New Crowdin translations (#1199)

2017-06-07 16:12:59 -04:00 · 2017-06-07 16:12:59 -04:00 · d180fb1ed8
commit d180fb1ed8
parent eae2b57a8b
95 changed files with 291 additions and 260 deletions
--- a/_pages/af_ZA/finalizing-setup.txt
+++ b/_pages/af_ZA/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/af_ZA/troubleshooting.txt
+++ b/_pages/af_ZA/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/ar_SA/finalizing-setup.txt
+++ b/_pages/ar_SA/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ar_SA/troubleshooting.txt
+++ b/_pages/ar_SA/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/ca_ES/finalizing-setup.txt
+++ b/_pages/ca_ES/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Si obteniu un error, establiu els vostres paràmetres DNS en "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ca_ES/troubleshooting.txt
+++ b/_pages/ca_ES/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/cs_CZ/finalizing-setup.txt
+++ b/_pages/cs_CZ/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/cs_CZ/troubleshooting.txt
+++ b/_pages/cs_CZ/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/da_DK/finalizing-setup.txt
+++ b/_pages/da_DK/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/da_DK/troubleshooting.txt
+++ b/_pages/da_DK/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/de_DE/finalizing-setup.txt
+++ b/_pages/de_DE/finalizing-setup.txt
@ -62,9 +62,9 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. Wenn dein Gerät eine Version zwischen 3.0.0 und (inklusive) 4.5.0 besitzt, wird dein Gerät nicht starten bis du die die nötige Firmware herunterlädst:
-  + Lade [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) herunter und nenne sie `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Lade dir [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) herunter
-  + Kopiere `firmware.bin` und `cetk` in den `/luma/` Ordner deiner SD-Karte
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Stecke deine SD-Karte nun wieder in deinen 3DS
 1. Schalte deine Konsole an
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/de_DE/troubleshooting.txt
+++ b/_pages/de_DE/troubleshooting.txt
@ -144,9 +144,10 @@ Browserbasierte Exploits (wie browserhax oder 2xrsa) sind oft instabil und stür
 1. Wenn du vorher bereits mit der Gateway-Flashkarte downgegraded hast, stelle sicher, dass du die neueste Luma3DS-Version (mindestens Version 6.2.3 oder höher) benutzt
 1. Wenn dein NAND zwischen Version 3.0.0 und 4.5.0 ist, mache folgendes:
    + Stelle sicher, dass du die neueste Version von Luma3DS nutzt (mindestens Version 6.6 oder höher)
-    + Lade [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) herunter und nenne sie `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Lade dir [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) herunter
-    + Kopiere `firmware.bin` und `cetk` in den `/luma/` Ordner deiner SD-Karte
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Lösche beide dieser Dateien nach dem das Update installiert wurde
 1. Versuche folgendes: [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Für Hilfe auf Englisch, frage auf dem [Nintendo Homebrew Discord](https://discord.gg/MWxPgEp).
--- a/_pages/el_GR/finalizing-setup.txt
+++ b/_pages/el_GR/finalizing-setup.txt
@ -62,9 +62,9 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) και μετονομάστε το σε `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Αντιγράψτε τα αρχεία `firmware.bin` and `cetk` στον φάκελο `/luma/` στην κάρτα SD
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/el_GR/troubleshooting.txt
+++ b/_pages/el_GR/troubleshooting.txt
@ -144,9 +144,10 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
 1. Εάν είχατε υποβαθμίσει προηγουμένως με την χρήση Gateway, βεβαιωθείτε ότι χρησιμοποιείτε την τελευταία έκδοση του Luma3DS (v6.2.3 και πάνω, τουλάχιστον)
 1. Εάν η NAND βρίσκεται μεταξύ των εκδόσεων 3.0.0 και 4.5.0, ακολουθήστε τα παρακάτω βήματα:
    + Βεβαιωθείτε ότι χρησιμοποιείτε την τελευταία έκδοση του Luma3DS (v6.6 και πάνω, τουλάχιστον)
-    Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) και μετονομάστε το σε `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Αντιγράψτε τα αρχεία `firmware.bin` and `cetk` στον φάκελο `/luma/` στην κάρτα SD
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/en_PT/finalizing-setup.txt
+++ b/_pages/en_PT/finalizing-setup.txt
@ -62,9 +62,9 @@ Durin' 'tis process, we also setup programs such as th' followin':
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/en_PT/troubleshooting.txt
+++ b/_pages/en_PT/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/es_ES/finalizing-setup.txt
+++ b/_pages/es_ES/finalizing-setup.txt
@ -62,9 +62,9 @@ Durante este proceso, también instalaremos programas como los siguientes:
  + Copia `boot.firm` a la raíz de tu tarjeta SD *(sobreescribiendo archivos existente)*
  + Sustituye este `boot.firm` con el de la [última versión de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) luego de actualizar tu consola más adelante en estas instrucciones
 1. Si tu consola está entre una versión entre 3.0.0 y 4.5.0 (inclusive), tu dispositivo no encenderá hasta que descargues manualmente el firmware requerido:
-  + Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) y cambia su nombre a `firmware.bin`
+  + Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) y cambia su nombre a `native.firm`
  + Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copia `firmware.bin` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
+  + Copia `native.firm` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
  + Borra ambos archivos después de actualizar tu dispositivo más adelante en estas instrucciones
 1. Vuelve a insertar tu tarjeta SD en tu consola
 1. Enciende tu consola
@ -82,7 +82,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
  + Si esto te da un error, ajusta tu configuración de DNS a "obtención automática"
  + Si esto te sigue dando un error y tu NAND está por debajo de 9.2.0, [sigue 9.2.0 CTRTransfer(9.2.0-ctrtransfer), luego reintenta actualizar
 1. Si tu consola estaba en una versión anterior a 9.0.0 antes de actualizar, reemplaza `boot.firm` en la raíz de tu tarjeta SD con el de la [última versión de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. Si tu consola estaba en una versión entre 3.0.0 y 4.5.0 antes de actualizar, elimina `firmware.bin` y `cetk` de la carpeta `/luma/` en tu tarjeta SD
+1. Si tu consola estaba en una versión entre 3.0.0 y 4.5.0 antes de actualizar, elimina `native.firm` y `cetk` de la carpeta `/luma/` en tu tarjeta SD

 ##### Sección III - Iniciar FBI

--- a/_pages/es_ES/troubleshooting.txt
+++ b/_pages/es_ES/troubleshooting.txt
@ -144,9 +144,10 @@ Los exploits basados en navegador (como browserhax o 2xrsa) son a menudo inestab
 1. Si previamente hiciste un downgrade con Gateway, asegúrate que la versión de Luma3DS que estés utilizando sea la mas reciente (v6.2.3 o superior)
 1. Si tu NAND es de una versión entre 3.0.0 y 4.5.0, realiza lo siguiente:
    + Asegúrate de estar usando la versión más reciente de Luma3DS (v6.6 o superior, por lo menos)
-    + Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) y cambia su nombre a `firmware.bin`
+    + Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) y cambia su nombre a `native.firm`
    + Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copia `firmware.bin` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
+    + Copia `native.firm` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
+    + Si tienes una versión de Luma3DS 7.1 o inferior, renombra `native.firm` a `firmware.bin`
    + Elimina ambos archivos después de actualizar tu consola
 1. Prueba siguiendo [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Pide ayuda (*en inglés*) en el [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp)
--- a/_pages/fi_FI/finalizing-setup.txt
+++ b/_pages/fi_FI/finalizing-setup.txt
@ -62,9 +62,9 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Lataa [tämä tiedosto](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ja uudelleennimeä se muotoon `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Lataa [tämä tiedosto](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Kopioi `firmware.bin` ja `cetk` SD-korttisi `/luma/`-kansioon
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Aseta SD-korttisi takaisin konsoliisi
 1. Käynnistä konsolisi
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Jos saat virheen, laita DNS:n automaattinen haku (Auto-Obtain DNS) päälle asetuksista
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/fi_FI/troubleshooting.txt
+++ b/_pages/fi_FI/troubleshooting.txt
@ -144,9 +144,10 @@ Selainhaavoittuvuuksiin perustuvat käynnistystavat (kuten browserhax ja 2xrsa)
 1. Jos olet aikaisemmin päivittänyt taaksepäin Gatewayn avulla, varmista, että käytät Luma3DS:n viimeisintä versiota (v6.2.3 tai uudempi)
 1. Jos NANDisi versio on jotakin 3.0.0:n ja 4.5.0:n väliltä, tee seuraavat toimet:
    + Varmista, että käytät Luma3DS:n viimeisintä versiota (v6.6 tai uudempi)
-    + Lataa [tämä tiedosto](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ja uudelleennimeä se muotoon `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Lataa [tämä tiedosto](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Kopioi `firmware.bin` ja `cetk` SD-korttisi `/luma/`-kansioon
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Poista kummatkin tiedostot päivitettyäsi konsolin
 1. Kokeile seurata osiota [9.2.0-CTRTransfer](9.2.0-crtransfer)
 1. Kysy apua (englanniksi) [Nintendo Homebrew -palvelimelta Discordissa](https://discord.gg/MWxPgEp).
--- a/_pages/fr_FR/finalizing-setup.txt
+++ b/_pages/fr_FR/finalizing-setup.txt
@ -16,7 +16,7 @@ Durant cette étape, nous allons également configurer les programmes suivants :
 + **Themely** *(Permet d'installer des thèmes customisés)*
 +  **Luma3DS Updater** *(Permet de mettre facilement à jour votre CFW)*
 +  **GodMode9** *(Programme multifonction qui peut effectuer des opérations relatives à la NAND et aux cartouches)*
-+  **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
+  **Homebrew Launcher Loader** *(Permet de lancez l'Homebrew Launcher comme une application normale grâce à Rosalina Magic)*

 {% endcapture %}

@ -38,7 +38,7 @@ Durant cette étape, nous allons également configurer les programmes suivants :

 1. Éteignez votre 3DS
 1. Insérez votre carte SD dans votre ordinateur
-1. Copy `boot.3dsx` to the root of your SD card *(overwrite existing files)*
+1. Copiez 'boot.3dsx' à la racine de votre carte SD *(En écrasant les fichiers existants)*
 1. Copiez `FBI.3dsx` dans le dossier `/3ds/` de votre carte SD
 1. Créez un dossier nommé "files9" à la racine de votre carte SD si celui ci n'existe pas
 1. Créez un dossier nommé `hblauncherloader` à la racine de votre carte SD si celui-ci n'existe pas déjà
@ -57,14 +57,14 @@ Durant cette étape, nous allons également configurer les programmes suivants :
    ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
    {: .notice--info}

-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/cf0b05e/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
+1. Si votre console possède un firmware antérieur à 9.0.0, votre console ne démarra pas sauf si vous utilisez une version alternative de Luma3DS:
+  + Téléchargez [Une ancienne version de Luma3DS]({{ base_path }}/luma_legacy/cf0b05e/boot.firm)
+  + Copiez `boot.firm` à la racine de votre carte SD *(En écrasant les fichiers existants)*
+  + Remplacez le `boot.firm` avec celui de [la dernière version de Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) après avoir mis à jour votre console plus tard dans ce guide
 1. Si votre appareil est sur une version entre 3.0.0 à 4.5.0 (inclue), votre appareil ne démarrera pas jusqu'à ce que vous téléchargiez manuellement le firmware requis :
  + Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) et renommez-le "firmware.bin"
  + Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copiez les fichiers `firmware.bin` et `cetk` dans le dossier `/luma/` de votre carte SD
+  Copiez `native.firm` et `cetk` au dossier `/luma/` dans ta carte SD
  + Supprimez ces deux fichiers après avoir mit à jour votre console plus loin dans ce mode d’emploi
 1. Réinsérez votre carte SD dans votre 3DS
 1. Allumez à présent votre 3DS
@ -81,13 +81,13 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou
  + Mettre à jour tout en utilisant B9S + Luma (ce que vous avez) sont sans danger
  + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique"
  + Si cela vous donne encore une erreur et que votre NAND est en dessous de 9.2.0, [suivez 9.2.0 CTRTransfer](9.2.0-ctrtransfer), puis essayez de mettre à jour à nouveau
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. Si votre console était dans un fimware antérieur à 9.0.0 avant la mise à jour, remplacez `boot.firm` à la racine de votre carte SD avec celui de [la dernière version de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+1. Si votre console était dans un firmware compris entre 3.0.0 et 4.5.0 avant la mise à jour, Supprimez `native.firm` et `cetk` de votre dossier `/luma/`sur votre carte SD

 ##### Section III - Lancez FBI

 1. Lancez l’application Mode téléchargement
-1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu
+1. Appuyez simultanément sur (L) + (Bas) + (Select) pour ouvrir le menu Rosalina
 1. Sélectionnez "Miscellaneous options"
 1. Sélectionnez "Switch the hb. title to the current app."
 1. Appuyez sur (B) pour continuer
@ -159,7 +159,7 @@ Votre console démarrera désormais Luma3DS CFW SysNAND (c'est-à-dire sur votre
 Vous pouvez maintenir (Select) lors du démarrage pour entrer dans le menu de configuration de Luma3DS.    
 Vous pouvez maintenant maintenir (Start) au démarrage pour lancer le menu de chainloader Luma3DS (Notez que le menu du chainloader Luma3DS ne s’affiche que s’il détecte plus d'un payload).    
 Vous pouvez maintenant maintenir (Start) + (Select) + (X) au démarrage pour dump le bootrom ARM11 (`boot11.bin`), le bootrom ARM9 (`boot9.bin`) et l'OTP unique de votre console (`OTP.bin`) dans le dossier `/boot9strap/` de votre carte SD (Notez que cela n'affichera aucune notification).    
-You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
+Vous pouvez maintenant appuyer simultanément sur (L) + (Bas) + (Select) pour démarrer le menu Rosalina intégré à Luma3DS. Pour une liste plus complète des fonctionnalités de Rosalina, vous pouvez vous rendre sur [la page GitHub de Luma3DS v8.0](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
 {% endcapture %}

 <div class="notice--info">{{ notice-6 | markdownify }}</div>
--- a/_pages/fr_FR/get-started-(new-3ds).txt
+++ b/_pages/fr_FR/get-started-(new-3ds).txt
@ -56,7 +56,7 @@ La version de votre console peut être trouvée en bas à droite de l'écran sup
    </tr>
    <tr>
      <td style="text-align: center; font-weight: bold;" colspan="2">TOUTES LES VERSIONS <br></td>
-      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installing boot9strap (ntrboothax)</a><br><sub>(Requires a Compatible Flashcart)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installing boot9strap (Hardmod)</a><br><sub>(Requires Soldering)</sub></p></td>
+      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installer boot9strap (ntrboothax)</a><br><sub>(Nécessite un Linker compatible)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">ou</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installation boot9strap (Hardmod)</a><br><sub>(Nécessite de la soudure)</sub></p></td>
    </tr>
  </tbody>
 </table>
--- a/_pages/fr_FR/get-started-(old-3ds).txt
+++ b/_pages/fr_FR/get-started-(old-3ds).txt
@ -103,7 +103,7 @@ La version de votre console peut être trouvée en bas à droite de l'écran sup
    </tr>
    <tr>
      <td style="text-align: center; font-weight: bold;" colspan="2">TOUTES LES VERSIONS <br></td>
-      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installing boot9strap (ntrboothax)</a><br><sub>(Requires a Compatible Flashcart)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installing boot9strap (Hardmod)</a><br><sub>(Requires Soldering)</sub></p></td>
+      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installer boot9strap (ntrboothax)</a><br><sub>(Nécessite un Linker compatible)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">ou</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installation boot9strap (Hardmod)</a><br><sub>(Nécessite de la soudure)</sub></p></td>
    </tr>
  </tbody>
 </table>
--- a/_pages/fr_FR/get-started.txt
+++ b/_pages/fr_FR/get-started.txt
@ -26,7 +26,7 @@ Avant de commencer, les utilisateurs de Windows devraient permettre d'afficher l
 Avant de commencer, assurez vous que votre carte SD n'a pas d'erreurs en utilisant [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), ou [F3X (Mac)](f3x-(mac))!
 {: .notice--warning}

-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! Cela inclut des consoles des régions CHN et TWN qui étaient précédemment impiratables !
+Notez bien que les nouvelles méthodes [ntrboothax](installing-boot9strap-(ntrboothax)) et [hardmod](installing-boot9strap-(hardmod)) fonctionnent dans *tous appareils, régions, et versions*! Cela inclut des consoles des régions CHN et TWN qui étaient précédemment impiratables !
 {: .notice--success}

 {% capture notice-1 %}
--- a/_pages/fr_FR/installing-boot9strap-(2xrsa).txt
+++ b/_pages/fr_FR/installing-boot9strap-(2xrsa).txt
@ -46,7 +46,7 @@ title: "Installer boot9strap (2xrsa)"
 1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:    
  + **"Show NAND or user string in System Settings"**
 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-  + If you get an error, just continue the next page
+  + Si vous obtenez une erreur, continuez à la prochaine page

 ___

--- a/_pages/fr_FR/installing-boot9strap-(browser).txt
+++ b/_pages/fr_FR/installing-boot9strap-(browser).txt
@ -50,7 +50,7 @@ Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une E
 1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:    
  + **"Show NAND or user string in System Settings"**
 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-  + If you get an error, just continue the next page
+  + Si vous obtenez une erreur, continuez à la prochaine page

 ___

--- a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
@ -165,7 +165,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
 1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:    
  + **"Show NAND or user string in System Settings"**
 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-  + If you get an error, just continue the next page
+  + Si vous obtenez une erreur, continuez à la prochaine page

 ___

--- a/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
@ -181,7 +181,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
 1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:    
  + **"Show NAND or user string in System Settings"**
 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-  + If you get an error, just continue the next page
+  + Si vous obtenez une erreur, continuez à la prochaine page

 ___

--- a/_pages/fr_FR/installing-boot9strap-(hardmod).txt
+++ b/_pages/fr_FR/installing-boot9strap-(hardmod).txt
@ -2,7 +2,7 @@
 title: "Installer boot9strap (Hardmod)"
 ---

-Un excellent guide pour obtenir un hardmod se trouve [ici](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
+Un excellent guide pour obtenir un hardmod se trouve [ici](https://gbatemp.net/threads/414498/). Si vous avez une New 3DS, lisez [cette page](https://github.com/Plailect/Guide/issues/681) et [cette page](https://github.com/Plailect/Guide/issues/1185) avant de modifier ta 3DS.
 {: .notice--info}

 Ceci est une implémentation de l'exploit "FIRM partitions known-plaintext" qui est décrit [ici](https://www.3dbrew.org/wiki/3DS_System_Flaws).
@ -82,7 +82,7 @@ Cela fonctionne sur la New3DS, Old3DS Old2DS sur *toutes* les versions pour lesq
 1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:    
  + **"Show NAND or user string in System Settings"**
 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-  + If you get an error, just continue the next page
+  + Si vous obtenez une erreur, continuez à la prochaine page

 ___

--- a/_pages/fr_FR/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/fr_FR/installing-boot9strap-(homebrew-launcher).txt
@ -57,7 +57,7 @@ Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une E
 1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:    
  + **"Show NAND or user string in System Settings"**
 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-  + If you get an error, just continue the next page
+  + Si vous obtenez une erreur, continuez à la prochaine page

 ___

--- a/_pages/fr_FR/installing-boot9strap-(mset).txt
+++ b/_pages/fr_FR/installing-boot9strap-(mset).txt
@ -51,7 +51,7 @@ Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une E
 1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:    
  + **"Show NAND or user string in System Settings"**
 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-  + If you get an error, just continue the next page
+  + Si vous obtenez une erreur, continuez à la prochaine page

 ___

--- a/_pages/fr_FR/installing-boot9strap-(ntrboothax).txt
+++ b/_pages/fr_FR/installing-boot9strap-(ntrboothax).txt
@ -1,23 +1,23 @@
 ---
-title: "Installing boot9strap (ntrboothax)"
+title: "Installer boot9strap (ntrboothax)"
 ---

-This is a placeholder page for the upcoming "ntrboothax" exploit.
+Ceci est une page réservée pour le prochain exploit, ntrboothax.
 {: .notice--primary}

 {% capture notice-1 %}

-The ntrboothax exploit will require the following:
+Le programme ntrboothax nécessitera:

-+ A DS / DSi flashcart
-  + Exact flashcart compatibility will be added when this exploit is released
-+ A small magnet
-  + Note that this is only required on folding style 3DSs, not 2DSs
-  + This is because the exploit requires your device to enter sleep mode while still having access to the buttons
-  + The magnet should be able to trigger your device's sleep mode by holding it on or around the ABXY buttons
-+ *One* of the following methods of installing ntrboothax to your flashcart:
-  + A [Powersaves](https://amzn.to/2fb3VY7)
-  + Another 3DS or 2DS already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ Un Linker DS / DSi
+  + Un récapitulatif de la compatibilité avec chaque flashcart sera ajouté lorsque l'exploit sera dévoilé
+ Un petit aimant
+  + Notez que cela est uniquement nécessaire pour les modèles de 3DS pliantes, pas 2DS
+  + C'est parce que l'exploit demande de mettre la console en veille tout en ayant accès aux boutons
+  + L’aimant doit être en mesure de déclencher le mode veille de votre console en le tenant sur ou autour des boutons ABXY
+ *Une* des méthodes suivantes pour installer ntrboothax pour votre linker:
+  + Une [Powersaves] (https://amzn.to/2fb3VY7)
+  + Une autre 3DS ou 2DS exécute déjà une sorte de custom firmware (comme boot9strap ou arm9loaderhax)

 {% endcapture %}

--- a/_pages/fr_FR/site-navigation.txt
+++ b/_pages/fr_FR/site-navigation.txt
@ -41,7 +41,7 @@ sitemap: false
 + [Installer boot9strap (Hardmod)](installing-boot9strap-(hardmod))
 + [Installer boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
 + [Installer boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
+ [Installer boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
 + [Déplacer l'EmuNAND](move-emunand)
 + [NTR et Clubic Ninja](ntr-and-cubic-ninja)
 + [Changement de Région](region-changing)
--- a/_pages/fr_FR/troubleshooting.txt
+++ b/_pages/fr_FR/troubleshooting.txt
@ -144,9 +144,10 @@ Les exploits basé sur le navigateur (tel que browserhax ou 2xrsa) sont parfois
 1. Si vous avez auparavant réalisé un downgrade via Gateway, assurez-vous que vous utilisez la dernière version de Luma3DS (v6.2.3 ou plus récent, au minimum)
 1. Si votre NAND est entre la version 3.0.0 et 4.5.0, faites ceci :
    + Assurez-vous d'utiliser la dernière version de Luma3DS (v6.6 ou plus, au moins)
-    + Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) et renommez-le en `firmware.bin`
+    + Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) et renommez-le `native.firm`
    + Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copiez `firmware.bin` et`cetk` dans le répertoire `/luma/` sur votre carte SD
+    + Copiez `native.firm` et `cetk` au dossier `/luma/` dans ta carte SD
+    + Si vous avez la version 7.1 de Luma3DS ou inférieur. renommez le fichier `native.firm` en `firmware.bin`
    + Supprimez ces deux fichiers après avoir mis à jour de votre console
 1. Essayer de réaliser le [CTRtransfer en 9.2.0](9.2.0-ctrtransfer)
 1. Pour obtenir de l'aide, demandez de l'aide à [Nintendo Homebrew sur Discord(Anglais)](https://discord.gg/MWxPgEp).
--- a/_pages/fr_FR/updating-b9s.txt
+++ b/_pages/fr_FR/updating-b9s.txt
@ -2,10 +2,10 @@
 title: "Mettre à jour B9S"
 ---

-This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
+Cette page s'adresse aux utilisateurs de boot9strap déjà présent sur leurs console afin de le mettre à jour vers la dernière version.
 {: .notice--info}

-Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
+Notez bien que la récent version majeure de Luma3DS n'est pas compatible avec la version 1.0 de boot9strap. Cela *nécessite* que vous mettez à jour votre installation de boot9strap vers la version 1.2 en suivant les instructions de cette page.
 {: .notice--warning}

 {% capture notice-1 %}
@ -41,7 +41,7 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants

 1. Éteignez votre 3DS
 1. Insérez votre carte SD dans votre ordinateur
-1. **Leave the old (v7.1) version of Luma3DS (`boot.firm`) as it is. You will update this later.**
+1. **Laissez le (`boot.firm`) de l'ancienne version de Luma3DS (v7.1) tel qu'il est. Vous le mettrez à jour plus tard.**
 1. Copiez `boot.3dsx` à la racine de votre carte SD
 1. Créez un dossier à la racine de votre carte SD nommé `boot9strap`
 1. Copiez le fichier `GodMode9.firm` de l'archive GodMode9 `.zip` dans le dossier `/luma/payloads/` sur votre carte SD
@ -57,7 +57,7 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants
 1. Quand cela est demandé, appuyez sur la combinaison de boutons donnée pour installer boot9strap
 1. Une fois que c'est fini, appuez sur (A) pour redémarrer l'appareil.
 1. Éteignez votre 3DS
-  + Note that you will receive the error `Unsupported launcher (argc = 0)` until you follow the rest of the instructions on this page
+  + Notez que vous recevrez l'erreur `Unsupported launcher (argc = 0)` jusqu'à ce que vous suivez le reste des instructions sur cette page

 ##### Section III - Mettre à jour Luma3DS

@ -109,5 +109,5 @@ ___
 Notez que les fichiers `.bak` dans le dossier `/boot9strap/` sur votre carte SD sont uniquement nécessaires dans le cas où une installation de boot9strap aurait échoué. Une fois que vous avez terminé l'installation, vous pouvez supprimer le dossier `boot9strap`.
 {: .notice--info}

-You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
+Vous pouvez maintenant appuyer simultanément sur (L) + (Bas) + (Select) pour démarrer le menu Rosalina intégré à Luma3DS. Pour une liste plus complète des fonctionnalités de Rosalina, vous pouvez vous rendre sur [la page GitHub de Luma3DS v8.0](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
 {: .notice--info}
--- a/_pages/he_IL/finalizing-setup.txt
+++ b/_pages/he_IL/finalizing-setup.txt
@ -62,9 +62,9 @@ title: "סיום התהליך"
  + תעתיקו את `boot.firm` אל שורש כרטיס הSD שלכם *(תשכתבו את הקובץ הקיים אם יש)*
  + תחליפו את ה`boot.firm` הזה עם זה מ[הגרסה העדכנית של Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) אחרי שאתם מעדכנים את הקונסולה מאוחר יותר בהוראות
 1. אם המכשיר שלכם הוא על גרסה בין 3.0.0 ל-4.5.0, המכשיר שלכם שלכם לא יאתחל עד שתורידו את הקושחה המתאימה:
-  תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ושנו לו את השם ל-`firmware.bin`
+  תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ושנו לו את השם ל-`native.firm`
  + תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + תעתיקו את `firmware.bin` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
+  + תעתיקו את `native.firm` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
  + תמחקו את שני הקבצים האלו אחרי שאתם מעדכנים את המכשיר שלכם אחר כך בהוראות
 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
 1. תפעילו את המכשיר
@ -82,7 +82,7 @@ title: "סיום התהליך"
  + אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
  + אם זה ממשיך לתת לכם שגיאה והקונסולה שלכם מתחת לגרסה 9.2.0, עקבו אחרי [9.2.0 CTRtransfer](9.2.0-ctrtransfer), ואז תנסו לעדכן שוב
 1. אם הקונסולה שלכם הייתה מתחת לגרסה 9.0.0 לפני שעדכנתם אותה, תחליפו את ה`boot.firm` על שורש כרטיס הSD שלכם עם זה מ[הגרסה העדכנית של Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. אם הקונסולה שלכם הייתה על גרסה בין 3.0.0 ו4.5.0 לפני שעדכנתם, תמחקו את `firmware.bin` ואת `cetk` מתיקיית `/luma/` בכרטיס הSD שלכם
+1. אם הקונסולה שלכם הייתה על גרסה בין 3.0.0 ו4.5.0 לפני שעדכנתם, תמחקו את `native.firm` ואת `cetk` מתיקיית `/luma/` בכרטיס הSD שלכם

 ##### חלק III - הפעלת FBI

--- a/_pages/he_IL/troubleshooting.txt
+++ b/_pages/he_IL/troubleshooting.txt
@ -146,9 +146,10 @@ title: "פתרון בעיות"
 1. אם שנמכתם עם Gateway, תבדקו שאתם משתמשים בגרסה העדכנית של Luma3DS, לפחות 6.2.3
 1. אם הNAND שלכם היה בין הגרסאות 3.0.0 ו4.5.0 תעשו את זה:
    תבדקו שאתם משתמשים בגרסה העדכנית של Luma3DS, לפחות 6.6
-    תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ושנו לו את השם ל-`firmware.bin`
+    תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ושנו לו את השם ל-`native.firm`
    + תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + תעתיקו את `firmware.bin` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
+    + תעתיקו את `native.firm` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
+    + אם יש לכם את Luma3DS בגרסה 7.1 או נמוך יותר, תשנו את השם של `native.firm` אל`firmware.bin`
    + תמחקו את שני הקבצים האלו לאחר שתעדכנו את ה-3DS שלכם
 1. תנסו לעקוב אחרי [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. תבקשו עזרה ב[Nintendo Homebrew על Discord](https://discord.gg/MWxPgEp).
--- a/_pages/hu_HU/finalizing-setup.txt
+++ b/_pages/hu_HU/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/hu_HU/troubleshooting.txt
+++ b/_pages/hu_HU/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/id_ID/finalizing-setup.txt
+++ b/_pages/id_ID/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/id_ID/troubleshooting.txt
+++ b/_pages/id_ID/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/it_IT/finalizing-setup.txt
+++ b/_pages/it_IT/finalizing-setup.txt
@ -62,9 +62,9 @@ Durante la guida verranno anche configurate le seguenti applicazioni:
  + Copia il file `boot.firm` nella directory principale della tua scheda SD *(sovrascrivendo eventualmente qualunque file già presente)*
  + Sostituisci questo file `boot.firm` con quello dell'[ultima versione di Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) dopo aver aggiornato la console seguendo le istruzioni riportate nelle sezioni successive
 1. Se la tua console è ad una versione del software compresa tra 3.0.0 e 4.5.0 (incluse), non si avvierà finché non avrai scaricato manualmente la versione del software richiesta:
-  + Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e rinominalo `firmware.bin`
+  + Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e rinominalo `native.firm`
  + Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copia i file `firmware.bin` e `cetk` nella cartella `/luma/` della tua scheda SD
+  + Copia i file `native.firm` e `cetk` nella cartella `/luma/` della tua scheda SD
  + Elimina entrambi i file dopo aver aggiornato la console nel relativo passaggio di questa sezione
 1. Reinserisci la scheda SD nel Nintendo 3DS
 1. Accendi la console
@ -82,7 +82,7 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
  + Se ottieni un errore, imposta i DNS della connessione di rete in modo che vengano ottenuti automaticamente
  + Se continui ad ottenere un errore e la tua NAND è ad una versione precedente di 9.2.0, [segui la guida per il CTRTransfer 9.2.0](9.2.0-ctrtransfer), poi riprova ad aggiornare la console
 1. Se la tua console era ad una versione del sistema inferiore a 9.0.0 prima dell'aggiornamento, sostituisci il file `boot.firm` nella directory principale della tua scheda SD con quello dell'[ultima versione di Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. Se la tua console era ad una versione del sistema compresa tra 3.0.0 e 4.5.0 prima dell'aggiornamento, elimina i file `firmware.bin` e `cetk` dalla cartella `/luma/` sulla tua scheda SD
+1. Se la tua console era ad una versione del sistema compresa tra 3.0.0 e 4.5.0 prima dell'aggiornamento, elimina i file `native.firm` e `cetk` dalla cartella `/luma/` sulla tua scheda SD

 ##### Sezione III - Avviare FBI

--- a/_pages/it_IT/troubleshooting.txt
+++ b/_pages/it_IT/troubleshooting.txt
@ -144,9 +144,10 @@ Questo tipo di exploit (come browserhax o 2xrsa) è instabile e tende a crashare
 1. Se in precedenza hai effettuato un downgrade tramite Gateway, assicurati di stare utilizzando l'ultima versione di Luma3DS (almeno v6.2.3)
 1. Se la versione di sistema della tua NAND è compresa tra 3.0.0 e 4.5.0, devi seguire i seguenti passaggi:
    + Assicurati di stare utilizzando l'ultima versione di Luma3DS (almeno v6.6)
-    + Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e rinominalo `firmware.bin`
+    + Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e rinominalo `native.firm`
    + Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copia i file `firmware.bin` e `cetk` nella cartella `/luma/` della tua scheda SD
+    + Copia i file `native.firm` e `cetk` nella cartella `/luma/` della tua scheda SD
+    + Se la versione di Luma3DS è 7.1 o inferiore, rinomina il file `native.firm` in `firmware.bin`
    + Elimina entrambi i file dopo aver aggiornato la tua console
 1. Prova ad eseguire un [CTRTransfer 9.2.0](9.2.0-ctrtransfer)
 1. Chiedi aiuto su [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp) (in inglese).
--- a/_pages/ja_JP/finalizing-setup.txt
+++ b/_pages/ja_JP/finalizing-setup.txt
@ -62,9 +62,9 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + [このファイル](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)をダウンロードし、名前を`firmware.bin`に変更します
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + [このファイル](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)をダウンロードします
-  + `firmware.bin`と`cetk`をSDカードの`/luma/`フォルダにコピーします
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + エラーが発生すれば、DNS設定を「自動」に変更してください
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ja_JP/troubleshooting.txt
+++ b/_pages/ja_JP/troubleshooting.txt
@ -144,9 +144,10 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
 1. Gatewayでダウングレードしたことがある場合、最新バージョンのLuma3DSを持っていることを確保します（少なくともv6.2.3またはそれ以降）
 1. NANDのバージョンは3.0.0と4.5.0の範囲内にある場合、下記の指示に従います：
    + 最新バージョンのLuma3DSを使用していることを確保します（少なくともv6.6またはそれ以降）
-    + [このファイル](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)をダウンロードし、名前を`firmware.bin`に変更します
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + [このファイル](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)をダウンロードします
-    + `firmware.bin`と`cetk`をSDカードの`/luma/`フォルダにコピーします
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/ko_KR/finalizing-setup.txt
+++ b/_pages/ko_KR/finalizing-setup.txt
@ -62,9 +62,9 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + 이 [파일](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)을 다운로드받고 이름을 `firmware.bin`으로 바꿔 주세요.
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + 이 [파일](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)을 다운로드해 주세요.
-  + `firmware.bin`과 `cetk`를 SD 카드의 `/luma/` 폴더에 복사해 주세요.
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. SD 카드를 기기에 다시 삽입해 주세요.
 1. 기기를 시작해 주세요.
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + 오류가 발생한다면, DNS 설정을 "자동"으로 설정해 주세요.
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ko_KR/troubleshooting.txt
+++ b/_pages/ko_KR/troubleshooting.txt
@ -145,9 +145,10 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
 1. Gateway를 통해 다운그레이드한 적이 있다면 Luma3DS가 최신 버전 (v6.2.3 또는 그 이상)인지 확인해 주세요.
 1. 3.0.0~4.5.0 버전이라면, 다음 과정을 수행해 주세요:
    + Luma3DS가 최신 버전 (v6.6 또는 그 이상)인지 확인해 주세요.
-    + 이 [파일](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)을 다운로드받고 이름을 `firmware.bin`으로 바꿔 주세요.
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + 이 [파일](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)을 다운로드해 주세요.
-    + `firmware.bin`과 `cetk`를 SD 카드의 `/luma/` 폴더에 복사해 주세요.
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + 기기를 업데이트한 뒤 두 파일을 삭제해 주세요.
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/ms_MY/finalizing-setup.txt
+++ b/_pages/ms_MY/finalizing-setup.txt
@ -62,9 +62,9 @@ Semasa proses ini, kami juga akan memasang program-program berikut:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Muat turun [fail ini](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) dan tukar namanya kepada `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Muat turun [fail ini](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Salin `firmware.bin` dan `cetk` letakkan ke folder `/luma/` pada kad SD anda
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Jika terdapat error, set DNS settings anda ke "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ms_MY/troubleshooting.txt
+++ b/_pages/ms_MY/troubleshooting.txt
@ -144,9 +144,10 @@ Exploitasi berdasarkan browser (seperti browserhax atau 2xrsa) kebiasaannya tida
 1. Jika sebelum ini anda downgrade menggunakan Gateway, sila pastikan anda menggunakan versi Luma3DS terkini (v6.2.3 atau tinggi, sekurang-kurangnya)
 1. Jika versi NAND anda antara 3.0.0 dan 4.5.0, buat seperti berikut:
    + Pastikan anda menggunakan versi Luma 3ds terikini (v6.6 atau tinggi, sekurang-kurangnya)
-    + Muat turun [fail ini](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) dan tukar namanya kepada `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Muat turun [fail ini](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Salin `firmware.bin` dan `cetk` letakkan ke folder `/luma/` pada kad SD anda
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/nl_NL/finalizing-setup.txt
+++ b/_pages/nl_NL/finalizing-setup.txt
@ -62,9 +62,9 @@ Tijdens dit proces zullen we ook de volgende programma's installeren:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) en hernoem het bestand naar `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Kopieer `firmware.bin` en `cetk` naar de `/luma/` map op je SD kaart
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Stop je SD kaart terug in je 3DS
 1. Zet je 3DS aan
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Als dit je een foutmelding geeft, zet dan je DNS instellingen op "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/nl_NL/troubleshooting.txt
+++ b/_pages/nl_NL/troubleshooting.txt
@ -144,9 +144,10 @@ Op de browser gebaseerde exploits (zoals browserhax or 2xrsa) zijn vaak erg onst
 1. Als je voorheen met Gateway de 3DS hebt gedowngrade, zorg er dan voor dat je de laatste Luma3DS-versie gebruikt (op het minst v6.2.3 of hoger)
 1. Als je NAND een versie tussen 3.0.0 en 4.5.0 heeft, doe het volgende:
    + zorg ervoor dat je de laatste Luma3DS-versie (ten minste v6.6 or hoger)
-    + Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) en hernoem het bestand naar `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Kopieer `firmware.bin` en `cetk` naar de `/luma/` map op je SD kaart
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Verwijder beide bestanden na het updaten van je 3DS
 1. Probeer de [9.2.0 ctrtransfer](9.2.0-ctrtransfer) te volgen
 1. Vraag om hulp op [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/no_NO/finalizing-setup.txt
+++ b/_pages/no_NO/finalizing-setup.txt
@ -62,9 +62,9 @@ Under denne prossesen, vil vi også sette opp program som følgende:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) og endre navnet til `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Kopier `firmware.bin` og `cetk` til `/luma/` mappen på SD-kortet
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Sett inn SD-kortet i konsollen igjen
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Hvis dette gir deg en feil, sett DNS-innstillingene til "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/no_NO/troubleshooting.txt
+++ b/_pages/no_NO/troubleshooting.txt
@ -144,9 +144,10 @@ Nettleserbaserte exploits (som browserhax eller 2xrsa) er ofte ustabile og krasj
 1. Hvis du nedgraderte med Gateway tidligere, må du kontrollere at du bruker siste utgave av Luma3DS (v6.2.3 eller nyere)
 1. Hvis NANDen din er på en versjon mellom 3.0.0 og 4.5.0 gjør følgende:
    + Kontroller at du bruker nyeste utgave av Luma3DS (v6.6 eller høyere, i minst)
-    + Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) og endre navnet til `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Kopier `firmware.bin` og `cetk` til `/luma/` mappen på SD-kortet
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Prøv å følg [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/pl_PL/finalizing-setup.txt
+++ b/_pages/pl_PL/finalizing-setup.txt
@ -62,9 +62,9 @@ Podczas tego procesu zainstalujemy również takie programy jak:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Pobierz [ten plik](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) i zmień jego nazwę na `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Pobierz [ten plik](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Skopiuj pliki `firmware.bin` i `cetk` do folderu `/luma/` na twojej karcie SD
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Jeśli przy próbie aktualizacji pojawia się błąd, ustaw swoje DNS (w ustawieniach połączenia internetowego 3DS) na "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/pl_PL/troubleshooting.txt
+++ b/_pages/pl_PL/troubleshooting.txt
@ -144,9 +144,10 @@ Exploity wykorzystujące luki w przeglądarce (takie jak browserhax albo 2xrsa)
 1. Jeśli konsola miała wcześniej obniżaną wersję firmware przy użyciu flashcartu Gateway, upewnij się że używasz najnowszej wersji Luma3DS (minimum v6.2.3 lub wyższej)
 1. Jeśli NAND twojej konsoli zawiera wersję firmware pomiędzy 3.0.0 a 4.5.0, wykonaj poniższe kroki:
    + Upewnij się, że korzystasz z najnowszej wersji Luma3DS (minimum v6.6 lub wyższej)
-    + Pobierz [ten plik](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) i zmień jego nazwę na `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Pobierz [ten plik](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Skopiuj pliki `firmware.bin` i `cetk` do folderu `/luma/` na twojej karcie SD
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/pt_BR/finalizing-setup.txt
+++ b/_pages/pt_BR/finalizing-setup.txt
@ -62,9 +62,9 @@ Durante este processo, também configuramos alguns programas como os seguintes:
  + Copie `boot.firm` para a raiz do seu cartão SD *(sobrescreva arquivos existentes)*
  + Substitua este `boot.firm` pelo o da [versão mais recente do Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) depois de atualizar seu dispositivo mais tarde nestas instruções
 1. Se seu dispositivo estiver em uma versão entre 3.0.0 e 4.5.0 (inclusive), o dispositivo não irá iniciar até você baixar manualmente o firmware necessário:
-  + Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e renomeie-o para `firmware.bin`
+  + Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e renomeie-o para `native.firm`
  + Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copie os arquivos `firmware.bin` e `cetk` para a pasta `/luma/` do seu cartão SD
+  + Copie `native.firm` e `cetk` para a pasta `/luma/` no seu cartão SD
  + Exclua ambos os arquivos depois de atualizar seu dispositivo mais tarde neste guia
 1. Reinsira seu cartão SD no seu dispositivo
 1. Ligue o seu dispositivo
@ -82,7 +82,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
  + Se isso der um erro, defina suas configurações de DNS para "Automático"
  + Se isso ainda lhe dá um erro e sua NAND está abaixo de 9.2.0, [siga CTRTransfer para 9.2.0](9.2.0-ctrtransfer) e, em seguida, tente atualizar novamente
 1. Se seu dispositivo estava em uma versão abaixo da 9.0.0 antes de atualizar, substitua `boot.firm` na raiz do seu cartão SD pelo o da [versão mais recente do Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. Se o seu dispositivo estava em uma versão entre 3.0.0 e 4.5.0 antes de atualizar, apague `firmware.bin` e `cetk` da pasta `/luma/` no seu cartão SD
+1. Se o seu dispositivo estava em uma versão entre 3.0.0 e 4.5.0 antes de atualizar, apague `native.firm` e `cetk` da pasta `/luma/` no seu cartão SD

 ##### Seção III - Iniciando o FBI

--- a/_pages/pt_BR/troubleshooting.txt
+++ b/_pages/pt_BR/troubleshooting.txt
@ -144,9 +144,10 @@ Exploits do navegador (como browserhax ou 2xrsa) são normalmente instáveis e f
 1. Caso você tenha realizado um downgrade com algum Gateway anteriormente, certifique-se de estar usando a versão mais recente do Luma3DS (v6.2.3 ou superior, pelo menos)
 1. Se sua NAND estiver com a firmware numa versão entre 3.0.0 e 4.5.0, faça o seguinte:
    + Certifique-se de que você está usando o Luma3DS versão 6.6 ou mais recente
-    + Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e renomeie-o para `firmware.bin`
+    + Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e renomeie-o para `native.firm`
    + Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copie os arquivos `firmware.bin` e `cetk` para a pasta `/luma/` do seu cartão SD
+    + Copie `native.firm` e `cetk` para a pasta `/luma/` no seu cartão SD
+    + Se você tem o Luma3DS na versão 7.1 ou inferior, renomeie `native.firm` para `firmware.bin`
    + Apague ambos os arquivos depois de atualizar o dispositivo
 1. Tente seguir [CTRTransfer para 9.2.0](9.2.0-ctrtransfer)
 1. Peça ajuda em [Nintendo Homebrew no Discord](https://discord.gg/MWxPgEp).
--- a/_pages/pt_PT/finalizing-setup.txt
+++ b/_pages/pt_PT/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Se encontrares algum erro, muda as configurações da DNS para "automático"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/pt_PT/troubleshooting.txt
+++ b/_pages/pt_PT/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. Se fizeste algum downgrade nessa consola com Gateway, certifica-te que estás a usar a última versão do Luma3DS (v6.2.3 ou maior, pelo menos)
 1. Se a tua NAND estiver entre as versões 3.0.0 e 4.5.0, faz o seguinte:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/ro_RO/finalizing-setup.txt
+++ b/_pages/ro_RO/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Dacă aceasta vă da o eroare, setați DNS-ul pe "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ro_RO/troubleshooting.txt
+++ b/_pages/ro_RO/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/ru_RU/a9lh-to-b9s.txt
+++ b/_pages/ru_RU/a9lh-to-b9s.txt
@ -41,7 +41,7 @@ title: "С A9LH до B9S"
 * <i class="fa fa-magnet" aria-hidden="true" title="Это magnet-ссылка. Воспользуйтесь торрент-клиентом, чтобы скачать этот файл."></i> - **Только пользователи New 3DS:** [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
 * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
 * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
 * Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
 * Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
 * Свежая версия [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
--- a/_pages/ru_RU/finalizing-setup.txt
+++ b/_pages/ru_RU/finalizing-setup.txt
@ -38,7 +38,7 @@ title: "Завершение установки"

 1. Выключите консоль
 1. Вставьте SD-карту в компьютер
-1. Copy `boot.3dsx` to the root of your SD card *(overwrite existing files)*
+1. Скопируйте `boot.3dsx` в корень SD-карты *(перезаписывайте существующие файлы)*
 1. Скопируйте `FBI.3dsx` в папку `/3ds/` на SD-карте
 1. Создайте папку `cias` в корне SD-карты, если таковой нет
 1. Создайте папку `hblauncherloader` в корне SD-карты, если таковой нет
@ -57,14 +57,14 @@ title: "Завершение установки"
    ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
    {: .notice--info}

-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/cf0b05e/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
+1. Если ваше устройство использует прошивку версии ниже 9.0.0, консоль не запустится до тех пор, пока вы не установите альтернативную версию Luma3DS:
+  + Скачайте [альтернативную версию Luma3DS]({{ base_path }}/luma_legacy/cf0b05e/boot.firm)
+  + Скопируйте `boot.firm` в корень SD-карты *(перезаписывайте существующие файлы)*
+  + Замените этот `boot.firm` на файл из [свежей версии Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) после обновления системы далее по инструкции
 1. Если ваше устройство использует прошивку версии от 3.0.0 до 4.5.0, консоль не запустится до тех пор, пока вы вручную не скачаете нужные файлы прошивки:
-  + Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) и переименуйте его в `firmware.bin`
+  + Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) и переименуйте его в `native.firm`
  + Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Скопируйте `firmware.bin` и `cetk` в папку `/luma/` на SD-карте
+  + Скопируйте `native.firm` и `cetk` в папку `/luma/` на SD-карте
  + Удалите оба этих файла позже, после обновления устройства
 1. Вставьте SD-карту обратно в консоль
 1. Включите консоль
@ -81,8 +81,8 @@ title: "Завершение установки"
  + Обновление консоли с установленным B9S + Luma (установленых у вас) безопасно
  + При появлении ошибки, поставьте в настройках подключения, в настройках DNS "Получать DNS автоматически" в положение "Да"
  + Если вы все еще получаете ошибку и версия вашего NAND ниже 9.2.0, [выполните 9.2.0 CTRTransfer](9.2.0-ctrtransfer) и попробуйте обновиться еще раз
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. Если ваше устройство использовало прошивку версии ниже 9.0.0 до обновления, замените `boot.firm` в корне SD-карты на файл из [свежей версии Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+1. Если ваше устройство использовало прошивку версии от 3.0.0 до 4.5.0 до обновления, удалите `native.firm` и `cetk` из папки `/luma/` на SD-карте

 ##### Часть III - Запуск FBI

--- a/_pages/ru_RU/get-started-(new-3ds).txt
+++ b/_pages/ru_RU/get-started-(new-3ds).txt
@ -55,8 +55,8 @@ title: "Начало (New 3DS)"
      <td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(dsiware)">Установка boot9strap (DSiWare)</a></td>
    </tr>
    <tr>
-      <td style="text-align: center; font-weight: bold;" colspan="2">ALL VERSIONS<br></td>
-      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installing boot9strap (ntrboothax)</a><br><sub>(Requires a Compatible Flashcart)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installing boot9strap (Hardmod)</a><br><sub>(Requires Soldering)</sub></p></td>
+      <td style="text-align: center; font-weight: bold;" colspan="2">ВСЕ ВЕРСИИ<br></td>
+      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Установка boot9strap (ntrboothax)</a><br><sub>(Требуется совместимый флешкартридж)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Установка boot9strap (Hardmod)</a><br><sub>(Требуется пайка)</sub></p></td>
    </tr>
  </tbody>
 </table>
--- a/_pages/ru_RU/get-started-(old-3ds).txt
+++ b/_pages/ru_RU/get-started-(old-3ds).txt
@ -102,8 +102,8 @@ title: "Начало (Old 3DS)"
      <td style="text-align: center; font-weight: bold;" colspan="2"><a href="installing-boot9strap-(dsiware)">Установка boot9strap (DSiWare)</a></td>
    </tr>
    <tr>
-      <td style="text-align: center; font-weight: bold;" colspan="2">ALL VERSIONS<br></td>
-      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installing boot9strap (ntrboothax)</a><br><sub>(Requires a Compatible Flashcart)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installing boot9strap (Hardmod)</a><br><sub>(Requires Soldering)</sub></p></td>
+      <td style="text-align: center; font-weight: bold;" colspan="2">ВСЕ ВЕРСИИ<br></td>
+      <td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Установка boot9strap (ntrboothax)</a><br><sub>(Требуется совместимый флешкартридж)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Установка boot9strap (Hardmod)</a><br><sub>(Требуется пайка)</sub></p></td>
    </tr>
  </tbody>
 </table>
--- a/_pages/ru_RU/get-started.txt
+++ b/_pages/ru_RU/get-started.txt
@ -26,7 +26,7 @@ title: "Начало"
 Прежде чем начать, рекомендуется проверить свою SD-карту на ошибки с помощью [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), или [F3X (Mac)](f3x-(mac))!
 {: .notice--warning}

-Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! Это включает устройства CHN и TWN регионов, которые были ранее невзламываемыми!
+Обратите внимание, что новые методы [ntrboothax](installing-boot9strap-(ntrboothax)) и [hardmod](installing-boot9strap-(hardmod)) работают на *всех устройствах, регионах и версиях*! Это включает устройства CHN и TWN регионов, которые были ранее невзламываемыми!
 {: .notice--success}

 {% capture notice-1 %}
--- a/_pages/ru_RU/homebrew-launcher-(alternatives).txt
+++ b/_pages/ru_RU/homebrew-launcher-(alternatives).txt
@ -31,7 +31,7 @@ Homebrew Launcher имеет множество точек входа, или м
    | <sub> | <sub>Что понадобится | <sub>Издания | <sub>Устройства | <sub>Регионы | <sub>Версии игры | <sub>Версии прошивки |
    |:-:|:-:|:-:|:-:|:-:|:-:|:-:|
    | <sub>[browserhax](https://yls8.mtheall.com/3dsbrowserhax.php) | <sub>Ничего | <sub>Предустановлено | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>Все | <sub>от 9.0.0-2 до 11.0.0-33 включительно |
-    | <sub>[oot3dhax](https://github.com/yellows8/oot3dhax) | <sub>[*Ocarina of Time 3D*](https://amzn.to/2fkaKdp), <br> Either a powersaves or another 3DS which already has the Homebrew Launcher | <sub>Cart | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>All | <sub>9.0.0-X up to and including 11.4.0-X |
+    | <sub>[oot3dhax](https://github.com/yellows8/oot3dhax) | <sub>[*Ocarina of Time 3D*](https://amzn.to/2fkaKdp), <br> Powersaves или другая 3DS с доступом к Homebrew Launcher | <sub>Картридж | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>Все | <sub>от 9.0.0-X до 11.4.0-X включительно |
    | <sub>[smashbroshax](https://gbatemp.net/threads/397194/) | <sub>[*Super Smash Bros*](https://amzn.to/2ftGA72) | <sub>Картридж, eShop | <sub>New  | <sub>EUR, JPN, USA | <sub><1.1.3, <br> Картриджи с "amiibo" на обложке идут с версией 1.1.4 | <sub>от 9.0.0-X до 11.3.0-X включительно |
    | <sub>[supermysterychunkhax](https://smd.salthax.org/) | <sub>[*Pokemon Super Mystery Dungeon*](https://amzn.to/2ebxZ75), <br> Другая 3DS с доступом к Homebrew Launcher | <sub>Картридж | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>Все | <sub>от 9.9.0-X (USA/JPN) / 10.2.0-X (EUR) до 11.0.0-X включительно |
    | <sub>[freakyhax](http://plutooo.github.io/freakyhax/) | <sub>[*Freakyforms Deluxe*](https://amzn.to/2f6eHO7) | <sub>eShop, Картридж | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>Все | <sub>от 9.0.0-X до 11.3.0-X включительно |
@ -39,7 +39,7 @@ Homebrew Launcher имеет множество точек входа, или м
    | <sub>[BASICSploit](https://mrnbayoh.github.io/basicsploit/) | <sub>[*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | <sub>eShop | <sub>New, Old, 2DS | <sub>USA | <sub>3.2.1 | <sub>от 9.0.0-X до 11.0.0-X включительно |
    | <sub>[smilehax](https://plutooo.github.io/smilehax/) | <sub>[*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | <sub>eShop | <sub>New, Old, 2DS | <sub>JPN, USA | <sub>3.3.1 | <sub>от 9.0.0-X до 11.0.0-X включительно |
    | <sub>[stickerhax](https://github.com/yellows8/stickerhax) | <sub>[*Paper Mario: Sticker Star*](https://amzn.to/2f6aDx8), <br> Другая 3DS с доступом к Homebrew Launcher | <sub>eShop, Картридж | <sub>New, Old, 2DS | <sub>EUR, JPN, KOR, USA | <sub>Все | <sub>от 9.0.0-X до 11.3.0-X включительно |
-    | <sub>[Ninjhax 2](http://smealum.github.io/ninjhax2/) | <sub>[*Cubic Ninja*](https://amzn.to/2eRI1by) | <sub>eShop, Cart | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>All | <sub>9.0.0-X up to and including 11.4.0-X |
+    | <sub>[Ninjhax 2](http://smealum.github.io/ninjhax2/) | <sub>[*Cubic Ninja*](https://amzn.to/2eRI1by) | <sub>eShop, Картридж | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>Все | <sub>от 9.0.0-X до 11.4.0-X включительно |
    | <sub>[GenHax](https://github.com/svanheulen/genhax_proxy_installer) | <sub>[*Monster Hunter X*](http://amzn.to/2gsk6Tk) | <sub>eShop | <sub>New | <sub>JPN | <sub>Все | <sub>от 9.9.0-X до 11.2.0-X включительно |
    {: .notice--info}

--- a/_pages/ru_RU/installing-boot9strap-(2xrsa).txt
+++ b/_pages/ru_RU/installing-boot9strap-(2xrsa).txt
@ -5,7 +5,7 @@ title: "Установка boot9strap (2xrsa)"
 #### Что понадобится

 * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
 * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
 * Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)

@ -46,7 +46,7 @@ title: "Установка boot9strap (2xrsa)"
 1. Нажимая (A) выберите следующие пункты:    
  + **"Show NAND or user string in System Settings"**
 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
-  + If you get an error, just continue the next page
+  + Если появляется ошибка, просто переходите к следующей странице

 ___

--- a/_pages/ru_RU/installing-boot9strap-(browser).txt
+++ b/_pages/ru_RU/installing-boot9strap-(browser).txt
@ -8,7 +8,7 @@ title: "Установка boot9strap (Браузер)"
 #### Что понадобится

 * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
 * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
 * Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)

@ -50,7 +50,7 @@ title: "Установка boot9strap (Браузер)"
 1. Нажимая (A) выберите следующие пункты:    
  + **"Show NAND or user string in System Settings"**
 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
-  + If you get an error, just continue the next page
+  + Если появляется ошибка, просто переходите к следующей странице

 ___

--- a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt
@ -25,7 +25,7 @@ title: "Установка boot9strap (Инъекция в игры DSiWare)"
  + [`DSiWare_jpn_4swordshax_injection.zip`](magnet:?xt=urn:btih:1bcc90c93da91c9876671f6218084207def90db9&dn=DSiWare_jpn_4swordshax_injection.zip&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce)
 * Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
 * Свежая версия [b9sTool](https://github.com/Plailect/b9sTool/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
 * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
 * Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
 * 11.4.0 `.firm` соответствующий **целевой 3DS**
@ -165,7 +165,7 @@ title: "Установка boot9strap (Инъекция в игры DSiWare)"
 1. Нажимая (A) выберите следующие пункты:    
  + **"Show NAND or user string in System Settings"**
 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
-  + If you get an error, just continue the next page
+  + Если появляется ошибка, просто переходите к следующей странице

 ___

--- a/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt
@ -27,7 +27,7 @@ title: "Установка boot9strap (Инъекция в сохранения
 * Свежая версия [3ds_dsiwarehax_installer](https://github.com/yellows8/3ds_dsiwarehax_installer/releases)
 * Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
 * Свежая версия [b9sTool](https://github.com/Plailect/b9sTool/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
 * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
 * Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
 * 11.4.0 `.firm` соответствующий **целевой 3DS**
@ -181,7 +181,7 @@ title: "Установка boot9strap (Инъекция в сохранения
 1. Нажимая (A) выберите следующие пункты:    
  + **"Show NAND or user string in System Settings"**
 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
-  + If you get an error, just continue the next page
+  + Если появляется ошибка, просто переходите к следующей странице

 ___

--- a/_pages/ru_RU/installing-boot9strap-(hardmod).txt
+++ b/_pages/ru_RU/installing-boot9strap-(hardmod).txt
@ -2,7 +2,7 @@
 title: "Установка boot9strap (Hardmod)"
 ---

-Отличное руководство по пайке хардмода находится [здесь](https://gbatemp.net/threads/414498/) (англ.). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
+Отличное руководство по пайке хардмода находится [здесь](https://gbatemp.net/threads/414498/) (англ.). Если у вас New 3DS, прочтите [это](https://github.com/Plailect/Guide/issues/681) и [это](https://github.com/Plailect/Guide/issues/1185) перед тем, как начать.
 {: .notice--info}

 Это рабочая реализация "FIRM partitions known-plaintext"-эксплойта. Подробнее о нем [здесь](https://www.3dbrew.org/wiki/3DS_System_Flaws) (англ.).
@ -17,7 +17,7 @@ title: "Установка boot9strap (Hardmod)"
 #### Что понадобится

 * Полученный с помощью [хардмода](https://gbatemp.net/threads/414498/) (англ.) образ NAND
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
 * Свежая версия [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
  + Пользователи Windows могут воспользоваться скомпилированным `.exe-файлом`, тогда как пользователям Mac и Linux нужно иметь в системе установленный [Python 3](https://www.python.org/downloads/) для запуска `.py-файлов`
 * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
@ -82,7 +82,7 @@ title: "Установка boot9strap (Hardmod)"
 1. Нажимая (A) выберите следующие пункты:    
  + **"Show NAND or user string in System Settings"**
 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
-  + If you get an error, just continue the next page
+  + Если появляется ошибка, просто переходите к следующей странице

 ___

--- a/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt
@ -8,7 +8,7 @@ title: "Установка boot9strap (Homebrew Launcher)"
 #### Что понадобится

 * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
 * Свежая версия [safehax](https://github.com/TiniVi/safehax/releases/latest)
 * Свежая версия [udsploit](https://github.com/smealum/udsploit/releases/latest)
 * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
@ -57,7 +57,7 @@ title: "Установка boot9strap (Homebrew Launcher)"
 1. Нажимая (A) выберите следующие пункты:    
  + **"Show NAND or user string in System Settings"**
 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
-  + If you get an error, just continue the next page
+  + Если появляется ошибка, просто переходите к следующей странице

 ___

--- a/_pages/ru_RU/installing-boot9strap-(mset).txt
+++ b/_pages/ru_RU/installing-boot9strap-(mset).txt
@ -8,7 +8,7 @@ title: "Установка boot9strap (MSET)"
 #### Что понадобится

 * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
 * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
 * Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
 * Любой флешкартридж для DS, работающий на вашей версии прошивки
@ -51,7 +51,7 @@ title: "Установка boot9strap (MSET)"
 1. Нажимая (A) выберите следующие пункты:    
  + **"Show NAND or user string in System Settings"**
 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
-  + If you get an error, just continue the next page
+  + Если появляется ошибка, просто переходите к следующей странице

 ___

--- a/_pages/ru_RU/installing-boot9strap-(ntrboothax).txt
+++ b/_pages/ru_RU/installing-boot9strap-(ntrboothax).txt
@ -1,23 +1,23 @@
 ---
-title: "Installing boot9strap (ntrboothax)"
+title: "Установка boot9strap (ntrboothax)"
 ---

-This is a placeholder page for the upcoming "ntrboothax" exploit.
+На этой странице будет размещена инструкция для эксплойта "ntrboothax".
 {: .notice--primary}

 {% capture notice-1 %}

-The ntrboothax exploit will require the following:
+Для ntrboothax вам понадобится следующее:

-+ A DS / DSi flashcart
-  + Exact flashcart compatibility will be added when this exploit is released
-+ A small magnet
-  + Note that this is only required on folding style 3DSs, not 2DSs
-  + This is because the exploit requires your device to enter sleep mode while still having access to the buttons
-  + The magnet should be able to trigger your device's sleep mode by holding it on or around the ABXY buttons
-+ *One* of the following methods of installing ntrboothax to your flashcart:
-  + A [Powersaves](https://amzn.to/2fb3VY7)
-  + Another 3DS or 2DS already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ DS / DSi флешкартридж
+  + Точная информация о совместимых флешкартриджах будет добавлена после релиза эксплойта
+ Небольшой магнит
+  + Заметьте, что это необходимо только для 3DS складной конструкции, не для 2DS
+  + Это необходимо, потому что эксплойт требует ввести консоль в режим сна, сохранив при этом доступ к кнопкам
+  + Магнит должен вводить вашу консоль в режим сна, если приложить его к кнопкам ABXY или рядом с ними
+ *Один* из следующих методов установки ntrboothax на флешкартридж:
+  + [Powersaves](https://amzn.to/2fb3VY7)
+  + Другая 3DS или 2DS с установленной кастомной прошивкой (например boot9strap или arm9loaderhax)

 {% endcapture %}

--- a/_pages/ru_RU/site-navigation.txt
+++ b/_pages/ru_RU/site-navigation.txt
@ -41,12 +41,12 @@ sitemap: false
 + [Установка boot9strap (Hardmod)](installing-boot9strap-(hardmod))
 + [Установка boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
 + [Установка boot9strap (MSET)](installing-boot9strap-(mset))
-+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
+ [Установка boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
 + [Перенос EmuNAND](move-emunand)
 + [NTR и Cubic Ninja](ntr-and-cubic-ninja)
 + [Смена региона](region-changing)
 + [Проблемы и их решения](troubleshooting)
-+ [Updating B9S](updating-b9s)
+ [Обновление B9S](updating-b9s)
 + [Зачем реклама?](why-ads)
 {% endcapture %}
 <div class="notice--primary">{{ notice-2 | markdownify }}</div>
--- a/_pages/ru_RU/troubleshooting.txt
+++ b/_pages/ru_RU/troubleshooting.txt
@ -144,9 +144,10 @@ title: "Проблемы и их решения"
 1. Если вы понижали прошивку через Gateway, то убедитесь, что у вас установлена самая последняя версия Luma3DS (не ниже 6.2.3)
 1. Если версия вашего NAND между 3.0.0 и 4.5.0, проделайте следующие действия:
    + Убедитесь, что используете самую свежую версию Luma 3DS (6.6, или выше)
-    + Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) и переименуйте его в `firmware.bin`
+    + Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) и переименуйте его в `native.firm`
    + Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Скопируйте `firmware.bin` и `cetk` в папку `/luma/` на SD-карте
+    + Скопируйте `native.firm` и `cetk` в папку `/luma/` на SD-карте
+    + Если у вас Luma3DS версии 7.1 или ниже, переименуйте `native.firm` в `firmware.bin`
    + После обновления прошивки удалите оба этих файла
 1. Попробуйте выполнить [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Обратитесь за помощью в [Nintendo Homebrew on Discord (англ.)](https://discord.gg/MWxPgEp).
--- a/_pages/ru_RU/updating-b9s.txt
+++ b/_pages/ru_RU/updating-b9s.txt
@ -28,7 +28,7 @@ title: "Обновление B9S"

 * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
 * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
 * Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
 * Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)

@ -41,7 +41,7 @@ title: "Обновление B9S"

 1. Выключите консоль
 1. Вставьте SD-карту в компьютер
-1. **Leave the old (v7.1) version of Luma3DS (`boot.firm`) as it is. You will update this later.**
+1. **Оставьте старую (v7.1) версию Luma3DS (`boot.firm`) без изменений. Вы сможете обновить ее позже.**
 1. Скопируйте `boot.3dsx` в корень SD-карты
 1. Создайте папку `boot9strap` в корне SD-карты
 1. Скопируйте `GodMode9.firm` из `.zip-архива` GodMode9 в папку `/luma/payloads/` на SD-карте
@ -74,7 +74,7 @@ title: "Обновление B9S"
  + **"Show NAND or user string in System Settings"**
 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться

-##### Section V - CTRNAND Luma3DS
+##### Часть V - CTRNAND Luma3DS

 1. Перезагрузитесь, удерживая кнопку (Start), чтобы запустить меню Luma3DS chainloader
 1. Запустите GodMode9, нажав кнопку (A)
--- a/_pages/sr_SP/finalizing-setup.txt
+++ b/_pages/sr_SP/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/sr_SP/troubleshooting.txt
+++ b/_pages/sr_SP/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/sv_SE/finalizing-setup.txt
+++ b/_pages/sv_SE/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/sv_SE/troubleshooting.txt
+++ b/_pages/sv_SE/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/th_TH/finalizing-setup.txt
+++ b/_pages/th_TH/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/th_TH/troubleshooting.txt
+++ b/_pages/th_TH/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/tr_TR/finalizing-setup.txt
+++ b/_pages/tr_TR/finalizing-setup.txt
@ -62,9 +62,9 @@ Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  +Bunu indirin [bu dosyayı](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ve `firmware.bin` olarak yeniden adlandırın
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Bunu indirin [bu dosyayı](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + `firmware.bin` ve` cetk` dosyalarını SD kartınızdaki `/ luma /` klasörüne kopyalayın
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. SD kartınızı cihazınıza tekrar takın
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Bu bir hata verirse, DNS ayarlarınızı "otomatik" olarak belirleyin
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/tr_TR/troubleshooting.txt
+++ b/_pages/tr_TR/troubleshooting.txt
@ -144,9 +144,10 @@ Tarayıcı tabanlı açıklar (browserhax veya 2xrsa gibi) çoğu zaman dengesiz
 1. Daha önce Gateway kullanarak sürüm düşürdüyseniz en son sürüm Luma3DS kullandığınıza emin olun(v6.2.3 veya daha üstü)
 1. NAND versiyonunuz 3.0.0 ve 4.5.0 arasındaysa şunları yapın:
    + En son Luma3DS sürümünü kullanmakta olduğunuzdan emin olun (v6.6 veya üstü, en az)
-    +Bunu indirin [bu dosyayı](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ve `firmware.bin` olarak yeniden adlandırın
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Bunu indirin [bu dosyayı](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + `firmware.bin` ve` cetk` dosyalarını SD kartınızdaki `/ luma /` klasörüne kopyalayın
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/uk_UA/finalizing-setup.txt
+++ b/_pages/uk_UA/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/uk_UA/troubleshooting.txt
+++ b/_pages/uk_UA/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/vi_VN/finalizing-setup.txt
+++ b/_pages/vi_VN/finalizing-setup.txt
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/vi_VN/troubleshooting.txt
+++ b/_pages/vi_VN/troubleshooting.txt
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
 1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
    + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
-    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/zh_CN/finalizing-setup.txt
+++ b/_pages/zh_CN/finalizing-setup.txt
@ -62,10 +62,9 @@ In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/)
  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
 1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  +下载[这个文件](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)并重命名为`firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + 下载[这个文件](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + 复制`firmware.bin`和`cetk`到SD卡的`/luma/`文件夹下
-
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
@ -83,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  如果这一步出错，则将DNS设置改为”auto”（自动）
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/zh_CN/troubleshooting.txt
+++ b/_pages/zh_CN/troubleshooting.txt
@ -144,10 +144,10 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
 1. 如果你以前用Gateway降过级，确保你使用的是最新版的Luma3DS（版本号在v6.2.3及以上）
 1. 如果你的系统版本在3.0.0到4.5.0之间，进行如下操作：
    + 确保你使用的是最新版的Luma3DS（版本号在v6.6及以上）
-    +下载[这个文件](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)并重命名为`firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + 下载[这个文件](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + 复制`firmware.bin`和`cetk`到SD卡的`/luma/`文件夹下
-
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + Delete both of these files after updating your device
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
--- a/_pages/zh_CN/updating-b9s.txt
+++ b/_pages/zh_CN/updating-b9s.txt
@ -24,23 +24,23 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte

 <div class="notice--danger">{{ notice-1 | markdownify }}</div>

-#### 你需要
+#### What you need

 * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
 * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)

-#### 操作指南
+#### Instructions

-##### 第一部分 - 准备工作
+##### Section I - Prep Work

 For all steps in this section, overwrite any existing files on your SD card.
 {: .notice--info}

 1. Power off your device
-1. 将你的 SD 卡插入到您的计算机
+1. Insert your SD card into your computer
 1. **Leave the old (v7.1) version of Luma3DS (`boot.firm`) as it is. You will update this later.**
 1. Copy `boot.3dsx` to the root of your SD card
 1. Create a folder named `boot9strap` on the root of your SD card
@ -49,7 +49,7 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Reinsert your SD card into your device

-##### 第二部分 - 安装 boot9strap
+##### Section II - Installing boot9strap

 1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
 1. Launch SafeB9SInstaller by pressing (A)
@ -61,7 +61,7 @@ For all steps in this section, overwrite any existing files on your SD card.

 ##### Section III - Updating Luma3DS

-1. 将你的 SD 卡插入到您的计算机
+1. Insert your SD card into your computer
 1. Delete the existing `boot.firm` from the root of your SD card
 1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
 1. Reinsert your SD card into your device
@ -80,7 +80,7 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. Launch GodMode9 by pressing (A)
 1. Navigate to `[0:] SDCARD` -> `luma` -> `payloads`
 1. Press (X) on `SafeB9SInstaller.firm` to delete it
-1. 按 (A) 确认
+1. Press (A) to confirm
 1. Press (B) to return to `[0:] SDCARD`
 1. Press (Y) on `boot.firm` to copy it
 1. Press (B) to return to the main menu
@ -90,7 +90,7 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
 1. Press (X) on `arm9loaderhax.bin` to delete it
  + If you do not have this file, just proceed with the instructions
-1. 按 (A) 确认
+1. Press (A) to confirm
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
@ -99,7 +99,7 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
  + If you do not have this folder, just proceed with the instructions
-1. 按 (A) 确认
+1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
--- a/_pages/zh_TW/finalizing-setup.txt
+++ b/_pages/zh_TW/finalizing-setup.txt
@ -62,9 +62,9 @@ title: "完成安裝"
  + 複製 `boot.firm` 到 SD 卡的根目錄底下*（覆蓋所有檔案）*
  + 在稍後您更新您的主機後，請將 `boot.firm` 以[最新版的 Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) 替換
 1. 如果您的系統版本是在 3.0.0 到 4.5.0（含）之間，您必須同時手動下載下列韌體，否則無法開機：
-  + 下載[此檔案](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)並將它重新命名為`firmware.bin`
+  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
  + 下載[此檔案](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + 複製 `firmware.bin` 及 `cetk` 檔案到 SD 卡上的 `/luma/` 資料夾
+  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
  + 在教學之後提到更新主機時，請刪除這兩個文件
 1. 將 SD 卡插回主機中
 1. 啟動您的主機
@ -82,7 +82,7 @@ title: "完成安裝"
  + 如果過程中出現錯誤，試試到 DNS 設定底下將設定改成「自動 （auto）」
  + 如果錯誤持續，且您 NAND 的系統版本為 9.2.0 以下，請進行[版本 9.2.0 的 CTRTransfer](9.2.0-ctrtransfer)，並再試一次
 1. 如果您的主機在更新前為低於 9.0.0 的系統版本，請將您 SD 卡中的 `boot.firm` 檔案以[最新版的 Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) 替換
-1. 如果您主機先前為介於 3.0.0 至 4.5.0 的系統版本之間，請將 `firmware.bin` 以及 `cetk` 於 SD 卡中的 `/luma/` 資料夾刪除
+1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### 第三節 — 啟動 FBI 管理器

--- a/_pages/zh_TW/troubleshooting.txt
+++ b/_pages/zh_TW/troubleshooting.txt
@ -144,9 +144,10 @@ title: "疑難排解"
 1. 如果您之前有透過 Gateway 進行降級，請確保您使用的是最新版的 Luma3DS （v6.2.3 以上）
 1. 如果您 NAND 的系統版本是在 3.0.0 到 4.5.0 之間，請進行下列操作：
    + 請先確保您 Luma3DS 是最新版本的（至少 v6.6 版）
-    + 下載[此檔案](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)並將它重新命名為`firmware.bin`
+    + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
    + 下載[此檔案](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-    + 複製 `firmware.bin` 及 `cetk` 檔案到 SD 卡上的 `/luma/` 資料夾
+    + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
+    + If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
    + 在更新完您的主機後，刪除這兩個檔案
 1. 試試看進行[9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. 請於 [Discord 的 Nintendo Homebrew 伺服器](https://discord.gg/MWxPgEp)尋求。