On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the troubleshooting page.
+In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
@@ -568,16 +570,10 @@ window.cookieconsent.initialise({
mset9.py script on the root of your SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter
1, then press Enter to setup MSET9
+ 1, then press Enter to ensure your console is prepared for MSET9
mset9.py script”)2, then press Enter to trigger MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter2, then press Enter to inject MSET9
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
-Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
4, then press Enter to remove MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Enter to remove MSET9
+ Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
diff --git a/de_DE/troubleshooting.html b/de_DE/troubleshooting.html index 099fc0b029..b01a8d0d7d 100644 --- a/de_DE/troubleshooting.html +++ b/de_DE/troubleshooting.html @@ -645,9 +645,23 @@ verwenden wirst
This can occur if you’ve used multiple SD cards on a 3DS and then merged the contents of the SD cards together. This is done to prevent conflicting, valid data from being merged together.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-To fix this, you will need to determine which folder contains your data. Usually, this will be the larger (or largest) of the folders. Backup and delete the smaller one(s), then create a Nintendo DSiWare folder in the one that remains and move F00D43D5.bin to that location.
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
@@ -931,7 +945,59 @@ verwenden wirstPython is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.
+ +You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.
+ +Remember, your SD card should look like this:
+ +
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+ +Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+ +You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).
+ +If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.
+ +Mii Maker data was not found on the SD card. Start again from the beginning of Section I.
+ +Your SD card does not have enough space to trigger MSET9. Free up some space and try again.
+ +At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.
+ +You have multiple ID0 folders. To determine the correct folder, follow these instructions:
@@ -962,18 +1028,19 @@ verwenden wirstFull error messages:
-One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.
This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+You are trying to run the MSET9 script from a computer running macOS, which is not currently supported. Try running the script from a computer running Windows or Linux. If you do not have access to such a computer, you will need to follow an alternate exploit.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-
mset9.py script on the root of the SD card
- mset9.bat
- +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
- -mset9.py script on the root of the SD card
- mset9.bat
- py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9mset9.py script on the root of the SD card
mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Entermset9.py script on the root of the SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET93, then press Enter to remove MSET9After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.
+On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the troubleshooting page.
+In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
@@ -568,16 +570,10 @@ window.cookieconsent.initialise({
mset9.py script on the root of your SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter
1, then press Enter to setup MSET9
+ 1, then press Enter to ensure your console is prepared for MSET9
mset9.py script”)2, then press Enter to trigger MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter2, then press Enter to inject MSET9
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
-Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
4, then press Enter to remove MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Enter to remove MSET9
+ At this point, your console will boot to Luma3DS by default.
diff --git a/es_ES/troubleshooting.html b/es_ES/troubleshooting.html index 5bb8c9094a..d457ecc7a1 100644 --- a/es_ES/troubleshooting.html +++ b/es_ES/troubleshooting.html @@ -644,9 +644,23 @@ window.cookieconsent.initialise({
This can occur if you’ve used multiple SD cards on a 3DS and then merged the contents of the SD cards together. This is done to prevent conflicting, valid data from being merged together.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-To fix this, you will need to determine which folder contains your data. Usually, this will be the larger (or largest) of the folders. Backup and delete the smaller one(s), then create a Nintendo DSiWare folder in the one that remains and move F00D43D5.bin to that location.
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
@@ -930,7 +944,59 @@ window.cookieconsent.initialise({Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.
+ +You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.
+ +Remember, your SD card should look like this:
+ +
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+ +Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+ +You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).
+ +If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.
+ +Mii Maker data was not found on the SD card. Start again from the beginning of Section I.
+ +Your SD card does not have enough space to trigger MSET9. Free up some space and try again.
+ +At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.
+ +You have multiple ID0 folders. To determine the correct folder, follow these instructions:
@@ -961,18 +1027,19 @@ window.cookieconsent.initialise({Full error messages:
-One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.
This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+You are trying to run the MSET9 script from a computer running macOS, which is not currently supported. Try running the script from a computer running Windows or Linux. If you do not have access to such a computer, you will need to follow an alternate exploit.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-mset9.py script on the root of the SD card
- mset9.bat
- +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
- -mset9.py script on the root of the SD card
- mset9.bat
- py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9mset9.py script on the root of the SD card
mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Entermset9.py script on the root of the SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET93, then press Enter to remove MSET9After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.
+On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the troubleshooting page.
+In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
@@ -570,16 +572,10 @@ window.cookieconsent.initialise({
mset9.py script on the root of your SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter
1, then press Enter to setup MSET9
+ 1, then press Enter to ensure your console is prepared for MSET9
mset9.py script”)2, then press Enter to trigger MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter2, then press Enter to inject MSET9
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
-Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
4, then press Enter to remove MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Enter to remove MSET9
+ À partir d’ici, votre console démarrera sur Luma3DS par défaut.
diff --git a/fr_FR/troubleshooting.html b/fr_FR/troubleshooting.html index bb3f41c427..78ffccfdf9 100644 --- a/fr_FR/troubleshooting.html +++ b/fr_FR/troubleshooting.html @@ -644,9 +644,23 @@ window.cookieconsent.initialise({
Cela peut se produire si vous avez utilisé plusieurs cartes SD sur une 3DS et que vous avez ensuite fusionné le contenu des cartes SD ensemble. Ceci est fait pour éviter que des données conflictuelles et valides ne soient fusionnées entre elles.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-Pour résoudre ce problème, vous devrez déterminer quel dossier contient vos données. Habituellement, ce sera le plus grand des dossiers. Sauvegardez et supprimez le ou les petits dossiers, puis créez un dossier Nintendo DSiWare dans celui qui reste et déplacez F00D43D5.bin dans le dossier que vous venez de créer.
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
@@ -930,7 +944,59 @@ window.cookieconsent.initialise({Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.
+ +You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.
+ +Remember, your SD card should look like this:
+ +
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+ +Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+ +You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).
+ +If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.
+ +Mii Maker data was not found on the SD card. Start again from the beginning of Section I.
+ +Your SD card does not have enough space to trigger MSET9. Free up some space and try again.
+ +At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.
+ +You have multiple ID0 folders. To determine the correct folder, follow these instructions:
@@ -961,18 +1027,19 @@ window.cookieconsent.initialise({Full error messages:
-One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.
This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+You are trying to run the MSET9 script from a computer running macOS, which is not currently supported. Try running the script from a computer running Windows or Linux. If you do not have access to such a computer, you will need to follow an alternate exploit.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-mset9.py script on the root of the SD card
- mset9.bat
- +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
- -mset9.py script on the root of the SD card
- mset9.bat
- py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9mset9.py script on the root of the SD card
mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Entermset9.py script on the root of the SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET93, then press Enter to remove MSET9After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.
+On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the troubleshooting page.
+In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
@@ -568,16 +570,10 @@ window.cookieconsent.initialise({
mset9.py script on the root of your SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter
1, then press Enter to setup MSET9
+ 1, then press Enter to ensure your console is prepared for MSET9
mset9.py script”)2, then press Enter to trigger MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter2, then press Enter to inject MSET9
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
-Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
4, then press Enter to remove MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Enter to remove MSET9
+ Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
diff --git a/hu_HU/troubleshooting.html b/hu_HU/troubleshooting.html index 2c387d7bc6..fca1d5f12d 100644 --- a/hu_HU/troubleshooting.html +++ b/hu_HU/troubleshooting.html @@ -648,9 +648,23 @@ window.cookieconsent.initialise({
Ez akkor fordulhat elő, ha több SD kártyát használtál a 3DS-en és összemásoltad a tartalmát az SD kártyáknak. Ez az ütközések megelőzése érdekében történik, hogy érvényes adat egyesítésre kerüljön.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-Ahhoz, hogy javítsd ezt, meg kell határozd, hogy melyik mappa tartalmazza az adataid. Általában ez a nagyobb (vagy legnagyobb) mappa a mappák közül. Mentsd és töröld a kisebb(ek)et, majd hozz létre egy Nintendo DSiWare mappát a megmaradtban, és mozgasd az F00D43D5.bin fájlt arra a helyre.
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
@@ -934,7 +948,59 @@ window.cookieconsent.initialise({Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.
+ +You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.
+ +Remember, your SD card should look like this:
+ +
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+ +Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+ +You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).
+ +If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.
+ +Mii Maker data was not found on the SD card. Start again from the beginning of Section I.
+ +Your SD card does not have enough space to trigger MSET9. Free up some space and try again.
+ +At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.
+ +You have multiple ID0 folders. To determine the correct folder, follow these instructions:
@@ -965,18 +1031,19 @@ window.cookieconsent.initialise({Full error messages:
-One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.
This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+You are trying to run the MSET9 script from a computer running macOS, which is not currently supported. Try running the script from a computer running Windows or Linux. If you do not have access to such a computer, you will need to follow an alternate exploit.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-mset9.py script on the root of the SD card
- mset9.bat
- +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
- -mset9.py script on the root of the SD card
- mset9.bat
- py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9mset9.py script on the root of the SD card
mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Entermset9.py script on the root of the SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET93, then press Enter to remove MSET9After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.
+In questa pagina eseguirai lo script di MSET9, che viene utilizzato per attivare MSET9. Se ricevi un errore numerato (es. Error 01) all’esecuzione dello script, puoi probabilmente trovarne la soluzione alla pagina Risoluzione dei problemi.
+In questa sezione preparerai i dati della scheda SD necessari per attivare l’exploit MSET9.
@@ -568,16 +570,10 @@ window.cookieconsent.initialise({
mset9.py nella directory principale della tua scheda SD
+ mset9.bat
- py -3 mset9. y e premi Inviomset9.batcd nella directory principale della tua scheda SD, quindi digita python3 mset9.py e premi Invio
1, quindi premi Invio per configurare MSET9
+ 1, quindi premi Invio per assicurarti che la console sia pronta per MSET9
mset9.py”)2, quindi premi Invio per attivare MSET9
+ mset9.batcd nella directory principale della tua scheda SD, quindi digita python3 mset9.py e premi Invio2, quindi premi Invio per iniettare MSET9
In questa sezione rimuoverai MSET9 per evitare problemi successivi. (Questo non rimuoverà il custom firmware che hai appena installato.)
-NON saltare questa sezione! Se lo fai, le applicazioni potrebbero inaspettatamente crashare e potresti riscontrare errori nella pagina successiva!
+NON saltare questa sezione! Se lo salti, le applicazioni potrebbero inaspettatamente crashare e riscontrerai errori nella pagina successiva!
4, quindi premi Invio per rimuovere MSET9
+ mset9.batcd nella directory principale della tua scheda SD, quindi digita python3 mset9.py e premi Invio3, quindi premi Invio per rimuovere MSET9
+ A questo punto, la console avvierà sempre Luma3DS.
@@ -701,7 +691,7 @@ window.cookieconsent.initialise({Did you follow Section IV (Removing MSET9)? That section is MANDATORY!
+Hai seguito la Sezione IV (Disinstallare MSET9)? Quella sezione è OBBLIGATORIA!
Questo può accadere se hai usato più schede SD su un 3DS e poi unito il contenuto delle diverse schede SD. Questo accade per evitare che dati validi in conflitto vengano uniti assieme.
+Questo si verifica quando utilizzi più schede SD con lo stesso 3DS e poi ne unisci insieme i contenuti. Entrambi sono “validi”, ma il 3DS può leggerne solo uno alla volta.
-Per risolvere questo problema, è necessario determinare quale cartella contiene i tuoi dati. Di solito, è la più grande tra le cartelle. Fai un backup ed elimina le cartelle più piccole, quindi crea una cartella Nintendo DSiWare in quella che rimane e sposta il file F00D43D5.bin in questa nuova cartella.
Dovrai determinare quale cartella contiene i tuoi dati. Prima di tutto, esegui il backup di tutte le cartelle, nel caso qualcosa vada storto:
+ +
Ora, elimina tutte le cartelle tranne una dalla tua scheda SD. Generalmente, dovresti eliminare le cartelle più piccole, in quanto quella con tutti i tuoi dati probabilmente peserà di più. Puoi verificare quale cartella occupa più spazio selezionandola col tasto destro e poi cliccando “Proprietà”:
+ +
Ora la tua scheda SD dovrebbe assomigliare a questa:
+ +
Ora, metti la tua scheda SD nel tuo 3DS e accendilo. Se i tuoi dati sono ancora lì, hai eliminato la cartella giusta e ora hai determinato il tuo ID1 corretto. Se invece è scomparso tutto, torna nella cartella di backup che hai fatto in precedenza e prova un’altra cartella.
@@ -930,7 +944,59 @@ window.cookieconsent.initialise({Python non è installato sul computer che stai utilizzando. Scaricalo dal sito di Python, fai doppio clic sull’installer e segui le istruzioni a schermo per installare Python. Una volta installato Python, riprova.
+ +Non stai eseguendo MSET9 dalla directory principale della scheda SD, oppure manca la cartella Nintendo 3DS.
+ +Ricorda, la tua scheda SD dovrebbe assomigliare a questo:
+ +
Se il contenuto della scheda SD è corretto, la scheda SD molto probabilmente non sta venendo letta dalla console. Ri-formattala (Windows, Linux), quindi ricomincia dall’inizio della Sezione I.
+ +La protezione da scrittura è abilitata su questa scheda SD. Se stai utilizzando una scheda SD standard, assicurati che il blocco sia impostato verso l’alto. Altrimenti, prova a espellere e reinserire la scheda SD.
+ +Hai inserito un numero diverso tra le diverse esecuzioni di MSET9 (per esempio, hai inizialmente selezionato l’opzione 1 per “Old 3DS, 11.8 - 11.17” e più tardi selezionato l’opzione 2 per “New 3DS, 11.8 - 11.17”).
+ +Se è successo durante la rimozione di MSET9, lo script ha già disinstallato automaticamente MSET9 e puoi continuare con la pagina successiva. Altrimenti, ricomincia dall’inizio della Sezione I.
+ +I dati del Centro di creazione Mii non sono stati trovati sulla scheda SD. Ricomincia dall’inizio della Sezione I.
+ +La tua scheda SD non ha abbastanza spazio per eseguire MSET9. Libera un po’ di spazio e riprova.
+ +Al termine di questa guida avrai bisogno di almeno 1.3GB di spazio per fare un backup della NAND, quindi è meglio liberarne almeno altrettanto.
+ +Hai più cartelle ID0. Per determinare la cartella corretta, segui queste istruzioni:
@@ -961,18 +1027,19 @@ window.cookieconsent.initialise({Messaggi di errore completi:
-Uno o più file necessari all’esecuzione di MSET9 mancano o sono corrotti. Ri-scarica il file Release .zip di MSET9 ed estrailo nella directory principale della tua scheda SD, sostituendo tutti i file esistenti, quindi riprova.
Questo accade quando non è presente alcun database valido dei titoli, di solito perché non hai mai installato alcun titolo da eShop su questa scheda SD.
La scheda SD può essere protetta dalla scrittura. Se stai utilizzando una scheda SD standard, assicurati che il blocco sia impostato verso l’alto. Altrimenti, prova a espellere e reinserire la scheda SD.
+Stai tentando di eseguire lo script di MSET9 da un computer che esegue macOS, attualmente non supportato. Prova ad eseguire lo script da un computer che esegue Windows o Linux. Se non hai accesso a uno di questi, dovrai seguire un exploit alternativo.
Questo può accadere quando l’opzione 1 viene interrotta a causa di un errore e ora si trova un’installazione incompleta.
+Questo si verifica quando utilizzi più schede SD con lo stesso 3DS e poi ne unisci insieme i contenuti. Entrambi sono “validi”, ma il 3DS può leggerne solo uno alla volta.
-mset9.py nella directory principale della tua scheda SD
- mset9.bat
- +Se non funziona: tieni premuto Maiusc e fai clic con il tasto destro del mouse in qualsiasi punto della finestra della scheda SD, quindi fai clic sull’opzione che apre il terminale, PowerShell o Prompt dei comandi, quindi digita py -3 mset9. y e premi Inviocd nella directory principale della tua scheda SD, quindi digita python3 mset9.py e premi Invio4, quindi premi Invio per rimuovere MSET9Dovrai determinare quale cartella contiene i tuoi dati. Prima di tutto, esegui il backup di tutte le cartelle, nel caso qualcosa vada storto:
+ +
Ora, elimina tutte le cartelle tranne una dalla tua scheda SD. Generalmente, dovresti eliminare le cartelle più piccole, in quanto quella con tutti i tuoi dati probabilmente peserà di più. Puoi verificare quale cartella occupa più spazio selezionandola col tasto destro e poi cliccando “Proprietà”:
+ +
Ora la tua scheda SD dovrebbe assomigliare a questa:
+ +
Ora, metti la tua scheda SD nel tuo 3DS e accendilo. Se i tuoi dati sono ancora lì, hai eliminato la cartella giusta e ora hai determinato il tuo ID1 corretto. Se invece è scomparso tutto, torna nella cartella di backup che hai fatto in precedenza e prova un’altra cartella.
Potrebbe mancarti il file SafeB9S.bin dalla directory principale della tua scheda SD, o il file potrebbe essere danneggiato. Copialo dalla cartella SDMC dell’archivio .zip di MSET9, sostituendo qualsiasi file esistente.
Potrebbe mancarti il file SafeB9S.bin dalla directory principale della tua scheda SD, o il file potrebbe essere danneggiato. Copialo dall’archivio .zip di MSET9, sostituendo qualsiasi file esistente.
Altrimenti, la scheda SD potrebbe essere formattata o partizionata in modo errato. Prova a riformattare la tua scheda SD: Windows, Linux (questo cancellerà i dati della tua scheda SD)
La tua scheda SD non ha i dati del Centro di creazione Mii, necessari per il funzionamento di questo exploit.
- -mset9.py nella directory principale della tua scheda SD
- mset9.bat
- py -3 mset9. y e premi Inviocd nella directory principale della tua scheda SD, quindi digita python3 mset9.py e premi Invio4, quindi premi Invio per rimuovere MSET9mset9.py nella directory principale della tua scheda SD
mset9.bat
- py -3 mset9. y e premi Inviomset9.batcd nella directory principale della tua scheda SD, quindi digita python3 mset9.py e premi Invio3, quindi premi Inviomset9.py nella directory principale della tua scheda SD
+ mset9.bat
- py -3 mset9. y e premi Inviomset9.batcd nella directory principale della tua scheda SD, quindi digita python3 mset9.py e premi Invio4, quindi premi Invio per rimuovere MSET93, quindi premi Invio per rimuovere MSET9Al termine della pagina di MSET9 dovresti tornare alla vecchia scheda SD prima di continuare con il Completamento dell’installazione.
+You didn’t remove MSET9 when prompted to. Follow Section IV - Removing MSET9, then re-run the script.
+Non hai rimosso MSET9 quando richiesto. Segui la Sezione IV - Rimozione di MSET9, quindi riesegui lo script.
On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the troubleshooting page.
+In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
@@ -568,16 +570,10 @@ window.cookieconsent.initialise({
mset9.py script on the root of your SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter
1, then press Enter to setup MSET9
+ 1, then press Enter to ensure your console is prepared for MSET9
mset9.py script”)2, then press Enter to trigger MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter2, then press Enter to inject MSET9
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
-Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
4, then press Enter to remove MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Enter to remove MSET9
+ 이제 콘솔은 Luma3DS를 기본으로 부팅 됩니다.
diff --git a/ko_KR/troubleshooting.html b/ko_KR/troubleshooting.html index 50eebd03db..0bb474d313 100644 --- a/ko_KR/troubleshooting.html +++ b/ko_KR/troubleshooting.html @@ -644,9 +644,23 @@ window.cookieconsent.initialise({
이전에 3DS에서 여러 개의 SD 카드를 사용했다가 하나의 SD 카드에 모든 내용을 합쳤을 때 이런 경우가 발생할 수 있습니다. 이는 충돌하는 유효한 데이터가 함께 병합되는 것을 방지하기 위해 수행됩니다.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-To fix this, you will need to determine which folder contains your data. 이것은 기본적으로 용량이 큰 (혹은 가장 큰) 폴더일 수 있습니다. 그 외의 나머지 폴더는 백업하신 후 지워주시고, 남은 폴더 안에 Nintendo DSiWare 폴더를 생성한 다음 F00D43D5.bin 파일을 생성한 폴더 안에 옮겨주세요.
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
@@ -930,7 +944,59 @@ window.cookieconsent.initialise({Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.
+ +You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.
+ +Remember, your SD card should look like this:
+ +
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+ +Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+ +You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).
+ +If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.
+ +Mii Maker data was not found on the SD card. Start again from the beginning of Section I.
+ +Your SD card does not have enough space to trigger MSET9. Free up some space and try again.
+ +At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.
+ +You have multiple ID0 folders. To determine the correct folder, follow these instructions:
@@ -961,18 +1027,19 @@ window.cookieconsent.initialise({Full error messages:
-One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.
This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+You are trying to run the MSET9 script from a computer running macOS, which is not currently supported. Try running the script from a computer running Windows or Linux. If you do not have access to such a computer, you will need to follow an alternate exploit.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-mset9.py script on the root of the SD card
- mset9.bat
- +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
- -mset9.py script on the root of the SD card
- mset9.bat
- py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9mset9.py script on the root of the SD card
mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Entermset9.py script on the root of the SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET93, then press Enter to remove MSET9After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.
+On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the troubleshooting page.
+In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
@@ -568,16 +570,10 @@ window.cookieconsent.initialise({
mset9.py script on the root of your SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter
1, then press Enter to setup MSET9
+ 1, then press Enter to ensure your console is prepared for MSET9
mset9.py script”)2, then press Enter to trigger MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter2, then press Enter to inject MSET9
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
-Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
4, then press Enter to remove MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Enter to remove MSET9
+ At this point, your console will boot to Luma3DS by default.
diff --git a/nl_NL/troubleshooting.html b/nl_NL/troubleshooting.html index 03bdb11d1f..32114a7874 100644 --- a/nl_NL/troubleshooting.html +++ b/nl_NL/troubleshooting.html @@ -644,9 +644,23 @@ window.cookieconsent.initialise({
This can occur if you’ve used multiple SD cards on a 3DS and then merged the contents of the SD cards together. This is done to prevent conflicting, valid data from being merged together.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-To fix this, you will need to determine which folder contains your data. Usually, this will be the larger (or largest) of the folders. Backup and delete the smaller one(s), then create a Nintendo DSiWare folder in the one that remains and move F00D43D5.bin to that location.
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
@@ -930,7 +944,59 @@ window.cookieconsent.initialise({Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.
+ +You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.
+ +Remember, your SD card should look like this:
+ +
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+ +Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+ +You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).
+ +If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.
+ +Mii Maker data was not found on the SD card. Start again from the beginning of Section I.
+ +Your SD card does not have enough space to trigger MSET9. Free up some space and try again.
+ +At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.
+ +You have multiple ID0 folders. To determine the correct folder, follow these instructions:
@@ -961,18 +1027,19 @@ window.cookieconsent.initialise({Full error messages:
-One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.
This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+You are trying to run the MSET9 script from a computer running macOS, which is not currently supported. Try running the script from a computer running Windows or Linux. If you do not have access to such a computer, you will need to follow an alternate exploit.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-mset9.py script on the root of the SD card
- mset9.bat
- +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
- -mset9.py script on the root of the SD card
- mset9.bat
- py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9mset9.py script on the root of the SD card
mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Entermset9.py script on the root of the SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET93, then press Enter to remove MSET9After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.
+On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the troubleshooting page.
+Nesta seção, você irá preparar os dados no seu cartão SD necessários para que o exploit MSET9 possa ser ativado.
@@ -568,16 +570,10 @@ window.cookieconsent.initialise({
mset9.py na raiz do seu cartão SD
+ mset9.bat
- py -3 mset9.py e pressione Entermset9.batcd até o root do seu cartão SD, então digite python3 mset9.py e pressione Enter
1, então pressione Enter para preparar o MSET9
+ 1, then press Enter to ensure your console is prepared for MSET9
mset9.py”)2, então pressione Enter para ativar o MSET9
+ mset9.batcd até o root do seu cartão SD, então digite python3 mset9.py e pressione Enter2, then press Enter to inject MSET9
Nesta seção, você irá remover o MSET9 para evitar erros futuros. (Isto não irá remover o custom firmware que você acabou de instalar.)
-NÃO pule esta seção! Se você o fizer, aplicativos podem ter um crash inesperado e você talvez encontre erros na próxima página!
+NÃO pule esta seção! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
4, então aperte Enter para remover o MSET9
+ mset9.batcd até o root do seu cartão SD, então digite python3 mset9.py e pressione Enter3, then press Enter to remove MSET9
+ A partir deste momento, o seu console iniciará no Luma3DS por padrão.
diff --git a/pt_BR/troubleshooting.html b/pt_BR/troubleshooting.html index 945c5abf0b..975df7bc5f 100644 --- a/pt_BR/troubleshooting.html +++ b/pt_BR/troubleshooting.html @@ -644,9 +644,23 @@ window.cookieconsent.initialise({
Isso pode ocorrer se você usou vários cartões SD em um 3DS e então mesclou os conteúdos dos cartões SD juntos. Isto é feito para evitar a fusão de dados contraditórios e válidos.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-Para corrigir isso, você precisará determinar qual pasta contém seus dados. Normalmente, será a maior das pastas. Faça backup e apague a(s) menor(es), então crie uma pasta Nintendo DSiWare no diretório que resta e mova o F00D43D5.bin para essa localização.
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
@@ -930,7 +944,59 @@ window.cookieconsent.initialise({Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.
+ +You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.
+ +Remember, your SD card should look like this:
+ +
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+ +Write-protection is enabled on this SD card. Se você está usando um cartão SD completo, certifique-se de que a alavanca está para cima. Caso contrário, tente ejetar e reinserir seu cartão SD.
+ +You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).
+ +If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.
+ +Mii Maker data was not found on the SD card. Start again from the beginning of Section I.
+ +Your SD card does not have enough space to trigger MSET9. Free up some space and try again.
+ +At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.
+ +Você tem múltiplas pastas ID0. Para determinar a pasta correta, siga estas instruções:
@@ -961,18 +1027,19 @@ window.cookieconsent.initialise({Mensagens de erro completas:
-One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.
Isto acontece por que nenhuma title database está presente, normalmente porque você nunca instalou nenhum aplicativo da eShop com este cartão SD.
Seu cartão SD pode estar bloqueado. Se você está usando um cartão SD completo, certifique-se de que a alavanca está para cima. Caso contrário, tente ejetar e reinserir seu cartão SD.
+You are trying to run the MSET9 script from a computer running macOS, which is not currently supported. Try running the script from a computer running Windows or Linux. If you do not have access to such a computer, you will need to follow an alternate exploit.
Isto pode acontecer quando Option 1 parou por conta de um erro e tem uma instalação incompleta.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-mset9.py na raiz do seu cartão SD
- mset9.bat
- +Se isso não funcionar: segure SHIFT e dê um clique direito em qualquer lugar da janela do cartão SD, então clique na opção que abra o Terminal, Powershell, ou Prompt de Comando, então digite py -3 mset9.py e pressione Entercd até o root do seu cartão SD, então digite python3 mset9.py e pressione Enter4, então pressione Enter para remover o MSET9You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
Talvez você esteja sem o SafeB9S.bin na raiz do seu cartão SD, ou o arquivo pode estar corrompido. Copie-o da pasta SDMC no .zip do MSET9, substituindo quaisquer arquivos existentes.
Talvez você esteja sem o SafeB9S.bin na raiz do seu cartão SD, ou o arquivo pode estar corrompido. Copy it from the MSET9 .zip, replacing any existing files.
Alternativamente, seu cartão SD pode estar sem a formatação apropriada ou mal particionado. Tente reformatar seu cartão SD: Windows, Linux (isto irá apagar seus dados do cartão SD)
Seu cartão SD não tem dados do Mii Maker, o qual é necessário para que esse exploit funcione.
- -mset9.py na raiz do seu cartão SD
- mset9.bat
- py -3 mset9.py e pressione Entercd até o root do seu cartão SD, então digite python3 mset9.py e pressione Enter4, então pressione Enter para remover o MSET9mset9.py na raiz do seu cartão SD
mset9.bat
- py -3 mset9.py e pressione Entermset9.batcd até o root do seu cartão SD, então digite python3 mset9.py e pressione Enter3, então presione Entermset9.py na raiz do seu cartão SD
+ mset9.bat
- py -3 mset9.py e pressione Entermset9.batcd até o root do seu cartão SD, então digite python3 mset9.py e pressione Enter4, então pressione Enter para remover o MSET93, then press Enter to remove MSET9After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.
+On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the troubleshooting page.
+In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
@@ -569,16 +571,10 @@ window.cookieconsent.initialise({
mset9.py script on the root of your SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter
1, then press Enter to setup MSET9
+ 1, then press Enter to ensure your console is prepared for MSET9
mset9.py script”)2, then press Enter to trigger MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter2, then press Enter to inject MSET9
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
-Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
4, then press Enter to remove MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Enter to remove MSET9
+ At this point, your console will boot to Luma3DS by default.
diff --git a/zh_CN/troubleshooting.html b/zh_CN/troubleshooting.html index ee1b5e96d7..4bf7a2c0fb 100644 --- a/zh_CN/troubleshooting.html +++ b/zh_CN/troubleshooting.html @@ -645,9 +645,23 @@ window.cookieconsent.initialise({
This can occur if you’ve used multiple SD cards on a 3DS and then merged the contents of the SD cards together. This is done to prevent conflicting, valid data from being merged together.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-To fix this, you will need to determine which folder contains your data. Usually, this will be the larger (or largest) of the folders. Backup and delete the smaller one(s), then create a Nintendo DSiWare folder in the one that remains and move F00D43D5.bin to that location.
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
@@ -932,7 +946,59 @@ window.cookieconsent.initialise({Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.
+ +You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.
+ +Remember, your SD card should look like this:
+ +
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+ +Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+ +You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).
+ +If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.
+ +Mii Maker data was not found on the SD card. Start again from the beginning of Section I.
+ +Your SD card does not have enough space to trigger MSET9. Free up some space and try again.
+ +At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.
+ +You have multiple ID0 folders. To determine the correct folder, follow these instructions:
@@ -963,18 +1029,19 @@ window.cookieconsent.initialise({Full error messages:
-One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.
This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+You are trying to run the MSET9 script from a computer running macOS, which is not currently supported. Try running the script from a computer running Windows or Linux. If you do not have access to such a computer, you will need to follow an alternate exploit.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-mset9.py script on the root of the SD card
- mset9.bat
- +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
- -mset9.py script on the root of the SD card
- mset9.bat
- py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9mset9.py script on the root of the SD card
mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Entermset9.py script on the root of the SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET93, then press Enter to remove MSET9After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.
+On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the troubleshooting page.
+In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
@@ -568,16 +570,10 @@ window.cookieconsent.initialise({
mset9.py script on the root of your SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter
1, then press Enter to setup MSET9
+ 1, then press Enter to ensure your console is prepared for MSET9
mset9.py script”)2, then press Enter to trigger MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter2, then press Enter to inject MSET9
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
-Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
4, then press Enter to remove MSET9
+ mset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Enter to remove MSET9
+ At this point, your console will boot to Luma3DS by default.
diff --git a/zh_TW/troubleshooting.html b/zh_TW/troubleshooting.html index 99a434f06f..85e2de41db 100644 --- a/zh_TW/troubleshooting.html +++ b/zh_TW/troubleshooting.html @@ -644,9 +644,23 @@ window.cookieconsent.initialise({
This can occur if you’ve used multiple SD cards on a 3DS and then merged the contents of the SD cards together. This is done to prevent conflicting, valid data from being merged together.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-To fix this, you will need to determine which folder contains your data. Usually, this will be the larger (or largest) of the folders. Backup and delete the smaller one(s), then create a Nintendo DSiWare folder in the one that remains and move F00D43D5.bin to that location.
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
@@ -930,7 +944,59 @@ window.cookieconsent.initialise({Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.
+ +You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.
+ +Remember, your SD card should look like this:
+ +
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+ +Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+ +You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).
+ +If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.
+ +Mii Maker data was not found on the SD card. Start again from the beginning of Section I.
+ +Your SD card does not have enough space to trigger MSET9. Free up some space and try again.
+ +At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.
+ +You have multiple ID0 folders. To determine the correct folder, follow these instructions:
@@ -961,18 +1027,19 @@ window.cookieconsent.initialise({Full error messages:
-One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.
This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
+You are trying to run the MSET9 script from a computer running macOS, which is not currently supported. Try running the script from a computer running Windows or Linux. If you do not have access to such a computer, you will need to follow an alternate exploit.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-mset9.py script on the root of the SD card
- mset9.bat
- +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
+ +
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
+ +
Your SD card should now look something like this:
+ +
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
- -mset9.py script on the root of the SD card
- mset9.bat
- py -3 mset9.py and press Entercd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET9mset9.py script on the root of the SD card
mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter3, then press Entermset9.py script on the root of the SD card
+ mset9.bat
- py -3 mset9.py and press Entermset9.batcd to the root of your SD card, then type python3 mset9.py and press Enter4, then press Enter to remove MSET93, then press Enter to remove MSET9After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.
+