bölge kısıtlaması olmadan ve ekstra bir işlem yapmadan herhangi bir bölgeden olan oyunları oynamanızı sağlar.
-
+
**S:** *CFW SysNAND'ı güncellemek güvenli midir?*
**C:** Evet. Bu güvenli, daha fazla sormanıza gerek yok.
-
+
**S:** *Destek içim kime, nereye başvurmalıyım?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**S:** *Bunu 4GB (ya da daha az) kapasiteli bir SD kart kullanarak yapabilir miyim?*
**C:** Evet!
-
+
**S:** *128 GB (ya da daha büyük) bir SD kart kullanabilirmiyim?*
**C:** Evet, ancak bazı kullanıcılar böyle büyük alanlar kullanırken yavaşlamalar olduğunu rapor ettiler. Kartı exFAT ile formatlayamayacağınızı unutmayın; FAT32 ile biçimlendirmeniz gerekir.
-
+
**S:** *Bunun sonunda yeni bir SD karta nasıl geçebilirim?*
**C:** Tüm dosyaları yeni SD karta kopyalamanız yeterlidir.
-
+
**S:** *Bu işlem sonunda NNID'mi koruyabilir miyim?*
**C:** Bir NNID ile başlar ve her adımı izlerseniz, NNID'nizi en sonunda korumuş olursunuz.
-
+
**S:** * System Transfer'leri nasıl olacak?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Bu işlemleri bilgisayar kullanmadan (örn. android telefonla) yapma imkanım var mı? *
**C:** Tek gerekli olan şey SD karta dosya atabilmeniz!
-
+
**S:** *Yardım edin! Yanlış birşeyler oldu ve cihaz başlamıyor...*
**C:** Lütfen [Sorun Giderme Rehberi](troubleshooting)'ne bakın.
diff --git a/_pages/tr_TR/file-extensions-(windows).txt b/_pages/tr_TR/file-extensions-(windows).txt
index aeba218ae3..8d2c73fd7f 100644
--- a/_pages/tr_TR/file-extensions-(windows).txt
+++ b/_pages/tr_TR/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Talimatlar
diff --git a/_pages/tr_TR/finalizing-setup.txt b/_pages/tr_TR/finalizing-setup.txt
index 380bdf6a72..9de80558e3 100644
--- a/_pages/tr_TR/finalizing-setup.txt
+++ b/_pages/tr_TR/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Adımlara genel bakış
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
Biz bu rehberde, AuroraWright'ın Luma3DS [AuroraWright](https://github.com/AuroraWright/) kullanacağız, bu sayede EmuNAND ile alakalı bir işlem yapmamıza gerek kalmayacak ve işi basitleştirip SD kart hafızasında da daha az yer kaplayacak.
-
+
Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz:
+ **FBI** *(CIA formatlı oyunları ve uygulamaları kurar)*
@@ -18,10 +17,6 @@ Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### Nelere ihtiyacınız var
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-Artık Luma3DS'i güncellemek için tek yapmanız gereken Luma3DS Updater'i açıp (A)'ya basıp güncelle demektir.
+Artık Luma3DS'i güncellemek için tek yapmanız gereken Luma3DS Updater'i açıp (A)'ya basıp güncelle demektir.
+
Bu bir Sistem Güncellemesi ile aynı şey değildir; sadece en yeni Luma3DS dosyalarını indirir ve çıkarır.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
Luma3DS yapılandırma menüsünü başlatmak için önyüklemede (Select) tuşunu basılı tutabilirsiniz.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/tr_TR/flashing-ntrboot-(custom-firmware).txt b/_pages/tr_TR/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..edf4793a5c
--- /dev/null
+++ b/_pages/tr_TR/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### Nelere ihtiyacınız var
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Talimatlar
+
+##### Bölüm l - Hazırlık
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. İşlem tamamlanana kadar bekleyin
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. İşlem tamamlanana kadar bekleyin
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/tr_TR/flashing-ntrboot-(powersaves).txt b/_pages/tr_TR/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/tr_TR/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/tr_TR/get-started-(new-3ds).txt b/_pages/tr_TR/get-started-(new-3ds).txt
index 52d8728bb0..b798a4a7f5 100644
--- a/_pages/tr_TR/get-started-(new-3ds).txt
+++ b/_pages/tr_TR/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Uygun sayfaya ulaşmak için aşağıdaki tablodan sürümünüze uyanı seçin.
-{: .notice--primary}
+Uygun sayfaya ulaşmak için aşağıdaki tablodan sürümünüze uyanı seçin. Note that the "from" and "to" fields are inclusive. Bu şu anlama gelir,örneğin, "9.0.0 'dan 9.2.0 ye kadar" sırasına 9.0.0, 9.1.0, ve 9.2.0 dahildir.
-Note that the "from" and "to" fields are inclusive. Bu şu anlama gelir,örneğin, "9.0.0 'dan 9.2.0 ye kadar" sırasına 9.0.0, 9.1.0, ve 9.2.0 dahildir.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Cihaz versiyonu, sistem ayarlarındayken üst ekranın sağ alt kısmında görülebilir.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Cihaz versiyonu, sistem ayarlarındayken üst ekranın sağ alt kısmında gör
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/tr_TR/get-started-(old-3ds).txt b/_pages/tr_TR/get-started-(old-3ds).txt
index 7561652656..41b5e61394 100644
--- a/_pages/tr_TR/get-started-(old-3ds).txt
+++ b/_pages/tr_TR/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Uygun sayfaya ulaşmak için aşağıdaki tablodan sürümünüze uyanı seçin.
-{: .notice--primary}
+Uygun sayfaya ulaşmak için aşağıdaki tablodan sürümünüze uyanı seçin. Note that the "from" and "to" fields are inclusive. Bu şu anlama gelir,örneğin, "9.0.0 'dan 9.2.0 ye kadar" sırasına 9.0.0, 9.1.0, ve 9.2.0 dahildir.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Eğer versiyon numaranız -0 ise tarayıcınız yoktur, -0 dışındaki her hangi bir numaraya sahipseniz tarayıcınız yüklüdür.
-{% capture notice-1 %}
-Grafiğin ilk iki sütunu, sürümünüzün son sayısına karşılık gelir (bu, sisteme kurulu olan tarayıcı sürümüne karşılık gelir). Eğer versiyon numaranız -0 ise tarayıcınız yoktur, -0 dışındaki her hangi bir numaraya sahipseniz tarayıcınız yüklüdür.
-
-"-dan" ve "-ye" alanları dahildir. Bu şu anlama gelir,örneğin, "9.0.0 'dan 9.2.0 ye kadar" sırasına 9.0.0, 9.1.0, ve 9.2.0 dahildir.
-
Örneğin "5.0.0-0U" söz konusu olduğunda, "Tarayıcı yok" sütununu ve 5.0.0'dan 5.1.0'a kadar seçeneğini seçerek devam edilmesi gerekir. Çünkü sistem o versiyon aralığında ve tarayıcı yüklü değil.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! Homebrew'ı çalıştırmak için [alternatif bir yöntem](homebrew-launcher-(alternatives)) gerekir!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-9.9.0 veya daha üst versiyon barındıran bir oyun kartuşu kullanarak güncelleme yaparsanız fakat tarayıcınız -25'ten düşükse (örneğin 10.2.0-24) tarayıcınız silinir ve 'Tarayıcı yok' sütununu takip etmeniz gerekir.
-{: .notice--warning}
Cihaz versiyonu, sistem ayarlarındayken üst ekranın sağ alt kısmında görülebilir.
-{: .notice--success}
{: .notice--info}
+9.9.0 veya daha üst versiyon barındıran bir oyun kartuşu kullanarak güncelleme yaparsanız fakat tarayıcınız -25'ten düşükse (örneğin 10.2.0-24) tarayıcınız silinir ve 'Tarayıcı yok' sütununu takip etmeniz gerekir.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/tr_TR/get-started.txt b/_pages/tr_TR/get-started.txt
index f9ccaeb6ba..5d0e948788 100644
--- a/_pages/tr_TR/get-started.txt
+++ b/_pages/tr_TR/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Bu sayfa, cihazınız için nereden başlayacağınızı bulmanıza yardımcı olacaktır.
-Resimdeki aygıtların renkleri değişmekle birlikte size uygun olan cihazı seçmek için buton yerleşimlerine ve cihaz özelliklerine dikkat ederek seçim yapınız.
-{: .notice}
-
-Cihazınıza uygun resime tıklayarak uygun sayfaya gidin.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. Bu sayfa, cihazınız için nereden başlayacağınızı bulmanıza yardımcı olacaktır.
-{: .notice--info}
+Cihazınıza uygun resime tıklayarak uygun sayfaya gidin. Resimdeki aygıtların renkleri değişmekle birlikte size uygun olan cihazı seçmek için buton yerleşimlerine ve cihaz özelliklerine dikkat ederek seçim yapınız.
Eğer daha önceden 3DS cihazınızı hacklediyseniz ve EmuNAND tabanlı CFW yüklediyseniz, SysNAND bölümündeki adımları takip ediniz. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Başlamadan önce, SD kartınızı hatalara karşı kontrol edebilirsiniz. [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), ya da [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/tr_TR/godmode9-usage.txt b/_pages/tr_TR/godmode9-usage.txt
index 1616ee25e3..c4205dced0 100644
--- a/_pages/tr_TR/godmode9-usage.txt
+++ b/_pages/tr_TR/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/tr_TR/h2testw-(windows).txt b/_pages/tr_TR/h2testw-(windows).txt
index f5ffd0b51e..06af875c21 100644
--- a/_pages/tr_TR/h2testw-(windows).txt
+++ b/_pages/tr_TR/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
SD kartınızın boyutuna ve bilgisayarınıza bağlı olarak bu işlem bir kaç saat sürebilir!
-{: .notice--info}
Bu sayfa yalnızca Windows kullanıcıları içindir. Windows üzerinde değilseniz, buraya bakın [F3 (linux)](f3-(linux)) veya [F3X (mac)](f3x-(mac)).
-{: .notice--info}
#### Nelere ihtiyacınız var
diff --git a/_pages/tr_TR/home.txt b/_pages/tr_TR/home.txt
index e451f155d6..ae591713dc 100644
--- a/_pages/tr_TR/home.txt
+++ b/_pages/tr_TR/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") homebrew kullanılarak kolayca yapılamayacak ileri hacklemelerin yapılmasını sağlar. Örneğin, imzasız uygulamaları direk Ana Menünüze yüklemenize olanak verir.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## Bu rehber neleri yükleyecek?
diff --git a/_pages/tr_TR/homebrew-launcher-(alternatives).txt b/_pages/tr_TR/homebrew-launcher-(alternatives).txt
index d1b8ace805..859a632cab 100644
--- a/_pages/tr_TR/homebrew-launcher-(alternatives).txt
+++ b/_pages/tr_TR/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
Homebrew Launcher'ın çok sayıda giriş noktası veya başlatma yöntemi vardır.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### Gerekenler
diff --git a/_pages/tr_TR/homebrew-launcher-(soundhax).txt b/_pages/tr_TR/homebrew-launcher-(soundhax).txt
index 4816d308d4..d8385b407b 100644
--- a/_pages/tr_TR/homebrew-launcher-(soundhax).txt
+++ b/_pages/tr_TR/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Homebrew Launcher'ın çok sayıda giriş noktası veya başlatma yöntemi vardır.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! Homebrew'ı çalıştırmak için [alternatif bir yöntem](homebrew-launcher-(alternatives)) gerekir!
{% endcapture %}
diff --git a/_pages/tr_TR/installing-boot9strap-(browser).txt b/_pages/tr_TR/installing-boot9strap-(browser).txt
index c7a0f6c4b7..efd2c2a8f4 100644
--- a/_pages/tr_TR/installing-boot9strap-(browser).txt
+++ b/_pages/tr_TR/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. EmuNAND ve RedNAND terimlerinin, birbirinden farklı uygulamalara işaret ettiğini unutmayın.[aynı konsept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Nelere ihtiyacınız var
diff --git a/_pages/tr_TR/installing-boot9strap-(dsiware).txt b/_pages/tr_TR/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/tr_TR/installing-boot9strap-(dsiware).txt
+++ b/_pages/tr_TR/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/tr_TR/installing-boot9strap-(dsiware-game-injection).txt b/_pages/tr_TR/installing-boot9strap-(dsiware-game-injection).txt
index 71278f07f1..65c41436ca 100644
--- a/_pages/tr_TR/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/tr_TR/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Bu rehberi kullanmak için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) linkleri açabilen bir torrent programına ihtiyaç duyulacaktır. **
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Nelere ihtiyacınız var
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/tr_TR/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/tr_TR/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/tr_TR/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/tr_TR/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/tr_TR/installing-boot9strap-(dsiware-save-injection).txt b/_pages/tr_TR/installing-boot9strap-(dsiware-save-injection).txt
index 47b47362d5..4dfcd6019a 100644
--- a/_pages/tr_TR/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/tr_TR/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Bu rehberi kullanmak için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) linkleri açabilen bir torrent programına ihtiyaç duyulacaktır. **
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### Nelere ihtiyacınız var
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/tr_TR/installing-boot9strap-(hardmod).txt b/_pages/tr_TR/installing-boot9strap-(hardmod).txt
index b6d87016c3..f35d0dc0a8 100644
--- a/_pages/tr_TR/installing-boot9strap-(hardmod).txt
+++ b/_pages/tr_TR/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
Bu rehberi kullanmak için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) linkleri açabilen bir torrent programına ihtiyaç duyulacaktır. **
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### Nelere ihtiyacınız var
diff --git a/_pages/tr_TR/installing-boot9strap-(homebrew-launcher).txt b/_pages/tr_TR/installing-boot9strap-(homebrew-launcher).txt
index 0da65e55ee..8e8fb308d3 100644
--- a/_pages/tr_TR/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/tr_TR/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. EmuNAND ve RedNAND terimlerinin, birbirinden farklı uygulamalara işaret ettiğini unutmayın.[aynı konsept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Talimatlar
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/tr_TR/installing-boot9strap-(mset).txt b/_pages/tr_TR/installing-boot9strap-(mset).txt
index ecb71e852a..591485cb15 100644
--- a/_pages/tr_TR/installing-boot9strap-(mset).txt
+++ b/_pages/tr_TR/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. EmuNAND ve RedNAND terimlerinin, birbirinden farklı uygulamalara işaret ettiğini unutmayın.[aynı konsept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Nelere ihtiyacınız var
diff --git a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..6bd40c2911
--- /dev/null
+++ b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### Nelere ihtiyacınız var
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* En son sürümü [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the '.7z' file) *
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Talimatlar
+
+##### Bölüm l - Hazırlık
+
+1. Cihazınızı kapatın
+1. SD kartınızı bilgisayarınıza takın
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. SD kartınızı cihazınıza tekrar takın
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Cihazınızı kapatın
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. SD kartınızı bilgisayarınıza takın
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. SD kartınızı cihazınıza tekrar takın
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Kaydedip yeniden başlatmak için (Start) basın
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. İşlem tamamlanana kadar bekleyin
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/tr_TR/move-emunand.txt b/_pages/tr_TR/move-emunand.txt
index a6e7188d1f..6bf96dbd4a 100644
--- a/_pages/tr_TR/move-emunand.txt
+++ b/_pages/tr_TR/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. EmuNAND ve RedNAND terimlerinin, birbirinden farklı uygulamalara işaret ettiğini unutmayın.[aynı konsept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/tr_TR/ntr-and-cubic-ninja.txt b/_pages/tr_TR/ntr-and-cubic-ninja.txt
index 7278e9378f..a4b8f322c5 100644
--- a/_pages/tr_TR/ntr-and-cubic-ninja.txt
+++ b/_pages/tr_TR/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
Bu rehberi kullanmak için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) linkleri açabilen bir torrent programına ihtiyaç duyulacaktır. **
-{: .notice--success}
-** NTR Cubic Ninja sadece JPN New3DS için çalışacaktır! **
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### Nelere ihtiyacınız var
diff --git a/_pages/tr_TR/ntrboot.txt b/_pages/tr_TR/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/tr_TR/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/tr_TR/region-changing.txt b/_pages/tr_TR/region-changing.txt
index 4eb883017e..0d18261ad8 100644
--- a/_pages/tr_TR/region-changing.txt
+++ b/_pages/tr_TR/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Luma3DS region dışı oyunları desteklediği için region değiştirme neredeyse gereksizdir [Luma3DS özellikleri](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
Bu rehberi kullanmak için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) linkleri açabilen bir torrent programına ihtiyaç duyulacaktır. **
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Bu işlem, NNID'nizin sistemle olan bağlantısını kaldıracaktır, çünkü artık uyumlu olmayacaktır. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Bu işlem, NNID'nizin sistemle olan bağlantısını kaldıracaktır, çünkü a
Bu işlemden sonra, yalnızca ** eShop'a daha önce hiç erişmemiş New 3DS ** ve **herhangi bir Old 3DS ** yeni bölgeye yeni bir NNID oluşturduktan sonra eShop'a erişebilecektir. Orijinal regionda eShop'a erişmiş New 3DS'ler için yeni bir NNID oluşturamaz ve yeni bölgede eShop'a erişemez!
{: .notice--warning}
-Bazen eShop'un açıklanamaz şekilde çalışması gereken aygıtlar için hala çalışmayabileceğini unutmayın. Bu tamamen Nintendo serverları ile alakalıdır ve benim kontrolümde olan bir durum değil.
-{: .notice--warning}
-
-Yukarıdaki uyarıya benzer olarak, zaman zaman eShop açıklanamaz bir şekilde çalışmaması gereken cihazlarda çalışabilir,(New 3DS gibi). Neden olduğu şu an için bilinmiyor.
-{: .notice--warning}
+Bazen eShop'un açıklanamaz şekilde çalışması gereken aygıtlar için hala çalışmayabileceğini unutmayın. Bu tamamen Nintendo serverları ile alakalıdır ve benim kontrolümde olan bir durum değil. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Neden olduğu şu an için bilinmiyor.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### Nelere ihtiyacınız var
diff --git a/_pages/tr_TR/site-navigation.txt b/_pages/tr_TR/site-navigation.txt
index 931ca86c35..a6c8859f7b 100644
--- a/_pages/tr_TR/site-navigation.txt
+++ b/_pages/tr_TR/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Başlarken (New 3DS)](get-started-(new-3ds))
+ [Başlarken (Old 3DS)](get-started-(old-3ds))
+ [Başlarken](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [EmuNAND' Taşıma](move-emunand)
+ [NTR ve Cubic Ninja](ntr-and-cubic-ninja)
+ [Bölge Değiştirme](region-changing)
diff --git a/_pages/tr_TR/troubleshooting.txt b/_pages/tr_TR/troubleshooting.txt
index 885e800e58..a2c8dd4ddf 100644
--- a/_pages/tr_TR/troubleshooting.txt
+++ b/_pages/tr_TR/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
3DS'inizi çalıştıramıyorsanız lütfen ilgili bölüme bakın ve talimatları izleyin. Çözüm işe yaradığında ana kılavuzdan devam edebilirsiniz
(Bu bölüm oldukça uzundur, sorununuzu bulmak için Ctrl+F kullanın.)
-{: .notice--primary}
-**Eğer hala sorununuzu çözemediyseniz ve yardıma ihtiyacınız varsa, lütfen SD kartınızdaki ilgili tüm .log dosyalarını [Gist](https://gist.github.com/)'e yapıştırın, daha sonra sorununuzun ve neleri denediğinizin ayrıntılı açıklamaları ile yardım isteyin.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
Bu rehberi kullanmak için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) linkleri açabilen bir torrent programına ihtiyaç duyulacaktır. **
-{: .notice--success}
## Kılavuzu tamamladıktan sonra DSi / DS işlevselliği bozuldu
diff --git a/_pages/tr_TR/uninstall-cfw.txt b/_pages/tr_TR/uninstall-cfw.txt
index 3b864f4598..781ff8064f 100644
--- a/_pages/tr_TR/uninstall-cfw.txt
+++ b/_pages/tr_TR/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### Nelere ihtiyacınız var
diff --git a/_pages/tr_TR/updating-b9s.txt b/_pages/tr_TR/updating-b9s.txt
index 2c95a0cb7c..578c8477f6 100644
--- a/_pages/tr_TR/updating-b9s.txt
+++ b/_pages/tr_TR/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/uk_UA/9.2.0-ctrtransfer.txt b/_pages/uk_UA/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/uk_UA/9.2.0-ctrtransfer.txt
+++ b/_pages/uk_UA/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/uk_UA/a9lh-to-b9s.txt b/_pages/uk_UA/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/uk_UA/a9lh-to-b9s.txt
+++ b/_pages/uk_UA/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/uk_UA/cart-update.txt b/_pages/uk_UA/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/uk_UA/cart-update.txt
+++ b/_pages/uk_UA/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/uk_UA/credits.txt b/_pages/uk_UA/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/uk_UA/credits.txt
+++ b/_pages/uk_UA/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/uk_UA/f3-(linux).txt b/_pages/uk_UA/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/uk_UA/f3-(linux).txt
+++ b/_pages/uk_UA/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/uk_UA/f3x-(mac).txt b/_pages/uk_UA/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/uk_UA/f3x-(mac).txt
+++ b/_pages/uk_UA/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/uk_UA/faq.txt b/_pages/uk_UA/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/uk_UA/faq.txt
+++ b/_pages/uk_UA/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/uk_UA/file-extensions-(windows).txt b/_pages/uk_UA/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/uk_UA/file-extensions-(windows).txt
+++ b/_pages/uk_UA/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/uk_UA/finalizing-setup.txt b/_pages/uk_UA/finalizing-setup.txt
index f959c138cf..e462ce4bfe 100644
--- a/_pages/uk_UA/finalizing-setup.txt
+++ b/_pages/uk_UA/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Overview of steps
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/uk_UA/flashing-ntrboot-(custom-firmware).txt b/_pages/uk_UA/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/uk_UA/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/uk_UA/flashing-ntrboot-(powersaves).txt b/_pages/uk_UA/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/uk_UA/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/uk_UA/get-started-(new-3ds).txt b/_pages/uk_UA/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/uk_UA/get-started-(new-3ds).txt
+++ b/_pages/uk_UA/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/uk_UA/get-started-(old-3ds).txt b/_pages/uk_UA/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/uk_UA/get-started-(old-3ds).txt
+++ b/_pages/uk_UA/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/uk_UA/get-started.txt b/_pages/uk_UA/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/uk_UA/get-started.txt
+++ b/_pages/uk_UA/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/uk_UA/godmode9-usage.txt b/_pages/uk_UA/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/uk_UA/godmode9-usage.txt
+++ b/_pages/uk_UA/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/uk_UA/h2testw-(windows).txt b/_pages/uk_UA/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/uk_UA/h2testw-(windows).txt
+++ b/_pages/uk_UA/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/uk_UA/home.txt b/_pages/uk_UA/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/uk_UA/home.txt
+++ b/_pages/uk_UA/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/uk_UA/homebrew-launcher-(alternatives).txt b/_pages/uk_UA/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/uk_UA/homebrew-launcher-(alternatives).txt
+++ b/_pages/uk_UA/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/uk_UA/homebrew-launcher-(soundhax).txt b/_pages/uk_UA/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/uk_UA/homebrew-launcher-(soundhax).txt
+++ b/_pages/uk_UA/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/uk_UA/installing-boot9strap-(browser).txt b/_pages/uk_UA/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/uk_UA/installing-boot9strap-(browser).txt
+++ b/_pages/uk_UA/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/uk_UA/installing-boot9strap-(dsiware).txt b/_pages/uk_UA/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/uk_UA/installing-boot9strap-(dsiware).txt
+++ b/_pages/uk_UA/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/uk_UA/installing-boot9strap-(dsiware-game-injection).txt b/_pages/uk_UA/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/uk_UA/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/uk_UA/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/uk_UA/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/uk_UA/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/uk_UA/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/uk_UA/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/uk_UA/installing-boot9strap-(dsiware-save-injection).txt b/_pages/uk_UA/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/uk_UA/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/uk_UA/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/uk_UA/installing-boot9strap-(hardmod).txt b/_pages/uk_UA/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/uk_UA/installing-boot9strap-(hardmod).txt
+++ b/_pages/uk_UA/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/uk_UA/installing-boot9strap-(homebrew-launcher).txt b/_pages/uk_UA/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/uk_UA/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/uk_UA/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/uk_UA/installing-boot9strap-(mset).txt b/_pages/uk_UA/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/uk_UA/installing-boot9strap-(mset).txt
+++ b/_pages/uk_UA/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/uk_UA/move-emunand.txt b/_pages/uk_UA/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/uk_UA/move-emunand.txt
+++ b/_pages/uk_UA/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/uk_UA/ntr-and-cubic-ninja.txt b/_pages/uk_UA/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/uk_UA/ntr-and-cubic-ninja.txt
+++ b/_pages/uk_UA/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/uk_UA/ntrboot.txt b/_pages/uk_UA/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/uk_UA/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/uk_UA/region-changing.txt b/_pages/uk_UA/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/uk_UA/region-changing.txt
+++ b/_pages/uk_UA/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/uk_UA/site-navigation.txt b/_pages/uk_UA/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/uk_UA/site-navigation.txt
+++ b/_pages/uk_UA/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/uk_UA/troubleshooting.txt b/_pages/uk_UA/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/uk_UA/troubleshooting.txt
+++ b/_pages/uk_UA/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/uk_UA/uninstall-cfw.txt b/_pages/uk_UA/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/uk_UA/uninstall-cfw.txt
+++ b/_pages/uk_UA/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/uk_UA/updating-b9s.txt b/_pages/uk_UA/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/uk_UA/updating-b9s.txt
+++ b/_pages/uk_UA/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/vi_VN/9.2.0-ctrtransfer.txt b/_pages/vi_VN/9.2.0-ctrtransfer.txt
index 54ae26d924..d12d1eecee 100644
--- a/_pages/vi_VN/9.2.0-ctrtransfer.txt
+++ b/_pages/vi_VN/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/vi_VN/a9lh-to-b9s.txt b/_pages/vi_VN/a9lh-to-b9s.txt
index 094e459f02..ae75aa25c8 100644
--- a/_pages/vi_VN/a9lh-to-b9s.txt
+++ b/_pages/vi_VN/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/vi_VN/cart-update.txt b/_pages/vi_VN/cart-update.txt
index 65767b93e0..28bb8dc692 100644
--- a/_pages/vi_VN/cart-update.txt
+++ b/_pages/vi_VN/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
+
+This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
{% endcapture %}
{{ notice-1 | markdownify }}
-This also means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change.
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/vi_VN/credits.txt b/_pages/vi_VN/credits.txt
index ff86c15641..d7e82a266a 100644
--- a/_pages/vi_VN/credits.txt
+++ b/_pages/vi_VN/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
If I forgot you here, contact me and I'll add your name.
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/vi_VN/f3-(linux).txt b/_pages/vi_VN/f3-(linux).txt
index cabeb9d369..f7dd226f9d 100644
--- a/_pages/vi_VN/f3-(linux).txt
+++ b/_pages/vi_VN/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/vi_VN/f3x-(mac).txt b/_pages/vi_VN/f3x-(mac).txt
index 85e7150ded..981262d4ca 100644
--- a/_pages/vi_VN/f3x-(mac).txt
+++ b/_pages/vi_VN/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/vi_VN/faq.txt b/_pages/vi_VN/faq.txt
index 0d949d8de4..8da1e6188e 100644
--- a/_pages/vi_VN/faq.txt
+++ b/_pages/vi_VN/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**Q:** *I am on the latest system version, is my device hackable?*
**A:** Yes
-
+
**Q:** *How do I update Luma3DS?*
**A:** Use Luma3DS Updater
-
+
**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?*
**A:** No. boot9strap is a superior method of loading hax that runs early in boot.
-
+
**Q:** *How do I move saves from an existing Gateway setup to device installed games?*
**A:** See [this](https://gbatemp.net/threads/425743/)
-
+
**Q:** *What do I need to do this guide?*
**A:** This guide can be completely done with free software
-
+
**Q:** *How risky is hacking my console?*
**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks.
-
+
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates.
-
+
**Q:** *Can I use this to play games from other regions?*
**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps.
-
+
**Q:** *Is it safe to update CFW SysNAND?*
**A:** Yes. This is safe, stop asking about it.
-
+
**Q:** *Where should I go for support?*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**Q:** *Can I do this with a 4GB (or smaller) SD card?*
**A:** Yes!
-
+
**Q:** *Can I use a 128 GB (or larger) SD card?*
**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32.
-
+
**Q:** *How do I move to a new SD card at the end of this?*
**A:** Just copy all the files to the new SD card.
-
+
**Q:** *Can I keep my NNID?*
**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end.
-
+
**Q:** *What about System Transfers?*
**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost).
-
+
**Q:** *Can I do this without a computer (e.g. an Android phone)?*
**A:** All you need is the ability to put files on an SD card!
-
+
**Q:** *Help! Something bad happened and now I cannot boot...*
**A:** Please look at the [troubleshooting guide](troubleshooting).
diff --git a/_pages/vi_VN/file-extensions-(windows).txt b/_pages/vi_VN/file-extensions-(windows).txt
index d434d8aee7..0a11b67527 100644
--- a/_pages/vi_VN/file-extensions-(windows).txt
+++ b/_pages/vi_VN/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### Instructions
diff --git a/_pages/vi_VN/finalizing-setup.txt b/_pages/vi_VN/finalizing-setup.txt
index 3487218fa6..6997322565 100644
--- a/_pages/vi_VN/finalizing-setup.txt
+++ b/_pages/vi_VN/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### Tổng quan các bước
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
@@ -18,10 +17,6 @@ During this process, we also setup programs such as the following:
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### What you need
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
+
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/vi_VN/flashing-ntrboot-(custom-firmware).txt b/_pages/vi_VN/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..860dd16f48
--- /dev/null
+++ b/_pages/vi_VN/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### What you need
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/vi_VN/flashing-ntrboot-(powersaves).txt b/_pages/vi_VN/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/vi_VN/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/vi_VN/get-started-(new-3ds).txt b/_pages/vi_VN/get-started-(new-3ds).txt
index 7dcceb231e..5e9b5ba8cd 100644
--- a/_pages/vi_VN/get-started-(new-3ds).txt
+++ b/_pages/vi_VN/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/vi_VN/get-started-(old-3ds).txt b/_pages/vi_VN/get-started-(old-3ds).txt
index e3051beb26..6fedf30601 100644
--- a/_pages/vi_VN/get-started-(old-3ds).txt
+++ b/_pages/vi_VN/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-Select the appropriate page for your version from the chart below.
-{: .notice--primary}
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-{% capture notice-1 %}
-The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-
In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column.
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/vi_VN/get-started.txt b/_pages/vi_VN/get-started.txt
index 4432675e76..9aaee386ee 100644
--- a/_pages/vi_VN/get-started.txt
+++ b/_pages/vi_VN/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
-{: .notice}
-
-Click the image of your device to take you to the appropriate page.
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. This page will help you find where to start for your device.
-{: .notice--info}
+Click the image of your device to take you to the appropriate page. The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/vi_VN/godmode9-usage.txt b/_pages/vi_VN/godmode9-usage.txt
index aad3fcf76a..1264febabf 100644
--- a/_pages/vi_VN/godmode9-usage.txt
+++ b/_pages/vi_VN/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality, you can copy, delete, rename files and create folders.
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/vi_VN/h2testw-(windows).txt b/_pages/vi_VN/h2testw-(windows).txt
index b6a3018793..45982dc0e4 100644
--- a/_pages/vi_VN/h2testw-(windows).txt
+++ b/_pages/vi_VN/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
Depending on the size of your SD card and the speed of your computer, this process can take up to several hours!
-{: .notice--info}
This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.
-{: .notice--info}
#### What you need
diff --git a/_pages/vi_VN/home.txt b/_pages/vi_VN/home.txt
index 2d5b4ab540..836190145f 100644
--- a/_pages/vi_VN/home.txt
+++ b/_pages/vi_VN/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu.
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## What does this guide install?
diff --git a/_pages/vi_VN/homebrew-launcher-(alternatives).txt b/_pages/vi_VN/homebrew-launcher-(alternatives).txt
index db0ca1369c..6642541c58 100644
--- a/_pages/vi_VN/homebrew-launcher-(alternatives).txt
+++ b/_pages/vi_VN/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### What you need
diff --git a/_pages/vi_VN/homebrew-launcher-(soundhax).txt b/_pages/vi_VN/homebrew-launcher-(soundhax).txt
index 1ade427a02..4160eee10e 100644
--- a/_pages/vi_VN/homebrew-launcher-(soundhax).txt
+++ b/_pages/vi_VN/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
The Homebrew Launcher has many different entrypoints, or methods of launching.
-{: .notice--info}
Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/vi_VN/installing-boot9strap-(browser).txt b/_pages/vi_VN/installing-boot9strap-(browser).txt
index 036495e21f..02d4e594d9 100644
--- a/_pages/vi_VN/installing-boot9strap-(browser).txt
+++ b/_pages/vi_VN/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/vi_VN/installing-boot9strap-(dsiware).txt b/_pages/vi_VN/installing-boot9strap-(dsiware).txt
index 0992f8537b..db2caca5c9 100644
--- a/_pages/vi_VN/installing-boot9strap-(dsiware).txt
+++ b/_pages/vi_VN/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
One of these methods only works with four specific games that are no longer sold on the eShop, while the other works with quite a few games still sold on the eShop.
-{: .notice--info}
Both of these methods require two devices. One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-Both systems MUST be from the same region.
-{: .notice--warning}
Both of these methods will assume that the 3DS running custom firmware is using boot9strap or arm9loaderhax and has completed this guide. While it is possible to do these methods with some other kind of custom firmware, that is out of the scope of this guide.
-{: .notice--info}
Both of these methods use a combination of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws), and an oversight that allows DSiWare titles to read and write to anywhere in encrypted NAND.
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+Both systems MUST be from the same region.
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/vi_VN/installing-boot9strap-(dsiware-game-injection).txt b/_pages/vi_VN/installing-boot9strap-(dsiware-game-injection).txt
index ec865d73d6..a75a468195 100644
--- a/_pages/vi_VN/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/vi_VN/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/vi_VN/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/vi_VN/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/vi_VN/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/vi_VN/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/vi_VN/installing-boot9strap-(dsiware-save-injection).txt b/_pages/vi_VN/installing-boot9strap-(dsiware-save-injection).txt
index c06fd70b6f..fbc73f683b 100644
--- a/_pages/vi_VN/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/vi_VN/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### What you need
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/vi_VN/installing-boot9strap-(hardmod).txt b/_pages/vi_VN/installing-boot9strap-(hardmod).txt
index 44047045e0..36da9ddb45 100644
--- a/_pages/vi_VN/installing-boot9strap-(hardmod).txt
+++ b/_pages/vi_VN/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### What you need
diff --git a/_pages/vi_VN/installing-boot9strap-(homebrew-launcher).txt b/_pages/vi_VN/installing-boot9strap-(homebrew-launcher).txt
index da2bb297b5..6bcdc2978b 100644
--- a/_pages/vi_VN/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/vi_VN/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### Instructions
@@ -20,6 +19,8 @@ If you have already hacked your device before and have a EmuNAND based CFW setup
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### Section II - Installing boot9strap
diff --git a/_pages/vi_VN/installing-boot9strap-(mset).txt b/_pages/vi_VN/installing-boot9strap-(mset).txt
index a6c2da002a..e518606327 100644
--- a/_pages/vi_VN/installing-boot9strap-(mset).txt
+++ b/_pages/vi_VN/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### What you need
diff --git a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..0ae838b75d
--- /dev/null
+++ b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### What you need
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### Instructions
+
+##### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. Insert your SD card into your computer
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. Wait until the process is completed
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/vi_VN/move-emunand.txt b/_pages/vi_VN/move-emunand.txt
index 9d834ac081..0fafbe46d6 100644
--- a/_pages/vi_VN/move-emunand.txt
+++ b/_pages/vi_VN/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/vi_VN/ntr-and-cubic-ninja.txt b/_pages/vi_VN/ntr-and-cubic-ninja.txt
index 0849f238db..046dca7b25 100644
--- a/_pages/vi_VN/ntr-and-cubic-ninja.txt
+++ b/_pages/vi_VN/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-**NTR Cubic Ninja will work for JPN New 3DS ONLY!**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### What you need
diff --git a/_pages/vi_VN/ntrboot.txt b/_pages/vi_VN/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/vi_VN/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/vi_VN/region-changing.txt b/_pages/vi_VN/region-changing.txt
index 72b009ccde..d452b2253b 100644
--- a/_pages/vi_VN/region-changing.txt
+++ b/_pages/vi_VN/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. This is done by installing the 9.2.0 CTRTransfer image for the region you want to switch to.
-{: .notice--primary}
-**Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ This process will unlink your NNID from the system, since it will no longer be c
After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
{: .notice--warning}
-Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
-{: .notice--warning}
-
-Similar to the above warning, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
-{: .notice--warning}
+Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### What you need
diff --git a/_pages/vi_VN/site-navigation.txt b/_pages/vi_VN/site-navigation.txt
index 583ebcd58f..0dcb84fac5 100644
--- a/_pages/vi_VN/site-navigation.txt
+++ b/_pages/vi_VN/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Get Started (New 3DS)](get-started-(new-3ds))
+ [Get Started (Old 3DS)](get-started-(old-3ds))
+ [Get Started](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
diff --git a/_pages/vi_VN/troubleshooting.txt b/_pages/vi_VN/troubleshooting.txt
index 8e9a0ebb18..0f9eb95333 100644
--- a/_pages/vi_VN/troubleshooting.txt
+++ b/_pages/vi_VN/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
If you are unable to boot your device, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide
(The section is fairly long, try using Ctrl+F to search for your issue.)
-{: .notice--primary}
-**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## DSi / DS functionality is broken after completing the guide
diff --git a/_pages/vi_VN/uninstall-cfw.txt b/_pages/vi_VN/uninstall-cfw.txt
index 5faf36a090..04a08f980a 100644
--- a/_pages/vi_VN/uninstall-cfw.txt
+++ b/_pages/vi_VN/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### What you need
diff --git a/_pages/vi_VN/updating-b9s.txt b/_pages/vi_VN/updating-b9s.txt
index b6be0cac96..85170c142a 100644
--- a/_pages/vi_VN/updating-b9s.txt
+++ b/_pages/vi_VN/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/zh_CN/9.2.0-ctrtransfer.txt b/_pages/zh_CN/9.2.0-ctrtransfer.txt
index 0d2a8ee21b..4ef430e4b4 100644
--- a/_pages/zh_CN/9.2.0-ctrtransfer.txt
+++ b/_pages/zh_CN/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTR转移"
---
This is add-on section for installing a 9.2.0 CTRTransfer image to your device.
-{: .notice--primary}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
diff --git a/_pages/zh_CN/a9lh-to-b9s.txt b/_pages/zh_CN/a9lh-to-b9s.txt
index f84a0574ed..85063bf4fa 100644
--- a/_pages/zh_CN/a9lh-to-b9s.txt
+++ b/_pages/zh_CN/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH to B9S"
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
-{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
-{: .notice--info}
+
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
{: .notice--warning}
-To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/zh_CN/cart-update.txt b/_pages/zh_CN/cart-update.txt
index 9eca3908a1..9c6f17a82b 100644
--- a/_pages/zh_CN/cart-update.txt
+++ b/_pages/zh_CN/cart-update.txt
@@ -3,20 +3,18 @@ title: "Cart Update"
---
所有的游戏卡带都自带一份所需版本系统的拷贝，使得低版本系统的玩家即使在没有互联网链接的情况下，也可以用卡带升级到所需的系统版本
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! 你需要用[其他方法](homebrew-launcher-(alternatives)) 来进入自制程序启动器！
+
+这意味着卡带升级不会在你没有浏览器的情况下给你安装一个浏览器。 它只会升级实际的系统版本（例如，2.1.0-0 -> 6.0.0-0）。 版本号的最后一位（即-0） 不会变更。
{% endcapture %}
{{ notice-1 | markdownify }}
-这意味着卡带升级不会在你没有浏览器的情况下给你安装一个浏览器。 它只会升级实际的系统版本（例如，2.1.0-0 -> 6.0.0-0）。 版本号的最后一位（即-0） 不会变更。
-{: .notice--warning}
-
**Updating with a game cart containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
{: .notice--danger}
diff --git a/_pages/zh_CN/credits.txt b/_pages/zh_CN/credits.txt
index 3df1e7361d..84b63c0e3a 100644
--- a/_pages/zh_CN/credits.txt
+++ b/_pages/zh_CN/credits.txt
@@ -9,7 +9,6 @@ title: "Credits"
{: .notice--primary}
如果我忘了列出你的名字，请联系我。我会把你加上。
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/zh_CN/f3-(linux).txt b/_pages/zh_CN/f3-(linux).txt
index 228ad943c0..36d1cf7afb 100644
--- a/_pages/zh_CN/f3-(linux).txt
+++ b/_pages/zh_CN/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
This is an add-on section for checking your SD card for errors using F3.
-{: .notice--info}
取决于你的 SD 卡的容量大小和电脑的速度，这个过程可能耗时达几个小时！
-{: .notice--info}
本节教程仅限Linux用户。 如果你不是 Linux 用户，请查阅 [H2testw (windows)](h2testw-(windows)) 或 [F3X (mac)](f3x-(mac)) 页面。
-{: .notice--info}
#### 你需要
diff --git a/_pages/zh_CN/f3x-(mac).txt b/_pages/zh_CN/f3x-(mac).txt
index e03aaab48d..55a85469b8 100644
--- a/_pages/zh_CN/f3x-(mac).txt
+++ b/_pages/zh_CN/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
This is an add-on section for checking your SD card for errors using F3X.
-{: .notice--info}
本节操作可能需要数小时的时间，取决于你的SD卡大小和你电脑的速度！
-{: .notice--info}
本节教程仅限Mac用户。 如果你的操作系统不是Mac，参见[H2testw (windows)](h2testw-(windows))或[F3 (Linux)](f3-(linux))页面。
-{: .notice--info}
#### 你需要
diff --git a/_pages/zh_CN/faq.txt b/_pages/zh_CN/faq.txt
index 01061b677f..a15dcb470e 100644
--- a/_pages/zh_CN/faq.txt
+++ b/_pages/zh_CN/faq.txt
@@ -6,52 +6,52 @@ title: "FAQ"
**问:** *我的系统是最新版本，可以破解吗?*
**答:** 是的
-
+
**问:** *我如何升级Luma3DS？*
**答:** 使用Luma3DS Updater（Luma3DS升级器）。
-
+
**问:** *我听说做破解需要使用一些有偿的工具（Gateway，Sky3DS，等等），我是否真的需要用到？*
**答:** 不。 boot9strap is a superior method of loading hax that runs early in boot.
-
+
**问:** *我如何将Gateway中的游戏存档迁移到机器内安装的游戏中？*
**答:** 参见[这里](https://gbatemp.net/threads/425743/)。
-
+
**问:** *完成本教程需要哪些东西？*
**答:** 本教程完全可以使用免费软件完成。
-
+
**问:** *破解我的机器风险有多大？*
**答:** 除非你忽略/跳过所有的安全检查，否则现在*基本*上不可能变砖。
-
+
**问:** *我可以通过这个破解来运行很棒的自制程序和模拟器吗？*
**答:** 可以！ 自制固件不仅能运行Homebrew Launcher（自制程序启动器），还能让你在任何系统版本上都保持破解状态，这就意味着即使你升级系统，破解还存在。
-
+
**问:** *我可以通过这个破解来玩别的区域的游戏么？*
**答:** Luma3DS支持跨区补丁，使得用户可以安装和运行任何区域的游戏，无需额外操作。
-
+
**问:** *升级CFW SysNAND（自制的系统固件）是否安全？*
**答:** 是的， 非常安全。别再问了。
-
+
**问:** *我应该在哪里获取支持？*
**A:** For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
-
+
**问:** *我可以使用4GB或更小的SD卡来完成本教程吗？*
**答:** 可以！
-
+
**问:** *我能使用128GB或更大的SD卡吗？*
**答:** 可以，但是有些用户反映使用如此大容量的SD卡会造成速度变慢。 请不要将你的卡格式化为exFAT格式。你应该把卡格式化为FAT32格式。
-
+
**问:** *完成本教程后，如果我想更换SD卡该怎么做？*
**答:** 把所有原SD卡上的所有文件复制到新SD卡上即可。
-
+
**问:** *我可以保留我的NNID吗？*
**答:** 如果你在教程开始之前已经登录了NNID，并且严格按照教程的步骤进行，完成教程后你的NNID还在。
-
+
**问:** *系统迁移该怎么做？*
**答:** 当你完成本教程之后，你可以和另一台做过 boot9strap 破解的3DS或2DS进行来回迁移，就像你在未破解设备或者EmuNAND上进行的那样（在迁移过程中你会丢失所有的非法游戏/主题/DLC；所有（包括丢失的游戏）存档会被保留）。
-
+
**问:** *没有电脑也能完成本教程吗（例如 用一台安卓手机）？*
**答:** 只要你能把文件放到SD卡上就行！
-
+
**问:** *求助！ 出了一些意外，我的机器现在启动不了……*
**答:** 参见[问题排查](troubleshooting)。
diff --git a/_pages/zh_CN/file-extensions-(windows).txt b/_pages/zh_CN/file-extensions-(windows).txt
index 53cdee864a..1991654776 100644
--- a/_pages/zh_CN/file-extensions-(windows).txt
+++ b/_pages/zh_CN/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "File Extensions (Windows)"
---
This is an add-on section for disabling Windows's default behavior of hiding file extensions.
-{: .notice--info}
This will make it easier for you to find the referenced files in the rest of this guide.
-{: .notice--info}
#### 操作指南
diff --git a/_pages/zh_CN/finalizing-setup.txt b/_pages/zh_CN/finalizing-setup.txt
index a354c7b6d1..7ad439b92e 100644
--- a/_pages/zh_CN/finalizing-setup.txt
+++ b/_pages/zh_CN/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "Finalizing Setup"
#### 步骤概览
-{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-
+
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
-
+
在这个过程当中，我们还会安装像下面所示的几个工具：
+ **FBI** *(用来安装CIA格式的游戏和程序)*
@@ -18,10 +17,6 @@ In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/)
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### 你需要
* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
@@ -134,8 +129,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
___
{% capture notice-10 %}
-你现在可以使用Luma3DS Updater来更新你的Luma3DS到最新版，只需运行该程序并按下(A)键。
+你现在可以使用Luma3DS Updater来更新你的Luma3DS到最新版，只需运行该程序并按下(A)键。
+
这和系统升级不是一回事；它只会下载并提取最新的Luma3DS文件。
+
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
@@ -143,9 +140,13 @@ This will only update the Luma3DS files on your SD card. If you boot your device
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
+
你可以在启动时按下Select键，进入Luma3DS的设置菜单。
+
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
+
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
+
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image. If you have it, leave the `DCIM` folder as this contains any pictures taken with the 3DS camera:
-
+
{% endcapture %}
diff --git a/_pages/zh_CN/flashing-ntrboot-(custom-firmware).txt b/_pages/zh_CN/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..746b824108
--- /dev/null
+++ b/_pages/zh_CN/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### 你需要
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### 操作指南
+
+##### 第一部分 - 准备工作
+
+1. Power off **the source 3DS**
+1. Insert **the source 3DS**'s SD card into your computer
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. 等待测试完成
+1. Press (B) to return to the main menu
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. 等待测试完成
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/zh_CN/flashing-ntrboot-(powersaves).txt b/_pages/zh_CN/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/zh_CN/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/zh_CN/get-started-(new-3ds).txt b/_pages/zh_CN/get-started-(new-3ds).txt
index 8c49b7bd50..fd2d1fa410 100644
--- a/_pages/zh_CN/get-started-(new-3ds).txt
+++ b/_pages/zh_CN/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "Get Started (New 3DS)"
---
-请在下表中按照你的系统版本选择对应的页面。
-{: .notice--primary}
+请在下表中按照你的系统版本选择对应的页面。 Note that the "from" and "to" fields are inclusive. 举个例子，“从9.0.0到9.2.0”这一行包括9.0.0，9.1.0，和9.2.0。
-Note that the "from" and "to" fields are inclusive. 举个例子，“从9.0.0到9.2.0”这一行包括9.0.0，9.1.0，和9.2.0。
-{: .notice--info}
-
-Note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide.
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ Your device version can be found at the bottom right of the top screen of the Sy
ALL VERSIONS
|
- Installing boot9strap (ntrboothax)
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/zh_CN/get-started-(old-3ds).txt b/_pages/zh_CN/get-started-(old-3ds).txt
index 24c0b7122f..d77f0bfb3b 100644
--- a/_pages/zh_CN/get-started-(old-3ds).txt
+++ b/_pages/zh_CN/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "Get Started (Old 3DS)"
---
-请在下表中按照你的系统版本选择对应的页面。
-{: .notice--primary}
+请在下表中按照你的系统版本选择对应的页面。 Note that the "from" and "to" fields are inclusive. 也就是说，举个例子“从9.0.0到9.2.0”这一行表示9.0.0，9.1.0，和9.2.0。
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). 如果版本号以0结尾，则说明没有浏览器，如果大于0则表示浏览器已经安装。
-{% capture notice-1 %}
-下面表格的后两列对应着你系统版本的结尾数字（代表着安装在系统中浏览器的版本）。 如果版本号以0结尾，则说明没有浏览器，如果大于0则表示浏览器已经安装。
-
-“从”和“到”两列分别包含各自对应的版本号。 也就是说，举个例子“从9.0.0到9.2.0”这一行表示9.0.0，9.1.0，和9.2.0。
-
例如，如果系统版本为“5.0.0-0U”，你需要定位到“无浏览器”这一列和“从5.0.0到5.1.0”这一行，因为系统版本在那个范围内并且无浏览器 。
-{% endcapture %}
-
- {}{ notice-1 | markdownify }
For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions.
-{: .notice--info}
-
-{% capture notice-1 %}
-
-Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-如果你是从包含9.9.0或以上的游戏卡带升级而来*(这说明你的系统已经是9.9.0或以上版本，但你的浏览器还是以-25或更低结尾，比方说10.2.0-24)*, 你的浏览器已经被删除了，请看“无浏览器”列。
-{: .notice--warning}
Your device version can be found at the bottom right of the top screen of the System Settings.
-{: .notice--success}
{: .notice--info}
+如果你是从包含9.9.0或以上的游戏卡带升级而来*(这说明你的系统已经是9.9.0或以上版本，但你的浏览器还是以-25或更低结尾，比方说10.2.0-24)*, 你的浏览器已经被删除了，请看“无浏览器”列。
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/zh_CN/get-started.txt b/_pages/zh_CN/get-started.txt
index c6ff6bf1b4..d4d34444c9 100644
--- a/_pages/zh_CN/get-started.txt
+++ b/_pages/zh_CN/get-started.txt
@@ -2,23 +2,14 @@
title: "Get Started"
---
-This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. 下面的一系列页面将会帮助你针对你的设备找到适合的开始方案。
-图片中机器的颜色可能会不同，但是请特别关注按键的布局和每台机器的特点，确保你选择了正确的机型。
-{: .notice}
-
-请点击对应你设备的图片，进入相应的教程页面。
-{: .notice--primary}
-
-Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap Custom Firmware. 下面的一系列页面将会帮助你针对你的设备找到适合的开始方案。
-{: .notice--info}
+请点击对应你设备的图片，进入相应的教程页面。 图片中机器的颜色可能会不同，但是请特别关注按键的布局和每台机器的特点，确保你选择了正确的机型。
如果你已经破解过你的3DS，并安装了基于EmuNAND的自制系统，请在SysNAND上进行本教程的所有操作。 Your data will be transfered from EmuNAND to your new B9S install at the end.
-{: .notice--info}
-Note that screenshots in this guide can be enlarged to show more context by clicking on them.
-{: .notice--info}
+This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s).
+{: .notice--primary}
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
@@ -26,9 +17,6 @@ Before starting, Windows users should enable the option to show file extensions
开始之前，你可能想检测一下SD卡错误。可以使用[H2testw (Windows)](h2testw-(windows))、[F3 (Linux)](f3-(linux))或[F3X (Mac)](f3x-(mac))。
{: .notice--warning}
-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! This includes CHN and TWN region devices that were previously unhackable!
-{: .notice--success}
-
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/zh_CN/godmode9-usage.txt b/_pages/zh_CN/godmode9-usage.txt
index d63f6e7b52..3dd1d091f4 100644
--- a/_pages/zh_CN/godmode9-usage.txt
+++ b/_pages/zh_CN/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "GodMode9 Usage"
---
GodMode9是一款适用于任天堂3DS的全权限文件管理器。它能够让你访问SD卡、真实系统或者虚拟系统中FAT文件分区以及其他任何地方的文件。 其更多的功能还包括复制、删除、重命名文件或者是创建文件夹。
-{: .notice--primary}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
{% capture notice %}
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console.
-
+
The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something. As always, be smart, keep backups, just to be safe.
{% endcapture %}
diff --git a/_pages/zh_CN/h2testw-(windows).txt b/_pages/zh_CN/h2testw-(windows).txt
index 40a5077d67..81aa54ed49 100644
--- a/_pages/zh_CN/h2testw-(windows).txt
+++ b/_pages/zh_CN/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
This is an add-on section for checking your SD card for errors using h2testw.
-{: .notice--info}
本节操作可能需要数小时的时间，取决于你的SD卡大小和你电脑的速度！
-{: .notice--info}
本节教程仅限Windows用户。 如果你的操作系统不是Windows，参见[F3X (mac)](f3x-(mac))或[F3 (Linux)](f3-(linux))页面
-{: .notice--info}
#### 你需要
diff --git a/_pages/zh_CN/home.txt b/_pages/zh_CN/home.txt
index 9fc78f30d2..8a9ba5aab9 100644
--- a/_pages/zh_CN/home.txt
+++ b/_pages/zh_CN/home.txt
@@ -37,7 +37,7 @@ In most cases, running homebrew on your device is 100% free using [just the Nint
**Custom Firmware（自制系统）** ("CFW") 可以使你进行自制程序无法轻易做到的更高级的破解。 例如，签名补丁可以使你安装未签名的程序，并让它们出现在桌面中。
-CFW can be easily set up on any console that is on 11.5.0 or lower.
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## 本教程将安装什么？
diff --git a/_pages/zh_CN/homebrew-launcher-(alternatives).txt b/_pages/zh_CN/homebrew-launcher-(alternatives).txt
index 2832bd8d3d..bc5f81b412 100644
--- a/_pages/zh_CN/homebrew-launcher-(alternatives).txt
+++ b/_pages/zh_CN/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher (Alternatives)"
---
Homebrew Launcher（HBL）有许多不同的入口和启动方式。
-{: .notice--info}
If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
#### 你需要
diff --git a/_pages/zh_CN/homebrew-launcher-(soundhax).txt b/_pages/zh_CN/homebrew-launcher-(soundhax).txt
index cbb7a4c880..aaad36266f 100644
--- a/_pages/zh_CN/homebrew-launcher-(soundhax).txt
+++ b/_pages/zh_CN/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher (Soundhax)"
---
Homebrew Launcher (HBL) 有许多不同的入口和启动方式。
-{: .notice--info}
声音破解兼容从9.0.0到11.3.0的欧版、日版、韩版、和美版系统。
-{: .notice--info}
Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
-{: .notice--info}
{% capture notice-1 %}
Note that Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. Cart Updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
+
This means that using a Cart Update from a version containing an older Nintendo 3DS Sound version *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher!
{% endcapture %}
diff --git a/_pages/zh_CN/installing-boot9strap-(browser).txt b/_pages/zh_CN/installing-boot9strap-(browser).txt
index 3ef8361787..c6e923c979 100644
--- a/_pages/zh_CN/installing-boot9strap-(browser).txt
+++ b/_pages/zh_CN/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Browser)"
---
如果你的3DS之前已经破解并安装了基于虚拟系统（EnuNAND）的自制系统（CFW），请务必注意本教程仅适用于真实系统（SysNAND），并且教程内的所有步骤都应当在你的真实系统（SysNAND）上进行。 Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### 你需要
diff --git a/_pages/zh_CN/installing-boot9strap-(dsiware).txt b/_pages/zh_CN/installing-boot9strap-(dsiware).txt
index 6d3fb5cb61..a5ef055259 100644
--- a/_pages/zh_CN/installing-boot9strap-(dsiware).txt
+++ b/_pages/zh_CN/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "Installing boot9strap (DSiWare)"
---
There are two different methods of installing boot9strap using DSiWare on 11.5.0.
-{: .notice--info}
其中一种方法只兼容四个已从eShop撤除的游戏，而另一种方法可以用不少eShop上仍可下载的 DSiWare 游戏。
-{: .notice--info}
两种方法都需要两台设备。 One 3DS (or 2DS) must be running some kind of custom firmware (such as boot9strap or arm9loaderhax) and is referred to as the *source 3DS*, while the other 3DS (or 2DS) is on stock 11.5.0 and referred to as the *target 3DS*.
-{: .notice--info}
-
-两台机子必须属于同一地区。
-{: .notice--warning}
两种方法都将默认源 3DS 是已通过本站教程破解了 B9S／A9LH 的。 虽然通过其他破解方法破解的源 3DS 也可行，但其超出了本教程的范围。
-{: .notice--info}
两种方法的实现都是结合了“固件已知明文分区”的弱点（参见[这里](https://www.3dbrew.org/wiki/3DS_System_Flaws)）和允许DSiWare游戏在整个加密的NAND系统中任意读写的疏忽处。
-{: .notice--info}
-{% capture notice-4 %}
Both of these methods require you to [System Transfer](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/) from a CFW 3DS to a stock 3DS as part of the steps. System Transfers will work in the following directions *only*:
+ New 3DS or New 2DS -> New 3DS or New 2DS
+ Old 3DS or Old 2DS -> Old 3DS or Old 2DS
- + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + Old 3DS or Old 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+两台机子必须属于同一地区。
+{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo! (details can be found in the instructions)
-{: .notice--danger}
-
-System Transfers can only be performed once a week per NNID.
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! System Transfers can only be performed once a week per NNID.
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[Installing boot9strap (DSiWare Save Injection)](installing-boot9strap-(dsiware-save-injection))
-
+
This method requires that the source 3DS already legitimately owns one of the following games:
+ "Fieldrunners"
@@ -57,9 +45,9 @@ A pirated copy of the game will *not* work, and all of these games have been pul
{% capture notice-1 %}
[Installing boot9strap (DSiWare Game Injection)](installing-boot9strap-(dsiware-game-injection))
-
+
This method requires that the source 3DS buys or already legitimately owns one of the games listed on the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page.
-
+
A pirated copy of the game will *not* work.
{% endcapture %}
diff --git a/_pages/zh_CN/installing-boot9strap-(dsiware-game-injection).txt b/_pages/zh_CN/installing-boot9strap-(dsiware-game-injection).txt
index 84bc5903e9..67c65b3941 100644
--- a/_pages/zh_CN/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/zh_CN/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "Installing boot9strap (DSiWare Game Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
+
+If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### 你需要
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
+ A pirated copy of the game will **not** work
+ For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
diff --git a/_pages/zh_CN/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/zh_CN/installing-boot9strap-(dsiware-game-injection-list).txt
index a987a3bef1..03ac964bfb 100644
--- a/_pages/zh_CN/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/zh_CN/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "Installing boot9strap (DSiWare Game Injection List)"
---
This is an automatically generated list of all [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware)) compatible games.
-{: .notice--primary}
-The list is sectioned off by region in the order USA, EUR, JPN.
-{: .notice--info}
-
-Each section is sorted by ascending price.
-{: .notice--info}
+The list is sectioned off by region in the order USA, EUR, JPN. Each section is sorted by ascending price.
QR Codes can be scanned by pressing (L + R) on the home menu, then tapping the QR icon on the bottom screen.
-{: .notice--info}
-The size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/zh_CN/installing-boot9strap-(dsiware-save-injection).txt b/_pages/zh_CN/installing-boot9strap-(dsiware-save-injection).txt
index 94e8045312..315f357a90 100644
--- a/_pages/zh_CN/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/zh_CN/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "Installing boot9strap (DSiWare Save Injection)"
---
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Before proceeding, ensure you have read all of the notices and warnings on [Installing boot9strap (DSiWare)](installing-boot9strap-(dsiware))
-{: .notice--danger}
If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
{: .notice--danger}
#### 你需要
-* Two 3DS systems
- + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the 3DS on stock firmware *on 11.5.0*
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* Already own one of the following exploitable DSiWare games (a pirated copy of the game will **not** work) on **the source 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/zh_CN/installing-boot9strap-(hardmod).txt b/_pages/zh_CN/installing-boot9strap-(hardmod).txt
index f6dbdd8ebe..fcf4c65be2 100644
--- a/_pages/zh_CN/installing-boot9strap-(hardmod).txt
+++ b/_pages/zh_CN/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "Installing boot9strap (Hardmod)"
---
An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
-{: .notice--info}
This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
-{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.
-{: .notice--success}
#### 你需要
diff --git a/_pages/zh_CN/installing-boot9strap-(homebrew-launcher).txt b/_pages/zh_CN/installing-boot9strap-(homebrew-launcher).txt
index 5211143cde..93b3525812 100644
--- a/_pages/zh_CN/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/zh_CN/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (Homebrew Launcher)"
---
如果你的3DS之前已经破解并安装了基于虚拟系统（EnuNAND）的自制系统（CFW），请务必注意本教程仅适用于真实系统（SysNAND），并且教程内的所有步骤都应当在你的真实系统（SysNAND）上进行。 注意EmuNAND和RedNAND是[同一概念](http://3dbrew.org/wiki/NAND_Redirection)的两种略微不同的实现。
-{: .notice--info}
#### 操作指南
@@ -20,6 +19,8 @@ title: "Installing boot9strap (Homebrew Launcher)"
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ 如果直接启动 SoundHax，会让这些提示每次都跳出来，除非你先跳过提示，然后再正常重新启动播放程式
1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### 第二部分 - 安装 boot9strap
diff --git a/_pages/zh_CN/installing-boot9strap-(mset).txt b/_pages/zh_CN/installing-boot9strap-(mset).txt
index 06b5a0e1d2..7357166bb1 100644
--- a/_pages/zh_CN/installing-boot9strap-(mset).txt
+++ b/_pages/zh_CN/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "Installing boot9strap (MSET)"
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
-{: .notice--info}
#### 你需要
diff --git a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..afcdfa8b08
--- /dev/null
+++ b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### 你需要
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* 自制程序[新手包](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### 操作指南
+
+##### 第一部分 - 准备工作
+
+1. Power off your device
+1. 将你的 SD 卡插入到您的计算机
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+
+ 
+ {: .notice--info}
+
+1. Reinsert your SD card into your device
+1. Power on your device
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Power off your device
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+
+##### Section III - Installing boot9strap
+
+1. Wait for all safety checks to complete
+1. When prompted, input the key combo given to install boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### Section IV - Configuring Luma3DS
+
+1. 将你的 SD 卡插入到您的计算机
+1. Delete `boot.firm` from the root of your SD card
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+1. Your device should have booted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + If you get an error, just continue the next page
+
+___
+
+Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. 等待测试完成
+1. Press (B) to return to the main menu
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/zh_CN/move-emunand.txt b/_pages/zh_CN/move-emunand.txt
index 52ba942403..e4ecf1ed31 100644
--- a/_pages/zh_CN/move-emunand.txt
+++ b/_pages/zh_CN/move-emunand.txt
@@ -3,10 +3,8 @@ title: "Move EmuNAND"
---
本节是附加章节，将你的EmuNAND的数据迁移到新的SysNAND自制系统中，然后删除EmuNAND分区。 注意EmuNAND和RedNAND是[同一概念](http://3dbrew.org/wiki/NAND_Redirection)的两种略微不同的实现。
-{: .notice--info}
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
+Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
diff --git a/_pages/zh_CN/ntr-and-cubic-ninja.txt b/_pages/zh_CN/ntr-and-cubic-ninja.txt
index f89964c09e..bea1cb33c8 100644
--- a/_pages/zh_CN/ntr-and-cubic-ninja.txt
+++ b/_pages/zh_CN/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR and Cubic Ninja"
---
你需要一个支持BT种子协议的下载程序如 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 或者迅雷来使用本教程中的 [磁力链](https://zh.wikipedia.org/wiki/%E7%A3%81%E5%8A%9B%E9%93%BE%E6%8E%A5) 。
-{: .notice--success}
-**NTR立体忍者仅在日版的新3DS上有效！**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### 你需要
diff --git a/_pages/zh_CN/ntrboot.txt b/_pages/zh_CN/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/zh_CN/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/zh_CN/region-changing.txt b/_pages/zh_CN/region-changing.txt
index 74999c80f2..142c9b87f9 100644
--- a/_pages/zh_CN/region-changing.txt
+++ b/_pages/zh_CN/region-changing.txt
@@ -3,16 +3,12 @@ title: "Region Changing"
---
This is add-on section for region changing your CFW SysNAND. 这是通过安装你想要切换到的地区的 9.2.0 CTR转移镜像而达成。
-{: .notice--primary}
-**Luma3DS已经支持跨区游戏和独立的[title区域模拟](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage)，区域变更已经变得几乎没有必要。**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
本过程将解绑你的NNID和你的系统，因为它们不再兼容。 NNID's are locked to the region of your device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
@@ -20,19 +16,14 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
区域变更后，只有从未访问过eShop的新3DS和任何老3DS可以在新的区域创建一个新的NNID并访问eShop。已经在原来的区域访问过eShop的新3DS将不能创建一个新的NNID，并在新的区域上访问eShop！ 已经在原来的区域访问过eShop的新3DS将不能创建一个新的NNID，并在新的区域上访问eShop！
{: .notice--warning}
-请注意，有时候eShop在某些本应该可以访问的设备上还是莫名其妙地无法正常访问。 这完全取决于任天堂的服务器，我真的背不了这个锅.
-{: .notice--warning}
-
-如上面的警告，注意，eshop有时会工作在别的设备（如有个新3DS）。 我们现在不知道为什么。
-{: .notice--warning}
+请注意，有时候eShop在某些本应该可以访问的设备上还是莫名其妙地无法正常访问。 这完全取决于任天堂的服务器，我真的背不了这个锅. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). 我们现在不知道为什么。
Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices.
-{: .notice--warning}
-Never format a New 2DS while on a version <11.4.0 or you will be unable to complete initial setup!
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**你_必须_已经安装好 Luma3DS 和 boot9strap 或 arm9loaderhax 才能使用本章节所介绍的方法**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### 你需要
diff --git a/_pages/zh_CN/site-navigation.txt b/_pages/zh_CN/site-navigation.txt
index 354afaeccf..4f19f5267a 100644
--- a/_pages/zh_CN/site-navigation.txt
+++ b/_pages/zh_CN/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [常见问题](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
+ [Finalizing Setup](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [开始教程（新3DS）](get-started-(new-3ds))
+ [开始教程（老3DS）](get-started-(old-3ds))
+ [开始教程](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [迁移EmuNAND数据](move-emunand)
+ [NTR和立体忍者](ntr-and-cubic-ninja)
+ [区域变更](region-changing)
diff --git a/_pages/zh_CN/troubleshooting.txt b/_pages/zh_CN/troubleshooting.txt
index c639785c51..7e4674a553 100644
--- a/_pages/zh_CN/troubleshooting.txt
+++ b/_pages/zh_CN/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "Troubleshooting"
如果你启动不了你的设备，请参阅本页面中的相关章节，并按照教程执行。 问题解决后，便可回到主教程继续进行。
（本页面内容较多，请尝试使用Ctrl+F查找相关内容）
-{: .notice--primary}
-**如果尝试了本页面的指导后问题仍未解决，请将SD卡上生成的所有.log文件复制到[Gist](https://gist.github.com/)，然后向我们求助，并附上你对问题的详细描述以及你尝试过的解决方案。**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-{: .notice--success}
## 完成本教程后DSi / DS功能失效
diff --git a/_pages/zh_CN/uninstall-cfw.txt b/_pages/zh_CN/uninstall-cfw.txt
index 675b299904..93e9b26b87 100644
--- a/_pages/zh_CN/uninstall-cfw.txt
+++ b/_pages/zh_CN/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "Uninstall CFW"
---
This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock.
-{: .notice--danger}
Any unsigned (illegitimate) games will be rendered unusable and can be manually removed using the Data Management section of the System Settings. Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about.
-{: .notice--info}
This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games.
-{: .notice--info}
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
-{: .notice--info}
#### 你需要
diff --git a/_pages/zh_CN/updating-b9s.txt b/_pages/zh_CN/updating-b9s.txt
index df2874f132..aeaf0f762d 100644
--- a/_pages/zh_CN/updating-b9s.txt
+++ b/_pages/zh_CN/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "Updating B9S"
---
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
-{: .notice--info}
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
-{: .notice--warning}
{% capture notice-1 %}
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
diff --git a/_pages/zh_TW/9.2.0-ctrtransfer.txt b/_pages/zh_TW/9.2.0-ctrtransfer.txt
index aeb7308ad1..8648c08a3c 100644
--- a/_pages/zh_TW/9.2.0-ctrtransfer.txt
+++ b/_pages/zh_TW/9.2.0-ctrtransfer.txt
@@ -3,13 +3,10 @@ title: "9.2.0 CTRTransfer"
---
本篇為用來安裝 9.2.0 CTRTransfer 鏡像檔至您主機上的附加章節。
-{: .notice--primary}
本頁面會有些許的[磁力](https://en.wikipedia.org/wiki/Magnet_URI_scheme)連結，您將需要個像 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 的 BT 種子下載器來下載磁力連結的檔案。
-{: .notice--success}
請注意，如果您在 SD 卡中的 `/luma/payloads/` 資料夾中放有除了 `GodMode9.firm` 的 payload 檔案，在開機時按住「Start」鍵將會顯示一個「加載選單」，從那裏你得透過方向鍵及按鈕「A」選擇「GodMode9」。
-{: .notice--info}
千萬不要在低於版本 11.4.0 的 New 2DS 上格式化，否則你將無法完成初始設置！
{: .notice--danger}
diff --git a/_pages/zh_TW/a9lh-to-b9s.txt b/_pages/zh_TW/a9lh-to-b9s.txt
index 5cdc7f811a..2b85d76fa7 100644
--- a/_pages/zh_TW/a9lh-to-b9s.txt
+++ b/_pages/zh_TW/a9lh-to-b9s.txt
@@ -3,17 +3,14 @@ title: "A9LH 至 B9S"
---
本頁面適用於想更新至 boot9strap 且已安裝 arm9loaderhax 的使用者使用。
-{: .notice--info}
未來的 Luma3DS 版本都只會推出 `.firm` 格式的檔案；此格式僅相容於 boot9strap 以及 sighax。 也就是說，如果您想要繼續使用最新版的 Luma3DS，您應透過本教學來更新您的主機。
-{: .notice--info}
+
+本頁面會有些許的[磁力](https://en.wikipedia.org/wiki/Magnet_URI_scheme)連結，您將需要個像 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 的 BT 種子下載器來下載磁力連結的檔案。
如果您先前有在 Luma3DS 中設置了安全 PIN 碼，除非您暫時將其關閉，否則 SafeB9SInstaller 安裝包將會出現「OTP Crypto Fail」的錯誤訊息。
{: .notice--warning}
-本頁面會有些許的[磁力](https://en.wikipedia.org/wiki/Magnet_URI_scheme)連結，您將需要個像 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 的 BT 種子下載器來下載磁力連結的檔案。
-{: .notice--success}
-
{% capture notice-1 %}
近日有許多的自製韌體用戶已經被任天堂封殺，幾乎所有的線上功能都被禁止使用。 為了自保，請在遵循本教學前進行以下防護措施：
diff --git a/_pages/zh_TW/cart-update.txt b/_pages/zh_TW/cart-update.txt
index f8e9b5691f..774dade6d8 100644
--- a/_pages/zh_TW/cart-update.txt
+++ b/_pages/zh_TW/cart-update.txt
@@ -3,20 +3,18 @@ title: "卡帶更新"
---
所有的卡帶都有附上玩那遊戲所需要的系統更新，讓擁有比較舊的系統版本的玩家可以在離線的狀態下更新系統。
-{: .notice--info}
{% capture notice-1 %}
請注意，卡帶更新只會更新系統的核心組件，像是系統設定、HOME 主選單等。 卡帶更新不會更新「任天堂 3DS 音樂（Nintendo 3DS Sound）」程式或是線上下載的功能，如軟體和資料轉移、網頁瀏覽器、擦身通信 Mii 廣場、或是電子商店（eShop）。
-
+
這也就是說，如果本身系統版本有安裝較舊版的「任天堂 3DS 音樂（Nintendo 3DS Sound）」程式*（歐、日、韓、及美版的舊型 3DS 的版本為 <7.0.0）*且透過含有較新版本音樂撥放器的卡帶進行更新，[Soundhax](homebrew-launcher-(soundhax)) 漏洞將無法正常執行！ 您將會需要透過[另一個方法](homebrew-launcher-(alternatives))才能使用 Homebrew Launcher。
+
+意思也就是卡帶更新不會在您沒有瀏覽器的情況下給您安裝一個瀏覽器。 他**只會**更新實際的系統版本而已。*（例：2.1.0-0 -> 6.0.0-0）* 版本號碼的最後一個數字*(-0的部分)***不會**改變。
{% endcapture %}
{{ notice-1 | markdownify }}
-意思也就是卡帶更新不會在您沒有瀏覽器的情況下給您安裝一個瀏覽器。 他**只會**更新實際的系統版本而已。*（例：2.1.0-0 -> 6.0.0-0）* 版本號碼的最後一個數字*(-0的部分)***不會**改變。
-{: .notice--warning}
-
**透過持有系統版本 9.9.0 或更新版本的卡帶更新將會從您的系統中移除網頁瀏覽器直到進行線上更新為止！**
{: .notice--danger}
diff --git a/_pages/zh_TW/credits.txt b/_pages/zh_TW/credits.txt
index c12a45a4c7..8826754e55 100644
--- a/_pages/zh_TW/credits.txt
+++ b/_pages/zh_TW/credits.txt
@@ -9,7 +9,6 @@ title: "製作群"
{: .notice--primary}
如果我忘記把您加進來的話，請與我聯繫。
-{: .notice}
{% capture notice-1 %}
diff --git a/_pages/zh_TW/f3-(linux).txt b/_pages/zh_TW/f3-(linux).txt
index f38a7c7684..81118d81ab 100644
--- a/_pages/zh_TW/f3-(linux).txt
+++ b/_pages/zh_TW/f3-(linux).txt
@@ -3,13 +3,10 @@ title: "F3 (Linux)"
---
本篇為透過 F3 來檢查您 SD 卡是否有任何問題的附加章節。
-{: .notice--info}
根據您的 SD 卡的大小和電腦的速度，本過程可能將花費數小時才能完成 ！
-{: .notice--info}
本教學僅適用於 Linux 使用者。 如果您不在 Linux 平台上，請參閱 [H2testw (windows)](h2testw-(windows)) 或 [F3X (mac)](f3x-(mac))。
-{: .notice--info}
#### 必備項目
diff --git a/_pages/zh_TW/f3x-(mac).txt b/_pages/zh_TW/f3x-(mac).txt
index f78c33724e..1cdea8a67a 100644
--- a/_pages/zh_TW/f3x-(mac).txt
+++ b/_pages/zh_TW/f3x-(mac).txt
@@ -3,13 +3,10 @@ title: "F3X (Mac)"
---
本篇為透過 F3X 來檢查您 SD 卡是否有任何問題的附加章節。
-{: .notice--info}
根據您的 SD 卡的大小和電腦的速度，本過程可能將花費數小時才能完成 ！
-{: .notice--info}
本教學僅適用於 Mac 使用者。 如果您不在 Mac 平台上，請參閱 [H2testw (windows)](h2testw-(windows)) 或 [F3 (Linux)](f3-(linux))。
-{: .notice--info}
#### 必備項目
diff --git a/_pages/zh_TW/faq.txt b/_pages/zh_TW/faq.txt
index a3a8cf765b..e8020a8d6f 100644
--- a/_pages/zh_TW/faq.txt
+++ b/_pages/zh_TW/faq.txt
@@ -6,52 +6,52 @@ title: "常見問題 FAQ"
**Q:** *我目前裝的是最新版的系統，這樣還可以改機嗎？*
**A:** 可以的！
-
+
**Q:** *我該怎麼更新 Luma3DS？*
**A:** 使用 Luma3DS Updater。
-
+
**Q:** *我之前聽說過些付費工具像是 Gateway、Sky3DS 等等的；我會需要這些嗎？*
**A:** 不用。 boot9strap 能在開機前幾秒就能載入改機所需的檔案，因此它是目前最棒的改機方法。
-
+
**Q:** *我該如何從已經設定好的 Gateway 情況下將存檔移到主機上已安裝的遊戲使用？*
**A:** 請見[此](https://gbatemp.net/threads/425743/)。
-
+
**Q:** *本教學中，我將需要些什麼？*
**A:** 整個教學中只會用到免費軟體，不必另外準備。
-
+
**Q:** *改機風險多高？*
**A:** 除非您忽略本教學所有的警示，*基本上*變磚是不可能的。
-
+
**Q:** *我可以透過本教學跑超讚的自製程式跟模擬器嗎？*
**A:** 可以的！ 自製韌體不但可以讓您使用 Homebrew Launcher（一款自製軟體啟動器），甚至還可以免於未來更新系統時自製韌體被蓋掉的困擾。
-
+
**Q:** *我能玩其他區的遊戲嗎？*
**A:** 可以的，Luma3DS 支援破解區碼限制；這也就是說您可以不用修改任何東西就能任意地安裝所有區域的遊戲。
-
+
**Q:** *我可以安全地更新基於 SysNAND 的自製韌體嗎？*
**A:** 可以的！ 這是很安全的，別再問啦。
-
+
**Q:** *如果我遇到問題該怎麼辦？*
**A:** 若需支援，請見 [Discord 上的 Nintendo Homebrew](https://discord.gg/MWxPgEp) 伺服器。
-
+
**Q:** *我可以使用 4GB 或更小的 SD 卡嗎？*
**A:** 可以的！
-
+
**Q:** *我可以使用 128 GB 或更大的 SD 卡嗎？*
**A:** 可以的，但某些使用者表示用這麼大的空間的 SD 卡會出現一些減速的問題。 請注意，請不要使用 exFAT 的格式去格式化；一定得使用 FAT32 的格式。
-
+
**Q:** *改機後，我該如何更換新的 SD 卡？*
**A:** 從舊的 SD 卡將所有檔案複製到新的 SD 卡中即可。
-
+
**Q:** *我的 NNID 不會被清除吧？*
**A:** 如果您的主機本身就綁有 NNID 且您遵守每個步驟，您的 NNID 將不變。
-
+
**Q:** *那軟體和資料轉移（System Transfers）呢？*
**A:** 在您做完本教學的所有步驟後，您可以在 B9S 改後的 3DS 或 2DS 間進行軟體和資料轉移，跟任何其他未改機或使用 EmuNAND 的主機一樣（不過您在轉移中，您將失去所有非正當管道所取得的遊戲、主題、及資料片；存檔不會有所影響，即使是不見的那些遊戲）。
-
+
**Q:** *沒電腦也可以完成本教學嗎（例： 使用 Android 手機）？*
**A:** 您只要能在 SD 卡上存取檔案就可以了！
-
+
**Q:** *救命啊！ 我的主機開不起來了阿阿阿...*
**A:** 看看我們的[疑難排解](troubleshooting)頁面。
diff --git a/_pages/zh_TW/file-extensions-(windows).txt b/_pages/zh_TW/file-extensions-(windows).txt
index 6723cdd78c..9536a71868 100644
--- a/_pages/zh_TW/file-extensions-(windows).txt
+++ b/_pages/zh_TW/file-extensions-(windows).txt
@@ -3,10 +3,8 @@ title: "檔案副檔名 (Windows)"
---
本篇為改變預設 Windows 隱藏副檔名行為的附加章節。
-{: .notice--info}
顯示副檔名可以讓您在找本教學提到的檔案時更方便些。
-{: .notice--info}
#### 操作說明
diff --git a/_pages/zh_TW/finalizing-setup.txt b/_pages/zh_TW/finalizing-setup.txt
index d290e825aa..27a6dc1ead 100644
--- a/_pages/zh_TW/finalizing-setup.txt
+++ b/_pages/zh_TW/finalizing-setup.txt
@@ -4,12 +4,11 @@ title: "完成安裝"
#### 步驟概述
-{% capture notice-2 %}
`boot.firm` 這個檔案是 boot9strap 由 NAND 載入自身後所接著加載的，且它可以是任何 FIRM 格式的有效 arm9 payload。 您隨時可以替換這檔案，不過 Luma3DS 本身就有內建加載其他 FIRM 格式的 arm9 payload 檔案的功能。
-
+
在本節中，我們將使用 [AuroraWright](https://github.com/AuroraWright/) 的 Luma3DS，直接啟動修改後的 SysNAND 系統，讓我們擺脫 EmuNAND。這除了大量的簡化使用改機後的 3DS 所需的步驟，更還能節省 SD 卡的使用空間。
-
+
在這過程中，我們也將安裝下列程式：
+ **FBI 管理器** *（安裝 CIA 格式的遊戲及程式）*
@@ -18,10 +17,6 @@ title: "完成安裝"
+ **GodMode9** *（多功能工具包，用來處理 NAND 及卡帶的相關功能）*
+ **Homebrew Launcher 啟動器** *（透過 Rosalina，可將 Homebrew Launcher 以普通程式的方式運行）*
-{% endcapture %}
-
-{{ notice-2 | markdownify }}
-
#### 必備項目
* 最新版的 [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(`.cia` 檔案)*
@@ -134,8 +129,10 @@ title: "完成安裝"
___
{% capture notice-10 %}
-您現在可以透過 Luma3DS Updater 來更新您主機中的 Luma3DS，只要將它開啟，再按下「A」即可。
+您現在可以透過 Luma3DS Updater 來更新您主機中的 Luma3DS，只要將它開啟，再按下「A」即可。
+
這跟系統更新是不一樣的；這只會下載並解壓最新的 Luma3DS 檔案。
+
這只會更新 SD 卡上的 Luma3DS 檔案。 如果您在拔除 SD 卡的情況下開機，它則會透過您放在 CTRNAND 裡的 Luma3DS 開機。
{% endcapture %}
@@ -143,9 +140,13 @@ ___
{% capture notice-6 %}
您的主機現在在預設情況下將會自動於開機時啟動基於 SysNAND 的 Luma3DS 自製韌體。
+
您現在可以在開機時透過按住「Select」鍵進入 Luma3DS 的設定選單。
+
您現在可以在開機時透過按住「Start」鍵啟動 Luma3DS 連環加載選單（請注意，它只有在偵測到多個 payload 檔案時，才會顯示 Luma3DS 連環加載選單）。
+
您現在可以在開機時透過按住「Start」+「Select」+「X」轉儲您主機的 ARM11 bootrom（`boot11.bin`）、ARM9 bootrom（`boot9.bin`）、以及您主機特有的 OTP 金鑰（`OTP.bin`）到 SD 卡的 `/ boot9strap /` 資料夾中（請注意，本過程中將不會出現任何的提示或訊息）。
+
您現在可以在開機情況下，透過「L」+「下」+「Select」鍵啟動 Luma3DS 所內建的 Rosalina 選單。 有關所有 Rosalina 相關之功能，請見 [Luma3DS v8.0 更新條目](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
{% endcapture %}
@@ -156,7 +157,7 @@ ___
{% capture notice-7 %}
**刪除 SD 卡中*不在*圖中所列的檔案及資料夾。** 如果您有 `DCIM` 資料夾，請將它留著，因為其中包含您曾透過 3DS 相機所拍攝的相片：
-
+
{% endcapture %}
diff --git a/_pages/zh_TW/flashing-ntrboot-(custom-firmware).txt b/_pages/zh_TW/flashing-ntrboot-(custom-firmware).txt
new file mode 100644
index 0000000000..5832495f9a
--- /dev/null
+++ b/_pages/zh_TW/flashing-ntrboot-(custom-firmware).txt
@@ -0,0 +1,52 @@
+---
+title: "Flashing ntrboot (Custom Firmware)"
+---
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+{: .notice--warning}
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+#### 必備項目
+
+* Your ntrboot compatible DS / DSi flashcart:
+ + Either the Acekard 2i or R4i Gold 3DS RTS
+* Two 3DS family devices
+ + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ + **The target 3DS**: the device on stock firmware
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
+* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+
+#### 操作說明
+
+##### 第一節 — 準備工作
+
+1. 將 **3DS 始源機** 關機
+1. 將 **3DS 始源機** 的 SD 卡插入至電腦中
+1. Create a folder named `ntrboot` on the root of your SD card
+1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
+1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+##### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Dump Flash"
+1. 等到檢查完畢為止。
+1. 按「B」回到主選單
+1. Select "Inject Ntrboot"
+1. Press (Y) to proceed
+1. Press (R) for retail unit ntrboot
+1. 等到檢查完畢為止。
+1. 按「B」回到主選單
+1. Select "EXIT" to power off **the source 3DS**
+
+___
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/zh_TW/flashing-ntrboot-(powersaves).txt b/_pages/zh_TW/flashing-ntrboot-(powersaves).txt
new file mode 100644
index 0000000000..e2a38cf696
--- /dev/null
+++ b/_pages/zh_TW/flashing-ntrboot-(powersaves).txt
@@ -0,0 +1,5 @@
+---
+title: "Flashing ntrboot (Powersaves)"
+---
+
+This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
diff --git a/_pages/zh_TW/get-started-(new-3ds).txt b/_pages/zh_TW/get-started-(new-3ds).txt
index b3ab45e667..3076a09cad 100644
--- a/_pages/zh_TW/get-started-(new-3ds).txt
+++ b/_pages/zh_TW/get-started-(new-3ds).txt
@@ -2,20 +2,13 @@
title: "從頭開始（New 3DS）"
---
-請於下表中選擇與您系統版本相符的頁面。
-{: .notice--primary}
+請於下表中選擇與您系統版本相符的頁面。 請注意，在「從」和「到」區域中的任何版本將包括在內。 比方說，「從 9.0.0 到 9.2.0」，包括著9.0.0版、9.1.0版和 9.2.0版。
-請注意，在「從」和「到」區域中的任何版本將包括在內。 比方說，「從 9.0.0 到 9.2.0」，包括著9.0.0版、9.1.0版和 9.2.0版。
-{: .notice--info}
-
-請注意，系統版本的最後一個數字（前面是破折號）指的是您的瀏覽器版本。 目前，瀏覽器版本與本教學中的 New 3DS 無關。
-{: .notice--info}
+Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. 目前，瀏覽器版本與本教學中的 New 3DS 無關。
所有系統版本都可以透過[卡帶更新](cart-update)中所提到的步驟以升級至更新的版本。
-{: .notice--info}
主機版本可以在「系統設置（System Settings）」中的上方螢幕的右下角找到。
-{: .notice--success}
{: .notice--info}
@@ -61,7 +54,7 @@ title: "從頭開始（New 3DS）"
任意版本
|
- 安裝 boot9strap（透過 ntrboothax）
（需使用可相容的燒錄卡） or 安裝 boot9strap（透過硬改）
（需焊接） |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
\ No newline at end of file
diff --git a/_pages/zh_TW/get-started-(old-3ds).txt b/_pages/zh_TW/get-started-(old-3ds).txt
index cf375d1892..fb5a12047a 100644
--- a/_pages/zh_TW/get-started-(old-3ds).txt
+++ b/_pages/zh_TW/get-started-(old-3ds).txt
@@ -2,40 +2,22 @@
title: "從頭開始（舊型 3DS）"
---
-請於下表中選擇與您系統版本相符的頁面。
-{: .notice--primary}
+請於下表中選擇與您系統版本相符的頁面。 請注意，在「從」和「到」區域中的任何版本將包括在內。 比方說，「從 9.0.0 到 9.2.0」，包括著9.0.0版、9.1.0版和 9.2.0版。
+
+Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). 若系統版本結尾為「-0」，這就表示您系統並未安裝瀏覽器；若為任何其他大於「-0」的數字，這就表示您系統已安裝瀏覽器。
-{% capture notice-1 %}
-表格的最後兩列可以參考您系統版本結尾的數字（此為系統安裝的瀏覽器版本）。 若系統版本結尾為「-0」，這就表示您系統並未安裝瀏覽器；若為任何其他大於「-0」的數字，這就表示您系統已安裝瀏覽器。
-
-在「從」和「到」區域中的任何版本將包括在內。 比方說，「從 9.0.0 到 9.2.0」，包括著9.0.0版、9.1.0版和 9.2.0版。
-
舉例來說，版本 5.0.0-0U 將到「無瀏覽器」行及「5.0.0 到 5.1.0」列，因為此系統版本是在 5.0.0 到 5.1.0 間，且沒有安裝網頁瀏覽器。
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
所有系統版本都可以透過[卡帶更新](cart-update)中所提到的步驟以升級至更新的版本。
-{: .notice--info}
-
-{% capture notice-1 %}
-
-請注意，卡帶更新只會更新系統的核心組件，像是系統設定、HOME 主選單等。 卡帶更新不會更新「任天堂 3DS 音樂（Nintendo 3DS Sound）」程式或是線上下載的功能，如軟體和資料轉移、網頁瀏覽器、擦身通信 Mii 廣場、或是電子商店（eShop）。
-
-這也就是說，如果本身系統版本有安裝較舊版的「任天堂 3DS 音樂（Nintendo 3DS Sound）」程式*（歐、日、韓、及美版的舊型 3DS 的版本為 <7.0.0）*且透過含有較新版本音樂撥放器的卡帶進行更新，[Soundhax](homebrew-launcher-(soundhax)) 漏洞將無法正常執行！ 您將會需要透過[另一個方法](homebrew-launcher-(alternatives))才能使用 Homebrew Launcher。
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
-如果您的卡帶含有 9.9.0 或以上的系統版本，您的瀏覽器會被刪除，而您將得遵守「無瀏覽器」的那列使用。*（意思就是說，您的版本是 9.9.0 或以上版本，但您的瀏覽器版本是 -25 或更低版的話，像是 10.2.0-24）*
-{: .notice--warning}
主機版本可以在「系統設置（System Settings）」中的上方螢幕的右下角找到。
-{: .notice--success}
{: .notice--info}
+如果您的卡帶含有 9.9.0 或以上的系統版本，您的瀏覽器會被刪除，而您將得遵守「無瀏覽器」的那列使用。*（意思就是說，您的版本是 9.9.0 或以上版本，但您的瀏覽器版本是 -25 或更低版的話，像是 10.2.0-24）*
+{: .notice--warning}
+
\ No newline at end of file
diff --git a/_pages/zh_TW/get-started.txt b/_pages/zh_TW/get-started.txt
index 4304d037d8..7528a1eaae 100644
--- a/_pages/zh_TW/get-started.txt
+++ b/_pages/zh_TW/get-started.txt
@@ -2,23 +2,14 @@
title: "從頭開始"
---
-本頁面將帶領您安裝 boot9strap 至*原廠尚未改機*的 3DS 或 2DS 上。 如果您先前已經安裝了 arm9loaderhax 而且您想要更新至 boot9strap，請依照[A9LH 至 boot9strap](a9lh-to-b9s) 的步驟進行。
-{: .notice--primary}
+Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. 下面一系列的頁面將會幫助您針對您的主機找到適合的開始方案。
-圖中主機的顏色可能與您的不一，請仔細觀察圖中的按鈕配置及特徵以確保您選擇的是正確的機型。
-{: .notice}
-
-請點擊對應您主機的圖片以帶您到相應的教學中。
-{: .notice--primary}
-
-不同的主機型號、系統版本、及區域皆有不同的步驟來安裝基於 boot9strap 的自製韌體。 下面一系列的頁面將會幫助您針對您的主機找到適合的開始方案。
-{: .notice--info}
+請點擊對應您主機的圖片以帶您到相應的教學中。 圖中主機的顏色可能與您的不一，請仔細觀察圖中的按鈕配置及特徵以確保您選擇的是正確的機型。
如果您先前已改機過，且已經安裝了基於 EmuNAND 的自製韌體，請在 SysNAND 上進行本教學的所有操作。 您的資料最終將會從 EmuNAND 移植到您新的 B9S 系統上。
-{: .notice--info}
-本手冊中的截圖可輕觸放大。
-{: .notice--info}
+本頁面將帶領您安裝 boot9strap 至*原廠尚未改機*的 3DS 或 2DS 上。 如果您先前已經安裝了 arm9loaderhax 而且您想要更新至 boot9strap，請依照[A9LH 至 boot9strap](a9lh-to-b9s) 的步驟進行。
+{: .notice--primary}
在開始之前，Windows 使用者應該先透過[顯示副檔名 (Windows)](file-extensions-(windows))教學將副檔名顯示！
{: .notice--info}
@@ -26,10 +17,6 @@ title: "從頭開始"
在開始前，建議先透過 [H2testw (Windows)](h2testw-(windows))、[F3 (Linux)](f3-(linux))、或 [F3X (Mac)](f3x-(mac)) 來檢查您主機的 SD 卡有沒有問題！
{: .notice--warning}
-新的 [ntrboothax](installing-boot9strap-(ntrboothax))
- 及[硬改](installing-boot9strap-(hardmod))方法對*所有主機、 地區和版本*皆有效！ 這包括了以前無法破解的中版和台版地區主機！
-{: .notice--success}
-
{% capture notice-1 %}
近日有許多的自製韌體用戶已經被任天堂封殺。 為了自保，請在遵循本教學前進行以下防護措施：
diff --git a/_pages/zh_TW/godmode9-usage.txt b/_pages/zh_TW/godmode9-usage.txt
index 1815f9455a..549cc50d17 100644
--- a/_pages/zh_TW/godmode9-usage.txt
+++ b/_pages/zh_TW/godmode9-usage.txt
@@ -3,14 +3,12 @@ title: "如何使用 GodMode9 "
---
GodMode9 是可以完全存取任天堂 3DS 主機的文件瀏覽器，您可以用它存取 SD 卡以及您 SysNAND 和 EmuNAND 內的 FAT 磁區以及更多。 除了其他功能外，您還能透過它複製、刪除、重新命名檔案以及建立資料夾。
-{: .notice--primary}
請注意，如果您在 SD 卡中的 `/luma/payloads/` 資料夾中放有除了 `GodMode9.firm` 的 payload 檔案，在開機時按住「Start」鍵將會顯示一個「加載選單」，從那裏你得透過方向鍵及按鈕「A」選擇「GodMode9」。
-{: .notice--info}
{% capture notice %}
這玩意非常強大，他能針對 3DS 主機上的系統資料進行各式各樣的修改。 但是別擔心，它採取了各式的預防措施，避免您不小心損壞主機中的資料。
-
+
它的「寫入權限系統」會透過各式警告來保護您，並強制您輸入啟用寫入權限的按鍵組合。 您不可能在沒有輸入按鍵組合的情況下覆蓋或修改任何重要的東西，且不可能無意地解鎖某些東西。 不過以防萬一，還是別做傻事，在進行任何變更前先存好備份。
{% endcapture %}
diff --git a/_pages/zh_TW/h2testw-(windows).txt b/_pages/zh_TW/h2testw-(windows).txt
index ba236d585c..577f5317fb 100644
--- a/_pages/zh_TW/h2testw-(windows).txt
+++ b/_pages/zh_TW/h2testw-(windows).txt
@@ -3,13 +3,10 @@ title: "H2testw (Windows)"
---
本篇為透過 h2testw 來檢查您 SD 卡是否有任何問題的附加章節。
-{: .notice--info}
根據您的 SD 卡的大小和電腦的速度，本過程可能將花費數小時才能完成 ！
-{: .notice--info}
本教學僅適用於 Windows 使用者。 如果您不在 Windows 平台上，請參閱 [F3 (linux)](f3-(linux)) 或 [F3X (mac)](f3x-(mac))。
-{: .notice--info}
#### 必備項目
diff --git a/_pages/zh_TW/home.txt b/_pages/zh_TW/home.txt
index 1d978861b6..e47cb3145a 100644
--- a/_pages/zh_TW/home.txt
+++ b/_pages/zh_TW/home.txt
@@ -37,7 +37,7 @@ excerpt: "最完整的 3DS 改機教戰手冊，
教您如何從原廠主
**自製韌體** （CFW）可以做些使用者空間中自製程式無法輕易做到的更高階的修改及破解。 例如，簽證補丁（Signature patches）可以安裝讓任一未簽證的程式到您的主選單上。
-在主機版本 11.5.0 或之前的系統上安裝自製韌體是再簡單不過的了。
+CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
## 本手冊將安裝些什麼？
diff --git a/_pages/zh_TW/homebrew-launcher-(alternatives).txt b/_pages/zh_TW/homebrew-launcher-(alternatives).txt
index 8bd410e0d8..5d91c0154d 100644
--- a/_pages/zh_TW/homebrew-launcher-(alternatives).txt
+++ b/_pages/zh_TW/homebrew-launcher-(alternatives).txt
@@ -3,13 +3,10 @@ title: "Homebrew Launcher（透過其他方法）"
---
Homebrew Launcher 有許多不同的進入點或啟動方法。
-{: .notice--info}
如果您無法使用 browserhax（見下表）、或目前沒有任何底下所列的遊戲、或另一台可以使用 Homebrew Launcher 的主機，最便宜的方法大概就是買「任天堂之選」版本的[《薩爾達傳說時之笛 3D》](https://amzn.to/2fkaKdp)（請確保您所購買的卡帶符合您主機的區碼）以及[Powersaves](https://amzn.to/2fb3VY7)（所有區碼皆相容），然後再使用底下所列的 oot3dhax。
-{: .notice--info}
請確保您主機的無線通訊功能已經開啟，因為 udsploit（將於下一頁使用）將需要它才能使用，某些主機（New 3DS、New 2DS、舊型 2DS）無法從 Homebrew Launcher 中調整無線通信設置。 只需要將無線網路啟動即可；不須連接至任何網路或熱點。
-{: .notice--info}
#### 必備項目
diff --git a/_pages/zh_TW/homebrew-launcher-(soundhax).txt b/_pages/zh_TW/homebrew-launcher-(soundhax).txt
index 08a9849ef3..f8a85c252d 100644
--- a/_pages/zh_TW/homebrew-launcher-(soundhax).txt
+++ b/_pages/zh_TW/homebrew-launcher-(soundhax).txt
@@ -3,18 +3,15 @@ title: "Homebrew Launcher（透過 Soundhax）"
---
Homebrew Launcher 可以透過不同的進入點或方式開啟。
-{: .notice--info}
Soundhax 相容於 9.0.0 至 11.3.0 的歐、日、韓及美區的系統版本。
-{: .notice--info}
請確保您主機的無線通訊功能已經開啟，因為 udsploit（將於下一頁使用）將需要它才能使用，某些主機（New 3DS、New 2DS、舊型 2DS）無法從 Homebrew Launcher 中調整無線通信設置。 另外，您只需要將無線通訊功能開啟即可；不需要連接至任何的無線基地台。
-{: .notice--info}
{% capture notice-1 %}
請注意，卡帶更新只會更新系統的核心組件，像是系統設定、HOME 主選單等。 卡帶更新不會更新「任天堂 3DS 音樂（Nintendo 3DS Sound）」程式或是線上下載的功能，如軟體和資料轉移、網頁瀏覽器、擦身通信 Mii 廣場、或是電子商店（eShop）。
-
+
這也就是說，如果本身系統版本有安裝較舊版的「任天堂 3DS 音樂（Nintendo 3DS Sound）」程式*（歐、日、韓、及美版的舊型 3DS 的版本為 <7.0.0）*且透過含有較新版本音樂撥放器的卡帶進行更新，[Soundhax](homebrew-launcher-(soundhax)) 漏洞將無法正常執行！ 您將會需要透過[另一個方法](homebrew-launcher-(alternatives))才能使用 Homebrew Launcher。
{% endcapture %}
diff --git a/_pages/zh_TW/installing-boot9strap-(browser).txt b/_pages/zh_TW/installing-boot9strap-(browser).txt
index e9b658bd53..16793a8187 100644
--- a/_pages/zh_TW/installing-boot9strap-(browser).txt
+++ b/_pages/zh_TW/installing-boot9strap-(browser).txt
@@ -3,7 +3,6 @@ title: "安裝 boot9strap（透過網頁瀏覽器）"
---
如果您先前已改機過，且已安裝基於 EmuNAND 的自製系統－請注意，本教學是專門用來處理 SysNAND 的。您應在閱讀本手冊時在 SysNAND 中操作，或將其套用至 SysNAND 中。 注意 EmuNAND 與 RedNAND 指的是些微不同運作方式但[同樣道理](http://3dbrew.org/wiki/NAND_Redirection)的用語。
-{: .notice--info}
#### 必備項目
diff --git a/_pages/zh_TW/installing-boot9strap-(dsiware).txt b/_pages/zh_TW/installing-boot9strap-(dsiware).txt
index c5e6cf7e92..3d735b4afa 100644
--- a/_pages/zh_TW/installing-boot9strap-(dsiware).txt
+++ b/_pages/zh_TW/installing-boot9strap-(dsiware).txt
@@ -3,36 +3,24 @@ title: "安裝 boot9strap（透過 DSiWare）"
---
目前有兩種不同方法可以在系統版本 11.5.0 上透過 DSiWare 安裝 boot9strap。
-{: .notice--info}
其中一種方法只適用於已經不在 電子商店（eShop） 上銷售的四款特定遊戲，而另外一種方法所用的許多遊戲仍然在 電子商店（eShop） 上。
-{: .notice--info}
這兩種方法皆須用到兩台主機。 其中一台 3DS（或 2DS）必須已安裝某種自製韌體（如 boot9strap 或 arm9loaderhax），我們將其稱為*3DS 始源機*；另一台 3DS（或2DS）必須仍在原廠系統上且搭載版本 11.5.0，我們將其稱為 *3DS 目標機*。
-{: .notice--info}
-
-兩台的系統區域必須一致。
-{: .notice--warning}
這兩種方法都將假定運行自製韌體的 3DS 已經搭載 boot9strap 或 arm9loaderhax，並已依照本手冊完成改機。 雖然說這兩種方式在其他自製韌體上是可行的，但我們將不在本教學中涵蓋那些部分。
-{: .notice--info}
這兩種方式都是透過「FIRM partitions known-plaintext」漏洞（詳情請見[此](https://www.3dbrew.org/wiki/3DS_System_Flaws)）所達成的；本漏洞可讓 DSiWare 程式任意的在已加密的 NAND 中讀寫。
-{: .notice--info}
-{% capture notice-4 %}
這兩種方法皆需要您透過[軟體和資料轉移（System Transfer）](http://en-americas-support.nintendo.com/app/answers/detail/a_id/13996/)將 3DS 始源機的系統移至 3DS 目標機上。 軟體和資料轉移**只能**在下列的情況下使用：
+ New 3DS 或 New 2DS -> New 3DS 或 New 2DS
+ 舊型 3DS 或 舊型 2DS -> 舊型 3DS or 舊型 2DS
- + 舊型 3DS 或 舊型 2DS -> New 3DS or New 2DS
-{% endcapture %}
+ + 舊型 3DS 或 舊型 2DS -> New 3DS or New 2DS
-{{ notice-4 | markdownify }}
+兩台的系統區域必須一致。
+{: .notice--warning}
-除非您軟體和資料轉移回來或送回任天堂維修，3DS 始源機的 NNID 會移植到 3DS 目標機上面！ （詳情請參見教程）
-{: .notice--danger}
-
-每個 NNID 只能每隔一個禮拜執行一次軟體和資料轉移。
+In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! 每個 NNID 只能每隔一個禮拜執行一次軟體和資料轉移。
{: .notice--danger}
___
@@ -40,7 +28,7 @@ ___
{% capture notice-1 %}
[安裝 boot9strap（透過 DSiWare 植入存檔）](installing-boot9strap-(dsiware-save-injection))
-
+
本方法需要 3DS 始源機已購買下列任一正版遊戲：
+《堅守陣地（Fieldrunners）》
@@ -57,9 +45,9 @@ ___
{% capture notice-1 %}
[安裝 boot9strap（透過 DSiWare 植入遊戲）](installing-boot9strap-(dsiware-game-injection))
-
+
本方法需要 3DS 始源機購買或已購買[安裝 boot9strap（透過 DSiWare 植入遊戲－遊戲清單）](installing-boot9strap-(dsiware-game-injection-list))表中所列的任一正版遊戲。
-
+
盜版的遊戲將*無法使用*。
{% endcapture %}
diff --git a/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection).txt b/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection).txt
index 4ffcfddc5e..34316ae886 100644
--- a/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection).txt
@@ -3,19 +3,19 @@ title: "安裝 boot9strap（透過 DSiWare 植入遊戲）"
---
請注意，如果您在 SD 卡中的 `/luma/payloads/` 資料夾中放有除了 `GodMode9.firm` 的 payload 檔案，在開機時按住「Start」鍵將會顯示一個「加載選單」，從那裏你得透過方向鍵及按鈕「A」選擇「GodMode9」。
-{: .notice--info}
本頁面會有些許的[磁力](https://en.wikipedia.org/wiki/Magnet_URI_scheme)連結，您將需要個像 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 的 BT 種子下載器來下載磁力連結的檔案。
-{: .notice--success}
在繼續之前，請確保您已閱讀[安裝 boot9strap（透過 DSiWare）](installing-boot9strap-(dsiware))中的提示及警告
+
+如果您不使用符合 3DS 目標機的 `.firm` 檔案，保證會磚機！ 請確保您下載並使用正確的檔案！
{: .notice--danger}
#### 必備項目
-* 兩台 3DS 主機
- + **3DS 始源機**：已搭載某種*最新版本*自製韌體的 3DS （如 arm9loaderhax 或 boot9strap）
- + **3DS 目標機**：已搭載原廠系統*版本 11.5.0* 的 3DS
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* 透過 電子商店（eShop） 購買 （或已擁有）相容的 DSiWare 遊戲至 **3DS 始源機** 上
+ **不能使用**盜版遊戲
+ 若想見所有相容遊戲之清單，請見[安裝 boot9strap（透過 DSiWare 植入遊戲－遊戲清單）](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection-list).txt
index 1b439f2b05..24086b3d6f 100644
--- a/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -3,19 +3,12 @@ title: "安裝 boot9strap（透過 DSiWare 植入遊戲－遊戲清單）"
---
以下是所有與[安裝 boot9strap（透過 DSiWare）](installing-boot9strap-(dsiware))相容的遊戲清單（自動生成）。
-{: .notice--primary}
-本清單是依遊戲區碼來分段的，順序為美、歐、日。
-{: .notice--info}
-
-每個部分是按昇冪價格排序的。
-{: .notice--info}
+本清單是依遊戲區碼來分段的，順序為美、歐、日。 每個部分是按昇冪價格排序的。
二維碼可在 HOME 主選單中按下「L」+「R」鍵掃描，然後在底下的螢幕中輕觸二維碼圖示。
-{: .notice--info}
-會有大小要求限制是因為植入後的 DSiWare 遊戲以及修改後的存檔大小得要與原本的相同才能正常的經過軟體和資料轉移到另一台主機中；也就是說犧牲用的 DSiWare 遊戲必須要夠大才能裝得下駭過的遊戲。
-{: .notice--info}
+The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
{% capture notice-list %}
diff --git a/_pages/zh_TW/installing-boot9strap-(dsiware-save-injection).txt b/_pages/zh_TW/installing-boot9strap-(dsiware-save-injection).txt
index 1d45bbed64..70c7a41535 100644
--- a/_pages/zh_TW/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/zh_TW/installing-boot9strap-(dsiware-save-injection).txt
@@ -3,22 +3,19 @@ title: "安裝 boot9strap（透過 DSiWare 植入存檔）"
---
請注意，如果您在 SD 卡中的 `/luma/payloads/` 資料夾中放有除了 `GodMode9.firm` 的 payload 檔案，在開機時按住「Start」鍵將會顯示一個「加載選單」，從那裏你得透過方向鍵及按鈕「A」選擇「GodMode9」。
-{: .notice--info}
本頁面會有些許的[磁力](https://en.wikipedia.org/wiki/Magnet_URI_scheme)連結，您將需要個像 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 的 BT 種子下載器來下載磁力連結的檔案。
-{: .notice--success}
在繼續之前，請確保您已閱讀[安裝 boot9strap（透過 DSiWare）](installing-boot9strap-(dsiware))中的提示及警告
-{: .notice--danger}
如果您不使用符合 3DS 目標機的 `.firm` 檔案，保證會磚機！ 請確保您下載並使用正確的檔案！
{: .notice--danger}
#### 必備項目
-* 兩台 3DS 主機
- + **3DS 始源機**：已搭載某種*最新版本*自製韌體的 3DS （如 arm9loaderhax 或 boot9strap）
- + **3DS 目標機**：已搭載原廠系統*版本 11.5.0* 的 3DS
+* Two 3DS family devices
+ + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+ + **The target 3DS**: the device on stock firmware *on 11.5.0*
* 已經於 **3DS 始源機** 上擁有並安裝以下任意可執行漏洞的 DSiWare 遊戲（盜版遊戲是**無法使用**的）
+ **《堅守陣地（Fieldrunners）》**
+ **《Legends of Exidia》**
diff --git a/_pages/zh_TW/installing-boot9strap-(hardmod).txt b/_pages/zh_TW/installing-boot9strap-(hardmod).txt
index 621fef191b..ba2e1222f4 100644
--- a/_pages/zh_TW/installing-boot9strap-(hardmod).txt
+++ b/_pages/zh_TW/installing-boot9strap-(hardmod).txt
@@ -3,16 +3,12 @@ title: "安裝 boot9strap（透過硬改）"
---
您可以在[這裡](https://gbatemp.net/threads/414498/)找到硬改的相關資訊。 如果您的主機型號為 New 3DS，請在硬改前閱讀[這篇](https://github.com/Plailect/Guide/issues/681)及[這篇](https://github.com/Plailect/Guide/issues/1185)文章。
-{: .notice--info}
此方法是透過「FIRM partitions known-plaintext」漏洞所達成的。詳情請見[此](https://www.3dbrew.org/wiki/3DS_System_Flaws)。
-{: .notice--info}
本頁面會有些許的[磁力](https://en.wikipedia.org/wiki/Magnet_URI_scheme)連結，您將需要個像 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 的 BT 種子下載器來下載磁力連結的檔案。
-{: .notice--success}
只要有對應的 `.firm` 檔案，此方法將適用於*所有版本的* New 3DS、舊型 3DS、New 2DS、舊型 2DS。
-{: .notice--success}
#### 必備項目
diff --git a/_pages/zh_TW/installing-boot9strap-(homebrew-launcher).txt b/_pages/zh_TW/installing-boot9strap-(homebrew-launcher).txt
index 7414a31cab..d07edbbd4c 100644
--- a/_pages/zh_TW/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/zh_TW/installing-boot9strap-(homebrew-launcher).txt
@@ -3,7 +3,6 @@ title: "安裝 boot9strap（透過 Homebrew Launcher）"
---
如果您先前已改機過，且已安裝基於 EmuNAND 的自製系統－請注意，本教學是專門用來處理 SysNAND 的。您應在閱讀本手冊時在 SysNAND 中操作，或將其套用至 SysNAND 中。 注意 EmuNAND 與 RedNAND 指的是些微不同運作方式但[同樣道理](http://3dbrew.org/wiki/NAND_Redirection)的用語。
-{: .notice--info}
#### 操作說明
@@ -20,6 +19,8 @@ title: "安裝 boot9strap（透過 Homebrew Launcher）"
+ 如果還是遇到了「PM INIT FAILED」錯誤訊息的話，請試試看使用 [r19 版的 safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ 如果當機的話，按住電源紐強制重啟您的主機再試一次即可
1. 如果一切成功的話，您將自動進入 SafeB9SInstaller
+ + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
+ + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
##### 第二節 — 安裝 boot9strap
diff --git a/_pages/zh_TW/installing-boot9strap-(mset).txt b/_pages/zh_TW/installing-boot9strap-(mset).txt
index 19badc1302..001aa4ed03 100644
--- a/_pages/zh_TW/installing-boot9strap-(mset).txt
+++ b/_pages/zh_TW/installing-boot9strap-(mset).txt
@@ -3,7 +3,6 @@ title: "安裝 boot9strap（透過 MSET）"
---
如果您先前已改機過，且已安裝基於 EmuNAND 的自製系統－請注意，本教學是專門用來處理 SysNAND 的。您應在閱讀本手冊時在 SysNAND 中操作，或將其套用至 SysNAND 中。 注意 EmuNAND 與 RedNAND 指的是些微不同運作方式但[同樣道理](http://3dbrew.org/wiki/NAND_Redirection)的用語。
-{: .notice--info}
#### 必備項目
diff --git a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
new file mode 100644
index 0000000000..12823829fe
--- /dev/null
+++ b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (ntrboot)"
+---
+
+#### 必備項目
+
+* A magnet that triggers the sleep mode of your device (if using a folding style device)
+* Your ntrboot flashed flashcart
+* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案）*
+* 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)*
+* 自製軟體[入門套件](http://smealum.github.io/ninjhax2/starter.zip)
+
+#### 操作說明
+
+##### 第一節 — 準備工作
+
+1. 關閉您的主機
+1. 將 SD 卡插入電腦中
+1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. 複製`starter.zip`裡的 _所有內容_ 到 SD 卡的根目錄底下
+1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap`
+1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中
+
+ 
+ {: .notice--info}
+
+1. 將 SD 卡插回主機中
+1. 啟動您的主機
+
+##### Section II - ntrboot
+
+1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ + This step is not needed on non-folding style devices (such as the old 2DS)
+1. 關閉您的主機
+1. Insert your flashcart into your device
+1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+ + It may take a few attempts to get this to work because the positioning is awkward
+1. 如果一切成功的話，您將自動進入 SafeB9SInstaller
+
+##### 第三節 — 安裝 boot9strap
+
+1. 等待所有安全性檢查完畢
+1. 出現提示時，輸入提示的按鍵組合以安裝 boot9strap
+1. Once it has completed, force your device to power off by holding down the power button
+ + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+
+##### 第四節 — 設定 Luma3DS
+
+1. 將 SD 卡插入電腦中
+1. Delete `boot.firm` from the root of your SD card
+1. 解壓 Luma3DS `.7z` 內的 `boot.firm` 到 SD 卡的根目錄底下
+1. 將 SD 卡插回主機中
+1. 啟動您的主機
+1. 您的主機將會啟動至 Luma3DS 設定選單中
+ + 如果黑屏，[請參見此疑難排解](troubleshooting#ts_sys_b9s)
+1. 透過方向鍵及「A」以開啟下列選項：
+ + **「Show NAND or user string in System Settings」**
+1. 按下「Start」鍵以存檔並重新啟動系統
+ + 如果你遇到了錯誤訊息，繼續到下一頁即可
+
+___
+
+繼續至 [完成安裝](finalizing-setup)
+{: .notice--primary}
+
+___
+
+##### Section V - Removing ntrboot
+
+This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+{: .notice--info}
+
+Do not follow this section until you have completed the rest of the instructions on this page.
+{: .notice--warning}
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+1. Select "ntrboot_flasher"
+1. Select "Restore Flash"
+1. Press (Y) to proceed
+1. 等到檢查完畢為止。
+1. 按「B」回到主選單
+1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
diff --git a/_pages/zh_TW/move-emunand.txt b/_pages/zh_TW/move-emunand.txt
index ce0c577b08..6850a1a257 100644
--- a/_pages/zh_TW/move-emunand.txt
+++ b/_pages/zh_TW/move-emunand.txt
@@ -3,10 +3,8 @@ title: "移植 EmuNAND"
---
本篇為如何把先前的 EmuNAND 中的內容移植到您新的自製 SysNAND 系統底下，並移除舊的 EmuNAND 磁區的附加章節。 注意 EmuNAND 與 RedNAND 指的是些微不同運作方式但[同樣道理](http://3dbrew.org/wiki/NAND_Redirection)的用語。
-{: .notice--info}
-請注意，如果您在 SD 卡中的 `/luma/payloads/` 資料夾中放有除了 `GodMode9.firm` 的 payload 檔案，在開機時按住「Start」鍵將會顯示一個「加載選單」，從那裏你得透過方向鍵及按鈕「A」選擇「GodMode9」。
-{: .notice--info}
+請注意，如果您在 SD 卡中的 `/luma/payloads/` 資料夾中放有除了 `GodMode9.firm` 的 payload 檔案，在開機時按住「Start」鍵將會顯示一個「加載選單」，從那裏你得透過方向鍵及按鈕「A」選擇「GodMode9」。
**您必須先安裝 Luma3DS 和 boot9strap 或 arm9loaderhax 才能繼續。**
{: .notice--danger}
diff --git a/_pages/zh_TW/ntr-and-cubic-ninja.txt b/_pages/zh_TW/ntr-and-cubic-ninja.txt
index 09db5985ce..218b12a143 100644
--- a/_pages/zh_TW/ntr-and-cubic-ninja.txt
+++ b/_pages/zh_TW/ntr-and-cubic-ninja.txt
@@ -3,9 +3,8 @@ title: "NTR 韌體及《方塊忍者》"
---
本頁面會有些許的[磁力](https://en.wikipedia.org/wiki/Magnet_URI_scheme)連結，您將需要個像 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 的 BT 種子下載器來下載磁力連結的檔案。
-{: .notice--success}
-**NTR《方塊忍者》僅適用於日版的 New 3DS！**
+NTR Cubic Ninja will work for JPN New 3DS ONLY!
{: .notice--warning}
#### 必備項目
diff --git a/_pages/zh_TW/ntrboot.txt b/_pages/zh_TW/ntrboot.txt
new file mode 100644
index 0000000000..45750a7535
--- /dev/null
+++ b/_pages/zh_TW/ntrboot.txt
@@ -0,0 +1,45 @@
+---
+title: "ntrboot"
+---
+
+If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+{: .notice--success}
+
+Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+
+ + [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ + [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
+
+There are two different methods of flashing ntrboot to your flashcart.
+
+Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+
+To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+{: .notice--info}
+
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+{: .notice--danger}
+
+___
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+
+This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+{% capture notice-1 %}
+
+[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
\ No newline at end of file
diff --git a/_pages/zh_TW/region-changing.txt b/_pages/zh_TW/region-changing.txt
index 3503aa8da1..2640917b57 100644
--- a/_pages/zh_TW/region-changing.txt
+++ b/_pages/zh_TW/region-changing.txt
@@ -3,16 +3,12 @@ title: "區碼變更"
---
本篇為更改自製韌體區碼的附加章節。 這是透過安裝所選區域的 9.2.0 CTRTransfer 鏡像檔達成的。
-{: .notice--primary}
-**區碼變更通常是不需要的，因為 Luma3DS 本身就支援跨區遊玩及各[程式區域模擬](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage)的功能。**
-{: .notice--info}
+Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
本頁面會有些許的[磁力](https://en.wikipedia.org/wiki/Magnet_URI_scheme)連結，您將需要個像 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 的 BT 種子下載器來下載磁力連結的檔案。
-{: .notice--success}
請注意，如果您在 SD 卡中的 `/luma/payloads/` 資料夾中放有除了 `GodMode9.firm` 的 payload 檔案，在開機時按住「Start」鍵將會顯示一個「加載選單」，從那裏你得透過方向鍵及按鈕「A」選擇「GodMode9」。
-{: .notice--info}
本過程將解除您系統與 NNID 間的綁定，因為在改變區域後它們將不再兼容。 NNID 在創建後就會被鎖定至當前主機所在的區域，除非透過[一個非常複雜且進階的流程](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt)，不然 NNID 不能在區域間遷移。
{: .notice--warning}
@@ -20,19 +16,14 @@ title: "區碼變更"
區碼變更後，只有在**從未使用過 電子商店（eShop） 的 New 3DS** 及 **任意舊型 3DS** 上才能在新的區域中創建一個新的 NNID 並使用 電子商店（eShop）。 已經在原區域使用過 電子商店（eShop） 的 New 3DS 將無法創建新的 NNID 或在新區域中使用 電子商店（eShop）！
{: .notice--warning}
-注意有時候 電子商店（eShop） 還是沒辦法在應該可以使用的主機上使用。 這部分就是任天堂伺服器那邊的問題了，我沒辦法解決。
-{: .notice--warning}
-
-類似上面所提到的警示，有時候 電子商店（eShop） 突然會在正常來說不能使用的主機上（比如說某些 New 3DS 主機）變得可以使用。 目前原因仍未知。
-{: .notice--warning}
+注意有時候 電子商店（eShop） 還是沒辦法在應該可以使用的主機上使用。 這部分就是任天堂伺服器那邊的問題了，我沒辦法解決。 Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). 目前原因仍未知。
透過 CTRTransfer 所達成的區碼變更似乎會使重啟補丁失效。 目前原因還尚待了解中，總之目前舊型 3DS 的玩家將無法遊玩需要用到「額外記憶體模式」的遊戲（像是《魔物獵人》、《任天堂明星大亂鬥》、或《神奇寶貝太陽／月亮版》...等）直到您格式化主機為止。
-{: .notice--warning}
-千萬不要在低於版本 11.4.0 的 New 2DS 上格式化，否則你將無法完成初始設置！
+Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
{: .notice--danger}
-**您必須先安裝 Luma3DS 和 boot9strap 或 arm9loaderhax 才能繼續。**
+You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
{: .notice--danger}
#### 必備項目
diff --git a/_pages/zh_TW/site-navigation.txt b/_pages/zh_TW/site-navigation.txt
index c5f997c4be..9150218a6c 100644
--- a/_pages/zh_TW/site-navigation.txt
+++ b/_pages/zh_TW/site-navigation.txt
@@ -26,6 +26,8 @@ sitemap: false
+ [常見問題 FAQ](faq)
+ [檔案副檔名 (Windows)](file-extensions-(windows))
+ [完成安裝](finalizing-setup)
++ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [從頭開始 (New 3DS)](get-started-(new-3ds))
+ [從頭開始 (舊型 3DS)](get-started-(old-3ds))
+ [從頭開始](get-started)
@@ -41,7 +43,7 @@ sitemap: false
+ [安裝 boot9strap（透過硬改）](installing-boot9strap-(hardmod))
+ [安裝 boot9strap（透過 Homebrew Launcher）](installing-boot9strap-(homebrew-launcher))
+ [安裝 boot9strap（透過 MSET）](installing-boot9strap-(mset))
-+ [安裝 boot9strap（透過 ntrboothax）](installing-boot9strap-(ntrboothax))
++ [ntrboot](ntrboot)
+ [移植 EmuNAND](move-emunand)
+ [NTR 韌體及《方塊忍者》](ntr-and-cubic-ninja)
+ [區碼變更](region-changing)
diff --git a/_pages/zh_TW/troubleshooting.txt b/_pages/zh_TW/troubleshooting.txt
index 4370f4b0b1..b76023469b 100644
--- a/_pages/zh_TW/troubleshooting.txt
+++ b/_pages/zh_TW/troubleshooting.txt
@@ -4,13 +4,10 @@ title: "疑難排解"
如果您的主機無法開機，請在這裡尋找可能相關的章節並照著步驟走。 問題解決後再繼續讀完本教學
（本章節比較長一些，建議透過 CTRL+F 來找尋您的問題）。
-{: .notice--primary}
-**如果您仍無法解決您的問題，且需要幫助，請將 SD 卡根目錄底下的 .log 檔案做成一個 [Gist](https://gist.github.com/)，然後再去找人並跟他詳細地解釋問題所在加上您試了哪些步驟。**
-{: .notice--info}
+If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
本頁面會有些許的[磁力](https://en.wikipedia.org/wiki/Magnet_URI_scheme)連結，您將需要個像 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 的 BT 種子下載器來下載磁力連結的檔案。
-{: .notice--success}
## DSi / DS 的相關功能在完成本手冊步驟後無法使用
diff --git a/_pages/zh_TW/uninstall-cfw.txt b/_pages/zh_TW/uninstall-cfw.txt
index 7bd6fb2c79..433802d9f1 100644
--- a/_pages/zh_TW/uninstall-cfw.txt
+++ b/_pages/zh_TW/uninstall-cfw.txt
@@ -3,16 +3,12 @@ title: "卸載自製韌體"
---
本章節將從您的主機中完全移除自製韌體。為了將主機完全地回復至原廠設定，包括 Boot9Strap、Luma3DS 將被移除。
-{: .notice--danger}
您將無法遊玩任何已安裝且未簽證（盜版）的遊戲；您可至系統設定的資料管理中將它們刪除。 建議您先使用[存檔管理器](https://github.com/J-D-K/JKSM/releases/latest)將您較在乎的遊戲存檔備份起來。
-{: .notice--info}
這將不會影響您的 NNID 帳號、正版遊戲、或正版遊戲存檔。
-{: .notice--info}
請注意，如果您在 SD 卡中的 `/luma/payloads/` 資料夾中放有除了 `GodMode9.firm` 的 payload 檔案，在開機時按住「Start」鍵將會顯示一個「加載選單」，從那裏你得透過方向鍵及按鈕「A」選擇「GodMode9」。
-{: .notice--info}
#### 必備項目
diff --git a/_pages/zh_TW/updating-b9s.txt b/_pages/zh_TW/updating-b9s.txt
index 20c94d660c..2f53cad3e3 100644
--- a/_pages/zh_TW/updating-b9s.txt
+++ b/_pages/zh_TW/updating-b9s.txt
@@ -3,10 +3,8 @@ title: "更新 B9S" #
---
本頁面適用於已安裝 boot9strap 且想將其更新至最新版的使用者。
-{: .notice--info}
請注意，最近釋出的新 Luma3DS 版本無法與 boot9strap 1.0 版相容。 你*必須*先透過本頁面將 boot9strap 更新至 1.2 版才能使用它。
-{: .notice--warning}
{% capture notice-1 %}
近日有許多的自製韌體用戶已經被任天堂封殺。 為了自保，請在遵循本教學前進行以下防護措施：