make steps in the correct order
doesn't actually matter for markdown, but people were getting confused
This commit is contained in:
Plailect
Plailect
parent
d93b19b725
commit
bead19afa1
|
|
@ -71,18 +71,18 @@ You should be in Decrypt9 for these steps.
|
|||
**If you do not have enough space to create the backup, you can either backup to a different SD card or clear space on your current SD card by pressing (Select) on the Decrypt9WIP main menu to eject your SD card and allow it to be swapped with a different SD card or to clear space on your current SD card**
|
||||
{: .notice--danger}
|
||||
|
||||
4. Go to "SysNAND Options", then "CTRNAND Transfer", then "Auto CTRNAND Transfer"
|
||||
5. Select the 2.1.0 ctrtransfer image when prompted by pressing (A), then input the key combo given
|
||||
6. If you do not already have a NAND backup, **backup SysNAND to `NANDmin.bin` when prompted by pressing (A)**
|
||||
1. Go to "SysNAND Options", then "CTRNAND Transfer", then "Auto CTRNAND Transfer"
|
||||
2. Select the 2.1.0 ctrtransfer image when prompted by pressing (A), then input the key combo given
|
||||
3. If you do not already have a NAND backup, **backup SysNAND to `NANDmin.bin` when prompted by pressing (A)**
|
||||
+ **Having a backup of _your_ device's NAND is REQUIRED.**
|
||||
+ **Skipping this backup will result in the LOSS of all installed games and saves!**
|
||||
7. Allow the transfer process to proceed automatically, this may take some time
|
||||
8. Once the transfer is complete, press (B) to go back
|
||||
9. Press (Select) to eject your SD card
|
||||
9. Delete the 2.1.0 ctrtransfer image `.bin` and `.bin.sha` from the `/files9/` folder on your SD card
|
||||
11. Press (Start) to reboot without reinserting your SD card
|
||||
4. Allow the transfer process to proceed automatically, this may take some time
|
||||
5. Once the transfer is complete, press (B) to go back
|
||||
6. Press (Select) to eject your SD card
|
||||
7. Delete the 2.1.0 ctrtransfer image `.bin` and `.bin.sha` from the `/files9/` folder on your SD card
|
||||
8. Press (Start) to reboot without reinserting your SD card
|
||||
+ While on 2.1.0, the device will black screen on boot if your SD card is inserted before the home menu loads
|
||||
12. Reinsert your SD card into your 3DS after the home menu loads
|
||||
9. Reinsert your SD card into your 3DS after the home menu loads
|
||||
+ Every time the device is rebooted on 2.1.0, you will need to take out your SD card before boot and put it back in after the home menu loads
|
||||
+ This will be fixed once you restore your device in the next page
|
||||
|
||||
|
|
|
|||
|
|
@ -33,35 +33,35 @@ Because the point of the 9.2.0 ctrtransfer is to troubleshoot issues caused by t
|
|||
##### Section I - Prep work
|
||||
|
||||
1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin`
|
||||
4. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card
|
||||
5. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin`
|
||||
6. Reinsert your SD card into your 3DS
|
||||
2. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card
|
||||
3. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin`
|
||||
4. Reinsert your SD card into your 3DS
|
||||
|
||||
##### Section II - Backup tickets and config save
|
||||
|
||||
5. Open Decrypt9 from arm9loaderhax by holding (X) during boot
|
||||
6. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)"
|
||||
7. Press (Select) to eject your SD card, then put it in your computer
|
||||
8. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-"
|
||||
1. Open Decrypt9 from arm9loaderhax by holding (X) during boot
|
||||
2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)"
|
||||
3. Press (Select) to eject your SD card, then put it in your computer
|
||||
4. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-"
|
||||
+ If none start with "00-", then just delete all of them
|
||||
10. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu
|
||||
11. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin"
|
||||
5. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu
|
||||
6. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin"
|
||||
|
||||
##### Section III - ctrtransfer
|
||||
|
||||
8. Go to "SysNAND Options", then "CTRNAND Transfer", then "Auto CTRNAND Transfer"
|
||||
9. Select the 9.2.0 ctrtransfer image when prompted by pressing (A), then input the key combo given
|
||||
10. If you do not already have a NAND backup, **Backup SysNAND to `NANDmin.bin` when prompted by pressing (A)**
|
||||
11. Allow the transfer process to proceed automatically, this may take some time
|
||||
12. Once the transfer is complete, press (Select) to eject your SD card
|
||||
13. Put your SD card in your computer, then copy `NANDmin.bin` and `NANDmin.bin.sha` from the `/files9/` folder on your SD card to a safe location
|
||||
1. Go to "SysNAND Options", then "CTRNAND Transfer", then "Auto CTRNAND Transfer"
|
||||
2. Select the 9.2.0 ctrtransfer image when prompted by pressing (A), then input the key combo given
|
||||
3. If you do not already have a NAND backup, **Backup SysNAND to `NANDmin.bin` when prompted by pressing (A)**
|
||||
4. Allow the transfer process to proceed automatically, this may take some time
|
||||
5. Once the transfer is complete, press (Select) to eject your SD card
|
||||
6. Put your SD card in your computer, then copy `NANDmin.bin` and `NANDmin.bin.sha` from the `/files9/` folder on your SD card to a safe location
|
||||
+ Make backups in multiple locations
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ **Your backup should match one of the sizes on [this](nand-size) page; if it does not, you should delete it and make a new one!**
|
||||
14. Delete the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the `/files9/` folder on your SD card
|
||||
15. Reinsert your SD card into your 3DS
|
||||
16. Press (Start) to reboot
|
||||
17. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
|
||||
7. Delete the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the `/files9/` folder on your SD card
|
||||
8. Reinsert your SD card into your 3DS
|
||||
9. Press (Start) to reboot
|
||||
10. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
|
||||
+ Updates while using A9LH + Luma (what you have) are safe, stop asking about it
|
||||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
|
||||
|
|
@ -73,12 +73,12 @@ Because the point of the 9.2.0 ctrtransfer is to troubleshoot issues caused by t
|
|||
|
||||
##### Section V - Injecting FBI
|
||||
|
||||
2. Go to "SysNAND Options", then "Miscellaneous", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)**
|
||||
3. Press (B), then select the "Health&Safety Inject" option
|
||||
8. Select the FBI injectable `.app` for your region
|
||||
1. Go to "SysNAND Options", then "Miscellaneous", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)**
|
||||
2. Press (B), then select the "Health&Safety Inject" option
|
||||
3. Select the FBI injectable `.app` for your region
|
||||
4. Press (A) and confirm to inject
|
||||
9. Press (Start) to reboot
|
||||
10. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi)
|
||||
5. Press (Start) to reboot
|
||||
6. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi)
|
||||
|
||||
##### Section VI - Reinstalling Tickets
|
||||
|
||||
|
|
|
|||
|
|
@ -84,18 +84,18 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
2. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on **the source 3DS**'s' SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin`
|
||||
3. Copy the `.app` from DSiWare injection `.zip` to the root of **the source 3DS**'s SD card
|
||||
4. Copy `savedata` folder from DSiWare injection `.zip` to the root of **the source 3DS**'s SD card
|
||||
4. Reinsert **the source 3DS**'s SD card
|
||||
5. On **the source 3DS**, hold Start on boot to launch Hourglass9
|
||||
6. Go to SysNAND Options, then SysNAND Backup/Restore, then backup **(min size)** SysNAND to `NANDmin.bin`
|
||||
7. Press (Select) on the main menu to eject **the source 3DS**'s SD card, then put it in your computer
|
||||
8. Copy `NANDmin.bin` and `NANDmin.bin.sha` from the `/files9/` folder on your SD card to a safe location
|
||||
5. Reinsert **the source 3DS**'s SD card
|
||||
6. On **the source 3DS**, hold Start on boot to launch Hourglass9
|
||||
7. Go to SysNAND Options, then SysNAND Backup/Restore, then backup **(min size)** SysNAND to `NANDmin.bin`
|
||||
8. Press (Select) on the main menu to eject **the source 3DS**'s SD card, then put it in your computer
|
||||
9. Copy `NANDmin.bin` and `NANDmin.bin.sha` from the `/files9/` folder on your SD card to a safe location
|
||||
+ Make backups in multiple locations
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ **Your backup should match one of the sizes on [this](nand-size) page; if it does not, you should delete it and make a new one!**
|
||||
9. Put **the target 3DS**'s SD card into your computer
|
||||
10. **Backup every file on both 3DS's SD cards to two separate folders on your computer (keep track of which is which)!**
|
||||
11. Reinsert each SD card back into their corresponding 3DS
|
||||
12. Press (Start) to reboot
|
||||
10. Put **the target 3DS**'s SD card into your computer
|
||||
11. **Backup every file on both 3DS's SD cards to two separate folders on your computer (keep track of which is which)!**
|
||||
12. Reinsert each SD card back into their corresponding 3DS
|
||||
13. Press (Start) to reboot
|
||||
|
||||
##### Section II - Backup DSiWare
|
||||
|
||||
|
|
@ -131,19 +131,19 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
15. Select "Mount as FAT image"
|
||||
+ If you do not see this option, ensure you are running the latest GodMode9 release
|
||||
+ If you still do not see this option, please [report this bug](https://github.com/d0k3/GodMode9/issues)
|
||||
19. This will have moved you back to the main menu
|
||||
20. Navigate to `SDCARD`
|
||||
13. Press (Y) on the file(s) in the `savedata` folder to copy them
|
||||
16. This will have moved you back to the main menu
|
||||
17. Navigate to `SDCARD`
|
||||
18. Press (Y) on the file(s) in the `savedata` folder to copy them
|
||||
+ If there is a `savedata` folder inside of the `savedata` folder, it is not by mistake. You should copy the second `savedata` folder, not the files inside of that.
|
||||
14. Press (B) to go back to the main menu
|
||||
15. Navigate to `FAT IMAGE`
|
||||
17. Use the (X) button to delete everything inside of `FAT IMAGE`
|
||||
16. Press (Y) to paste a copy of **the contents of** the `savedata` folder to `FAT IMAGE`
|
||||
17. Select "Copy path(s)"
|
||||
18. Press (A) to unlock image writing, then input the key combo given
|
||||
19. Press (Start) to reboot
|
||||
20. Launch your DSiWare game on **the source 3DS**
|
||||
21. Tap the screen or press any button to start the game and test if the save is functional
|
||||
19. Press (B) to go back to the main menu
|
||||
20. Navigate to `FAT IMAGE`
|
||||
21. Use the (X) button to delete everything inside of `FAT IMAGE`
|
||||
22. Press (Y) to paste a copy of **the contents of** the `savedata` folder to `FAT IMAGE`
|
||||
23. Select "Copy path(s)"
|
||||
24. Press (A) to unlock image writing, then input the key combo given
|
||||
25. Press (Start) to reboot
|
||||
26. Launch your DSiWare game on **the source 3DS**
|
||||
27. Tap the screen or press any button to start the game and test if the save is functional
|
||||
+ If you are using the EUR files (**Legends of Exidia**), after pressing (A) or (Start) at the two title screens, select the first save slot and press continue
|
||||
+ If your game has an error about `boot.nds` or a white screen, **then the exploit has been successful**
|
||||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
|
|
@ -159,16 +159,16 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
|
||||
1. Copy and merge the `3ds` folder from the ctr-httpwn `.zip` to **the target 3DS**'s SD card
|
||||
2. Reinsert your SD card into **the target 3DS**
|
||||
2. Launch the homebrew launcher on the device using [Homebrew Launcher (No Browser)](homebrew-launcher-(no-browser))
|
||||
3. Launch the homebrew launcher on the device using [Homebrew Launcher (No Browser)](homebrew-launcher-(no-browser))
|
||||
+ **New 3DSs on versions 10.7.0 and 11.0.0 can use [Homebrew Launcher (Browser)](homebrew-launcher-(browser)) instead**
|
||||
+ **Ensure menuhax is not installed, or you won't be able to return to Home Menu from the homebrew launcher**
|
||||
3. Launch ctr-httpwn on **the target 3DS**
|
||||
4. Press (A) to continue
|
||||
5. Press (Start) to exit ctr-httpwn
|
||||
6. Press (Start) to open the homebrew launcher exit menu
|
||||
7. Press (X) to Return to Home Menu (no reboot)
|
||||
4. Launch ctr-httpwn on **the target 3DS**
|
||||
5. Press (A) to continue
|
||||
6. Press (Start) to exit ctr-httpwn
|
||||
7. Press (Start) to open the homebrew launcher exit menu
|
||||
8. Press (X) to Return to Home Menu (no reboot)
|
||||
+ You may get an "Error has occurred" message with the option to continue. This is fine, just hit (A)
|
||||
8. Continue to the next section **without rebooting**
|
||||
9. Continue to the next section **without rebooting**
|
||||
+ **the target 3DS** has been temporarily patched to allow network functions (such as System Transfer) without running the latest system version
|
||||
+ Keep in mind that exiting the System Settings will reboot the system
|
||||
+ If the system is rebooted, you'll have to re-run ctr-httpwn before System Transfer will work
|
||||
|
|
@ -177,9 +177,9 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
|
||||
1. **Backup every file on both 3DS's SD cards to two separate folders on your computer (keep track of which is which)!**
|
||||
2. Reinsert each SD card back into their corresponding 3DS
|
||||
4. If **the target 3DS** has a Nintendo Network ID on it, you must format the device using System Settings:
|
||||
3. If **the target 3DS** has a Nintendo Network ID on it, you must format the device using System Settings:
|
||||
+ Go to the last page of "Other Settings" and select "Format System Memory", then follow all instructions
|
||||
5. Read the following:
|
||||
4. Read the following:
|
||||
+ Your CFW 3DS = the source 3DS = "Source System"
|
||||
+ Your Stock 3DS = the target 3DS = "Target System"
|
||||
+ **Move DSiWare titles if prompted!**
|
||||
|
|
@ -189,7 +189,7 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
+ **Do NOT** choose the "Low-Capacity microSD Card Transfer" or minimal option (option 2), it will only transfer tickets and likely will not transfer the DSiWare save.
|
||||
+ Fast Method: If you have the ability to move the data from the SD card (source) to the microSD card (target), when prompted use the "PC-Based Transfer" option (option 3).
|
||||
+ Slowest Method: If you don't have the ability to move the data on a PC use the **full** "Wireless Transfer" option (option 1).
|
||||
6. Go to [this link](http://en-americas-support.nintendo.com/app/answers/detail/a_id/227/) and follow Nintendo's official instructions for System Transferring from one system to another while keeping in mind what you just read
|
||||
5. Go to [this link](http://en-americas-support.nintendo.com/app/answers/detail/a_id/227/) and follow Nintendo's official instructions for System Transferring from one system to another while keeping in mind what you just read
|
||||
|
||||
##### Section VI - Restoring the source 3DS
|
||||
|
||||
|
|
@ -204,17 +204,17 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
##### Section VII - Backing up the target 3DS's NFIRM
|
||||
|
||||
1. Copy the dgTool `boot.nds` to the root of **the target 3DS**'s SD card
|
||||
1. Create a folder named `dgTool` on the root of **the target 3DS**'s SD card if it does not already exist
|
||||
2. Create a folder named `dgTool` on the root of **the target 3DS**'s SD card if it does not already exist
|
||||
3. Copy the contents of the NFIRM `.zip` to the `dgTool` folder on the root of **the target 3DS**'s SD card
|
||||
3. Launch your DSiWare game on **the target 3DS**
|
||||
4. Launch dgTool by starting your DSiWare game
|
||||
4. Launch your DSiWare game on **the target 3DS**
|
||||
5. Launch dgTool by starting your DSiWare game
|
||||
+ If the game does not launch dgTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
5. Select "Dump f0f1" to backup **the target 3DS**'s NFIRM
|
||||
6. Select "Dump f0f1" to backup **the target 3DS**'s NFIRM
|
||||
+ This will take a while
|
||||
6. Make note of the NFIRM backup's location
|
||||
7. Exit dgTool
|
||||
7. Make note of the NFIRM backup's location
|
||||
8. Exit dgTool
|
||||
+ You may have to force power off by holding the power button
|
||||
8. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location
|
||||
9. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location
|
||||
+ Make backups in multiple locations
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
|
||||
|
|
@ -224,7 +224,7 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
**Never downgrade with dgTool on a device that already has arm9loaderhax installed or you will BRICK!**
|
||||
|
||||
1. Launch your DSiWare game on **the target 3DS**
|
||||
4. Launch dgTool by starting your DSiWare game
|
||||
2. Launch dgTool by starting your DSiWare game
|
||||
3. Select "Downgrade FIRM to 10.4" and confirm to flash the 10.4.0 NFIRM bin to **the target 3DS**
|
||||
4. Exit dgTool
|
||||
+ You may have to force power off by holding the power button
|
||||
|
|
|
|||
|
|
@ -47,14 +47,14 @@ Your DSiWare's save will be backed up before getting replaced by the hacked save
|
|||
|
||||
1. Copy _the contents of_ the `starter.zip` to the root of your SD card, replace existing files
|
||||
+ This will ensure that the Homebrew Launcher is up to date; older versions will freeze when your try to launch 3ds_dsiwarehax_installer
|
||||
4. Copy and merge the `3ds` folder from the 3ds_dsiwarehax_installer `.zip` to the root of your SD card
|
||||
4. Copy the `4B51394A` folder from `4B51394A.zip` to the `/3ds/3ds_dsiwarehax_installer/dsiware/` folder on your SD card.
|
||||
5. Copy and merge the `3ds` folder from the 3DSident `.zip` to your SD card
|
||||
2. Copy and merge the `3ds` folder from the 3ds_dsiwarehax_installer `.zip` to the root of your SD card
|
||||
3. Copy the `4B51394A` folder from `4B51394A.zip` to the `/3ds/3ds_dsiwarehax_installer/dsiware/` folder on your SD card.
|
||||
4. Copy and merge the `3ds` folder from the 3DSident `.zip` to your SD card
|
||||
5. Copy `waithax.3dsx` to the `/3ds/` folder on your SD card
|
||||
6. Copy the dgTool `boot.nds` to the root of your SD card
|
||||
1. Create a folder named `dgTool` on the root of your SD card if it does not already exist
|
||||
3. Copy the contents of the NFIRM `.zip` to the `dgTool` folder on the root of your SD card
|
||||
4. Reinsert your SD card into your 3DS
|
||||
7. Create a folder named `dgTool` on the root of your SD card if it does not already exist
|
||||
8. Copy the contents of the NFIRM `.zip` to the `dgTool` folder on the root of your SD card
|
||||
9. Reinsert your SD card into your 3DS
|
||||
|
||||
##### Section II - Backup DSiWare
|
||||
|
||||
|
|
@ -65,8 +65,8 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
{: .notice--info}
|
||||
|
||||
1. Go to System Settings, then "Data Management", then "DSiWare"
|
||||
3. Copy the DSiWare game you intend to use to the SD Card
|
||||
4. Exit System Settings
|
||||
2. Copy the DSiWare game you intend to use to the SD Card
|
||||
3. Exit System Settings
|
||||
|
||||
##### Section III - waithax
|
||||
|
||||
|
|
@ -85,19 +85,19 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
|
||||
##### Section IV - Backing up NFIRM
|
||||
|
||||
3. Launch your DSiWare game
|
||||
4. Launch dgTool using your DSiWare game
|
||||
1. Launch your DSiWare game
|
||||
2. Launch dgTool using your DSiWare game
|
||||
+ **Fieldrunners**: Touch the 'Scores' button at the main menu
|
||||
+ **Legends of Exidia**: After pressing (A) or (Start) at the two title screens, select the first save slot and press continue
|
||||
+ **Guitar Rock Tour**: Scroll down and go to High-Scores -> Drums -> Easy
|
||||
+ **The Legend of Zelda: Four Swords (Anniversary Edition)**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, restart from the beginning
|
||||
5. Select "Dump f0f1" to backup your NFIRM
|
||||
3. Select "Dump f0f1" to backup your NFIRM
|
||||
+ This will take a while
|
||||
6. Make note of the NFIRM backup's location
|
||||
7. Exit dgTool
|
||||
4. Make note of the NFIRM backup's location
|
||||
5. Exit dgTool
|
||||
+ You may have to force power off by holding the power button
|
||||
8. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location
|
||||
6. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location
|
||||
+ Make backups in multiple locations
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
|
||||
|
|
@ -107,7 +107,7 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
{: .notice--danger}
|
||||
|
||||
1. Launch your DSiWare game on
|
||||
4. Launch dgTool using your DSiWare game
|
||||
2. Launch dgTool using your DSiWare game
|
||||
+ **Fieldrunners**: Touch the 'Scores' button at the main menu
|
||||
+ **Legends of Exidia**: After pressing (A) or (Start) at the two title screens, select the first save slot and press continue
|
||||
+ **Guitar Rock Tour**: Scroll down and go to High-Scores -> Drums -> Easy
|
||||
|
|
@ -119,10 +119,10 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
|
||||
##### Section VI - Exploit verification
|
||||
|
||||
2. Reinsert your SD card into your 3DS
|
||||
3. Launch the homebrew launcher on using your entrypoint
|
||||
4. Launch 3DSident
|
||||
5. Verify that the following:
|
||||
1. Reinsert your SD card into your 3DS
|
||||
2. Launch the homebrew launcher on using your entrypoint
|
||||
3. Launch 3DSident
|
||||
4. Verify that the following:
|
||||
+ **Kernel version**: 2.50-11
|
||||
+ **FIRM version**: 2.50-11
|
||||
+ If either of these do not display the versions above, make sure you used the correct NFIRM zip and try flashing NFIRM again
|
||||
|
|
|
|||
|
|
@ -120,12 +120,12 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
|
||||
##### Section III - Installing the save
|
||||
|
||||
2. Launch FBI on **the source 3DS**
|
||||
3. Navigate to `SD`
|
||||
4. Press (A) on `public.sav` and copy it
|
||||
5. Press (B) to get back to the main menu
|
||||
6. Navigate to `TWL NAND` -> `title` -> `00030004`
|
||||
7. Navigate to the folder for your game and region:
|
||||
1. Launch FBI on **the source 3DS**
|
||||
2. Navigate to `SD`
|
||||
3. Press (A) on `public.sav` and copy it
|
||||
4. Press (B) to get back to the main menu
|
||||
5. Navigate to `TWL NAND` -> `title` -> `00030004`
|
||||
6. Navigate to the folder for your game and region:
|
||||
+ **Fieldrunners USA Region**: `4b464445`
|
||||
+ **Fieldrunners EUR Region**: `4b464456`
|
||||
+ **Legends of Exidia USA Region**: `4b4c4545`
|
||||
|
|
@ -135,13 +135,13 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
+ **Guitar Rock Tour USA Region**: `4b475245`
|
||||
+ **The Legend of Zelda: Four Swords (Anniversary Edition) EUR Region**: `4b513956`
|
||||
+ **The Legend of Zelda: Four Swords (Anniversary Edition) USA Region**: `4b513945`
|
||||
9. Navigate to the `data` folder
|
||||
7. Navigate to the `data` folder
|
||||
8. Press (A) on the existing `public.sav` and delete it
|
||||
9. Press (A) on the current directory and paste `public.sav`
|
||||
10. Press (B) to get back to the main menu
|
||||
11. Press (Start) to exit
|
||||
3. Launch your DSiWare game on **the source 3DS**
|
||||
4. Test if the save is functional
|
||||
12. Launch your DSiWare game on **the source 3DS**
|
||||
13. Test if the save is functional
|
||||
+ **Fieldrunners**: Touch the 'Scores' button at the main menu
|
||||
+ **Legends of Exidia**: After pressing (A) or (Start) at the two title screens, select the first save slot and press continue
|
||||
+ **Guitar Rock Tour**: Scroll down and go to High-Scores -> Drums -> Easy
|
||||
|
|
@ -158,16 +158,16 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
|
||||
1. Copy and merge the `3ds` folder from the ctr-httpwn `.zip` to **the target 3DS**'s SD card
|
||||
2. Reinsert your SD card into **the target 3DS**
|
||||
2. Launch the homebrew launcher on the device using [Homebrew Launcher (No Browser)](homebrew-launcher-(no-browser))
|
||||
3. Launch the homebrew launcher on the device using [Homebrew Launcher (No Browser)](homebrew-launcher-(no-browser))
|
||||
+ **New 3DSs on versions 10.7.0 and 11.0.0 can use [Homebrew Launcher (Browser)](homebrew-launcher-(browser)) instead**
|
||||
+ **Ensure menuhax is not installed, or you won't be able to return to Home Menu from the homebrew launcher**
|
||||
3. Launch ctr-httpwn on **the target 3DS**
|
||||
4. Press (A) to continue
|
||||
5. Press (Start) to exit ctr-httpwn
|
||||
6. Press (Start) to open the homebrew launcher exit menu
|
||||
7. Press (X) to Return to Home Menu (no reboot)
|
||||
4. Launch ctr-httpwn on **the target 3DS**
|
||||
5. Press (A) to continue
|
||||
6. Press (Start) to exit ctr-httpwn
|
||||
7. Press (Start) to open the homebrew launcher exit menu
|
||||
8. Press (X) to Return to Home Menu (no reboot)
|
||||
+ You may get an "Error has occurred" message with the option to continue. This is fine, just hit (A)
|
||||
8. Continue to the next section **without rebooting**
|
||||
9. Continue to the next section **without rebooting**
|
||||
+ **the target 3DS** has been temporarily patched to allow network functions (such as System Transfer) without running the latest system version
|
||||
+ Keep in mind that exiting the System Settings will reboot the system
|
||||
+ If the system is rebooted, you'll have to re-run ctr-httpwn before System Transfer will work
|
||||
|
|
@ -176,9 +176,9 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
|
||||
1. **Backup every file on both 3DS's SD cards to two separate folders on your computer (keep track of which is which)!**
|
||||
2. Reinsert each SD card back into their corresponding 3DS
|
||||
4. If **the target 3DS** has a Nintendo Network ID on it, you must format the device using System Settings:
|
||||
3. If **the target 3DS** has a Nintendo Network ID on it, you must format the device using System Settings:
|
||||
+ Go to the last page of "Other Settings" and select "Format System Memory", then follow all instructions
|
||||
5. Read the following:
|
||||
4. Read the following:
|
||||
+ Your CFW 3DS = the source 3DS = "Source System"
|
||||
+ Your Stock 3DS = the target 3DS = "Target System"
|
||||
+ **Move DSiWare titles if prompted!**
|
||||
|
|
@ -188,7 +188,7 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
+ **Do NOT** choose the "Low-Capacity microSD Card Transfer" or minimal option (option 2), it will only transfer tickets and likely will not transfer the DSiWare save.
|
||||
+ Fast Method: If you have the ability to move the data from the SD card (source) to the microSD card (target), when prompted use the "PC-Based Transfer" option (option 3).
|
||||
+ Slowest Method: If you don't have the ability to move the data on a PC use the **full** "Wireless Transfer" option (option 1).
|
||||
6. Go to [this link](http://en-americas-support.nintendo.com/app/answers/detail/a_id/227/) and follow Nintendo's official instructions for System Transferring from one system to another while keeping in mind what you just read
|
||||
5. Go to [this link](http://en-americas-support.nintendo.com/app/answers/detail/a_id/227/) and follow Nintendo's official instructions for System Transferring from one system to another while keeping in mind what you just read
|
||||
|
||||
##### Section VI - Restoring the source 3DS
|
||||
|
||||
|
|
@ -202,21 +202,21 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
##### Section VII - Backing up the target 3DS's NFIRM
|
||||
|
||||
1. Copy the dgTool `boot.nds` to the root of **the target 3DS**'s SD card
|
||||
1. Create a folder named `dgTool` on the root of **the target 3DS**'s SD card if it does not already exist
|
||||
2. Create a folder named `dgTool` on the root of **the target 3DS**'s SD card if it does not already exist
|
||||
3. Copy the contents of the NFIRM `.zip` to the `dgTool` folder on the root of **the target 3DS**'s SD card
|
||||
3. Launch your DSiWare game on **the target 3DS**
|
||||
4. Launch dgTool using your DSiWare game
|
||||
4. Launch your DSiWare game on **the target 3DS**
|
||||
5. Launch dgTool using your DSiWare game
|
||||
+ **Fieldrunners**: Touch the 'Scores' button at the main menu
|
||||
+ **Legends of Exidia**: After pressing (A) or (Start) at the two title screens, select the first save slot and press continue
|
||||
+ **Guitar Rock Tour**: Scroll down and go to High-Scores -> Drums -> Easy
|
||||
+ **The Legend of Zelda: Four Swords (Anniversary Edition)**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
5. Select "Dump f0f1" to backup **the target 3DS**'s NFIRM
|
||||
6. Select "Dump f0f1" to backup **the target 3DS**'s NFIRM
|
||||
+ This will take a while
|
||||
6. Make note of the NFIRM backup's location
|
||||
7. Exit dgTool
|
||||
7. Make note of the NFIRM backup's location
|
||||
8. Exit dgTool
|
||||
+ You may have to force power off by holding the power button
|
||||
8. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location
|
||||
9. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location
|
||||
+ Make backups in multiple locations
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
|
||||
|
|
@ -225,7 +225,7 @@ This backup can only be used on this NAND. If you format your 3DS or restore ano
|
|||
**Never downgrade with dgTool on a device that already has arm9loaderhax installed or you will BRICK!**
|
||||
|
||||
1. Launch your DSiWare game on **the target 3DS**
|
||||
4. Launch dgTool using your DSiWare game
|
||||
2. Launch dgTool using your DSiWare game
|
||||
+ **Fieldrunners**: Touch the 'Scores' button at the main menu
|
||||
+ **Legends of Exidia**: After pressing (A) or (Start) at the two title screens, select the first save slot and press continue
|
||||
+ **Guitar Rock Tour**: Scroll down and go to High-Scores -> Drums -> Easy
|
||||
|
|
|
|||
|
|
@ -13,17 +13,17 @@ ref: decrypt9-(homebrew-launcher)
|
|||
|
||||
#### Instructions
|
||||
|
||||
2. Create a folder named `files9` on the root of your SD card if it does not already exist
|
||||
3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card
|
||||
4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card
|
||||
3. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin`
|
||||
3. Reinsert your SD card into your 3DS
|
||||
4. Enter the homebrew launcher
|
||||
4. Launch fasthax
|
||||
4. Once it has completed, press (Start) to exit back to the homebrew launcher
|
||||
1. Create a folder named `files9` on the root of your SD card if it does not already exist
|
||||
2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card
|
||||
3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card
|
||||
4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin`
|
||||
5. Reinsert your SD card into your 3DS
|
||||
6. Enter the homebrew launcher
|
||||
7. Launch fasthax
|
||||
8. Once it has completed, press (Start) to exit back to the homebrew launcher
|
||||
+ This may take several tries
|
||||
5. Launch safehax
|
||||
6. If the exploit was successful, you will have booted into Decrypt9
|
||||
9. Launch safehax
|
||||
10. If the exploit was successful, you will have booted into Decrypt9
|
||||
|
||||
Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)
|
||||
{: .notice--primary}
|
||||
|
|
|
|||
|
|
@ -22,10 +22,10 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw (
|
|||
|
||||
1. Unzip the F3X `.zip` file
|
||||
2. Insert your SD card into your computer
|
||||
2. Run the F3X app
|
||||
3. Run the F3X app
|
||||
4. Select your SD card
|
||||
5. Press "Start Test"
|
||||
5. Wait until the process is complete.
|
||||
6. Wait until the process is complete.
|
||||
|
||||
If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card
|
||||
{: .notice--success}
|
||||
|
|
|
|||
|
|
@ -26,8 +26,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
|
|||
5. Launch Nintendo 3DS Sound
|
||||
6. Go through all of the bird tips, then close the app normally and reopen it
|
||||
+ Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
|
||||
6. Play the SoundHax `.m4a`
|
||||
7. Your console should load the homebrew menu
|
||||
7. Play the SoundHax `.m4a`
|
||||
8. Your console should load the homebrew menu
|
||||
|
||||
Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher))
|
||||
{: .notice--primary}
|
||||
|
|
|
|||
|
|
@ -67,14 +67,14 @@ During this process, we also setup programs such as the following:
|
|||
|
||||
1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system**
|
||||
2. Create a folder named `cias` on the root of your SD card if it does not already exist
|
||||
4. **Delete the `a9lh` folder from the root of your SD card if it exists**
|
||||
3. **Delete the `a9lh` folder from the root of your SD card if it exists**
|
||||
+ **If you accidentally install arm9loaderhax using another device's `OTP.bin`, you will BRICK!**
|
||||
3. Delete the `3ds` folder from the root of your SD card if it exists
|
||||
4. **Copy _the contents of_ the `starter.zip` to the root of your SD card**
|
||||
4. Delete the `3ds` folder from the root of your SD card if it exists
|
||||
5. **Copy _the contents of_ the `starter.zip` to the root of your SD card**
|
||||
+ This will include a brand new `3ds` folder to replace the one you just deleted
|
||||
5. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card
|
||||
6. **Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card**
|
||||
7. **Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card**
|
||||
6. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card
|
||||
7. **Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card**
|
||||
8. **Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card**
|
||||
9. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
|
||||
10. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card
|
||||
11. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
|
||||
|
|
@ -83,9 +83,9 @@ During this process, we also setup programs such as the following:
|
|||
14. Create a folder named `payloads` in the `luma` folder on your SD card
|
||||
15. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin`
|
||||
16. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` to `up_GodMode9.bin`
|
||||
16. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
|
||||
17. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card
|
||||
18. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card
|
||||
17. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
|
||||
18. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card
|
||||
19. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card
|
||||
|
||||
##### Section II - Installing arm9loaderhax
|
||||
|
||||
|
|
@ -146,42 +146,42 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot
|
||||
2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)**
|
||||
3. Press (B), then select the "Health&Safety Inject" option
|
||||
8. Select the FBI injectable `.app` for your region
|
||||
4. Press (A) and confirm to inject
|
||||
9. Press (Start) to reboot
|
||||
10. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi)
|
||||
4. Select the FBI injectable `.app` for your region
|
||||
5. Press (A) and confirm to inject
|
||||
6. Press (Start) to reboot
|
||||
7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi)
|
||||
|
||||
##### Section VI - Finalizing setup
|
||||
|
||||
2. Open Health and Safety (which is now FBI)
|
||||
3. Select "SD"
|
||||
4. Select "cias"
|
||||
5. Navigate to `FBI.cia` and press (A) to install
|
||||
6. Navigate to `hblauncher_loader.cia` and press (A) to install
|
||||
7. Navigate to `lumaupdater.cia` and press (A) to install
|
||||
8. Return to the SD directory with (B)
|
||||
1. Open Health and Safety (which is now FBI)
|
||||
2. Select "SD"
|
||||
3. Select "cias"
|
||||
4. Navigate to `FBI.cia` and press (A) to install
|
||||
5. Navigate to `hblauncher_loader.cia` and press (A) to install
|
||||
6. Navigate to `lumaupdater.cia` and press (A) to install
|
||||
7. Return to the SD directory with (B)
|
||||
8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option
|
||||
9. Return to the FBI main menu with (B)
|
||||
10. Select "CTR NAND"
|
||||
11. Select "\<current directory>"
|
||||
12. Select the "Paste" option, then press (A) to confirm
|
||||
8. Exit with the home button
|
||||
9. Launch the Homebrew Launcher from the home menu
|
||||
10. Select "DSP Dump"
|
||||
11. Press (Start) when prompted to exit
|
||||
12. Reboot while holding Start to launch Hourglass9
|
||||
13. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
|
||||
14. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
|
||||
15. Press (Select) on the main menu to eject your SD card
|
||||
15. Press (Start) to reboot with the SD card removed
|
||||
13. Exit with the home button
|
||||
14. Launch the Homebrew Launcher from the home menu
|
||||
15. Select "DSP Dump"
|
||||
16. Press (Start) when prompted to exit
|
||||
17. Reboot while holding Start to launch Hourglass9
|
||||
18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
|
||||
19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
|
||||
20. Press (Select) on the main menu to eject your SD card
|
||||
21. Press (Start) to reboot with the SD card removed
|
||||
+ Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based luma installation
|
||||
16. Use the (A) button and the D-Pad to turn on the following:
|
||||
22. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
3. If you are using a **New 3DS**, you should *also* enable the following:
|
||||
23. If you are using a **New 3DS**, you should *also* enable the following:
|
||||
+ **"New 3DS CPU" to "Clock+L2(x)"**
|
||||
+ This will increase the framerate of many games, but may cause instability in others
|
||||
+ If some games do not work properly, disable this option and try again
|
||||
14. Reinsert your SD card, then press Start to save and reboot!
|
||||
24. Reinsert your SD card, then press Start to save and reboot!
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -43,11 +43,11 @@ You will LOSE your GBA VC and DSiWare saves!
|
|||
17. Select "Auto"
|
||||
18. Enter the prompted button combination to confirm
|
||||
19. Hold (R) and press (B) at the same time to eject your SD card
|
||||
16. Put your SD card in your computer, then copy all your files back into it
|
||||
20. Put your SD card in your computer, then copy all your files back into it
|
||||
+ Ensure you replace the `arm9loaderhax.bin` file on the SD card with the one from your backup
|
||||
18. Reinsert your SD card into your 3DS
|
||||
19. Press (A) to remount your SD card
|
||||
20. Press (Start) to reboot!
|
||||
19. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down)
|
||||
21. Reinsert your SD card into your 3DS
|
||||
22. Press (A) to remount your SD card
|
||||
23. Press (Start) to reboot!
|
||||
24. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down)
|
||||
|
||||
Return to [Installing arm9loaderhax](installing-arm9loaderhax).
|
||||
|
|
|
|||
|
|
@ -35,13 +35,13 @@ ref: ntr-and-cubic-ninja
|
|||
7. In the `C:\wamp\www\updates` directory, drag `CdnCiaUnpack.js` onto `node.exe` to create `GetSystemUpdate.partial.xml`
|
||||
8. Move `node.exe` and `CdnCiaUnpack.js` back to `C:\wamp\www\`
|
||||
9. Copy `GetSystemUpdate.partial.xml` to `C:\wamp\www\` (so that a copy of it exists in both `C:\wamp\www\updates` and `C:\wamp\www\`)
|
||||
9. Click the WAMP icon in your system tray, then click "Put Online"
|
||||
10. Use the command "ipconfig" in CMD to get your computer's IPv4 Address, you will need it soon
|
||||
11. Copy `ntr.bin` to the root of your SD card
|
||||
12. Create a folder named `files9` on the root of your SD card if it does not already exist
|
||||
1. Copy _the contents of_ the `starter.zip` to the root of your SD card
|
||||
2. Copy the `Decrypt9WIP` folder from the Decrypt9WIP `.zip` to `/3ds/` on your SD card
|
||||
3. Put the SD card back into your 3DS
|
||||
10. Click the WAMP icon in your system tray, then click "Put Online"
|
||||
11. Use the command "ipconfig" in CMD to get your computer's IPv4 Address, you will need it soon
|
||||
12. Copy `ntr.bin` to the root of your SD card
|
||||
13. Create a folder named `files9` on the root of your SD card if it does not already exist
|
||||
14. Copy _the contents of_ the `starter.zip` to the root of your SD card
|
||||
15. Copy the `Decrypt9WIP` folder from the Decrypt9WIP `.zip` to `/3ds/` on your SD card
|
||||
16. Put the SD card back into your 3DS
|
||||
|
||||
##### Section II - Updating
|
||||
|
||||
|
|
|
|||
|
|
@ -52,27 +52,27 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot
|
|||
|
||||
##### Section II - Backup tickets and config save
|
||||
|
||||
5. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9
|
||||
6. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)"
|
||||
7. Press (Select) to eject your SD card, then put it in your computer
|
||||
8. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-"
|
||||
9. Leave all the `.tik` files that do start with "00-" in the folder
|
||||
10. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu
|
||||
11. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin"
|
||||
1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9
|
||||
2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)"
|
||||
3. Press (Select) to eject your SD card, then put it in your computer
|
||||
4. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-"
|
||||
5. Leave all the `.tik` files that do start with "00-" in the folder
|
||||
6. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu
|
||||
7. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin"
|
||||
|
||||
##### Section III - ctrtransfer
|
||||
|
||||
6. Go to "SysNAND Options", then "CTRNAND Transfer", then "Auto CTRNAND Transfer"
|
||||
7. Select the 9.2.0 ctrtransfer image when prompted by pressing (A)
|
||||
8. If you do not already have a NAND backup, **backup SysNAND to `NANDmin.bin` when prompted by pressing (A)**
|
||||
9. Allow the transfer process to proceed automatically, this may take some time
|
||||
10. Once the transfer is complete, press Select to eject your SD card
|
||||
11. Put your SD card in your computer, then copy `NANDmin.bin` and `NANDmin.bin.sha` from the `/files9/` folder on your SD card to a safe location
|
||||
1. Go to "SysNAND Options", then "CTRNAND Transfer", then "Auto CTRNAND Transfer"
|
||||
2. Select the 9.2.0 ctrtransfer image when prompted by pressing (A)
|
||||
3. If you do not already have a NAND backup, **backup SysNAND to `NANDmin.bin` when prompted by pressing (A)**
|
||||
4. Allow the transfer process to proceed automatically, this may take some time
|
||||
5. Once the transfer is complete, press Select to eject your SD card
|
||||
6. Put your SD card in your computer, then copy `NANDmin.bin` and `NANDmin.bin.sha` from the `/files9/` folder on your SD card to a safe location
|
||||
+ Make backups in multiple locations
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ **Your backup should match one of the sizes on [this](nand-size) page; if it does not, you should delete it and make a new one!**
|
||||
12. Delete the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the `/files9/` folder on your SD card after copying it
|
||||
13. Reinsert your SD card into your 3DS
|
||||
7. Delete the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the `/files9/` folder on your SD card after copying it
|
||||
8. Reinsert your SD card into your 3DS
|
||||
|
||||
##### Section IV - Editing SecureInfo
|
||||
|
||||
|
|
|
|||
|
|
@ -29,20 +29,20 @@ If you are unable to boot your 3DS, please look for the section relevant to you,
|
|||
##### Section I - Prep work
|
||||
|
||||
1. Create a folder named `cias` on the root of your SD card if it does not already exist
|
||||
1. Copy `TWL Version Data - v0.cia` to the `/cias/` folder on your SD card
|
||||
2. Copy `DS Download Play - v1024.cia` to the `/cias/` folder on your SD card
|
||||
3. Copy `DS Internet - v2048.cia` to the `/cias/` folder on your SD card
|
||||
4. Copy `Nintendo DS Cart Whitelist - v11264.cia` to the `/cias/` folder on your SD card
|
||||
5. Copy either `New_3DS TWL_FIRM - v9936.cia` or `Old_3DS TWL_FIRM - v8817.cia` to the `/cias/` folder on your SD card
|
||||
2. Copy `TWL Version Data - v0.cia` to the `/cias/` folder on your SD card
|
||||
3. Copy `DS Download Play - v1024.cia` to the `/cias/` folder on your SD card
|
||||
4. Copy `DS Internet - v2048.cia` to the `/cias/` folder on your SD card
|
||||
5. Copy `Nintendo DS Cart Whitelist - v11264.cia` to the `/cias/` folder on your SD card
|
||||
6. Copy either `New_3DS TWL_FIRM - v9936.cia` or `Old_3DS TWL_FIRM - v8817.cia` to the `/cias/` folder on your SD card
|
||||
|
||||
##### Section II - Installing titles
|
||||
|
||||
1. Open FBI
|
||||
3. Select "SD"
|
||||
4. Select "cias"
|
||||
8. Select "\<current directory>"
|
||||
9. Select "Install and delete all CIAs"
|
||||
8. Exit with the home button
|
||||
2. Select "SD"
|
||||
3. Select "cias"
|
||||
4. Select "\<current directory>"
|
||||
5. Select "Install and delete all CIAs"
|
||||
6. Exit with the home button
|
||||
|
||||
## <a name="rm_nnid" />Removing an NNID without formatting the device
|
||||
|
||||
|
|
@ -53,14 +53,14 @@ If you are unable to boot your 3DS, please look for the section relevant to you,
|
|||
#### Instructions
|
||||
|
||||
1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin`
|
||||
6. Boot holding (Up) to reboot into arm9loaderhax GodMode9
|
||||
14. Navigate to `SYSNAND CTRNAND` -> `data` -> (32 Character ID) -> `sysdata` -> `00010038`
|
||||
15. Hold down the (R) trigger, then press X on `00000000` to rename this file
|
||||
16. Press Up once to change the name to `10000000`
|
||||
17. Press (A) to save changes
|
||||
18. Press (A) to unlock SysNAND writing, then input the key combo given
|
||||
18. Navigate back to the Main Menu
|
||||
16. Press Start to reboot
|
||||
2. Boot holding (Up) to reboot into arm9loaderhax GodMode9
|
||||
3. Navigate to `SYSNAND CTRNAND` -> `data` -> (32 Character ID) -> `sysdata` -> `00010038`
|
||||
4. Hold down the (R) trigger, then press X on `00000000` to rename this file
|
||||
5. Press Up once to change the name to `10000000`
|
||||
6. Press (A) to save changes
|
||||
7. Press (A) to unlock SysNAND writing, then input the key combo given
|
||||
8. Navigate back to the Main Menu
|
||||
9. Press Start to reboot
|
||||
|
||||
## <a name="gw_fbi" />Cannot inject H&S on Gateway downgraded device
|
||||
This is caused by Gateway implementing a very shoddy downgrade method, which leaves two versions of each app on the system. One of them is unused, but it confuses Decrypt9, causing it to inject into the wrong one.
|
||||
|
|
@ -73,50 +73,50 @@ This is caused by Gateway implementing a very shoddy downgrade method, which lea
|
|||
|
||||
1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin`
|
||||
2. Reinsert your SD card into your 3DS
|
||||
5. Open GodMode9 from arm9loaderhax by holding (Up) during boot
|
||||
2. Navigate to `SYSNAND CTRNAND` -> `title` -> `00040010`
|
||||
7. Navigate to the folder for your device and region:
|
||||
3. Open GodMode9 from arm9loaderhax by holding (Up) during boot
|
||||
4. Navigate to `SYSNAND CTRNAND` -> `title` -> `00040010`
|
||||
5. Navigate to the folder for your device and region:
|
||||
+ **Old 3DS EUR**: `00022300` -> `content`
|
||||
+ **Old 3DS JPN**: `00020300` -> `content`
|
||||
+ **Old 3DS USA**: `00021300` -> `content`
|
||||
+ **New 3DS EUR**: `20022300` -> `content`
|
||||
+ **New 3DS JPN**: `20020300` -> `content`
|
||||
+ **New 3DS USA**: `20021300` -> `content`
|
||||
8. Notice that there are two sets of app and tmd files, one set with uppercase extensions (`.TMD` and `.APP`), and one set with lowercase extensions (`.tmd` and `.app`)
|
||||
11. While holding the (R) trigger, press (Y) to create a new directory
|
||||
10. Press (A) to confirm the name `newdir` (it doesn't matter what it's called)
|
||||
6. Press (A) to unlock SysNAND writing, then input the key combo given
|
||||
9. Press the (L) trigger on each of the uppercase extension files (`.TMD` and `.APP`) to mark them
|
||||
10. Press (Y) to copy the files
|
||||
11. Navigate to `newdir`
|
||||
12. Press (Y) to paste the files
|
||||
13. Select "Move path(s)"
|
||||
14. The uppercase extension files will have been moved to the `newdir` directory
|
||||
15. Press (Start) to reboot
|
||||
16. Return to [Installing arm9loaderhax](installing-arm9loaderhax) and retry the FBI injection
|
||||
17. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Installing arm9loaderhax](installing-arm9loaderhax) and retry the FBI injection
|
||||
6. Notice that there are two sets of app and tmd files, one set with uppercase extensions (`.TMD` and `.APP`), and one set with lowercase extensions (`.tmd` and `.app`)
|
||||
7. While holding the (R) trigger, press (Y) to create a new directory
|
||||
8. Press (A) to confirm the name `newdir` (it doesn't matter what it's called)
|
||||
9. Press (A) to unlock SysNAND writing, then input the key combo given
|
||||
10. Press the (L) trigger on each of the uppercase extension files (`.TMD` and `.APP`) to mark them
|
||||
11. Press (Y) to copy the files
|
||||
12. Navigate to `newdir`
|
||||
13. Press (Y) to paste the files
|
||||
14. Select "Move path(s)"
|
||||
15. The uppercase extension files will have been moved to the `newdir` directory
|
||||
16. Press (Start) to reboot
|
||||
17. Return to [Installing arm9loaderhax](installing-arm9loaderhax) and retry the FBI injection
|
||||
18. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Installing arm9loaderhax](installing-arm9loaderhax) and retry the FBI injection
|
||||
|
||||
## <a name="ts_browser" />A browser based exploit is not working
|
||||
Browser based exploits (such as browserhax or 2xrsa) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps
|
||||
|
||||
1. Open the browser, then open the browser settings
|
||||
1. Scroll to the bottom and Initialize Savedata (it also may be called Clear All Save Data)
|
||||
2. Try the exploit again
|
||||
2. Scroll to the bottom and Initialize Savedata (it also may be called Clear All Save Data)
|
||||
3. Try the exploit again
|
||||
|
||||
## <a name="ts_safe_a9lh" />System boots directly SafeA9LHInstaller
|
||||
You copied the wrong `arm9loaderhax.bin` file to your SD card (you were only supposed to copy the `3ds` folder and `SafeA9LHInstaller.dat` file from the SafeA9LHInstaller zip)
|
||||
|
||||
1. Use the correct `arm9loaderhax.bin`
|
||||
1. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card
|
||||
2. Reboot holding select and continue
|
||||
2. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card
|
||||
3. Reboot holding select and continue
|
||||
|
||||
## <a name="ts_safe_a9lh_screen" />SafeA9LHInstaller shows a glitched screen
|
||||
This happens occasionally, but the reason is unknown. The buttons will still work, but the screen will be glitched looking
|
||||
|
||||
1. Follow instructions as normal
|
||||
1. Press (Select) and arm9loaderhax will be installed
|
||||
2. The console will reboot
|
||||
+ If the console does not reboot, wait 10 seconds, then power off your 3DS by holding down the power button
|
||||
2. Press (Select) and arm9loaderhax will be installed
|
||||
3. The console will reboot
|
||||
+ If the console does not reboot, wait 10 seconds, then power off your 3DS by holding down the power button
|
||||
|
||||
## <a name="ts_steelhax" />After System Transfering steelhax, it crashes to a black screen on _the target 3DS_
|
||||
|
||||
|
|
@ -132,16 +132,16 @@ This is because you selected the wrong version in the steelhax installer.
|
|||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Downgrade, my hacked DSiWare does not work
|
||||
|
||||
3. Reboot **the source 3DS** while holding Start to launch Hourglass9
|
||||
4. Go to SysNAND Backup/Restore and restore SysNAND from `NANDmin.bin` (the one made before the system transfer)
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
1. Reboot **the source 3DS** while holding Start to launch Hourglass9
|
||||
2. Go to SysNAND Backup/Restore and restore SysNAND from `NANDmin.bin` (the one made before the system transfer)
|
||||
3. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
2. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
3. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
4. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
5. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
6. Return your SD cards to normal, then continue with the DSiWare Downgrade
|
||||
4. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
5. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
6. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
7. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
8. Return your SD cards to normal, then continue with the DSiWare Downgrade
|
||||
|
||||
## <a name="ts_d9_backup" />Decrypt9 or Hourglass9 won't restore / can't find my NAND backup
|
||||
|
||||
|
|
@ -162,16 +162,16 @@ This is because you selected the wrong version in the steelhax installer.
|
|||
+ JPN Region: Delete `00000082`
|
||||
+ USA Region: Delete `0000008f`
|
||||
+ KOR Region: Delete `000000A9`
|
||||
1. Try booting without any cartridges inserted (including flashcarts)
|
||||
2. If you have a hardmod and a NAND backup, flash the backup back to SysNAND.
|
||||
3. Try booting into recovery mode and updating your system.
|
||||
2. Try booting without any cartridges inserted (including flashcarts)
|
||||
3. If you have a hardmod and a NAND backup, flash the backup back to SysNAND.
|
||||
4. Try booting into recovery mode and updating your system.
|
||||
*This probably will not work for an Old 3DS downgraded to 2.1.0*
|
||||
**This will BRICK a New 3DS downgraded to 2.1.0**
|
||||
1. Power off your 3DS by holding down the power button.
|
||||
2. Hold L+R+A+Up.
|
||||
3. Power on the 3DS.
|
||||
4. If you enter safe mode, update your 3DS *only if you have an entrypoint for the latest FW version and it is possible to downgrade from it* and attempt the downgrade again.
|
||||
4. Your 3DS may be bricked. For support, ask for help at [#3dshacks on Rizon IRC](https://www.reddit.com/r/3dshacks/wiki/irc) or [3DS Hacking on Discord](https://discord.gg/MWxPgEp).
|
||||
5. Your 3DS may be bricked. For support, ask for help at [#3dshacks on Rizon IRC](https://www.reddit.com/r/3dshacks/wiki/irc) or [3DS Hacking on Discord](https://discord.gg/MWxPgEp).
|
||||
|
||||
## <a name="ts_sys_a9lh" />Black screen on SysNAND boot after installing arm9loaderhax
|
||||
|
||||
|
|
@ -189,15 +189,15 @@ This is because you selected the wrong version in the steelhax installer.
|
|||
+ USA Region: Delete `0000008f`
|
||||
+ KOR Region: Delete `000000A9`
|
||||
5. Try booting without any cartridges inserted (including flashcarts)
|
||||
8. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
9. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
6. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
7. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your 3DS
|
||||
9. Try following [9.2.0 ctrtransfer](9.2.0-ctrtransfer)
|
||||
10. Ask for help at [#3dshacks on Rizon IRC](https://www.reddit.com/r/3dshacks/wiki/irc) or [3DS Hacking on Discord](https://discord.gg/MWxPgEp).
|
||||
8. Try following [9.2.0 ctrtransfer](9.2.0-ctrtransfer)
|
||||
9. Ask for help at [#3dshacks on Rizon IRC](https://www.reddit.com/r/3dshacks/wiki/irc) or [3DS Hacking on Discord](https://discord.gg/MWxPgEp).
|
||||
|
||||
## <a name="ts_sys_blue" />Blue screen on boot (bootrom error)
|
||||
|
||||
|
|
|
|||
|
|
@ -41,28 +41,28 @@ These steps will also update your various payloads and the AES key database.
|
|||
##### Section I - Prep work
|
||||
|
||||
1. Delete any existing `aeskeydb.bin` from the root of your SD card
|
||||
4. Delete the `a9lh` folder from the root of your SD card if it exists
|
||||
2. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
|
||||
3. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin`
|
||||
2. Delete the `a9lh` folder from the root of your SD card if it exists
|
||||
3. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
|
||||
4. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin`
|
||||
5. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
6. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin`
|
||||
7. Copy the `a9lh` folder from `data_input_v4.zip` to the root of your SD Card
|
||||
7. Copy _the contents of_ the arm9loaderhax `.zip` to `a9lh` folder on your SD card
|
||||
8. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card, overwrite existing files
|
||||
9. Reinsert your SD card into your 3DS
|
||||
8. Copy _the contents of_ the arm9loaderhax `.zip` to `a9lh` folder on your SD card
|
||||
9. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card, overwrite existing files
|
||||
10. Reinsert your SD card into your 3DS
|
||||
|
||||
##### Section II - Payload update
|
||||
|
||||
10. Boot the device while holding D-Pad down
|
||||
11. Press (Select) to update arm9loaderhax
|
||||
12. Power off the device and put your SD card back in your computer
|
||||
13. Delete the `a9lh` folder from the root of your SD card
|
||||
14. Delete `down_safea9lhinstaller.bin` from `/luma/payloads/`
|
||||
1. Boot the device while holding D-Pad down
|
||||
2. Press (Select) to update arm9loaderhax
|
||||
3. Power off the device and put your SD card back in your computer
|
||||
4. Delete the `a9lh` folder from the root of your SD card
|
||||
5. Delete `down_safea9lhinstaller.bin` from `/luma/payloads/`
|
||||
|
||||
##### Section III - Configuring Luma3DS
|
||||
|
||||
15. Reinsert your SD card into your 3DS and boot holding (Select)
|
||||
16. Use the (A) button and the D-Pad to turn on the following:
|
||||
1. Reinsert your SD card into your 3DS and boot holding (Select)
|
||||
2. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Autoboot SysNAND"**
|
||||
+ **"Use SysNAND FIRM if booting with R"**
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
|
|
@ -74,21 +74,21 @@ These steps will also update your various payloads and the AES key database.
|
|||
|
||||
##### Section IV - CTRNAND Luma3DS
|
||||
|
||||
16. Open FBI
|
||||
17. Select "SD"
|
||||
18. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option
|
||||
9. Return to the FBI main menu with (B)
|
||||
10. Select "CTR NAND"
|
||||
11. Select "\<current directory>"
|
||||
12. Select the "Paste" option, then press (A) to confirm
|
||||
1. Open FBI
|
||||
2. Select "SD"
|
||||
3. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option
|
||||
4. Return to the FBI main menu with (B)
|
||||
5. Select "CTR NAND"
|
||||
6. Select "\<current directory>"
|
||||
7. Select the "Paste" option, then press (A) to confirm
|
||||
8. Exit with the home button
|
||||
9. Power off your 3DS and remove the SD card
|
||||
10. Boot with the SD card removed while holding (Select)
|
||||
+ Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based luma installation
|
||||
16. Use the (A) button and the D-Pad to turn on the following:
|
||||
11. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
3. If you are using a **New 3DS**, you should *also* enable the following:
|
||||
12. If you are using a **New 3DS**, you should *also* enable the following:
|
||||
+ **"New 3DS CPU" to "Clock+L2(x)"**
|
||||
+ This will increase the framerate of many games, but may cause instability in others
|
||||
+ If some games do not work properly, disable this option and try again
|
||||
14. Reinsert your SD card, then press Start to save and reboot!
|
||||
13. Reinsert your SD card, then press Start to save and reboot!
|
||||
|
|
|
|||
Loading…
Reference in a new issue