diff --git a/_pages/ar_SA/a9lh-to-b9s.txt b/_pages/ar_SA/a9lh-to-b9s.txt index f222dc3e5a..f32f814a31 100644 --- a/_pages/ar_SA/a9lh-to-b9s.txt +++ b/_pages/ar_SA/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/ar_SA/bannerbomb3-fredtool-(twn).txt b/_pages/ar_SA/bannerbomb3-fredtool-(twn).txt index 983e132fe3..7457946013 100644 --- a/_pages/ar_SA/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ar_SA/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/ar_SA/faq.txt b/_pages/ar_SA/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/ar_SA/faq.txt +++ b/_pages/ar_SA/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ar_SA/home.txt b/_pages/ar_SA/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/ar_SA/home.txt +++ b/_pages/ar_SA/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/ar_SA/installing-boot9strap-(fredtool).txt b/_pages/ar_SA/installing-boot9strap-(fredtool).txt index 41fde96a62..9b389ee19f 100644 --- a/_pages/ar_SA/installing-boot9strap-(fredtool).txt +++ b/_pages/ar_SA/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/ar_SA/installing-boot9strap-(hardmod).txt b/_pages/ar_SA/installing-boot9strap-(hardmod).txt index 187273f1a1..4f0888d535 100644 --- a/_pages/ar_SA/installing-boot9strap-(hardmod).txt +++ b/_pages/ar_SA/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt b/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt b/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt index 370ed94c1b..b77ea450ab 100644 --- a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt +++ b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/ar_SA/installing-boot9strap-(soundhax).txt b/_pages/ar_SA/installing-boot9strap-(soundhax).txt index d9c13f9bc7..b94e84c610 100644 --- a/_pages/ar_SA/installing-boot9strap-(soundhax).txt +++ b/_pages/ar_SA/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/ar_SA/installing-boot9strap-(usm).txt b/_pages/ar_SA/installing-boot9strap-(usm).txt index c706e3641d..58be815045 100644 --- a/_pages/ar_SA/installing-boot9strap-(usm).txt +++ b/_pages/ar_SA/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/ar_SA/troubleshooting.txt b/_pages/ar_SA/troubleshooting.txt index 3cb548dda5..ca8c4d8017 100644 --- a/_pages/ar_SA/troubleshooting.txt +++ b/_pages/ar_SA/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/ar_SA/updating-b9s.txt b/_pages/ar_SA/updating-b9s.txt index f105ea0204..e08d20a2fd 100644 --- a/_pages/ar_SA/updating-b9s.txt +++ b/_pages/ar_SA/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/bg_BG/a9lh-to-b9s.txt b/_pages/bg_BG/a9lh-to-b9s.txt index f222dc3e5a..f32f814a31 100644 --- a/_pages/bg_BG/a9lh-to-b9s.txt +++ b/_pages/bg_BG/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/bg_BG/bannerbomb3-fredtool-(twn).txt b/_pages/bg_BG/bannerbomb3-fredtool-(twn).txt index 983e132fe3..7457946013 100644 --- a/_pages/bg_BG/bannerbomb3-fredtool-(twn).txt +++ b/_pages/bg_BG/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/bg_BG/faq.txt b/_pages/bg_BG/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/bg_BG/faq.txt +++ b/_pages/bg_BG/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/bg_BG/home.txt b/_pages/bg_BG/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/bg_BG/home.txt +++ b/_pages/bg_BG/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/bg_BG/installing-boot9strap-(fredtool).txt b/_pages/bg_BG/installing-boot9strap-(fredtool).txt index 41fde96a62..9b389ee19f 100644 --- a/_pages/bg_BG/installing-boot9strap-(fredtool).txt +++ b/_pages/bg_BG/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/bg_BG/installing-boot9strap-(hardmod).txt b/_pages/bg_BG/installing-boot9strap-(hardmod).txt index 187273f1a1..4f0888d535 100644 --- a/_pages/bg_BG/installing-boot9strap-(hardmod).txt +++ b/_pages/bg_BG/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/bg_BG/installing-boot9strap-(hbl-usm).txt b/_pages/bg_BG/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/bg_BG/installing-boot9strap-(hbl-usm).txt +++ b/_pages/bg_BG/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt b/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt +++ b/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/bg_BG/installing-boot9strap-(ntrboot).txt b/_pages/bg_BG/installing-boot9strap-(ntrboot).txt index 370ed94c1b..b77ea450ab 100644 --- a/_pages/bg_BG/installing-boot9strap-(ntrboot).txt +++ b/_pages/bg_BG/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/bg_BG/installing-boot9strap-(soundhax).txt b/_pages/bg_BG/installing-boot9strap-(soundhax).txt index d9c13f9bc7..b94e84c610 100644 --- a/_pages/bg_BG/installing-boot9strap-(soundhax).txt +++ b/_pages/bg_BG/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/bg_BG/installing-boot9strap-(usm).txt b/_pages/bg_BG/installing-boot9strap-(usm).txt index c706e3641d..58be815045 100644 --- a/_pages/bg_BG/installing-boot9strap-(usm).txt +++ b/_pages/bg_BG/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/bg_BG/troubleshooting.txt b/_pages/bg_BG/troubleshooting.txt index 3cb548dda5..ca8c4d8017 100644 --- a/_pages/bg_BG/troubleshooting.txt +++ b/_pages/bg_BG/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/bg_BG/updating-b9s.txt b/_pages/bg_BG/updating-b9s.txt index f105ea0204..e08d20a2fd 100644 --- a/_pages/bg_BG/updating-b9s.txt +++ b/_pages/bg_BG/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/ca_ES/a9lh-to-b9s.txt b/_pages/ca_ES/a9lh-to-b9s.txt index 56ba8d968c..19ad3adfd1 100644 --- a/_pages/ca_ES/a9lh-to-b9s.txt +++ b/_pages/ca_ES/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/ca_ES/bannerbomb3-fredtool-(twn).txt b/_pages/ca_ES/bannerbomb3-fredtool-(twn).txt index 983e132fe3..7457946013 100644 --- a/_pages/ca_ES/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ca_ES/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/ca_ES/faq.txt b/_pages/ca_ES/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/ca_ES/faq.txt +++ b/_pages/ca_ES/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ca_ES/home.txt b/_pages/ca_ES/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/ca_ES/home.txt +++ b/_pages/ca_ES/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/ca_ES/installing-boot9strap-(fredtool).txt b/_pages/ca_ES/installing-boot9strap-(fredtool).txt index 41fde96a62..9b389ee19f 100644 --- a/_pages/ca_ES/installing-boot9strap-(fredtool).txt +++ b/_pages/ca_ES/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/ca_ES/installing-boot9strap-(hardmod).txt b/_pages/ca_ES/installing-boot9strap-(hardmod).txt index 187273f1a1..4f0888d535 100644 --- a/_pages/ca_ES/installing-boot9strap-(hardmod).txt +++ b/_pages/ca_ES/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt b/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt b/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt index 370ed94c1b..b77ea450ab 100644 --- a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt +++ b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/ca_ES/installing-boot9strap-(soundhax).txt b/_pages/ca_ES/installing-boot9strap-(soundhax).txt index d9c13f9bc7..b94e84c610 100644 --- a/_pages/ca_ES/installing-boot9strap-(soundhax).txt +++ b/_pages/ca_ES/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/ca_ES/installing-boot9strap-(usm).txt b/_pages/ca_ES/installing-boot9strap-(usm).txt index c706e3641d..58be815045 100644 --- a/_pages/ca_ES/installing-boot9strap-(usm).txt +++ b/_pages/ca_ES/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/ca_ES/troubleshooting.txt b/_pages/ca_ES/troubleshooting.txt index 3cb548dda5..ca8c4d8017 100644 --- a/_pages/ca_ES/troubleshooting.txt +++ b/_pages/ca_ES/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/ca_ES/updating-b9s.txt b/_pages/ca_ES/updating-b9s.txt index f105ea0204..e08d20a2fd 100644 --- a/_pages/ca_ES/updating-b9s.txt +++ b/_pages/ca_ES/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/cs_CZ/a9lh-to-b9s.txt b/_pages/cs_CZ/a9lh-to-b9s.txt index f222dc3e5a..f32f814a31 100644 --- a/_pages/cs_CZ/a9lh-to-b9s.txt +++ b/_pages/cs_CZ/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/cs_CZ/bannerbomb3-fredtool-(twn).txt b/_pages/cs_CZ/bannerbomb3-fredtool-(twn).txt index 983e132fe3..7457946013 100644 --- a/_pages/cs_CZ/bannerbomb3-fredtool-(twn).txt +++ b/_pages/cs_CZ/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/cs_CZ/faq.txt b/_pages/cs_CZ/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/cs_CZ/faq.txt +++ b/_pages/cs_CZ/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/cs_CZ/home.txt b/_pages/cs_CZ/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/cs_CZ/home.txt +++ b/_pages/cs_CZ/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt index 41fde96a62..9b389ee19f 100644 --- a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt +++ b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt index 187273f1a1..4f0888d535 100644 --- a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt +++ b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt b/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt +++ b/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt b/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt +++ b/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt index 370ed94c1b..b77ea450ab 100644 --- a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt +++ b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/cs_CZ/installing-boot9strap-(soundhax).txt b/_pages/cs_CZ/installing-boot9strap-(soundhax).txt index d9c13f9bc7..b94e84c610 100644 --- a/_pages/cs_CZ/installing-boot9strap-(soundhax).txt +++ b/_pages/cs_CZ/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/cs_CZ/installing-boot9strap-(usm).txt b/_pages/cs_CZ/installing-boot9strap-(usm).txt index c706e3641d..58be815045 100644 --- a/_pages/cs_CZ/installing-boot9strap-(usm).txt +++ b/_pages/cs_CZ/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/cs_CZ/troubleshooting.txt b/_pages/cs_CZ/troubleshooting.txt index 3cb548dda5..ca8c4d8017 100644 --- a/_pages/cs_CZ/troubleshooting.txt +++ b/_pages/cs_CZ/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/cs_CZ/updating-b9s.txt b/_pages/cs_CZ/updating-b9s.txt index f105ea0204..e08d20a2fd 100644 --- a/_pages/cs_CZ/updating-b9s.txt +++ b/_pages/cs_CZ/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/de_DE/a9lh-to-b9s.txt b/_pages/de_DE/a9lh-to-b9s.txt index ca9c668ab4..443d7ecf38 100644 --- a/_pages/de_DE/a9lh-to-b9s.txt +++ b/_pages/de_DE/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ Beachte, dass auf dem New 3DS die `secret_sector.bin` benötigt wird, um den arm 1. Gib die Tastenkombination zur Bestätigung ein, wenn danach verlangt wird 1. Sobald dies abgeschlossen ist, drücke (A) um das Gerät neuzustarten 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings Falls du auf einem schwarzen Bildschirm steckenbleibst, [folge dieser Anleitung zur Fehlerbehebung](troubleshooting#boot-related-issues-on-modded-devices) 1. Drücke (Start) zum Speichern und neustarten diff --git a/_pages/de_DE/bannerbomb3-fredtool-(twn).txt b/_pages/de_DE/bannerbomb3-fredtool-(twn).txt index 632bb13d05..baa2104263 100644 --- a/_pages/de_DE/bannerbomb3-fredtool-(twn).txt +++ b/_pages/de_DE/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ Um das zu erreichen, werden wir die Verschlüsselung (movable.sed) nutzen, um ei Wenn du ein DSiWare-Backup hast, kann ein ausnutzbarer DSiWare-Titel in DS Download Play injiziert werden, der dann genutzt wird, um Custom Firmware zu installieren. -Diese Anleitung ist NUR für taiwanesische Konsolen (erkennbar an dem T am Ende der Systemversion, zum Beispiel 11.16.0-39T)! Wenn deine Konsole eine andere Region hat, [benutze eine andere Methode](seedminer#next-steps). +Diese Anleitung ist NUR für taiwanesische Konsolen (erkennbar an dem T am Ende der Systemversion, zum Beispiel 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### Was du benötigst @@ -80,7 +80,7 @@ Wenn du ein Konfigurations-Menü siehst, hast du schon Custom Firmware und wenn + Folgendes sollte in dieser Reihenfolge passieren: Ein Progress swirl, kurzes Einfrieren der Bildschirme, der untere Bildschirm wird violett, die Musik hört auf, der 3DS zeigt eine Fehlermeldung und startet sich neu + Wenn du den violetten Bildschirm nicht gesehen hast, ist etwas schiefgegangen 1. Du solltest nun die `42383821.bin` Datei im Stammverzeichnis deiner SD-Karte haben -1. Gehe zu `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` auf deiner SD-Karte +1. Navigiere zu `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` auf deiner SD-Karte 1. Lösche alle `.bin` Dateien im `Nintendo DSiWare` Ordner #### Abschnitt IV - Fredtool @@ -101,7 +101,7 @@ Wenn du ein Konfigurations-Menü siehst, hast du schon Custom Firmware und wenn 1. Kopiere die `484E4441.bin` Datei von dem `hax` Ordner des heruntergeladenen DSiWare-Archives (output_(name).zip) in den `Nintendo DSiWare` Ordner 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an -1. Starte die Systemeinstellungen auf deiner Konsole +1. Starte die Systemeinstellungen auf deinem 3DS 1. Navigiere zu "Data Management" -> "DSiWare" 1. Beim "SD Card" Abschnitt, wähle den "Haxxxxxxxxx!" Titel 1. Drücke "Copy", und dann "OK" @@ -132,27 +132,23 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Schalte deinen 3DS aus -1. Stecke deine SD-Karte in deinen Computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Drücke (Start) zum Speichern und neustarten #### Abschnitt VII - DS Download-Spiel wiederherstellen -1. Navigiere zu `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` auf deiner SD-Karte +1. Gehe zu `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` auf deiner SD-Karte 1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an -1. Launch System Settings on your device +1. Starte die Systemeinstellungen auf deiner Konsole 1. Navigiere zu "Data Management" -> "DSiWare" 1. Beim "SD Card" Abschnitt, wähle den "Haxxxxxxxxx!" Titel 1. Drücke "Copy", und dann "OK" diff --git a/_pages/de_DE/faq.txt b/_pages/de_DE/faq.txt index 94b6d7a06c..cb582ee350 100644 --- a/_pages/de_DE/faq.txt +++ b/_pages/de_DE/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Inhalt"%} {% capture notice-6 %} -**3DS Firmware 11.16.0 wurde vor Kurzem veröffentlicht**. Hier ist, was du wissen solltest: +**The latest 3DS firmware is 11.16.0**. Hier ist, was du wissen solltest: Wenn auf deiner Konsole *Luma 11.0* läuft, ist es *100% sicher* zu updaten. Du kannst deine Luma Version überprüfen, indem du (Select) gedrückt hältst während du deine Konsole hochfährst. - Wenn auf deiner Konsole eine ältere Luma Version installiert ist, solltest du [Luma updaten](checking-for-cfw) bevor du deine Konsole auf 11.16 aktualisierst. -- Wenn dein Gerät noch keine Custom Firmware hat, kannst du sie immer noch gratis ohne zusätzliche Hardware auf dieser Version installieren, aber die empfohlene Methode wurde geändert. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/de_DE/home.txt b/_pages/de_DE/home.txt index 690c5bd801..debb546ce9 100644 --- a/_pages/de_DE/home.txt +++ b/_pages/de_DE/home.txt @@ -9,16 +9,6 @@ header: excerpt: "Eine vollständige Anleitung für 3DS Custom Firmware,
von original zu boot9strap.
" # --- -{% capture notice-6 %} -**3DS Firmware 11.16.0 wurde vor Kurzem veröffentlicht**. Hier ist, was du wissen solltest: - -Wenn auf deiner Konsole *Luma 11.0* läuft, ist es *100% sicher* zu updaten. Du kannst deine Luma Version überprüfen, indem du (Select) gedrückt hältst während du deine Konsole hochfährst. -- Wenn auf deiner Konsole eine ältere Luma Version installiert ist, solltest du [Luma updaten](checking-for-cfw) bevor du deine Konsole auf 11.16 aktualisierst. -- Wenn dein Gerät noch keine Custom Firmware hat, kannst du sie immer noch gratis ohne zusätzliche Hardware auf dieser Version installieren, aber die empfohlene Methode wurde geändert. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Lies alle Einleitungsseiten gründlich durch (einschließlich dieser), bevor du fortfährst. {: .notice--info} diff --git a/_pages/de_DE/installing-boot9strap-(fredtool).txt b/_pages/de_DE/installing-boot9strap-(fredtool).txt index 27317d6b07..cbe1c361a6 100644 --- a/_pages/de_DE/installing-boot9strap-(fredtool).txt +++ b/_pages/de_DE/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Schalte deinen 3DS aus -1. Stecke deine SD-Karte in deinen Computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Drücke (Start) zum Speichern und neustarten At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/de_DE/installing-boot9strap-(hardmod).txt b/_pages/de_DE/installing-boot9strap-(hardmod).txt index 9d0db59470..ac1e9453fd 100644 --- a/_pages/de_DE/installing-boot9strap-(hardmod).txt +++ b/_pages/de_DE/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Entferne deinen Hardmod 1. Schalte deine Konsole an 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Drücke (Start) zum Speichern und neustarten + If you get an error, just continue to the next page diff --git a/_pages/de_DE/installing-boot9strap-(hbl-usm).txt b/_pages/de_DE/installing-boot9strap-(hbl-usm).txt index e8554af71f..3fded6d22b 100644 --- a/_pages/de_DE/installing-boot9strap-(hbl-usm).txt +++ b/_pages/de_DE/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Sobald dies abgeschlossen ist, drücke (A) um das Gerät neuzustarten 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Drücke (Start) zum Speichern und neustarten diff --git a/_pages/de_DE/installing-boot9strap-(kartdlphax).txt b/_pages/de_DE/installing-boot9strap-(kartdlphax).txt index 852e1fd98b..646e25b731 100644 --- a/_pages/de_DE/installing-boot9strap-(kartdlphax).txt +++ b/_pages/de_DE/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Sobald dies abgeschlossen ist, drücke (A) um das Gerät neuzustarten -1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Drücke (Start) zum Speichern und neustarten diff --git a/_pages/de_DE/installing-boot9strap-(ntrboot).txt b/_pages/de_DE/installing-boot9strap-(ntrboot).txt index f9d6c5bc93..0569f43d1a 100644 --- a/_pages/de_DE/installing-boot9strap-(ntrboot).txt +++ b/_pages/de_DE/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ Um die [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme)-Links auf dieser S 1. Stecke deine SD-Karte wieder in deine Konsole 1. Schalte deine Konsole an 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Drücke (Start) um zu Speichern und neu zu starten + If you get an error, just continue to the next page @@ -125,12 +127,12 @@ Folge diesen Schritten erst, wenn du den Rest der Anweisungen auf dieser Seite a 1. Schalte deine Konsole aus 1. Stecke deine SD-Karte in deinen Computer - + Die SD-Karte deines 3DS und *nicht* die SD-Karte deiner Flashkarte + + Die SD-Karte deines 3DS, *nicht* die SD-Karte deiner Flashkarte 1. Erstelle einen Ordner mit dem Namen `ntrboot` im Stammverzeichnis deiner SD-Karte 1. Kopiere die `.bin`-Datei von deiner Flashrom-Backup `.zip` in den Ordner `/ntrboot/` auf dem Stammverzeichnis der SD-Karte 1. Erstelle einen Ordner mit dem Namen `payloads` im `luma`-Ordner auf deiner SD-Karte 1. Kopiere `ntrboot_flasher.firm` in den `/luma/payloads` Ordner der SD-Karte -1. Stecke die SD-Karte wieder in deine Konsole ein +1. Stecke deine SD-Karte wieder in deine Konsole 1. Stecke die ntrboot-kompatible DS / DSi Flashkarte in deine Konsole 1. Starte ntrboot_flasher, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst 1. Lies die Warnung auf dem roten Bildschirm diff --git a/_pages/de_DE/installing-boot9strap-(soundhax).txt b/_pages/de_DE/installing-boot9strap-(soundhax).txt index 95234d91cd..d16d78e278 100644 --- a/_pages/de_DE/installing-boot9strap-(soundhax).txt +++ b/_pages/de_DE/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Sobald dies abgeschlossen ist, drücke (A) um das Gerät neuzustarten 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Drücke (Start) zum Speichern und neustarten + If you get an error, just continue to the next page diff --git a/_pages/de_DE/installing-boot9strap-(usm).txt b/_pages/de_DE/installing-boot9strap-(usm).txt index ebb318a8b4..a8635b49e6 100644 --- a/_pages/de_DE/installing-boot9strap-(usm).txt +++ b/_pages/de_DE/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Sobald dies abgeschlossen ist, drücke (A) um das Gerät neuzustarten 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Drücke (Start) zum Speichern und neustarten diff --git a/_pages/de_DE/troubleshooting.txt b/_pages/de_DE/troubleshooting.txt index b7bf285737..a7dd9e303d 100644 --- a/_pages/de_DE/troubleshooting.txt +++ b/_pages/de_DE/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Füge die `.bin` Erweiterung nicht hinzu, wenn du sie noch nicht siehst. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Füge die `.bin` Erweiterung nicht hinzu, wenn du sie noch nicht siehst. ### "An exception occurred" or Errdisp when opening Picross @@ -411,7 +411,7 @@ This can occur after a CTRTransfer or region change on Old 3DS / 2DS. You will n ### Clear HOME Menu extdata -1. Schalte deinen 3DS aus +1. Schalte deine Konsole aus 1. Stecke deine SD-Karte in deinen Computer 1. Navigate to the `/Nintendo 3DS///extdata/00000000/` folder on your SD card 1. Delete the corresponding folder for your 3DS region: diff --git a/_pages/de_DE/updating-b9s.txt b/_pages/de_DE/updating-b9s.txt index cb003d4481..581e62179a 100644 --- a/_pages/de_DE/updating-b9s.txt +++ b/_pages/de_DE/updating-b9s.txt @@ -51,6 +51,8 @@ Obwohl wir glauben, dass die Nutzung von Custom Firmware online sicher ist, gab 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/el_GR/a9lh-to-b9s.txt b/_pages/el_GR/a9lh-to-b9s.txt index 8ddc62d8d7..d5d9ccbd63 100644 --- a/_pages/el_GR/a9lh-to-b9s.txt +++ b/_pages/el_GR/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση diff --git a/_pages/el_GR/bannerbomb3-fredtool-(twn).txt b/_pages/el_GR/bannerbomb3-fredtool-(twn).txt index bc1151a432..2ab53fb038 100644 --- a/_pages/el_GR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/el_GR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Εισάγετε την κάρτα SD στον υπολογιστή σας -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση #### Section VII - Restoring DS Download Play diff --git a/_pages/el_GR/faq.txt b/_pages/el_GR/faq.txt index fdc9729bec..17c44f57f1 100644 --- a/_pages/el_GR/faq.txt +++ b/_pages/el_GR/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/el_GR/home.txt b/_pages/el_GR/home.txt index 19c26a8c6a..8027333e15 100644 --- a/_pages/el_GR/home.txt +++ b/_pages/el_GR/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/el_GR/installing-boot9strap-(fredtool).txt b/_pages/el_GR/installing-boot9strap-(fredtool).txt index 10cb9515c7..13a48e60aa 100644 --- a/_pages/el_GR/installing-boot9strap-(fredtool).txt +++ b/_pages/el_GR/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Εισάγετε την κάρτα SD στον υπολογιστή σας -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/el_GR/installing-boot9strap-(hardmod).txt b/_pages/el_GR/installing-boot9strap-(hardmod).txt index 9a171fa4d1..7ee6a61c26 100644 --- a/_pages/el_GR/installing-boot9strap-(hardmod).txt +++ b/_pages/el_GR/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση + If you get an error, just continue to the next page diff --git a/_pages/el_GR/installing-boot9strap-(hbl-usm).txt b/_pages/el_GR/installing-boot9strap-(hbl-usm).txt index 423536f806..914d69d35a 100644 --- a/_pages/el_GR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/el_GR/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση diff --git a/_pages/el_GR/installing-boot9strap-(kartdlphax).txt b/_pages/el_GR/installing-boot9strap-(kartdlphax).txt index e533342c68..596cd4f1ed 100644 --- a/_pages/el_GR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/el_GR/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση diff --git a/_pages/el_GR/installing-boot9strap-(ntrboot).txt b/_pages/el_GR/installing-boot9strap-(ntrboot).txt index bd46cc43c7..bc21562474 100644 --- a/_pages/el_GR/installing-boot9strap-(ntrboot).txt +++ b/_pages/el_GR/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση + If you get an error, just continue to the next page diff --git a/_pages/el_GR/installing-boot9strap-(soundhax).txt b/_pages/el_GR/installing-boot9strap-(soundhax).txt index a1c9fe2dca..28e63806ac 100644 --- a/_pages/el_GR/installing-boot9strap-(soundhax).txt +++ b/_pages/el_GR/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση + If you get an error, just continue to the next page diff --git a/_pages/el_GR/installing-boot9strap-(usm).txt b/_pages/el_GR/installing-boot9strap-(usm).txt index 8188464c5d..b4a0326dcd 100644 --- a/_pages/el_GR/installing-boot9strap-(usm).txt +++ b/_pages/el_GR/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση diff --git a/_pages/el_GR/troubleshooting.txt b/_pages/el_GR/troubleshooting.txt index 41074c0d01..6710c837e6 100644 --- a/_pages/el_GR/troubleshooting.txt +++ b/_pages/el_GR/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/el_GR/updating-b9s.txt b/_pages/el_GR/updating-b9s.txt index 75356c8187..46a7af3a0f 100644 --- a/_pages/el_GR/updating-b9s.txt +++ b/_pages/el_GR/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/en_PT/a9lh-to-b9s.txt b/_pages/en_PT/a9lh-to-b9s.txt index ad646a17b4..c8e9b8e679 100644 --- a/_pages/en_PT/a9lh-to-b9s.txt +++ b/_pages/en_PT/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card. 1. When prompted, input th' key combo given to be installin' boot9strap 1. Once it is complete, press (A) to reboot your device 1. Ye device should have rebooted into th' Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save 'n reboot diff --git a/_pages/en_PT/bannerbomb3-fredtool-(twn).txt b/_pages/en_PT/bannerbomb3-fredtool-(twn).txt index e3f119c57d..51b8f6110c 100644 --- a/_pages/en_PT/bannerbomb3-fredtool-(twn).txt +++ b/_pages/en_PT/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off ye device -1. Insert ye SD card into ye computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save 'n reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/en_PT/faq.txt b/_pages/en_PT/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/en_PT/faq.txt +++ b/_pages/en_PT/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/en_PT/home.txt b/_pages/en_PT/home.txt index 2931d59694..473485267d 100644 --- a/_pages/en_PT/home.txt +++ b/_pages/en_PT/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all 'o th' introductory pages (includin' 'tis one!) before proceedin' onward. {: .notice--info} diff --git a/_pages/en_PT/installing-boot9strap-(fredtool).txt b/_pages/en_PT/installing-boot9strap-(fredtool).txt index e22e7c1881..2578cf399c 100644 --- a/_pages/en_PT/installing-boot9strap-(fredtool).txt +++ b/_pages/en_PT/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off ye device -1. Insert ye SD card into ye computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save 'n reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/en_PT/installing-boot9strap-(hardmod).txt b/_pages/en_PT/installing-boot9strap-(hardmod).txt index d755aca429..0ee0a7c238 100644 --- a/_pages/en_PT/installing-boot9strap-(hardmod).txt +++ b/_pages/en_PT/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save 'n reboot + If you get an error, just continue to the next page diff --git a/_pages/en_PT/installing-boot9strap-(hbl-usm).txt b/_pages/en_PT/installing-boot9strap-(hbl-usm).txt index 364071aba6..20464ab525 100644 --- a/_pages/en_PT/installing-boot9strap-(hbl-usm).txt +++ b/_pages/en_PT/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Ye device should have rebooted into th' Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save 'n reboot diff --git a/_pages/en_PT/installing-boot9strap-(kartdlphax).txt b/_pages/en_PT/installing-boot9strap-(kartdlphax).txt index db65d72a9b..dbc609190c 100644 --- a/_pages/en_PT/installing-boot9strap-(kartdlphax).txt +++ b/_pages/en_PT/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Ye device should have rebooted into th' Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save 'n reboot diff --git a/_pages/en_PT/installing-boot9strap-(ntrboot).txt b/_pages/en_PT/installing-boot9strap-(ntrboot).txt index 585de17b7d..aef23a8fde 100644 --- a/_pages/en_PT/installing-boot9strap-(ntrboot).txt +++ b/_pages/en_PT/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert ye SD card into ye device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save 'n reboot + If you get an error, just continue to the next page diff --git a/_pages/en_PT/installing-boot9strap-(soundhax).txt b/_pages/en_PT/installing-boot9strap-(soundhax).txt index 5379ec8492..73b202b251 100644 --- a/_pages/en_PT/installing-boot9strap-(soundhax).txt +++ b/_pages/en_PT/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Ye device should have rebooted into th' Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save 'n reboot + If you get an error, just continue to the next page diff --git a/_pages/en_PT/installing-boot9strap-(usm).txt b/_pages/en_PT/installing-boot9strap-(usm).txt index 1d0a3786d2..02a52b415c 100644 --- a/_pages/en_PT/installing-boot9strap-(usm).txt +++ b/_pages/en_PT/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Ye device should have rebooted into th' Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save 'n reboot diff --git a/_pages/en_PT/troubleshooting.txt b/_pages/en_PT/troubleshooting.txt index 86c2767b5b..dc41de22da 100644 --- a/_pages/en_PT/troubleshooting.txt +++ b/_pages/en_PT/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/en_PT/updating-b9s.txt b/_pages/en_PT/updating-b9s.txt index fdc1f48015..3ead53b285 100644 --- a/_pages/en_PT/updating-b9s.txt +++ b/_pages/en_PT/updating-b9s.txt @@ -51,6 +51,8 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card. 1. Reinsert ye SD card into ye device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/es_ES/a9lh-to-b9s.txt b/_pages/es_ES/a9lh-to-b9s.txt index e8172ff243..cc64651f4f 100644 --- a/_pages/es_ES/a9lh-to-b9s.txt +++ b/_pages/es_ES/a9lh-to-b9s.txt @@ -63,6 +63,8 @@ Para todos los pasos en esta sección, sobreescribe cualquier archivo repetido e 1. Cuando se solicite, introduce la combinación de botones mostrada para instalar boot9strap 1. Once it is complete, press (A) to reboot your device 1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Si la pantalla se queda en negro, [sigue la guía de solución de problemas](troubleshooting#boot-related-issues-on-modded-devices) 1. Presiona (Start) para guardar y reiniciar diff --git a/_pages/es_ES/bannerbomb3-fredtool-(twn).txt b/_pages/es_ES/bannerbomb3-fredtool-(twn).txt index 67362249ea..b14260d18e 100644 --- a/_pages/es_ES/bannerbomb3-fredtool-(twn).txt +++ b/_pages/es_ES/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ Si prefieres una guía visual para esta parte, hay una disponible [aquí](https: 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Apaga tu consola -1. Inserta tu tarjeta SD en tu computadora -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Presiona (Start) para guardar y reiniciar #### Section VII - Restoring DS Download Play diff --git a/_pages/es_ES/faq.txt b/_pages/es_ES/faq.txt index 842d73fd94..2902b420c7 100644 --- a/_pages/es_ES/faq.txt +++ b/_pages/es_ES/faq.txt @@ -4,11 +4,10 @@ title: "Preguntas Frecuentes" {% include toc title="Tabla de Contenidos"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Esto es lo que deberías saber: +**The latest 3DS firmware is 11.16.0**. Esto es lo que deberías saber: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/es_ES/home.txt b/_pages/es_ES/home.txt index 8a3ed74350..79280ba096 100644 --- a/_pages/es_ES/home.txt +++ b/_pages/es_ES/home.txt @@ -9,16 +9,6 @@ header: excerpt: "Una guía completa de custom firmware para 3DS,
desde stock a boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Esto es lo que deberías saber: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Lee detenidamente todas las páginas de introducción (incluido ésta) antes de proceder. {: .notice--info} diff --git a/_pages/es_ES/installing-boot9strap-(fredtool).txt b/_pages/es_ES/installing-boot9strap-(fredtool).txt index e1ff39c76e..80604a7b14 100644 --- a/_pages/es_ES/installing-boot9strap-(fredtool).txt +++ b/_pages/es_ES/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Una vez completado y con la pantalla inferior diciendo "done.", sal de b9sTool, y luego apaga tu consola + Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Apaga tu consola -1. Inserta tu tarjeta SD en tu computadora -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Presiona (Start) para guardar y reiniciar At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/es_ES/installing-boot9strap-(hardmod).txt b/_pages/es_ES/installing-boot9strap-(hardmod).txt index 0a7a4e88ba..1be0726211 100644 --- a/_pages/es_ES/installing-boot9strap-(hardmod).txt +++ b/_pages/es_ES/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Desconecta tu hardmod 1. Enciende tu consola 1. Tu consola debería haber iniciado en el menú de configuración de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Presiona (Start) para guardar y reiniciar + If you get an error, just continue to the next page diff --git a/_pages/es_ES/installing-boot9strap-(hbl-usm).txt b/_pages/es_ES/installing-boot9strap-(hbl-usm).txt index 91994abd28..d6abc23943 100644 --- a/_pages/es_ES/installing-boot9strap-(hbl-usm).txt +++ b/_pages/es_ES/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Presiona (Start) para guardar y reiniciar diff --git a/_pages/es_ES/installing-boot9strap-(kartdlphax).txt b/_pages/es_ES/installing-boot9strap-(kartdlphax).txt index d8956b8319..dd0ca00b75 100644 --- a/_pages/es_ES/installing-boot9strap-(kartdlphax).txt +++ b/_pages/es_ES/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. Cuando se te pida, introduce la combinación de botones mostrada para instalar boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Presiona (Start) para guardar y reiniciar diff --git a/_pages/es_ES/installing-boot9strap-(ntrboot).txt b/_pages/es_ES/installing-boot9strap-(ntrboot).txt index 4d43c566b7..8a4f5322ec 100644 --- a/_pages/es_ES/installing-boot9strap-(ntrboot).txt +++ b/_pages/es_ES/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Vuelve a insertar tu tarjeta SD en tu consola 1. Enciende tu consola 1. Tu consola debería haber iniciado en el menú de configuración de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Presiona (Start) para guardar y reiniciar + If you get an error, just continue to the next page @@ -125,7 +127,7 @@ No sigas esta sección mientras no hayas completado el resto de instrucciones de 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora - + Ésta es la tarjeta SD de tu 3DS, *no* la tarjeta SD de tu flashcart + + Esta es la tarjeta SD de tu 3DS, *no* la tarjeta SD de tu flashcart 1. Crea una carpeta llamada`ntrboot` en la raíz de tu tarjeta SD 1. Copia el archivo `.bin` desde el archivo `.zip` de respaldo de flashrom a la carpeta `/ntrboot/` en la raíz de tu tarjeta SD 1. Crea una carpeta llamada `payloads` en la carpeta `luma` de tu tarjeta SD diff --git a/_pages/es_ES/installing-boot9strap-(soundhax).txt b/_pages/es_ES/installing-boot9strap-(soundhax).txt index bffaa5310a..15aa487da5 100644 --- a/_pages/es_ES/installing-boot9strap-(soundhax).txt +++ b/_pages/es_ES/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. Cuando se te pida, introduce la combinación de botones mostrada para instalar boot9strap 1. Once it is complete, press (A) to reboot your device 1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Presiona (Start) para guardar y reiniciar + If you get an error, just continue to the next page diff --git a/_pages/es_ES/installing-boot9strap-(usm).txt b/_pages/es_ES/installing-boot9strap-(usm).txt index 36bea833ee..df085bfbd4 100644 --- a/_pages/es_ES/installing-boot9strap-(usm).txt +++ b/_pages/es_ES/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Presiona (Start) para guardar y reiniciar diff --git a/_pages/es_ES/troubleshooting.txt b/_pages/es_ES/troubleshooting.txt index 5214d0ed53..fa0f9ac7ca 100644 --- a/_pages/es_ES/troubleshooting.txt +++ b/_pages/es_ES/troubleshooting.txt @@ -70,7 +70,7 @@ El sitio web ha determinado que tu `movable.sed` no puede ser minado. Asegúrate Los archivos `00000001.sav` y/o `otherapp.bin` pueden estar fuera de lugar. Asegúrate de que el archivo `00000001.sav` está en `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`, y que el archivo `otherapp.bin` está en la raíz de la tarjeta SD. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Asegúrate de que el archivo se llama exactamente `00000001.sav` y que utilizaste el `movable.sed` correspondiente a tu consola para crearlo. Vuelve a descargar la última versión de [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) y coloca el archivo en la raíz de la tarjeta SD. No añadas manualmente la extensión `.bin` al archivo si ves que no la tiene. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Asegúrate de que el archivo se llama exactamente `00000001.sav` y que utilizaste el `movable.sed` correspondiente a tu consola para crearlo. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. No añadas manualmente la extensión `.bin` al archivo si ves que no la tiene. ### "An exception occurred" o Errdisp al abrir Picross diff --git a/_pages/es_ES/updating-b9s.txt b/_pages/es_ES/updating-b9s.txt index 2bfb2f9342..f0d94fc3e4 100644 --- a/_pages/es_ES/updating-b9s.txt +++ b/_pages/es_ES/updating-b9s.txt @@ -51,6 +51,8 @@ Para todos los pasos en esta sección, sobreescribe cualquier archivo existente 1. Vuelve a insertar tu tarjeta SD en tu consola 1. Enciende tu consola 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/fi_FI/a9lh-to-b9s.txt b/_pages/fi_FI/a9lh-to-b9s.txt index 421df47e91..bb337f8a5c 100644 --- a/_pages/fi_FI/a9lh-to-b9s.txt +++ b/_pages/fi_FI/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ Korvaa mahdolliset olemassa olevat tiedostot SD-kortillasi kaikissa tämän vaih 1. Syötä kehotettaessa annettu painikeyhdistelmä asentaaksesi boot9strapin 1. Once it is complete, press (A) to reboot your device 1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen diff --git a/_pages/fi_FI/bannerbomb3-fredtool-(twn).txt b/_pages/fi_FI/bannerbomb3-fredtool-(twn).txt index d808ca0086..32b4a94696 100644 --- a/_pages/fi_FI/bannerbomb3-fredtool-(twn).txt +++ b/_pages/fi_FI/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + Voit joutua pakottamaan konsolin sammuksiin pitämällä virtapainiketta pohjassa + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Sammuta konsolisi -1. Aseta SD-korttisi tietokoneeseesi -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen #### Section VII - Restoring DS Download Play diff --git a/_pages/fi_FI/faq.txt b/_pages/fi_FI/faq.txt index 6573622fc4..4beb1a4e39 100644 --- a/_pages/fi_FI/faq.txt +++ b/_pages/fi_FI/faq.txt @@ -4,11 +4,10 @@ title: "UKK" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/fi_FI/home.txt b/_pages/fi_FI/home.txt index 2387e83e63..10e0ca080c 100644 --- a/_pages/fi_FI/home.txt +++ b/_pages/fi_FI/home.txt @@ -9,16 +9,6 @@ header: excerpt: "Perusteellinen opas 3DS:n mukautettuun laiteohjelmistoon,
vakio-ohjelmistosta boot9strapiin.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Lue huolellisesti kaikki johdantosivut (mukaan lukien tämä!) ennen aloittamista. {: .notice--info} diff --git a/_pages/fi_FI/installing-boot9strap-(fredtool).txt b/_pages/fi_FI/installing-boot9strap-(fredtool).txt index c5cc57ec9a..6b044f077f 100644 --- a/_pages/fi_FI/installing-boot9strap-(fredtool).txt +++ b/_pages/fi_FI/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + Voit joutua pakottamaan konsolin sammuksiin pitämällä virtapainiketta pohjassa + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Sammuta konsolisi -1. Aseta SD-korttisi tietokoneeseesi -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/fi_FI/installing-boot9strap-(hardmod).txt b/_pages/fi_FI/installing-boot9strap-(hardmod).txt index b3bfc391e4..6d4c5c4bc2 100644 --- a/_pages/fi_FI/installing-boot9strap-(hardmod).txt +++ b/_pages/fi_FI/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Irrota laitteistomodauksesi 1. Käynnistä konsolisi 1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen + If you get an error, just continue to the next page diff --git a/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt b/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt index 7da17d2030..7c6930db54 100644 --- a/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt +++ b/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen diff --git a/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt b/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt index 4d72a76fb0..765b58818e 100644 --- a/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt +++ b/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen diff --git a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt index 16ed5b70dc..4cc0b67753 100644 --- a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt +++ b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Aseta SD-korttisi takaisin konsoliisi 1. Käynnistä konsolisi 1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen + If you get an error, just continue to the next page diff --git a/_pages/fi_FI/installing-boot9strap-(soundhax).txt b/_pages/fi_FI/installing-boot9strap-(soundhax).txt index d4c82d8a82..1e3870903e 100644 --- a/_pages/fi_FI/installing-boot9strap-(soundhax).txt +++ b/_pages/fi_FI/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen + If you get an error, just continue to the next page diff --git a/_pages/fi_FI/installing-boot9strap-(usm).txt b/_pages/fi_FI/installing-boot9strap-(usm).txt index e2c03f6c19..bb26c6b4ae 100644 --- a/_pages/fi_FI/installing-boot9strap-(usm).txt +++ b/_pages/fi_FI/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen diff --git a/_pages/fi_FI/troubleshooting.txt b/_pages/fi_FI/troubleshooting.txt index 5b499fb2a6..45d32a383e 100644 --- a/_pages/fi_FI/troubleshooting.txt +++ b/_pages/fi_FI/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/fi_FI/updating-b9s.txt b/_pages/fi_FI/updating-b9s.txt index 645e464396..6a1b042419 100644 --- a/_pages/fi_FI/updating-b9s.txt +++ b/_pages/fi_FI/updating-b9s.txt @@ -51,6 +51,8 @@ Korvaa mahdolliset olemassa olevat tiedostot SD-kortillasi kaikissa tämän vaih 1. Aseta SD-korttisi takaisin konsoliisi 1. Käynnistä konsolisi 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/fr_FR/a9lh-to-b9s.txt b/_pages/fr_FR/a9lh-to-b9s.txt index 6f92f592ef..b4004b7307 100644 --- a/_pages/fr_FR/a9lh-to-b9s.txt +++ b/_pages/fr_FR/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants 1. Quand cela est demandé, appuyez sur la combinaison de boutons donnée pour installer boot9strap 1. Once it is complete, press (A) to reboot your device 1. Votre console va redémarrer dans la configuration de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer diff --git a/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt b/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt index d566845452..d530825140 100644 --- a/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ Si vous préférez un guide visuel pour cette section, un tel guide est disponib 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Éteignez votre 3DS -1. Insérez votre carte SD dans votre ordinateur -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer #### Section VII - Restoring DS Download Play diff --git a/_pages/fr_FR/faq.txt b/_pages/fr_FR/faq.txt index 5edb61c697..9f8f4625ff 100644 --- a/_pages/fr_FR/faq.txt +++ b/_pages/fr_FR/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Voici ce que vous devriez savoir : +**The latest 3DS firmware is 11.16.0**. Voici ce que vous devriez savoir : - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/fr_FR/home.txt b/_pages/fr_FR/home.txt index 805224b849..51f1356081 100644 --- a/_pages/fr_FR/home.txt +++ b/_pages/fr_FR/home.txt @@ -9,16 +9,6 @@ header: excerpt: "Un guide complet pour le custom firmware de 3DS,
depuis le firmware original vers boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Voici ce que vous devriez savoir : - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Lisez attentivement toutes les pages d'introduction (y compris celle-ci !) avant de continuer. {: .notice--info} diff --git a/_pages/fr_FR/installing-boot9strap-(fredtool).txt b/_pages/fr_FR/installing-boot9strap-(fredtool).txt index 045edf727a..ae0e186338 100644 --- a/_pages/fr_FR/installing-boot9strap-(fredtool).txt +++ b/_pages/fr_FR/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Une fois que le processus est terminé et que vous voyez le message "done." s'afficher sur l'écran du bas, quittez b9sTool, puis éteignez votre console + Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Éteignez votre 3DS -1. Insérez votre carte SD dans votre ordinateur -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/fr_FR/installing-boot9strap-(hardmod).txt b/_pages/fr_FR/installing-boot9strap-(hardmod).txt index db7684834f..62cb9eea51 100644 --- a/_pages/fr_FR/installing-boot9strap-(hardmod).txt +++ b/_pages/fr_FR/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Déconnectez votre hardmod 1. Allumez votre console 1. Votre console va démarrer dans la configuration de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer + If you get an error, just continue to the next page diff --git a/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt b/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt index c1bc3c7f73..19f4350998 100644 --- a/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Votre console va redémarrer dans la configuration de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer diff --git a/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt b/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt index 03f3ceff9b..cbfce3feb3 100644 --- a/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l'écran supérieur pour installer boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Votre console va redémarrer dans la configuration de Luma3DS +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer diff --git a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt index e26e47a1bd..988148a260 100644 --- a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt +++ b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Réinsérez votre carte SD dans votre 3DS 1. Allumez votre console 1. Votre console va démarrer dans la configuration de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer + If you get an error, just continue to the next page diff --git a/_pages/fr_FR/installing-boot9strap-(soundhax).txt b/_pages/fr_FR/installing-boot9strap-(soundhax).txt index 2161ef5170..84b5b16ebd 100644 --- a/_pages/fr_FR/installing-boot9strap-(soundhax).txt +++ b/_pages/fr_FR/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l'écran supérieur pour installer boot9strap 1. Once it is complete, press (A) to reboot your device 1. Votre console va redémarrer dans la configuration de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer + If you get an error, just continue to the next page diff --git a/_pages/fr_FR/installing-boot9strap-(usm).txt b/_pages/fr_FR/installing-boot9strap-(usm).txt index fb444f460b..c4e776ec22 100644 --- a/_pages/fr_FR/installing-boot9strap-(usm).txt +++ b/_pages/fr_FR/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Votre console va redémarrer dans la configuration de Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer diff --git a/_pages/fr_FR/troubleshooting.txt b/_pages/fr_FR/troubleshooting.txt index 17886a46b2..d82aebcbe7 100644 --- a/_pages/fr_FR/troubleshooting.txt +++ b/_pages/fr_FR/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/fr_FR/updating-b9s.txt b/_pages/fr_FR/updating-b9s.txt index 391b40c33a..b4e4cd415f 100644 --- a/_pages/fr_FR/updating-b9s.txt +++ b/_pages/fr_FR/updating-b9s.txt @@ -51,6 +51,8 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants 1. Réinsérez votre carte SD dans votre 3DS 1. Allumez votre console 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/he_IL/a9lh-to-b9s.txt b/_pages/he_IL/a9lh-to-b9s.txt index 692244bf17..f4b8f738ff 100644 --- a/_pages/he_IL/a9lh-to-b9s.txt +++ b/_pages/he_IL/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. כאשר תתבקשו, תלחצו על הכפתורים שנתונים לכם כדי להתקין את boot9strap 1. Once it is complete, press (A) to reboot your device 1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש diff --git a/_pages/he_IL/bannerbomb3-fredtool-(twn).txt b/_pages/he_IL/bannerbomb3-fredtool-(twn).txt index ba4299c50f..2c0ea5c8b2 100644 --- a/_pages/he_IL/bannerbomb3-fredtool-(twn).txt +++ b/_pages/he_IL/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. תכבו את המכשיר -1. תכניסו את ה-SD שלכם למחשב -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש #### Section VII - Restoring DS Download Play diff --git a/_pages/he_IL/faq.txt b/_pages/he_IL/faq.txt index 87f65283e0..f786d3a583 100644 --- a/_pages/he_IL/faq.txt +++ b/_pages/he_IL/faq.txt @@ -4,11 +4,10 @@ title: "שאלות ותשובות" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/he_IL/home.txt b/_pages/he_IL/home.txt index 8618db3223..edd6edb4e5 100644 --- a/_pages/he_IL/home.txt +++ b/_pages/he_IL/home.txt @@ -9,16 +9,6 @@ header: excerpt: "מדריך שלם לפריצת 3DS,
מהחנות עד ל boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- תקראו ביסודיות את כל הדפים המקדימים (כולל את זה!) לפני שאתם ממשיכים. {: .notice--info} diff --git a/_pages/he_IL/installing-boot9strap-(fredtool).txt b/_pages/he_IL/installing-boot9strap-(fredtool).txt index ea2da2b28b..45ece5b468 100644 --- a/_pages/he_IL/installing-boot9strap-(fredtool).txt +++ b/_pages/he_IL/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. תכבו את המכשיר -1. תכניסו את ה-SD שלכם למחשב -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/he_IL/installing-boot9strap-(hardmod).txt b/_pages/he_IL/installing-boot9strap-(hardmod).txt index 360f96d0ac..640215392a 100644 --- a/_pages/he_IL/installing-boot9strap-(hardmod).txt +++ b/_pages/he_IL/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. תפעילו את המכשיר 1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש + If you get an error, just continue to the next page diff --git a/_pages/he_IL/installing-boot9strap-(hbl-usm).txt b/_pages/he_IL/installing-boot9strap-(hbl-usm).txt index ebed7b2e7a..3a7e267c99 100644 --- a/_pages/he_IL/installing-boot9strap-(hbl-usm).txt +++ b/_pages/he_IL/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש diff --git a/_pages/he_IL/installing-boot9strap-(kartdlphax).txt b/_pages/he_IL/installing-boot9strap-(kartdlphax).txt index 5ce71df7c1..670acd04e7 100644 --- a/_pages/he_IL/installing-boot9strap-(kartdlphax).txt +++ b/_pages/he_IL/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש diff --git a/_pages/he_IL/installing-boot9strap-(ntrboot).txt b/_pages/he_IL/installing-boot9strap-(ntrboot).txt index 18049cffe7..63aeeb0ebe 100644 --- a/_pages/he_IL/installing-boot9strap-(ntrboot).txt +++ b/_pages/he_IL/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם 1. תפעילו את המכשיר 1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש + If you get an error, just continue to the next page diff --git a/_pages/he_IL/installing-boot9strap-(soundhax).txt b/_pages/he_IL/installing-boot9strap-(soundhax).txt index a39a3fae24..fdc0baa95f 100644 --- a/_pages/he_IL/installing-boot9strap-(soundhax).txt +++ b/_pages/he_IL/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש + If you get an error, just continue to the next page diff --git a/_pages/he_IL/installing-boot9strap-(usm).txt b/_pages/he_IL/installing-boot9strap-(usm).txt index 21274bd4ed..db3053b1ea 100644 --- a/_pages/he_IL/installing-boot9strap-(usm).txt +++ b/_pages/he_IL/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש diff --git a/_pages/he_IL/troubleshooting.txt b/_pages/he_IL/troubleshooting.txt index 4caf413b21..789916755c 100644 --- a/_pages/he_IL/troubleshooting.txt +++ b/_pages/he_IL/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/he_IL/updating-b9s.txt b/_pages/he_IL/updating-b9s.txt index 04198be91a..30ac176a59 100644 --- a/_pages/he_IL/updating-b9s.txt +++ b/_pages/he_IL/updating-b9s.txt @@ -51,6 +51,8 @@ While we believe that custom firmware is safe for online use, there have been on 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם 1. תפעילו את המכשיר 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/hr_HR/a9lh-to-b9s.txt b/_pages/hr_HR/a9lh-to-b9s.txt index f222dc3e5a..f32f814a31 100644 --- a/_pages/hr_HR/a9lh-to-b9s.txt +++ b/_pages/hr_HR/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt b/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt index 983e132fe3..7457946013 100644 --- a/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/hr_HR/faq.txt b/_pages/hr_HR/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/hr_HR/faq.txt +++ b/_pages/hr_HR/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/hr_HR/home.txt b/_pages/hr_HR/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/hr_HR/home.txt +++ b/_pages/hr_HR/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/hr_HR/installing-boot9strap-(fredtool).txt b/_pages/hr_HR/installing-boot9strap-(fredtool).txt index 41fde96a62..9b389ee19f 100644 --- a/_pages/hr_HR/installing-boot9strap-(fredtool).txt +++ b/_pages/hr_HR/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/hr_HR/installing-boot9strap-(hardmod).txt b/_pages/hr_HR/installing-boot9strap-(hardmod).txt index 187273f1a1..4f0888d535 100644 --- a/_pages/hr_HR/installing-boot9strap-(hardmod).txt +++ b/_pages/hr_HR/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt b/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt b/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/hr_HR/installing-boot9strap-(ntrboot).txt b/_pages/hr_HR/installing-boot9strap-(ntrboot).txt index 370ed94c1b..b77ea450ab 100644 --- a/_pages/hr_HR/installing-boot9strap-(ntrboot).txt +++ b/_pages/hr_HR/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/hr_HR/installing-boot9strap-(soundhax).txt b/_pages/hr_HR/installing-boot9strap-(soundhax).txt index d9c13f9bc7..b94e84c610 100644 --- a/_pages/hr_HR/installing-boot9strap-(soundhax).txt +++ b/_pages/hr_HR/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/hr_HR/installing-boot9strap-(usm).txt b/_pages/hr_HR/installing-boot9strap-(usm).txt index c706e3641d..58be815045 100644 --- a/_pages/hr_HR/installing-boot9strap-(usm).txt +++ b/_pages/hr_HR/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/hr_HR/troubleshooting.txt b/_pages/hr_HR/troubleshooting.txt index 3cb548dda5..ca8c4d8017 100644 --- a/_pages/hr_HR/troubleshooting.txt +++ b/_pages/hr_HR/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/hr_HR/updating-b9s.txt b/_pages/hr_HR/updating-b9s.txt index f105ea0204..e08d20a2fd 100644 --- a/_pages/hr_HR/updating-b9s.txt +++ b/_pages/hr_HR/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/hu_HU/a9lh-to-b9s.txt b/_pages/hu_HU/a9lh-to-b9s.txt index ca5fc93960..c70b46a14b 100644 --- a/_pages/hu_HU/a9lh-to-b9s.txt +++ b/_pages/hu_HU/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ A most következő lépésekben mindig írd felül az SD kártyán található f 1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et 1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Ha fekete képernyőt kapsz, [nézd át ezt a hibaelhárítási útmutatót](troubleshooting#boot-related-issues-on-modded-devices) 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot diff --git a/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt b/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt index 876904e92a..391a8a7112 100644 --- a/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt +++ b/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ Hogy ezt elérjük, szükségünk van a rendszer titkosítási kulcsára (movabl Ha van egy DSiWare mentésed, egy exploitolható DSiWare cím injektálható a DS Download Play-be, amivel telepíthető az egyéni firmware. -Ezek a lépések CSAK tajvani konzolokhoz jók (amit T betű jelez a rendszer verzió mögött, mint például 11.16.0-39**T**)! Ha a konzolod más régióból van [válassz egy másik metódust](seedminer#next-steps). +Ezek a lépések CSAK tajvani konzolokhoz jók (amit T betű jelez a rendszer verzió mögött, mint például 11.16.0-39**T**)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### Amire szükséged lesz @@ -132,19 +132,15 @@ Ha inkább egy vizuális útmutatót szeretnél ehhez a fejezethez, [itt](https: 1. Ha végzett és az alsó képernyő azt mondja "done.", lépj ki a b9sTool-ból, majd kapcsold ki eszközöd + Elképzelhető, hogy kényszerítened kell a leállást a bekapcsológomb lenyomva tartásával + Ha a készüléked kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a `boot.firm` fájlt a Luma3DS `.zip` fájlból az SD kártya gyökerébe - + Ha a Luma konfigurációs képernyőjét látod, nyomj (Start) gombot a reboot-hoz, majd folytasd az útmutatót + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### VI. rész - Luma3DS ellenőrzés +#### Section VI - Luma3DS Configuration -1. Kapcsold ki a készüléked -1. Helyezd az SD kártyád a számítógépbe -1. Ellenőrizd, hogy a `luma` mappa létezik-e és hogy megtalálható-e benne a `config.ini` fájl - + Ezen mappák és fájlok létezése megerősíti azt, hogy a Luma3DS telepítve van - + Ha nem látod a `luma` mappát vagy `config.ini` fájlt, [kövesd a hibaelhárítási útmutatót](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be. - + A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat. - + A következő oldalon hasznos homebrew alkalmaásokat telepítünk, hogy teljessé tegyük a telepítésedet. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot #### VII. rész - A DS Download Play visszaállítása @@ -155,7 +151,7 @@ Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be. 1. Lépj be a System Settings-be a készülékeden 1. Navigálj ide: `Data Management` -> `DSiWare` 1. Az "SD Card" szekcióban válaszd a "Haxxxxxxxxx!" címet -1. Válassza a "Copy"-t, majd az "OK"-t +1. Válaszd a "Copy"-t, majd az "OK"-t 1. Lépj ki a System Settings-ből 1. Kapcsold ki a készüléked diff --git a/_pages/hu_HU/faq.txt b/_pages/hu_HU/faq.txt index 335311efbf..25a90654aa 100644 --- a/_pages/hu_HU/faq.txt +++ b/_pages/hu_HU/faq.txt @@ -4,11 +4,10 @@ title: "GYIK" {% include toc title="Tartalomjegyzék" %} {% capture notice-6 %} -**3DS firmware 11.16.0 nemrég került kiadásra**. Amit érdemes tudnod: +**The latest 3DS firmware is 11.16.0**. Amit érdemes tudnod: - Ha az eszközöd *Luma 11.0* -t futtat, *100% biztonságos* a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával az eszközöd elindítása közben. - Ha az eszközöd régebbi Luma verziót futtat, [frissítened kell a Luma-t](checking-for-cfw) mielőtt az eszközöd 11.16.0 verzióra frissíted. -- Ha az eszközöd nem rendelkezik egyedi firmware-rel, telepítheted ezt a verziót bármilyen további hardver nélkül, de az ajánlott metódus megváltozik. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/hu_HU/home.txt b/_pages/hu_HU/home.txt index f5c389906e..0f8b0402a1 100644 --- a/_pages/hu_HU/home.txt +++ b/_pages/hu_HU/home.txt @@ -9,16 +9,6 @@ header: excerpt: "Egy teljes útmutató egyedi 3DS firmware-hez,
gyári állapottól boot9strap-ig.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 nemrég került kiadásra**. Amit érdemes tudnod: - -- Ha az eszközöd *Luma 11.0* -t futtat, *100% biztonságos* a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával az eszközöd elindítása közben. -- Ha az eszközöd régebbi Luma verziót futtat, [frissítened kell a Luma-t](checking-for-cfw) mielőtt az eszközöd 11.16.0 verzióra frissíted. -- Ha az eszközöd nem rendelkezik egyedi firmware-rel, telepítheted ezt a verziót bármilyen további hardver nélkül, de az ajánlott metódus megváltozik. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Alaposan olvasd végig az összes bevezető oldalt (beleértve ezt is) mielőtt bármibe belekezdenél. {: .notice--info} diff --git a/_pages/hu_HU/installing-boot9strap-(fredtool).txt b/_pages/hu_HU/installing-boot9strap-(fredtool).txt index 2ad3772909..01161f4419 100644 --- a/_pages/hu_HU/installing-boot9strap-(fredtool).txt +++ b/_pages/hu_HU/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ Ebben a fejezetben végrehajtasz egy specifikus lépés sorozatot a Flipnote Stu 1. Ha végzett és az alsó képernyő azt mondja "done." lépj ki a b9sTool-ból, majd kapcsold ki eszközöd + Elképzelhető, hogy kényszerítened kell a leállást a bekapcsológomb lenyomva tartásával + Ha a készüléked kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a `boot.firm` fájlt a Luma3DS `.zip` fájlból az SD kártya gyökerébe - + Ha a Luma konfigurációs képernyőjét látod, nyomj (Start) gombot a reboot-hoz, majd folytasd az útmutatót + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### VI. rész - Luma3DS ellenőrzés +#### Section VI - Luma3DS Configuration -A használt exploit természete, hogy alkalmanként (de ritkán) lehetséges, hogy a boot9strap nem kerül telepítésre. Ez a fejezet ezért ellenőrzi, hogy a boot9strap sikeresen telepítésre került-e az által, hogy megvizsgálja, hogy néhány fájl, amit a Luma3DS létrehoz létrejött-e. - -1. Kapcsold ki a készüléked -1. Helyezd az SD kártyád a számítógépbe -1. Ellenőrizd, hogy a `luma` mappa létezik-e és hogy megtalálható-e benne a `config.ini` fájl - + Ezen mappák és fájlok létezése megerősíti azt, hogy a Luma3DS telepítve van - + Ha nem látod a `luma` mappát vagy `config.ini` fájlt, [kövesd a hibaelhárítási útmutatót](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be. + A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat. diff --git a/_pages/hu_HU/installing-boot9strap-(hardmod).txt b/_pages/hu_HU/installing-boot9strap-(hardmod).txt index 90a27d20b3..c85ffd3e76 100644 --- a/_pages/hu_HU/installing-boot9strap-(hardmod).txt +++ b/_pages/hu_HU/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ Ebben a fejezetben telepíteni fogod az egyedi firmware-t a mentett NAND képfá 1. Válaszd le a hardmododat 1. Kapcsold be a készülékedet 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Ha a készüléked kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a `boot.firm` fájlt a Luma3DS `.zip` fájlból az SD kártya gyökerébe 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot + Ha ezen a ponton hibát kapsz, csak folytasd az útmutatót a következő oldalon diff --git a/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt b/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt index 861628bf2e..df9643fc19 100644 --- a/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt +++ b/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ Ebben a fejezetben egyedi firmware-t fogsz telepíteni az eszközödre. + Ha felső képernyő üres, kapcsold ki az eszközödet, majd csináld újra a III. részt 1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Ha a készüléked kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a `boot.firm` fájlt a Luma3DS `.zip` fájlból az SD kártya gyökerébe 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot diff --git a/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt b/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt index 43993e4508..e8975330d1 100644 --- a/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt +++ b/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ Ebben a fejezetben egyedi firmware-t fogsz telepíteni az eszközödre. 1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et + Ha felső képernyő üres, kapcsold ki az eszközödet, majd csináld újra a III. részt 1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához -1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Ha a készüléked kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a `boot.firm` fájlt a Luma3DS `.zip` fájlból az SD kártya gyökerébe 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot diff --git a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt index e6f288b3aa..7e4ee3fc7a 100644 --- a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt +++ b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Ha a készüléked kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a `boot.firm` fájlt a Luma3DS `.zip` fájlból az SD kártya gyökerébe 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot + Ha ezen a ponton hibát kapsz, csak folytasd az útmutatót a következő oldalon diff --git a/_pages/hu_HU/installing-boot9strap-(soundhax).txt b/_pages/hu_HU/installing-boot9strap-(soundhax).txt index 5a9457077f..657c0a38fc 100644 --- a/_pages/hu_HU/installing-boot9strap-(soundhax).txt +++ b/_pages/hu_HU/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ Ebben a fejezetben egyedi firmware-t fogsz telepíteni az eszközödre. 1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et 1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Ha a készüléked kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a `boot.firm` fájlt a Luma3DS `.zip` fájlból az SD kártya gyökerébe 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot + Ha ezen a ponton hibát kapsz, csak folytasd az útmutatót a következő oldalon diff --git a/_pages/hu_HU/installing-boot9strap-(usm).txt b/_pages/hu_HU/installing-boot9strap-(usm).txt index b9aaa5ee38..941704d698 100644 --- a/_pages/hu_HU/installing-boot9strap-(usm).txt +++ b/_pages/hu_HU/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ Ebben a fejezetben egyedi firmware-t fogsz telepíteni az eszközödre. + Ha felső képernyő üres, kapcsold ki az eszközödet, majd csináld újra a III. részt 1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Ha a készüléked kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a `boot.firm` fájlt a Luma3DS `.zip` fájlból az SD kártya gyökerébe 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot diff --git a/_pages/hu_HU/troubleshooting.txt b/_pages/hu_HU/troubleshooting.txt index 8490b41587..550725dad9 100644 --- a/_pages/hu_HU/troubleshooting.txt +++ b/_pages/hu_HU/troubleshooting.txt @@ -70,7 +70,7 @@ A weboldal úgy találta, hogy a `movable.sed`-ed nem brute-force-olható. Ellen A `00000001.sav` és/vagy `otherapp.bin` fájljaid rossz helyre lehettek rakva. Biztosítsd, hogy a `00000001.sav` a `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` mappában legyen és az `otherapp.bin` pedig az SD kártyád gyökerében. -Ha a fájljaid jó helyen vannak, hozd létre újra a mentéseket a [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx) használatával, majd rakd őket a `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` mappába. Ügyelj arra, hogy a fájl pontosan `00000001.sav` nevű legyen és hogy a konzolod `movable.sed`-jét használd a létrehozáshoz. Töltsd le újra a legutolsó kiadását az [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)-nak és rakd az SD kártyád gyökerébe. Ne add hozzá a `.bin` kiterjesztést, ha nem látod. +Ha a fájljaid jó helyen vannak, hozd létre újra a mentéseket a [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx) használatával, majd rakd őket a `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` mappába. Ügyelj arra, hogy a fájl pontosan `00000001.sav` nevű legyen és hogy a konzolod `movable.sed`-jét használd a létrehozáshoz. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Ne add hozzá a `.bin` kiterjesztést, ha nem látod. ### "An exception occurred" vagy Errdisp a Picross megnyitásakor diff --git a/_pages/hu_HU/updating-b9s.txt b/_pages/hu_HU/updating-b9s.txt index c2fde02519..e4ba2c183b 100644 --- a/_pages/hu_HU/updating-b9s.txt +++ b/_pages/hu_HU/updating-b9s.txt @@ -51,6 +51,8 @@ A most következő lépésekben mindig írd felül az SD kártyán található f 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet 1. Ha az eszközöd a Luma3DS konfigurációs menübe bootolt, nyomj (Start) gombot a mentéshez és az újraindításhoz + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/id_ID/a9lh-to-b9s.txt b/_pages/id_ID/a9lh-to-b9s.txt index f222dc3e5a..f32f814a31 100644 --- a/_pages/id_ID/a9lh-to-b9s.txt +++ b/_pages/id_ID/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/id_ID/bannerbomb3-fredtool-(twn).txt b/_pages/id_ID/bannerbomb3-fredtool-(twn).txt index 983e132fe3..7457946013 100644 --- a/_pages/id_ID/bannerbomb3-fredtool-(twn).txt +++ b/_pages/id_ID/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/id_ID/faq.txt b/_pages/id_ID/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/id_ID/faq.txt +++ b/_pages/id_ID/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/id_ID/home.txt b/_pages/id_ID/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/id_ID/home.txt +++ b/_pages/id_ID/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/id_ID/installing-boot9strap-(fredtool).txt b/_pages/id_ID/installing-boot9strap-(fredtool).txt index 41fde96a62..9b389ee19f 100644 --- a/_pages/id_ID/installing-boot9strap-(fredtool).txt +++ b/_pages/id_ID/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/id_ID/installing-boot9strap-(hardmod).txt b/_pages/id_ID/installing-boot9strap-(hardmod).txt index 187273f1a1..4f0888d535 100644 --- a/_pages/id_ID/installing-boot9strap-(hardmod).txt +++ b/_pages/id_ID/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/id_ID/installing-boot9strap-(hbl-usm).txt b/_pages/id_ID/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/id_ID/installing-boot9strap-(hbl-usm).txt +++ b/_pages/id_ID/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt +++ b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/id_ID/installing-boot9strap-(ntrboot).txt b/_pages/id_ID/installing-boot9strap-(ntrboot).txt index 370ed94c1b..b77ea450ab 100644 --- a/_pages/id_ID/installing-boot9strap-(ntrboot).txt +++ b/_pages/id_ID/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/id_ID/installing-boot9strap-(soundhax).txt b/_pages/id_ID/installing-boot9strap-(soundhax).txt index d9c13f9bc7..b94e84c610 100644 --- a/_pages/id_ID/installing-boot9strap-(soundhax).txt +++ b/_pages/id_ID/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/id_ID/installing-boot9strap-(usm).txt b/_pages/id_ID/installing-boot9strap-(usm).txt index c706e3641d..58be815045 100644 --- a/_pages/id_ID/installing-boot9strap-(usm).txt +++ b/_pages/id_ID/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/id_ID/troubleshooting.txt b/_pages/id_ID/troubleshooting.txt index 3cb548dda5..ca8c4d8017 100644 --- a/_pages/id_ID/troubleshooting.txt +++ b/_pages/id_ID/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/id_ID/updating-b9s.txt b/_pages/id_ID/updating-b9s.txt index f105ea0204..e08d20a2fd 100644 --- a/_pages/id_ID/updating-b9s.txt +++ b/_pages/id_ID/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/it_IT/a9lh-to-b9s.txt b/_pages/it_IT/a9lh-to-b9s.txt index 3f94bb94cb..08ef14bf90 100644 --- a/_pages/it_IT/a9lh-to-b9s.txt +++ b/_pages/it_IT/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ Se durante questa sezione ti verrà chiesto di sovrascrivere dei file sulla tua 1. Quando richiesto, inserisci la combinazione di tasti richiesta a schermo per installare boot9strap 1. Una volta completato il processo, premi (A) per riavviare la tua console 1. La tua console dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS + + Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug + + Ai fini di questa guida, queste impostazioni rimarranno sui valori predefiniti + Se ottieni una schermata nera, [segui questa guida](troubleshooting#boot-related-issues-on-modded-devices) 1. Premi (Start) per salvare e riavviare il 3DS diff --git a/_pages/it_IT/bannerbomb3-fredtool-(twn).txt b/_pages/it_IT/bannerbomb3-fredtool-(twn).txt index b4dd8b4129..e49d18077d 100644 --- a/_pages/it_IT/bannerbomb3-fredtool-(twn).txt +++ b/_pages/it_IT/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ Per realizzare l'obiettivo, utilizziamo la chiave di cifratura della tua console Una volta ottenuto un backup DSiWare, si può initiettare nella "Modalità download" un titolo DSiWare utilizzabile per installare un custom firmware. -Queste istruzioni sono SOLO per le console taiwanesi (indicate da una T alla fine della versione di sistema, ad esempio 11.16.0-39T)! Se la tua console proviene da qualsiasi altra regione, [scegli un altro metodo](seedminer#next-steps). +Queste istruzioni sono SOLO per le console taiwanesi (indicate da una T alla fine della versione di sistema, ad esempio 11.16.0-39T)! Se la tua console proviene da qualsiasi altra regione, [scegli l'altro metodo](bannerbomb3). {: .notice--warning} ### Cosa serve @@ -132,19 +132,15 @@ Se desideri una guida visiva per questa parte, è disponibile [qui](https://zoog 1. Al termine, quando lo schermo inferiore presenterà la scritta "done.", esci da b9sTool, quindi spegni la console + Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione + Se la console dovesse spegnersi quando provi ad accenderla, assicurati di aver copiato il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD - + Se vedi la schermata di configurazione di Luma, premi (Start) per riavviare la console, quindi continua con la guida + + Se vedi la schermata di Configurazione Luma, spegni la tua console e procedi alla sezione successiva -#### Sezione VI - Verifica di Luma3DS +#### Sezione VI - Configurazione di Luma3DS -1. Spegni il tuo 3DS -1. Inserisci la scheda SD nel tuo computer -1. Assicurati che esista una cartella `luma` e che all'interno ci sia il file `config.ini` - + La presenza di queste cartelle e file conferma che Luma3DS è stato installato - + Se non trovi la cartella `luma` o il file `config.ini`, [segui questa guida per risolvere il problema](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -A questo punto, la console avvierà sempre Luma3DS. - + Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware. - + Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione. +1. Premi (Select) e accendi la console continuando a tenerlo premuto. Verrà avviata la configurazione di Luma3DS + + Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug + + Ai fini di questa guida, queste impostazioni rimarranno sui valori predefiniti + + Se viene avviato il menu HOME [segui questa guida per risolvere il problema](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Premi (Start) per salvare e riavviare il 3DS #### Sezione VII - Ripristino della Modalità Download DS diff --git a/_pages/it_IT/faq.txt b/_pages/it_IT/faq.txt index 767caf38c8..ed8371ae20 100644 --- a/_pages/it_IT/faq.txt +++ b/_pages/it_IT/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Indice"%} {% capture notice-6 %} -**Recentemente è stata rilasciata la versione del software 3DS 11.16.0**. Ecco cosa dovresti sapere: +**L'ultima versione del software 3DS è 11.16.0**. Ecco cosa dovresti sapere: - Se la tua console sta eseguendo *Luma 11.0*, è *al 100% sicuro* eseguire l'aggiornamento. Puoi controllare la versione di Luma tenendo premuto (Select) durante l'avvio della console. - Se la tua console ha una versione precedente di Luma, dovresti [aggiornare Luma](checking-for-cfw) prima di aggiornare la tua console alla versione 11.16.0. -- Se la tua console non ha ancora un custom firmware, puoi comunque installarlo gratuitamente su questa versione senza hardware aggiuntivo, ma il metodo consigliato è stato cambiato. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/it_IT/home.txt b/_pages/it_IT/home.txt index 67e4e2e362..bd18f31b36 100644 --- a/_pages/it_IT/home.txt +++ b/_pages/it_IT/home.txt @@ -9,16 +9,6 @@ header: excerpt: "La guida omnicomprensiva per installare
un custom firmware su 3DS, da zero a boot9strap.
" --- -{% capture notice-6 %} -**Recentemente è stata rilasciata la versione del software 3DS 11.16.0**. Ecco cosa dovresti sapere: - -- Se la tua console sta eseguendo *Luma 11.0*, è *al 100% sicuro* eseguire l'aggiornamento. Puoi controllare la versione di Luma tenendo premuto (Select) durante l'avvio della console. -- Se la tua console ha una versione precedente di Luma, dovresti [aggiornare Luma](checking-for-cfw) prima di aggiornare la tua console alla versione 11.16.0. -- Se la tua console non ha ancora un custom firmware, puoi comunque installarlo gratuitamente su questa versione senza hardware aggiuntivo, ma il metodo consigliato è stato cambiato. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Leggi attentamente tutte le pagine introduttive (compresa questa!) prima di continuare. {: .notice--info} diff --git a/_pages/it_IT/installing-boot9strap-(fredtool).txt b/_pages/it_IT/installing-boot9strap-(fredtool).txt index 39d91cecc2..62fce0100c 100644 --- a/_pages/it_IT/installing-boot9strap-(fredtool).txt +++ b/_pages/it_IT/installing-boot9strap-(fredtool).txt @@ -108,22 +108,20 @@ In questa sezione eseguirai una serie di passaggi molto specifici all'interno di 1. Seleziona il quarto riquadro con la lettera "A" all'interno 1. Se l'exploit ha avuto successo, la tua console avrà caricato b9sTool 1. Usando il D-Pad, vai su "Install boot9strap" - + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 6 of Section IV + + Se salti questo passaggio, la console si riavvierà nel menu HOME senza aver installato boot9strap, e dovrai avviare "Impostazioni della console" per poi ricominciare dal passo 6 della Sezione IV 1. Premi (A), quindi premi START e SELECT contemporaneamente per avviare il processo 1. Al termine lo schermo inferiore presenterà la scritta "done.". Esci da b9sTool, quindi spegni la console + Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione + Se la console dovesse spegnersi quando provi ad accenderla, assicurati di aver copiato il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD - + Se vedi la schermata di configurazione di Luma, premi (Start) per riavviare la console, quindi continua con la guida + + Se vedi la schermata di Configurazione Luma, spegni la tua console e procedi alla sezione successiva -#### Sezione VI - Verifica di Luma3DS +#### Sezione VI - Configurazione di Luma3DS -A causa della natura dell'exploit utilizzato, è, seppur raramente, possibile che boot9strap non venga effettivamente installato. Questa sezione verificherà quindi che boot9strap sia stato installato con successo verificando la presenza di file generati automaticamente da Luma3DS. - -1. Spegni il tuo 3DS -1. Inserisci la scheda SD nel tuo computer -1. Assicurati che esista una cartella `luma` e che all'interno ci sia il file `config.ini` - + La presenza di queste cartelle e file conferma che Luma3DS è stato installato - + Se non trovi la cartella `luma` o il file `config.ini`, [segui questa guida per risolvere il problema](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Premi (Select) e accendi la console continuando a tenerlo premuto. Verrà avviata la configurazione di Luma3DS + + Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug + + Ai fini di questa guida, queste impostazioni rimarranno sui valori predefiniti + + Se viene avviato il menu HOME [segui questa guida per risolvere il problema](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Premi (Start) per salvare e riavviare il 3DS A questo punto, la console avvierà sempre Luma3DS. + Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware. diff --git a/_pages/it_IT/installing-boot9strap-(hardmod).txt b/_pages/it_IT/installing-boot9strap-(hardmod).txt index 9ee2e7f422..6adb787435 100644 --- a/_pages/it_IT/installing-boot9strap-(hardmod).txt +++ b/_pages/it_IT/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In questa sezione installerai il custom firmware sulla NAND scaricata, dopodich 1. Scollega la tua hardmod 1. Accendi la console 1. La tua console dovrebbe avviarsi all'interno del menu di configurazione di Luma3DS + + Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug + + Ai fini di questa guida, queste impostazioni rimarranno sui valori predefiniti + Se la console dovesse spegnersi quando provi ad accenderla, assicurati di aver copiato il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD 1. Premi (Start) per salvare e riavviare il 3DS + Se ottieni un errore, continua comunque alla pagina successiva diff --git a/_pages/it_IT/installing-boot9strap-(hbl-usm).txt b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt index 1a5603343c..845f706db2 100644 --- a/_pages/it_IT/installing-boot9strap-(hbl-usm).txt +++ b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In questa sezione installerai il custom firmware nella tua console. + Se la schermata superiore è vuota, spegni la tua console e ripeti la Sezione III 1. Una volta completato il processo, premi (A) per riavviare la tua console 1. La tua console dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS + + Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug + + Ai fini di questa guida, queste impostazioni rimarranno sui valori predefiniti + Se la console dovesse spegnersi quando provi ad accenderla, assicurati di aver copiato il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD 1. Premi (Start) per salvare e riavviare il 3DS diff --git a/_pages/it_IT/installing-boot9strap-(kartdlphax).txt b/_pages/it_IT/installing-boot9strap-(kartdlphax).txt index bb87d13b0c..cbaad9ac0d 100644 --- a/_pages/it_IT/installing-boot9strap-(kartdlphax).txt +++ b/_pages/it_IT/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In questa sezione installerai il custom firmware nella tua console. 1. Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap + Se la schermata superiore è vuota, spegni la tua console e ripeti la Sezione III 1. Una volta completato il processo, premi (A) per riavviare la tua console -1. La tua console dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS +1. Il tuo 3DS di destinazione dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS + + Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug + + Ai fini di questa guida, queste impostazioni rimarranno sui valori predefiniti + Se la console dovesse spegnersi quando provi ad accenderla, assicurati di aver copiato il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD 1. Premi (Start) per salvare e riavviare il 3DS diff --git a/_pages/it_IT/installing-boot9strap-(ntrboot).txt b/_pages/it_IT/installing-boot9strap-(ntrboot).txt index bcd462890f..6e4a8063e2 100644 --- a/_pages/it_IT/installing-boot9strap-(ntrboot).txt +++ b/_pages/it_IT/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest 1. Reinserisci la scheda SD nella tua console 1. Accendi la console 1. La tua console dovrebbe avviarsi all'interno del menu di configurazione di Luma3DS + + Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug + + Ai fini di questa guida, queste impostazioni rimarranno sui valori predefiniti + Se la console dovesse spegnersi quando provi ad accenderla, assicurati di aver copiato il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD 1. Premi (Start) per salvare e riavviare il 3DS + Se ottieni un errore, continua comunque alla pagina successiva diff --git a/_pages/it_IT/installing-boot9strap-(soundhax).txt b/_pages/it_IT/installing-boot9strap-(soundhax).txt index bdc802f788..197372ebc6 100644 --- a/_pages/it_IT/installing-boot9strap-(soundhax).txt +++ b/_pages/it_IT/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In questa sezione installerai il custom firmware nella tua console. 1. Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap 1. Una volta completato il processo, premi (A) per riavviare la tua console 1. La tua console dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS + + Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug + + Ai fini di questa guida, queste impostazioni rimarranno sui valori predefiniti + Se la console dovesse spegnersi quando provi ad accenderla, assicurati di aver copiato il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD 1. Premi (Start) per salvare e riavviare il 3DS + Se ottieni un errore, continua comunque alla pagina successiva diff --git a/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt b/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt index 9b2d6aea68..e24d5098d6 100644 --- a/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt +++ b/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt @@ -67,7 +67,7 @@ In questa sezione visiterai la pagina web dell'exploit del browser, che userà u 1. Tocca il pulsante Codice QR e scansiona [questo codice QR](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + Se ottieni un errore, [segui questa guida per risolvere il problema](troubleshooting#installing-boot9strap-ssloth-browser) + Se visualizzi un avviso riguardo un certificato di sicurezza, premi (A) per consentire la connessione -1. Tap the "PROCEED TO HAXX" button +1. Tocca il pulsante "PROCEED TO HAXX" 1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller #### Sezione IV - Installazione di boot9strap diff --git a/_pages/it_IT/installing-boot9strap-(usm).txt b/_pages/it_IT/installing-boot9strap-(usm).txt index a5520297c5..8ef239986e 100644 --- a/_pages/it_IT/installing-boot9strap-(usm).txt +++ b/_pages/it_IT/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In questa sezione installerai il custom firmware nella tua console. + Se la schermata superiore è vuota, spegni la tua console e ripeti la Sezione III 1. Una volta completato il processo, premi (A) per riavviare la tua console 1. La tua console dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS + + Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug + + Ai fini di questa guida, queste impostazioni rimarranno sui valori predefiniti + Se la console dovesse spegnersi quando provi ad accenderla, assicurati di aver copiato il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD 1. Premi (Start) per salvare e riavviare il 3DS diff --git a/_pages/it_IT/troubleshooting.txt b/_pages/it_IT/troubleshooting.txt index 7aebe0a4d5..236c8099b7 100644 --- a/_pages/it_IT/troubleshooting.txt +++ b/_pages/it_IT/troubleshooting.txt @@ -70,7 +70,7 @@ Il sito ha stabilito che il tuo file `movable.sed` non può essere decriptato. A I tuoi file `00000001.sav` e/o `otherapp.bin` potrebbero essere mal posizionati. Assicurati che il file `00000001.sav` sia in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` e che il file `otherapp.bin` sia nella directory principale della tua scheda SD. -Se i tuoi file sono nelle posizioni corrette, ricrea il salvataggio usando [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), poi posizionalo in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Assicurati che il file sia chiamato esattamente `00000001.sav` e che tu abbia usato il file `movable.sed` della tua console per crearlo. Riscarica l'ultima versione di [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) e posizionala nella directory principale della tua scheda SD. Non aggiungere l'estensione `.bin` se non la vedi presente. +Se i tuoi file sono nelle posizioni corrette, ricrea il salvataggio usando [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), poi posizionalo in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Assicurati che il file sia chiamato esattamente `00000001.sav` e che tu abbia usato il file `movable.sed` della tua console per crearlo. Scarica nuovamente l'ultima versione di [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), posiziona il file `.bin` file pertinente alla tua console dalla cartella `otherapps_with_CfgS` nella directory principale della tua scheda SD e rinominalo in `otherapp.bin`. Non aggiungere l'estensione `.bin` se non la vedi presente. ### "An exception occurred" o Errdisp durante l'avvio di Picross diff --git a/_pages/it_IT/updating-b9s.txt b/_pages/it_IT/updating-b9s.txt index b55c10d3dc..826c48ece8 100644 --- a/_pages/it_IT/updating-b9s.txt +++ b/_pages/it_IT/updating-b9s.txt @@ -51,6 +51,8 @@ Se durante questa sezione ti verrà chiesto di sovrascrivere dei file sulla tua 1. Reinserisci la scheda SD nella tua console 1. Accendi la console 1. Se la tua console si è avviata nel menu di configurazione di Luma3DS, premi (Start) per salvare e riavviare + + Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug + + Ai fini di questa guida, queste impostazioni rimarranno sui valori predefiniti ___ diff --git a/_pages/ja_JP/a9lh-to-b9s.txt b/_pages/ja_JP/a9lh-to-b9s.txt index 36f404ca45..28d155838b 100644 --- a/_pages/ja_JP/a9lh-to-b9s.txt +++ b/_pages/ja_JP/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 1. Once it is complete, press (A) to reboot your device 1. デバイスはLuma3DS設定メニューに再起動します + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. (Start) を押してセーブして再起動します diff --git a/_pages/ja_JP/bannerbomb3-fredtool-(twn).txt b/_pages/ja_JP/bannerbomb3-fredtool-(twn).txt index 8527172194..a433fe42aa 100644 --- a/_pages/ja_JP/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ja_JP/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you see a configuration menu, you already have CFW, and continuing with these 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + 電源ボタンを長押しして強制的に電源を切る必要があるかもしれません + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. 本体の電源を切ります。 -1. パソコンにSDカードを入れます -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. (Start) を押してセーブして再起動します #### Section VII - Restoring DS Download Play diff --git a/_pages/ja_JP/faq.txt b/_pages/ja_JP/faq.txt index 95fc54f083..0bfff15083 100644 --- a/_pages/ja_JP/faq.txt +++ b/_pages/ja_JP/faq.txt @@ -4,11 +4,10 @@ title: "よくある質問" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ja_JP/home.txt b/_pages/ja_JP/home.txt index 11475b3366..82a88a68d7 100644 --- a/_pages/ja_JP/home.txt +++ b/_pages/ja_JP/home.txt @@ -9,16 +9,6 @@ header: 抜粋: "3DSのCFW導入ガイド
公式ファームウェアからboot9strapまで。
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- 作業に移る前にガイドの全てのページ(このページも含む) をしっかりと読んでください。 {: .notice--info} diff --git a/_pages/ja_JP/installing-boot9strap-(fredtool).txt b/_pages/ja_JP/installing-boot9strap-(fredtool).txt index dd9d7f0635..b252dfdddd 100644 --- a/_pages/ja_JP/installing-boot9strap-(fredtool).txt +++ b/_pages/ja_JP/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. 完了し、下の画面に「完了(done)」と表示されたら、b9sToolを終了し、デバイスの電源を切ってください + 電源ボタンを長押しして強制的に電源を切る必要があるかもしれません + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. 本体の電源を切ります。 -1. パソコンにSDカードを入れます -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. (Start) を押してセーブして再起動します At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/ja_JP/installing-boot9strap-(hardmod).txt b/_pages/ja_JP/installing-boot9strap-(hardmod).txt index e297fb8a8c..de33425c18 100644 --- a/_pages/ja_JP/installing-boot9strap-(hardmod).txt +++ b/_pages/ja_JP/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. hardmodの接続を解除 1. デバイスの電源を入れます 1. お使いのデバイスはLuma3DS設定メニューを起動しているはずです + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. (Start) を押してセーブして再起動します + If you get an error, just continue to the next page diff --git a/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt b/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt index 834c33a516..078bda355c 100644 --- a/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. デバイスはLuma3DS設定メニューに再起動します + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. (Start) を押してセーブして再起動します diff --git a/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt b/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt index c4a3f01429..3cc854d7af 100644 --- a/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. デバイスはLuma3DS設定メニューに再起動します +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. (Start) を押してセーブして再起動します diff --git a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt index 90e7683259..422a209e9e 100644 --- a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt +++ b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. 再度、SDカードを本体に挿入してください。 1. デバイスの電源を入れます 1. お使いのデバイスはLuma3DS設定メニューを起動しているはずです + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. (Start) を押してセーブして再起動します + If you get an error, just continue to the next page diff --git a/_pages/ja_JP/installing-boot9strap-(soundhax).txt b/_pages/ja_JP/installing-boot9strap-(soundhax).txt index da96702fd4..3276e16b5f 100644 --- a/_pages/ja_JP/installing-boot9strap-(soundhax).txt +++ b/_pages/ja_JP/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. デバイスはLuma3DS設定メニューに再起動します + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. (Start) を押してセーブして再起動します + If you get an error, just continue to the next page diff --git a/_pages/ja_JP/installing-boot9strap-(usm).txt b/_pages/ja_JP/installing-boot9strap-(usm).txt index b371e556f5..9db6afe947 100644 --- a/_pages/ja_JP/installing-boot9strap-(usm).txt +++ b/_pages/ja_JP/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. デバイスはLuma3DS設定メニューに再起動します + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. (Start) を押してセーブして再起動します diff --git a/_pages/ja_JP/troubleshooting.txt b/_pages/ja_JP/troubleshooting.txt index 5f1968bc53..9983a9e61e 100644 --- a/_pages/ja_JP/troubleshooting.txt +++ b/_pages/ja_JP/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross @@ -411,7 +411,7 @@ This can occur after a CTRTransfer or region change on Old 3DS / 2DS. You will n ### Clear HOME Menu extdata -1. 本体の電源を切ります。 +1. デバイスの電源を切ります 1. パソコンにSDカードを入れます 1. Navigate to the `/Nintendo 3DS///extdata/00000000/` folder on your SD card 1. Delete the corresponding folder for your 3DS region: diff --git a/_pages/ja_JP/updating-b9s.txt b/_pages/ja_JP/updating-b9s.txt index d0b7ffe53b..949fc2c5bb 100644 --- a/_pages/ja_JP/updating-b9s.txt +++ b/_pages/ja_JP/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. 再度、SDカードを本体に挿入してください。 1. デバイスの電源を入れます 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/ko_KR/a9lh-to-b9s.txt b/_pages/ko_KR/a9lh-to-b9s.txt index e2c1fe236c..30c6a20fd3 100644 --- a/_pages/ko_KR/a9lh-to-b9s.txt +++ b/_pages/ko_KR/a9lh-to-b9s.txt @@ -64,6 +64,8 @@ title: A9LH를 B9S로 업데이트 1. 메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요 1. 작업이 완료되면, (A) 를 눌려 기기를 재부팅해 주세요 1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 + + Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다 + + 이 가이드에서는 기본 설정으로 남길 겁니다 + 검은 화면이 보인다면 이 [문제 해결 가이드](troubleshooting#boot-related-issues-on-modded-devices) 를 참고해 주세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 diff --git a/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt b/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt index 35c8f8fb95..f4a9192c91 100644 --- a/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ title: "BannerBomb3 + Fredtool (타이완)" DSiWare 백업이 있으면, DS 다운로드 플레이에 취약한 DSiWare 타이틀을 주입할 수 있게 되어, 이를 이용해서 커스텀 펌웨어를 설치할 수 있습니다. -이 페이지는 **타이완 콘솔만**에 해당됩니다! (시스템 버전 마지막에 T가 붙음, 예: 11.16.0-39T) 만약 다른 지역의 콘솔을 갖고 계시다면, [다른 방법을 선택해 주세요](seedminer#next-steps). +이 페이지는 **타이완 콘솔만**에 해당됩니다! (시스템 버전 마지막에 T가 붙음, 예: 11.16.0-39T) 만약 다른 지역의 콘솔을 갖고 계시다면, [다른 방법을 선택해 주세요](bannerbomb3). {: .notice--warning} ### 준비물 @@ -132,19 +132,15 @@ DSiWare 백업이 있으면, DS 다운로드 플레이에 취약한 DSiWare 타 1. 완료되고 아래 화면에 "done."이라고 표시되면, b9sTool를 종료하고 기기의 전원을 꺼 주세요 + 전원버튼을 계속 눌러 강제종료를 해야 할 수도 있습니다 + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD 카드의 루트로 복사 했는지 확인해 주세요 - + Luma Configuration 화면이 표시된다면, Start 버튼을 눌러 다시 시작해, 이 가이드를 계속 따라와 주세요 + + 만약 Luma3DS 구성 메뉴가 표시되면, 기기의 전원을 끄고 다음 섹션으로 넘어가 주세요 -#### 섹션 VI - Luma3DS 검증 +#### 섹션 VI - Luma3DS 구성 -1. 기기를 종료해 주세요 -1. SD 카드를 컴퓨터에 삽입해 주세요 -1. `luma` 폴더가 있고, 안에 `config.ini` 파일이 있는지 확인해 주세요 - + 해당 폴더와 파일이 모두 있는 것은 Luma3DS가 정상적으로 설치됨을 검증하는 것입니다 - + `luma` 폴더나 `config.ini` 파일이 보이지 않는다면, [이 문제 해결 가이드(영어)](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)를 참고해 주시기 바랍니다 - -이제 기기는 Luma3DS를 기본으로 부팅 됩니다. - + Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다. - + 다음 페이지에서는 커펌에 유용한 홈브류를 설치해 기기 준비를 완료할 것 입니다. +1. (Select) 를 길게 누르고, 이 상태에서 전원을 켜 주세요. Luma3DS 구성 메뉴가 실행 될 겁니다 + + Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다 + + 이 가이드에서는 기본 설정으로 남길 겁니다 + + 만약 HOME 메뉴가 표시되면, [이 문제 해결 가이드 (영어)](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)를 참고해 주시기 바랍니다 +1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 #### 섹션 VII - DS 다운로드 플레이 복구 diff --git a/_pages/ko_KR/faq.txt b/_pages/ko_KR/faq.txt index ac5a90e3b0..666d0bca5f 100644 --- a/_pages/ko_KR/faq.txt +++ b/_pages/ko_KR/faq.txt @@ -4,11 +4,10 @@ title: "자주 묻는 질문" {% include toc title="목차" %} {% capture notice-6 %} -**3DS 펌웨어 11.16.0이 최근 출시되었습니다**. 다음 사항을 참고해 주세요. +**최신 3DS 펌웨어 버전은 11.16.0입니다**. 다음 사항을 참고해 주세요. 만약 기기가 *Luma 11.0*을 사용하고 있다면, 업데이트 해도 *100% 안전합니다*. 기기를 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다. - 만약 기기가 오래된 Luma를 사용하고 있다면, 기기를 11.16.0으로 업데이트하기 전에 [CFW 복구 / 업데이트](restoring-updating-cfw)를 해야 합니다. -- 만약 기기에 커스텀 펌웨어가 설치되어 있지 않다면, 이 버전에서도 여전히 추가적인 장치 없이 설치가 가능하지만 권장 방식이 변경되었습니다. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ko_KR/home.txt b/_pages/ko_KR/home.txt index 146feabfcf..07b13ebef5 100644 --- a/_pages/ko_KR/home.txt +++ b/_pages/ko_KR/home.txt @@ -9,16 +9,6 @@ header: excerpt: "3DS 커스텀 펌웨어 완벽 가이드,
순정에서 boot9strap까지.
" --- -{% capture notice-6 %} -**3DS 펌웨어 11.16.0이 최근 출시되었습니다**. 다음 사항을 참고해 주세요. - -만약 기기가 *Luma 11.0*을 사용하고 있다면, 업데이트 해도 *100% 안전합니다*. 기기를 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다. -- 만약 기기가 오래된 Luma를 사용하고 있다면, 기기를 11.16.0으로 업데이트하기 전에 [CFW 복구 / 업데이트](restoring-updating-cfw)를 해야 합니다. -- 만약 기기에 커스텀 펌웨어가 설치되어 있지 않다면, 이 버전에서도 여전히 추가적인 장치 없이 설치가 가능하지만 권장 방식이 변경되었습니다. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- 진행하기 전에 모든 소개 페이지(이 페이지 포함) 를 철저히 읽어 주세요. {: .notice--info} diff --git a/_pages/ko_KR/installing-boot9strap-(fredtool).txt b/_pages/ko_KR/installing-boot9strap-(fredtool).txt index c9990ead13..93693c2e88 100644 --- a/_pages/ko_KR/installing-boot9strap-(fredtool).txt +++ b/_pages/ko_KR/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ title: "boot9strap 설치 (Fredtool)" 1. 완료되고 아래 화면에 "done."이라고 표시되면, b9sTool를 종료하고 기기의 전원을 꺼 주세요 + 전원버튼을 계속 눌러 강제종료를 해야 할 수도 있습니다 + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD카드의 루트로 복사 했는지 확인하세요 - + Luma Configuration 화면이 표시된다면, Start 버튼을 눌러 다시 시작해, 이 가이드를 계속 따라와 주세요 + + 만약 Luma3DS 구성 메뉴가 표시되면, 기기의 전원을 끄고 다음 섹션으로 넘어가 주세요 -#### 섹션 VI - Luma3DS 검증 +#### 섹션 VI - Luma3DS 구성 -가끔식, 사용된 취약점의 디자인 때문에 boot9strap이 설치가 않될수가 있습니다. 그래서 이 섹션에서는 Luma3DS가 자동으로 생성한 파일들이 있는지 확인합니다. 만약 그렇다면 boot9strap 설치가 되었다는 의미입니다. - -1. 기기를 종료해 주세요 -1. SD 카드를 컴퓨터에 삽입해 주세요 -1. `luma` 폴더가 있고, 안에 `config.ini` 파일이 있는지 확인해 주세요 - + 해당 폴더와 파일이 모두 있는 것은 Luma3DS가 정상적으로 설치됨을 검증하는 것입니다 - + 만약 `luma` 폴더 또는 `config.ini`가 안 보이면, [이 문제 해결 가이드 (영어)](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)를 참고해 주시기 바랍니다 +1. (Select) 를 길게 누르고, 이 상태에서 전원을 켜 주세요. Luma3DS 구성 메뉴가 실행 될 겁니다 + + Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다 + + 이 가이드에서는 기본 설정으로 남길 겁니다 + + 만약 HOME 메뉴가 표시되면, [이 문제 해결 가이드 (영어)](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)를 참고해 주시기 바랍니다 +1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 이제 기기는 Luma3DS를 기본으로 부팅 됩니다. + Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다. diff --git a/_pages/ko_KR/installing-boot9strap-(hardmod).txt b/_pages/ko_KR/installing-boot9strap-(hardmod).txt index c29e918edb..f3ecd1f9a8 100644 --- a/_pages/ko_KR/installing-boot9strap-(hardmod).txt +++ b/_pages/ko_KR/installing-boot9strap-(hardmod).txt @@ -95,6 +95,8 @@ title: "boot9strap 설치 (하드모드)" 1. 하드모드를 연결 해제 해 주세요 1. 기기를 시작해 주세요 1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 + + Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다 + + 이 가이드에서는 기본 설정으로 남길 겁니다 + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD카드의 루트로 복사 했는지 확인하세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 + 만약 오류가 나더라도 그냥 다음으로 넘어가 주세요 diff --git a/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt b/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt index 43aa7277b5..08462d9d51 100644 --- a/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ title: "boot9strap 설치 (HBL-USM)" + 만약 위 화면에 반응이 없다면, 기기의 전원을 꺼 주시고 섹션 III를 다시 시도해 주세요 1. 작업이 완료되면, (A) 를 눌려 기기를 재부팅해 주세요 1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 + + Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다 + + 이 가이드에서는 기본 설정으로 남길 겁니다 + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD 카드의 루트로 복사 했는지 확인해 주세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 diff --git a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt index edf5100385..f269803227 100644 --- a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ title: "boot9strap 설치 (kartdlphax)" 1. 메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요 + 만약 위 화면에 반응이 없다면, 기기의 전원을 꺼 주시고 섹션 III를 다시 시도해 주세요 1. 작업이 완료되면, (A) 를 눌려 기기를 재부팅해 주세요 -1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 +1. 타겟 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 + + Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다 + + 이 가이드에서는 기본 설정으로 남길 겁니다 + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD 카드의 루트로 복사 했는지 확인해 주세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 diff --git a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt index 6ccf0e9316..f997c4ed7b 100644 --- a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt +++ b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt @@ -64,6 +64,8 @@ title: "boot9strap 설치 (ntrboot)" 1. SD 카드를 기기에 다시 삽입해 주세요 1. 기기를 시작해 주세요 1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 + + Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다 + + 이 가이드에서는 기본 설정으로 남길 겁니다 + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD 카드의 루트로 복사 했는지 확인해 주세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 + 만약 오류가 나더라도 그냥 다음으로 넘어가 주세요 diff --git a/_pages/ko_KR/installing-boot9strap-(soundhax).txt b/_pages/ko_KR/installing-boot9strap-(soundhax).txt index 2ab9acba75..18afd28117 100644 --- a/_pages/ko_KR/installing-boot9strap-(soundhax).txt +++ b/_pages/ko_KR/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ Soundhax는 (universal-otherapp과 사용할 때) 모든 지역의 1.0.0 이상 1. 메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요 1. 작업이 완료되면, (A) 를 눌려 기기를 재부팅해 주세요 1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 + + Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다 + + 이 가이드에서는 기본 설정으로 남길 겁니다 + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD카드의 루트로 복사 했는지 확인하세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 + 만약 오류가 나더라도 그냥 다음으로 넘어가 주세요 diff --git a/_pages/ko_KR/installing-boot9strap-(usm).txt b/_pages/ko_KR/installing-boot9strap-(usm).txt index 8d19a5bfec..0676423b55 100644 --- a/_pages/ko_KR/installing-boot9strap-(usm).txt +++ b/_pages/ko_KR/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ title: "boot9strap 설치 (USM)" + 만약 위 화면에 반응이 없다면, 기기의 전원을 꺼 주시고 섹션 III를 다시 시도해 주세요 1. 작업이 완료되면, (A) 를 눌려 기기를 재부팅해 주세요 1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다 + + Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다 + + 이 가이드에서는 기본 설정으로 남길 겁니다 + 만약 기기가 부팅시에 꺼진다면 Luma3DS `.zip` 파일 안에 압축 되있는 `boot.firm`을 SD 카드의 루트로 복사 했는지 확인하세요 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요 diff --git a/_pages/ko_KR/troubleshooting.txt b/_pages/ko_KR/troubleshooting.txt index 354d32f4ec..6382f19084 100644 --- a/_pages/ko_KR/troubleshooting.txt +++ b/_pages/ko_KR/troubleshooting.txt @@ -70,7 +70,7 @@ title: "문제 해결" `00000001.sav` 또는 `otherapp.bin` 파일이 잘못 들어갔습니다. `00000000.sav`가 `Nintendo 3DS` -> `` -> `` -> `title` -> `00004000` -> 0017c100` -> `data` 안에 있고 `otherapp.bin`이 SD카드 최상위 디렉토리에 있는지 다시 한 번 확인해주세요. -만약 위치가 정확하다면, [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx)을 이용해 세이브를 다시 생성한 후, `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` 폴더 안에 다시 복사해주세요. 반드시 파일의 이름이 `00000001.sav`이고 기기의 `movable.sed`를 이용해야 합니다. 최신 버전의 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)을 다시 내려받아 SD 카드의 최상위 디렉토리에 복사해주세요. `.bin` 확장자는 보이지 않는 이상 추가하지 말아 주세요. +만약 위치가 정확하다면, [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx)을 이용해 세이브를 다시 생성한 후, `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` 폴더 안에 다시 복사해주세요. 반드시 파일의 이름이 `00000001.sav`이고 기기의 `movable.sed`를 이용해야 합니다. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. `.bin` 확장자는 보이지 않는 이상 추가하지 말아 주세요. ### Picross 열을 시 "An exception occurred" or Errdisp diff --git a/_pages/ko_KR/updating-b9s.txt b/_pages/ko_KR/updating-b9s.txt index 03f91c4cb0..4b0597aa2d 100644 --- a/_pages/ko_KR/updating-b9s.txt +++ b/_pages/ko_KR/updating-b9s.txt @@ -51,6 +51,8 @@ title: "B9S 업데이트" 1. SD 카드를 기기에 다시 삽입해 주세요 1. 기기를 시작해 주세요 1. 만약 Luma3DS 설정 메뉴로 부팅되었다면, (Start)를 눌러서 저장/리부트해 주세요 + + Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다 + + 이 가이드에서는 기본 설정으로 남길 겁니다 ___ diff --git a/_pages/ms_MY/a9lh-to-b9s.txt b/_pages/ms_MY/a9lh-to-b9s.txt index a0082cec70..7af3eacb5a 100644 --- a/_pages/ms_MY/a9lh-to-b9s.txt +++ b/_pages/ms_MY/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Tekan (Start) untuk save dan reboot diff --git a/_pages/ms_MY/bannerbomb3-fredtool-(twn).txt b/_pages/ms_MY/bannerbomb3-fredtool-(twn).txt index ac10712a42..ac473de1e0 100644 --- a/_pages/ms_MY/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ms_MY/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Pasang kad SD anda ke dalam komputer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Tekan (Start) untuk save dan reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/ms_MY/faq.txt b/_pages/ms_MY/faq.txt index c8e364f4f2..7e52f58186 100644 --- a/_pages/ms_MY/faq.txt +++ b/_pages/ms_MY/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ms_MY/home.txt b/_pages/ms_MY/home.txt index 20054e084c..a1af926888 100644 --- a/_pages/ms_MY/home.txt +++ b/_pages/ms_MY/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/ms_MY/installing-boot9strap-(fredtool).txt b/_pages/ms_MY/installing-boot9strap-(fredtool).txt index 6a58015210..021b023546 100644 --- a/_pages/ms_MY/installing-boot9strap-(fredtool).txt +++ b/_pages/ms_MY/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Pasang kad SD anda ke dalam komputer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Tekan (Start) untuk save dan reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/ms_MY/installing-boot9strap-(hardmod).txt b/_pages/ms_MY/installing-boot9strap-(hardmod).txt index 298ffe118d..5f010a00a9 100644 --- a/_pages/ms_MY/installing-boot9strap-(hardmod).txt +++ b/_pages/ms_MY/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Tekan (Start) untuk save dan reboot + If you get an error, just continue to the next page diff --git a/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt b/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt index bd2dbb653e..592590bca3 100644 --- a/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Tekan (Start) untuk save dan reboot diff --git a/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt b/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt index 3134b024bb..bcd398f0ac 100644 --- a/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Tekan (Start) untuk save dan reboot diff --git a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt index 8708272fce..32746847f7 100644 --- a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt +++ b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Tekan (Start) untuk save dan reboot + If you get an error, just continue to the next page diff --git a/_pages/ms_MY/installing-boot9strap-(soundhax).txt b/_pages/ms_MY/installing-boot9strap-(soundhax).txt index b1521480a4..67704e5aeb 100644 --- a/_pages/ms_MY/installing-boot9strap-(soundhax).txt +++ b/_pages/ms_MY/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Tekan (Start) untuk save dan reboot + If you get an error, just continue to the next page diff --git a/_pages/ms_MY/installing-boot9strap-(usm).txt b/_pages/ms_MY/installing-boot9strap-(usm).txt index 1bb0d38b63..936c803d35 100644 --- a/_pages/ms_MY/installing-boot9strap-(usm).txt +++ b/_pages/ms_MY/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Tekan (Start) untuk save dan reboot diff --git a/_pages/ms_MY/troubleshooting.txt b/_pages/ms_MY/troubleshooting.txt index d793c531c1..bea4d5eb22 100644 --- a/_pages/ms_MY/troubleshooting.txt +++ b/_pages/ms_MY/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/ms_MY/updating-b9s.txt b/_pages/ms_MY/updating-b9s.txt index 35ac5c7180..29e2977f4d 100644 --- a/_pages/ms_MY/updating-b9s.txt +++ b/_pages/ms_MY/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/nl_NL/a9lh-to-b9s.txt b/_pages/nl_NL/a9lh-to-b9s.txt index 13ae9e1816..61c5196ca3 100644 --- a/_pages/nl_NL/a9lh-to-b9s.txt +++ b/_pages/nl_NL/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ Voor alle stappen in dit gedeelte, moet je de bestaande bestanden op je SD-kaart 1. Wanneer erom gevraagd word druk je de juiste knoppen in om boot9strap te installeren 1. Zodra het voltooid is, druk op (A) om je apparaat opnieuw op te starten 1. Je apparaat zou opnieuw moeten opgestart zijn naar het configuratiemenu van Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Als je een zwart scherm krijgt, [volg dan deze handleiding voor probleemoplossingen](troubleshooting#boot-related-issues-on-modded-devices) 1. Druk op (Start) om op te slaan en opnieuw op te starten diff --git a/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt b/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt index 49e4f953e0..17bedacde0 100644 --- a/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt +++ b/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ Om dit te bereiken, gebruiken we de encryptiesleutel van je systeem (movable.sed Zodra je een DSiWare back-up hebt, kan een exploiteerbare DSiWare titel worden geïnjecteerd in DS Download Play, dat gebruikt kan worden om custom firmware te installeren. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! Als je console uit een andere regio komt, [kies dan een andere methode](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### Wat je nodig hebt @@ -132,19 +132,15 @@ Als je liever een visuele handleiding hebt in dit deel, is er [hier](https://zoo 1. Wanneer voltooid en het onderste scherm "done." toont, sluit dan b9sTool en schakel je 3DS uit + Mogelijk moet je de power knop een tijdje inhouden om zo je console uit te zetten + Als je apparaat afsluit als je het probeert aan te zetten, zorg er dan voor dat je `boot.firm` hebt gekopieerd van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart - + Als u het Luma configuratiescherm ziet, druk op (Start) om opnieuw op te starten en ga dan verder met de handleiding + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Deel VI - Luma3DS verificatie +#### Section VI - Luma3DS Configuration -1. Schakel je 3DS uit -1. Plaats je SD kaart in je computer -1. Controleer dat een `luma` map bestaat en dat `config.ini` erin zit - + Het bestaan van deze mappen en bestanden bevestigt dat Luma3DS is geïnstalleerd - + Als je de `luma` map of `config.ini` niet ziet, [volg dan deze handleiding voor probleemoplossingen](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -Op dit moment zal je console standaard opstarten naar Luma3DS. - + Luma3DS ziet er niet anders uit dan het normale HOME Menu. Als je console in het HOME Menu is opgestart, gebruikt hij custom firmware. - + Op de volgende pagina zal je handige homebrew applicaties installeren om je installatie te voltooien. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Druk op (Start) om op te slaan en opnieuw op te starten #### Deel VII - DS Download Play herstellen diff --git a/_pages/nl_NL/faq.txt b/_pages/nl_NL/faq.txt index 1f38061e37..f7567a798c 100644 --- a/_pages/nl_NL/faq.txt +++ b/_pages/nl_NL/faq.txt @@ -4,11 +4,10 @@ title: "Veelgestelde vragen" {% include toc title="Inhoudsopgave"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Dit is wat je moet weten: +**The latest 3DS firmware is 11.16.0**. Dit is wat je moet weten: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/nl_NL/home.txt b/_pages/nl_NL/home.txt index f3dd77dfb6..6671219ec0 100644 --- a/_pages/nl_NL/home.txt +++ b/_pages/nl_NL/home.txt @@ -9,16 +9,6 @@ header: excerpt: "Een complete handleiding tot 3DS custom firmware,
van stock tot boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Dit is wat je moet weten: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Neem alle inleidende pagina's (inclusief deze pagina!) grondig door voordat je verdergaat. {: .notice--info} diff --git a/_pages/nl_NL/installing-boot9strap-(fredtool).txt b/_pages/nl_NL/installing-boot9strap-(fredtool).txt index ca337fda9a..a355bda1d9 100644 --- a/_pages/nl_NL/installing-boot9strap-(fredtool).txt +++ b/_pages/nl_NL/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Eenmaal voltooid en het onderste scherm "done" toont, sluit dan b9sTool en schakel je 3DS uit + Mogelijk moet je de power knop een tijdje inhouden om zo je console uit te zetten + Als je apparaat afsluit als je het probeert aan te zetten, zorg er dan voor dat je `boot.firm` hebt gekopieerd van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart - + Als je het Luma configuratiescherm ziet, druk op (Start) om opnieuw op te starten en ga dan verder met de handleiding + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Deel VI - Luma3DS verificatie +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Schakel je 3DS uit -1. Plaats je SD kaart in je computer -1. Controleer dat een `luma` map bestaat en dat `config.ini` erin zit - + Het bestaan van deze mappen en bestanden bevestigt dat Luma3DS is geïnstalleerd - + Als je de `luma` of `config.ini` map niet ziet, [volg dan deze handleiding voor probleemoplossingen](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Druk op (Start) om op te slaan en opnieuw op te starten Op dit moment zal je console standaard opstarten naar Luma3DS. + Luma3DS ziet er niet anders uit dan het normale HOME Menu. Als je console in het HOME Menu is opgestart, gebruikt hij custom firmware. diff --git a/_pages/nl_NL/installing-boot9strap-(hardmod).txt b/_pages/nl_NL/installing-boot9strap-(hardmod).txt index c870e80e70..b29dce67b3 100644 --- a/_pages/nl_NL/installing-boot9strap-(hardmod).txt +++ b/_pages/nl_NL/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Koppel je hardmod los 1. Zet je 3DS aan 1. Je apparaat zou het Luma3DS configuratie scherm moeten laten zien + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Als je apparaat afsluit als je het probeert aan te zetten, zorg er dan voor dat je `boot.firm` hebt gekopieerd van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart 1. Druk op (Start) om op te slaan en opnieuw op te starten + Als je een foutmelding krijgt, ga dan gewoon door naar de volgende pagina diff --git a/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt b/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt index c686525447..640e6c6329 100644 --- a/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt +++ b/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + Als het bovenste scherm leeg is, schakel je apparaat uit en herdoe Deel III 1. Zodra het voltooid is, druk op (A) om je apparaat opnieuw op te starten 1. Je apparaat zou opnieuw moeten opgestart zijn naar het configuratiemenu van Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Als je apparaat afsluit als je het probeert aan te zetten, zorg er dan voor dat je `boot.firm` hebt gekopieerd van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart 1. Druk op (Start) om op te slaan en opnieuw op te starten diff --git a/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt b/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt index 0063bfa634..547010bab8 100644 --- a/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt +++ b/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. Wanneer daarom wordt gevraagd, voer de toetsencombinatie op het bovenste scherm in om boot9strap te installeren + Als het bovenste scherm leeg is, schakel je apparaat uit en herdoe Deel III 1. Zodra het voltooid is, druk op (A) om je apparaat opnieuw op te starten -1. Je apparaat zou opnieuw moeten opgestart zijn naar het configuratiemenu van Luma3DS +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Als je apparaat afsluit als je het probeert aan te zetten, zorg er dan voor dat je `boot.firm` hebt gekopieerd van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart 1. Druk op (Start) om op te slaan en opnieuw op te starten diff --git a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt index e2ef78932b..e25e0e67d4 100644 --- a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt +++ b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ Om de [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links op deze pagin 1. Stop je SD kaart terug in je 3DS 1. Zet je 3DS aan 1. Je apparaat zou het Luma3DS configuratie scherm moeten laten zien + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Als je apparaat afsluit als je het probeert aan te zetten, zorg er dan voor dat je `boot.firm` hebt gekopieerd van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart 1. Druk op (Start) om op te slaan en opnieuw op te starten + Als je een foutmelding krijgt, ga dan gewoon door naar de volgende pagina diff --git a/_pages/nl_NL/installing-boot9strap-(soundhax).txt b/_pages/nl_NL/installing-boot9strap-(soundhax).txt index d206a0ad5c..871001822f 100644 --- a/_pages/nl_NL/installing-boot9strap-(soundhax).txt +++ b/_pages/nl_NL/installing-boot9strap-(soundhax).txt @@ -51,7 +51,7 @@ In this section, you will copy the files needed to trigger both Soundhax and uni In this section, you will launch Soundhax through the Nintendo 3DS Sound app, which will use universal-otherapp to launch the boot9strap (custom firmware) installer. -1. Stop je SD-kaart terug in je 3DS +1. Stop je SD kaart terug in je 3DS 1. Zet je 3DS aan 1. Start Nintendo 3DS Sound @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. Wanneer daarom wordt gevraagd, voer de toetsencombinatie op het bovenste scherm in om boot9strap te installeren 1. Zodra het voltooid is, druk op (A) om je apparaat opnieuw op te starten 1. Je apparaat zou opnieuw moeten opgestart zijn naar het configuratiemenu van Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Als je apparaat afsluit als je het probeert aan te zetten, zorg er dan voor dat je `boot.firm` hebt gekopieerd van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart 1. Druk op (Start) om op te slaan en opnieuw op te starten + Als je een foutmelding krijgt, ga dan gewoon door naar de volgende pagina diff --git a/_pages/nl_NL/installing-boot9strap-(usm).txt b/_pages/nl_NL/installing-boot9strap-(usm).txt index 64ce6b2350..4d1705313d 100644 --- a/_pages/nl_NL/installing-boot9strap-(usm).txt +++ b/_pages/nl_NL/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + Als het bovenste scherm leeg is, schakel je apparaat uit en herdoe Deel III 1. Zodra het voltooid is, druk op (A) om je apparaat opnieuw op te starten 1. Je apparaat zou opnieuw moeten opgestart zijn naar het configuratiemenu van Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + Als je apparaat afsluit als je het probeert aan te zetten, zorg er dan voor dat je `boot.firm` hebt gekopieerd van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart 1. Druk op (Start) om op te slaan en opnieuw op te starten @@ -95,7 +97,7 @@ Op dit moment zal je console standaard opstarten naar Luma3DS. In this section, you will trigger the BannerBomb3 exploit a second time so that you can restore the Wi-Fi connection slots that were overwritten in Section II. -1. Open Systeeminstellingen op je apparaat +1. Open System Settings op je apparaat 1. Navigate to `Data Management` -> `DSiWare`-> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png)) 1. Use the D-Pad to navigate and press the (A) button to select "Uninstall unSAFE_MODE" + Your device will automatically reboot diff --git a/_pages/nl_NL/troubleshooting.txt b/_pages/nl_NL/troubleshooting.txt index 80b6f311bb..3c922da5aa 100644 --- a/_pages/nl_NL/troubleshooting.txt +++ b/_pages/nl_NL/troubleshooting.txt @@ -70,7 +70,7 @@ De website heeft bepaald dat jouw 'movable.sed' niet kan gebruteforced worden. Z Je `00000001.sav` en/of `otherapp.bin` bestanden werden mogelijk op de verkeerde plaats gezet. Zorg ervoor dat `00000001.sav` zich in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` bevindt en dat `otherapp.bin` in de hoofdmap van je SD-kaart zit. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Zorg ervoor dat de bestandsnaam exact `00000001.sav` is en dat je de `movable.sed` van je 3DS hebt gebruikt om het te maken. Download de nieuwste versie van [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) opnieuw en plaats het op de hoofdmap van je SD-kaart. Voeg de `.bin` extensie niet toe als je het nog niet ziet. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Zorg ervoor dat de bestandsnaam exact `00000001.sav` is en dat je de `movable.sed` van je 3DS hebt gebruikt om het te maken. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Voeg de `.bin` extensie niet toe als je het nog niet ziet. ### "An exception occurred" of Errdisp bij het openen van Picross diff --git a/_pages/nl_NL/updating-b9s.txt b/_pages/nl_NL/updating-b9s.txt index df85d1cc84..cf8e5e7626 100644 --- a/_pages/nl_NL/updating-b9s.txt +++ b/_pages/nl_NL/updating-b9s.txt @@ -51,6 +51,8 @@ Voor alle stappen in dit gedeelte, moet je bestaande bestanden op je SD-kaart ov 1. Stop je SD-kaart terug in je 3DS 1. Zet je 3DS aan 1. Als je apparaat het Luma3DS configuratiemenu heeft opgestart, druk op (Start) om op te slaan en te herstarten + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/no_NO/a9lh-to-b9s.txt b/_pages/no_NO/a9lh-to-b9s.txt index a5da4152bf..faa768d947 100644 --- a/_pages/no_NO/a9lh-to-b9s.txt +++ b/_pages/no_NO/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Trykk (Start) for å lagre og starte på nytt diff --git a/_pages/no_NO/bannerbomb3-fredtool-(twn).txt b/_pages/no_NO/bannerbomb3-fredtool-(twn).txt index 05e95d9b08..07cdea9aaf 100644 --- a/_pages/no_NO/bannerbomb3-fredtool-(twn).txt +++ b/_pages/no_NO/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Slå av enheten -1. Sett inn SD-kortet i datamaskinen din -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Trykk (Start) for å lagre og starte på nytt #### Section VII - Restoring DS Download Play diff --git a/_pages/no_NO/faq.txt b/_pages/no_NO/faq.txt index 0b489791fe..7891121f9b 100644 --- a/_pages/no_NO/faq.txt +++ b/_pages/no_NO/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/no_NO/home.txt b/_pages/no_NO/home.txt index 793087cc29..17d8bec672 100644 --- a/_pages/no_NO/home.txt +++ b/_pages/no_NO/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/no_NO/installing-boot9strap-(fredtool).txt b/_pages/no_NO/installing-boot9strap-(fredtool).txt index ab2987a6a3..4193b2c036 100644 --- a/_pages/no_NO/installing-boot9strap-(fredtool).txt +++ b/_pages/no_NO/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Slå av enheten -1. Sett inn SD-kortet i datamaskinen din -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Trykk (Start) for å lagre og starte på nytt At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/no_NO/installing-boot9strap-(hardmod).txt b/_pages/no_NO/installing-boot9strap-(hardmod).txt index f70565a780..96a64d9f54 100644 --- a/_pages/no_NO/installing-boot9strap-(hardmod).txt +++ b/_pages/no_NO/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Trykk (Start) for å lagre og starte på nytt + If you get an error, just continue to the next page diff --git a/_pages/no_NO/installing-boot9strap-(hbl-usm).txt b/_pages/no_NO/installing-boot9strap-(hbl-usm).txt index 251b0fcab9..6523c7d937 100644 --- a/_pages/no_NO/installing-boot9strap-(hbl-usm).txt +++ b/_pages/no_NO/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Trykk (Start) for å lagre og starte på nytt diff --git a/_pages/no_NO/installing-boot9strap-(kartdlphax).txt b/_pages/no_NO/installing-boot9strap-(kartdlphax).txt index cf82ca8b5e..cec19c24f6 100644 --- a/_pages/no_NO/installing-boot9strap-(kartdlphax).txt +++ b/_pages/no_NO/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Trykk (Start) for å lagre og starte på nytt diff --git a/_pages/no_NO/installing-boot9strap-(ntrboot).txt b/_pages/no_NO/installing-boot9strap-(ntrboot).txt index d0f3b8ea9e..f287573516 100644 --- a/_pages/no_NO/installing-boot9strap-(ntrboot).txt +++ b/_pages/no_NO/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Sett inn SD-kortet i konsollen igjen 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Trykk (Start) for å lagre og starte på nytt + If you get an error, just continue to the next page diff --git a/_pages/no_NO/installing-boot9strap-(soundhax).txt b/_pages/no_NO/installing-boot9strap-(soundhax).txt index 0035080b2a..c2282e1185 100644 --- a/_pages/no_NO/installing-boot9strap-(soundhax).txt +++ b/_pages/no_NO/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Trykk (Start) for å lagre og starte på nytt + If you get an error, just continue to the next page diff --git a/_pages/no_NO/installing-boot9strap-(usm).txt b/_pages/no_NO/installing-boot9strap-(usm).txt index b06c1d62fc..91433d9c9f 100644 --- a/_pages/no_NO/installing-boot9strap-(usm).txt +++ b/_pages/no_NO/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Trykk (Start) for å lagre og starte på nytt diff --git a/_pages/no_NO/troubleshooting.txt b/_pages/no_NO/troubleshooting.txt index 4ea441fa41..13d8f49c06 100644 --- a/_pages/no_NO/troubleshooting.txt +++ b/_pages/no_NO/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/no_NO/updating-b9s.txt b/_pages/no_NO/updating-b9s.txt index 1a3e7c4692..7c6ddc422e 100644 --- a/_pages/no_NO/updating-b9s.txt +++ b/_pages/no_NO/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Sett inn SD-kortet i konsollen igjen 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/pl_PL/a9lh-to-b9s.txt b/_pages/pl_PL/a9lh-to-b9s.txt index 237b4e0f14..c6144552ba 100644 --- a/_pages/pl_PL/a9lh-to-b9s.txt +++ b/_pages/pl_PL/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ Wykonując wszystkie kroki opisane w tej sekcji, zastąp istniejące pliki na ka 1. Kiedy zostaniesz poproszony, wprowadź podaną kombinację klawiszy aby zainstalować boot9strap 1. Once it is complete, press (A) to reboot your device 1. Twoje urządzenie powinno uruchomić się ponownie i załadować menu konfiguracji Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie diff --git a/_pages/pl_PL/bannerbomb3-fredtool-(twn).txt b/_pages/pl_PL/bannerbomb3-fredtool-(twn).txt index 8e88a2a82d..d0d45e6b4b 100644 --- a/_pages/pl_PL/bannerbomb3-fredtool-(twn).txt +++ b/_pages/pl_PL/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ Jeśli wolisz skorzystać z obrazkowego poradnika dotyczącego tej sekcji przejd 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + Możliwe, że będziesz musiał wymusić wyłączenie 3DS'a poprzez przytrzymanie przycisku zasilania + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Wyłącz konsolę -1. Włóż kartę SD do komputera -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie #### Section VII - Restoring DS Download Play diff --git a/_pages/pl_PL/faq.txt b/_pages/pl_PL/faq.txt index e295890440..2e5e27447d 100644 --- a/_pages/pl_PL/faq.txt +++ b/_pages/pl_PL/faq.txt @@ -4,11 +4,10 @@ title: "Często zadawane pytania (FAQ)" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/pl_PL/home.txt b/_pages/pl_PL/home.txt index a80df7386d..8ce1888b28 100644 --- a/_pages/pl_PL/home.txt +++ b/_pages/pl_PL/home.txt @@ -9,16 +9,6 @@ header: excerpt: "Kompletna instrukcja instalacji Custom Firmware na konsoli Nintendo 3DS,
od fabrycznej, niezmodyfikowanej wersji do boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Dokładnie przeczytaj wszystkie strony wprowadzające (także tą!) zanim przejdziesz dalej. {: .notice--info} diff --git a/_pages/pl_PL/installing-boot9strap-(fredtool).txt b/_pages/pl_PL/installing-boot9strap-(fredtool).txt index 648c489483..81d3dcb6f2 100644 --- a/_pages/pl_PL/installing-boot9strap-(fredtool).txt +++ b/_pages/pl_PL/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + Możliwe, że będziesz musiał wymusić wyłączenie 3DS'a poprzez przytrzymanie przycisku zasilania + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Wyłącz konsolę -1. Włóż kartę SD do komputera -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/pl_PL/installing-boot9strap-(hardmod).txt b/_pages/pl_PL/installing-boot9strap-(hardmod).txt index 98ed4cea82..24f6e3984a 100644 --- a/_pages/pl_PL/installing-boot9strap-(hardmod).txt +++ b/_pages/pl_PL/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Odłącz hardmoda 1. Włącz konsolę 1. Twoje urządzenie powinno uruchomić się i załadować menu konfiguracji Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie + If you get an error, just continue to the next page diff --git a/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt b/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt index 0d63d4276c..5600754916 100644 --- a/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt +++ b/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Twoje urządzenie powinno uruchomić się ponownie i załadować menu konfiguracji Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie diff --git a/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt b/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt index 0aeadc6e85..af6257f4f2 100644 --- a/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt +++ b/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Twoje urządzenie powinno uruchomić się ponownie i załadować menu konfiguracji Luma3DS +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie diff --git a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt index f5b34ffdee..3268317e0f 100644 --- a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt +++ b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Włóż ponownie kartę SD do konsoli 1. Włącz konsolę 1. Twoje urządzenie powinno uruchomić się i załadować menu konfiguracji Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie + If you get an error, just continue to the next page diff --git a/_pages/pl_PL/installing-boot9strap-(soundhax).txt b/_pages/pl_PL/installing-boot9strap-(soundhax).txt index 03c49efb1f..e318b4218e 100644 --- a/_pages/pl_PL/installing-boot9strap-(soundhax).txt +++ b/_pages/pl_PL/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Twoje urządzenie powinno uruchomić się ponownie i załadować menu konfiguracji Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie + If you get an error, just continue to the next page diff --git a/_pages/pl_PL/installing-boot9strap-(usm).txt b/_pages/pl_PL/installing-boot9strap-(usm).txt index 8c390a8bac..e5bd9eb17c 100644 --- a/_pages/pl_PL/installing-boot9strap-(usm).txt +++ b/_pages/pl_PL/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Twoje urządzenie powinno uruchomić się ponownie i załadować menu konfiguracji Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie diff --git a/_pages/pl_PL/troubleshooting.txt b/_pages/pl_PL/troubleshooting.txt index 7187cfb001..3c5c20b356 100644 --- a/_pages/pl_PL/troubleshooting.txt +++ b/_pages/pl_PL/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/pl_PL/updating-b9s.txt b/_pages/pl_PL/updating-b9s.txt index 6d007332f3..011cf771ed 100644 --- a/_pages/pl_PL/updating-b9s.txt +++ b/_pages/pl_PL/updating-b9s.txt @@ -51,6 +51,8 @@ Wykonując wszystkie kroki opisane w tej sekcji, zastąp istniejące pliki na ka 1. Włóż ponownie kartę SD do konsoli 1. Włącz konsolę 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/pt_BR/a9lh-to-b9s.txt b/_pages/pt_BR/a9lh-to-b9s.txt index 4d59c7c561..e3f4bc8577 100644 --- a/_pages/pt_BR/a9lh-to-b9s.txt +++ b/_pages/pt_BR/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ Para todas as etapas nesta seção, substitua quaisquer arquivos existentes no s 1. Quando solicitado, aperte a sequência de botões apresentada na tela para instalar o boot9strap 1. Quando concluído, aperte (A) para reiniciar o seu dispositivo 1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS + + O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração + + Para a finalidade deste guia, estas configurações serão deixadas nas configurações padrão + Se você obter uma tela preta, [siga este guia de troubleshooting](troubleshooting#boot-related-issues-on-modded-devices) 1. Aperte (Start) para salvar e reiniciar diff --git a/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt b/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt index 8de3dba735..0523950e72 100644 --- a/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ Para fazer isso, usamos a chave de criptografia do seu sistema (movable.sed) par Assim que tiver um backup de DSiWare, um aplicativo exploitable de DSiWare pode ser inserido no DS Download Play, que pode ser usado para instalar um custom firmware. -Essas instruções são APENAS para consoles tailandeses (indicados por um T no final da versão do sistema, ex. 11.16.0-39T)! Se o seu console for de qualquer outra região, [escolha outro método](seedminer#next-steps). +Essas instruções são APENAS para consoles tailandeses (indicados por um T no final da versão do sistema, ex. 11.16.0-39T)! Se o seu console for de qualquer outra região, [escolha o outro método](bannerbomb3). {: .notice--warning} ### O que você precisa @@ -132,19 +132,15 @@ Caso você prefira um guia visual para esta seção, há um disponível [aqui](h 1. Quando for concluído e a tela inferior dizer "done", saia do b9sTool, então desligue o seu dispositivo + Você pode ter que forçar o desligamento segurando o botão power + Se seu dispositivo desligar quando você tentar ligá-lo, certifique-se de que você copiou `boot.firm` do `.zip` do Luma3DS para a raiz do seu cartão SD - + Caso veja a tela de configuração do Luma, aperte (Start) para reiniciar, depois continue com o guia + + Se você ver a tela de configuração do Luma, desligue seu dispositivo e continue para a próxima seção -#### Seção VI - Verificação do Luma3DS +#### Seção VI - Configuração do Luma3DS -1. Desligue seu dispositivo -1. Insira o cartão SD no seu computador -1. Verifique se uma pasta `luma` existe e se `config.ini` está dentro dela - + A existência destas pastas e arquivos confirma que o Luma3DS está instalado - + Se você não vir a pasta `luma` ou `config.ini`, [siga este guia de troubleshooting](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -Neste momento, o seu console iniciará no Luma3DS por padrão. - + O Luma3DS não é diferente do Menu HOME normal. Se seu console foi inicializado no Menu HOME, ele está executando um firmware personalizado. - + Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação. +1. Pressione e segure (Select), enquanto segura (Select), ligue seu dispositivo. Isso iniciará a configuração do Luma3DS + + O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração + + Para a finalidade deste guia, estas configurações serão deixadas nas configurações padrão + + Se você inicializar no Menu HOME, [siga este guia de troubleshooting](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Aperte (Start) para salvar e reiniciar #### Seção VII - Restaurando o DS Download Play diff --git a/_pages/pt_BR/faq.txt b/_pages/pt_BR/faq.txt index 582ac4bfa1..c2b9a6883e 100644 --- a/_pages/pt_BR/faq.txt +++ b/_pages/pt_BR/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Tabela de Conteúdo"%} {% capture notice-6 %} -**A atualização de firmware 11.16.0 foi lançada recentemente**. Veja aqui o que você deve saber: +**O firmware mais recente do 3DS é 11.16.0**. Veja aqui o que você deve saber: - Se o seu dispositivo estiver executando *Luma 11.0*, é *100% seguro* atualizar. Você pode checar sua versão do Luma apertando e segurando (Select) enquanto inicia o console. - Se seu dispositivo estiver em uma versão do Luma mais antiga, você deve [atualizar o Luma](checking-for-cfw) antes de atualizar seu dispositivo para a 11.16.0. -- Se seu dispositivo ainda não tiver custom firmware, você ainda pode instalá-la nesta versão gratuitamente sem qualquer hardware adicional, mas o método recomendado foi alterado. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/pt_BR/finalizing-setup.txt b/_pages/pt_BR/finalizing-setup.txt index 0152bfeb34..59f00607c5 100644 --- a/_pages/pt_BR/finalizing-setup.txt +++ b/_pages/pt_BR/finalizing-setup.txt @@ -73,7 +73,7 @@ Nesta seção, você atualizará seu sistema para a versão mais recente, que é 1. Atualize seu dispositivo indo em Configuração do console, depois "Outras Configurações, depois indo para a direita até o final e selecionando "Atualização" + Atualizações feitas enquanto usa B9S + Luma (o que você tem) são seguras + O atualizador pode exibir uma mensagem dizendo "Seu sistema está atualizado" ao invés de atualizar. Isso é normal se você já está atualizado; continue com a próxima seção - + If this gives you an error, set both your DNS settings and Proxy settings to "auto" + + Se isso lhe der um erro, defina suas configurações de DNS e configurações de Proxy para "auto" + Se isso ainda lhe der um erro, [siga este guia de troubleshooting](troubleshooting#unable-to-update-device) #### Seção III - Homebrew Launcher diff --git a/_pages/pt_BR/get-started.txt b/_pages/pt_BR/get-started.txt index ea886976d8..c020ef4e41 100644 --- a/_pages/pt_BR/get-started.txt +++ b/_pages/pt_BR/get-started.txt @@ -46,12 +46,12 @@ Use a tabela de versões abaixo para selecionar um método. Algumas coisas a con Seedminer - 11.14.0 to 11.15.0 + 11.14.0 até 11.15.0 Atualize seu 3DS para a versão mais recente através da Configuração do Console - 11.4.0 to 11.13.0 - Installing boot9strap (SSLoth-Browser) + 11.4.0 até 11.13.0 + Instalando boot9strap (SSLoth-Browser) 1.0.0 para 11.3.0 diff --git a/_pages/pt_BR/home.txt b/_pages/pt_BR/home.txt index 08b05ee1e8..241255801b 100644 --- a/_pages/pt_BR/home.txt +++ b/_pages/pt_BR/home.txt @@ -9,16 +9,6 @@ header: excerpt: "Um guia completo de Custom Firmware para o 3DS,
de varejo até boot9strap.
" --- -{% capture notice-6 %} -**A atualização de firmware 11.16.0 foi lançada recentemente**. Veja aqui o que você deve saber: - -- Se o seu dispositivo estiver executando *Luma 11.0*, é *100% seguro* atualizar. Você pode checar sua versão do Luma apertando e segurando (Select) enquanto inicia o console. -- Se seu dispositivo estiver em uma versão do Luma mais antiga, você deve [atualizar o Luma](checking-for-cfw) antes de atualizar seu dispositivo para a 11.16.0. -- Se seu dispositivo ainda não tiver custom firmware, você ainda pode instalá-la nesta versão gratuitamente sem qualquer hardware adicional, mas o método recomendado foi alterado. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Leia atentamente todas as páginas introdutórias (incluindo essa aqui!) antes de prosseguir. {: .notice--info} diff --git a/_pages/pt_BR/homebrew-launcher-(pichaxx).txt b/_pages/pt_BR/homebrew-launcher-(pichaxx).txt index aab615e70d..577232efe6 100644 --- a/_pages/pt_BR/homebrew-launcher-(pichaxx).txt +++ b/_pages/pt_BR/homebrew-launcher-(pichaxx).txt @@ -52,7 +52,7 @@ Nesta seção, você copiará alguns dos arquivos que serão usados para iniciar Nesta seção, você criará um arquivo de save modificado de Pokémon Picross que, quando usado, carregará o Homebrew Launcher no seu dispositivo. -1. Open [the PicHaxx Injector website](https://3dstools.nhnarwhal.com/#/pichaxx) on your computer +1. Abra [o site do PicHaxx Injector](https://3dstools.nhnarwhal.com/#/pichaxx) no seu computador 1. Selecione o seu arquivo `movable.sed` 1. Selecione "Build and Download" 1. Espere o processo ser concluído diff --git a/_pages/pt_BR/installing-boot9strap-(fredtool).txt b/_pages/pt_BR/installing-boot9strap-(fredtool).txt index f333c7ae9a..b250518668 100644 --- a/_pages/pt_BR/installing-boot9strap-(fredtool).txt +++ b/_pages/pt_BR/installing-boot9strap-(fredtool).txt @@ -108,22 +108,20 @@ Nesta seção, você executará uma série de passos muito específicos dentro d 1. Toque na quarta caixa com a letra "A" nela 1. Se o exploit for bem sucedido, seu dispositivo irá abrir o b9sTool 1. Usando os botões direcionais, mova para "Install boot9strap" - + If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open System Settings, then start over from Step 6 of Section IV + + Se você perder esta etapa, o sistema vai sair para o Menu HOME ao invés de instalar o boot9strap e você precisará abrir as Configurações do Sistema, entao começar novamente a partir do Passo 6 da seção IV 1. Pressione (A), depois pressione START e SELECT ao mesmo tempo para iniciar o processo 1. Quando for concluído e a tela inferior dizer "done", saia do b9sTool, então desligue o seu dispositivo + Você pode ter que forçar o desligamento segurando o botão power + Se seu dispositivo desligar quando você tentar ligá-lo, certifique-se de que você copiou `boot.firm` do `.zip` do Luma3DS para a raiz do seu cartão SD - + Caso veja a tela de configuração do Luma, aperte (Start) para reiniciar, depois continue com o guia + + Se você ver a tela de configuração do Luma, desligue seu dispositivo e continue para a próxima seção -#### Seção VI - Verificação do Luma3DS +#### Seção VI - Configuração do Luma3DS -Devido à natureza do exploit usado, é possível ocasionalmente (mas raramente) que o boot9strap não seja instalado. Esta seção irá verificar se o boot9strap foi instalado com sucesso ao ver se alguns arquivos que são normalmente automaticamente gerados pelo Luma3DS foram criados. - -1. Desligue seu dispositivo -1. Insira o cartão SD no seu computador -1. Verifique se a pasta `luma` existe e se `config.ini` está dentro dela - + A existência destas pastas e arquivos confirma que o Luma3DS está instalado - + Se você não ver a pasta `luma` ou `config.ini`, [siga este guia de troubleshooting](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Pressione e segure (Select), enquanto segura (Select), ligue seu dispositivo. Isso iniciará a configuração do Luma3DS + + O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração + + Para a finalidade deste guia, estas configurações serão deixadas nas configurações padrão + + Se você inicializar no Menu HOME, [siga este guia de troubleshooting](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Aperte (Start) para salvar e reiniciar Neste momento, o seu console iniciará no Luma3DS por padrão. + O Luma3DS não é diferente do Menu HOME normal. Se seu console foi inicializado no HOME Menu, ele está executando custom firmware. diff --git a/_pages/pt_BR/installing-boot9strap-(hardmod).txt b/_pages/pt_BR/installing-boot9strap-(hardmod).txt index 515ab45b34..f30048ac9a 100644 --- a/_pages/pt_BR/installing-boot9strap-(hardmod).txt +++ b/_pages/pt_BR/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ Nesta seção, instalará o custom firmware para a imagem da NAND dump, e então 1. Desconecte seu hardmod 1. Ligue o seu dispositivo 1. Seu dispositivo deve ter iniciado no menu de configuração do Luma3DS + + O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração + + Para a finalidade deste guia, estas configurações serão deixadas nas configurações padrão + Se seu dispositivo desligar quando você tentar ligá-lo, certifique-se de que você copiou `boot.firm` do `.zip` do Luma3DS para a raiz do seu cartão SD 1. Aperte (Start) para salvar e reiniciar + Se você receber um erro, basta continuar para a próxima página diff --git a/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt b/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt index 7dfb237d9d..29114b2b96 100644 --- a/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ Nesta seção, você instalará custom firmware no seu dispositivo. + Se a tela superior estiver vazia, desligue seu dispositivo e refaça a Seção III 1. Quando concluído, aperte (A) para reiniciar o seu dispositivo 1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS + + O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração + + Para a finalidade deste guia, estas configurações serão deixadas nas configurações padrão + Se seu dispositivo desligar quando você tentar ligá-lo, certifique-se de que você copiou `boot.firm` do `.zip` do Luma3DS para a raiz do seu cartão SD 1. Aperte (Start) para salvar e reiniciar diff --git a/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt b/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt index 0b75248baa..7d740e780f 100644 --- a/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ Nesta seção, você instalará custom firmware no seu dispositivo. 1. Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap + Se a tela superior estiver vazia, desligue seu dispositivo e refaça a Seção III 1. Quando concluído, aperte (A) para reiniciar o seu dispositivo -1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS +1. Seu 3DS de destino deve ter reiniciado no menu de configuração do Luma3DS + + O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração + + Para a finalidade deste guia, estas configurações serão deixadas nas configurações padrão + Se seu dispositivo desligar quando você tentar ligá-lo, certifique-se de que você copiou `boot.firm` do `.zip` do Luma3DS para a raiz do seu cartão SD 1. Aperte (Start) para salvar e reiniciar diff --git a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt index e2f5771e39..7d36573446 100644 --- a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt +++ b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ Para usar os links do [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) nes 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo 1. Seu dispositivo deve ter iniciado no menu de configuração do Luma3DS + + O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração + + Para a finalidade deste guia, estas configurações serão deixadas nas configurações padrão + Se seu dispositivo desligar quando você tentar ligá-lo, certifique-se de que você copiou `boot.firm` do `.zip` do Luma3DS para a raiz do seu cartão SD 1. Aperte (Start) para salvar e reiniciar + Se você receber um erro, basta continuar para a próxima página diff --git a/_pages/pt_BR/installing-boot9strap-(soundhax).txt b/_pages/pt_BR/installing-boot9strap-(soundhax).txt index 586cdbf773..3c9a0ec808 100644 --- a/_pages/pt_BR/installing-boot9strap-(soundhax).txt +++ b/_pages/pt_BR/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ Nesta seção, você instalará custom firmware no seu dispositivo. 1. Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap 1. Quando concluído, aperte (A) para reiniciar o seu dispositivo 1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS + + O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração + + Para a finalidade deste guia, estas configurações serão deixadas nas configurações padrão + Se seu dispositivo desligar quando você tentar ligá-lo, certifique-se de que você copiou `boot.firm` do `.zip` do Luma3DS para a raiz do seu cartão SD 1. Aperte (Start) para salvar e reiniciar + Se você receber um erro, basta continuar para a próxima página diff --git a/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt b/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt index b811fd307a..44d548e00d 100644 --- a/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt +++ b/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt @@ -1,23 +1,23 @@ --- -title: "Installing boot9strap (SSLoth-Browser)" +title: "Instalando boot9strap (SSLoth-Browser)" --- {% include toc title="Tabela de Conteúdo" %}
Detalhes técnicos (opcional) -

In order to exploit the Browser application, we need to bypass the browser version check, which is designed to disallow the use of the browser without updating to the latest system version.

-

A public proxy server is available, which, with the help of the SSLoth exploit, can bypass this check.

-

Once the bypass is active, an exploit webpage will be accessible which will do the rest of the job.

-

For technical details on the exploits that you will be using on this page, see here (SSLoth) and here (universal-otherapp).

+

Para explorar o aplicativo do navegador, precisamos ignorar a verificação da versão do navegador, que é projetado para impedir o uso do navegador sem atualizar para a versão mais recente do sistema.

+

Um servidor proxy público está disponível, o que, com a ajuda do exploit SSLoth, pode ignorar esta verificação.

+

Uma vez que o desvio estiver ativo, será acessível uma página de exploit que fará o restante do trabalho.

+

Para detalhes técnicos sobre os exploits que você usará nesta página veja aqui (SSLoth) e aqui (universal-otherapp).

{: .notice--info} ### Notas de Compatibilidade -SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing the use of new-browserhax or old-browserhax (compatible with versions 11.4.0 through 11.13.0 in all regions), which can then be used in conjunction with universal-otherapp. +O SSLoth permite que os usuários na versão 11.13.0 e inferior ignorem a verificação da versão do navegador, permitindo o uso de novo browserhax ou old-browserhax (compatível com as versões 11.4.0 através de 11.13.0 em todas as regiões), que podem então ser usados em conjunto com aplicativos universal-otherapp. -If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +Se você atualizou seu dispositivo para a versão atual usando um cartucho, seu Navegador de Internet ficará inacessível. Se for esse o caso, você precisará atualizar seu dispositivo para a versão mais recente através das Configurações do Sistema e, em seguida, seguir o método para a versão mais recente. {: .notice--warning} ### O que é necessário @@ -29,13 +29,13 @@ If you have updated your device to your current version using a cartridge, your #### Seção I - Preparação -In this section, you will copy the files needed to trigger both browserhax and universal-otherapp. +Nesta seção, você irá copiar os arquivos necessários para acionar ambos browserhax e universal-otherapp. 1. Desligue seu dispositivo 1. Insira o cartão SD no seu computador -1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` +1. Copie `otherapp.bin` para a raiz do seu cartão SD e renomeie-o para `arm11code.bin` + A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela - + If you do not see the `.bin` extension, do not add it to the end of the filename + + Se você não ver a extensão `.bin`, não adicione no final do nome do arquivo 1. Copie `boot.firm` e `boot.3dsx` do `.zip` do Luma3DS para a raiz do seu cartão SD 1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD 1. Copie o `boot9strap.firm` e o `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD @@ -43,31 +43,31 @@ In this section, you will copy the files needed to trigger both browserhax and u 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo -#### Section II - SSLoth +#### Seção II - SSLoth -In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section. +Nesta seção, você vai alterar suas configurações de conexão Internet para usar uma rede proxy criada para ignorar a verificação da versão do navegador, permitindo que o navegador funcione sem uma atualização do sistema. Isso permitirá que você acesse a página de exploit do navegador na próxima seção. -1. Launch the System Settings application -1. Navigate to `Internet Settings` -> `Connection Settings` -1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -1. Set "Proxy Settings" to "Yes", then click `Detailed Setup` -1. Set the Proxy Server to `192.9.234.11`, and the Port to `8080` -1. Click OK, then click Save -1. When prompted, click "Test" to perform the connection test - + The test should succeed -1. Click "OK" to continue -1. Press "Back" twice, then "Close" to go back to the HOME Menu +1. Saia do aplicativo Configuração do Console +1. Navegue para `Configurações da Internet` -> `Configurações de Conexão` +1. Clique no seu slot de conexão da rede e navegue para `Alterar configurações` -> `Próxima página (seta direita)` -> `Configurações de proxy` +1. Defina "Configurações do proxy" como "Sim" e, em seguida, clique em `Configuração Detalhada` +1. Defina o Servidor Proxy para `192.9.234.11`, e a Porta para `8080` +1. Clique em OK, e depois clique em Salvar +1. Quando solicitado, clique em "Testar" para executar o teste de conexão + + O teste deve ser bem-sucedido +1. Clique em "OK" para continuar +1. Pressione "Voltar" duas vezes e, em seguida, "Fechar" para voltar ao Menu HOME -#### Section III - Launching SafeB9SInstaller +#### Seção III - Iniciando o SafeB9SInstaller -In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer. +Nesta seção, você vai visitar a página de exploit do navegador, que usará ouniversal-otherapp para iniciar o instalador boot9strap (custom firmware). -1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera - + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) -1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) - + If you get an error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-ssloth-browser) - + If you get a security certificate warning, press (A) to allow the connection -1. Tap the "PROCEED TO HAXX" button +1. No Menu HOME, pressione o gatilho Esquerdo e Direito juntos para abrir a câmera + + Se você não conseguir abrir a câmera, abra o Navegador de Internet e digite manualmente a URL (`https://zoogie.github.io/web/nbhax/`) +1. Toque no botão do código QR e escaneie [este código QR](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + Se você receber um erro, [siga este guia de troubleshooting](troubleshooting#installing-boot9strap-ssloth-browser) + + Se você receber um aviso de certificado de segurança, aperte (A) para permitir a conexão +1. Toque no botão "PROCEED TO HAXX" 1. Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller #### Seção IV - Instalando o boot9strap @@ -85,17 +85,17 @@ Neste momento, o seu console iniciará no Luma3DS por padrão. + O Luma3DS não é diferente do Menu HOME normal. Se seu console foi inicializado no HOME Menu, ele está executando custom firmware. + Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação. -#### Section V - Restoring default proxy +#### Seção V - Restaurando o proxy padrão -In this section, you will restore the Internet settings back to normal. +Nesta seção, você irá restaurar as configurações de internet ao normal. -1. Launch the System Settings application -1. Navigate to `Internet Settings` -> `Connection Settings` -1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -1. Set "Proxy Settings" to "No" -1. Click OK, then click Save -1. When prompted, click "Test" to perform the connection test - + The test should succeed +1. Saia do aplicativo Configuração do Console +1. Navegue para `Configurações da Internet` -> `Configurações de Conexão` +1. Clique no seu slot de conexão da rede e navegue para `Alterar configurações` -> `Próxima página (seta direita)` -> `Configurações de proxy` +1. Defina "Configurações de proxy" para "Não" +1. Clique em OK, e depois clique em Salvar +1. Quando solicitado, clique em "Testar" para executar o teste de conexão + + O teste deve ser bem-sucedido 1. Desligue seu dispositivo ___ diff --git a/_pages/pt_BR/installing-boot9strap-(usm).txt b/_pages/pt_BR/installing-boot9strap-(usm).txt index 6c8d4bd295..41086044a7 100644 --- a/_pages/pt_BR/installing-boot9strap-(usm).txt +++ b/_pages/pt_BR/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ Nesta seção, você instalará custom firmware no seu dispositivo. + Se a tela superior estiver vazia, desligue seu dispositivo e refaça a Seção III 1. Quando concluído, aperte (A) para reiniciar o seu dispositivo 1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS + + O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração + + Para a finalidade deste guia, estas configurações serão deixadas nas configurações padrão + Se seu dispositivo desligar quando você tentar ligá-lo, certifique-se de que você copiou `boot.firm` do `.zip` do Luma3DS para a raiz do seu cartão SD 1. Aperte (Start) para salvar e reiniciar diff --git a/_pages/pt_BR/site-navigation.txt b/_pages/pt_BR/site-navigation.txt index 09a621610e..f82eb79dc1 100644 --- a/_pages/pt_BR/site-navigation.txt +++ b/_pages/pt_BR/site-navigation.txt @@ -48,7 +48,7 @@ sitemap: false * [Instalando boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) + [Instalando boot9strap (ntrboothax)](installing-boot9strap-(ntrboothax)) + [Instalando boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Instalando boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) + [Instalando boot9strap (USM)](installing-boot9strap-(usm)) + [Mover EmuNAND](move-emunand) + [ntrboot](ntrboot) diff --git a/_pages/pt_BR/troubleshooting.txt b/_pages/pt_BR/troubleshooting.txt index 39b4442238..0adddeaa56 100644 --- a/_pages/pt_BR/troubleshooting.txt +++ b/_pages/pt_BR/troubleshooting.txt @@ -70,7 +70,7 @@ O site determinou que seu `movable.sed` não pode ser brute-forced. Certifique-s Seus arquivos `00000001.sav` e/ou `otherapp.bin` podem estar fora do local apropriado. Certifique-se de que `00000001. av` está em `Nintendo 3DS` -> `` ->` -> `title` -> `00040000` -> `0017c100` -> `data` e que `otherapp.bin` está na raiz do seu cartão SD. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Certifique-se de que o arquivo tem exatamente o nome de `00000001.sav` e que você usou o `movable.sed` do seu console para criá-lo. Baixe novamente a última versão do [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) e coloque-o na raiz do seu cartão SD. Não adicione a extensão `.bin` se você não a vê. +Se seus arquivos estiverem nos locais corretos, re-crie o save usando a [PicHaxx Save Tool](https://3dstools.nhnarwhal. om/#/pichaxx), então coloque-o em `Nintendo 3DS` -> `` ->` -> `title` -> `00040000` -> `0017c100` -> `data`. Certifique-se de que o arquivo tem exatamente o nome de `00000001.sav` e que você usou o `movable.sed` do seu console para criá-lo. Baixe novamente a última versão do [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), coloque o arquivo `.bin` relevante para o seu console da pasta `otherapps_with_CfgS` na raiz do seu cartão SD, e renomeie-o para `otherapp.bin`. Não adicione a extensão `.bin` se você não a vê. ### "An exception occurred" ou Errdisp quando abre o Picross @@ -82,7 +82,7 @@ Há um problema com seu arquivo `otherapp.bin`. Baixe a última versão do [unSA ### O jogo inicia normalmente -Seu arquivo `00000001.sav` modificado pode estar fora do local apropriado, ou você pode ter usado o `movable.sed` errado ao criá-lo. Re-generate your `movable.sed` from [Bruteforce Movable](https://seedminer.hacks.guide), then re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx) and place the resulting file (`00000001.sav`) in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. +Seu arquivo `00000001.sav` modificado pode estar fora do local apropriado, ou você pode ter usado o `movable.sed` errado ao criá-lo. Regere seu `movable.sed` de [Bruteforce Movable](https://seedminer.hacks.guide), e re-crie o save usando a [PicHaxx Save Tool](https://3dstools.nhnarwhal. om/#/pichaxx) e coloque o arquivo resultante (`00000001.sav`) em `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. --- @@ -114,49 +114,49 @@ Se isso falhar, tente usar outro cartão SD. --- -## Installing boot9strap (SSLoth-Browser) +## Instalando boot9strap (SSLoth-Browser) -### Red/purple/pink and white screen after running browserhax +### Tela vermelha/roxa/rosa e branca após a execução do browserhax -This likely indicates that you already have custom firmware. Você deve [checar por CFW](checking-for-cfw). +Isso provavelmente indica que você já possui custom firmware. Você deve [checar por CFW](checking-for-cfw). ### "An error has occurred. Hold down the POWER button to turn off the power..." (tela preta com texto) -The file `arm11code.bin` is missing or misplaced. Download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), place `otherapp.bin` on the root of your SD card and rename it to `arm11code.bin`. Não adicione a extensão `.bin` se você não a vê. +O arquivo `arm11code.bin` está faltando ou está deslocado. Baixe a última versão do [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), coloque `otherapp.bin` na raiz do seu cartão SD e renomeie-o para `arm11code.bin`. Não adicione a extensão `.bin` se você não a vê. ### "An error has occurred, forcing the software to close..." (texto branco) -There is an issue with your `arm11code.bin` file. Download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), place `otherapp.bin` on the root of your SD card and rename it to `arm11code.bin`. Não adicione a extensão `.bin` se você não a vê. +Há um problema com o seu arquivo `arm11code.bin`. Baixe a última versão do [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), coloque `otherapp.bin` na raiz do seu cartão SD e renomeie-o para `arm11code.bin`. Não adicione a extensão `.bin` se você não a vê. -### Opening the browserhax QR code or URL crashes +### Abrindo o código QR do browserhax ou falhas de URL -Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps. +Exploits de navegador (como este) são muitas vezes instáveis e caem com frequência, mas em alguns casos eles podem ser consertados seguindo as seguintes etapas. -1. Launch the browser, then launch the browser settings -1. Scroll to the bottom and Initialize Savedata (it also may be called Clear All Save Data) -1. Try the exploit again +1. Inicie o navegador, e então abra as configurações do navegador +1. Desça até o final e selecione `Deletar dados salvos` +1. Tente o exploit novamente -### Opening the browser prompts for a system update instead +### Abrir o navegador pede para que atualize o sistema -The SSLoth proxy was incorrectly configured. Re-do the SSLoth section on the page. +O proxy SSLoth está configurado incorretamente. Refaça a seção SSLoth na página. -### Error 032-0420 when trying to open the browser +### Erro 032-0420 ao tentar abrir o navegador -Follow these steps in order: +Siga estes passos em ordem: -1. Launch the System Settings application -1. Navigate to `Internet Settings` -> `Connection Settings` -1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -1. Set "Proxy Settings" to "No" -1. Click OK, then click Save -1. When prompted, click "Test" to perform the connection test - + The test should succeed -1. Click "OK" to continue -1. Press "Back" twice, then "Close" to go back to the HOME Menu -1. Open the Internet Browser once -1. If prompted about a system update, press OK - + This won't actually update the system -1. Start again from [Section II](installing-boot9strap-(ssloth-browser).html#section-ii---ssloth) +1. Saia do aplicativo Configuração do Console +1. Navegue para `Configurações da Internet` -> `Configurações de Conexão` +1. Clique no seu slot de conexão da rede e navegue para `Alterar configurações` -> `Próxima página (seta direita)` -> `Configurações de proxy` +1. Defina "Configurações de proxy" para "Não" +1. Clique em OK, e depois clique em Salvar +1. Quando solicitado, clique em "Testar" para executar o teste de conexão + + O teste deve ser bem-sucedido +1. Clique em "OK" para continuar +1. Pressione "Voltar" duas vezes e, em seguida, "Fechar" para voltar ao Menu HOME +1. Abra o Navegador Internet +1. Se for solicitado sobre uma atualização de sistema, pressione OK + + Isso não vai atualizar o sistema +1. Comece novamente pela [Seção II](installing-boot9strap-(ssloth-browser).html#section-ii---ssloth) ### Failed to open SafeB9SInstaller.bin @@ -164,11 +164,11 @@ O arquivo `SafeB9SInstaller.bin` está ausente ou fora do lugar apropriado. Baix ### Congelando em "Doing agbhax..." -There may be an issue with your `arm11code.bin` file. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), place it on the root of your SD card, and rename it to `arm11code.bin`. Não adicione a extensão `.bin` se você não a vê. +Pode haver um problema com o seu arquivo `arm11code.bin`. Baixe novamente a versão mais recente do [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), coloque-o na raiz do seu cartão SD e renomeie-o para `arm11code.bin`. Não adicione a extensão `.bin` se você não a vê. -If you have a Taiwanese unit (with a T in the version string, ie. 11.3.0-##T), you will not be able to follow these instructions, and you will need to update your console and follow [Seedminer](seedminer) instead. +Se tiver uma unidade de Taiwan (com um T na linha de versão, por exemplo, 11.3.0-##T), você não será capaz de seguir estas instruções, e precisará atualizar o seu console e seguir [Seedminer](seedminer). -If you have a Mainland Chinese unit (with a C in the version string, ie. 11.3.0-##C), join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance. +Se você tiver uma unidade chinesa continental (com um C na linha de versão, ie. 11.3.0-##C), junte-se [Nintendo Homebrew no Discord](https://discord.gg/MWxPgEp) para assistência. ### "PrepareArm9ForTwl returned error c8804631!" @@ -364,7 +364,7 @@ Sua versão do Luma3DS está desatualizada. Baixe a versão mais recente do [Lum #### "An error has occurred. Hold down the POWER button to turn off the power..." Os ARM11 exception handlers estão desabilitados, ou custom firmware não está instalado. Tente habilitar os ARM11 exception handlers: - + Desligue o seu dispositivo + + Desligue seu dispositivo + Segure (Select) + Ligue seu dispositivo enquanto segura o botão (Select) + Se a caixa "Disable ARM11 exception handlers" estiver marcada, desmarque a opção diff --git a/_pages/pt_BR/updating-b9s.txt b/_pages/pt_BR/updating-b9s.txt index 8100f7f120..643fed56a2 100644 --- a/_pages/pt_BR/updating-b9s.txt +++ b/_pages/pt_BR/updating-b9s.txt @@ -51,6 +51,8 @@ Para todas as etapas nesta seção, substitua quaisquer arquivos existentes no s 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo 1. Caso seu dispositivo tenha sido inicializado no menu de configuração do Luma3DS, pressione (Start) para salvar e reiniciar + + O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração + + Para a finalidade deste guia, estas configurações serão deixadas nas configurações padrão ___ diff --git a/_pages/pt_PT/a9lh-to-b9s.txt b/_pages/pt_PT/a9lh-to-b9s.txt index 8ac541c03a..a87c5c2b44 100644 --- a/_pages/pt_PT/a9lh-to-b9s.txt +++ b/_pages/pt_PT/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/pt_PT/bannerbomb3-fredtool-(twn).txt b/_pages/pt_PT/bannerbomb3-fredtool-(twn).txt index 17ccca1d3e..8e3820fea7 100644 --- a/_pages/pt_PT/bannerbomb3-fredtool-(twn).txt +++ b/_pages/pt_PT/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/pt_PT/faq.txt b/_pages/pt_PT/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/pt_PT/faq.txt +++ b/_pages/pt_PT/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/pt_PT/home.txt b/_pages/pt_PT/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/pt_PT/home.txt +++ b/_pages/pt_PT/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/pt_PT/installing-boot9strap-(fredtool).txt b/_pages/pt_PT/installing-boot9strap-(fredtool).txt index 41fde96a62..9b389ee19f 100644 --- a/_pages/pt_PT/installing-boot9strap-(fredtool).txt +++ b/_pages/pt_PT/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/pt_PT/installing-boot9strap-(hardmod).txt b/_pages/pt_PT/installing-boot9strap-(hardmod).txt index 187273f1a1..4f0888d535 100644 --- a/_pages/pt_PT/installing-boot9strap-(hardmod).txt +++ b/_pages/pt_PT/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt b/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt +++ b/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt b/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt +++ b/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt index f569a867f5..de4273bf55 100644 --- a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt +++ b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/pt_PT/installing-boot9strap-(soundhax).txt b/_pages/pt_PT/installing-boot9strap-(soundhax).txt index b15630b79f..81aff24d34 100644 --- a/_pages/pt_PT/installing-boot9strap-(soundhax).txt +++ b/_pages/pt_PT/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/pt_PT/installing-boot9strap-(usm).txt b/_pages/pt_PT/installing-boot9strap-(usm).txt index c706e3641d..58be815045 100644 --- a/_pages/pt_PT/installing-boot9strap-(usm).txt +++ b/_pages/pt_PT/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/pt_PT/troubleshooting.txt b/_pages/pt_PT/troubleshooting.txt index 3cb548dda5..ca8c4d8017 100644 --- a/_pages/pt_PT/troubleshooting.txt +++ b/_pages/pt_PT/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/pt_PT/updating-b9s.txt b/_pages/pt_PT/updating-b9s.txt index 5c164102aa..eb6052f342 100644 --- a/_pages/pt_PT/updating-b9s.txt +++ b/_pages/pt_PT/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/ro_RO/a9lh-to-b9s.txt b/_pages/ro_RO/a9lh-to-b9s.txt index 2956264f9c..84fcaf0221 100644 --- a/_pages/ro_RO/a9lh-to-b9s.txt +++ b/_pages/ro_RO/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ Pentru toți pașii din această secțiune, suprascrieți fișierele existente d 1. Când vi se solicită, introduceți combinația de butoane ca să instalați boot9strap 1. Once it is complete, press (A) to reboot your device 1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Apăsați (Start) pentru a salva și reporni diff --git a/_pages/ro_RO/bannerbomb3-fredtool-(twn).txt b/_pages/ro_RO/bannerbomb3-fredtool-(twn).txt index 11464a0c36..33c819f19c 100644 --- a/_pages/ro_RO/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ro_RO/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ Dacă preferați un ghid vizual pentru aceasta secțiune, deja este disponibil u 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + Este posibil să aveţi nevoie să forțați oprirea dispozitivului apăsând butonul de pornire + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Închideți dispozitivul -1. Introduceți cardul SD în calculator -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Apăsați (Start) pentru a salva și reporni #### Section VII - Restoring DS Download Play diff --git a/_pages/ro_RO/faq.txt b/_pages/ro_RO/faq.txt index bdc2a4105c..3f735ede37 100644 --- a/_pages/ro_RO/faq.txt +++ b/_pages/ro_RO/faq.txt @@ -4,11 +4,10 @@ title: "Întrebări frecvente" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ro_RO/home.txt b/_pages/ro_RO/home.txt index e8908af901..7d44b767e0 100644 --- a/_pages/ro_RO/home.txt +++ b/_pages/ro_RO/home.txt @@ -9,16 +9,6 @@ header: excerpt: "Un ghid complet spre firmware personalizat pentru 3DS,
de la stoc la boot9strap.
" # --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Citiți cu atenție toate paginile introductive (inclusiv aceasta!) înainte de a continua. {: .notice--info} diff --git a/_pages/ro_RO/installing-boot9strap-(fredtool).txt b/_pages/ro_RO/installing-boot9strap-(fredtool).txt index ea34859c43..5910347456 100644 --- a/_pages/ro_RO/installing-boot9strap-(fredtool).txt +++ b/_pages/ro_RO/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Odată completat și cu ecranul inferior zicând "done.", ieșiți din b9sTool, apoi închideți dispozitivul + Este posibil să aveţi nevoie să forțați oprirea dispozitivului apăsând butonul de pornire + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Închideți dispozitivul -1. Introduceți cardul SD în calculator -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Apăsați (Start) pentru a salva și reporni At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/ro_RO/installing-boot9strap-(hardmod).txt b/_pages/ro_RO/installing-boot9strap-(hardmod).txt index 7221458402..a9fb234def 100644 --- a/_pages/ro_RO/installing-boot9strap-(hardmod).txt +++ b/_pages/ro_RO/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Deconectaţi hardmod-ul 1. Porniți dispozitivul 1. Dispozitivul dumneavoastră ar trebui să fi pornit în meniul de configurare Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Apăsați (Start) pentru a salva și reporni + If you get an error, just continue to the next page diff --git a/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt b/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt index 42626c549f..6278f4bef2 100644 --- a/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Apăsați (Start) pentru a salva și reporni diff --git a/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt b/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt index 843c46cc43..4fcca7efbe 100644 --- a/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Apăsați (Start) pentru a salva și reporni diff --git a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt index 06544f1d57..a06678a80f 100644 --- a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt +++ b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reintroduceți cardul SD în dispozitivul dumneavoastră 1. Porniți dispozitivul 1. Dispozitivul dumneavoastră ar trebui să fi pornit în meniul de configurare Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Apăsați (Start) pentru a salva și reporni + If you get an error, just continue to the next page diff --git a/_pages/ro_RO/installing-boot9strap-(soundhax).txt b/_pages/ro_RO/installing-boot9strap-(soundhax).txt index a421e2c3fb..c44d485099 100644 --- a/_pages/ro_RO/installing-boot9strap-(soundhax).txt +++ b/_pages/ro_RO/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Apăsați (Start) pentru a salva și reporni + If you get an error, just continue to the next page diff --git a/_pages/ro_RO/installing-boot9strap-(usm).txt b/_pages/ro_RO/installing-boot9strap-(usm).txt index f6310f7c99..c74eb648ff 100644 --- a/_pages/ro_RO/installing-boot9strap-(usm).txt +++ b/_pages/ro_RO/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Apăsați (Start) pentru a salva și reporni diff --git a/_pages/ro_RO/troubleshooting.txt b/_pages/ro_RO/troubleshooting.txt index 202653934c..a9a5fe3dca 100644 --- a/_pages/ro_RO/troubleshooting.txt +++ b/_pages/ro_RO/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/ro_RO/updating-b9s.txt b/_pages/ro_RO/updating-b9s.txt index 68be9923de..91f52bcb4e 100644 --- a/_pages/ro_RO/updating-b9s.txt +++ b/_pages/ro_RO/updating-b9s.txt @@ -51,6 +51,8 @@ Pentru toți pașii din această secțiune, suprascrieți fișierele existente d 1. Reintroduceți cardul SD în dispozitivul dumneavoastră 1. Porniți dispozitivul 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/ru_RU/a9lh-to-b9s.txt b/_pages/ru_RU/a9lh-to-b9s.txt index 76c7373db2..9970aa05ce 100644 --- a/_pages/ru_RU/a9lh-to-b9s.txt +++ b/_pages/ru_RU/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. При появлении запроса, введите указанную комбинацию кнопок для установки boot9strap 1. Once it is complete, press (A) to reboot your device 1. Ваша консоль должна перезагрузиться в меню конфигурации Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться diff --git a/_pages/ru_RU/bannerbomb3-fredtool-(twn).txt b/_pages/ru_RU/bannerbomb3-fredtool-(twn).txt index 024eefabb4..93c8e3a444 100644 --- a/_pages/ru_RU/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ru_RU/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you see a configuration menu, you already have CFW, and continuing with these 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + При необходимости выключите консоль принудительно, удерживая кнопку питания + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Выключите консоль -1. Вставьте SD-карту в компьютер -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться #### Section VII - Restoring DS Download Play diff --git a/_pages/ru_RU/faq.txt b/_pages/ru_RU/faq.txt index 5918cc9b57..6089ed8e88 100644 --- a/_pages/ru_RU/faq.txt +++ b/_pages/ru_RU/faq.txt @@ -4,11 +4,10 @@ title: "Вопросы и ответы" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ru_RU/home.txt b/_pages/ru_RU/home.txt index 45f85d2d0f..de44ada997 100644 --- a/_pages/ru_RU/home.txt +++ b/_pages/ru_RU/home.txt @@ -9,16 +9,6 @@ header: excerpt: "Полное руководство по прошивке 3DS,
от начала до boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Внимательно прочитайте все вводные страницы (включая эту!) прежде чем продолжить. {: .notice--info} diff --git a/_pages/ru_RU/installing-boot9strap-(fredtool).txt b/_pages/ru_RU/installing-boot9strap-(fredtool).txt index f081766b00..5ebba74493 100644 --- a/_pages/ru_RU/installing-boot9strap-(fredtool).txt +++ b/_pages/ru_RU/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. После завершения процесса и появления на нижнем экране надписи "done.", выйдите из b9sTool, затем выключите консоль + При необходимости выключите консоль принудительно, удерживая кнопку питания + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Выключите консоль -1. Вставьте SD-карту в компьютер -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/ru_RU/installing-boot9strap-(hardmod).txt b/_pages/ru_RU/installing-boot9strap-(hardmod).txt index c01a4dcf4c..0739126424 100644 --- a/_pages/ru_RU/installing-boot9strap-(hardmod).txt +++ b/_pages/ru_RU/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Отключите хардмод 1. Включите консоль 1. Ваша консоль должна загрузиться в меню конфигурации Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + If you get an error, just continue to the next page diff --git a/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt b/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt index bb951348d9..976751056d 100644 --- a/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Ваша консоль должна перезагрузиться в меню конфигурации Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться diff --git a/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt b/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt index 49c6f6b5f4..fef213d8f1 100644 --- a/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Ваша консоль должна перезагрузиться в меню конфигурации Luma3DS +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться diff --git a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt index 5759ca24c0..73f2410375 100644 --- a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt +++ b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Вставьте SD-карту обратно в консоль 1. Включите консоль 1. Ваша консоль должна загрузиться в меню конфигурации Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + If you get an error, just continue to the next page diff --git a/_pages/ru_RU/installing-boot9strap-(soundhax).txt b/_pages/ru_RU/installing-boot9strap-(soundhax).txt index 350db12413..a197772bbf 100644 --- a/_pages/ru_RU/installing-boot9strap-(soundhax).txt +++ b/_pages/ru_RU/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Ваша консоль должна перезагрузиться в меню конфигурации Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + If you get an error, just continue to the next page diff --git a/_pages/ru_RU/installing-boot9strap-(usm).txt b/_pages/ru_RU/installing-boot9strap-(usm).txt index e648f1130d..796f6969c2 100644 --- a/_pages/ru_RU/installing-boot9strap-(usm).txt +++ b/_pages/ru_RU/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Ваша консоль должна перезагрузиться в меню конфигурации Luma3DS + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться diff --git a/_pages/ru_RU/troubleshooting.txt b/_pages/ru_RU/troubleshooting.txt index 7b9588b0b3..91c1957c0a 100644 --- a/_pages/ru_RU/troubleshooting.txt +++ b/_pages/ru_RU/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/ru_RU/updating-b9s.txt b/_pages/ru_RU/updating-b9s.txt index 75445d0602..e56dd774d3 100644 --- a/_pages/ru_RU/updating-b9s.txt +++ b/_pages/ru_RU/updating-b9s.txt @@ -51,6 +51,8 @@ While we believe that custom firmware is safe for online use, there have been on 1. Вставьте SD-карту обратно в консоль 1. Включите консоль 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/sv_SE/a9lh-to-b9s.txt b/_pages/sv_SE/a9lh-to-b9s.txt index d8d2ae7460..0bdd69a761 100644 --- a/_pages/sv_SE/a9lh-to-b9s.txt +++ b/_pages/sv_SE/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/sv_SE/bannerbomb3-fredtool-(twn).txt b/_pages/sv_SE/bannerbomb3-fredtool-(twn).txt index 0c5e985ede..f974e78f60 100644 --- a/_pages/sv_SE/bannerbomb3-fredtool-(twn).txt +++ b/_pages/sv_SE/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Stäng av din enhet -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/sv_SE/faq.txt b/_pages/sv_SE/faq.txt index a4ade5036c..f886754036 100644 --- a/_pages/sv_SE/faq.txt +++ b/_pages/sv_SE/faq.txt @@ -4,11 +4,10 @@ title: "Vanliga Frågor" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/sv_SE/home.txt b/_pages/sv_SE/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/sv_SE/home.txt +++ b/_pages/sv_SE/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/sv_SE/installing-boot9strap-(fredtool).txt b/_pages/sv_SE/installing-boot9strap-(fredtool).txt index 5372bf4379..70245c74cf 100644 --- a/_pages/sv_SE/installing-boot9strap-(fredtool).txt +++ b/_pages/sv_SE/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Stäng av din enhet -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/sv_SE/installing-boot9strap-(hardmod).txt b/_pages/sv_SE/installing-boot9strap-(hardmod).txt index 039f9e3023..2b5ba832cb 100644 --- a/_pages/sv_SE/installing-boot9strap-(hardmod).txt +++ b/_pages/sv_SE/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt b/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt +++ b/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt b/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt +++ b/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt index da01690ddc..c2e88ff937 100644 --- a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt +++ b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Sätt tillbaka ditt SD-kort i din enhet 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/sv_SE/installing-boot9strap-(soundhax).txt b/_pages/sv_SE/installing-boot9strap-(soundhax).txt index fe95e556be..3d997b2886 100644 --- a/_pages/sv_SE/installing-boot9strap-(soundhax).txt +++ b/_pages/sv_SE/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/sv_SE/installing-boot9strap-(usm).txt b/_pages/sv_SE/installing-boot9strap-(usm).txt index bcf9c7a7bb..4e09559e1b 100644 --- a/_pages/sv_SE/installing-boot9strap-(usm).txt +++ b/_pages/sv_SE/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/sv_SE/troubleshooting.txt b/_pages/sv_SE/troubleshooting.txt index 5a522f3290..321f44f356 100644 --- a/_pages/sv_SE/troubleshooting.txt +++ b/_pages/sv_SE/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/sv_SE/updating-b9s.txt b/_pages/sv_SE/updating-b9s.txt index 275f70c739..70b0bb7512 100644 --- a/_pages/sv_SE/updating-b9s.txt +++ b/_pages/sv_SE/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Sätt tillbaka ditt SD-kort i din enhet 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/th_TH/a9lh-to-b9s.txt b/_pages/th_TH/a9lh-to-b9s.txt index f222dc3e5a..f32f814a31 100644 --- a/_pages/th_TH/a9lh-to-b9s.txt +++ b/_pages/th_TH/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/th_TH/bannerbomb3-fredtool-(twn).txt b/_pages/th_TH/bannerbomb3-fredtool-(twn).txt index 983e132fe3..7457946013 100644 --- a/_pages/th_TH/bannerbomb3-fredtool-(twn).txt +++ b/_pages/th_TH/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/th_TH/faq.txt b/_pages/th_TH/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/th_TH/faq.txt +++ b/_pages/th_TH/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/th_TH/home.txt b/_pages/th_TH/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/th_TH/home.txt +++ b/_pages/th_TH/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/th_TH/installing-boot9strap-(fredtool).txt b/_pages/th_TH/installing-boot9strap-(fredtool).txt index 41fde96a62..9b389ee19f 100644 --- a/_pages/th_TH/installing-boot9strap-(fredtool).txt +++ b/_pages/th_TH/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/th_TH/installing-boot9strap-(hardmod).txt b/_pages/th_TH/installing-boot9strap-(hardmod).txt index 187273f1a1..4f0888d535 100644 --- a/_pages/th_TH/installing-boot9strap-(hardmod).txt +++ b/_pages/th_TH/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/th_TH/installing-boot9strap-(hbl-usm).txt b/_pages/th_TH/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/th_TH/installing-boot9strap-(hbl-usm).txt +++ b/_pages/th_TH/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/th_TH/installing-boot9strap-(kartdlphax).txt b/_pages/th_TH/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/th_TH/installing-boot9strap-(kartdlphax).txt +++ b/_pages/th_TH/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/th_TH/installing-boot9strap-(ntrboot).txt b/_pages/th_TH/installing-boot9strap-(ntrboot).txt index 370ed94c1b..b77ea450ab 100644 --- a/_pages/th_TH/installing-boot9strap-(ntrboot).txt +++ b/_pages/th_TH/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/th_TH/installing-boot9strap-(soundhax).txt b/_pages/th_TH/installing-boot9strap-(soundhax).txt index d9c13f9bc7..b94e84c610 100644 --- a/_pages/th_TH/installing-boot9strap-(soundhax).txt +++ b/_pages/th_TH/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/th_TH/installing-boot9strap-(usm).txt b/_pages/th_TH/installing-boot9strap-(usm).txt index c706e3641d..58be815045 100644 --- a/_pages/th_TH/installing-boot9strap-(usm).txt +++ b/_pages/th_TH/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/th_TH/troubleshooting.txt b/_pages/th_TH/troubleshooting.txt index 3cb548dda5..ca8c4d8017 100644 --- a/_pages/th_TH/troubleshooting.txt +++ b/_pages/th_TH/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/th_TH/updating-b9s.txt b/_pages/th_TH/updating-b9s.txt index f105ea0204..e08d20a2fd 100644 --- a/_pages/th_TH/updating-b9s.txt +++ b/_pages/th_TH/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/tr_TR/a9lh-to-b9s.txt b/_pages/tr_TR/a9lh-to-b9s.txt index 86b8b3ce54..2d1509dfc8 100644 --- a/_pages/tr_TR/a9lh-to-b9s.txt +++ b/_pages/tr_TR/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. İstandiğinde boot9strap için verilen anahtarı girin 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Kaydedip yeniden başlatmak için (Start) basın diff --git a/_pages/tr_TR/bannerbomb3-fredtool-(twn).txt b/_pages/tr_TR/bannerbomb3-fredtool-(twn).txt index 8f6ac02508..85cf56bb3a 100644 --- a/_pages/tr_TR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/tr_TR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Cihazınızı kapatın -1. SD kartınızı bilgisayarınıza takın -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Kaydedip yeniden başlatmak için (Start) basın #### Section VII - Restoring DS Download Play diff --git a/_pages/tr_TR/faq.txt b/_pages/tr_TR/faq.txt index b83a39c276..ea29a8622a 100644 --- a/_pages/tr_TR/faq.txt +++ b/_pages/tr_TR/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/tr_TR/home.txt b/_pages/tr_TR/home.txt index 68cf2356ad..07025785a1 100644 --- a/_pages/tr_TR/home.txt +++ b/_pages/tr_TR/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/tr_TR/installing-boot9strap-(fredtool).txt b/_pages/tr_TR/installing-boot9strap-(fredtool).txt index 19b7296fc0..ba4784bac3 100644 --- a/_pages/tr_TR/installing-boot9strap-(fredtool).txt +++ b/_pages/tr_TR/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Cihazınızı kapatın -1. SD kartınızı bilgisayarınıza takın -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Kaydedip yeniden başlatmak için (Start) basın At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/tr_TR/installing-boot9strap-(hardmod).txt b/_pages/tr_TR/installing-boot9strap-(hardmod).txt index 87b2b0711b..83d3c2d6b5 100644 --- a/_pages/tr_TR/installing-boot9strap-(hardmod).txt +++ b/_pages/tr_TR/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Kaydedip yeniden başlatmak için (Start) basın + If you get an error, just continue to the next page diff --git a/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt b/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt index 7f0e418b77..024ea6f2c1 100644 --- a/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Kaydedip yeniden başlatmak için (Start) basın diff --git a/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt b/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt index d6326c901b..7ece5728b1 100644 --- a/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Kaydedip yeniden başlatmak için (Start) basın diff --git a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt index 9953646be6..45d1595108 100644 --- a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt +++ b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. SD kartınızı cihazınıza tekrar takın 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Kaydedip yeniden başlatmak için (Start) basın + If you get an error, just continue to the next page diff --git a/_pages/tr_TR/installing-boot9strap-(soundhax).txt b/_pages/tr_TR/installing-boot9strap-(soundhax).txt index 788abfe080..f9814e3c97 100644 --- a/_pages/tr_TR/installing-boot9strap-(soundhax).txt +++ b/_pages/tr_TR/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Kaydedip yeniden başlatmak için (Start) basın + If you get an error, just continue to the next page diff --git a/_pages/tr_TR/installing-boot9strap-(usm).txt b/_pages/tr_TR/installing-boot9strap-(usm).txt index b2df2efdd6..53cee172b5 100644 --- a/_pages/tr_TR/installing-boot9strap-(usm).txt +++ b/_pages/tr_TR/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Kaydedip yeniden başlatmak için (Start) basın diff --git a/_pages/tr_TR/troubleshooting.txt b/_pages/tr_TR/troubleshooting.txt index 4e444ac49d..16aec3fe02 100644 --- a/_pages/tr_TR/troubleshooting.txt +++ b/_pages/tr_TR/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/tr_TR/updating-b9s.txt b/_pages/tr_TR/updating-b9s.txt index c2dc685b7d..eed86ae40c 100644 --- a/_pages/tr_TR/updating-b9s.txt +++ b/_pages/tr_TR/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. SD kartınızı cihazınıza tekrar takın 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/uk_UA/a9lh-to-b9s.txt b/_pages/uk_UA/a9lh-to-b9s.txt index f222dc3e5a..f32f814a31 100644 --- a/_pages/uk_UA/a9lh-to-b9s.txt +++ b/_pages/uk_UA/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/uk_UA/bannerbomb3-fredtool-(twn).txt b/_pages/uk_UA/bannerbomb3-fredtool-(twn).txt index 983e132fe3..7457946013 100644 --- a/_pages/uk_UA/bannerbomb3-fredtool-(twn).txt +++ b/_pages/uk_UA/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/uk_UA/faq.txt b/_pages/uk_UA/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/uk_UA/faq.txt +++ b/_pages/uk_UA/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/uk_UA/home.txt b/_pages/uk_UA/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/uk_UA/home.txt +++ b/_pages/uk_UA/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/uk_UA/installing-boot9strap-(fredtool).txt b/_pages/uk_UA/installing-boot9strap-(fredtool).txt index 41fde96a62..9b389ee19f 100644 --- a/_pages/uk_UA/installing-boot9strap-(fredtool).txt +++ b/_pages/uk_UA/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/uk_UA/installing-boot9strap-(hardmod).txt b/_pages/uk_UA/installing-boot9strap-(hardmod).txt index 187273f1a1..4f0888d535 100644 --- a/_pages/uk_UA/installing-boot9strap-(hardmod).txt +++ b/_pages/uk_UA/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt b/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt +++ b/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt b/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt +++ b/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt index 370ed94c1b..b77ea450ab 100644 --- a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt +++ b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/uk_UA/installing-boot9strap-(soundhax).txt b/_pages/uk_UA/installing-boot9strap-(soundhax).txt index d9c13f9bc7..b94e84c610 100644 --- a/_pages/uk_UA/installing-boot9strap-(soundhax).txt +++ b/_pages/uk_UA/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/uk_UA/installing-boot9strap-(usm).txt b/_pages/uk_UA/installing-boot9strap-(usm).txt index c706e3641d..58be815045 100644 --- a/_pages/uk_UA/installing-boot9strap-(usm).txt +++ b/_pages/uk_UA/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/uk_UA/troubleshooting.txt b/_pages/uk_UA/troubleshooting.txt index 3cb548dda5..ca8c4d8017 100644 --- a/_pages/uk_UA/troubleshooting.txt +++ b/_pages/uk_UA/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/uk_UA/updating-b9s.txt b/_pages/uk_UA/updating-b9s.txt index f105ea0204..e08d20a2fd 100644 --- a/_pages/uk_UA/updating-b9s.txt +++ b/_pages/uk_UA/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/vi_VN/a9lh-to-b9s.txt b/_pages/vi_VN/a9lh-to-b9s.txt index f222dc3e5a..f32f814a31 100644 --- a/_pages/vi_VN/a9lh-to-b9s.txt +++ b/_pages/vi_VN/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. When prompted, input the key combo given to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices) 1. Press (Start) to save and reboot diff --git a/_pages/vi_VN/bannerbomb3-fredtool-(twn).txt b/_pages/vi_VN/bannerbomb3-fredtool-(twn).txt index 983e132fe3..7457946013 100644 --- a/_pages/vi_VN/bannerbomb3-fredtool-(twn).txt +++ b/_pages/vi_VN/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### What you need @@ -132,19 +132,15 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot #### Section VII - Restoring DS Download Play diff --git a/_pages/vi_VN/faq.txt b/_pages/vi_VN/faq.txt index a532c7126c..57331fe3a1 100644 --- a/_pages/vi_VN/faq.txt +++ b/_pages/vi_VN/faq.txt @@ -4,11 +4,10 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: +**The latest 3DS firmware is 11.16.0**. Here's what you should know: - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/vi_VN/home.txt b/_pages/vi_VN/home.txt index 6c1f9a0b3f..fdd3e79760 100644 --- a/_pages/vi_VN/home.txt +++ b/_pages/vi_VN/home.txt @@ -9,16 +9,6 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. Here's what you should know: - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/vi_VN/installing-boot9strap-(fredtool).txt b/_pages/vi_VN/installing-boot9strap-(fredtool).txt index 41fde96a62..9b389ee19f 100644 --- a/_pages/vi_VN/installing-boot9strap-(fredtool).txt +++ b/_pages/vi_VN/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + You may have to force power off by holding the power button + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. Power off your device -1. Insert your SD card into your computer -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press (Start) to save and reboot At this point, your console will boot to Luma3DS by default. + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. diff --git a/_pages/vi_VN/installing-boot9strap-(hardmod).txt b/_pages/vi_VN/installing-boot9strap-(hardmod).txt index 187273f1a1..4f0888d535 100644 --- a/_pages/vi_VN/installing-boot9strap-(hardmod).txt +++ b/_pages/vi_VN/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. Disconnect your hardmod 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt b/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt index 0d589c1b0c..65bcd5f692 100644 --- a/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt +++ b/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt b/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt index b5eedf74b3..a795051412 100644 --- a/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt +++ b/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device -1. Your device should have rebooted into the Luma3DS configuration menu +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt index 370ed94c1b..b77ea450ab 100644 --- a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt +++ b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/vi_VN/installing-boot9strap-(soundhax).txt b/_pages/vi_VN/installing-boot9strap-(soundhax).txt index d9c13f9bc7..b94e84c610 100644 --- a/_pages/vi_VN/installing-boot9strap-(soundhax).txt +++ b/_pages/vi_VN/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. When prompted, input the key combo given on the top screen to install boot9strap 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot + If you get an error, just continue to the next page diff --git a/_pages/vi_VN/installing-boot9strap-(usm).txt b/_pages/vi_VN/installing-boot9strap-(usm).txt index c706e3641d..58be815045 100644 --- a/_pages/vi_VN/installing-boot9strap-(usm).txt +++ b/_pages/vi_VN/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. Once it is complete, press (A) to reboot your device 1. Your device should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. Press (Start) to save and reboot diff --git a/_pages/vi_VN/troubleshooting.txt b/_pages/vi_VN/troubleshooting.txt index 3cb548dda5..ca8c4d8017 100644 --- a/_pages/vi_VN/troubleshooting.txt +++ b/_pages/vi_VN/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) and place it on the root of your SD card. Do not add the `.bin` extension if you do not already see it. +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. Do not add the `.bin` extension if you do not already see it. ### "An exception occurred" or Errdisp when opening Picross diff --git a/_pages/vi_VN/updating-b9s.txt b/_pages/vi_VN/updating-b9s.txt index f105ea0204..e08d20a2fd 100644 --- a/_pages/vi_VN/updating-b9s.txt +++ b/_pages/vi_VN/updating-b9s.txt @@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Reinsert your SD card into your device 1. Power on your device 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/zh_CN/a9lh-to-b9s.txt b/_pages/zh_CN/a9lh-to-b9s.txt index 701dfa0a67..de85650982 100644 --- a/_pages/zh_CN/a9lh-to-b9s.txt +++ b/_pages/zh_CN/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ title: "A9LH 升级 B9S" 1. 出现提示时，按照提示输入按键来安装 boot9strap 1. 安装完成后，按下 “A” 键重启主机 1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + 如果重启后一直黑屏，请参考[故障排查](troubleshooting#boot-related-issues-on-modded-devices) 1. 按下 “Start” 键保存设置并重启 diff --git a/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt b/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt index 46807a7a74..7138210ab1 100644 --- a/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt +++ b/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ title: "BannerBomb3 + Fredtool（仅港台版）" 一旦你得到了 DSiWare 备份，我们将把一个写入了漏洞的 DSiWare 程序注入到“DS 下载通信”程序中，用来安装自制固件。 -这些操作**仅限**港台版主机使用！（系统版本号末尾为 T ，如 11.16.0-39T） 如果你的主机不是这个区域的，则请使用[其他的方法](seedminer#下一步)。 +这些操作**仅限**港台版主机使用！（系统版本号末尾为 T ，如 11.16.0-39T） If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### 你需要准备点啥？ @@ -132,19 +132,15 @@ title: "BannerBomb3 + Fredtool（仅港台版）" 1. 一旦下屏显示 “done.” ，那么安装就已经完成了。退出b9stool ，然后关机 + 你可能需要长按电源键强制关机 + 如果你的主机在你尝试开机后自动关机了，请确认你已经从 Luma3DS `.zip` 中复制了 `boot.firm` 文件到你的 SD 卡根目录中 - + 如果你看到主机显示了 Luma 配置菜单，请按下 START 键重启然后继续教程 + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### 第六步 – 验证 Luma3DS +#### Section VI - Luma3DS Configuration -1. 将主机关机 -1. 将你的 SD 卡插入到电脑 -1. 检查 `luma` 文件夹是否存在，再检查里面是否有 `config.ini` 文件。 - + 这些文件夹和文件的存在可证实 Luma3DS 已安装 - + 如果你没看到 `luma` 文件夹或 `config.ini`，[请参见此故障排查章节](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -这时，你的主机默认将会自动启动 Luma3DS。 - + Luma3DS 不会给正常的主菜单增添任何看上去十分特别的东西。 如果你的主机现在已经启动到主菜单了，说明自制固件已经在运行了。 - + 在下一页中，我们将会教你安装一些有用的自制程序来完成安装步骤。 +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. 按下 “Start” 键保存设置并重启 #### 第七步 – 还原“DS下载遊戲”程序 diff --git a/_pages/zh_CN/faq.txt b/_pages/zh_CN/faq.txt index 58067adacc..d6dd9aa5fc 100644 --- a/_pages/zh_CN/faq.txt +++ b/_pages/zh_CN/faq.txt @@ -4,11 +4,10 @@ title: "常见问题" {% include toc title="目录"%} {% capture notice-6 %} -**3DS的系统固件已于最近更新至11.16.0**。 以下是一些你应该知道的事情： +**The latest 3DS firmware is 11.16.0**. 以下是一些你应该知道的事情： - 如果你的主机正在使用的 Luma 版本为 **11.0**，那么升级系统是 **100%** 安全的。 你可以在关机状态下按住 SELECT 键，然后按下电源键开机以检查主机的 Luma 版本。 - 如果你的主机运行的 Luma 低于此版本，则你应该在更新系统到 11.16.0 前先[更新 Luma](checking-for-cfw)。 -- 如果你的主机还没安装好自制固件，则你可以继续安装它且不需要任何额外的外设，不过推荐的方法有所更改。 {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/zh_CN/home.txt b/_pages/zh_CN/home.txt index ace74a636d..81c9143a84 100644 --- a/_pages/zh_CN/home.txt +++ b/_pages/zh_CN/home.txt @@ -9,16 +9,6 @@ header: excerpt: "最完整的 3DS 破解手册，
教你从原版主机破解成boot9strap。
" --- -{% capture notice-6 %} -**3DS 的系统固件已于最近更新至 11.16.0**。 以下是一些你应该知道的事情： - -- 如果你的主机正在使用的 Luma 版本为 **11.0**，那么升级系统是 **100%** 安全的。 你可以在关机状态下按住 SELECT 键，然后按下电源键开机以检查主机的 Luma 版本。 -- 如果你的主机运行的 Luma 低于此版本，则你应该在更新系统到 11.16.0 前先[更新 Luma](checking-for-cfw)。 -- 如果你的主机还没安装好自制固件，则你可以继续安装它且不需要任何额外的外设，不过推荐的方法有所更改。 -{% endcapture %} - -
{{ notice-6 | markdownify }}
- 请在开始操作前仔细阅读所有步骤页面（包括这个页面）。 {: .notice--info} diff --git a/_pages/zh_CN/installing-boot9strap-(fredtool).txt b/_pages/zh_CN/installing-boot9strap-(fredtool).txt index 8545698e2c..1cba695edf 100644 --- a/_pages/zh_CN/installing-boot9strap-(fredtool).txt +++ b/_pages/zh_CN/installing-boot9strap-(fredtool).txt @@ -71,7 +71,7 @@ title: "安装 boot9strap（通过 Fredtool）" + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去 1. 复制 `boot.nds` （B9STool）到你的 SD 卡根目录 1. 从 Frogminer_save `.zip` 压缩包中复制 `private` 文件夹到内存卡的根目录 -1. 将SD卡重新插入你的主机 +1. 将 SD 卡重新插入你的主机 1. 启动你的主机 ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }}) @@ -113,17 +113,15 @@ title: "安装 boot9strap（通过 Fredtool）" 1. 一旦下屏显示 “done.” ，那么安装就已经完成了。退出b9stool ，然后关机 + 你可能需要长按电源键强制关机 + 如果你的主机在你尝试开机后自动关机了，请确认你已经从 Luma3DS `.zip` 中复制了 `boot.firm` 文件到你的 SD 卡根目录中 - + 如果你看到主机显示了 Luma 配置菜单，请按下 START 键重启然后继续教程 + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### 第六步 – 验证 Luma3DS +#### Section VI - Luma3DS Configuration -由于这个漏洞的性质，有很小的概率导致 boot9strap 没有实际安装成功。 因此，本节将会通过查看 Luma3DS 是否正常自动创建了一些文件来判断 boot9strap 是否已正确安装。 - -1. 将主机关机 -1. 将你的 SD 卡插入到电脑 -1. 检查 `luma` 文件夹是否存在，再检查里面是否有 `config.ini` 文件。 - + 这些文件夹和文件的存在可证实 Luma3DS 已安装 - + 如果你没看到 `luma` 文件夹或 `config.ini`，[请参见此故障排查章节](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. 按下 “Start” 键保存设置并重启 这时，你的主机默认将会自动启动 Luma3DS。 + Luma3DS 不会给正常的主菜单增添任何看上去十分特别的东西。 如果你的主机现在已经启动到主菜单了，说明自制固件已经在运行了。 diff --git a/_pages/zh_CN/installing-boot9strap-(hardmod).txt b/_pages/zh_CN/installing-boot9strap-(hardmod).txt index 6989d02abf..590f88ad1a 100644 --- a/_pages/zh_CN/installing-boot9strap-(hardmod).txt +++ b/_pages/zh_CN/installing-boot9strap-(hardmod).txt @@ -90,10 +90,12 @@ title: "安装 boot9strap（通过硬改）" + Windows用户：请运行 `install-b9s.exe` 程序 + Mac and Linux用户：请运行 `install-b9s.py` 文件 1. 通过硬改刷入刚生成的 `NAND-patched.bin` 文件至你的主机 -1. 关闭你的主机 +1. 将主机关机 1. 移除你的硬改 1. 启动你的主机 1. 你的主机应该会在重新启动后进入 Luma3DS 配置菜单 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + 如果你的主机在你尝试开机后自动关机了，请确认你已经从 Luma3DS `.zip` 中复制了 `boot.firm` 文件到你的 SD 卡根目录中 1. 按下 “Start” 键保存设置并重启 + 如果出现错误，继续至下一个页面即可解决 diff --git a/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt b/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt index 9775c1fe66..2509de506e 100644 --- a/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt +++ b/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ title: "安装 boot9strap（通过 HBL-USM）" + 如果上屏白屏，则请强制关机然后重做第三步 1. 安装完成后，按下 “A” 键重启主机 1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + 如果你的主机在你尝试开机后自动关机了，请确认你已经从 Luma3DS `.zip` 中复制了 `boot.firm` 文件到你的 SD 卡根目录中 1. 按下 “Start” 键保存设置并重启 diff --git a/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt b/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt index f473d510e3..ea567a3598 100644 --- a/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt +++ b/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ title: "安装 boot9strap（通过 kartdlphax）" 1. 出现提示时，按照上屏的提示输入按键组合来安装 boot9strap + 如果上屏白屏，则请强制关机然后重做第三步 1. 安装完成后，按下 “A” 键重启主机 -1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + 如果你的主机在你尝试开机后自动关机了，请确认你已经从 Luma3DS `.zip` 中复制了 `boot.firm` 文件到你的 SD 卡根目录中 1. 按下 “Start” 键保存设置并重启 diff --git a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt index 826b05bb86..0b730b7ac8 100644 --- a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt +++ b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ title: "安装boot9strap (通过 ntrboot)" 1. 将SD卡重新插入你的主机 1. 启动你的主机 1. 你的主机应该会在开机后进入 Luma3DS 配置菜单 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + 如果你的主机在你尝试开机后自动关机了，请确认你已经从 Luma3DS `.zip` 中复制了 `boot.firm` 文件到你的 SD 卡根目录中 1. 按下 “Start” 键保存设置并重启 + 如果出现错误，继续至下一个页面即可解决 @@ -130,7 +132,7 @@ ___ 1. 从烧录卡备份 `.zip` 压缩包中复制 `.bin` 文件到你的 SD 卡的 `/ntrboot/` 文件夹 1. 在SD卡的 `luma` 文件夹里创建 `payloads` 文件夹 1. 复制 `ntrboot_flasher.firm` 到 SD 卡的 `/luma/payloads/` 文件夹中 -1. 将 SD 卡重新插入你的主机 +1. 将SD卡重新插入你的主机 1. 把兼容 ntrboot 的 DS / DSi 烧录卡插入主机 1. 开机时按住 “Start” 键启动 ntrboot_flasher 1. 请仔细阅读警告信息 diff --git a/_pages/zh_CN/installing-boot9strap-(soundhax).txt b/_pages/zh_CN/installing-boot9strap-(soundhax).txt index ee9f0d74dc..b99db930f0 100644 --- a/_pages/zh_CN/installing-boot9strap-(soundhax).txt +++ b/_pages/zh_CN/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ Soundhax（和 universal-otherapp 一起使用时）与所有区域 1.0.0 至 11 1. 出现提示时，按照上屏的提示输入按键组合来安装 boot9strap 1. 安装完成后，按下 “A” 键重启主机 1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + 如果你的主机在你尝试开机后自动关机了，请确认你已经从 Luma3DS `.zip` 中复制了 `boot.firm` 文件到你的 SD 卡根目录中 1. 按下 “Start” 键保存设置并重启 + 如果出现错误，继续至下一个页面即可解决 diff --git a/_pages/zh_CN/installing-boot9strap-(usm).txt b/_pages/zh_CN/installing-boot9strap-(usm).txt index 86367b5fd3..7ac1476cfc 100644 --- a/_pages/zh_CN/installing-boot9strap-(usm).txt +++ b/_pages/zh_CN/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ title: "安装 boot9strap（通过 USM）" + 如果上屏白屏，则请强制关机然后重做第三步 1. 安装完成后，按下 “A” 键重启主机 1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + 如果你的主机在你尝试开机后自动关机了，请确认你已经从 Luma3DS `.zip` 中复制了 `boot.firm` 文件到你的 SD 卡根目录中 1. 按下 “Start” 键保存设置并重启 diff --git a/_pages/zh_CN/troubleshooting.txt b/_pages/zh_CN/troubleshooting.txt index c8d755ed7c..b783448cfc 100644 --- a/_pages/zh_CN/troubleshooting.txt +++ b/_pages/zh_CN/troubleshooting.txt @@ -70,7 +70,7 @@ title: "问题排查" 你可能把 `00000001.sav` 和（或者） `otherapp.bin` 文件的位置搞错了。 确保 `00000001.sav` 放在了 `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` 中，`otherapp.bin` 放在了 SD 卡的根目录中。 -如果你确定一切都在正确的位置上了，那就尝试重新用 [PicHaxx 存档工具](https://3dstools.nhnarwhal.com/#/pichaxx)创建一份存档，然后把要求的文件重新放到 `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` 中。 确保它是用你主机的 `movable.sed` 文件创建的，且文件已经准确命名为了 `00000001.sav`。 重新下载最新版本的 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) 并将其放在你 SD 卡的根目录中。 如果你下到的东西看不到 `.bin` 后缀，请不要重命名它。 +如果你确定一切都在正确的位置上了，那就尝试重新用 [PicHaxx 存档工具](https://3dstools.nhnarwhal.com/#/pichaxx)创建一份存档，然后把要求的文件重新放到 `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` 中。 确保它是用你主机的 `movable.sed` 文件创建的，且文件已经准确命名为了 `00000001.sav`。 Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. 如果你下到的东西看不到 `.bin` 后缀，请不要重命名它。 ### 打开 Picross 时显示了 “An exception occurred” 或 Errdisp 报错 @@ -412,7 +412,7 @@ ARM11 异常处理器已被禁用，或主机未安装自制固件。 尝试启 ### 清除主菜单的外部存储文件 -1. 将主机关机 +1. 关闭你的主机的电源 1. 将你的 SD 卡插入到电脑 1. 打开你 SD 卡的 `/Nintendo 3DS///extdata/00000000/` 文件夹 1. 删除对应你的 3DS 区域的文件夹： @@ -422,7 +422,7 @@ ARM11 异常处理器已被禁用，或主机未安装自制固件。 尝试启 + **中国版（神游版）**: `000000A1` + **韩版**: `000000A9` + **台湾版**: `000000B1` -1. 将 SD 卡重新插入你的主机 +1. 将SD卡重新插入你的主机 ### 清除主菜单的主题数据 diff --git a/_pages/zh_CN/updating-b9s.txt b/_pages/zh_CN/updating-b9s.txt index f6d466c3cb..4103cd76d2 100644 --- a/_pages/zh_CN/updating-b9s.txt +++ b/_pages/zh_CN/updating-b9s.txt @@ -46,11 +46,13 @@ title: "更新 B9S" #### 第三步 – 升级 Luma3DS -1. 将你的 SD 卡插入到电脑 +1. 将 SD 卡插入电脑 1. 解压 Luma3DS `.zip` 内的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录，覆盖已有文件 1. 将 SD 卡重新插入你的主机 1. 启动你的主机 1. 如果你的主机开机后进入了 Luma3DS 的配置菜单，请直接按下 START 键保存并启动系统 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___ diff --git a/_pages/zh_TW/a9lh-to-b9s.txt b/_pages/zh_TW/a9lh-to-b9s.txt index e198b8cf36..bfe7515748 100644 --- a/_pages/zh_TW/a9lh-to-b9s.txt +++ b/_pages/zh_TW/a9lh-to-b9s.txt @@ -62,6 +62,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. 出現提示時，輸入提示的按鍵組合以安裝 boot9strap 1. 過程結束後，按下『A』重啟主機 1. 您的主機將會重啟至 Luma3DS 設定選單中 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + 如果遇到黑屏，[請參見此疑難排解](troubleshooting#boot-related-issues-on-modded-devices) 1. 按『Start』鍵以存檔並重新啟動系統 diff --git a/_pages/zh_TW/bannerbomb3-fredtool-(twn).txt b/_pages/zh_TW/bannerbomb3-fredtool-(twn).txt index 5190ee5a10..db40a31bc4 100644 --- a/_pages/zh_TW/bannerbomb3-fredtool-(twn).txt +++ b/_pages/zh_TW/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ title: "BannerBomb3 + Fredtool (僅限臺版主機)" Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! 如果您的主機為其他區域的主機，請使用[其他方式](seedminer#next-steps) 進行改機。 +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3). {: .notice--warning} ### 必備項目 @@ -132,19 +132,15 @@ These instructions are for Taiwanese consoles ONLY (as indicated by a T at the e 1. 一旦下方螢幕提示『done.』，則代表已經完成，退出 b9stool 並關閉主機 + 您可能得按住電源紐強制關機 + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -1. 關閉您的主機 -1. 將 SD 卡插入至電腦中 -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) - -At this point, your console will boot to Luma3DS by default. - + Luma3DS 不會特別在 HOME 主選單中新增任何特別的東西。 如果你的主機已經啟動到了 HOME 主選單，這代表自製韌體已經在運行了。 - + On the next page, you will install useful homebrew applications to complete your setup. +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. 按『Start』鍵以存檔並重新啟動系統 ##### 第七節 — 還原『下載通信(Download Play)』程式 diff --git a/_pages/zh_TW/faq.txt b/_pages/zh_TW/faq.txt index e0e08c80ae..3ab23fed9d 100644 --- a/_pages/zh_TW/faq.txt +++ b/_pages/zh_TW/faq.txt @@ -4,11 +4,10 @@ title: "常見問題 FAQ" {% include toc title="條目內容" %} {% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. 以下是你該知道的： +**The latest 3DS firmware is 11.16.0**. 以下是你該知道的： - If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. - If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/zh_TW/home.txt b/_pages/zh_TW/home.txt index aaba0e3283..8537211157 100644 --- a/_pages/zh_TW/home.txt +++ b/_pages/zh_TW/home.txt @@ -9,16 +9,6 @@ header: excerpt: "最完整的 3DS 改機教戰手冊，
教您如何從原廠主機改成 boot9strap。
" --- -{% capture notice-6 %} -**3DS firmware 11.16.0 was recently released**. 以下是你該知道的： - -- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. -- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. -- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. -{% endcapture %} - -
{{ notice-6 | markdownify }}
- 請在繼續前讀完所有的前言頁面 (包括本頁！)。 {: .notice--info} diff --git a/_pages/zh_TW/installing-boot9strap-(fredtool).txt b/_pages/zh_TW/installing-boot9strap-(fredtool).txt index 2f3a3cb2d8..206db7de8a 100644 --- a/_pages/zh_TW/installing-boot9strap-(fredtool).txt +++ b/_pages/zh_TW/installing-boot9strap-(fredtool).txt @@ -113,17 +113,15 @@ In this section, you will perform a series of very specific steps within Flipnot 1. 一旦下方螢幕提示『done.』，那麼就已經完成了，退出 b9stool 並關閉主機 + 您可能得按住電源紐強制關機 + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card - + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide + + If you see the Luma Configuration screen, power off your device and continue to the next section -#### Section VI - Luma3DS Verification +#### Section VI - Luma3DS Configuration -Due to the nature of the exploit used, it is occasionally (but rarely) possible for boot9strap to not actually get installed. This section will therefore verify that boot9strap was successfully installed by seeing if some files that are normally automatically generated by Luma3DS were created. - -1. 關閉您的主機 -1. 將 SD 卡插入至電腦中 -1. Verify that a `luma` folder exists and that `config.ini` is inside of it - + The existence of these folders and files confirms that Luma3DS is installed - + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. 按『Start』鍵以存檔並重新啟動系統 At this point, your console will boot to Luma3DS by default. + Luma3DS 不會特別在 HOME 主選單中新增任何特別的東西。 如果你的主機已經啟動到了 HOME 主選單，這代表自製韌體已經在運行了。 diff --git a/_pages/zh_TW/installing-boot9strap-(hardmod).txt b/_pages/zh_TW/installing-boot9strap-(hardmod).txt index 2c75628722..92f98e789e 100644 --- a/_pages/zh_TW/installing-boot9strap-(hardmod).txt +++ b/_pages/zh_TW/installing-boot9strap-(hardmod).txt @@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and 1. 移除您的硬改 1. 啟動您的主機 1. 您的主機將會啟動至 Luma3DS 設定選單中 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. 按『Start』鍵以存檔並重新啟動系統 + 如果您遇到了錯誤訊息，繼續到下一頁即可 diff --git a/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt b/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt index 4775e9ebc8..4cf180e56f 100644 --- a/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt +++ b/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt @@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. 過程結束後，按下『A』重啟主機 1. 您的主機將會重啟至 Luma3DS 設定選單中 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. 按『Start』鍵以存檔並重新啟動系統 diff --git a/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt b/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt index 3f14728b1e..d85c153099 100644 --- a/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt +++ b/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt @@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device. 1. 出現提示時，輸入上方螢幕所顯示的按鍵組合以安裝 boot9strap + If the top screen is blank, power off your device and re-do Section III 1. 過程結束後，按下『A』重啟主機 -1. 您的主機將會重啟至 Luma3DS 設定選單中 +1. Your target 3DS should have rebooted into the Luma3DS configuration menu + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. 按『Start』鍵以存檔並重新啟動系統 diff --git a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt index 35b998617c..b676640a5b 100644 --- a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt +++ b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt @@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. 將 SD 卡插回主機中 1. 啟動您的主機 1. 您的主機將會啟動至 Luma3DS 設定選單中 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. 按『Start』鍵以存檔並重新啟動系統 + 如果您遇到了錯誤訊息，繼續到下一頁即可 diff --git a/_pages/zh_TW/installing-boot9strap-(soundhax).txt b/_pages/zh_TW/installing-boot9strap-(soundhax).txt index 4aee47065c..ff2a2fdb27 100644 --- a/_pages/zh_TW/installing-boot9strap-(soundhax).txt +++ b/_pages/zh_TW/installing-boot9strap-(soundhax).txt @@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device. 1. 出現提示時，輸入上方螢幕所顯示的按鍵組合以安裝 boot9strap 1. 過程結束後，按下『A』重啟主機 1. 您的主機將會重啟至 Luma3DS 設定選單中 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. 按『Start』鍵以存檔並重新啟動系統 + 如果您遇到了錯誤訊息，繼續到下一頁即可 diff --git a/_pages/zh_TW/installing-boot9strap-(usm).txt b/_pages/zh_TW/installing-boot9strap-(usm).txt index 30257914cf..d74c47c152 100644 --- a/_pages/zh_TW/installing-boot9strap-(usm).txt +++ b/_pages/zh_TW/installing-boot9strap-(usm).txt @@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device. + If the top screen is blank, power off your device and re-do Section III 1. 過程結束後，按下『A』重啟主機 1. 您的主機將會重啟至 Luma3DS 設定選單中 + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card 1. 按『Start』鍵以存檔並重新啟動系統 diff --git a/_pages/zh_TW/troubleshooting.txt b/_pages/zh_TW/troubleshooting.txt index 339f18e509..fd36db8bb6 100644 --- a/_pages/zh_TW/troubleshooting.txt +++ b/_pages/zh_TW/troubleshooting.txt @@ -70,7 +70,7 @@ The website has determined that your `movable.sed` cannot be brute-forced. Ensur Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card. -If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. 確保它是用你主機的 `movable.sed` 檔案建立的，且檔案已經準確命名為了 `00000001.sav`。 重新下載最新版本的 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) 並將其放在你 SD 卡的根目錄中。 如果您的電腦沒有顯示 `.bin` 的副檔名，請勿手動新增。 +If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data`. 確保它是用你主機的 `movable.sed` 檔案建立的，且檔案已經準確命名為了 `00000001.sav`。 Re-download the latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest), place the `.bin` file relevant to your console from the `otherapps_with_CfgS` folder to the root of your SD card, and rename it to `otherapp.bin`. 如果您的電腦沒有顯示 `.bin` 的副檔名，請勿手動新增。 ### 打開 Picross 時顯示了「An exception occurred」或 Errdisp 的錯誤訊息 diff --git a/_pages/zh_TW/updating-b9s.txt b/_pages/zh_TW/updating-b9s.txt index 54091587af..00e576ac48 100644 --- a/_pages/zh_TW/updating-b9s.txt +++ b/_pages/zh_TW/updating-b9s.txt @@ -51,6 +51,8 @@ title: "更新 B9S" # 1. 將 SD 卡插回主機中 1. 啟動您的主機 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot + + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging + + For the purpose of this guide, these settings will be left on default settings ___