New Crowdin translations (#1199)
This commit is contained in:
Devon Maloney
Plailect
parent
eae2b57a8b
commit
d180fb1ed8
95 changed files with 291 additions and 260 deletions
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Si obteniu un error, establiu els vostres paràmetres DNS en "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. Wenn dein Gerät eine Version zwischen 3.0.0 und (inklusive) 4.5.0 besitzt, wird dein Gerät nicht starten bis du die die nötige Firmware herunterlädst:
|
||||
+ Lade [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) herunter und nenne sie `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Lade dir [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) herunter
|
||||
+ Kopiere `firmware.bin` und `cetk` in den `/luma/` Ordner deiner SD-Karte
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Stecke deine SD-Karte nun wieder in deinen 3DS
|
||||
1. Schalte deine Konsole an
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browserbasierte Exploits (wie browserhax oder 2xrsa) sind oft instabil und stür
|
|||
1. Wenn du vorher bereits mit der Gateway-Flashkarte downgegraded hast, stelle sicher, dass du die neueste Luma3DS-Version (mindestens Version 6.2.3 oder höher) benutzt
|
||||
1. Wenn dein NAND zwischen Version 3.0.0 und 4.5.0 ist, mache folgendes:
|
||||
+ Stelle sicher, dass du die neueste Version von Luma3DS nutzt (mindestens Version 6.6 oder höher)
|
||||
+ Lade [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) herunter und nenne sie `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Lade dir [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) herunter
|
||||
+ Kopiere `firmware.bin` und `cetk` in den `/luma/` Ordner deiner SD-Karte
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Lösche beide dieser Dateien nach dem das Update installiert wurde
|
||||
1. Versuche folgendes: [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Für Hilfe auf Englisch, frage auf dem [Nintendo Homebrew Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) και μετονομάστε το σε `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Αντιγράψτε τα αρχεία `firmware.bin` and `cetk` στον φάκελο `/luma/` στην κάρτα SD
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
|
|||
1. Εάν είχατε υποβαθμίσει προηγουμένως με την χρήση Gateway, βεβαιωθείτε ότι χρησιμοποιείτε την τελευταία έκδοση του Luma3DS (v6.2.3 και πάνω, τουλάχιστον)
|
||||
1. Εάν η NAND βρίσκεται μεταξύ των εκδόσεων 3.0.0 και 4.5.0, ακολουθήστε τα παρακάτω βήματα:
|
||||
+ Βεβαιωθείτε ότι χρησιμοποιείτε την τελευταία έκδοση του Luma3DS (v6.6 και πάνω, τουλάχιστον)
|
||||
Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) και μετονομάστε το σε `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Αντιγράψτε τα αρχεία `firmware.bin` and `cetk` στον φάκελο `/luma/` στην κάρτα SD
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Durin' 'tis process, we also setup programs such as th' followin':
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Durante este proceso, también instalaremos programas como los siguientes:
|
|||
+ Copia `boot.firm` a la raíz de tu tarjeta SD *(sobreescribiendo archivos existente)*
|
||||
+ Sustituye este `boot.firm` con el de la [última versión de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) luego de actualizar tu consola más adelante en estas instrucciones
|
||||
1. Si tu consola está entre una versión entre 3.0.0 y 4.5.0 (inclusive), tu dispositivo no encenderá hasta que descargues manualmente el firmware requerido:
|
||||
+ Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) y cambia su nombre a `firmware.bin`
|
||||
+ Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) y cambia su nombre a `native.firm`
|
||||
+ Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copia `firmware.bin` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
|
||||
+ Copia `native.firm` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
|
||||
+ Borra ambos archivos después de actualizar tu dispositivo más adelante en estas instrucciones
|
||||
1. Vuelve a insertar tu tarjeta SD en tu consola
|
||||
1. Enciende tu consola
|
||||
|
|
@ -82,7 +82,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
|
|||
+ Si esto te da un error, ajusta tu configuración de DNS a "obtención automática"
|
||||
+ Si esto te sigue dando un error y tu NAND está por debajo de 9.2.0, [sigue 9.2.0 CTRTransfer(9.2.0-ctrtransfer), luego reintenta actualizar
|
||||
1. Si tu consola estaba en una versión anterior a 9.0.0 antes de actualizar, reemplaza `boot.firm` en la raíz de tu tarjeta SD con el de la [última versión de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Si tu consola estaba en una versión entre 3.0.0 y 4.5.0 antes de actualizar, elimina `firmware.bin` y `cetk` de la carpeta `/luma/` en tu tarjeta SD
|
||||
1. Si tu consola estaba en una versión entre 3.0.0 y 4.5.0 antes de actualizar, elimina `native.firm` y `cetk` de la carpeta `/luma/` en tu tarjeta SD
|
||||
|
||||
##### Sección III - Iniciar FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Los exploits basados en navegador (como browserhax o 2xrsa) son a menudo inestab
|
|||
1. Si previamente hiciste un downgrade con Gateway, asegúrate que la versión de Luma3DS que estés utilizando sea la mas reciente (v6.2.3 o superior)
|
||||
1. Si tu NAND es de una versión entre 3.0.0 y 4.5.0, realiza lo siguiente:
|
||||
+ Asegúrate de estar usando la versión más reciente de Luma3DS (v6.6 o superior, por lo menos)
|
||||
+ Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) y cambia su nombre a `firmware.bin`
|
||||
+ Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) y cambia su nombre a `native.firm`
|
||||
+ Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copia `firmware.bin` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
|
||||
+ Copia `native.firm` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
|
||||
+ Si tienes una versión de Luma3DS 7.1 o inferior, renombra `native.firm` a `firmware.bin`
|
||||
+ Elimina ambos archivos después de actualizar tu consola
|
||||
1. Prueba siguiendo [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Pide ayuda (*en inglés*) en el [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp)
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Lataa [tämä tiedosto](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ja uudelleennimeä se muotoon `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Lataa [tämä tiedosto](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Kopioi `firmware.bin` ja `cetk` SD-korttisi `/luma/`-kansioon
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Aseta SD-korttisi takaisin konsoliisi
|
||||
1. Käynnistä konsolisi
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Jos saat virheen, laita DNS:n automaattinen haku (Auto-Obtain DNS) päälle asetuksista
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Selainhaavoittuvuuksiin perustuvat käynnistystavat (kuten browserhax ja 2xrsa)
|
|||
1. Jos olet aikaisemmin päivittänyt taaksepäin Gatewayn avulla, varmista, että käytät Luma3DS:n viimeisintä versiota (v6.2.3 tai uudempi)
|
||||
1. Jos NANDisi versio on jotakin 3.0.0:n ja 4.5.0:n väliltä, tee seuraavat toimet:
|
||||
+ Varmista, että käytät Luma3DS:n viimeisintä versiota (v6.6 tai uudempi)
|
||||
+ Lataa [tämä tiedosto](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ja uudelleennimeä se muotoon `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Lataa [tämä tiedosto](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Kopioi `firmware.bin` ja `cetk` SD-korttisi `/luma/`-kansioon
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Poista kummatkin tiedostot päivitettyäsi konsolin
|
||||
1. Kokeile seurata osiota [9.2.0-CTRTransfer](9.2.0-crtransfer)
|
||||
1. Kysy apua (englanniksi) [Nintendo Homebrew -palvelimelta Discordissa](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@ Durant cette étape, nous allons également configurer les programmes suivants :
|
|||
+ **Themely** *(Permet d'installer des thèmes customisés)*
|
||||
+ **Luma3DS Updater** *(Permet de mettre facilement à jour votre CFW)*
|
||||
+ **GodMode9** *(Programme multifonction qui peut effectuer des opérations relatives à la NAND et aux cartouches)*
|
||||
+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher as a regular application thanks to Rosalina magic)*
|
||||
+ **Homebrew Launcher Loader** *(Permet de lancez l'Homebrew Launcher comme une application normale grâce à Rosalina Magic)*
|
||||
|
||||
{% endcapture %}
|
||||
|
||||
|
|
@ -38,7 +38,7 @@ Durant cette étape, nous allons également configurer les programmes suivants :
|
|||
|
||||
1. Éteignez votre 3DS
|
||||
1. Insérez votre carte SD dans votre ordinateur
|
||||
1. Copy `boot.3dsx` to the root of your SD card *(overwrite existing files)*
|
||||
1. Copiez 'boot.3dsx' à la racine de votre carte SD *(En écrasant les fichiers existants)*
|
||||
1. Copiez `FBI.3dsx` dans le dossier `/3ds/` de votre carte SD
|
||||
1. Créez un dossier nommé "files9" à la racine de votre carte SD si celui ci n'existe pas
|
||||
1. Créez un dossier nommé `hblauncherloader` à la racine de votre carte SD si celui-ci n'existe pas déjà
|
||||
|
|
@ -57,14 +57,14 @@ Durant cette étape, nous allons également configurer les programmes suivants :
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/cf0b05e/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. Si votre console possède un firmware antérieur à 9.0.0, votre console ne démarra pas sauf si vous utilisez une version alternative de Luma3DS:
|
||||
+ Téléchargez [Une ancienne version de Luma3DS]({{ base_path }}/luma_legacy/cf0b05e/boot.firm)
|
||||
+ Copiez `boot.firm` à la racine de votre carte SD *(En écrasant les fichiers existants)*
|
||||
+ Remplacez le `boot.firm` avec celui de [la dernière version de Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) après avoir mis à jour votre console plus tard dans ce guide
|
||||
1. Si votre appareil est sur une version entre 3.0.0 à 4.5.0 (inclue), votre appareil ne démarrera pas jusqu'à ce que vous téléchargiez manuellement le firmware requis :
|
||||
+ Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) et renommez-le "firmware.bin"
|
||||
+ Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copiez les fichiers `firmware.bin` et `cetk` dans le dossier `/luma/` de votre carte SD
|
||||
Copiez `native.firm` et `cetk` au dossier `/luma/` dans ta carte SD
|
||||
+ Supprimez ces deux fichiers après avoir mit à jour votre console plus loin dans ce mode d’emploi
|
||||
1. Réinsérez votre carte SD dans votre 3DS
|
||||
1. Allumez à présent votre 3DS
|
||||
|
|
@ -81,13 +81,13 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou
|
|||
+ Mettre à jour tout en utilisant B9S + Luma (ce que vous avez) sont sans danger
|
||||
+ Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique"
|
||||
+ Si cela vous donne encore une erreur et que votre NAND est en dessous de 9.2.0, [suivez 9.2.0 CTRTransfer](9.2.0-ctrtransfer), puis essayez de mettre à jour à nouveau
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. Si votre console était dans un fimware antérieur à 9.0.0 avant la mise à jour, remplacez `boot.firm` à la racine de votre carte SD avec celui de [la dernière version de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Si votre console était dans un firmware compris entre 3.0.0 et 4.5.0 avant la mise à jour, Supprimez `native.firm` et `cetk` de votre dossier `/luma/`sur votre carte SD
|
||||
|
||||
##### Section III - Lancez FBI
|
||||
|
||||
1. Lancez l’application Mode téléchargement
|
||||
1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu
|
||||
1. Appuyez simultanément sur (L) + (Bas) + (Select) pour ouvrir le menu Rosalina
|
||||
1. Sélectionnez "Miscellaneous options"
|
||||
1. Sélectionnez "Switch the hb. title to the current app."
|
||||
1. Appuyez sur (B) pour continuer
|
||||
|
|
@ -159,7 +159,7 @@ Votre console démarrera désormais Luma3DS CFW SysNAND (c'est-à-dire sur votre
|
|||
Vous pouvez maintenir (Select) lors du démarrage pour entrer dans le menu de configuration de Luma3DS.
|
||||
Vous pouvez maintenant maintenir (Start) au démarrage pour lancer le menu de chainloader Luma3DS (Notez que le menu du chainloader Luma3DS ne s’affiche que s’il détecte plus d'un payload).
|
||||
Vous pouvez maintenant maintenir (Start) + (Select) + (X) au démarrage pour dump le bootrom ARM11 (`boot11.bin`), le bootrom ARM9 (`boot9.bin`) et l'OTP unique de votre console (`OTP.bin`) dans le dossier `/boot9strap/` de votre carte SD (Notez que cela n'affichera aucune notification).
|
||||
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
|
||||
Vous pouvez maintenant appuyer simultanément sur (L) + (Bas) + (Select) pour démarrer le menu Rosalina intégré à Luma3DS. Pour une liste plus complète des fonctionnalités de Rosalina, vous pouvez vous rendre sur [la page GitHub de Luma3DS v8.0](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
|
||||
{% endcapture %}
|
||||
|
||||
<div class="notice--info">{{ notice-6 | markdownify }}</div>
|
||||
|
|
|
|||
|
|
@ -56,7 +56,7 @@ La version de votre console peut être trouvée en bas à droite de l'écran sup
|
|||
</tr>
|
||||
<tr>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2">TOUTES LES VERSIONS <br></td>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installing boot9strap (ntrboothax)</a><br><sub>(Requires a Compatible Flashcart)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installing boot9strap (Hardmod)</a><br><sub>(Requires Soldering)</sub></p></td>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installer boot9strap (ntrboothax)</a><br><sub>(Nécessite un Linker compatible)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">ou</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installation boot9strap (Hardmod)</a><br><sub>(Nécessite de la soudure)</sub></p></td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
|
@ -103,7 +103,7 @@ La version de votre console peut être trouvée en bas à droite de l'écran sup
|
|||
</tr>
|
||||
<tr>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2">TOUTES LES VERSIONS <br></td>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installing boot9strap (ntrboothax)</a><br><sub>(Requires a Compatible Flashcart)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installing boot9strap (Hardmod)</a><br><sub>(Requires Soldering)</sub></p></td>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installer boot9strap (ntrboothax)</a><br><sub>(Nécessite un Linker compatible)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">ou</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installation boot9strap (Hardmod)</a><br><sub>(Nécessite de la soudure)</sub></p></td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
|
@ -26,7 +26,7 @@ Avant de commencer, les utilisateurs de Windows devraient permettre d'afficher l
|
|||
Avant de commencer, assurez vous que votre carte SD n'a pas d'erreurs en utilisant [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), ou [F3X (Mac)](f3x-(mac))!
|
||||
{: .notice--warning}
|
||||
|
||||
Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! Cela inclut des consoles des régions CHN et TWN qui étaient précédemment impiratables !
|
||||
Notez bien que les nouvelles méthodes [ntrboothax](installing-boot9strap-(ntrboothax)) et [hardmod](installing-boot9strap-(hardmod)) fonctionnent dans *tous appareils, régions, et versions*! Cela inclut des consoles des régions CHN et TWN qui étaient précédemment impiratables !
|
||||
{: .notice--success}
|
||||
|
||||
{% capture notice-1 %}
|
||||
|
|
|
|||
|
|
@ -46,7 +46,7 @@ title: "Installer boot9strap (2xrsa)"
|
|||
1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
|
||||
+ If you get an error, just continue the next page
|
||||
+ Si vous obtenez une erreur, continuez à la prochaine page
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -50,7 +50,7 @@ Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une E
|
|||
1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
|
||||
+ If you get an error, just continue the next page
|
||||
+ Si vous obtenez une erreur, continuez à la prochaine page
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -165,7 +165,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
|
|||
1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
|
||||
+ If you get an error, just continue the next page
|
||||
+ Si vous obtenez une erreur, continuez à la prochaine page
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -181,7 +181,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
|
|||
1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
|
||||
+ If you get an error, just continue the next page
|
||||
+ Si vous obtenez une erreur, continuez à la prochaine page
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
title: "Installer boot9strap (Hardmod)"
|
||||
---
|
||||
|
||||
Un excellent guide pour obtenir un hardmod se trouve [ici](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
|
||||
Un excellent guide pour obtenir un hardmod se trouve [ici](https://gbatemp.net/threads/414498/). Si vous avez une New 3DS, lisez [cette page](https://github.com/Plailect/Guide/issues/681) et [cette page](https://github.com/Plailect/Guide/issues/1185) avant de modifier ta 3DS.
|
||||
{: .notice--info}
|
||||
|
||||
Ceci est une implémentation de l'exploit "FIRM partitions known-plaintext" qui est décrit [ici](https://www.3dbrew.org/wiki/3DS_System_Flaws).
|
||||
|
|
@ -82,7 +82,7 @@ Cela fonctionne sur la New3DS, Old3DS Old2DS sur *toutes* les versions pour lesq
|
|||
1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
|
||||
+ If you get an error, just continue the next page
|
||||
+ Si vous obtenez une erreur, continuez à la prochaine page
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -57,7 +57,7 @@ Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une E
|
|||
1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
|
||||
+ If you get an error, just continue the next page
|
||||
+ Si vous obtenez une erreur, continuez à la prochaine page
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -51,7 +51,7 @@ Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une E
|
|||
1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
|
||||
+ If you get an error, just continue the next page
|
||||
+ Si vous obtenez une erreur, continuez à la prochaine page
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -1,23 +1,23 @@
|
|||
---
|
||||
title: "Installing boot9strap (ntrboothax)"
|
||||
title: "Installer boot9strap (ntrboothax)"
|
||||
---
|
||||
|
||||
This is a placeholder page for the upcoming "ntrboothax" exploit.
|
||||
Ceci est une page réservée pour le prochain exploit, ntrboothax.
|
||||
{: .notice--primary}
|
||||
|
||||
{% capture notice-1 %}
|
||||
|
||||
The ntrboothax exploit will require the following:
|
||||
Le programme ntrboothax nécessitera:
|
||||
|
||||
+ A DS / DSi flashcart
|
||||
+ Exact flashcart compatibility will be added when this exploit is released
|
||||
+ A small magnet
|
||||
+ Note that this is only required on folding style 3DSs, not 2DSs
|
||||
+ This is because the exploit requires your device to enter sleep mode while still having access to the buttons
|
||||
+ The magnet should be able to trigger your device's sleep mode by holding it on or around the ABXY buttons
|
||||
+ *One* of the following methods of installing ntrboothax to your flashcart:
|
||||
+ A [Powersaves](https://amzn.to/2fb3VY7)
|
||||
+ Another 3DS or 2DS already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
|
||||
+ Un Linker DS / DSi
|
||||
+ Un récapitulatif de la compatibilité avec chaque flashcart sera ajouté lorsque l'exploit sera dévoilé
|
||||
+ Un petit aimant
|
||||
+ Notez que cela est uniquement nécessaire pour les modèles de 3DS pliantes, pas 2DS
|
||||
+ C'est parce que l'exploit demande de mettre la console en veille tout en ayant accès aux boutons
|
||||
+ L’aimant doit être en mesure de déclencher le mode veille de votre console en le tenant sur ou autour des boutons ABXY
|
||||
+ *Une* des méthodes suivantes pour installer ntrboothax pour votre linker:
|
||||
+ Une [Powersaves] (https://amzn.to/2fb3VY7)
|
||||
+ Une autre 3DS ou 2DS exécute déjà une sorte de custom firmware (comme boot9strap ou arm9loaderhax)
|
||||
|
||||
{% endcapture %}
|
||||
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ sitemap: false
|
|||
+ [Installer boot9strap (Hardmod)](installing-boot9strap-(hardmod))
|
||||
+ [Installer boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
|
||||
+ [Installer boot9strap (MSET)](installing-boot9strap-(mset))
|
||||
+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
|
||||
+ [Installer boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
|
||||
+ [Déplacer l'EmuNAND](move-emunand)
|
||||
+ [NTR et Clubic Ninja](ntr-and-cubic-ninja)
|
||||
+ [Changement de Région](region-changing)
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Les exploits basé sur le navigateur (tel que browserhax ou 2xrsa) sont parfois
|
|||
1. Si vous avez auparavant réalisé un downgrade via Gateway, assurez-vous que vous utilisez la dernière version de Luma3DS (v6.2.3 ou plus récent, au minimum)
|
||||
1. Si votre NAND est entre la version 3.0.0 et 4.5.0, faites ceci :
|
||||
+ Assurez-vous d'utiliser la dernière version de Luma3DS (v6.6 ou plus, au moins)
|
||||
+ Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) et renommez-le en `firmware.bin`
|
||||
+ Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) et renommez-le `native.firm`
|
||||
+ Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copiez `firmware.bin` et`cetk` dans le répertoire `/luma/` sur votre carte SD
|
||||
+ Copiez `native.firm` et `cetk` au dossier `/luma/` dans ta carte SD
|
||||
+ Si vous avez la version 7.1 de Luma3DS ou inférieur. renommez le fichier `native.firm` en `firmware.bin`
|
||||
+ Supprimez ces deux fichiers après avoir mis à jour de votre console
|
||||
1. Essayer de réaliser le [CTRtransfer en 9.2.0](9.2.0-ctrtransfer)
|
||||
1. Pour obtenir de l'aide, demandez de l'aide à [Nintendo Homebrew sur Discord(Anglais)](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -2,10 +2,10 @@
|
|||
title: "Mettre à jour B9S"
|
||||
---
|
||||
|
||||
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
|
||||
Cette page s'adresse aux utilisateurs de boot9strap déjà présent sur leurs console afin de le mettre à jour vers la dernière version.
|
||||
{: .notice--info}
|
||||
|
||||
Note that the recent major release of Luma3DS is *not* compatible with boot9strap version 1.0. It *requires* you to update your boot9strap installation to version 1.2 by following the instructions on this page.
|
||||
Notez bien que la récent version majeure de Luma3DS n'est pas compatible avec la version 1.0 de boot9strap. Cela *nécessite* que vous mettez à jour votre installation de boot9strap vers la version 1.2 en suivant les instructions de cette page.
|
||||
{: .notice--warning}
|
||||
|
||||
{% capture notice-1 %}
|
||||
|
|
@ -41,7 +41,7 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants
|
|||
|
||||
1. Éteignez votre 3DS
|
||||
1. Insérez votre carte SD dans votre ordinateur
|
||||
1. **Leave the old (v7.1) version of Luma3DS (`boot.firm`) as it is. You will update this later.**
|
||||
1. **Laissez le (`boot.firm`) de l'ancienne version de Luma3DS (v7.1) tel qu'il est. Vous le mettrez à jour plus tard.**
|
||||
1. Copiez `boot.3dsx` à la racine de votre carte SD
|
||||
1. Créez un dossier à la racine de votre carte SD nommé `boot9strap`
|
||||
1. Copiez le fichier `GodMode9.firm` de l'archive GodMode9 `.zip` dans le dossier `/luma/payloads/` sur votre carte SD
|
||||
|
|
@ -57,7 +57,7 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants
|
|||
1. Quand cela est demandé, appuyez sur la combinaison de boutons donnée pour installer boot9strap
|
||||
1. Une fois que c'est fini, appuez sur (A) pour redémarrer l'appareil.
|
||||
1. Éteignez votre 3DS
|
||||
+ Note that you will receive the error `Unsupported launcher (argc = 0)` until you follow the rest of the instructions on this page
|
||||
+ Notez que vous recevrez l'erreur `Unsupported launcher (argc = 0)` jusqu'à ce que vous suivez le reste des instructions sur cette page
|
||||
|
||||
##### Section III - Mettre à jour Luma3DS
|
||||
|
||||
|
|
@ -109,5 +109,5 @@ ___
|
|||
Notez que les fichiers `.bak` dans le dossier `/boot9strap/` sur votre carte SD sont uniquement nécessaires dans le cas où une installation de boot9strap aurait échoué. Une fois que vous avez terminé l'installation, vous pouvez supprimer le dossier `boot9strap`.
|
||||
{: .notice--info}
|
||||
|
||||
You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
|
||||
Vous pouvez maintenant appuyer simultanément sur (L) + (Bas) + (Select) pour démarrer le menu Rosalina intégré à Luma3DS. Pour une liste plus complète des fonctionnalités de Rosalina, vous pouvez vous rendre sur [la page GitHub de Luma3DS v8.0](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)
|
||||
{: .notice--info}
|
||||
|
|
@ -62,9 +62,9 @@ title: "סיום התהליך"
|
|||
+ תעתיקו את `boot.firm` אל שורש כרטיס הSD שלכם *(תשכתבו את הקובץ הקיים אם יש)*
|
||||
+ תחליפו את ה`boot.firm` הזה עם זה מ[הגרסה העדכנית של Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) אחרי שאתם מעדכנים את הקונסולה מאוחר יותר בהוראות
|
||||
1. אם המכשיר שלכם הוא על גרסה בין 3.0.0 ל-4.5.0, המכשיר שלכם שלכם לא יאתחל עד שתורידו את הקושחה המתאימה:
|
||||
תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ושנו לו את השם ל-`firmware.bin`
|
||||
תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ושנו לו את השם ל-`native.firm`
|
||||
+ תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ תעתיקו את `firmware.bin` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
|
||||
+ תעתיקו את `native.firm` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
|
||||
+ תמחקו את שני הקבצים האלו אחרי שאתם מעדכנים את המכשיר שלכם אחר כך בהוראות
|
||||
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
|
||||
1. תפעילו את המכשיר
|
||||
|
|
@ -82,7 +82,7 @@ title: "סיום התהליך"
|
|||
+ אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
|
||||
+ אם זה ממשיך לתת לכם שגיאה והקונסולה שלכם מתחת לגרסה 9.2.0, עקבו אחרי [9.2.0 CTRtransfer](9.2.0-ctrtransfer), ואז תנסו לעדכן שוב
|
||||
1. אם הקונסולה שלכם הייתה מתחת לגרסה 9.0.0 לפני שעדכנתם אותה, תחליפו את ה`boot.firm` על שורש כרטיס הSD שלכם עם זה מ[הגרסה העדכנית של Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. אם הקונסולה שלכם הייתה על גרסה בין 3.0.0 ו4.5.0 לפני שעדכנתם, תמחקו את `firmware.bin` ואת `cetk` מתיקיית `/luma/` בכרטיס הSD שלכם
|
||||
1. אם הקונסולה שלכם הייתה על גרסה בין 3.0.0 ו4.5.0 לפני שעדכנתם, תמחקו את `native.firm` ואת `cetk` מתיקיית `/luma/` בכרטיס הSD שלכם
|
||||
|
||||
##### חלק III - הפעלת FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -146,9 +146,10 @@ title: "פתרון בעיות"
|
|||
1. אם שנמכתם עם Gateway, תבדקו שאתם משתמשים בגרסה העדכנית של Luma3DS, לפחות 6.2.3
|
||||
1. אם הNAND שלכם היה בין הגרסאות 3.0.0 ו4.5.0 תעשו את זה:
|
||||
תבדקו שאתם משתמשים בגרסה העדכנית של Luma3DS, לפחות 6.6
|
||||
תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ושנו לו את השם ל-`firmware.bin`
|
||||
תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ושנו לו את השם ל-`native.firm`
|
||||
+ תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ תעתיקו את `firmware.bin` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
|
||||
+ תעתיקו את `native.firm` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
|
||||
+ אם יש לכם את Luma3DS בגרסה 7.1 או נמוך יותר, תשנו את השם של `native.firm` אל`firmware.bin`
|
||||
+ תמחקו את שני הקבצים האלו לאחר שתעדכנו את ה-3DS שלכם
|
||||
1. תנסו לעקוב אחרי [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. תבקשו עזרה ב[Nintendo Homebrew על Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Durante la guida verranno anche configurate le seguenti applicazioni:
|
|||
+ Copia il file `boot.firm` nella directory principale della tua scheda SD *(sovrascrivendo eventualmente qualunque file già presente)*
|
||||
+ Sostituisci questo file `boot.firm` con quello dell'[ultima versione di Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) dopo aver aggiornato la console seguendo le istruzioni riportate nelle sezioni successive
|
||||
1. Se la tua console è ad una versione del software compresa tra 3.0.0 e 4.5.0 (incluse), non si avvierà finché non avrai scaricato manualmente la versione del software richiesta:
|
||||
+ Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e rinominalo `firmware.bin`
|
||||
+ Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e rinominalo `native.firm`
|
||||
+ Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copia i file `firmware.bin` e `cetk` nella cartella `/luma/` della tua scheda SD
|
||||
+ Copia i file `native.firm` e `cetk` nella cartella `/luma/` della tua scheda SD
|
||||
+ Elimina entrambi i file dopo aver aggiornato la console nel relativo passaggio di questa sezione
|
||||
1. Reinserisci la scheda SD nel Nintendo 3DS
|
||||
1. Accendi la console
|
||||
|
|
@ -82,7 +82,7 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
|
|||
+ Se ottieni un errore, imposta i DNS della connessione di rete in modo che vengano ottenuti automaticamente
|
||||
+ Se continui ad ottenere un errore e la tua NAND è ad una versione precedente di 9.2.0, [segui la guida per il CTRTransfer 9.2.0](9.2.0-ctrtransfer), poi riprova ad aggiornare la console
|
||||
1. Se la tua console era ad una versione del sistema inferiore a 9.0.0 prima dell'aggiornamento, sostituisci il file `boot.firm` nella directory principale della tua scheda SD con quello dell'[ultima versione di Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Se la tua console era ad una versione del sistema compresa tra 3.0.0 e 4.5.0 prima dell'aggiornamento, elimina i file `firmware.bin` e `cetk` dalla cartella `/luma/` sulla tua scheda SD
|
||||
1. Se la tua console era ad una versione del sistema compresa tra 3.0.0 e 4.5.0 prima dell'aggiornamento, elimina i file `native.firm` e `cetk` dalla cartella `/luma/` sulla tua scheda SD
|
||||
|
||||
##### Sezione III - Avviare FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Questo tipo di exploit (come browserhax o 2xrsa) è instabile e tende a crashare
|
|||
1. Se in precedenza hai effettuato un downgrade tramite Gateway, assicurati di stare utilizzando l'ultima versione di Luma3DS (almeno v6.2.3)
|
||||
1. Se la versione di sistema della tua NAND è compresa tra 3.0.0 e 4.5.0, devi seguire i seguenti passaggi:
|
||||
+ Assicurati di stare utilizzando l'ultima versione di Luma3DS (almeno v6.6)
|
||||
+ Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e rinominalo `firmware.bin`
|
||||
+ Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e rinominalo `native.firm`
|
||||
+ Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copia i file `firmware.bin` e `cetk` nella cartella `/luma/` della tua scheda SD
|
||||
+ Copia i file `native.firm` e `cetk` nella cartella `/luma/` della tua scheda SD
|
||||
+ Se la versione di Luma3DS è 7.1 o inferiore, rinomina il file `native.firm` in `firmware.bin`
|
||||
+ Elimina entrambi i file dopo aver aggiornato la tua console
|
||||
1. Prova ad eseguire un [CTRTransfer 9.2.0](9.2.0-ctrtransfer)
|
||||
1. Chiedi aiuto su [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp) (in inglese).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ [このファイル](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)をダウンロードし、名前を`firmware.bin`に変更します
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ [このファイル](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)をダウンロードします
|
||||
+ `firmware.bin`と`cetk`をSDカードの`/luma/`フォルダにコピーします
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ エラーが発生すれば、DNS設定を「自動」に変更してください
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
|
|||
1. Gatewayでダウングレードしたことがある場合、最新バージョンのLuma3DSを持っていることを確保します（少なくともv6.2.3またはそれ以降）
|
||||
1. NANDのバージョンは3.0.0と4.5.0の範囲内にある場合、下記の指示に従います：
|
||||
+ 最新バージョンのLuma3DSを使用していることを確保します（少なくともv6.6またはそれ以降）
|
||||
+ [このファイル](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)をダウンロードし、名前を`firmware.bin`に変更します
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ [このファイル](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)をダウンロードします
|
||||
+ `firmware.bin`と`cetk`をSDカードの`/luma/`フォルダにコピーします
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ 이 [파일](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)을 다운로드받고 이름을 `firmware.bin`으로 바꿔 주세요.
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ 이 [파일](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)을 다운로드해 주세요.
|
||||
+ `firmware.bin`과 `cetk`를 SD 카드의 `/luma/` 폴더에 복사해 주세요.
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. SD 카드를 기기에 다시 삽입해 주세요.
|
||||
1. 기기를 시작해 주세요.
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ 오류가 발생한다면, DNS 설정을 "자동"으로 설정해 주세요.
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -145,9 +145,10 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
|
|||
1. Gateway를 통해 다운그레이드한 적이 있다면 Luma3DS가 최신 버전 (v6.2.3 또는 그 이상)인지 확인해 주세요.
|
||||
1. 3.0.0~4.5.0 버전이라면, 다음 과정을 수행해 주세요:
|
||||
+ Luma3DS가 최신 버전 (v6.6 또는 그 이상)인지 확인해 주세요.
|
||||
+ 이 [파일](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)을 다운로드받고 이름을 `firmware.bin`으로 바꿔 주세요.
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ 이 [파일](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)을 다운로드해 주세요.
|
||||
+ `firmware.bin`과 `cetk`를 SD 카드의 `/luma/` 폴더에 복사해 주세요.
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ 기기를 업데이트한 뒤 두 파일을 삭제해 주세요.
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Semasa proses ini, kami juga akan memasang program-program berikut:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Muat turun [fail ini](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) dan tukar namanya kepada `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Muat turun [fail ini](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Salin `firmware.bin` dan `cetk` letakkan ke folder `/luma/` pada kad SD anda
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Jika terdapat error, set DNS settings anda ke "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Exploitasi berdasarkan browser (seperti browserhax atau 2xrsa) kebiasaannya tida
|
|||
1. Jika sebelum ini anda downgrade menggunakan Gateway, sila pastikan anda menggunakan versi Luma3DS terkini (v6.2.3 atau tinggi, sekurang-kurangnya)
|
||||
1. Jika versi NAND anda antara 3.0.0 dan 4.5.0, buat seperti berikut:
|
||||
+ Pastikan anda menggunakan versi Luma 3ds terikini (v6.6 atau tinggi, sekurang-kurangnya)
|
||||
+ Muat turun [fail ini](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) dan tukar namanya kepada `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Muat turun [fail ini](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Salin `firmware.bin` dan `cetk` letakkan ke folder `/luma/` pada kad SD anda
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Tijdens dit proces zullen we ook de volgende programma's installeren:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) en hernoem het bestand naar `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Kopieer `firmware.bin` en `cetk` naar de `/luma/` map op je SD kaart
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Stop je SD kaart terug in je 3DS
|
||||
1. Zet je 3DS aan
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Als dit je een foutmelding geeft, zet dan je DNS instellingen op "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Op de browser gebaseerde exploits (zoals browserhax or 2xrsa) zijn vaak erg onst
|
|||
1. Als je voorheen met Gateway de 3DS hebt gedowngrade, zorg er dan voor dat je de laatste Luma3DS-versie gebruikt (op het minst v6.2.3 of hoger)
|
||||
1. Als je NAND een versie tussen 3.0.0 en 4.5.0 heeft, doe het volgende:
|
||||
+ zorg ervoor dat je de laatste Luma3DS-versie (ten minste v6.6 or hoger)
|
||||
+ Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) en hernoem het bestand naar `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Kopieer `firmware.bin` en `cetk` naar de `/luma/` map op je SD kaart
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Verwijder beide bestanden na het updaten van je 3DS
|
||||
1. Probeer de [9.2.0 ctrtransfer](9.2.0-ctrtransfer) te volgen
|
||||
1. Vraag om hulp op [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Under denne prossesen, vil vi også sette opp program som følgende:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) og endre navnet til `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Kopier `firmware.bin` og `cetk` til `/luma/` mappen på SD-kortet
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Sett inn SD-kortet i konsollen igjen
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Hvis dette gir deg en feil, sett DNS-innstillingene til "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Nettleserbaserte exploits (som browserhax eller 2xrsa) er ofte ustabile og krasj
|
|||
1. Hvis du nedgraderte med Gateway tidligere, må du kontrollere at du bruker siste utgave av Luma3DS (v6.2.3 eller nyere)
|
||||
1. Hvis NANDen din er på en versjon mellom 3.0.0 og 4.5.0 gjør følgende:
|
||||
+ Kontroller at du bruker nyeste utgave av Luma3DS (v6.6 eller høyere, i minst)
|
||||
+ Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) og endre navnet til `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Kopier `firmware.bin` og `cetk` til `/luma/` mappen på SD-kortet
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Prøv å følg [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Podczas tego procesu zainstalujemy również takie programy jak:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Pobierz [ten plik](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) i zmień jego nazwę na `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Pobierz [ten plik](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Skopiuj pliki `firmware.bin` i `cetk` do folderu `/luma/` na twojej karcie SD
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Jeśli przy próbie aktualizacji pojawia się błąd, ustaw swoje DNS (w ustawieniach połączenia internetowego 3DS) na "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Exploity wykorzystujące luki w przeglądarce (takie jak browserhax albo 2xrsa)
|
|||
1. Jeśli konsola miała wcześniej obniżaną wersję firmware przy użyciu flashcartu Gateway, upewnij się że używasz najnowszej wersji Luma3DS (minimum v6.2.3 lub wyższej)
|
||||
1. Jeśli NAND twojej konsoli zawiera wersję firmware pomiędzy 3.0.0 a 4.5.0, wykonaj poniższe kroki:
|
||||
+ Upewnij się, że korzystasz z najnowszej wersji Luma3DS (minimum v6.6 lub wyższej)
|
||||
+ Pobierz [ten plik](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) i zmień jego nazwę na `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Pobierz [ten plik](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Skopiuj pliki `firmware.bin` i `cetk` do folderu `/luma/` na twojej karcie SD
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Durante este processo, também configuramos alguns programas como os seguintes:
|
|||
+ Copie `boot.firm` para a raiz do seu cartão SD *(sobrescreva arquivos existentes)*
|
||||
+ Substitua este `boot.firm` pelo o da [versão mais recente do Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) depois de atualizar seu dispositivo mais tarde nestas instruções
|
||||
1. Se seu dispositivo estiver em uma versão entre 3.0.0 e 4.5.0 (inclusive), o dispositivo não irá iniciar até você baixar manualmente o firmware necessário:
|
||||
+ Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e renomeie-o para `firmware.bin`
|
||||
+ Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e renomeie-o para `native.firm`
|
||||
+ Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copie os arquivos `firmware.bin` e `cetk` para a pasta `/luma/` do seu cartão SD
|
||||
+ Copie `native.firm` e `cetk` para a pasta `/luma/` no seu cartão SD
|
||||
+ Exclua ambos os arquivos depois de atualizar seu dispositivo mais tarde neste guia
|
||||
1. Reinsira seu cartão SD no seu dispositivo
|
||||
1. Ligue o seu dispositivo
|
||||
|
|
@ -82,7 +82,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
|
|||
+ Se isso der um erro, defina suas configurações de DNS para "Automático"
|
||||
+ Se isso ainda lhe dá um erro e sua NAND está abaixo de 9.2.0, [siga CTRTransfer para 9.2.0](9.2.0-ctrtransfer) e, em seguida, tente atualizar novamente
|
||||
1. Se seu dispositivo estava em uma versão abaixo da 9.0.0 antes de atualizar, substitua `boot.firm` na raiz do seu cartão SD pelo o da [versão mais recente do Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Se o seu dispositivo estava em uma versão entre 3.0.0 e 4.5.0 antes de atualizar, apague `firmware.bin` e `cetk` da pasta `/luma/` no seu cartão SD
|
||||
1. Se o seu dispositivo estava em uma versão entre 3.0.0 e 4.5.0 antes de atualizar, apague `native.firm` e `cetk` da pasta `/luma/` no seu cartão SD
|
||||
|
||||
##### Seção III - Iniciando o FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Exploits do navegador (como browserhax ou 2xrsa) são normalmente instáveis e f
|
|||
1. Caso você tenha realizado um downgrade com algum Gateway anteriormente, certifique-se de estar usando a versão mais recente do Luma3DS (v6.2.3 ou superior, pelo menos)
|
||||
1. Se sua NAND estiver com a firmware numa versão entre 3.0.0 e 4.5.0, faça o seguinte:
|
||||
+ Certifique-se de que você está usando o Luma3DS versão 6.6 ou mais recente
|
||||
+ Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e renomeie-o para `firmware.bin`
|
||||
+ Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e renomeie-o para `native.firm`
|
||||
+ Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copie os arquivos `firmware.bin` e `cetk` para a pasta `/luma/` do seu cartão SD
|
||||
+ Copie `native.firm` e `cetk` para a pasta `/luma/` no seu cartão SD
|
||||
+ Se você tem o Luma3DS na versão 7.1 ou inferior, renomeie `native.firm` para `firmware.bin`
|
||||
+ Apague ambos os arquivos depois de atualizar o dispositivo
|
||||
1. Tente seguir [CTRTransfer para 9.2.0](9.2.0-ctrtransfer)
|
||||
1. Peça ajuda em [Nintendo Homebrew no Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Se encontrares algum erro, muda as configurações da DNS para "automático"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. Se fizeste algum downgrade nessa consola com Gateway, certifica-te que estás a usar a última versão do Luma3DS (v6.2.3 ou maior, pelo menos)
|
||||
1. Se a tua NAND estiver entre as versões 3.0.0 e 4.5.0, faz o seguinte:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Dacă aceasta vă da o eroare, setați DNS-ul pe "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ title: "С A9LH до B9S"
|
|||
* <i class="fa fa-magnet" aria-hidden="true" title="Это magnet-ссылка. Воспользуйтесь торрент-клиентом, чтобы скачать этот файл."></i> - **Только пользователи New 3DS:** [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
|
||||
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
|
||||
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
|
||||
* Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
|
||||
* Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
|
||||
* Свежая версия [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@ title: "Завершение установки"
|
|||
|
||||
1. Выключите консоль
|
||||
1. Вставьте SD-карту в компьютер
|
||||
1. Copy `boot.3dsx` to the root of your SD card *(overwrite existing files)*
|
||||
1. Скопируйте `boot.3dsx` в корень SD-карты *(перезаписывайте существующие файлы)*
|
||||
1. Скопируйте `FBI.3dsx` в папку `/3ds/` на SD-карте
|
||||
1. Создайте папку `cias` в корне SD-карты, если таковой нет
|
||||
1. Создайте папку `hblauncherloader` в корне SD-карты, если таковой нет
|
||||
|
|
@ -57,14 +57,14 @@ title: "Завершение установки"
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/cf0b05e/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. Если ваше устройство использует прошивку версии ниже 9.0.0, консоль не запустится до тех пор, пока вы не установите альтернативную версию Luma3DS:
|
||||
+ Скачайте [альтернативную версию Luma3DS]({{ base_path }}/luma_legacy/cf0b05e/boot.firm)
|
||||
+ Скопируйте `boot.firm` в корень SD-карты *(перезаписывайте существующие файлы)*
|
||||
+ Замените этот `boot.firm` на файл из [свежей версии Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) после обновления системы далее по инструкции
|
||||
1. Если ваше устройство использует прошивку версии от 3.0.0 до 4.5.0, консоль не запустится до тех пор, пока вы вручную не скачаете нужные файлы прошивки:
|
||||
+ Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) и переименуйте его в `firmware.bin`
|
||||
+ Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) и переименуйте его в `native.firm`
|
||||
+ Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Скопируйте `firmware.bin` и `cetk` в папку `/luma/` на SD-карте
|
||||
+ Скопируйте `native.firm` и `cetk` в папку `/luma/` на SD-карте
|
||||
+ Удалите оба этих файла позже, после обновления устройства
|
||||
1. Вставьте SD-карту обратно в консоль
|
||||
1. Включите консоль
|
||||
|
|
@ -81,8 +81,8 @@ title: "Завершение установки"
|
|||
+ Обновление консоли с установленным B9S + Luma (установленых у вас) безопасно
|
||||
+ При появлении ошибки, поставьте в настройках подключения, в настройках DNS "Получать DNS автоматически" в положение "Да"
|
||||
+ Если вы все еще получаете ошибку и версия вашего NAND ниже 9.2.0, [выполните 9.2.0 CTRTransfer](9.2.0-ctrtransfer) и попробуйте обновиться еще раз
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. Если ваше устройство использовало прошивку версии ниже 9.0.0 до обновления, замените `boot.firm` в корне SD-карты на файл из [свежей версии Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Если ваше устройство использовало прошивку версии от 3.0.0 до 4.5.0 до обновления, удалите `native.firm` и `cetk` из папки `/luma/` на SD-карте
|
||||
|
||||
##### Часть III - Запуск FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -55,8 +55,8 @@ title: "Начало (New 3DS)"
|
|||
<td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(dsiware)">Установка boot9strap (DSiWare)</a></td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2">ALL VERSIONS<br></td>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installing boot9strap (ntrboothax)</a><br><sub>(Requires a Compatible Flashcart)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installing boot9strap (Hardmod)</a><br><sub>(Requires Soldering)</sub></p></td>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2">ВСЕ ВЕРСИИ<br></td>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Установка boot9strap (ntrboothax)</a><br><sub>(Требуется совместимый флешкартридж)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Установка boot9strap (Hardmod)</a><br><sub>(Требуется пайка)</sub></p></td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
|
@ -102,8 +102,8 @@ title: "Начало (Old 3DS)"
|
|||
<td style="text-align: center; font-weight: bold;" colspan="2"><a href="installing-boot9strap-(dsiware)">Установка boot9strap (DSiWare)</a></td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2">ALL VERSIONS<br></td>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Installing boot9strap (ntrboothax)</a><br><sub>(Requires a Compatible Flashcart)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installing boot9strap (Hardmod)</a><br><sub>(Requires Soldering)</sub></p></td>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2">ВСЕ ВЕРСИИ<br></td>
|
||||
<td style="text-align: center; font-weight: bold;" colspan="2"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(ntrboothax)">Установка boot9strap (ntrboothax)</a><br><sub>(Требуется совместимый флешкартридж)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Установка boot9strap (Hardmod)</a><br><sub>(Требуется пайка)</sub></p></td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
|
@ -26,7 +26,7 @@ title: "Начало"
|
|||
Прежде чем начать, рекомендуется проверить свою SD-карту на ошибки с помощью [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), или [F3X (Mac)](f3x-(mac))!
|
||||
{: .notice--warning}
|
||||
|
||||
Note that the new [ntrboothax](installing-boot9strap-(ntrboothax)) and [hardmod](installing-boot9strap-(hardmod)) methods work on *all devices, regions, and versions*! Это включает устройства CHN и TWN регионов, которые были ранее невзламываемыми!
|
||||
Обратите внимание, что новые методы [ntrboothax](installing-boot9strap-(ntrboothax)) и [hardmod](installing-boot9strap-(hardmod)) работают на *всех устройствах, регионах и версиях*! Это включает устройства CHN и TWN регионов, которые были ранее невзламываемыми!
|
||||
{: .notice--success}
|
||||
|
||||
{% capture notice-1 %}
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ Homebrew Launcher имеет множество точек входа, или м
|
|||
| <sub> | <sub>Что понадобится | <sub>Издания | <sub>Устройства | <sub>Регионы | <sub>Версии игры | <sub>Версии прошивки |
|
||||
|:-:|:-:|:-:|:-:|:-:|:-:|:-:|
|
||||
| <sub>[browserhax](https://yls8.mtheall.com/3dsbrowserhax.php) | <sub>Ничего | <sub>Предустановлено | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>Все | <sub>от 9.0.0-2 до 11.0.0-33 включительно |
|
||||
| <sub>[oot3dhax](https://github.com/yellows8/oot3dhax) | <sub>[*Ocarina of Time 3D*](https://amzn.to/2fkaKdp), <br> Either a powersaves or another 3DS which already has the Homebrew Launcher | <sub>Cart | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>All | <sub>9.0.0-X up to and including 11.4.0-X |
|
||||
| <sub>[oot3dhax](https://github.com/yellows8/oot3dhax) | <sub>[*Ocarina of Time 3D*](https://amzn.to/2fkaKdp), <br> Powersaves или другая 3DS с доступом к Homebrew Launcher | <sub>Картридж | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>Все | <sub>от 9.0.0-X до 11.4.0-X включительно |
|
||||
| <sub>[smashbroshax](https://gbatemp.net/threads/397194/) | <sub>[*Super Smash Bros*](https://amzn.to/2ftGA72) | <sub>Картридж, eShop | <sub>New | <sub>EUR, JPN, USA | <sub><1.1.3, <br> Картриджи с "amiibo" на обложке идут с версией 1.1.4 | <sub>от 9.0.0-X до 11.3.0-X включительно |
|
||||
| <sub>[supermysterychunkhax](https://smd.salthax.org/) | <sub>[*Pokemon Super Mystery Dungeon*](https://amzn.to/2ebxZ75), <br> Другая 3DS с доступом к Homebrew Launcher | <sub>Картридж | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>Все | <sub>от 9.9.0-X (USA/JPN) / 10.2.0-X (EUR) до 11.0.0-X включительно |
|
||||
| <sub>[freakyhax](http://plutooo.github.io/freakyhax/) | <sub>[*Freakyforms Deluxe*](https://amzn.to/2f6eHO7) | <sub>eShop, Картридж | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>Все | <sub>от 9.0.0-X до 11.3.0-X включительно |
|
||||
|
|
@ -39,7 +39,7 @@ Homebrew Launcher имеет множество точек входа, или м
|
|||
| <sub>[BASICSploit](https://mrnbayoh.github.io/basicsploit/) | <sub>[*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | <sub>eShop | <sub>New, Old, 2DS | <sub>USA | <sub>3.2.1 | <sub>от 9.0.0-X до 11.0.0-X включительно |
|
||||
| <sub>[smilehax](https://plutooo.github.io/smilehax/) | <sub>[*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | <sub>eShop | <sub>New, Old, 2DS | <sub>JPN, USA | <sub>3.3.1 | <sub>от 9.0.0-X до 11.0.0-X включительно |
|
||||
| <sub>[stickerhax](https://github.com/yellows8/stickerhax) | <sub>[*Paper Mario: Sticker Star*](https://amzn.to/2f6aDx8), <br> Другая 3DS с доступом к Homebrew Launcher | <sub>eShop, Картридж | <sub>New, Old, 2DS | <sub>EUR, JPN, KOR, USA | <sub>Все | <sub>от 9.0.0-X до 11.3.0-X включительно |
|
||||
| <sub>[Ninjhax 2](http://smealum.github.io/ninjhax2/) | <sub>[*Cubic Ninja*](https://amzn.to/2eRI1by) | <sub>eShop, Cart | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>All | <sub>9.0.0-X up to and including 11.4.0-X |
|
||||
| <sub>[Ninjhax 2](http://smealum.github.io/ninjhax2/) | <sub>[*Cubic Ninja*](https://amzn.to/2eRI1by) | <sub>eShop, Картридж | <sub>New, Old, 2DS | <sub>EUR, JPN, USA | <sub>Все | <sub>от 9.0.0-X до 11.4.0-X включительно |
|
||||
| <sub>[GenHax](https://github.com/svanheulen/genhax_proxy_installer) | <sub>[*Monster Hunter X*](http://amzn.to/2gsk6Tk) | <sub>eShop | <sub>New | <sub>JPN | <sub>Все | <sub>от 9.9.0-X до 11.2.0-X включительно |
|
||||
{: .notice--info}
|
||||
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ title: "Установка boot9strap (2xrsa)"
|
|||
#### Что понадобится
|
||||
|
||||
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
|
||||
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
|
||||
* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
|
||||
|
||||
|
|
@ -46,7 +46,7 @@ title: "Установка boot9strap (2xrsa)"
|
|||
1. Нажимая (A) выберите следующие пункты:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
|
||||
+ If you get an error, just continue the next page
|
||||
+ Если появляется ошибка, просто переходите к следующей странице
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@ title: "Установка boot9strap (Браузер)"
|
|||
#### Что понадобится
|
||||
|
||||
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
|
||||
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
|
||||
* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
|
||||
|
||||
|
|
@ -50,7 +50,7 @@ title: "Установка boot9strap (Браузер)"
|
|||
1. Нажимая (A) выберите следующие пункты:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
|
||||
+ If you get an error, just continue the next page
|
||||
+ Если появляется ошибка, просто переходите к следующей странице
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ title: "Установка boot9strap (Инъекция в игры DSiWare)"
|
|||
+ [`DSiWare_jpn_4swordshax_injection.zip`](magnet:?xt=urn:btih:1bcc90c93da91c9876671f6218084207def90db9&dn=DSiWare_jpn_4swordshax_injection.zip&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce)
|
||||
* Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
|
||||
* Свежая версия [b9sTool](https://github.com/Plailect/b9sTool/releases/latest)
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
|
||||
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
|
||||
* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
|
||||
* 11.4.0 `.firm` соответствующий **целевой 3DS**
|
||||
|
|
@ -165,7 +165,7 @@ title: "Установка boot9strap (Инъекция в игры DSiWare)"
|
|||
1. Нажимая (A) выберите следующие пункты:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
|
||||
+ If you get an error, just continue the next page
|
||||
+ Если появляется ошибка, просто переходите к следующей странице
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ title: "Установка boot9strap (Инъекция в сохранения
|
|||
* Свежая версия [3ds_dsiwarehax_installer](https://github.com/yellows8/3ds_dsiwarehax_installer/releases)
|
||||
* Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
|
||||
* Свежая версия [b9sTool](https://github.com/Plailect/b9sTool/releases/latest)
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
|
||||
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
|
||||
* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
|
||||
* 11.4.0 `.firm` соответствующий **целевой 3DS**
|
||||
|
|
@ -181,7 +181,7 @@ title: "Установка boot9strap (Инъекция в сохранения
|
|||
1. Нажимая (A) выберите следующие пункты:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
|
||||
+ If you get an error, just continue the next page
|
||||
+ Если появляется ошибка, просто переходите к следующей странице
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
title: "Установка boot9strap (Hardmod)"
|
||||
---
|
||||
|
||||
Отличное руководство по пайке хардмода находится [здесь](https://gbatemp.net/threads/414498/) (англ.). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) and [this](https://github.com/Plailect/Guide/issues/1185) before hardmodding.
|
||||
Отличное руководство по пайке хардмода находится [здесь](https://gbatemp.net/threads/414498/) (англ.). Если у вас New 3DS, прочтите [это](https://github.com/Plailect/Guide/issues/681) и [это](https://github.com/Plailect/Guide/issues/1185) перед тем, как начать.
|
||||
{: .notice--info}
|
||||
|
||||
Это рабочая реализация "FIRM partitions known-plaintext"-эксплойта. Подробнее о нем [здесь](https://www.3dbrew.org/wiki/3DS_System_Flaws) (англ.).
|
||||
|
|
@ -17,7 +17,7 @@ title: "Установка boot9strap (Hardmod)"
|
|||
#### Что понадобится
|
||||
|
||||
* Полученный с помощью [хардмода](https://gbatemp.net/threads/414498/) (англ.) образ NAND
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
|
||||
* Свежая версия [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
|
||||
+ Пользователи Windows могут воспользоваться скомпилированным `.exe-файлом`, тогда как пользователям Mac и Linux нужно иметь в системе установленный [Python 3](https://www.python.org/downloads/) для запуска `.py-файлов`
|
||||
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
|
||||
|
|
@ -82,7 +82,7 @@ title: "Установка boot9strap (Hardmod)"
|
|||
1. Нажимая (A) выберите следующие пункты:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
|
||||
+ If you get an error, just continue the next page
|
||||
+ Если появляется ошибка, просто переходите к следующей странице
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@ title: "Установка boot9strap (Homebrew Launcher)"
|
|||
#### Что понадобится
|
||||
|
||||
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
|
||||
* Свежая версия [safehax](https://github.com/TiniVi/safehax/releases/latest)
|
||||
* Свежая версия [udsploit](https://github.com/smealum/udsploit/releases/latest)
|
||||
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
|
||||
|
|
@ -57,7 +57,7 @@ title: "Установка boot9strap (Homebrew Launcher)"
|
|||
1. Нажимая (A) выберите следующие пункты:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
|
||||
+ If you get an error, just continue the next page
|
||||
+ Если появляется ошибка, просто переходите к следующей странице
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@ title: "Установка boot9strap (MSET)"
|
|||
#### Что понадобится
|
||||
|
||||
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
|
||||
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
|
||||
* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
|
||||
* Любой флешкартридж для DS, работающий на вашей версии прошивки
|
||||
|
|
@ -51,7 +51,7 @@ title: "Установка boot9strap (MSET)"
|
|||
1. Нажимая (A) выберите следующие пункты:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
|
||||
+ If you get an error, just continue the next page
|
||||
+ Если появляется ошибка, просто переходите к следующей странице
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -1,23 +1,23 @@
|
|||
---
|
||||
title: "Installing boot9strap (ntrboothax)"
|
||||
title: "Установка boot9strap (ntrboothax)"
|
||||
---
|
||||
|
||||
This is a placeholder page for the upcoming "ntrboothax" exploit.
|
||||
На этой странице будет размещена инструкция для эксплойта "ntrboothax".
|
||||
{: .notice--primary}
|
||||
|
||||
{% capture notice-1 %}
|
||||
|
||||
The ntrboothax exploit will require the following:
|
||||
Для ntrboothax вам понадобится следующее:
|
||||
|
||||
+ A DS / DSi flashcart
|
||||
+ Exact flashcart compatibility will be added when this exploit is released
|
||||
+ A small magnet
|
||||
+ Note that this is only required on folding style 3DSs, not 2DSs
|
||||
+ This is because the exploit requires your device to enter sleep mode while still having access to the buttons
|
||||
+ The magnet should be able to trigger your device's sleep mode by holding it on or around the ABXY buttons
|
||||
+ *One* of the following methods of installing ntrboothax to your flashcart:
|
||||
+ A [Powersaves](https://amzn.to/2fb3VY7)
|
||||
+ Another 3DS or 2DS already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
|
||||
+ DS / DSi флешкартридж
|
||||
+ Точная информация о совместимых флешкартриджах будет добавлена после релиза эксплойта
|
||||
+ Небольшой магнит
|
||||
+ Заметьте, что это необходимо только для 3DS складной конструкции, не для 2DS
|
||||
+ Это необходимо, потому что эксплойт требует ввести консоль в режим сна, сохранив при этом доступ к кнопкам
|
||||
+ Магнит должен вводить вашу консоль в режим сна, если приложить его к кнопкам ABXY или рядом с ними
|
||||
+ *Один* из следующих методов установки ntrboothax на флешкартридж:
|
||||
+ [Powersaves](https://amzn.to/2fb3VY7)
|
||||
+ Другая 3DS или 2DS с установленной кастомной прошивкой (например boot9strap или arm9loaderhax)
|
||||
|
||||
{% endcapture %}
|
||||
|
||||
|
|
|
|||
|
|
@ -41,12 +41,12 @@ sitemap: false
|
|||
+ [Установка boot9strap (Hardmod)](installing-boot9strap-(hardmod))
|
||||
+ [Установка boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher))
|
||||
+ [Установка boot9strap (MSET)](installing-boot9strap-(mset))
|
||||
+ [Installing boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
|
||||
+ [Установка boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax))
|
||||
+ [Перенос EmuNAND](move-emunand)
|
||||
+ [NTR и Cubic Ninja](ntr-and-cubic-ninja)
|
||||
+ [Смена региона](region-changing)
|
||||
+ [Проблемы и их решения](troubleshooting)
|
||||
+ [Updating B9S](updating-b9s)
|
||||
+ [Обновление B9S](updating-b9s)
|
||||
+ [Зачем реклама?](why-ads)
|
||||
{% endcapture %}
|
||||
<div class="notice--primary">{{ notice-2 | markdownify }}</div>
|
||||
|
|
@ -144,9 +144,10 @@ title: "Проблемы и их решения"
|
|||
1. Если вы понижали прошивку через Gateway, то убедитесь, что у вас установлена самая последняя версия Luma3DS (не ниже 6.2.3)
|
||||
1. Если версия вашего NAND между 3.0.0 и 4.5.0, проделайте следующие действия:
|
||||
+ Убедитесь, что используете самую свежую версию Luma 3DS (6.6, или выше)
|
||||
+ Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) и переименуйте его в `firmware.bin`
|
||||
+ Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) и переименуйте его в `native.firm`
|
||||
+ Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Скопируйте `firmware.bin` и `cetk` в папку `/luma/` на SD-карте
|
||||
+ Скопируйте `native.firm` и `cetk` в папку `/luma/` на SD-карте
|
||||
+ Если у вас Luma3DS версии 7.1 или ниже, переименуйте `native.firm` в `firmware.bin`
|
||||
+ После обновления прошивки удалите оба этих файла
|
||||
1. Попробуйте выполнить [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Обратитесь за помощью в [Nintendo Homebrew on Discord (англ.)](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@ title: "Обновление B9S"
|
|||
|
||||
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
|
||||
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
|
||||
* Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
|
||||
* Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
|
||||
|
||||
|
|
@ -41,7 +41,7 @@ title: "Обновление B9S"
|
|||
|
||||
1. Выключите консоль
|
||||
1. Вставьте SD-карту в компьютер
|
||||
1. **Leave the old (v7.1) version of Luma3DS (`boot.firm`) as it is. You will update this later.**
|
||||
1. **Оставьте старую (v7.1) версию Luma3DS (`boot.firm`) без изменений. Вы сможете обновить ее позже.**
|
||||
1. Скопируйте `boot.3dsx` в корень SD-карты
|
||||
1. Создайте папку `boot9strap` в корне SD-карты
|
||||
1. Скопируйте `GodMode9.firm` из `.zip-архива` GodMode9 в папку `/luma/payloads/` на SD-карте
|
||||
|
|
@ -74,7 +74,7 @@ title: "Обновление B9S"
|
|||
+ **"Show NAND or user string in System Settings"**
|
||||
1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
|
||||
|
||||
##### Section V - CTRNAND Luma3DS
|
||||
##### Часть V - CTRNAND Luma3DS
|
||||
|
||||
1. Перезагрузитесь, удерживая кнопку (Start), чтобы запустить меню Luma3DS chainloader
|
||||
1. Запустите GodMode9, нажав кнопку (A)
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+Bunu indirin [bu dosyayı](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ve `firmware.bin` olarak yeniden adlandırın
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Bunu indirin [bu dosyayı](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ `firmware.bin` ve` cetk` dosyalarını SD kartınızdaki `/ luma /` klasörüne kopyalayın
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. SD kartınızı cihazınıza tekrar takın
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Bu bir hata verirse, DNS ayarlarınızı "otomatik" olarak belirleyin
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Tarayıcı tabanlı açıklar (browserhax veya 2xrsa gibi) çoğu zaman dengesiz
|
|||
1. Daha önce Gateway kullanarak sürüm düşürdüyseniz en son sürüm Luma3DS kullandığınıza emin olun(v6.2.3 veya daha üstü)
|
||||
1. NAND versiyonunuz 3.0.0 ve 4.5.0 arasındaysa şunları yapın:
|
||||
+ En son Luma3DS sürümünü kullanmakta olduğunuzdan emin olun (v6.6 veya üstü, en az)
|
||||
+Bunu indirin [bu dosyayı](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ve `firmware.bin` olarak yeniden adlandırın
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Bunu indirin [bu dosyayı](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ `firmware.bin` ve` cetk` dosyalarını SD kartınızdaki `/ luma /` klasörüne kopyalayın
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ During this process, we also setup programs such as the following:
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -82,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least)
|
||||
1. If your NAND is of a version between 3.0.0 and 4.5.0, do the following:
|
||||
+ Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least)
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -62,10 +62,9 @@ In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/)
|
|||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+下载[这个文件](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)并重命名为`firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ 下载[这个文件](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ 复制`firmware.bin`和`cetk`到SD卡的`/luma/`文件夹下
|
||||
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
|
@ -83,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
如果这一步出错，则将DNS设置改为”auto”（自动）
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `firmware.bin` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -144,10 +144,10 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
|
|||
1. 如果你以前用Gateway降过级，确保你使用的是最新版的Luma3DS（版本号在v6.2.3及以上）
|
||||
1. 如果你的系统版本在3.0.0到4.5.0之间，进行如下操作：
|
||||
+ 确保你使用的是最新版的Luma3DS（版本号在v6.6及以上）
|
||||
+下载[这个文件](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)并重命名为`firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ 下载[这个文件](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ 复制`firmware.bin`和`cetk`到SD卡的`/luma/`文件夹下
|
||||
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ Delete both of these files after updating your device
|
||||
1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
|
||||
|
|
|
|||
|
|
@ -24,23 +24,23 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
|
|||
|
||||
<div class="notice--danger">{{ notice-1 | markdownify }}</div>
|
||||
|
||||
#### 你需要
|
||||
#### What you need
|
||||
|
||||
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
|
||||
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
||||
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
||||
* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
|
||||
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
|
||||
* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
|
||||
|
||||
#### 操作指南
|
||||
#### Instructions
|
||||
|
||||
##### 第一部分 - 准备工作
|
||||
##### Section I - Prep Work
|
||||
|
||||
For all steps in this section, overwrite any existing files on your SD card.
|
||||
{: .notice--info}
|
||||
|
||||
1. Power off your device
|
||||
1. 将你的 SD 卡插入到您的计算机
|
||||
1. Insert your SD card into your computer
|
||||
1. **Leave the old (v7.1) version of Luma3DS (`boot.firm`) as it is. You will update this later.**
|
||||
1. Copy `boot.3dsx` to the root of your SD card
|
||||
1. Create a folder named `boot9strap` on the root of your SD card
|
||||
|
|
@ -49,7 +49,7 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
##### 第二部分 - 安装 boot9strap
|
||||
##### Section II - Installing boot9strap
|
||||
|
||||
1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
|
||||
1. Launch SafeB9SInstaller by pressing (A)
|
||||
|
|
@ -61,7 +61,7 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
|
||||
##### Section III - Updating Luma3DS
|
||||
|
||||
1. 将你的 SD 卡插入到您的计算机
|
||||
1. Insert your SD card into your computer
|
||||
1. Delete the existing `boot.firm` from the root of your SD card
|
||||
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
|
||||
1. Reinsert your SD card into your device
|
||||
|
|
@ -80,7 +80,7 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `luma` -> `payloads`
|
||||
1. Press (X) on `SafeB9SInstaller.firm` to delete it
|
||||
1. 按 (A) 确认
|
||||
1. Press (A) to confirm
|
||||
1. Press (B) to return to `[0:] SDCARD`
|
||||
1. Press (Y) on `boot.firm` to copy it
|
||||
1. Press (B) to return to the main menu
|
||||
|
|
@ -90,7 +90,7 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
|
||||
1. Press (X) on `arm9loaderhax.bin` to delete it
|
||||
+ If you do not have this file, just proceed with the instructions
|
||||
1. 按 (A) 确认
|
||||
1. Press (A) to confirm
|
||||
1. Press (B) to return to the main menu
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (Y) on the `luma` folder to copy it
|
||||
|
|
@ -99,7 +99,7 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
|
||||
1. Press (X) on the existing `luma` folder to delete it
|
||||
+ If you do not have this folder, just proceed with the instructions
|
||||
1. 按 (A) 确认
|
||||
1. Press (A) to confirm
|
||||
1. Press (Y) to paste a copy of the `luma` folder from your SD card
|
||||
+ If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
|
||||
1. Press (Start) to reboot
|
||||
|
|
|
|||
|
|
@ -62,9 +62,9 @@ title: "完成安裝"
|
|||
+ 複製 `boot.firm` 到 SD 卡的根目錄底下*（覆蓋所有檔案）*
|
||||
+ 在稍後您更新您的主機後，請將 `boot.firm` 以[最新版的 Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) 替換
|
||||
1. 如果您的系統版本是在 3.0.0 到 4.5.0（含）之間，您必須同時手動下載下列韌體，否則無法開機：
|
||||
+ 下載[此檔案](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)並將它重新命名為`firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ 下載[此檔案](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ 複製 `firmware.bin` 及 `cetk` 檔案到 SD 卡上的 `/luma/` 資料夾
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ 在教學之後提到更新主機時，請刪除這兩個文件
|
||||
1. 將 SD 卡插回主機中
|
||||
1. 啟動您的主機
|
||||
|
|
@ -82,7 +82,7 @@ title: "完成安裝"
|
|||
+ 如果過程中出現錯誤，試試到 DNS 設定底下將設定改成「自動 （auto）」
|
||||
+ 如果錯誤持續，且您 NAND 的系統版本為 9.2.0 以下，請進行[版本 9.2.0 的 CTRTransfer](9.2.0-ctrtransfer)，並再試一次
|
||||
1. 如果您的主機在更新前為低於 9.0.0 的系統版本，請將您 SD 卡中的 `boot.firm` 檔案以[最新版的 Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) 替換
|
||||
1. 如果您主機先前為介於 3.0.0 至 4.5.0 的系統版本之間，請將 `firmware.bin` 以及 `cetk` 於 SD 卡中的 `/luma/` 資料夾刪除
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### 第三節 — 啟動 FBI 管理器
|
||||
|
||||
|
|
|
|||
|
|
@ -144,9 +144,10 @@ title: "疑難排解"
|
|||
1. 如果您之前有透過 Gateway 進行降級，請確保您使用的是最新版的 Luma3DS （v6.2.3 以上）
|
||||
1. 如果您 NAND 的系統版本是在 3.0.0 到 4.5.0 之間，請進行下列操作：
|
||||
+ 請先確保您 Luma3DS 是最新版本的（至少 v6.6 版）
|
||||
+ 下載[此檔案](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)並將它重新命名為`firmware.bin`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ 下載[此檔案](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ 複製 `firmware.bin` 及 `cetk` 檔案到 SD 卡上的 `/luma/` 資料夾
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ If you have Luma3DS version 7.1 or lower, rename `native.firm` to `firmware.bin`
|
||||
+ 在更新完您的主機後，刪除這兩個檔案
|
||||
1. 試試看進行[9.2.0 CTRTransfer](9.2.0-ctrtransfer)
|
||||
1. 請於 [Discord 的 Nintendo Homebrew 伺服器](https://discord.gg/MWxPgEp)尋求。
|
||||
|
|
|
|||
Loading…
Reference in a new issue