From b1b1e7c0d5c2b7c4fcacf1b58a4865e9d543612f Mon Sep 17 00:00:00 2001 From: Plailect Date: Wed, 22 Mar 2017 17:05:04 -0400 Subject: [PATCH] use gm9 for copying luma to ctrnand --- _pages/en_US/Installing-arm9loaderhax.txt | 27 ++++++++++++++--------- _pages/en_US/Troubleshooting.txt | 4 ++-- _pages/en_US/Updating-A9LH.txt | 26 +++++++++++++--------- 3 files changed, 33 insertions(+), 24 deletions(-) diff --git a/_pages/en_US/Installing-arm9loaderhax.txt b/_pages/en_US/Installing-arm9loaderhax.txt index dc4592812f..0b1adb7d05 100644 --- a/_pages/en_US/Installing-arm9loaderhax.txt +++ b/_pages/en_US/Installing-arm9loaderhax.txt @@ -150,19 +150,16 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Navigate to `SD` -> `cias` 1. Select "\" 1. Select the "Install all CIAs" option, then press (A) to confirm -1. Return to the SD directory with (B) -1. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -1. Return to the FBI main menu with (B) -1. Navigate to `CTR NAND` -1. Select "\" -1. Select the "Paste" option, then press (A) to confirm -1. Press (Home) +1. Press (Home) to exit FBI + +##### Section VII - DSP Dump + 1. Launch the Homebrew Launcher from the home menu 1. Select "DSP Dump" 1. Press (Start) when prompted to exit DSP Dump 1. Press (Start) to launch the Homebrew Launcher exit menu -##### Section VII - Restore Health and Safety +##### Section VIII - Restore Health and Safety 1. Reboot holding (Start) during boot to launch GodMode9 1. Press (Home) to bring up the action menu @@ -170,8 +167,16 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Select "Restore H&S" 1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given -##### Section VIII - Finalizing Setup +##### Section IX - CTRNAND Luma3DS +1. Navigate to `SDCARD` +1. Press (Y) on `arm9loaderhax.bin` to copy it +1. Press (B) to return to the main menu +1. Navigate to `SYSNAND CTRNAND` +1. Press (Y) to paste `arm9loaderhax.bin` +1. Select "Copy path(s)" +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. Press (B) to return to the main menu 1. Hold (R) and press (B) at the same time to eject your SD card 1. Remove your SD card from your device 1. Press (Start) to reboot your device with the SD card removed @@ -200,9 +205,9 @@ This will only update the Luma3DS files on the SD card. If you boot your device
{{ notice-10 | markdownify }}
{% capture notice-6 %} -You will now boot a Custom Firmware based SysNAND by default. +You will now boot Luma3DS CFW SysNAND by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. -You can now hold (Start) on boot to launch GodMode1. +You can now hold (Start) on boot to launch GodMode9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/en_US/Troubleshooting.txt b/_pages/en_US/Troubleshooting.txt index d60628e983..972f3d25ed 100644 --- a/_pages/en_US/Troubleshooting.txt +++ b/_pages/en_US/Troubleshooting.txt @@ -74,8 +74,8 @@ This is caused by Gateway implementing a very shoddy downgrade method, which lea + **New 3DS USA**: `20021300` -> `content` 1. Notice that there are two sets of app and tmd files, one set with uppercase extensions (`.TMD` and `.APP`), and one set with lowercase extensions (`.tmd` and `.app`) 1. While holding the (R) trigger, press (Y) to create a new directory -1. Press (A) to confirm the name `newdir` (it doesn't matter what it's called) -1. Press (A) to unlock SysNAND writing, then input the key combo given +1. Press (A) to confirm the name `newdir` (it does not matter what the folder is called) +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given 1. Press the (L) trigger on each of the uppercase extension files (`.TMD` and `.APP`) to mark them 1. Press (Y) to copy the files 1. Navigate to `newdir` diff --git a/_pages/en_US/Updating-A9LH.txt b/_pages/en_US/Updating-A9LH.txt index 4354e7e301..3254cd279f 100644 --- a/_pages/en_US/Updating-A9LH.txt +++ b/_pages/en_US/Updating-A9LH.txt @@ -35,6 +35,7 @@ These steps will also update your various payloads and the AES key database. #### Instructions **For all of these instructions, OVERWRITE any existing files on your SD card.** +{: .notice--info} ##### Section I - Prep work @@ -76,20 +77,23 @@ These steps will also update your various payloads and the AES key database. ##### Section IV - CTRNAND Luma3DS -1. Launch FBI -1. Navigate to `SD` -> `cias` -1. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -1. Return to the FBI main menu with (B) -1. Navigate to `CTR NAND` -1. Select "\" -1. Select the "Paste" option, then press (A) to confirm -1. Press (Home) to exit FBI -1. Power off your device and remove the SD card -1. Boot with the SD card removed while holding (Select) +1. Reboot holding (Start) during boot to launch GodMode9 +1. Navigate to `SDCARD` +1. Press (Y) on `arm9loaderhax.bin` to copy it +1. Press (B) to return to the main menu +1. Navigate to `SYSNAND CTRNAND` +1. Press (Y) to paste `arm9loaderhax.bin` +1. Select "Copy path(s)" + + Overwrite any existing `arm9loaderhax.bin` if prompted +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. Press (B) to return to the main menu +1. Hold (R) and press (B) at the same time to eject your SD card +1. Remove your SD card from your device +1. Press (Start) to reboot your device with the SD card removed + Booting your device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -1. If you are using a **New 3DS**, you should *also* enable the following: +1. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again