diff --git a/_pages/ar_SA/installing-boot9strap-(fredtool).txt b/_pages/ar_SA/installing-boot9strap-(fredtool).txt
index 51eeec8132..610dc0992b 100644
--- a/_pages/ar_SA/installing-boot9strap-(fredtool).txt
+++ b/_pages/ar_SA/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/bg_BG/installing-boot9strap-(fredtool).txt b/_pages/bg_BG/installing-boot9strap-(fredtool).txt
index 51eeec8132..610dc0992b 100644
--- a/_pages/bg_BG/installing-boot9strap-(fredtool).txt
+++ b/_pages/bg_BG/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/ca_ES/installing-boot9strap-(fredtool).txt b/_pages/ca_ES/installing-boot9strap-(fredtool).txt
index 51eeec8132..610dc0992b 100644
--- a/_pages/ca_ES/installing-boot9strap-(fredtool).txt
+++ b/_pages/ca_ES/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt
index 51eeec8132..610dc0992b 100644
--- a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/de_DE/installing-boot9strap-(fredtool).txt b/_pages/de_DE/installing-boot9strap-(fredtool).txt
index 37e19c9112..2898e5158e 100644
--- a/_pages/de_DE/installing-boot9strap-(fredtool).txt
+++ b/_pages/de_DE/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Stecke deine SD-Karte nun wieder in deinen 3DS
+1. Schalte deine Konsole an
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Schalte deine Konsole an
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + Wenn du diesen Schritt vergessen hast, kehrt das System zum Home-Menü zurück, anstatt boot9strap zu installieren. Du musst dann die Systemeinstellungen erneut öffnen und von Abschnitt III Schritt 7 nochmals anfangen
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst
diff --git a/_pages/el_GR/installing-boot9strap-(fredtool).txt b/_pages/el_GR/installing-boot9strap-(fredtool).txt
index 369d6a2745..afec15105b 100644
--- a/_pages/el_GR/installing-boot9strap-(fredtool).txt
+++ b/_pages/el_GR/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/en_PT/installing-boot9strap-(fredtool).txt b/_pages/en_PT/installing-boot9strap-(fredtool).txt
index f10375c21d..8b40b022d4 100644
--- a/_pages/en_PT/installing-boot9strap-(fredtool).txt
+++ b/_pages/en_PT/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert ye SD card into ye device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/es_ES/installing-boot9strap-(fredtool).txt b/_pages/es_ES/installing-boot9strap-(fredtool).txt
index 097cf3988c..8654960aad 100644
--- a/_pages/es_ES/installing-boot9strap-(fredtool).txt
+++ b/_pages/es_ES/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
 1. Copia `boot.nds` (B9STool) a la raíz de tu tarjeta SD
 1. Copia la carpeta `private` contenida en el `.zip` de Frogminer_save a la raíz de tu tarjeta SD
+1. Vuelve a insertar tu tarjeta SD en tu consola
+1. Enciende tu consola
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Enciende tu consola
 1. Entra a Configuración de la consola
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Toca el cuarto cuadrado con una letra "A" en él
 1. Si el exploit fue exitoso, tu consola habrá cargado b9sTool
 1. Usando el D-Pad, selecciona "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Presiona (A), luego presiona START y SELECT al mismo tiempo para iniciar el proceso
 1. Una vez completado y con la pantalla inferior diciendo "done.", sal de b9sTool, y luego apaga tu consola
   + Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
diff --git a/_pages/fi_FI/installing-boot9strap-(fredtool).txt b/_pages/fi_FI/installing-boot9strap-(fredtool).txt
index 78a6fc5e1b..fb11a39bae 100644
--- a/_pages/fi_FI/installing-boot9strap-(fredtool).txt
+++ b/_pages/fi_FI/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Aseta SD-korttisi takaisin konsoliisi
+1. Käynnistä konsolisi
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Käynnistä konsolisi
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + Voit joutua pakottamaan konsolin sammuksiin pitämällä virtapainiketta pohjassa
diff --git a/_pages/fr_FR/installing-boot9strap-(fredtool).txt b/_pages/fr_FR/installing-boot9strap-(fredtool).txt
index e0355a6d01..6ed18a88a5 100644
--- a/_pages/fr_FR/installing-boot9strap-(fredtool).txt
+++ b/_pages/fr_FR/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier
 1. Copiez le fichier `boot.nds`(B9STool) vers la racine de votre carte SD
 1. Copiez le dossier `private` du fichier `.zip` de Frogminer_save vers la racine de votre carte SD
+1. Réinsérez votre carte SD dans votre 3DS
+1. Allumez votre console
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Allumez votre console
 1. Lancez les Paramètres de la console
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Touchez la quatrième case contenant la lettre "A"
 1. Si l'exploit a réussi, votre console devrait avoir démarré b9sTool
 1. Séléctionnez "Install boot9strap" en utilisant la croix directionnelle
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Appuyez sur (A), puis appuyez sur START et SELECT en même temps pour démarrer le processus
 1. Une fois que le processus est terminé et que vous voyez le message "done." s'afficher sur l'écran du bas, quittez b9sTool, puis éteignez votre console
   + Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé
diff --git a/_pages/he_IL/installing-boot9strap-(fredtool).txt b/_pages/he_IL/installing-boot9strap-(fredtool).txt
index 0276a37f3a..e083e4fbd9 100644
--- a/_pages/he_IL/installing-boot9strap-(fredtool).txt
+++ b/_pages/he_IL/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
+1. תפעילו את המכשיר
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. תפעילו את המכשיר
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה
diff --git a/_pages/hr_HR/installing-boot9strap-(fredtool).txt b/_pages/hr_HR/installing-boot9strap-(fredtool).txt
index 51eeec8132..610dc0992b 100644
--- a/_pages/hr_HR/installing-boot9strap-(fredtool).txt
+++ b/_pages/hr_HR/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/hu_HU/installing-boot9strap-(fredtool).txt b/_pages/hu_HU/installing-boot9strap-(fredtool).txt
index 8055af933d..7f1506a7c3 100644
--- a/_pages/hu_HU/installing-boot9strap-(fredtool).txt
+++ b/_pages/hu_HU/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ Ebben a fejezetben fel fogod másolni azokat a fájlokat, amik átmenetileg lecs
   + Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
 1. Másold a `boot.nds` (B9STool) fájlt az SD kártyád gyökerébe
 1. Másold át a `private` mappát a Frogminer_save `.zip`-ből az SD kártyád gyökerébe
+1. Tedd vissza az SD kártyád a készülékedbe
+1. Kapcsold be a készülékedet
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ Ebben a fejezetben fel fogod másolni azokat a fájlokat, amik átmenetileg lecs
 
 Ebben a fejezetben másolni fogod a hackelt DS Connection Settings DSiWare-t a belső memóriába, ami átmenetileg lecseréli azt a Flipnote Studio-val.
 
-1. Kapcsold be a készülékedet
 1. Lépj be a System Settings-be a készülékeden
 1. Navigálj ide: `Data Management` -> `DSiWare` -> `SD Card` ([kép](/images/screenshots/bb3/dsiware-management.png))
 1. Válaszd a "Haxxxxxxxxx!" címet
@@ -107,7 +108,7 @@ Ebben a fejezetben végrehajtasz egy specifikus lépés sorozatot a Flipnote Stu
 1. Nyomd meg a negyedik dobozt benne az "A" betűvel
 1. Ha az exploit sikeres volt, a készülékedek ezt követően be kell töltenie a b9sTool-t
 1. A D-Pad-dal menj az "Install boot9strap" opcióra
-  + Ha kihagytad ezt a lépést a rendszer a HOME Menübe kerülsz a boot9strap telepítése helyett, ekkor meg kell nyitnod a "System Settings-et, majd elölről kell kezdened a 7. lépéstől a III. részben
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Nyomj (A)-t majd ezt követően START-ot és SELECT-et egyszerre a folyamat elkezdéséhez
 1. Ha végzett és az alsó képernyő azt mondja "done." lépj ki a b9sTool-ból, majd kapcsold ki eszközöd
   + Elképzelhető, hogy kényszerítened kell a leállást a bekapcsológomb lenyomva tartásával
diff --git a/_pages/id_ID/installing-boot9strap-(fredtool).txt b/_pages/id_ID/installing-boot9strap-(fredtool).txt
index 51eeec8132..610dc0992b 100644
--- a/_pages/id_ID/installing-boot9strap-(fredtool).txt
+++ b/_pages/id_ID/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/it_IT/installing-boot9strap-(fredtool).txt b/_pages/it_IT/installing-boot9strap-(fredtool).txt
index 04a66f7f62..b9dbaa1d1b 100644
--- a/_pages/it_IT/installing-boot9strap-(fredtool).txt
+++ b/_pages/it_IT/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In questa sezione copierai i file necessari per sostituire temporaneamente "Impo
   + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
 1. Copia il file `boot.nds` (B9STool) nella directory principale della tua scheda SD
 1. Copia la cartella `private` presente nell'archivio `.zip` di Frogminer_save nella directory principale della tua scheda SD
+1. Reinserisci la scheda SD nella tua console
+1. Accendi la console
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In questa sezione copierai i file necessari per sostituire temporaneamente "Impo
 
 In questa sezione copierai il DSiWare modificato "Impostazioni di collegamento DS" nella memoria interna, che verrà così temporaneamente sostituito da Flipnote Studio.
 
-1. Accendi la console
 1. Avvia "Impostazioni della console"
 1. Entra in `Gestione dati` -> `DSiWare` -> `Scheda SD` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Seleziona "Haxxxxxxxxx!"
@@ -107,7 +108,7 @@ In questa sezione eseguirai una serie di passaggi molto specifici all'interno di
 1. Seleziona il quarto riquadro con la lettera "A" all'interno
 1. Se l'exploit ha avuto successo, la tua console avrà caricato b9sTool
 1. Usando il D-Pad, vai su "Install boot9strap"
-  + Se salti questo passaggio, la console si riavvierà nel menu HOME senza aver installato boot9strap, e dovrai avviare "Impostazioni della console" per poi ricominciare dal passo 7 della Sezione III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Premi (A), quindi premi START e SELECT contemporaneamente per avviare il processo
 1. Al termine lo schermo inferiore presenterà la scritta "done.". Esci da b9sTool, quindi spegni la console
   + Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
diff --git a/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt b/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt
index e4056e9bce..949b676873 100644
--- a/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt
@@ -66,8 +66,8 @@ In questa sezione visiterai la pagina web dell'exploit del browser, che userà u
     + Se non riesci ad avviare la fotocamera, avvia il Browser Internet e raggiungi manualmente l'URL (`https://zoogie.github.io/web/nbhax/`)
 1. Tocca il pulsante Codice QR e scansiona [questo codice QR](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L)
   + Se ottieni un errore, [segui questa guida per risolvere il problema](troubleshooting#installing-boot9strap-ssloth-browser)
-  + If you get a security certificate warning, press (A) to allow the connection
-1. Tap the "PROCEED TO HAX" button
+  + Se visualizzi un avviso riguardo un certificato di sicurezza, premi (A) per consentire la connessione
+1. Tocca il pulsante "PROCEED TO HAX"
 1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller
 
 #### Sezione IV - Installazione di boot9strap
diff --git a/_pages/it_IT/troubleshooting.txt b/_pages/it_IT/troubleshooting.txt
index 176f08b20f..934538363b 100644
--- a/_pages/it_IT/troubleshooting.txt
+++ b/_pages/it_IT/troubleshooting.txt
@@ -122,11 +122,11 @@ Probabilmente significa che hai già un custom firmware. Dovresti [verificare la
 
 ### "Si è verificato un errore. Tieni premuto il pulsante POWER per spegnere la console..." (schermo nero con testo)
 
-The file `arm11code.bin` is missing or misplaced. Download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), place `otherapp.bin` on the root of your SD card and rename it to `arm11code.bin`. Non aggiungere l'estensione `.bin` se non la vedi presente.
+Il file `arm11code.bin` è mancante o mal posizionato. Scarica l'ultima versione di [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), posiziona il file `otherapp.bin` nella directory principale della tua scheda SD` e rinominalo in `arm11code.bin`. Non aggiungere l'estensione `.bin` se non la vedi presente.
 
 ### "Si è verificato un errore che ha provocato la chiusura del software..." (messaggio su riquadro bianco)
 
-There is an issue with your `arm11code.bin` file. Download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), place `otherapp.bin` on the root of your SD card and rename it to `arm11code.bin`. Non aggiungere l'estensione `.bin` se non la vedi presente.
+C'è un problema con il tuo file `arm11code.bin`. Scarica l'ultima versione di [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), posiziona il file `otherapp.bin` nella directory principale della tua scheda SD` e rinominalo in `arm11code.bin`. Non aggiungere l'estensione `.bin` se non la vedi presente.
 
 ### Crash all'apertura di browserhax via codice QR o via URL
 
diff --git a/_pages/ja_JP/installing-boot9strap-(fredtool).txt b/_pages/ja_JP/installing-boot9strap-(fredtool).txt
index f15cf5ff56..bf0ee5ac1b 100644
--- a/_pages/ja_JP/installing-boot9strap-(fredtool).txt
+++ b/_pages/ja_JP/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + SDカードのルートとは、Nintendo 3DSのフォルダなどがある最初の項目のことであり、フォルダの中ではありません。
 1. SDカードのルートに`boot.nds` (B9STool) をコピーします
 1. Frogminer_save `.zip`から`private`フォルダをSDカードのルートにコピーします
+1. 再度、SDカードを本体に挿入してください。
+1. デバイスの電源を入れます
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. デバイスの電源を入れます
 1. 「本体設定」を開きます。
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. 「A」の文字が入った4番目のボックスをタップしてください
 1. エクスプロイトが成功した場合、お使いのデバイスは b9sTool をロードします。
 1. 方向ボタンを使って「boot9strapのインストール(Install boot9strap)」に移動します
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. (A) を押し、同時にSTARTとSELECTを押してプロセスを開始します
 1. 完了し、下の画面に「完了(done)」と表示されたら、b9sToolを終了し、デバイスの電源を切ってください
   + 電源ボタンを長押しして強制的に電源を切る必要があるかもしれません
diff --git a/_pages/ko_KR/installing-boot9strap-(fredtool).txt b/_pages/ko_KR/installing-boot9strap-(fredtool).txt
index 91b3ff8e46..d8de9cf407 100644
--- a/_pages/ko_KR/installing-boot9strap-(fredtool).txt
+++ b/_pages/ko_KR/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ title: "boot9strap 설치 (Fredtool)"
   + SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 않 들어가 있는 상태의 폴더 입니다
 1. 'boot.nds' (B9STool) 파일을 SD 카드의 루트에 복사해 주세요
 1. SD 카드의 루트로 Frogminer_save `.zip`안에 압축이 되있는 `private` 폴더를 복사해 주세요
+1. SD 카드를 기기에 다시 삽입해 주세요
+1. 기기를 시작해 주세요
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ title: "boot9strap 설치 (Fredtool)"
 
 이 섹션에서는, 해킹된 DS 소프트웨어용 설정 DSiWare를 내부 메모리로 복사하여, 이 앱을 잠시 동안 Flipnote Studio으로 변경합니다
 
-1. 기기를 시작해 주세요
 1. 기기에서 본체 설정을 열어 주세요
 1. `데이터 관리` -> `DSiWare` -> `SD 카드`로 들어가주세요 ([사진](/images/screenshots/bb3/dsiware-management.png))
 1. "Haxxxxxxxxx!" 타이틀을 선택해 주세요
@@ -107,7 +108,7 @@ title: "boot9strap 설치 (Fredtool)"
 1. "A"가 들어가 있는 네 번째 버튼을 눌러 주세요
 1. 익스플로잇이 성공적이었다면 b9sTool을 실행했을 것입니다
 1. 십자 패드를 사용해서, "Install boot9strap"으로 이동해 주세요.
-  + 이 스텝을 놓쳤다면, 시스템은 boot9strap을 설치하는 대신 HOME 메뉴로 나갈 것이고, 다시 DS 소프트웨어용 설정을 열어서 섹션 III의 7번 단계부터 시작해야 할 것입니다
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. (A) 버튼을 누른 후, START와 SELECT를 동시에 눌러 작업을 실행해 주세요
 1. 완료되고 아래 화면에 "done."이라고 표시되면, b9sTool를 종료하고 기기의 전원을 꺼 주세요
   + 전원버튼을 계속 눌러 강제종료를 해야 할 수도 있습니다
diff --git a/_pages/ms_MY/installing-boot9strap-(fredtool).txt b/_pages/ms_MY/installing-boot9strap-(fredtool).txt
index 0fa5227699..59e349b08d 100644
--- a/_pages/ms_MY/installing-boot9strap-(fredtool).txt
+++ b/_pages/ms_MY/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/nl_NL/installing-boot9strap-(fredtool).txt b/_pages/nl_NL/installing-boot9strap-(fredtool).txt
index 78ae94cf98..6048c72e0f 100644
--- a/_pages/nl_NL/installing-boot9strap-(fredtool).txt
+++ b/_pages/nl_NL/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
 1. Kopieer `boot.nds` (B9STool) naar de hoofdmap van je SD-kaart
 1. Kopieer de `private` map van de Frogminer_save `.zip` naar de hoofdmap van je SD-kaart
+1. Stop je SD kaart terug in je 3DS
+1. Zet je 3DS aan
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Zet je 3DS aan
 1. Open System Settings op je apparaat
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tik op het vierde vak met de letter "A" erin
 1. Als de exploit succesvol was, zal je 3DS b9sTool opstarten
 1. Met behulp van de D-Pad, navigeer naar "install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Druk op (A), druk dan op START en SELECT op het zelfde moment om het proces te starten
 1. Eenmaal voltooid en het onderste scherm "done" toont, sluit dan b9sTool en schakel je 3DS uit
   + Mogelijk moet je de power knop een tijdje inhouden om zo je console uit te zetten
diff --git a/_pages/no_NO/installing-boot9strap-(fredtool).txt b/_pages/no_NO/installing-boot9strap-(fredtool).txt
index 4b78f0a7e2..473881e749 100644
--- a/_pages/no_NO/installing-boot9strap-(fredtool).txt
+++ b/_pages/no_NO/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Sett inn SD-kortet i konsollen igjen
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/pl_PL/installing-boot9strap-(fredtool).txt b/_pages/pl_PL/installing-boot9strap-(fredtool).txt
index 8f2824f6cf..6a9f3a8441 100644
--- a/_pages/pl_PL/installing-boot9strap-(fredtool).txt
+++ b/_pages/pl_PL/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Skopiuj plik `boot.nds` (B9STool) do katalogu głównego karty SD
 1. Skopiuj folder `private` z katalogu Frogminer_save `.zip` do głównego katalogu Twojej karty SD
+1. Włóż ponownie kartę SD do konsoli
+1. Włącz konsolę
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Włącz konsolę
 1. Uruchom "System Settings" na twoim urządzeniu
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Wciśnij czwarty przycisk, na którym widnieje litera "A"
 1. Jeżeli exploit zadziałał poprawnie, na Twoim urządzeniu został załadowany b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + Możliwe, że będziesz musiał wymusić wyłączenie 3DS'a poprzez przytrzymanie przycisku zasilania
diff --git a/_pages/pt_BR/installing-boot9strap-(fredtool).txt b/_pages/pt_BR/installing-boot9strap-(fredtool).txt
index f3112d76ed..9d53cbad14 100644
--- a/_pages/pt_BR/installing-boot9strap-(fredtool).txt
+++ b/_pages/pt_BR/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ Nesta seção, você copiará os arquivos necessários para substituir temporari
   + A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
 1. Copie `boot.nds` (B9STool) para a raiz o seu cartão SD
 1. Copie a pasta `private` do `.zip` do Frogminer_save para a raiz do seu cartão SD
+1. Reinsira seu cartão SD no seu dispositivo
+1. Ligue o seu dispositivo
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ Nesta seção, você copiará os arquivos necessários para substituir temporari
 
 Nesta seção, você irá copiar as Configurações de DS do DSiWare para a memória interna, que irá substituí-la temporariamente pelo Flipnote Studio.
 
-1. Ligue o seu dispositivo
 1. Abra a Configuração do Console em seu dispositivo
 1. Navegue para `Gerenciamento de Dados` -> `DSiWare` -> `Cartão SD` ([imagem](/images/screenshots/bb3/dsiware-management.png))
 1. Selecione o aplicativo "Haxxxxxxx!"
@@ -107,7 +108,7 @@ Nesta seção, você executará uma série de passos muito específicos dentro d
 1. Toque na quarta caixa com a letra "A" nela
 1. Se o exploit for bem sucedido, seu dispositivo irá abrir o b9sTool
 1. Usando os botões direcionais, mova para "Install boot9strap"
-  + Se você perder esta etapa, o sistema vai sair para o Menu HOME ao invés de instalar o boot9strap e você precisará abrir as Configurações do Sistema, e começar novamente a partir da Etapa 7 da Seção III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Pressione (A), depois pressione START e SELECT ao mesmo tempo para iniciar o processo
 1. Quando for concluído e a tela inferior dizer "done", saia do b9sTool, então desligue o seu dispositivo
   + Você pode ter que forçar o desligamento segurando o botão power
diff --git a/_pages/pt_PT/installing-boot9strap-(fredtool).txt b/_pages/pt_PT/installing-boot9strap-(fredtool).txt
index 51eeec8132..610dc0992b 100644
--- a/_pages/pt_PT/installing-boot9strap-(fredtool).txt
+++ b/_pages/pt_PT/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/ro_RO/installing-boot9strap-(fredtool).txt b/_pages/ro_RO/installing-boot9strap-(fredtool).txt
index 9d2b1d77f4..f1bd9b9eaf 100644
--- a/_pages/ro_RO/installing-boot9strap-(fredtool).txt
+++ b/_pages/ro_RO/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copiați `boot.nds` (B9STool) în rădăcina cardului SD
 1. Copiați folderul `private` de pe arhiva Frogminer_save `.zip` în rădăcina cardului SD
+1. Reintroduceți cardul SD în dispozitivul dumneavoastră
+1. Porniți dispozitivul
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Porniți dispozitivul
 1. Porniți System Settings pe consolă
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Atingeţi căsuța a patra cu litera "A" în ea
 1. În cazul în care exploit-ul a mers, dispozitivul va încărca b9sTool
 1. Folosind D-Padul, selectați "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Apăsați (A), apoi apăsați START și SELECT în același timp pentru a începe procedeul
 1. Odată completat și cu ecranul inferior zicând "done.", ieșiți din b9sTool, apoi închideți dispozitivul
   + Este posibil să aveţi nevoie să forțați oprirea dispozitivului apăsând butonul de pornire
diff --git a/_pages/ru_RU/installing-boot9strap-(fredtool).txt b/_pages/ru_RU/installing-boot9strap-(fredtool).txt
index b818ac9bc2..858d753b47 100644
--- a/_pages/ru_RU/installing-boot9strap-(fredtool).txt
+++ b/_pages/ru_RU/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Скопируйте `boot.nds` (B9STool) в корень SD-карты
 1. Скопируйте папку `private` из `.zip-архива` Frogminer_save в корень SD-карты
+1. Вставьте SD-карту обратно в консоль
+1. Включите консоль
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Включите консоль
 1. Откройте Системные настройки на вашей консоли
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Нажмите на четвертый значок с буквой "A"
 1. Если эксплойт сработал корректно, запустится b9sTool
 1. Используя крестовину, выберите "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Нажмите (A), затем нажмите START и SELECT одновременно, чтобы начать процесс
 1. После завершения процесса и появления на нижнем экране надписи "done.", выйдите из b9sTool, затем выключите консоль
   + При необходимости выключите консоль принудительно, удерживая кнопку питания
diff --git a/_pages/sv_SE/installing-boot9strap-(fredtool).txt b/_pages/sv_SE/installing-boot9strap-(fredtool).txt
index af9c23a736..aceb926e26 100644
--- a/_pages/sv_SE/installing-boot9strap-(fredtool).txt
+++ b/_pages/sv_SE/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Sätt tillbaka ditt SD-kort i din enhet
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/th_TH/installing-boot9strap-(fredtool).txt b/_pages/th_TH/installing-boot9strap-(fredtool).txt
index 51eeec8132..610dc0992b 100644
--- a/_pages/th_TH/installing-boot9strap-(fredtool).txt
+++ b/_pages/th_TH/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/tr_TR/installing-boot9strap-(fredtool).txt b/_pages/tr_TR/installing-boot9strap-(fredtool).txt
index 141860a2f3..cc9ea5ae4c 100644
--- a/_pages/tr_TR/installing-boot9strap-(fredtool).txt
+++ b/_pages/tr_TR/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. SD kartınızı cihazınıza tekrar takın
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/uk_UA/installing-boot9strap-(fredtool).txt b/_pages/uk_UA/installing-boot9strap-(fredtool).txt
index 51eeec8132..610dc0992b 100644
--- a/_pages/uk_UA/installing-boot9strap-(fredtool).txt
+++ b/_pages/uk_UA/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/vi_VN/installing-boot9strap-(fredtool).txt b/_pages/vi_VN/installing-boot9strap-(fredtool).txt
index 51eeec8132..610dc0992b 100644
--- a/_pages/vi_VN/installing-boot9strap-(fredtool).txt
+++ b/_pages/vi_VN/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 1. Copy `boot.nds` (B9STool) to the root of your SD card
 1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card
+1. Reinsert your SD card into your device
+1. Power on your device
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. Power on your device
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. Tap the fourth box with the letter "A" in it
 1. If the exploit was successful, your device will have loaded b9sTool
 1. Using the D-Pad, move to "Install boot9strap"
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. Press (A), then press START and SELECT at the same time to begin the process
 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
diff --git a/_pages/zh_CN/installing-boot9strap-(fredtool).txt b/_pages/zh_CN/installing-boot9strap-(fredtool).txt
index a21d068742..f8f6dced8d 100644
--- a/_pages/zh_CN/installing-boot9strap-(fredtool).txt
+++ b/_pages/zh_CN/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ title: "安装 boot9strap（通过 Fredtool）"
   + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
 1. 复制 `boot.nds` （B9STool）到你的 SD 卡根目录
 1. 从 Frogminer_save `.zip` 压缩包中复制 `private` 文件夹到内存卡的根目录
+1. 将 SD 卡重新插入你的主机
+1. 启动你的主机
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ title: "安装 boot9strap（通过 Fredtool）"
 
 本节中，你将把被修改过的 DS 连接设置应用程序复制进内部存储，这将临时替换其为 Flipnote Studio。
 
-1. 启动你的主机
 1. 启动你主机上的 “系统设置(System settings)”
 1. 依次点击 `数据管理（データ管理/Data Management）` -> `DSiWare 数据管理（DSiWareデータ管理/DSiWare）` -> `SD卡（micro SDカード/SDカード/SD/microSD）`（[例图](/images/screenshots/bb3/dsiware-management.png)）
 1. 选择 “Haxxxxxxxxx!”
@@ -107,7 +108,7 @@ title: "安装 boot9strap（通过 Fredtool）"
 1. 点击第四个带有 “A” 的框
 1. 如果漏洞成功执行，你的主机将会进入到 b9sTool
 1. 使用十字键将光标移动至“Install boot9starp”
-  + 如果你漏了这步，系统将重启到桌面而非安装 boot9strap，你需要重新打开系统设置，然后从本页教程第三步下的第7步开始
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. 按下 “A” 键，然后同时按下 START 键和 SELECT 键来开始安装
 1. 一旦下屏显示 “done.” ，那么安装就已经完成了。退出b9stool ，然后关机
   + 你可能需要长按电源键强制关机
diff --git a/_pages/zh_TW/installing-boot9strap-(fredtool).txt b/_pages/zh_TW/installing-boot9strap-(fredtool).txt
index 13d53cafdd..17a47287ac 100644
--- a/_pages/zh_TW/installing-boot9strap-(fredtool).txt
+++ b/_pages/zh_TW/installing-boot9strap-(fredtool).txt
@@ -71,6 +71,8 @@ In this section, you will copy the files necessary to temporarily replace DS Con
   + 「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
 1. 將 `boot.nds` (B9STool) 複製到 SD 卡根目錄中
 1. 解壓 Frogminer_save `.zip` 中的 `private` 資料夾到 SD 卡的根目錄底下
+1. 將 SD 卡插回主機中
+1. 啟動您的主機
 
     ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -79,7 +81,6 @@ In this section, you will copy the files necessary to temporarily replace DS Con
 
 In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
 
-1. 啟動您的主機
 1. 於您主機上啟動系統設定 (System Settings)
 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
 1. Select the "Haxxxxxxxxx!" title
@@ -107,7 +108,7 @@ In this section, you will perform a series of very specific steps within Flipnot
 1. 選擇第四項含有字母『A』的選項
 1. 如果漏洞成功執行，您的主機將自動載入 b9sTool
 1. 使用方向鍵移動至『Install boot9starp』
-  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section III
+  + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 7 of Section IV
 1. 按下『A』，然後同時按下 START 鍵和 SELECT 鍵
 1. 一旦下方螢幕提示『done.』，那麼就已經完成了，退出 b9stool 並關閉主機
   + 您可能得按住電源紐強制關機