diff --git a/_pages/en_US/F3-(Linux).txt b/_pages/en_US/F3-(Linux).txt
index a91696ca72..28a3200e1f 100644
--- a/_pages/en_US/F3-(Linux).txt
+++ b/_pages/en_US/F3-(Linux).txt
@@ -53,7 +53,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes
___
-If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card
+If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on your SD card
{: .notice--success}
If the test shows any other results, your SD card may be corrupted or damaged and you may have to replace it!
diff --git a/_pages/en_US/F3X-(Mac).txt b/_pages/en_US/F3X-(Mac).txt
index 60f8b81769..3eeb2c2046 100644
--- a/_pages/en_US/F3X-(Mac).txt
+++ b/_pages/en_US/F3X-(Mac).txt
@@ -28,7 +28,7 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw (
___
-If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card
+If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on your SD card
{: .notice--success}
If the test shows any other results, your SD card may be corrupted or damaged and you may have to replace it!
diff --git a/_pages/en_US/H2testw-(Windows).txt b/_pages/en_US/H2testw-(Windows).txt
index 34febfd2a0..6da65894bb 100644
--- a/_pages/en_US/H2testw-(Windows).txt
+++ b/_pages/en_US/H2testw-(Windows).txt
@@ -31,7 +31,7 @@ This page is for Windows users only. If you are not on windows, check out the [F
___
-If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card
+If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on your SD card
{: .notice--success}
If the test shows any other results, your SD card may be corrupted or damaged and you may have to replace it!
diff --git a/_pages/en_US/Installing-arm9loaderhax.txt b/_pages/en_US/Installing-arm9loaderhax.txt
index 2ff856de83..f43595a11e 100644
--- a/_pages/en_US/Installing-arm9loaderhax.txt
+++ b/_pages/en_US/Installing-arm9loaderhax.txt
@@ -67,7 +67,8 @@ During this process, we also setup programs such as the following:
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
-1. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files
+1. Copy `arm9loaderhax.bin` from the Luma3D
+S `.7z` to the root of your SD card, overwrite existing files
1. Create a folder named `luma` on the root of your SD card
1. Create a folder named `payloads` in the `luma` folder on your SD card
1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
@@ -181,8 +182,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
1. Press (B) to return to the main menu
1. Hold (R) and press (B) at the same time to eject your SD card
1. Remove your SD card from your device
-1. Press (Start) to reboot your device with the SD card removed
- + Booting your device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation
+1. Press (Start) to reboot your device with your SD card removed
+ + Booting your device at least once with your SD card removed will allow you to configure the CTRNAND based Luma3DS installation
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. If you are using a **New 3DS**, you can *also* enable the following:
@@ -201,7 +202,7 @@ If DSi / DS functionality has broken (such as DS carts or DSiWare no longer work
{% capture notice-10 %}
You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
-This will only update the Luma3DS files on the SD card. If you boot your device without an SD card, it will use the version you placed in CTR NAND.
+This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTR NAND.
{% endcapture %}
{{ notice-10 | markdownify }}
@@ -227,7 +228,7 @@ You can remove your NAND backups from `/files9/` as long as you still have them
{: .notice--info}
{% capture notice-7 %}
-**You can remove any extra files and folders from the root of the SD card that are *not* in the following list:**
+**You can remove any extra files and folders from the root of your SD card that are *not* in the following list:**
+ 3ds
+ DCIM
diff --git a/_pages/en_US/Move-EmuNAND.txt b/_pages/en_US/Move-EmuNAND.txt
index fbf5e4eecf..7a4b7aa76d 100644
--- a/_pages/en_US/Move-EmuNAND.txt
+++ b/_pages/en_US/Move-EmuNAND.txt
@@ -139,7 +139,7 @@ If you did not backup GBA VC Saves earlier, skip this section.
1. When prompted, input the key combo given to confirm
1. Hold (R) and press (B) at the same time to eject your SD card
1. Insert your SD card into your computer, then copy all your files back into it
- + Ensure you replace the `arm9loaderhax.bin` file on the SD card with the one from your backup
+ + Ensure you replace the `arm9loaderhax.bin` file on your SD card with the one from your backup
1. Reinsert your SD card into your device
1. Press (A) to remount your SD card
1. Press (Start) to save and reboot
diff --git a/_pages/en_US/NTR-and-Cubic-Ninja.txt b/_pages/en_US/NTR-and-Cubic-Ninja.txt
index 380d63bed2..26b0ece249 100644
--- a/_pages/en_US/NTR-and-Cubic-Ninja.txt
+++ b/_pages/en_US/NTR-and-Cubic-Ninja.txt
@@ -40,7 +40,7 @@ permalink: /ntr-and-cubic-ninja.html
1. Create a folder named `files9` on the root of your SD card if it does not already exist
1. Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card
1. Copy the `SafeCtrTransferWIP` folder from the SafeCtrTransferWIP `.zip` to `/3ds/` on your SD card
-1. Put the SD card back into your device
+1. Put your SD card back into your device
##### Section II - Updating
diff --git a/_pages/en_US/SafeCtrTransfer-(Browser).txt b/_pages/en_US/SafeCtrTransfer-(Browser).txt
index 418f019d4a..cfa1185e86 100644
--- a/_pages/en_US/SafeCtrTransfer-(Browser).txt
+++ b/_pages/en_US/SafeCtrTransfer-(Browser).txt
@@ -87,7 +87,7 @@ This is accomplished by [installing a premade CtrTransfer image](https://www.red
+ The reboot will take about 2 seconds to trigger
+ While on 2.1.0, your device will black screen on boot if your SD card is inserted before the home menu loads
+ Every time your device is rebooted on 2.1.0, you will need to take out your SD card before boot and put it back in after the home menu loads
- + For now, leave the SD card out as you will be copying files to it in the next page
+ + For now, leave your SD card out as you will be copying files to it in the next page
+ This will be fixed once you restore your device in the next page
___
diff --git a/_pages/en_US/SafeCtrTransfer-(Homebrew-Launcher).txt b/_pages/en_US/SafeCtrTransfer-(Homebrew-Launcher).txt
index dea66ae101..67440e21cd 100644
--- a/_pages/en_US/SafeCtrTransfer-(Homebrew-Launcher).txt
+++ b/_pages/en_US/SafeCtrTransfer-(Homebrew-Launcher).txt
@@ -90,7 +90,7 @@ This is accomplished by [installing a premade CtrTransfer image](https://www.red
+ The reboot will take about 2 seconds to trigger
+ While on 2.1.0, your device will black screen on boot if your SD card is inserted before the home menu loads
+ Every time your device is rebooted on 2.1.0, you will need to take out your SD card before boot and put it back in after the home menu loads
- + For now, leave the SD card out as you will be copying files to it in the next page
+ + For now, leave your SD card out as you will be copying files to it in the next page
+ This will be fixed once you restore your device in the next page
___
diff --git a/_pages/en_US/SafeCtrTransfer-(MSET).txt b/_pages/en_US/SafeCtrTransfer-(MSET).txt
index ec4f18c900..b0fa8e8bd6 100644
--- a/_pages/en_US/SafeCtrTransfer-(MSET).txt
+++ b/_pages/en_US/SafeCtrTransfer-(MSET).txt
@@ -88,7 +88,7 @@ This is accomplished by [installing a premade CtrTransfer image](https://www.red
+ The reboot will take about 2 seconds to trigger
+ While on 2.1.0, your device will black screen on boot if your SD card is inserted before the home menu loads
+ Every time your device is rebooted on 2.1.0, you will need to take out your SD card before boot and put it back in after the home menu loads
- + For now, leave the SD card out as you will be copying files to it in the next page
+ + For now, leave your SD card out as you will be copying files to it in the next page
+ This will be fixed once you restore your device in the next page
___
diff --git a/_pages/en_US/Site-Navigation.txt b/_pages/en_US/Site-Navigation.txt
index a18355b119..9d09aace7f 100644
--- a/_pages/en_US/Site-Navigation.txt
+++ b/_pages/en_US/Site-Navigation.txt
@@ -18,13 +18,9 @@ sitemap: false
{% capture notice-2 %}
**All**
-+ [2.1.0 CtrTransfer](2.1.0-ctrtransfer)
+ [9.2.0 CtrTransfer](9.2.0-ctrtransfer)
+ [Cart Update](cart-update)
+ [Credits](credits)
-+ [SafeCtrTransfer (Browser)](safectrtransfer-(browser))
-+ [SafeCtrTransfer (Homebrew Launcher)](safectrtransfer-(homebrew-launcher))
-+ [SafeCtrTransfer (MSET)](safectrtransfer-(mset))
+ [Donations](donations)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -40,6 +36,9 @@ sitemap: false
+ [Move EmuNAND](move-emunand)
+ [NTR and Cubic Ninja](ntr-and-cubic-ninja)
+ [Region Changing](region-changing)
++ [SafeCtrTransfer (Browser)](safectrtransfer-(browser))
++ [SafeCtrTransfer (Homebrew Launcher)](safectrtransfer-(homebrew-launcher))
++ [SafeCtrTransfer (MSET)](safectrtransfer-(mset))
+ [Troubleshooting](troubleshooting)
+ [Updating A9LH](updating-a9lh)
+ [Why Ads?](why-ads)
diff --git a/_pages/en_US/Troubleshooting.txt b/_pages/en_US/Troubleshooting.txt
index e144c001f0..47fb68ed86 100644
--- a/_pages/en_US/Troubleshooting.txt
+++ b/_pages/en_US/Troubleshooting.txt
@@ -112,7 +112,7 @@ This happens occasionally, but the reason is unknown. The buttons will still wor
1. Try booting with your SD card out, and then reinserting it after booting
1. Power off your device
- 1. Remove the SD card from your device
+ 1. Remove your SD card from your device
1. Power on your device
1. When the home menu appears, reinsert your SD card into your device
1. If this worked, you should clear Home Menu's extdata by navigating to the following folder on your SD card: `/Nintendo 3DS/(32 Character ID)/(32 Character ID)/extdata/00000000/`
diff --git a/_pages/en_US/Updating-A9LH.txt b/_pages/en_US/Updating-A9LH.txt
index 09a84387b9..7727418fb5 100644
--- a/_pages/en_US/Updating-A9LH.txt
+++ b/_pages/en_US/Updating-A9LH.txt
@@ -6,7 +6,7 @@ permalink: /updating-a9lh.html
### Last Update: 3 Nov 2016
-The actual installation of arm9loaderhax itself consists of payload files installed into the NFIRM partitions on your device's NAND chip, which is soldered to the motherboard itself. These payloads are updated rarely and only really serve the purpose of launching `arm9loaderhax.bin` from the SD card, which is, in our case, Luma3DS.
+The actual installation of arm9loaderhax itself consists of payload files installed into the NFIRM partitions on your device's NAND chip, which is soldered to the motherboard itself. These payloads are updated rarely and only really serve the purpose of launching `arm9loaderhax.bin` from your SD card, which is, in our case, Luma3DS.
{: .notice}
If you do not know what version of arm9loaderhax you are running, just install the latest version with these steps. Installing the latest version while already on the latest version will have no effect.
@@ -80,7 +80,8 @@ These steps will also update your various payloads and the AES key database.
1. Reboot holding (Start) during boot to launch GodMode9
1. Navigate to `SDCARD`
1. Press (Y) on `arm9loaderhax.bin` to copy it
-1. Press (B) to return to the main menu
+1. Press (B) to return to
+ the main menu
1. Navigate to `SYSNAND CTRNAND`
1. Press (Y) to paste `arm9loaderhax.bin`
1. Select "Copy path(s)"
@@ -89,8 +90,8 @@ These steps will also update your various payloads and the AES key database.
1. Press (B) to return to the main menu
1. Hold (R) and press (B) at the same time to eject your SD card
1. Remove your SD card from your device
-1. Press (Start) to reboot your device with the SD card removed
- + Booting your device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation
+1. Press (Start) to reboot your device with your SD card removed
+ + Booting your device at least once with your SD card removed will allow you to configure the CTRNAND based Luma3DS installation
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. If you are using a **New 3DS**, you can *also* enable the following: