close #1094; close #1093; close #1091; close #1089

This commit is contained in:
Plailect 2017-05-20 11:13:08 -04:00 committed by Plailect
parent 50fdc0e190
commit 9f245a250e
No known key found for this signature in database
GPG key ID: F8A415C5EA602A41
7 changed files with 18 additions and 12 deletions

View file

@ -4,6 +4,9 @@ lang: en
permalink: /get-started.html
---
This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [Updating to boot9strap](updating-to-boot9strap).
{: .notice--primary}
The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
{: .notice}

View file

@ -40,7 +40,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
1. Wait for all safety checks to complete
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, your device will reboot into boot9strap, then shutdown automatically
1. Once it has completed, press (A) to reboot your device
1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
___

View file

@ -152,9 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
1. Select "Install boot9strap" and confirm
1. Exit b9sTool
1. Exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
1. Reboot your device, which will launch boot9strap, then shutdown automatically
1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
___

View file

@ -167,9 +167,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
+ **Guitar Rock Tour**: Scroll down and go to High-Scores -> Drums -> Easy
+ **The Legend of Zelda: Four Swords**: Just start the game
1. Select "Install boot9strap" and confirm
1. Exit b9sTool
1. Exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
1. Reboot your device, which will launch boot9strap, then shutdown automatically
1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
___

View file

@ -50,9 +50,10 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
1. Wait for all safety checks to complete
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, your device will reboot into boot9strap, then shutdown automatically
1. Once it has completed, press (A) to reboot your device
1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
___
Continue to [Finalizing Setup](finalizing-setup)
{: .notice--primary}
{: .notice--primary}

View file

@ -45,7 +45,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
1. Wait for all safety checks to complete
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, your device will reboot into boot9strap, then shutdown automatically
1. Once it has completed, press (A) to reboot your device
1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
___

View file

@ -13,8 +13,8 @@ All future releases of Luma3DS will only be made in the `.firm` format, which wi
If you have a PIN set on Luma, you must temporarily turn it off to do these steps. You can re-enable the PIN after the update.
{: .notice--info}
If you currently use or have previously used the software "3dsafe", you may get an "OTP Crypto Fail" error when attempting to run SafeB9SInstaller. A solution for this error is being looked into, so just be patient.
{: .notice--warning}
If you have the software "3dsafe" installed, you must remove it to do these steps or you will get an "OTP Crypto Fail" error. If you do not have the required files to remove "3dsafe", a method to remove "3dsafe" (without any of its removal files such as `lost.bin` or `sha.bin`) is being looked into, so just be patient.
{: .notice--info}
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
{: .notice--info}
@ -113,10 +113,10 @@ This section is only needed if you are prompted with the Luma3DS configuration m
___
You can now remove any arm9loaderhax related files from your SD card, such as `arm9loaderhax.bin` on the root of your SD card and the `files9` folder on your SD card.
You can now remove any arm9loaderhax related files from your SD card, such as `arm9loaderhax.bin` on the root of your SD card and the `aeskeydb.bin` file in the `files9` folder on your SD card.
{: .notice--info}
Note that `firm0firm1.bak` and `sector0x96.bak` in the `/boot9strap/` folder on your SD card are only needed in the event of a failed boot9strap install. Once you have installed successfully, you can delete these two files.
Note that `firm0firm1.bak` and `sector0x96.bak` in the `/boot9strap/` folder on your SD card are only needed in the event of a failed boot9strap install. Once you have installed successfully, you can delete the entire `boot9strap` folder.
{: .notice--info}
This fork of Luma3DS Updater allows for boot9strap compatibility by downloading and extracting the latest Luma3DS `boot.firm` for you.