` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/ar_SA/include/exploit-usm.txt b/_pages/ar_SA/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/ar_SA/include/exploit-usm.txt
+++ b/_pages/ar_SA/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/ar_SA/include/rmproxy.txt b/_pages/ar_SA/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/ar_SA/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/ar_SA/include/safemodecheck.txt b/_pages/ar_SA/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/ar_SA/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/ar_SA/include/sysupdate.txt b/_pages/ar_SA/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/ar_SA/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/ar_SA/installing-boot9strap-(frogtool).txt b/_pages/ar_SA/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ddfc6a7304
--- /dev/null
+++ b/_pages/ar_SA/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt b/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt b/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/ar_SA/installing-boot9strap-(safecerthax).txt b/_pages/ar_SA/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..075e190486
--- /dev/null
+++ b/_pages/ar_SA/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ar_SA/installing-boot9strap-(ssloth-browser).txt b/_pages/ar_SA/installing-boot9strap-(ssloth-browser).txt
index bfd7771226..e5beafbea0 100644
--- a/_pages/ar_SA/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/ar_SA/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/ar_SA/installing-boot9strap-(usm).txt b/_pages/ar_SA/installing-boot9strap-(usm).txt
index 6f9a1eb70c..4e326ff6d3 100644
--- a/_pages/ar_SA/installing-boot9strap-(usm).txt
+++ b/_pages/ar_SA/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/ar_SA/region-changing.txt b/_pages/ar_SA/region-changing.txt
index 9af30fe4b5..413fdb3c10 100644
--- a/_pages/ar_SA/region-changing.txt
+++ b/_pages/ar_SA/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/ar_SA/site-navigation.txt b/_pages/ar_SA/site-navigation.txt
index 40ef6b75b6..a2135747ab 100644
--- a/_pages/ar_SA/site-navigation.txt
+++ b/_pages/ar_SA/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/ar_SA/troubleshooting.txt b/_pages/ar_SA/troubleshooting.txt
index c8f2789ae4..4f46f113bb 100644
--- a/_pages/ar_SA/troubleshooting.txt
+++ b/_pages/ar_SA/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/bg_BG/bannerbomb3.txt b/_pages/bg_BG/bannerbomb3.txt
index 5a11fffeff..0bf8e2d4a0 100644
--- a/_pages/bg_BG/bannerbomb3.txt
+++ b/_pages/bg_BG/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/bg_BG/ctrtransfer.txt b/_pages/bg_BG/ctrtransfer.txt
index 7d28b44618..b4ddf12625 100644
--- a/_pages/bg_BG/ctrtransfer.txt
+++ b/_pages/bg_BG/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/bg_BG/dumping-movable-(nimhax).txt b/_pages/bg_BG/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..1621a85165
--- /dev/null
+++ b/_pages/bg_BG/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/bg_BG/finalizing-setup.txt b/_pages/bg_BG/finalizing-setup.txt
index 99a2426cc8..5e4e918277 100644
--- a/_pages/bg_BG/finalizing-setup.txt
+++ b/_pages/bg_BG/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/bg_BG/get-started.txt b/_pages/bg_BG/get-started.txt
index 6b86afa5d6..fd65fe67fa 100644
--- a/_pages/bg_BG/get-started.txt
+++ b/_pages/bg_BG/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/bg_BG/homebrew-launcher-(super-skaterhax).txt b/_pages/bg_BG/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..6f4daef090
--- /dev/null
+++ b/_pages/bg_BG/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/bg_BG/include/addproxy.txt b/_pages/bg_BG/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/bg_BG/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/bg_BG/include/ctrnand-datayeet.txt b/_pages/bg_BG/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..6749b1d1bc
--- /dev/null
+++ b/_pages/bg_BG/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/bg_BG/include/exploit-usm.txt b/_pages/bg_BG/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/bg_BG/include/exploit-usm.txt
+++ b/_pages/bg_BG/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/bg_BG/include/rmproxy.txt b/_pages/bg_BG/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/bg_BG/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/bg_BG/include/safemodecheck.txt b/_pages/bg_BG/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/bg_BG/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/bg_BG/include/sysupdate.txt b/_pages/bg_BG/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/bg_BG/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/bg_BG/installing-boot9strap-(frogtool).txt b/_pages/bg_BG/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ddfc6a7304
--- /dev/null
+++ b/_pages/bg_BG/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/bg_BG/installing-boot9strap-(hbl-usm).txt b/_pages/bg_BG/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/bg_BG/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/bg_BG/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt b/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/bg_BG/installing-boot9strap-(safecerthax).txt b/_pages/bg_BG/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..075e190486
--- /dev/null
+++ b/_pages/bg_BG/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/bg_BG/installing-boot9strap-(ssloth-browser).txt b/_pages/bg_BG/installing-boot9strap-(ssloth-browser).txt
index bfd7771226..e5beafbea0 100644
--- a/_pages/bg_BG/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/bg_BG/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/bg_BG/installing-boot9strap-(usm).txt b/_pages/bg_BG/installing-boot9strap-(usm).txt
index 6f9a1eb70c..4e326ff6d3 100644
--- a/_pages/bg_BG/installing-boot9strap-(usm).txt
+++ b/_pages/bg_BG/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/bg_BG/region-changing.txt b/_pages/bg_BG/region-changing.txt
index 9af30fe4b5..413fdb3c10 100644
--- a/_pages/bg_BG/region-changing.txt
+++ b/_pages/bg_BG/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/bg_BG/site-navigation.txt b/_pages/bg_BG/site-navigation.txt
index 40ef6b75b6..a2135747ab 100644
--- a/_pages/bg_BG/site-navigation.txt
+++ b/_pages/bg_BG/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/bg_BG/troubleshooting.txt b/_pages/bg_BG/troubleshooting.txt
index c8f2789ae4..4f46f113bb 100644
--- a/_pages/bg_BG/troubleshooting.txt
+++ b/_pages/bg_BG/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/ca_ES/bannerbomb3.txt b/_pages/ca_ES/bannerbomb3.txt
index 5a11fffeff..0bf8e2d4a0 100644
--- a/_pages/ca_ES/bannerbomb3.txt
+++ b/_pages/ca_ES/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/ca_ES/ctrtransfer.txt b/_pages/ca_ES/ctrtransfer.txt
index ff2e54c04e..b9e45becf2 100644
--- a/_pages/ca_ES/ctrtransfer.txt
+++ b/_pages/ca_ES/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/ca_ES/dumping-movable-(nimhax).txt b/_pages/ca_ES/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..1621a85165
--- /dev/null
+++ b/_pages/ca_ES/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/ca_ES/finalizing-setup.txt b/_pages/ca_ES/finalizing-setup.txt
index 996f32c44c..0262ac9531 100644
--- a/_pages/ca_ES/finalizing-setup.txt
+++ b/_pages/ca_ES/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/ca_ES/get-started.txt b/_pages/ca_ES/get-started.txt
index 6b86afa5d6..fd65fe67fa 100644
--- a/_pages/ca_ES/get-started.txt
+++ b/_pages/ca_ES/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/ca_ES/homebrew-launcher-(super-skaterhax).txt b/_pages/ca_ES/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..6f4daef090
--- /dev/null
+++ b/_pages/ca_ES/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/ca_ES/include/addproxy.txt b/_pages/ca_ES/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/ca_ES/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/ca_ES/include/ctrnand-datayeet.txt b/_pages/ca_ES/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..64c4f1437d
--- /dev/null
+++ b/_pages/ca_ES/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Premeu (A) per confirmar
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Premeu (A) per confirmar
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/ca_ES/include/exploit-usm.txt b/_pages/ca_ES/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/ca_ES/include/exploit-usm.txt
+++ b/_pages/ca_ES/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/ca_ES/include/rmproxy.txt b/_pages/ca_ES/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/ca_ES/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/ca_ES/include/safemodecheck.txt b/_pages/ca_ES/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/ca_ES/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/ca_ES/include/sysupdate.txt b/_pages/ca_ES/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/ca_ES/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/ca_ES/installing-boot9strap-(frogtool).txt b/_pages/ca_ES/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ddfc6a7304
--- /dev/null
+++ b/_pages/ca_ES/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt b/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt b/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/ca_ES/installing-boot9strap-(safecerthax).txt b/_pages/ca_ES/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..075e190486
--- /dev/null
+++ b/_pages/ca_ES/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ca_ES/installing-boot9strap-(ssloth-browser).txt b/_pages/ca_ES/installing-boot9strap-(ssloth-browser).txt
index bfd7771226..e5beafbea0 100644
--- a/_pages/ca_ES/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/ca_ES/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/ca_ES/installing-boot9strap-(usm).txt b/_pages/ca_ES/installing-boot9strap-(usm).txt
index 6f9a1eb70c..4e326ff6d3 100644
--- a/_pages/ca_ES/installing-boot9strap-(usm).txt
+++ b/_pages/ca_ES/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/ca_ES/region-changing.txt b/_pages/ca_ES/region-changing.txt
index f07780358d..5e0bfb1113 100644
--- a/_pages/ca_ES/region-changing.txt
+++ b/_pages/ca_ES/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/ca_ES/site-navigation.txt b/_pages/ca_ES/site-navigation.txt
index 40ef6b75b6..a2135747ab 100644
--- a/_pages/ca_ES/site-navigation.txt
+++ b/_pages/ca_ES/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/ca_ES/troubleshooting.txt b/_pages/ca_ES/troubleshooting.txt
index c8f2789ae4..4f46f113bb 100644
--- a/_pages/ca_ES/troubleshooting.txt
+++ b/_pages/ca_ES/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/cs_CZ/bannerbomb3.txt b/_pages/cs_CZ/bannerbomb3.txt
index 5a11fffeff..0bf8e2d4a0 100644
--- a/_pages/cs_CZ/bannerbomb3.txt
+++ b/_pages/cs_CZ/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/cs_CZ/ctrtransfer.txt b/_pages/cs_CZ/ctrtransfer.txt
index 7d28b44618..b4ddf12625 100644
--- a/_pages/cs_CZ/ctrtransfer.txt
+++ b/_pages/cs_CZ/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/cs_CZ/dumping-movable-(nimhax).txt b/_pages/cs_CZ/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..1621a85165
--- /dev/null
+++ b/_pages/cs_CZ/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/cs_CZ/finalizing-setup.txt b/_pages/cs_CZ/finalizing-setup.txt
index 99a2426cc8..5e4e918277 100644
--- a/_pages/cs_CZ/finalizing-setup.txt
+++ b/_pages/cs_CZ/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/cs_CZ/get-started.txt b/_pages/cs_CZ/get-started.txt
index 6b86afa5d6..fd65fe67fa 100644
--- a/_pages/cs_CZ/get-started.txt
+++ b/_pages/cs_CZ/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/cs_CZ/homebrew-launcher-(super-skaterhax).txt b/_pages/cs_CZ/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..6f4daef090
--- /dev/null
+++ b/_pages/cs_CZ/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/cs_CZ/include/addproxy.txt b/_pages/cs_CZ/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/cs_CZ/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/cs_CZ/include/ctrnand-datayeet.txt b/_pages/cs_CZ/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..6749b1d1bc
--- /dev/null
+++ b/_pages/cs_CZ/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/cs_CZ/include/exploit-usm.txt b/_pages/cs_CZ/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/cs_CZ/include/exploit-usm.txt
+++ b/_pages/cs_CZ/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/cs_CZ/include/rmproxy.txt b/_pages/cs_CZ/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/cs_CZ/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/cs_CZ/include/safemodecheck.txt b/_pages/cs_CZ/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/cs_CZ/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/cs_CZ/include/sysupdate.txt b/_pages/cs_CZ/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/cs_CZ/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/cs_CZ/installing-boot9strap-(frogtool).txt b/_pages/cs_CZ/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ddfc6a7304
--- /dev/null
+++ b/_pages/cs_CZ/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt b/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt b/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/cs_CZ/installing-boot9strap-(safecerthax).txt b/_pages/cs_CZ/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..075e190486
--- /dev/null
+++ b/_pages/cs_CZ/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/cs_CZ/installing-boot9strap-(ssloth-browser).txt b/_pages/cs_CZ/installing-boot9strap-(ssloth-browser).txt
index bfd7771226..e5beafbea0 100644
--- a/_pages/cs_CZ/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/cs_CZ/installing-boot9strap-(usm).txt b/_pages/cs_CZ/installing-boot9strap-(usm).txt
index 6f9a1eb70c..4e326ff6d3 100644
--- a/_pages/cs_CZ/installing-boot9strap-(usm).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/cs_CZ/region-changing.txt b/_pages/cs_CZ/region-changing.txt
index 9af30fe4b5..413fdb3c10 100644
--- a/_pages/cs_CZ/region-changing.txt
+++ b/_pages/cs_CZ/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/cs_CZ/site-navigation.txt b/_pages/cs_CZ/site-navigation.txt
index 40ef6b75b6..a2135747ab 100644
--- a/_pages/cs_CZ/site-navigation.txt
+++ b/_pages/cs_CZ/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/cs_CZ/troubleshooting.txt b/_pages/cs_CZ/troubleshooting.txt
index c8f2789ae4..4f46f113bb 100644
--- a/_pages/cs_CZ/troubleshooting.txt
+++ b/_pages/cs_CZ/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/de_DE/bannerbomb3.txt b/_pages/de_DE/bannerbomb3.txt
index 78b6853e8c..43417c0667 100644
--- a/_pages/de_DE/bannerbomb3.txt
+++ b/_pages/de_DE/bannerbomb3.txt
@@ -26,7 +26,7 @@ Falls du eine Taiwanesische Konsole besitzen solltest (gekennzeichnet durch ein
### Was du benötigst
-* Deinen `movable.sed`-Key, welchen du durch den [Seedminer](seedminer) runtergeladen hast
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Abschnitt I - Vorbereitungen
@@ -58,11 +58,7 @@ In diesem Schritt wirst du die Dateien, die zum Auslösen des Bannerbomb3 Exploi
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. Während deine Konsole noch ausgeschalten ist, halte die folgenden Tasten: (L) + (R) + (Steuerkreuz oben) + (A), und während du all diese Tasten zusammen gedrückt hältst, schalte deine Konsole an
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Deine Konsole wird sich ausschalten
- + Wenn die Konsole ins HOME-Menü startet, schalte sie einfach aus
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/de_DE/ctrtransfer.txt b/_pages/de_DE/ctrtransfer.txt
index 5e5b36d555..e496450591 100644
--- a/_pages/de_DE/ctrtransfer.txt
+++ b/_pages/de_DE/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
Dies ist ein zusätzlicher Abschnitt, um ein 11.15.0 CTRTransfer-Image auf deinem Gerät zu installieren.
-Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-Du MUSST bereits eine installierte Version von Luma3DS und boot9strap haben um diese Anleitung benutzen zu können.
-{: .notice--danger}
-
-Die Durchführung eines CTRTransfer kann die Spiele im erweiterten Speichermodus (Monster Hunter, Super Smash Bros, Pokemon Sonne/Mond) auf Old 3DS/2DS Geräten stören. Wenn dies geschieht, musst du die Konsole formatieren (mittels TinyFormat oder Systemeinstellungen), um das Problem zu beheben.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### Was du brauchst
-Um die [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme)-Links auf dieser Seite zu verwenden, benötigst du einen Torrent-Client, wie [qBittorrent](https://www.qbittorrent.org/download.php) oder [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* Die neuste Version von GodMode9 (siehe https://github.com/d0k3/GodMode9/releases/latest) (die GodMode9.`zip` Datei)
@@ -55,9 +53,9 @@ Um die [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme)-Links auf dieser S
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Schritt V - CTRTransfer Abbild entfernen
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/de_DE/dumping-movable-(nimhax).txt b/_pages/de_DE/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..16805d5361
--- /dev/null
+++ b/_pages/de_DE/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Inhalt" %}
+
+{% capture technical_info %}
+Technische Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Was du brauchst
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Anleitung
+
+#### Abschnitt I - Vorbereitungen
+
+1. Schalte deine Konsole aus
+1. Stecke deine SD-Karte in deinen Computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Stecke deine SD-Karte nun wieder in deinen 3DS
+1. Schalte deine Konsole an
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/de_DE/finalizing-setup.txt b/_pages/de_DE/finalizing-setup.txt
index bd68f63ab3..db197f61ef 100644
--- a/_pages/de_DE/finalizing-setup.txt
+++ b/_pages/de_DE/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### Was du brauchst
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Aktualisiere deine Konsole indem du zu den Systemeinstellungen wechselst, danach "Allgemeine Einstellungen" auswählst, ganz nach rechts navigierst (letzter Punkt im unteren Bildschirm) und dann das "System-Update" startest
- + Updates mit B9S + Luma (welches du hast) sind sicher
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Abschnitt III - Homebrew Launcher
@@ -129,7 +125,7 @@ In this section, you will use a script to remove some unnecessary files from you
1. Select "Cleanup SD Card"
1. Drücke (A), wenn du dazu aufgefordert wirst, um fortzufahren
-1. Drücke (A) um fortzufahren
+1. Drücke (A), um fortzufahren
1. Drücke (B), um zum Hauptmenü zurückzukehren
#### Section VIII - Backup Essential Files
@@ -149,7 +145,7 @@ In this section, you will make backups of files that can be used to recover from
1. Press (A) on `essential.exefs` to select it
1. Select "Copy to 0:/gm9/out"
+ If you see "Destination already exists", press (A) on "Overwrite file(s)"
-1. Drücke (A), um fortzufahren
+1. Drücke (A) um fortzufahren
1. Drücke (Home), um das Aktionsmenü aufzurufen
1. Select "Poweroff system" to power off your device
1. Stecke deine SD-Karte in deinen Computer
diff --git a/_pages/de_DE/get-started.txt b/_pages/de_DE/get-started.txt
index 4eb26a71eb..08c77d607b 100644
--- a/_pages/de_DE/get-started.txt
+++ b/_pages/de_DE/get-started.txt
@@ -25,6 +25,10 @@ Wenn du ein ungewöhnliches Menü siehst, STOP - du hast bereits Custom Firmware
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/de_DE/homebrew-launcher-(super-skaterhax).txt b/_pages/de_DE/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..d691b6d14a
--- /dev/null
+++ b/_pages/de_DE/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Inhalt" %}
+
+{% capture technical_info %}
+Technische Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Kompatibilitätshinweise
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### Was du brauchst
+
+* Die neueste Version von [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (die Luma3DS `.zip` Datei)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Abschnitt II - Vorbereitungen
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Schalte deine Konsole aus
+1. Stecke deine SD-Karte in deinen Computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Stecke deine SD-Karte nun wieder in deinen 3DS
+1. Schalte deine Konsole an
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Drücke (A), um fortzufahren
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Schalte deine Konsole aus
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/de_DE/include/addproxy.txt b/_pages/de_DE/include/addproxy.txt
new file mode 100644
index 0000000000..9e2e739ddc
--- /dev/null
+++ b/_pages/de_DE/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + Der Test sollte erfolgreich sein
+1. Click "OK" to continue
diff --git a/_pages/de_DE/include/ctrnand-datayeet.txt b/_pages/de_DE/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..7abd952c30
--- /dev/null
+++ b/_pages/de_DE/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Schalte deine Konsole aus
+1. Drücke und halte (Start), und während du (Start) hältst, schalte deinen 3DS an. This will launch GodMode9
+1. Navigiere zu `[0:] SDCARD` -> `gm9`
+1. Drücke (X) auf die CTRTransfer-Abbild `.bin` um es zu löschen
+1. Drücke (A) zum bestätigen
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Drücke (A), um fortzufahren
+1. While still highlighting `00010017`, press (X) to delete it
+1. Drücke (A) zum bestätigen
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Drücke (A), um die Schreibrechte zu deaktivieren, wenn du dazu aufgefordert wirst
+1. Drücke (Start) um deinen 3DS neu zu starten
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/de_DE/include/ctrtransfer-main.txt b/_pages/de_DE/include/ctrtransfer-main.txt
index 7fb4d954cc..8a77f5980a 100644
--- a/_pages/de_DE/include/ctrtransfer-main.txt
+++ b/_pages/de_DE/include/ctrtransfer-main.txt
@@ -24,6 +24,6 @@
1. Wähle "Exit" aus
1. Drücke (A), um die Schreibrechte zu deaktivieren, wenn du dazu aufgefordert wirst
1. Drücke (Start) um deinen 3DS neu zu starten
-1. Aktualisiere deine Konsole indem du zu den Systemeinstellungen wechselst, danach "Allgemeine Einstellungen" auswählst, ganz nach rechts navigierst (letzter Punkt im unteren Bildschirm) und dann das "System-Update" startest
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+ Updates mit B9S + Luma (welches du hast) sind sicher
+ Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll
diff --git a/_pages/de_DE/include/exploit-usm.txt b/_pages/de_DE/include/exploit-usm.txt
index 76876b09a8..0efa5485c6 100644
--- a/_pages/de_DE/include/exploit-usm.txt
+++ b/_pages/de_DE/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In diesem Abschnitt du wirst in den Safe Mode (eine Funktion, die auf allen 3DS
1. Während deine Konsole noch ausgeschalten ist, halte die folgenden Tasten: (L) + (R) + (Steuerkreuz oben) + (A), und während du all diese Tasten zusammen gedrückt hältst, schalte deine Konsole an
+ Halte die Tastengedrückt, bis deine Konsole den Safe Mode startet (ein "System Update" Menü)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + Wenn du nach mehreren Versuchen nicht in den Safe Mode gelangen kannst, kann einer deiner Tasten fehlschlagen oder kaputt sein. Wenn das der Fall ist, trete dem [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) Server bei und frage, auf Englisch, nach Hilfe.
-{%- elsif include.method == "bb3" %}
- + Wenn du nach mehreren Versuchen nicht in den Safe Mode gelangen kannst, kann einer deiner Tasten fehlschlagen oder kaputt sein. Wenn dies der Fall ist, musst du [einem alternativen Zweig von BannerBomb3](installing-boot9strap-(fredtool)) folgen. Um Hilfe in dieser Angelegenheit zu erhalten, trete dem [Nintendo Homebrew auf Discord](https://discord.gg/MWxPgEp) bei und frage in Englisch nach Hilfe.
-{%- endif %}
1. Drücke "OK" um das System-Update zu bestätigen
+ Es gibt kein Update. Dies ist ein Teil des Exploits
1. Drücke "Akzeptieren", um die Nutzungsbedingungen und Warnhinweise zu akzeptieren
@@ -14,3 +9,5 @@ In diesem Abschnitt du wirst in den Safe Mode (eine Funktion, die auf allen 3DS
1. Wenn du gefragt wirst, ob die Internet Einstellungen festgelegt werden möchtest, wähle "Festlegen"
1. Öffne im folgenden Menü `Verbindung 1` -> `Einstellungen ändern` -> `Nächste Seite (rechter Pfeil)` -> `Proxy-Einstellungen` -> `Detailliertes Setup` ([Bild](/images/screenshots/usm/safemode_highlighted.png))
1. Wenn der Exploit erfolgreich war, wird deine Konsole den SafeBS9Installer gestartet haben
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/de_DE/include/rmproxy.txt b/_pages/de_DE/include/rmproxy.txt
new file mode 100644
index 0000000000..36dcca247d
--- /dev/null
+++ b/_pages/de_DE/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + Der Test sollte erfolgreich sein
+1. Schalte deine Konsole aus
diff --git a/_pages/de_DE/include/safemodecheck.txt b/_pages/de_DE/include/safemodecheck.txt
new file mode 100644
index 0000000000..74ee5b908a
--- /dev/null
+++ b/_pages/de_DE/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. Während deine Konsole noch ausgeschalten ist, halte die folgenden Tasten: (L) + (R) + (Steuerkreuz oben) + (A), und während du all diese Tasten zusammen gedrückt hältst, schalte deine Konsole an
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Deine Konsole wird sich ausschalten
+ + Wenn die Konsole ins HOME-Menü startet, schalte sie einfach aus
diff --git a/_pages/de_DE/include/seedminer-base.txt b/_pages/de_DE/include/seedminer-base.txt
index f2fc6d03c8..854777d9cc 100644
--- a/_pages/de_DE/include/seedminer-base.txt
+++ b/_pages/de_DE/include/seedminer-base.txt
@@ -16,7 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
In this section, you will update your system to the latest version, which is necessary for Seedminer.
-1. Aktualisiere deine Konsole indem du zu den Systemeinstellungen wechselst, danach "Allgemeine Einstellungen" auswählst, ganz nach rechts navigierst (letzter Punkt im unteren Bildschirm) und dann das "System-Update" startest
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+ The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
diff --git a/_pages/de_DE/include/sysupdate.txt b/_pages/de_DE/include/sysupdate.txt
new file mode 100644
index 0000000000..947da8ee90
--- /dev/null
+++ b/_pages/de_DE/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates mit B9S + Luma (welches du hast) sind sicher
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/de_DE/installing-boot9strap-(frogtool).txt b/_pages/de_DE/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ba65cf20e3
--- /dev/null
+++ b/_pages/de_DE/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Inhalt" %}
+
+{% capture technical_info %}
+Technische Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### Was du brauchst
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Abschnitt I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Abschnitt II - Vorbereitungen
+
+1. Schalte deine Konsole aus
+1. Stecke deine SD-Karte in deinen Computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Stecke deine SD-Karte nun wieder in deinen 3DS
+1. Schalte deine Konsole an
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Starte die Download-Spiel Anwendung
+1. Warte bis du die zwei Knöpfe siehst
+ + Drücke keine der Tasten
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Wähle "Miscellaneous options"
+1. Wähle "Switch the hb. title to the current app."
+1. Drücke (B) um fortzufahren
+1. Drücke (B), um zum Rosalina-Hauptmenü zurückzukehren
+1. Drücke (B), um das Rosalina-Menü zu schließen
+1. Drücke (Home) und schließe die Download-Spiel Anwendung
+1. Starte die Download-Spiel Anwendung erneut
+1. Deine Konsole sollte den Homebrew Launcher laden
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Schalte deine Konsole aus
+
+___
+
+### Fortfahren mit [Setup fertigstellen](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/de_DE/installing-boot9strap-(hbl-usm).txt b/_pages/de_DE/installing-boot9strap-(hbl-usm).txt
index 6a9bb5d366..e6dbf4f260 100644
--- a/_pages/de_DE/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/de_DE/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Schalte deine Konsole an
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Starte slotTool aus der Liste der Homebrew-Anwendungen
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Schritt III - boot9strap installieren
diff --git a/_pages/de_DE/installing-boot9strap-(kartdlphax).txt b/_pages/de_DE/installing-boot9strap-(kartdlphax).txt
index f918db6c65..3499e7c57c 100644
--- a/_pages/de_DE/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/de_DE/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### Was du brauchst
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. Wenn das der Fall ist, trete dem [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) Server bei und frage, auf Englisch, nach Hilfe.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/de_DE/installing-boot9strap-(safecerthax).txt b/_pages/de_DE/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..2d48d7ca8e
--- /dev/null
+++ b/_pages/de_DE/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Inhalt" %}
+
+{% capture technical_info %}
+Technische Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Kompatibilitätshinweise
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### Was du brauchst
+
+* Die neueste Version vom [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (Direkter Download)
+* Die neueste Version von [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (Direkter Download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Anleitung
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Abschnitt II - Vorbereitungen
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Stecke deine SD-Karte in deinen Computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte
+1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Stecke deine SD-Karte nun wieder in deinen 3DS
+1. Schalte deine Konsole an
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Schalte deine Konsole aus
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. Während deine Konsole noch ausgeschalten ist, halte die folgenden Tasten: (L) + (R) + (Steuerkreuz oben) + (A), und während du all diese Tasten zusammen gedrückt hältst, schalte deine Konsole an
+ + Halte die Tastengedrückt, bis deine Konsole den Safe Mode startet (ein "System Update" Menü)
+1. Drücke "OK" um das System-Update zu bestätigen
+ + Es gibt kein Update. Dies ist ein Teil des Exploits
+1. Drücke "Akzeptieren", um die Nutzungsbedingungen und Warnhinweise zu akzeptieren
+1. Das Update wird irgendwann mit dem Fehlercode `003-1099` fehlschlagen. Dies ist so vorgesehen
+1. Press "OK" to close the error message
+1. Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Fortfahren mit [Setup fertigstellen](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/de_DE/installing-boot9strap-(ssloth-browser).txt b/_pages/de_DE/installing-boot9strap-(ssloth-browser).txt
index 01f0039c69..57f81f1eff 100644
--- a/_pages/de_DE/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/de_DE/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + Der Test sollte erfolgreich sein
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + Der Test sollte erfolgreich sein
-1. Schalte deine Konsole aus
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/de_DE/installing-boot9strap-(usm).txt b/_pages/de_DE/installing-boot9strap-(usm).txt
index 55b5963e2d..e7f0da107e 100644
--- a/_pages/de_DE/installing-boot9strap-(usm).txt
+++ b/_pages/de_DE/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/de_DE/move-emunand.txt b/_pages/de_DE/move-emunand.txt
index 1f6220db07..1566f60bcc 100644
--- a/_pages/de_DE/move-emunand.txt
+++ b/_pages/de_DE/move-emunand.txt
@@ -8,7 +8,7 @@ title: "EmuNAND transferieren"
Dies ist ein Zusatzabschnitt zum Verschieben des Inhaltes eines vorherigen EmuNAND in die neue SysNAND CFW plus Entfernung des alten EmuNAND. Beachte, dass die Begriffe EmuNAND und RedNAND sich auf leicht unterschiedliche Implementierungen [des selben Konzepts](http://3dbrew.org/wiki/NAND_Redirection) beziehen.
-Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
+Beachte: Sollten noch weitere Payload-Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole (Start) gedrückt hältst und in welchem du dann das D-Pad und (A) verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
Du MUSST bereits eine installierte Version von Luma3DS und boot9strap haben um diese Anleitung benutzen zu können.
{: .notice--danger}
diff --git a/_pages/de_DE/region-changing.txt b/_pages/de_DE/region-changing.txt
index e619276675..7cf87cb1a7 100644
--- a/_pages/de_DE/region-changing.txt
+++ b/_pages/de_DE/region-changing.txt
@@ -6,11 +6,15 @@ title: "Wechseln der Region"
### Lesen erforderlich
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma/payloads/` Ordner auf deiner SD-Karte sein, starte das "Chainloader Menu", indem du beim Starten der Konsole die (Start) Taste gedrückt hältst und in welchem du dann das D-Pad und die (A) Taste verwenden musst um "GodMode9", für die Anleitung, auszuwählen.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-Du MUSST bereits eine installierte Version von Luma3DS und boot9straps haben, um diese Anleitung benutzen zu können.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. Wenn dies geschieht, musst du die Konsole formatieren (mittels TinyFormat oder Systemeinstellungen), um das Problem zu beheben.
-{: .notice--warning}
-
### Was du brauchst
-Um die [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme)-Links auf dieser Seite zu verwenden, benötigst du einen Torrent-Client, wie [qBittorrent](https://www.qbittorrent.org/download.php) oder [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* Die neuste Version von GodMode9 (siehe https://github.com/d0k3/GodMode9/releases/latest) (die GodMode9.`zip` Datei)
@@ -72,15 +72,11 @@ Um die [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme)-Links auf dieser S
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Öffne die Systemeinstellungen
-1. Gehe zu "Allgemeine Einstellungen", "Nutzereinstellungen", dann "Region wählen"
-1. Wähle ein Land der Region, zu welcher du gewechselt hast
-1. Falls aufgefordert, musst du keinen Staat einstellen
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/de_DE/site-navigation.txt b/_pages/de_DE/site-navigation.txt
index 8991682d35..ddf290fff3 100644
--- a/_pages/de_DE/site-navigation.txt
+++ b/_pages/de_DE/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Bedienung](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Startseite](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installation von boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installation von boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installation von boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/de_DE/troubleshooting.txt b/_pages/de_DE/troubleshooting.txt
index ab1dcf287f..0792f5531d 100644
--- a/_pages/de_DE/troubleshooting.txt
+++ b/_pages/de_DE/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -421,6 +422,31 @@ Wenn dies nicht gelingt, benutze eine andere SD-Karte.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/el_GR/bannerbomb3.txt b/_pages/el_GR/bannerbomb3.txt
index 5cc2e99a85..be3930c2e8 100644
--- a/_pages/el_GR/bannerbomb3.txt
+++ b/_pages/el_GR/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/el_GR/ctrtransfer.txt b/_pages/el_GR/ctrtransfer.txt
index a839d7e29c..f3676f6386 100644
--- a/_pages/el_GR/ctrtransfer.txt
+++ b/_pages/el_GR/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/el_GR/dumping-movable-(nimhax).txt b/_pages/el_GR/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..2f8d22d131
--- /dev/null
+++ b/_pages/el_GR/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Πίνακας περιεχομένων" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/el_GR/finalizing-setup.txt b/_pages/el_GR/finalizing-setup.txt
index f5fe391214..2c1a89e2ff 100644
--- a/_pages/el_GR/finalizing-setup.txt
+++ b/_pages/el_GR/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/el_GR/get-started.txt b/_pages/el_GR/get-started.txt
index 35154840d3..68c975fa80 100644
--- a/_pages/el_GR/get-started.txt
+++ b/_pages/el_GR/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/el_GR/homebrew-launcher-(super-skaterhax).txt b/_pages/el_GR/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..390ffd841e
--- /dev/null
+++ b/_pages/el_GR/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Πίνακας περιεχομένων" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/el_GR/include/addproxy.txt b/_pages/el_GR/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/el_GR/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/el_GR/include/ctrnand-datayeet.txt b/_pages/el_GR/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..da04ec1257
--- /dev/null
+++ b/_pages/el_GR/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Πατήστε (A) για επιβεβαίωση
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Πατήστε (A) για επιβεβαίωση
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/el_GR/include/exploit-usm.txt b/_pages/el_GR/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/el_GR/include/exploit-usm.txt
+++ b/_pages/el_GR/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/el_GR/include/rmproxy.txt b/_pages/el_GR/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/el_GR/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/el_GR/include/safemodecheck.txt b/_pages/el_GR/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/el_GR/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/el_GR/include/sysupdate.txt b/_pages/el_GR/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/el_GR/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/el_GR/installing-boot9strap-(frogtool).txt b/_pages/el_GR/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ebcb8f6d26
--- /dev/null
+++ b/_pages/el_GR/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Πίνακας περιεχομένων" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/el_GR/installing-boot9strap-(hbl-usm).txt b/_pages/el_GR/installing-boot9strap-(hbl-usm).txt
index d3aa6fc9d1..aedccd7122 100644
--- a/_pages/el_GR/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/el_GR/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/el_GR/installing-boot9strap-(kartdlphax).txt b/_pages/el_GR/installing-boot9strap-(kartdlphax).txt
index 5ed96d6906..b67226d0a7 100644
--- a/_pages/el_GR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/el_GR/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/el_GR/installing-boot9strap-(safecerthax).txt b/_pages/el_GR/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..ed39e08c06
--- /dev/null
+++ b/_pages/el_GR/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Πίνακας περιεχομένων" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/el_GR/installing-boot9strap-(ssloth-browser).txt b/_pages/el_GR/installing-boot9strap-(ssloth-browser).txt
index 5cca758279..f90ef88a83 100644
--- a/_pages/el_GR/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/el_GR/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/el_GR/installing-boot9strap-(usm).txt b/_pages/el_GR/installing-boot9strap-(usm).txt
index 31f4396b4b..2393b22692 100644
--- a/_pages/el_GR/installing-boot9strap-(usm).txt
+++ b/_pages/el_GR/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/el_GR/region-changing.txt b/_pages/el_GR/region-changing.txt
index 7463a06f4b..6e64cb420d 100644
--- a/_pages/el_GR/region-changing.txt
+++ b/_pages/el_GR/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,27 +22,23 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.15.0 CTRTransfer image for your device type of the region that you want to change to (e.g. Download "New 3DS or 2DS - USA" if you have a New 3DS and want to change your region to USA)
+ - [New 3DS or 2DS - 11.15.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:2a39586a0a10d1f0a9470b082ef1453e502b2425&xt=urn:btmh:12205090f0a43a956bd7449658ee0580949d15ae112c80007fb2ef42e3265b6c5f6c&dn=11.15.0-47E_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
- + - [New 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:986b454cab2d9f27daa63d4291f61aed039871d2&xt=urn:btmh:1220c8c96bd76b6fef041aada9ce4e3cf06ef141f3c4558310b9c3a00e39bccc43a1&dn=11.15.0-47J_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ + - [New 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:986b454cab2d9f27daa63d4291f61aed039871d2&xt=urn:btmh:1220c8c96bd76b6fef041aada9ce4e3cf06ef141f3c4558310b9c3a00e39bccc43a1&dn=11.15.0-47J_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [New 3DS or 2DS - 11.15.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:e247b21e1f81f76acf6d3140da45da858e76f1f6&xt=urn:btmh:122008168a003666c14783998d1dd82ac02d1b3be902efa75cf5a03ee47da1fecd73&dn=11.15.0-41K_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [New 3DS or 2DS - 11.15.0 - USA - CTRTransfer](magnet:?xt=urn:btih:8ae25de1ab01c9304eece9785d5db6cdd6728214&xt=urn:btmh:1220ab284cc822f3170305723e9920e1bb4d7649fdf528c3ea04aada31e09bfbbe57&dn=11.15.0-47U_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
~
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Μεταβείτε στο "Other Settings", "Profile" και έπειτα στο "Region Settings"
-1. Επιλέξτε την χώρα της περιοχής από την οποία αλλάξατε
-1. Εάν σας ζητηθεί, δεν είναι αναγκαίο να δηλώσετε πολιτεία
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/el_GR/site-navigation.txt b/_pages/el_GR/site-navigation.txt
index c8c3e8259d..658e3c3a7a 100644
--- a/_pages/el_GR/site-navigation.txt
+++ b/_pages/el_GR/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/el_GR/troubleshooting.txt b/_pages/el_GR/troubleshooting.txt
index 116d4349f5..61a889734a 100644
--- a/_pages/el_GR/troubleshooting.txt
+++ b/_pages/el_GR/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/en_PT/bannerbomb3.txt b/_pages/en_PT/bannerbomb3.txt
index b5a1333fdd..65034fe819 100644
--- a/_pages/en_PT/bannerbomb3.txt
+++ b/_pages/en_PT/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/en_PT/ctrtransfer.txt b/_pages/en_PT/ctrtransfer.txt
index 8cb49a2b15..a16368bd3e 100644
--- a/_pages/en_PT/ctrtransfer.txt
+++ b/_pages/en_PT/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if ye have any payload files other than `GodMode9.firm` in th' `/luma/payloads/` folder on ye SD card, holdin' (Start) on boot gunna display a "chainloader menu" where ye gunna have to use th' D-Pad 'n th' (A) button to select "GodMode9" fer these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/en_PT/dumping-movable-(nimhax).txt b/_pages/en_PT/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..f91239cc90
--- /dev/null
+++ b/_pages/en_PT/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off ye device
+1. Insert ye SD card into ye computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert ye SD card into ye device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/en_PT/finalizing-setup.txt b/_pages/en_PT/finalizing-setup.txt
index 1b99c2ab96..8b315394c3 100644
--- a/_pages/en_PT/finalizing-setup.txt
+++ b/_pages/en_PT/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update ye device by goin' to System Settings, then "Other Settings", then goin' all th' way to th' right 'n usin' "System Update"
- + Updates while usin' B9S + Luma (what ye have) be safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/en_PT/get-started.txt b/_pages/en_PT/get-started.txt
index 2cd6c2fdb0..39b330f416 100644
--- a/_pages/en_PT/get-started.txt
+++ b/_pages/en_PT/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/en_PT/homebrew-launcher-(super-skaterhax).txt b/_pages/en_PT/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..f0e22ef72c
--- /dev/null
+++ b/_pages/en_PT/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off ye device
+1. Insert ye SD card into ye computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert ye SD card into ye device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off ye device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/en_PT/include/addproxy.txt b/_pages/en_PT/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/en_PT/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/en_PT/include/ctrnand-datayeet.txt b/_pages/en_PT/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..da7f583fca
--- /dev/null
+++ b/_pages/en_PT/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off ye device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on th' CTRTransfer image `.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot ye device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/en_PT/include/exploit-usm.txt b/_pages/en_PT/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/en_PT/include/exploit-usm.txt
+++ b/_pages/en_PT/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/en_PT/include/rmproxy.txt b/_pages/en_PT/include/rmproxy.txt
new file mode 100644
index 0000000000..6fe784c36c
--- /dev/null
+++ b/_pages/en_PT/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off ye device
diff --git a/_pages/en_PT/include/safemodecheck.txt b/_pages/en_PT/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/en_PT/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/en_PT/include/sysupdate.txt b/_pages/en_PT/include/sysupdate.txt
new file mode 100644
index 0000000000..d803d54a61
--- /dev/null
+++ b/_pages/en_PT/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update ye device by goin' to System Settings, then "Other Settings", then goin' all th' way to th' right 'n usin' "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while usin' B9S + Luma (what ye have) be safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/en_PT/installing-boot9strap-(frogtool).txt b/_pages/en_PT/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..b411fd9c87
--- /dev/null
+++ b/_pages/en_PT/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off ye device
+1. Insert ye SD card into ye computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert ye SD card into ye device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch th' Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Ye device should be loadin' th' Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off ye device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/en_PT/installing-boot9strap-(hbl-usm).txt b/_pages/en_PT/installing-boot9strap-(hbl-usm).txt
index 4fcc562177..dc83650d11 100644
--- a/_pages/en_PT/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/en_PT/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/en_PT/installing-boot9strap-(kartdlphax).txt b/_pages/en_PT/installing-boot9strap-(kartdlphax).txt
index b3565043f3..c0e6149cbf 100644
--- a/_pages/en_PT/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/en_PT/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/en_PT/installing-boot9strap-(safecerthax).txt b/_pages/en_PT/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..dfb1288bf4
--- /dev/null
+++ b/_pages/en_PT/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert ye SD card into ye computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on th' root 'o ye SD card
+1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert ye SD card into ye device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off ye device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/en_PT/installing-boot9strap-(ssloth-browser).txt b/_pages/en_PT/installing-boot9strap-(ssloth-browser).txt
index 941ca3e449..5d4832726e 100644
--- a/_pages/en_PT/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/en_PT/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off ye device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/en_PT/installing-boot9strap-(usm).txt b/_pages/en_PT/installing-boot9strap-(usm).txt
index ef0c1d933a..95698bd5b6 100644
--- a/_pages/en_PT/installing-boot9strap-(usm).txt
+++ b/_pages/en_PT/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/en_PT/region-changing.txt b/_pages/en_PT/region-changing.txt
index 51b275294d..51e8daa52b 100644
--- a/_pages/en_PT/region-changing.txt
+++ b/_pages/en_PT/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if ye have any payload files other than `GodMode9.firm` in th' `/luma/payloads/` folder on ye SD card, holdin' (Start) on boot gunna display a "chainloader menu" where ye gunna have to use th' D-Pad 'n th' (A) button to select "GodMode9" fer these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/en_PT/site-navigation.txt b/_pages/en_PT/site-navigation.txt
index e76bf034f3..f4455a209f 100644
--- a/_pages/en_PT/site-navigation.txt
+++ b/_pages/en_PT/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/en_PT/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installin' boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/en_PT/troubleshooting.txt b/_pages/en_PT/troubleshooting.txt
index cf323ad36f..f0821079fe 100644
--- a/_pages/en_PT/troubleshooting.txt
+++ b/_pages/en_PT/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/es_ES/bannerbomb3.txt b/_pages/es_ES/bannerbomb3.txt
index 1f73a4032b..2bc5f83778 100644
--- a/_pages/es_ES/bannerbomb3.txt
+++ b/_pages/es_ES/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### Qué necesitas
-* Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Sección I - Preparativos
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/es_ES/ctrtransfer.txt b/_pages/es_ES/ctrtransfer.txt
index abd92e1101..c05aec3b28 100644
--- a/_pages/es_ES/ctrtransfer.txt
+++ b/_pages/es_ES/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en la carpeta `/luma/payloads/` en tu tarjeta SD, al mantener (Start) al inicio se desplegará un "chainloader menu" donde tendrás que usar el D-Pad y pulsar (A) para seleccionar "GodMode9", para esas instrucciones.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-Ya DEBES tener instalado Luma3DS y boot9strap para usar esto.
-{: .notice--danger}
-
-Realizar un CTRTransfer puede romper los juegos de modo de memoria extendida (Monster Hunter, Super Smash Bros, Pokémon Sol/Luna) en consolas Old 3DS/2DS. Si esto ocurre, necesitarás formatear el dispositivo (usando TinyFormat o la Configuración de la consola) para solucionar el problema.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### Qué necesitas
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Sección V - Eliminar la imagen CTRTransfer
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/es_ES/dumping-movable-(nimhax).txt b/_pages/es_ES/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..298d74f615
--- /dev/null
+++ b/_pages/es_ES/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Tabla de contenidos" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Qué necesitas
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instrucciones
+
+#### Sección I - Preparativos
+
+1. Apaga tu consola
+1. Inserta tu tarjeta SD en tu computadora
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinserta tu tarjeta SD en tu consola
+1. Enciende tu consola
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/es_ES/finalizing-setup.txt b/_pages/es_ES/finalizing-setup.txt
index 5233f8ecb7..a5e0b32dde 100644
--- a/_pages/es_ES/finalizing-setup.txt
+++ b/_pages/es_ES/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### Qué necesitas
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Actualiza tu 3DS dirigiéndote a la Configuración de la consola, después a "Otras opciones", luego ve al último menú de la derecha y pulsa en "Actualización"
- + Actualizar la consola teniendo B9S y Luma (lo que acabas de instalar) es seguro
- + El actualizador podría mostrar un mensaje diciendo "La consola ya está actualizada" en lugar de actualizar. Esto es normal si tu consola ya está actualizada; continúa con la siguiente sección
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Sección III - Homebrew Launcher
diff --git a/_pages/es_ES/get-started.txt b/_pages/es_ES/get-started.txt
index 1bbe3e8014..2ef09e8dc8 100644
--- a/_pages/es_ES/get-started.txt
+++ b/_pages/es_ES/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/es_ES/homebrew-launcher-(super-skaterhax).txt b/_pages/es_ES/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..8acfd8b006
--- /dev/null
+++ b/_pages/es_ES/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Tabla de contenidos" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### Qué necesitas
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Sección II - Preparativos
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Apaga tu consola
+1. Inserta tu tarjeta SD en tu computadora
+1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD
+ + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinserta tu tarjeta SD en tu consola
+1. Enciende tu consola
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Presiona (A) para continuar
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Apaga tu consola
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/es_ES/include/addproxy.txt b/_pages/es_ES/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/es_ES/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/es_ES/include/ctrnand-datayeet.txt b/_pages/es_ES/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..7f8948cfa2
--- /dev/null
+++ b/_pages/es_ES/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Apaga tu consola
+1. Presiona y mantén el botón (Start), y mientras lo mantienes presionado, enciende tu consola. Esto abrirá GodMode9
+1. Ve a `[0:] SDCARD` -> `gm9`
+1. Presiona (X) en la imagen `.bin` de CTRTransfer para borrarla
+1. Presiona (A) para confirmar
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Selecciona "Copy to 0:/gm9/out"
+1. Presiona (A) para continuar
+1. While still highlighting `00010017`, press (X) to delete it
+1. Presiona (A) para confirmar
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Presiona (A) para volver a bloquear los permisos de escritura si se solicita
+1. Presiona (Start) para reiniciar tu consola
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/es_ES/include/exploit-usm.txt b/_pages/es_ES/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/es_ES/include/exploit-usm.txt
+++ b/_pages/es_ES/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/es_ES/include/rmproxy.txt b/_pages/es_ES/include/rmproxy.txt
new file mode 100644
index 0000000000..d8f610a325
--- /dev/null
+++ b/_pages/es_ES/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Apaga tu consola
diff --git a/_pages/es_ES/include/safemodecheck.txt b/_pages/es_ES/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/es_ES/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/es_ES/include/sysupdate.txt b/_pages/es_ES/include/sysupdate.txt
new file mode 100644
index 0000000000..78a748cae5
--- /dev/null
+++ b/_pages/es_ES/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Actualiza tu 3DS dirigiéndote a la Configuración de la consola, después a "Otras opciones", luego ve al último menú de la derecha y pulsa en "Actualización"
+{%- if include.cfw == "true" %}
+ + Actualizar la consola teniendo B9S y Luma (lo que acabas de instalar) es seguro
+{%- endif %}
+ + El actualizador podría mostrar un mensaje diciendo "La consola ya está actualizada" en lugar de actualizar. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/es_ES/installing-boot9strap-(frogtool).txt b/_pages/es_ES/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..198405a85c
--- /dev/null
+++ b/_pages/es_ES/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Tabla de contenidos" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### Qué necesitas
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Sección I - Verificación de CFW
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Sección II - Preparativos
+
+1. Apaga tu consola
+1. Inserta tu tarjeta SD en tu computadora
+1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinserta tu tarjeta SD en tu consola
+1. Enciende tu consola
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. Si el exploit fue exitoso, tu consola habrá cargado la versión japonesa de Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Inicia la aplicación de Modo Descarga
+1. Espera hasta que veas los dos botones
+ + Do not press either of the buttons
+1. Presiona (Left Shoulder) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina
+1. Selecciona "Miscellaneous options"
+1. Selecciona "Switch the hb. title to the current app."
+1. Presiona (B) para continuar
+1. Presiona (B) para regresar al menú principal de Rosalina
+1. Presiona (B) para salir del menú de Rosalina
+1. Presiona (Home), luego cierra la aplicación de Modo Descarga
+1. Relaunch the Download Play application
+1. Tu consola debería cargar el Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Apaga tu consola
+
+___
+
+### Continúa en [Finalizar instalación](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/es_ES/installing-boot9strap-(hbl-usm).txt b/_pages/es_ES/installing-boot9strap-(hbl-usm).txt
index 34887f19c7..1864715694 100644
--- a/_pages/es_ES/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/es_ES/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Enciende tu consola
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Sección III - Instalar boot9strap
diff --git a/_pages/es_ES/installing-boot9strap-(kartdlphax).txt b/_pages/es_ES/installing-boot9strap-(kartdlphax).txt
index 7d2b0a31ba..698938603d 100644
--- a/_pages/es_ES/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/es_ES/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ Para seguir estas instrucciones, necesitarás lo siguiente:
- Una copia física o digital de Mario Kart 7 de la misma región que ambas consolas
- Una tarjeta SD para cada consola
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### Qué necesitas
En la **3DS de origen** (la 3DS con custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
En la **3DS de destino** (la 3DS que estás intentando modificar):
@@ -47,7 +44,14 @@ En la **3DS de destino** (la 3DS que estás intentando modificar):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Sección I - Preparativos (3DS de origen)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Crea las carpetas `plugins` y `00040000...` si no existen
1. Saca la tarjeta SD de la computadora y ponla en la **3DS de origen**
-#### Sección II - Preparativos (3DS de destino)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Saca la tarjeta SD de la computadora y ponla en la **3DS de destino**
-#### Sección III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/es_ES/installing-boot9strap-(safecerthax).txt b/_pages/es_ES/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..05f25e3eae
--- /dev/null
+++ b/_pages/es_ES/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Tabla de contenidos" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### Qué necesitas
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instrucciones
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Sección II - Preparativos
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Inserta tu tarjeta SD en tu computadora
+1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD
+ + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
+1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD
+1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de `boot9strap` a la carpeta `/boot9strap/` en tu tarjeta SD
+1. Copia `SafeB9SInstaller.bin` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD
+1. Reinserta tu tarjeta SD en tu consola
+1. Enciende tu consola
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Apaga tu consola
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continúa en [Finalizar instalación](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/es_ES/installing-boot9strap-(ssloth-browser).txt b/_pages/es_ES/installing-boot9strap-(ssloth-browser).txt
index 4ae1237268..894e3bdbba 100644
--- a/_pages/es_ES/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/es_ES/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Apaga tu consola
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/es_ES/installing-boot9strap-(usm).txt b/_pages/es_ES/installing-boot9strap-(usm).txt
index 130ad99d66..ecc1be3864 100644
--- a/_pages/es_ES/installing-boot9strap-(usm).txt
+++ b/_pages/es_ES/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Sección III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/es_ES/region-changing.txt b/_pages/es_ES/region-changing.txt
index c555287441..d39636ab07 100644
--- a/_pages/es_ES/region-changing.txt
+++ b/_pages/es_ES/region-changing.txt
@@ -6,11 +6,15 @@ title: "Cambio de Región"
### Lectura requerida
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en la carpeta `/luma/payloads/` en tu tarjeta SD, al mantener (Start) al inicio se desplegará un "chainloader menu" donde tendrás que usar el D-Pad y pulsar (A) para seleccionar "GodMode9", para esas instrucciones.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,33 +22,29 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-Ya DEBES tener instalado Luma3DS y boot9strap para usar esto.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. Si esto ocurre, necesitarás formatear el dispositivo (usando TinyFormat o la Configuración de la consola) para solucionar el problema.
-{: .notice--warning}
-
### Qué necesitas
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
* La última versión de [FBI](https://github.com/Steveice10/FBI/releases/latest) *(el archivo `.3dsx`)*
* The 11.15.0 CTRTransfer image for your device type of the region that you want to change to (e.g. Download "New 3DS or 2DS - USA" if you have a New 3DS and want to change your region to USA)
+ - [New 3DS or 2DS - 11.15.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:2a39586a0a10d1f0a9470b082ef1453e502b2425&xt=urn:btmh:12205090f0a43a956bd7449658ee0580949d15ae112c80007fb2ef42e3265b6c5f6c&dn=11.15.0-47E_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
- + - [New 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:986b454cab2d9f27daa63d4291f61aed039871d2&xt=urn:btmh:1220c8c96bd76b6fef041aada9ce4e3cf06ef141f3c4558310b9c3a00e39bccc43a1&dn=11.15.0-47J_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ + - [New 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:986b454cab2d9f27daa63d4291f61aed039871d2&xt=urn:btmh:1220c8c96bd76b6fef041aada9ce4e3cf06ef141f3c4558310b9c3a00e39bccc43a1&dn=11.15.0-47J_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [New 3DS or 2DS - 11.15.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:e247b21e1f81f76acf6d3140da45da858e76f1f6&xt=urn:btmh:122008168a003666c14783998d1dd82ac02d1b3be902efa75cf5a03ee47da1fecd73&dn=11.15.0-41K_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [New 3DS or 2DS - 11.15.0 - USA - CTRTransfer](magnet:?xt=urn:btih:8ae25de1ab01c9304eece9785d5db6cdd6728214&xt=urn:btmh:1220ab284cc822f3170305723e9920e1bb4d7649fdf528c3ea04aada31e09bfbbe57&dn=11.15.0-47U_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
~
+ - [Old 3DS or 2DS - 11.15.0 - CHN - CTRTransfer](magnet:?xt=urn:btih:f71d2379e577db22d7f14a656bca7bf2eb5243f8&xt=urn:btmh:12200c6ee93f63deef8ce9023b8214ca36cd29c37d2726acf7a15594256409f6629b&dn=11.15.0-4C_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:fc71540a99c884ab8a4211192d3af92c7ffb9372&xt=urn:btmh:12203c317846d43110fd3a35cedf427cb5fdd58ac764316f4d0634181efbb762ee92&dn=11.15.0-47E_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
- + - [Old 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:7b88adf3f47d036bcdee987f6597770eaafdd8dd&xt=urn:btmh:1220f39be6c14438b07ebdf120161215088d56c59608d5f34f0744d972c7a0cf7ca2&dn=11.15.0-47J_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ + - [Old 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:7b88adf3f47d036bcdee987f6597770eaafdd8dd&xt=urn:btmh:1220f39be6c14438b07ebdf120161215088d56c59608d5f34f0744d972c7a0cf7ca2&dn=11.15.0-47J_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:90d6689106751b057616d32445442fc1b7370e38&xt=urn:btmh:1220a08fe569ac1596f6a113730de3cc7aa0dfd6858d40830cc0f0cee07bf585fd93&dn=11.15.0-41K_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - TWN - CTRTransfer](magnet:?xt=urn:btih:19f978d42b0d9590bc742d7598efa45091567cee&xt=urn:btmh:12204429bc94456825530a2dff233ed399a292e1004a64b65fa4b451a69e116cad2a&dn=11.15.0-39T_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - USA - CTRTransfer](magnet:?xt=urn:btih:fd39778d4116a210c3116c014521120f0e7b9e1d&xt=urn:btmh:12203a51aca201f0635eecb15645cd4598bd49b1ad354e1ea81c24eb488760f3bd2b&dn=11.15.0-47U_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Sección VI - Configuración de región
+#### Section VI - Deleting system save data
-1. Entra a Configuración de la consola
-1. Ir a "Otros ajustes", "Perfil", y luego "Configuración de la región"
-1. Selecciona un país de la región a la que has cambiado
-1. Si se solicita, no necesitas establecer un estado
-
-#### Sección VII - Borrar la imagen de CTRTransfer
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/es_ES/site-navigation.txt b/_pages/es_ES/site-navigation.txt
index 5607f6e1f1..7a4ca8f3cb 100644
--- a/_pages/es_ES/site-navigation.txt
+++ b/_pages/es_ES/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Comprobar CFW](checking-for-cfw)
+ [Contribuciones](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Volcar títulos y cartuchos de juego](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [Usos de GodMode9](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Inicio](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Instalar boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Instalar boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Instalar boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Instalar boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Instalar boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Instalar boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/es_ES/troubleshooting.txt b/_pages/es_ES/troubleshooting.txt
index 2c8d0f8dd4..86295fd171 100644
--- a/_pages/es_ES/troubleshooting.txt
+++ b/_pages/es_ES/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. Deberías ir a [Comprobación de CFW](checking-for-cfw) antes de continuar.
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizar instalación
diff --git a/_pages/fi_FI/bannerbomb3.txt b/_pages/fi_FI/bannerbomb3.txt
index e385580106..a719633bc9 100644
--- a/_pages/fi_FI/bannerbomb3.txt
+++ b/_pages/fi_FI/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### Tarpeet
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Vaihe I – Valmistelut
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/fi_FI/ctrtransfer.txt b/_pages/fi_FI/ctrtransfer.txt
index 85e52f9f84..f3d572a080 100644
--- a/_pages/fi_FI/ctrtransfer.txt
+++ b/_pages/fi_FI/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD-korttisi `/luma/payloads`‑kansiossa, (START)-painikkeen pohjassa pitäminen käynnistyksen aikana avaa "ketjulatausvalikon", jossa sinun on käytettävä ristiohjainta ja (A):ta avataksesi GodMode9:n näitä ohjeita varten.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap käyttääksesi tätä ohjetta.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### Tarpeet
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Vaihe V – CTRTransfer-näköistiedoston poistaminen
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/fi_FI/dumping-movable-(nimhax).txt b/_pages/fi_FI/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..270eef4552
--- /dev/null
+++ b/_pages/fi_FI/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Sisällysluettelo" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Tarpeet
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Ohjeet
+
+#### Vaihe I – Valmistelut
+
+1. Sammuta konsolisi
+1. Aseta SD-korttisi tietokoneeseesi
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Aseta SD-korttisi takaisin konsoliisi
+1. Käynnistä konsolisi
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/fi_FI/finalizing-setup.txt b/_pages/fi_FI/finalizing-setup.txt
index 4a0a29b1c3..a0ba2b3a3e 100644
--- a/_pages/fi_FI/finalizing-setup.txt
+++ b/_pages/fi_FI/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### Tarpeet
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Päivitä konsolisi menemällä järjestelmäasetuksiin (System Settings), valitse muut asetukset (Other Settings) ja sitten järjestelmäpäivitys (System Update) viimeiseltä sivulta
- + Päivitykset B9S + Luma -kokoonpanolla (joka sinulla on) ovat turvallisia
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/fi_FI/get-started.txt b/_pages/fi_FI/get-started.txt
index 67ccbdbd66..972be502cd 100644
--- a/_pages/fi_FI/get-started.txt
+++ b/_pages/fi_FI/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/fi_FI/homebrew-launcher-(super-skaterhax).txt b/_pages/fi_FI/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..e07835b3d2
--- /dev/null
+++ b/_pages/fi_FI/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Sisällysluettelo" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### Tarpeet
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Sammuta konsolisi
+1. Aseta SD-korttisi tietokoneeseesi
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Aseta SD-korttisi takaisin konsoliisi
+1. Käynnistä konsolisi
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Paina (A):ta jatkaaksesi
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Sammuta konsolisi
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/fi_FI/include/addproxy.txt b/_pages/fi_FI/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/fi_FI/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/fi_FI/include/ctrnand-datayeet.txt b/_pages/fi_FI/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..78ffac893c
--- /dev/null
+++ b/_pages/fi_FI/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Sammuta konsolisi
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Mene hakemistoon `[0:] SDCARD` → `gm9`
+1. Paina (X):ää CTRTransfer-`.bin`-näköistiedoston kohdalla poistaaksesi sen
+1. Paina (A)-painiketta vahvistaaksesi
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Paina (A):ta jatkaaksesi
+1. While still highlighting `00010017`, press (X) to delete it
+1. Paina (A)-painiketta vahvistaaksesi
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Paina (A):ta lukitaksesi kirjoitusoikeudet kehotettaessa
+1. Paina (START)-painiketta käynnistääksesi uudelleen
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/fi_FI/include/exploit-usm.txt b/_pages/fi_FI/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/fi_FI/include/exploit-usm.txt
+++ b/_pages/fi_FI/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/fi_FI/include/rmproxy.txt b/_pages/fi_FI/include/rmproxy.txt
new file mode 100644
index 0000000000..b20e2aa25f
--- /dev/null
+++ b/_pages/fi_FI/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Sammuta konsolisi
diff --git a/_pages/fi_FI/include/safemodecheck.txt b/_pages/fi_FI/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/fi_FI/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/fi_FI/include/sysupdate.txt b/_pages/fi_FI/include/sysupdate.txt
new file mode 100644
index 0000000000..25f2fa114e
--- /dev/null
+++ b/_pages/fi_FI/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Päivitä konsolisi menemällä järjestelmäasetuksiin (System Settings), valitse muut asetukset (Other Settings) ja sitten järjestelmäpäivitys (System Update) viimeiseltä sivulta
+{%- if include.cfw == "true" %}
+ + Päivitykset B9S + Luma -kokoonpanolla (joka sinulla on) ovat turvallisia
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/fi_FI/installing-boot9strap-(frogtool).txt b/_pages/fi_FI/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..fc455f22ba
--- /dev/null
+++ b/_pages/fi_FI/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Sisällysluettelo" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### Tarpeet
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Sammuta konsolisi
+1. Aseta SD-korttisi tietokoneeseesi
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Aseta SD-korttisi takaisin konsoliisi
+1. Käynnistä konsolisi
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Avaa Download Play -sovellus
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Valitse "Miscellaneous options"
+1. Valitse "Switch the hb. title to the current app."
+1. Paina (B):tä jatkaaksesi
+1. Paina (B):tä palataksesi Rosalinan päävalikkoon
+1. Paina (B):tä poistuaksesi Rosalina-valikosta
+1. Paina (HOME)-painiketta ja sulje Download Play
+1. Relaunch the Download Play application
+1. Konsolisi pitäisi avata Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Sammuta konsolisi
+
+___
+
+### Jatka osioon [Asennuksen viimeistely](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt b/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt
index f6721d54a6..3be7886a90 100644
--- a/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Käynnistä konsolisi
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Vaihe III – Boot9strapin asentaminen
diff --git a/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt b/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt
index 7f30435ad3..ff72994a0f 100644
--- a/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### Tarpeet
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/fi_FI/installing-boot9strap-(safecerthax).txt b/_pages/fi_FI/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..81e2b4dfe0
--- /dev/null
+++ b/_pages/fi_FI/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Sisällysluettelo" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### Tarpeet
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Ohjeet
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Aseta SD-korttisi tietokoneeseesi
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Luo `boot9strap`-niminen kansio SD-korttisi juureen
+1. Kopioi boot9strap-`.zip`-pakkauksesta `boot9strap.firm` ja `boot9strap.firm.sha` SD-korttisi `/boot9strap/`-kansioon
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Aseta SD-korttisi takaisin konsoliisi
+1. Käynnistä konsolisi
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Sammuta konsolisi
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. Jos haavoittuvuuden hyödyntäminen onnistui, SafeB9SInstallerin pitäisi avautua
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Jatka osioon [Asennuksen viimeistely](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/fi_FI/installing-boot9strap-(ssloth-browser).txt b/_pages/fi_FI/installing-boot9strap-(ssloth-browser).txt
index 5b0b802aee..94512c0a3f 100644
--- a/_pages/fi_FI/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/fi_FI/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Sammuta konsolisi
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/fi_FI/installing-boot9strap-(usm).txt b/_pages/fi_FI/installing-boot9strap-(usm).txt
index f068fb8ea7..ba44a9f7bc 100644
--- a/_pages/fi_FI/installing-boot9strap-(usm).txt
+++ b/_pages/fi_FI/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/fi_FI/region-changing.txt b/_pages/fi_FI/region-changing.txt
index 17d15bf63c..b5133188b2 100644
--- a/_pages/fi_FI/region-changing.txt
+++ b/_pages/fi_FI/region-changing.txt
@@ -6,11 +6,15 @@ title: "Alueen vaihtaminen"
### Tärkeää tietoa
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD-korttisi `/luma/payloads`‑kansiossa, (START)-painikkeen pohjassa pitäminen käynnistyksen aikana avaa "ketjulatausvalikon", jossa sinun on käytettävä ristiohjainta ja (A):ta avataksesi GodMode9:n näitä ohjeita varten.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap käyttääksesi tätä ohjetta.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### Tarpeet
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Avaa järjestelmäasetukset (System Settings)
-1. Mene muihin asetuksiin (Other Settings), valitse profiili (Profile) ja sitten alueasetukset (Region Settings)
-1. Valitse maa, joka vastaa sitä aluetta, johon vaihdoit
-1. Aseta kehotettaessa myös osavaltio/lääni
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/fi_FI/site-navigation.txt b/_pages/fi_FI/site-navigation.txt
index 25fd3758af..b014b9c180 100644
--- a/_pages/fi_FI/site-navigation.txt
+++ b/_pages/fi_FI/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9:n käyttäminen](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Etusivu](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Boot9strapin asentaminen (laitteistomodaus)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Boot9strapin asentaminen (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/fi_FI/troubleshooting.txt b/_pages/fi_FI/troubleshooting.txt
index 641a4d7d72..cbd4e0ff37 100644
--- a/_pages/fi_FI/troubleshooting.txt
+++ b/_pages/fi_FI/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/fr_FR/bannerbomb3.txt b/_pages/fr_FR/bannerbomb3.txt
index 1d8c8dac83..128bd61e9b 100644
--- a/_pages/fr_FR/bannerbomb3.txt
+++ b/_pages/fr_FR/bannerbomb3.txt
@@ -26,7 +26,7 @@ Si vous possédez une console taïwanaise (indiquée par un T après la version
### Ce dont vous avez besoin
-* Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Préparatifs
@@ -58,11 +58,7 @@ Dans cette section, vous allez copier les fichiers nécessaires pour déclencher
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. Lorsque votre console est encore éteinte, maintenez les boutons suivants : (L) + (R) + (Haut sur la croix directionnelle) + (A), et tout en maintenant ces boutons enfoncés, allumez votre console
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Votre console va s'éteindre
- + Si la console démarre à partir du menu HOME, éteignez simplement votre console
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/fr_FR/ctrtransfer.txt b/_pages/fr_FR/ctrtransfer.txt
index 719440d6e7..45ec5ff777 100644
--- a/_pages/fr_FR/ctrtransfer.txt
+++ b/_pages/fr_FR/ctrtransfer.txt
@@ -8,17 +8,15 @@ title : "CTRTransfer"
Ceci est une section complémentaire pour installer une image CTRTransfer 11.15.0 sur votre console.
-Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyer sur (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" .
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci.
-{: .notice--danger}
-
-Effectuer un CTRTransfer peut empêcher le bon fonctionnement des jeux en mode mémoire étendue (Monster Hunter, Super Smash Bros., Pokémon Soleil/Lune) sur les anciennes 3DS/2DS. Si cela se produit, vous devrez formater l'appareil (en utilisant TinyFormat ou les Paramètres de la console) pour résoudre le problème.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
## Ce dont vous avez besoin
-Pour utiliser les liens [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) sur cette page, vous aurez besoin d'un client torrent comme [qBittorrent](https://www.qbittorrent.org/download.php) ou [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* La dernière version de [GodMode9]
@@ -56,9 +54,9 @@ Pour utiliser les liens [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) s
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Suppression de l'image CTRTransfer
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/fr_FR/dumping-movable-(nimhax).txt b/_pages/fr_FR/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..12b03d9693
--- /dev/null
+++ b/_pages/fr_FR/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table des matières" %}
+
+{% capture technical_info %}
+Détails techniques (facultatif)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+## Ce dont vous avez besoin
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Préparatifs
+
+1. Éteignez votre 3DS
+1. Insérez votre carte SD dans votre ordinateur
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Retirez la carte SD de votre ordinateur et réinsérez-là dans votre 3DS
+1. Allumez votre console
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/fr_FR/finalizing-setup.txt b/_pages/fr_FR/finalizing-setup.txt
index 9dc5aa7841..61c1f3f512 100644
--- a/_pages/fr_FR/finalizing-setup.txt
+++ b/_pages/fr_FR/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
## Ce dont vous avez besoin
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -71,11 +71,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Mettez à jour votre console en vous rendant dans les Paramètres de la console, puis "Autres paramètres", puis tout à droite sur l'option "Mise à jour"
- + Mettre à jour tout en ayant B9S + Luma (ce que vous avez) est sans danger
- + La console peut afficher un message disant "Aucune mise à jour nécessaire" au lieu de faire une mise à jour. Ceci est normal si vous êtes déjà à jour ; continuez vers la section suivante
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/fr_FR/get-started.txt b/_pages/fr_FR/get-started.txt
index 136079b2ce..181e8acd1c 100644
--- a/_pages/fr_FR/get-started.txt
+++ b/_pages/fr_FR/get-started.txt
@@ -25,6 +25,10 @@ Si vous voyez un menu inhabituel, STOP - vous avez déjà un custom firmware ! C
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Méthodes alternatives
diff --git a/_pages/fr_FR/homebrew-launcher-(super-skaterhax).txt b/_pages/fr_FR/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..6f981254f2
--- /dev/null
+++ b/_pages/fr_FR/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table des matières" %}
+
+{% capture technical_info %}
+Détails techniques (facultatif)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Notes de compatibilité
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+## Ce dont vous avez besoin
+
+* La dernière version de [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (le fichier `.zip' de Luma3DS)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Préparatifs
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Éteignez votre 3DS
+1. Insérez votre carte SD dans votre ordinateur
+1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD
+ + La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Retirez la carte SD de votre ordinateur et réinsérez-là dans votre 3DS
+1. Allumez votre console
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Appuyez sur (A) pour continuer
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Éteignez votre 3DS
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/fr_FR/include/addproxy.txt b/_pages/fr_FR/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/fr_FR/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/fr_FR/include/ctrnand-datayeet.txt b/_pages/fr_FR/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..c5307882e6
--- /dev/null
+++ b/_pages/fr_FR/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Éteignez votre 3DS
+1. Appuyez sur le bouton (START) et maintenez le enfoncé tout en allumant votre console. Ceci lancera GodMode9
+1. Naviguez vers `[0:] SDCARD` -> `gm9`
+1. Pressez (X) sur le `.bin` de l'image CTRTransfer pour le supprimer
+1. Appuyez sur (A) pour confirmer
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Sélectionnez "Copy to 0:/gm9/out"
+1. Appuyez sur (A) pour continuer
+1. While still highlighting `00010017`, press (X) to delete it
+1. Appuyez sur (A) pour confirmer
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Appuyez (A) pour reverrouiller autorisations en écriture si vous êtes invité
+1. Appuyez sur (Start) pour redémarrer votre système
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/fr_FR/include/exploit-usm.txt b/_pages/fr_FR/include/exploit-usm.txt
index 6b0cd152fa..341c596e6e 100644
--- a/_pages/fr_FR/include/exploit-usm.txt
+++ b/_pages/fr_FR/include/exploit-usm.txt
@@ -2,11 +2,6 @@ Dans cette section, vous passerez en mode sans échec (une fonctionnalité dispo
1. Lorsque votre console encore éteinte, maintenez enfoncés les boutons suivants : (L) + (R) + (Haut sur la croix directionnelle) + (A), et tout en maintenant ces boutons enfoncés, allumez votre console
+ Maintenez les boutons enfoncés jusqu'à ce que la console démarre en mode sans échec (menu "Mise à jour")
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + Si malgré vos tentatives, vous n'arrivez pas à accéder au mode sans échec, l'un des boutons de votre console est peut-être dysfonctionnel ou endommagé. Si c'est le cas, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide, en anglais.
-{%- elsif include.method == "bb3" %}
- + Si malgré vos tentatives, vous n'arrivez pas à accéder au mode sans échec, l'un des boutons de votre console est peut-être dysfonctionnel ou endommagé. Si c'est le cas, vous devrez suivre [une méthode d'installation alternative de BannerBomb3](installing-boot9strap-(fredtool)). Pour obtenir de l'aide à ce sujet, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide, en anglais.
-{%- endif %}
1. Appuyez sur "OK" pour accepter la mise à jour
+ Aucune mise à jour n'est nécessaire. Ceci fait partie de l'exploit
1. Appuyez sur « J'accepte » pour accepter les conditions
@@ -14,3 +9,5 @@ Dans cette section, vous passerez en mode sans échec (une fonctionnalité dispo
1. Lorsque votre console vous demande "Paramétrer la connexion Internet de la console ?", sélectionnez "Paramétrer"
1. Dans le menu suivant, accédez à `Connexion 1` -> `Modifier` -> `Page suivante (flèche de droite)` -> `Serveur proxy` -> `Paramètres avancés ([image](/images/screenshots/usm/safemode_highlighted.png))
1. Si l'exploit a réussi, votre console devrait avoir démarré sur SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/fr_FR/include/rmproxy.txt b/_pages/fr_FR/include/rmproxy.txt
new file mode 100644
index 0000000000..a098eeb7d6
--- /dev/null
+++ b/_pages/fr_FR/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Éteignez votre 3DS
diff --git a/_pages/fr_FR/include/safemodecheck.txt b/_pages/fr_FR/include/safemodecheck.txt
new file mode 100644
index 0000000000..1cf2909e3c
--- /dev/null
+++ b/_pages/fr_FR/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. Lorsque votre console encore éteinte, maintenez enfoncés les boutons suivants : (L) + (R) + (Haut sur la croix directionnelle) + (A), et tout en maintenant ces boutons enfoncés, allumez votre console
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Votre console va s'éteindre
+ + Si la console démarre à partir du menu HOME, éteignez simplement votre console
diff --git a/_pages/fr_FR/include/sysupdate.txt b/_pages/fr_FR/include/sysupdate.txt
new file mode 100644
index 0000000000..6fdee52b27
--- /dev/null
+++ b/_pages/fr_FR/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Mettez à jour votre console en vous rendant dans les Paramètres de la console, puis "Autres paramètres", puis tout à droite sur l'option "Mise à jour"
+{%- if include.cfw == "true" %}
+ + Mettre à jour tout en ayant B9S + Luma (ce que vous avez) est sans danger
+{%- endif %}
+ + La console peut afficher un message disant "Aucune mise à jour nécessaire" au lieu de faire une mise à jour. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/fr_FR/installing-boot9strap-(frogtool).txt b/_pages/fr_FR/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..b09751d315
--- /dev/null
+++ b/_pages/fr_FR/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table des matières" %}
+
+{% capture technical_info %}
+Détails techniques (facultatif)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+## Ce dont vous avez besoin
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - Vérification de la présence d’un CFW
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Préparatifs
+
+1. Éteignez votre 3DS
+1. Insérez votre carte SD dans votre ordinateur
+1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Retirez la carte SD de votre ordinateur et réinsérez-là dans votre 3DS
+1. Allumez votre console
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. Si l'exploit a réussi, votre console devrait avoir démarré la version japonaise de Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Lancez l’application Mode téléchargement
+1. Attendez jusqu'à ce que vous voyiez les deux boutons
+ + N'appuyez sur aucun des deux boutons
+1. Appuyez simultanément sur (L) + (Bas sur la croix directionnelle) + (Select) pour ouvrir le menu Rosalina
+1. Sélectionnez "Miscellaneous options"
+1. Sélectionnez "Switch the hb. title to the current app."
+1. Appuyez sur (B) pour continuer
+1. Appuyez sur (B) pour revenir au menu principal de Rosalina
+1. Appuyez sur (B) pour quitter le menu Rosalina
+1. Appuyez sur (Home), puis fermez Mode téléchargement
+1. Relancez l’application Mode téléchargement
+1. Votre console devrait maintenant charger le Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Éteignez votre 3DS
+
+___
+
+### Continuer vers [Finalisation de l'installation](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt b/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt
index aa1ee1b5ef..64758b2b7f 100644
--- a/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Allumez votre console
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Lancez slotTool depuis la liste des homebrews
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installation de boot9strap
diff --git a/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt b/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt
index 320f780222..b32ebd4e48 100644
--- a/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ Pour suivre ces instructions, vous aurez besoin de ceci :
- Une copie physique ou numérique de Mario Kart 7 qui est de la même région que les deux consoles
- Une carte SD pour les deux consoles
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
## Ce dont vous avez besoin
Sur la **3DS source** (la 3DS avec un firmware custom) :
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
Sur la **3DS cible** (la 3DS que vous essayez de modifier):
@@ -47,7 +44,14 @@ Sur la **3DS cible** (la 3DS que vous essayez de modifier):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. Si c'est le cas, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide, en anglais.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/fr_FR/installing-boot9strap-(safecerthax).txt b/_pages/fr_FR/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..0ccb32b7ff
--- /dev/null
+++ b/_pages/fr_FR/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table des matières" %}
+
+{% capture technical_info %}
+Détails techniques (facultatif)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Notes de compatibilité
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+## Ce dont vous avez besoin
+
+* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (téléchargement direct)
+* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (téléchargement direct)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Préparatifs
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insérez votre carte SD dans votre ordinateur
+1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD
+ + La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier
+1. Créez un dossier à la racine de votre carte SD nommé `boot9strap`
+1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD
+1. Copiez `SafeB9SInstaller.bin` depuis le fichier `.zip` de SafeB9SInstaller à la racine de votre carte SD
+1. Retirez la carte SD de votre ordinateur et réinsérez-là dans votre 3DS
+1. Allumez votre console
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Éteignez votre 3DS
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. Lorsque votre console encore éteinte, maintenez enfoncés les boutons suivants : (L) + (R) + (Haut sur la croix directionnelle) + (A), et tout en maintenant ces boutons enfoncés, allumez votre console
+ + Maintenez les boutons enfoncés jusqu'à ce que la console démarre en mode sans échec (menu "Mise à jour")
+1. Appuyez sur "OK" pour accepter la mise à jour
+ + Aucune mise à jour n'est nécessaire. Ceci fait partie de l'exploit
+1. Appuyez sur « J'accepte » pour accepter les conditions
+1. La mise à jour finira par échouer, avec le code d'erreur `003-1099`. Ne vous inquiétez pas, c'est normal.
+1. Press "OK" to close the error message
+1. Si l'exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continuer vers [Finalisation de l'installation](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/fr_FR/installing-boot9strap-(ssloth-browser).txt b/_pages/fr_FR/installing-boot9strap-(ssloth-browser).txt
index a0c5a26968..db8e335fd2 100644
--- a/_pages/fr_FR/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/fr_FR/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Éteignez votre 3DS
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/fr_FR/installing-boot9strap-(usm).txt b/_pages/fr_FR/installing-boot9strap-(usm).txt
index e0d41d6c23..145bd4271c 100644
--- a/_pages/fr_FR/installing-boot9strap-(usm).txt
+++ b/_pages/fr_FR/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/fr_FR/region-changing.txt b/_pages/fr_FR/region-changing.txt
index 4ddcd77423..513a967319 100644
--- a/_pages/fr_FR/region-changing.txt
+++ b/_pages/fr_FR/region-changing.txt
@@ -6,11 +6,15 @@ title: "Changement de Région"
### Lecture requise
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" .
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. Si cela se produit, vous devrez formater la console (en utilisant TinyFormat ou les Paramètres de la console) pour résoudre le problème.
-{: .notice--warning}
-
## Ce dont vous avez besoin
-Pour utiliser les liens [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) sur cette page, vous aurez besoin d'un client torrent comme [qBittorrent](https://www.qbittorrent.org/download.php) ou [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* La dernière version de [GodMode9]
@@ -73,15 +73,11 @@ Pour utiliser les liens [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) s
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Paramètres de région
+#### Section VI - Deleting system save data
-1. Ouvrez les Paramètres de la console
-1. Allez dans "Autres paramètres", "Profil", puis "Région"
-1. Sélectionnez un pays dans la région que vous venez de paramétrer
-1. Vous n'avez pas besoin de choisir un État si on vous le demande
-
-#### Section VII - Suppression de l'image de CTRTransfer
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/fr_FR/site-navigation.txt b/_pages/fr_FR/site-navigation.txt
index e62b413af2..bfc16ea303 100644
--- a/_pages/fr_FR/site-navigation.txt
+++ b/_pages/fr_FR/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Vérification de la présence d'un CFW](checking-for-cfw)
+ [Contribuer](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dump de titres et de cartes de jeu](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [Utilisation de GodMode9](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/fr_FR/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installation de boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installation de boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installation de boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installation de boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installation de boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installation de boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/fr_FR/troubleshooting.txt b/_pages/fr_FR/troubleshooting.txt
index f7924b0380..bce3de90b5 100644
--- a/_pages/fr_FR/troubleshooting.txt
+++ b/_pages/fr_FR/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/he_IL/bannerbomb3.txt b/_pages/he_IL/bannerbomb3.txt
index b2744a6637..cf02eaa508 100644
--- a/_pages/he_IL/bannerbomb3.txt
+++ b/_pages/he_IL/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### חלק I - הכנות
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/he_IL/ctrtransfer.txt b/_pages/he_IL/ctrtransfer.txt
index bb4eee952a..7741728b70 100644
--- a/_pages/he_IL/ctrtransfer.txt
+++ b/_pages/he_IL/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-שימו לב שאם יש לכם קבצי מטען אחרים מ`GodMode9.firm` בתיקיית `/luma/payloads/` על כרטיס הSD שלכם, החזקת (Start) בהפעלה תציג תפריט שבו תצטרכו להשתמש בחיצים ובכפתור ה(A) כדי לבחור ב"GodMode9" בשביל ההוראות האלה.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-אתם חייבים שLuma3DS וboot9strap יהיו מותקנים כדי להשתמש בזה.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### חלק V - מחיקת ה CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/he_IL/dumping-movable-(nimhax).txt b/_pages/he_IL/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..6836650851
--- /dev/null
+++ b/_pages/he_IL/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="תוכן העניינים" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### הנחיות
+
+#### חלק I - הכנות
+
+1. תכבו את המכשיר
+1. תכניסו את ה-SD שלכם למחשב
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
+1. תפעילו את המכשיר
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/he_IL/finalizing-setup.txt b/_pages/he_IL/finalizing-setup.txt
index c5e5d6d424..0663bc6b1e 100644
--- a/_pages/he_IL/finalizing-setup.txt
+++ b/_pages/he_IL/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. עדכנו את המכשיר שלכם על ידי לחיצה על System Sttings, לאחר מכן "Other Settings", לכו ימינה עד הסוף ואז לחצו על "System Update"
- + עדכונים שתבצעו תוך שימוש ב-B9S+Luma (במידה שיש לכם את שניהם) הם בטוחים לחלוטין
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/he_IL/get-started.txt b/_pages/he_IL/get-started.txt
index e96527e853..ceb37326f8 100644
--- a/_pages/he_IL/get-started.txt
+++ b/_pages/he_IL/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/he_IL/homebrew-launcher-(super-skaterhax).txt b/_pages/he_IL/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..805d6fa26c
--- /dev/null
+++ b/_pages/he_IL/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="תוכן העניינים" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. תכבו את המכשיר
+1. תכניסו את ה-SD שלכם למחשב
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
+1. תפעילו את המכשיר
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. תלחצו (A) כדי להמשיך
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. תכבו את המכשיר
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/he_IL/include/addproxy.txt b/_pages/he_IL/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/he_IL/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/he_IL/include/ctrnand-datayeet.txt b/_pages/he_IL/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..ee30a3f1fd
--- /dev/null
+++ b/_pages/he_IL/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. תכבו את המכשיר
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. נווטו אל `[0:] SDCARD` ושם אל `gm9`
+1. תלחצו (X) על קובץ ה`.bin` של הCTRTransfer כדי למחוק אותו
+1. תלחצו (A) כדי לאשר
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. תלחצו (A) כדי להמשיך
+1. While still highlighting `00010017`, press (X) to delete it
+1. תלחצו (A) כדי לאשר
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. תלחצו (A) כדי לנעול הרשאות כתיבה אם תתבקשו
+1. תלחצו על (Start) כדי לאתחל את המכשיר
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/he_IL/include/exploit-usm.txt b/_pages/he_IL/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/he_IL/include/exploit-usm.txt
+++ b/_pages/he_IL/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/he_IL/include/rmproxy.txt b/_pages/he_IL/include/rmproxy.txt
new file mode 100644
index 0000000000..91876a3870
--- /dev/null
+++ b/_pages/he_IL/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. תכבו את המכשיר
diff --git a/_pages/he_IL/include/safemodecheck.txt b/_pages/he_IL/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/he_IL/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/he_IL/include/sysupdate.txt b/_pages/he_IL/include/sysupdate.txt
new file mode 100644
index 0000000000..eb46318c3a
--- /dev/null
+++ b/_pages/he_IL/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. עדכנו את המכשיר שלכם על ידי לחיצה על System Sttings, לאחר מכן "Other Settings", לכו ימינה עד הסוף ואז לחצו על "System Update"
+{%- if include.cfw == "true" %}
+ + עדכונים שתבצעו תוך שימוש ב-B9S+Luma (במידה שיש לכם את שניהם) הם בטוחים לחלוטין
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/he_IL/installing-boot9strap-(frogtool).txt b/_pages/he_IL/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..9ef6c2f190
--- /dev/null
+++ b/_pages/he_IL/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="תוכן העניינים" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. תכבו את המכשיר
+1. תכניסו את ה-SD שלכם למחשב
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
+1. תפעילו את המכשיר
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. תפעילו את Download Play
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. תבחרו ב "Miscellaneous options"
+1. תבחרו ב "Switch the hb. title to the current app."
+1. תלחצו (B) כדי להמשיך
+1. תלחצו (B) כדי לחזור לתפריט הראשי של Rosalina
+1. תלחצו (B) כדי לצאת מהתפריט של Rosalina
+1. תלחצו על (Home), ואז תסגרו את Download Play
+1. Relaunch the Download Play application
+1. המכשיר שלכם אמור לטעון את הHomebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. תכבו את המכשיר
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/he_IL/installing-boot9strap-(hbl-usm).txt b/_pages/he_IL/installing-boot9strap-(hbl-usm).txt
index 70eaa0d02e..527034a74c 100644
--- a/_pages/he_IL/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/he_IL/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. תפעילו את המכשיר
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### חלק III - התקנת boot9strap
diff --git a/_pages/he_IL/installing-boot9strap-(kartdlphax).txt b/_pages/he_IL/installing-boot9strap-(kartdlphax).txt
index d1e61a65b5..639d562f90 100644
--- a/_pages/he_IL/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/he_IL/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/he_IL/installing-boot9strap-(safecerthax).txt b/_pages/he_IL/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..1955922091
--- /dev/null
+++ b/_pages/he_IL/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="תוכן העניינים" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### הנחיות
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. תכניסו את ה-SD שלכם למחשב
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap`
+1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
+1. תפעילו את המכשיר
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. תכבו את המכשיר
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/he_IL/installing-boot9strap-(ssloth-browser).txt b/_pages/he_IL/installing-boot9strap-(ssloth-browser).txt
index 80c211c7b4..43fbf91f7f 100644
--- a/_pages/he_IL/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/he_IL/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. תכבו את המכשיר
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/he_IL/installing-boot9strap-(usm).txt b/_pages/he_IL/installing-boot9strap-(usm).txt
index b9e68db6c5..19f4170b3e 100644
--- a/_pages/he_IL/installing-boot9strap-(usm).txt
+++ b/_pages/he_IL/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/he_IL/region-changing.txt b/_pages/he_IL/region-changing.txt
index 1bb905c19e..8012be9bcf 100644
--- a/_pages/he_IL/region-changing.txt
+++ b/_pages/he_IL/region-changing.txt
@@ -6,11 +6,15 @@ title: "שינוי אזור"
### קריאה דרושה
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-שימו לב שאם יש לכם קבצי מטען אחרים מ`GodMode9.firm` בתיקיית `/luma/payloads/` על כרטיס הSD שלכם, החזקת (Start) בהפעלה תציג תפריט שבו תצטרכו להשתמש בחיצים ובכפתור ה(A) כדי לבחור ב"GodMode9" בשביל ההוראות האלה.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-אתם חייבים שLuma3DS וboot9strap יהיו מותקנים כדי להשתמש בזה.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. פתחו את הגדרות המערכת
-1. לכו ל Other settings, אז Profile, ולבסוף Region settings
-1. תבחרו מדינה מהאזור שהחלפתם אליו
-1. אם תתבקשו, אתם לא צריכים להגדיר אזור
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/he_IL/site-navigation.txt b/_pages/he_IL/site-navigation.txt
index 920426ac59..eca40250fb 100644
--- a/_pages/he_IL/site-navigation.txt
+++ b/_pages/he_IL/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [בית](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [התקנת boot9strap (הלחמה)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [התקנת boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/he_IL/troubleshooting.txt b/_pages/he_IL/troubleshooting.txt
index e2e2da9499..81c0950ed2 100644
--- a/_pages/he_IL/troubleshooting.txt
+++ b/_pages/he_IL/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/hr_HR/bannerbomb3.txt b/_pages/hr_HR/bannerbomb3.txt
index 5a11fffeff..0bf8e2d4a0 100644
--- a/_pages/hr_HR/bannerbomb3.txt
+++ b/_pages/hr_HR/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/hr_HR/ctrtransfer.txt b/_pages/hr_HR/ctrtransfer.txt
index 7d28b44618..b4ddf12625 100644
--- a/_pages/hr_HR/ctrtransfer.txt
+++ b/_pages/hr_HR/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/hr_HR/dumping-movable-(nimhax).txt b/_pages/hr_HR/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..1621a85165
--- /dev/null
+++ b/_pages/hr_HR/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/hr_HR/finalizing-setup.txt b/_pages/hr_HR/finalizing-setup.txt
index 99a2426cc8..5e4e918277 100644
--- a/_pages/hr_HR/finalizing-setup.txt
+++ b/_pages/hr_HR/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/hr_HR/get-started.txt b/_pages/hr_HR/get-started.txt
index 6b86afa5d6..fd65fe67fa 100644
--- a/_pages/hr_HR/get-started.txt
+++ b/_pages/hr_HR/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/hr_HR/homebrew-launcher-(super-skaterhax).txt b/_pages/hr_HR/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..6f4daef090
--- /dev/null
+++ b/_pages/hr_HR/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/hr_HR/include/addproxy.txt b/_pages/hr_HR/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/hr_HR/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/hr_HR/include/ctrnand-datayeet.txt b/_pages/hr_HR/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..6749b1d1bc
--- /dev/null
+++ b/_pages/hr_HR/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/hr_HR/include/exploit-usm.txt b/_pages/hr_HR/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/hr_HR/include/exploit-usm.txt
+++ b/_pages/hr_HR/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/hr_HR/include/rmproxy.txt b/_pages/hr_HR/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/hr_HR/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/hr_HR/include/safemodecheck.txt b/_pages/hr_HR/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/hr_HR/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/hr_HR/include/sysupdate.txt b/_pages/hr_HR/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/hr_HR/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/hr_HR/installing-boot9strap-(frogtool).txt b/_pages/hr_HR/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ddfc6a7304
--- /dev/null
+++ b/_pages/hr_HR/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt b/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt b/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/hr_HR/installing-boot9strap-(safecerthax).txt b/_pages/hr_HR/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..075e190486
--- /dev/null
+++ b/_pages/hr_HR/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/hr_HR/installing-boot9strap-(ssloth-browser).txt b/_pages/hr_HR/installing-boot9strap-(ssloth-browser).txt
index bfd7771226..e5beafbea0 100644
--- a/_pages/hr_HR/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/hr_HR/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/hr_HR/installing-boot9strap-(usm).txt b/_pages/hr_HR/installing-boot9strap-(usm).txt
index 6f9a1eb70c..4e326ff6d3 100644
--- a/_pages/hr_HR/installing-boot9strap-(usm).txt
+++ b/_pages/hr_HR/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/hr_HR/region-changing.txt b/_pages/hr_HR/region-changing.txt
index 9af30fe4b5..413fdb3c10 100644
--- a/_pages/hr_HR/region-changing.txt
+++ b/_pages/hr_HR/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/hr_HR/site-navigation.txt b/_pages/hr_HR/site-navigation.txt
index 40ef6b75b6..a2135747ab 100644
--- a/_pages/hr_HR/site-navigation.txt
+++ b/_pages/hr_HR/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/hr_HR/troubleshooting.txt b/_pages/hr_HR/troubleshooting.txt
index c8f2789ae4..4f46f113bb 100644
--- a/_pages/hr_HR/troubleshooting.txt
+++ b/_pages/hr_HR/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/hu_HU/bannerbomb3.txt b/_pages/hu_HU/bannerbomb3.txt
index 7f7df70577..55b370d298 100644
--- a/_pages/hu_HU/bannerbomb3.txt
+++ b/_pages/hu_HU/bannerbomb3.txt
@@ -26,7 +26,7 @@ Ha tajvani konzolod van (amit T betű jelez a rendszer verzió mögött), akkor
### Amire szükséged lesz
-* A `movable.sed` fájl a [Seedminer](seedminer)-ből
+* Your `movable.sed` file from completing Seedminer or nimhax
#### I. rész - Előkészületek
@@ -58,11 +58,7 @@ Ebben a fejezetben fel fogod másolni azokat a fájlokat az eszközöd SD kárty
Ebben a fejezetben tesztelni fogod azt, hogy egyáltalán eléred-e a SAFE_MODE funkcióját az eszközödnek. Ez meghatározza, hogy melyik metódust kell követned a következő oldalon.
-1. Az eszközöd kikapcsolt állapotában tartsd nyomva a következő gombokat: (Bal Váll) + (Jobb Váll) + (D-Pad Fel) + (A), majd ezen gombok nyomva tartása mellett kapcsold be az eszközöd
- + Tartsd nyomva a gombokat, amíg a konzolod be nem bootol a rendszer frissítés képernyőre (ez a Safe Mode)
-1. Ha a rendszer frissítés képernyőt látod, nyomj Cancel-t
- + Az eszközöd ki fog kapcsolni
- + Ha az eszközöd a HOME menübe bootol, csak kapcsold ki az eszközöd
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/hu_HU/ctrtransfer.txt b/_pages/hu_HU/ctrtransfer.txt
index e02ac2ae29..eee9e9b08d 100644
--- a/_pages/hu_HU/ctrtransfer.txt
+++ b/_pages/hu_HU/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
Ebben a kiegészítő részben a 11.15.0-s CTRTransfer képfájlt fogjuk az eszközödre telepíteni.
-Vedd figyelembe, hogy amennyiben van más payload fájl a `GodMode9.firm` fájlon kívül a `/luma/payloads/`mappában, indításkor a (Start) gombot lenyomva tartva a "chainloader menu" menü fog megjelenni. Itt a D-Pad és az (A) gomb segítségével válaszd a "GodMode9" opciót, hogy az alábbi utasításokat követhesd.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-Az alábbiak használatához már telepítened kellett a következőket: Luma3DS és boot9strap.
-{: .notice--danger}
-
-Egy CTRTransfer végrehajtása tönkre teheti a bővített memória módú játékokat (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) régi 3DS/2DS eszközökön. Ha ez előfordulna, formáznod kell az eszközödet (a TinyFormat vagy a System Settings használatával) a javításhoz.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### Amire szükséged lesz
-Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) linkeket ezen az oldalon, szükséged lesz egy torrent kliensre, mint például a [qBittorrent](https://www.qbittorrent.org/download.php) vagy a [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* A [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) legújabb kiadása (a GodMode9 `.zip` fájl)
@@ -55,9 +53,9 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### V. rész - CTRTransfer képfájl eltávolítása
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/hu_HU/dumping-movable-(nimhax).txt b/_pages/hu_HU/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..cfef409c34
--- /dev/null
+++ b/_pages/hu_HU/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Tartalomjegyzék" %}
+
+{% capture technical_info %}
+Technikai részletek (opcionális)
+
+A boot9strap telepítéséhez az eszközödre, megfejtjük az eszköz egyedi titkosító kulcsát. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Amire szükséged lesz
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Lépések
+
+#### I. rész - Előkészületek
+
+1. Kapcsold ki a készüléked
+1. Helyezd az SD kártyád a számítógépbe
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Tedd vissza az SD kártyád a készülékedbe
+1. Kapcsold be a készülékedet
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
++ Folytatás a [BannerBomb3](bannerbomb3)-mal
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/hu_HU/finalizing-setup.txt b/_pages/hu_HU/finalizing-setup.txt
index 703a02ac18..99e4302d91 100644
--- a/_pages/hu_HU/finalizing-setup.txt
+++ b/_pages/hu_HU/finalizing-setup.txt
@@ -31,7 +31,7 @@ Ha az előző egyedi firmware rendszered EmuNAND alapú volt és szeretnéd az E
### Amire szükséged lesz
* Az [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) legújabb kiadása (a `.cia` fájl)
-* A [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) v3.7.4 verziója (a `.cia` fájl)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* A [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) legújabb kiadása (a `.cia` fájl)
* Az [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) legújabb kiadása (a `.cia` fájl)
* Az [FBI](https://github.com/Steveice10/FBI/releases/latest) legújabb kiadása (**mindkét fájl**, a `.cia` és a `.3dsx` is szükséges)
@@ -70,11 +70,7 @@ Az alábbi képernyőképek mutatják az SD kártya minimális elrendezését ah
Ebben a fejezetben frissíteni fogod a rendszered a legutolsó verzióra, ami biztonságos az egyedi firmware-rel.
-1. Frissítsd az eszközödet következőképp. Lépj be a System Settings-be, majd az "Other settings"-be, ahol addig lépkedj jobbra, amíg a végére nem érsz. Itt válaszd a "System Update" opciót.
- + B9S és Luma használatakor (mint esetedben) biztonságosak a rendszerfrissítések
- + A frissítő elképzelhető, hogy megjeleníti a "Your system is up to date" üzenetet a frissítés helyett. Ez normális, ha már frissítettél; folytasd a következő szakasszal
- + Ha ez hibát ad, akkor állítsd a DNS és Proxy beállításodat egyaránt "auto"-ra
- + Ha továbbra is hibát kapsz, [kövesd ezt a hibaelhárítási útmutatót](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### III. rész - Homebrew Launcher
diff --git a/_pages/hu_HU/get-started.txt b/_pages/hu_HU/get-started.txt
index 097d2016f8..5f9e794743 100644
--- a/_pages/hu_HU/get-started.txt
+++ b/_pages/hu_HU/get-started.txt
@@ -25,6 +25,10 @@ Ha egy szokatlan menüt látsz ÁLLJ MEG - már vagy egyedi firmwared! Folytasd
A korrrekt metódushoz az eszközödhöz, kérjük add meg azt a rendszer verziót, amit a II. részben találtál.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
Ez nem tűnik egy érvényes rendszer verziónak.
{% endcapture %}
@@ -33,7 +37,7 @@ Ez nem tűnik egy érvényes rendszer verziónak.
Jelenleg nem tudod hackelni a 3DS-ed ezen a verzión a fő metódusokkal. Ha szeretnéd hackelni a konzolod, ntrbootot kell használnod.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternatív metódusok
diff --git a/_pages/hu_HU/homebrew-launcher-(super-skaterhax).txt b/_pages/hu_HU/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..f14aa51aa9
--- /dev/null
+++ b/_pages/hu_HU/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Tartalomjegyzék" %}
+
+{% capture technical_info %}
+Technikai részletek (opcionális)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Kompatibilitási megjegyzések
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### Amire szükséged lesz
+
+* A [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb kiadása (a Luma3DS `.zip` fájl)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### II. rész - Előkészületek
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Kapcsold ki a készüléked
+1. Helyezd az SD kártyád a számítógépbe
+1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe
+ + Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Tedd vissza az SD kártyád a készülékedbe
+1. Kapcsold be a készülékedet
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + Ha tanúsítvány figyelmeztetést kapsz, nyomd meg az (A) gombot a kapcsolat engedélyezéséhez
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Nyomd meg az (A) gombot a folytatáshoz
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Kapcsold ki a készüléked
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+Ha láttad a rendszer frissítés képernyőt az előző részben, a Safe Mode működik az eszközödön.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/hu_HU/include/addproxy.txt b/_pages/hu_HU/include/addproxy.txt
new file mode 100644
index 0000000000..5f594fc277
--- /dev/null
+++ b/_pages/hu_HU/include/addproxy.txt
@@ -0,0 +1,12 @@
+Ha még nenm történt meg, biztosítsd, hogy legyen működő Internet kapcsolata a konzolodnak.
+{: .notice--info}
+
+1. Indítsd el a System Settings alkalmazást
+1. Navigálj az `Internet Settings` -> `Connection Settings` opciókhoz
+1. Kattints a saját hálózati kapcsolatodra és navigálj a `Change Settings` -> `Next Page (jobb nyíl)` -> `Proxy Settings` opcióhoz
+1. Állítsd az "Proxy Settings"-t "Yes"-re majd kattints a `Detailed Setup`-ra
+1. Állítsd be a Proxy Server-t `192.9.234.11`-re, és a Port-ot `8080`-ra
+1. Kattints az OK-ra, majd kattints a Save-re
+1. Amikor kérdezi, kattints a "Test"-re a kapcsolat ellenőrzéséhez
+ + A tesztnek sikeresnek kell lennie
+1. Kattintson az OK gombra a folytatáshoz
diff --git a/_pages/hu_HU/include/ctrnand-datayeet.txt b/_pages/hu_HU/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..ead57b2c5b
--- /dev/null
+++ b/_pages/hu_HU/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Kapcsold ki a készüléked
+1. Nyomd le és tartsd nyomva a (Start) gombot, és a (Start) nyomva tartása mellett kapcsold be az eszközödet. Ez elindítja a GodMode9-et
+1. Menj ide: `[0:] SDCARD` -> `gm9`
+1. Nyomd meg az (X) gombot, miközben a CTRTransfer `.bin` van kijelölve, hogy kitöröld
+1. Nyomd meg az (A) gombot a megerősítéshez
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Válaszd ki ezt: "Copy to 0:/gm9/out"
+1. Nyomd meg az (A) gombot a folytatáshoz
+1. While still highlighting `00010017`, press (X) to delete it
+1. Nyomd meg az (A) gombot a megerősítéshez
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Nyomd meg az (A) gombot az írási engedélyek visszavonásához
+1. Nyomd meg a (Start) gombot az eszköz újraindításához
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/hu_HU/include/exploit-usm.txt b/_pages/hu_HU/include/exploit-usm.txt
index e21d08d0ae..00aa39af37 100644
--- a/_pages/hu_HU/include/exploit-usm.txt
+++ b/_pages/hu_HU/include/exploit-usm.txt
@@ -2,11 +2,6 @@ Ebben a fejezetben be fogsz lépni a Safe Mode-ba (egy funkció, ami elérhető
1. Az eszközöd kikapcsolt állapotában tartsd nyomva a következő gombokat: (Bal Váll) + (Jobb Váll) + (D-Pad Fel) + (A), majd ezen gombok nyomva tartása mellett kapcsold be az eszközöd
+ Tartsd nyomva a gombokat, amíg az eszköz be nem bootol a Safe Mode-ba (a "system update" menübe)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + Ha többszöri próbálkozásra sem tudsz bejutni a Safe Mode-ba, valamelyik gombod hibás lehet. Ebben az esetben csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és kérj, támogatást angolul.
-{%- elsif include.method == "bb3" %}
- + Ha többszöri próbálkozásra sem tudsz bejutni a Safe Mode-ba, valamelyik gombod hibás lehet. Ha ez a helyzet, akkor [a BannerBomb3 alternatív ágát](installing-boot9strap-(fredtool)) kell követned. Ha támogatásra van szükséged az anyaggal kapcsolatosan, csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és kérj, angolul, támogatást.
-{%- endif %}
1. Nyomj "OK"-ot a frissítés elfogadásához
+ Nincs frissítés. Ez része az exploitnak
1. Nyomj az "I accept"-re a feltételek elfogadásához
@@ -14,3 +9,5 @@ Ebben a fejezetben be fogsz lépni a Safe Mode-ba (egy funkció, ami elérhető
1. Amikor megkérdezésre kerül, hogy "Would you like to configure Internet settings?", válassz "Yes"-t
1. A következő menüben navigálj a `Connection 1` -> `Change Settings` -> `Next Page (jobb nyíl)` -> `Proxy Settings` -> `Detailed Setup` menüponthoz ([kép](/images/screenshots/usm/safemode_highlighted.png))
1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/hu_HU/include/rmproxy.txt b/_pages/hu_HU/include/rmproxy.txt
new file mode 100644
index 0000000000..77f78da0e3
--- /dev/null
+++ b/_pages/hu_HU/include/rmproxy.txt
@@ -0,0 +1,10 @@
+Ebben a fejezetben vissza fogod állítani az internet beállításokat a normálisra.
+
+1. Indítsd el a System Settings alkalmazást
+1. Navigálj az `Internet Settings` -> `Connection Settings` opciókhoz
+1. Kattints a saját hálózati kapcsolatodra és navigálj a `Change Settings` -> `Next Page (jobb nyíl)` -> `Proxy Settings` opcióhoz
+1. Állítsd a "Proxy Settings"-t "No"-ra
+1. Kattints az OK-ra, majd kattints a Save-re
+1. Amikor kérdezi, kattints a "Test"-re a kapcsolat ellenőrzéséhez
+ + A tesztnek sikeresnek kell lennie
+1. Kapcsold ki a készüléked
diff --git a/_pages/hu_HU/include/safemodecheck.txt b/_pages/hu_HU/include/safemodecheck.txt
new file mode 100644
index 0000000000..f6c2ab26c9
--- /dev/null
+++ b/_pages/hu_HU/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. Az eszközöd kikapcsolt állapotában tartsd nyomva a következő gombokat: (Bal Váll) + (Jobb Váll) + (D-Pad Fel) + (A), majd ezen gombok nyomva tartása mellett kapcsold be az eszközöd
+ + Tartsd nyomva a gombokat, amíg a konzolod be nem bootol a rendszer frissítés képernyőre (ez a Safe Mode)
+1. Ha a rendszer frissítés képernyőt látod, nyomj Cancel-t
+ + Az eszközöd ki fog kapcsolni
+ + Ha az eszközöd a HOME menübe bootol, csak kapcsold ki az eszközöd
diff --git a/_pages/hu_HU/include/sysupdate.txt b/_pages/hu_HU/include/sysupdate.txt
new file mode 100644
index 0000000000..8c49a8a5d6
--- /dev/null
+++ b/_pages/hu_HU/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Frissítsd az eszközödet következőképp. Lépj be a System Settings-be, majd az "Other settings"-be, ahol addig lépkedj jobbra, amíg a végére nem érsz. Itt válaszd a "System Update" opciót.
+{%- if include.cfw == "true" %}
+ + B9S és Luma használatakor (mint esetedben) biztonságosak a rendszerfrissítések
+{%- endif %}
+ + A frissítő elképzelhető, hogy megjeleníti a "Your system is up to date" üzenetet a frissítés helyett. Ez normális, ha már frissítettél; folytasd a következő szakasszal
+ + Ha ez hibát ad, akkor állítsd a DNS és Proxy beállításodat egyaránt "Auto"-ra
+{%- if include.cfw == "true" %}
+ + Ha továbbra is hibát kapsz, [kövesd ezt a hibaelhárítási útmutatót](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/hu_HU/installing-boot9strap-(frogtool).txt b/_pages/hu_HU/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..b561ae3800
--- /dev/null
+++ b/_pages/hu_HU/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Tartalomjegyzék" %}
+
+{% capture technical_info %}
+Technikai részletek (opcionális)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### Amire szükséged lesz
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### I. rész - CHF ellenőrzés
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### II. rész - Előkészületek
+
+1. Kapcsold ki a készüléked
+1. Helyezd az SD kártyád a számítógépbe
+1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Tedd vissza az SD kártyád a készülékedbe
+1. Kapcsold be a készülékedet
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. Ha az exploit sikeres volt, a készülékednek ezt követően be kell töltenie a JPN verzióját a Flipnote Studio-nak
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### VI. rész - Luma3DS beállítás
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### VII. rész - A DS Connection Settings visszaállítása
+
+1. Indítsd el a Download Play alkalmazást
+1. Várj, amíg két gombot nem látsz
+ + Ne nyomd meg egyik gombot sem
+1. Nyomd le az (Bal Váll) + (D-Pad le) + (Select) gombokat egyszerre a Rosalina menü megnyitásához
+1. Válaszd ki a "Miscellaneous options"-t
+1. Válaszd a "Switch the hb. title to the current app." opciót
+1. Nyomd meg a (B) gombot a folytatáshoz
+1. Nyomd meg a (B) gombot, hogy visszakerülj a Rosalina főmenüjébe
+1. Nyomd meg a (B) gombot, hogy kilépj a Rosalina menüből
+1. Nyomd meg a (Home) gombot és zárd be a Download Play-t
+1. Indítsd el újra a Download Play alkalmazást
+1. A készülékednek ezek után be kell töltenie a Homebrew Launchert
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Kapcsold ki a készüléked
+
+___
+
+### Tovább a [telepítés véglegesítésére](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt b/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt
index 8e86101e3e..4801583ce3 100644
--- a/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ Ha a (Jobb/Bell Vál), (D-Pad Fel) vagy az (A) gombod nem működik, csatlakozz
Ebben a fejezetben a Homebrew Launcher-t fogod használni a slotTool indítására, ami felülírja a Wi-Fi slotjaidat a hackelt adattal. Utána át fogod másolni a fájlokat az eszközöd SD kártyájára, amik kiváltják az unSAFE_MODE exploit-ot. A Wi-Fi kapcsolat beállításaid átmenetileg felülírásra kerülnek, amíg az exploit aktív.
-1. A konzolodnak bekapcsoltnak kell lennie, és a Homebrew Launchert mutatnia az előző rész alapján
- + Ha nem, kapcsold be a konzolod és lépj be a Homebrew Launcher-be a választásod szerinti (jellemzően Pokémon Picross) módon
+1. Kapcsold be a készülékedet
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Indítsd el a slotTool-t a homebrew listából
+ Ha beragadsz a piros képernyőn, kapcsold ki erőltetve a konzolod a bekapcsoló gombjának 15 másodpercig nyomva tartásával, majd próbáld meg újra ezt a részt
1. Válaszd az "INSTALL exploit to wifi slots 1,2,3 & shutdown" opciót
@@ -56,7 +56,7 @@ Ebben a fejezetben a Homebrew Launcher-t fogod használni a slotTool indításá
#### II. szakasz - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### III. rész - boot9strap telepítése
diff --git a/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt b/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt
index c8a33113de..ceec79bdd6 100644
--- a/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ Ahhoz, hogy követhesd ezeket a lépéseket, a következőkre van szükséged:
- Egy fizikai vagy digitális példánya a Mario Kart 7-nek, aminek a régiója egyezik mindkét konzol régiójával
- Egy SD kártyára mindkét eszközhöz
-Ha a (Jobb/Bal Váll), (D-Pad Fel) vagy (A) gombjaid nem működnek a ** cél 3DS-en**, nem fogod tundi követni ezt az útmutatót. Ha további támogatásra van szükséged az anyaggal kapcsolatosan, csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és kérj, angolul, támogatást.
-{: .notice--warning}
-
### Amire szükséged lesz
A **forrás 3DS**-en (a 3DS egyedi firmware-rel):
* A [kartdlphax] legújabb kiadása (https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* A [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) legújabb kiadása (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
A **cél 3DS**-en (a 3DS, amit módosítani szeretnél):
@@ -47,7 +44,14 @@ A **cél 3DS**-en (a 3DS, amit módosítani szeretnél):
* A [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb standard kiadása (a Luma3DS `.zip` fájl)
* Az [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) legújabb kiadása (a RELEASE `.zip` fájl)
-#### I. rész - Előkészületi munka (forrás 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. Ebben az esetben csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és kérj, támogatást angolul.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
Ebben a fejezetben befogod állítani a forrás 3DS-ed (a 3DS egyedi firmware-rel), hogy küldje az exploit adatot a cél 3DS-nek.
@@ -61,7 +65,7 @@ Ebben a fejezetben befogod állítani a forrás 3DS-ed (a 3DS egyedi firmware-re
- Hozd létre a `plugins` és `00040000...` mappákat, ha nem léteznek
1. Távolítsd el az SD kártyát és rakd be a **forrás 3DS**-be
-#### II. rész - Előkészületi munka (cél 3DS)
+#### Section III - Prep Work (target 3DS)
Ebben a fejezetben fel fogod másolni azokat a fájlokat, amik ahhoz szükségesek, hogy kiváltsák az unSAFE_MODE exploit-ot a cél 3DS (a 3DS, amit módosítani szeretnél) SD kártyájára.
@@ -75,7 +79,7 @@ Ebben a fejezetben fel fogod másolni azokat a fájlokat, amik ahhoz szükséges
1. Másold át a `slotTool` mappát az unSAFE_MODE `.zip`-ből az SD kártya gyökerében található `3ds` mappába
1. Távolítsd el az SD kártyát és rakd be a **cél 3DS**-be
-#### III. rész - kartdlphax
+#### Section IV - kartdlphax
Ebben a fejelzetben a Download Play-t fogod használni, hogy átvidd az exploit adatot a forrás 3DS-ről a cél 3DS-re, ami arra használható, hogy felülírd a Wi-Fi slotjaid a hackelt adattal. A Wi-Fi kapcsolat beállításaid átmenetileg felülírásra kerülnek, amíg az exploit aktív.
@@ -111,18 +115,18 @@ Ebben a fejelzetben a Download Play-t fogod használni, hogy átvidd az exploit
**Nincs** szükséged a **forrás 3DS** használatára a további lépések végrehajtásához ebben az útmutatóban. Minden további lépést a **cél 3DS**-en kell végre hajtani.
{: .notice--info}
-#### IV. szakasz - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### V. rész - boot9strap telepítése
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### VI. rész - A WiFi Configuration Profiles visszaállítása
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/hu_HU/installing-boot9strap-(safecerthax).txt b/_pages/hu_HU/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..83c466d56c
--- /dev/null
+++ b/_pages/hu_HU/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Tartalomjegyzék" %}
+
+{% capture technical_info %}
+Technikai részletek (opcionális)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Kompatibilitási megjegyzések
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### Amire szükséged lesz
+
+* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) legfrisseb verziója (közvetlen letöltés)
+* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) legfrisseb verziója (közvetlen letöltés)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Lépések
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### II. rész - Előkészületek
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Helyezd az SD kártyád a számítógépbe
+1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe
+ + Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
+1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében
+1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `/boot9strap/` mappájába
+1. Másold át a `SafeB9SInstaller.bin` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe
+1. Tedd vissza az SD kártyád a készülékedbe
+1. Kapcsold be a készülékedet
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Kapcsold ki a készüléked
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. Az eszközöd kikapcsolt állapotában tartsd nyomva a következő gombokat: (Bal Váll) + (Jobb Váll) + (D-Pad Fel) + (A), majd ezen gombok nyomva tartása mellett kapcsold be az eszközöd
+ + Tartsd nyomva a gombokat, amíg az eszköz be nem bootol a Safe Mode-ba (a "system update" menübe)
+1. Nyomj "OK"-ot a frissítés elfogadásához
+ + Nincs frissítés. Ez része az exploitnak
+1. Nyomj az "I accept"-re a feltételek elfogadásához
+1. A frissítés sikertelen lesz a `003-1099` hibakóddal. Ez az elvárt viselkedés
+1. Press "OK" to close the error message
+1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### V. rész - boot9strap telepítése
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Tovább a [telepítés véglegesítésére](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt b/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt
index d301ecba89..082941503a 100644
--- a/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ Ebben a fejezetben fel fogod másolni a fájlokat, amik a browserhax és az univ
Ebben a fejezetben módosítani fogod az Internet kapcsolat beállításokat hogy egy proxy hálózatot használj, ami úgy lett megtervezve, hogy kikerülje a browser verzió ellenőrzést, lehetővé téve a browser műlödését rendszer frissítés nélkül. Ez lehetővé teszi, hogy hozzáférj a browser exploit weboldalhoz a következő fejezetben.
-Ha még nenm történt meg, biztosítsd, hogy legyen működő Internet kapcsolata a konzolodnak.
-{: .notice--info}
-
-1. Indítsd el a System Settings alkalmazást
-1. Navigálj az `Internet Settings` -> `Connection Settings` opciókhoz
-1. Kattints a saját hálózati kapcsolatodra és navigálj a `Change Settings` -> `Next Page (jobb nyíl)` -> `Proxy Settings` opcióhoz
-1. Állítsd az "Proxy Settings"-t "Yes"-re majd kattints a `Detailed Setup`-ra
-1. Állítsd be a Proxy Server-t `192.9.234.11`-re, és a Port-ot `8080`-ra
-1. Kattints az OK-ra, majd kattints a Save-re
-1. Amikor kérdezi, kattints a "Test"-re a kapcsolat ellenőrzéséhez
- + A tesztnek sikeresnek kell lennie
-1. Kattintson az OK gombra a folytatáshoz
+{% include_relative include/addproxy.txt %}
1. Nyomj a "Back"-re kétszer, majd a "Close"-ra, hogy visszajuszz a HOME Menübe
#### III. rész - A SafeB9SInstaller indítása
Ebben a fejezetben meg fogod látogatni a browser exploit weboldalt, ami az universal-otherapp-ot fogja használni a boot9strap (egyedi firmware) telepítő indításához.
-1. A HOME menüben nyomd meg a bal és jobb váll gombokat egyszerre, hogy megnyisd a kamerát
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ Ha nem tudod megnyitni a kamerát, nyisd meg az Internet Browser-t kézzel, és írd be az URL-t e helyett. (`https://zoogie.github.io/web/nbhax/`)
1. Érintsd meg a QR Code gombot és olvasd le [ezt a QR kódot](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ Ha hibát kapsz, [nézd át ezt a hibaelhárítási útmutatót](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ Ebben a fejezetben meg fogod látogatni a browser exploit weboldalt, ami az univ
#### V. rész - A Proxy beállítás alaphelyzetbe állítása
-Ebben a fejezetben vissza fogod állítani az internet beállításokat a normálisra.
-
-1. Indítsd el a System Settings alkalmazást
-1. Navigálj az `Internet Settings` -> `Connection Settings` opciókhoz
-1. Kattints a saját hálózati kapcsolatodra és navigálj a `Change Settings` -> `Next Page (jobb nyíl)` -> `Proxy Settings` opcióhoz
-1. Állítsd a "Proxy Settings"-t "No"-ra
-1. Kattints az OK-ra, majd kattints a Save-re
-1. Amikor kérdezi, kattints a "Test"-re a kapcsolat ellenőrzéséhez
- + A tesztnek sikeresnek kell lennie
-1. Kapcsold ki a készüléked
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/hu_HU/installing-boot9strap-(usm).txt b/_pages/hu_HU/installing-boot9strap-(usm).txt
index e14f4a2092..a6277be2f3 100644
--- a/_pages/hu_HU/installing-boot9strap-(usm).txt
+++ b/_pages/hu_HU/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ Ebben a fejezetben elő fogod idézni a BannerBomb3 exploit-ot a DSIWare Managem
#### III. rész - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### IV. rész - boot9strap telepítése
diff --git a/_pages/hu_HU/region-changing.txt b/_pages/hu_HU/region-changing.txt
index 3a05bee60f..5d6163fdf8 100644
--- a/_pages/hu_HU/region-changing.txt
+++ b/_pages/hu_HU/region-changing.txt
@@ -6,11 +6,15 @@ title: "Régióváltás"
### Fontos tudnivalók
-Ez egy kiegészítő rész, amelyben régióváltást végzünk a CFW SysNAND-on. Ezt úgy hajtjuk végre, hogy telepítünk egy olyan 11.15.0-s CTRTransfer képfájlt, ami az általad kívánt régiójú. A képfájl telepítését követően frissítheted az eszközödet a szokásos módon a legutolsó firmware-re (11.16.0).
+This is an add-on section for region changing your device. Ezt úgy hajtjuk végre, hogy telepítünk egy olyan 11.15.0-s CTRTransfer képfájlt, ami az általad kívánt régiójú. A képfájl telepítését követően frissítheted az eszközödet a szokásos módon a legutolsó firmware-re (11.16.0).
-Fontos, hogy tudd, hogy a régióváltás majdnem teljesen felesleges, mivel a Luma3DS támogatja a régiódon kívüli játékokat, illetve a játékonkénti [lokalizáció emulációt](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features) is. Ezen felül, NDS játékok futtatása más, régión kívüli nyelveken is támogatott [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases) segítségével.
+Fontos, hogy tudd, hogy a régióváltás majdnem teljesen felesleges, mivel a Luma3DS támogatja a régiódon kívüli játékokat, illetve a játékonkénti [lokalizáció emulációt](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features) is. Ezen felül, NDS játékok futtatása más, régión kívüli nyelveken is támogatott [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases) segítségével. You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Vedd figyelembe, hogy amennyiben van más payload fájl a `GodMode9.firm` fájlon kívül a `/luma/payloads/`mappában, indításkor a (Start) gombot lenyomva tartva a "chainloader menu" menü fog megjelenni. Itt a D-Pad és az (A) gomb segítségével válaszd a "GodMode9" opciót, hogy az alábbi utasításokat követhesd.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
Ha módosítod a régióját az eszközödnek:
@@ -18,20 +22,16 @@ Ha módosítod a régióját az eszközödnek:
+ Nem fogod tudni használni az NNID azonosítód (ha van ilyened). Az NNID-k ahhoz a régióhoz kötöttek, ahol létre lettek hozva.
+ Elképzelhető, hogy nem fogod elérni az eShop-ot, még akkor sem ha [törlöd az eShop fiókod](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) előtte. Ez azért van, mert néhány cím linkelt marad a 3DS-hez, még akkor is ha a fiók törlésre kerül (különösen New 3DS-en).
+ Habár az eShop-ban már nem lehet vásárolni, a játék frissítések továbbra is letölthetők. A frissítések többnyire szükségesek az online játékhoz.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **Nem fogod tudni eltávolítani az egyedi firmware-t az eszköz brickelése nélkül!** Ha szeretnéd eltávolítanp az egyedi firmware-t a jövőben, vissza **KELL** állítanod a NAND mentésed, amit a régió módosítás előtt készítettél.
{% endcapture %}
{{ notice-6 | markdownify }}
-Az alábbiak használatához már telepítened kellett a következőket: Luma3DS és boot9strap.
-{: .notice--danger}
-
-Egy régió váltás végrehajtása tönkre teheti a bővített memória módú játékokat (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) régi 3DS/2DS eszközökön. Ha ez előfordulna, formáznod kell az eszközödet (a TinyFormat vagy a System Settings használatával) a javításhoz.
-{: .notice--warning}
-
### Amire szükséged lesz
-Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) linkeket ezen az oldalon, szükséged lesz egy torrent kliensre, mint például a [qBittorrent](https://www.qbittorrent.org/download.php) vagy a [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* A [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) legújabb kiadása (a GodMode9 `.zip` fájl)
@@ -72,15 +72,11 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### VI. rész - Régió beállítások
+#### Section VI - Deleting system save data
-1. Indítsd el a System Settings-et
-1. Válaszd az "Other Settings", majd a "Profile", végül a "Region Settings" opciót
-1. Válassz egy olyan országot, ami abba a régióba tartozik, amibe váltottál
-1. Nem szükséges államot beállítanod, ha kérdezné
-
-#### VII. rész - CTRTransfer képfájl eltávolítása
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/hu_HU/site-navigation.txt b/_pages/hu_HU/site-navigation.txt
index 7e9c980502..5972bfb913 100644
--- a/_pages/hu_HU/site-navigation.txt
+++ b/_pages/hu_HU/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [CFW ellenőrzése](checking-for-cfw)
+ [Közreműködés](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Címek és Játék Cartridge-ek dumpolása](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 használata](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Főoldal](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Boot9strap telepítése (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Boot9strap telepítése (Hardmod)](installing-boot9strap-(hardmod))
+ [Boot9strap telepítése (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Boot9strap telepítése (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Boot9strap telepítése (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Boot9strap telepítése (Soundhax)](installing-boot9strap-(soundhax))
+ [Boot9strap telepítése (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Boot9strap telepítése (USM)](installing-boot9strap-(usm))
diff --git a/_pages/hu_HU/troubleshooting.txt b/_pages/hu_HU/troubleshooting.txt
index fa5d381b8b..8f5a283f3a 100644
--- a/_pages/hu_HU/troubleshooting.txt
+++ b/_pages/hu_HU/troubleshooting.txt
@@ -17,6 +17,7 @@ Több oldalon használt:
* [Boot9strap telepítése (Fredtool)](#installing-boot9strap-fredtool)
* [Boot9strap telepítése (Soundhax)](#installing-boot9strap-soundhax)
* [Boot9strap telepítése (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Telepítés véglegesítése](#finalizing-setup)
@@ -420,6 +421,31 @@ Ha ez sikertelen, próbálkozz egy másik SD kártyával.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+Ez valószínűleg azt jelzi, hogy már van egyedi firmware-ed. Érdemes elvégezned a [CFW ellenőrzését](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Telepítés véglegesítése
diff --git a/_pages/id_ID/bannerbomb3.txt b/_pages/id_ID/bannerbomb3.txt
index 5a11fffeff..0bf8e2d4a0 100644
--- a/_pages/id_ID/bannerbomb3.txt
+++ b/_pages/id_ID/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/id_ID/ctrtransfer.txt b/_pages/id_ID/ctrtransfer.txt
index 7d28b44618..b4ddf12625 100644
--- a/_pages/id_ID/ctrtransfer.txt
+++ b/_pages/id_ID/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/id_ID/dumping-movable-(nimhax).txt b/_pages/id_ID/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..1621a85165
--- /dev/null
+++ b/_pages/id_ID/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/id_ID/finalizing-setup.txt b/_pages/id_ID/finalizing-setup.txt
index 99a2426cc8..5e4e918277 100644
--- a/_pages/id_ID/finalizing-setup.txt
+++ b/_pages/id_ID/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/id_ID/get-started.txt b/_pages/id_ID/get-started.txt
index 6b86afa5d6..fd65fe67fa 100644
--- a/_pages/id_ID/get-started.txt
+++ b/_pages/id_ID/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/id_ID/homebrew-launcher-(super-skaterhax).txt b/_pages/id_ID/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..6f4daef090
--- /dev/null
+++ b/_pages/id_ID/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/id_ID/include/addproxy.txt b/_pages/id_ID/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/id_ID/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/id_ID/include/ctrnand-datayeet.txt b/_pages/id_ID/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..6749b1d1bc
--- /dev/null
+++ b/_pages/id_ID/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/id_ID/include/exploit-usm.txt b/_pages/id_ID/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/id_ID/include/exploit-usm.txt
+++ b/_pages/id_ID/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/id_ID/include/rmproxy.txt b/_pages/id_ID/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/id_ID/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/id_ID/include/safemodecheck.txt b/_pages/id_ID/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/id_ID/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/id_ID/include/sysupdate.txt b/_pages/id_ID/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/id_ID/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/id_ID/installing-boot9strap-(frogtool).txt b/_pages/id_ID/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ddfc6a7304
--- /dev/null
+++ b/_pages/id_ID/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/id_ID/installing-boot9strap-(hbl-usm).txt b/_pages/id_ID/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/id_ID/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/id_ID/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/id_ID/installing-boot9strap-(safecerthax).txt b/_pages/id_ID/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..075e190486
--- /dev/null
+++ b/_pages/id_ID/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt b/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt
index bfd7771226..e5beafbea0 100644
--- a/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/id_ID/installing-boot9strap-(usm).txt b/_pages/id_ID/installing-boot9strap-(usm).txt
index 6f9a1eb70c..4e326ff6d3 100644
--- a/_pages/id_ID/installing-boot9strap-(usm).txt
+++ b/_pages/id_ID/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/id_ID/region-changing.txt b/_pages/id_ID/region-changing.txt
index 9af30fe4b5..413fdb3c10 100644
--- a/_pages/id_ID/region-changing.txt
+++ b/_pages/id_ID/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/id_ID/site-navigation.txt b/_pages/id_ID/site-navigation.txt
index 40ef6b75b6..a2135747ab 100644
--- a/_pages/id_ID/site-navigation.txt
+++ b/_pages/id_ID/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/id_ID/troubleshooting.txt b/_pages/id_ID/troubleshooting.txt
index c8f2789ae4..4f46f113bb 100644
--- a/_pages/id_ID/troubleshooting.txt
+++ b/_pages/id_ID/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/it_IT/bannerbomb3.txt b/_pages/it_IT/bannerbomb3.txt
index 1304226315..344e94a3f3 100644
--- a/_pages/it_IT/bannerbomb3.txt
+++ b/_pages/it_IT/bannerbomb3.txt
@@ -26,7 +26,7 @@ Se hai una console taiwanese (indicata da una T dopo la versione di sistema), se
### Cosa serve
-* Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Sezione I - Preparazione
@@ -58,11 +58,7 @@ In questa sezione, copierai i file necessari per attivare l'exploit BannerBomb3
In questa sezione controllerai se la tua console può accedere alla Modalità Provvisoria. Serve per determinare quale metodo seguirai nella prossima pagina.
-1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché, tenendo premuti i pulsanti, accendi la console
- + Tieni premuti i pulsanti finché la console non mostrerà una schermata di aggiornamento dei sistema (cioè la Modalità Provvisoria)
-1. Se viene mostrata la schermata di aggiornamento del sistema, premi Annulla
- + La console si spegnerà
- + Se la console si avvia nel menu HOME, spegni la console
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/it_IT/ctrtransfer.txt b/_pages/it_IT/ctrtransfer.txt
index efa0ee665e..6d85eff563 100644
--- a/_pages/it_IT/ctrtransfer.txt
+++ b/_pages/it_IT/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
In questa sezione aggiuntiva verrà spiegato come installare un'immagine CTRTransfer 11.15.0 sulla tua console.
-Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella cartella `/luma/payloads/` della tua scheda SD, per seguire le istruzioni riportate dovrai avviare la console tenendo (Start); apparirà un "menu chainloader" dove dovrai selezionare "GodMode9" tramite il D-Pad e il pulsante (A).
+Questa pagina presuppone che tu abbia già installato Luma3DS e boot9strap. Se hai seguito questo sito web fino alla fine (Completamento dell'installazione), hai Luma3DS e boot9strap.
+{: .notice--info}
-DEVI aver già installato Luma3DS e boot9strap per poter proseguire.
-{: .notice--danger}
-
-Un CTRTransfer potrebbe rendere inutilizzabili i giochi in modalità memoria estesa (Monster Hunter, Super Smash Bros, Pokemon Sole/Lune) su console Old 3DS/2DS. Se dovesse accadere, sarà necessario formattare la console (tramite TinyFormat o Impostazioni della console) per risolvere il problema.
+Come parte di questo processo, la configurazione di sistema verrà ripristinata ai valori predefiniti. Questo include dati come il tuo nome utente, il paese e la lingua. I giochi installati e i loro dati di salvataggio non verranno toccati.
{: .notice--warning}
### Cosa serve
-Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [qBittorrent](https://www.qbittorrent.org/download.php) o [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+Per scaricare le immagini CTRTransfer di questa pagina avrai bisogno di un client torrent come [qBittorrent](https://www.qbittorrent.org/download.php) o [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (il file `.zip` di GodMode9)
@@ -55,9 +53,9 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Sezione V - Rimozione del file immagine del CTRTransfer
+#### Sezione VI - Cancellare i dati di salvataggio del sistema
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/it_IT/dumping-movable-(nimhax).txt b/_pages/it_IT/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..de8a49cb9f
--- /dev/null
+++ b/_pages/it_IT/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Indice" %}
+
+{% capture technical_info %}
+Dettagli Tecnici (opzionale)
+
+Per installare boot9strap nella tua console, ne ricaviamo la sua univoca chiave di cifratura. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Cosa serve
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Istruzioni
+
+#### Sezione I - Preparazione
+
+1. Spegni il tuo 3DS
+1. Inserisci la scheda SD nel tuo computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinserisci la scheda SD nella tua console
+1. Accendi la console
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Prosegui con [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt
index 8789e84921..78b9c92c94 100644
--- a/_pages/it_IT/finalizing-setup.txt
+++ b/_pages/it_IT/finalizing-setup.txt
@@ -31,7 +31,7 @@ Se la tua precedente installazione CFW era basata su EmuNAND e desideri spostare
### Cosa serve
* L'ultima versione di [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* La versione v3.7.4 di [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* L'ultima versione di [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (il file `.cia`)
* L'ultima versione di [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (il file `.cia`)
* L'ultima versione di [FBI](https://github.com/Steveice10/FBI/releases/latest) (**entrambi** i file `.cia` e `.3dsx`)
@@ -70,11 +70,7 @@ I successivi screenshot indicano la struttura minima che la scheda SD deve avere
In questa sezione, aggiornerai il tuo sistema all'ultima versione, tranquillamente fattibile con il custom firmware.
-1. Aggiorna la console andando su Impostazioni della console, poi "Impostazioni generali", infine scorri a destra e seleziona "Aggiornamento"
- + Gli aggiornamenti effettuati usando B9S + Luma (ora installato) sono sicuri
- + Potrebbe apparire il messaggio "Nella console è già presente il software di sistema più recente". È normale se hai già installato l'ultima versione; prosegui con la sezione successiva
- + Se ottieni un errore, imposta sia i DNS sia il Proxy su "auto"
- + Se l'errore continua a presentarsi, [segui questa guida per risolvere il problema](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Sezione III - Homebrew Launcher
diff --git a/_pages/it_IT/get-started.txt b/_pages/it_IT/get-started.txt
index 18721da95a..87997bf9a0 100644
--- a/_pages/it_IT/get-started.txt
+++ b/_pages/it_IT/get-started.txt
@@ -25,6 +25,10 @@ Se vedi un menu insolito, FERMATI - hai già un custom firmware! Prosegui da [qu
Per trovare il metodo corretto per la tua console, inserisci la versione di sistema che hai trovato nella Sezione II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
Questa non sembra essere una versione di sistema valida.
{% endcapture %}
@@ -33,7 +37,7 @@ Questa non sembra essere una versione di sistema valida.
Al momento non è possibile modificare il tuo 3DS con questa versione utilizzando i metodi principali. Se vuoi modificare la tua console, dovrai usare ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Metodi Alternativi
diff --git a/_pages/it_IT/homebrew-launcher-(super-skaterhax).txt b/_pages/it_IT/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..90bfcae52a
--- /dev/null
+++ b/_pages/it_IT/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Indice" %}
+
+{% capture technical_info %}
+Dettagli Tecnici (opzionale)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Note di Compatibilità
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### Cosa serve
+
+* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (il file `.zip` di Luma3DS)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Sezione II - Preparazione
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Spegni il tuo 3DS
+1. Inserisci la scheda SD nel tuo computer
+1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD
+ + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinserisci la scheda SD nella tua console
+1. Accendi la console
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + Se visualizzi un avviso riguardo un certificato di sicurezza, premi (A) per consentire la connessione
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Premi il pulsante (A) per continuare
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Spegni il tuo 3DS
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+Se nella sezione precedente hai visto la schermata di aggiornamento del sistema, la Modalità Provvisoria è funzionante sulla tua console.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/it_IT/include/addproxy.txt b/_pages/it_IT/include/addproxy.txt
new file mode 100644
index 0000000000..e2a8b62d57
--- /dev/null
+++ b/_pages/it_IT/include/addproxy.txt
@@ -0,0 +1,12 @@
+Se non l'hai già fatto, assicurati di avere una connessione Internet funzionante configurata sulla tua console.
+{: .notice--info}
+
+1. Avvia l'applicazione Impostazioni della console
+1. Entra in `Impostazioni Internet` -> `Impostazioni di collegamento`
+1. Clicca sulla tua connessione wifi e naviga su `Modifica` -> `Pagina Successiva (la freccia a destra)` -> `Impostazioni proxy`
+1. Imposta "Impostazioni proxy" su "Sì", quindi clicca su `Impostazioni avanzate`
+1. Imposta il Server proxy su `192.9.234.11`, e la Porta su `8080`
+1. Fai clic su OK, quindi su Salva
+1. Quando richiesto, clicca su "Test" per eseguire il test di connessione
+ + Il test dovrebbe andare a buon fine
+1. Clicca "OK" per continuare
diff --git a/_pages/it_IT/include/ctrnand-datayeet.txt b/_pages/it_IT/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..36b4011a38
--- /dev/null
+++ b/_pages/it_IT/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Spegni il tuo 3DS
+1. Premi (Start) e accendi la console continuando a tenerlo premuto. Verrà avviato GodMode9
+1. Entra nella cartella `[0:] SDCARD` -> `gm9`
+1. Premi (X) sul file immagine `.bin` del CTRTransfer per cancellarlo
+1. Premi (A) per confermare
+1. Premi (B) alcune volte per tornare al menu principale
+1. Entra nella cartella `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + `` sarà una cartella con un nome casuale di 32 caratteri. Potresti riconoscerlo da Seedminer, se hai utilizzato quel metodo
+1. Naviga su `00010017` con il D-Pad
+1. Premi (R) + (A) per visualizzare le opzioni della cartella
+1. Seleziona "Copy to 0:/gm9/out"
+1. Premi il pulsante (A) per continuare
+1. Sempre rimanendo su `00010017`, premi (X) per eliminarla
+1. Premi (A) per confermare
+1. Premi il pulsante (A) per sbloccare i permessi di scrittura di secondo livello su SysNAND, quindi inserisci la combinazione di tasti richiesta a schermo
+1. Al termine della rimozione del file, premi (A) per proseguire
+1. Se richiesto, premi (A) per ritirare le autorizzazioni di scrittura
+1. Premi (Start) per riavviare la console
+1. La tua console avvierà il menu di configurazione iniziale
+ + È voluto. Non hai perso alcun dato di gioco
+1. Completa la configurazione iniziale seguendo le istruzioni mostrate a schermo
diff --git a/_pages/it_IT/include/exploit-usm.txt b/_pages/it_IT/include/exploit-usm.txt
index c4793cc3ef..d91a92997e 100644
--- a/_pages/it_IT/include/exploit-usm.txt
+++ b/_pages/it_IT/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In questa sezione avvierai la Modalità Provvisoria (una funzionalità disponibi
1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché, tenendo premuti i pulsanti, accendi la console
+ Mantieni premuti i pulsanti finché la console non si avvia in Safe Mode (una specie di menu per aggiornare il sistema)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + Se dopo molteplici tentativi non riesci ancora ad entrare in Safe Mode, potresti avere uno dei pulsanti difettosi o rotti. In tal caso, puoi ricevere assistenza chiedendo, in inglese, nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp).
-{%- elsif include.method == "bb3" %}
- + Se dopo molteplici tentativi non riesci ancora ad entrare in Safe Mode, potresti avere uno dei pulsanti difettosi o rotti. In questo caso, dovrai seguire [una versione alternativa di BannerBomb3](installing-boot9strap-(fredtool)). In questi casi, puoi ricevere assistenza chiedendo, in inglese, nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp).
-{%- endif %}
1. Premi "OK" per accettare l'aggiornamento
+ Non c'è alcun aggiornamento. Fa parte del procedimento
1. Premi "Accetto" per accettare i termini e le condizioni
@@ -14,3 +9,5 @@ In questa sezione avvierai la Modalità Provvisoria (una funzionalità disponibi
1. Alla richiesta "Vuoi configurare le Impostazioni internet?", seleziona "Sì"
1. Nel menu successivo, entra in `Connessione 1` -> `Modifica` -> pagina successiva (la freccia a destra) -> `Impostazioni proxy` -> `Impostazioni avanzate` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. Se l'exploit è andato a buon fine, la tua console avvierà SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/it_IT/include/rmproxy.txt b/_pages/it_IT/include/rmproxy.txt
new file mode 100644
index 0000000000..4fa1d11667
--- /dev/null
+++ b/_pages/it_IT/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In questa sezione ripristinerai le impostazioni di Internet alla normalità.
+
+1. Avvia l'applicazione Impostazioni della console
+1. Entra in `Impostazioni Internet` -> `Impostazioni di collegamento`
+1. Clicca sulla tua connessione wifi e naviga su `Modifica` -> `Pagina Successiva (la freccia a destra)` -> `Impostazioni proxy`
+1. Imposta "Impostazioni proxy" su "No"
+1. Fai clic su OK, quindi su Salva
+1. Quando richiesto, clicca su "Test" per eseguire il test di connessione
+ + Il test dovrebbe andare a buon fine
+1. Spegni il tuo 3DS
diff --git a/_pages/it_IT/include/safemodecheck.txt b/_pages/it_IT/include/safemodecheck.txt
new file mode 100644
index 0000000000..6546bc9f4a
--- /dev/null
+++ b/_pages/it_IT/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché, tenendo premuti i pulsanti, accendi la console
+ + Tieni premuti i pulsanti finché la console non mostrerà una schermata di aggiornamento dei sistema (cioè la Modalità Provvisoria)
+1. Se viene mostrata la schermata di aggiornamento del sistema, premi Annulla
+ + La console si spegnerà
+ + Se la console si avvia nel menu HOME, spegni la console
diff --git a/_pages/it_IT/include/sysupdate.txt b/_pages/it_IT/include/sysupdate.txt
new file mode 100644
index 0000000000..7f5c58e9af
--- /dev/null
+++ b/_pages/it_IT/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Aggiorna la console andando su Impostazioni della console, poi "Impostazioni generali", infine scorri a destra e seleziona "Aggiornamento"
+{%- if include.cfw == "true" %}
+ + Gli aggiornamenti effettuati usando B9S + Luma (ora installato) sono sicuri
+{%- endif %}
+ + Potrebbe apparire il messaggio "Nella console è già presente il software di sistema più recente". È normale se hai già installato l'ultima versione; prosegui con la sezione successiva
+ + Se ottieni un errore, imposta sia i DNS sia il Proxy su "Auto"
+{%- if include.cfw == "true" %}
+ + Se l'errore continua a presentarsi, [segui questa guida per risolvere il problema](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/it_IT/installing-boot9strap-(frogtool).txt b/_pages/it_IT/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..85bfcb0a48
--- /dev/null
+++ b/_pages/it_IT/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Indice" %}
+
+{% capture technical_info %}
+Dettagli Tecnici (opzionale)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### Cosa serve
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Sezione I - Controllo del CFW
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Sezione II - Preparazione
+
+1. Spegni il tuo 3DS
+1. Inserisci la scheda SD nel tuo computer
+1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinserisci la scheda SD nella tua console
+1. Accendi la console
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. Se l'exploit ha avuto successo, la tua console avrà caricato la versione JPN di Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Sezione VI - Configurazione di Luma3DS
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Sezione VII - Ripristino delle Impostazioni di Connessione DS
+
+1. Avvia l'applicazione "Modalità download"
+1. Attendi finché non vedrai i due pulsanti
+ + Non premere alcun pulsante
+1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina
+1. Seleziona "Miscellaneous options"
+1. Seleziona "Switch the hb. title to the current app."
+1. Premi (B) per continuare
+1. Premi (B) per tornare al menu principale di Rosalina
+1. Premi (B) per uscire dal menu di Rosalina
+1. Premi il pulsante HOME, quindi chiudi l'applicazione "Modalità download"
+1. Riavvia l'applicazione "Modalità download"
+1. La console dovrebbe ora avviare l'Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Spegni il tuo 3DS
+
+___
+
+### Prosegui con il [Completamento dell'installazione](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/it_IT/installing-boot9strap-(hbl-usm).txt b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt
index 34fc99ccbc..971d88caa5 100644
--- a/_pages/it_IT/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, unisciti a [Nintendo Homebr
In questa sezione userai Homebrew Launcher per avviare slotTool, che sovrascriverà le tue impostazioni Wi-Fi con dati modificati. Poi copierai i file necessari per attivare l'exploit unSAFE_MODE nella scheda SD della tua console. Le tue impostazioni Wi-Fi rimarranno temporaneamente sovrascritte finché l'exploit sarà attivo.
-1. Dalla sezione precedente della guida, la console dovrebbe essere già accesa e visualizzare la schermata dell'Homebrew Launcher
- + Altrimenti, accendi la tua console e avvia l'Homebrew Launcher tramite un metodo a scelta (di solito Pokémon Picross)
+1. Accendi la console
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Avvia slotTool dalla lista degli homebrew disponibili
+ Se rimani bloccato su una schermata rossa, spegni forzatamente la console tenendo premuto il pulsante di accensione per quindici secondi, quindi ritenta questa sezione
1. Seleziona l'opzione "INSTALL exploit to wifi slots 1,2,3 & shutdown"
@@ -56,7 +56,7 @@ In questa sezione userai Homebrew Launcher per avviare slotTool, che sovrascrive
#### Sezione II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Sezione III - Installazione di boot9strap
diff --git a/_pages/it_IT/installing-boot9strap-(kartdlphax).txt b/_pages/it_IT/installing-boot9strap-(kartdlphax).txt
index 98c3c3f448..b3208b3392 100644
--- a/_pages/it_IT/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/it_IT/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ Per seguire queste istruzioni, avrai bisogno di:
- Una copia fisica o digitale di Mario Kart della stessa regione di entrambe le console
- Una scheda SD per entrambe le console
-Se i pulsanti (L/R), (Su) o (A) sul **3DS di destinazione** non funzionano, non sarai in grado di seguire queste istruzioni. In questi casi, puoi ricevere assistenza chiedendo, in inglese, nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp).
-{: .notice--warning}
-
### Cosa serve
Sul **3DS di partenza** (il 3DS con custom firmware):
* L'ultima versione di [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* L'ultima versione di [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
Sul **3DS di destinazione** (il 3DS che stai cercando di modificare):
@@ -47,7 +44,14 @@ Sul **3DS di destinazione** (il 3DS che stai cercando di modificare):
* L'ultima versione di [Luma3DS standard](https://github.com/LumaTeam/Luma3DS/releases/latest) (il file `.zip` di Luma3DS)
* L'ultima versione di [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (il file RELEASE `.zip`)
-#### Sezione I - Preparazione (3DS di partenza)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. In tal caso, puoi ricevere assistenza chiedendo, in inglese, nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp).
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In questa sezione configurerai il tuo 3DS di partenza (il 3DS con custom firmware) per inviare i dati dell'exploit verso il 3DS di destinazione.
@@ -61,7 +65,7 @@ In questa sezione configurerai il tuo 3DS di partenza (il 3DS con custom firmwar
- Crea le cartelle `plugins` e `00040000...` se non sono già esistenti
1. Rimuovi la scheda SD e inseriscila nel **3DS di partenza**
-#### Sezione II - Preparazione (3DS di destinazione)
+#### Section III - Prep Work (target 3DS)
In questa sezione copierai i file necessari per attivare l'exploit unSAFE_MODE sulla scheda SD del 3DS di destinazione (il 3DS che stai cercando di modificare).
@@ -75,7 +79,7 @@ In questa sezione copierai i file necessari per attivare l'exploit unSAFE_MODE s
1. Copia la cartella `slotTool` dall'archivio `.zip` di unSAFE_MODE nella cartella `3ds` della tua scheda SD
1. Rimuovi la scheda SD e inseriscila nel **3DS di destinazione**
-#### Sezione III - kartdlphax
+#### Section IV - kartdlphax
In questa sezione utilizzerai la "Modalità download" per trasferire i dati dell'exploit dal 3DS di partenza al 3DS di destinazione, per sovrascrivere i tuoi profili di connessione Wi-Fi con dati modificati. Le tue impostazioni Wi-Fi rimarranno temporaneamente sovrascritte finché l'exploit sarà attivo.
@@ -111,18 +115,18 @@ In questa sezione utilizzerai la "Modalità download" per trasferire i dati dell
**Non** dovrai più usare il tuo **3DS di partenza** per completare qualsiasi ulteriore passo in questa guida. Eventuali ulteriori istruzioni devono essere completate solo sul **3DS di destinazione**.
{: .notice--info}
-#### Sezione IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Sezione V - Installazione di boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Sezione VI - Ripristino dei Profili di Connessione WiFi
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/it_IT/installing-boot9strap-(safecerthax).txt b/_pages/it_IT/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..ff74cd9dac
--- /dev/null
+++ b/_pages/it_IT/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Indice" %}
+
+{% capture technical_info %}
+Dettagli Tecnici (opzionale)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Note di Compatibilità
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### Cosa serve
+
+* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (download diretto)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (download diretto)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Istruzioni
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Sezione II - Preparazione
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Inserisci la scheda SD nel tuo computer
+1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD
+ + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD
+1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD
+1. Copia il file `SafeB9SInstaller.bin` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD
+1. Reinserisci la scheda SD nella tua console
+1. Accendi la console
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Spegni il tuo 3DS
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché, tenendo premuti i pulsanti, accendi la console
+ + Mantieni premuti i pulsanti finché la console non si avvia in Safe Mode (una specie di menu per aggiornare il sistema)
+1. Premi "OK" per accettare l'aggiornamento
+ + Non c'è alcun aggiornamento. Fa parte del procedimento
+1. Premi "Accetto" per accettare i termini e le condizioni
+1. L'aggiornamento fallirà, con codice di errore `003-1099`. Questo risultato è corretto
+1. Press "OK" to close the error message
+1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Sezione V - Installazione di boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Prosegui con il [Completamento dell'installazione](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt b/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt
index 17410becf8..b8a346677d 100644
--- a/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In questa sezione copierai i file necessari per attivare sia browserhax che univ
In questa sezione cambierai le impostazioni di collegamento ad Internet per utilizzare una rete proxy progettata per aggirare il controllo della versione del browser, permettendo al browser di funzionare senza un aggiornamento di sistema. Questo ti permetterà di accedere alla pagina web dell'exploit del browser nella prossima sezione.
-Se non l'hai già fatto, assicurati di avere una connessione Internet funzionante configurata sulla tua console.
-{: .notice--info}
-
-1. Avvia l'applicazione Impostazioni della console
-1. Entra in `Impostazioni Internet` -> `Impostazioni di collegamento`
-1. Clicca sulla tua connessione wifi e naviga su `Modifica` -> `Pagina Successiva (la freccia a destra)` -> `Impostazioni proxy`
-1. Imposta "Impostazioni proxy" su "Sì", quindi clicca su `Impostazioni avanzate`
-1. Imposta il Server proxy su `192.9.234.11`, e la Porta su `8080`
-1. Fai clic su OK, quindi su Salva
-1. Quando richiesto, clicca su "Test" per eseguire il test di connessione
- + Il test dovrebbe andare a buon fine
-1. Clicca "OK" per continuare
+{% include_relative include/addproxy.txt %}
1. Premi "Indietro" due volte, poi "Chiudi" per tornare al menu HOME
#### Sezione III - Avvio di SafeB9SInstaller
In questa sezione visiterai la pagina web dell'exploit del browser, che userà universal-otherapp per avviare il programma di installazione di boot9strap (custom firmware).
-1. Nel menu HOME, premi i pulsanti dorsali L e R per avviare la fotocamera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ Se non riesci ad avviare la fotocamera, avvia il Browser Internet e raggiungi manualmente l'URL (`https://zoogie.github.io/web/nbhax/`)
1. Tocca il pulsante Codice QR e scansiona [questo codice QR](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ Se ottieni un errore, [segui questa guida per risolvere il problema](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In questa sezione visiterai la pagina web dell'exploit del browser, che userà u
#### Sezione V - Ripristino proxy di default
-In questa sezione ripristinerai le impostazioni di Internet alla normalità.
-
-1. Avvia l'applicazione Impostazioni della console
-1. Entra in `Impostazioni Internet` -> `Impostazioni di collegamento`
-1. Clicca sulla tua connessione wifi e naviga su `Modifica` -> `Pagina Successiva (la freccia a destra)` -> `Impostazioni proxy`
-1. Imposta "Impostazioni proxy" su "No"
-1. Fai clic su OK, quindi su Salva
-1. Quando richiesto, clicca su "Test" per eseguire il test di connessione
- + Il test dovrebbe andare a buon fine
-1. Spegni il tuo 3DS
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/it_IT/installing-boot9strap-(usm).txt b/_pages/it_IT/installing-boot9strap-(usm).txt
index 8dc6b3acd4..127e1d7635 100644
--- a/_pages/it_IT/installing-boot9strap-(usm).txt
+++ b/_pages/it_IT/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In questa sezione attiverai l'exploit BannerBomb3 utilizzando il menu Gestione N
#### Sezione III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Sezione IV - Installazione di boot9strap
diff --git a/_pages/it_IT/region-changing.txt b/_pages/it_IT/region-changing.txt
index 122aae64cc..4348b60432 100644
--- a/_pages/it_IT/region-changing.txt
+++ b/_pages/it_IT/region-changing.txt
@@ -6,11 +6,15 @@ title: "Cambiare regione"
### Lettura necessaria
-In questa sezione aggiuntiva verrà spiegato come cambiare regionalità su SysNAND con CFW. Per questo scopo, verrà eseguito un CTRTransfer alla versione 11.15.0 della regione alla quale si desidera passare. Dopo aver installato l'immagine, potrai aggiornare normalmente la console al firmware più recente (11.16.0).
+In questa sezione aggiuntiva verrà spiegato come cambiare regionalità sulla tua console. Per questo scopo, verrà eseguito un CTRTransfer alla versione 11.15.0 della regione alla quale si desidera passare. Dopo aver installato l'immagine, potrai aggiornare normalmente la console al firmware più recente (11.16.0).
-Tuttavia, il cambio della regione è quasi completamente inutile in quanto Luma3DS supporta l'avvio di giochi di altre regioni e l'[Emulazione Regionale](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features) su titoli individuali. Inoltre, è possibile avviare giochi NDS con lingue alternative [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Tuttavia, il cambio della regione è quasi completamente inutile in quanto Luma3DS supporta l'avvio di giochi di altre regioni e l'[Emulazione Regionale](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features) su titoli individuali. Inoltre, è possibile avviare giochi NDS con lingue alternative [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). Dovresti eseguire un cambio di regionalità solo se desideri che l'interfaccia utente del tuo sistema sia in una lingua non disponibile nella regione corrente della tua console.
-Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella cartella `/luma/payloads/` della tua scheda SD, per seguire le istruzioni riportate dovrai avviare la console tenendo (Start); apparirà un "menu chainloader" dove dovrai selezionare "GodMode9" tramite il D-Pad e il pulsante (A).
+Questa pagina presuppone che tu abbia già installato Luma3DS e boot9strap. Se hai seguito questo sito web fino alla fine (Completamento dell'installazione), hai Luma3DS e boot9strap.
+{: .notice--info}
+
+Come parte di questo processo, la configurazione di sistema verrà ripristinata ai valori predefiniti. Questo include dati come il tuo nome utente, il paese e la lingua. I giochi installati e i loro dati di salvataggio non verranno toccati.
+{: .notice--warning}
{% capture notice-6 %}
Se cambi la regione della tua console:
@@ -18,20 +22,16 @@ Se cambi la regione della tua console:
+ Non potrai utilizzare il tuo NNID (se ne hai uno). I NNID sono assegnati alla regione in cui sono stati creati.
+ Potresti non essere in grado di accedere all'eShop, anche se [elimini il tuo account eShop](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account). Questo accade perché alcuni titoli rimangono collegati al 3DS, anche dopo la cancellazione dell'account (specialmente su New 3DS).
+ Anche se non è più possibile fare acquisti sull'eShop, è ancora possibile scaricare aggiornamenti dei giochi. Gli aggiornamenti sono di solito necessari per il gioco online.
+ + Questa logica si estende ai Trasferimenti dati, il che vuol dire che non puoi eseguire un Trasferimento dati da un 3DS USA ad un 3DS JPN la cui regionalità è stata cambiata in USA.
+ + Detto questo, i Trasferimenti dati e gli aggiornamenti dei giochi sono comunque limitati dalla regionalità (es. l'eShop giapponese ha solo aggiornamenti per giochi giapponesi).
+ **Non sarai in grado di disinstallare un custom firmware senza brickare la console!** Se hai intenzione di disinstallare il custom firmware in futuro, **DEVI** ripristinare il backup della NAND creato prima del cambiamento di regione.
{% endcapture %}
{{ notice-6 | markdownify }}
-DEVI aver già installato Luma3DS e boot9strap per poter proseguire.
-{: .notice--danger}
-
-Un cambio di regione potrebbe rendere inutilizzabili i giochi in modalità memoria estesa (Monster Hunter, Super Smash Bros, Pokemon Sole/Luna) su console Old 3DS/2DS. Se dovesse accadere, sarà necessario formattare la console (tramite TinyFormat o Impostazioni della console) per risolvere il problema.
-{: .notice--warning}
-
### Cosa serve
-Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [qBittorrent](https://www.qbittorrent.org/download.php) o [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+Per scaricare le immagini CTRTransfer di questa pagina avrai bisogno di un client torrent come [qBittorrent](https://www.qbittorrent.org/download.php) o [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (il file `.zip` di GodMode9)
@@ -72,15 +72,11 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Area di residenza
+#### Sezione VI - Cancellare i dati di salvataggio del sistema
-1. Avvia le Impostazioni della console
-1. Vai su "Impostazioni generali", poi "Profilo", quindi "Area di residenza"
-1. Seleziona un paese relativo alla regione verso cui hai appena effettuato il cambio
-1. Se richiesto, non è necessario selezionare uno stato
-
-#### Sezione VII - Rimozione del file immagine del CTRTransfer
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+La regionalità del tuo 3DS è stata cambiata con successo!
+{: .notice--success}
diff --git a/_pages/it_IT/site-navigation.txt b/_pages/it_IT/site-navigation.txt
index 4d870d0de7..60a617c0b4 100644
--- a/_pages/it_IT/site-navigation.txt
+++ b/_pages/it_IT/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Verifica del CFW](checking-for-cfw)
+ [Contribuisci](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dump di titoli e schede di gioco](dumping-titles-and-game-cartuccie)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [Usare GodMode9](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Pagina iniziale](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installazione di boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installazione di boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installazione di boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installazione di boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installazione di boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installazione di boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installazione di boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installazione di boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/it_IT/troubleshooting.txt b/_pages/it_IT/troubleshooting.txt
index ec9de87bdb..5441405e6e 100644
--- a/_pages/it_IT/troubleshooting.txt
+++ b/_pages/it_IT/troubleshooting.txt
@@ -17,6 +17,7 @@ Pagine guida:
* [Installazione di boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installazione di boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installazione di boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Completamento dell'installazione](#finalizing-setup)
@@ -420,6 +421,31 @@ Se il problema non si risolve, prova ad usare un'altra scheda SD.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+Probabilmente significa che hai già un custom firmware. Dovresti [verificare la presenza di un CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Completamento dell'installazione
@@ -637,7 +663,7 @@ Se non sei stato in grado di trovare il tuo errore o le istruzioni non funzionan
1. Spegni il tuo 3DS
1. Inserisci la scheda SD nel tuo computer
-1. Entra nella cartella `/Nintendo 3DS/(ID di 32 caratteri)/(ID di 32 caratteri)/extdata/00000000/` presente all'interno della tua scheda SD
+1. Entra nella cartella `/Nintendo 3DS///extdata/00000000/` presente all'interno della tua scheda SD
1. Elimina la cartella corrispondente per la tua regione 3DS:
+ **Regione EUR**: Elimina `00000098`
+ **Regione JPN**: Elimina `00000082`
@@ -654,7 +680,7 @@ Se non sei stato in grado di trovare il tuo errore o le istruzioni non funzionan
1. Spegni il tuo 3DS
1. Inserisci la scheda SD nel tuo computer
-1. Entra nella cartella `/Nintendo 3DS/(ID di 32 caratteri)/(ID di 32 caratteri)/extdata/00000000/` presente all'interno della tua scheda SD
+1. Entra nella cartella `/Nintendo 3DS///extdata/00000000/` presente all'interno della tua scheda SD
1. Elimina la cartella corrispondente per la tua regione 3DS:
+ **Regione EUR**: Elimina `000002ce`
+ **Regione JPN**: Elimina `000002cc`
diff --git a/_pages/ja_JP/bannerbomb3.txt b/_pages/ja_JP/bannerbomb3.txt
index 4196903882..2dfb75a2ea 100644
--- a/_pages/ja_JP/bannerbomb3.txt
+++ b/_pages/ja_JP/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### 必要なもの
-* [Seedminer](seedminer) より作成した、 `movable.sed` ファイル
+* Your `movable.sed` file from completing Seedminer or nimhax
#### セクション I - 準備
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/ja_JP/ctrtransfer.txt b/_pages/ja_JP/ctrtransfer.txt
index adda728e52..b3f6017901 100644
--- a/_pages/ja_JP/ctrtransfer.txt
+++ b/_pages/ja_JP/ctrtransfer.txt
@@ -8,20 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-SDカードの/luma/payloadsフォルダに
-godmode9.firm以外のペイロードがある場合、
-起動時に (start) を長押しするとchainloaderメニューが表示されます。
-十字キーでgodmode9を選択して (A) ボタンを押してください。
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-これを使用するには、Luma3DSとboot9strapをインストールしている必要があります。
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### 必要なもの
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -58,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### セクション V - CTRTransferイメージの削除
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/ja_JP/dumping-movable-(nimhax).txt b/_pages/ja_JP/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..8331263423
--- /dev/null
+++ b/_pages/ja_JP/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="目次" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### 必要なもの
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### 手順
+
+#### セクション I - 準備
+
+1. デバイスの電源を切ります
+1. パソコンにSDカードを入れます
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. デバイスにSDカードを入れます
+1. デバイスの電源を入れます
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/ja_JP/finalizing-setup.txt b/_pages/ja_JP/finalizing-setup.txt
index 29f57e0f0d..0222d1c4ab 100644
--- a/_pages/ja_JP/finalizing-setup.txt
+++ b/_pages/ja_JP/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### 必要なもの
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. 「本体設定」→「その他の設定」を開き、1番右のページから「本体の更新」を行います
- + (今使っている) B9S + Luma を使用している状態での本体更新は安全です
- + 更新はせずに、「この本体は最新です。」と表示されます 本体の更新をすでにしている場合、これは当たり前のことです。次のステップの進んで下さい
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### セクション III - Homebrew Launcher
diff --git a/_pages/ja_JP/get-started.txt b/_pages/ja_JP/get-started.txt
index 891db8e5c1..845b6528a3 100644
--- a/_pages/ja_JP/get-started.txt
+++ b/_pages/ja_JP/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/ja_JP/homebrew-launcher-(super-skaterhax).txt b/_pages/ja_JP/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..ea522dad71
--- /dev/null
+++ b/_pages/ja_JP/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="目次" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### 必要なもの
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+####セクションⅡ－準備
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. デバイスの電源を切ります
+1. パソコンにSDカードを入れます
+1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします
+ + SDカードのルートとは、Nintendo 3DSのフォルダなどがある最初の項目のことであり、フォルダの中ではありません。
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. デバイスにSDカードを入れます
+1. デバイスの電源を入れます
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. (A) で続行します
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. デバイスの電源を切ります
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/ja_JP/include/addproxy.txt b/_pages/ja_JP/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/ja_JP/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/ja_JP/include/ctrnand-datayeet.txt b/_pages/ja_JP/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..47aee9c265
--- /dev/null
+++ b/_pages/ja_JP/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. デバイスの電源を切ります
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. `[0:] SDCARD` -> `gm9`へ移動します。
+1. 拡張子.binのCTR Transferイメージの上でXキーを押して削除します
+1. (A) を押して確認します
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. "Copy to 0:/gm9/out" を選択します
+1. (A) で続行します
+1. While still highlighting `00010017`, press (X) to delete it
+1. (A) を押して確認します
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. (A) ボタンを押すとNANDへの書き込みを再ロックできます
+1. STARTキーを押してデバイスを再起動します
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/ja_JP/include/exploit-usm.txt b/_pages/ja_JP/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/ja_JP/include/exploit-usm.txt
+++ b/_pages/ja_JP/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/ja_JP/include/rmproxy.txt b/_pages/ja_JP/include/rmproxy.txt
new file mode 100644
index 0000000000..73dc885cf3
--- /dev/null
+++ b/_pages/ja_JP/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. デバイスの電源を切ります
diff --git a/_pages/ja_JP/include/safemodecheck.txt b/_pages/ja_JP/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/ja_JP/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/ja_JP/include/sysupdate.txt b/_pages/ja_JP/include/sysupdate.txt
new file mode 100644
index 0000000000..75aa20b10a
--- /dev/null
+++ b/_pages/ja_JP/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. 「本体設定」→「その他の設定」を開き、1番右のページから「本体の更新」を行います
+{%- if include.cfw == "true" %}
+ + (今使っている) B9S + Luma を使用している状態での本体更新は安全です
+{%- endif %}
+ + 更新はせずに、「この本体は最新です。」と表示されます This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/ja_JP/installing-boot9strap-(frogtool).txt b/_pages/ja_JP/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..a4ffc0eb8b
--- /dev/null
+++ b/_pages/ja_JP/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="目次" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### 必要なもの
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+####セクションⅡ－準備
+
+1. デバイスの電源を切ります
+1. パソコンにSDカードを入れます
+1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. デバイスにSDカードを入れます
+1. デバイスの電源を入れます
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. 完了した場合、日本語のうごくメモ帳が開きます
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. 再度ダウンロードプレイアプリを開きます。
+1. 画面が表示されるまで待ちます
+ + Do not press either of the buttons
+1. (Lボタン) + (十字キー下) + (Select) を同時に押してRosalina menu を開きます
+1. "Miscellaneous options"を選びます。
+1. "Switch the hb. title to the current app."を選びます。
+1. (B) ボタンで続行します
+1. (B) を押してRosalinaメインメニューに戻ります
+1. (B) を押してRosalinaメインメニューを終了します。
+1. Homeボタンを押しダウンロードプレイを閉じます。
+1. Relaunch the Download Play application
+1. デバイスでHomebrew Launcherが起動されます
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. デバイスの電源を切ります
+
+___
+
+[セットアップを完了する](finalizing-setup) へ進みます
+{: .notice--primary}
diff --git a/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt b/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt
index 9f83b75381..862b5638f9 100644
--- a/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. デバイスの電源を入れます
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### セクション III - boot9strapをインストールする
diff --git a/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt b/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt
index a0ab22b8cc..c23c54ca0d 100644
--- a/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### 必要なもの
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/ja_JP/installing-boot9strap-(safecerthax).txt b/_pages/ja_JP/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..04445dd7be
--- /dev/null
+++ b/_pages/ja_JP/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="目次" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### 必要なもの
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### 手順
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+####セクションⅡ－準備
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. パソコンにSDカードを入れます
+1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします
+ + SDカードのルートとは、Nintendo 3DSのフォルダなどがある最初の項目のことであり、フォルダの中ではありません。
+1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。
+1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。
+1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.bin`をSDカードのルートへコピーします
+1. デバイスにSDカードを入れます
+1. デバイスの電源を入れます
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. デバイスの電源を切ります
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. Exploitが成功すれば、SafeB9SInstallerが起動されます。
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+[セットアップを完了する](finalizing-setup) へ進みます
+{: .notice--primary}
diff --git a/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt b/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt
index 52795b4bf8..ed77643f6b 100644
--- a/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. デバイスの電源を切ります
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/ja_JP/installing-boot9strap-(usm).txt b/_pages/ja_JP/installing-boot9strap-(usm).txt
index 845e65e67a..08be601adb 100644
--- a/_pages/ja_JP/installing-boot9strap-(usm).txt
+++ b/_pages/ja_JP/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### セクション III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/ja_JP/move-emunand.txt b/_pages/ja_JP/move-emunand.txt
index 0a720f2454..fd9a2d934a 100644
--- a/_pages/ja_JP/move-emunand.txt
+++ b/_pages/ja_JP/move-emunand.txt
@@ -9,9 +9,8 @@ title: "EmuNANDを移動する"
このエクストラセクションでは、どうやって古いEmuNANDのコンテンツを新しいSysNAND CFWに移動し、古いEmuNANDパーティションを削除するか紹介します。 EmuNANDとRedNANDは[同じ理論](http://3dbrew.org/wiki/NAND_Redirection)の少々違う実装です。
SDカードの/luma/payloadsフォルダに
-godmode9.firm以外のペイロードがある場合、
-起動時に (start) を長押しするとchainloaderメニューが表示されます。
-十字キーでgodmode9を選択して (A) ボタンを押してください。
+godmode9.firm以外のpayloadファイルがある場合、(START)を押しながら起動すると、「chainloaderメニュー」が表示されます。
+(十字キー)で「GodMode9」を選択して(Aボタン)を押してください。
これを使用するには、Luma3DSとboot9strapをインストールしている必要があります。
{: .notice--danger}
diff --git a/_pages/ja_JP/region-changing.txt b/_pages/ja_JP/region-changing.txt
index b9b37e3e8e..010ded09f6 100644
--- a/_pages/ja_JP/region-changing.txt
+++ b/_pages/ja_JP/region-changing.txt
@@ -6,14 +6,15 @@ title: "リージョンチェンジ"
### 必読事項
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-SDカードの/luma/payloadsフォルダに
-godmode9.firm以外のペイロードがある場合、
-起動時に (start) を長押しするとchainloaderメニューが表示されます。
-十字キーでgodmode9を選択して (A) ボタンを押してください。
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -21,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-これを使用するには、Luma3DSとboot9strapをインストールしている必要があります。
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### 必要なもの
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -47,7 +44,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
~
+ - [Old 3DS or 2DS - 11.15.0 - CHN - CTRTransfer](magnet:?xt=urn:btih:f71d2379e577db22d7f14a656bca7bf2eb5243f8&xt=urn:btmh:12200c6ee93f63deef8ce9023b8214ca36cd29c37d2726acf7a15594256409f6629b&dn=11.15.0-4C_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:fc71540a99c884ab8a4211192d3af92c7ffb9372&xt=urn:btmh:12203c317846d43110fd3a35cedf427cb5fdd58ac764316f4d0634181efbb762ee92&dn=11.15.0-47E_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
- + - [Old 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:7b88adf3f47d036bcdee987f6597770eaafdd8dd&xt=urn:btmh:1220f39be6c14438b07ebdf120161215088d56c59608d5f34f0744d972c7a0cf7ca2&dn=11.15.0-47J_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ + - [Old 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:7b88adf3f47d036bcdee987f6597770eaafdd8dd&xt=urn:btmh:1220f39be6c14438b07ebdf120161215088d56c59608d5f34f0744d972c7a0cf7ca2&dn=11.15.0-47J_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:90d6689106751b057616d32445442fc1b7370e38&xt=urn:btmh:1220a08fe569ac1596f6a113730de3cc7aa0dfd6858d40830cc0f0cee07bf585fd93&dn=11.15.0-41K_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - TWN - CTRTransfer](magnet:?xt=urn:btih:19f978d42b0d9590bc742d7598efa45091567cee&xt=urn:btmh:12204429bc94456825530a2dff233ed399a292e1004a64b65fa4b451a69e116cad2a&dn=11.15.0-39T_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - USA - CTRTransfer](magnet:?xt=urn:btih:fd39778d4116a210c3116c014521120f0e7b9e1d&xt=urn:btmh:12203a51aca201f0635eecb15645cd4598bd49b1ad354e1ea81c24eb488760f3bd2b&dn=11.15.0-47U_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
@@ -75,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### セクション VI - 地域の設定
+#### Section VI - Deleting system save data
-1. 本体設定を起動します
-1. 「その他の設定」に行って、「ユーザー情報」に行って、「地域情報」に行きます
-1. 変更先の地域の国を選択します
-1. ヒントが出るときでも、州を選択する必要がありません
-
-#### セクション VII - CTRTransferイメージを削除
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/ja_JP/site-navigation.txt b/_pages/ja_JP/site-navigation.txt
index db4a58d516..aced04cb9e 100644
--- a/_pages/ja_JP/site-navigation.txt
+++ b/_pages/ja_JP/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3（Linux）](f3-(linux))
+ [F3X（Mac）](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9の使用方法](godmode9-usage)
+ [H2testw（Windows）](h2testw-(windows))
+ [ホームページ](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [boot9strapの導入 (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [boot9strapの導入 (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [boot9strapの導入 (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [boot9strapの導入 (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [boot9strapの導入 (USM)](installing-boot9strap-(usm))
diff --git a/_pages/ja_JP/troubleshooting.txt b/_pages/ja_JP/troubleshooting.txt
index 12ca01a269..f3b4d3e5ae 100644
--- a/_pages/ja_JP/troubleshooting.txt
+++ b/_pages/ja_JP/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/ko_KR/bannerbomb3.txt b/_pages/ko_KR/bannerbomb3.txt
index 650a2f1e4b..64ef350c22 100644
--- a/_pages/ko_KR/bannerbomb3.txt
+++ b/_pages/ko_KR/bannerbomb3.txt
@@ -26,7 +26,7 @@ title: "BannerBomb3"
### 준비물
-* [Seedminer](seedminer)에서 받은 `movable.sed` 파일
+* Seedminer 또는 nimhax에서 받은 `movable.sed` 파일
#### 섹션 I - 준비 작업
@@ -40,12 +40,12 @@ title: "BannerBomb3"
+ 이 작업은 `F00D43D5.bin` DSiWare 파일과 `bb3.bin` 익스플로잇 데이터를 zip 파일로 다운로드 합니다 (`DSIWARE_EXPLOIT.zip`)
1. `DSIWARE_EXPLOIT.zip` 안에 있는 `bb3.bin`을 SD 카드의 루트에 복사해 주세요
+ SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 않 들어가 있는 상태의 폴더 입니다
- + This file does not need to be opened or extracted
+ + 이 파일은 열거나 압축 풀기를 할 필요가 없습니다
![]({{ "/images/screenshots/bb3/bb3-root-layout.png" | absolute_url }}){: .notice--info}
1. SD 카드의 `Nintendo 3DS` -> `` -> `` 폴더로 이동해 주세요
+ ``은 [Seedminer](seedminer)에서 복사한 32글자 폴더명 입니다
+ ``은 `` 안에 있는 32글자 폴더명입니다
- + If you have multiple `` folders, follow the instructions [here](troubleshooting#bannerbomb3)
+ + 여러 개의 `` 폴더가 보인다면, [이 안내](troubleshooting#bannerbomb3)를 따라주세요
![]({{ "/images/screenshots/bb3/dsiware-location-1.png" | absolute_url }}){: .notice--info}
1. `` 폴더에 `Nintendo DSiWare` 폴더를 생성해 주세요
+ 만약 그 폴더가 *있고* 내부에 DSiWare 백업 파일(`<8-character-id>.bin`)이 있다면, PC로 모두 복사해 두고 SD 카드에서 삭제해 주세요
@@ -56,19 +56,15 @@ title: "BannerBomb3"
#### 섹션 II - 하드웨어 버튼 작동 확인
-In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
+이 섹션에서는 기기의 안전 모드 기능을 사용 할 수 있는지 테스트할 것 입니다. 이 테스트는 다음 페이지에 어떤 방법을 취할지 결정합니다.
-1. 전원이 꺼져 있는 상태에서 (L 어깨) + (R 어깨) + (십자 Up) + (A) 를 길게 눌르고, 누르는 상태에서 전원을 켜 주세요
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + 기기가 종료될 겁니다
- + 만약 기기가 HOME 메뉴로 부팅 한다면, 그냥 기기를 종료해 주세요
+{% include_relative include/safemodecheck.txt %}
___
### 다음 단계: 익스플로잇 선택
-If you saw the system update screen in the previous section, Safe Mode is working on your device.
+만약 본체 업데이트 화면이 표시 되었다면, 안전 모드로 부팅을 성공하였다는 의미 입니다.
기기가 안전 모드로 부팅 되었다면, [boot9strap 설치 (USM)](installing-boot9strap-(usm))으로 계속합니다
{: .notice--primary}
diff --git a/_pages/ko_KR/contribute.txt b/_pages/ko_KR/contribute.txt
index 19ba9c38a4..a3becd676e 100644
--- a/_pages/ko_KR/contribute.txt
+++ b/_pages/ko_KR/contribute.txt
@@ -14,7 +14,7 @@ title: "기여하기"
## 배포
-이 가이드 내의 몇 파일들은 토렌트로만 제공되고 있습니다. If you'd like to help seed these torrents to ensure their availability in the future, you can download the `.zip` file containing all our `.torrent` files: [torrents.zip](assets/torrents.zip) (last updated 2023-03-16)
+이 가이드 내의 몇 파일들은 토렌트로만 제공되고 있습니다. 만약 이 토렌트들을 시드해서 미래에 이 파일들이 존재할 가능성을 높이고 싶으시다면, 저희의 모든 `.torrent` 파일들의 포함되어 있는 `.zip` 파일을 다운로드하실 수 있습니다: [torrents.zip](assets/torrents.zip) (2023-03-16 업데이트됨)
미래 토렌트가 나올 시에 업데이트 될 수 있는 [RSS 피드]({{ "rss.xml" | absolute_url }})도 있으며, 구독하실 수 있습니다.
diff --git a/_pages/ko_KR/ctrtransfer.txt b/_pages/ko_KR/ctrtransfer.txt
index 9ece27d22d..f3f56da127 100644
--- a/_pages/ko_KR/ctrtransfer.txt
+++ b/_pages/ko_KR/ctrtransfer.txt
@@ -8,18 +8,15 @@ title: "CTRTransfer"
이것은 기기에 11.15.0 CTRTransfer 이미지를 설치하는 부가 섹션입니다.
-만약 여러분의 SD 카드의 `/luma/payloads/` 폴더에 `GodMode9.firm` 외의 페이로드 파일이 있다면, (Start)를 누르면서 부팅할 시에 화면에 표시되는 "chainloader menu" 에서 십자 패드와 (A) 버튼으로 조작하여 "GodMode9"을 선택하여야 합니다.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-이것은 Luma3DS 및 boot9strap가 이미 설치되어 있어야 가능합니다.
-{: .notice--danger}
-
-구형 3DS/2DS 기기에서는 CTRTransfer 후, 추가 메모리 모드 개임을 (예: 대난투 스매시브라더스, 포켓몬스터 썬/문, 몬스터 헌터)를 사용할 수 없게 될 수 있습니다. 만약 이게 발생한다면, 이 문제를 고치기 위해 (TinyFormat 및 본체 설정을 이용해서) 기기를 포맷하셔야 합니다.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### 준비물
-이 페이지의 [마그넷](https://wikipedia.org/wiki/Magnet_URI_scheme)링크를 사용하려면
- [qBittorrent](https://www.qbittorrent.org/download.php) 또는 [Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* 최신 버전의 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (`.zip` 파일)
@@ -56,9 +53,9 @@ title: "CTRTransfer"
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### 섹션 V - CTRTransfer 이미지 파일 제거
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/ko_KR/dumping-movable-(nimhax).txt b/_pages/ko_KR/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..79d63a9b67
--- /dev/null
+++ b/_pages/ko_KR/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="목차" %}
+
+{% capture technical_info %}
+기술적 상세 정보 (선택 사항)
+
+boot9strap을 설치하려면 우선 각 기기의 고유 암호화 키를 알아내야 합니다. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### 준비물
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### 진행 방법
+
+#### 섹션 I - 준비 작업
+
+1. 기기를 종료해 주세요
+1. SD 카드를 컴퓨터에 삽입해 주세요
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. SD 카드를 기기에 다시 삽입해 주세요
+1. 기기를 시작해 주세요
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+[BannerBomb3](bannerbomb3) 으로 계속합니다
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/ko_KR/finalizing-setup.txt b/_pages/ko_KR/finalizing-setup.txt
index 92407430d7..1a5e17feb5 100644
--- a/_pages/ko_KR/finalizing-setup.txt
+++ b/_pages/ko_KR/finalizing-setup.txt
@@ -22,7 +22,7 @@ title: "마무리 단계"
### 호환성 안내
-만약 이 가이드를 따르기 전의 **New 3DS** 가 펌웨어 버전 2.1.0이었다면, 진행하기 전에 [NAND 백업을 복원](godmode9-usage#restoring-a-nand-backup)해야 합니다. This likely doesn't apply to you unless you were following this guide in 2017.
+만약 이 가이드를 따르기 전의 **New 3DS** 가 펌웨어 버전 2.1.0이었다면, 진행하기 전에 [NAND 백업을 복원](godmode9-usage#restoring-a-nand-backup)해야 합니다. 2017년 전에 이 가이드를 따르지 않았다면 아마 상관이 없을 겁니다.
{: .notice--warning}
만약 이전 CFW가 EmuNAND 기반이었고, 당신의 EmuNAND/RedNAND의 컨텐츠를 SysNAND로 옮기고 싶다면, 이 페이지를 수행하기 이전에 [EmuNAND 이동](move-emunand) 을 따라주시기 바랍니다. 만약 EmuNAND가 뭔지 모르신다면, 이것은 무시하셔도 됩니다.
@@ -31,7 +31,7 @@ title: "마무리 단계"
### 준비물
* 최신 버전의 [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (`.cia` 파일)
-* v3.7.4의 [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (`.cia` 파일)
+* v3.7.4의 [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (`.cia` 파일)
* 최신 버전의 [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (`.cia` 파일)
* 최신 버전의 [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (`.cia` 파일)
* 최신 버전의 [FBI](https://github.com/Steveice10/FBI/releases/latest) (`.cia` 와 `.3dsx`의 **양** 파일들)
@@ -70,11 +70,7 @@ title: "마무리 단계"
이 섹션에서는 커스텀 펌웨어가 설치된 기기에서도 안전하게 이용 가능한 최신 버전의 펌웨어로 본체를 업데이트합니다.
-1. 본체 설정의 "기타 설정"에서 가장 오른쪽에 있는 "본체 업데이트"를 선택해 기기를 업데이트해 주세요
- + boot9strap과 Luma을 이용한 (지금 가지고 계신 버전) 업데이트는 안전합니다
- + 이 작업에서 "이 본체는 이미 최신 버전으로 업데이트되어 있습니다" 라는 메세지가 표시 될 수 가 있습니다. 이미 최신 버전이였다면, 이것은 문제가 아니며, 다음 섹션으로 넘어가 주시기 바랍니다
- + 오류가 발생하면 DNS 설정과 Proxy 설정을 "자동"으로 설정해 주세요
- + 그래도 에러가 발생하면, [문제 해결](troubleshooting#finalizing-setup)을 따라 주세요.
+{% include_relative include/sysupdate.txt cfw="true" %}
#### 섹션 III - Homebrew Launcher
@@ -140,7 +136,7 @@ title: "마무리 단계"
1. "SysNAND Backup"을 선택해 주세요
1. (A)를 눌러 확인해 주세요
+ 이 과정은 시간이 좀 걸릴 것입니다
- + If you get an error, look for your issue in the [troubleshooting guide](troubleshooting#finalizing-setup)
+ + 만약 에러가 발생하면, [문제 해결 가이드](troubleshooting#finalizing-setup)를 참고해 주세요
1. (A)를 눌러 진행해 주세요
1. (B)를 눌러 메인 메뉴로 돌아가 주세요
1. "Exit"를 선택해 주세요
diff --git a/_pages/ko_KR/get-started.txt b/_pages/ko_KR/get-started.txt
index bb9cbebb47..e0a45e78fb 100644
--- a/_pages/ko_KR/get-started.txt
+++ b/_pages/ko_KR/get-started.txt
@@ -23,17 +23,21 @@ title: "시작하기"
#### 섹션 III - 방법 선택
-To find the correct method for your device, please enter the system version you found in Section II.
+올바른 방법을 사용하기 위해, 섹션 II에서 확인한 시스템 버전을 입력해 주세요.
+
+{% capture noneSelected %}
+시스템 모델을 선택하세요.
+{% endcapture %}
{% capture invalidVersion %}
-This doesn't seem to be a valid system version.
+올바른 시스템 버전으로 확인되지 않습니다.
{% endcapture %}
{% capture methodUnavailable %}
-You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
+이 시스템 버전은 현재 일반 방법으로 해킹이 불가능 합니다. 기기를 해킹하고 싶다면, ntrboot 방법을 사용해야 합니다.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### 다른 방법
diff --git a/_pages/ko_KR/homebrew-launcher-(super-skaterhax).txt b/_pages/ko_KR/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..09b746d7a9
--- /dev/null
+++ b/_pages/ko_KR/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="목차" %}
+
+{% capture technical_info %}
+기술적 상세 정보 (선택 사항)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### 호환성 안내
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### 준비물
+
+* 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (`.zip` 파일)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### 섹션 II - 준비 작업
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. 기기를 종료해 주세요
+1. SD 카드를 컴퓨터에 삽입해 주세요
+1. Luma3DS `.zip`안에 있는 `boot.firm`과 `boot.3dsx`를 SD 카드의 루트에 복사해 주세요
+ + SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 않 들어가 있는 상태의 폴더 입니다
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. SD 카드를 기기에 다시 삽입해 주세요
+1. 기기를 시작해 주세요
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + 보안 인증서 경고가 표시되면, (A)를 눌러 연결을 허용하세요
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. (A)를 눌러 진행해 주세요
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. 기기를 종료해 주세요
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+만약 본체 업데이트 화면이 표시 되었다면, 안전 모드로 부팅을 성공하였다는 의미 입니다.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/ko_KR/include/addproxy.txt b/_pages/ko_KR/include/addproxy.txt
new file mode 100644
index 0000000000..0ccee8707c
--- /dev/null
+++ b/_pages/ko_KR/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. 본체 설정 에플리케이션을 실행해 주세요
+1. `인터넷 설정` -> `인터넷 접속 설정`으로 이동해 주세요
+1. 네트워크 접속 경로을 클릭해, `설정 변경` -> `다음 페이지 (오른쪽 화살표)` -> `Proxy 설정`으로 이동해 주세요
+1. "Proxy 설정"을 "예"로 설정하고, `세부 설정`을 눌러 주세요
+1. Proxy 서버를 `192.9.234.11`로 설정하고, 포트를 `8080`으로 설정해 주세요
+1. OK하고 저장을 차례로 눌러주세요
+1. 접속 테스트 안내문이 표시되면, `예`를 눌러 인터넷 접속 테스트를 진행해 주세요
+ + 이 테스트가 성공적일 겁니다
+1. "OK"을 눌러 진행해 주세요
diff --git a/_pages/ko_KR/include/configure-luma3ds.txt b/_pages/ko_KR/include/configure-luma3ds.txt
index 14f6fc377a..b52be4ef86 100644
--- a/_pages/ko_KR/include/configure-luma3ds.txt
+++ b/_pages/ko_KR/include/configure-luma3ds.txt
@@ -1,5 +1,5 @@
-1. Your device should have booted into the Luma3DS configuration menu
+1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다
+ Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다
- + For the purpose of this guide, **leave these options on the default settings** (do not check or uncheck anything)
+ + 일단 이 가이드에서는 **모든 설정을 기본으로 남겨 두세요** (켜기 또는 끄기를 누르지 마세요)
+ 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD 카드의 루트로 복사 했는지 확인해 주세요
1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요
diff --git a/_pages/ko_KR/include/ctrnand-datayeet.txt b/_pages/ko_KR/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..ac1d112a04
--- /dev/null
+++ b/_pages/ko_KR/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. 기기를 종료해 주세요
+1. (Start)를 길게 누르고, 이 상태에서 전원을 켜 주세요. GodMode9이 실행 될 겁니다
+1. `[0:] SDCARD` -> `gm9`으로 이동해 주세요
+1. CTRTransfer 이미지 `.bin`에 (X)를 눌러 삭제해 주세요
+1. (A)를 눌러 확인해 주세요
+1. (B) 버튼을 여러 번 눌러 메인 메뉴로 돌아가 주세요
+1. `[1:] SYSNAND CTRNAND` -> `data` -> -> `sysdata` -> `` 폴더로 이동해 주세요
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. "Copy to 0:/gm9/out"를 선택해 주세요
+1. (A)를 눌러 진행해 주세요
+1. While still highlighting `00010017`, press (X) to delete it
+1. (A)를 눌러 확인해 주세요
+1. (A) 를 눌러 SysNAND (lvl2) 쓰기 잠금을 풀고 화면에 표시된 키 조합을 입력해 주세요
+1. 작업이 완료되면 (A)를 눌려 계속해 주세요
+1. 메세지가 표시되면, (A)를 눌러서 쓰기잠금을 확인해 주세요
+1. (Start)를 눌러 기기를 다시 시작해 주세요
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/ko_KR/include/exploit-usm.txt b/_pages/ko_KR/include/exploit-usm.txt
index 12f9fd5465..46cbe4e67e 100644
--- a/_pages/ko_KR/include/exploit-usm.txt
+++ b/_pages/ko_KR/include/exploit-usm.txt
@@ -2,11 +2,6 @@
1. 전원이 꺼져 있는 상태에서 (L 어깨) + (R 어깨) + (십자 Up) + (A) 를 길게 눌르고, 누르는 상태에서 전원을 켜 주세요
+ 안전 모드로 부팅 될 때 까지 버튼들을 눌러 주세요 ("시스템 업데이트" 메뉴)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + 만약 여러번 시도해도 안전 모드로 부팅이 않된다면, 기기의 버튼 중 하나가 고장 나 있을수 있습니다. 이 경우, [Nintendo Homebrew Discord 서버](https://discord.gg.MWxPgEp)에 오셔서 도움을 요청하세요.
-{%- elsif include.method == "bb3" %}
- + 만약 여러번 시도해도 안전 모드로 부팅이 않된다면, 기기의 버튼 중 하나가 고장 나 있을수 있습니다. 이 경우, [BannerBomb3의 다른 옵션](installing-boot9strap-(fredtool))을 따라야 합니다. 이 방법에 도움이 필요하다면, [Nintendo Homebrew Discord 서버](https://discord.gg/MWxPgEp)에서 영어로 도움을 요청해 주세요.
-{%- endif %}
1. "OK"를 선택해서 업데이트를 확인해 주세요
+ 실제로 업데이트를 하는 것은 아닙니다. 이것은 익스플로잇의 일부입니다
1. "동의함"를 눌러서 이용 약관에 동의해 주세요
@@ -14,3 +9,5 @@
1. "인터넷 접속 설정을 하시겠습니까?"라는 알림이 표시되면 "예"를 눌러주세요
1. 이 화면에서, `접속 경로 1` -> `설정 변경` -> `다음 페이지 (오른쪽 화살표)` -> `Proxy 설정` -> `세부 설정` 으로 이동해 주세요 ([사진 (영어)](/images/screenshots/usm/safemode_highlighted.png))
1. 익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + 만약 기기의 붉은 화면이 표시되면, SD 카드 루트에 `usm.bin`이 존재하지 않습니다
\ No newline at end of file
diff --git a/_pages/ko_KR/include/install-boot9strap-b9stool.txt b/_pages/ko_KR/include/install-boot9strap-b9stool.txt
index 9dbd320e82..7bf37c54ae 100644
--- a/_pages/ko_KR/include/install-boot9strap-b9stool.txt
+++ b/_pages/ko_KR/include/install-boot9strap-b9stool.txt
@@ -16,9 +16,9 @@
1. 익스플로잇이 성공적이었다면 b9sTool을 실행했을 것입니다
1. 십자 패드를 사용해서, "Install boot9strap"으로 이동해 주세요.
{%- if include.method == "dsinternet" %}
- + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open Nintendo DS Connections and start over from the beginning of this section
+ + 이 단계를 놓쳤다면, 시스템은 boot9strap을 설치하는 대신 HOME 메뉴로 나가집니다. 이렇게 되면 다시 DS 소프트웨어용 설정을 열어서 이 섹션의 처음부터 시작해야 합니다
{%- elsif include.method == "dsdlp" %}
- + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open DS Download Play and start over from the beginning of this section
+ + 이 단계를 놓쳤다면, 시스템은 boot9strap을 설치하는 대신 HOME 메뉴로 나가집니다. 이렇게 되면 다시 DS 다운로드 플레이를 열어서 이 섹션의 처음부터 시작해야 합니다
{%- endif %}
1. (A) 버튼을 누른 후, START와 SELECT를 동시에 눌러 작업을 실행해 주세요
1. 완료되고 아래 화면에 "done."이라고 표시되면, b9sTool를 종료하고 기기의 전원을 꺼 주세요
diff --git a/_pages/ko_KR/include/launch-hbl-dlp.txt b/_pages/ko_KR/include/launch-hbl-dlp.txt
index 819aa488da..d165fabf7b 100644
--- a/_pages/ko_KR/include/launch-hbl-dlp.txt
+++ b/_pages/ko_KR/include/launch-hbl-dlp.txt
@@ -9,4 +9,4 @@
1. (Home) 키를 누르고, 다운로드 플레이를 종료해 주세요
1. 다운로드 플레이 앱을 실행해 주세요
1. 성공하면 Homebrew Launcher가 실행될 것입니다
- + If your device is stuck on the loading splash screen, you are missing `boot.3dsx` from the root of your SD card
+ + 만약 기기가 `Nintendo 3DS` 화면에 정지되면, SD 카드 루트에 `boot.3dsx`이 존재하지 않습니다
diff --git a/_pages/ko_KR/include/nand-backup.txt b/_pages/ko_KR/include/nand-backup.txt
index c0bb5a8aca..979ee15408 100644
--- a/_pages/ko_KR/include/nand-backup.txt
+++ b/_pages/ko_KR/include/nand-backup.txt
@@ -5,7 +5,7 @@
1. "SysNAND Backup"을 선택해 주세요
1. (A)를 눌러 확인해 주세요
+ 이 과정은 시간이 좀 걸릴 것입니다
- + If you get an error, look for your issue in the [troubleshooting guide](troubleshooting#finalizing-setup)
+ + 만약 에러가 발생하면, [문제 해결 가이드](troubleshooting#finalizing-setup)를 참고해 주세요
1. (A)를 눌러 진행해 주세요
1. (B)를 눌러 메인 메뉴로 돌아가 주세요
1. "Exit"를 선택해 주세요
diff --git a/_pages/ko_KR/include/rmproxy.txt b/_pages/ko_KR/include/rmproxy.txt
new file mode 100644
index 0000000000..8c2a42b91e
--- /dev/null
+++ b/_pages/ko_KR/include/rmproxy.txt
@@ -0,0 +1,10 @@
+이 섹션에서는, 인터넷 설정을 복원할 것입니다.
+
+1. 본체 설정 에플리케이션을 실행해 주세요
+1. `인터넷 설정` -> `인터넷 접속 설정`으로 이동해 주세요
+1. 네트워크 접속 경로을 클릭해, `설정 변경` -> `다음 페이지 (오른쪽 화살표)` -> `Proxy 설정`으로 이동해 주세요
+1. "Proxy 설정"을 "아니요"로 설정해 주세요
+1. OK하고 저장을 차례로 눌러주세요
+1. 접속 테스트 안내문이 표시되면, `예`를 눌러 인터넷 접속 테스트를 진행해 주세요
+ + 이 테스트가 성공적일 겁니다
+1. 기기를 종료해 주세요
diff --git a/_pages/ko_KR/include/safemodecheck.txt b/_pages/ko_KR/include/safemodecheck.txt
new file mode 100644
index 0000000000..b05bc102f1
--- /dev/null
+++ b/_pages/ko_KR/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. 전원이 꺼져 있는 상태에서 (L 어깨) + (R 어깨) + (십자 Up) + (A) 를 길게 눌르고, 누르는 상태에서 전원을 켜 주세요
+ + 본체 업데이트 화면으로 부팅 될 때 까지 버튼들을 눌러 주세요 (이것이 안전 모드 입니다)
+1. 만약 업데이트 메세지가 표시되면, 그만두기 버튼을 눌러 주세요
+ + 기기가 종료될 겁니다
+ + 만약 기기가 HOME 메뉴로 부팅 한다면, 그냥 기기를 종료해 주세요
diff --git a/_pages/ko_KR/include/seedminer-base.txt b/_pages/ko_KR/include/seedminer-base.txt
index 53de17d499..c201581556 100644
--- a/_pages/ko_KR/include/seedminer-base.txt
+++ b/_pages/ko_KR/include/seedminer-base.txt
@@ -12,15 +12,15 @@ Seedminer이 정확히 어떻게 작동하는지 배우고 싶다면 [이 프레
{: .notice--info}
-### Section I - Updating the System
+### 섹션 I - 본체 업데이트
-In this section, you will update your system to the latest version, which is necessary for Seedminer.
+이 섹션에서는 Seedminer를 사용하기 위해 최신 버전의 펌웨어로 본체를 업데이트합니다.
1. 본체 설정의 "기타 설정"에서 가장 오른쪽에 있는 "본체 업데이트"를 선택해 기기를 업데이트해 주세요
- + 이 작업에서 "이 본체는 이미 최신 버전으로 업데이트되어 있습니다" 라는 메세지가 표시 될 수 가 있습니다. This is normal if you are already up to date; continue to the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+ + 이 작업에서 "이 본체는 이미 최신 버전으로 업데이트되어 있습니다" 라는 메세지가 표시 될 수 가 있습니다. 이미 최신 버전이였다면, 이것은 문제가 아니며, 다음 섹션으로 넘어가 주시기 바랍니다
+ + 오류가 발생하면 DNS 설정과 Proxy 설정을 "자동"으로 설정해 주세요
-### Section II - Prep Work
+### 섹션 II - 준비 작업
이 섹션에서는 암호화 키를 알아내기 위한 정보를 3DS로부터 수집합니다.
@@ -47,7 +47,7 @@ Before following this section:
+ 만일 오류가 발생하고 메뉴 밖으로 튕겨져 나갔더라면, 기기가 닌텐도의 서버에 연결하지 못했기 때문입니다.(기기 밴 또는 연결 문제로 인하여)
1. 본인의 Mii 프로필로 이동하고, 위 화면에 있는 "친구 코드"를 확인해 주세요
-### Section III - Seedminer
+### 섹션 III - Seedminer
이 섹션에서는 Bruteforce Movable 웹사이트를 이용하여 기기의 암호화 키를 계산하고, 이것을 `movable.sed` 파일로 저장합니다.
@@ -68,5 +68,5 @@ Before following this section:
+ 이 과정을 하는 동안 봇이 기기에 표시가 안 될수도 있습니다. 웹사이트가 계속 업데이트 하는 경우, 이것은 문제가 아닙니다
+ 만약 30분이 지나서도 완료가 안된다면, [Nintendo Homebrew Discord 서버](https://discord.gg/MWxPgEp)에서 영어로 물어보세요. "Bruteforce Movable is not working. Could someone help me?"정도 질문이 적당할 것 입니다
1. 과정이 끝나면, `movable.sed` 파일을 다운로드 해 주세요
- + Keep this file as you will need it in the upcoming page
+ + 이 파일은 나중에도 사용되니 일단 보관해 두세요
1. 기기를 종료해 주세요
\ No newline at end of file
diff --git a/_pages/ko_KR/include/sysupdate.txt b/_pages/ko_KR/include/sysupdate.txt
new file mode 100644
index 0000000000..5f5cf3d380
--- /dev/null
+++ b/_pages/ko_KR/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. 본체 설정의 "기타 설정"에서 가장 오른쪽에 있는 "본체 업데이트"를 선택해 기기를 업데이트해 주세요
+{%- if include.cfw == "true" %}
+ + boot9strap과 Luma을 이용한 (지금 가지고 계신 버전) 업데이트는 안전합니다
+{%- endif %}
+ + 이 작업에서 "이 본체는 이미 최신 버전으로 업데이트되어 있습니다" 라는 메세지가 표시 될 수 가 있습니다. 이미 최신 버전이였다면, 이것은 문제가 아니며, 다음 섹션으로 넘어가 주시기 바랍니다
+ + 오류가 발생하면 DNS 설정과 Proxy 설정을 "자동"으로 설정해 주세요
+{%- if include.cfw == "true" %}
+ + 그래도 에러가 발생하면, [문제 해결](troubleshooting#finalizing-setup)을 따라 주세요.
+{%- endif %}
diff --git a/_pages/ko_KR/installing-boot9strap-(frogtool).txt b/_pages/ko_KR/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..6ef9e5f44e
--- /dev/null
+++ b/_pages/ko_KR/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="목차" %}
+
+{% capture technical_info %}
+기술적 상세 정보 (선택 사항)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### 준비물
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### 섹션 I - CFW 확인
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### 섹션 II - 준비 작업
+
+1. 기기를 종료해 주세요
+1. SD 카드를 컴퓨터에 삽입해 주세요
+1. Luma3DS `.zip`안에 있는 `boot.firm`과 `boot.3dsx`를 SD 카드의 루트에 복사해 주세요
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. SD 카드를 기기에 다시 삽입해 주세요
+1. 기기를 시작해 주세요
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. 만약 익스플로잇이 성공적이었다면, 기기는 JPN 버전의 Flipnote Studio를 실행할 겁니다
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### 섹션 VI - Luma3DS 구성
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### 섹션 VII - DS 소프트웨어용 설정 복구
+
+1. 다운로드 플레이 앱을 실행해 주세요
+1. 두 가지의 버튼이 화면에 뜰 때까지 기다려 주세요
+ + 이 버튼들을 누르지 마세요
+1. (L 어깨) + (십자 Down) + (Select) 을 동시에 눌러서 Rosalina 메뉴를 실행해 주세요
+1. "Miscellaneous options"을 선택해 주세요
+1. "Switch the hb. title to the current app."를 선택해 주세요
+1. (B)를 눌러 진행해 주세요
+1. (B)를 눌러 Rosalina 메뉴로 돌아가 주세요
+1. (B)를 눌러 Rosalina 메뉴를 나와 주세요
+1. (Home) 키를 누르고, 다운로드 플레이를 종료해 주세요
+1. 다운로드 플레이 앱을 다시 실행해 주세요
+1. 성공하면 Homebrew Launcher가 실행될 것입니다
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. 기기를 종료해 주세요
+
+___
+
+### [마무리 단계](finalizing-setup) 로 계속합니다
+{: .notice--primary}
diff --git a/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt b/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt
index 918c34b982..fdff481bdf 100644
--- a/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ unSAFE_MODE의 더 자세한 설명은 [여기 (영문)](https://github.com/zoog
이 섹션에서는, Homebrew Launcher 메뉴에서 slotTool을 실행해, Wi-Fi 연결 슬롯을 수정된 데이터로 덮어씌웁니다. 그 다음, 기기의 SD 카드에 unSAFE_MODE 취약점을 실행하기 위한 파일을 복사하게 됩니다. 이 취약점을 실행함으로서, 기기의 Wi-Fi 연결 설정은 일시적으로 덮어씌워집니다.
-1. 기기는 이미 전 페이지에 이하여 전원은 켜져 있고 Homebrew Launcher가 표시되어 있을 겁니다
- + 만약 이렇지 않다면, 기기를 시작하고, 아무 방법으로 Homebrew Launcher를 실행해 주세요 (이 방법은 아마 Pokémon Picross일 겁니다)
+1. 기기를 시작해 주세요
+1. 아무 방법을 사용해 Homebrew Launcher를 실행해 주세요 (아마 인터넷 브라우저일 겁니다)
1. 홈브류 목록에서 slotTool를 실행해 주세요
+ 여기서 붉은 화면이 표시되면, 전원 버튼을 15초 눌러 기기를 강제로 종료하고, 이 섹션을 다시 시도해 주세요
1. "INSTALL exploit to wifi slots 1,2,3 & shutdown" 옵션을 선택해 주세요
@@ -56,7 +56,7 @@ unSAFE_MODE의 더 자세한 설명은 [여기 (영문)](https://github.com/zoog
#### 섹션 II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### 섹션 III - boot9strap 설치하기
diff --git a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt
index b233294a50..dc7c31beb6 100644
--- a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ kartdlphax와 unSAFE_MODE의 더 자세한 설명은 다음 (영어) 페이지
- 두 3DS와 지역이 같은, 마리오 카트 7의 물리적/디지털 버전
- 두 3DS를 위한 SD 카드
-만약 **타겟 3DS**의 (L/R 어깨 버튼), (위 십자 패드), 또는 (A) 버튼이 동작되지 않다면, 이 설명서를 따를 수 없습니다. 이 경우, [Nintendo Homebrew Discord 서버](https://discord.gg.MWxPgEp)에 오셔서 도움을 요청하세요.
-{: .notice--warning}
-
### 준비물
**소스 3DS** (커스텀 펌웨어가 설치된 3DS)에서:
* 최신 버전의 [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest`) (`plugin.3gx`)
-* 최신 버전의 [Luma3DS 3GX Loader 버전](https://github.com/Nanquitas/Luma3DS/releases/latest`) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
**타겟 3DS** (커스텀 펌웨어를 설치하려고 하는 3DS)에서:
@@ -47,7 +44,14 @@ kartdlphax와 unSAFE_MODE의 더 자세한 설명은 다음 (영어) 페이지
* 최신 버전의 [일반 Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (Luma3DS `.zip` 파일)
* 최신 버전의 [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (RELEASE `.zip` 파일)
-#### 섹션 I - 준비 작업 (소스 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. 이 경우, [Nintendo Homebrew Discord 서버](https://discord.gg.MWxPgEp)에 오셔서 도움을 요청하세요.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
이 섹션에서는, 소스 3DS (커스텀 펌웨어가 설치 되어 있는 기기)를 익스플로잇 데이터를 타겟 3DS로 전송할 수 있도록 설정합니다.
@@ -61,7 +65,7 @@ kartdlphax와 unSAFE_MODE의 더 자세한 설명은 다음 (영어) 페이지
- `plugins` 폴더와 `00040000...` 폴더가 없으면 만들어 주세요
1. SD 카드를 분리해 **소스 3DS**에 장착해 주세요
-#### 섹션 II - 준비 작업 (타겟 3DS)
+#### Section III - Prep Work (target 3DS)
이 섹션에서는, 타겟 3DS (커스텀 펌웨어를 설치 할 기기)에서 unSAFE_MODE 익스플로잇을 실행할 수 있는 파일을 SD 카드로 복사합니다.
@@ -75,7 +79,7 @@ kartdlphax와 unSAFE_MODE의 더 자세한 설명은 다음 (영어) 페이지
1. unSAFE_MODE `.zip`안에 있는 `slotTool` 폴더를 SD 카드의 `3ds` 폴더에 복사해 주세요
1. SD 카드를 분리해 **타겟 3DS**에 장착해 주세요
-#### 섹션 III - kartdlphax
+#### Section IV - kartdlphax
이 섹션에서는, **소스 3DS**에서 **타겟 3DS**로 Wi-Fi 슬롯을 덮어씌우기 위한 익스플로잇 데이터를 다운로드 플레이를 통해 전송합니다. 이 취약점을 실행함으로서, 기기의 Wi-Fi 연결 설정은 일시적으로 덮어씌워집니다.
@@ -111,18 +115,18 @@ kartdlphax와 unSAFE_MODE의 더 자세한 설명은 다음 (영어) 페이지
이후 과정을 완료할 때에는, **소스 3DS**가 필요하지 **않습니다**. 이후 과정은 **타겟 3DS**만 이용하여 완료할 수 있습니다.
{: .notice--info}
-#### 섹션 IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### 섹션 V - boot9strap 설치
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### 섹션 VI - Wi-Fi 프로필 복구
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/ko_KR/installing-boot9strap-(safecerthax).txt b/_pages/ko_KR/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..5ed58d308c
--- /dev/null
+++ b/_pages/ko_KR/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="목차" %}
+
+{% capture technical_info %}
+기술적 상세 정보 (선택 사항)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### 호환성 안내
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### 준비물
+
+* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (직접 다운로드)
+* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (직접 다운로드)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### 진행 방법
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### 섹션 II - 준비 작업
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. SD 카드를 컴퓨터에 삽입해 주세요
+1. Luma3DS `.zip`안에 있는 `boot.firm`과 `boot.3dsx`를 SD 카드의 루트에 복사해 주세요
+ + SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 않 들어가 있는 상태의 폴더 입니다
+1. SD 카드이 루트에 `boot9strap` 라는 이름으로 새 폴더를 생성해 주세요
+1. SD 카드에 있는 `/boot9strap/` 폴더에 boot9strap `.zip` 파일 안에 압축되있는 `boot9strap.firm`과 `boot9strap.firm.sha`을 복사해 주세요
+1. SafeB9SInstaller `.zip`의 `SafeB9SInstaller.bin`을 SD 카드의 루트로 복사해 주세요
+1. SD 카드를 기기에 다시 삽입해 주세요
+1. 기기를 시작해 주세요
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. 기기를 종료해 주세요
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. 전원이 꺼져 있는 상태에서 (L 어깨) + (R 어깨) + (십자 Up) + (A) 를 길게 눌르고, 누르는 상태에서 전원을 켜 주세요
+ + 안전 모드로 부팅 될 때 까지 버튼들을 눌러 주세요 ("시스템 업데이트" 메뉴)
+1. "OK"를 선택해서 업데이트를 확인해 주세요
+ + 실제로 업데이트를 하는 것은 아닙니다. 이것은 익스플로잇의 일부입니다
+1. "동의함"를 눌러서 이용 약관에 동의해 주세요
+1. 이 업데이트는 에러 코드 `003-1099` 와 같이 실패를 할 겁니다. 이것은 의도적 행동입니다
+1. Press "OK" to close the error message
+1. 익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### 섹션 V - boot9strap 설치
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### [마무리 단계](finalizing-setup) 로 계속합니다
+{: .notice--primary}
diff --git a/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt b/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt
index 52e9a582f8..7eb5b3f090 100644
--- a/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ SSLoth는 시스템 버전 11.13.0 및 이전 버전에 있는 사용자가 브
이 섹션에서는, 브라우저가 시스템 업데이트 없이도 정상 작동할 수 있도록, 인터넷 연결 설정을 프록시 네트워크를 이용하게 변경하게 됩니다. 이렇게 하면 다음 섹션에서 브라우저 익스플로잇에 접근할 수 있게 됩니다.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. 본체 설정 에플리케이션을 실행해 주세요
-1. `인터넷 설정` -> `인터넷 접속 설정`으로 이동해 주세요
-1. 네트워크 접속 경로을 클릭해, `설정 변경` -> `다음 페이지 (오른쪽 화살표)` -> `Proxy 설정`으로 이동해 주세요
-1. "Proxy 설정"을 "예"로 설정하고, `세부 설정`을 눌러 주세요
-1. Proxy 서버를 `192.9.234.11`로 설정하고, 포트를 `8080`으로 설정해 주세요
-1. OK하고 저장을 차례로 눌러주세요
-1. 접속 테스트 안내문이 표시되면, `예`를 눌러 인터넷 접속 테스트를 진행해 주세요
- + 이 테스트가 성공적일 겁니다
-1. "OK"을 눌러 진행해 주세요
+{% include_relative include/addproxy.txt %}
1. "뒤로"을 두 번 누르고 "종료"를 눌러 HOME 메뉴로 돌아가 주세요
#### 섹션 III - SafeB9SInstaller 실행
이 섹션에서는, boot9strap (커스텀 펌웨어) 설치 도구를 실행하기 위해 브라우저 익스플로잇 웹페이지에서 universal-otherapp을 실행합니다.
-1. HOME 메뉴에서 L, R 버튼을 동시에 눌러 카메라를 여세요
+1. HOME 메뉴에서 L, R 버튼을 동시에 눌러 카메라를 열어 주세요
+ 카메라가 사용이 불가능하다면, 인터넷 브라우저를 열어 다음 URL을 직접 입력하세요: `https://zoogie.github.io/web/nbhax/`
1. QR 코드 버튼을 눌러 [이 QR 코드](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) 를 스캔해 주세요
+ 오류가 발생하면 이 [문제 해결 가이드](troubleshooting#installing-boot9strap-ssloth-browser) 를 참고해 주세요
@@ -88,16 +77,7 @@ If you haven't already, make sure you have a working Internet connection set up
#### 섹션 V - 기본 프록시 복원
-이 섹션에서는, 인터넷 설정을 복원할 것입니다.
-
-1. 본체 설정 에플리케이션을 실행해 주세요
-1. `인터넷 설정` -> `인터넷 접속 설정`으로 이동해 주세요
-1. 네트워크 접속 경로을 클릭해, `설정 변경` -> `다음 페이지 (오른쪽 화살표)` -> `Proxy 설정`으로 이동해 주세요
-1. "Proxy 설정"을 "아니요"로 설정해 주세요
-1. OK하고 저장을 차례로 눌러주세요
-1. 접속 테스트 안내문이 표시되면, `예`를 눌러 인터넷 접속 테스트를 진행해 주세요
- + 이 테스트가 성공적일 겁니다
-1. 기기를 종료해 주세요
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/ko_KR/installing-boot9strap-(usm).txt b/_pages/ko_KR/installing-boot9strap-(usm).txt
index f1dd40c073..89ba01f019 100644
--- a/_pages/ko_KR/installing-boot9strap-(usm).txt
+++ b/_pages/ko_KR/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ BannerBomb3와 unSAFE_MODE의 더 자세한 설명은 다음 (영어) 페이지
#### 섹션 III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### 섹션 IV - boot9strap 설치
diff --git a/_pages/ko_KR/key-information.txt b/_pages/ko_KR/key-information.txt
index 640d9595d6..4f68d0d67f 100644
--- a/_pages/ko_KR/key-information.txt
+++ b/_pages/ko_KR/key-information.txt
@@ -27,7 +27,7 @@ title: "주요 내용"
컴퓨터 호환성
![]({{ "/images/screenshots/onboarding/os.jpg" | absolute_url }})
{: .notice--info}
-You can follow this guide as long as you are able to download files from the Internet and copy them to your SD card. Depending on your computer/phone/electronic device, you may need to purchase a USB to SD card adapter to allow your computer to read your SD card.
+이 가이드는 인터넷에서 파일을 다운로드 하고 SD카드에 옮길 수 있어야만 이용 가능합니다. 본인의 컴퓨터/스마트폰/전자기기에 따라서 컴퓨터에서 SD 카드를 읽기 위해 USB->SD 카드 어댑터를 구매해야 할 수도 있습니다.
{% endcapture %}
{{ compat | markdownify }}
@@ -37,10 +37,10 @@ You can follow this guide as long as you are able to download files from the Int
![]({{ "/images/screenshots/onboarding/sdcard.jpg" | absolute_url }})
{: .notice--info}
-3DS 모델에 따라 SD카드 슬롯의 위치나 호환되는 종류가 다릅니다. More information can be found on [Nintendo's official support page](https://en-americas-support.nintendo.com/app/answers/detail/a_id/271/~/how-to-insert-an-sd-card-or-microsd-card).
+3DS 모델에 따라 SD카드 슬롯의 위치나 호환되는 종류가 다릅니다. 자세한 정보는 [닌텐도 공식 지원](https://www.nintendo.co.kr/3DS/customer/qna.php) 에서 찾아볼 수 있습니다.
-The 3DS can read SD cards of any capacity (even those larger than 32GB), but the card must be formatted as FAT32 (**not** exFAT or NTFS). You can use one of the following tools to format your SD card, depending on your operating system: [Windows](formatting-sd-(windows)), [macOS](formatting-sd-(mac)), [Linux](formatting-sd-(linux)).
+3DS는 어떤 용량의 SD 카드도 읽을 수 있습니다. (32GB보다 크더라도요), 하지만 SD 카드는 무조건 FAT32로 포맷되어 있어야합니다. (exFAT이나 NTFS **말구요**). SD 카드를 포맷하기 위해 자신의 OS에 해당하는 프로그램을 사용할 수 있습니다: [Windows](formatting-sd-(windows)), [macOS](formatting-sd-(mac)), [Linux](formatting-sd-(linux)).
이 가이드를 따르려면, 적어도 **2GB**용량의 SD 카드를 사용해야 합니다.
{: .notice--warning}
diff --git a/_pages/ko_KR/region-changing.txt b/_pages/ko_KR/region-changing.txt
index 6aa0a0fddc..1aebefbb47 100644
--- a/_pages/ko_KR/region-changing.txt
+++ b/_pages/ko_KR/region-changing.txt
@@ -6,11 +6,15 @@ title: "지역 변경"
### 중요
-이 페이지는 CFW SysNAND의 지역을 변경하는 방법을 안내하는 부가 섹션입니다. 이 작업은 바꾸고자 하는 지역의 11.15.0 CTRTransfer 이미지를 설치합니다. 이미지 설치 후, 장치를 최신 펌웨어 버전(11.16.0)으로 업데이트할 수 있습니다.
+This is an add-on section for region changing your device. 이 작업은 바꾸고자 하는 지역의 11.15.0 CTRTransfer 이미지를 설치합니다. 이미지 설치 후, 장치를 최신 펌웨어 버전(11.16.0)으로 업데이트할 수 있습니다.
-Luma3DS가 지역 외 게임들과 [타이틀별 지역 에뮬레이션](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)을 지원하기 때문에, 지역 변경은 거의 불필요하다는 점을 참고해 주시기 바랍니다. 또한, 다른 지역의 NDS게임을 실행하는 것 또한 [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases)에 의해 지원됩니다.
+Luma3DS가 지역 외 게임들과 [타이틀별 지역 에뮬레이션](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)을 지원하기 때문에, 지역 변경은 거의 불필요하다는 점을 참고해 주시기 바랍니다. 또한, 다른 지역의 NDS게임을 실행하는 것 또한 [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases)에 의해 지원됩니다. You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-만약 여러분의 SD 카드의 `/luma/payloads/` 폴더에 `GodMode9.firm` 외의 페이로드 파일이 있다면, (Start)를 누르면서 부팅할 시에 화면에 표시되는 "chainloader menu" 에서 십자 패드와 (A) 버튼으로 조작하여 "GodMode9"을 선택하여야 합니다.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
기기의 지역을 바꾸게 된다면:
@@ -18,21 +22,16 @@ Luma3DS가 지역 외 게임들과 [타이틀별 지역 에뮬레이션](https:/
+ (만약 있다면) Nintendo 네트워크 ID를 이용할 수 없게 됩니다. NNID들은 작성된 지역에서만 사용할 수 있습니다.
+ 이전에 [eShop 계정을 지우더라도 (영어)](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account), eShop에 접속하지 못할 수 있습니다. 몇몇 타이틀들은, 계정 삭제 후도 3DS 링크를 유지하려는 경향이 있어서입니다 (특히 New 3DS에서).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. 업데이트들은 보통 온라인 플레이를 할 시 필요합니다.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **기기를 벽돌로 하는 것을 감수하지 않고선 커스텀 펌웨어를 지울 수 없습니다!** 만약 미래에 커스텀 펌웨어를 지우려고 생각한다면, **절대로** 지역 변경을 하기 전의 NAND 백업을 복원하고 나서 해야 합니다.
{% endcapture %}
{{ notice-6 | markdownify }}
-이것은 Luma3DS 및 boot9strap가 이미 설치되어 있어야 가능합니다.
-{: .notice--danger}
-
-구형 3DS/2DS 기기에서는 지역 변경 후, 추가 메모리 모드 개임을 (예: 대난투 스매시브라더스, 포켓몬스터 썬/문, 몬스터 헌터)를 사용할 수 없게 될 수 있습니다. 만약 이게 발생한다면, 이 문제를 고치기 위해 (TinyFormat 및 본체 설정을 이용해서) 기기를 포맷하셔야 합니다.
-{: .notice--warning}
-
### 준비물
-이 페이지의 [마그넷](https://wikipedia.org/wiki/Magnet_URI_scheme)링크를 사용하려면
- [qBittorrent](https://www.qbittorrent.org/download.php) 또는 [Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* 최신 버전의 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (`.zip` 파일)
@@ -73,15 +72,11 @@ Luma3DS가 지역 외 게임들과 [타이틀별 지역 에뮬레이션](https:/
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### 섹션 VI - 지역 설정
+#### Section VI - Deleting system save data
-1. 본체 설정을 실행해 주세요
-1. "기타 설정", "유저 정보"및 "지역 정보"로 이동해 주세요
-1. 변경한 지역에 속한 국가를 선택해 주세요
-1. 메시지가 뜨더라도 '도'까지 설정할 필요는 없습니다
-
-#### 섹션 VII - CTRTransfer 이미지 제거
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/ko_KR/seedminer-(twn).txt b/_pages/ko_KR/seedminer-(twn).txt
index 5821a2fbc0..d21cdeaaf3 100644
--- a/_pages/ko_KR/seedminer-(twn).txt
+++ b/_pages/ko_KR/seedminer-(twn).txt
@@ -1,5 +1,5 @@
---
-title: "Seedminer (TWN)"
+title: "Seedminer (타이완)"
---
{% include toc title="목차" %}
@@ -8,9 +8,9 @@ title: "Seedminer (TWN)"
___
-### Next step: BannerBomb3
+### 다음 단계: BannerBomb3
-Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+기기의 암호화 키 (`movable.sed`)를 구한 후, 이것을 BannerBomb3와 함깨 사용하여, 시스템 설정 앱에 존재하는 익스플로잇을 사용할 것 입니다.
-Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn))
+[BannerBomb3 + Fredtool (타이완)](bannerbomb3-fredtool-(twn))으로 계속합니다
{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ko_KR/seedminer.txt b/_pages/ko_KR/seedminer.txt
index 3db8ee4072..97577284cd 100644
--- a/_pages/ko_KR/seedminer.txt
+++ b/_pages/ko_KR/seedminer.txt
@@ -8,9 +8,9 @@ title: "Seedminer"
___
-### Next step: BannerBomb3
+### 다음 단계: BannerBomb3
-Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+기기의 암호화 키 (`movable.sed`)를 구한 후, 이것을 BannerBomb3와 함깨 사용하여, 시스템 설정 앱에 존재하는 익스플로잇을 사용할 것 입니다.
[BannerBomb3](bannerbomb3) 으로 계속합니다
{: .notice--primary}
diff --git a/_pages/ko_KR/site-navigation.txt b/_pages/ko_KR/site-navigation.txt
index 1259009a3c..a317b0e7c7 100644
--- a/_pages/ko_KR/site-navigation.txt
+++ b/_pages/ko_KR/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [CFW 확인](checking-for-cfw)
+ [기여하기](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [타이틀과 게임 카드 추출](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 사용법](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [홈](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [boot9strap 설치 (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [boot9strap 설치 (하드모드)](installing-boot9strap-(hardmod))
+ [boot9strap 설치 (HBL-USM)](installing-boot9strap-(hbl-usm))
* [boot9strap 설치 (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [boot9strap 설치 (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [boot9strap 설치 (Soundhax)](installing-boot9strap-(soundhax))
+ [boot9strap 설치 (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [boot9strap 설치 (USM)](installing-boot9strap-(usm))
diff --git a/_pages/ko_KR/troubleshooting.txt b/_pages/ko_KR/troubleshooting.txt
index 8e88adc6ef..ab1682f4d4 100644
--- a/_pages/ko_KR/troubleshooting.txt
+++ b/_pages/ko_KR/troubleshooting.txt
@@ -17,6 +17,7 @@ title: "문제 해결"
* [boot9strap 설치 (Fredtool)](#installing-boot9strap-fredtool)
* [boot9strap 설치 (Soundhax)](#installing-boot9strap-soundhax)
* [boot9strap 설치 (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [마무리 단계](#finalizing-setup)
@@ -420,6 +421,31 @@ If these methods didn't work (or do not apply to you), update your device to the
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+이미 커스텀 펌웨어가 설치되어 있을 수 있습니다. [CFW 확인](checking-for-cfw) 을 하는 것을 권장합니다.
+
+{% endcapture %}
+{{ compat | markdownify }}
## 마무리 단계
diff --git a/_pages/ms_MY/bannerbomb3.txt b/_pages/ms_MY/bannerbomb3.txt
index 6cbe70d305..9dcd74f3fc 100644
--- a/_pages/ms_MY/bannerbomb3.txt
+++ b/_pages/ms_MY/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/ms_MY/ctrtransfer.txt b/_pages/ms_MY/ctrtransfer.txt
index 9bd44e7bd9..62584106f6 100644
--- a/_pages/ms_MY/ctrtransfer.txt
+++ b/_pages/ms_MY/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/ms_MY/dumping-movable-(nimhax).txt b/_pages/ms_MY/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..5fbfa0f9c7
--- /dev/null
+++ b/_pages/ms_MY/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Pasang kad SD anda ke dalam komputer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/ms_MY/finalizing-setup.txt b/_pages/ms_MY/finalizing-setup.txt
index 9c3c81a60d..6986c33d72 100644
--- a/_pages/ms_MY/finalizing-setup.txt
+++ b/_pages/ms_MY/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/ms_MY/get-started.txt b/_pages/ms_MY/get-started.txt
index 6b86afa5d6..fd65fe67fa 100644
--- a/_pages/ms_MY/get-started.txt
+++ b/_pages/ms_MY/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/ms_MY/homebrew-launcher-(super-skaterhax).txt b/_pages/ms_MY/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..96474eaed6
--- /dev/null
+++ b/_pages/ms_MY/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Pasang kad SD anda ke dalam komputer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Tekan (A) untuk meneruskan
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/ms_MY/include/addproxy.txt b/_pages/ms_MY/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/ms_MY/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/ms_MY/include/ctrnand-datayeet.txt b/_pages/ms_MY/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..588212c918
--- /dev/null
+++ b/_pages/ms_MY/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Tekan (A) untuk pengesahan
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Tekan (A) untuk meneruskan
+1. While still highlighting `00010017`, press (X) to delete it
+1. Tekan (A) untuk pengesahan
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/ms_MY/include/exploit-usm.txt b/_pages/ms_MY/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/ms_MY/include/exploit-usm.txt
+++ b/_pages/ms_MY/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/ms_MY/include/rmproxy.txt b/_pages/ms_MY/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/ms_MY/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/ms_MY/include/safemodecheck.txt b/_pages/ms_MY/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/ms_MY/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/ms_MY/include/sysupdate.txt b/_pages/ms_MY/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/ms_MY/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/ms_MY/installing-boot9strap-(frogtool).txt b/_pages/ms_MY/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..b5dec5dd49
--- /dev/null
+++ b/_pages/ms_MY/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Pasang kad SD anda ke dalam komputer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt b/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt b/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/ms_MY/installing-boot9strap-(safecerthax).txt b/_pages/ms_MY/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..fb6d36c704
--- /dev/null
+++ b/_pages/ms_MY/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Pasang kad SD anda ke dalam komputer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ms_MY/installing-boot9strap-(ssloth-browser).txt b/_pages/ms_MY/installing-boot9strap-(ssloth-browser).txt
index 24531d6b8c..e9fe68811d 100644
--- a/_pages/ms_MY/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/ms_MY/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/ms_MY/installing-boot9strap-(usm).txt b/_pages/ms_MY/installing-boot9strap-(usm).txt
index 87a5512973..c02f478e80 100644
--- a/_pages/ms_MY/installing-boot9strap-(usm).txt
+++ b/_pages/ms_MY/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/ms_MY/region-changing.txt b/_pages/ms_MY/region-changing.txt
index 9523a78d2b..4f06d68f8d 100644
--- a/_pages/ms_MY/region-changing.txt
+++ b/_pages/ms_MY/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Pergi ke "Other Settings", "Profile", kemudian "Region Settings"
-1. Pilih negara dari kawasan yang anda tukarkan
-1. Jika ditanya, anda tidak perlu melakukan bahagian negeri
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/ms_MY/site-navigation.txt b/_pages/ms_MY/site-navigation.txt
index fd5f4de7dd..c54bdee07a 100644
--- a/_pages/ms_MY/site-navigation.txt
+++ b/_pages/ms_MY/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/ms_MY/troubleshooting.txt b/_pages/ms_MY/troubleshooting.txt
index 2bd9e2ef3f..e8dda10a3a 100644
--- a/_pages/ms_MY/troubleshooting.txt
+++ b/_pages/ms_MY/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/nl_NL/bannerbomb3.txt b/_pages/nl_NL/bannerbomb3.txt
index 15086fde03..7aa502c394 100644
--- a/_pages/nl_NL/bannerbomb3.txt
+++ b/_pages/nl_NL/bannerbomb3.txt
@@ -26,7 +26,7 @@ Als je een Taiwanese console hebt (aangegeven door een T na de systeemversie), v
### Wat je nodig hebt
-* Je `movable.sed` bestand van het voltooien van [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Deel I - Voorbereiding
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/nl_NL/ctrtransfer.txt b/_pages/nl_NL/ctrtransfer.txt
index 659361c2e2..95ab27f3d1 100644
--- a/_pages/nl_NL/ctrtransfer.txt
+++ b/_pages/nl_NL/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
Dit is een extra gedeelte voor het installeren van een 11.15.0 CTRTransfer image op je apparaat.
-Merk op dat als je andere payload bestanden dan `GodMode9.firm` in de `/luma/payloads/` map op je SD-kaart hebt, je bij het ingedrukt houden van (Start) bij het opstarten een "chainloader menu" opent die je kan navigeren met de D-Pad en met de (A) knop "GodMode9" kaHin selecteren. Dit geld voor al deze instructies.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-Je MOET Luma3ds en boot9strap al geïnstalleerd hebben om dit te kunnen gebruiken.
-{: .notice--danger}
-
-Het uitvoeren van een CTRTransfer kan de extended memory mode voor spellen (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) op Old 3DS/2DS apparaten breken. Als dit gebeurt, moet je het apparaat formatteren (met behulp van TinyFormat of Systeeminstellingen) om het probleem op te lossen.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### Wat je nodig hebt
-Om de [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links op deze pagina te kunnen gebruiken, heb je een torrent client zoals [qBittorrent](https://www.qbittorrent.org/download.php) of [Deluge](http://dev.deluge-torrent.org/wiki/Download) nodig.
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* De nieuwste versie van [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (het GodMode9 `.zip` bestand)
@@ -55,9 +53,9 @@ Om de [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links op deze pagin
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Deel V - Verwijder CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/nl_NL/dumping-movable-(nimhax).txt b/_pages/nl_NL/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..89776d2a29
--- /dev/null
+++ b/_pages/nl_NL/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Inhoudsopgave" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Wat je nodig hebt
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructies
+
+#### Deel I - Voorbereiding
+
+1. Schakel je 3DS uit
+1. Plaats je SD kaart in je computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Stop je SD kaart terug in je 3DS
+1. Zet je 3DS aan
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/nl_NL/finalizing-setup.txt b/_pages/nl_NL/finalizing-setup.txt
index 273e614f6e..279e5d410e 100644
--- a/_pages/nl_NL/finalizing-setup.txt
+++ b/_pages/nl_NL/finalizing-setup.txt
@@ -31,7 +31,7 @@ Als je vorige CFW setup was gebaseerd op EmuNAND en je wilt de inhoud van je Emu
### Wat je nodig hebt
* De nieuwste versie van [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (het `.cia` bestand)
-* De v3.7.4 release van [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (het `.cia` bestand)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* De nieuwste versie van [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (het `.cia` bestand)
* De nieuwste versie van [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (het `.cia` bestand)
* De nieuwste versie van [FBI](https://github.com/Steveice10/FBI/releases/latest) (download zowel de `.3dsx` als de `.cia` bestanden)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update je 3DS door naar System Settings en dan naar "Algemene Instellingen" te gaan. Ga in dat menu helemaal naar rechts en klik op "Systeemupdate"
- + Updaten terwijl je gebruik maakt van B9S + Luma (wat jij hebt) is veilig
- + De updater kan een bericht weergeven met de woorden "Your system is up to date" in plaats van te updaten. Dit is normaal als je al up to date bent; ga door met het volgende deel
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Deel III - Homebrew Launcher
diff --git a/_pages/nl_NL/get-started.txt b/_pages/nl_NL/get-started.txt
index b1ef212ee2..9d14970892 100644
--- a/_pages/nl_NL/get-started.txt
+++ b/_pages/nl_NL/get-started.txt
@@ -25,6 +25,10 @@ Als je een ongebruikelijk menu ziet, STOP - je hebt al custom firmware! Ga verde
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternatieve methoden
diff --git a/_pages/nl_NL/homebrew-launcher-(super-skaterhax).txt b/_pages/nl_NL/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..c1e2ac8eda
--- /dev/null
+++ b/_pages/nl_NL/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Inhoudsopgave" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### Wat je nodig hebt
+
+* De nieuwste versie van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (het Luma3DS `.zip` bestand)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Deel II - Voorbereiding
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Schakel je 3DS uit
+1. Plaats je SD kaart in je computer
+1. Kopieer `boot.firm` en `boot.3dsx` van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart
+ + De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Stop je SD kaart terug in je 3DS
+1. Zet je 3DS aan
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Druk op (A) om door te gaan
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Schakel je 3DS uit
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/nl_NL/include/addproxy.txt b/_pages/nl_NL/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/nl_NL/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/nl_NL/include/ctrnand-datayeet.txt b/_pages/nl_NL/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..6532ca43fa
--- /dev/null
+++ b/_pages/nl_NL/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Schakel je 3DS uit
+1. Terwijl je (Start) ingedrukt houdt, zet je jouw apparaat aan. Dit zal GodMode9 starten
+1. Navigeer naar `[0:] SDCARD`-> `gm9`
+1. Druk op (X) om de CTRTransfer image `.bin` te verwijderen
+1. Druk op (A) om het te bevestigen
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Selecteer "Copy to 0:/gm9/out"
+1. Druk op (A) om door te gaan
+1. While still highlighting `00010017`, press (X) to delete it
+1. Druk op (A) om het te bevestigen
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Druk op (A) om schrijfrechten te vergrendelen als dit gevraagd wordt
+1. Druk op (Start) om je 3DS opnieuw op te starten
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/nl_NL/include/exploit-usm.txt b/_pages/nl_NL/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/nl_NL/include/exploit-usm.txt
+++ b/_pages/nl_NL/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/nl_NL/include/rmproxy.txt b/_pages/nl_NL/include/rmproxy.txt
new file mode 100644
index 0000000000..ae235a346b
--- /dev/null
+++ b/_pages/nl_NL/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Schakel je 3DS uit
diff --git a/_pages/nl_NL/include/safemodecheck.txt b/_pages/nl_NL/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/nl_NL/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/nl_NL/include/sysupdate.txt b/_pages/nl_NL/include/sysupdate.txt
new file mode 100644
index 0000000000..ca6237ed66
--- /dev/null
+++ b/_pages/nl_NL/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update je 3DS door naar System Settings en dan naar "Algemene Instellingen" te gaan. Ga in dat menu helemaal naar rechts en klik op "Systeemupdate"
+{%- if include.cfw == "true" %}
+ + Updaten terwijl je gebruik maakt van B9S + Luma (wat jij hebt) is veilig
+{%- endif %}
+ + De updater kan een bericht weergeven met de woorden "Your system is up to date" in plaats van te updaten. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/nl_NL/installing-boot9strap-(frogtool).txt b/_pages/nl_NL/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..b2c288babf
--- /dev/null
+++ b/_pages/nl_NL/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Inhoudsopgave" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### Wat je nodig hebt
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Deel I - CFW Controle
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Deel II - Voorbereiding
+
+1. Schakel je 3DS uit
+1. Plaats je SD kaart in je computer
+1. Kopieer `boot.firm` en `boot.3dsx` van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Stop je SD kaart terug in je 3DS
+1. Zet je 3DS aan
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. Als de exploit successful was, zal jouw 3DS de JPN versie van Flipnote Studio hebben opgestart
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Open de Download Play app
+1. Wacht tot je de twee knoppen ziet
+ + Do not press either of the buttons
+1. Druk tegelijkertijd op (L) + (Down) + (Select) om het Rosalina menu te openen
+1. Selecteer "Miscellaneous options"
+1. Selecteer "Switch the hb. title to the current app."
+1. Druk op (B) om door te gaan
+1. Druk op (B) om terug te gaan naar het Rosalina hoofdmenu
+1. Druk op (B) om het Rosalina menu af te sluiten
+1. Druk op (Home), en sluit dan Download Play af
+1. Relaunch the Download Play application
+1. Nu zou je console de Homebrew Launcher moeten openen
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Schakel je 3DS uit
+
+___
+
+### Doorgaan naar [Installatie voltooien](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt b/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt
index 10b4280cc3..b7d5a73a32 100644
--- a/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Zet je 3DS aan
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Deel III - Boot9strap installeren
diff --git a/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt b/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt
index dd9b33d0af..2f05f4415f 100644
--- a/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ Om deze instructies te volgen, heb je het volgende nodig:
- Een fysieke of digitale kopie van Mario Kart 7 dat dezelfde regio heeft als beide consoles
- Een SD-kaart voor beide apparaten
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### Wat je nodig hebt
Op de **source 3DS** (de 3DS met custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* De nieuwste versie van [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
Op de **target 3DS** (de 3DS die je probeert te wijzigen):
@@ -47,7 +44,14 @@ Op de **target 3DS** (de 3DS die je probeert te wijzigen):
* De nieuwste versie van [standaard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Deel I - Voorbereiding (bron 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Maak de `plugins` en `00040000...` mappen aan als ze nog niet bestaan
1. Haal de SD-kaart uit en stop deze in de **bron 3DS**
-#### Deel II - Voorbereiding (doel 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Haal de SD-kaart uit en stop deze in de **doel 3DS**
-#### Deel III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/nl_NL/installing-boot9strap-(safecerthax).txt b/_pages/nl_NL/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..34a017b261
--- /dev/null
+++ b/_pages/nl_NL/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Inhoudsopgave" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### Wat je nodig hebt
+
+* De nieuwste versie van [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (directe download)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (directe download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructies
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Deel II - Voorbereiding
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Plaats je SD kaart in je computer
+1. Kopieer `boot.firm` en `boot.3dsx` van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart
+ + De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
+1. Maak een map genaamd `boot9strap` op de hoofdmap van je SD-kaart
+1. Kopieer `boot9strap.firm` en `boot9strap.firm.sha` van de boot9strap `.zip` naar de `/boot9strap/` map op je SD-kaart
+1. Kopieer `SafeB9SInstaller.bin` van de SafeB9SInstaller `.zip` naar de hoofdmap van je SD-kaart
+1. Stop je SD kaart terug in je 3DS
+1. Zet je 3DS aan
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Schakel je 3DS uit
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Doorgaan naar [Installatie voltooien](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/nl_NL/installing-boot9strap-(ssloth-browser).txt b/_pages/nl_NL/installing-boot9strap-(ssloth-browser).txt
index d652ebdacf..47cd2129ae 100644
--- a/_pages/nl_NL/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/nl_NL/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Schakel je 3DS uit
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/nl_NL/installing-boot9strap-(usm).txt b/_pages/nl_NL/installing-boot9strap-(usm).txt
index 948181a9b1..798b2c6fc7 100644
--- a/_pages/nl_NL/installing-boot9strap-(usm).txt
+++ b/_pages/nl_NL/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Deel III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Deel IV - Boot9strap installeren
@@ -83,7 +83,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
In this section, you will trigger the BannerBomb3 exploit a second time so that you can restore the Wi-Fi connection slots that were overwritten in Section II.
-1. Open Systeeminstellingen op je apparaat
+1. Open System Settings op je apparaat
1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
1. Use the D-Pad to navigate and press the (A) button to select "Uninstall unSAFE_MODE"
+ Your device will automatically reboot
diff --git a/_pages/nl_NL/region-changing.txt b/_pages/nl_NL/region-changing.txt
index ecafae3950..ae38b45a60 100644
--- a/_pages/nl_NL/region-changing.txt
+++ b/_pages/nl_NL/region-changing.txt
@@ -6,11 +6,15 @@ title: "Regio veranderen"
### Verplicht te lezen
-Dit is een extra gedeelte om de regio te veranderen van je CFW SysNAND. Dit wordt gedaan door het installeren van de 11.15.0 CTRTransfer image voor de regio waarnaar je wilt overschakelen. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. Dit wordt gedaan door het installeren van de 11.15.0 CTRTransfer image voor de regio waarnaar je wilt overschakelen. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Merk wel op dat je regio veranderen bijna altijd compleet onnodig zal zijn omdat Luma3DS ook spellen uit een andere regio kan spelen, en ook individuele [Lokale emulatie](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Daarnaast worden ook NDS spellen uit andere regio's ondersteund door [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Merk wel op dat je regio veranderen bijna altijd compleet onnodig zal zijn omdat Luma3DS ook spellen uit een andere regio kan spelen, en ook individuele [Lokale emulatie](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Daarnaast worden ook NDS spellen uit andere regio's ondersteund door [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Merk op dat als je andere payload bestanden dan `GodMode9.firm` in de `/luma/payloads/` map op je SD-kaart hebt, je bij het ingedrukt houden van (Start) bij het opstarten een "chainloader menu" opent die je kan navigeren met de D-Pad en met de (A) knop "GodMode9" kaHin selecteren. Dit geld voor al deze instructies.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
Als je de regio van je apparaat verandert:
@@ -18,20 +22,16 @@ Als je de regio van je apparaat verandert:
+ Je zult je NNID niet kunnen gebruiken (als je er een hebt). NNID's zijn vergrendeld aan de regio waarin ze gemaakt zijn.
+ Je hebt mogelijk geen toegang tot de eShop, zelfs niet als je [je eShop account verwijdert](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-account) vooraf. Dit komt doordat bepaalde titels vaak gekoppeld blijven aan de 3DS, zelfs na het verwijderen van de account (met name op New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates zijn meestal vereist om online te spelen.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **Je kunt custom firmware niet verwijderen zonder het apparaat te bricken! * Als je custom firmware wilt deïnstalleren in de toekomst, zul je je NAND backup herstellen die gemaakt was voordat je de regio veranderde.
{% endcapture %}
{{ notice-6 | markdownify }}
-Je MOET Luma3ds en boot9strap al geïnstalleerd hebben om dit te kunnen gebruiken.
-{: .notice--danger}
-
-Het uitvoeren van een regio verandering kan de extended memory mode voor spellen (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) op Old 3DS/2DS apparaten breken. Als dit gebeurt, moet je het apparaat formatteren (met behulp van TinyFormat of Systeeminstellingen) om het probleem op te lossen.
-{: .notice--warning}
-
### Wat je nodig hebt
-Om de [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links op deze pagina te kunnen gebruiken, heb je een torrent client zoals [qBittorrent](https://www.qbittorrent.org/download.php) of [Deluge](http://dev.deluge-torrent.org/wiki/Download) nodig.
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* De nieuwste versie van [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (het GodMode9 `.zip` bestand)
@@ -72,15 +72,11 @@ Om de [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links op deze pagin
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Deel VI - Regio instellingen
+#### Section VI - Deleting system save data
-1. Open Systeem Instellingen
-1. Ga naar "Andere Instellingen", "Profiel" en daarna "Regio Instellingen"
-1. Selecteer een land van de regio waar je je apparaat naar hebt veranderd
-1. Als er om gevraagd wordt hoef je niet een staat te selecteren
-
-#### Deel VII - Verwijder de CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/nl_NL/site-navigation.txt b/_pages/nl_NL/site-navigation.txt
index 280c709470..788c06ce1a 100644
--- a/_pages/nl_NL/site-navigation.txt
+++ b/_pages/nl_NL/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Controleren op CFW](checking-for-cfw)
+ [Bijdragen](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Titels en game cartridges dumpen](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 gebruik](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Boot9strap installeren (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Boot9strap installeren (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Boot9strap installeren (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Boot9strap installeren (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Boot9strap installeren (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Boot9strap installeren (USM)](installing-boot9strap-(usm))
diff --git a/_pages/nl_NL/troubleshooting.txt b/_pages/nl_NL/troubleshooting.txt
index 5e9c602f0d..0aa5257c2c 100644
--- a/_pages/nl_NL/troubleshooting.txt
+++ b/_pages/nl_NL/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ Mocht dit niet lukken, gebruik dan een andere SD-kaart.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. Je zou best [controleren op CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Installatie voltooien
diff --git a/_pages/no_NO/bannerbomb3.txt b/_pages/no_NO/bannerbomb3.txt
index 00ac09a910..a48bfd605d 100644
--- a/_pages/no_NO/bannerbomb3.txt
+++ b/_pages/no_NO/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/no_NO/ctrtransfer.txt b/_pages/no_NO/ctrtransfer.txt
index 77739b3a68..b006bdb0f4 100644
--- a/_pages/no_NO/ctrtransfer.txt
+++ b/_pages/no_NO/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/no_NO/dumping-movable-(nimhax).txt b/_pages/no_NO/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..c48259f7da
--- /dev/null
+++ b/_pages/no_NO/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Slå av enheten
+1. Sett inn SD-kortet i datamaskinen din
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Sett inn SD-kortet i konsollen igjen
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/no_NO/finalizing-setup.txt b/_pages/no_NO/finalizing-setup.txt
index 67b1d48fd2..cfb5209440 100644
--- a/_pages/no_NO/finalizing-setup.txt
+++ b/_pages/no_NO/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Oppdater konsollen ved å gå til Systeminnstillinger, deretter "Other Settings", så helt til høyre og start "System Update"
- + Oppdateringer mens du bruker B9S + Luma (det du har) er trygt
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/no_NO/get-started.txt b/_pages/no_NO/get-started.txt
index 3573b4f483..d539820c5d 100644
--- a/_pages/no_NO/get-started.txt
+++ b/_pages/no_NO/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/no_NO/homebrew-launcher-(super-skaterhax).txt b/_pages/no_NO/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..77b1a6362f
--- /dev/null
+++ b/_pages/no_NO/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Slå av enheten
+1. Sett inn SD-kortet i datamaskinen din
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Sett inn SD-kortet i konsollen igjen
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Trykk (A) for å fortsette
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Slå av enheten
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/no_NO/include/addproxy.txt b/_pages/no_NO/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/no_NO/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/no_NO/include/ctrnand-datayeet.txt b/_pages/no_NO/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..9f9521eedf
--- /dev/null
+++ b/_pages/no_NO/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Slå av enheten
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Trykk (A) på CTRTransfer bilde `.bin` for å slette den
+1. Trykk (A) for å bekrefte
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Trykk (A) for å fortsette
+1. While still highlighting `00010017`, press (X) to delete it
+1. Trykk (A) for å bekrefte
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Trykk (Start) å restarte enheten
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/no_NO/include/exploit-usm.txt b/_pages/no_NO/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/no_NO/include/exploit-usm.txt
+++ b/_pages/no_NO/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/no_NO/include/rmproxy.txt b/_pages/no_NO/include/rmproxy.txt
new file mode 100644
index 0000000000..7eeb3127a5
--- /dev/null
+++ b/_pages/no_NO/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Slå av enheten
diff --git a/_pages/no_NO/include/safemodecheck.txt b/_pages/no_NO/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/no_NO/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/no_NO/include/sysupdate.txt b/_pages/no_NO/include/sysupdate.txt
new file mode 100644
index 0000000000..e9c26ff24e
--- /dev/null
+++ b/_pages/no_NO/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Oppdater konsollen ved å gå til Systeminnstillinger, deretter "Other Settings", så helt til høyre og start "System Update"
+{%- if include.cfw == "true" %}
+ + Oppdateringer mens du bruker B9S + Luma (det du har) er trygt
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/no_NO/installing-boot9strap-(frogtool).txt b/_pages/no_NO/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..35105b9ea8
--- /dev/null
+++ b/_pages/no_NO/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Slå av enheten
+1. Sett inn SD-kortet i datamaskinen din
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Sett inn SD-kortet i konsollen igjen
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Slå av enheten
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/no_NO/installing-boot9strap-(hbl-usm).txt b/_pages/no_NO/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/no_NO/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/no_NO/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/no_NO/installing-boot9strap-(kartdlphax).txt b/_pages/no_NO/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/no_NO/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/no_NO/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/no_NO/installing-boot9strap-(safecerthax).txt b/_pages/no_NO/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..5e25e617f3
--- /dev/null
+++ b/_pages/no_NO/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Sett inn SD-kortet i datamaskinen din
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Sett inn SD-kortet i konsollen igjen
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Slå av enheten
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/no_NO/installing-boot9strap-(ssloth-browser).txt b/_pages/no_NO/installing-boot9strap-(ssloth-browser).txt
index be390b93f1..2b1fdf5fe9 100644
--- a/_pages/no_NO/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/no_NO/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Slå av enheten
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/no_NO/installing-boot9strap-(usm).txt b/_pages/no_NO/installing-boot9strap-(usm).txt
index f85bd4131b..f52a421884 100644
--- a/_pages/no_NO/installing-boot9strap-(usm).txt
+++ b/_pages/no_NO/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/no_NO/region-changing.txt b/_pages/no_NO/region-changing.txt
index ed46d621ca..413fdb3c10 100644
--- a/_pages/no_NO/region-changing.txt
+++ b/_pages/no_NO/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Gå til "Other Settings", "Profile", og deretter "Region Settings"
-1. Velg et land fra den regionen du byttet til
-1. Hvis du bir spurt, er det ikke nødvendig å angi stat
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/no_NO/site-navigation.txt b/_pages/no_NO/site-navigation.txt
index fb144b6bdf..f3e30e0a54 100644
--- a/_pages/no_NO/site-navigation.txt
+++ b/_pages/no_NO/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Hjem](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/no_NO/troubleshooting.txt b/_pages/no_NO/troubleshooting.txt
index 31101b8077..883c7352b2 100644
--- a/_pages/no_NO/troubleshooting.txt
+++ b/_pages/no_NO/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/pl_PL/bannerbomb3.txt b/_pages/pl_PL/bannerbomb3.txt
index 18d45f57ef..af7c096b99 100644
--- a/_pages/pl_PL/bannerbomb3.txt
+++ b/_pages/pl_PL/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### Czego Potrzebujesz
-* Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Sekcja I - Przygotowanie
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/pl_PL/ctrtransfer.txt b/_pages/pl_PL/ctrtransfer.txt
index a1bf393d82..5d52f078c5 100644
--- a/_pages/pl_PL/ctrtransfer.txt
+++ b/_pages/pl_PL/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Zauważ, że jeżeli będziesz miał pliki inne niż `GodMode9.firm` w folderze `/luma/payloads/` na karcie SD, przytrzymanie (Start), podczas uruchamiania spowoduje wyświetlenie "chainloader menu" w którym będziesz musiał użyć D-Pad'a oraz przycisku (A) aby wybrać "GodMode9" dla tego poradnika.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-MUSISZ mieć już zainstalowany Luma3DS i boot9strap żeby to wykonać.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### Czego Potrzebujesz
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Sekcja V - Usuwanie Obrazu CTRTransfer
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/pl_PL/dumping-movable-(nimhax).txt b/_pages/pl_PL/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..e3de73a29b
--- /dev/null
+++ b/_pages/pl_PL/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Spis Treści" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Czego Potrzebujesz
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instrukcje
+
+#### Sekcja I - Przygotowanie
+
+1. Wyłącz konsolę
+1. Włóż kartę SD do komputera
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Włóż kartę SD do konsoli
+1. Włącz konsolę
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/pl_PL/finalizing-setup.txt b/_pages/pl_PL/finalizing-setup.txt
index facc159e2c..726818b5bd 100644
--- a/_pages/pl_PL/finalizing-setup.txt
+++ b/_pages/pl_PL/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### Czego Potrzebujesz
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Zaktualizuj swoją konsolę wchodząc w System Settings i "Other Settings". Następnie przejedź na sam koniec w prawo i użyj "System Update"
- + Aktualizacje podczas używania B9S + Luma (tego co masz) są bezpieczne
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Sekcja III - Homebrew Launcher
@@ -128,7 +124,7 @@ In this section, you will use a script to copy some of Luma3DS's files to intern
In this section, you will use a script to remove some unnecessary files from your SD card.
1. Wybierz "Cleanup SD Card"
-1. Gdy zostaniesz poproszony, naciśnij (A) by kontynuować
+1. Kiedy zostaniesz poproszony, naciśnij (A) aby kontynuować
1. Naciśnij (A), aby kontynuować
1. Wciśnij (B) aby wrócić do menu głównego
diff --git a/_pages/pl_PL/get-started.txt b/_pages/pl_PL/get-started.txt
index efe104bf31..e9421bcc1a 100644
--- a/_pages/pl_PL/get-started.txt
+++ b/_pages/pl_PL/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/pl_PL/homebrew-launcher-(super-skaterhax).txt b/_pages/pl_PL/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..a5e1c27e93
--- /dev/null
+++ b/_pages/pl_PL/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Spis Treści" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### Czego Potrzebujesz
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Sekcja II - Przygotowanie
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Wyłącz konsolę
+1. Włóż kartę SD do komputera
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Włóż kartę SD do konsoli
+1. Włącz konsolę
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Naciśnij (A), aby kontynuować
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Wyłącz konsolę
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/pl_PL/include/addproxy.txt b/_pages/pl_PL/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/pl_PL/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/pl_PL/include/ctrnand-datayeet.txt b/_pages/pl_PL/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..d415d9fd65
--- /dev/null
+++ b/_pages/pl_PL/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Wyłącz konsolę
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Przejdź do `[0:] SDCARD` -> `gm9`
+1. Wciśnij (X) na pliku obrazu CTRTransfer `.bin`, aby go usunąć
+1. Naciśnij (A) by potwierdzić
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Wybierz "Copy to 0:/gm9/out"
+1. Naciśnij (A), aby kontynuować
+1. While still highlighting `00010017`, press (X) to delete it
+1. Naciśnij (A) by potwierdzić
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Naciśnij (A), aby ponownie zablokować uprawnienia do zapisu, jeśli zostaniesz o to poproszony
+1. Wciśnij (Start), aby zrestartować konsolę
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/pl_PL/include/exploit-usm.txt b/_pages/pl_PL/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/pl_PL/include/exploit-usm.txt
+++ b/_pages/pl_PL/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/pl_PL/include/rmproxy.txt b/_pages/pl_PL/include/rmproxy.txt
new file mode 100644
index 0000000000..3c51772be7
--- /dev/null
+++ b/_pages/pl_PL/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Wyłącz konsolę
diff --git a/_pages/pl_PL/include/safemodecheck.txt b/_pages/pl_PL/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/pl_PL/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/pl_PL/include/sysupdate.txt b/_pages/pl_PL/include/sysupdate.txt
new file mode 100644
index 0000000000..7f73d4cf7f
--- /dev/null
+++ b/_pages/pl_PL/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Zaktualizuj swoją konsolę wchodząc w System Settings i "Other Settings". Następnie przejedź na sam koniec w prawo i użyj "System Update"
+{%- if include.cfw == "true" %}
+ + Aktualizacje podczas używania B9S + Luma (tego co masz) są bezpieczne
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/pl_PL/installing-boot9strap-(frogtool).txt b/_pages/pl_PL/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..c12e9e5032
--- /dev/null
+++ b/_pages/pl_PL/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Spis Treści" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### Czego Potrzebujesz
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Sekcja II - Przygotowanie
+
+1. Wyłącz konsolę
+1. Włóż kartę SD do komputera
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Włóż kartę SD do konsoli
+1. Włącz konsolę
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. Jeżeli exploit zadziałał, na urządzeniu uruchomi się Japońska wersja Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Uruchom aplikację Download Play
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Wybierz "Miscellaneous options"
+1. Wybierz "Switch the hb. title to the current app."
+1. Naciśnij (B) aby kontynuować
+1. Naciśnij (B) aby powrócić do głównego menu Rosalina
+1. Naciśnij (B) aby zamknąć menu Rosalina
+1. Naciśnij (Home), a następnie zamknij aplikację Download Play
+1. Relaunch the Download Play application
+1. Twoja konsola powinna załadować Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Wyłącz konsolę
+
+___
+
+### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt b/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt
index 7a3bc02d46..da13ac4222 100644
--- a/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Włącz konsolę
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Sekcja III - Instalacja boot9strap
diff --git a/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt b/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt
index 007fd92a9f..d4c3fd1920 100644
--- a/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### Czego Potrzebujesz
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/pl_PL/installing-boot9strap-(safecerthax).txt b/_pages/pl_PL/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..4b59087faa
--- /dev/null
+++ b/_pages/pl_PL/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Spis Treści" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### Czego Potrzebujesz
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instrukcje
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Sekcja II - Przygotowanie
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Włóż kartę SD do komputera
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Stwórz folder o nazwie `boot9strap` w katalogu głównym karty SD
+1. Skopiuj `boot9strap.firm` i `boot9strap.firm.sha` z boot9strap `.zip` do folderu `/boot9strap/` na karcie SD
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Włóż kartę SD do konsoli
+1. Włącz konsolę
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Wyłącz konsolę
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. Jeśli operacja zakończyła się pomyślnie, uruchomi się SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pl_PL/installing-boot9strap-(ssloth-browser).txt b/_pages/pl_PL/installing-boot9strap-(ssloth-browser).txt
index bf49f1fbbf..13766fbc31 100644
--- a/_pages/pl_PL/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/pl_PL/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Wyłącz konsolę
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/pl_PL/installing-boot9strap-(usm).txt b/_pages/pl_PL/installing-boot9strap-(usm).txt
index f5d3e6e349..b58594bc06 100644
--- a/_pages/pl_PL/installing-boot9strap-(usm).txt
+++ b/_pages/pl_PL/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/pl_PL/region-changing.txt b/_pages/pl_PL/region-changing.txt
index 0b68ccc6be..a7a2efe445 100644
--- a/_pages/pl_PL/region-changing.txt
+++ b/_pages/pl_PL/region-changing.txt
@@ -6,11 +6,15 @@ title: "Zmiana Regionu Konsoli"
### Wymagana Lektura
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Zauważ, że jeżeli będziesz miał pliki inne niż `GodMode9.firm` w folderze `/luma/payloads/` na karcie SD, przytrzymanie (Start), podczas uruchamiania spowoduje wyświetlenie "chainloader menu" w którym będziesz musiał użyć D-Pad'a oraz przycisku (A) aby wybrać "GodMode9" dla tego poradnika.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,27 +22,23 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-MUSISZ mieć już zainstalowany Luma3DS i boot9strap żeby to wykonać.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### Czego Potrzebujesz
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
* Najnowszej wersji [FBI](https://github.com/Steveice10/FBI/releases/latest) *(pliku `.3dsx`)*
* The 11.15.0 CTRTransfer image for your device type of the region that you want to change to (e.g. Download "New 3DS or 2DS - USA" if you have a New 3DS and want to change your region to USA)
+ - [New 3DS or 2DS - 11.15.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:2a39586a0a10d1f0a9470b082ef1453e502b2425&xt=urn:btmh:12205090f0a43a956bd7449658ee0580949d15ae112c80007fb2ef42e3265b6c5f6c&dn=11.15.0-47E_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
- + - [New 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:986b454cab2d9f27daa63d4291f61aed039871d2&xt=urn:btmh:1220c8c96bd76b6fef041aada9ce4e3cf06ef141f3c4558310b9c3a00e39bccc43a1&dn=11.15.0-47J_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ + - [New 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:986b454cab2d9f27daa63d4291f61aed039871d2&xt=urn:btmh:1220c8c96bd76b6fef041aada9ce4e3cf06ef141f3c4558310b9c3a00e39bccc43a1&dn=11.15.0-47J_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [New 3DS or 2DS - 11.15.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:e247b21e1f81f76acf6d3140da45da858e76f1f6&xt=urn:btmh:122008168a003666c14783998d1dd82ac02d1b3be902efa75cf5a03ee47da1fecd73&dn=11.15.0-41K_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [New 3DS or 2DS - 11.15.0 - USA - CTRTransfer](magnet:?xt=urn:btih:8ae25de1ab01c9304eece9785d5db6cdd6728214&xt=urn:btmh:1220ab284cc822f3170305723e9920e1bb4d7649fdf528c3ea04aada31e09bfbbe57&dn=11.15.0-47U_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
~
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Włącz "System Settings"
-1. Przejdź do "Other Settings", "Profile", a następnie, "Region Settings"
-1. Wybierz kraj z regionu na który zmieniłeś swoją konsolę
-1. Nie musisz ustawiać stanu, kiedy zostaniesz o niego zapytany
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/pl_PL/site-navigation.txt b/_pages/pl_PL/site-navigation.txt
index a4e28181a8..5ea05609ee 100644
--- a/_pages/pl_PL/site-navigation.txt
+++ b/_pages/pl_PL/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [Używanie GodMode9](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Strona główna](/pl_PL)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Instalacja boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Instalacja boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Instalacja boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Instalacja boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/pl_PL/troubleshooting.txt b/_pages/pl_PL/troubleshooting.txt
index 1186eef72b..0eed47c4cd 100644
--- a/_pages/pl_PL/troubleshooting.txt
+++ b/_pages/pl_PL/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/pt_BR/bannerbomb3.txt b/_pages/pt_BR/bannerbomb3.txt
index b10b6c0ca8..fe12726301 100644
--- a/_pages/pt_BR/bannerbomb3.txt
+++ b/_pages/pt_BR/bannerbomb3.txt
@@ -26,7 +26,7 @@ Se você tiver um console tailandês (indicado por um T após a versão do siste
### O que você precisa
-Seu arquivo 'movable.sed' baixado ao completar o processo [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Seção I - Preparação
@@ -58,11 +58,7 @@ Nesta seção, você irá copiar os arquivos necessários para ativar o exploit
Nesta seção, você verá se você pode acessar o Modo de Segurança no seu dispositivo. Isso determinará qual método você seguirá na próxima página.
-1. Com o seu dispositivo ainda desligado, segure os seguintes botões: (Gatilho Esquerdo) + (Gatilho Direito) + (Botão Direcional para Cima) + (A), e enquanto segura esses botões juntos, ligue seu dispositivo
- + Continue segurando os botões até que o dispositivo inicie a tela de atualização do sistema (este é o Modo de Segurança)
-1. Se você ver a tela de atualização do sistema, pressione Cancelar
- + Seu dispositivo será desligado
- + Caso o dispositivo inicie no Menu HOME, basta desligar seu dispositivo
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/pt_BR/ctrtransfer.txt b/_pages/pt_BR/ctrtransfer.txt
index 300f1b8c91..03aca655ca 100644
--- a/_pages/pt_BR/ctrtransfer.txt
+++ b/_pages/pt_BR/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
Essa é uma sessão extra para instalar uma imagem CTRTransfer 11.15.0 em seu dispositivo.
-Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` na pasta `/luma/payloads/` do seu cartão SD, segure (Start) durante a inicialização para exibir um "menu de chainloader" onde você terá que utilizar os botões direcionais e o botão (A) para selecionar "GodMode9" para estas instruções.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-Você já DEVE ter instalado Luma3DS e boot9strap para usar isto.
-{: .notice--danger}
-
-Fazer um CTRTransfer pode quebrar alguns jogos de memória estendida (Monster Hunter, Super Smash Bros, Pokémon Sun/Moon, etc.) nos dispositivos Old 3DS/2DS. Se isso acontecer, você vai precisar formatar o dispositivo (usando TinyFormat ou na Configuração do Console) para consertar o erro.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### O que você precisa
-Para utilizar os [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links dessa página, você precisará de um cliente torrent como [qBittorrent](https://www.qbittorrent.org/download.php) ou [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* A versão mais recente do [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (o arquivo `.zip`)
@@ -55,9 +53,9 @@ Para utilizar os [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links de
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Seção V - Remover a imagem CTRTransfer
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/pt_BR/dumping-movable-(nimhax).txt b/_pages/pt_BR/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..b9a38575bc
--- /dev/null
+++ b/_pages/pt_BR/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Tabela de Conteúdo" %}
+
+{% capture technical_info %}
+Detalhes técnicos (opcional)
+
+Para instalar boot9strap em seu dispositivo, nós derivamos a chave de criptografia exclusiva do seu dispositivo. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### O que é necessário
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instruções
+
+#### Seção I - Preparação
+
+1. Desligue seu dispositivo
+1. Insira o cartão SD no seu computador
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsira seu cartão SD no seu dispositivo
+1. Ligue o seu dispositivo
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue em [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/pt_BR/finalizing-setup.txt b/_pages/pt_BR/finalizing-setup.txt
index 13b054a203..3eaf534794 100644
--- a/_pages/pt_BR/finalizing-setup.txt
+++ b/_pages/pt_BR/finalizing-setup.txt
@@ -31,7 +31,7 @@ Se a sua instalação do CFW anterior era baseada em EmuNAND e você deseja move
### O que você precisa
* A versão mais recente do [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(o arquivo `.cia`)*
-* A versão 3.7.4 do [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) *(o arquivo `.cia`)*
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* A versão mais recente do [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
* A versão mais recente do [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(o arquivo `.cia`)*
* A versão mais recente do [FBI](https://github.com/Steveice10/FBI/releases/latest) *(os arquivos `.cia` e `.3dsx`)*
@@ -70,11 +70,7 @@ As capturas de tela abaixo indicam o layout mínimo do cartão SD que é necess
Nesta seção, você atualizará seu sistema para a versão mais recente, que é seguro de fazer com custom firmware.
-1. Atualize seu dispositivo indo em Configuração do console, depois "Outras Configurações, depois indo para a direita até o final e selecionando "Atualização"
- + Atualizações feitas enquanto usa B9S + Luma (o que você tem) são seguras
- + O atualizador pode exibir uma mensagem dizendo "Seu sistema está atualizado" ao invés de atualizar. Isso é normal se você já está atualizado; continue com a próxima seção
- + Se isso lhe der um erro, defina suas configurações de DNS e configurações de Proxy para "auto"
- + Se isso ainda lhe der um erro, [siga este guia de troubleshooting](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Seção III - Homebrew Launcher
diff --git a/_pages/pt_BR/get-started.txt b/_pages/pt_BR/get-started.txt
index 72c11c3a46..d2118086e6 100644
--- a/_pages/pt_BR/get-started.txt
+++ b/_pages/pt_BR/get-started.txt
@@ -25,6 +25,10 @@ Se você ver um menu incomum, PARE - você já tem custom firmware! Continue [da
Para encontrar o método correto para o seu dispositivo, por favor digite a versão do sistema que encontrou na Seção II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
Esta não parece ser uma versão válida de sistema.
{% endcapture %}
@@ -33,7 +37,7 @@ Esta não parece ser uma versão válida de sistema.
Você atualmente não pode hackear seu 3DS nesta versão usando os métodos principais. Se você quiser hackear o seu console, você terá que usar ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Métodos alternativos
diff --git a/_pages/pt_BR/homebrew-launcher-(super-skaterhax).txt b/_pages/pt_BR/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..05ec1c0adf
--- /dev/null
+++ b/_pages/pt_BR/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Tabela de Conteúdo" %}
+
+{% capture technical_info %}
+Detalhes técnicos (opcional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Notas de Compatibilidade
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### O que é necessário
+
+* A versão mais recente do [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (o arquivo `.zip` do Luma3DS)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+### Seção II - Preparação
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Desligue seu dispositivo
+1. Insira o cartão SD no seu computador
+1. Copie `boot.firm` e `boot.3dsx` do `.zip` do Luma3DS para a raiz do seu cartão SD
+ + A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsira seu cartão SD no seu dispositivo
+1. Ligue o seu dispositivo
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + Se você receber um aviso de certificado de segurança, aperte (A) para permitir a conexão
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Aperte (A) para continuar
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Desligue seu dispositivo
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+Se você viu a tela de atualização do sistema na seção anterior, o Modo de Segurança está funcionando em seu dispositivo.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/pt_BR/include/addproxy.txt b/_pages/pt_BR/include/addproxy.txt
new file mode 100644
index 0000000000..aba4e34e6c
--- /dev/null
+++ b/_pages/pt_BR/include/addproxy.txt
@@ -0,0 +1,12 @@
+Se você ainda não tem, certifique-se de que você tem uma conexão de Internet ativa configurada em seu console.
+{: .notice--info}
+
+1. Saia do aplicativo Configuração do Console
+1. Navegue para `Configurações da Internet` -> `Configurações de Conexão`
+1. Clique no seu slot de conexão da rede e navegue para `Alterar configurações` -> `Próxima página (seta direita)` -> `Configurações de proxy`
+1. Defina "Configurações do proxy" como "Sim" e, em seguida, clique em `Configuração Detalhada`
+1. Defina o Servidor Proxy para `192.9.234.11`, e a Porta para `8080`
+1. Clique em OK, e depois clique em Salvar
+1. Quando solicitado, clique em "Testar" para executar o teste de conexão
+ + O teste deve ser bem-sucedido
+1. Clique em "OK" para continuar
diff --git a/_pages/pt_BR/include/ctrnand-datayeet.txt b/_pages/pt_BR/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..6562dd79e5
--- /dev/null
+++ b/_pages/pt_BR/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Desligue seu dispositivo
+1. Pressione e segure (Start), e enquanto segura (Start), ligue seu dispositivo. Isso vai inicializar o GodMode9
+1. Navegue para `[0:] SDCARD` -> `gm9`
+1. Aperte (X) na imagem `.bin` da CTRTransfer para apagá-la
+1. Aperte (A) para confirmar
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Selecione "Copy to 0:/gm9/out''
+1. Aperte (A) para continuar
+1. While still highlighting `00010017`, press (X) to delete it
+1. Aperte (A) para confirmar
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Se solicitado, aperte (A) para bloquear as permissões de escrita
+1. Aperte (Start) para reiniciar seu dispositivo
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/pt_BR/include/exploit-usm.txt b/_pages/pt_BR/include/exploit-usm.txt
index 6c0e280104..661538d9ed 100644
--- a/_pages/pt_BR/include/exploit-usm.txt
+++ b/_pages/pt_BR/include/exploit-usm.txt
@@ -2,11 +2,6 @@ Nesta seção, você entrará no Modo de Segurança (uma funcionalidade disponí
1. Com o seu dispositivo ainda desligado, segure os seguintes botões: (Gatilho Esquerdo) + (Gatilho Direito) + (Botão Direcional para Cima) + (A), e enquanto segura esses botões juntos, ligue seu dispositivo
+ Continue segurando os botões até o dispositivo iniciar o Safe Mode (um menu de "atualização do sistema")
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + Caso não consiga entrar no Modo de Segurança após várias tentativas, um de seus botões pode estar falhando ou quebrado. Se for esse o caso, junte-se ao [Discord do Nintendo Homebrew](https://discord.gg/MWxPgEp) e peça ajuda, em Inglês.
-{%- elsif include.method == "bb3" %}
- + Caso não consiga entrar no Modo de Segurança após várias tentativas, um de seus botões pode estar falhando ou quebrado. Se for esse o caso, você precisará seguir [um ramo alternativo de BannerBomb3](installing-boot9strap-(fredtool)). Para obter ajuda com isso, entre no [Discord do Nintendo Homebrew](https://discord.gg/MWxPgEp) e peça, em inglês, por ajuda.
-{%- endif %}
1. Pressione "OK" para aceitar a atualização
+ Não há atualização. Isto faz parte do exploit
1. Pressione "Eu aceito" para aceitar os termos e condições
@@ -14,3 +9,5 @@ Nesta seção, você entrará no Modo de Segurança (uma funcionalidade disponí
1. Quando solicitado "Você gostaria de configurar as configurações de Internet?", selecione "Sim"
1. No menu a seguir, navegue até `Conexão 1` -> `Alterar configurações` -> `Próxima página (seta direita)` -> `Configurações do proxy` -> `Configuração Avançada`[imagem](/images/screenshots/usm/safemode_highlighted.png))
1. Se o exploit for bem sucedido, seu dispositivo será inicializado no SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/pt_BR/include/rmproxy.txt b/_pages/pt_BR/include/rmproxy.txt
new file mode 100644
index 0000000000..66ec239d49
--- /dev/null
+++ b/_pages/pt_BR/include/rmproxy.txt
@@ -0,0 +1,10 @@
+Nesta seção, você irá restaurar as configurações de internet ao normal.
+
+1. Saia do aplicativo Configuração do Console
+1. Navegue para `Configurações da Internet` -> `Configurações de Conexão`
+1. Clique no seu slot de conexão da rede e navegue para `Alterar configurações` -> `Próxima página (seta direita)` -> `Configurações de proxy`
+1. Defina "Configurações de proxy" para "Não"
+1. Clique em OK, e depois clique em Salvar
+1. Quando solicitado, clique em "Testar" para executar o teste de conexão
+ + O teste deve ser bem-sucedido
+1. Desligue seu dispositivo
diff --git a/_pages/pt_BR/include/safemodecheck.txt b/_pages/pt_BR/include/safemodecheck.txt
new file mode 100644
index 0000000000..5b4398f9c4
--- /dev/null
+++ b/_pages/pt_BR/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. Com o seu dispositivo ainda desligado, segure os seguintes botões: (Gatilho Esquerdo) + (Gatilho Direito) + (Botão Direcional para Cima) + (A), e enquanto segura esses botões juntos, ligue seu dispositivo
+ + Continue segurando os botões até que o dispositivo inicie a tela de atualização do sistema (este é o Modo de Segurança)
+1. Se você ver a tela de atualização do sistema, pressione Cancelar
+ + Seu dispositivo será desligado
+ + Caso o dispositivo inicie no Menu HOME, basta desligar seu dispositivo
diff --git a/_pages/pt_BR/include/sysupdate.txt b/_pages/pt_BR/include/sysupdate.txt
new file mode 100644
index 0000000000..0c553431c2
--- /dev/null
+++ b/_pages/pt_BR/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Atualize seu dispositivo indo em Configuração do console, depois "Outras Configurações, depois indo para a direita até o final e selecionando "Atualização"
+{%- if include.cfw == "true" %}
+ + Atualizações feitas enquanto usa B9S + Luma (o que você tem) são seguras
+{%- endif %}
+ + O atualizador pode exibir uma mensagem dizendo "Seu sistema está atualizado" ao invés de atualizar. Isso é normal se você já está atualizado; continue para a próxima seção
+ + Se isso lhe der um erro, defina suas configurações de DNS e configurações de Proxy para "Automático"
+{%- if include.cfw == "true" %}
+ + Se isso ainda lhe der um erro, [siga este guia de troubleshooting](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/pt_BR/installing-boot9strap-(frogtool).txt b/_pages/pt_BR/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..0b2443746b
--- /dev/null
+++ b/_pages/pt_BR/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Tabela de Conteúdo" %}
+
+{% capture technical_info %}
+Detalhes técnicos (opcional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### O que é necessário
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Seção I - Checando por CFW
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+### Seção II - Preparação
+
+1. Desligue seu dispositivo
+1. Insira o cartão SD no seu computador
+1. Copie `boot.firm` e `boot.3dsx` do `.zip` do Luma3DS para a raiz do seu cartão SD
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsira seu cartão SD no seu dispositivo
+1. Ligue o seu dispositivo
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. Se o exploit foi bem sucedido, seu dispositivo irá abrir a versão JPN do Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Seção VI - Configuração do Luma3DS
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Seção VII - Restaurando as Configurações de Conexão DS
+
+1. Inicie o aplicativo Download Play
+1. Aguarde até que você veja os dois botões
+ + Não pressione nenhum dos botões
+1. Aperte (Gatilho Esquerdo) + (D-pad pra baixo) + (Select) ao mesmo tempo para abrir o menu Rosalina
+1. Selecione "Miscellaneous options"
+1. Selecione "Switch the hb. title to the current app."
+1. Aperte (B) para continuar
+1. Aperte (B) para retornar para o menu principal do Rosalina
+1. Aperte (B) para sair do menu do Rosalina
+1. Aperte (Home), depois feche o Download Play
+1. Reinicie o aplicativo Download Play
+1. Seu dispositivo deve abrir o Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Desligue seu dispositivo
+
+___
+
+### Continue para [Finalizando a instalação](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt b/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt
index 8c31612477..23068ab68d 100644
--- a/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ Se os seus botões (Gatilho Direito/Esquerdo), (D-Pad pra Cima) ou (A) não func
Nesta seção, você usará o Homebrew Launcher para iniciar o slotTool, o que substituirá seus slots de Wi-Fi por dados modificados. Em seguida, você copiará os arquivos necessários para acionar o exploit unSAFE_MODE no cartão SD do seu dispositivo. Suas configurações de conexão Wi-Fi serão temporariamente sobrescritas enquanto o exploit estiver ativo.
-1. Seu console deve estar ligado e mostrando o Homebrew Launcher da parte anterior do guia
- + Se não, ligue o seu console e entre no Homebrew Launcher através de seu método de escolha (provavelmente Pokémon Picross)
+1. Ligue o seu dispositivo
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Abra o slotTool da lista de homebrew
+ Se você ficar preso numa tela vermelha, force o desligamento do console, segurando o botão liga/desliga por quinze segundos, e tente novamente esta seção
1. Selecione a opção "INSTALL exploit to wifi slots 1,2,3 & shutdown"
@@ -56,7 +56,7 @@ Nesta seção, você usará o Homebrew Launcher para iniciar o slotTool, o que s
#### Seção II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Seção III - Instalando o boot9strap
diff --git a/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt b/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt
index f4ba79a835..acbf969c5b 100644
--- a/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ Para poder seguir estas instruções, você precisará do seguinte:
- Uma cópia física ou digital de Mario Kart 7 que é a mesma região de ambos os consoles
- Um cartão SD para ambos os dispositivos
-Se os botões (Gatilho Esquerdo/Direito), (Botão Direcional para Cima), ou (A) no **3DS de destino** não funcionar, você não poderá seguir essas instruções. Para assistência adicional com este assunto, junte-se ao [Discord do Nintendo Homebrew](https://discord.gg/MWxPgEp) e peça ajuda, em Inglês.
-{: .notice--warning}
-
### O que é necessário
No **3DS de origem** (o 3DS com custom firmware):
* A versão mais recente do [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* A versão mais recente do [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
No **3DS de destino** (o 3DS que você está tentando modificar):
@@ -47,7 +44,14 @@ No **3DS de destino** (o 3DS que você está tentando modificar):
* A versão mais recente do [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (o arquivo `.zip` do Luma3DS)
* A versão mais recente do [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (o arquivo RELEASE `.zip`)
-#### Seção I - Preparação (3DS de origem)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. Se for esse o caso, junte-se ao [Discord do Nintendo Homebrew](https://discord.gg/MWxPgEp) e peça ajuda, em Inglês.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
Nesta seção, você irá configurar seu 3DS de origem (o 3DS com custom firmware) para a entrega dos dados do exploit ao 3DS de destino.
@@ -61,7 +65,7 @@ Nesta seção, você irá configurar seu 3DS de origem (o 3DS com custom firmwar
- Crie as pastas `plugins` e `00040000...` se elas já não existirem
1. Ejete o cartão SD e coloque-o no **3DS de origem**
-#### Seção II - Preparação (3DS de destino)
+#### Section III - Prep Work (target 3DS)
Nesta seção, você copiará os arquivos necessários para acionar o exploit unSAFE_MODE no 3DS de destino (o 3DS que está tentando modificar) no cartão SD.
@@ -75,7 +79,7 @@ Nesta seção, você copiará os arquivos necessários para acionar o exploit un
1. Copie a pasta `slotTool` do `.zip` unSAFE_MODE para a pasta `3ds` no seu cartão SD
1. Ejete o cartão SD e coloque-o no **3DS de destino**
-#### Seção III - kartdlphax
+#### Section IV - kartdlphax
Nesta seção, você usará o Download Play para transferir os dados do exploit do 3DS de origem para o 3DS de destino, que pode ser usado para substituir seus slots de Wi-Fi por dados com hack. Suas configurações de conexão Wi-Fi serão temporariamente sobrescritas enquanto o exploit estiver ativo.
@@ -111,18 +115,18 @@ Nesta seção, você usará o Download Play para transferir os dados do exploit
Você **não** precisará usar seu **3DS de origem** para completar quaisquer etapas deste guia a partir de agora. Quaisquer outras etapas só devem ser feitas no **3DS de destino**.
{: .notice--info}
-#### Seção IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Seção V - Instalando boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Seção VI - Restaurando os Perfis de Configuração de Wi-Fi
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/pt_BR/installing-boot9strap-(safecerthax).txt b/_pages/pt_BR/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..2ed261239a
--- /dev/null
+++ b/_pages/pt_BR/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Tabela de Conteúdo" %}
+
+{% capture technical_info %}
+Detalhes técnicos (opcional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Notas de Compatibilidade
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### O que é necessário
+
+* A versão mais recente do [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (download direto)
+* A versão mais recente do [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (download direto)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instruções
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+### Seção II - Preparação
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insira o cartão SD no seu computador
+1. Copie `boot.firm` e `boot.3dsx` do `.zip` do Luma3DS para a raiz do seu cartão SD
+ + A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
+1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD
+1. Copie o `boot9strap.firm` e o `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD
+1. Copie `SafeB9SInstaller.bin` do `.zip` do SafeB9SInstaller para a raiz do seu cartão SD
+1. Reinsira seu cartão SD no seu dispositivo
+1. Ligue o seu dispositivo
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Desligue seu dispositivo
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. Com o seu dispositivo ainda desligado, segure os seguintes botões: (Gatilho Esquerdo) + (Gatilho Direito) + (Botão Direcional para Cima) + (A), e enquanto segura esses botões juntos, ligue seu dispositivo
+ + Continue segurando os botões até o dispositivo iniciar o Safe Mode (um menu de "atualização do sistema")
+1. Pressione "OK" para aceitar a atualização
+ + Não há atualização. Isto faz parte do exploit
+1. Pressione "Eu aceito" para aceitar os termos e condições
+1. A atualização eventualmente falhará, com o código de erro `003-1099`. Isto é intencional
+1. Press "OK" to close the error message
+1. Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Seção V - Instalando boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue para [Finalizando a instalação](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt b/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt
index 406d9b03b1..82e97eb57c 100644
--- a/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ Nesta seção, você irá copiar os arquivos necessários para acionar ambos bro
Nesta seção, você vai alterar suas configurações de conexão Internet para usar uma rede proxy criada para ignorar a verificação da versão do navegador, permitindo que o navegador funcione sem uma atualização do sistema. Isso permitirá que você acesse a página de exploit do navegador na próxima seção.
-Se você ainda não tem, certifique-se de que você tem uma conexão de Internet ativa configurada em seu console.
-{: .notice--info}
-
-1. Saia do aplicativo Configuração do Console
-1. Navegue para `Configurações da Internet` -> `Configurações de Conexão`
-1. Clique no seu slot de conexão da rede e navegue para `Alterar configurações` -> `Próxima página (seta direita)` -> `Configurações de proxy`
-1. Defina "Configurações do proxy" como "Sim" e, em seguida, clique em `Configuração Detalhada`
-1. Defina o Servidor Proxy para `192.9.234.11`, e a Porta para `8080`
-1. Clique em OK, e depois clique em Salvar
-1. Quando solicitado, clique em "Testar" para executar o teste de conexão
- + O teste deve ser bem-sucedido
-1. Clique em "OK" para continuar
+{% include_relative include/addproxy.txt %}
1. Pressione "Voltar" duas vezes e, em seguida, "Fechar" para voltar ao Menu HOME
#### Seção III - Iniciando o SafeB9SInstaller
Nesta seção, você vai visitar a página de exploit do navegador, que usará ouniversal-otherapp para iniciar o instalador boot9strap (custom firmware).
-1. No Menu HOME, pressione o gatilho Esquerdo e Direito juntos para abrir a câmera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ Se você não conseguir abrir a câmera, abra o Navegador de Internet e digite manualmente a URL (`https://zoogie.github.io/web/nbhax/`)
1. Toque no botão do código QR e escaneie [este código QR](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ Se você receber um erro, [siga este guia de troubleshooting](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ Nesta seção, você vai visitar a página de exploit do navegador, que usará o
#### Seção V - Restaurando o proxy padrão
-Nesta seção, você irá restaurar as configurações de internet ao normal.
-
-1. Saia do aplicativo Configuração do Console
-1. Navegue para `Configurações da Internet` -> `Configurações de Conexão`
-1. Clique no seu slot de conexão da rede e navegue para `Alterar configurações` -> `Próxima página (seta direita)` -> `Configurações de proxy`
-1. Defina "Configurações de proxy" para "Não"
-1. Clique em OK, e depois clique em Salvar
-1. Quando solicitado, clique em "Testar" para executar o teste de conexão
- + O teste deve ser bem-sucedido
-1. Desligue seu dispositivo
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/pt_BR/installing-boot9strap-(usm).txt b/_pages/pt_BR/installing-boot9strap-(usm).txt
index 00f9420f19..b06b4f836b 100644
--- a/_pages/pt_BR/installing-boot9strap-(usm).txt
+++ b/_pages/pt_BR/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ Nesta seção, você irá acionar o exploit BannerBomb3 usando o menu de Gerenci
#### Seção III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Seção IV - Instalando o boot9strap
diff --git a/_pages/pt_BR/region-changing.txt b/_pages/pt_BR/region-changing.txt
index 7deb8f2736..5ac21188a7 100644
--- a/_pages/pt_BR/region-changing.txt
+++ b/_pages/pt_BR/region-changing.txt
@@ -6,12 +6,16 @@ title: "Mudança de Região"
### Leitura Obrigatória
-Esta é uma seção adicional para mudar a região da sua SysNAND com CFW. Isto é feito através da instalação da imagem CTRTransfer 11.15.0 da região para qual você deseja trocar. Após instalar a imagem, você pode atualizar seu dispositivo normalmente para o firmware mais recente (11.16.0).
+This is an add-on section for region changing your device. Isto é feito através da instalação da imagem CTRTransfer 11.15.0 da região para qual você deseja trocar. Após instalar a imagem, você pode atualizar seu dispositivo normalmente para o firmware mais recente (11.16.0).
Note que a mudança de região é quase completamente desnecessária uma vez que o Luma3DS suporta jogos de outras regiões e aplicativos inidividuais através de [Locale Emulation]
-(https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Além, disso, rodar jogos do Nintendo DS com idiomas de outras regiões é possível através do [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+(https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Além, disso, rodar jogos do Nintendo DS com idiomas de outras regiões é possível através do [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` na pasta `/luma/payloads/` do seu cartão SD, segure (Start) durante a inicialização para exibir um "menu de chainloader" onde você terá que utilizar os botões direcionais e o botão (A) para selecionar "GodMode9" para estas instruções.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
Se você mudar a região do seu dispositivo:
@@ -19,20 +23,16 @@ Se você mudar a região do seu dispositivo:
+ Você não será capaz de usar seu NNID (se tiver um). Os NNIDs são fixados para a região na qual foram criados.
+ Você não poderá acessar a eShop, mesmo que você [exclua sua conta da eShop](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) previamente. Isso é porque certos aplicativos tendem a permanecer ligados ao 3DS, mesmo após a exclusão da conta (especialmente no New 3DS).
+ Enquanto compras não podem mais ser feitas no eShop, atualizações de jogos ainda podem ser baixadas. As atualizações são geralmente necessárias para jogar online.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **Você não poderá desinstalar custom firmware sem causar um brick no dispositivo!** Se deseja desinstalar custom firmware no futuro, você **DEVE** restaurar o seu backup da NAND que foi criado antes de alterar a região.
{% endcapture %}
{{ notice-6 | markdownify }}
-Você já DEVE ter instalado Luma3DS e boot9strap para usar isto.
-{: .notice--danger}
-
-Executar uma alteração de região pode quebrar jogos do modo de memória estendida (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) em dispositivos Old 3DS/2DS. Se isso acontecer, você vai precisar formatar o dispositivo (usando TinyFormat ou na Configuração do Console) para consertar o erro.
-{: .notice--warning}
-
### O que você precisa
-Para utilizar os [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links dessa página, você precisará de um cliente torrent como [qBittorrent (https://www.qbittorrent.org/download.php) ou [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* A versão mais recente do [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (o arquivo `.zip`)
@@ -73,15 +73,11 @@ Para utilizar os [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links de
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Seção VI - Configurações de região
+#### Section VI - Deleting system save data
-1. Inicie a Configuração do console
-1. Vá para "Outras Configurações", "Perfil", depois "Região"
-1. Selecione um país da região para qual você trocou
-1. Se solicitado, você não precisa definir um estado
-
-#### Seção VII - Removendo a imagem CTRTransfer
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/pt_BR/site-navigation.txt b/_pages/pt_BR/site-navigation.txt
index 97e27cdb8f..ca0b18fd78 100644
--- a/_pages/pt_BR/site-navigation.txt
+++ b/_pages/pt_BR/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checando por CFW](checking-for-cfw)
+ [Contribuir](contribuir)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Fazendo Dump de Aplicativos e Jogos de Cartucho](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [Uso do GodMode9](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/pt_BR/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Instalando boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Instalando boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Instalando boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Instalando boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Instalando boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Instalando boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Instalando boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Instalando boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/pt_BR/troubleshooting.txt b/_pages/pt_BR/troubleshooting.txt
index 17e902fe8d..a1ea66953f 100644
--- a/_pages/pt_BR/troubleshooting.txt
+++ b/_pages/pt_BR/troubleshooting.txt
@@ -17,6 +17,7 @@ Páginas do guia:
* [Instalando boot9strap (Fredtool)](#instalando-boot9strap-fredtool)
* [Instalando boot9strap (Soundhax)](#instalando-boot9strap-soundhax)
* [Instalando boot9strap (SSLoth-Browser)](#instalando-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizando a instalação](#finalizando-a-instalação)
@@ -420,6 +421,31 @@ Se isso falhar, tente usar outro cartão SD.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+Isso provavelmente indica que você já possui custom firmware. Você deve [checar por CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizando a instalação
@@ -550,7 +576,7 @@ Há uma série de razões para que isto possa estar acontecendo. Em qualquer cas
"Ocorreu um erro. Segure o botão POWER para desligar..."
Os ARM11 exception handlers estão desabilitados, ou custom firmware não está instalado. Tente habilitar os ARM11 exception handlers:
- + Desligue o seu dispositivo
+ + Desligue seu dispositivo
+ Segure (Select)
+ Ligue seu dispositivo enquanto segura o botão (Select)
+ Se a caixa "Disable ARM11 exception handlers" estiver marcada, desmarque a opção
diff --git a/_pages/pt_PT/bannerbomb3.txt b/_pages/pt_PT/bannerbomb3.txt
index 5a11fffeff..0bf8e2d4a0 100644
--- a/_pages/pt_PT/bannerbomb3.txt
+++ b/_pages/pt_PT/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/pt_PT/ctrtransfer.txt b/_pages/pt_PT/ctrtransfer.txt
index ded3b63e3f..ac6905780d 100644
--- a/_pages/pt_PT/ctrtransfer.txt
+++ b/_pages/pt_PT/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/pt_PT/dumping-movable-(nimhax).txt b/_pages/pt_PT/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..1621a85165
--- /dev/null
+++ b/_pages/pt_PT/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/pt_PT/finalizing-setup.txt b/_pages/pt_PT/finalizing-setup.txt
index 7bfa6e768b..de901dedd6 100644
--- a/_pages/pt_PT/finalizing-setup.txt
+++ b/_pages/pt_PT/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/pt_PT/get-started.txt b/_pages/pt_PT/get-started.txt
index 6b86afa5d6..fd65fe67fa 100644
--- a/_pages/pt_PT/get-started.txt
+++ b/_pages/pt_PT/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/pt_PT/homebrew-launcher-(super-skaterhax).txt b/_pages/pt_PT/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..6f4daef090
--- /dev/null
+++ b/_pages/pt_PT/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/pt_PT/include/addproxy.txt b/_pages/pt_PT/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/pt_PT/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/pt_PT/include/ctrnand-datayeet.txt b/_pages/pt_PT/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..6749b1d1bc
--- /dev/null
+++ b/_pages/pt_PT/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/pt_PT/include/exploit-usm.txt b/_pages/pt_PT/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/pt_PT/include/exploit-usm.txt
+++ b/_pages/pt_PT/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/pt_PT/include/rmproxy.txt b/_pages/pt_PT/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/pt_PT/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/pt_PT/include/safemodecheck.txt b/_pages/pt_PT/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/pt_PT/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/pt_PT/include/sysupdate.txt b/_pages/pt_PT/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/pt_PT/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/pt_PT/installing-boot9strap-(frogtool).txt b/_pages/pt_PT/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ddfc6a7304
--- /dev/null
+++ b/_pages/pt_PT/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt b/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt b/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/pt_PT/installing-boot9strap-(safecerthax).txt b/_pages/pt_PT/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..075e190486
--- /dev/null
+++ b/_pages/pt_PT/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pt_PT/installing-boot9strap-(ssloth-browser).txt b/_pages/pt_PT/installing-boot9strap-(ssloth-browser).txt
index bfd7771226..e5beafbea0 100644
--- a/_pages/pt_PT/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/pt_PT/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/pt_PT/installing-boot9strap-(usm).txt b/_pages/pt_PT/installing-boot9strap-(usm).txt
index 6f9a1eb70c..4e326ff6d3 100644
--- a/_pages/pt_PT/installing-boot9strap-(usm).txt
+++ b/_pages/pt_PT/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/pt_PT/region-changing.txt b/_pages/pt_PT/region-changing.txt
index 51d17b53c0..8ea5d6830e 100644
--- a/_pages/pt_PT/region-changing.txt
+++ b/_pages/pt_PT/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Leitura Obrigatória
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Vai a "Outras Definições, "Perfil", depois a "Definições de Região"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/pt_PT/site-navigation.txt b/_pages/pt_PT/site-navigation.txt
index 18e9713650..fdc7937a91 100644
--- a/_pages/pt_PT/site-navigation.txt
+++ b/_pages/pt_PT/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/pt_PT/troubleshooting.txt b/_pages/pt_PT/troubleshooting.txt
index c8f2789ae4..4f46f113bb 100644
--- a/_pages/pt_PT/troubleshooting.txt
+++ b/_pages/pt_PT/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/ro_RO/bannerbomb3.txt b/_pages/ro_RO/bannerbomb3.txt
index b9d49744bd..2e657464b0 100644
--- a/_pages/ro_RO/bannerbomb3.txt
+++ b/_pages/ro_RO/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### Ce aveți nevoie
-* Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Secțiunea I - Preparații
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/ro_RO/ctrtransfer.txt b/_pages/ro_RO/ctrtransfer.txt
index 85541c65ee..b33568f553 100644
--- a/_pages/ro_RO/ctrtransfer.txt
+++ b/_pages/ro_RO/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-TREBUIE să aveți deja instalat Luma3DS şi boot9strap pentru a-l folosi.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### Ce aveți nevoie
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Secțiunea V - Eliminarea imaginii CTRTransfer
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/ro_RO/dumping-movable-(nimhax).txt b/_pages/ro_RO/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..ccf7ab075c
--- /dev/null
+++ b/_pages/ro_RO/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Cuprins" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Ce aveți nevoie
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instrucțiuni
+
+#### Secțiunea I - Preparații
+
+1. Închideți dispozitivul
+1. Introduceți cardul SD în calculator
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reintroduceți cardul SD în dispozitivul dumneavoastră
+1. Porniți dispozitivul
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/ro_RO/finalizing-setup.txt b/_pages/ro_RO/finalizing-setup.txt
index 4b23691e42..3ffaeae06d 100644
--- a/_pages/ro_RO/finalizing-setup.txt
+++ b/_pages/ro_RO/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### Ce aveți nevoie
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Actualizați dispozitivul mergând în System Settings, apoi "Other Settings", apoi mergeți spre colțul drept și folosiți "System Update"
- + Actualizările în timp ce folosiți B9S + Luma (ce aveți) sunt sigure
- + Actualizatorul poate afișa un mesaj care zice "Your system is up to date" în loc să se actualizeze. Acest lucru este normal dacă sunteți deja la zi; continuați în următoarea secțiune
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Secțiunea III - Homebrew Launcher
@@ -143,7 +139,7 @@ In this section, you will make backups of files that can be used to recover from
+ If you get an error, look for your issue in the [troubleshooting guide](troubleshooting#finalizing-setup)
1. Apăsați (A) pentru a continua
1. Apăsați (B) ca să vă întoarceți în meniul principal
-1. Selectaţi "Exit"
+1. Select "Exit"
1. Apăsați (A) ca să reblocați permisiunile de scriere dacă vi se cere
1. Navigate to `[S:] SYSNAND VIRTUAL`
1. Press (A) on `essential.exefs` to select it
diff --git a/_pages/ro_RO/get-started.txt b/_pages/ro_RO/get-started.txt
index e275779597..72b53319b6 100644
--- a/_pages/ro_RO/get-started.txt
+++ b/_pages/ro_RO/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/ro_RO/godmode9-usage.txt b/_pages/ro_RO/godmode9-usage.txt
index d1e15b90f0..e95a7c3f54 100644
--- a/_pages/ro_RO/godmode9-usage.txt
+++ b/_pages/ro_RO/godmode9-usage.txt
@@ -58,7 +58,7 @@ Unele dintre instrucțiunile de mai jos se aplică doar la ultima versiune de Go
+ Acest proces va lua ceva timp
1. Apăsați (A) pentru a continua
1. Apăsați (B) ca să vă întoarceți în meniul principal
-1. Selectaţi "Exit"
+1. Select "Exit"
1. Apăsați (A) ca să reblocați permisiunile de scriere dacă vi se cere
## Injectând orice aplicație .CIA în Health & Safety
@@ -109,6 +109,6 @@ Aceasta va funcţiona doar dacă injectarea Health & Safety a fost efectuată de
1. Apăsați (A) ca să deblocați scrierea în SysNAND (lvl1), apoi introduceți combinația de butoane care vi se cere
1. Apăsați (A) pentru a continua
1. Apăsați (B) ca să vă întoarceți în meniul principal
-1. Selectaţi "Exit"
+1. Select "Exit"
1. Apăsați (A) ca să reblocați permisiunile de scriere dacă vi se cere
1. Apăsați (Start) pentru a reporni dispozitivul
diff --git a/_pages/ro_RO/homebrew-launcher-(super-skaterhax).txt b/_pages/ro_RO/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..07b8802b76
--- /dev/null
+++ b/_pages/ro_RO/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Cuprins" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### Ce aveți nevoie
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Secțiunea II - Preparații
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Închideți dispozitivul
+1. Introduceți cardul SD în calculator
+1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reintroduceți cardul SD în dispozitivul dumneavoastră
+1. Porniți dispozitivul
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Apăsați (A) pentru a continua
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Închideți dispozitivul
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/ro_RO/include/addproxy.txt b/_pages/ro_RO/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/ro_RO/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/ro_RO/include/ctrnand-datayeet.txt b/_pages/ro_RO/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..50233e3ffc
--- /dev/null
+++ b/_pages/ro_RO/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Închideți dispozitivul
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigați spre `[0:] SDCARD` -> `gm9`
+1. Apăsați (X) pe imaginea`.bin` CTRTransfer pentru a o șterge
+1. Apăsați (A) pentru a confirma
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Selectați "Copy to 0:/gm9/out"
+1. Apăsați (A) pentru a continua
+1. While still highlighting `00010017`, press (X) to delete it
+1. Apăsați (A) pentru a confirma
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Apăsați (A) ca să reblocați permisiunile de scriere dacă vi se cere
+1. Apăsați (Start) pentru a reporni dispozitivul
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/ro_RO/include/ctrtransfer-main.txt b/_pages/ro_RO/include/ctrtransfer-main.txt
index bec8504805..458133cdec 100644
--- a/_pages/ro_RO/include/ctrtransfer-main.txt
+++ b/_pages/ro_RO/include/ctrtransfer-main.txt
@@ -3,7 +3,7 @@
1. Dacă vi se cere să reparați dara și ora RTC, apăsați (A) pentru a efectua, apoi setați data și ora, apoi apăsați (A) pentru a continua
+ Țineți cont că, dacă trebuiați să reparați data și ora, va trebui să reparați ora în System Settings de asemenea după completarea acestui ghid
1. Navigați spre `[0:] SDCARD` -> `gm9`
-1. Apăsați (A) pe CTRTransfer `.bin` pantru a-l selecta
+1. Apăsați (A) pe CTRTransfer `.bin` pentru a-l selecta
1. Selectați "CTRNAND options..."
1. Selectați "Transfer image to CTRNAND"
1. Dacă apare, selectați "Transfer to SysNAND"
@@ -21,9 +21,9 @@
1. Când vi se solicită, apăsaţi (A) pentru a continua
1. Apăsați (A) pentru a continua
1. Apăsați (B) ca să vă întoarceți în meniul principal
-1. Selectaţi "Exit"
+1. Select "Exit"
1. Apăsați (A) ca să reblocați permisiunile de scriere dacă vi se cere
1. Apăsați (Start) pentru a reporni dispozitivul
1. Actualizați dispozitivul mergând în System Settings, apoi "Other Settings", apoi mergeți spre colțul drept și folosiți "System Update"
- + Actualizările în timp ce folosiți B9S + Luma (ce aveți) sunt sigure
+ + Updates while using B9S + Luma (what you have) are safe
+ Dacă aceasta vă dă o eroare, setați setările de DNS pe "auto"
diff --git a/_pages/ro_RO/include/exploit-usm.txt b/_pages/ro_RO/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/ro_RO/include/exploit-usm.txt
+++ b/_pages/ro_RO/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/ro_RO/include/nand-backup.txt b/_pages/ro_RO/include/nand-backup.txt
index 61a67f3d1d..e6129047f9 100644
--- a/_pages/ro_RO/include/nand-backup.txt
+++ b/_pages/ro_RO/include/nand-backup.txt
@@ -8,7 +8,7 @@
+ If you get an error, look for your issue in the [troubleshooting guide](troubleshooting#finalizing-setup)
1. Apăsați (A) pentru a continua
1. Apăsați (B) ca să vă întoarceți în meniul principal
-1. Selectaţi "Exit"
+1. Select "Exit"
1. Apăsați (A) ca să reblocați permisiunile de scriere dacă vi se cere
1. Țineți apăsat (R) și apăsați (Start) în același timp pentru a închide dispozitivul
1. Introduceți cardul SD în calculator
diff --git a/_pages/ro_RO/include/rmproxy.txt b/_pages/ro_RO/include/rmproxy.txt
new file mode 100644
index 0000000000..fd19bbc06f
--- /dev/null
+++ b/_pages/ro_RO/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Închideți dispozitivul
diff --git a/_pages/ro_RO/include/safemodecheck.txt b/_pages/ro_RO/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/ro_RO/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/ro_RO/include/sysupdate.txt b/_pages/ro_RO/include/sysupdate.txt
new file mode 100644
index 0000000000..fabb567175
--- /dev/null
+++ b/_pages/ro_RO/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Actualizați dispozitivul mergând în System Settings, apoi "Other Settings", apoi mergeți spre colțul drept și folosiți "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + Actualizatorul poate afișa un mesaj care zice "Your system is up to date" în loc să se actualizeze. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/ro_RO/installing-boot9strap-(frogtool).txt b/_pages/ro_RO/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..b2c0e011ec
--- /dev/null
+++ b/_pages/ro_RO/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Cuprins" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### Ce aveți nevoie
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Secțiunea II - Preparații
+
+1. Închideți dispozitivul
+1. Introduceți cardul SD în calculator
+1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reintroduceți cardul SD în dispozitivul dumneavoastră
+1. Porniți dispozitivul
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. În cazul în care exploit-ul a mers, dispozitivul va încărca versiunea JPN de Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Lansați aplicația Download Play
+1. Așteptați până când vedeți două butoane
+ + Do not press either of the buttons
+1. Apăsați (L) + (Jos) + (Select) în același timp ca să deschideți meniul Rosalina
+1. Selectați "Miscellaneous options"
+1. Selectați "Switch the hb. title to the current app"
+1. Apăsați (B) pentru a continua
+1. Apăsați (B) ca să vă întoarceți la meniul principal Rosalina
+1. Apăsați (B) pentru a ieși din meniul Rosalina
+1. Apăsați (Home), apoi închideți Download Play
+1. Relaunch the Download Play application
+1. Dispozitivul dumneavoastră ar trebui să încarce Hombrew Launcher-ul
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Închideți dispozitivul
+
+___
+
+### Continuați la [Finalizând instalarea](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt b/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt
index dc84962555..be4086e961 100644
--- a/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Porniți dispozitivul
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Secțiunea III - Instalând boot9strap
diff --git a/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt b/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt
index 1366a29d96..adf543c543 100644
--- a/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### Ce aveți nevoie
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/ro_RO/installing-boot9strap-(safecerthax).txt b/_pages/ro_RO/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..6cce3d48bd
--- /dev/null
+++ b/_pages/ro_RO/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Cuprins" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### Ce aveți nevoie
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instrucțiuni
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Secțiunea II - Preparații
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Introduceți cardul SD în calculator
+1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Creați un folder numit `boot9strap` pe rădăcina cardului SD
+1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reintroduceți cardul SD în dispozitivul dumneavoastră
+1. Porniți dispozitivul
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Închideți dispozitivul
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. Dacă exploit-ul a avut succes, veți porni în SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continuați la [Finalizând instalarea](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ro_RO/installing-boot9strap-(ssloth-browser).txt b/_pages/ro_RO/installing-boot9strap-(ssloth-browser).txt
index 214efa1a75..a9c1d2af76 100644
--- a/_pages/ro_RO/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/ro_RO/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Închideți dispozitivul
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/ro_RO/installing-boot9strap-(usm).txt b/_pages/ro_RO/installing-boot9strap-(usm).txt
index fd6fcd853a..b658bb57c4 100644
--- a/_pages/ro_RO/installing-boot9strap-(usm).txt
+++ b/_pages/ro_RO/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/ro_RO/move-emunand.txt b/_pages/ro_RO/move-emunand.txt
index b1c6c476d5..bed0a5e800 100644
--- a/_pages/ro_RO/move-emunand.txt
+++ b/_pages/ro_RO/move-emunand.txt
@@ -8,7 +8,7 @@ title: "Mutare EmuNAND"
Aceasta este o secțiune suplimentară pentru a muta conținutul unui EmuNAND precedent către noul CFW SysNAND, după care se va elimina partiția veche EmuNAND. Țineți cont că termenii EmuNAND și RedNAND se referă la implementări puțin diferite ale [aceluiași concept](http://3dbrew.org/wiki/NAND_Redirection).
-Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
+Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul '/luma/payloads/' de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
TREBUIE să aveți deja instalat Luma3DS şi boot9strap pentru a-l folosi.
{: .notice--danger}
diff --git a/_pages/ro_RO/region-changing.txt b/_pages/ro_RO/region-changing.txt
index 2f39b8fab4..86345454c8 100644
--- a/_pages/ro_RO/region-changing.txt
+++ b/_pages/ro_RO/region-changing.txt
@@ -6,11 +6,15 @@ title: "Schimb de regiune"
### Lectură obligatorie
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,33 +22,29 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-TREBUIE să aveți deja instalat Luma3DS şi boot9strap pentru a-l folosi.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### Ce aveți nevoie
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
* Cea mai nouă versiune de [FBI](https://github.com/Steveice10/FBI/releases/) *(fișierul `.3dsx`)*
* The 11.15.0 CTRTransfer image for your device type of the region that you want to change to (e.g. Download "New 3DS or 2DS - USA" if you have a New 3DS and want to change your region to USA)
+ - [New 3DS or 2DS - 11.15.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:2a39586a0a10d1f0a9470b082ef1453e502b2425&xt=urn:btmh:12205090f0a43a956bd7449658ee0580949d15ae112c80007fb2ef42e3265b6c5f6c&dn=11.15.0-47E_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
- + - [New 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:986b454cab2d9f27daa63d4291f61aed039871d2&xt=urn:btmh:1220c8c96bd76b6fef041aada9ce4e3cf06ef141f3c4558310b9c3a00e39bccc43a1&dn=11.15.0-47J_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ * - [New 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:986b454cab2d9f27daa63d4291f61aed039871d2&xt=urn:btmh:1220c8c96bd76b6fef041aada9ce4e3cf06ef141f3c4558310b9c3a00e39bccc43a1&dn=11.15.0-47J_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
* - [New 3DS or 2DS - 11.15.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:e247b21e1f81f76acf6d3140da45da858e76f1f6&xt=urn:btmh:122008168a003666c14783998d1dd82ac02d1b3be902efa75cf5a03ee47da1fecd73&dn=11.15.0-41K_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
* - [New 3DS or 2DS - 11.15.0 - USA - CTRTransfer](magnet:?xt=urn:btih:8ae25de1ab01c9304eece9785d5db6cdd6728214&xt=urn:btmh:1220ab284cc822f3170305723e9920e1bb4d7649fdf528c3ea04aada31e09bfbbe57&dn=11.15.0-47U_ctrtransfer_n3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
~
* - [Old 3DS or 2DS - 11.15.0 - CHN - CTRTransfer](magnet:?xt=urn:btih:f71d2379e577db22d7f14a656bca7bf2eb5243f8&xt=urn:btmh:12200c6ee93f63deef8ce9023b8214ca36cd29c37d2726acf7a15594256409f6629b&dn=11.15.0-4C_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
* - [Old 3DS or 2DS - 11.15.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:fc71540a99c884ab8a4211192d3af92c7ffb9372&xt=urn:btmh:12203c317846d43110fd3a35cedf427cb5fdd58ac764316f4d0634181efbb762ee92&dn=11.15.0-47E_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
- * - [Old 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:7b88adf3f47d036bcdee987f6597770eaafdd8dd&xt=urn:btmh:1220f39be6c14438b07ebdf120161215088d56c59608d5f34f0744d972c7a0cf7ca2&dn=11.15.0-47J_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ + - [Old 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:7b88adf3f47d036bcdee987f6597770eaafdd8dd&xt=urn:btmh:1220f39be6c14438b07ebdf120161215088d56c59608d5f34f0744d972c7a0cf7ca2&dn=11.15.0-47J_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:90d6689106751b057616d32445442fc1b7370e38&xt=urn:btmh:1220a08fe569ac1596f6a113730de3cc7aa0dfd6858d40830cc0f0cee07bf585fd93&dn=11.15.0-41K_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - TWN - CTRTransfer](magnet:?xt=urn:btih:19f978d42b0d9590bc742d7598efa45091567cee&xt=urn:btmh:12204429bc94456825530a2dff233ed399a292e1004a64b65fa4b451a69e116cad2a&dn=11.15.0-39T_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - USA - CTRTransfer](magnet:?xt=urn:btih:fd39778d4116a210c3116c014521120f0e7b9e1d&xt=urn:btmh:12203a51aca201f0635eecb15645cd4598bd49b1ad354e1ea81c24eb488760f3bd2b&dn=11.15.0-47U_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Deschideți System Settings
-1. Mergeți în "Other Settings", "Profile", apoi "Region Settings"
-1. Selectaţi o ţară din regiunea la care ați schimbat
-1. Dacă vi se solicită, nu aveţi nevoie să setați un stat
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/ro_RO/site-navigation.txt b/_pages/ro_RO/site-navigation.txt
index 17fddf1a0f..ff91c18d03 100644
--- a/_pages/ro_RO/site-navigation.txt
+++ b/_pages/ro_RO/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [Folosind GodMode9](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Acasă](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Instalând boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Instalând boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Instalând boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Instalând boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/ro_RO/troubleshooting.txt b/_pages/ro_RO/troubleshooting.txt
index 793ef11100..47636e0ca5 100644
--- a/_pages/ro_RO/troubleshooting.txt
+++ b/_pages/ro_RO/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/ru_RU/bannerbomb3.txt b/_pages/ru_RU/bannerbomb3.txt
index 49a5cb4fe8..990675f311 100644
--- a/_pages/ru_RU/bannerbomb3.txt
+++ b/_pages/ru_RU/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### Что понадобится
-* Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Часть I - Подготовительные работы
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/ru_RU/ctrtransfer.txt b/_pages/ru_RU/ctrtransfer.txt
index 5e66ccb234..17c62cb15f 100644
--- a/_pages/ru_RU/ctrtransfer.txt
+++ b/_pages/ru_RU/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Обратите внимание, что если у вас имеются другие файлы помимо `GodMode9.firm` в папке `/luma/payloads/` на SD-карте, удержание кнопки (Start) при загрузке будет запускать "chainloader menu", где вам нужно будет использовать D-Pad и кнопку (A) для выбора "GodMode9" при выполнении этих инструкций.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-Для продолжения, у вас уже ДОЛЖНА быть установлена Luma3DS и boot9strap.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### Что понадобится
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Часть V - Удаление образа CTRTransfer
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/ru_RU/dumping-movable-(nimhax).txt b/_pages/ru_RU/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..0ebb9a82b7
--- /dev/null
+++ b/_pages/ru_RU/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Содержание" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Что понадобится
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Инструкция
+
+#### Часть I - Подготовительные работы
+
+1. Выключите консоль
+1. Вставьте SD-карту в компьютер
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Вставьте SD-карту обратно в консоль
+1. Включите консоль
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/ru_RU/finalizing-setup.txt b/_pages/ru_RU/finalizing-setup.txt
index 1f40c63f59..8a9b4869be 100644
--- a/_pages/ru_RU/finalizing-setup.txt
+++ b/_pages/ru_RU/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### Что понадобится
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Обновите прошивку консоли, зайдя в Системные настройки (System Settings), затем "Прочие настройки" (Other Settings), затем листайте вправо до конца и выберите пункт "Обновление" (System Update)
- + Обновление консоли с установленным B9S + Luma (установленых у вас) безопасно
- + Вместо начала процесса обновления может появиться сообщение "Система обновлена". Это нормально, если вы уже на последней версии прошивки; переходите к следующей части
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Часть III - Homebrew Launcher
diff --git a/_pages/ru_RU/get-started.txt b/_pages/ru_RU/get-started.txt
index 9a89d32064..47a408a332 100644
--- a/_pages/ru_RU/get-started.txt
+++ b/_pages/ru_RU/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/ru_RU/homebrew-launcher-(super-skaterhax).txt b/_pages/ru_RU/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..276265b81e
--- /dev/null
+++ b/_pages/ru_RU/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Содержание" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### Что понадобится
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Часть II - Подготовка
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Выключите консоль
+1. Вставьте SD-карту в компьютер
+1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Вставьте SD-карту обратно в консоль
+1. Включите консоль
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Нажмите (A), чтобы продолжить
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Выключите консоль
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/ru_RU/include/addproxy.txt b/_pages/ru_RU/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/ru_RU/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/ru_RU/include/ctrnand-datayeet.txt b/_pages/ru_RU/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..285bac0eac
--- /dev/null
+++ b/_pages/ru_RU/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Выключите консоль
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Перейдите в `[0:] SDCARD` -> `gm9`
+1. Нажмите (X), выделив файл `.bin` CTRTransfer чтобы удалить его
+1. Нажмите (A) для подтверждения
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Выберите "Copy to 0:/gm9/out"
+1. Нажмите (A), чтобы продолжить
+1. While still highlighting `00010017`, press (X) to delete it
+1. Нажмите (A) для подтверждения
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Нажмите (A) чтобы восстановить запрет на запись, если появится запрос
+1. Нажмите (Start) для перезагрузки
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/ru_RU/include/exploit-usm.txt b/_pages/ru_RU/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/ru_RU/include/exploit-usm.txt
+++ b/_pages/ru_RU/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/ru_RU/include/rmproxy.txt b/_pages/ru_RU/include/rmproxy.txt
new file mode 100644
index 0000000000..8df5cc51a7
--- /dev/null
+++ b/_pages/ru_RU/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Выключите консоль
diff --git a/_pages/ru_RU/include/safemodecheck.txt b/_pages/ru_RU/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/ru_RU/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/ru_RU/include/sysupdate.txt b/_pages/ru_RU/include/sysupdate.txt
new file mode 100644
index 0000000000..3a818bf073
--- /dev/null
+++ b/_pages/ru_RU/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Обновите прошивку консоли, зайдя в Системные настройки (System Settings), затем "Прочие настройки" (Other Settings), затем листайте вправо до конца и выберите пункт "Обновление" (System Update)
+{%- if include.cfw == "true" %}
+ + Обновление консоли с установленным B9S + Luma (установленых у вас) безопасно
+{%- endif %}
+ + Вместо начала процесса обновления может появиться сообщение "Система обновлена". This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/ru_RU/installing-boot9strap-(frogtool).txt b/_pages/ru_RU/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..2d5c6a175b
--- /dev/null
+++ b/_pages/ru_RU/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Содержание" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### Что понадобится
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Часть II - Подготовка
+
+1. Выключите консоль
+1. Вставьте SD-карту в компьютер
+1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Вставьте SD-карту обратно в консоль
+1. Включите консоль
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. Если эксплойт сработал корректно, запустится японская версия Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Запустите приложение Загружаемая игра
+1. Дождитесь появления двух кнопок
+ + Do not press either of the buttons
+1. Нажмите (L) + (Вниз) + (Select) одновременно чтобы открыть меню Rosalina
+1. Выберите "Miscellaneous options"
+1. Выберите "Switch the hb. title to the current app."
+1. Нажмите (B), чтобы продолжить
+1. Нажмите (B) для возврата в главное меню Rosalina
+1. Нажмите (B) для выхода из главного меню Rosalina
+1. Нажмите (Home), затем закройте приложение Загружаемая игра
+1. Relaunch the Download Play application
+1. Консоль должна загрузиться в Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Выключите консоль
+
+___
+
+### Следующий шаг: [Завершение установки](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt b/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt
index 0f9cf097b0..39adfb624c 100644
--- a/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Включите консоль
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Часть III - Установка boot9strap
diff --git a/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt b/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt
index 7ce68851d3..6ce6eadbfe 100644
--- a/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### Что понадобится
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/ru_RU/installing-boot9strap-(safecerthax).txt b/_pages/ru_RU/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..190d30d5e6
--- /dev/null
+++ b/_pages/ru_RU/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Содержание" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### Что понадобится
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Инструкция
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Часть II - Подготовка
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Вставьте SD-карту в компьютер
+1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Создайте папку `boot9strap` в корне SD-карты
+1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Вставьте SD-карту обратно в консоль
+1. Включите консоль
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Выключите консоль
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. Если эксплойт сработал, запустится SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Следующий шаг: [Завершение установки](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ru_RU/installing-boot9strap-(ssloth-browser).txt b/_pages/ru_RU/installing-boot9strap-(ssloth-browser).txt
index 1a7acb3756..fbf1a49c8d 100644
--- a/_pages/ru_RU/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/ru_RU/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Выключите консоль
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/ru_RU/installing-boot9strap-(usm).txt b/_pages/ru_RU/installing-boot9strap-(usm).txt
index 650132ac33..80d5c14a51 100644
--- a/_pages/ru_RU/installing-boot9strap-(usm).txt
+++ b/_pages/ru_RU/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Часть III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/ru_RU/region-changing.txt b/_pages/ru_RU/region-changing.txt
index d70b0d97e4..0328598775 100644
--- a/_pages/ru_RU/region-changing.txt
+++ b/_pages/ru_RU/region-changing.txt
@@ -6,11 +6,15 @@ title: "Смена региона"
### Обязательно к прочтению
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Обратите внимание, что если у вас имеются другие файлы помимо `GodMode9.firm` в папке `/luma/payloads/` на SD-карте, удержание кнопки (Start) при загрузке будет запускать "chainloader menu", где вам нужно будет использовать D-Pad и кнопку (A) для выбора "GodMode9" при выполнении этих инструкций.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-Для продолжения, у вас уже ДОЛЖНА быть установлена Luma3DS и boot9strap.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### Что понадобится
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Откройте Системные настройки (System settings)
-1. Перейдите в "Прочие настройки" (Other Settings), затем "Профиль" (Profile), затем "Настройки региона" (Region Settings)
-1. Выберите страну из вашего нового региона
-1. При появлении запроса о штате указывать его не нужно
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/ru_RU/site-navigation.txt b/_pages/ru_RU/site-navigation.txt
index 106b660c55..c8e64becc0 100644
--- a/_pages/ru_RU/site-navigation.txt
+++ b/_pages/ru_RU/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [Использование GodMode9](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Главная](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Установка boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Установка boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Установка boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Установка boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/ru_RU/troubleshooting.txt b/_pages/ru_RU/troubleshooting.txt
index 89cd5dcd9d..62fe42d4a4 100644
--- a/_pages/ru_RU/troubleshooting.txt
+++ b/_pages/ru_RU/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/sv_SE/bannerbomb3.txt b/_pages/sv_SE/bannerbomb3.txt
index 291d05156c..cf11f93cad 100644
--- a/_pages/sv_SE/bannerbomb3.txt
+++ b/_pages/sv_SE/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/sv_SE/ctrtransfer.txt b/_pages/sv_SE/ctrtransfer.txt
index da7a92c115..9b915ee67d 100644
--- a/_pages/sv_SE/ctrtransfer.txt
+++ b/_pages/sv_SE/ctrtransfer.txt
@@ -8,17 +8,15 @@ titel: ”CTRTransfer”
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Observera att om du har någon annan payload än `GodMode9.firm` i mappen `/luma/payloads/` på ditt SD-kort, så kommer en "chainloader menu" visas om du håller inne (Start) under uppstart, där du måste använda D-Pad:en och knappen (A) för att välja "GodMode9" för dessa instruktioner.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-Du MÅSTE redan ha installerat Luma3DS och boot9strap eller arm9loaderhax för att använda detta.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/sv_SE/dumping-movable-(nimhax).txt b/_pages/sv_SE/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..559837dacc
--- /dev/null
+++ b/_pages/sv_SE/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Stäng av din enhet
+1. Insert your SD card into your computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Sätt tillbaka ditt SD-kort i din enhet
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/sv_SE/finalizing-setup.txt b/_pages/sv_SE/finalizing-setup.txt
index fdb2e6c199..bb82eef376 100644
--- a/_pages/sv_SE/finalizing-setup.txt
+++ b/_pages/sv_SE/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/sv_SE/get-started.txt b/_pages/sv_SE/get-started.txt
index 02e21c65b7..5b9574f8e3 100644
--- a/_pages/sv_SE/get-started.txt
+++ b/_pages/sv_SE/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/sv_SE/homebrew-launcher-(super-skaterhax).txt b/_pages/sv_SE/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..0a2e18fd9f
--- /dev/null
+++ b/_pages/sv_SE/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Stäng av din enhet
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Sätt tillbaka ditt SD-kort i din enhet
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Stäng av din enhet
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/sv_SE/include/addproxy.txt b/_pages/sv_SE/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/sv_SE/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/sv_SE/include/ctrnand-datayeet.txt b/_pages/sv_SE/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..61c34c17ff
--- /dev/null
+++ b/_pages/sv_SE/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Stäng av din enhet
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigera till `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/sv_SE/include/exploit-usm.txt b/_pages/sv_SE/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/sv_SE/include/exploit-usm.txt
+++ b/_pages/sv_SE/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/sv_SE/include/rmproxy.txt b/_pages/sv_SE/include/rmproxy.txt
new file mode 100644
index 0000000000..385759e953
--- /dev/null
+++ b/_pages/sv_SE/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Stäng av din enhet
diff --git a/_pages/sv_SE/include/safemodecheck.txt b/_pages/sv_SE/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/sv_SE/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/sv_SE/include/sysupdate.txt b/_pages/sv_SE/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/sv_SE/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/sv_SE/installing-boot9strap-(frogtool).txt b/_pages/sv_SE/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..c1df53fb65
--- /dev/null
+++ b/_pages/sv_SE/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Stäng av din enhet
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Sätt tillbaka ditt SD-kort i din enhet
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Stäng av din enhet
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt b/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt b/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/sv_SE/installing-boot9strap-(safecerthax).txt b/_pages/sv_SE/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..0ba689cdfe
--- /dev/null
+++ b/_pages/sv_SE/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Sätt tillbaka ditt SD-kort i din enhet
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Stäng av din enhet
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/sv_SE/installing-boot9strap-(ssloth-browser).txt b/_pages/sv_SE/installing-boot9strap-(ssloth-browser).txt
index 7627438b9d..ed6e53657a 100644
--- a/_pages/sv_SE/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/sv_SE/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Stäng av din enhet
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/sv_SE/installing-boot9strap-(usm).txt b/_pages/sv_SE/installing-boot9strap-(usm).txt
index 69707f3ebd..b8e2bdd9b9 100644
--- a/_pages/sv_SE/installing-boot9strap-(usm).txt
+++ b/_pages/sv_SE/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/sv_SE/region-changing.txt b/_pages/sv_SE/region-changing.txt
index f9fdcd127e..29c070ad25 100644
--- a/_pages/sv_SE/region-changing.txt
+++ b/_pages/sv_SE/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Observera att om du har någon annan payload än `GodMode9.firm` i mappen `/luma/payloads/` på ditt SD-kort, så kommer en "chainloader menu" visas om du håller inne (Start) under uppstart, där du måste använda D-Pad:en och knappen (A) för att välja "GodMode9" för dessa instruktioner.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-Du MÅSTE redan ha installerat Luma3DS och boot9strap eller arm9loaderhax för att använda detta.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/sv_SE/site-navigation.txt b/_pages/sv_SE/site-navigation.txt
index 11618b8af8..357414ea48 100644
--- a/_pages/sv_SE/site-navigation.txt
+++ b/_pages/sv_SE/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Hem](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installera boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installera boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/sv_SE/troubleshooting.txt b/_pages/sv_SE/troubleshooting.txt
index e28ca4054f..3618ce864f 100644
--- a/_pages/sv_SE/troubleshooting.txt
+++ b/_pages/sv_SE/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/th_TH/bannerbomb3.txt b/_pages/th_TH/bannerbomb3.txt
index 5a11fffeff..0bf8e2d4a0 100644
--- a/_pages/th_TH/bannerbomb3.txt
+++ b/_pages/th_TH/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/th_TH/ctrtransfer.txt b/_pages/th_TH/ctrtransfer.txt
index 7d28b44618..b4ddf12625 100644
--- a/_pages/th_TH/ctrtransfer.txt
+++ b/_pages/th_TH/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/th_TH/dumping-movable-(nimhax).txt b/_pages/th_TH/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..1621a85165
--- /dev/null
+++ b/_pages/th_TH/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/th_TH/finalizing-setup.txt b/_pages/th_TH/finalizing-setup.txt
index 99a2426cc8..5e4e918277 100644
--- a/_pages/th_TH/finalizing-setup.txt
+++ b/_pages/th_TH/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/th_TH/get-started.txt b/_pages/th_TH/get-started.txt
index 6b86afa5d6..fd65fe67fa 100644
--- a/_pages/th_TH/get-started.txt
+++ b/_pages/th_TH/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/th_TH/homebrew-launcher-(super-skaterhax).txt b/_pages/th_TH/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..6f4daef090
--- /dev/null
+++ b/_pages/th_TH/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/th_TH/include/addproxy.txt b/_pages/th_TH/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/th_TH/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/th_TH/include/ctrnand-datayeet.txt b/_pages/th_TH/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..6749b1d1bc
--- /dev/null
+++ b/_pages/th_TH/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/th_TH/include/exploit-usm.txt b/_pages/th_TH/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/th_TH/include/exploit-usm.txt
+++ b/_pages/th_TH/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/th_TH/include/rmproxy.txt b/_pages/th_TH/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/th_TH/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/th_TH/include/safemodecheck.txt b/_pages/th_TH/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/th_TH/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/th_TH/include/sysupdate.txt b/_pages/th_TH/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/th_TH/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/th_TH/installing-boot9strap-(frogtool).txt b/_pages/th_TH/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ddfc6a7304
--- /dev/null
+++ b/_pages/th_TH/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/th_TH/installing-boot9strap-(hbl-usm).txt b/_pages/th_TH/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/th_TH/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/th_TH/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/th_TH/installing-boot9strap-(kartdlphax).txt b/_pages/th_TH/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/th_TH/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/th_TH/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/th_TH/installing-boot9strap-(safecerthax).txt b/_pages/th_TH/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..075e190486
--- /dev/null
+++ b/_pages/th_TH/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/th_TH/installing-boot9strap-(ssloth-browser).txt b/_pages/th_TH/installing-boot9strap-(ssloth-browser).txt
index bfd7771226..e5beafbea0 100644
--- a/_pages/th_TH/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/th_TH/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/th_TH/installing-boot9strap-(usm).txt b/_pages/th_TH/installing-boot9strap-(usm).txt
index 6f9a1eb70c..4e326ff6d3 100644
--- a/_pages/th_TH/installing-boot9strap-(usm).txt
+++ b/_pages/th_TH/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/th_TH/region-changing.txt b/_pages/th_TH/region-changing.txt
index 9af30fe4b5..413fdb3c10 100644
--- a/_pages/th_TH/region-changing.txt
+++ b/_pages/th_TH/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/th_TH/site-navigation.txt b/_pages/th_TH/site-navigation.txt
index 40ef6b75b6..a2135747ab 100644
--- a/_pages/th_TH/site-navigation.txt
+++ b/_pages/th_TH/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/th_TH/troubleshooting.txt b/_pages/th_TH/troubleshooting.txt
index c8f2789ae4..4f46f113bb 100644
--- a/_pages/th_TH/troubleshooting.txt
+++ b/_pages/th_TH/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/tr_TR/bannerbomb3.txt b/_pages/tr_TR/bannerbomb3.txt
index 3ad4e37065..6fb289b448 100644
--- a/_pages/tr_TR/bannerbomb3.txt
+++ b/_pages/tr_TR/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/tr_TR/ctrtransfer.txt b/_pages/tr_TR/ctrtransfer.txt
index b37dea11eb..98de0e505f 100644
--- a/_pages/tr_TR/ctrtransfer.txt
+++ b/_pages/tr_TR/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-SD Kartınızdaki '/luma/payloads/' klasöründe 'Godmode9.firm' dışında bir dosya varsa, cihaz açılırken (Start) 'a basılı tutmak, D-Pad ve (A) tuşunu kullanarak "GodMode9"u seçmeniz gereken bir "chainloader menu" açacaktır.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/tr_TR/dumping-movable-(nimhax).txt b/_pages/tr_TR/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..74cc978384
--- /dev/null
+++ b/_pages/tr_TR/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title = "İçindekiler"%}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. SD kartınızı bilgisayarınıza takın
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/tr_TR/finalizing-setup.txt b/_pages/tr_TR/finalizing-setup.txt
index c55e2f2bf5..560ee204f7 100644
--- a/_pages/tr_TR/finalizing-setup.txt
+++ b/_pages/tr_TR/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/tr_TR/get-started.txt b/_pages/tr_TR/get-started.txt
index e5605d1b65..7fc97464df 100644
--- a/_pages/tr_TR/get-started.txt
+++ b/_pages/tr_TR/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/tr_TR/homebrew-launcher-(super-skaterhax).txt b/_pages/tr_TR/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..c333d84802
--- /dev/null
+++ b/_pages/tr_TR/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title = "İçindekiler"%}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. SD kartınızı bilgisayarınıza takın
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Devam etmek için (A) basın
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/tr_TR/include/addproxy.txt b/_pages/tr_TR/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/tr_TR/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/tr_TR/include/ctrnand-datayeet.txt b/_pages/tr_TR/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..53f9594ca0
--- /dev/null
+++ b/_pages/tr_TR/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Onaylamak için (A) basın
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Devam etmek için (A) basın
+1. While still highlighting `00010017`, press (X) to delete it
+1. Onaylamak için (A) basın
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/tr_TR/include/exploit-usm.txt b/_pages/tr_TR/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/tr_TR/include/exploit-usm.txt
+++ b/_pages/tr_TR/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/tr_TR/include/rmproxy.txt b/_pages/tr_TR/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/tr_TR/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/tr_TR/include/safemodecheck.txt b/_pages/tr_TR/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/tr_TR/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/tr_TR/include/sysupdate.txt b/_pages/tr_TR/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/tr_TR/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/tr_TR/installing-boot9strap-(frogtool).txt b/_pages/tr_TR/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..a488713178
--- /dev/null
+++ b/_pages/tr_TR/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title = "İçindekiler"%}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. SD kartınızı bilgisayarınıza takın
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### [Kurulumu Tamamlamak](finalizing-setup) için devam edin
+{: .notice--primary}
diff --git a/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt b/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt
index 8419c001b5..c628245498 100644
--- a/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt b/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt
index a1ac5ab80e..8f8351dfdd 100644
--- a/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/tr_TR/installing-boot9strap-(safecerthax).txt b/_pages/tr_TR/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..1d9189bcd8
--- /dev/null
+++ b/_pages/tr_TR/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title = "İçindekiler"%}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. SD kartınızı bilgisayarınıza takın
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### [Kurulumu Tamamlamak](finalizing-setup) için devam edin
+{: .notice--primary}
diff --git a/_pages/tr_TR/installing-boot9strap-(ssloth-browser).txt b/_pages/tr_TR/installing-boot9strap-(ssloth-browser).txt
index e37f765806..7ea9d1a709 100644
--- a/_pages/tr_TR/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/tr_TR/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/tr_TR/installing-boot9strap-(usm).txt b/_pages/tr_TR/installing-boot9strap-(usm).txt
index 0530210b2d..d20e834259 100644
--- a/_pages/tr_TR/installing-boot9strap-(usm).txt
+++ b/_pages/tr_TR/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/tr_TR/region-changing.txt b/_pages/tr_TR/region-changing.txt
index 4f4b676141..4f7d939d7d 100644
--- a/_pages/tr_TR/region-changing.txt
+++ b/_pages/tr_TR/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Okumanız Gerekli
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-SD Kartınızdaki '/luma/payloads/' klasöründe 'Godmode9.firm' dışında bir dosya varsa, cihaz açılırken (Start) 'a basılı tutmak, D-Pad ve (A) tuşunu kullanarak "GodMode9"u seçmeniz gereken bir "chainloader menu" açacaktır.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -44,7 +44,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
~
+ - [Old 3DS or 2DS - 11.15.0 - CHN - CTRTransfer](magnet:?xt=urn:btih:f71d2379e577db22d7f14a656bca7bf2eb5243f8&xt=urn:btmh:12200c6ee93f63deef8ce9023b8214ca36cd29c37d2726acf7a15594256409f6629b&dn=11.15.0-4C_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:fc71540a99c884ab8a4211192d3af92c7ffb9372&xt=urn:btmh:12203c317846d43110fd3a35cedf427cb5fdd58ac764316f4d0634181efbb762ee92&dn=11.15.0-47E_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
- + - [Old 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:7b88adf3f47d036bcdee987f6597770eaafdd8dd&xt=urn:btmh:1220f39be6c14438b07ebdf120161215088d56c59608d5f34f0744d972c7a0cf7ca2&dn=11.15.0-47J_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ + - [Old 3DS or 2DS - 11.15.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:7b88adf3f47d036bcdee987f6597770eaafdd8dd&xt=urn:btmh:1220f39be6c14438b07ebdf120161215088d56c59608d5f34f0744d972c7a0cf7ca2&dn=11.15.0-47J_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:90d6689106751b057616d32445442fc1b7370e38&xt=urn:btmh:1220a08fe569ac1596f6a113730de3cc7aa0dfd6858d40830cc0f0cee07bf585fd93&dn=11.15.0-41K_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - TWN - CTRTransfer](magnet:?xt=urn:btih:19f978d42b0d9590bc742d7598efa45091567cee&xt=urn:btmh:12204429bc94456825530a2dff233ed399a292e1004a64b65fa4b451a69e116cad2a&dn=11.15.0-39T_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [Old 3DS or 2DS - 11.15.0 - USA - CTRTransfer](magnet:?xt=urn:btih:fd39778d4116a210c3116c014521120f0e7b9e1d&xt=urn:btmh:12203a51aca201f0635eecb15645cd4598bd49b1ad354e1ea81c24eb488760f3bd2b&dn=11.15.0-47U_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. "Other Settings" gidin, sonra "Profile" ve en son "Region Settings" gidin
-1. Seçtiğiniz region'a uygun bir ülke seçin
-1. İstenirse şehir seçin
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/tr_TR/site-navigation.txt b/_pages/tr_TR/site-navigation.txt
index 0317b27c47..64cca33f7a 100644
--- a/_pages/tr_TR/site-navigation.txt
+++ b/_pages/tr_TR/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/tr_TR/troubleshooting.txt b/_pages/tr_TR/troubleshooting.txt
index 532c8bbd5f..484f95b9f4 100644
--- a/_pages/tr_TR/troubleshooting.txt
+++ b/_pages/tr_TR/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/uk_UA/bannerbomb3.txt b/_pages/uk_UA/bannerbomb3.txt
index 5a11fffeff..0bf8e2d4a0 100644
--- a/_pages/uk_UA/bannerbomb3.txt
+++ b/_pages/uk_UA/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/uk_UA/ctrtransfer.txt b/_pages/uk_UA/ctrtransfer.txt
index 7d28b44618..b4ddf12625 100644
--- a/_pages/uk_UA/ctrtransfer.txt
+++ b/_pages/uk_UA/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/uk_UA/dumping-movable-(nimhax).txt b/_pages/uk_UA/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..1621a85165
--- /dev/null
+++ b/_pages/uk_UA/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/uk_UA/finalizing-setup.txt b/_pages/uk_UA/finalizing-setup.txt
index 99a2426cc8..5e4e918277 100644
--- a/_pages/uk_UA/finalizing-setup.txt
+++ b/_pages/uk_UA/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/uk_UA/get-started.txt b/_pages/uk_UA/get-started.txt
index 6b86afa5d6..fd65fe67fa 100644
--- a/_pages/uk_UA/get-started.txt
+++ b/_pages/uk_UA/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/uk_UA/homebrew-launcher-(super-skaterhax).txt b/_pages/uk_UA/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..6f4daef090
--- /dev/null
+++ b/_pages/uk_UA/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/uk_UA/include/addproxy.txt b/_pages/uk_UA/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/uk_UA/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/uk_UA/include/ctrnand-datayeet.txt b/_pages/uk_UA/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..6749b1d1bc
--- /dev/null
+++ b/_pages/uk_UA/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/uk_UA/include/exploit-usm.txt b/_pages/uk_UA/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/uk_UA/include/exploit-usm.txt
+++ b/_pages/uk_UA/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/uk_UA/include/rmproxy.txt b/_pages/uk_UA/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/uk_UA/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/uk_UA/include/safemodecheck.txt b/_pages/uk_UA/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/uk_UA/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/uk_UA/include/sysupdate.txt b/_pages/uk_UA/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/uk_UA/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/uk_UA/installing-boot9strap-(frogtool).txt b/_pages/uk_UA/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ddfc6a7304
--- /dev/null
+++ b/_pages/uk_UA/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt b/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt b/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/uk_UA/installing-boot9strap-(safecerthax).txt b/_pages/uk_UA/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..075e190486
--- /dev/null
+++ b/_pages/uk_UA/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/uk_UA/installing-boot9strap-(ssloth-browser).txt b/_pages/uk_UA/installing-boot9strap-(ssloth-browser).txt
index bfd7771226..e5beafbea0 100644
--- a/_pages/uk_UA/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/uk_UA/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/uk_UA/installing-boot9strap-(usm).txt b/_pages/uk_UA/installing-boot9strap-(usm).txt
index 6f9a1eb70c..4e326ff6d3 100644
--- a/_pages/uk_UA/installing-boot9strap-(usm).txt
+++ b/_pages/uk_UA/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/uk_UA/region-changing.txt b/_pages/uk_UA/region-changing.txt
index 9af30fe4b5..413fdb3c10 100644
--- a/_pages/uk_UA/region-changing.txt
+++ b/_pages/uk_UA/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/uk_UA/site-navigation.txt b/_pages/uk_UA/site-navigation.txt
index 40ef6b75b6..a2135747ab 100644
--- a/_pages/uk_UA/site-navigation.txt
+++ b/_pages/uk_UA/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/uk_UA/troubleshooting.txt b/_pages/uk_UA/troubleshooting.txt
index c8f2789ae4..4f46f113bb 100644
--- a/_pages/uk_UA/troubleshooting.txt
+++ b/_pages/uk_UA/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/vi_VN/bannerbomb3.txt b/_pages/vi_VN/bannerbomb3.txt
index 5a11fffeff..0bf8e2d4a0 100644
--- a/_pages/vi_VN/bannerbomb3.txt
+++ b/_pages/vi_VN/bannerbomb3.txt
@@ -26,7 +26,7 @@ If you have a Taiwanese console (indicated by a T after the system version), fol
### What You Need
-* Your `movable.sed` file from completing [Seedminer](seedminer)
+* Your `movable.sed` file from completing Seedminer or nimhax
#### Section I - Prep Work
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/vi_VN/ctrtransfer.txt b/_pages/vi_VN/ctrtransfer.txt
index 7d28b44618..b4ddf12625 100644
--- a/_pages/vi_VN/ctrtransfer.txt
+++ b/_pages/vi_VN/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
This is an add-on section for installing an 11.15.0 CTRTransfer image to your device.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a CTRTransfer may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section V - Remove CTRTransfer image
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/vi_VN/dumping-movable-(nimhax).txt b/_pages/vi_VN/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..1621a85165
--- /dev/null
+++ b/_pages/vi_VN/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/vi_VN/finalizing-setup.txt b/_pages/vi_VN/finalizing-setup.txt
index 99a2426cc8..5e4e918277 100644
--- a/_pages/vi_VN/finalizing-setup.txt
+++ b/_pages/vi_VN/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + Updates while using B9S + Luma (what you have) are safe
- + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### Section III - Homebrew Launcher
diff --git a/_pages/vi_VN/get-started.txt b/_pages/vi_VN/get-started.txt
index 6b86afa5d6..fd65fe67fa 100644
--- a/_pages/vi_VN/get-started.txt
+++ b/_pages/vi_VN/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### Alternate Methods
diff --git a/_pages/vi_VN/homebrew-launcher-(super-skaterhax).txt b/_pages/vi_VN/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..6f4daef090
--- /dev/null
+++ b/_pages/vi_VN/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. Press (A) to continue
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. Power off your device
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/vi_VN/include/addproxy.txt b/_pages/vi_VN/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/vi_VN/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/vi_VN/include/ctrnand-datayeet.txt b/_pages/vi_VN/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..6749b1d1bc
--- /dev/null
+++ b/_pages/vi_VN/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. Power off your device
+1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+1. Navigate to `[0:] SDCARD` -> `gm9`
+1. Press (X) on the CTRTransfer image `.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. Select "Copy to 0:/gm9/out"
+1. Press (A) to continue
+1. While still highlighting `00010017`, press (X) to delete it
+1. Press (A) to confirm
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. Press (A) to relock write permissions if prompted
+1. Press (Start) to reboot your device
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/vi_VN/include/exploit-usm.txt b/_pages/vi_VN/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/vi_VN/include/exploit-usm.txt
+++ b/_pages/vi_VN/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/vi_VN/include/rmproxy.txt b/_pages/vi_VN/include/rmproxy.txt
new file mode 100644
index 0000000000..d3d48ae55d
--- /dev/null
+++ b/_pages/vi_VN/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Power off your device
diff --git a/_pages/vi_VN/include/safemodecheck.txt b/_pages/vi_VN/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/vi_VN/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/vi_VN/include/sysupdate.txt b/_pages/vi_VN/include/sysupdate.txt
new file mode 100644
index 0000000000..e99a9ec9b9
--- /dev/null
+++ b/_pages/vi_VN/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+{%- if include.cfw == "true" %}
+ + Updates while using B9S + Luma (what you have) are safe
+{%- endif %}
+ + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/vi_VN/installing-boot9strap-(frogtool).txt b/_pages/vi_VN/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..ddfc6a7304
--- /dev/null
+++ b/_pages/vi_VN/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### What You Need
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### Section I - CFW Check
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### Section II - Prep Work
+
+1. Power off your device
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. Power off your device
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt b/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt
index 9acbf61933..128bf6c889 100644
--- a/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. Power on your device
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### Section II - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### Section III - Installing boot9strap
diff --git a/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt b/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt
index c447eea886..9c3266e7f3 100644
--- a/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ In order to follow these instructions, you will need the following:
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both devices
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### What You Need
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)
-#### Section I - Prep Work (source 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### Section II - Prep Work (target 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### Section III - kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### Section IV - unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### Section V - Installing boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/vi_VN/installing-boot9strap-(safecerthax).txt b/_pages/vi_VN/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..075e190486
--- /dev/null
+++ b/_pages/vi_VN/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### Compatibility Notes
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### Instructions
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### Section II - Prep Work
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. Power off your device
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### Section V - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/vi_VN/installing-boot9strap-(ssloth-browser).txt b/_pages/vi_VN/installing-boot9strap-(ssloth-browser).txt
index bfd7771226..e5beafbea0 100644
--- a/_pages/vi_VN/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/vi_VN/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### Section III - Launching SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### Section V - Restoring default proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Power off your device
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/vi_VN/installing-boot9strap-(usm).txt b/_pages/vi_VN/installing-boot9strap-(usm).txt
index 6f9a1eb70c..4e326ff6d3 100644
--- a/_pages/vi_VN/installing-boot9strap-(usm).txt
+++ b/_pages/vi_VN/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### Section III - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### Section IV - Installing boot9strap
diff --git a/_pages/vi_VN/region-changing.txt b/_pages/vi_VN/region-changing.txt
index 9af30fe4b5..413fdb3c10 100644
--- a/_pages/vi_VN/region-changing.txt
+++ b/_pages/vi_VN/region-changing.txt
@@ -6,11 +6,15 @@ title: "Region Changing"
### Required Reading
-This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0).
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-You MUST have already installed Luma3DS and boot9strap to use this.
-{: .notice--danger}
-
-Performing a region change may break extended memory mode games (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon) on Old 3DS/2DS devices. If this occurs, you will need to format the device (using TinyFormat or System Settings) to fix the issue.
-{: .notice--warning}
-
### What You Need
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Region settings
+#### Section VI - Deleting system save data
-1. Launch the System Settings
-1. Go to "Other Settings", "Profile", then "Region Settings"
-1. Select a country from the region you switched to
-1. If prompted, you do not need to set a state
-
-#### Section VII - Remove CTRTransfer image
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/vi_VN/site-navigation.txt b/_pages/vi_VN/site-navigation.txt
index 40ef6b75b6..a2135747ab 100644
--- a/_pages/vi_VN/site-navigation.txt
+++ b/_pages/vi_VN/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [Checking for CFW](checking-for-cfw)
+ [Contribute](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
* [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
diff --git a/_pages/vi_VN/troubleshooting.txt b/_pages/vi_VN/troubleshooting.txt
index c8f2789ae4..4f46f113bb 100644
--- a/_pages/vi_VN/troubleshooting.txt
+++ b/_pages/vi_VN/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ If this is unsuccessful, try using another SD card.
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
+
+{% endcapture %}
+{{ compat | markdownify }}
## Finalizing Setup
diff --git a/_pages/zh_CN/bannerbomb3.txt b/_pages/zh_CN/bannerbomb3.txt
index 08e4b0d635..880d5fe2f2 100644
--- a/_pages/zh_CN/bannerbomb3.txt
+++ b/_pages/zh_CN/bannerbomb3.txt
@@ -26,7 +26,7 @@ title: "BannerBomb3"
### 你需要准备点啥？
-* 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件
+* Your `movable.sed` file from completing Seedminer or nimhax
#### 第一步 – 准备工作
@@ -58,11 +58,7 @@ title: "BannerBomb3"
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. 将你的主机置于关机状态，按住 L + R + ↑ + A 四个按键，然后按下电源键
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + 主机将关机
- + 如果主机启动到了主菜单，则请关机
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/zh_CN/ctrtransfer.txt b/_pages/zh_CN/ctrtransfer.txt
index 51e663170e..95c32fb2dc 100644
--- a/_pages/zh_CN/ctrtransfer.txt
+++ b/_pages/zh_CN/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRtransfer"
这是个为主机安装 11.15.0 CTRtransfer 镜像的附加章节。
-请注意，如果你的 SD 卡中的 `/luma/payloads/` 目录中有 `GodMode9.firm` 以外的 `.firm` 文件，那么你在按住 “Start” 键开机的时候，你的主机将不会直接进入到 Godmode9，而会进入到一个叫做 “chainloader menu” 的菜单，这个时候你需要通过十字键来移动红色光标至 “Godmode9” 来启动教程需要的文件。
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-在开始之前，你必须确认你已装好了 Luma3DS 和 boot9strap。
-{: .notice--danger}
-
-做 CTRTransfer 可能会破坏旧版 3DS/2DS 的内存扩展模式（这会导致怪物猎人、任天堂大乱斗和宝可梦日月系列等等游戏无法启动） 如果出现了这个问题，则你得初始化主机（使用 TinyFormat 或者系统设置内的主机初始化）来解决它。
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### 你需要准备点啥？
-你需要一个支持 BT 协议的下载程序，如 [qBittorrent](https://www.qbittorrent.org/download.php) 或 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 来下载本教程中的[磁力链接](https://zh.wikipedia.org/wiki/%E7%A3%81%E5%8A%9B%E9%93%BE%E6%8E%A5) 。
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* 最新版本的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)（下载 GodMode9 `.zip` 文件）
@@ -55,9 +53,9 @@ title: "CTRtransfer"
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### 第五步 – 删除 CTR转移(CTRtransfer) 镜像
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/zh_CN/dumping-movable-(nimhax).txt b/_pages/zh_CN/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..0d93c35fdc
--- /dev/null
+++ b/_pages/zh_CN/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="目录内容" %}
+
+{% capture technical_info %}
+技术细节（选看）
+
+为了在你的主机上安装 boot9strap，我们需要获得你主机上的唯一加密密钥。 To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### 你需要准备点啥？
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### 操作步骤
+
+#### 第一步 – 准备工作
+
+1. 将主机关机
+1. 将你的 SD 卡插入到电脑
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. 将 SD 卡重新插入你的主机
+1. 启动你的主机
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+继续至 [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/zh_CN/finalizing-setup.txt b/_pages/zh_CN/finalizing-setup.txt
index b36e019505..92fc68d451 100644
--- a/_pages/zh_CN/finalizing-setup.txt
+++ b/_pages/zh_CN/finalizing-setup.txt
@@ -31,7 +31,7 @@ boot9strap 将会在 NAND 里的内容加载完成后启动 `boot.firm` 文件
### 你需要准备点啥？
* 最新版本的 [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) **（下载 `.cia` 文件）**
-* v3.7.4 版本的 [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) **（下载 `.cia` 文件）**
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* 最新版本的 [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)（下载 `.cia` 后缀的文件）
* 最新版本的 [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) **（下载 `.cia` 文件）**
* 最新版本的 [FBI](https://github.com/Steveice10/FBI/releases/latest)**（下载 `.cia` 和 `.3dsx` 后缀的文件）**
@@ -70,11 +70,7 @@ boot9strap 将会在 NAND 里的内容加载完成后启动 `boot.firm` 文件
本节中，你将会把主机更新至最新版本。（自制固件兼容最新版本的系统，直接升级是安全的）
-1. 进入 “系统设置(System Settings)”，接着点击“其他设置(Other Settings)”，然后移动到最右边，点击“系统升级(System Update)”来升级你的主机
- + 你使用 B9S 和 Luma 时升级系统是安全的
- + 更新程序可能会提示“你的系统已经是最新了”而不会继续更新 如果你已经更新到了最新，这是正常的；请继续下一节
- + 如果在更新中途出错，请将主机连接的网络的 DNS 设置和代理设置改为 “auto（自动）”
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### 第三步 – 进入 Homebrew Launcher
@@ -142,7 +138,7 @@ boot9strap 将会在 NAND 里的内容加载完成后启动 `boot.firm` 文件
+ 此过程将花费一些时间
+ If you get an error, look for your issue in the [troubleshooting guide](troubleshooting#finalizing-setup)
1. 按 “A” 键继续
-1. 按下 “B” 键返回到主菜单
+1. 按 “B” 键返回到主菜单
1. 选择 “Exit”
1. 如果提示重新锁定写入权限，按下 “A” 键来确认
1. 进入到 `[S:] SYSNAND VIRTUAL`
diff --git a/_pages/zh_CN/get-started.txt b/_pages/zh_CN/get-started.txt
index 338a309c22..22a2b8fea1 100644
--- a/_pages/zh_CN/get-started.txt
+++ b/_pages/zh_CN/get-started.txt
@@ -25,6 +25,10 @@ title: "新手入门"
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### 其他方法
diff --git a/_pages/zh_CN/homebrew-launcher-(super-skaterhax).txt b/_pages/zh_CN/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..596ed9bdfa
--- /dev/null
+++ b/_pages/zh_CN/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="目录内容" %}
+
+{% capture technical_info %}
+技术细节（选看）
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### 兼容性注意
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### 你需要准备点啥？
+
+* 最新版本的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)（下载 Luma3DS `.zip` 文件）
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### 第二步 – 准备工作
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. 将主机关机
+1. 将你的 SD 卡插入到电脑
+1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
+ + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. 将 SD 卡重新插入你的主机
+1. 启动你的主机
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + 如果你收到了安全证书警告，请按 A 允许连接
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. 按 “A” 键继续
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. 将主机关机
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/zh_CN/include/addproxy.txt b/_pages/zh_CN/include/addproxy.txt
new file mode 100644
index 0000000000..3d56df45ae
--- /dev/null
+++ b/_pages/zh_CN/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. 打开系统设置（本体設定 / System Settings）
+1. 进入到 `互联网设置（インターネット設定 / Internet Settings）` -> `连接设置（インターネット接続設定 / Connection Settings）`
+1. 点击你目前在用的连接点槽位，然后进入到 `设置变更（設定変更 / Change Settings）` -> `下一页（右箭头）` -> `代理设置（Proxy）`
+1. 设置“代理服务器 （Proxy）”为“是（する / Yes）”，然后点击`详细设置（詳細設定 / Detailed Setup）`
+1. 设置代理服务器为 `192.9.234.11`，端口为 `8080`
+1. 点击 OK，然后点击保存（保存する / Save）
+1. 当提示时，点击“测试（テスト / Test）”进行连接测试
+ + 测试应该会成功
+1. 点击 “OK” 继续
diff --git a/_pages/zh_CN/include/ctrnand-datayeet.txt b/_pages/zh_CN/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..f7e3631b27
--- /dev/null
+++ b/_pages/zh_CN/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. 将主机关机
+1. 按住 “START” 键，然后将主机开机。 这会启动 GodMode9
+1. 进入到 `[0:] SDCARD` -> `gm9`
+1. 在 CTRTransfer `.bin` 上按 “X” 来删除它
+1. 按下 “A” 键确认
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. 选择 “Copy to 0:/gm9/out”
+1. 按 “A” 键继续
+1. While still highlighting `00010017`, press (X) to delete it
+1. 按下 “A” 键确认
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. 如果提示重新锁定写入权限，按下 “A” 键来确认
+1. 按 “Start” 键重启你的主机
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/zh_CN/include/exploit-usm.txt b/_pages/zh_CN/include/exploit-usm.txt
index ab7129187b..c45a20d069 100644
--- a/_pages/zh_CN/include/exploit-usm.txt
+++ b/_pages/zh_CN/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. 将你的主机置于关机状态，按住 L + R + ↑ + A 四个按键，然后按下电源键
+ 按住这几个键，直到主机进入安全模式（一个“系统更新”菜单）
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/zh_CN/include/rmproxy.txt b/_pages/zh_CN/include/rmproxy.txt
new file mode 100644
index 0000000000..1e822e4e81
--- /dev/null
+++ b/_pages/zh_CN/include/rmproxy.txt
@@ -0,0 +1,10 @@
+本节中，你将会还原你主机的网络设置到原先的状态。
+
+1. 打开系统设置（本体設定 / System Settings）
+1. 进入到 `互联网设置（インターネット設定 / Internet Settings）` -> `连接设置（インターネット接続設定 / Connection Settings）`
+1. 点击你目前在用的连接点槽位，然后进入到 `设置变更（設定変更 / Change Settings）` -> `下一页（右箭头）` -> `代理设置（Proxy）`
+1. 将 “代理设置（Proxy）”设置为 “否（No/しない）”
+1. 点击 OK，然后点击保存（保存する / Save）
+1. 当提示时，点击“测试（テスト / Test）”进行连接测试
+ + 测试应该会成功
+1. 将主机关机
diff --git a/_pages/zh_CN/include/safemodecheck.txt b/_pages/zh_CN/include/safemodecheck.txt
new file mode 100644
index 0000000000..51779e85a4
--- /dev/null
+++ b/_pages/zh_CN/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. 将你的主机置于关机状态，按住 L + R + ↑ + A 四个按键，然后按下电源键
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + 主机将关机
+ + 如果主机启动到了主菜单，则请关机
diff --git a/_pages/zh_CN/include/sysupdate.txt b/_pages/zh_CN/include/sysupdate.txt
new file mode 100644
index 0000000000..37134b9d13
--- /dev/null
+++ b/_pages/zh_CN/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. 进入 “系统设置(System Settings)”，接着点击“其他设置(Other Settings)”，然后移动到最右边，点击“系统升级(System Update)”来升级你的主机
+{%- if include.cfw == "true" %}
+ + 你使用 B9S 和 Luma 时升级系统是安全的
+{%- endif %}
+ + 更新程序可能会提示“你的系统已经是最新了”而不会继续更新 This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/zh_CN/installing-boot9strap-(frogtool).txt b/_pages/zh_CN/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..e0bbf057ec
--- /dev/null
+++ b/_pages/zh_CN/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="目录内容" %}
+
+{% capture technical_info %}
+技术细节（选看）
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### 你需要准备点啥？
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### 第一步 – 检查自制固件
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### 第二步 – 准备工作
+
+1. 将主机关机
+1. 将你的 SD 卡插入到电脑
+1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. 将 SD 卡重新插入你的主机
+1. 启动你的主机
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. 如果漏洞执行成功，你的主机将进入到日版的“うごくメモ帳 (Flipnote Studio)”
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### 第四部分 — 配置 Luma3DS
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### 第七步 – 还原 “DS 连接设置（DS Connection Settings）”
+
+1. 运行“下载通信（Download Play）”程序
+1. 等到你看到两个按钮
+ + Do not press either of the buttons
+1. 同时按下 “L” + “↓” + “Select” 键来打开 Rosalina 菜单
+1. 选择 “Miscellaneous options”
+1. 选择 “Switch the hb. title to the current app.”
+1. 按 “B” 键继续
+1. 按 “B” 键返回 Rosalina 主菜单
+1. 按 “B” 键退出 Rosalina 菜单
+1. 按下 “Home” 键，然后关闭“下载通信(Download Play)”
+1. Relaunch the Download Play application
+1. 此时你的主机应该会启动 Homebrew Launcher了
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. 将主机关机
+
+___
+
+### 继续至[完成安装](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt b/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt
index c3b2ef97fe..73042ed3df 100644
--- a/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ title: "安装 boot9strap（通过 HBL-USM）"
在本节中，你将会使用 Homebrew Launcher 来启动 slotTool，它将会把带有漏洞的数据覆盖到你主机的 Wi-Fi 连接点槽中。 然后，你需要把触发 unSAFE_MODE 漏洞所需的文件复制到设备的 SD 卡上。 你自己设置的 Wi-Fi 链接点将在这个过程中被暂时覆盖。
-1. 你的主机现在应该在本教程的前一部分打开了 Homebrew Launcher 了
- + 如果没有，则请开机然后通过先前使用的一种方法进入它（比如通过《宝可梦：绘图方块》）
+1. 启动你的主机
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. 从自制程序列表中找到并启动 slotTool
+ 如果你的主机卡在了红屏，请长按住电源键来强制关机，然后重试本步骤
1. 选择 “INSTALL exploit to wifi slots 1,2,3 & shutdown” 选项
@@ -56,7 +56,7 @@ title: "安装 boot9strap（通过 HBL-USM）"
#### 第二步 – unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### 第三步 – 安装 boot9strap
diff --git a/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt b/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt
index 20e0408f71..f862343e8b 100644
--- a/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ title: "安装 boot9strap（通过 kartdlphax）"
- 一份与两台主机同区的马里奥赛车 7 实体版或数字版
- 两张 SD 卡
-如果**目标 3DS** 的 L、R、↑、A 其中一个按键坏了，则你会卡在需要用到这些按键的步骤上。 如需针对此问题的帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。
-{: .notice--warning}
-
### 你需要准备点啥？
在**源 3DS**（已安装自制固件的 3DS）上操作以下步骤：
* 最新版本的 [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest)（下载 `plugin.3gx`）
-* 最新版本的 [Luma3DS 3GX Loader 修改版](https://github.com/Nanquitas/Luma3DS/releases/latest)（下载 `boot.firm`）
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
在**目标 3DS**（你试图破解的 3DS）上：
@@ -47,7 +44,14 @@ title: "安装 boot9strap（通过 kartdlphax）"
* 最新版本的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)（下载 Luma3DS `.zip` 文件）
* 最新版本的 [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)（下载 RELEASE `.zip` 文件）
-#### 第一步 – 准备工作（源 3DS）
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
为了向目标 3DS 传输带有漏洞的数据，你将需要按照以下内容配置源 3DS（已安装了自制固件的 3DS）。
@@ -61,7 +65,7 @@ title: "安装 boot9strap（通过 kartdlphax）"
如果 `plugins` 和 `00040000...` 文件夹不存在，请先创建它们
1. 弹出 SD 卡并将其插回**源 3DS**
-#### 第二步 – 准备工作（目标 3DS）
+#### Section III - Prep Work (target 3DS)
为了修改目标 3DS（你正在破解的 3DS），你需要复制一些文件到目标 3DS 的 SD 卡中。
@@ -75,7 +79,7 @@ title: "安装 boot9strap（通过 kartdlphax）"
1. 从 unSAFE_MODE `.zip` 中复制出 `slotTool` 文件夹到你的 SD 卡的 `3ds` 文件夹
1. 取下 SD 卡并将其插回**目标 3DS**
-#### 第三步 – kartdlphax
+#### Section IV - kartdlphax
本节中，你将使用下载通信程序来从源 3DS 传输带有漏洞的数据到目标 3DS，它将会用带有漏洞的数据覆盖你的 Wi-Fi 连接点设置槽。 你自己设置的 Wi-Fi 链接点将在这个过程中被暂时覆盖。
@@ -111,18 +115,18 @@ title: "安装 boot9strap（通过 kartdlphax）"
接下来的步骤中将**不再**需要使用**源 3DS** 来完成。 接下来的步骤应该只能在**目标 3DS**上完成。
{: .notice--info}
-#### 第四步 – unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### 第五步 – 安装 boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### 第六步 – 还原 WiFi 配置文件
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/zh_CN/installing-boot9strap-(safecerthax).txt b/_pages/zh_CN/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..a98bcf8377
--- /dev/null
+++ b/_pages/zh_CN/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="目录内容" %}
+
+{% capture technical_info %}
+技术细节（选看）
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### 兼容性注意
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### 你需要准备点啥？
+
+* 最新版本的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip)（直链）
+* 最新版本的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)（直链）
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### 操作步骤
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### 第二步 – 准备工作
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. 将你的 SD 卡插入到电脑
+1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
+ + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
+1. 在 SD 卡根目录创建一个名为 `boot9strap` 的文件夹
+1. 从boot9strap `.zip` 文件中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你SD卡的 `/boot9strap/` 文件夹中
+1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.bin` 到 SD 卡根目录下
+1. 将 SD 卡重新插入你的主机
+1. 启动你的主机
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. 将主机关机
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. 将你的主机置于关机状态，按住 L + R + ↑ + A 四个按键，然后按下电源键
+ + 按住这几个键，直到主机进入安全模式（一个“系统更新”菜单）
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. 如果一切成功的话，你将自动进入 SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### 第五步 – 安装 boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### 继续至[完成安装](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt b/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt
index b2bc2058f0..0ea42933c9 100644
--- a/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ SSLoth 允许目前系统版本在 11.13.0 及其以下的主机绕过浏览器
本节中，你将更改主机的网络连接设置，设置一个代理服务器来绕过浏览器的版本检查，允许浏览器在系统没有更新至最新的情况下运行。 这将让你能够在下一步中访问浏览器漏洞页面。
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. 打开系统设置（本体設定 / System Settings）
-1. 进入到 `互联网设置（インターネット設定 / Internet Settings）` -> `连接设置（インターネット接続設定 / Connection Settings）`
-1. 点击你目前在用的连接点槽位，然后进入到 `设置变更（設定変更 / Change Settings）` -> `下一页（右箭头）` -> `代理设置（Proxy）`
-1. 设置“代理服务器 （Proxy）”为“是（する / Yes）”，然后点击`详细设置（詳細設定 / Detailed Setup）`
-1. 设置代理服务器为 `192.9.234.11`，端口为 `8080`
-1. 点击 OK，然后点击保存（保存する / Save）
-1. 当提示时，点击“测试（テスト / Test）”进行连接测试
- + 测试应该会成功
-1. 点击 “OK” 继续
+{% include_relative include/addproxy.txt %}
1. 点两次 “返回”，然后点“关闭”来返回主菜单。
#### 第三步 – 启动 SafeB9SInstaller
本节中，你将启动浏览器破解漏洞，它将使用 universal-otherapp 启动 boot9strap（自制固件）安装程序。
-1. 在主菜单中，同时按下 L 和 R 键来打开摄像头
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ 如果你无法打开摄像头，请直接进入 3DS 自带的浏览器然后输入链接访问（`https://zoogie.github.io/web/nbhax/`）
1. 扫描[这个二维码（点击这里查看）](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ 如果出现错误，参见[故障排查](troubleshooting#ts_browser)
@@ -88,16 +77,7 @@ If you haven't already, make sure you have a working Internet connection set up
#### 第五步 – 还原默认的 DNS
-本节中，你将会还原你主机的网络设置到原先的状态。
-
-1. 打开系统设置（本体設定 / System Settings）
-1. 进入到 `互联网设置（インターネット設定 / Internet Settings）` -> `连接设置（インターネット接続設定 / Connection Settings）`
-1. 点击你目前在用的连接点槽位，然后进入到 `设置变更（設定変更 / Change Settings）` -> `下一页（右箭头）` -> `代理设置（Proxy）`
-1. 将 “代理设置（Proxy）”设置为 “否（No/しない）”
-1. 点击 OK，然后点击保存（保存する / Save）
-1. 当提示时，点击“测试（テスト / Test）”进行连接测试
- + 测试应该会成功
-1. 将主机关机
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/zh_CN/installing-boot9strap-(usm).txt b/_pages/zh_CN/installing-boot9strap-(usm).txt
index 78f7836a64..13deac7345 100644
--- a/_pages/zh_CN/installing-boot9strap-(usm).txt
+++ b/_pages/zh_CN/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ title: "安装 boot9strap（通过 USM）"
#### 第三步 – unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### 第四步 – 安装 boot9strap
diff --git a/_pages/zh_CN/region-changing.txt b/_pages/zh_CN/region-changing.txt
index c8a8edd7be..640ccfd1a1 100644
--- a/_pages/zh_CN/region-changing.txt
+++ b/_pages/zh_CN/region-changing.txt
@@ -6,11 +6,15 @@ title: "区域变更"
### 重要事项
-本章节将介绍如何更改 SysNAND 的系统区域。 这是通过安装你想要切换到的地区的 11.15.0 CTRTransfer 镜像而达成的。 安装完镜像后，你可以正常更新主机到最新的系统版本（11.16.0）。
+This is an add-on section for region changing your device. 这是通过安装你想要切换到的地区的 11.15.0 CTRTransfer 镜像而达成的。 安装完镜像后，你可以正常更新主机到最新的系统版本（11.16.0）。
-注意，Luma3DS 本身就自带了[区域模拟](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)的功能，这使得变更区域几乎是不必要的。 顺带一提，你可以使用 [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases) 来运行其他区域的 NDS 游戏。
+注意，Luma3DS 本身就自带了[区域模拟](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)的功能，这使得变更区域几乎是不必要的。 顺带一提，你可以使用 [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases) 来运行其他区域的 NDS 游戏。 You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-请注意，如果你的 SD 卡中的 `/luma/payloads/` 目录中有 `GodMode9.firm` 以外的 `.firm` 文件，那么你在按住 “Start” 键开机的时候，你的主机将不会直接进入到 Godmode9，而会进入到一个叫做 “chainloader menu” 的菜单，这个时候你需要通过十字键来移动红色光标至 “Godmode9” 来启动教程需要的文件。
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
如果你选择变更主机的区域：
@@ -18,20 +22,16 @@ title: "区域变更"
+ 如果你登录了一个 NNID，操作后将无法继续使用此 NNID。 NNID 在创建时即被锁定在它的创建区域。
+ 主机将无法访问 eShop，即使是[删除你的 eShop 账户](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) 这是因为 3DS 中的某些应用会在进入时绑定使用区域（特别是 New 3DS 上）。
+ While purchases can no longer be made on eShop, game updates can still be downloaded. 联机通常需要将游戏更新至最新。
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ 如果你以后打算卸载自制固件，则你**必须**还原你在变更前的 NAND 备份。**区域变更后的主机无法卸载自制固件，否则主机会变砖！**
{% endcapture %}
{{ notice-6 | markdownify }}
-在开始之前，你必须确认你已装好了 Luma3DS 和 boot9strap。
-{: .notice--danger}
-
-区域变更可能会破坏旧版 3DS/2DS 的内存扩展模式（这会导致怪物猎人、任天堂大乱斗和宝可梦日月系列等等的游戏无法启动）。 如果出现了这个问题，则你得初始化主机（使用 TinyFormat 或者系统设置内的主机初始化）来解决它。
-{: .notice--warning}
-
### 你需要准备点啥？
-你需要一个支持 BT 协议的下载程序，如 [qBittorrent](https://www.qbittorrent.org/download.php) 或 [Deluge](http://dev.deluge-torrent.org/wiki/Download) 来下载本教程中的[磁力链接](https://zh.wikipedia.org/wiki/%E7%A3%81%E5%8A%9B%E9%93%BE%E6%8E%A5) 。
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* 最新版本的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)（下载 GodMode9 `.zip` 文件）
@@ -45,7 +45,7 @@ title: "区域变更"
+ - [旧版 3DS 或 2DS - 11.15.0 - 神游版 - CTRTransfer](magnet:?xt=urn:btih:f71d2379e577db22d7f14a656bca7bf2eb5243f8&xt=urn:btmh:12200c6ee93f63deef8ce9023b8214ca36cd29c37d2726acf7a15594256409f6629b&dn=11.15.0-4C_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [旧版 3DS 或 2DS - 11.15.0 - 欧版 - CTRTransfer](magnet:?xt=urn:btih:fc71540a99c884ab8a4211192d3af92c7ffb9372&xt=urn:btmh:12203c317846d43110fd3a35cedf427cb5fdd58ac764316f4d0634181efbb762ee92&dn=11.15.0-47E_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [旧版 3DS 或 2DS - 11.15.0 - 日版 - CTRTransfer](magnet:?xt=urn:btih:7b88adf3f47d036bcdee987f6597770eaafdd8dd&xt=urn:btmh:1220f39be6c14438b07ebdf120161215088d56c59608d5f34f0744d972c7a0cf7ca2&dn=11.15.0-47J_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
- + - [旧版 3DS 或 2DS - 11.15.0 - 韩版 - CTRTransfer](magnet:?xt=urn:btih:90d6689106751b057616d32445442fc1b7370e38&xt=urn:btmh:1220a08fe569ac1596f6a113730de3cc7aa0dfd6858d40830cc0f0cee07bf585fd93&dn=11.15.0-41K_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ + - [旧版 3DS 或 2DS - 11.15.0 - 韩版 - CTRTransfer](magnet:?xt=urn:btih:90d6689106751b057616d32445442fc1b7370e38&xt=urn:btmh:1220a08fe569ac1596f6a113730de3cc7aa0dfd6858d40830cc0f0cee07bf585fd93&dn=11.15.0-41K_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [旧版 3DS 或 2DS - 11.15.0 - 港台版 - CTRTransfer](magnet:?xt=urn:btih:19f978d42b0d9590bc742d7598efa45091567cee&xt=urn:btmh:12204429bc94456825530a2dff233ed399a292e1004a64b65fa4b451a69e116cad2a&dn=11.15.0-39T_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
+ - [旧版 3DS 或 2DS - 11.15.0 - 美版 - CTRTransfer](magnet:?xt=urn:btih:fd39778d4116a210c3116c014521120f0e7b9e1d&xt=urn:btmh:12203a51aca201f0635eecb15645cd4598bd49b1ad354e1ea81c24eb488760f3bd2b&dn=11.15.0-47U_ctrtransfer_o3ds.zip&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.dler.org%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.bitsearch.to%3a1337%2fannounce&tr=udp%3a%2f%2ftracker-udp.gbitt.info%3a80%2fannounce&tr=udp%3a%2f%2fretracker.netbynet.ru%3a2710%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fopentor.org%3a2710%2fannounce&tr=udp%3a%2f%2fopen.stealth.si%3a80%2fannounce&tr=udp%3a%2f%2fmts.tvbit.co%3a6969%2fannounce&tr=udp%3a%2f%2fexplodie.org%3a6969%2fannounce&tr=udp%3a%2f%2fbt2.archive.org%3a6969%2fannounce)
@@ -72,15 +72,11 @@ title: "区域变更"
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### 第六步 – 区域设置
+#### Section VI - Deleting system save data
-1. 启动“系统设置（System Settings）”
-1. 选择“其他设置（Other Settings）”，然后点击“个人资料（Profile）”，然后“区域设置（Region Settings）”
-1. 选择你变更区域后的国家
-1. 如果出现提示，州（state）的部分无需设置
-
-#### 第七步 – 删除 CTRTransfer 镜像
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/zh_CN/site-navigation.txt b/_pages/zh_CN/site-navigation.txt
index 60d1247db4..30c5688724 100644
--- a/_pages/zh_CN/site-navigation.txt
+++ b/_pages/zh_CN/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [检查自制固件](checking-for-cfw)
+ [贡献](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [导出应用和游戏卡带](dumping-titles-and-game-cartridges)
+ [F3（Linux）](f3-(linux))
+ [F3X（Mac）](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [如何使用 GodMode9](godmode9-usage)
+ [H2testw（Windows）](h2testw-(windows))
+ [首页](/zh_CN/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [安装 boot9strap（通过 Fredtool）](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [安装 boot9strap（通过拆机硬改）](installing-boot9strap-(hardmod))
+ [安装 boot9strap（通过 HBL-USM）](installing-boot9strap-(hbl-usm))
* [安装 boot9strap（通过 ntrboothax）](installing-boot9strap-(kartdlphax))
+ [安装 boot9strap（通过 ntrboot）](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [安装 boot9strap（通过 Soundhax）](installing-boot9strap-(soundhax))
+ [安装 boot9strap（SSLoth-浏览器）](installing-boot9strap-(ssloth-browser))
+ [安装 boot9strap（通过 USM）](installing-boot9strap-(usm))
diff --git a/_pages/zh_CN/troubleshooting.txt b/_pages/zh_CN/troubleshooting.txt
index 9d590ec751..86a37f4ecc 100644
--- a/_pages/zh_CN/troubleshooting.txt
+++ b/_pages/zh_CN/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -421,6 +422,31 @@ If these methods didn't work (or do not apply to you), update your device to the
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+这可能代表着你的主机已经安装过了自制固件。 你应该[检查一下](checking-for-cfw)。
+
+{% endcapture %}
+{{ compat | markdownify }}
## 完成安装
@@ -636,7 +662,7 @@ If you weren't able to find your error or the instructions didn't work, join [Ni
{% capture compat %}
Clear HOME Menu extdata
-1. 关闭你的主机的电源
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 打开你 SD 卡的 `/Nintendo 3DS///extdata/00000000/` 文件夹
1. 删除对应你的 3DS 区域的文件夹：
diff --git a/_pages/zh_TW/bannerbomb3.txt b/_pages/zh_TW/bannerbomb3.txt
index cafc8dc683..9e7228171c 100644
--- a/_pages/zh_TW/bannerbomb3.txt
+++ b/_pages/zh_TW/bannerbomb3.txt
@@ -26,7 +26,7 @@ For a more technical explanation, see [here](https://github.com/zoogie/Bannerbom
### 必備項目
-* 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案
+* Your `movable.sed` file from completing Seedminer or nimhax
#### 第一節 — 準備工作
@@ -58,11 +58,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will see whether you can access Safe Mode on your device. This will determine which method you will follow on the next page.
-1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
- + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
-1. If you see the system update screen, press Cancel
- + Your device will power off
- + If the device boots to the HOME Menu, just power off your device
+{% include_relative include/safemodecheck.txt %}
___
diff --git a/_pages/zh_TW/ctrtransfer.txt b/_pages/zh_TW/ctrtransfer.txt
index 943b0574f0..32e2b91615 100644
--- a/_pages/zh_TW/ctrtransfer.txt
+++ b/_pages/zh_TW/ctrtransfer.txt
@@ -8,17 +8,15 @@ title: "CTRTransfer"
本篇為用來安裝 11.15.0 CTRTransfer 鏡像檔至您主機上的附加章節。
-請注意，如果您在 SD 卡中的 `/luma/payloads/` 資料夾中放有除了 `GodMode9.firm` 的 payload 檔案，在開機時按住『Start』鍵將會顯示一個『加載選單』，從那裏您得透過方向鍵及按鈕『A』選擇『GodMode9』。
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
-您必須先安裝 Luma3DS 和 boot9strap 才能繼續。
-{: .notice--danger}
-
-請注意，在舊 3DS 及 舊 2DS 主機上進行 CTRTransfer，可能會導致需使用擴充記憶體模式的遊戲無法正常運作 (如魔物獵人、超級瑪利歐、精靈寶可夢月亮/太陽)。 若遇到此情形時，您必須重新格式化您的主機以修正此問題 (透過 TinyFormat 或系統設定)。
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
{: .notice--warning}
### 必備項目
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (選擇 GodMode9 `.zip` 檔案)
@@ -55,9 +53,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### 第五節 — 移除 CTRTransfer 鏡像檔
+#### Section VI - Deleting system save data
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
diff --git a/_pages/zh_TW/dumping-movable-(nimhax).txt b/_pages/zh_TW/dumping-movable-(nimhax).txt
new file mode 100644
index 0000000000..928ae1ae7f
--- /dev/null
+++ b/_pages/zh_TW/dumping-movable-(nimhax).txt
@@ -0,0 +1,53 @@
+---
+title: "Dumping Movable (nimhax)"
+---
+
+{% include toc title="條目內容" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use the Homebrew Launcher to launch nimhax and dump the data encryption key (movable.sed) from your device.
+
+For a more technical explanation, see [here](https://github.com/luigoalma/nimhax/) for information about the nimhax exploit.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### 必備項目
+
+* The latest release of [nimhax](https://github.com/luigoalma/nimhax/releases/latest) (the nimhax `.zip` file)
+
+### 操作說明
+
+#### 第一節 — 準備工作
+
+1. 關閉您的主機
+1. 將 SD 卡插入至電腦中
+1. Copy the `nimhax` folder from the nimhax `.zip` to the `/3ds/` folder on your SD card
+1. 將 SD 卡插回主機中
+1. 啟動您的主機
+
+#### Section II - nimhax
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch nimhax from the list of homebrew
+1. If the exploit was successful, a `movable.sed` file will appear on the root of your SD card
+
+### Next step: Choose an exploit
+
+#### Bannerbomb3 (recommended)
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with BannerBomb3, which uses your `movable.sed` file to take advantage of exploits in the System Settings application.
+
+Continue to [BannerBomb3](bannerbomb3)
+{: .notice--info}
+
+#### Frogtool
+
+Once you have your device's encryption key (`movable.sed`), you can use it in conjunction with Frogtool, which uses your `movable.sed` file to inject and take advantage of JPN Flipnote Studio. \
+While this method is faster, it requires downloading a file with a torrent client. Do not follow this method if you're unable to use a torrent client.
+
+Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+{: .notice--warning}
diff --git a/_pages/zh_TW/finalizing-setup.txt b/_pages/zh_TW/finalizing-setup.txt
index 7a0e6fedb8..2adcc48940 100644
--- a/_pages/zh_TW/finalizing-setup.txt
+++ b/_pages/zh_TW/finalizing-setup.txt
@@ -31,7 +31,7 @@ If your **New 3DS** was on version 2.1.0 before following this guide, you should
### 必備項目
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
+* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
@@ -70,11 +70,7 @@ The screenshots below indicate the minimum SD card layout that is required to fo
In this section, you will update your system to the latest version, which is safe to do with custom firmware.
-1. 到主機主選單中更新您的主機，到『系統設置 (System Settings)』、『其他設置 (Other Settings)』底下選擇『系統更新 (System Update)』
- + 在安裝 B9S + Luma 後，進行系統更新是很安全的
- + 升級程式可能會告訴你『你的主機已經是最新系统了』而不是繼續升級 如您已經升級到了最新的話，這是正常的；請繼續下面的步驟
- + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
- + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{% include_relative include/sysupdate.txt cfw="true" %}
#### 第三節 — Homebrew Launcher
diff --git a/_pages/zh_TW/get-started.txt b/_pages/zh_TW/get-started.txt
index 030b24a516..57357f03b5 100644
--- a/_pages/zh_TW/get-started.txt
+++ b/_pages/zh_TW/get-started.txt
@@ -25,6 +25,10 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr
To find the correct method for your device, please enter the system version you found in Section II.
+{% capture noneSelected %}
+System model is required.
+{% endcapture %}
+
{% capture invalidVersion %}
This doesn't seem to be a valid system version.
{% endcapture %}
@@ -33,7 +37,7 @@ This doesn't seem to be a valid system version.
You currently cannot hack your 3DS on this version using the main methods. If you want to hack your console, you have to use ntrboot.
{% endcapture %}
-{% include consoleVersionSelect.html invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
+{% include consoleVersionSelect.html noneSelected=noneSelected invalidVersion=invalidVersion methodUnavailable=methodUnavailable %}
---
#### 替代方式
diff --git a/_pages/zh_TW/homebrew-launcher-(super-skaterhax).txt b/_pages/zh_TW/homebrew-launcher-(super-skaterhax).txt
new file mode 100644
index 0000000000..262008e283
--- /dev/null
+++ b/_pages/zh_TW/homebrew-launcher-(super-skaterhax).txt
@@ -0,0 +1,86 @@
+---
+title: "Homebrew Launcher (super-skaterhax)"
+---
+
+{% include toc title="條目內容" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see [here](https://github.com/zoogie/super-skaterhax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### 相容性資訊
+
+Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions except TWN/CHN.
+
+The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+{: .notice--warning}
+
+### 必備項目
+
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+* The latest release of [super-skaterhax](https://github.com/zoogie/super-skaterhax/releases) (the release `.zip` file)
+
+#### Section I - Updating the System
+
+{% include_relative include/sysupdate.txt cfw="false" %}
+
+#### 第二節 — 準備工作
+
+In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+1. 關閉您的主機
+1. 將 SD 卡插入至電腦中
+1. 解壓 Luma3DS `.zip` 內的 `boot.firm` 及 `boot.3dsx` 到 SD 卡的根目錄底下
+ + 「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
+1. Copy everything inside the folder for your device's region in the super-skaterhax `.zip` to the root of your SD card
+1. 將 SD 卡插回主機中
+1. 啟動您的主機
+
+#### Section III - super-skaterhax
+
+In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+If you haven't already, make sure you have a working Internet connection set up on your device.
+{: .notice--info}
+
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/super/` for EUR/USA/JPN, `https://zoogie.github.io/web/korea` for KOR)
+1. Tap the QR code button and scan one of the following QR codes for your device's region [here](https://user-images.githubusercontent.com/28328903/226086338-585bfdac-0aac-44c0-b413-89206d2815d8.png)
+ + If you get a security certificate warning, press (A) to allow the connection
+1. Press the (Select) button to open the bookmark tab
+ + If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+1. Tap "Bookmark this page"
+1. Press (B) once to return to the browser
+1. Press (Start) to open the context menu
+ + If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+1. Tap on "Settings"
+1. Tap on "Delete Cookies"
+1. 按『A』 繼續
+1. Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+1. Select the "GO GO!" button on the top screen
+ + If any prompts appear, approve all of them
+ + If your device freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ + If your device freezes on a red screen, hold the POWER button until it turns off, redo step Step 3 of Section II, then retry this section
+ + If you get another error, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+1. If the exploit was successful, your device will have booted into the Homebrew Launcher
+1. 關閉您的主機
+
+#### Section IV - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+___
+
+### Next step: Choose an exploit
+
+If you saw the system update screen in the previous section, Safe Mode is working on your device.
+
+If your device booted into Safe Mode, continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
+
+If your device did NOT boot into Safe Mode, continue to [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+{: .notice--info}
diff --git a/_pages/zh_TW/include/addproxy.txt b/_pages/zh_TW/include/addproxy.txt
new file mode 100644
index 0000000000..d77ed5c1ba
--- /dev/null
+++ b/_pages/zh_TW/include/addproxy.txt
@@ -0,0 +1,12 @@
+If you haven't already, make sure you have a working Internet connection set up on your console.
+{: .notice--info}
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
+1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. Click "OK" to continue
diff --git a/_pages/zh_TW/include/ctrnand-datayeet.txt b/_pages/zh_TW/include/ctrnand-datayeet.txt
new file mode 100644
index 0000000000..4bdd5d6c88
--- /dev/null
+++ b/_pages/zh_TW/include/ctrnand-datayeet.txt
@@ -0,0 +1,21 @@
+1. 關閉您的主機
+1. 按下並按住「Start」鍵，按住按鈕的同時，將您的主機開機。 這將會啟動 GodMode9
+1. 移動至 `[0:] SDCARD` -> `gm9`
+1. 選擇 CTRTransfer `.bin` 鏡像檔，並按『X』刪除
+1. 按 『A』 確認
+1. Press (B) a few times to go back to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `data` -> `` -> `sysdata`
+ + The `` will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
+1. Use the D-Pad to highlight `00010017`
+1. Press (Right Shoulder) + (A) to bring up the folder options
+1. 選擇『Copy to 0:/gm9/out』
+1. 按『A』 繼續
+1. While still highlighting `00010017`, press (X) to delete it
+1. 按 『A』 確認
+1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
+1. Once the file has been deleted, press (A) to continue
+1. 如提示時，按下『A』取消檔案寫入鎖定
+1. 按下『Start』鍵重啟您的主機
+1. Your device will load into the initial setup menu
+ + This is expected behaviour. You have not lost any of your game data
+1. Complete the initial setup menu by following the prompts on your device's screen
diff --git a/_pages/zh_TW/include/exploit-usm.txt b/_pages/zh_TW/include/exploit-usm.txt
index d43de4ff40..a3008aead2 100644
--- a/_pages/zh_TW/include/exploit-usm.txt
+++ b/_pages/zh_TW/include/exploit-usm.txt
@@ -2,11 +2,6 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
-{%- if include.method == "hbl" or include.method == "kartdlphax" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- elsif include.method == "bb3" %}
- + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, you will need to follow [an alternate branch of BannerBomb3](installing-boot9strap-(fredtool)). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{%- endif %}
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
@@ -14,3 +9,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
+ + If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+ + If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
\ No newline at end of file
diff --git a/_pages/zh_TW/include/rmproxy.txt b/_pages/zh_TW/include/rmproxy.txt
new file mode 100644
index 0000000000..9531cd92f3
--- /dev/null
+++ b/_pages/zh_TW/include/rmproxy.txt
@@ -0,0 +1,10 @@
+In this section, you will restore the Internet settings back to normal.
+
+1. Launch the System Settings application
+1. Navigate to `Internet Settings` -> `Connection Settings`
+1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
+1. Set "Proxy Settings" to "No"
+1. Click OK, then click Save
+1. When prompted, click "Test" to perform the connection test
+ + The test should succeed
+1. 關閉您的主機
diff --git a/_pages/zh_TW/include/safemodecheck.txt b/_pages/zh_TW/include/safemodecheck.txt
new file mode 100644
index 0000000000..4664b02340
--- /dev/null
+++ b/_pages/zh_TW/include/safemodecheck.txt
@@ -0,0 +1,5 @@
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots to a system update screen (this is Safe Mode)
+1. If you see the system update screen, press Cancel
+ + Your device will power off
+ + If the device boots to the HOME Menu, just power off your device
diff --git a/_pages/zh_TW/include/sysupdate.txt b/_pages/zh_TW/include/sysupdate.txt
new file mode 100644
index 0000000000..075d6a947c
--- /dev/null
+++ b/_pages/zh_TW/include/sysupdate.txt
@@ -0,0 +1,9 @@
+1. 到主機主選單中更新您的主機，到『系統設置 (System Settings)』、『其他設置 (Other Settings)』底下選擇『系統更新 (System Update)』
+{%- if include.cfw == "true" %}
+ + 在安裝 B9S + Luma 後，進行系統更新是很安全的
+{%- endif %}
+ + 升級程式可能會告訴你『你的主機已經是最新系统了』而不是繼續升級 This is normal if you are already up to date; continue to the next section
+ + If this gives you an error, set both your DNS settings and Proxy settings to "Auto"
+{%- if include.cfw == "true" %}
+ + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)
+{%- endif %}
diff --git a/_pages/zh_TW/installing-boot9strap-(frogtool).txt b/_pages/zh_TW/installing-boot9strap-(frogtool).txt
new file mode 100644
index 0000000000..fd286bc006
--- /dev/null
+++ b/_pages/zh_TW/installing-boot9strap-(frogtool).txt
@@ -0,0 +1,87 @@
+---
+title: "Installing boot9strap (Frogtool)"
+---
+
+{% include toc title="條目內容" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
+If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
+{: .notice--warning}
+
+### 必備項目
+
+* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
+* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
+
+#### 第一節 — 檢查自製韌體
+
+{% include_relative include/cfw-check-fredtool.txt %}
+
+#### 第二節 — 準備工作
+
+1. 關閉您的主機
+1. 將 SD 卡插入至電腦中
+1. 解壓 Luma3DS `.zip` 內的 `boot.firm` 及 `boot.3dsx` 到 SD 卡的根目錄底下
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
+1. Copy `frogcert.bin` to the root of your SD card
+1. 將 SD 卡插回主機中
+1. 啟動您的主機
+
+#### Section III - Patching DS Download Play
+
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
+1. Launch Frogtool from the list of homebrew
+1. Select the "INJECT patched DS Download Play" option
+1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. Once this operation has finished, read the screens and check if the process was successful
+1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. 如果漏洞成功執行，您的主機將自動啟動『うごくメモ帳 (Flipnote Studio)』
+ + If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
+
+#### Section IV - Flipnote Exploit
+
+{% include_relative include/install-boot9strap-b9stool.txt method="dsinternet" %}
+
+#### Section VI - Luma3DS Configuration
+
+{% include_relative include/configure-luma3ds.txt onboot="true" %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VII - Restoring DS Connection Settings
+
+1. 啟動『下載通信 (Download Play)』程式
+1. 等到你看到兩個按鍵
+ + Do not press either of the buttons
+1. 同時按下『L』+『下』+『Select』鍵以啟動 Rosalina 選單
+1. 選擇『Miscellaneous options』
+1. 選擇『Switch the hb. title to the current app.』
+1. 按『B』繼續
+1. 按『B』回到 Rosalina 主選單
+1. 按『B』退出 Rosalina 選單
+1. 按『Home』鍵，並關閉『下載通信 (Download Play)』程式
+1. Relaunch the Download Play application
+1. 您的主機應該就會啟動 Homebrew Launcher 了
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+1. 關閉您的主機
+
+___
+
+### 繼續至[完成安裝](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt b/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt
index 42c9ded569..b433032073 100644
--- a/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt
@@ -35,8 +35,8 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nint
In this section, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Then, you will copy the files needed to trigger the unSAFE_MODE exploit onto your device's SD card. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
- + If not, power on your console and enter Homebrew Launcher through your method of choice (likely Pokémon Picross)
+1. 啟動您的主機
+1. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
@@ -56,7 +56,7 @@ In this section, you will use Homebrew Launcher to launch slotTool, which will o
#### 第二節 — unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="hbl" %}
+{% include_relative include/exploit-usm.txt %}
#### 第三節 — 安裝 boot9strap
diff --git a/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt b/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt
index 631163cfc1..7b9be32846 100644
--- a/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt
@@ -30,15 +30,12 @@ For a more technical explanation, see the following links for information on the
- 一份與兩台主機同區的馬利歐賽車 7 (實體或數位版皆可)
- 兩張 SD 卡
-If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--warning}
-
### 必備項目
On the **source 3DS** (the 3DS with custom firmware):
* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)
+* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/PabloMK7/Luma3DS_3GX/releases/latest) (`boot.firm`)
On the **target 3DS** (the 3DS that you are trying to modify):
@@ -47,7 +44,14 @@ On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* 最新版的 [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (選擇 RELEASE `.zip` 檔案)
-#### 第一步 – 準備工作(目標 3DS)
+#### Section I - Hardware Button Check (target 3DS)
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--warning}
+
+#### Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
@@ -61,7 +65,7 @@ In this section, you will set up your source 3DS (the 3DS with custom firmware)
- Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**
-#### 第二步 – 準備工作(目標 3DS)
+#### Section III - Prep Work (target 3DS)
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)'s SD card.
@@ -75,7 +79,7 @@ In this section, you will copy the files needed to trigger the unSAFE_MODE explo
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**
-#### 第三節 — kartdlphax
+#### Section IV - kartdlphax
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
@@ -111,18 +115,18 @@ In this section, you will use Download Play to transfer the exploit data from th
You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}
-#### 第四節 — unSAFE_MODE
+#### Section V - unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="kartdlphax" %}
+{% include_relative include/exploit-usm.txt %}
-#### 第五節 — 安裝 boot9strap
+#### Section VI - Installing boot9strap
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section VII - Restoring WiFi Configuration Profiles
{% include_relative include/remove-usm-slottool.txt %}
diff --git a/_pages/zh_TW/installing-boot9strap-(safecerthax).txt b/_pages/zh_TW/installing-boot9strap-(safecerthax).txt
new file mode 100644
index 0000000000..02ad462338
--- /dev/null
+++ b/_pages/zh_TW/installing-boot9strap-(safecerthax).txt
@@ -0,0 +1,85 @@
+---
+title: "Installing boot9strap (safecerthax)"
+---
+
+{% include toc title="條目內容" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+For technical details on the exploit that you will be using on this page, see [here](https://github.com/MrNbaYoh/safecerthax).
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+### 相容性資訊
+
+safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions on system versions 1.0.0 through 11.14.0.
+
+This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing.
+{: .notice--info}
+
+### 必備項目
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+
+### 操作說明
+
+#### Section I - Hardware Button Check
+
+{% include_relative include/safemodecheck.txt %}
+
+If you do not boot into Safe Mode, the system update menu after multiple attempts, you cannot follow this method. If this is the case, use [Seedminer](seedminer) instead.
+{: .notice--warning}
+
+#### 第二節 — 準備工作
+
+In this section, you will copy the files needed to trigger the safecerthax exploit.
+
+1. 將 SD 卡插入至電腦中
+1. 解壓 Luma3DS `.zip` 內的 `boot.firm` 及 `boot.3dsx` 到 SD 卡的根目錄底下
+ + 「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
+1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap`
+1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中
+1. 將 SafeB9SInstaller `.zip` 中的 `SafeB9SInstaller.bin` 複製到 SD 卡的根目錄
+1. 將 SD 卡插回主機中
+1. 啟動您的主機
+
+#### Section III - safecerthax proxy
+
+In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your device.
+
+{% include_relative include/addproxy.txt %}
+1. 關閉您的主機
+
+#### Section IV - safecerthax
+
+In this section, you will enter Safe Mode (a feature available on all 3DS family devices) where safecerthax will be triggered, which will launch you into the boot9strap (custom firmware) installer.
+
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
+ + Keep holding the buttons until the device boots into Safe Mode (a "system update" menu)
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
+1. Press "OK" to close the error message
+1. 如果一切成功的話，您將自動進入 SafeB9SInstaller
+ + If the device freezes or crashes, force power off the device, then retry this section
+
+#### 第五節 — 安裝 boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section VI - Restoring default proxy
+
+{% include_relative include/rmproxy.txt %}
+
+___
+
+### 繼續至[完成安裝](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/zh_TW/installing-boot9strap-(ssloth-browser).txt b/_pages/zh_TW/installing-boot9strap-(ssloth-browser).txt
index 3d86b18876..3e04378bce 100644
--- a/_pages/zh_TW/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/zh_TW/installing-boot9strap-(ssloth-browser).txt
@@ -53,25 +53,14 @@ In this section, you will copy the files needed to trigger both browserhax and u
In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.
-If you haven't already, make sure you have a working Internet connection set up on your console.
-{: .notice--info}
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "Yes", then click `Detailed Setup`
-1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080`
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. Click "OK" to continue
+{% include_relative include/addproxy.txt %}
1. Press "Back" twice, then "Close" to go back to the HOME Menu
#### 第三節 — 啟動 SafeB9SInstaller
In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
+1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
@@ -88,16 +77,7 @@ In this section, you will visit the browser exploit webpage, which will use univ
#### 第五節 — 還原預設 Proxy
-In this section, you will restore the Internet settings back to normal.
-
-1. Launch the System Settings application
-1. Navigate to `Internet Settings` -> `Connection Settings`
-1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
-1. Set "Proxy Settings" to "No"
-1. Click OK, then click Save
-1. When prompted, click "Test" to perform the connection test
- + The test should succeed
-1. 關閉您的主機
+{% include_relative include/rmproxy.txt %}
___
diff --git a/_pages/zh_TW/installing-boot9strap-(usm).txt b/_pages/zh_TW/installing-boot9strap-(usm).txt
index 3a66b8776a..de39aeb65c 100644
--- a/_pages/zh_TW/installing-boot9strap-(usm).txt
+++ b/_pages/zh_TW/installing-boot9strap-(usm).txt
@@ -70,7 +70,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
#### 第三節 — unSAFE_MODE
-{% include_relative include/exploit-usm.txt method="bb3" %}
+{% include_relative include/exploit-usm.txt %}
#### 第四節 — 安裝 boot9strap
diff --git a/_pages/zh_TW/region-changing.txt b/_pages/zh_TW/region-changing.txt
index 7565296f0b..101deaacc9 100644
--- a/_pages/zh_TW/region-changing.txt
+++ b/_pages/zh_TW/region-changing.txt
@@ -6,11 +6,15 @@ title: "區碼變更"
### 必讀事項
-This is an add-on section for region changing your CFW SysNAND. 這是透過安裝所選區域的 11.15.0 CTRTransfer 鏡像檔達成的。 After installing the image, you can update your device normally to the latest firmware (11.16.0).
+This is an add-on section for region changing your device. 這是透過安裝所選區域的 11.15.0 CTRTransfer 鏡像檔達成的。 After installing the image, you can update your device normally to the latest firmware (11.16.0).
-**請注意，區碼變更通常是不需要的，因為 Luma3DS 本身就支援跨區遊玩及程式[語碼模擬](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)的功能。** 另外，您也可透過[TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases)來運行非支援語系的 NDS 遊戲。
+**請注意，區碼變更通常是不需要的，因為 Luma3DS 本身就支援跨區遊玩及程式[語碼模擬](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)的功能。** 另外，您也可透過[TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases)來運行非支援語系的 NDS 遊戲。 You should only perform a region change if you wish to have your system UI is in a language that is not available on your console's current region.
-請注意，如果您在 SD 卡中的 `/luma/payloads/` 資料夾中放有除了 `GodMode9.firm` 的 payload 檔案，在開機時按住『Start』鍵將會顯示一個『加載選單』，從那裏您得透過方向鍵及按鈕『A』選擇『GodMode9』。
+This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
+{: .notice--info}
+
+As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+{: .notice--warning}
{% capture notice-6 %}
If you change the region of your device:
@@ -18,20 +22,16 @@ If you change the region of your device:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
+ While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the device!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
{% endcapture %}
{{ notice-6 | markdownify }}
-您必須先安裝 Luma3DS 和 boot9strap 才能繼續。
-{: .notice--danger}
-
-請注意，在舊 3DS 及 舊 2DS 主機上進行區碼變更，可能會導致需使用擴充記憶體模式的遊戲無法正常運作 (如魔物獵人、超級瑪利歐、精靈寶可夢月亮/太陽)。 若遇到此情形時，您必須重新格式化您的主機以修正此問題 (透過 TinyFormat 或系統設定)。
-{: .notice--warning}
-
### 必備項目
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
+To download the CTRTransfer images on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (選擇 GodMode9 `.zip` 檔案)
@@ -72,15 +72,11 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### 第六節 — 區域設定
+#### Section VI - Deleting system save data
-1. 進入系統設定 (System Settings)
-1. 進入『其他設定(Other Settings)』、『個人檔案(Profile)』中的『區域設定(Region Settings)』
-1. 選擇您想改成的國家
-1. 若提示時，州的部分不必設定
-
-#### 第七節 — 移除 CTRTransfer 鏡像檔
-
-{% include_relative include/ctrtransfer-cleanup.txt %}
+{% include_relative include/ctrnand-datayeet.txt %}
___
+
+Your 3DS has successfully been region changed!
+{: .notice--success}
diff --git a/_pages/zh_TW/site-navigation.txt b/_pages/zh_TW/site-navigation.txt
index a4363135c0..e15a3a204d 100644
--- a/_pages/zh_TW/site-navigation.txt
+++ b/_pages/zh_TW/site-navigation.txt
@@ -23,6 +23,7 @@ sitemap: false
+ [檢查是否已安裝自製韌體](checking-for-cfw)
+ [貢獻](contribute)
+ [CTRTransfer](ctrtransfer)
++ [Dumping Movable (nimhax)](dumping-movable-(nimhax))
+ [轉存程式及遊戲卡帶](dumping-titles-and-game-cartridges)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -41,11 +42,14 @@ sitemap: false
+ [GodMode9 用法](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
+ [首頁](/zh_TW/)
++ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [安裝 boot9strap (透過 Fredtool)](installing-boot9strap-(fredtool))
++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [安裝 boot9strap (透過硬改)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [安裝 boot9strap (透過 kartdlphax)](installing-boot9strap-(kartdlphax))
+ [安裝 boot9strap (透過 ntrboot)](installing-boot9strap-(ntrboot))
++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax))
+ [安裝 boot9strap (透過 Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser))
+ [安裝 boot9strap (透過 USM)](installing-boot9strap-(usm))
diff --git a/_pages/zh_TW/troubleshooting.txt b/_pages/zh_TW/troubleshooting.txt
index 2009b64f37..9a2c96c2a4 100644
--- a/_pages/zh_TW/troubleshooting.txt
+++ b/_pages/zh_TW/troubleshooting.txt
@@ -17,6 +17,7 @@ Guide pages:
* [Installing boot9strap (Fredtool)](#installing-boot9strap-fredtool)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
+* [Homebrew Launcher (super-skaterhax)](#homebrew-launcher-super-skaterhax)
* [Finalizing Setup](#finalizing-setup)
@@ -420,6 +421,31 @@ Back up your data and reformat your SD card as FAT32 with the recommended tool d
{% endcapture %}
{{ compat | markdownify }}
+## Homebrew Launcher (super-skaterhax)
+
+{% capture compat %}
+"An error has occured. Please save your data in any software currently in use, then restart the system."
+
+The date is set incorrectly. To set it correctly, follow these steps:
+
+1. Select the System Settings icon on the HOME Menu, and tap Open.
+1. Tap Other Settings.
+1. Tap Date & Time.
+1. Tap Today's date.
+1. Tap Up/Down Arrows to set the correct Day, Month and Year.
+1. Select OK to confirm.
+
+If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+An exception occured or ErrDisp when pressing GO! GO!
+
+This likely indicates that you already have custom firmware. 請先[檢查是否已安裝自製韌體](checking-for-cfw) 。
+
+{% endcapture %}
+{{ compat | markdownify }}
## 完成安裝