Link to troubleshooting, minor wording changes (#2259)
This commit is contained in:
Florian
GitHub
parent
07c23abf17
commit
cae09789d9
9 changed files with 13 additions and 6 deletions
|
|
@ -9,4 +9,4 @@ If you haven't already, make sure you have a working Internet connection set up
|
|||
1. Click OK, then click Save
|
||||
1. When prompted, click "Test" to perform the connection test
|
||||
+ The test should succeed
|
||||
1. Click "OK" to continue
|
||||
1. Click "OK" to continue
|
||||
|
|
@ -10,4 +10,5 @@ In this section, you will enter Safe Mode (a feature available on all 3DS family
|
|||
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
|
||||
1. If the exploit was successful, your device will have booted into SafeB9SInstaller
|
||||
+ If your device instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
|
||||
+ If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
|
||||
+ If your device instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
|
||||
+ If you get a different error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-usm)
|
||||
|
|
@ -1,10 +1,11 @@
|
|||
If you would prefer a visual guide to this section, one is available [here](https://zoogie.github.io/web/flipnote_directions/).
|
||||
{: .notice--info}
|
||||
|
||||
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch the boot9strap (custom firmware) installer.
|
||||
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
|
||||
|
||||
1. Complete the initial setup process for the launched game until you reach the main menu
|
||||
+ Select the left option whenever prompted during the setup process
|
||||
+ If you encounter an issue while doing this section, [check this troubleshooting guide](troubleshooting#installing-boot9strap-fredtool) for your issue
|
||||
1. Using the touch-screen, select the large left box, then select the box with an SD card icon
|
||||
1. Once the menu loads, select the face icon, then the bottom right icon to continue
|
||||
1. Press (X) or (UP) on the D-Pad depending on which is shown on the top screen
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@ In this section, you will install custom firmware onto your device.
|
|||
{%- endif %}
|
||||
|
||||
1. When prompted, input the key combo given on the top screen to install boot9strap
|
||||
+ If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [follow this troubleshooting guide](troublshooting#issues-with-safeb9sinstaller)
|
||||
{%- if include.isbootfirm == "true" %}
|
||||
1. Once it is completed, force your device to power off by holding down the power button
|
||||
+ Your device will only boot to the SafeB9SInstaller screen until the next section is completed
|
||||
|
|
|
|||
|
|
@ -58,6 +58,6 @@ In this section, you will use the Bruteforce Movable website to retrieve your de
|
|||
+ This is usually fast (1-5 minutes)
|
||||
+ During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
|
||||
+ If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
|
||||
1. When the process is completed, download your `movable.sed` file from the site
|
||||
+ If you get "We were unable to successfully complete your bruteforce request. :`(", follow the [respective troubleshooting on this page](troubleshooting#seedminer)
|
||||
+ Keep this file as you will need it in the upcoming page
|
||||
1. Power off your device
|
||||
|
|
|
|||
|
|
@ -79,10 +79,12 @@ In this section, you will copy the hacked DS Connection Settings DSiWare to inte
|
|||
1. Launch System Settings on your device
|
||||
1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
|
||||
1. Select the "Haxxxxxxxxx!" title
|
||||
+ If you are unable to select the "Haxxxxxxxxx" title, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-fredtool)
|
||||
1. Select "Copy", then select "OK"
|
||||
1. Return to main menu of the System Settings
|
||||
1. Navigate to `Internet Settings` -> `Nintendo DS Connections`, then select "OK" ([image](/images/screenshots/fredtool/dsconnection.png))
|
||||
1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
|
||||
+ If your device does not load the JPN version of Flipnote Studio, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-fredtool)
|
||||
|
||||
#### Section V - Flipnote Exploit
|
||||
|
||||
|
|
|
|||
|
|
@ -66,6 +66,7 @@ In this section, you will launch Soundhax through the Nintendo 3DS Sound app, wh
|
|||
+ This may take many (up to 10) tries
|
||||
+ If you see the message "Could not play", you are either on a system version incompatible with Soundhax or downloaded the wrong Soundhax release
|
||||
+ If it freezes, force the console to power off by holding the power button, then try again
|
||||
+ If you get a different error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-soundhax)
|
||||
|
||||
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -63,10 +63,11 @@ In this section, you will visit the browser exploit webpage, which will use univ
|
|||
1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
|
||||
+ If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`)
|
||||
1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
|
||||
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
|
||||
+ If you get a crash or an error code, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
|
||||
+ If you get a security certificate warning, press (A) to allow the connection
|
||||
1. Tap the "PROCEED TO HAXX" button
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
+ If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser)
|
||||
|
||||
#### Section IV - Installing boot9strap
|
||||
|
||||
|
|
|
|||
|
|
@ -63,7 +63,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
|
|||
1. Launch System Settings on your device
|
||||
1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
|
||||
+ Your device should show the BB3 multihax menu
|
||||
+ If this step causes your device to crash, [follow this troubleshooting guide](troubleshooting#bannerbomb3)
|
||||
+ If the BB3 multihax menu doesn't open, [follow this troubleshooting guide](troubleshooting#bannerbomb3)
|
||||
+ If the BB3 multihax menu says "cfw installed already", you already have custom firmware and should continue from [here](checking-for-cfw)
|
||||
1. Use the D-Pad to navigate and press the (A) button to select "Install unSAFE_MODE"
|
||||
+ Your device will automatically power off
|
||||
|
|
|
|||
Loading…
Reference in a new issue