Lade deine movable.sed mit der “Choose File” Option hoch
Klicke “Build and Download”
@@ -556,7 +542,7 @@ window.cookieconsent.initialise({
This will download an exploit DSiWare called F00D43D5.bin and a payload called bb3.bin inside of a zip archive (DSIWARE_EXPLOIT.zip)
-
Copy bb3.bin from DSIWARE_EXPLOIT.zip to the root of your SD card
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
This file does not need to be opened or extracted
@@ -578,33 +564,32 @@ window.cookieconsent.initialise({
-
Abschnitt II - Tastenfunktionalität überprüfen
+
Section II - BannerBomb3
-
In this section, you will see whether you can access Safe Mode on your console. This will determine which method you will follow on the next page.
-
-
Your SD card should remain in your computer while you perform this check.
-
-
In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.
+
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
Power on your console
-
Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
-
The camera applet should appear
+
Your console should show the BB3 multihax menu
+
+
+
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
+
+
Your console will automatically reboot
Power off your console
+
Stecke deine SD-Karte in deinen Computer
+
Navigiere zu Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare auf deiner SD-Karte
+
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore
-
Nächste Schritte: Wähle einen Exploit
-
-
If the camera appeared in the previous section, Safe Mode is likely to be working on your console.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
@@ -535,7 +519,7 @@ window.cookieconsent.initialise({
I am on the latest system version. Is my console hackable without any external hardware/prerequisites?
-
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
+
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
+
+
+
+
+
+
+
+Technische Details (optional)
+
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
+
+
+
+
This method requires a working 3DS camera.
+
+
Was du brauchst
+
+
+
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Anleitung
+
+
Abschnitt I - Vorbereitungen
+
+
+
Power off your console
+
Stecke deine SD-Karte in deinen Computer
+
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
+
+
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+
+
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
+
+
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+
+
+
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
+
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
+
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
+
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - freakyhax
+
+
+
Reinsert your SD card into your console
+
Power on your console
+
Launch Freakyforms Deluxe
+
In the game menu, select Play -> Camera -> Load a QR code
+
Select the QR code
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Schritt III - boot9strap installieren
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Drücke (Start) zum Speichern und neustarten
+
+
+
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
+
+
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
+
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch nimdsphax which launches SafeB9SInstaller.
-
See here for information about uloader and here for information about menuhax67.
+
See here for information about nimdsphax and here for information about menuhax67.
-
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
-
Section V - Removing menuhax67
+
Section IV - Removing menuhax67
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
+
+
+
+
+
+
+
+Technische Details (optional)
+
+
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
+
See here for information about uloader and here for information about menuhax67.
+
+
+
+
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
+
+
+
Abschnitt I - Vorbereitungen
+
+
+
Power off your console
+
Stecke deine SD-Karte in deinen Computer
+
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
+
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
+
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
+
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
+
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy uloader.3dsx to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
+
+
Section II - menuhax67
+
+
In this section you will use the menuhax67 exploit installed earlier to launch uloader, which will load SafeB9SInstaller.
+
+
+
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
+
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
+
+
If the exploit was successful, your console will have booted into the Homebrew Launcher
+
Launch uloader from the list of homebrew
+
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
+
+
If the console freezes or crashes, force power off the console, then retry this section
+
+
+
+
+
Schritt III - boot9strap installieren
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Drücke (Start) zum Speichern und neustarten
+
+
+
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
+
+
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
+
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
+
+
+
Section IV - Removing menuhax67
+
+
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
+
+
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
+
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
+
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
+
+
+
+
+
+
+
+Technische Details (optional)
+
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
+
+
+
This method requires a working 3DS camera.
+
+
This process will overwrite your Cubic Ninja save file, if you have one.
If the game exits to the HOME Menu, then the exploit has installed correctly
+
+
+
Launch “Cubic Ninja” again
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Schritt III - boot9strap installieren
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Drücke (Start) zum Speichern und neustarten
+
+
+
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
+
+
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
+
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
Was du brauchst
+
+
+
The game “Pokémon Picross” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Pokémon Picross
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Anleitung
+
+
Abschnitt I - Vorbereitungen
+
+
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
+
+
+
Power off your console
+
Stecke deine SD-Karte in deinen Computer
+
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
+
+
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+
+
+
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
+
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
+
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
+
+
+
+
Section II - PicHaxx
+
+
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Schritt III - boot9strap installieren
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Drücke (Start) zum Speichern und neustarten
+
+
+
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
+
+
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
+
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
+
+
+
+
+
+
+
This set of instructions does not support the Japanese version of SmileBASIC.
+
+
+Technische Details (optional)
+
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
+
+
+
Was du brauchst
+
+
The game “SmileBASIC” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install SmileBASIC
+
+
+
The latest release of smilehax-IIe (direct download)
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Anleitung
+
+
Abschnitt I - Vorbereitungen
+
+
+
Power off your console
+
Stecke deine SD-Karte in deinen Computer
+
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
+
+
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+
+
+
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
+
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
+
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
+
Copy the petitcom .icn for your region to the root of your SD card
+
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - smilehax
+
+
+
Launch SmileBASIC
+
+
Update the game if prompted
+
+
+
Select the “Publish/Download Projects” option
+
Select the “Download (Receive) using Public Key” option
+
Press the “Yes” button
+
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
+
Press the “Yes” button to confirm the download of PMODEM141
+
Press “OK”, then “Back”, then “Browse Projects”
+
Select PMODEM141, then press “Select File”
+
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
+
Select RECEIVE FILE SIMPLEX
+
Prepare the device you use to play the .wav file
+
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
+
Now select 300BPS, then play the .wav file
+
When it finishes, press “Yes”, then press “OK”
+
Press the START button
+
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
+
+
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
+
+
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Schritt III - boot9strap installieren
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Drücke (Start) zum Speichern und neustarten
+
+
+
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
+
+
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
+
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
+
+
+
+
+
+
+
+Technische Details (optional)
+
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
Was du brauchst
+
+
+
The game “Steel Diver: Sub Wars” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Anleitung
+
+
Abschnitt I - Vorbereitungen
+
+
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
+
+
+
Power off your console
+
Stecke deine SD-Karte in deinen Computer
+
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
+
+
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+
+
+
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
+
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
+
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
+
Copy the steelhax folder from the Steelhax-release.zip to the root of your SD card
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - Steelminer
+
+
In this section, you will create a hacked Steel Diver: Sub Wars save file that, when used, will load the Homebrew Launcher on your console.
+
+
+
Launch “Steel Diver: Sub Wars” once and select a Mii to initialize your save file
+
+
Decline the game update when prompted
+
If you have already updated the game, use the Data Management menu of the System Settings to delete the update
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> <8-character-region> -> data on your SD card
+
+
EUR Region: 000d7e00
+
JPN Region: 000d7c00
+
USA Region: 000d7d00
+
+
+
Copy the newly downloaded 00000001.sav file to the data folder on your SD card
+
+
Overwrite the old save file when prompted
+
+
+
Reinsert your SD card into your console
+
Power on your console
+
Launch “Steel Diver: Sub Wars”
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Schritt III - boot9strap installieren
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Drücke (Start) zum Speichern und neustarten
+
+
+
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
+
+
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
+
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
+
+
+
+
+
+
+
+Technische Details (optional)
+
For technical details on the exploits that you will be using on this page, see here.
+
+
+
+
Kompatibilitätshinweise
+
+
Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions, and 11.17.0 in the EUR, JPN and USA regions.
+
+
The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the console you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+
+
Was du brauchst
+
+
+
The latest release of super-skaterhax (the release .zip file)
The latest release of Luma3DS (the Luma3DS .zip file)
+
+
+
Abschnitt I - Vorbereitungen
+
+
In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+
+
Power off your console
+
Stecke deine SD-Karte in deinen Computer
+
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
+
+
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+
+
+
Copy everything inside the folder for your console’s region (and also system version if the region is USA) in the super-skaterhax .zip to the root of your SD card
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
+
+
Section II - super-skaterhax
+
+
In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+
If you haven’t already, make sure you have a working Internet connection set up on your console.
+
+
+
On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+
+
If you are unable to open the camera, open the Internet Browser and manually type the URL instead (https://zoogie.github.io/web/super/ for EUR/USA/JPN, https://zoogie.github.io/web/korea for KOR)
+
+
+
Tap the QR code button and scan one of the following QR codes for your console’s region here
+
+
If you get a security certificate warning, press (A) to allow the connection
+
+
+
Press the (Select) button to open the bookmark tab
+
+
If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+
+
+
Tap “Bookmark this page”
+
Press (B) once to return to the browser
+
Press (Start) to open the context menu
+
+
If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+
+
+
Tap on “Settings”
+
Tap on “Delete Cookies”
+
Drücke (A), um fortzufahren
+
Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+
Select the “GO GO!” button on the top screen
+
+
If any prompts appear, approve all of them
+
If your console freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+
If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
+
+
+
+
+
Schritt III - boot9strap installieren
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Drücke (Start) zum Speichern und neustarten
+
+
+
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
+
+
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
+
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
Die Datei SafeB9SInstaller.bin fehlt oder ist falsch platziert. Lade die neueste Version von SafeB9SInstaller herunter, entpacke sie und platziere SafeB9SInstaller.bin im Stammverzeichnis deiner SD-Karte. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
+
+
SigHaxed FIRM was not installed! Check lower screen for more info.
@@ -624,7 +615,7 @@ verwenden wirst
Die Webseite hat festgestellt, dass deine movable.sed nicht brute-forcebar ist. Stell sicher, dass du der Seite die richtige ID0 gegeben hast. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.
-
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Homebrew Launcher (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.
+
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.
@@ -662,50 +653,14 @@ verwenden wirst
Möglicherweise gibt es ein Problem mit deiner F00D43D5.bin Datei (sie kann beschädigt oder für den falschen 3DS bestimmt sein). Erstelle deine F00D43D5.bin Datei mit dem Bannerbomb3 Injector neu, und stelle sicher, dass du die movable.sed Datei für deine Konsole benutzt.
-
boot9strap installieren (USM)
+
Installing boot9strap (Fredtool-Inject)
-Safe Mode System Update funktioniert, anstatt den Fehler 003-1099 zu zeigen
-
-
unSAFE_MODE ist nicht installiert. Folge der Anleitung um es zu installieren.
-
-
-
-Roter Bildschirm nach dem Drücken auf "detailliertes Setup"
-
-
Die Datei usm.bin fehlt oder ist falsch platziert. Lade die neueste Version von unSAFE_MODE herunter und platziere usm.bin im Stammverzeichnis deiner SD-Karte. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
-
-
Es besteht auch die Möglichkeit, dass die Konsole deine SD-Karte nicht liest. Stelle sicher, dass sie korrekt hineingesteckt und formatiert ist.
-
-
-
-Failed to open SafeB9SInstaller.bin
-
-
Die Datei SafeB9SInstaller.bin fehlt oder ist falsch platziert. Lade die neueste Version von SafeB9SInstaller herunter, entpacke sie und platziere SafeB9SInstaller.bin im Stammverzeichnis deiner SD-Karte. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
-
-
-
-Failed to mount the SD card!
-
-
Sichere deine Daten und formatiere deine SD-Karte als FAT32 mit dem empfohlenen Werkzeug je nach Betriebssystem (Windows, macOS, Linux). MiniTool Partition Wizard und das HP Formatierungswerkzeug (HPUSBDisk) sind bekannt für Probleme mit 3DS SD-Karten.
-
-
Wenn dies nicht gelingt, benutze eine andere SD-Karte.
-
-
-
boot9strap installieren (Fredtool)
-
-
-Error bei der Fredtool Injector Seite
+Error on DSiHaxInjector page
Stelle sicher, dass deine movable.sed und das DSiWare-Backup von derselben Konsole stammen. Eine Unterschied führt zu einem Fehler.
-
-"Haxxxxxxxxx!" ist nicht auswählbar, da das BB3 multihax menu erscheint
-
-
Du hast vergessen F00D43D5.bin von der SD-Karte zu löschen. Navigiere zu Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare auf deiner SD-Karte und lösche die F00D43D5.bin Datei.
-
-
"Haxxxxxxxxx!" erscheint nicht
@@ -713,17 +668,11 @@ verwenden wirst
-Nintendo DS-Verbindungen starten normal
+DSiWare launches normally
Haxxxxxxxxx! wurde nicht von deiner SD-Karte in deinen Systemspeicher kopiert.
-
-Schwarzer Bildschirm beim Starten der Nintendo DS-Verbundungen
-
-
Deine DS Verbindungseinstellungen sind defekt, und du wirst den Homebrew Launcher benötigen, um dieses Problem zu beheben. Trete Nintendo Homebrew auf Discord für mehr Hilfe bei.
-
-
SD-Karte ist in Flipnote ausgegraut
@@ -759,14 +708,14 @@ verwenden wirst
"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
+
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
@@ -778,7 +727,7 @@ verwenden wirst
"An error has occurred, forcing the software to close..." (white message box)
-
There is an issue with your otherapp.bin file. Download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
+
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
@@ -809,12 +758,6 @@ verwenden wirst
You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Trete Nintendo Homebrew auf Discord für mehr Hilfe bei.
-
-Failed to open SafeB9SInstaller.bin
-
-
Die Datei SafeB9SInstaller.bin fehlt oder ist falsch platziert. Lade die neueste Version von SafeB9SInstaller herunter, entpacke sie und platziere SafeB9SInstaller.bin im Stammverzeichnis deiner SD-Karte. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
-
-
Failed to mount the SD card!
Sichere deine Daten und formatiere deine SD-Karte als FAT32 mit dem empfohlenen Werkzeug je nach Betriebssystem (Windows, macOS, Linux). MiniTool Partition Wizard und das HP Formatierungswerkzeug (HPUSBDisk) sind bekannt für Probleme mit 3DS SD-Karten.
@@ -888,12 +831,6 @@ verwenden wirst
-
-Failed to open SafeB9SInstaller.bin
-
-
Die Datei SafeB9SInstaller.bin fehlt oder ist falsch platziert. Lade die neueste Version von SafeB9SInstaller herunter, entpacke sie und platziere SafeB9SInstaller.bin im Stammverzeichnis deiner SD-Karte. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
-
-
Frozen on "Doing agbhax..."
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
@@ -913,7 +850,7 @@ verwenden wirst
Wenn dies nicht gelingt, benutze eine andere SD-Karte.
-
Homebrew Launcher (super-skaterhax)
+
Installing boot9strap (super-skaterhax)
"An error has occurred. Please save your data in any software currently in use, then restart the system."
diff --git a/de_DE/uninstall-cfw.html b/de_DE/uninstall-cfw.html
index 4429e313a4..0bcbf36c51 100644
--- a/de_DE/uninstall-cfw.html
+++ b/de_DE/uninstall-cfw.html
@@ -358,23 +358,23 @@ window.cookieconsent.initialise({
-
Upload your movable.sed using the “Choose File” option
Click “Build and Download”
@@ -556,7 +542,7 @@ window.cookieconsent.initialise({
This will download an exploit DSiWare called F00D43D5.bin and a payload called bb3.bin inside of a zip archive (DSIWARE_EXPLOIT.zip)
-
Copy bb3.bin from DSIWARE_EXPLOIT.zip to the root of your SD card
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
This file does not need to be opened or extracted
@@ -581,33 +567,32 @@ window.cookieconsent.initialise({
-
Section II - Hardware Button Check
+
Sección II - BannerBomb3
-
In this section, you will see whether you can access Safe Mode on your console. This will determine which method you will follow on the next page.
-
-
Your SD card should remain in your computer while you perform this check.
-
-
In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.
+
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
Power on your console
-
Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
-
The camera applet should appear
+
Your console should show the BB3 multihax menu
+
+
+
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
+
+
Your console will automatically reboot
Power off your console
+
Inserta tu tarjeta SD en tu computadora
+
Ve a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare en tu tarjeta SD
+
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. Este archivo ya no será necesario
-
Next steps: Choose an exploit
-
-
If the camera appeared in the previous section, Safe Mode is likely to be working on your console.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
@@ -535,7 +519,7 @@ window.cookieconsent.initialise({
I am on the latest system version. Is my console hackable without any external hardware/prerequisites?
-
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
+
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
+
+
+
+
This method requires a working 3DS camera.
+
+
Qué necesitas
+
+
+
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instrucciones
+
+
Sección I - Preparativos
+
+
+
Power off your console
+
Inserta tu tarjeta SD en tu computadora
+
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
+
+
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
+
+
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
+
+
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
+
+
+
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
+
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
+
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
+
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - freakyhax
+
+
+
Reinsert your SD card into your console
+
Power on your console
+
Launch Freakyforms Deluxe
+
In the game menu, select Play -> Camera -> Load a QR code
+
Select the QR code
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Sección III - Instalar boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
When prompted, input the key combo given on the top screen to install boot9strap
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Presiona (Start) para guardar y reiniciar
+
+
+
At this point, your console will boot to Luma3DS by default.
+
+
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+
On the next page, you will install useful homebrew applications to complete your setup.
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch nimdsphax which launches SafeB9SInstaller.
-
See here for information about uloader and here for information about menuhax67.
+
See here for information about nimdsphax and here for information about menuhax67.
-
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
On the next page, you will install useful homebrew applications to complete your setup.
-
Section V - Removing menuhax67
+
Section IV - Removing menuhax67
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
+
See here for information about uloader and here for information about menuhax67.
+
+
+
+
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
The latest release of Luma3DS (the Luma3DS .zip file)
+
+
+
Sección I - Preparativos
+
+
+
Power off your console
+
Inserta tu tarjeta SD en tu computadora
+
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
+
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
+
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
+
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
+
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy uloader.3dsx to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
+
+
Section II - menuhax67
+
+
In this section you will use the menuhax67 exploit installed earlier to launch uloader, which will load SafeB9SInstaller.
+
+
+
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
+
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
+
+
If the exploit was successful, your console will have booted into the Homebrew Launcher
+
Launch uloader from the list of homebrew
+
Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
+
+
If the console freezes or crashes, force power off the console, then retry this section
+
+
+
+
+
Sección III - Instalar boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
When prompted, input the key combo given on the top screen to install boot9strap
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Presiona (Start) para guardar y reiniciar
+
+
+
At this point, your console will boot to Luma3DS by default.
+
+
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+
On the next page, you will install useful homebrew applications to complete your setup.
+
+
+
Section IV - Removing menuhax67
+
+
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
+
+
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
+
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
+
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
+
+
+
This method requires a working 3DS camera.
+
+
This process will overwrite your Cubic Ninja save file, if you have one.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
Qué necesitas
+
+
+
The game “Pokémon Picross” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Pokémon Picross
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instrucciones
+
+
Sección I - Preparativos
+
+
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
+
+
+
Power off your console
+
Inserta tu tarjeta SD en tu computadora
+
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
+
+
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
+
+
+
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
+
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
+
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
+
+
+
+
Section II - PicHaxx
+
+
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
This set of instructions does not support the Japanese version of SmileBASIC.
+
+
+Technical Details (optional)
+
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
+
+
+
Qué necesitas
+
+
The game “SmileBASIC” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install SmileBASIC
+
+
+
The latest release of smilehax-IIe (direct download)
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instrucciones
+
+
Sección I - Preparativos
+
+
+
Power off your console
+
Inserta tu tarjeta SD en tu computadora
+
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
+
+
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
+
+
+
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
+
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
+
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
+
Copy the petitcom .icn for your region to the root of your SD card
+
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - smilehax
+
+
+
Launch SmileBASIC
+
+
Update the game if prompted
+
+
+
Select the “Publish/Download Projects” option
+
Select the “Download (Receive) using Public Key” option
+
Press the “Yes” button
+
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
+
Press the “Yes” button to confirm the download of PMODEM141
+
Press “OK”, then “Back”, then “Browse Projects”
+
Select PMODEM141, then press “Select File”
+
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
+
Select RECEIVE FILE SIMPLEX
+
Prepare the device you use to play the .wav file
+
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
+
Now select 300BPS, then play the .wav file
+
When it finishes, press “Yes”, then press “OK”
+
Press the START button
+
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
+
+
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
+
+
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Sección III - Instalar boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
When prompted, input the key combo given on the top screen to install boot9strap
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Presiona (Start) para guardar y reiniciar
+
+
+
At this point, your console will boot to Luma3DS by default.
+
+
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+
On the next page, you will install useful homebrew applications to complete your setup.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
Qué necesitas
+
+
+
The game “Steel Diver: Sub Wars” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instrucciones
+
+
Sección I - Preparativos
+
+
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
+
+
+
Power off your console
+
Inserta tu tarjeta SD en tu computadora
+
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
+
+
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
+
+
+
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
+
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
+
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
+
Copy the steelhax folder from the Steelhax-release.zip to the root of your SD card
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - Steelminer
+
+
In this section, you will create a hacked Steel Diver: Sub Wars save file that, when used, will load the Homebrew Launcher on your console.
+
+
+
Launch “Steel Diver: Sub Wars” once and select a Mii to initialize your save file
+
+
Decline the game update when prompted
+
If you have already updated the game, use the Data Management menu of the System Settings to delete the update
For technical details on the exploits that you will be using on this page, see here.
+
+
+
+
Compatibility Notes
+
+
Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions, and 11.17.0 in the EUR, JPN and USA regions.
+
+
The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the console you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+
+
Qué necesitas
+
+
+
The latest release of super-skaterhax (the release .zip file)
The latest release of Luma3DS (the Luma3DS .zip file)
+
+
+
Sección I - Preparativos
+
+
In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+
+
Power off your console
+
Inserta tu tarjeta SD en tu computadora
+
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
+
+
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
+
+
+
Copy everything inside the folder for your console’s region (and also system version if the region is USA) in the super-skaterhax .zip to the root of your SD card
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
+
+
Section II - super-skaterhax
+
+
In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+
If you haven’t already, make sure you have a working Internet connection set up on your console.
+
+
+
On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+
+
If you are unable to open the camera, open the Internet Browser and manually type the URL instead (https://zoogie.github.io/web/super/ for EUR/USA/JPN, https://zoogie.github.io/web/korea for KOR)
+
+
+
Tap the QR code button and scan one of the following QR codes for your console’s region here
+
+
If you get a security certificate warning, press (A) to allow the connection
+
+
+
Press the (Select) button to open the bookmark tab
+
+
If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+
+
+
Tap “Bookmark this page”
+
Press (B) once to return to the browser
+
Press (Start) to open the context menu
+
+
If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+
+
+
Tap on “Settings”
+
Tap on “Delete Cookies”
+
Presiona (A) para continuar
+
Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+
Select the “GO GO!” button on the top screen
+
+
If any prompts appear, approve all of them
+
If your console freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+
If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
Falta el archivo SafeB9SInstaller.bin o está fuera de lugar. Download the latest release of SafeB9SInstaller, extract it, and place SafeB9SInstaller.bin on the root of your SD card. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
+
+
SigHaxed FIRM was not installed! Revisa la pantalla inferior para más información.
El sitio web ha determinado que tu movable.sed no puede ser minado. Asegúrate de haber escrito correctamente el ID0 en el sitio web. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.
-
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Homebrew Launcher (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.
+
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.
Puede haber un problema con el archivo F00D43D5.bin (puede estar corrupto o preparado para otra consola 3DS). Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.
-
Instalar boot9strap (USM)
+
Installing boot9strap (Fredtool-Inject)
-Safe Mode system update succeeds instead of giving error 003-1099
-
-
The file usm.bin is missing or misplaced. Download the latest release of unSAFE_MODE and place usm.bin on the root of your SD card. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
-
-
There is also a possibility that the console isn’t reading your SD card. Make sure it is inserted and formatted correctly.
-
-
-
-Failed to open SafeB9SInstaller.bin
-
-
Falta el archivo SafeB9SInstaller.bin o está fuera de lugar. Download the latest release of SafeB9SInstaller, extract it, and place SafeB9SInstaller.bin on the root of your SD card. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
-
-
-
-Failed to mount the SD card!
-
-
Back up your data and reformat your SD card as FAT32 with the recommended tool depending on your operating system (Windows, macOS, Linux). MiniTool Partition Wizard and the HP formatting tool (HPUSBDisk) are known to cause issues with 3DS SD cards.
-
-
If this is unsuccessful, try using another SD card.
-
-
-
Instalar boot9strap (Fredtool)
-
-
-Error on Fredtool Injector page
+Error on DSiHaxInjector page
Asegúrate de que tu archivo movable.sed y la copia de seguridad de DSiWare provienen de la misma consola. El error aparece cuando los archivos no coinciden.
-
-Unable to select "Haxxxxxxxxx!" because the BB3 multihax menu appears
-
-
You forgot to delete F00D43D5.bin from the SD card. Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare on your SD card and delete the F00D43D5.bin file.
-
-
"Haxxxxxxxxx!" does not appear
@@ -712,17 +667,11 @@ window.cookieconsent.initialise({
-DS Connection Settings launches normally
+DSiWare launches normally
Haxxxxxxxxx! no fue copiado de la tarjeta SD a la memoria de la consola.
-
-Black screen when launching DS Connection Settings
-
-
El menú de Conexiones de Nintendo DS no funciona, y necesitarás acceso al Homebrew Launcher para solucionar este problema. Únete al Discord de Nintendo Homebrew para obtener ayuda.
-
-
SD card is grayed out in Flipnote
@@ -758,14 +707,14 @@ window.cookieconsent.initialise({
"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
+
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
@@ -777,7 +726,7 @@ window.cookieconsent.initialise({
"An error has occurred, forcing the software to close..." (white message box)
-
There is an issue with your otherapp.bin file. Download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
+
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Únete al Discord de Nintendo Homebrew para obtener ayuda.
-
-Failed to open SafeB9SInstaller.bin
-
-
Falta el archivo SafeB9SInstaller.bin o está fuera de lugar. Download the latest release of SafeB9SInstaller, extract it, and place SafeB9SInstaller.bin on the root of your SD card. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
-
-
Failed to mount the SD card!
Back up your data and reformat your SD card as FAT32 with the recommended tool depending on your operating system (Windows, macOS, Linux). MiniTool Partition Wizard and the HP formatting tool (HPUSBDisk) are known to cause issues with 3DS SD cards.
@@ -887,12 +830,6 @@ window.cookieconsent.initialise({
-
-Failed to open SafeB9SInstaller.bin
-
-
Falta el archivo SafeB9SInstaller.bin o está fuera de lugar. Download the latest release of SafeB9SInstaller, extract it, and place SafeB9SInstaller.bin on the root of your SD card. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
-
-
Frozen on "Doing agbhax..."
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
If this is unsuccessful, try using another SD card.
-
Homebrew Launcher (super-skaterhax)
+
Installing boot9strap (super-skaterhax)
"An error has occurred. Please save your data in any software currently in use, then restart the system."
diff --git a/es_ES/uninstall-cfw.html b/es_ES/uninstall-cfw.html
index 5d0075a9e4..4431b09b8e 100644
--- a/es_ES/uninstall-cfw.html
+++ b/es_ES/uninstall-cfw.html
@@ -358,23 +358,23 @@ window.cookieconsent.initialise({
-
Téléchargez votre movable.sed en utilisant l’option « Choisir un fichier »
Cliquez sur “Build and Download”
@@ -553,7 +540,7 @@ window.cookieconsent.initialise({
Ceci va télécharger un exploit DSiWare appelé F00D43D5.bin et un payload appelé bb3.bin à l’intérieur d’une archive zip (DSIWARE_EXPLOIT.zip)
-
Copiez bb3.bin depuis l’archive DSIWARE_EXPLOIT.zip vers la racine de votre carte SD
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
Ce fichier n’a pas besoin d’être ouvert ou extrait
@@ -578,9 +565,32 @@ window.cookieconsent.initialise({
+
Section II - BannerBomb3
+
+
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
+
+
+
Power on your console
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
+
+
Your console should show the BB3 multihax menu
+
+
+
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
+
+
Your console will automatically reboot
+
+
+
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare sur votre carte SD
+
Supprimez F00D43D5.bin de votre dossier Nintendo DSiWare de votre ordinateur. Ce fichier ne sera plus nécessaire
Téléchargez votre movable.sed en utilisant l’option « Choisir un fichier »
Cliquez sur “Build and Download”
@@ -556,7 +542,7 @@ window.cookieconsent.initialise({
Ceci va télécharger un exploit DSiWare appelé F00D43D5.bin et un payload appelé bb3.bin à l’intérieur d’une archive zip (DSIWARE_EXPLOIT.zip)
-
Copiez bb3.bin depuis l’archive DSIWARE_EXPLOIT.zip vers la racine de votre carte SD
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
Ce fichier n’a pas besoin d’être ouvert ou extrait
@@ -581,33 +567,32 @@ window.cookieconsent.initialise({
-
Section II - Contrôle du bon fonctionnement des boutons
+
Section II - BannerBomb3
-
In this section, you will see whether you can access Safe Mode on your console. Cela déterminera la méthode que vous allez suivre sur la page suivante.
-
-
Votre carte SD doit rester dans votre ordinateur pendant que vous effectuez cette vérification.
-
-
In this section, you will see whether your shoulder buttons are working on your console. Cela déterminera la méthode que vous allez suivre sur la page suivante.
+
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
Power on your console
-
Une fois arrivé sur le Menu HOME, appuyez sur les boutons (L) et (R) en même temps
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
-
L’applet de l’appareil photo numérique devrait apparaître
+
Your console should show the BB3 multihax menu
+
+
+
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
+
+
Your console will automatically reboot
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare sur votre carte SD
+
Supprimez F00D43D5.bin de votre dossier Nintendo DSiWare de votre ordinateur. Ce fichier ne sera plus nécessaire
-
Étape suivante : Choisissez un exploit
-
-
If the camera appeared in the previous section, Safe Mode is likely to be working on your console.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
@@ -535,7 +519,7 @@ window.cookieconsent.initialise({
Je suis sur la dernière version du logiciel système. Is my console hackable without any external hardware/prerequisites?
-
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
+
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
Si vous appréciez ce guide, nous acceptons les Dons.
+
+
+
+
+
+
+
+Détails techniques (facultatif)
+
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
+
+
+
+
This method requires a working 3DS camera.
+
+
Ce dont vous avez besoin
+
+
+
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instructions
+
+
Section I - Préparatifs
+
+
+
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
+
+
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
+
+
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
+
+
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
+
+
+
Créez un dossier nommé boot9strap à la racine de votre carte SD
+
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
+
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
+
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Réinsérez votre carte SD dans votre console
+
Power on your console
+
+
+
Section II - freakyhax
+
+
+
Réinsérez votre carte SD dans votre console
+
Power on your console
+
Launch Freakyforms Deluxe
+
In the game menu, select Play -> Camera -> Load a QR code
+
Select the QR code
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Section III - Installation de boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
+
+
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
+
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+
+
+
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
+
+
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
+
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch nimdsphax which launches SafeB9SInstaller.
-
See here for information about uloader and here for information about menuhax67.
+
See here for information about nimdsphax and here for information about menuhax67.
-
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
-
Section V - Removing menuhax67
+
Section IV - Removing menuhax67
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
+
See here for information about uloader and here for information about menuhax67.
+
+
+
+
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
+
+
+
Section I - Préparatifs
+
+
+
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
+
Créez un dossier nommé boot9strap à la racine de votre carte SD
+
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
+
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
+
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy uloader.3dsx to the /3ds/ folder on your SD card
+
Réinsérez votre carte SD dans votre console
+
+
+
Section II - menuhax67
+
+
In this section you will use the menuhax67 exploit installed earlier to launch uloader, which will load SafeB9SInstaller.
+
+
+
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
+
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
+
+
If the exploit was successful, your console will have booted into the Homebrew Launcher
+
Launch uloader from the list of homebrew
+
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+
+
If the console freezes or crashes, force power off the console, then retry this section
+
+
+
+
+
Section III - Installation de boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
+
+
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
+
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+
+
+
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
+
+
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
+
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
+
+
+
Section IV - Removing menuhax67
+
+
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
+
+
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
+
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
+
Si vous appréciez ce guide, nous acceptons les Dons.
+
+
+
+
+
+
+
+Détails techniques (facultatif)
+
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
+
+
+
This method requires a working 3DS camera.
+
+
This process will overwrite your Cubic Ninja save file, if you have one.
The latest release of Luma3DS (the Luma3DS .zip file)
+
+
+
Instructions
+
+
Section I - Préparatifs
+
+
+
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
Copy Launcher.dat from the folder appropriate for your console from the ninjhax2-dx .zip file to the root of your SD card
+
+
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
+
+
+
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
+
Créez un dossier nommé boot9strap à la racine de votre carte SD
+
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
+
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
+
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
If the game exits to the HOME Menu, then the exploit has installed correctly
+
+
+
Launch “Cubic Ninja” again
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Section III - Installation de boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
+
+
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
+
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+
+
+
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
+
+
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
+
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
Ce dont vous avez besoin
+
+
+
The game “Pokémon Picross” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Pokémon Picross
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instructions
+
+
Section I - Préparatifs
+
+
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
+
+
+
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
+
+
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
+
+
+
Créez un dossier nommé boot9strap à la racine de votre carte SD
+
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
+
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
+
+
+
+
Section II - PicHaxx
+
+
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Section III - Installation de boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
+
+
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
+
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+
+
+
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
+
+
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
+
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
Si vous appréciez ce guide, nous acceptons les Dons.
+
+
+
+
+
+
+
This set of instructions does not support the Japanese version of SmileBASIC.
+
+
+Détails techniques (facultatif)
+
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
+
+
+
Ce dont vous avez besoin
+
+
The game “SmileBASIC” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install SmileBASIC
+
+
+
The latest release of smilehax-IIe (direct download)
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instructions
+
+
Section I - Préparatifs
+
+
+
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
+
+
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
+
+
+
Créez un dossier nommé boot9strap à la racine de votre carte SD
+
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
+
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
+
Copy the petitcom .icn for your region to the root of your SD card
+
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Réinsérez votre carte SD dans votre console
+
Power on your console
+
+
+
Section II - smilehax
+
+
+
Launch SmileBASIC
+
+
Update the game if prompted
+
+
+
Select the “Publish/Download Projects” option
+
Select the “Download (Receive) using Public Key” option
+
Press the “Yes” button
+
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
+
Press the “Yes” button to confirm the download of PMODEM141
+
Press “OK”, then “Back”, then “Browse Projects”
+
Select PMODEM141, then press “Select File”
+
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
+
Select RECEIVE FILE SIMPLEX
+
Prepare the device you use to play the .wav file
+
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
+
Now select 300BPS, then play the .wav file
+
When it finishes, press “Yes”, then press “OK”
+
Press the START button
+
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
+
+
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
+
+
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Section III - Installation de boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
+
+
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
+
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+
+
+
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
+
+
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
+
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
Si vous appréciez ce guide, nous acceptons les Dons.
+
+
+
+
+
+
+
+Détails techniques (facultatif)
+
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
Ce dont vous avez besoin
+
+
+
The game “Steel Diver: Sub Wars” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instructions
+
+
Section I - Préparatifs
+
+
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
+
+
+
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
+
+
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
+
+
+
Créez un dossier nommé boot9strap à la racine de votre carte SD
+
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
+
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
+
Copy the steelhax folder from the Steelhax-release.zip to the root of your SD card
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Réinsérez votre carte SD dans votre console
+
Power on your console
+
+
+
Section II - Steelminer
+
+
In this section, you will create a hacked Steel Diver: Sub Wars save file that, when used, will load the Homebrew Launcher on your console.
+
+
+
Launch “Steel Diver: Sub Wars” once and select a Mii to initialize your save file
+
+
Decline the game update when prompted
+
If you have already updated the game, use the Data Management menu of the System Settings to delete the update
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> <8-character-region> -> data on your SD card
+
+
EUR Region: 000d7e00
+
JPN Region: 000d7c00
+
USA Region: 000d7d00
+
+
+
Copy the newly downloaded 00000001.sav file to the data folder on your SD card
+
+
Overwrite the old save file when prompted
+
+
+
Réinsérez votre carte SD dans votre console
+
Power on your console
+
Launch “Steel Diver: Sub Wars”
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Section III - Installation de boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
+
+
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
+
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+
+
+
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
+
+
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
+
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
Si vous appréciez ce guide, nous acceptons les Dons.
+
+
+
+
+
+
+
+Détails techniques (facultatif)
+
Pour des détails techniques sur les exploits que vous utiliserez sur cette page, voir ici.
+
+
+
+
Notes de compatibilité
+
+
Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions, and 11.17.0 in the EUR, JPN and USA regions.
+
+
Les instructions fournies ne s’appliquent qu’aux New 3DS, New 3DS XL et New 2DS XL. Please ensure that the console you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+
+
Ce dont vous avez besoin
+
+
+
The latest release of super-skaterhax (the release .zip file)
The latest release of Luma3DS (the Luma3DS .zip file)
+
+
+
Section I - Préparatifs
+
+
Dans cette section, vous copierez les fichiers nécessaires pour déclencher à la fois super-skaterhax et l’Homebrew Launcher.
+
+
+
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
+
+
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
+
+
+
Copy everything inside the folder for your console’s region (and also system version if the region is USA) in the super-skaterhax .zip to the root of your SD card
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Réinsérez votre carte SD dans votre console
+
Power on your console
+
+
+
+
+
Section II - super-skaterhax
+
+
Dans cette section, vous allez visiter la page web d’exploit du Navigateur Internet, qui lancera l’Homebrew Launcher.
+
+
Si vous ne l’avez pas déjà fait, assurez-vous d’avoir une connexion Internet fonctionnelle configurée sur votre console.
+
+
+
Sur le Menu HOME, appuyez simultanément sur les boutons (L) et (R) pour ouvrir l’appareil photo
+
+
Si vous ne pouvez pas ouvrir la caméra, ouvrez le Navigateur Internet et tapez manuellement l’URL (https://zoogie.github.io/web/super/ pour EUR/USA/JPN, https://zoogie.github.io/web/korea pour KOR)
+
+
+
Tap the QR code button and scan one of the following QR codes for your console’s region here
+
+
Si vous recevez un avertissement de certificat de sécurité, appuyez sur (A) pour autoriser la connexion
+
+
+
Appuyez sur le bouton (Select) pour ouvrir l’onglet signet
+
+
Si votre bouton (Select) ne répond pas, appuyez sur l’icône étoile en bas à gauche de l’écran
+
+
+
Appuyez sur “Ajouter cette page aux favoris”
+
Appuyez une fois sur (B) pour revenir au navigateur
+
Appuyez sur (Start) pour ouvrir le menu contextuel
+
+
Si votre bouton (Start) ne répond pas, appuyez sur le bouton avec 3 lignes en bas à droite de l’écran
+
+
+
Appuyez sur “Paramètres”
+
Appuyez sur “Effacer les cookies”
+
Appuyez sur (A) pour continuer
+
Appuyez sur (HOME) pour revenir au Menu HOME, puis appuyez immédiatement sur (A) pour relancer le navigateur
+
Appuyez sur le bouton “GO GO!” en haut de l’écran
+
+
Si des invites apparaissent, approuvez les tous
+
If your console freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+
If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
+
+
+
+
+
Section III - Installation de boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
+
+
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
+
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+
+
+
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
+
+
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
+
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
Le fichier SafeB9SInstaller.bin est absent ou mal placé. Téléchargez la dernière version de SafeB9SInstaller, extrayez-le et placez SafeB9SInstaller.bin à la racine de votre carte SD. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
+
+
SigHaxed FIRM was not installed! Check lower screen for more info.
Le site Web a déterminé que votre movable.sed ne peut pas être forcé. Assurez-vous que vous avez donné le bon ID0 au site Web. Si votre ID0 est correct, vous ne pourrez pas utiliser Seedminer et vous devrez utiliser une autre méthode.
-
Si vous possédez une New 3DS / New 3DS XL / New 2DS XL (comme indiqué par les quatre boutons gâchettes à l’arrière et le stick C à droite), vous pouvez suivre Homebrew Launcher (super-skaterhax). Sinon, vous devrez suivre une méthode qui nécessite des jeux ou du matériel supplémentaires.
+
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). Sinon, vous devrez suivre une méthode qui nécessite des jeux ou du matériel supplémentaires.
Il y a peut-être un problème avec votre fichier F00D43D5.bin (il peut être corrompu ou destiné à la mauvaise 3DS). Re-créez votre fichier F00D43D5.bin avec l’injecteur Bannerbomb3 Injector, en vous assurant d’utiliser le fichier movable.sed pour votre console.
-
Installation de boot9strap (USM)
+
Installing boot9strap (Fredtool-Inject)
-La mise à jour de la console en mode sans échec s'exécute correctement au lieu de donner l'erreur 003-1099
-
-
-
-
-
-Écran rouge après avoir sélectionné "Paramètres avancés"
-
-
Le fichier usm.bin est absent ou mal placé. Téléchargez la dernière version de unSAFE_MODE et placez usm.bin à la racine de votre carte SD. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
-
-
Il est également possible que la console ne lise pas votre carte SD. Assurez-vous qu’elle est bien insérée et formatée correctement.
-
-
-
-Failed to open SafeB9SInstaller.bin
-
-
Le fichier SafeB9SInstaller.bin est absent ou mal placé. Téléchargez la dernière version de SafeB9SInstaller, extrayez-le et placez SafeB9SInstaller.bin à la racine de votre carte SD. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
-
-
-
-Failed to mount the SD card!
-
-
Sauvegardez vos données et reformatez votre carte SD en FAT32 avec l’outil recommandé en fonction de votre système d’exploitation (Windows, macOS, Linux). MiniTool Partition Wizard et l’outil de formatage d’HP (HPUSBDisk) sont connus pour causer des problèmes avec les cartes SD des 3DS.
-
-
Si cela échoue, essayez d’utiliser une autre carte SD.
-
-
-
Installation de boot9strap (Fredtool)
-
-
-Erreur sur la page de l'injecteur de Fredtool
+Error on DSiHaxInjector page
Assurez-vous que votre movable.sed et votre sauvegarde de DSiWare proviennent de la même console. Une incohérence entraînera une erreur.
-
-Impossible de sélectionner "Haxxxxxxxxx!" car le menu multihax BB3 apparaît
-
-
Vous avez oublié de supprimer F00D43D5.bin de la carte SD. Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare sur votre carte SD et supprimez le fichier F00D43D5.bin.
-
-
"Haxxxxxxxxx!" n'apparaît pas
@@ -712,17 +667,11 @@ window.cookieconsent.initialise({
-Les paramètres de Connexions Nintendo DS s'exécutent normalement
+DSiWare launches normally
Haxxxxxxxxx! n’a pas été copié depuis votre carte SD vers la mémoire de votre console.
-
-Écran noir lors du lancement des paramètres de Connexions Nintendo DS
-
-
Votre application Connexions Nintendo DS est endommagée et vous aurez besoin d’un accès à l’Homebrew Launcher pour résoudre ce problème. Rejoignez Nintendo Homebrew sur Discord pour obtenir de l’aide.
-
-
La carte SD est grisée dans Flipnote
@@ -758,14 +707,14 @@ window.cookieconsent.initialise({
"Une erreur est survenue. Maintenez le bouton POWER enfoncé pour éteindre la console..." (écran noir avec texte)
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
+
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
@@ -777,7 +726,7 @@ window.cookieconsent.initialise({
"Le logiciel a été arrêté car une erreur est survenue. La console va redémarrer." (boîte de message blanche)
-
There is an issue with your otherapp.bin file. Download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
+
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Rejoignez Nintendo Homebrew sur Discord pour obtenir de l’aide.
-
-Failed to open SafeB9SInstaller.bin
-
-
Le fichier SafeB9SInstaller.bin est absent ou mal placé. Téléchargez la dernière version de SafeB9SInstaller, extrayez-le et placez SafeB9SInstaller.bin à la racine de votre carte SD. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
-
-
Failed to mount the SD card!
Sauvegardez vos données et reformatez votre carte SD en FAT32 avec l’outil recommandé en fonction de votre système d’exploitation (Windows, macOS, Linux). MiniTool Partition Wizard et l’outil de formatage d’HP (HPUSBDisk) sont connus pour causer des problèmes avec les cartes SD des 3DS.
@@ -887,12 +830,6 @@ window.cookieconsent.initialise({
-
-Failed to open SafeB9SInstaller.bin
-
-
Le fichier SafeB9SInstaller.bin est absent ou mal placé. Téléchargez la dernière version de SafeB9SInstaller, extrayez-le et placez SafeB9SInstaller.bin à la racine de votre carte SD. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
-
-
Plantage sur "Doing agbhax..."
Il y a peut-être un problème avec votre fichier arm11code.bin. Re-téléchargez la dernière version de universal-otherapp, placez le fichier à la racine de votre carte SD et renommez-le en arm11code.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
Si cela échoue, essayez d’utiliser une autre carte SD.
-
Homebrew Launcher (super-skaterhax)
+
Installing boot9strap (super-skaterhax)
"Une erreur est survenue. Veuillez sauvegarder les données de tout logiciel en cours d'utilisation et redémarrer la console."
diff --git a/fr_FR/uninstall-cfw.html b/fr_FR/uninstall-cfw.html
index a0113863d7..0bd39056ec 100644
--- a/fr_FR/uninstall-cfw.html
+++ b/fr_FR/uninstall-cfw.html
@@ -358,23 +358,23 @@ window.cookieconsent.initialise({
-
Töltsd fel a movable.sed fájlod a “Choose File” opcióval
Kattints a “Build and Download”-ra
@@ -556,7 +542,7 @@ window.cookieconsent.initialise({
Ez letölt egy exploit DSiWare-t F00D43D5.bin néven és egy payload adatfájlt bb3.bin néven egy zip mappán belül (DSIWARE_EXPLOIT.zip)
-
Másold át a bb3.bin fájlt a DSIWARE_EXPLOIT.zip-ből az SD kártya gyökerébe
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
Ezt a fájlt nem kell megnyitni, vagy kicsomagolni
@@ -581,33 +567,32 @@ window.cookieconsent.initialise({
-
II. rész - Fizikai gombok ellenőrzése
+
II. rész - BannerBomb3
-
Ebben a fejezetben tesztelni fogod azt, hogy egyáltalán eléred-e a SAFE_MODE funkcióját a konzolodnak. Ez meghatározza, hogy melyik metódust kell követned a következő oldalon.
-
-
Az SD kártyádnak be kell helyezve lennie a számítógépedbe, amíg ez az ellenőrzés folyik.
-
-
Ebben a fejezetben tesztelni fogod azt, hogy működnek-e a váll gombok a konzolodon. Ez meghatározza, hogy melyik metódust kell követned a következő oldalon.
+
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
Kapcsold be a konzolod
-
Mikor meglátod a Home menüt, nyomd meg az (Bal váll) és (Jobb váll) gombokat egyszerre
+
Lépj be a “System Settings”-be a konzolodon
+
Navigálj ide: Data Management -> DSiWare -> SD Card (kép)
-
A kamera applettnek kell megjelennie
+
A konzolodnak a BB3 multihax menüt kell mutatnia
+
+
+
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
+
+
A konzolodod automatikusan újra fog indulni
Kapcsold ki a konzolod
+
Helyezd az SD kártyád a számítógépbe
+
Navigálj a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare mappába az SD kártyán
+
Töröld ki a F00D43D5.bin fájlt a Nintendo DSiWare mappádból és a számítógépedről. Ez nem fog kelleni többet
-
Következő lépések: Válassz egy exploit-ot
-
-
Ha a kamera megjelent az előző szakaszban, a Safe Mode valószínűleg működik a konzolodon.
Ha a konzolod Luma 10.2.1 -et vagy újabbat futtat, 100% biztonságos a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával a konzolod elindítása közben.
Ha a konzolod régebbi Luma verziót futtat, frissítened kell a Luma-t mielőtt az eszközöd 11.17.0 verzióra frissíted.
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá.
-
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Egészen pontosan a New3DS-család konzolainak egy ingyenes szoftver metódust, míg az Old3DS-család konzolainak alternatív exploitokat kell használniuk, aminek külső hardver vagy szoftver függősége van.
+
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
@@ -535,7 +519,7 @@ window.cookieconsent.initialise({
A legújabb verziójú rendszeren vagyok. Feltörhetem a konzolomat külső hardver vagy előfeltételek nélkül?
-
A válasz a konzol típusától függően változik. Jelenleg a New 3DS / New 3DS XL / New 2DS XL moddolható a 11.17.0 verzión előfeltételek nélkül (pl. eShop címek, fizikai tételek), míg a 3DS / 3DS XL / 2DS további szoftvert vagy hardvert igényel.
+
A válasz a konzol típusától függően változik. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop címek, fizikai tételek), míg a 3DS / 3DS XL / 2DS további szoftvert vagy hardvert igényel.
Ha a konzolod Luma 10.2.1 -et vagy újabbat futtat, 100% biztonságos a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával a konzolod elindítása közben.
Ha a konzolod régebbi Luma verziót futtat, frissítened kell a Luma-t mielőtt az eszközöd 11.17.0 verzióra frissíted.
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá.
-
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Egészen pontosan a New3DS-család konzolainak egy ingyenes szoftver metódust, míg az Old3DS-család konzolainak alternatív exploitokat kell használniuk, aminek külső hardver vagy szoftver függősége van.
+
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
+
+
+
+
+
+
+
+Technikai részletek (opcionális)
+
A freakyhax egy exploit a Freakyforms Deluxe játékhoz, amit plutooo fedezett fel és készített. A 9.0.0-11.17.0 verziókon EUR, USA és JPN régiós konzolokon működik.
+
+
+
+
Ez a metódus működő 3DS kamerát igényel.
+
+
Amire szükséged lesz
+
+
+
Egy EUR/USA/JPN példánya a Freakyforms Deluxe-nak (eShop vagy cartridge)
The latest release of HBL otherapps (direct download)
+
+
+
Lépések
+
+
I. rész - Előkészületek
+
+
+
Kapcsold ki a konzolod
+
Helyezd az SD kártyád a számítógépbe
+
Másol minden fájlt és mappát a /build/<your console and region>/exploit/ mappájából a freakyhax .zip-nek az SD kártyád gyökerébe
+
+
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
+
+
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Ne add hozzá a .bin kiterjesztést, ha nem látod
+
+
+
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
+
+
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
+
+
+
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
+
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
+
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
+
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
+
+
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Tedd vissza az SD kártyád a konzoldba
+
Kapcsold be a konzolod
+
+
+
II. rész - freakyhax
+
+
+
Tedd vissza az SD kártyád a konzoldba
+
Kapcsold be a konzolod
+
Indítsd el a Freakyforms Deluxe-ot
+
A játék menüjében válaszd a Play -> Camera -> Load a QR code-t
+
Válaszd a QR kódot
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
III. rész - boot9strap telepítése
+
+
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
+
+
+
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+
+
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
+
+
+
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
+
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
+
+
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
+
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
+
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
+
+
+
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+
+
+
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
+
+
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
-
V. rész- A menuhax67 eltávolítása
+
Section IV - Removing menuhax67
Ebben a fejezetben elő fogod idézni a BannerBomb3 exploit-ot egy második alkalommal, így el tudod távolítani a menuhax67-et, amit telepítettél a II. részben. Ez újra lehetővé teszi a HOME menü normális használatát.
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
+
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
+
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
+
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
+
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
+
+
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
+
+
+
Copy uloader.3dsx to the /3ds/ folder on your SD card
+
Tedd vissza az SD kártyád a konzoldba
+
+
+
Section II - menuhax67
+
+
In this section you will use the menuhax67 exploit installed earlier to launch uloader, which will load SafeB9SInstaller.
+
+
+
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
+
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
+
+
Ha az exploit sikeres volt, a konzolodnak ezt követően be kell bootolnia a Homebrew Launcherbe
+
Launch uloader from the list of homebrew
+
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+
+
Ha a konzol lefagy vagy összeomlik, erőltetve kapcsold ki a konzolt és próbáld újra ezt a részt
+
+
+
+
+
III. rész - boot9strap telepítése
+
+
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
+
+
+
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+
+
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
+
+
+
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
+
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
+
+
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
+
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
+
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
+
+
+
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+
+
+
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
+
+
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
+
+
+
Section IV - Removing menuhax67
+
+
Ebben a fejezetben elő fogod idézni a BannerBomb3 exploit-ot egy második alkalommal, így el tudod távolítani a menuhax67-et, amit telepítettél a II. részben. Ez újra lehetővé teszi a HOME menü normális használatát.
+
+
+
Lépj be a “System Settings”-be a konzolodon
+
Navigálj ide: Data Management -> DSiWare -> SD Card (kép)
+
Használd a D-Pad-et a navigáláshoz, és nyomd meg az (A) gombot az “Uninstall *hax” kiválasztásához
+
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
+
+
+
+
+
+
+
+Technikai részletek (opcionális)
+
A Ninjhax2 egy exploit a “Cubic Ninja” játékhoz, amit smealum készített. Ez az oldal egy zoogie által frissített verzióját tartalmazza a ninjhax-nak ninjhax2-dx néven, ami támogatja a 11.17.0 verziót.
+
+
+
Ez a metódus működő 3DS kamerát igényel.
+
+
Etz a folyamat felülírja a Cubic Ninja mentés fájlt, ha rendelkezel ilyennel.
Ha a játék kilép a HOME menübe, az exploit sikeresen telepítésre került
+
+
+
Indítsd el a “Cubic Ninja”-t még egyszer
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
III. rész - boot9strap telepítése
+
+
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
+
+
+
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+
+
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
+
+
+
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
+
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
+
+
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
+
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
+
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
+
+
+
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+
+
+
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
+
+
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
Ez a metódusa Seedminer használatának további exploitolás céljából használja a movable.sed fájlt, hogy egy egyedi Pokémon Picross mentés fájlt írjon, ami felhasználható a Homebrew Launcher indítására.
+
+
+
Ennek a folyamatnak a során a Pokémon Picross mentése felülírásra kerül, ha rendelkezel ilyennel. Ha szeretnéd megőrizni a Pokémon Picross játék adatod, készítened kell egy mentést a 00000001.sav fájlról, mielőtt felülírnád.
+
+
Amire szükséged lesz
+
+
+
A “Pokémon Picross” játék telepítve az eszközödre
+
The latest release of HBL otherapps (direct download)
+
+
+
Lépések
+
+
I. rész - Előkészületek
+
+
Ebben a fejezetben fel fogod másolni a fájlokat, amik a Homebrew Launcher indításához szükségesek.
+
+
+
Kapcsold ki a konzolod
+
Helyezd az SD kártyád a számítógépbe
+
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
+
+
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
+
+
+
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
+
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
+
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Ne add hozzá a .bin kiterjesztést, ha nem látod
+
+
+
Másold át a movable.sed a számítógépedről az SD kártyád gyökerébe
+
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
+
+
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
+
+
+
+
II. rész - PicHaxx
+
+
Ebben a fejezetben létre fogsz hozni egy hackelt Pokémon Picross mentés fájlt, ami használatakor betölti a Homebrew Launcher-t a konzolodon.
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
III. rész - boot9strap telepítése
+
+
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
+
+
+
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+
+
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
+
+
+
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
+
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
+
+
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
+
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
+
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
+
+
+
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+
+
+
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
+
+
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
The latest release of HBL otherapps (direct download)
+
+
+
Lépések
+
+
I. rész - Előkészületek
+
+
+
Kapcsold ki a konzolod
+
Helyezd az SD kártyád a számítógépbe
+
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
+
+
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
+
+
+
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
+
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
+
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Ne add hozzá a .bin kiterjesztést, ha nem látod
+
+
+
Vidd át a régiódhoz kapcsolódó .wav fájlt a Release_sh2e .zip fájblól egy eszközre ami le tud játszani .wav fájlokat, például egy telefonra
+
Másold a régiódhoz kapcsolódó petitcom .icn-t az SD kártyád gyökerébe
+
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
+
+
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Tedd vissza az SD kártyád a konzoldba
+
Kapcsold be a konzolod
+
+
+
II. rész - smilehax
+
+
+
Indítsd el az SmileBASIC alkalmazást
+
+
Fogadd el a frissítést, ha felajánlja
+
+
+
Válaszd a “Publish/Download Projects” opciót
+
SVálaszd a “Download (Receive) using Public Key” opciót
+
Nyomd meg a “Yes” gombot
+
Add meg a “NJEQK3A4” publikus kulcsot a Public Key opció alatt a képernyőbillentyűzettel
+
Nyomd meg a “Yes” gombot a PMODEM141 letöltésének megerősítéséhez
+
Nyomj “OK”-t, utána “Back”-et, majd “Browse Projects”-t
+
Válaszd a PMODEM141-t, majd nyomd meg “Select File”-t
+
Válaszd a PMODEM141.PRG-t majd nyomj “OK”-t, azután “Yes”-t a végrehajtásához
+
Válaszd a RECEIVE FILE SIMPLEX-t
+
Készítsd elő az eszközt, amiről lejátszod a .wav fájlt
+
Tartsd a konzolt 30 cm távolságra a lejátszó hangszórójától és használj egy elfogadható (nem hangos) hangerőt a .wav fájl lejátszásához
+
Válaszd a 300BPS-t majd játszd le a .wav fájlt
+
Ha végzett nyomd meg a “Yes”-t majd az “OK”-t
+
Nyomd meg a START gombot
+
Válaszd a SH2E-xxx.TXT fájlt, majd nyomj “OK”-t, azután “Yes”-t a végrehajtásához
+
+
Ha vissza lettél dobva a menübe, akkor ellenőrizd, hogy a SmileBASIC lefrisebb verzióját használod-e
+
+
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
III. rész - boot9strap telepítése
+
+
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
+
+
+
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+
+
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
+
+
+
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
+
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
+
+
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
+
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
+
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
+
+
+
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+
+
+
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
+
+
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
+
+
+
+
+
+
+
+Technikai részletek (opcionális)
+
Ez a metódusa Seedminer használatának további exploitolás céljából használja a movable.sed fájlt, hogy egy egyedi Steel Diver: Sub Wars mentés fájlt írjon, ami felhasználható a Homebrew Launcher indítására.
+
+
+
Ez a folyamat felülírja a Steel Diver: Sub Wars mentés fájlt, ha rendelkezel ilyennel. Ha szeretnéd megőrizni a Steel Diver: Sub Wars játék adatod, készítened kell egy mentést a 00000001.sav fájlról, mielőtt felülírnád.
+
+
Amire szükséged lesz
+
+
+
A “Steel Diver: Sub Wars” játék telepítve az eszközödre
+
The latest release of HBL otherapps (direct download)
+
+
+
Lépések
+
+
I. rész - Előkészületek
+
+
Ebben a fejezetben fel fogod másolni a fájlokat, amik a Homebrew Launcher indításához szükségesek.
+
+
+
Kapcsold ki a konzolod
+
Helyezd az SD kártyád a számítógépbe
+
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
+
+
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
+
+
+
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
+
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
+
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
+
Másold át a steelhax mappát a Steelhax-release.zip`-ből az SD kártya gyökerébe
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Ne add hozzá a .bin kiterjesztést, ha nem látod
+
+
+
Másold át a movable.sed a számítógépedről az SD kártyád gyökerébe
+
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
+
+
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Tedd vissza az SD kártyád a konzoldba
+
Kapcsold be a konzolod
+
+
+
II. rész - Steelminer
+
+
Ebben a fejezetben létre fogsz hozni egy hackelt Steel Diver: Sub Wars mentés fájlt, ami használatakor betölti a Homebrew Launcher-t a konzolodon.
+
+
+
Indítsd el a “Steel Diver: Sub Wars”-t egyszer és válaszd a Mii-t a mentés fájl inicializálásához
+
+
Utasítsd el a játék frissítést, ha kérdezi
+
Ha már frissítetted a játékot, akkor a System Settings Data management menüjében töröld a frissítést
Navigálj a Nintendo 3DS -> <ID0> -> ` -> `title` -> `00040000` -> `<8-character-region>` -> `data` útvonalra az SD kártyán
+
+
EUR régió: 000d7e00
+
JPN régió: 000d7c00
+
USA régió: 000d7d00
+
+
+
Másold az épp letöltött 00000001.sav fájlt a data könyvtárba az SD kártyán
+
+
Írd felül a régi mentés fájlt, ha kérdezi
+
+
+
Tedd vissza az SD kártyád a konzoldba
+
Kapcsold be a konzolod
+
Indítsd el “Steel Diver: Sub Wars”-t
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
III. rész - boot9strap telepítése
+
+
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
+
+
+
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+
+
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
+
+
+
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
+
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
+
+
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
+
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
+
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
+
+
+
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+
+
+
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
+
+
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
+
+
+
+
+
+
+
+Technikai részletek (opcionális)
+
A technikai részletei az ezen az oldalon használt exploit-oknak itt találhatók.
+
+
+
+
Kompatibilitási megjegyzések
+
+
A super-skaterhax (ami a Homebrew Launcher indítására használt) kompatibilis a 11.16.0 verziós New modellekkel minden régióban és 11.17.0 verziós EUR, JPN, és USA régiós konzolokon.
+
+
A megadott lépések csak a New 3DS, New 3DS XL és New 2DS XL típusokra vonatkoznak. Mielőtt folytatnád, kérjük ellenőrizd, hogy a moddolandó konzolod New 3DS, New 3DS XL, vagy New 2DS XL.
+
+
Amire szükséged lesz
+
+
+
The latest release of super-skaterhax (the release .zip file)
Ebben a fejezetben fel fogod másolni a fájlokat, amik a super-skaterhax és a Homebrew Launcher triggereléshez szükségesek.
+
+
+
Kapcsold ki a konzolod
+
Helyezd az SD kártyád a számítógépbe
+
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
+
+
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
+
+
+
Másolj mindent át a konzolod régiójának megfelelő mappájából (és a rendszer verziónak megfelelően, ha a régió USA) a super-skaterhax .zip-nek az SD kártyád gyökerébe
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Tedd vissza az SD kártyád a konzoldba
+
Kapcsold be a konzolod
+
+
+
+
+
II. rész - super-skaterhax
+
+
Ebben a fejezetben meg fogod látogatni a browser exploit weboldalt, ami elindítja a Homebrew Launcher-t.
+
+
Ha még nem történt meg, biztosítsd, hogy legyen működő Internet kapcsolata a konzolodnak.
+
+
+
A HOME menüben nyomd meg a bal és jobb váll gombokat egyszerre, hogy megnyisd a kamerát
+
+
Ha nem tudod megnyitni a kamerát, nyisd meg az Internet Browser-t kézzel, és írd be az URL-t e helyett. (https://zoogie.github.io/web/super/ az EUR/USA/JPN régiókhoz, https://zoogie.github.io/web/korea a KOR régióhoz)
+
+
+
Nyomd meg a QR kód gombot és olvasd be a következő QR kódok egyikét, ami megfelel a konzol régiódnak, itt
+
+
Ha tanúsítvány figyelmeztetést kapsz, nyomd meg az (A) gombot a kapcsolat engedélyezéséhez
+
+
+
Nyomd meg a (Select) gombot a könyvjelző fül megnyitásához
+
+
Ha a (Select) gombod nem reagál, akkor érintsd meg a csillag ikont a bal alsó sarkában a képernyőnek
+
+
+
Éríntsd meg a “Bookmark this page” feliratot
+
Nyomd meg a (B) gombot egyszer, hogy visszatérj a böngészőhöz
+
Nyomd meg a (START) gombot, hogy megnyisd a helyérzékeny menüt
+
+
Ha a (Start) gombod nem reagál, akkor érintsd meg 3-vonal menüt a jobb alsó sarkában a képernyőnek
+
+
+
Érintsd meg a “Settings”-et
+
Érintsd meg a “Delete Cookies”-t
+
Nyomd meg az (A) gombot a folytatáshoz
+
Nyomj (Home) gombot a HOME Menübe visszatéréshez, majd nyomj azonnal egy (A)-t a böngésző ismételt elindításához
+
Válaszd a “GO GO!” gombot a felső képernyőn
+
+
Ha bármilyen kérdés előjön, fogadd el mind
+
Ha a konzolod lefagy egy sárga képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, és próbáld újra ezt a részt
+
Ha a konzolod lefagy egy piros képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, csináld újra a 3. lépést a II. részben, majd próbáld újra ezt a részt
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+
+
Ha a konzolod lefagy egy piros képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, csináld újra a 3. lépést a II. részben, majd próbáld újra ezt a részt
+
+
+
+
+
III. rész - boot9strap telepítése
+
+
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
+
+
+
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+
+
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
+
+
+
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
+
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
+
+
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
+
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
+
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
+
+
+
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+
+
+
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
+
+
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
Ha a konzolod Luma 10.2.1 -et vagy újabbat futtat, 100% biztonságos a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával a konzolod elindítása közben.
Ha a konzolod régebbi Luma verziót futtat, frissítened kell a Luma-t mielőtt az eszközöd 11.17.0 verzióra frissíted.
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá.
-
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Egészen pontosan a New3DS-család konzolainak egy ingyenes szoftver metódust, míg az Old3DS-család konzolainak alternatív exploitokat kell használniuk, aminek külső hardver vagy szoftver függősége van.
+
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
Ez a metódus a Pokémon Picross játékot használja, am egy free-to-play játék. A movable.sed használatával létrehozhatsz egy olyan mentést fájlt, ami hozzáférést ad a Homebrew Launcher-hez, am további exploitolásra kerül felhasználásra.
Ez a metódus a Steel Diver: Sub Wars játékot használja, am egy free-to-play játék. A movable.sed használatával létrehozhatsz egy olyan mentést fájlt, ami hozzáférést ad a Homebrew Launcher-hez, am további exploitolásra kerül felhasználásra.
A SafeB9SInstaller.bin fájl hiányzik, vagy rossz helyen van. Töltsd le a legutolsó kiadását az SafeB9SInstaller-nek csomagold ki és rakd az SD kártyád gyökerébe. Ne add hozzá a .bin kiterjesztést, ha nem látod.
+
+
SigHaxed FIRM was not installed! Tekintsd meg az alsó képernyőt részletekért.
A weboldal úgy találta, hogy a movable.sed-ed nem brute-force-olható. Ellenőrizd, hogy helyes ID0-t adtál-e meg a weboldalon. Ha az ID0-d helyes, akkor nem tudod használni a Seedminer-t és egy alternatív metódust kell használnod.
-
Ha a konzolod New 3DS / New 3DS XL / New 2DS XL (amit a 4 váll gomb hátul és a C-Stick jobb oldalon jelez), követheted a Homebrew Launcher (super-skaterhax) lépéseit. Egyébként egy olyan másik metódust kell használnod ami további játékokat és hardvert igényel.
+
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). Egyébként egy olyan másik metódust kell használnod ami további játékokat és hardvert igényel.
Probléma van az F00D43D5.bin fájloddal (hibás vagy másik 3DS-hez tartozik). Hozd létre újra az F00D43D5.bin fájlod a BannerBomb3 Injector segítségével, biztosítva azt, hogy a konzolod movable.sed fájlját használod hozzá.
-
Boot9strap telepítése (USM)
+
Installing boot9strap (Fredtool-Inject)
-A Safe Mode rendszer frissítés sikerül a 003-1099 hiba helyett
-
-
-
-
-
-Piros képernyő a "Detailed Setup" kiválasztását követően
-
-
A usm.bin fájl hiányzik, vagy rossz helyen van. Töltsd le a legutolsó kiadását az unSAFE_MODE-nek és rakd usm.bin fájlt az SD kártyád gyökerébe. Ne add hozzá a .bin kiterjesztést, ha nem látod.
-
-
Előfordulhat, hogy a konzolod nem olvassa az SD kártyád. Légy biztos abban, hogy megfelelően be van rakva és formázott.
-
-
-
-Failed to open SafeB9SInstaller.bin
-
-
A SafeB9SInstaller.bin fájl hiányzik, vagy rossz helyen van. Töltsd le a legutolsó kiadását az SafeB9SInstaller-nek csomagold ki és rakd az SD kártyád gyökerébe. Ne add hozzá a .bin kiterjesztést, ha nem látod.
-
-
-
-Failed to mount the SD card!
-
-
Mentsd az adataidat, majd formázd újra az SD kártyád FAT32 formátumra, az ajánlott alkalmazással az operációs rendszerednek megfelelően. (Windows, macOS, Linux). A MiniTool Partition Wizard-ról és a HP formázó eszközről (HPUSBDisk) ismert, hogy problémákat okoznak a 3DS SD kártyákkal.
-
-
Ha ez sikertelen, próbálkozz egy másik SD kártyával.
-
-
-
Boot9strap telepítése (Fredtool)
-
-
-Hiba a Fredtool Injector oldalon
+Error on DSiHaxInjector page
Biztosítsd, hogy a movable.sed és a DSiWare mentés ugyanarról a konzolról származik. Egy eltérés hibához vezet.
-
-Nem lehetséges a "Haxxxxxxxxx!" kiválasztása, mert a BB3 multihax menü jelenik meg
-
-
Elfelejtetted törölni az F00D43D5.bin az SD kártyáról. Navigálj a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare mappába az SD kártyán és töröld az F00D43D5.bin fájlt.
-
-
A "Haxxxxxxxxx!" nem jelenik meg
@@ -716,17 +671,11 @@ window.cookieconsent.initialise({
-DS Connection Settings normálisan indul
+DSiWare launches normally
A Haxxxxxxxxx! nem lett átmásolva az SD kártyádról a rendszer memóriába.
-
-Fekete képernyő a DS Connection Settings indításakor
-
-
A DS Connection Settings alkalmazásod sérült, és szükséged van Homebrew Launcher hozzáférésre, hogy javítsd ezt a problémát. Csatlakozz a Nintendo Homebrew-hoz a Discord-on segítségért.
-
-
Az SD kártya kiszürkített a Flipnote-ban
@@ -762,14 +711,14 @@ window.cookieconsent.initialise({
"An error has occurred. Hold down the POWER button to turn off the power..." (fekete képernyő szöveggel)
A 00000001.sav és/vagy otherapp.bin fájljaid rossz helyre lehettek rakva. Biztosítsd, hogy a 00000001.sav a Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data mappában legyen és az otherapp.bin pedig az SD kártyád gyökerében.
-
Ha a fájljaid jó helyen vannak, hozd létre újra a mentéseket a PicHaxx Save Tool használatával, majd rakd őket a Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data mappába. Ügyelj arra, hogy a fájl pontosan 00000001.sav nevű legyen és hogy a konzolod movable.sed-jét használd a létrehozáshoz. Töltsd le újra az otherapps.zip-et és rakd a konzolod SD kártyájára a releváns .bin fájlt, majd nevezd át otherapp.bin-re. Ne add hozzá a .bin kiterjesztést, ha nem látod.
+
Ha a fájljaid jó helyen vannak, hozd létre újra a mentéseket a PicHaxx Save Tool használatával, majd rakd őket a Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data mappába. Ügyelj arra, hogy a fájl pontosan 00000001.sav nevű legyen és hogy a konzolod movable.sed-jét használd a létrehozáshoz. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Ne add hozzá a .bin kiterjesztést, ha nem látod.
@@ -781,7 +730,7 @@ window.cookieconsent.initialise({
"An error has occurred, forcing the software to close..." (fehér üzenet doboz)
-
Probléma van az otherapp.bin fájloddal. Töltsd le az otherapps.zip-et és rakd a konzolod SD kártyájára a releváns .bin fájlt, majd nevezd át otherapp.bin-re. Ne add hozzá a .bin kiterjesztést, ha nem látod.
+
Probléma van az otherapp.bin fájloddal. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Ne add hozzá a .bin kiterjesztést, ha nem látod.
Rossz Soundhax fájlod van a konzolodhoz és a régiódhoz vagy az eszközöd nem kompatibilis a Soundhax-szal. Később, azt, hogy mit kell csinálnod, attól függ, hog milyen verzión van a 3DS-ed jelenleg. Csatlakozz a Nintendo Homebrew-hoz a Discord-on segítségért.
-
-Failed to open SafeB9SInstaller.bin
-
-
A SafeB9SInstaller.bin fájl hiányzik, vagy rossz helyen van. Töltsd le a legutolsó kiadását az SafeB9SInstaller-nek csomagold ki és rakd az SD kártyád gyökerébe. Ne add hozzá a .bin kiterjesztést, ha nem látod.
-
-
Failed to mount the SD card!
Mentsd az adataidat, majd formázd újra az SD kártyád FAT32 formátumra, az ajánlott alkalmazással az operációs rendszerednek megfelelően. (Windows, macOS, Linux). A MiniTool Partition Wizard-ról és a HP formázó eszközről (HPUSBDisk) ismert, hogy problémákat okoznak a 3DS SD kártyákkal.
@@ -891,12 +834,6 @@ window.cookieconsent.initialise({
-
-Failed to open SafeB9SInstaller.bin
-
-
A SafeB9SInstaller.bin fájl hiányzik, vagy rossz helyen van. Töltsd le a legutolsó kiadását az SafeB9SInstaller-nek csomagold ki és rakd az SD kártyád gyökerébe. Ne add hozzá a .bin kiterjesztést, ha nem látod.
-
-
Lefagyás a "Doing agbhax..." üzenetnél
Probléma lehet az arm11code.bin fájloddal. Töltsd le újra a legutolsó kiadását az [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)-nak és rakd a fájlt az SD kártyád gyökerébe, majd nevezd át arm11code.bin-re. Ne add hozzá a .bin` kiterjesztést, ha nem látod.
Ha ez sikertelen, próbálkozz egy másik SD kártyával.
-
Homebrew Launcher (super-skaterhax)
+
Installing boot9strap (super-skaterhax)
"An error has occurred. Please save your data in any software currently in use, then restart the system."
diff --git a/hu_HU/uninstall-cfw.html b/hu_HU/uninstall-cfw.html
index e895710b76..643952ccef 100644
--- a/hu_HU/uninstall-cfw.html
+++ b/hu_HU/uninstall-cfw.html
@@ -358,23 +358,23 @@ window.cookieconsent.initialise({
-
Copia il file Launcher.dat dalla cartella per il modello e la regione della tua console all’interno dell’archivio Release .zip nella directory principale della tua scheda SD
Carica il tuo file movable.sed scegliendo l’opzione “Choose File”
Seleziona “Build and Download”
@@ -553,7 +540,7 @@ window.cookieconsent.initialise({
Verrà scaricato un exploit DSiWare chiamato F00D43D5.bin e un payload chiamato bb3.bin all’interno di un archivio zip (DSIWARE_EXPLOIT.zip)
-
Copia il file bb3.bin da DSIWARE_EXPLOIT.zip nella directory principale della tua scheda SD
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
Questo file non ha bisogno di essere aperto o estratto
@@ -578,9 +565,32 @@ window.cookieconsent.initialise({
+
Sezione II - BannerBomb3
+
+
In questa sezione attiverai l’exploit BannerBomb3 utilizzando il menu Gestione Nintendo DSiWare con il quale installerai l’exploit menuhax67.
+
+
+
Accendi la tua console
+
Avvia le Impostazioni di sistema sulla tua console
+
Entra in Gestione dati -> DSiWare -> Scheda SD (image)
+
+
La tua console dovrebbe mostrare il menu BB3 multihax
+
+
+
Usa il D-Pad per spostarti sul menu “Install *hax”, quindi premi il pulsante (A)
+
+
La tua console si riavvierà automaticamente
+
+
+
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
+
Elimina il file F0D43D5.bin dalla cartella Nintendo DSiWare e dal tuo computer. Questo file non sarà più necessario
Copia il file Launcher.dat dalla cartella per il modello e la regione della tua console all’interno dell’archivio Release .zip nella directory principale della tua scheda SD
Carica il tuo file movable.sed scegliendo l’opzione “Choose File”
Seleziona “Build and Download”
@@ -556,7 +542,7 @@ window.cookieconsent.initialise({
Verrà scaricato un exploit DSiWare chiamato F00D43D5.bin e un payload chiamato bb3.bin all’interno di un archivio zip (DSIWARE_EXPLOIT.zip)
-
Copia il file bb3.bin da DSIWARE_EXPLOIT.zip nella directory principale della tua scheda SD
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
Questo file non ha bisogno di essere aperto o estratto
@@ -581,33 +567,32 @@ window.cookieconsent.initialise({
-
Sezione II - Verifica Pulsanti Hardware
+
Sezione II - BannerBomb3
-
In questa sezione controllerai se la tua console può accedere alla Modalità Provvisoria. Serve per determinare quale metodo seguirai nella prossima pagina.
-
-
La tua scheda SD dovrebbe rimanere nel tuo computer mentre effettui questo controllo.
-
-
In questa sezione verificherai se i pulsanti dorsali della tua console funzionano. Serve per determinare quale metodo seguirai nella prossima pagina.
+
In questa sezione attiverai l’exploit BannerBomb3 utilizzando il menu Gestione Nintendo DSiWare con il quale installerai l’exploit menuhax67.
Accendi la tua console
-
Nel menu HOME premi contemporaneamente i pulsanti L e R
+
Avvia le Impostazioni di sistema sulla tua console
+
Entra in Gestione dati -> DSiWare -> Scheda SD (image)
-
L’applicazione fotocamera dovrebbe apparire
+
La tua console dovrebbe mostrare il menu BB3 multihax
+
+
+
Usa il D-Pad per spostarti sul menu “Install *hax”, quindi premi il pulsante (A)
+
+
La tua console si riavvierà automaticamente
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
+
Elimina il file F0D43D5.bin dalla cartella Nintendo DSiWare e dal tuo computer. Questo file non sarà più necessario
-
Passaggi successivi: Scelta di un exploit
-
-
Se è apparsa la fotocamera nella sezione precedente, la tua console ha la Modalità Provvisoria probabilmente funzionante.
Se la tua console sta eseguendo Luma 10.2.1 o più recente, è al 100% sicuro aggiornare. Puoi controllare la versione di Luma tenendo premuto (Select) durante l’avvio della console.
Se la tua console ha una versione precedente di Luma, dovresti aggiornarla prima di aggiornare la tua console alla versione 11.17.0.
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda.
-
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Nello specifico, tutte le console della famiglia New3DS hanno un metodo con software gratuito, mentre i modelli della famiglia Old3DS dovranno usare exploit alternativi che si basano su hardware o software esterni.
+
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
@@ -535,7 +519,7 @@ window.cookieconsent.initialise({
Ho installato l'ultima versione di sistema. Posso modificare la mia console senza hardware esterno o altro?
-
Dipende dal modello della tua console. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. titoli eShop, oggetti fisici), mentre i 3DS / 3DS XL / 2DS richiedono software o hardware aggiuntivo.
Se la tua console sta eseguendo Luma 10.2.1 o più recente, è al 100% sicuro aggiornare. Puoi controllare la versione di Luma tenendo premuto (Select) durante l’avvio della console.
Se la tua console ha una versione precedente di Luma, dovresti aggiornarla prima di aggiornare la tua console alla versione 11.17.0.
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda.
-
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Nello specifico, tutte le console della famiglia New3DS hanno un metodo con software gratuito, mentre i modelli della famiglia Old3DS dovranno usare exploit alternativi che si basano su hardware o software esterni.
+
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
Se hai gradito questa guida, accettiamo Donazioni.
+
+
+
+
+
+
+
+Dettagli Tecnici (opzionale)
+
freakyhax è un exploit per il gioco Freakyforms Deluxe scoperto e rilasciato da plutooo. Funziona sulle versioni da 9.0.0 a 11.17.0 su console EUR, USA e JPN.
+
+
+
+
Questo metodo richiede una fotocamera 3DS funzionante.
+
+
Cosa serve
+
+
+
Una copia EUR/USA/JPN di Freakyforms Deluxe (da eShop o scheda di gioco)
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
+
The latest release of HBL otherapps (direct download)
+
+
+
Istruzioni
+
+
Sezione I - Preparazione
+
+
+
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
Copia tutti i file e le cartelle all’interno della cartella /build/<la tua console e regione>/exploit/ dall’archivio .zip di freakyhax nella directory principale della tua scheda SD
+
+
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+
+
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Non aggiungere l’estensione .bin se non la vedi presente
+
+
+
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+
+
+
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
+
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
+
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
+
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
+
+
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinserisci la scheda SD nella tua console
+
Accendi la tua console
+
+
+
Sezione II - freakyhax
+
+
+
Reinserisci la scheda SD nella tua console
+
Accendi la tua console
+
Avvia Freakyforms Deluxe
+
Nel menu di gioco, seleziona Play -> Camera -> Load a QR code
+
Seleziona il codice QR
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Sezione III - Installazione di boot9strap
+
+
In questa sezione installerai il custom firmware sulla tua console.
+
+
+
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
+
+
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
+
+
+
Una volta completato tutto, premi (A) per riavviare la console
+
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
+
+
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
+
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
+
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
+
Premi (Start) per salvare e riavviare il 3DS
+
+
+
A questo punto, la console avvierà sempre Luma3DS.
+
+
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
+
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Usiamo BannerBomb3 per installare menuhax67, che ci permette di accedere all’Homebrew Launcher. Da qui, eseguiremo uloader per avviare SafeB9SInstaller.
+
Usiamo BannerBomb3 per installare menuhax67, che ci permette di accedere all’Homebrew Launcher. From there, we launch nimdsphax which launches SafeB9SInstaller.
-
Leggi qui per informazioni su uloader e qui per informazioni su menuhax67.
+
See here for information about nimdsphax and here for information about menuhax67.
-
Dovresti essere arrivato a questa pagina solo se esegui la versione 11.15.0 o 11.14.0. Se hai una versione del software maggiore di 11.15.0, uloader fallirà.
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Copia il file bb3.bin dall’archivio Release .zip nella directory principale della tua scheda SD, sovrascrivendo il file esistente
-
Copia il file Launcher.dat dalla cartella per il modello e la regione della tua console all’interno dell’archivio Release .zip nella directory principale della tua scheda SD
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
-
Copia il file uloader.3dsx nella cartella /3ds/ della tua scheda SD
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
Reinserisci la scheda SD nella tua console
-
Sezione II - BannerBomb3
+
Section II - menuhax67
-
In questa sezione attiverai l’exploit BannerBomb3 utilizzando il menu Gestione Nintendo DSiWare con il quale installerai l’exploit menuhax67.
-
-
-
Accendi la tua console
-
Avvia le Impostazioni di sistema sulla tua console
-
Entra in Gestione dati -> DSiWare -> Scheda SD (image)
-
-
La tua console dovrebbe mostrare il menu BB3 multihax
-
-
-
Usa il D-Pad per spostarti sul menu “Install *hax”, quindi premi il pulsante (A)
-
-
La tua console si riavvierà automaticamente
-
-
-
-
-
Sezione III - menuhax67
-
-
In questa sezione utilizzerai l’exploit menuhax67 appena installato per avviare uloader, che caricherà SafeB9SInstaller.
+
In this section you will use the menuhax67 exploit installed earlier to launch nimdsphax, which will load SafeB9SInstaller.
Clicca sull’icona di impostazioni del menu HOME nell’angolo in alto a sinistra dello schermo inferiore ()
@@ -593,15 +552,15 @@ window.cookieconsent.initialise({
Se l’exploit ha avuto successo, la tua console avrà avviato l’Homebrew Launcher
-
Avvia uloader dalla lista degli homebrew disponibili
+
Launch nimdsphax from the list of homebrew
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
-
Se la console si blocca o crasha, forza lo spegnimento della console, quindi ritenta questa sezione
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
Sezione IV - Installazione di boot9strap
+
Sezione III - Installazione di boot9strap
In questa sezione installerai il custom firmware sulla tua console.
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
-
Sezione V - Rimozione di menuhax67
+
Section IV - Removing menuhax67
In questa sezione avvierai l’exploit BannerBomb3 una seconda volta per poter disinstallare l’exploit menuhax67 che hai installato nella Sezione II. Questo renderà nuovamente possibile utilizzare normalmente le impostazioni del menu HOME.
Se hai gradito questa guida, accettiamo Donazioni.
+
+
+
+
+
+
+
+Dettagli Tecnici (opzionale)
+
+
Usiamo BannerBomb3 per installare menuhax67, che ci permette di accedere all’Homebrew Launcher. Da qui, eseguiremo uloader per avviare SafeB9SInstaller.
+
+
Leggi qui per informazioni su uloader e qui per informazioni su menuhax67.
+
+
+
+
Dovresti essere arrivato a questa pagina solo se esegui la versione 11.15.0 o 11.14.0. Se hai una versione del software maggiore di 11.15.0, uloader fallirà.
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
+
+
+
Sezione I - Preparazione
+
+
+
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
+
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
+
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
+
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
+
+
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
+
+
+
Copia il file uloader.3dsx nella cartella /3ds/ della tua scheda SD
+
Reinserisci la scheda SD nella tua console
+
+
+
Section II - menuhax67
+
+
In questa sezione utilizzerai l’exploit menuhax67 appena installato per avviare uloader, che caricherà SafeB9SInstaller.
+
+
+
Clicca sull’icona di impostazioni del menu HOME nell’angolo in alto a sinistra dello schermo inferiore ()
+
+
Se la console si blocca per un po’ e poi crasha, assicurati di avere il file Launcher.dat nella directory principale della tua scheda SD
+
+
+
Se l’exploit ha avuto successo, la tua console avrà avviato l’Homebrew Launcher
+
Avvia uloader dalla lista degli homebrew disponibili
+
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
+
+
Se la console si blocca o crasha, forza lo spegnimento della console, quindi ritenta questa sezione
+
+
+
+
+
Sezione III - Installazione di boot9strap
+
+
In questa sezione installerai il custom firmware sulla tua console.
+
+
+
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
+
+
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
+
+
+
Una volta completato tutto, premi (A) per riavviare la console
+
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
+
+
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
+
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
+
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
+
Premi (Start) per salvare e riavviare il 3DS
+
+
+
A questo punto, la console avvierà sempre Luma3DS.
+
+
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
+
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
+
+
+
Section IV - Removing menuhax67
+
+
In questa sezione avvierai l’exploit BannerBomb3 una seconda volta per poter disinstallare l’exploit menuhax67 che hai installato nella Sezione II. Questo renderà nuovamente possibile utilizzare normalmente le impostazioni del menu HOME.
+
+
+
Avvia le Impostazioni di sistema sulla tua console
+
Entra in Gestione dati -> DSiWare -> Scheda SD (image)
+
Usa il D-Pad per spostarti sul menu “Uninstall *hax”, quindi premi il pulsante (A)
+
Se hai gradito questa guida, accettiamo Donazioni.
+
+
+
+
+
+
+
+Dettagli Tecnici (opzionale)
+
Ninjhax2 è un exploit per il gioco “Cubic Ninja” realizzato da smealum. Questa pagina utilizza una versione aggiornata di ninjhax di zoogie chiamata ninjhax2-dx, che supporta la versione 11.17.0.
+
+
+
Questo metodo richiede una fotocamera 3DS funzionante.
+
+
Questo processo sovrascriverà il tuo file di salvataggio per Cubic Ninja, se ne hai uno.
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
+
+
+
Istruzioni
+
+
Sezione I - Preparazione
+
+
+
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
Copia il file Launcher.dat dalla cartella appropriata per la console dall’archivio .zip di ninjhax2-dx nella directory principale della tua scheda SD
+
+
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+
+
+
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
+
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
+
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
+
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
+
+
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinserisci la scheda SD nella tua console
+
Accendi la tua console
+
+
+
Sezione II - ninjhax2-dx
+
+
+
Lancia “Cubic Ninja” la prima volta e seleziona “Crea”
+
Seleziona la regione e l’hardware della tua console
+
Sulla tua console, scansiona il codice QR
+
+
Se il gioco esce al menu HOME, l’exploit è stato installato correttamente
+
+
+
Avvia nuovamente “Cubic Ninja”
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Sezione III - Installazione di boot9strap
+
+
In questa sezione installerai il custom firmware sulla tua console.
+
+
+
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
+
+
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
+
+
+
Una volta completato tutto, premi (A) per riavviare la console
+
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
+
+
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
+
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
+
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
+
Premi (Start) per salvare e riavviare il 3DS
+
+
+
A questo punto, la console avvierà sempre Luma3DS.
+
+
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
+
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Questo metodo usa Seedminer per servirsi ulteriormente del tuo file movable.sed e scrivere un file di salvataggio personalizzato per Pokémon Picross, che può essere utilizzato per avviare l’Homebrew Launcher.
+
+
+
Questo processo sovrascriverà il tuo file di salvataggio per Pokémon Picross, se ne hai uno. Se desideri conservare i tuoi dati di gioco Pokémon Picross, dovresti fare un backup del tuo file 00000001.sav prima di sovrascriverlo.
+
+
Cosa serve
+
+
+
Il gioco “Pokémon Picross” installato sulla tua console
+
+
Se lo hai già scaricato in passato, puoi riscaricarlo
+
La scheda SD deve essere inserita nella console per poter installare Pokémon Picross
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
+
The latest release of HBL otherapps (direct download)
+
+
+
Istruzioni
+
+
Sezione I - Preparazione
+
+
In questa sezione copierai alcuni dei file che verranno utilizzati per avviare l’Homebrew Launcher.
+
+
+
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+
+
+
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
+
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
+
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Non aggiungere l’estensione .bin se non la vedi presente
+
+
+
Copia il file movable.sed dal tuo computer nella directory principale della tua scheda SD
+
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
+
+
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
+
+
+
+
Sezione II - PicHaxx
+
+
In questa sezione creerai un file di salvataggio modificato per Pokémon Picross che, una volta caricato, avvierà l’Homebrew Launcher nella tua console.
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Sezione III - Installazione di boot9strap
+
+
In questa sezione installerai il custom firmware sulla tua console.
+
+
+
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
+
+
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
+
+
+
Una volta completato tutto, premi (A) per riavviare la console
+
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
+
+
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
+
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
+
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
+
Premi (Start) per salvare e riavviare il 3DS
+
+
+
A questo punto, la console avvierà sempre Luma3DS.
+
+
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
+
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se hai gradito questa guida, accettiamo Donazioni.
+
+
+
+
+
+
+
Questa guida non supporta la versione Giapponese di SmileBASIC.
+
+
+Dettagli Tecnici (opzionale)
+
smilehax-IIe è un exploit per il gioco “SmileBASIC” realizzato da zoogie, compatibile con le versioni di sistema da 9.0.0 a 11.17.0 per le console USA/EUR/JPN.
+
+
+
Cosa serve
+
+
Il gioco “SmileBASIC” installato sulla tua console
+
+
Se lo hai già scaricato in passato, puoi riscaricarlo
+
La scheda SD deve essere inserita nella console per poter installare SmileBASIC
+
+
+
L’ultima versione di smilehax-IIe (download diretto)
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
+
The latest release of HBL otherapps (direct download)
+
+
+
Istruzioni
+
+
Sezione I - Preparazione
+
+
+
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+
+
+
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
+
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
+
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Non aggiungere l’estensione .bin se non la vedi presente
+
+
+
Trasferisci il file .wav per la tua regione dall’archivio .zip di Release_sh2e a un dispositivo in grado di riprodurre i file .wav, ad esempio un telefono
+
Copia il file petitcom .icn per la tua regione nella directory principale della tua scheda SD
+
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
+
+
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinserisci la scheda SD nella tua console
+
Accendi la tua console
+
+
+
Sezione II - smilehax
+
+
+
Avvia SmileBASIC
+
+
Aggiorna il gioco se richiesto
+
+
+
Seleziona l’opzione “Publish/Download Projects”
+
Seleziona l’opzione “Download (Receive) using Public Key”
+
Premi il pulsante “Yes”
+
Inserisci la Public Key “NJEQK3A4” usando la tastiera a schermo
+
Premi il pulsante “Sì” per confermare il download di PMODEM141
+
Premi “OK”, poi “Back”, poi “Browse Projects”
+
Seleziona PMODEM141, quindi premi “Select File”
+
Seleziona PMODEM141.PRG, premi “OK”, quindi “Yes” per eseguirlo
+
Seleziona RECEIVE FILE SIMPLEX
+
Prepara il dispositivo per riprodurre il file .wav
+
Mantieni la tua console a 30cm dall’altoparlante del dispositivo che usi per riprodurre il file .wav e usa un volume ragionevole (non alto) per riprodurlo
+
Ora seleziona 300BPS, quindi riproduci il file .wav
+
Al termine, premi “Yes”, quindi premi “OK”
+
Premi il tasto START
+
Seleziona il file SH2E-xxx.TXT, premi OK, quindi “YES” per eseguirlo
+
+
Se ritorni al menu, assicurati di usare l’ultima versione di SmileBASIC
+
+
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Sezione III - Installazione di boot9strap
+
+
In questa sezione installerai il custom firmware sulla tua console.
+
+
+
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
+
+
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
+
+
+
Una volta completato tutto, premi (A) per riavviare la console
+
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
+
+
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
+
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
+
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
+
Premi (Start) per salvare e riavviare il 3DS
+
+
+
A questo punto, la console avvierà sempre Luma3DS.
+
+
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
+
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se hai gradito questa guida, accettiamo Donazioni.
+
+
+
+
+
+
+
+Dettagli Tecnici (opzionale)
+
Questo metodo usa Seedminer per servirsi ulteriormente del tuo file movable.sed e scrivere un file di salvataggio personalizzato per Steel Diver: Sub Wars, che può essere utilizzato per avviare l’Homebrew Launcher.
+
+
+
Questo processo sovrascriverà il tuo file di salvataggio per Steel Diver: Sub Wars, se ne hai uno. Se desideri conservare i tuoi dati di gioco Steel Diver: Sub Wars, dovresti fare un backup del tuo file 00000001.sav prima di sovrascriverlo.
+
+
Cosa serve
+
+
+
Il gioco “Steel Diver: Sub Wars” installato sulla tua console
+
+
Se lo hai già scaricato in passato, puoi riscaricarlo
+
La scheda SD deve essere inserita nella console per poter installare Steel Diver: Sub Wars
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
+
The latest release of HBL otherapps (direct download)
+
+
+
Istruzioni
+
+
Sezione I - Preparazione
+
+
In questa sezione copierai alcuni dei file che verranno utilizzati per avviare l’Homebrew Launcher.
+
+
+
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+
+
+
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
+
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
+
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
+
Copia la cartella steelhax presente nell’archivio Steelhax-release.zip nella directory principale della tua scheda SD
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Non aggiungere l’estensione .bin se non la vedi presente
+
+
+
Copia il file movable.sed dal tuo computer nella directory principale della tua scheda SD
+
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
+
+
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinserisci la scheda SD nella tua console
+
Accendi la tua console
+
+
+
Sezione II - Steelminer
+
+
In questa sezione creerai un file di salvataggio modificato per Steel Diver: Sub Wars che, una volta utilizzato, caricherà l’Homebrew Launcher nella tua console.
+
+
+
Avvia “Steel Diver: Sub Wars” e seleziona un Mii per inizializzare il salvataggio
+
+
Rifiuta l’aggiornamento di gioco quando richiesto
+
Se hai già aggiornato il gioco, rimuovi l’aggiornamento tramite il menu Gestione dati nelle Impostazioni della console
Nella tua scheda SD, entra nella cartella Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> <ID di 8 caratteri della regione> -> data
+
+
Regione EUR: 000d7e00
+
Regione JPN: 000d7c00
+
Regione USA: 000d7d00
+
+
+
Copia il file 00000001.sav appena scaricato nella cartella data della tua scheda SD
+
+
Sovrascrivi il salvataggio precedente quando richiesto
+
+
+
Reinserisci la scheda SD nella tua console
+
Accendi la tua console
+
Avvia “Steel Diver: Sub Wars”
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Sezione III - Installazione di boot9strap
+
+
In questa sezione installerai il custom firmware sulla tua console.
+
+
+
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
+
+
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
+
+
+
Una volta completato tutto, premi (A) per riavviare la console
+
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
+
+
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
+
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
+
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
+
Premi (Start) per salvare e riavviare il 3DS
+
+
+
A questo punto, la console avvierà sempre Luma3DS.
+
+
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
+
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se hai gradito questa guida, accettiamo Donazioni.
+
+
+
+
+
+
+
+Dettagli Tecnici (opzionale)
+
Per i dettagli tecnici sugli exploit che utilizzerai in questa pagina, vedi qui.
+
+
+
+
Note di Compatibilità
+
+
Super-skaterhax (quando utilizzato per avviare l’Homebrew Launcher) è compatibile con i modelli New alla versione 11.16.0 di tutte le regioni, e 11.17.0 per le regioni EUR, JPN e USA.
+
+
Le istruzioni indicate si applicano solo a New 3DS, New 3DS XL e New 2DS XL. Assicurati che la console che stai modificando sia un New 3DS, New 3DS XL, o un New 2DS XL prima di continuare.
+
+
Cosa serve
+
+
+
The latest release of super-skaterhax (the release .zip file)
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
+
+
+
Sezione I - Preparazione
+
+
In questa sezione copierai i file necessari per attivare sia super-skaterhax che l’Homebrew Launcher.
+
+
+
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+
+
+
Copia tutto il contenuto della cartella per la regione della tua console (e anche della versione di sistema in caso di USA) dell’archivio .zip di super-skaterhax nella directory principale della tua scheda SD
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinserisci la scheda SD nella tua console
+
Accendi la tua console
+
+
+
+
+
Sezione II - super-skaterhax
+
+
In questa sezione visiterai la pagina web dell’exploit del browser, che avvierà l’Homebrew Launcher.
+
+
Se non l’hai già fatto, assicurati di avere una connessione Internet funzionante configurata sulla tua console.
+
+
+
Nel menu HOME, premi contemporaneamente i pulsanti dorsali L e R per avviare la fotocamera
+
+
Se non riesci ad aprire la fotocamera, apri il browser Internet e digita manualmente l’URL (https://zoogie.github.io/web/super/ per EUR/USA/JPN, https://zoogie.github.io/web/korea per KOR)
+
+
+
Tocca il pulsante “codice QR” e scansiona uno dei seguenti codici QR per la regione della tua console qui
+
+
Se visualizzi un avviso riguardo un certificato di sicurezza, premi (A) per consentire la connessione
+
+
+
Premi il pulsante (Select) per aprire la pagina dei segnalibri
+
+
Se il pulsante (Select) non funziona, tocca l’icona della stella nell’angolo in basso a sinistra dello schermo
+
+
+
Tocca “Aggiungi ai preferiti”
+
Premi (B) una volta per ritornare al browser
+
Premi (Start) per aprire il menu contestuale
+
+
Se il pulsante (Start) non funziona, tocca il pulsante con 3 linee nell’angolo in basso a destra dello schermo
+
+
+
Tocca su “Impostazioni”
+
Tocca su “Elimina cookie”
+
Premi il pulsante (A) per continuare
+
Premi (Home) per tornare al menu HOME e premi subito (A) per avviare nuovamente il browser
+
Seleziona il pulsante “GO GO!” nella schermata superiore
+
+
Se vengono visualizzate delle richieste, approvale tutte
+
Se la tua console si blocca con una schermata gialla, tieni premuto il pulsante POWER finché non si spegne, quindi riprova questa sezione
+
Se la tua console si blocca con una schermata rossa, tieni premuto il pulsante POWER finché non si spegne, riprova il passo 3 della Sezione II, quindi riprova questa sezione
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
+
+
Se la tua console si blocca con una schermata rossa, tieni premuto il pulsante POWER finché non si spegne, riprova il passo 3 della Sezione II, quindi riprova questa sezione
+
+
+
+
+
Sezione III - Installazione di boot9strap
+
+
In questa sezione installerai il custom firmware sulla tua console.
+
+
+
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
+
+
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
+
+
+
Una volta completato tutto, premi (A) per riavviare la console
+
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
+
+
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
+
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
+
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
+
Premi (Start) per salvare e riavviare il 3DS
+
+
+
A questo punto, la console avvierà sempre Luma3DS.
+
+
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
+
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se la tua console sta eseguendo Luma 10.2.1 o più recente, è al 100% sicuro aggiornare. Puoi controllare la versione di Luma tenendo premuto (Select) durante l’avvio della console.
Se la tua console ha una versione precedente di Luma, dovresti aggiornarla prima di aggiornare la tua console alla versione 11.17.0.
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda.
-
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Nello specifico, tutte le console della famiglia New3DS hanno un metodo con software gratuito, mentre i modelli della famiglia Old3DS dovranno usare exploit alternativi che si basano su hardware o software esterni.
+
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
Questo metodo utilizza il gioco Pokémon Picross, un gioco che era gratuito. Utilizzando il file movable.sed puoi creare un file di salvataggio modificato che ti darà accesso all’Homebrew Launcher, che verrà usato per exploit successivi.
Questo metodo utilizza il gioco Steel Diver: Sub Wars, un gioco che era gratuito. Utilizzando il file movable.sed puoi creare un file di salvataggio modificato che ti darà accesso all’Homebrew Launcher, che verrà usato per exploit successivi.
Il file SafeB9SInstaller.bin è mancante o mal posizionato. Scarica l’ultima versione di SafeB9SInstaller, estraila e posiziona il file ‘SafeB9SInstaller.bin’ della directory principale della tua scheda SD. Non aggiungere l’estensione .bin se non la vedi presente.
+
+
SigHaxed FIRM was not installed! Check lower screen for more info.
Il sito ha stabilito che il tuo file movable.sed non può essere decriptato. Assicurati di aver dato l’ID0 corretto al sito web. Se il tuo ID0 è corretto, allora non potrai utilizzare Seedminer e dovrai utilizzare un metodo alternativo.
-
Se hai un New 3DS / New 3DS XL / New 2DS XL (riconoscibili dai quattro pulsanti dorsali e dal C-Stick sulla destra), puoi seguire Homebrew Launcher (super-skaterhax). Altrimenti, dovrai seguire un metodo che richiede ulteriori giochi o dispositivi.
+
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). Altrimenti, dovrai seguire un metodo che richiede ulteriori giochi o dispositivi.
Potrebbe esserci un problema con il tuo file F00D43D5.bin (potrebbe essere corrotto o per un diverso 3DS). Ri-crea il tuo file F00D43D5.bin con Bannerbomb3 Injector, assicurandoti di utilizzare il file movable.sed della tua console.
-
Installazione di boot9strap (USM)
+
Installing boot9strap (Fredtool-Inject)
-L'aggiornamento del sistema in Modalità Provvisoria completa con successo invece di dare l'errore 003-1099
-
-
-
-
-
-Schermata rossa dopo aver selezionato "Impostazioni avanzate"
-
-
Il file usm.bin è mancante o mal posizionato. Scarica l’ultima versione di unSAFE_MODE e posiziona il file usm.bin nella directory principale della tua scheda SD. Non aggiungere l’estensione .bin se non la vedi presente.
-
-
C’è anche la possibilità che la console non riesca a leggere la tua scheda SD. Assicurati che sia inserita e formattata correttamente.
Il file SafeB9SInstaller.bin è mancante o mal posizionato. Scarica l’ultima versione di SafeB9SInstaller, estraila e posiziona il file ‘SafeB9SInstaller.bin’ della directory principale della tua scheda SD. Non aggiungere l’estensione .bin se non la vedi presente.
-
-
-
-Impossibile montare la scheda SD!
-
-
Effettua il backup dei tuoi dati e riformatta la tua scheda SD come FAT32 con lo strumento consigliato a seconda del sistema operativo (Windows, macOS, Linux). MiniTool Partition Wizard e lo strumento di formattazione HP (HPUSBDisk) sono noti per causare problemi con schede SD 3DS.
-
-
Se il problema non si risolve, prova ad usare un’altra scheda SD.
-
-
-
Installazione di boot9strap (Fredtool)
-
-
-Errore nella pagina di Fredtool Injector
+Error on DSiHaxInjector page
Assicurati che il file movable.sed e il backup DSiWare provengano dalla stessa console. La mancata corrispondenza comporterà un errore.
-
-Impossibile selezionare "Haxxxxxxxxx!" perché appare il menu multihax BB3
-
-
Hai dimenticato di eliminare F00D43D5.bin dalla scheda SD. Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare ed elimina il file F00D43D5.bin.
-
-
"Haxxxxxxxxx!" non appare
@@ -712,17 +667,11 @@ window.cookieconsent.initialise({
-Le Impostazioni di collegamento DS si avviano normalmente
+DSiWare launches normally
Haxxxxxxxxx! non è stato copiato dalla tua scheda SD nella memoria di sistema.
-
-Schermata nera avviando le Impostazioni di collegamento DS
-
-
La tua applicazione Impostazioni di collegamento DS è corrotta, e avrai bisogno di accedere all’Homebrew Launcher per risolvere questo problema. Entra nel canale Discord di Nintendo Homebrew per chiedere assistenza.
-
-
La scheda SD è grigia in Flipnote
@@ -758,14 +707,14 @@ window.cookieconsent.initialise({
"Si è verificato un errore. Tieni premuto il pulsante POWER per spegnere la console..." (schermo nero con testo)
I tuoi file 00000001.sav e/o otherapp.bin potrebbero essere mal posizionati. Assicurati che il file 00000001.sav sia in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data e che il file otherapp.bin sia nella directory principale della tua scheda SD.
-
Se i tuoi file sono nelle posizioni corrette, ricrea il salvataggio usando PicHaxx Save Tool, poi posizionalo in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Assicurati che il file sia chiamato esattamente 00000001.sav e che tu abbia usato il file movable.sed della tua console per crearlo. Scarica nuovamente otherapps.zip, posiziona il file .bin relativo alla tua console nella directory principale della tua scheda SD e rinominalo in otherapp.bin. Non aggiungere l’estensione .bin se non la vedi presente.
+
Se i tuoi file sono nelle posizioni corrette, ricrea il salvataggio usando PicHaxx Save Tool, poi posizionalo in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Assicurati che il file sia chiamato esattamente 00000001.sav e che tu abbia usato il file movable.sed della tua console per crearlo. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Non aggiungere l’estensione .bin se non la vedi presente.
@@ -777,7 +726,7 @@ window.cookieconsent.initialise({
"Si è verificato un errore che ha provocato la chiusura del software..." (messaggio su riquadro bianco)
-
C’è un problema con il tuo file otherapp.bin. Scarica otherapps.zip, posiziona il file .bin relativo alla tua console nella directory principale della tua scheda SD e rinominalo in otherapp.bin. Non aggiungere l’estensione .bin se non la vedi presente.
+
C’è un problema con il tuo file otherapp.bin. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Non aggiungere l’estensione .bin se non la vedi presente.
Hai il file Soundhax sbagliato per la tua console e regione, o la tua console è incompatibile con Soundhax. In quest’ultimo caso, dovrai scoprire la versione presente sul tuo 3DS. Entra nel canale Discord di Nintendo Homebrew per chiedere assistenza.
-
-Impossibile aprire SafeB9SInstaller.bin
-
-
Il file SafeB9SInstaller.bin è mancante o mal posizionato. Scarica l’ultima versione di SafeB9SInstaller, estraila e posiziona il file ‘SafeB9SInstaller.bin’ della directory principale della tua scheda SD. Non aggiungere l’estensione .bin se non la vedi presente.
-
-
Impossibile montare la scheda SD!
Effettua il backup dei tuoi dati e riformatta la tua scheda SD come FAT32 con lo strumento consigliato a seconda del sistema operativo (Windows, macOS, Linux). MiniTool Partition Wizard e lo strumento di formattazione HP (HPUSBDisk) sono noti per causare problemi con schede SD 3DS.
Il file SafeB9SInstaller.bin è mancante o mal posizionato. Scarica l’ultima versione di SafeB9SInstaller, estraila e posiziona il file ‘SafeB9SInstaller.bin’ della directory principale della tua scheda SD. Non aggiungere l’estensione .bin se non la vedi presente.
-
-
Bloccato su "Doing agbhax..."
Potrebbe esserci un problema con il tuo file arm11code.bin. Riscarica l’ultima versione di universal-otherapp, posizionala nella directory principale della tua scheda SD e rinominalo in arm11code.bin. Non aggiungere l'estensione .bin` se non la vedi presente.
Se il problema non si risolve, prova ad usare un’altra scheda SD.
-
Homebrew Launcher (super-skaterhax)
+
Installing boot9strap (super-skaterhax)
"Si è verificato un errore. Salva i dati di qualunque applicazione attualmente in uso, quindi riavvia la console."
diff --git a/it_IT/uninstall-cfw.html b/it_IT/uninstall-cfw.html
index 5a85e5aa47..44ff150a68 100644
--- a/it_IT/uninstall-cfw.html
+++ b/it_IT/uninstall-cfw.html
@@ -358,23 +358,23 @@ window.cookieconsent.initialise({
-
This section will reset your system settings to its defaults. Installed games and their save data will not be affected. This is required to prevent known issues relating to extended memory mode and applets on some consoles.
-
콘솔을 종료해 주세요
+
콘솔의 전원을 꺼 주세요
(Start) 를 길게 누르고, 이 상태에서 콘솔의 전원을 켜 주세요. GodMode9이 실행될 겁니다
만약 콘솔이 Luma 10.2.1 이상일 경우, 업데이트해도 100% 안전합니다. 콘솔을 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다.
만약 콘솔이 오래된 Luma를 사용하고 있다면, 콘솔을 11.17.0으로 업데이트하기 전에 CFW 복구 / 업데이트를 해야 합니다.
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요.
-
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
@@ -535,7 +519,7 @@ window.cookieconsent.initialise({
제 콘솔은 최신 버전입니다, 외부 하드웨어나 전제 조건 없이 내 콘솔을 해킹할 수 있습니까?
-
본체 모델에 따라 다릅니다. 현재 New 3DS, New 3DS XL, New 2DS XL은 11.17.0 버전에서 별도의 준비물(e숍 타이틀, 물리적인 장비) 없이 수정이 가능합니다. 하지만 3DS, 3DS XL, 2DS의 경우 추가적인 소프트웨어 혹은 장비가 필요합니다.
+
본체 모델에 따라 다릅니다. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. 하지만 3DS, 3DS XL, 2DS의 경우 추가적인 소프트웨어 혹은 장비가 필요합니다.
여기서 기기의 안전을 위해 커스텀 펌웨어가 설치되어 있는지 확인합니다. If custom firmware is not installed by this point for any reason, the next section may render your console unable to be hacked without external hardware.
-
콘솔을 종료해 주세요
+
콘솔의 전원을 꺼 주세요
(Select) 버튼을 길게 눌러 주세요
(Select) 버튼을 계속 눌러 있는 상태에서 콘솔의 전원을 켜 주세요
If the check was successful, your console should have booted into the Luma3DS configuration menu
Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions, and 11.17.0 in the EUR, JPN and USA regions.
+
(Homebrew Launcher를 실행하기 위해 활용되는) super-skaterhax는 모든 지역에서의 11.16.0 버전과 EUR, JPN, USA 지역의 11.17.0 버전(해당 버전은 여기에 언급된 지역에만 배포되었습니다)에 호환됩니다.
-
The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. 해킹되는 콘솔이 New 3DS, New 3DS XL, 또는 New 2DS XL이 맞는지 확인 하고 진행하시길 바랍니다.
+
여기에서 제공하는 방법은 New 3DS, New 3DS XL, New 2DS XL에만 적용됩니다. 해킹되는 콘솔이 New 3DS, New 3DS XL, 또는 New 2DS XL이 맞는지 확인 하고 진행하시길 바랍니다.
이 섹션에서 super-skaterhax하고 Homebrew Launcher를 실행할 파일을 복사합니다.
-
콘솔을 종료해 주세요
+
콘솔의 전원을 꺼 주세요
SD 카드를 컴퓨터에 삽입해 주세요
Luma3DS .zip안에 있는 boot.firm과 boot.3dsx를 SD 카드의 루트에 복사해 주세요
SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다
-
Copy everything inside the folder for your console’s region (and also system version if the region is USA) in the super-skaterhax .zip to the root of your SD card
+
super-skaterhax .zip에서 콘솔의 지역(EUR, JPN, USA의 경우 버전까지)이 일치하는 폴더의 내용물을 SD 카드의 루트에 모두 복사하세요
SD 카드를 콘솔에 다시 삽입해 주세요
-
콘솔을 시작해 주세요
+
콘솔의 전원을 켜 주세요
섹션 II - super-skaterhax
-
In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
이 섹션에서는, 브라우저 취약점을 이용하는 웹사이트에 접속해 Homebrew Launcher를 실행합니다.
아직 안하셨다면, 콘솔을 인터넷에 연결해 주세요.
HOME 메뉴에서 L, R 버튼을 동시에 눌러 카메라를 열어 주세요
-
If you are unable to open the camera, open the Internet Browser and manually type the URL instead (https://zoogie.github.io/web/super/ for EUR/USA/JPN, https://zoogie.github.io/web/korea for KOR)
+
카메라를 열 수 없다면, 인터넷 브라우저를 열어 URL을 직접 입력해주세요 (EUR/USA/JPN의 경우 https://zoogie.github.io/web/super/, KOR의 경우 https://zoogie.github.io/web/korea).
-
Tap the QR code button and scan one of the following QR codes for your console’s region here
+
만약 콘솔이 Luma 10.2.1 이상일 경우, 업데이트해도 100% 안전합니다. 콘솔을 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다.
만약 콘솔이 오래된 Luma를 사용하고 있다면, 콘솔을 11.17.0으로 업데이트하기 전에 CFW 복구 / 업데이트를 해야 합니다.
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요.
-
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
The latest release of HBL otherapps (direct download)
+
+
+
진행 방법
+
+
섹션 I - 준비 작업
+
+
+
콘솔의 전원을 꺼 주세요
+
SD 카드를 컴퓨터에 삽입해 주세요
+
freakyhax .zip에서 /build/<콘솔 지역과 버전>/exploit/ 폴더 안의 모든 파일과 폴더를 SD 카드의 루트로 복사해 주세요
+
+
SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다
+
+
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
.bin 확장자는 보이지 않는 이상 추가하지 말아 주세요
+
+
+
Luma3DS .zip안에 있는 boot.firm과 boot.3dsx를 SD 카드의 루트에 복사해 주세요
+
+
SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다
+
+
+
SD 카드이 루트에 boot9strap 라는 이름으로 새 폴더를 생성해 주세요
+
SD 카드에 있는 /boot9strap/ 폴더에 boot9strap .zip 파일 안에 압축되있는 boot9strap.firm과 boot9strap.firm.sha을 복사해 주세요
+
SafeB9SInstaller .zip의 SafeB9SInstaller.bin을 SD 카드의 루트로 복사해 주세요
+
SD 카드의 루트에 3ds 폴더가 없을 경우 폴더를 만들어 주세요
+
+
이 폴더에는 홈브류 에플리케이션과 데이터가 보관되어 있으며, 콘솔이 자동으로 생성하는 Nintendo 3DS 폴더와 다른 폴더입니다
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
SD 카드를 콘솔에 다시 삽입해 주세요
+
콘솔의 전원을 켜 주세요
+
+
+
섹션 II - freakyhax
+
+
+
SD 카드를 콘솔에 다시 삽입해 주세요
+
콘솔의 전원을 켜 주세요
+
Freakyforms Deluxe를 실행해 주세요
+
게임 메뉴에서 Play -> Camera -> Load a QR code를 선택해 주세요
+
QR 코드를 선택해 주세요
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
섹션 III - boot9strap 설치하기
+
+
이 섹션에서는, 커스텀 펌웨어를 설치할 것입니다.
+
+
+
메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요
+
+
아래 화면의 단계가 붉은 텍스트로 표시되고 키 콤보 입력을 요구하지 않는다면, 이 문제 해결 가이드를 참고해 주세요
+
+
+
작업이 완료되면, (A) 를 눌려 콘솔을 재부팅해 주세요
+
콘솔은 Luma3DS 구성 메뉴로 부팅되었을 겁니다
+
+
Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다
+
일단 이 가이드에서는 모든 설정을 기본으로 남겨 두세요 (켜기 또는 끄기를 누르지 마세요)
+
만약 콘솔이 부팅시에 꺼진다면 Luma3DS .zip 파일 안에 압축 되있는 boot.firm을 SD 카드의 루트로 복사 했는지 확인해 주세요
+
+
+
(Start)를 눌러 저장하고 기기를 다시 시작해 주세요
+
+
+
이제 기기는 Luma3DS를 기본으로 부팅 됩니다.
+
+
Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다.
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
Luma3DS .zip안에 있는 boot.firm과 boot.3dsx를 SD 카드의 루트에 복사해 주세요
+
SD 카드이 루트에 boot9strap 라는 이름으로 새 폴더를 생성해 주세요
+
SD 카드에 있는 /boot9strap/ 폴더에 boot9strap .zip 파일 안에 압축되있는 boot9strap.firm과 boot9strap.firm.sha을 복사해 주세요
+
SafeB9SInstaller .zip의 SafeB9SInstaller.bin을 SD 카드의 루트로 복사해 주세요
+
SD 카드의 루트에 3ds 폴더가 없을 경우 폴더를 만들어 주세요
+
+
이 폴더에는 홈브류 에플리케이션과 데이터가 보관되어 있으며, 콘솔이 자동으로 생성하는 Nintendo 3DS 폴더와 다른 폴더입니다
+
+
+
uloader.3dsx 파일을 SD 카드의 /3ds/ 폴더에 복사해 주세요
+
SD 카드를 콘솔에 다시 삽입해 주세요
+
+
+
Section II - menuhax67
+
+
In this section you will use the menuhax67 exploit installed earlier to launch uloader, which will load SafeB9SInstaller.
+
+
+
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
+
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
+
+
익스플로잇이 성공적이었다면 Homebrew Launcher로 부팅되었을 것입니다
+
홈브류 목록에서 uloader를 실행해 주세요
+
익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
+
+
콘솔이 멈추거나 다운되면, 강제로 전원을 끄고, 이 섹션을 다시 실행해 주세요
+
+
+
+
+
섹션 III - boot9strap 설치하기
+
+
이 섹션에서는, 커스텀 펌웨어를 설치할 것입니다.
+
+
+
메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요
+
+
아래 화면의 단계가 붉은 텍스트로 표시되고 키 콤보 입력을 요구하지 않는다면, 이 문제 해결 가이드를 참고해 주세요
+
+
+
작업이 완료되면, (A) 를 눌려 콘솔을 재부팅해 주세요
+
콘솔은 Luma3DS 구성 메뉴로 부팅되었을 겁니다
+
+
Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다
+
일단 이 가이드에서는 모든 설정을 기본으로 남겨 두세요 (켜기 또는 끄기를 누르지 마세요)
+
만약 콘솔이 부팅시에 꺼진다면 Luma3DS .zip 파일 안에 압축 되있는 boot.firm을 SD 카드의 루트로 복사 했는지 확인해 주세요
+
+
+
(Start)를 눌러 저장하고 기기를 다시 시작해 주세요
+
+
+
이제 기기는 Luma3DS를 기본으로 부팅 됩니다.
+
+
Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다.
+
다음 페이지에서는 커펌에 유용한 홈브류를 설치해 기기 준비를 완료할 것 입니다.
+
+
+
Section IV - Removing menuhax67
+
+
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
The latest release of HBL otherapps (direct download)
+
+
+
진행 방법
+
+
섹션 I - 준비 작업
+
+
이 섹션에서는, Homebrew Launcher를 실행할 파일들을 복사합니다.
+
+
+
콘솔의 전원을 꺼 주세요
+
SD 카드를 컴퓨터에 삽입해 주세요
+
Luma3DS .zip안에 있는 boot.firm과 boot.3dsx를 SD 카드의 루트에 복사해 주세요
+
+
SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다
+
+
+
SD 카드이 루트에 boot9strap 라는 이름으로 새 폴더를 생성해 주세요
+
SD 카드에 있는 /boot9strap/ 폴더에 boot9strap .zip 파일 안에 압축되있는 boot9strap.firm과 boot9strap.firm.sha을 복사해 주세요
+
SafeB9SInstaller .zip의 SafeB9SInstaller.bin을 SD 카드의 루트로 복사해 주세요
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
.bin 확장자는 보이지 않는 이상 추가하지 말아 주세요
+
+
+
‘movable.sed’ 파일을 SD 카드의 루트에 복사해 주세요
+
SD 카드의 루트에 3ds 폴더가 없을 경우 폴더를 만들어 주세요
+
+
이 폴더에는 홈브류 에플리케이션과 데이터가 보관되어 있으며, 콘솔이 자동으로 생성하는 Nintendo 3DS 폴더와 다른 폴더입니다
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
+
+
+
+
섹션 II - PicHaxx
+
+
이 섹션에서는, 포켓몬 피크로스의 해킹된 저장 파일을 생성하고, 이걸 사용해서 Homebrew Launcher를 실행합니다.
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
The latest release of HBL otherapps (direct download)
+
+
+
진행 방법
+
+
섹션 I - 준비 작업
+
+
+
콘솔의 전원을 꺼 주세요
+
SD 카드를 컴퓨터에 삽입해 주세요
+
Luma3DS .zip안에 있는 boot.firm과 boot.3dsx를 SD 카드의 루트에 복사해 주세요
+
+
SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다
+
+
+
SD 카드이 루트에 boot9strap 라는 이름으로 새 폴더를 생성해 주세요
+
SD 카드에 있는 /boot9strap/ 폴더에 boot9strap .zip 파일 안에 압축되있는 boot9strap.firm과 boot9strap.firm.sha을 복사해 주세요
+
SafeB9SInstaller .zip의 SafeB9SInstaller.bin을 SD 카드의 루트로 복사해 주세요
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
.bin 확장자는 보이지 않는 이상 추가하지 말아 주세요
+
+
+
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
+
콘솔의 지역에 해당한 petitcom .icn 파일을 SD 카드의 루트에 복사해 주세요
+
SD 카드의 루트에 3ds 폴더가 없을 경우 폴더를 만들어 주세요
+
+
이 폴더에는 홈브류 에플리케이션과 데이터가 보관되어 있으며, 콘솔이 자동으로 생성하는 Nintendo 3DS 폴더와 다른 폴더입니다
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
SD 카드를 콘솔에 다시 삽입해 주세요
+
콘솔의 전원을 켜 주세요
+
+
+
섹션 II - smilehax
+
+
+
SmileBASIC을 실행해 주세요
+
+
메세지가 표시되면 게임을 업데이트해 주세요
+
+
+
“Publish/Download Projects” 를 선택해 주세요
+
Select the “Download (Receive) using Public Key” option
+
“Yes” 버튼을 눌러 주세요
+
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
+
Press the “Yes” button to confirm the download of PMODEM141
+
Press “OK”, then “Back”, then “Browse Projects”
+
Select PMODEM141, then press “Select File”
+
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
+
Select RECEIVE FILE SIMPLEX
+
Prepare the device you use to play the .wav file
+
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
+
Now select 300BPS, then play the .wav file
+
When it finishes, press “Yes”, then press “OK”
+
START 버튼을 눌러 주세요
+
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
+
+
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
+
+
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
섹션 III - boot9strap 설치하기
+
+
이 섹션에서는, 커스텀 펌웨어를 설치할 것입니다.
+
+
+
메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요
+
+
아래 화면의 단계가 붉은 텍스트로 표시되고 키 콤보 입력을 요구하지 않는다면, 이 문제 해결 가이드를 참고해 주세요
+
+
+
작업이 완료되면, (A) 를 눌려 콘솔을 재부팅해 주세요
+
콘솔은 Luma3DS 구성 메뉴로 부팅되었을 겁니다
+
+
Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다
+
일단 이 가이드에서는 모든 설정을 기본으로 남겨 두세요 (켜기 또는 끄기를 누르지 마세요)
+
만약 콘솔이 부팅시에 꺼진다면 Luma3DS .zip 파일 안에 압축 되있는 boot.firm을 SD 카드의 루트로 복사 했는지 확인해 주세요
+
+
+
(Start)를 눌러 저장하고 기기를 다시 시작해 주세요
+
+
+
이제 기기는 Luma3DS를 기본으로 부팅 됩니다.
+
+
Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다.
The latest release of HBL otherapps (direct download)
+
+
+
진행 방법
+
+
섹션 I - 준비 작업
+
+
이 섹션에서는, Homebrew Launcher를 실행할 파일들을 복사합니다.
+
+
+
콘솔의 전원을 꺼 주세요
+
SD 카드를 컴퓨터에 삽입해 주세요
+
Luma3DS .zip안에 있는 boot.firm과 boot.3dsx를 SD 카드의 루트에 복사해 주세요
+
+
SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다
+
+
+
SD 카드이 루트에 boot9strap 라는 이름으로 새 폴더를 생성해 주세요
+
SD 카드에 있는 /boot9strap/ 폴더에 boot9strap .zip 파일 안에 압축되있는 boot9strap.firm과 boot9strap.firm.sha을 복사해 주세요
+
SafeB9SInstaller .zip의 SafeB9SInstaller.bin을 SD 카드의 루트로 복사해 주세요
+
Steelhax-release.zip 안에 있는 steelhax 폴더를 SD 카드의 루트에 복사해 주세요
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
.bin 확장자는 보이지 않는 이상 추가하지 말아 주세요
+
+
+
‘movable.sed’ 파일을 SD 카드의 루트에 복사해 주세요
+
SD 카드의 루트에 3ds 폴더가 없을 경우 폴더를 만들어 주세요
+
+
이 폴더에는 홈브류 에플리케이션과 데이터가 보관되어 있으며, 콘솔이 자동으로 생성하는 Nintendo 3DS 폴더와 다른 폴더입니다
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
SD 카드를 콘솔에 다시 삽입해 주세요
+
콘솔의 전원을 켜 주세요
+
+
+
섹션 II - Steelminer
+
+
이 섹션에서는, Steel Diver: Sub Wars의 해킹된 저장 파일을 생성하고, 이걸 사용해서 Homebrew Launcher를 실행합니다.
+
+
+
Launch “Steel Diver: Sub Wars” once and select a Mii to initialize your save file
+
+
Decline the game update when prompted
+
If you have already updated the game, use the Data Management menu of the System Settings to delete the update
만약 콘솔이 Luma 10.2.1 이상일 경우, 업데이트해도 100% 안전합니다. 콘솔을 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다.
만약 콘솔이 오래된 Luma를 사용하고 있다면, 콘솔을 11.17.0으로 업데이트하기 전에 CFW 복구 / 업데이트를 해야 합니다.
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요.
-
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
This section will reset your system settings to its defaults. Installed games and their save data will not be affected. This is required to prevent known issues relating to extended memory mode and applets on some consoles.
-
콘솔을 종료해 주세요
+
콘솔의 전원을 꺼 주세요
(Start) 를 길게 누르고, 이 상태에서 콘솔의 전원을 켜 주세요. GodMode9이 실행될 겁니다
Select a Mii Character that was created on this console, NOT imported from another console (make a new one first if you don’t have any), and press “OK”
-
콘솔을 종료해 주세요
+
콘솔의 전원을 꺼 주세요
SD 카드를 컴퓨터에 삽입해 주세요
SD 카드의 Nintendo 3DS 폴더를 열어 주세요
Nintendo 3DS 폴더 안에 있는 32자리 폴더 이름을 복사해 주세요
diff --git a/ko_KR/seedminer-(twn).html b/ko_KR/seedminer-(twn).html
index baffb87af6..1a70d31fee 100644
--- a/ko_KR/seedminer-(twn).html
+++ b/ko_KR/seedminer-(twn).html
@@ -358,23 +358,23 @@ window.cookieconsent.initialise({
-
SafeB9SInstaller.bin 파일이 없거나 잘못 들어갔습니다. 최신 버전의 SafeB9Installer을 다운받아 압축을 풀고, SD 카드의 최상위 디렉토리에 SafeB9Installer.bin을 복사해주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
+
+
SigHaxed FIRM was not installed! Check lower screen for more info.
Nintendo 3DS 폴더를 BACKUP_Nintendo 3DS 폴더로 이름을 변경해 주세요
SD 카드를 콘솔에 다시 삽입해 주세요
-
콘솔을 시작해 주세요
+
콘솔의 전원을 켜 주세요
콘솔이 SD 카드 데이터를 생성할 때까지 기다려 주세요
당신의 앱들이 사라졌을 것입니다. 이는 정상이며, 잠시 후에 고쳐질 것입니다.
-
콘솔을 종료해 주세요
+
콘솔의 전원을 꺼 주세요
SD 카드를 컴퓨터에 삽입해 주세요
SD 카드의 Nintendo 3DS 폴더를 열어 주세요
Nintendo 3DS 폴더 내 32글자의 폴더 이름을 복사해 주세요
@@ -623,7 +614,7 @@ window.cookieconsent.initialise({
웹사이트에서 movable.sed 파일을 해킹할 수 없다고 확정했습니다. 정확한 ID0를 제공했는지 확인해주세요. 만약 ID0가 정확하다면, Seedminer를 통한 방법은 불가능하며 다른 방법을 이용해야 합니다.
-
만약 New 3DS / New 3DS XL / New 2DS XL (뒤에 4개의 어깨 버튼과 함께 오른쪽에 C-스틱이 달린 것들) 을 가지고 계시다면, Homebrew Launcher (super-skaterhax) 방법을 따라해볼 수 있습니다. 그 외에는 추가 하드웨어가 필요한 방법을 시도해야 할 수 있습니다.
+
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). 그 외에는 추가 하드웨어가 필요한 방법을 시도해야 할 수 있습니다.
usm.bin 파일이 없거나 잘못 들어갔습니다. 최신 버전의 unSAFE_MODE을 다시 내려받고 usm.bin 파일을 SD 카드의 최상위 디렉토리에 복사해주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
-
-
또는, 콘솔이 SD 카드를 인식 못 했을 가능성도 있습니다. 장착이 되있고 제대로 포맷이 되었다는걸 확인해 주세요.
-
-
-
-Failed to open SafeB9SInstaller.bin
-
-
SafeB9SInstaller.bin 파일이 없거나 잘못 들어갔습니다. 최신 버전의 SafeB9Installer을 다운받아 압축을 풀고, SD 카드의 최상위 디렉토리에 SafeB9Installer.bin을 복사해주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
-
-
-
-Failed to mount the SD card!
-
-
데이터를 모두 백업하고 시스템별로 권장되는 프로그램을 이용해 SD카드를 FAT32로 다시 포맷해 주세요. (Windows, macOS, Linux) MiniTool Partition Wizard나 HP formatting tool(HPUSBDisk)는 3DS용 SD 카드에 문제를 발생시킨다는 것이 알려져 있습니다.
-
-
만약 해결되지 않는다면, 다른 SD 카드를 이용해 보세요.
-
-
-
boot9strap 설치 (Fredtool)
-
-
-Fredtool Injector 페이지에서 오류가 발생합니다
+Error on DSiHaxInjector page
movable.sed와 DSiWare 백업 파일이 동일 기기에서 추출한 것인지 확인해 주세요. 서로 다르면 오류가 발생합니다.
-
-BB3 multihax 메뉴가 표시돼 "Haxxxxxxxxx!"를 선택할 수 없습니다
-
-
F00D43D5.bin 파일을 삭제하지 않았습니다. SD 카드의 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 폴더로 이동하고 F00D43D5.bin 파일을 삭제해 주세요.
에러가 발생했습니다. 본체의 전원 버튼을 길게 눌러 전원을 끈 후..." (검은 화면에 텍스트)
00000001.sav 또는 otherapp.bin 파일이 잘못 들어갔습니다. 00000000.sav가 Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00004000 -> 0017c100 -> data 안에 있고 otherapp.bin`이 SD 카드 루트에 있는지 다시 한 번 확인해 주세요.
-
만약 위치가 정확하다면, PicHaxx Save Tool을 이용해 세이브를 다시 생성한 후, Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data 폴더 안에 다시 복사해 주세요. 반드시 파일의 이름이 00000001.sav이고 기기의 movable.sed를 이용해야 합니다. otherapps.zip를 다운로드하고, 콘솔에 맞는 .bin 파일를 SD 카드의 루트로 복사하고, 이 파일을 otherapp.bin으로 이름을 바꿔 주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
+
만약 위치가 정확하다면, PicHaxx Save Tool을 이용해 세이브를 다시 생성한 후, Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data 폴더 안에 다시 복사해 주세요. 반드시 파일의 이름이 00000001.sav이고 기기의 movable.sed를 이용해야 합니다. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
@@ -777,7 +726,7 @@ window.cookieconsent.initialise({
"에러가 발생하여 소프트웨어를 종료합니다..." (하얀 메시지 창)
-
otherapp.bin 파일에 문제가 있습니다. otherapps.zip를 다운로드하고, 콘솔에 맞는 .bin 파일를 SD 카드의 루트로 복사하고, 이 파일을 otherapp.bin으로 이름을 바꿔 주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
+
otherapp.bin 파일에 문제가 있습니다. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
콘솔과 지역 조합과 다른 Soundhax 파일을 이용하고 있거나, 콘솔이 Soundhax와 호환되지 않습니다. In the latter case, your course of action will determine on what version your 3DS is currently on. Nintendo Homebrew Discord 서버에 오셔서 도움을 요청하세요.
-
-Failed to open SafeB9SInstaller.bin
-
-
SafeB9SInstaller.bin 파일이 없거나 잘못 들어갔습니다. 최신 버전의 SafeB9Installer을 다운받아 압축을 풀고, SD 카드의 최상위 디렉토리에 SafeB9Installer.bin을 복사해주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
-
-
Failed to mount the SD card!
데이터를 모두 백업하고 시스템별로 권장되는 프로그램을 이용해 SD카드를 FAT32로 다시 포맷해 주세요. (Windows, macOS, Linux) MiniTool Partition Wizard나 HP formatting tool(HPUSBDisk)는 3DS용 SD 카드에 문제를 발생시킨다는 것이 알려져 있습니다.
@@ -887,12 +830,6 @@ window.cookieconsent.initialise({
-
-Failed to open SafeB9SInstaller.bin
-
-
SafeB9SInstaller.bin 파일이 없거나 잘못 들어갔습니다. 최신 버전의 SafeB9Installer을 다운받아 압축을 풀고, SD 카드의 최상위 디렉토리에 SafeB9Installer.bin을 복사해주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
-
-
"Doing agbhax..."에서 멈춥니다
arm11code.bin에 문제가 있을 수 있습니다. 최신 버전의 universal-otherapp을 다시 내려받아 SD 카드의 최상위 디렉토리에 복사하고, 이름을 arm11code.bin으로 변경해주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
키보드가 나타나지 않거나, 화면이 멈추거나, 기기에서 오류가 발생하면, 테스트는 실패했습니다
-
콘솔을 종료해 주세요
+
콘솔의 전원을 꺼 주세요
만약 일반 3DS 홈 메뉴로 부팅되지 않거나, 본체 설정 앱 혹은 키보드에 접근이 불가하다면, 즉시 커펌 삭제를 중단하십시오! Nintendo Homebrew Discord 서버에서 영어로 도움을 요청하십시오. “My 3DS has failed the safety test.” 정도로 시작하여 실패한 구간을 (영문 설명서를 확인하여) 설명해 주세요.
이 섹션에서는 홈브류나 덤프된 카트리지 데이터와 같이, 비정상적인 콘텐츠를 전부 삭제합니다. 만약 중요한 세이브 데이터가 있다면, 저장 데이터 매니저를 통해 백업 후 진행해 주세요!
-
콘솔을 시작해 주세요
+
콘솔의 전원을 켜 주세요
콘솔에서 본체 설정을 열어 주세요
데이터 관리 -> 닌텐도 3DS -> 소프트웨어 관리로 이동하세요
소프트웨어 목록에서, 커펌 사용 중 설치한 닌텐도 제품이 아닌 콘텐츠를 모두 지워주세요
@@ -709,14 +693,14 @@ window.cookieconsent.initialise({
성공하면 Homebrew Launcher가 실행될 것입니다
홈브류 목록에서 DSiWare Uninstaller를 실행해 주세요
안내문을 따라 진행하며 프로그램에서 삭제를 진행하도록 하세요
-
이 방법이 성공했다면, Homebrew Launcher를 나가서 콘솔을 종료해 주세요
+
이 방법이 성공했다면, Homebrew Launcher를 나가서 콘솔의 전원을 꺼 주세요
섹션 VI - 본체 초기화
이 섹션에서는 모든 비정상 항목이 삭제되고, eShop이 정상적으로 동작하게 유도합니다. 이 과정에서 3DS에 설치된 모든 항목이 삭제되며, 한국 내수용이 아닌 기기에서는 NNID에서도 로그아웃됩니다. 이 과정에서 콘솔의 암호화 키가 재설정되며, 이는 SD 콘텐츠의 백업이 있더라도 기존 데이터를 사용하지 못하게 됨을 의미한다는 걸 명심하십시오.
Upload your movable.sed using the “Choose File” option
Click “Build and Download”
@@ -553,7 +540,7 @@ window.cookieconsent.initialise({
This will download an exploit DSiWare called F00D43D5.bin and a payload called bb3.bin inside of a zip archive (DSIWARE_EXPLOIT.zip)
-
Copy bb3.bin from DSIWARE_EXPLOIT.zip to the root of your SD card
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
This file does not need to be opened or extracted
@@ -578,9 +565,32 @@ window.cookieconsent.initialise({
+
Deel II - BannerBomb3
+
+
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
+
+
+
Zet je console aan
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
+
+
Your console should show the BB3 multihax menu
+
+
+
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
+
+
Your console will automatically reboot
+
+
+
Zet je console uit
+
Plaats je SD kaart in je computer
+
Navigeer naar Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare op je SD-kaart
+
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. Dit bestand is niet meer nodig
Navigeer naar Data Management -> DSiWare -> SD Card -> (page 2)
Let op welk nummer op de DSiWare titel op de tweede pagina staat (het zal een getal tussen 1 en 6 zijn)
Zet je console uit
-
Plaats je SD-kaart in je computer
+
Plaats je SD kaart in je computer
Navigeer naar Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare op je SD-kaart
Open de output_(naam) .zip bestand en navigeer naar China_Taiwan -> output_hax
Kopieer het .bin bestand dat hetzelfde nummer is als het nummer dat op de tweede pagina van het DSiWare Management menu stond naar de Nintendo DSiWare map, en overschrijf wanneer hierom gevraagd wordt
Upload your movable.sed using the “Choose File” option
Click “Build and Download”
@@ -556,7 +542,7 @@ window.cookieconsent.initialise({
This will download an exploit DSiWare called F00D43D5.bin and a payload called bb3.bin inside of a zip archive (DSIWARE_EXPLOIT.zip)
-
Copy bb3.bin from DSIWARE_EXPLOIT.zip to the root of your SD card
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
This file does not need to be opened or extracted
@@ -581,33 +567,32 @@ window.cookieconsent.initialise({
-
Section II - Hardware Button Check
+
Deel II - BannerBomb3
-
In this section, you will see whether you can access Safe Mode on your console. This will determine which method you will follow on the next page.
-
-
Your SD card should remain in your computer while you perform this check.
-
-
In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.
+
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
Zet je console aan
-
Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
-
The camera applet should appear
+
Your console should show the BB3 multihax menu
+
+
+
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
+
+
Your console will automatically reboot
Zet je console uit
+
Plaats je SD kaart in je computer
+
Navigeer naar Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare op je SD-kaart
+
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. Dit bestand is niet meer nodig
-
Next steps: Choose an exploit
-
-
If the camera appeared in the previous section, Safe Mode is likely to be working on your console.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
Als je console nog geen custom firmware heeft, update dan NIET naar de nieuwste versie behalve als deze handleiding het zegt.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
@@ -535,7 +519,7 @@ window.cookieconsent.initialise({
I am on the latest system version. Is mijn console hackbaar zonder externe hardware/vereisten?
-
Het hangt af van je console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
+
Het hangt af van je console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
Als je console nog geen custom firmware heeft, update dan NIET naar de nieuwste versie behalve als deze handleiding het zegt.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
Vind je dit een goede handleiding? We accepteren donaties.
+
+
+
+
+
+
+
+Technical Details (optional)
+
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
+
+
+
+
This method requires a working 3DS camera.
+
+
Wat je nodig hebt
+
+
+
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instructies
+
+
Deel I - Voorbereiding
+
+
+
Zet je console uit
+
Plaats je SD kaart in je computer
+
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
+
+
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
+
+
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
+
+
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
+
+
+
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
+
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
+
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
+
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Stop je SD-kaart terug in je console
+
Zet je console aan
+
+
+
Section II - freakyhax
+
+
+
Stop je SD-kaart terug in je console
+
Zet je console aan
+
Launch Freakyforms Deluxe
+
In the game menu, select Play -> Camera -> Load a QR code
+
Select the QR code
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Deel III - Boot9strap installeren
+
+
In this section, you will install custom firmware onto your console.
+
+
+
When prompted, input the key combo given on the top screen to install boot9strap
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Druk op (Start) om op te slaan en opnieuw op te starten
+
+
+
At this point, your console will boot to Luma3DS by default.
+
+
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+
On the next page, you will install useful homebrew applications to complete your setup.
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch nimdsphax which launches SafeB9SInstaller.
-
See here for information about uloader and here for information about menuhax67.
+
See here for information about nimdsphax and here for information about menuhax67.
-
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
On the next page, you will install useful homebrew applications to complete your setup.
-
Section V - Removing menuhax67
+
Section IV - Removing menuhax67
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
Vind je dit een goede handleiding? We accepteren donaties.
+
+
+
+
+
+
+
+Technical Details (optional)
+
+
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
+
See here for information about uloader and here for information about menuhax67.
+
+
+
+
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
+
+
+
Deel I - Voorbereiding
+
+
+
Zet je console uit
+
Plaats je SD kaart in je computer
+
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
+
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
+
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
+
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
+
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy uloader.3dsx to the /3ds/ folder on your SD card
+
Stop je SD-kaart terug in je console
+
+
+
Section II - menuhax67
+
+
In this section you will use the menuhax67 exploit installed earlier to launch uloader, which will load SafeB9SInstaller.
+
+
+
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
+
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
+
+
If the exploit was successful, your console will have booted into the Homebrew Launcher
+
Launch uloader from the list of homebrew
+
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
+
+
If the console freezes or crashes, force power off the console, then retry this section
+
+
+
+
+
Deel III - Boot9strap installeren
+
+
In this section, you will install custom firmware onto your console.
+
+
+
When prompted, input the key combo given on the top screen to install boot9strap
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Druk op (Start) om op te slaan en opnieuw op te starten
+
+
+
At this point, your console will boot to Luma3DS by default.
+
+
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+
On the next page, you will install useful homebrew applications to complete your setup.
+
+
+
Section IV - Removing menuhax67
+
+
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
+
+
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
+
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
+
Vind je dit een goede handleiding? We accepteren donaties.
+
+
+
+
+
+
+
+Technical Details (optional)
+
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
+
+
+
This method requires a working 3DS camera.
+
+
This process will overwrite your Cubic Ninja save file, if you have one.
The latest release of Luma3DS (the Luma3DS .zip file)
+
+
+
Instructies
+
+
Deel I - Voorbereiding
+
+
+
Zet je console uit
+
Plaats je SD kaart in je computer
+
Copy Launcher.dat from the folder appropriate for your console from the ninjhax2-dx .zip file to the root of your SD card
+
+
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
+
+
+
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
+
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
+
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
+
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
+
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
Wat je nodig hebt
+
+
+
The game “Pokémon Picross” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Pokémon Picross
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instructies
+
+
Deel I - Voorbereiding
+
+
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
+
+
+
Zet je console uit
+
Plaats je SD kaart in je computer
+
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
+
+
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
+
+
+
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
+
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
+
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
+
+
+
+
Section II - PicHaxx
+
+
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
Vind je dit een goede handleiding? We accepteren donaties.
+
+
+
+
+
+
+
This set of instructions does not support the Japanese version of SmileBASIC.
+
+
+Technical Details (optional)
+
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
+
+
+
Wat je nodig hebt
+
+
The game “SmileBASIC” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install SmileBASIC
+
+
+
The latest release of smilehax-IIe (direct download)
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instructies
+
+
Deel I - Voorbereiding
+
+
+
Zet je console uit
+
Plaats je SD kaart in je computer
+
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
+
+
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
+
+
+
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
+
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
+
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
+
Copy the petitcom .icn for your region to the root of your SD card
+
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Stop je SD-kaart terug in je console
+
Zet je console aan
+
+
+
Section II - smilehax
+
+
+
Launch SmileBASIC
+
+
Update the game if prompted
+
+
+
Select the “Publish/Download Projects” option
+
Select the “Download (Receive) using Public Key” option
+
Press the “Yes” button
+
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
+
Press the “Yes” button to confirm the download of PMODEM141
+
Press “OK”, then “Back”, then “Browse Projects”
+
Select PMODEM141, then press “Select File”
+
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
+
Select RECEIVE FILE SIMPLEX
+
Prepare the device you use to play the .wav file
+
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
+
Now select 300BPS, then play the .wav file
+
When it finishes, press “Yes”, then press “OK”
+
Press the START button
+
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
+
+
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
+
+
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Deel III - Boot9strap installeren
+
+
In this section, you will install custom firmware onto your console.
+
+
+
When prompted, input the key combo given on the top screen to install boot9strap
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Druk op (Start) om op te slaan en opnieuw op te starten
+
+
+
At this point, your console will boot to Luma3DS by default.
+
+
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+
On the next page, you will install useful homebrew applications to complete your setup.
Vind je dit een goede handleiding? We accepteren donaties.
+
+
+
+
+
+
+
+Technical Details (optional)
+
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
Wat je nodig hebt
+
+
+
The game “Steel Diver: Sub Wars” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instructies
+
+
Deel I - Voorbereiding
+
+
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
+
+
+
Zet je console uit
+
Plaats je SD kaart in je computer
+
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
+
+
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
+
+
+
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
+
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
+
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
+
Copy the steelhax folder from the Steelhax-release.zip to the root of your SD card
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Stop je SD-kaart terug in je console
+
Zet je console aan
+
+
+
Section II - Steelminer
+
+
In this section, you will create a hacked Steel Diver: Sub Wars save file that, when used, will load the Homebrew Launcher on your console.
+
+
+
Launch “Steel Diver: Sub Wars” once and select a Mii to initialize your save file
+
+
Decline the game update when prompted
+
If you have already updated the game, use the Data Management menu of the System Settings to delete the update
Vind je dit een goede handleiding? We accepteren donaties.
+
+
+
+
+
+
+
+Technical Details (optional)
+
For technical details on the exploits that you will be using on this page, see here.
+
+
+
+
Compatibility Notes
+
+
Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions, and 11.17.0 in the EUR, JPN and USA regions.
+
+
The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the console you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+
+
Wat je nodig hebt
+
+
+
The latest release of super-skaterhax (the release .zip file)
The latest release of Luma3DS (the Luma3DS .zip file)
+
+
+
Deel I - Voorbereiding
+
+
In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
+
+
+
Zet je console uit
+
Plaats je SD kaart in je computer
+
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
+
+
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
+
+
+
Copy everything inside the folder for your console’s region (and also system version if the region is USA) in the super-skaterhax .zip to the root of your SD card
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Stop je SD-kaart terug in je console
+
Zet je console aan
+
+
+
+
+
Section II - super-skaterhax
+
+
In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+
Als je dat nog niet gedaan hebt, zorg ervoor dat je een werkende internetverbinding hebt ingesteld op je console.
+
+
+
On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+
+
If you are unable to open the camera, open the Internet Browser and manually type the URL instead (https://zoogie.github.io/web/super/ for EUR/USA/JPN, https://zoogie.github.io/web/korea for KOR)
+
+
+
Tap the QR code button and scan one of the following QR codes for your console’s region here
+
+
If you get a security certificate warning, press (A) to allow the connection
+
+
+
Press the (Select) button to open the bookmark tab
+
+
If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+
+
+
Tap “Bookmark this page”
+
Press (B) once to return to the browser
+
Press (Start) to open the context menu
+
+
If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+
+
+
Tap on “Settings”
+
Tap on “Delete Cookies”
+
Druk op (A) om door te gaan
+
Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+
Select the “GO GO!” button on the top screen
+
+
If any prompts appear, approve all of them
+
If your console freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+
If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
Als je console nog geen custom firmware heeft, update dan NIET naar de nieuwste versie behalve als deze handleiding het zegt.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
Het bestand SafeB9SInstaller.bin ontbreekt of zit in de verkeerde map. Download de nieuwste versie van SafeB9SInstaller, pak het uit en plaats SafeB9SInstaller.bin op de hoofdmap van je SD-kaart. Voeg de .bin extensie niet toe als je het nog niet ziet.
+
+
SigHaxed FIRM was not installed! Kijk naar het onderste scherm voor meer informatie.
De website heeft bepaald dat jouw ‘movable.sed’ niet kan gebruteforced worden. Zorg ervoor dat je de website het juiste ID0 gegeven hebt. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.
-
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Homebrew Launcher (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.
+
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.
Er kan een probleem zijn met je F00D43D5.bin bestand (het kan beschadigd zijn of bedoeld voor een andere 3DS). Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.
-
Boot9strap installeren (USM)
+
Installing boot9strap (Fredtool-Inject)
-Safe Mode system update succeeds instead of giving error 003-1099
-
-
The file usm.bin is missing or misplaced. Download the latest release of unSAFE_MODE and place usm.bin on the root of your SD card. Voeg de .bin extensie niet toe als je het nog niet ziet.
-
-
There is also a possibility that the console isn’t reading your SD card. Make sure it is inserted and formatted correctly.
-
-
-
-Kan SafeB9SInstaller.bin niet openen
-
-
Het bestand SafeB9SInstaller.bin ontbreekt of zit in de verkeerde map. Download de nieuwste versie van SafeB9SInstaller, pak het uit en plaats SafeB9SInstaller.bin op de hoofdmap van je SD-kaart. Voeg de .bin extensie niet toe als je het nog niet ziet.
-
-
-
-Failed to mount the SD card!
-
-
Maak een back-up van je data en herformatteer je SD-kaart als FAT32 met het aanbevolen hulpmiddel afhankelijk van je besturingssysteem: (Windows, macOS of Linux). MiniTool Partition Wizard en het formatteer programma van HP (HPUSBDisk) zijn ervoor bekend om problemen te veroorzaken met 3DS SD-kaarten.
-
-
Mocht dit niet lukken, gebruik dan een andere SD-kaart.
-
-
-
Boot9strap installeren (Fredtool)
-
-
-Error on Fredtool Injector page
+Error on DSiHaxInjector page
Zorg ervoor dat je movable.sed en DSiWare back-up van dezelfde console komen. Een mismatch resulteert in een error.
-
-Unable to select "Haxxxxxxxxx!" because the BB3 multihax menu appears
-
-
You forgot to delete F00D43D5.bin from the SD card. Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare on your SD card and delete the F00D43D5.bin file.
-
-
"Haxxxxxxxxx!" does not appear
@@ -712,17 +667,11 @@ window.cookieconsent.initialise({
-DS Connection Settings launches normally
+DSiWare launches normally
Haxxxxxxxxx! is niet van je SD-kaart naar het systeemgeheugen gekopieerd.
-
-Black screen when launching DS Connection Settings
-
-
Je DS Connection Settings app is stuk en je zult toegang nodig hebben tot de Homebrew Launcher om dit probleem op te lossen. Sluit je aan bij Nintendo Homebrew op Discord voor hulp.
-
-
SD card is grayed out in Flipnote
@@ -758,14 +707,14 @@ window.cookieconsent.initialise({
"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
+
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
@@ -777,7 +726,7 @@ window.cookieconsent.initialise({
"An error has occurred, forcing the software to close..." (white message box)
-
There is an issue with your otherapp.bin file. Download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
+
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Sluit je aan bij Nintendo Homebrew op Discord voor hulp.
-
-Kan SafeB9SInstaller.bin niet openen
-
-
Het bestand SafeB9SInstaller.bin ontbreekt of zit in de verkeerde map. Download de nieuwste versie van SafeB9SInstaller, pak het uit en plaats SafeB9SInstaller.bin op de hoofdmap van je SD-kaart. Voeg de .bin extensie niet toe als je het nog niet ziet.
-
-
Failed to mount the SD card!
Maak een back-up van je data en herformatteer je SD-kaart als FAT32 met het aanbevolen hulpmiddel afhankelijk van je besturingssysteem: (Windows, macOS of Linux). MiniTool Partition Wizard en het formatteer programma van HP (HPUSBDisk) zijn ervoor bekend om problemen te veroorzaken met 3DS SD-kaarten.
Het bestand SafeB9SInstaller.bin ontbreekt of zit in de verkeerde map. Download de nieuwste versie van SafeB9SInstaller, pak het uit en plaats SafeB9SInstaller.bin op de hoofdmap van je SD-kaart. Voeg de .bin extensie niet toe als je het nog niet ziet.
-
-
Frozen on "Doing agbhax..."
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
Mocht dit niet lukken, gebruik dan een andere SD-kaart.
-
Homebrew Launcher (super-skaterhax)
+
Installing boot9strap (super-skaterhax)
"An error has occurred. Please save your data in any software currently in use, then restart the system."
diff --git a/nl_NL/uninstall-cfw.html b/nl_NL/uninstall-cfw.html
index 9d6ba97cc9..a40ca848ab 100644
--- a/nl_NL/uninstall-cfw.html
+++ b/nl_NL/uninstall-cfw.html
@@ -358,23 +358,23 @@ window.cookieconsent.initialise({
-
Se o seu console estiver executando Luma 10.2.1 ou superior, a atualização é 100% segura. Você pode verificar a sua versão do Luma segurando (Select) enquanto inicializa o seu console.
Se o seu console estiver em uma versão do Luma mais antiga, você deve atualizar o Luma antes de atualizar o seu console para 11.17.0.
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua.
-
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Especificamente, os consoles New3DS-family têm um método de software livre, enquanto os consoles Old3DS-family precisarão usar exploits alternativos que dependem de hardware ou software externo.
+
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
@@ -535,7 +519,7 @@ window.cookieconsent.initialise({
Estou na versão mais recente do sistema. É possível que meu console seja invadido sem o uso de qualquer hardware externo ou pré-requisito?
-
Depende do seu modelo de console. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. aplicativos da eShop, itens físicos), enquanto 3DS / 3DS XL / 2DS requerem software adicional ou hardware.
Se o seu console estiver executando Luma 10.2.1 ou superior, a atualização é 100% segura. Você pode verificar a sua versão do Luma segurando (Select) enquanto inicializa o seu console.
Se o seu console estiver em uma versão do Luma mais antiga, você deve atualizar o Luma antes de atualizar o seu console para 11.17.0.
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua.
-
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Especificamente, os consoles New3DS-family têm um método de software livre, enquanto os consoles Old3DS-family precisarão usar exploits alternativos que dependem de hardware ou software externo.
+
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
freakyhax é um exploit para o jogo Freakyforms Deluxe descoberto e publicado por plutooo. Funciona nas versões de 9.0.0 a 11.17.0 nos consoles da região EUR, EUA e JPN.
+
+
+
+
Este método requer uma câmera de 3DS funcional.
+
+
O que é necessário
+
+
+
Uma cópia EUR/EUA/JPN de Freakyforms Deluxe (eShop ou cartucho)
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instruções
+
+
Seção I - Preparação
+
+
+
Desligue seu console
+
Insira o cartão SD no seu computador
+
Copie todos os arquivos e pastas dentro da pasta /build/<your console and region>/exploit/ do .zip do freakyhax para a raiz do seu cartão SD
+
+
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
+
+
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Não adicione a extensão .bin se você não a vê
+
+
+
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
+
+
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
+
+
+
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
+
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
+
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
+
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
+
+
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsira o cartão SD no seu console
+
Ligue o seu console
+
+
+
Seção II - freakyhax
+
+
+
Reinsira o cartão SD no seu console
+
Ligue o seu console
+
Inicie Freakyforms Deluxe
+
No menu do jogo, selecione Play -> Camera -> Load a QR Code
+
Selecione o código QR
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Seção III - Instalando o boot9strap
+
+
Nesta seção, você instalará custom firmware no seu console.
+
+
+
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
+
+
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
+
+
+
Quando concluído, aperte (A) para reiniciar o seu console
+
Seu console deve ter inicializado o menu de configuração do Luma3DS
+
+
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
+
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
+
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
+
+
+
Aperte (Start) para salvar e reiniciar
+
+
+
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
+
+
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
+
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Copie o arquivo 42383841.bin da pasta clean do arquivo DSiWare baixado (output_(nome).zip) para a pasta Nintendo DSiWare, substituindo a pasta existente
Reinsira o cartão SD no seu console
Ligue o seu console
-
Abra Configurações do Sistema no seu console
-
Navegue para Gerenciamento de Dados -> DSiWare -> Cartão SD (imagem)
+
Abra as Configurações do Sistema no seu console
+
Navegue para Gerenciamento de dados -> DSiWare -> Cartão SD (imagem)
Nós usamos BannerBomb3 para instalar menuhax67, o que nos permite acessar o Homebrew Launcher. A partir daí, iniciamos o uloader que inicia o SafeB9SInstaller.
+
Nós usamos BannerBomb3 para instalar menuhax67, o que nos permite acessar o Homebrew Launcher. From there, we launch nimdsphax which launches SafeB9SInstaller.
-
Veja aqui para obter informações sobre o uloader e aqui para obter informações sobre o menuhax67.
+
See here for information about nimdsphax and here for information about menuhax67.
-
Você só deve ser capaz de chegar a esta página se estiver executando a versão 11.15.0 ou 11.14.0. Se você estiver em qualquer firmware acima da 11.15.0, uloader irá falhar.
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
-
Copie bb3.bin do Release .zip para a raíz do seu cartão SD, substituindo o arquivo existente
-
Copie Launcher.dat da pasta para seu modelo e região dentro do Release .zip para a raiz do seu cartão SD
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
-
Copie uloader.3dsx para a pasta /3ds/ no seu cartão SD
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
Reinsira o cartão SD no seu console
-
Seção II - BannerBomb3
+
Section II - menuhax67
-
Nesta seção, você irá acionar o exploit BannerBomb3 usando o menu de Gerenciamento de DSiWare e usá-lo para instalar o exploit menuhax67.
-
-
-
Ligue o seu console
-
Abra as Configurações do Sistema no seu console
-
Navegue para Gerenciamento de dados -> DSiWare -> Cartão SD (imagem)
-
-
Seu console deve mostrar o menu multihax do BB3
-
-
-
Use os botões direcionais para navegar e pressione o botão (A) para selecionar “Install *hax”
-
-
Seu console irá reiniciar automaticamente
-
-
-
-
-
Seção III - menuhax67
-
-
Nesta seção você usará o exploit menuhax67 instalado antes para iniciar o uloader, que carregará o SafeB9SInstaller.
+
In this section you will use the menuhax67 exploit installed earlier to launch nimdsphax, which will load SafeB9SInstaller.
Toque no pequeno ícone de configurações do Menu HOME no canto superior esquerdo da tela inferior ()
@@ -593,15 +552,15 @@ window.cookieconsent.initialise({
Se o exploit foi bem sucedido, seu console irá iniciar no Homebrew Launcher
-
Abra o uloader da lista de homebrew
+
Launch nimdsphax from the list of homebrew
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
-
Se o console congelar ou ter um crash, force o desligamento do console e tente novamente esta seção
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
Seção IV - Instalando o boot9strap
+
Seção III - Instalando o boot9strap
Nesta seção, você instalará custom firmware no seu console.
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
-
Seção V - Removendo menuhax67
+
Section IV - Removing menuhax67
Nesta seção, você ativará o exploit BannerBomb3 uma segunda vez para que você possa desinstalar o exploit menuhax67 que foi instalado na Seção II. Isto permitirá que você use as configurações do Menu HOME normalmente novamente.
Nós usamos BannerBomb3 para instalar menuhax67, o que nos permite acessar o Homebrew Launcher. A partir daí, iniciamos o uloader que inicia o SafeB9SInstaller.
+
+
Veja aqui para obter informações sobre o uloader e aqui para obter informações sobre o menuhax67.
+
+
+
+
Você só deve ser capaz de chegar a esta página se estiver executando a versão 11.15.0 ou 11.14.0. Se você estiver em qualquer firmware acima da 11.15.0, uloader irá falhar.
A versão mais recente do boot9strap (download direto)
+
A versão mais recente do uloader (download direto)
+
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
+
+
+
Seção I - Preparação
+
+
+
Desligue seu console
+
Insira o cartão SD no seu computador
+
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
+
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
+
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
+
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
+
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
+
+
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
+
+
+
Copie uloader.3dsx para a pasta /3ds/ no seu cartão SD
+
Reinsira o cartão SD no seu console
+
+
+
Section II - menuhax67
+
+
Nesta seção você usará o exploit menuhax67 instalado antes para iniciar o uloader, que carregará o SafeB9SInstaller.
+
+
+
Toque no pequeno ícone de configurações do Menu HOME no canto superior esquerdo da tela inferior ()
+
+
Se o console congelar por um tempo e depois acontecer um crash, certifique-se de ter Launcher.dat na raiz do seu cartão SD
+
+
+
Se o exploit foi bem sucedido, seu console irá iniciar no Homebrew Launcher
+
Abra o uloader da lista de homebrew
+
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
+
+
Se o console congelar ou ter um crash, force o desligamento do console e tente novamente esta seção
+
+
+
+
+
Seção III - Instalando o boot9strap
+
+
Nesta seção, você instalará custom firmware no seu console.
+
+
+
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
+
+
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
+
+
+
Quando concluído, aperte (A) para reiniciar o seu console
+
Seu console deve ter inicializado o menu de configuração do Luma3DS
+
+
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
+
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
+
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
+
+
+
Aperte (Start) para salvar e reiniciar
+
+
+
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
+
+
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
+
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
+
+
+
Section IV - Removing menuhax67
+
+
Nesta seção, você ativará o exploit BannerBomb3 uma segunda vez para que você possa desinstalar o exploit menuhax67 que foi instalado na Seção II. Isto permitirá que você use as configurações do Menu HOME normalmente novamente.
+
+
+
Abra as Configurações do Sistema no seu console
+
Navegue para Gerenciamento de dados -> DSiWare -> Cartão SD (imagem)
+
Use os botões direcionais para navegar e pressione o botão (A) para selecionar “Uninstall *hax”
+
Ninjhax2 é um exploit para o jogo “Cubic Ninja” feito por smealum. Esta página usa uma versão atualizada do ninjhax por zoogie chamada ninjhax2-dx, que suporta a versão 11.17.0.
+
+
+
Este método requer uma câmera de 3DS funcional.
+
+
Este processo irá sobrescrever o seu save de Cubic Ninja, se você tiver um.
Se o jogo sair para o Menu HOME, então o exploit foi instalado corretamente
+
+
+
Abra “Cubic Ninja” novamente
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Seção III - Instalando o boot9strap
+
+
Nesta seção, você instalará custom firmware no seu console.
+
+
+
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
+
+
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
+
+
+
Quando concluído, aperte (A) para reiniciar o seu console
+
Seu console deve ter inicializado o menu de configuração do Luma3DS
+
+
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
+
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
+
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
+
+
+
Aperte (Start) para salvar e reiniciar
+
+
+
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
+
+
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
+
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Este método de usar o Seedminer para exploiting usa seu arquivo movable.sed para fazer um save personalizado para o Pokémon Picross, que pode ser usado para iniciar o Homebrew Launcher.
+
+
+
Esse processo irá sobrescrever seu save de Pokémon Picross, se você tiver um. Se você deseja preservar seus dados do jogo Pokémon Picross, você deve fazer um backup do seu arquivo 00000001.sav antes de substituí-lo.
+
+
O que é necessário
+
+
+
O jogo “Pokémon Picross” instalado no seu console
+
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instruções
+
+
Seção I - Preparação
+
+
Nesta seção, você copiará alguns dos arquivos que serão usados para iniciar o Homebrew Launcher.
+
+
+
Desligue seu console
+
Insira o cartão SD no seu computador
+
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
+
+
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
+
+
+
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
+
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
+
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Não adicione a extensão .bin se você não a vê
+
+
+
Copie movable.sed do seu computador para a raiz do seu cartão SD
+
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
+
+
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
+
+
+
+
Seção II - PicHaxx
+
+
Nesta seção, você criará um arquivo de save modificado para o Pokémon Picross que, quando carregado, executará o Homebrew Launcher no seu console.
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Seção III - Instalando o boot9strap
+
+
Nesta seção, você instalará custom firmware no seu console.
+
+
+
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
+
+
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
+
+
+
Quando concluído, aperte (A) para reiniciar o seu console
+
Seu console deve ter inicializado o menu de configuração do Luma3DS
+
+
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
+
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
+
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
+
+
+
Aperte (Start) para salvar e reiniciar
+
+
+
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
+
+
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
+
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Este conjunto de instruções não suporta a versão japonesa do SmileBASIC.
+
+
+Detalhes técnicos (opcional)
+
smilehax-IIe é um exploit para o jogo “SmileBASIC” feito por zoogie, compatível com versões de sistema 9.0.0 até 11.17.0 para consoles de região USA/EUR/JPN.
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instruções
+
+
Seção I - Preparação
+
+
+
Desligue seu console
+
Insira o cartão SD no seu computador
+
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
+
+
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
+
+
+
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
+
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
+
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Não adicione a extensão .bin se você não a vê
+
+
+
Transfira o .wav para sua região do Release_sh2e .zip para um dispositivo que pode reproduzir arquivos .wav, por exemplo, um telefone
+
Copie o .icn petitcom para sua região para a raiz do seu cartão SD
+
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
+
+
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsira o cartão SD no seu console
+
Ligue o seu console
+
+
+
Seção II - smilehax
+
+
+
Abra o SmileBASIC
+
+
Atualize o jogo se solicitado
+
+
+
Selecione a opção “Publish/Download Projects”
+
Selecione a opção “Download (Receive) using Public Key”
+
Pressione o botão “Yes”
+
Digite a chave pública “NJEQK3A4” usando o teclado na tela
+
Pressione o botão “Yes” para confirmar o download do PMODEM141
+
Pressione “OK”, depois “Back”, depois “Browse Projects”
+
Selecione PMODEM141, então pressione “Select File”
+
Selecione PMODEM141.PRG, pressione “OK”, então “Sim” para executá-lo
+
Selecione RECEIVE FILE SIMPLEX
+
Prepare o dispositivo que você usa para reproduzir o arquivo .wav
+
Mantenha seu console sobre três centrímetros do dispostivo tocando o arquivo .wav e use um volume razoável (não alto) para reproduzir o .wav
+
Agora selecione 300BPS, e então reproduza o arquivo .wav
+
Quando terminar, pressione “Yes” e então pressione “OK”
+
Pressione o botão START
+
Selecione o arquivo SH2E-xxx.TXT e pressione OK, em seguida “Yes” para executá-lo
+
+
Se você for expulso de volta ao menu, certifique-se de estar usando a versão mais recente do SmileBASIC
+
+
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Seção III - Instalando o boot9strap
+
+
Nesta seção, você instalará custom firmware no seu console.
+
+
+
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
+
+
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
+
+
+
Quando concluído, aperte (A) para reiniciar o seu console
+
Seu console deve ter inicializado o menu de configuração do Luma3DS
+
+
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
+
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
+
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
+
+
+
Aperte (Start) para salvar e reiniciar
+
+
+
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
+
+
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
+
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Este método de usar o Seedminer para exploiting usa seu movable.sed para escrever um save modificado para Steel Diver: Sub Wars, que pode então ser usado para iniciar o Homebrew Launcher.
+
+
+
Esse processo irá sobrescrever seu save do jogo Steel Diver: Sub Wars, se você tiver um. Se você deseja preservar seu dados de Steel Diver: Sub Wars, você deve fazer um backup de seu arquivo 00000001.sav antes de substituí-lo.
+
+
O que é necessário
+
+
+
O jogo “Steel Diver: Sub Wars” instalado no seu console
+
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
+
The latest release of HBL otherapps (direct download)
+
+
+
Instruções
+
+
Seção I - Preparação
+
+
Nesta seção, você copiará alguns dos arquivos que serão usados para iniciar o Homebrew Launcher.
+
+
+
Desligue seu console
+
Insira o cartão SD no seu computador
+
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
+
+
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
+
+
+
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
+
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
+
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
+
Copie a pasta steelhax do Steelhax-release.zip para a raiz do seu cartão SD
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Não adicione a extensão .bin se você não a vê
+
+
+
Copie movable.sed do seu computador para a raiz do seu cartão SD
+
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
+
+
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsira o cartão SD no seu console
+
Ligue o seu console
+
+
+
Seção II - Steelminer
+
+
Nesta seção, você criará um arquivo de save para o Steel Diver: Sub Wars que, quando usado, carregará o Homebrew Launcher em seu console.
+
+
+
Abra “Steel Diver: Sub Wars” uma vez e selecione um Mii para inicializar seu save
+
+
Recuse a atualização do jogo quando for pedido
+
Se você já atualizou o jogo, use o menu do Gerenciamento de Dados nas Configurações do Console para deletar o update
Navegue até Nintendo 3DS -> <ID0>-> ->` -> `title` -> `00040000` -> `0017c100` -> `data` em seu cartão SD
+
+
Região EUR: 000d7e00
+
Região JPN: 000d7c00
+
Região USA: 000d7d00
+
+
+
Copie o arquivo 00000001.sav recém-baixado para a pasta data no seu cartão SD
+
+
Sobrescreva o arquivo de save antigo quando solicitado
+
+
+
Reinsira o cartão SD no seu console
+
Ligue o seu console
+
Abra “Steel Diver: Sub Wars”
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
Seção III - Instalando o boot9strap
+
+
Nesta seção, você instalará custom firmware no seu console.
+
+
+
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
+
+
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
+
+
+
Quando concluído, aperte (A) para reiniciar o seu console
+
Seu console deve ter inicializado o menu de configuração do Luma3DS
+
+
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
+
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
+
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
+
+
+
Aperte (Start) para salvar e reiniciar
+
+
+
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
+
+
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
+
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Para detalhes técnicos sobre os exploits que você usará nesta página, consulte aqui.
+
+
+
+
Notas de Compatibilidade
+
+
Super-skaterhax (quando usado para iniciar o Homebrew Launcher) é compatível com modelos new na versão 11.16.0 em todas as regiões e 11.17.0 nas regiões EUR, JPN e EUA.
+
+
As instruções fornecidas só se aplicam ao New 3DS, New 3DS XL e ao New 2DS XL. Por favor, certifique-se de que o console que você está modificando é um New 3DS, New 3DS XL, ou New 2DS XL antes de continuar.
+
+
O que é necessário
+
+
+
The latest release of super-skaterhax (the release .zip file)
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
+
+
+
Seção I - Preparação
+
+
Nesta seção, você irá copiar os arquivos necessários para acionar tanto superskaterhax quanto o Homebrew Launcher.
+
+
+
Desligue seu console
+
Insira o cartão SD no seu computador
+
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
+
+
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
+
+
+
Copie tudo dentro da pasta para a região do seu console (e também a versão do sistema se a região for USA) no superskaterhax .zip para a raiz do seu cartão SD
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsira o cartão SD no seu console
+
Ligue o seu console
+
+
+
+
+
Seção II - super-skaterhax
+
+
Nesta seção, você visitará a página web contendo o exploit, que iniciará o Homebrew Launcher.
+
+
Se você ainda não tem, certifique-se de que você tem uma conexão de Internet ativa configurada em seu console.
+
+
+
No Menu HOME, pressione os gatilhos da Esquerda e da Direita ao mesmo tempo para abrir a câmera
+
+
Se você não consegue abrir a câmera, abra o Navegador de Internet e digite manualmente a URL (https://zoogie.github.io/web/super/ para EUR/USA/JPN, https://zoogie.github.io/web/korea para KOR)
+
+
+
Toque no botão do código QR e digitalize um dos seguintes códigos QR para a região do seu console aqui
+
+
Se você receber um aviso de certificado de segurança, aperte (A) para permitir a conexão
+
+
+
Pressione o botão (Select) para abrir a aba de favoritos
+
+
Se o seu botão (Select) não responder, toque no ícone de estrela no canto inferior esquerdo da tela
+
+
+
Toque em “Adicionar aos favoritos”
+
Aperte (B) uma vez para retornar ao navegador
+
Aperte (Start) para abrir o menu de contexto
+
+
Se o seu botão (Start) não responder, toque no menu de 3 linhas no canto inferior direito da tela
+
+
+
Toque em “Configurações”
+
Toque em “Excluir Cookies”
+
Aperte (A) para continuar
+
Aperte (Home) para retornar ao Menu HOME, depois aperte (A) imediatamente para iniciar o navegador novamente
+
Selecione o botão “GO GO!” na tela superior
+
+
Se qualquer prompt aparecer, aprove todos eles
+
Se o seu console congela em uma tela amarela, segure o botão POWER até que ele desligue e tente esta seção novamente
+
Se o seu console congela numa tela vermelha, segure o botão POWER até que ele desligue, refaça o passo 3 da Seção II e tente novamente esta seção
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
+
+
Se o seu console congela numa tela vermelha, segure o botão POWER até que ele desligue, refaça o passo 3 da Seção II e tente novamente esta seção
+
+
+
+
+
Seção III - Instalando o boot9strap
+
+
Nesta seção, você instalará custom firmware no seu console.
+
+
+
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
+
+
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
+
+
+
Quando concluído, aperte (A) para reiniciar o seu console
+
Seu console deve ter inicializado o menu de configuração do Luma3DS
+
+
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
+
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
+
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
+
+
+
Aperte (Start) para salvar e reiniciar
+
+
+
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
+
+
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
+
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Se o seu console estiver executando Luma 10.2.1 ou superior, a atualização é 100% segura. Você pode verificar a sua versão do Luma segurando (Select) enquanto inicializa o seu console.
Se o seu console estiver em uma versão do Luma mais antiga, você deve atualizar o Luma antes de atualizar o seu console para 11.17.0.
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua.
-
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Especificamente, os consoles New3DS-family têm um método de software livre, enquanto os consoles Old3DS-family precisarão usar exploits alternativos que dependem de hardware ou software externo.
+
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
Este método usa o jogo Pokémon Picross, que foi um jogo gratuito para jogar. Usando o arquivo movable.sed, você pode criar um arquivo de save modificado que lhe dará acesso ao Homebrew Launcher, que será usado para exploiting.
Este método usa o jogo Steel Diver: Sub Wars, que foi um jogo gratuito para jogar. Usando o arquivo movable.sed, você pode criar um arquivo de save modificado que lhe dará acesso ao Homebrew Launcher, que será usado para exploiting.
Assim que você tiver a chave de encriptação do console (movable.sed), você poderá usá-la em conjunto com o BannerBomb3, que usa seu arquivo movable.sed para aproveitar dos exploits no aplicativo de Configurações do Sistema.
O arquivo SafeB9SInstaller.bin está ausente ou fora do lugar apropriado. Baixe a última versão do SafeB9SInstaller, extraia e coloque SafeB9SInstaller.bin na raiz do seu cartão SD. Não adicione a extensão .bin se você não a vê.
+
+
SigHaxed FIRM was not installed! Check lower screen for more info.
O site determinou que seu movable.sed não pode ser brute-forced. Certifique-se de que você deu o ID0 correto para o site. Se o seu ID0 estiver correto, então você não poderá usar o Seedminer e precisará usar um método alternativo.
-
Se você tem um New 3DS / New 3DS XL / New 2DS XL (como indicado pelos quatro gatilhos na parte traseira e o C-Stick na direita), você pode seguir Homebrew Launcher (superskaterhax). Caso contrário, você precisará seguir um método que requer jogos ou hardware adicionais.
+
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). Caso contrário, você precisará seguir um método que requer jogos ou hardware adicionais.
Pode haver um problema com o seu arquivo F00D43D5.bin (pode estar corrompido ou destinado ao 3DS errado). Crie novamente seu arquivo F00D43D5.bin com o Bannerbomb3 Injector, garantindo que você utilize o arquivo movable.sed do seu console.
-
Instalando boot9strap (USM)
+
Installing boot9strap (Fredtool-Inject)
-A atualização do sistema no Modo de Segurança é bem-sucedida em vez de dar o erro 003-1099
-
-
O arquivo usm.bin está faltando ou está deslocado. Baixe a última versão do unSAFE_MODE e coloque usm.bin na raiz do seu cartão SD. Não adicione a extensão .bin se você não a vê.
-
-
Há também a possibilidade de o console não estar lendo seu cartão SD. Certifique-se de que está inserido e formatado corretamente.
-
-
-
-Failed to open SafeB9SInstaller.bin
-
-
O arquivo SafeB9SInstaller.bin está ausente ou fora do lugar apropriado. Baixe a última versão do SafeB9SInstaller, extraia e coloque SafeB9SInstaller.bin na raiz do seu cartão SD. Não adicione a extensão .bin se você não a vê.
-
-
-
-Failed to mount the SD card!
-
-
Faça o backup de seus dados e formate novamente seu cartão SD como FAT32 com a ferramenta recomendada dependendo do seu sistema operacional (Windows, macOS, Linux). MiniTool Partition Wizard e a ferramenta de formatação da HP (HPUSBDisk) são conhecidas por causar problemas com cartões SD para 3DS.
-
-
Se isso falhar, tente usar outro cartão SD.
-
-
-
Instalando boot9strap (Fredtool)
-
-
-Erro na página Fredtool Injector
+Error on DSiHaxInjector page
Certifique-se de que o seu movable.sed e backup de DSiWare venham do mesmo console. Uma incompatibilidade resultará em erro.
-
-Não é possível selecionar "Haxxxxxxx!" porque o menu multihax BB3 aparece
-
-
Você esqueceu de deletar F00D43D5.bin do cartão SD. Navegue até Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare no seu cartão SD e apague o arquivo F00D43D5.bin.
-
-
"Haxxxxxxxxx!" não aparece
@@ -712,17 +667,11 @@ window.cookieconsent.initialise({
-Configurações de Internet DS iniciam normalmente
+DSiWare launches normally
Haxxxxxxxxxxx! não foi copiado do cartão SD para a memória do sistema.
-
-Tela preta ao iniciar Configurações de Internet DS
-
-
Seu aplicativo das Conexões Nintendo DS está quebrado, e você precisará de acesso ao Homebrew Launcher para corrigir esse problema. Entre no Discord do Nintendo Homebrew para obter ajuda.
-
-
O cartão SD está cinza no Flipnote
@@ -758,14 +707,14 @@ window.cookieconsent.initialise({
"Ocorreu um erro. Segure o botão POWER para desligar..." (tela preta com texto)
Seus arquivos 00000001.sav e/ou otherapp.bin podem estar fora do local apropriado. Certifique-se de que 00000001.sav está em Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data e que otherapp. em está na raiz do seu cartão SD.
-
Se seus arquivos estiverem nos locais corretos, re-crie o save usando a PicHaxx Save Tool, então coloque-o em Nintendo 3DS -> <ID0> ->` -> `title` -> `00040000` -> `0017c100` -> `data`. Certifique-se de que o arquivo tem exatamente o nome de `00000001.sav` e que você usou o `movable.sed` do seu console para criá-lo. Rebaixe [otherapps.zip](/assets/otherapps.zip), coloque o arquivo `.bin` relevante para o seu console na raiz do seu cartão SD e renomee-o para `otherapp.bin`. Não adicione a extensão `.bin` se você não a vê.
+
Se seus arquivos estiverem nos locais corretos, re-crie o save usando a PicHaxx Save Tool, então coloque-o em Nintendo 3DS -> <ID0> ->` -> `title` -> `00040000` -> `0017c100` -> `data`. Certifique-se de que o arquivo tem exatamente o nome de `00000001.sav` e que você usou o `movable.sed` do seu console para criá-lo. Re-download [HBL otherapps](https://github.com/zoogie/ninjhax2.x/releases/download/v11.17/otherapps_with_CfgS_11.17.zip), place the `.bin` file relevant to your console to the root of your SD card, and rename it to `otherapp.bin`. Não adicione a extensão `.bin` se você não a vê.
@@ -777,7 +726,7 @@ window.cookieconsent.initialise({
"Um erro ocorreu, forçando o fechamento do software..." (caixa de mensagens branca)
-
Há um problema com seu arquivo otherapp.bin. Baixe otherapps.zip, coloque o arquivo .bin relevante para o seu console na raiz do seu cartão SD e renomee-o para otherapp.bin. Não adicione a extensão .bin se você não a vê.
+
Há um problema com seu arquivo otherapp.bin. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Não adicione a extensão .bin se você não a vê.
Você tem o arquivo Soundhax errado para o seu console e região, ou seu console é incompatível com o Soundhax. No último caso, seu curso de ação irá determinar em qual versão o seu 3DS está no momento. Entre no Discord do Nintendo Homebrew para obter ajuda.
-
-Failed to open SafeB9SInstaller.bin
-
-
O arquivo SafeB9SInstaller.bin está ausente ou fora do lugar apropriado. Baixe a última versão do SafeB9SInstaller, extraia e coloque SafeB9SInstaller.bin na raiz do seu cartão SD. Não adicione a extensão .bin se você não a vê.
-
-
Failed to mount the SD card!
Faça o backup de seus dados e formate novamente seu cartão SD como FAT32 com a ferramenta recomendada dependendo do seu sistema operacional (Windows, macOS, Linux). MiniTool Partition Wizard e a ferramenta de formatação da HP (HPUSBDisk) são conhecidas por causar problemas com cartões SD para 3DS.
@@ -887,12 +830,6 @@ window.cookieconsent.initialise({
-
-Failed to open SafeB9SInstaller.bin
-
-
O arquivo SafeB9SInstaller.bin está ausente ou fora do lugar apropriado. Baixe a última versão do SafeB9SInstaller, extraia e coloque SafeB9SInstaller.bin na raiz do seu cartão SD. Não adicione a extensão .bin se você não a vê.
-
-
Congelado em "Doing agbhax..."
Pode haver um problema com o seu arquivo arm11code.bin. Baixe novamente a versão mais recente do universal-otherapp, coloque-o na raiz do seu cartão SD e renomeie-o para arm11code.bin. Não adicione a extensão .bin se você não a vê.
"Ocorreu um erro. Salve seus dados em qualquer software atualmente em uso e reinicie o sistema."
diff --git a/pt_BR/uninstall-cfw.html b/pt_BR/uninstall-cfw.html
index 0aa81539d8..28aeec568a 100644
--- a/pt_BR/uninstall-cfw.html
+++ b/pt_BR/uninstall-cfw.html
@@ -358,23 +358,23 @@ window.cookieconsent.initialise({
-
点击 “Build and Download”
@@ -557,7 +543,7 @@ window.cookieconsent.initialise({
This will download an exploit DSiWare called F00D43D5.bin and a payload called bb3.bin inside of a zip archive (DSIWARE_EXPLOIT.zip)
-
Copy bb3.bin from DSIWARE_EXPLOIT.zip to the root of your SD card
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
This file does not need to be opened or extracted
@@ -582,33 +568,32 @@ window.cookieconsent.initialise({
-
第二步 – 按键检查
+
第二步 – BannerBomb3
-
In this section, you will see whether you can access Safe Mode on your console. This will determine which method you will follow on the next page.
-
-
Your SD card should remain in your computer while you perform this check.
-
-
In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.
+
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
Power on your console
-
Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
-
The camera applet should appear
+
Your console should show the BB3 multihax menu
+
+
+
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
+
+
Your console will automatically reboot
Power off your console
+
将你的 SD 卡插入到电脑
+
打开内存卡的 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 文件夹
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
@@ -536,7 +520,7 @@ window.cookieconsent.initialise({
I am on the latest system version. 我的主机是否可以在不使用任何外设的情况下破解？
-
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
+
+
+
+
This method requires a working 3DS camera.
+
+
你需要准备点啥？
+
+
+
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
操作步骤
+
+
第一步 – 准备工作
+
+
+
Power off your console
+
将你的 SD 卡插入到电脑
+
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
+
+
根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
+
+
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch nimdsphax which launches SafeB9SInstaller.
-
See here for information about uloader and here for information about menuhax67.
+
See here for information about nimdsphax and here for information about menuhax67.
-
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
On the next page, you will install useful homebrew applications to complete your setup.
-
Section V - Removing menuhax67
+
Section IV - Removing menuhax67
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
+
See here for information about uloader and here for information about menuhax67.
+
+
+
+
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
按下 “Start” 键保存设置并重启
+
+
+
At this point, your console will boot to Luma3DS by default.
+
+
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+
On the next page, you will install useful homebrew applications to complete your setup.
+
+
+
Section IV - Removing menuhax67
+
+
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
+
+
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
+
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
+
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
+
+
+
This method requires a working 3DS camera.
+
+
This process will overwrite your Cubic Ninja save file, if you have one.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
你需要准备点啥？
+
+
+
The game “Pokémon Picross” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Pokémon Picross
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
检查 SD 卡的根目录是否存在一个名为 3ds 的文件夹，如果没有则手动新建一个
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
+
+
+
+
Section II - PicHaxx
+
+
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
This set of instructions does not support the Japanese version of SmileBASIC.
+
+
+技术细节（选看）
+
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
+
+
+
你需要准备点啥？
+
+
The game “SmileBASIC” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install SmileBASIC
+
+
+
The latest release of smilehax-IIe (direct download)
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
+
Copy the petitcom .icn for your region to the root of your SD card
+
检查 SD 卡的根目录是否存在一个名为 3ds 的文件夹，如果没有则手动新建一个
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - smilehax
+
+
+
Launch SmileBASIC
+
+
Update the game if prompted
+
+
+
Select the “Publish/Download Projects” option
+
Select the “Download (Receive) using Public Key” option
+
Press the “Yes” button
+
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
+
Press the “Yes” button to confirm the download of PMODEM141
+
Press “OK”, then “Back”, then “Browse Projects”
+
Select PMODEM141, then press “Select File”
+
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
+
Select RECEIVE FILE SIMPLEX
+
Prepare the device you use to play the .wav file
+
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
+
Now select 300BPS, then play the .wav file
+
When it finishes, press “Yes”, then press “OK”
+
Press the START button
+
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
+
+
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
+
+
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
如果一切成功的话，你将自动进入 SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
第三步 – 安装 boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
When prompted, input the key combo given on the top screen to install boot9strap
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
你需要准备点啥？
+
+
+
The game “Steel Diver: Sub Wars” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
Copy the steelhax folder from the Steelhax-release.zip to the root of your SD card
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
检查 SD 卡的根目录是否存在一个名为 3ds 的文件夹，如果没有则手动新建一个
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - Steelminer
+
+
In this section, you will create a hacked Steel Diver: Sub Wars save file that, when used, will load the Homebrew Launcher on your console.
+
+
+
Launch “Steel Diver: Sub Wars” once and select a Mii to initialize your save file
+
+
Decline the game update when prompted
+
If you have already updated the game, use the Data Management menu of the System Settings to delete the update
For technical details on the exploits that you will be using on this page, see here.
+
+
+
+
兼容性注意
+
+
Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions, and 11.17.0 in the EUR, JPN and USA regions.
+
+
The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the console you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+
+
你需要准备点啥？
+
+
+
The latest release of super-skaterhax (the release .zip file)
根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
+
+
+
Copy everything inside the folder for your console’s region (and also system version if the region is USA) in the super-skaterhax .zip to the root of your SD card
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
+
+
Section II - super-skaterhax
+
+
In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+
If you haven’t already, make sure you have a working Internet connection set up on your console.
+
+
+
On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+
+
If you are unable to open the camera, open the Internet Browser and manually type the URL instead (https://zoogie.github.io/web/super/ for EUR/USA/JPN, https://zoogie.github.io/web/korea for KOR)
+
+
+
Tap the QR code button and scan one of the following QR codes for your console’s region here
+
+
如果你收到了安全证书警告，请按 A 允许连接
+
+
+
Press the (Select) button to open the bookmark tab
+
+
If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+
+
+
Tap “Bookmark this page”
+
Press (B) once to return to the browser
+
Press (Start) to open the context menu
+
+
If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+
+
+
Tap on “Settings”
+
Tap on “Delete Cookies”
+
按 “A” 键继续
+
Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+
Select the “GO GO!” button on the top screen
+
+
If any prompts appear, approve all of them
+
If your console freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+
If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
网站已经确定无法获取到你的 movable.sed。 确保先前你输入到网站的 ID0 是正确的。 If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.
-
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Homebrew Launcher (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.
+
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.
"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果你下到的东西看不到 .bin 后缀，请不要重命名它。
+
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果你下到的东西看不到 .bin 后缀，请不要重命名它。
@@ -779,7 +728,7 @@ window.cookieconsent.initialise({
"An error has occurred, forcing the software to close..." (white message box)
-
There is an issue with your otherapp.bin file. Download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果你下到的东西看不到 .bin 后缀，请不要重命名它。
+
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果你下到的东西看不到 .bin 后缀，请不要重命名它。
You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. 如需帮助，请加入 Nintendo Homebrew Discord 服务器。
"An error has occurred. Please save your data in any software currently in use, then restart the system."
diff --git a/zh_CN/uninstall-cfw.html b/zh_CN/uninstall-cfw.html
index d2e45912cb..e33d542bc8 100644
--- a/zh_CN/uninstall-cfw.html
+++ b/zh_CN/uninstall-cfw.html
@@ -358,23 +358,23 @@ window.cookieconsent.initialise({
-
Upload your movable.sed using the “Choose File” option
Click “Build and Download”
@@ -556,7 +542,7 @@ window.cookieconsent.initialise({
This will download an exploit DSiWare called F00D43D5.bin and a payload called bb3.bin inside of a zip archive (DSIWARE_EXPLOIT.zip)
-
Copy bb3.bin from DSIWARE_EXPLOIT.zip to the root of your SD card
+
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
This file does not need to be opened or extracted
@@ -581,33 +567,32 @@ window.cookieconsent.initialise({
-
第二節 — 按鍵檢查
+
第二節 — BannerBomb3
-
In this section, you will see whether you can access Safe Mode on your console. This will determine which method you will follow on the next page.
-
-
Your SD card should remain in your computer while you perform this check.
-
-
In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.
+
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
Power on your console
-
Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
-
The camera applet should appear
+
Your console should show the BB3 multihax menu
+
+
+
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
+
+
Your console will automatically reboot
Power off your console
+
將 SD 卡插入至電腦中
+
於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
+
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. 這個檔案之後不再需要了
-
Next steps: Choose an exploit
-
-
If the camera appeared in the previous section, Safe Mode is likely to be working on your console.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
@@ -535,7 +519,7 @@ window.cookieconsent.initialise({
我目前裝的系統為最新版本。 Is my console hackable without any external hardware/prerequisites?
-
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
+
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
+
+
+
+
This method requires a working 3DS camera.
+
+
必備項目
+
+
+
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of HBL otherapps (direct download)
+
+
+
操作說明
+
+
第一節 — 準備工作
+
+
+
Power off your console
+
將 SD 卡插入至電腦中
+
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
+
+
「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
+
+
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch nimdsphax which launches SafeB9SInstaller.
-
See here for information about uloader and here for information about menuhax67.
+
See here for information about nimdsphax and here for information about menuhax67.
-
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
On the next page, you will install useful homebrew applications to complete your setup.
-
Section V - Removing menuhax67
+
Section IV - Removing menuhax67
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
+
See here for information about uloader and here for information about menuhax67.
+
+
+
+
You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy uloader.3dsx to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
+
+
Section II - menuhax67
+
+
In this section you will use the menuhax67 exploit installed earlier to launch uloader, which will load SafeB9SInstaller.
+
+
+
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
+
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
+
+
If the exploit was successful, your console will have booted into the Homebrew Launcher
+
Launch uloader from the list of homebrew
+
如果一切成功的話，您將自動進入 SafeB9SInstaller
+
+
If the console freezes or crashes, force power off the console, then retry this section
+
+
+
+
+
第三節 — 安裝 boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
When prompted, input the key combo given on the top screen to install boot9strap
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
按『Start』鍵以存檔並重新啟動系統
+
+
+
At this point, your console will boot to Luma3DS by default.
+
+
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+
On the next page, you will install useful homebrew applications to complete your setup.
+
+
+
Section IV - Removing menuhax67
+
+
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
+
+
+
Launch System Settings on your console
+
Navigate to Data Management -> DSiWare -> SD Card (image)
+
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
+
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
+
+
+
This method requires a working 3DS camera.
+
+
This process will overwrite your Cubic Ninja save file, if you have one.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
必備項目
+
+
+
The game “Pokémon Picross” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Pokémon Picross
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
在 SD 卡的根目錄底下建立一個新資料夾 3ds
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
+
+
+
+
Section II - PicHaxx
+
+
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
This set of instructions does not support the Japanese version of SmileBASIC.
+
+
+Technical Details (optional)
+
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
+
+
+
必備項目
+
+
The game “SmileBASIC” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install SmileBASIC
+
+
+
The latest release of smilehax-IIe (direct download)
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
+
Copy the petitcom .icn for your region to the root of your SD card
+
在 SD 卡的根目錄底下建立一個新資料夾 3ds
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - smilehax
+
+
+
Launch SmileBASIC
+
+
Update the game if prompted
+
+
+
Select the “Publish/Download Projects” option
+
Select the “Download (Receive) using Public Key” option
+
Press the “Yes” button
+
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
+
Press the “Yes” button to confirm the download of PMODEM141
+
Press “OK”, then “Back”, then “Browse Projects”
+
Select PMODEM141, then press “Select File”
+
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
+
Select RECEIVE FILE SIMPLEX
+
Prepare the device you use to play the .wav file
+
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
+
Now select 300BPS, then play the .wav file
+
When it finishes, press “Yes”, then press “OK”
+
Press the START button
+
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
+
+
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
+
+
+
Your console will have booted into the Homebrew Launcher
+
Launch nimdsphax from the list of homebrew
+
如果一切成功的話，您將自動進入 SafeB9SInstaller
+
+
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
+
+
+
+
+
第三節 — 安裝 boot9strap
+
+
In this section, you will install custom firmware onto your console.
+
+
+
When prompted, input the key combo given on the top screen to install boot9strap
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
按『Start』鍵以存檔並重新啟動系統
+
+
+
At this point, your console will boot to Luma3DS by default.
+
+
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+
On the next page, you will install useful homebrew applications to complete your setup.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
+
+
+
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
+
+
必備項目
+
+
+
The game “Steel Diver: Sub Wars” installed on your console
+
+
If you have downloaded it before, you can redownload it
+
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
Copy the steelhax folder from the Steelhax-release.zip to the root of your SD card
+
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
+
Do not add the .bin extension if you do not already see it
+
+
+
Copy movable.sed from your computer to the root of your SD card
+
在 SD 卡的根目錄底下建立一個新資料夾 3ds
+
+
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
+
+
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - Steelminer
+
+
In this section, you will create a hacked Steel Diver: Sub Wars save file that, when used, will load the Homebrew Launcher on your console.
+
+
+
Launch “Steel Diver: Sub Wars” once and select a Mii to initialize your save file
+
+
Decline the game update when prompted
+
If you have already updated the game, use the Data Management menu of the System Settings to delete the update
For technical details on the exploits that you will be using on this page, see here.
+
+
+
+
相容性資訊
+
+
Super-skaterhax (when used to launch the Homebrew Launcher) is compatible with New models on version 11.16.0 in all regions, and 11.17.0 in the EUR, JPN and USA regions.
+
+
The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL. Please ensure that the console you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing.
+
+
必備項目
+
+
+
The latest release of super-skaterhax (the release .zip file)
「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
+
+
+
Copy everything inside the folder for your console’s region (and also system version if the region is USA) in the super-skaterhax .zip to the root of your SD card
+
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
+
+
Section II - super-skaterhax
+
+
In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
+
+
If you haven’t already, make sure you have a working Internet connection set up on your console.
+
+
+
On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
+
+
If you are unable to open the camera, open the Internet Browser and manually type the URL instead (https://zoogie.github.io/web/super/ for EUR/USA/JPN, https://zoogie.github.io/web/korea for KOR)
+
+
+
Tap the QR code button and scan one of the following QR codes for your console’s region here
+
+
If you get a security certificate warning, press (A) to allow the connection
+
+
+
Press the (Select) button to open the bookmark tab
+
+
If your (Select) button does not respond, tap the star icon on the bottom-left corner of the screen
+
+
+
Tap “Bookmark this page”
+
Press (B) once to return to the browser
+
Press (Start) to open the context menu
+
+
If your (Start) button does not respond, tap the 3-line menu on the bottom-right corner of the screen
+
+
+
Tap on “Settings”
+
Tap on “Delete Cookies”
+
按『A』 繼續
+
Press (Home) to return to the HOME Menu, then immediately press (A) to launch the browser again
+
Select the “GO GO!” button on the top screen
+
+
If any prompts appear, approve all of them
+
If your console freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+
If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
SafeB9SInstaller.bin 檔案遺失或放在了錯誤的位置。 Download the latest release of SafeB9SInstaller, extract it, and place SafeB9SInstaller.bin on the root of your SD card. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
+
+
『SigHaxed FIRM was not installed!』 Check lower screen for more info.
The website has determined that your movable.sed cannot be brute-forced. Ensure that you gave the correct ID0 to the website. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.
-
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Homebrew Launcher (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.
+
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.
您所使用的 F00D43D5.bin 檔案可能有問題(損壞或用於錯誤的 3DS 主機)。 Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.
-
安裝 boot9strap (透過 USM)
+
Installing boot9strap (Fredtool-Inject)
-Safe Mode system update succeeds instead of giving error 003-1099
-
-
The file usm.bin is missing or misplaced. Download the latest release of unSAFE_MODE and place usm.bin on the root of your SD card. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
-
-
There is also a possibility that the console isn’t reading your SD card. Make sure it is inserted and formatted correctly.
-
-
-
-Failed to open SafeB9SInstaller.bin
-
-
SafeB9SInstaller.bin 檔案遺失或放在了錯誤的位置。 Download the latest release of SafeB9SInstaller, extract it, and place SafeB9SInstaller.bin on the root of your SD card. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
-
-
-
-Failed to mount the SD card!
-
-
Back up your data and reformat your SD card as FAT32 with the recommended tool depending on your operating system (Windows, macOS, Linux). MiniTool Partition Wizard and the HP formatting tool (HPUSBDisk) are known to cause issues with 3DS SD cards.
-
-
若仍無法正常使用，請試著使用另一張 SD 卡。
-
-
-
安裝 boot9strap (透過 Fredtool)
-
-
-Error on Fredtool Injector page
+Error on DSiHaxInjector page
-
-Unable to select "Haxxxxxxxxx!" because the BB3 multihax menu appears
-
-
You forgot to delete F00D43D5.bin from the SD card. Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare on your SD card and delete the F00D43D5.bin file.
-
-
"Haxxxxxxxxx!" does not appear
@@ -712,17 +667,11 @@ window.cookieconsent.initialise({
-DS Connection Settings launches normally
+DSiWare launches normally
Haxxxxxxxxx! 沒有被從 SD 卡中複製到系統內存中。
-
-Black screen when launching DS Connection Settings
-
-
"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
+
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
@@ -777,7 +726,7 @@ window.cookieconsent.initialise({
"An error has occurred, forcing the software to close..." (white message box)
-
There is an issue with your otherapp.bin file. Download otherapps.zip, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
+
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. 請加入 Discord 上的 Nintendo Homebrew 頻道尋求幫助。
-
-Failed to open SafeB9SInstaller.bin
-
-
SafeB9SInstaller.bin 檔案遺失或放在了錯誤的位置。 Download the latest release of SafeB9SInstaller, extract it, and place SafeB9SInstaller.bin on the root of your SD card. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
-
-
Failed to mount the SD card!
Back up your data and reformat your SD card as FAT32 with the recommended tool depending on your operating system (Windows, macOS, Linux). MiniTool Partition Wizard and the HP formatting tool (HPUSBDisk) are known to cause issues with 3DS SD cards.
@@ -887,12 +830,6 @@ window.cookieconsent.initialise({
-
-Failed to open SafeB9SInstaller.bin
-
-
SafeB9SInstaller.bin 檔案遺失或放在了錯誤的位置。 Download the latest release of SafeB9SInstaller, extract it, and place SafeB9SInstaller.bin on the root of your SD card. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
-
-
Frozen on "Doing agbhax..."
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
"An error has occurred. Please save your data in any software currently in use, then restart the system."
diff --git a/zh_TW/uninstall-cfw.html b/zh_TW/uninstall-cfw.html
index af23539ff5..21cd987dc2 100644
--- a/zh_TW/uninstall-cfw.html
+++ b/zh_TW/uninstall-cfw.html
@@ -358,23 +358,23 @@ window.cookieconsent.initialise({
-
)
@@ -593,15 +552,15 @@ window.cookieconsent.initialise({
)
