diff --git a/_pages/ar_SA/faq.txt b/_pages/ar_SA/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/ar_SA/faq.txt +++ b/_pages/ar_SA/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ar_SA/home.txt b/_pages/ar_SA/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/ar_SA/home.txt +++ b/_pages/ar_SA/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ar_SA/installing-boot9strap-(fredtool).txt b/_pages/ar_SA/installing-boot9strap-(fredtool).txt index 3b0273de72..6d973b080b 100644 --- a/_pages/ar_SA/installing-boot9strap-(fredtool).txt +++ b/_pages/ar_SA/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/ar_SA/region-changing.txt b/_pages/ar_SA/region-changing.txt index 1dcfd12f73..e3d0b3d905 100644 --- a/_pages/ar_SA/region-changing.txt +++ b/_pages/ar_SA/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/bg_BG/faq.txt b/_pages/bg_BG/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/bg_BG/faq.txt +++ b/_pages/bg_BG/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/bg_BG/home.txt b/_pages/bg_BG/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/bg_BG/home.txt +++ b/_pages/bg_BG/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/bg_BG/installing-boot9strap-(fredtool).txt b/_pages/bg_BG/installing-boot9strap-(fredtool).txt index 3b0273de72..6d973b080b 100644 --- a/_pages/bg_BG/installing-boot9strap-(fredtool).txt +++ b/_pages/bg_BG/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/bg_BG/region-changing.txt b/_pages/bg_BG/region-changing.txt index 1dcfd12f73..e3d0b3d905 100644 --- a/_pages/bg_BG/region-changing.txt +++ b/_pages/bg_BG/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/ca_ES/faq.txt b/_pages/ca_ES/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/ca_ES/faq.txt +++ b/_pages/ca_ES/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ca_ES/home.txt b/_pages/ca_ES/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/ca_ES/home.txt +++ b/_pages/ca_ES/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ca_ES/installing-boot9strap-(fredtool).txt b/_pages/ca_ES/installing-boot9strap-(fredtool).txt index 3b0273de72..6d973b080b 100644 --- a/_pages/ca_ES/installing-boot9strap-(fredtool).txt +++ b/_pages/ca_ES/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/ca_ES/region-changing.txt b/_pages/ca_ES/region-changing.txt index 1aa81edb6d..1ac4fe6e90 100644 --- a/_pages/ca_ES/region-changing.txt +++ b/_pages/ca_ES/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/cs_CZ/faq.txt b/_pages/cs_CZ/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/cs_CZ/faq.txt +++ b/_pages/cs_CZ/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/cs_CZ/home.txt b/_pages/cs_CZ/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/cs_CZ/home.txt +++ b/_pages/cs_CZ/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt index 3b0273de72..6d973b080b 100644 --- a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt +++ b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/cs_CZ/region-changing.txt b/_pages/cs_CZ/region-changing.txt index 1dcfd12f73..e3d0b3d905 100644 --- a/_pages/cs_CZ/region-changing.txt +++ b/_pages/cs_CZ/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/de_DE/faq.txt b/_pages/de_DE/faq.txt index ac45019b6d..5afb9e031e 100644 --- a/_pages/de_DE/faq.txt +++ b/_pages/de_DE/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/de_DE/home.txt b/_pages/de_DE/home.txt index d0e4d4635c..9f3c666b4d 100644 --- a/_pages/de_DE/home.txt +++ b/_pages/de_DE/home.txt @@ -14,7 +14,6 @@ excerpt: "Eine vollständige Anleitung für 3DS Custom Firmware,
von origi - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/de_DE/installing-boot9strap-(fredtool).txt b/_pages/de_DE/installing-boot9strap-(fredtool).txt index 3eb433e485..411024f7a2 100644 --- a/_pages/de_DE/installing-boot9strap-(fredtool).txt +++ b/_pages/de_DE/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. Dies ist eine zurzeit funktionierende Implementation des "FIRM Partitions Known-Plaintext"-Exploits. Details findest du [hier](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/de_DE/region-changing.txt b/_pages/de_DE/region-changing.txt index dee3e366d6..a73ef137a3 100644 --- a/_pages/de_DE/region-changing.txt +++ b/_pages/de_DE/region-changing.txt @@ -6,7 +6,7 @@ title: "Wechseln der Region" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Drücke gleichzeitig (L) + (Steuerkreuz unten) + (Select) um das Rosalina Menü zu öffnen 1. Wähle "Miscellaneous options" 1. Wähle "Switch the hb. title to the current app." diff --git a/_pages/el_GR/faq.txt b/_pages/el_GR/faq.txt index f4e8ba4c80..d4fc9ebfd7 100644 --- a/_pages/el_GR/faq.txt +++ b/_pages/el_GR/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/el_GR/home.txt b/_pages/el_GR/home.txt index 573262def9..19c26a8c6a 100644 --- a/_pages/el_GR/home.txt +++ b/_pages/el_GR/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/el_GR/installing-boot9strap-(fredtool).txt b/_pages/el_GR/installing-boot9strap-(fredtool).txt index 53a17ed04e..dbe08f1869 100644 --- a/_pages/el_GR/installing-boot9strap-(fredtool).txt +++ b/_pages/el_GR/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/el_GR/region-changing.txt b/_pages/el_GR/region-changing.txt index 05ca172767..6c75aea2f0 100644 --- a/_pages/el_GR/region-changing.txt +++ b/_pages/el_GR/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/en_PT/faq.txt b/_pages/en_PT/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/en_PT/faq.txt +++ b/_pages/en_PT/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/en_PT/home.txt b/_pages/en_PT/home.txt index 67edba5e60..2931d59694 100644 --- a/_pages/en_PT/home.txt +++ b/_pages/en_PT/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/en_PT/installing-boot9strap-(fredtool).txt b/_pages/en_PT/installing-boot9strap-(fredtool).txt index fd41306329..fbf1428ac4 100644 --- a/_pages/en_PT/installing-boot9strap-(fredtool).txt +++ b/_pages/en_PT/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/en_PT/region-changing.txt b/_pages/en_PT/region-changing.txt index 242a3816e4..3fd6592f58 100644 --- a/_pages/en_PT/region-changing.txt +++ b/_pages/en_PT/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at th' same time to be openin' th' Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/es_ES/faq.txt b/_pages/es_ES/faq.txt index 20661d32df..9a9cd0ee3b 100644 --- a/_pages/es_ES/faq.txt +++ b/_pages/es_ES/faq.txt @@ -8,7 +8,6 @@ title: "Preguntas Frecuentes" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/es_ES/home.txt b/_pages/es_ES/home.txt index dda41a49e6..8a3ed74350 100644 --- a/_pages/es_ES/home.txt +++ b/_pages/es_ES/home.txt @@ -14,7 +14,6 @@ excerpt: "Una guía completa de custom firmware para 3DS,
desde stock a b - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/es_ES/installing-boot9strap-(fredtool).txt b/_pages/es_ES/installing-boot9strap-(fredtool).txt index bb4d8e66ba..aadfd3b114 100644 --- a/_pages/es_ES/installing-boot9strap-(fredtool).txt +++ b/_pages/es_ES/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Instalar Boot9strap (Fredtool)" ### Lectura requerida -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - Este método de uso de Seedminer, para hacer un mejor exploit, utiliza tu archivo `movable.sed` para desencriptar cualquier título de DSiWare con el objetivo de inyectar un título de DSiWare vulnerable en la aplicación de Configuración de Internet de DS. Esto requiere que tengas una copia de seguridad de un título de DSiWare, por ejemplo, el proveniente de BannerBomb o la herramienta DSiWare Dumper. Todo esto son implementaciones funcionales del exploit "Particiones FIRM de texto plano conocido" detallado [aquí](https://www.3dbrew.org/wiki/3DS_System_Flaws) (*en inglés*). diff --git a/_pages/es_ES/region-changing.txt b/_pages/es_ES/region-changing.txt index f899cdb6a0..def1f158d0 100644 --- a/_pages/es_ES/region-changing.txt +++ b/_pages/es_ES/region-changing.txt @@ -6,7 +6,7 @@ title: "Cambio de Región" ### Lectura requerida -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Sección IV - Iniciar FBI -1. Inicia la aplicación Modo Descarga (este [ícono]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Presiona (L) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina 1. Selecciona "Miscellaneous options" 1. Selecciona "Switch the hb. title to the current app." diff --git a/_pages/fi_FI/faq.txt b/_pages/fi_FI/faq.txt index a59a24409f..c3fff427ea 100644 --- a/_pages/fi_FI/faq.txt +++ b/_pages/fi_FI/faq.txt @@ -8,7 +8,6 @@ title: "UKK" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/fi_FI/home.txt b/_pages/fi_FI/home.txt index ddb153cd2d..2387e83e63 100644 --- a/_pages/fi_FI/home.txt +++ b/_pages/fi_FI/home.txt @@ -14,7 +14,6 @@ excerpt: "Perusteellinen opas 3DS:n mukautettuun laiteohjelmistoon,
vakio - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/fi_FI/installing-boot9strap-(fredtool).txt b/_pages/fi_FI/installing-boot9strap-(fredtool).txt index a2d7cd8c98..93325abbce 100644 --- a/_pages/fi_FI/installing-boot9strap-(fredtool).txt +++ b/_pages/fi_FI/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Tärkeää tietoa -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. Tämä menetelmä käyttää FIRM-osioiden salaamatonta muotoa (known-plaintext, selitetty [täällä](https://www.3dbrew.org/wiki/3DS_System_Flaws)) hyödyntävää haavoittuvuutta. diff --git a/_pages/fi_FI/region-changing.txt b/_pages/fi_FI/region-changing.txt index 611923cb93..b977278d57 100644 --- a/_pages/fi_FI/region-changing.txt +++ b/_pages/fi_FI/region-changing.txt @@ -6,7 +6,7 @@ title: "Alueen vaihtaminen" ### Tärkeää tietoa -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Paina (L)-, (ALAS)- ja (SELECT)-painikkeita samaan aikaan avataksesi Rosalina-valikon 1. Valitse "Miscellaneous options" 1. Valitse "Switch the hb. title to the current app." diff --git a/_pages/fr_FR/faq.txt b/_pages/fr_FR/faq.txt index 7a2ad20a57..7851752658 100644 --- a/_pages/fr_FR/faq.txt +++ b/_pages/fr_FR/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/fr_FR/file-extensions-(windows).txt b/_pages/fr_FR/file-extensions-(windows).txt index 3c6e867e43..d50406cb3a 100644 --- a/_pages/fr_FR/file-extensions-(windows).txt +++ b/_pages/fr_FR/file-extensions-(windows).txt @@ -45,5 +45,5 @@ Cela rendra la tâche plus simple pour trouver les différents fichiers mentionn ![]({{ "/images/screenshots/windows-7-folder-options.png" | absolute_url }}) {: .notice--info} -### Continue to [Get Started](get-started) +### Continuer vers [Commencer](get-started) {: .notice--primary} diff --git a/_pages/fr_FR/home.txt b/_pages/fr_FR/home.txt index e44dcfe2c5..805224b849 100644 --- a/_pages/fr_FR/home.txt +++ b/_pages/fr_FR/home.txt @@ -14,7 +14,6 @@ excerpt: "Un guide complet pour le custom firmware de 3DS,
depuis le firm - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/fr_FR/installing-boot9strap-(fredtool).txt b/_pages/fr_FR/installing-boot9strap-(fredtool).txt index c8921e74ce..25f7450e78 100644 --- a/_pages/fr_FR/installing-boot9strap-(fredtool).txt +++ b/_pages/fr_FR/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installation de Boot9strap (Fredtool)" ### Lecture requise -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - Cette méthode d'utilisation de Seedminer pour une exploitation ultérieure utilise votre fichier `movable.sed` pour déchiffrer n'importe quel titre DSiWare afin d'injecter un titre DSiWare exploitable dans l'application Connexions Nintendo DS. Cela nécessite d'avoir une sauvegarde d'un DSiWare, par exemple à partir de BannerBomb ou de l'outil DSiWare Dumper. Ceci est une implémentation de l'exploit "FIRM partitions known-plaintext" qui est décrit [ici](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/fr_FR/region-changing.txt b/_pages/fr_FR/region-changing.txt index 6a6bc804d5..ace1f6e84d 100644 --- a/_pages/fr_FR/region-changing.txt +++ b/_pages/fr_FR/region-changing.txt @@ -6,7 +6,7 @@ title: "Changement de Région" ### Lecture requise -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Lancement de FBI -1. Lancez l'application Mode téléchargement (cette [icône]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Appuyez simultanément sur (L) + (Bas) + (Select) pour ouvrir le menu Rosalina 1. Sélectionnez "Miscellaneous options" 1. Sélectionnez "Switch the hb. title to the current app." diff --git a/_pages/he_IL/faq.txt b/_pages/he_IL/faq.txt index b120e2f5ea..f18a653704 100644 --- a/_pages/he_IL/faq.txt +++ b/_pages/he_IL/faq.txt @@ -8,7 +8,6 @@ title: "שאלות ותשובות" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/he_IL/home.txt b/_pages/he_IL/home.txt index 03c03a0ce8..8618db3223 100644 --- a/_pages/he_IL/home.txt +++ b/_pages/he_IL/home.txt @@ -14,7 +14,6 @@ excerpt: "מדריך שלם לפריצת 3DS,
מהחנות עד ל boot9s - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/he_IL/installing-boot9strap-(fredtool).txt b/_pages/he_IL/installing-boot9strap-(fredtool).txt index 54e49af497..55347c5df7 100644 --- a/_pages/he_IL/installing-boot9strap-(fredtool).txt +++ b/_pages/he_IL/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### קריאה דרושה -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. זה כרגע יישום עובד של הפירצה "PLAINTEXT ידוע למחיצת הFIRM" עם הסבר [כאן](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/he_IL/region-changing.txt b/_pages/he_IL/region-changing.txt index 2f2e8e3bd9..b1f074faf8 100644 --- a/_pages/he_IL/region-changing.txt +++ b/_pages/he_IL/region-changing.txt @@ -6,7 +6,7 @@ title: "שינוי אזור" ### קריאה דרושה -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. תלחצו (L) + (Down) + (Select) באותו זמן כדי לפתוח את התפריט של Rosalina 1. תבחרו ב "Miscellaneous options" 1. תבחרו ב "Switch the hb. title to the current app." diff --git a/_pages/hr_HR/faq.txt b/_pages/hr_HR/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/hr_HR/faq.txt +++ b/_pages/hr_HR/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/hr_HR/home.txt b/_pages/hr_HR/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/hr_HR/home.txt +++ b/_pages/hr_HR/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/hr_HR/installing-boot9strap-(fredtool).txt b/_pages/hr_HR/installing-boot9strap-(fredtool).txt index 3b0273de72..6d973b080b 100644 --- a/_pages/hr_HR/installing-boot9strap-(fredtool).txt +++ b/_pages/hr_HR/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/hr_HR/region-changing.txt b/_pages/hr_HR/region-changing.txt index 1dcfd12f73..e3d0b3d905 100644 --- a/_pages/hr_HR/region-changing.txt +++ b/_pages/hr_HR/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/hu_HU/faq.txt b/_pages/hu_HU/faq.txt index a8fb1c0f8b..3dba062b97 100644 --- a/_pages/hu_HU/faq.txt +++ b/_pages/hu_HU/faq.txt @@ -8,7 +8,6 @@ title: "GYIK" - Ha az eszközöd *Luma 11.0* -t futtat, *100% biztonságos* a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával az eszközöd elindítása közben. - Ha az eszközöd régebbi Luma verziót futtat, [frissítened kell a Luma-t](checking-for-cfw) mielőtt az eszközöd 11.16.0 verzióra frissíted. -- A [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (ami PLG pluginek futtatásához és vezeték nélküli streameléshez használt) frissítendő, hogy működjon 11.16.0 verzión. Ha használod, akkor várnod kell a frissítésére, mielőtt felfrissítenéd az eszközöd 11.16.0 verzióra. - Ha az eszközöd nem rendelkezik egyedi firmware-rel, telepítheted ezt a verziót bármilyen további hardver nélkül, de az ajánlott metódus megváltozik. {% endcapture %} diff --git a/_pages/hu_HU/home.txt b/_pages/hu_HU/home.txt index 709108433a..f5c389906e 100644 --- a/_pages/hu_HU/home.txt +++ b/_pages/hu_HU/home.txt @@ -14,7 +14,6 @@ excerpt: "Egy teljes útmutató egyedi 3DS firmware-hez,
gyári állapott - Ha az eszközöd *Luma 11.0* -t futtat, *100% biztonságos* a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával az eszközöd elindítása közben. - Ha az eszközöd régebbi Luma verziót futtat, [frissítened kell a Luma-t](checking-for-cfw) mielőtt az eszközöd 11.16.0 verzióra frissíted. -- A [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (ami PLG pluginek futtatásához és vezeték nélküli streameléshez használt) frissítendő, hogy működjon 11.16.0 verzión. Ha használod, akkor várnod kell a frissítésére, mielőtt felfrissítenéd az eszközöd 11.16.0 verzióra. - Ha az eszközöd nem rendelkezik egyedi firmware-rel, telepítheted ezt a verziót bármilyen további hardver nélkül, de az ajánlott metódus megváltozik. {% endcapture %} diff --git a/_pages/hu_HU/installing-boot9strap-(fredtool).txt b/_pages/hu_HU/installing-boot9strap-(fredtool).txt index 4dc8ab156f..a152228868 100644 --- a/_pages/hu_HU/installing-boot9strap-(fredtool).txt +++ b/_pages/hu_HU/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Boot9strap telepítése (Fredtool)" ### Fontos tudnivalók -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - Ez a metódusa a Seedminer használatának a további exploitoláshoz használja a `movable.sed` fájlod, hogy dekriptáljon egy DSiWare címet, azzal az céllal, hogy beinjektáljon egy exploitolható DSiWare címet a DS Download Play alkalmazásba. Ez igényli, hogy rendelkezzél egy DSiWare mentéssel, például a BannerBomb-ból vagy a DSiWare Dumper eszközből. Ez egy jelenleg működő megvalósítása a "FIRM partitions known-plaintext" néven ismert exploitnak, amiről részletesebben olvashatsz [itt](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/hu_HU/region-changing.txt b/_pages/hu_HU/region-changing.txt index b6fe31a583..536f5f87bb 100644 --- a/_pages/hu_HU/region-changing.txt +++ b/_pages/hu_HU/region-changing.txt @@ -6,7 +6,7 @@ title: "Régióváltás" ### Fontos tudnivalók -Ez egy kiegészítő rész, amelyben régióváltást végzünk a CFW SysNAND-on. Ezt úgy hajtjuk végre, hogy telepítünk egy olyan 11.15.0-s CTRTransfer képfájlt, ami az általad kívánt régiójú. +Ez egy kiegészítő rész, amelyben régióváltást végzünk a CFW SysNAND-on. Ezt úgy hajtjuk végre, hogy telepítünk egy olyan 11.15.0-s CTRTransfer képfájlt, ami az általad kívánt régiójú. A képfájl telepítését követően frissítheted az eszközödet a szokásos módon a legutolsó firmware-re (11.16.0). Fontos, hogy tudd, hogy a régióváltás majdnem teljesen felesleges, mivel a Luma3DS támogatja a régiódon kívüli játékokat, illetve a játékonkénti [lokalizáció emulációt](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features) is. Ezen felül, NDS játékok futtatása más, régión kívüli nyelveken is támogatott [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases) segítségével. @@ -118,7 +118,7 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme #### IV. rész - FBI elindítása -1. Indítsd el a Download Play alkalmazást (ez az [ikon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Indítsd el a Download Play alkalmazást (ez az [ikon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Nyomd meg az (L) + (Le) + (Select) gombokat egyszerre, hogy kinyíljon a Rosalina menü 1. Válaszd ki a "Miscellaneous options"-t 1. Válaszd a "Switch the hb. title to the current app." opciót diff --git a/_pages/id_ID/faq.txt b/_pages/id_ID/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/id_ID/faq.txt +++ b/_pages/id_ID/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/id_ID/home.txt b/_pages/id_ID/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/id_ID/home.txt +++ b/_pages/id_ID/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/id_ID/installing-boot9strap-(fredtool).txt b/_pages/id_ID/installing-boot9strap-(fredtool).txt index 3b0273de72..6d973b080b 100644 --- a/_pages/id_ID/installing-boot9strap-(fredtool).txt +++ b/_pages/id_ID/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/id_ID/region-changing.txt b/_pages/id_ID/region-changing.txt index 1dcfd12f73..e3d0b3d905 100644 --- a/_pages/id_ID/region-changing.txt +++ b/_pages/id_ID/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/it_IT/faq.txt b/_pages/it_IT/faq.txt index d7c6c982b7..f9735956f8 100644 --- a/_pages/it_IT/faq.txt +++ b/_pages/it_IT/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - Se la tua console sta eseguendo *Luma 11.0*, è *al 100% sicuro* eseguire l'aggiornamento. Puoi controllare la versione di Luma tenendo premuto (Select) durante l'avvio della console. - Se la tua console ha una versione precedente di Luma, dovresti [aggiornare Luma](checking-for-cfw) prima di aggiornare la tua console alla versione 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (utilizzato per eseguire plugin PLG e streaming wireless) dovrà essere aggiornato prima che possa funzionare su 11.16.0. Se lo utilizzi, è meglio che aspetti il suo aggiornamento prima di aggiornare la console a 11.16.0. - Se la tua console non ha ancora un custom firmware, puoi comunque installarlo gratuitamente su questa versione senza hardware aggiuntivo, ma il metodo consigliato è stato cambiato. {% endcapture %} diff --git a/_pages/it_IT/home.txt b/_pages/it_IT/home.txt index 209407616b..67e4e2e362 100644 --- a/_pages/it_IT/home.txt +++ b/_pages/it_IT/home.txt @@ -14,7 +14,6 @@ excerpt: "La guida omnicomprensiva per installare
un custom firmware su 3DS - Se la tua console sta eseguendo *Luma 11.0*, è *al 100% sicuro* eseguire l'aggiornamento. Puoi controllare la versione di Luma tenendo premuto (Select) durante l'avvio della console. - Se la tua console ha una versione precedente di Luma, dovresti [aggiornare Luma](checking-for-cfw) prima di aggiornare la tua console alla versione 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (utilizzato per eseguire plugin PLG e streaming wireless) dovrà essere aggiornato prima che possa funzionare su 11.16.0. Se lo utilizzi, è meglio che aspetti il suo aggiornamento prima di aggiornare la console a 11.16.0. - Se la tua console non ha ancora un custom firmware, puoi comunque installarlo gratuitamente su questa versione senza hardware aggiuntivo, ma il metodo consigliato è stato cambiato. {% endcapture %} diff --git a/_pages/it_IT/installing-boot9strap-(fredtool).txt b/_pages/it_IT/installing-boot9strap-(fredtool).txt index 686385012c..893807825f 100644 --- a/_pages/it_IT/installing-boot9strap-(fredtool).txt +++ b/_pages/it_IT/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installazione di Boot9strap (Fredtool)" ### Lettura necessaria -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - Seedminer utilizza il tuo file `movable.sed` per decriptare un qualunque titolo DSiWare per iniettare una particolare applicazione DSiWare nell'applicazione Connessioni Nintendo DS. Questo richiede un backup DSiWare, ad esempio da BannerBomb o da DSiWare Dumper. Questa è un'implementazione funzionante dell'exploit del "testo in chiaro noto nelle partizioni FIRM" spiegato [qui](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/it_IT/region-changing.txt b/_pages/it_IT/region-changing.txt index 4360a021c4..5b4f0733ce 100644 --- a/_pages/it_IT/region-changing.txt +++ b/_pages/it_IT/region-changing.txt @@ -6,7 +6,7 @@ title: "Cambiare regione" ### Lettura necessaria -In questa sezione aggiuntiva verrà spiegato come cambiare regionalità su SysNAND con CFW. Per questo scopo, verrà eseguito un CTRTransfer alla versione 11.15.0 della regione alla quale si desidera passare. +In questa sezione aggiuntiva verrà spiegato come cambiare regionalità su SysNAND con CFW. Per questo scopo, verrà eseguito un CTRTransfer alla versione 11.15.0 della regione alla quale si desidera passare. Dopo aver installato l'immagine, potrai aggiornare normalmente la console al firmware più recente (11.16.0). Tuttavia, il cambio della regione è quasi completamente inutile in quanto Luma3DS supporta l'avvio di giochi di altre regioni e l'[Emulazione Regionale](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features) su titoli individuali. Inoltre, è possibile avviare giochi NDS con lingue alternative [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest #### Sezione IV - Avviare FBI -1. Avvia l'applicazione "Modalità download" (questa [icona]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Avvia l'applicazione "Download Play" (questa [icona]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina 1. Seleziona "Miscellaneous options" 1. Seleziona "Switch the hb. title to the current app." diff --git a/_pages/ja_JP/faq.txt b/_pages/ja_JP/faq.txt index 63848bfcca..942bb31aaf 100644 --- a/_pages/ja_JP/faq.txt +++ b/_pages/ja_JP/faq.txt @@ -8,7 +8,6 @@ title: "よくある質問" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ja_JP/home.txt b/_pages/ja_JP/home.txt index 7d3c96fcd4..11475b3366 100644 --- a/_pages/ja_JP/home.txt +++ b/_pages/ja_JP/home.txt @@ -14,7 +14,6 @@ header: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ja_JP/installing-boot9strap-(fredtool).txt b/_pages/ja_JP/installing-boot9strap-(fredtool).txt index e4994400e8..11f3d7cc67 100644 --- a/_pages/ja_JP/installing-boot9strap-(fredtool).txt +++ b/_pages/ja_JP/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Boot9strap (Fredtool) のインストール" ### 必読事項 -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - この方法は、Seedminer による脆弱性を用いたあなたの `movable.sed` ファイルを、DSiWareタイトルを復号化し、脆弱性のあるDSiWareタイトルを「DSソフト用設定」アプリに挿入するために使用します。 ここでは、BannerBomb や the DSiWare Dumper toolなどを利用したDSiWareのバックアップファイルが必要です。 下記の方法はすべて「FIRM partitions known-plaintext」脆弱性の有効な活用です。詳しくは [こちら](https://www.3dbrew.org/wiki/3DS_System_Flaws) 。 diff --git a/_pages/ja_JP/region-changing.txt b/_pages/ja_JP/region-changing.txt index 6da96e8f86..2f4e4b0fde 100644 --- a/_pages/ja_JP/region-changing.txt +++ b/_pages/ja_JP/region-changing.txt @@ -6,7 +6,7 @@ title: "リージョンチェンジ" ### 必読事項 -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -121,7 +121,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### セクション IV - FBIを起動 -1. ダウンロードプレイアプリケーションを開きます (この[アイコン]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. L+↓+SelectでRosalinaメニューを開きます。 1. "Miscellaneous options​"を選びます。 1. "Switch the hb. title to the current app."を選びます。 diff --git a/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt b/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt index 0c2e19b2db..74f3162799 100644 --- a/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ title: "BannerBomb3 + Fredtool (타이완)" DSiWare 백업이 있으면, DS 다운로드 플레이에 취약한 DSiWare 타이틀을 주입할 수 있게 되어, 이를 이용해서 커스텀 펌웨어를 설치할 수 있습니다. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! 만약 다른 지역의 콘솔을 갖고 계시다면, [다른 방법을 선택해 주세요](seedminer#next-steps). +이 페이지는 **타이완 콘솔만**에 해당됩니다! (시스템 버전 마지막에 T가 붙음, 예: 11.16.0-39T) 만약 다른 지역의 콘솔을 갖고 계시다면, [다른 방법을 선택해 주세요](seedminer#next-steps). {: .notice--warning} ### 준비물 diff --git a/_pages/ko_KR/faq.txt b/_pages/ko_KR/faq.txt index 87eb8f9d29..c17722fc2b 100644 --- a/_pages/ko_KR/faq.txt +++ b/_pages/ko_KR/faq.txt @@ -4,11 +4,10 @@ title: "자주 묻는 질문" {% include toc title="목차" %} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. 다음 사항을 참고해 주세요. +**3DS 펌웨어 11.16.0이 최근 출시되었습니다**. 다음 사항을 참고해 주세요. -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +만약 기기가 *Luma 11.0*을 사용하고 있다면, 업데이트 해도 *100% 안전합니다*. You can check your Luma version by holding (Select) while booting your device. +- 만약 기기가 오래된 Luma를 사용하고 있다면, 기기를 11.16.0으로 업데이트하기 전에 [CFW 복구 / 업데이트](restoring-updating-cfw)를 해야 합니다. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} @@ -17,7 +16,7 @@ title: "자주 묻는 질문" ## 설치 전 자주 묻는 질문 #### **Q:** *지금 최신 버전을 사용하고 있는데, 이걸로도 아무 하드웨어 변형 없이 커펌을 할 수 있나요?* -**A:** 네! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** 네! 최신 펌웨어 (11.16.0)에서는 [Seedminer](seedminer)를 통해 무료로 CFW를 할 수 있습니다. #### **Q:** *이 가이드는 어떤 기기와 호환되나요?* **A:** 이 가이드는 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, New 2DS XL과 호환됩니다. 만약 시스템 버전이 "0.0.0-0"으로 표시된다면, 개발자 기기를 가지고 있는 것일 수 있습니다. diff --git a/_pages/ko_KR/home.txt b/_pages/ko_KR/home.txt index e32f2e5448..482de6734f 100644 --- a/_pages/ko_KR/home.txt +++ b/_pages/ko_KR/home.txt @@ -12,9 +12,8 @@ excerpt: "3DS 커스텀 펌웨어 완벽 가이드,
순정에서 boot9str {% capture notice-6 %} **3DS 펌웨어 11.16.0이 최근 출시되었습니다**. 다음 사항을 참고해 주세요. -만약 기기가 Luma 11.0을 사용하고 있다면, 업데이트 해도 100% 안전합니다. You can check your Luma version by holding (Select) while booting your device. +만약 기기가 *Luma 11.0*을 사용하고 있다면, 업데이트 해도 *100% 안전합니다*. You can check your Luma version by holding (Select) while booting your device. - 만약 기기가 오래된 Luma를 사용하고 있다면, 기기를 11.16.0으로 업데이트하기 전에 [CFW 복구 / 업데이트](restoring-updating-cfw)를 해야 합니다. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ko_KR/installing-boot9strap-(fredtool).txt b/_pages/ko_KR/installing-boot9strap-(fredtool).txt index bea269bb8b..88327e1bea 100644 --- a/_pages/ko_KR/installing-boot9strap-(fredtool).txt +++ b/_pages/ko_KR/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "boot9strap 설치 (Fredtool)" ### 중요 -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - 이 방식은 Seedminer에서 얻은 `movable.sed` 파일을 사용해 어느 DSiWare 타이틀을 해독해 익스플로잇 가능한 DSiWare 타이틀을 DS 소프트웨어용 인터넷 설정에 주입합니다. 이 과정은 DSiWare 백업이 필요합니다. (예: BannerBomb3에서 받은 파일) 이 작업은 [이곳](https://www.3dbrew.org/wiki/3DS_System_Flaws)에 자세히 설명되어 있는 "FIRM partitions known-plaintext" 익스플로잇을 구현한 작업입니다. @@ -100,9 +97,9 @@ The instructions on this page do not currently work on the latest firmware (11.1 + The existence of these folders and files confirms that Luma3DS is installed + 만약 `luma` 폴더 또는 `config.ini`가 안 보이면, [이 문제 해결 가이드 (영어)](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)를 참고해 주시기 바랍니다 -At this point, your console will boot to Luma3DS by default. +이제 기기는 Luma3DS를 기본으로 부팅 됩니다. + Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다. - + On the next page, you will install useful homebrew applications to complete your setup. + + 다음 페이지에서는 커펌에 유용한 홈브류를 설치해 기기 준비를 완료할 것 입니다. #### 섹션 VI - DS 소프트웨어용 설정 복구 diff --git a/_pages/ko_KR/installing-boot9strap-(hardmod).txt b/_pages/ko_KR/installing-boot9strap-(hardmod).txt index d2876c5c83..d8a748f904 100644 --- a/_pages/ko_KR/installing-boot9strap-(hardmod).txt +++ b/_pages/ko_KR/installing-boot9strap-(hardmod).txt @@ -23,7 +23,7 @@ title: "boot9strap 설치 (하드모드)" * 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) * 최신 버전의 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Mac과 Linux 사용자는 '.py'를 구동하기 위해 [Python 3](https://www.python.org/downloads/)이 설치되어 있어야 하는 반면에 Windows 사용자들은 컴파일된 '.exe'파일을 사용할 수 있습니다 -* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file that isn't source code) +* 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (`.zip` 파일) * 모델과 버전에 맞는`.firm` 파일: | 버전 | 커널 | 구 3DS 또는 구 2DS | 뉴 3DS 또는 뉴 2DS | @@ -84,13 +84,13 @@ title: "boot9strap 설치 (하드모드)" 1. 하드모드를 연결 해제 해 주세요 1. 기기를 시작해 주세요 1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 - + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD카드의 루트로 복사 했는지 확인하세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 + 만약 오류가 나더라도 그냥 다음으로 넘어가 주세요 -At this point, your console will boot to Luma3DS by default. +이제 기기는 Luma3DS를 기본으로 부팅 됩니다. + Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다. - + On the next page, you will install useful homebrew applications to complete your setup. + + 다음 페이지에서는 커펌에 유용한 홈브류를 설치해 기기 준비를 완료할 것 입니다. ___ diff --git a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt index 4b0badc619..5da713c9ac 100644 --- a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt @@ -6,7 +6,7 @@ title: "boot9strap 설치 (kartdlphax)" ### 중요 -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +이 설명서는 최신 시스템 버전 (11.16.0)와 호환되지 않습니다. 만약 이 페이지로 이동 되었다면, [시작하기](get-started) 페이지로 되돌아가거나, [Nintendo Homebrew Discord 서버](https://discord.gg/MWxPgEp) 에서 영어로 도움을 요청해 주시길 바랍니다. {: .notice--warning} kartdlphax는 마리오 카트 7의 다운로드 플레이 모드를 사용하는 익스플로잇입니다. universal-otherapp과 같이 사용하면, 커스텀 펌웨어를 설치할 수 있습니다. diff --git a/_pages/ko_KR/installing-boot9strap-(pichaxx).txt b/_pages/ko_KR/installing-boot9strap-(pichaxx).txt index 5a6b65bad2..6423f83acb 100644 --- a/_pages/ko_KR/installing-boot9strap-(pichaxx).txt +++ b/_pages/ko_KR/installing-boot9strap-(pichaxx).txt @@ -6,7 +6,7 @@ title: "boot9strap 설치 (PicHaxx)" ### 중요 -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +이 설명서는 최신 시스템 버전 (11.16.0)와 호환되지 않습니다. 만약 이 페이지로 이동 되었다면, [Seedminer](seedminer) 페이지로 되돌아가거나, [Nintendo Homebrew Discord 서버](https://discord.gg/MWxPgEp) 에서 영어로 도움을 요청해 주시길 바랍니다. {: .notice--warning} 더 깊은 모딩을 위한 Seedminer의 이 사용법은, 포켓몬 피크로스의 커스텀 세이브 파일을 `movable.sed` 파일을 사용해서 작성해, universal-otherapp과 같이 써서 SafeB9SInstaller를 실행하는 방식입니다. @@ -23,7 +23,7 @@ The instructions on this page do not currently work on the latest firmware (11.1 * 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (직접 다운로드) * 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (직접 다운로드) * 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (`.zip` 파일) -* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) (`otherapp.bin`) +* 최신 버전의 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest`) (`otherapp.bin`) ### 진행 방법 @@ -76,12 +76,12 @@ The instructions on this page do not currently work on the latest firmware (11.1 + 만약 위 화면에 아무것도 안 뜨면, 기기를 재부팅하고 Pokémon Picross를 다시 열어 주세요 1. 작업이 완료되면, (A) 를 눌려 기기를 재부팅해 주세요 1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 - + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD카드의 루트로 복사 했는지 확인하세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 -At this point, your console will boot to Luma3DS by default. +이제 기기는 Luma3DS를 기본으로 부팅 됩니다. + Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다. - + On the next page, you will install useful homebrew applications to complete your setup. + + 다음 페이지에서는 커펌에 유용한 홈브류를 설치해 기기 준비를 완료할 것 입니다. 이 시점에서, 포켓몬 피크로스는 필요가 없으며, 기기에서 제거하셔도 됩니다. 만약 이 게임을 즐기고 싶으시다면, 이전에 백업한 `00000001.sav` 파일을 복구하거나, 게임을 e숍에서 다시 다운로드 하시면 됩니다. diff --git a/_pages/ko_KR/installing-boot9strap-(safeb9sinstaller).txt b/_pages/ko_KR/installing-boot9strap-(safeb9sinstaller).txt index 2b1cb9b2e2..ef28975c68 100644 --- a/_pages/ko_KR/installing-boot9strap-(safeb9sinstaller).txt +++ b/_pages/ko_KR/installing-boot9strap-(safeb9sinstaller).txt @@ -23,13 +23,13 @@ title: "boot9strap 설치 (SafeB9SInstaller)" 1. 메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요 1. 작업이 완료되면, (A) 를 눌려 기기를 재부팅해 주세요 1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 - + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD카드의 루트로 복사 했는지 확인하세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 + 만약 오류가 나더라도 그냥 다음으로 넘어가 주세요 -At this point, your console will boot to Luma3DS by default. +이제 기기는 Luma3DS를 기본으로 부팅 됩니다. + Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다. - + On the next page, you will install useful homebrew applications to complete your setup. + + 다음 페이지에서는 커펌에 유용한 홈브류를 설치해 기기 준비를 완료할 것 입니다. ___ diff --git a/_pages/ko_KR/installing-boot9strap-(soundhax).txt b/_pages/ko_KR/installing-boot9strap-(soundhax).txt index d2ec0155f2..edac315969 100644 --- a/_pages/ko_KR/installing-boot9strap-(soundhax).txt +++ b/_pages/ko_KR/installing-boot9strap-(soundhax).txt @@ -15,7 +15,7 @@ Soundhax는 (universal-otherapp과 사용할 때) 모든 지역의 1.0.0 이상 * 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (직접 다운로드) * 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (직접 다운로드) * 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (`.zip` 파일) -* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) (`otherapp.bin`) +* 최신 버전의 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest`) (`otherapp.bin`) ### 진행 방법 @@ -61,13 +61,13 @@ Soundhax는 (universal-otherapp과 사용할 때) 모든 지역의 1.0.0 이상 1. 메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요 1. 작업이 완료되면, (A) 를 눌려 기기를 재부팅해 주세요 1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 - + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD카드의 루트로 복사 했는지 확인하세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 + 만약 오류가 나더라도 그냥 다음으로 넘어가 주세요 -At this point, your console will boot to Luma3DS by default. +이제 기기는 Luma3DS를 기본으로 부팅 됩니다. + Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다. - + On the next page, you will install useful homebrew applications to complete your setup. + + 다음 페이지에서는 커펌에 유용한 홈브류를 설치해 기기 준비를 완료할 것 입니다. ___ diff --git a/_pages/ko_KR/region-changing.txt b/_pages/ko_KR/region-changing.txt index 67f68e4751..abea0eaed4 100644 --- a/_pages/ko_KR/region-changing.txt +++ b/_pages/ko_KR/region-changing.txt @@ -6,7 +6,7 @@ title: "지역 변경" ### 중요 -이 페이지는 CFW SysNAND의 지역을 변경하는 방법을 안내하는 부가 섹션입니다. 이 작업은 바꾸고자 하는 지역의 11.15.0 CTRTransfer 이미지를 설치합니다. +이 페이지는 CFW SysNAND의 지역을 변경하는 방법을 안내하는 부가 섹션입니다. 이 작업은 바꾸고자 하는 지역의 11.15.0 CTRTransfer 이미지를 설치합니다. After installing the image, you can update your device normally to the latest firmware (11.16.0). Luma3DS가 지역 외 게임들과 [타이틀별 지역 에뮬레이션](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)을 지원하기 때문에, 지역 변경은 거의 불필요하다는 점을 참고해 주시기 바랍니다. 또한, 다른 지역의 NDS게임을 실행하는 것 또한 [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases)에 의해 지원됩니다. @@ -119,7 +119,7 @@ Luma3DS가 지역 외 게임들과 [타이틀별 지역 에뮬레이션](https:/ #### 섹션 IV - FBI 실행 -1. 다운로드 플레이 앱을 실행해 주세요 ([icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. 다운로드 플레이 앱을 실행해 주세요 (이 [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. (L) + (Down) + (Select) 을 동시에 눌러서 Rosalina 메뉴를 실행해 주세요 1. "Miscellaneous options"을 선택해 주세요 1. "Switch the hb. title to the current app."를 선택해 주세요 diff --git a/_pages/ko_KR/restoring-updating-cfw.txt b/_pages/ko_KR/restoring-updating-cfw.txt index 0f509b95a8..da40126544 100644 --- a/_pages/ko_KR/restoring-updating-cfw.txt +++ b/_pages/ko_KR/restoring-updating-cfw.txt @@ -20,9 +20,9 @@ title: "CFW 복구 / 업데이트" + SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 않 들어가 있는 상태의 폴더 입니다 1. SD 카드를 기기에 다시 삽입해 주세요 1. 기기를 시작해 주세요. - + If you see the Luma3DS configuration menu, press (Start) to save and reboot + + 만약 Luma3DS 설정 메뉴로 부팅되었다면, (Start)를 눌러서 저장/리부트해 주세요 -The latest version of Luma3DS has now been installed on your SD card and on internal memory. +최신 버전의 Luma3DS가 SD 카드의 내장 메모리로 설치되었습니다. {: .notice--success} ___ diff --git a/_pages/ko_KR/seedminer.txt b/_pages/ko_KR/seedminer.txt index cd0784b816..4e20c62772 100644 --- a/_pages/ko_KR/seedminer.txt +++ b/_pages/ko_KR/seedminer.txt @@ -21,7 +21,7 @@ Seedminer이 정확히 어떻게 작동하는지 더 배우고싶다면 [이 프 1. `Nintendo 3DS` 폴더 내 32글자의 폴더 이름을 복사해 주세요 + 다른 폴더 안에 들어가지 마세요 + 만약 32-자리 폴더가 여러 개 보인다면 [이 설명서](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder) 를 따르세요. - + You can ignore the `private` folder if you have it + + `private` 이라는 폴더가 있다면 무시하세요. ![]({{ "/images/screenshots/id0-example.png" | absolute_url }}) {: .notice--info} @@ -61,7 +61,7 @@ ___ 기기의 암호화 키 (`movable.sed`)를 구한 후, 이것을 다른 익스플로잇하고 함깨 사용해 커스텀 펌웨어를 설치할 것 입니다. -#### unSAFE_MODE (Recommended) +#### unSAFE_MODE (추천) 더 깊은 모딩을 위한 Seedminer의 이 사용법은, 모든 3DS 기기에 존제하는 SAFE_MODE 펌웨어의 익스플로잇을 사용하는 방식입니다. @@ -70,9 +70,9 @@ ___ ___ -#### Taiwan consoles only +#### 대만 (TWN) 기기 -If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Other regions may not follow this route.** +만약 대만 (TWN) 지역 기기 (시스템 버전 끝에 T가 표시됨, 예를 들어 11.15.0-39**T**)을 가지고 계시다면 이 작업을 해야 합니다. **나머지 지역 기기들은 따르면 않됩니다.** -Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) +[BannerBomb3 + Fredtool (타이완)](bannerbomb3-fredtool-(twn))으로 계속합니다 {: .notice--warning} \ No newline at end of file diff --git a/_pages/ms_MY/faq.txt b/_pages/ms_MY/faq.txt index b70cf6d621..993ffa5629 100644 --- a/_pages/ms_MY/faq.txt +++ b/_pages/ms_MY/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ms_MY/home.txt b/_pages/ms_MY/home.txt index 2bbac715fc..20054e084c 100644 --- a/_pages/ms_MY/home.txt +++ b/_pages/ms_MY/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ms_MY/installing-boot9strap-(fredtool).txt b/_pages/ms_MY/installing-boot9strap-(fredtool).txt index 1f04078491..7a803f4ae4 100644 --- a/_pages/ms_MY/installing-boot9strap-(fredtool).txt +++ b/_pages/ms_MY/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/ms_MY/region-changing.txt b/_pages/ms_MY/region-changing.txt index f356f188ab..e7b4e4212e 100644 --- a/_pages/ms_MY/region-changing.txt +++ b/_pages/ms_MY/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/nl_NL/faq.txt b/_pages/nl_NL/faq.txt index 19a8c942df..7c3598fb03 100644 --- a/_pages/nl_NL/faq.txt +++ b/_pages/nl_NL/faq.txt @@ -8,7 +8,6 @@ title: "Veelgestelde vragen" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/nl_NL/home.txt b/_pages/nl_NL/home.txt index ead1d8e61c..f3dd77dfb6 100644 --- a/_pages/nl_NL/home.txt +++ b/_pages/nl_NL/home.txt @@ -14,7 +14,6 @@ excerpt: "Een complete handleiding tot 3DS custom firmware,
van stock tot - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/nl_NL/installing-boot9strap-(fredtool).txt b/_pages/nl_NL/installing-boot9strap-(fredtool).txt index 36478d164e..804d239885 100644 --- a/_pages/nl_NL/installing-boot9strap-(fredtool).txt +++ b/_pages/nl_NL/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Boot9strap installeren (Fredtool)" ### Verplicht te lezen -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - Deze methode zal Seedminer gebruiken voor verder gebruik te maken van je `movable.sed` bestand om een DSiWare titel te decoderen voor het injecteren van een DSiWare titel in de DS Internet instellingen, om zo verdere toegang te krijgen tot jouw 3DS. Dit vereist een DSiWare backup, bijvoorbeeld van BannerBomb of DSiWare Dumper tool. Dit is een momenteel werkende uitvoering van de "FIRM partitions known-plaintext" exploit, waarvan je [hier](https://www.3dbrew.org/wiki/3DS_System_Flaws) de details kunt vinden. diff --git a/_pages/nl_NL/region-changing.txt b/_pages/nl_NL/region-changing.txt index e647ec3ed1..09000ee58b 100644 --- a/_pages/nl_NL/region-changing.txt +++ b/_pages/nl_NL/region-changing.txt @@ -6,7 +6,7 @@ title: "Regio veranderen" ### Verplicht te lezen -Dit is een extra gedeelte om de regio te veranderen van je CFW SysNAND. Dit wordt gedaan door het installeren van de 11.15.0 CTRTransfer image voor de regio waarnaar je wilt overschakelen. +Dit is een extra gedeelte om de regio te veranderen van je CFW SysNAND. Dit wordt gedaan door het installeren van de 11.15.0 CTRTransfer image voor de regio waarnaar je wilt overschakelen. After installing the image, you can update your device normally to the latest firmware (11.16.0). Merk wel op dat je regio veranderen bijna altijd compleet onnodig zal zijn omdat Luma3DS ook spellen uit een andere regio kan spelen, en ook individuele [Lokale emulatie](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Daarnaast worden ook NDS spellen uit andere regio's ondersteund door [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ Om de [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links op deze pagin #### Deel IV - FBI starten -1. Start de Download Play applicatie (dit [icoon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Start de Download Play applicatie (dit [icoon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Druk tegelijkertijd op (L) + (Down) + (Select) om het Rosalina menu te openen 1. Selecteer "Miscellaneous options" 1. Selecteer "Switch the hb. title to the current app." diff --git a/_pages/no_NO/faq.txt b/_pages/no_NO/faq.txt index 2b12da30d0..eabb4e6527 100644 --- a/_pages/no_NO/faq.txt +++ b/_pages/no_NO/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/no_NO/home.txt b/_pages/no_NO/home.txt index 50d1f75bc7..793087cc29 100644 --- a/_pages/no_NO/home.txt +++ b/_pages/no_NO/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/no_NO/installing-boot9strap-(fredtool).txt b/_pages/no_NO/installing-boot9strap-(fredtool).txt index efd9b84a9a..e11779b663 100644 --- a/_pages/no_NO/installing-boot9strap-(fredtool).txt +++ b/_pages/no_NO/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/no_NO/region-changing.txt b/_pages/no_NO/region-changing.txt index 2d215adc61..158352c4b5 100644 --- a/_pages/no_NO/region-changing.txt +++ b/_pages/no_NO/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/pl_PL/faq.txt b/_pages/pl_PL/faq.txt index 96921abba6..f5c3b5cd8f 100644 --- a/_pages/pl_PL/faq.txt +++ b/_pages/pl_PL/faq.txt @@ -8,7 +8,6 @@ title: "Często zadawane pytania (FAQ)" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/pl_PL/home.txt b/_pages/pl_PL/home.txt index 101584218e..a80df7386d 100644 --- a/_pages/pl_PL/home.txt +++ b/_pages/pl_PL/home.txt @@ -14,7 +14,6 @@ excerpt: "Kompletna instrukcja instalacji Custom Firmware na konsoli Nintendo 3D - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/pl_PL/installing-boot9strap-(fredtool).txt b/_pages/pl_PL/installing-boot9strap-(fredtool).txt index f949d2c6f5..8fa00d32f6 100644 --- a/_pages/pl_PL/installing-boot9strap-(fredtool).txt +++ b/_pages/pl_PL/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Instalacja Boot9strap (Fredtool)" ### Wymagana Lektura -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. To obecnie działająca implementacja luki: "FIRM partitions known-plaintext" szczegółowo opisanej [tutaj] (https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/pl_PL/region-changing.txt b/_pages/pl_PL/region-changing.txt index 867fef5f87..da667d2d70 100644 --- a/_pages/pl_PL/region-changing.txt +++ b/_pages/pl_PL/region-changing.txt @@ -6,7 +6,7 @@ title: "Zmiana Regionu Konsoli" ### Wymagana Lektura -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Uruchom aplikację Download Play (ta [ikona]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Naciśnij (L) + (Dół) + (Select) w tym samym momencie aby otworzyć menu Rosalina 1. Wybierz "Miscellaneous options" 1. Wybierz "Switch the hb. title to the current app." diff --git a/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt b/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt index f02d519ae1..84ee1c2826 100644 --- a/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ Para fazer isso, usamos a chave de criptografia do seu sistema (movable.sed) par Assim que tiver um backup de DSiWare, um aplicativo exploitable de DSiWare pode ser inserido no DS Download Play, que pode ser usado para instalar um custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! Se o seu console for de qualquer outra região, [escolha outro método](seedminer#next-steps). +Essas instruções são APENAS para consoles tailandeses (indicados por um T no final da versão do sistema, ex. 11.16.0-39T)! Se o seu console for de qualquer outra região, [escolha outro método](seedminer#next-steps). {: .notice--warning} ### O que você precisa diff --git a/_pages/pt_BR/ctrtransfer.txt b/_pages/pt_BR/ctrtransfer.txt index b7e574c631..9449b87ec9 100644 --- a/_pages/pt_BR/ctrtransfer.txt +++ b/_pages/pt_BR/ctrtransfer.txt @@ -84,7 +84,7 @@ Para utilizar os [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links de #### Seção III - Iniciando o FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) +1. Abra o aplicativo Download Play (este [ícone]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Aperte (L) + (Baixo) + (Select) ao mesmo tempo para abrir o menu do Rosalina 1. Selecione "Miscellaneous options" 1. Selecione "Switch the hb. title to the current app." diff --git a/_pages/pt_BR/faq.txt b/_pages/pt_BR/faq.txt index 0ce3220ede..da5e192a60 100644 --- a/_pages/pt_BR/faq.txt +++ b/_pages/pt_BR/faq.txt @@ -4,12 +4,11 @@ title: "FAQ" {% include toc title="Tabela de Conteúdo"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Veja aqui o que você deve saber: +**A atualização de firmware 11.16.0 foi lançada recentemente**. Veja aqui o que você deve saber: -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +- Se o seu dispositivo estiver executando *Luma 11.0*, é *100% seguro* atualizar. Você pode checar sua versão do Luma apertando e segurando (Select) enquanto inicia o console. +- Se seu dispositivo estiver em uma versão do Luma mais antiga, você deve [atualizar o Luma](checking-for-cfw) antes de atualizar seu dispositivo para a 11.16.0. +- Se seu dispositivo ainda não tiver custom firmware, você ainda pode instalá-la nesta versão gratuitamente sem qualquer hardware adicional, mas o método recomendado foi alterado. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -17,7 +16,7 @@ title: "FAQ" ## FAQ Pré-Instalação ### **P:** *Eu estou na versão mais recente do sistema. É possível aplicar hack em meu sistema sem hardware externo?* -**R:** Sim! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). +**R:** Sim! O firmware mais recente (11.16.0) tem um método gratuito de obter CFW chamado [Seedminer](seedminer). #### **P:** *Com quais dispositivos este guia é compatível?* **R:** As instruções são as mesmas para todos os dispositivos de varejo 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL e New 2DS XL. Se a versão do seu sistema for exibida como "0.0.0-0", então você talvez tenha um dispositivo de desenvolvedor. diff --git a/_pages/pt_BR/get-started.txt b/_pages/pt_BR/get-started.txt index d6dd1f365c..fcb35b6eec 100644 --- a/_pages/pt_BR/get-started.txt +++ b/_pages/pt_BR/get-started.txt @@ -24,7 +24,7 @@ Se você ver um menu incomum, PARE - você já tem custom firmware! Continue [da #### Seção III - Selecione um Método Use a tabela de versões abaixo para selecionar um método. Algumas coisas a considerar: - + A tabela de versões abaixo é *inclusiva*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + + A tabela de versões abaixo é *inclusiva*. Por exemplo, "de 11.4.0 até 11.15.0" inclui 11.4.0, 11.15.0, e todas as versões entre elas. + As versões de software não funcionam da mesma forma que decimais. Versões 11.10.0 e adiante são mais recentes que 11.3.0, e sendo assim não são compatíveis com Soundhax. + O número e a letra após a versão do sistema não são importantes. + Não importa o método que você siga, o resultado final é o mesmo (instalação boot9strap+Luma3DS custom firmware no firmware mais recente do sistema). @@ -42,11 +42,11 @@ Use a tabela de versões abaixo para selecionar um método. Algumas coisas a con - 11.16.0 (latest version) + 11.16.0 (versão mais recente) Seedminer - 11.4.0 to 11.15.0 + 11.4.0 até 11.15.0 Atualize seu 3DS para a versão mais recente através da Configuração do Console diff --git a/_pages/pt_BR/home.txt b/_pages/pt_BR/home.txt index ab3c41b467..08b05ee1e8 100644 --- a/_pages/pt_BR/home.txt +++ b/_pages/pt_BR/home.txt @@ -10,12 +10,11 @@ excerpt: "Um guia completo de Custom Firmware para o 3DS,
de varejo até --- {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Veja aqui o que você deve saber: +**A atualização de firmware 11.16.0 foi lançada recentemente**. Veja aqui o que você deve saber: -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +- Se o seu dispositivo estiver executando *Luma 11.0*, é *100% seguro* atualizar. Você pode checar sua versão do Luma apertando e segurando (Select) enquanto inicia o console. +- Se seu dispositivo estiver em uma versão do Luma mais antiga, você deve [atualizar o Luma](checking-for-cfw) antes de atualizar seu dispositivo para a 11.16.0. +- Se seu dispositivo ainda não tiver custom firmware, você ainda pode instalá-la nesta versão gratuitamente sem qualquer hardware adicional, mas o método recomendado foi alterado. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/pt_BR/installing-boot9strap-(fredtool).txt b/_pages/pt_BR/installing-boot9strap-(fredtool).txt index f1b4a634d0..6eda5bff52 100644 --- a/_pages/pt_BR/installing-boot9strap-(fredtool).txt +++ b/_pages/pt_BR/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Instalando o Boot9strap (Fredtool)" ### Leitura Obrigatória -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - Este método de usar o Seedminer para exploiting usa seu arquivo `movable.sed` para descriptografar qualquer aplicativo DSiWare para fins de injetar um título de DSiWare exploitable nas Configurações de Internet do DS. Isto requer que você tenha um backup do DSiWare, por exemplo, do BannerBomb ou DSiWare Dumper tool. Esta é uma implementação funcional do exploit "FIRM partitions known-plaintext" detalhado [aqui](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt b/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt index 722259ee1e..2ff5b912b4 100644 --- a/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt @@ -6,7 +6,7 @@ title: "Instalando boot9strap (kartdlphax)" ### Leitura Obrigatória -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +As instruções nesta página não funcionam atualmente no firmware mais recente (11.16.0). Se você foi direcionado a essa página, [retorne a Começando](get-started) ou entre no [Discord do Nintendo Homebrew](https://discord.gg/MWxPgEp) e peça, em inglês, por ajuda. {: .notice--warning} kartdlphax é um exploit para o modo Download Play de Mario Kart 7. Pode ser usado com universal-otherapp para instalar custom firmware no dispositivo de destino. diff --git a/_pages/pt_BR/installing-boot9strap-(pichaxx).txt b/_pages/pt_BR/installing-boot9strap-(pichaxx).txt index 8865390eb0..abccac21b1 100644 --- a/_pages/pt_BR/installing-boot9strap-(pichaxx).txt +++ b/_pages/pt_BR/installing-boot9strap-(pichaxx).txt @@ -6,7 +6,7 @@ title: "Instalando boot9strap (PicHaxx)" ### Leitura Obrigatória -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +As instruções nesta página não funcionam atualmente no firmware mais recente (11.16.0). Se você foi direcionado a essa página, [retorne a Seedminer](Seedminer) ou entre no [Discord do Nintendo Homebrew](https://discord.gg/MWxPgEp) e peça, em inglês, por ajuda. {: .notice--warning} Este método de usar o Seedminer para exploiting usa seu `movable.sed` para manipular um arquivo de save personalizado para Pokémon Picross, que pode então ser usado com universal-otherapp para executar o SafeB9SInstaller. diff --git a/_pages/pt_BR/installing-boot9strap-(usm).txt b/_pages/pt_BR/installing-boot9strap-(usm).txt index bcec08d50f..6e325bc28a 100644 --- a/_pages/pt_BR/installing-boot9strap-(usm).txt +++ b/_pages/pt_BR/installing-boot9strap-(usm).txt @@ -16,7 +16,7 @@ Assim que o perfil Wi-Fi for injetado, usaremos o SAFE_MODE, que é um recurso d Essas instruções funcionam nas versões de consoles EUA, Europa, Japão e Coréia, indicadas pelas letras U, E, J ou K após a versão do sistema. -If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +Se os seus botões (Gatilho Esquerdo/Direito), (Botão direcional pra cima), ou (A) não funcionarem, você precisará seguir [um ramo alternativo de Seedminer](bannerbomb3). Para obter ajuda com isso, entre no [Discord do Nintendo Homebrew](https://discord.gg/MWxPgEp) e peça, em inglês, por ajuda. {: .notice--warning} ### O que é necessário diff --git a/_pages/pt_BR/region-changing.txt b/_pages/pt_BR/region-changing.txt index b57aef9584..2794f950ce 100644 --- a/_pages/pt_BR/region-changing.txt +++ b/_pages/pt_BR/region-changing.txt @@ -6,7 +6,7 @@ title: "Mudança de Região" ### Leitura Obrigatória -Esta é uma seção adicional para mudar a região da sua SysNAND com CFW. Isto é feito através da instalação da imagem CTRTransfer 11.15.0 da região para qual você deseja trocar. +Esta é uma seção adicional para mudar a região da sua SysNAND com CFW. Isto é feito através da instalação da imagem CTRTransfer 11.15.0 da região para qual você deseja trocar. Após instalar a imagem, você pode atualizar seu dispositivo normalmente para o firmware mais recente (11.16.0). Note que a mudança de região é quase completamente desnecessária uma vez que o Luma3DS suporta jogos de outras regiões e aplicativos inidividuais através de [Locale Emulation] (https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Além, disso, rodar jogos do Nintendo DS com idiomas de outras regiões é possível através do [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -119,7 +119,7 @@ Para utilizar os [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links de #### Seção IV - Iniciando o FBI -1. Abra o aplicativo Download Play (este [ícone]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Abra o aplicativo Download Play (este [ícone]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Aperte (L) + (Baixo) + (Select) ao mesmo tempo para abrir o menu do Rosalina 1. Selecione "Miscellaneous options" 1. Selecione "Switch the hb. title to the current app." diff --git a/_pages/pt_BR/seedminer.txt b/_pages/pt_BR/seedminer.txt index dc5541b5bc..ccd7b2b214 100644 --- a/_pages/pt_BR/seedminer.txt +++ b/_pages/pt_BR/seedminer.txt @@ -61,7 +61,7 @@ ___ Assim que você tiver a chave de criptografia do seu dispositivo (`movable.sed`), você o usará em conjunto com outros exploits para instalar custom firmware no seu 3DS. -#### unSAFE_MODE (Recommended) +#### unSAFE_MODE (Recomendado) Esse método que utiliza o Seedminer para exploiting usa o seu arquivo `movable.sed` para tirar vantagem do firmware SAFE_MODE presente em todas as unidades de 3DS. @@ -70,9 +70,9 @@ Continue em [Instalando boot9strap (USM)](installing-boot9strap-(usm)) ___ -#### Taiwan consoles only +#### Apenas consoles tailandeses -If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Other regions may not follow this route.** +Se você tiver um dispositivo tailandês (indicado com T no final da versão do sistema, como 11.15.0-39**T**), você deve seguir esta rota. **Outras regiões não devem seguir esta rota.** -Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) +Continue em [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) {: .notice--warning} \ No newline at end of file diff --git a/_pages/pt_PT/faq.txt b/_pages/pt_PT/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/pt_PT/faq.txt +++ b/_pages/pt_PT/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/pt_PT/home.txt b/_pages/pt_PT/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/pt_PT/home.txt +++ b/_pages/pt_PT/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/pt_PT/installing-boot9strap-(fredtool).txt b/_pages/pt_PT/installing-boot9strap-(fredtool).txt index dffe111f3b..baaae7774b 100644 --- a/_pages/pt_PT/installing-boot9strap-(fredtool).txt +++ b/_pages/pt_PT/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Leitura Obrigatória -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/pt_PT/region-changing.txt b/_pages/pt_PT/region-changing.txt index 5adb5777f9..419fffb312 100644 --- a/_pages/pt_PT/region-changing.txt +++ b/_pages/pt_PT/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Leitura Obrigatória -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/ro_RO/faq.txt b/_pages/ro_RO/faq.txt index 5e249e7b17..40e11b34dc 100644 --- a/_pages/ro_RO/faq.txt +++ b/_pages/ro_RO/faq.txt @@ -8,7 +8,6 @@ title: "Întrebări frecvente" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ro_RO/home.txt b/_pages/ro_RO/home.txt index 9f7310373f..e8908af901 100644 --- a/_pages/ro_RO/home.txt +++ b/_pages/ro_RO/home.txt @@ -14,7 +14,6 @@ excerpt: "Un ghid complet spre firmware personalizat pentru 3DS,
de la stoc - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ro_RO/installing-boot9strap-(fredtool).txt b/_pages/ro_RO/installing-boot9strap-(fredtool).txt index 17fc878d61..532d49df60 100644 --- a/_pages/ro_RO/installing-boot9strap-(fredtool).txt +++ b/_pages/ro_RO/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Instalând Boot9strap (Fredtool)" ### Lectură obligatorie -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - Această metodă de a folosi Seedminer pentru mai multă exploatare utilizează fişierul `movable.sed` pentru a decripta orice titlu de DSiWare cu scopul de a injecta un titlu DSiWare exploatabil în aplicaţia DS Internet Settings. Aceasta are nevoie de o copie de rezervă DSiWare, de exemplu de la BannerBomb sau unealta DSiWare Dumper. Acest lucru este în prezent o implementare a exploit-ului "Partiții FIRM de text simplu" detaliat [aici](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/ro_RO/region-changing.txt b/_pages/ro_RO/region-changing.txt index dd6b60e8a4..e36a1d2019 100644 --- a/_pages/ro_RO/region-changing.txt +++ b/_pages/ro_RO/region-changing.txt @@ -6,7 +6,7 @@ title: "Schimb de regiune" ### Lectură obligatorie -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Lansați aplicaţia Download Play (această [iconiță]({{"/images/download-play-icon.png" | absolute_url}}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Apăsați (L) + (Jos) + (Select) în același timp ca să deschideți meniul Rosalina 1. Selectați "Miscellaneous options" 1. Selectați "Switch the hb. title to the current app" diff --git a/_pages/ru_RU/faq.txt b/_pages/ru_RU/faq.txt index 05ac489f60..91e29dcd33 100644 --- a/_pages/ru_RU/faq.txt +++ b/_pages/ru_RU/faq.txt @@ -8,7 +8,6 @@ title: "Вопросы и ответы" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ru_RU/home.txt b/_pages/ru_RU/home.txt index 37b365a767..45f85d2d0f 100644 --- a/_pages/ru_RU/home.txt +++ b/_pages/ru_RU/home.txt @@ -14,7 +14,6 @@ excerpt: "Полное руководство по прошивке 3DS,
- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/ru_RU/installing-boot9strap-(fredtool).txt b/_pages/ru_RU/installing-boot9strap-(fredtool).txt index a30665bae5..528f383711 100644 --- a/_pages/ru_RU/installing-boot9strap-(fredtool).txt +++ b/_pages/ru_RU/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Установка Boot9strap (Fredtool)" ### Обязательно к прочтению -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - Этот метод дальнейшей эксплуатации Seedminer использует ваш файл `movable.sed` для расшифровки любого тайтла DSiWare в целях инъекции уязвимого тайтла DSiWare в приложение DS Internet Settings. Этот метод требует наличия бэкапа DSiWare, полученного с помощью BannerBomb или DSiWare Dumper. Это рабочая реализация эксплойта "FIRM partitions known-plaintext". Подробнее о нем [здесь](https://www.3dbrew.org/wiki/3DS_System_Flaws) (англ.). diff --git a/_pages/ru_RU/region-changing.txt b/_pages/ru_RU/region-changing.txt index 3d1e3d483e..2f155c83cb 100644 --- a/_pages/ru_RU/region-changing.txt +++ b/_pages/ru_RU/region-changing.txt @@ -6,7 +6,7 @@ title: "Смена региона" ### Обязательно к прочтению -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Запустите приложение Загружаемая игра (этот [значок]({{ "/images/download-play-icon.png" | absolute_url }})) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Нажмите (L) + (Вниз) + (Select) одновременно чтобы открыть меню Rosalina 1. Выберите "Miscellaneous options" 1. Выберите "Switch the hb. title to the current app." diff --git a/_pages/sv_SE/faq.txt b/_pages/sv_SE/faq.txt index 6b7e9b987f..c43a8d3a97 100644 --- a/_pages/sv_SE/faq.txt +++ b/_pages/sv_SE/faq.txt @@ -8,7 +8,6 @@ title: "Vanliga Frågor" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/sv_SE/home.txt b/_pages/sv_SE/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/sv_SE/home.txt +++ b/_pages/sv_SE/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/sv_SE/installing-boot9strap-(fredtool).txt b/_pages/sv_SE/installing-boot9strap-(fredtool).txt index 23f1793d86..d417111f22 100644 --- a/_pages/sv_SE/installing-boot9strap-(fredtool).txt +++ b/_pages/sv_SE/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/sv_SE/region-changing.txt b/_pages/sv_SE/region-changing.txt index d4e220ce4c..3e41cfb77c 100644 --- a/_pages/sv_SE/region-changing.txt +++ b/_pages/sv_SE/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/th_TH/faq.txt b/_pages/th_TH/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/th_TH/faq.txt +++ b/_pages/th_TH/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/th_TH/home.txt b/_pages/th_TH/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/th_TH/home.txt +++ b/_pages/th_TH/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/th_TH/installing-boot9strap-(fredtool).txt b/_pages/th_TH/installing-boot9strap-(fredtool).txt index 3b0273de72..6d973b080b 100644 --- a/_pages/th_TH/installing-boot9strap-(fredtool).txt +++ b/_pages/th_TH/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/th_TH/region-changing.txt b/_pages/th_TH/region-changing.txt index 1dcfd12f73..e3d0b3d905 100644 --- a/_pages/th_TH/region-changing.txt +++ b/_pages/th_TH/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/tr_TR/faq.txt b/_pages/tr_TR/faq.txt index 614c2e3876..df2912f8df 100644 --- a/_pages/tr_TR/faq.txt +++ b/_pages/tr_TR/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/tr_TR/home.txt b/_pages/tr_TR/home.txt index 899d11609a..68cf2356ad 100644 --- a/_pages/tr_TR/home.txt +++ b/_pages/tr_TR/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/tr_TR/installing-boot9strap-(fredtool).txt b/_pages/tr_TR/installing-boot9strap-(fredtool).txt index 834b7246bd..db049e3742 100644 --- a/_pages/tr_TR/installing-boot9strap-(fredtool).txt +++ b/_pages/tr_TR/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Okumanız Gerekli -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/tr_TR/region-changing.txt b/_pages/tr_TR/region-changing.txt index 2ad2fe4dfb..122645476b 100644 --- a/_pages/tr_TR/region-changing.txt +++ b/_pages/tr_TR/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Okumanız Gerekli -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/uk_UA/faq.txt b/_pages/uk_UA/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/uk_UA/faq.txt +++ b/_pages/uk_UA/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/uk_UA/home.txt b/_pages/uk_UA/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/uk_UA/home.txt +++ b/_pages/uk_UA/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/uk_UA/installing-boot9strap-(fredtool).txt b/_pages/uk_UA/installing-boot9strap-(fredtool).txt index 3b0273de72..6d973b080b 100644 --- a/_pages/uk_UA/installing-boot9strap-(fredtool).txt +++ b/_pages/uk_UA/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/uk_UA/region-changing.txt b/_pages/uk_UA/region-changing.txt index 1dcfd12f73..e3d0b3d905 100644 --- a/_pages/uk_UA/region-changing.txt +++ b/_pages/uk_UA/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/vi_VN/faq.txt b/_pages/vi_VN/faq.txt index d5095b77cb..a68a790ff5 100644 --- a/_pages/vi_VN/faq.txt +++ b/_pages/vi_VN/faq.txt @@ -8,7 +8,6 @@ title: "FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/vi_VN/home.txt b/_pages/vi_VN/home.txt index 8f95081a11..6c1f9a0b3f 100644 --- a/_pages/vi_VN/home.txt +++ b/_pages/vi_VN/home.txt @@ -14,7 +14,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/vi_VN/installing-boot9strap-(fredtool).txt b/_pages/vi_VN/installing-boot9strap-(fredtool).txt index 3b0273de72..6d973b080b 100644 --- a/_pages/vi_VN/installing-boot9strap-(fredtool).txt +++ b/_pages/vi_VN/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/vi_VN/region-changing.txt b/_pages/vi_VN/region-changing.txt index 1dcfd12f73..e3d0b3d905 100644 --- a/_pages/vi_VN/region-changing.txt +++ b/_pages/vi_VN/region-changing.txt @@ -6,7 +6,7 @@ title: "Region Changing" ### Required Reading -This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. +This is an add-on section for region changing your CFW SysNAND. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your device normally to the latest firmware (11.16.0). Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section IV - Launching FBI -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." diff --git a/_pages/zh_CN/faq.txt b/_pages/zh_CN/faq.txt index 052a4bed71..ea99906a05 100644 --- a/_pages/zh_CN/faq.txt +++ b/_pages/zh_CN/faq.txt @@ -8,7 +8,6 @@ title: "常见问题" - 如果你的主机正在使用的 Luma 版本为 **11.0**，那么升级系统是 **100%** 安全的。 你可以在关机状态下按住 SELECT 键，然后按下电源键开机以检查主机的 Luma 版本。 - 如果你的主机运行的 Luma 低于此版本，则你应该在更新系统到 11.16.0 前先[更新 Luma](checking-for-cfw)。 -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest)（用于运行 PLG 插件和无线串流）需要等待其适配更新后才能在 11.16.0 上运行。 如果你需要使用这个工具，则建议等待其更新后再升级主机至 11.16.0。 - 如果你的主机还没安装好自制固件，则你可以继续安装它且不需要任何额外的外设，不过推荐的方法有所更改。 {% endcapture %} diff --git a/_pages/zh_CN/home.txt b/_pages/zh_CN/home.txt index fde85fd52c..ace74a636d 100644 --- a/_pages/zh_CN/home.txt +++ b/_pages/zh_CN/home.txt @@ -14,7 +14,6 @@ excerpt: "最完整的 3DS 破解手册，
教你从原版主机破解成b - 如果你的主机正在使用的 Luma 版本为 **11.0**，那么升级系统是 **100%** 安全的。 你可以在关机状态下按住 SELECT 键，然后按下电源键开机以检查主机的 Luma 版本。 - 如果你的主机运行的 Luma 低于此版本，则你应该在更新系统到 11.16.0 前先[更新 Luma](checking-for-cfw)。 -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest)（用于运行 PLG 插件和无线串流）需要等待其适配更新后才能在 11.16.0 上运行。 如果你需要使用这个工具，则建议等待其更新后再升级主机至 11.16.0。 - 如果你的主机还没安装好自制固件，则你可以继续安装它且不需要任何额外的外设，不过推荐的方法有所更改。 {% endcapture %} diff --git a/_pages/zh_CN/installing-boot9strap-(fredtool).txt b/_pages/zh_CN/installing-boot9strap-(fredtool).txt index 75b4fae6ff..2a3bc5f267 100644 --- a/_pages/zh_CN/installing-boot9strap-(fredtool).txt +++ b/_pages/zh_CN/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "安装 Boot9strap（通过 Fredtool）" ### 重要事项 -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - 本章节 Seedminer 将使用你的 `movable.sed` 文件来解密所有的 DSiWare 程序，以便在3DS中内置的 DS 网络设定中注入修改后的 DSiWare 程序。 这个操作需要你有任何的 DSiWare 备份，比如 BannerBomb 或 DSiWare Dumper 工具导出的。 本教程是使用 “FIRM partitions known-plaintext” 漏洞来进行破解的， 欲知相关资料请查阅[这里](https://www.3dbrew.org/wiki/3DS_System_Flaws)。 diff --git a/_pages/zh_CN/region-changing.txt b/_pages/zh_CN/region-changing.txt index 5815eca9e4..ee7191ca19 100644 --- a/_pages/zh_CN/region-changing.txt +++ b/_pages/zh_CN/region-changing.txt @@ -6,7 +6,7 @@ title: "区域变更" ### 重要事项 -本章节将介绍如何更改 SysNAND 的系统区域。 这是通过安装你想要切换到的地区的 11.15.0 CTRTransfer 镜像而达成的。 +本章节将介绍如何更改 SysNAND 的系统区域。 这是通过安装你想要切换到的地区的 11.15.0 CTRTransfer 镜像而达成的。 After installing the image, you can update your device normally to the latest firmware (11.16.0). 注意，Luma3DS 本身就自带了[区域模拟](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)的功能，这使得变更区域几乎是不必要的。 顺带一提，你可以使用 [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases) 来运行其他区域的 NDS 游戏。 @@ -118,7 +118,7 @@ title: "区域变更" #### 第四步 – 启动 FBI 应用 -1. 启动“下载通信(Download Play)”程序 (它长[这样]({{ "/images/download-play-icon.png" | absolute_url }}) +1. 启动“下载通信（Download Play）”程序（它长[这样]({{ "/images/download-play-icon.png" | absolute_url }})） 1. 同时按下“L”+“下”+“Select” 键来打开 Rosalina 菜单 1. 选择 “Miscellaneous options” 1. 选择 “Switch the hb. title to the current app.” diff --git a/_pages/zh_TW/faq.txt b/_pages/zh_TW/faq.txt index d516b25704..3ccf665d2b 100644 --- a/_pages/zh_TW/faq.txt +++ b/_pages/zh_TW/faq.txt @@ -8,7 +8,6 @@ title: "常見問題 FAQ" - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/zh_TW/home.txt b/_pages/zh_TW/home.txt index ff7cf244b1..aaba0e3283 100644 --- a/_pages/zh_TW/home.txt +++ b/_pages/zh_TW/home.txt @@ -14,7 +14,6 @@ excerpt: "最完整的 3DS 改機教戰手冊，
教您如何從原廠主 - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. - If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %} diff --git a/_pages/zh_TW/installing-boot9strap-(fredtool).txt b/_pages/zh_TW/installing-boot9strap-(fredtool).txt index 62812c4743..eccd8f2e9d 100644 --- a/_pages/zh_TW/installing-boot9strap-(fredtool).txt +++ b/_pages/zh_TW/installing-boot9strap-(fredtool).txt @@ -6,9 +6,6 @@ title: "安裝 Boot9strap (透過 Fredtool)" ### 必讀事項 -The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--warning} - Seedminer 將透過您的 `movable.sed` 檔案來解密您主機上任何 DSiWare 的程式，以便在 DS 網路設定中注入修改後的 DSiWare 程式。 這需要您有 DSiWare 的 備份檔，比如利用 BannerBomb 或 DSiWare Dumper 工具導出的。 此方法是透過『FIRM partitions known-plaintext』漏洞所達成的。詳情請見[此](https://www.3dbrew.org/wiki/3DS_System_Flaws)。 diff --git a/_pages/zh_TW/region-changing.txt b/_pages/zh_TW/region-changing.txt index 8adcfabba6..05149b2899 100644 --- a/_pages/zh_TW/region-changing.txt +++ b/_pages/zh_TW/region-changing.txt @@ -6,7 +6,7 @@ title: "區碼變更" ### 必讀事項 -This is an add-on section for region changing your CFW SysNAND. 這是透過安裝所選區域的 11.15.0 CTRTransfer 鏡像檔達成的。 +This is an add-on section for region changing your CFW SysNAND. 這是透過安裝所選區域的 11.15.0 CTRTransfer 鏡像檔達成的。 After installing the image, you can update your device normally to the latest firmware (11.16.0). **請注意，區碼變更通常是不需要的，因為 Luma3DS 本身就支援跨區遊玩及程式[語碼模擬](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)的功能。** 另外，您也可透過[TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases)來運行非支援語系的 NDS 遊戲。 @@ -118,7 +118,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### 第四節 — 啟動 FBI 管理器 -1. 啟動『下載通信(Download Play)』程式 (如此圖[icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})) 1. 同時按下『L』+『下』+『Select』鍵以啟動 Rosalina 選單 1. 選擇『Miscellaneous options』 1. 選擇『Switch the hb. title to the current app.』