b9s 1.3 update steps
This commit is contained in:
Plailect
parent
0d8e638824
commit
c06dae9c4d
5 changed files with 60 additions and 60 deletions
|
|
@ -32,7 +32,7 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
|
|||
Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below.
|
||||
{: .notice--info}
|
||||
|
||||
Note that, on New 3DS, `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console. If you do not have a New 3DS, you do not need `secret_sector.bin`.
|
||||
Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console. If you do not have a New 3DS, you do not need `secret_sector.bin`.
|
||||
{: .notice--info}
|
||||
|
||||
* <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - **New 3DS Users Only:** [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
|
||||
|
|
@ -43,6 +43,7 @@ Note that, on New 3DS, `secret_sector.bin` is needed to revert the arm9loaderhax
|
|||
* The latest fork of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
|
||||
* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
|
||||
* [`setup_ctrnand_luma3ds.gm9`]({{ base_path }}/gm9_scripts/setup_ctrnand_luma3ds.gm9)
|
||||
* [`cleanup_sd_card.gm9`]({{ base_path }}/gm9_scripts/cleanup_sd_card.gm9)
|
||||
|
||||
#### Instructions
|
||||
|
||||
|
|
@ -62,6 +63,7 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
|
||||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
|
|
@ -94,11 +96,26 @@ This section is only needed if you are prompted with the Luma3DS configuration m
|
|||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Press (Start) to save and reboot
|
||||
|
||||
##### Section IV - CTRNAND Luma3DS
|
||||
##### Section IV - Updating the System
|
||||
|
||||
If, before updating to boot9strap, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) before doing this section.
|
||||
If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) before doing this section.
|
||||
{: .notice--info}
|
||||
|
||||
1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
|
||||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error, [follow CTRTransfer](ctrtransfer), then try updating again
|
||||
|
||||
##### Section V - Installing Luma3DS Updater
|
||||
|
||||
1. Launch FBI
|
||||
1. Navigate to `SD` -> `cias`
|
||||
1. Select `lumaupdater.cia`
|
||||
1. Select the "Install CIA" option, then press (A) to confirm
|
||||
1. Press (Home) to exit FBI
|
||||
|
||||
##### Section VI - CTRNAND Luma3DS
|
||||
|
||||
1. Launch GodMode9 by holding (Start) during boot
|
||||
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
|
||||
1. Press (Home) to bring up the action menu
|
||||
|
|
@ -109,24 +126,37 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
|
|||
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
|
||||
1. Press (A) to continue
|
||||
1. Press (A) to relock write permissions
|
||||
1. Press (Start) to reboot your device
|
||||
|
||||
##### Section V - Installing Luma3DS Updater
|
||||
##### Section VII - Backup SysNAND
|
||||
|
||||
1. Launch FBI
|
||||
1. Navigate to `SD` -> `cias`
|
||||
1. Select `lumaupdater.cia`
|
||||
1. Select the "Install CIA" option, then press (A) to confirm
|
||||
1. Press (Home) to exit FBI
|
||||
1. Press (Home) to bring up the action menu
|
||||
1. Select "More..."
|
||||
1. Select "Scripts..."
|
||||
1. Select "Backup SysNAND"
|
||||
1. Press (A) to confirm
|
||||
+ This process will take some time
|
||||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<serialnumber>_nandmin_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ Replace your old arm9loaderhax NAND backup with this new boot9strap one
|
||||
1. Delete `<serialnumber>_nandmin_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
##### Section VIII - Cleanup SD Card
|
||||
|
||||
1. Press (Home) to bring up the action menu
|
||||
1. Select "More..."
|
||||
1. Select "Scripts..."
|
||||
1. Select "cleanup_sd_card"
|
||||
1. When prompted, press (A) to proceed
|
||||
1. Press (A) to continue
|
||||
1. Press (Start) to reboot
|
||||
|
||||
___
|
||||
|
||||
You can now remove any arm9loaderhax related files from your SD card, such as `arm9loaderhax.bin` on the root of your SD card and the `aeskeydb.bin` file in the `files9` folder on your SD card.
|
||||
{: .notice--info}
|
||||
|
||||
Note that the `.bak` files in the `/boot9strap/` folder on your SD card are only needed in the event of a failed boot9strap install. Once you have installed successfully, you can delete the entire `boot9strap` folder.
|
||||
{: .notice--info}
|
||||
|
||||
This fork of Luma3DS Updater allows for boot9strap compatibility by downloading and extracting the latest Luma3DS `boot.firm` for you.
|
||||
{: .notice--info}
|
||||
|
||||
|
|
|
|||
|
|
@ -210,9 +210,6 @@ Use the `Titles` menu in FBI to get the Title ID of the installed title you wish
|
|||
|
||||
## <a name="rm_nnid" />Removing an NNID without formatting your device
|
||||
|
||||
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
|
||||
{: .notice--info}
|
||||
|
||||
#### Instructions
|
||||
|
||||
1. Launch GodMode9 by holding (Start) during boot
|
||||
|
|
|
|||
|
|
@ -76,7 +76,6 @@ You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use t
|
|||
1. Press (A) to continue
|
||||
1. Press (A) to relock write permissions
|
||||
1. Press (Start) to reboot your device
|
||||
+ If you get an error with "Process Title ID: 0x0004013000004202", hold (A) + (R) + (L) + (Up) while booting to update your system from Recovery Mode
|
||||
1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
|
||||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
|
|
|
|||
|
|
@ -4,8 +4,6 @@ title: "Updating B9S"
|
|||
|
||||
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
|
||||
|
||||
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
|
||||
|
||||
{% capture notice-1 %}
|
||||
There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
|
||||
|
||||
|
|
@ -24,12 +22,9 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
|
|||
|
||||
#### What you need
|
||||
|
||||
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
|
||||
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
|
||||
* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
|
||||
* [`setup_ctrnand_luma3ds.gm9`]({{ base_path }}/gm9_scripts/setup_ctrnand_luma3ds.gm9)
|
||||
* [`cleanup_sd_card.gm9`]({{ base_path }}/gm9_scripts/cleanup_sd_card.gm9)
|
||||
|
||||
#### Instructions
|
||||
|
||||
|
|
@ -40,12 +35,8 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
|
||||
1. Power off your device
|
||||
1. Insert your SD card into your computer
|
||||
1. **Leave the old (v7.1) version of Luma3DS (`boot.firm`) as it is. You will update this later.**
|
||||
1. Copy _the contents of_ `starter.zip` to the root of your SD card
|
||||
1. Create a folder named `boot9strap` on the root of your SD card
|
||||
1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
|
||||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Reinsert your SD card into your device
|
||||
|
|
@ -56,43 +47,21 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Launch SafeB9SInstaller by pressing (A)
|
||||
1. Wait for all safety checks to complete
|
||||
1. When prompted, input the key combo given to install boot9strap
|
||||
1. Once it has completed, press (A) to reboot your device
|
||||
1. Power off your device
|
||||
+ Note that you will receive the error `Unsupported launcher (argc = 0)` until you follow the rest of the instructions on this page
|
||||
1. Once it has completed, hold (Start) while pressing (A) to reboot your device to the Luma3DS chainloader
|
||||
|
||||
##### Section III - Updating Luma3DS
|
||||
|
||||
1. Insert your SD card into your computer
|
||||
1. Delete the existing `boot.firm` from the root of your SD card
|
||||
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
##### Section IV - Configuring Luma3DS
|
||||
|
||||
1. Your device should have rebooted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Press (Start) to save and reboot
|
||||
|
||||
##### Section V - CTRNAND Luma3DS
|
||||
##### Section III - Cleanup SD Card
|
||||
|
||||
1. Launch GodMode9 by holding (Start) during boot
|
||||
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
|
||||
1. Press (Home) to bring up the action menu
|
||||
1. Select "More..."
|
||||
1. Select "Scripts..."
|
||||
1. Select "setup_ctrnand_luma3ds"
|
||||
1. Select "cleanup_sd_card"
|
||||
1. When prompted, press (A) to proceed
|
||||
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
|
||||
1. Press (A) to continue
|
||||
1. Press (A) to relock write permissions
|
||||
1. Press (Start) to reboot your device
|
||||
1. Press (Start) to reboot
|
||||
|
||||
___
|
||||
|
||||
Note that the `.bak` files in the `/boot9strap/` folder on your SD card are only needed in the event of a failed boot9strap install. Once you have installed successfully, you can delete the entire `boot9strap` folder.
|
||||
{: .notice--info}
|
||||
|
||||
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
|
||||
{: .notice--info}
|
||||
It is recommended that you use Luma3DS Updater to update your Luma3DS installation after you have completed the boot9strap update.
|
||||
{: .notice--info}
|
||||
|
|
@ -47,7 +47,12 @@ rm -o -s 0:/ntrboot.firm
|
|||
rm -o -s 0:/boot9strap
|
||||
rm -o -s 0:/cias
|
||||
rm -o -s 0:/gm9/scripts/setup_ctrnand_luma3ds.gm9
|
||||
rm -o -s "0:/gm9/scripts/Clean Setup Files.gm9"
|
||||
rm -o -s 0:/gm9/scripts/cleanup_sd_card.gm9
|
||||
|
||||
#A9LH files
|
||||
|
||||
rm -o -s 0:/arm9loaderhax.bin
|
||||
rm -o -s 0:/files9/aeskeydb.bin
|
||||
|
||||
set ERRORMSG "Cleanup completed successfully"
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue