_sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ Nämä varmuuskopiot pelastavat sinut konsolin vioittumiselta ja/tai auttavat palauttamaan tiedostoja NAND-näköistiedostosta, jos jokin menee pieleen tulevaisuudessa
1. Kun olet varmuuskopioinut NANDin, poista `__sysnand_###.bin` ja `__sysnand_###.bin.sha` SD-korttisi `/gm9/out/`-kansiosta
+ + The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Aseta SD-korttisi takaisin konsoliisi
1. Käynnistä konsolisi
diff --git a/_pages/fi_FI/installing-boot9strap-(fredtool).txt b/_pages/fi_FI/installing-boot9strap-(fredtool).txt
index 3443a6bea0..336eac0a6a 100644
--- a/_pages/fi_FI/installing-boot9strap-(fredtool).txt
+++ b/_pages/fi_FI/installing-boot9strap-(fredtool).txt
@@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ Voit joutua pakottamaan konsolin sammuksiin pitämällä virtapainiketta pohjassa
- + If you see the Luma Configuration screen, continue with the guide without powering off
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### Section V - Configuring Luma3DS
-
-1. Käynnistä konsolisi pitäen (SELECT)-painiketta pohjassa avataksesi Luman määritysvalikon
- + If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
- + **"Show NAND or user string in System Settings"**
-1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
-
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
- + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-
-#### Section VI - Restoring DS Connection Settings
+#### Section V - Luma3DS Verification
1. Sammuta konsolisi
1. Aseta SD-korttisi tietokoneeseesi
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### Section VI - Restoring DS Connection Settings
+
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Aseta SD-korttisi takaisin konsoliisi
diff --git a/_pages/fi_FI/installing-boot9strap-(hardmod).txt b/_pages/fi_FI/installing-boot9strap-(hardmod).txt
index 7bb9594c58..3a9b8fc37d 100644
--- a/_pages/fi_FI/installing-boot9strap-(hardmod).txt
+++ b/_pages/fi_FI/installing-boot9strap-(hardmod).txt
@@ -83,19 +83,14 @@ Tämä toimii *kaikilla* versioilla New 3DS:llä, New 2DS:llä, vanhalla 3DS:ll
1. Sammuta konsolisi
1. Irrota laitteistomodauksesi
1. Käynnistä konsolisi
-
-#### Vaihe III – Luma3DS:n määrittäminen
-
1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
___
diff --git a/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt b/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt
index c2e57ef460..ca9bfdc8d5 100644
--- a/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt
@@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
-#### Section IV - SafeB9SInstaller
+#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section V - Configuring Luma3DS
-
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
-1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
- - **"Show NAND or user string in System Settings"**
+ + If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___
diff --git a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
index f19473d91c..e73d14aefe 100644
--- a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
+++ b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
@@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Aseta SD-korttisi takaisin konsoliisi
1. Käynnistä konsolisi
1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/fi_FI/installing-boot9strap-(pichaxx).txt b/_pages/fi_FI/installing-boot9strap-(pichaxx).txt
index b5b97964a0..ffda013e9d 100644
--- a/_pages/fi_FI/installing-boot9strap-(pichaxx).txt
+++ b/_pages/fi_FI/installing-boot9strap-(pichaxx).txt
@@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
-
-#### Vaihe IV – Luma3DS:n määrittäminen
-
1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}
diff --git a/_pages/fi_FI/installing-boot9strap-(safeb9sinstaller).txt b/_pages/fi_FI/installing-boot9strap-(safeb9sinstaller).txt
index 831599bff4..eb0fa723b5 100644
--- a/_pages/fi_FI/installing-boot9strap-(safeb9sinstaller).txt
+++ b/_pages/fi_FI/installing-boot9strap-(safeb9sinstaller).txt
@@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Vaihe III – Luma3DS:n määrittäminen
-
1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/fi_FI/installing-boot9strap-(soundhax).txt b/_pages/fi_FI/installing-boot9strap-(soundhax).txt
index 0ca0134db5..8bdc80a7ed 100644
--- a/_pages/fi_FI/installing-boot9strap-(soundhax).txt
+++ b/_pages/fi_FI/installing-boot9strap-(soundhax).txt
@@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Vaihe IV – Luma3DS:n määrittäminen
-
1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/fi_FI/installing-boot9strap-(usm).txt b/_pages/fi_FI/installing-boot9strap-(usm).txt
index fd99127121..f031629c8c 100644
--- a/_pages/fi_FI/installing-boot9strap-(usm).txt
+++ b/_pages/fi_FI/installing-boot9strap-(usm).txt
@@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
-
-#### Section V - Configuring Luma3DS
-
1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/fi_FI/restoring-updating-cfw.txt b/_pages/fi_FI/restoring-updating-cfw.txt
index 4655febe85..773d0df13a 100644
--- a/_pages/fi_FI/restoring-updating-cfw.txt
+++ b/_pages/fi_FI/restoring-updating-cfw.txt
@@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### Tarpeet
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Ohjeet
-#### Vaihe I – Valmistelut
-
1. Aseta SD-korttisi tietokoneeseesi
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. Aseta SD-korttisi takaisin konsoliisi
+1. Käynnistä konsolisi
+ + If you see the Luma3DS configuration menu, press (Start) to save and reboot
-#### Section II - Configuring Luma3DS
-
-1. Press and hold (Select), and while holding (Select), power on your device
- * You should now see a Luma3DS configuration menu
-1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
- * **"Show NAND or user string in System Settings"**
-1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
-
-#### Section III - CTRNAND Luma3DS
-
-1. Sammuta konsolisi
-1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
- + If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
-1. Jos sinua kehotetaan korjaamaan RTC-aika ja -päivämäärä, paina (A):ta ja aseta ne oikein, paina sitten (A):ta jatkaaksesi
-1. Paina (HOME)-painiketta näyttääksesi toimintovalikon
-1. Select "Scripts..."
-1. Select "GM9Megascript"
-1. Select "Scripts from Plailect's Guide"
-1. Select "Setup Luma3DS to CTRNAND"
- + This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
-1. Paina kehotettaessa (A):ta jatkaaksesi
-1. Paina (A):ta ottaaksesi käyttöön SysNANDiin kirjoittamisen (lvl1) ja syötä annettu painikeyhdistelmä
-1. Paina (A):ta jatkaaksesi
-1. Press (B), then navigate to "Exit" to exit GM9Megascript
- + When prompted, relock write permissions
-1. Paina (HOME)-painiketta näyttääksesi toimintovalikon
-1. Select "Poweroff system" to power off your device
-
-The latest version of Luma3DS has been installed on your SD card and on internal memory.
+The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___
diff --git a/_pages/fi_FI/updating-b9s.txt b/_pages/fi_FI/updating-b9s.txt
index 43e40ffbca..1b212c8ad0 100644
--- a/_pages/fi_FI/updating-b9s.txt
+++ b/_pages/fi_FI/updating-b9s.txt
@@ -50,15 +50,7 @@ Korvaa mahdolliset olemassa olevat tiedostot SD-kortillasi kaikissa tämän vaih
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Aseta SD-korttisi takaisin konsoliisi
1. Käynnistä konsolisi
-
-#### Vaihe IV – Luma3DS:n määrittäminen
-
-Tämä vaihe on tarpeellinen vain, jos Luma3DS-määritysvalikko näkyy uudelleenkäynnistyksen jälkeen.
-{: .notice--info}
-
-1. Käytä määritysvalikossa (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
- + **"Show NAND or user string in System Settings"**
-1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
+1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___
diff --git a/_pages/fr_FR/a9lh-to-b9s.txt b/_pages/fr_FR/a9lh-to-b9s.txt
index 4835b4140a..50706a9761 100644
--- a/_pages/fr_FR/a9lh-to-b9s.txt
+++ b/_pages/fr_FR/a9lh-to-b9s.txt
@@ -63,12 +63,8 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants
+ Si vous obtenez une erreur "OTP Crypto Fail", télécharger - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. Quand cela est demandé, appuyez sur la combinaison de boutons donnée pour installer boot9strap
1. Once it is complete, press (A) to reboot your device
- + Si votre appareil s’éteint au démarrage, assurez-vous que vous avez copié `boot.firm` du fichier `.zip` de Luma3DS à la racine de votre carte SD
-
-#### Section III - Configuration de Luma3DS
-
-1. Dans le menu de configuration Luma3DS, utilisez le bouton (A) et le D-Pad pour configurer l'option suivante :
- + **"Show NAND or user string in System Settings"**
+1. Votre console va redémarrer dans la configuration de Luma3DS
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
___
diff --git a/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt b/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt
index f342b177d7..e8d642eba8 100644
--- a/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt
+++ b/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt
@@ -125,21 +125,23 @@ Si vous préférez un guide visuel pour cette section, un tel guide est disponib
1. Appuyez sur (A), puis appuyez sur START et SELECT en même temps pour démarrer le processus
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé
- + Si vous voyez l'écran de configuration de Luma, continuez de suivre le guide sans éteindre la console
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### Section VI - Configuring Luma3DS
-
-1. Démarrez la console en maintenant (Select) enfoncé pour accéder au menu de configuration de Luma3DS
- + If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
- + If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
-1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
- + “Show NAND or user string in System Settings”
-1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-#### Section VII - Restoring DS Download Play
+#### Section VI - Luma3DS Verification
1. Éteignez votre 3DS
1. Insérez votre carte SD dans votre ordinateur
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### Section VII - Restoring DS Download Play
+
1. Naviguez vers `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` sur votre carte SD
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Réinsérez votre carte SD dans votre 3DS
diff --git a/_pages/fr_FR/finalizing-setup.txt b/_pages/fr_FR/finalizing-setup.txt
index 504d44ab81..cb5487620a 100644
--- a/_pages/fr_FR/finalizing-setup.txt
+++ b/_pages/fr_FR/finalizing-setup.txt
@@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ Si une erreur apparaît, vérifiez que vous avez au moins 1,3 Go d'espace libre sur votre carte SD
1. Appuyez sur (A) pour continuer
1. Appuyez sur (B) pour revenir au menu principal
-1. Sélectionnez "Dump Options"
-1. Sélectionnez "Dump Boot9.bin & Boot11.bin"
-1. Lorsque vous êtes invité, appuyez sur (A)
-1. Appuyez sur (A) pour continuer
-1. Appuyez sur (B) pour revenir au menu principal
1. Sélectionnez "Exit"
1. Appuyez (A) pour reverrouiller autorisations en écriture si vous êtes invité
1. Naviguez vers `[S:] SYSNAND VIRTUAL`
@@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)
1. Sélectionnez "Poweroff system" pour éteindre votre appareil
1. Insérez votre carte SD dans votre ordinateur
-1. Copiez `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs`, `_boot9_###. dans`, et `_boot11_###.bin` depuis le dossier `/gm9/out/` de votre carte SD vers un emplacement sûr sur votre ordinateur
- + Faites des sauvegardes dans plusieurs endroits (tels que des stockages de fichiers en ligne par exemple)
+1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
+1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
Ces sauvegardes vous sauveront d'un brick et/ou vous aideront à récupérer des fichiers de l'image de la NAND si quelque chose se passe mal plus tard
1. Supprimez `__sysnand_###.bin` et `__sysnand_###.bin.sha` du dossier `/gm9/out/` de votre carte SD après l'avoir copiée
+ + The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Réinsérez votre carte SD dans votre 3DS
1. Allumez votre console
diff --git a/_pages/fr_FR/installing-boot9strap-(fredtool).txt b/_pages/fr_FR/installing-boot9strap-(fredtool).txt
index d2bf132970..533660e56e 100644
--- a/_pages/fr_FR/installing-boot9strap-(fredtool).txt
+++ b/_pages/fr_FR/installing-boot9strap-(fredtool).txt
@@ -86,24 +86,23 @@ Si vous préférez un guide visuel pour cette section, un tel guide est disponib
1. Appuyez sur (A), puis appuyez sur START et SELECT en même temps pour démarrer le processus
1. Une fois que le processus est terminé et que vous voyez le message "done." s'afficher sur l'écran du bas, quittez b9sTool, puis éteignez votre console
+ Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé
- + Si vous voyez l'écran de configuration de Luma, continuez de suivre le guide sans éteindre la console
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### Section V - Configuration de Luma3DS
-
-1. Démarrez la console en maintenant (Select) enfoncé pour accéder au menu de configuration de Luma3DS
- + Si vous rencontrez des problèmes en lançant le menu de configuration de Luma, [suivez ce guide de dépannage](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
- + **"Show NAND or user string in System Settings"**
-1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-À ce stade, votre console démarrera par défaut sur Luma3DS tant que la carte SD sera insérée.
- + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + Sur la page suivante, vous copierez Luma3DS vers la mémoire interne pour que vous puissiez démarrer sans carte SD.
-
-#### Section VI - Restauration des paramètres de Connexions Nintendo DS
+#### Section V - Luma3DS Verification
1. Éteignez votre 3DS
1. Insérez votre carte SD dans votre ordinateur
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### Section VI - Restauration des paramètres de Connexions Nintendo DS
+
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Remplacez le fichier `42383841.bin` existant
1. Réinsérez votre carte SD dans votre 3DS
diff --git a/_pages/fr_FR/installing-boot9strap-(hardmod).txt b/_pages/fr_FR/installing-boot9strap-(hardmod).txt
index 55f9f7b3e4..0bd5f08708 100644
--- a/_pages/fr_FR/installing-boot9strap-(hardmod).txt
+++ b/_pages/fr_FR/installing-boot9strap-(hardmod).txt
@@ -82,19 +82,14 @@ Cela fonctionne sur la New3DS, Old3DS, New 2DS et Old 3DS sur *toutes* les versi
1. Éteignez votre 3DS
1. Déconnectez votre hardmod
1. Allumez votre console
-
-#### Section III - Configuration de Luma3DS
-
1. Votre console va démarrer dans la configuration de Luma3DS
- + Si vous obtenez un écran noir, [suivez ce guide de dépannage](troubleshooting#boot-related-issues-on-modded-devices)
-1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+ If you get an error, just continue to the next page
-À ce stade, votre console démarrera par défaut sur Luma3DS tant que la carte SD sera insérée.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + Sur la page suivante, vous copierez Luma3DS vers la mémoire interne pour que vous puissiez démarrer sans carte SD.
+ + On the next page, you will install useful homebrew applications to complete your setup.
___
diff --git a/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt b/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt
index c636784be5..56e9d06772 100644
--- a/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt
@@ -69,21 +69,17 @@ Sur la **3DS cible** (la 3DS que vous essayez de modifier):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
-#### Section IV - SafeB9SInstaller
+#### Section IV - Installing boot9strap
1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l'écran supérieur pour installer boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section V - Configuration de Luma3DS
-
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
-1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
- - **"Show NAND or user string in System Settings"**
+ + If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-À ce stade, votre console démarrera par défaut sur Luma3DS tant que la carte SD sera insérée.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + Sur la page suivante, vous copierez Luma3DS vers la mémoire interne pour que vous puissiez démarrer sans carte SD.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___
diff --git a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
index b51168a41c..0d79addd18 100644
--- a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
@@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Réinsérez votre carte SD dans votre 3DS
1. Allumez votre console
1. Votre console va démarrer dans la configuration de Luma3DS
- + Si vous obtenez un écran noir, [suivez ce guide de dépannage](troubleshooting#boot-related-issues-on-modded-devices)
-1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+ If you get an error, just continue to the next page
-À ce stade, votre console démarrera par défaut sur Luma3DS tant que la carte SD sera insérée.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + Sur la page suivante, vous copierez Luma3DS vers la mémoire interne pour que vous puissiez démarrer sans carte SD.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/fr_FR/installing-boot9strap-(pichaxx).txt b/_pages/fr_FR/installing-boot9strap-(pichaxx).txt
index c2ed00a07a..06f146bc5f 100644
--- a/_pages/fr_FR/installing-boot9strap-(pichaxx).txt
+++ b/_pages/fr_FR/installing-boot9strap-(pichaxx).txt
@@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l'écran supérieur pour installer boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
-
-#### Section IV - Configuration de Luma3DS
-
1. Votre console va redémarrer dans la configuration de Luma3DS
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + Si vous obtenez un écran noir, [suivez ce guide de dépannage](troubleshooting#boot-related-issues-on-modded-devices)
-1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-À ce stade, votre console démarrera par défaut sur Luma3DS tant que la carte SD sera insérée.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + Sur la page suivante, vous copierez Luma3DS vers la mémoire interne pour que vous puissiez démarrer sans carte SD.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}
diff --git a/_pages/fr_FR/installing-boot9strap-(safeb9sinstaller).txt b/_pages/fr_FR/installing-boot9strap-(safeb9sinstaller).txt
index 9f00037b89..0014a39ef4 100644
--- a/_pages/fr_FR/installing-boot9strap-(safeb9sinstaller).txt
+++ b/_pages/fr_FR/installing-boot9strap-(safeb9sinstaller).txt
@@ -22,19 +22,15 @@ title: "Installation de boot9strap (SafeB9SInstaller)"
1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l'écran supérieur pour installer boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section III - Configuration de Luma3DS
-
1. Votre console va redémarrer dans la configuration de Luma3DS
- + Si vous obtenez un écran noir, [suivez ce guide de dépannage](troubleshooting#boot-related-issues-on-modded-devices)
-1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+ If you get an error, just continue to the next page
-À ce stade, votre console démarrera par défaut sur Luma3DS tant que la carte SD sera insérée.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + Sur la page suivante, vous copierez Luma3DS vers la mémoire interne pour que vous puissiez démarrer sans carte SD.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/fr_FR/installing-boot9strap-(soundhax).txt b/_pages/fr_FR/installing-boot9strap-(soundhax).txt
index 58e89fcf06..a6f4e47a64 100644
--- a/_pages/fr_FR/installing-boot9strap-(soundhax).txt
+++ b/_pages/fr_FR/installing-boot9strap-(soundhax).txt
@@ -60,20 +60,15 @@ Soundhax (quand combiné avec pre9otherapp) est compatible avec les versions com
1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l'écran supérieur pour installer boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section IV - Configuration de Luma3DS
-
1. Votre console va redémarrer dans la configuration de Luma3DS
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + Si vous obtenez un écran noir, [suivez ce guide de dépannage](troubleshooting#boot-related-issues-on-modded-devices)
-1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+ If you get an error, just continue to the next page
-À ce stade, votre console démarrera par défaut sur Luma3DS tant que la carte SD sera insérée.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + Sur la page suivante, vous copierez Luma3DS vers la mémoire interne pour que vous puissiez démarrer sans carte SD.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/fr_FR/installing-boot9strap-(usm).txt b/_pages/fr_FR/installing-boot9strap-(usm).txt
index 90ca973e42..ba0fb5ae97 100644
--- a/_pages/fr_FR/installing-boot9strap-(usm).txt
+++ b/_pages/fr_FR/installing-boot9strap-(usm).txt
@@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l'écran supérieur pour installer boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
-
-#### Section V - Configuration de Luma3DS
-
1. Votre console va redémarrer dans la configuration de Luma3DS
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + Si vous obtenez un écran noir, [suivez ce guide de dépannage](troubleshooting#boot-related-issues-on-modded-devices)
-1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-À ce stade, votre console démarrera par défaut sur Luma3DS tant que la carte SD sera insérée.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + Sur la page suivante, vous copierez Luma3DS vers la mémoire interne pour que vous puissiez démarrer sans carte SD.
+ + On the next page, you will install useful homebrew applications to complete your setup.
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section V - Restoring WiFi Configuration Profiles
1. Lancez les Paramètres de la console
1. Naviguez vers`Gestion des données` -> `DSiWare`
diff --git a/_pages/fr_FR/restoring-updating-cfw.txt b/_pages/fr_FR/restoring-updating-cfw.txt
index 193c51deb6..2bd04418de 100644
--- a/_pages/fr_FR/restoring-updating-cfw.txt
+++ b/_pages/fr_FR/restoring-updating-cfw.txt
@@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
## Ce dont vous avez besoin
* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
-* La dernière version de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Instructions
-#### Section I - Préparatifs
-
1. Insérez votre carte SD dans votre ordinateur
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier
@@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ Si les dossiers `luma` ou `payloads` n'existent pas, créez-les
1. Copiez le dossier `gm9` de l'archive `.zip` de GodMode9 vers la racine de votre carte SD, en le fusionnant avec n'importe quel dossier existant et en remplaçant les fichiers existants
1. Réinsérez votre carte SD dans votre 3DS
+1. Allumez votre console
+ + If you see the Luma3DS configuration menu, press (Start) to save and reboot
-#### Section II - Configuration de Luma3DS
-
-1. Press and hold (Select), and while holding (Select), power on your device
- * Vous devriez maintenant voir le menu de configuration de Luma3DS
-1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
- * **"Show NAND or user string in System Settings"**
-1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-#### Section III - CTRNAND Luma3DS
-
-1. Éteignez votre 3DS
-1. Appuyez sur le bouton (START) et maintenez le enfoncé tout en allumant votre console. Ceci lancera GodMode9
- + If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
-1. Si vous êtes invité à régler la date et l'heure du RTC, appuyez sur (A) pour le faire, puis réglez la date et l'heure, puis appuyez sur (A) pour continuer
-1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)
-1. Sélectionnez "Scripts"
-1. Sélectionnez "GM9Megascript"
-1. Sélectionnez "Scripts from Plailect's Guide"
-1. Sélectionnez "Setup Luma3DS to CTRNAND"
- + Ceci copiera la version mise à jour de Luma3DS vers la mémoire interne pour que votre console puisse démarrer sans qu'une carte SD soit insérée
-1. Lorsque vous êtes invité, appuyez sur (A)
-1. Appuyez sur (A) pour autoriser l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée
-1. Appuyez sur (A) pour continuer
-1. Appuyez sur (B), puis sélectionnez "Exit" pour quitter GM9Megascript
- + Lorsque vous y êtes invité, reverrouillez les permissions d'écriture
-1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)
-1. Sélectionnez "Poweroff system" pour éteindre votre appareil
-
-La dernière version de Luma3DS a été installée sur votre carte SD et sur la mémoire interne.
+The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___
diff --git a/_pages/fr_FR/updating-b9s.txt b/_pages/fr_FR/updating-b9s.txt
index aad2a63b8e..ef8af265c5 100644
--- a/_pages/fr_FR/updating-b9s.txt
+++ b/_pages/fr_FR/updating-b9s.txt
@@ -50,15 +50,7 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants
1. Copiez les fichiers `boot.firm` et `boot.3dsx` depuis le fichier `.zip` de Luma3DS vers la racine de votre carte SD, en écrasant le fichier existant si nécessaire
1. Réinsérez votre carte SD dans votre 3DS
1. Allumez votre console
-
-#### Section IV - Configuration de Luma3DS
-
-Cette section est nécessaire uniquement si le menu de configuration de Luma3DS s'affiche après le redémarrage.
-{: .notice--info}
-
-1. Dans le menu de configuration Luma3DS, utilisez le bouton (A) et le D-Pad pour configurer l'option suivante :
- + **"Show NAND or user string in System Settings"**
-1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___
diff --git a/_pages/he_IL/a9lh-to-b9s.txt b/_pages/he_IL/a9lh-to-b9s.txt
index 6d3b04ab30..6297b6990c 100644
--- a/_pages/he_IL/a9lh-to-b9s.txt
+++ b/_pages/he_IL/a9lh-to-b9s.txt
@@ -63,12 +63,8 @@ While we believe that custom firmware is safe for online use, there have been on
+ אם אתם מקבלים את השגיאה "OTP Crypto Fail", תורידו את - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. כאשר תתבקשו, תלחצו על הכפתורים שנתונים לכם כדי להתקין את boot9strap
1. Once it is complete, press (A) to reboot your device
- + If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-
-#### חלק III - הגדרת Luma3DS
-
-1. בתפריט ההגדרות של Luma3DS, תשתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- + **"Show NAND or user string in System Settings"**
+1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
___
diff --git a/_pages/he_IL/bannerbomb3-fredtool-(twn).txt b/_pages/he_IL/bannerbomb3-fredtool-(twn).txt
index 0fc414bbf2..5a3acb2b17 100644
--- a/_pages/he_IL/bannerbomb3-fredtool-(twn).txt
+++ b/_pages/he_IL/bannerbomb3-fredtool-(twn).txt
@@ -125,21 +125,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה
- + If you see the Luma Configuration screen, continue with the guide without powering off
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### Section VI - Configuring Luma3DS
-
-1. Boot your device while holding (Select) to launch the Luma configuration menu
- + If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
- + If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
-1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- + “Show NAND or user string in System Settings”
-1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
-
-#### Section VII - Restoring DS Download Play
+#### Section VI - Luma3DS Verification
1. תכבו את המכשיר
1. תכניסו את ה-SD שלכם למחשב
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### Section VII - Restoring DS Download Play
+
1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
diff --git a/_pages/he_IL/finalizing-setup.txt b/_pages/he_IL/finalizing-setup.txt
index ce53481283..fa2650056b 100644
--- a/_pages/he_IL/finalizing-setup.txt
+++ b/_pages/he_IL/finalizing-setup.txt
@@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ If you get an error, make sure that you have at least 1.3GB of free space on your SD card
1. תלחצו (A) כדי להמשיך
1. תלחצו (B) כדי לחזור לתפריט הראשי
-1. Select "Dump Options"
-1. Select "Dump Boot9.bin & Boot11.bin"
-1. כשתתבקשו, תלחצו (A) כדי להמשיך
-1. תלחצו (A) כדי להמשיך
-1. תלחצו (B) כדי לחזור לתפריט הראשי
1. Select "Exit"
1. תלחצו (A) כדי לנעול הרשאות כתיבה אם תתבקשו
1. Navigate to `[S:] SYSNAND VIRTUAL`
@@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. תלחצו על (Home) כדי להראות את תפריט הפעולה
1. Select "Poweroff system" to power off your device
1. תכניסו את ה-SD שלכם למחשב
-1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs`, `_boot9_###.bin`, and `_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
- + תיצרו גיבויים במקומות שונים (כמו אחסון בענן)
+1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
+1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+ + The other backup files are negligible in size and may be kept on your SD card for ease of access
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
1. תפעילו את המכשיר
diff --git a/_pages/he_IL/installing-boot9strap-(fredtool).txt b/_pages/he_IL/installing-boot9strap-(fredtool).txt
index 37916c163c..8cba3b2c43 100644
--- a/_pages/he_IL/installing-boot9strap-(fredtool).txt
+++ b/_pages/he_IL/installing-boot9strap-(fredtool).txt
@@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה
- + If you see the Luma Configuration screen, continue with the guide without powering off
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### Section V - Configuring Luma3DS
-
-1. Boot your device while holding (Select) to launch the Luma configuration menu
- + If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- + **"Show NAND or user string in System Settings"**
-1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
-
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
- + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-
-#### Section VI - Restoring DS Connection Settings
+#### Section V - Luma3DS Verification
1. תכבו את המכשיר
1. תכניסו את ה-SD שלכם למחשב
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### Section VI - Restoring DS Connection Settings
+
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
diff --git a/_pages/he_IL/installing-boot9strap-(hardmod).txt b/_pages/he_IL/installing-boot9strap-(hardmod).txt
index 4f1bf7c5f4..57392e102e 100644
--- a/_pages/he_IL/installing-boot9strap-(hardmod).txt
+++ b/_pages/he_IL/installing-boot9strap-(hardmod).txt
@@ -82,19 +82,14 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
1. תכבו את המכשיר
1. Disconnect your hardmod
1. תפעילו את המכשיר
-
-#### חלק III - הגדרת Luma3DS
-
1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
___
diff --git a/_pages/he_IL/installing-boot9strap-(kartdlphax).txt b/_pages/he_IL/installing-boot9strap-(kartdlphax).txt
index 98dc017b59..8f2a703d68 100644
--- a/_pages/he_IL/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/he_IL/installing-boot9strap-(kartdlphax).txt
@@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
-#### Section IV - SafeB9SInstaller
+#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section V - Configuring Luma3DS
-
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
-1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- - **"Show NAND or user string in System Settings"**
+ + If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___
diff --git a/_pages/he_IL/installing-boot9strap-(ntrboot).txt b/_pages/he_IL/installing-boot9strap-(ntrboot).txt
index e4dd4ca288..b704b0a954 100644
--- a/_pages/he_IL/installing-boot9strap-(ntrboot).txt
+++ b/_pages/he_IL/installing-boot9strap-(ntrboot).txt
@@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
1. תפעילו את המכשיר
1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/he_IL/installing-boot9strap-(pichaxx).txt b/_pages/he_IL/installing-boot9strap-(pichaxx).txt
index 34545312f2..0565e2a433 100644
--- a/_pages/he_IL/installing-boot9strap-(pichaxx).txt
+++ b/_pages/he_IL/installing-boot9strap-(pichaxx).txt
@@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
-
-#### חלק IV - הגדרת Luma3DS
-
1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}
diff --git a/_pages/he_IL/installing-boot9strap-(safeb9sinstaller).txt b/_pages/he_IL/installing-boot9strap-(safeb9sinstaller).txt
index f4e9356477..4c6ffc3d43 100644
--- a/_pages/he_IL/installing-boot9strap-(safeb9sinstaller).txt
+++ b/_pages/he_IL/installing-boot9strap-(safeb9sinstaller).txt
@@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### חלק III - הגדרת Luma3DS
-
1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/he_IL/installing-boot9strap-(soundhax).txt b/_pages/he_IL/installing-boot9strap-(soundhax).txt
index e87fb64187..d109ad2606 100644
--- a/_pages/he_IL/installing-boot9strap-(soundhax).txt
+++ b/_pages/he_IL/installing-boot9strap-(soundhax).txt
@@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### חלק IV - הגדרת Luma3DS
-
1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/he_IL/installing-boot9strap-(usm).txt b/_pages/he_IL/installing-boot9strap-(usm).txt
index 709b89bf89..36667a76d0 100644
--- a/_pages/he_IL/installing-boot9strap-(usm).txt
+++ b/_pages/he_IL/installing-boot9strap-(usm).txt
@@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
-
-#### Section V - Configuring Luma3DS
-
1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/he_IL/restoring-updating-cfw.txt b/_pages/he_IL/restoring-updating-cfw.txt
index 6ae56cdd19..38569887b5 100644
--- a/_pages/he_IL/restoring-updating-cfw.txt
+++ b/_pages/he_IL/restoring-updating-cfw.txt
@@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### What You Need
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### הנחיות
-#### חלק I - הכנות
-
1. תכניסו את ה-SD שלכם למחשב
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
+1. תפעילו את המכשיר
+ + If you see the Luma3DS configuration menu, press (Start) to save and reboot
-#### Section II - Configuring Luma3DS
-
-1. Press and hold (Select), and while holding (Select), power on your device
- * You should now see a Luma3DS configuration menu
-1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- * **"Show NAND or user string in System Settings"**
-1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
-
-#### Section III - CTRNAND Luma3DS
-
-1. תכבו את המכשיר
-1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
- + If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
-1. אם אתם מתבקשים לתקן את זמן ותאריך הRTC, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך
-1. תלחצו על (Home) כדי להראות את תפריט הפעולה
-1. תבחרו "Scripts..."
-1. Select "GM9Megascript"
-1. Select "Scripts from Plailect's Guide"
-1. Select "Setup Luma3DS to CTRNAND"
- + This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
-1. כשתתבקשו, תלחצו (A) כדי להמשיך
-1. לחצו (A) כדי לפתוח גישת כתיבת lvl1 לSysNAND, ואז תלחצו על המקשים בסדר הנכון
-1. תלחצו (A) כדי להמשיך
-1. Press (B), then navigate to "Exit" to exit GM9Megascript
- + When prompted, relock write permissions
-1. תלחצו על (Home) כדי להראות את תפריט הפעולה
-1. Select "Poweroff system" to power off your device
-
-The latest version of Luma3DS has been installed on your SD card and on internal memory.
+The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___
diff --git a/_pages/he_IL/updating-b9s.txt b/_pages/he_IL/updating-b9s.txt
index e03de8ec8d..37b9e8874a 100644
--- a/_pages/he_IL/updating-b9s.txt
+++ b/_pages/he_IL/updating-b9s.txt
@@ -50,15 +50,7 @@ While we believe that custom firmware is safe for online use, there have been on
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
1. תפעילו את המכשיר
-
-#### חלק IV - הגדרת Luma3DS
-
-חלק זה נחוץ רק אם אתם מקבלים את תפריט ההגדרות של Luma3DS אחרי ההפעלה מחדש.
-{: .notice--info}
-
-1. בתפריט ההגדרות של Luma3DS, תשתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
- + **"Show NAND or user string in System Settings"**
-1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
+1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___
diff --git a/_pages/hr_HR/a9lh-to-b9s.txt b/_pages/hr_HR/a9lh-to-b9s.txt
index d7799c2626..cebe7e346c 100644
--- a/_pages/hr_HR/a9lh-to-b9s.txt
+++ b/_pages/hr_HR/a9lh-to-b9s.txt
@@ -63,12 +63,8 @@ For all steps in this section, overwrite any existing files on your SD card.
+ If you get an "OTP Crypto Fail" error, download - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. When prompted, input the key combo given to install boot9strap
1. Once it is complete, press (A) to reboot your device
- + If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-
-#### Section III - Configuring Luma3DS
-
-1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+1. Your device should have rebooted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Press (Start) to save and reboot
___
diff --git a/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt b/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt
index 115426df9b..dfccf4e853 100644
--- a/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt
+++ b/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt
@@ -125,21 +125,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
- + If you see the Luma Configuration screen, continue with the guide without powering off
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### Section VI - Configuring Luma3DS
-
-1. Boot your device while holding (Select) to launch the Luma configuration menu
- + If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
- + If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
-1. Use the (A) button and the D-Pad to turn on the following:
- + “Show NAND or user string in System Settings”
-1. Press (Start) to save and reboot
-
-#### Section VII - Restoring DS Download Play
+#### Section VI - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### Section VII - Restoring DS Download Play
+
1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device
diff --git a/_pages/hr_HR/finalizing-setup.txt b/_pages/hr_HR/finalizing-setup.txt
index e6f9bdacd8..218123976f 100644
--- a/_pages/hr_HR/finalizing-setup.txt
+++ b/_pages/hr_HR/finalizing-setup.txt
@@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ If you get an error, make sure that you have at least 1.3GB of free space on your SD card
1. Press (A) to continue
1. Press (B) to return to the main menu
-1. Select "Dump Options"
-1. Select "Dump Boot9.bin & Boot11.bin"
-1. When prompted, press (A) to proceed
-1. Press (A) to continue
-1. Press (B) to return to the main menu
1. Select "Exit"
1. Press (A) to relock write permissions if prompted
1. Navigate to `[S:] SYSNAND VIRTUAL`
@@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
1. Insert your SD card into your computer
-1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs`, `_boot9_###.bin`, and `_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
- + Make backups in multiple locations (such as online file storage)
+1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
+1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+ + The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Reinsert your SD card into your device
1. Power on your device
diff --git a/_pages/hr_HR/installing-boot9strap-(fredtool).txt b/_pages/hr_HR/installing-boot9strap-(fredtool).txt
index 760ca18390..980dd0d529 100644
--- a/_pages/hr_HR/installing-boot9strap-(fredtool).txt
+++ b/_pages/hr_HR/installing-boot9strap-(fredtool).txt
@@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
- + If you see the Luma Configuration screen, continue with the guide without powering off
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### Section V - Configuring Luma3DS
-
-1. Boot your device while holding (Select) to launch the Luma configuration menu
- + If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
-1. Press (Start) to save and reboot
-
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
- + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-
-#### Section VI - Restoring DS Connection Settings
+#### Section V - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### Section VI - Restoring DS Connection Settings
+
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device
diff --git a/_pages/hr_HR/installing-boot9strap-(hardmod).txt b/_pages/hr_HR/installing-boot9strap-(hardmod).txt
index 9ba5a31b79..f6d74f86c8 100644
--- a/_pages/hr_HR/installing-boot9strap-(hardmod).txt
+++ b/_pages/hr_HR/installing-boot9strap-(hardmod).txt
@@ -82,19 +82,14 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
1. Power off your device
1. Disconnect your hardmod
1. Power on your device
-
-#### Section III - Configuring Luma3DS
-
1. Your device should have booted into the Luma3DS configuration menu
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
___
diff --git a/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt b/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt
index 8155870e78..2e6b5464bb 100644
--- a/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt
@@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
-#### Section IV - SafeB9SInstaller
+#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section V - Configuring Luma3DS
-
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
-1. Use the (A) button and the D-Pad to turn on the following:
- - **"Show NAND or user string in System Settings"**
+ + If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Press (Start) to save and reboot
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___
diff --git a/_pages/hr_HR/installing-boot9strap-(ntrboot).txt b/_pages/hr_HR/installing-boot9strap-(ntrboot).txt
index 29df08162c..15d1f370a2 100644
--- a/_pages/hr_HR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/hr_HR/installing-boot9strap-(ntrboot).txt
@@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Reinsert your SD card into your device
1. Power on your device
1. Your device should have booted into the Luma3DS configuration menu
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/hr_HR/installing-boot9strap-(pichaxx).txt b/_pages/hr_HR/installing-boot9strap-(pichaxx).txt
index c32ee66b58..cb0d57b999 100644
--- a/_pages/hr_HR/installing-boot9strap-(pichaxx).txt
+++ b/_pages/hr_HR/installing-boot9strap-(pichaxx).txt
@@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
-
-#### Section IV - Configuring Luma3DS
-
1. Your device should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}
diff --git a/_pages/hr_HR/installing-boot9strap-(safeb9sinstaller).txt b/_pages/hr_HR/installing-boot9strap-(safeb9sinstaller).txt
index a0f65ad721..d949f546df 100644
--- a/_pages/hr_HR/installing-boot9strap-(safeb9sinstaller).txt
+++ b/_pages/hr_HR/installing-boot9strap-(safeb9sinstaller).txt
@@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section III - Configuring Luma3DS
-
1. Your device should have rebooted into the Luma3DS configuration menu
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/hr_HR/installing-boot9strap-(soundhax).txt b/_pages/hr_HR/installing-boot9strap-(soundhax).txt
index 452c36489d..4b8fa09a92 100644
--- a/_pages/hr_HR/installing-boot9strap-(soundhax).txt
+++ b/_pages/hr_HR/installing-boot9strap-(soundhax).txt
@@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section IV - Configuring Luma3DS
-
1. Your device should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/hr_HR/installing-boot9strap-(usm).txt b/_pages/hr_HR/installing-boot9strap-(usm).txt
index d42d29eafa..64717df967 100644
--- a/_pages/hr_HR/installing-boot9strap-(usm).txt
+++ b/_pages/hr_HR/installing-boot9strap-(usm).txt
@@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
-
-#### Section V - Configuring Luma3DS
-
1. Your device should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/hr_HR/restoring-updating-cfw.txt b/_pages/hr_HR/restoring-updating-cfw.txt
index 6bad262e59..af08fcc8a2 100644
--- a/_pages/hr_HR/restoring-updating-cfw.txt
+++ b/_pages/hr_HR/restoring-updating-cfw.txt
@@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### What You Need
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Instructions
-#### Section I - Prep Work
-
1. Insert your SD card into your computer
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. Reinsert your SD card into your device
+1. Power on your device
+ + If you see the Luma3DS configuration menu, press (Start) to save and reboot
-#### Section II - Configuring Luma3DS
-
-1. Press and hold (Select), and while holding (Select), power on your device
- * You should now see a Luma3DS configuration menu
-1. Use the (A) button and the D-Pad to turn on the following:
- * **"Show NAND or user string in System Settings"**
-1. Press (Start) to save and reboot
-
-#### Section III - CTRNAND Luma3DS
-
-1. Power off your device
-1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
- + If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
-1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
-1. Press (Home) to bring up the action menu
-1. Select "Scripts..."
-1. Select "GM9Megascript"
-1. Select "Scripts from Plailect's Guide"
-1. Select "Setup Luma3DS to CTRNAND"
- + This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
-1. When prompted, press (A) to proceed
-1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
-1. Press (A) to continue
-1. Press (B), then navigate to "Exit" to exit GM9Megascript
- + When prompted, relock write permissions
-1. Press (Home) to bring up the action menu
-1. Select "Poweroff system" to power off your device
-
-The latest version of Luma3DS has been installed on your SD card and on internal memory.
+The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___
diff --git a/_pages/hr_HR/updating-b9s.txt b/_pages/hr_HR/updating-b9s.txt
index 160e4d1eb6..14495d80ce 100644
--- a/_pages/hr_HR/updating-b9s.txt
+++ b/_pages/hr_HR/updating-b9s.txt
@@ -50,15 +50,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
-
-#### Section IV - Configuring Luma3DS
-
-This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
-{: .notice--info}
-
-1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
-1. Press (Start) to save and reboot
+1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___
diff --git a/_pages/hu_HU/a9lh-to-b9s.txt b/_pages/hu_HU/a9lh-to-b9s.txt
index f1f32eb26b..998c096a69 100644
--- a/_pages/hu_HU/a9lh-to-b9s.txt
+++ b/_pages/hu_HU/a9lh-to-b9s.txt
@@ -63,12 +63,8 @@ A most következő lépésekben mindig írd felül az SD kártyán található f
+ Ha egy "OTP Crypto Fail" hibaüzenetet kapsz, akkor töltsd le a következőt: - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et
1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához
- + Ha a készüléked kikapcsol indításkor, bizonyosodj meg róla, hogy átmásoltad-e a `boot.firm` fájlt a Luma3DS `.zip` fájlból az SD kártya gyökerébe
-
-#### III. rész - Luma3DS konfigurálása
-
-1. A Luma3DS konfigurációs menüben használd az (A) gombot és a D-Pad-et, hogy bekapcsold a következőket:
- + **"Show NAND or user string in System Settings"**
+1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia
+ + Ha fekete képernyőt kapsz, [nézd át ezt a hibaelhárítási útmutatót](troubleshooting#boot-related-issues-on-modded-devices)
1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
___
diff --git a/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt b/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt
index f9594dba0a..07872eb104 100644
--- a/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt
+++ b/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt
@@ -125,21 +125,23 @@ Ha inkább egy vizuális útmutatót szeretnél ehhez a fejezethez, [itt](https:
1. Nyomj (A)-t majd ezt követően START-ot és SELECT-et egyszerre a folyamat elkezdéséhez
1. Ha végzett és az alsó képernyő azt mondja "done.", lépj ki a b9sTool-ból, majd kapcsold ki eszközöd
+ Elképzelhető, hogy kényszerítened kell a leállást a bekapcsológomb lenyomva tartásával
- + Ha a Luma konfigurációs képernyőjét látod, folytasd az útmutatót kikapcsolás nélkül
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### VI. rész - Luma3DS konfigurálása
-
-1. Indítsd el a készülékedet a (Select) lenyomva tartásával, hogy megjelenjen a Luma konfigurációs menüje
- + Ha problémába ütközöl a Luma konfigurációs menü elindításakor, kövesd [ezt a hibaelhárítási útmutatót](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
- + Ha a kék fény a 3DS-en be és kikapcsol, akkor hiányzik a `boot.firm` az SD kártyád gyökeréből
-1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez:
- + “Show NAND or user string in System Settings”
-1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-#### VII. rész - A DS Download Play visszaállítása
+#### Section VI - Luma3DS Verification
1. Kapcsold ki a készüléked
1. Helyezd az SD kártyád a számítógépbe
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### VII. rész - A DS Download Play visszaállítása
+
1. Navigálj a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` mappába az SD kártyán
1. Másold a `484E4441.bin` fájlt az `clean` mappájából a letöltött DSiWare csomagból (output_(name).zip) a `Nintendo DSiWare` mappába
1. Tedd vissza az SD kártyád a készülékedbe
diff --git a/_pages/hu_HU/finalizing-setup.txt b/_pages/hu_HU/finalizing-setup.txt
index 07e669cf88..9a990741ec 100644
--- a/_pages/hu_HU/finalizing-setup.txt
+++ b/_pages/hu_HU/finalizing-setup.txt
@@ -132,11 +132,6 @@ Ezek a képernyőképek mutatják az SD kártya minimális elrendezését ahhoz,
+ Ha hibát kapsz, győződj meg róla, hogy legalább 1.3 GB szabad hely van az SD kártyádon
1. Nyomd meg az (A) gombot a folytatáshoz
1. Nyomd meg a (B) gombot, hogy visszamenj a főmenübe
-1. Válaszd ezt: "Dump Options"
-1. Válaszd ezt: "Dump Boot9.bin & Boot11.bin"
-1. Amikor kéri, nyomd meg az (A) gombot a folytatáshoz
-1. Nyomd meg az (A) gombot a folytatáshoz
-1. Nyomd meg a (B) gombot, hogy visszamenj a főmenübe
1. Válaszd az "Exit" opciót
1. Nyomd meg az (A) gombot az írási engedélyek visszavonásához
1. Menj ide: `[S:] SYSNAND VIRTUAL`
@@ -147,10 +142,12 @@ Ezek a képernyőképek mutatják az SD kártya minimális elrendezését ahhoz,
1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü
1. Válaszd a "Poweroff system"-et az eszközöd kikapcsolásához
1. Helyezd az SD kártyád a számítógépbe
-1. Másold a `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs`, `_boot9.bin` és `_boot11_###.bin`fájlokat a `/gm9/out/` mappából az SD kártyáról egy biztonságos helyre a számítógépeden
- + Tarts belőle biztonsági másolatokat több különböző helyen is (például online tárhelyen)
+1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
+1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ Ezek a biztonsági mentések fognak megmenteni, ha a későbbiekben brickelődne a konzolod, vagy bármi félresikerülne a jövőben
1. Töröld a `__sysnand_###.bin` és a `__sysnand_###.bin.sha` fájlokat az SD kártyád `/gm9/out/` mappájából, miután lemásoltad azokat
+ + The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Tedd vissza az SD kártyád a készülékedbe
1. Kapcsold be a készülékedet
diff --git a/_pages/hu_HU/installing-boot9strap-(fredtool).txt b/_pages/hu_HU/installing-boot9strap-(fredtool).txt
index f611341a18..413407d60d 100644
--- a/_pages/hu_HU/installing-boot9strap-(fredtool).txt
+++ b/_pages/hu_HU/installing-boot9strap-(fredtool).txt
@@ -86,24 +86,23 @@ Ha inkább egy vizuális útmutatót szeretnél ehhez a fejezethez, [itt](https:
1. Nyomj (A)-t majd ezt követően START-ot és SELECT-et egyszerre a folyamat elkezdéséhez
1. Ha végzett és az alsó képernyő azt mondja "done." lépj ki a b9sTool-ból, majd kapcsold ki eszközöd
+ Elképzelhető, hogy kényszerítened kell a leállást a bekapcsológomb lenyomva tartásával
- + Ha a Luma konfigurációs képernyőjét látod, folytasd az útmutatót kikapcsolás nélkül
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### V. rész - Luma3DS konfigurálása
-
-1. Indítsd el a készülékedet a (Select) lenyomva tartásával, hogy megjelenjen a Luma konfigurációs menüje
- + Ha problémába ütközöl a Luma konfigurációs menü elindításakor, [kövesd ezt a hibaelhárítási útmutatót](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez:
- + **"Show NAND or user string in System Settings"**
-1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be egészen addig, amíg az SD kártya be van helyezve.
- + A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
- + A következő oldalon be fogod másolni a Luma3DS-t a belső memóriába, így SD kártya nélkül is fogsz tudni bootolni.
-
-#### VI. rész - A DS Connection Settings visszaállítása
+#### Section V - Luma3DS Verification
1. Kapcsold ki a készüléked
1. Helyezd az SD kártyád a számítógépbe
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### VI. rész - A DS Connection Settings visszaállítása
+
1. Másold a `42383841.bin` fájlt az `output/clean/` mappájából a letöltött DSiWare csomagnak (`fredtool.zip`) a `Nintendo 3DS///Nintendo DSiWare/` mappába az SD kártyán
+ Írd felül a létező `42383841.bin` fájlt
1. Tedd vissza az SD kártyád a készülékedbe
diff --git a/_pages/hu_HU/installing-boot9strap-(hardmod).txt b/_pages/hu_HU/installing-boot9strap-(hardmod).txt
index 1dd8ef3c51..a9a03c6918 100644
--- a/_pages/hu_HU/installing-boot9strap-(hardmod).txt
+++ b/_pages/hu_HU/installing-boot9strap-(hardmod).txt
@@ -82,19 +82,14 @@ Ez működni fog a New 3DS, a New 2DS, az Old 3DS, és az Old 2DS konzolok *öss
1. Kapcsold ki a készüléked
1. Válaszd le a hardmododat
1. Kapcsold be a készülékedet
-
-#### III. rész - Luma3DS konfigurálása
-
1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia
- + Ha fekete képernyőt kapsz, [nézd át ezt a hibaelhárítási útmutatót](troubleshooting#boot-related-issues-on-modded-devices)
-1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+ Ha ezen a ponton hibát kapsz, csak folytasd az útmutatót a következő oldalon
-Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be egészen addig, amíg az SD kártya be van helyezve.
+At this point, your console will boot to Luma3DS by default.
+ A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
- + A következő oldalon be fogod másolni a Luma3DS-t a belső memóriába, így SD kártya nélkül is fogsz tudni bootolni.
+ + On the next page, you will install useful homebrew applications to complete your setup.
___
diff --git a/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt b/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt
index 4d1f683147..09f36ba4b1 100644
--- a/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt
@@ -69,21 +69,17 @@ A **cél 3DS**-en (a 3DS, amit módosítani szeretnél):
1. Várj egy kicsit (egy százalék kell megjelenjen a **forrás 3DS**-en)
1. Ha az exploit sikeres volt, akkor a **cél 3DS** be kell bootoljon a SafeB9SInstaller-be
-#### IV. rész - SafeB9SInstaller
+#### IV. rész - boot9strap telepítése
1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához
-
-#### V. rész - Luma3DS konfigurálása
-
1. A cél 3DS-eddel újra kell bootolnod a Luma3DS konfigurációs menübe
- + Bármikor elérheted a Luma3DS konfigurációs menüt kikapcsolással, majd a SELECT gomb nyomva tartása melletti bekapcsolással
-1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez:
- - **"Show NAND or user string in System Settings"**
+ + If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be egészen addig, amíg az SD kártya be van helyezve.
+At this point, your console will boot to Luma3DS by default.
+ A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
- + A következő oldalon be fogod másolni a Luma3DS-t a belső memóriába, így SD kártya nélkül is fogsz tudni bootolni.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+ **Nincs** szükséged a **forrás 3DS** használatára a további lépések végrehajtásához ebben az útmutatóban.
___
diff --git a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
index a757e0f34f..8e013f30b5 100644
--- a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
+++ b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
@@ -63,15 +63,14 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme
1. Tedd vissza az SD kártyád a készülékedbe
1. Kapcsold be a készülékedet
1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia
- + Ha fekete képernyőt kapsz, [nézd át ezt a hibaelhárítási útmutatót](troubleshooting#boot-related-issues-on-modded-devices)
-1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+ Ha ezen a ponton hibát kapsz, csak folytasd az útmutatót a következő oldalon
-Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be egészen addig, amíg az SD kártya be van helyezve.
+At this point, your console will boot to Luma3DS by default.
+ A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
- + A következő oldalon be fogod másolni a Luma3DS-t a belső memóriába, így SD kártya nélkül is fogsz tudni bootolni.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/hu_HU/installing-boot9strap-(pichaxx).txt b/_pages/hu_HU/installing-boot9strap-(pichaxx).txt
index fe6121547c..768d19931b 100644
--- a/_pages/hu_HU/installing-boot9strap-(pichaxx).txt
+++ b/_pages/hu_HU/installing-boot9strap-(pichaxx).txt
@@ -72,19 +72,14 @@ Ennek a folyamatnak a során a Pokémon Picross mentése felülírásra kerül,
1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+ Ha felső képernyő üres, indítsd újra az eszközödet, majd indítsd el újra a Pokémon Picross-t
1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához
-
-#### IV. rész - Luma3DS konfigurálása
-
1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia
- + Bármikor elérheted a Luma3DS konfigurációs menüt kikapcsolással, majd a SELECT gomb nyomva tartása melletti bekapcsolással
- + Ha fekete képernyőt kapsz, [nézd át ezt a hibaelhárítási útmutatót](troubleshooting#boot-related-issues-on-modded-devices)
-1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be egészen addig, amíg az SD kártya be van helyezve.
+At this point, your console will boot to Luma3DS by default.
+ A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
- + A következő oldalon be fogod másolni a Luma3DS-t a belső memóriába, így SD kártya nélkül is fogsz tudni bootolni.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
Ezen a ponton a Pokémon Picross tovább már nem szükséges, eltávolítható az eszközödről. Ha szeretnél játszani a játékkal, állítsd vissza a `00000001.sav` mentésed vagy töltsd le újra a játékot a Nintendo eShop-ból.
{: .notice--info}
diff --git a/_pages/hu_HU/installing-boot9strap-(safeb9sinstaller).txt b/_pages/hu_HU/installing-boot9strap-(safeb9sinstaller).txt
index 726ad3c318..e5905a1c7e 100644
--- a/_pages/hu_HU/installing-boot9strap-(safeb9sinstaller).txt
+++ b/_pages/hu_HU/installing-boot9strap-(safeb9sinstaller).txt
@@ -22,19 +22,15 @@ title: "boot9strap telepítése (SafeB9SInstaller)"
1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához
-
-#### III. rész - Luma3DS konfigurálása
-
1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia
- + Ha fekete képernyőt kapsz, [nézd át ezt a hibaelhárítási útmutatót](troubleshooting#boot-related-issues-on-modded-devices)
-1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+ Ha ezen a ponton hibát kapsz, csak folytasd az útmutatót a következő oldalon
-Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be egészen addig, amíg az SD kártya be van helyezve.
+At this point, your console will boot to Luma3DS by default.
+ A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
- + A következő oldalon be fogod másolni a Luma3DS-t a belső memóriába, így SD kártya nélkül is fogsz tudni bootolni.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/hu_HU/installing-boot9strap-(soundhax).txt b/_pages/hu_HU/installing-boot9strap-(soundhax).txt
index 5921b54964..991de70ae9 100644
--- a/_pages/hu_HU/installing-boot9strap-(soundhax).txt
+++ b/_pages/hu_HU/installing-boot9strap-(soundhax).txt
@@ -60,20 +60,15 @@ A Soundhax (amikor universal-otherapp-pal használjuk) kompatibilis az 1.0.0-s v
1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához
-
-#### IV. rész - Luma3DS konfigurálása
-
1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia
- + Bármikor elérheted a Luma3DS konfigurációs menüt kikapcsolással, majd a SELECT gomb nyomva tartása melletti bekapcsolással
- + Ha fekete képernyőt kapsz, [nézd át ezt a hibaelhárítási útmutatót](troubleshooting#boot-related-issues-on-modded-devices)
-1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+ Ha ezen a ponton hibát kapsz, csak folytasd az útmutatót a következő oldalon
-Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be egészen addig, amíg az SD kártya be van helyezve.
+At this point, your console will boot to Luma3DS by default.
+ A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
- + A következő oldalon be fogod másolni a Luma3DS-t a belső memóriába, így SD kártya nélkül is fogsz tudni bootolni.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/hu_HU/installing-boot9strap-(usm).txt b/_pages/hu_HU/installing-boot9strap-(usm).txt
index d5c5f2afdf..e485cf8b2b 100644
--- a/_pages/hu_HU/installing-boot9strap-(usm).txt
+++ b/_pages/hu_HU/installing-boot9strap-(usm).txt
@@ -84,21 +84,15 @@ Ha a (Jobb/Bal Váll), (D-Pad Fel) vagy (A) gombjaid nem működnek, [a Seedmine
1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+ Ha felső képernyő üres, kapcsold ki az eszközödet, majd csináld újra a III. részt
1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához
-
-#### V. rész - Luma3DS konfigurálása
-
1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia
- + Bármikor elérheted a Luma3DS konfigurációs menüt kikapcsolással, majd a SELECT gomb nyomva tartása melletti bekapcsolással
- + Ha fekete képernyőt kapsz, [nézd át ezt a hibaelhárítási útmutatót](troubleshooting#boot-related-issues-on-modded-devices)
-1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be egészen addig, amíg az SD kártya be van helyezve.
+At this point, your console will boot to Luma3DS by default.
+ A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
- + A következő oldalon be fogod másolni a Luma3DS-t a belső memóriába, így SD kártya nélkül is fogsz tudni bootolni.
+ + On the next page, you will install useful homebrew applications to complete your setup.
-#### IV. rész - A WiFi Configuration Profiles visszaállítása
+#### Section V - Restoring WiFi Configuration Profiles
1. Lépj be a System Settings-be a készülékeden
1. Navigálj ide: `Data Management` -> `DSiWare`
diff --git a/_pages/hu_HU/restoring-updating-cfw.txt b/_pages/hu_HU/restoring-updating-cfw.txt
index f30177a69e..818b019ca3 100644
--- a/_pages/hu_HU/restoring-updating-cfw.txt
+++ b/_pages/hu_HU/restoring-updating-cfw.txt
@@ -12,12 +12,9 @@ Az SD kártyád FAT32-re kell legyen formázva, hogy követhesd ezt az útmutat
### Amire szükséged lesz
* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója
-* A [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) legújabb kiadása
### Lépések
-#### I. rész - Előkészületek
-
1. Helyezd az SD kártyád a számítógépbe
1. Másold át a `boot.3dsx` és `boot.firm` fájlt a Luma3DS `.zip`-ből az SD kártyád gyökerébe, lecserélve a már meglévő fájlokat
+ Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
@@ -25,36 +22,10 @@ Az SD kártyád FAT32-re kell legyen formázva, hogy követhesd ezt az útmutat
+ Ha a `luma` vagy `payloads` mappa nem létezik, hozd létre őket
1. Másold át a `gm9` mappát a GodMode9 `.zip`-ből az SD kártyád gyökerébe egyesítve bármilyen létező mappával és lecserélve minden létező fájlt
1. Tedd vissza az SD kártyád a készülékedbe
+1. Kapcsold be a készülékedet
+ + If you see the Luma3DS configuration menu, press (Start) to save and reboot
-#### II. rész - Luma3DS konfigurálása
-
-1. Nyomd le és tartsd nyomva a (Select) gombot, és a (Select) nyomva tartása mellett kapcsold be az eszközödet
- * Látnod kell ezt követően a Luma3DS konfigurációs menüt
-1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez:
- * **"Show NAND or user string in System Settings"**
-1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-#### III. rész - CTRNAND Luma3DS
-
-1. Kapcsold ki a készüléked
-1. Nyomd le és tartsd nyomva a (Start) gombot, és a (Start) nyomva tartása mellett kapcsold be az eszközödet. Ez elindítja a GodMode9-et
- + Ha nem bootolsz be GodMode9 módba, ellenőrizd, hogy a GodMode9.firm megtalálható a `/luma/payloads/` könyvtárban és hogy a `payloads` helyesen van írva
-1. Ha rákérdez arra, hogy szeretnéd-e a valós dátumot és időt javítani (fix the RTC date&time), nyomd meg az (A) gombot, állítsd be a helyes dátumot és időt, majd nyomd meg az (A) gombot a folytatáshoz
-1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü
-1. Válaszd a "Scripts..." opciót
-1. Válaszd ezt: "GM9Megascript"
-1. Válaszd ezt: "Scripts from Plailect's Guide"
-1. Válaszd ezt: "Setup Luma3DS to CTRNAND"
- + Ez be fogja másolni a frissített Luma3DS-t a belső memóriába, így az eszközöd képes bootolni tud SD kártya behelyezése nélkül
-1. Amikor kéri, nyomd meg az (A) gombot a folytatáshoz
-1. Nyomd meg az (A) gombot, hogy feloldd a SysNAND (lvl1) írást, majd sorban nyomd meg a kijelzett gombokat
-1. Nyomd meg az (A) gombot a folytatáshoz
-1. Nyomd meg a (B) gombot, majd navigálj az "Exit"-hez a GM9Megascript-ből kilépéshez
- + Ha kérdezi, vond vissza az írási engedélyeket
-1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü
-1. Válaszd a "Poweroff system"-et az eszközöd kikapcsolásához
-
-A Luma3DS legfrissebb verziója telepítésre került az SD kártyára és a belső memóriába.
+The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___
diff --git a/_pages/hu_HU/updating-b9s.txt b/_pages/hu_HU/updating-b9s.txt
index 4620926fe9..92c3db04a8 100644
--- a/_pages/hu_HU/updating-b9s.txt
+++ b/_pages/hu_HU/updating-b9s.txt
@@ -50,15 +50,7 @@ A most következő lépésekben mindig írd felül az SD kártyán található f
1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártyád gyökerébe, és cseréld le a már meglévő fájlt
1. Tedd vissza az SD kártyád a készülékedbe
1. Kapcsold be a készülékedet
-
-#### IV. rész - Luma3DS konfigurálása
-
-Ez a szakasz csak akkor kell, ha előjön a Luma3DS konfigurációs menü újraindítás után.
-{: .notice--info}
-
-1. A Luma3DS konfigurációs menüben használd az (A) gombot és a D-Pad-et, hogy bekapcsold a következőket:
- + **"Show NAND or user string in System Settings"**
-1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___
diff --git a/_pages/id_ID/a9lh-to-b9s.txt b/_pages/id_ID/a9lh-to-b9s.txt
index d7799c2626..cebe7e346c 100644
--- a/_pages/id_ID/a9lh-to-b9s.txt
+++ b/_pages/id_ID/a9lh-to-b9s.txt
@@ -63,12 +63,8 @@ For all steps in this section, overwrite any existing files on your SD card.
+ If you get an "OTP Crypto Fail" error, download - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. When prompted, input the key combo given to install boot9strap
1. Once it is complete, press (A) to reboot your device
- + If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-
-#### Section III - Configuring Luma3DS
-
-1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+1. Your device should have rebooted into the Luma3DS configuration menu
+ + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Press (Start) to save and reboot
___
diff --git a/_pages/id_ID/bannerbomb3-fredtool-(twn).txt b/_pages/id_ID/bannerbomb3-fredtool-(twn).txt
index 115426df9b..dfccf4e853 100644
--- a/_pages/id_ID/bannerbomb3-fredtool-(twn).txt
+++ b/_pages/id_ID/bannerbomb3-fredtool-(twn).txt
@@ -125,21 +125,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
- + If you see the Luma Configuration screen, continue with the guide without powering off
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### Section VI - Configuring Luma3DS
-
-1. Boot your device while holding (Select) to launch the Luma configuration menu
- + If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
- + If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
-1. Use the (A) button and the D-Pad to turn on the following:
- + “Show NAND or user string in System Settings”
-1. Press (Start) to save and reboot
-
-#### Section VII - Restoring DS Download Play
+#### Section VI - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### Section VII - Restoring DS Download Play
+
1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
1. Copy the `484E4441.bin` file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device
diff --git a/_pages/id_ID/finalizing-setup.txt b/_pages/id_ID/finalizing-setup.txt
index e6f9bdacd8..218123976f 100644
--- a/_pages/id_ID/finalizing-setup.txt
+++ b/_pages/id_ID/finalizing-setup.txt
@@ -132,11 +132,6 @@ These screenshots indicate the minimum SD card layout that is required to follow
+ If you get an error, make sure that you have at least 1.3GB of free space on your SD card
1. Press (A) to continue
1. Press (B) to return to the main menu
-1. Select "Dump Options"
-1. Select "Dump Boot9.bin & Boot11.bin"
-1. When prompted, press (A) to proceed
-1. Press (A) to continue
-1. Press (B) to return to the main menu
1. Select "Exit"
1. Press (A) to relock write permissions if prompted
1. Navigate to `[S:] SYSNAND VIRTUAL`
@@ -147,10 +142,12 @@ These screenshots indicate the minimum SD card layout that is required to follow
1. Press (Home) to bring up the action menu
1. Select "Poweroff system" to power off your device
1. Insert your SD card into your computer
-1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs`, `_boot9_###.bin`, and `_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
- + Make backups in multiple locations (such as online file storage)
+1. Copy the `/luma/backups/` folder on your SD card to a safe location on your computer
+1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+ + The other backup files are negligible in size and may be kept on your SD card for ease of access
1. Reinsert your SD card into your device
1. Power on your device
diff --git a/_pages/id_ID/installing-boot9strap-(fredtool).txt b/_pages/id_ID/installing-boot9strap-(fredtool).txt
index 760ca18390..980dd0d529 100644
--- a/_pages/id_ID/installing-boot9strap-(fredtool).txt
+++ b/_pages/id_ID/installing-boot9strap-(fredtool).txt
@@ -86,24 +86,23 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+ You may have to force power off by holding the power button
- + If you see the Luma Configuration screen, continue with the guide without powering off
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### Section V - Configuring Luma3DS
-
-1. Boot your device while holding (Select) to launch the Luma configuration menu
- + If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
-1. Press (Start) to save and reboot
-
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
- + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-
-#### Section VI - Restoring DS Connection Settings
+#### Section V - Luma3DS Verification
1. Power off your device
1. Insert your SD card into your computer
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### Section VI - Restoring DS Connection Settings
+
1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device
diff --git a/_pages/id_ID/installing-boot9strap-(hardmod).txt b/_pages/id_ID/installing-boot9strap-(hardmod).txt
index 9ba5a31b79..f6d74f86c8 100644
--- a/_pages/id_ID/installing-boot9strap-(hardmod).txt
+++ b/_pages/id_ID/installing-boot9strap-(hardmod).txt
@@ -82,19 +82,14 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
1. Power off your device
1. Disconnect your hardmod
1. Power on your device
-
-#### Section III - Configuring Luma3DS
-
1. Your device should have booted into the Luma3DS configuration menu
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
___
diff --git a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
index 8155870e78..2e6b5464bb 100644
--- a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
@@ -69,21 +69,17 @@ On the **target 3DS** (the 3DS that you are trying to modify):
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into SafeB9SInstaller
-#### Section IV - SafeB9SInstaller
+#### Section IV - Installing boot9strap
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section V - Configuring Luma3DS
-
1. Your target 3DS should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
-1. Use the (A) button and the D-Pad to turn on the following:
- - **"Show NAND or user string in System Settings"**
+ + If your target 3DS shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Press (Start) to save and reboot
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+ You will **not** need to use your **source 3DS** to complete any further steps on this guide.
___
diff --git a/_pages/id_ID/installing-boot9strap-(ntrboot).txt b/_pages/id_ID/installing-boot9strap-(ntrboot).txt
index 29df08162c..15d1f370a2 100644
--- a/_pages/id_ID/installing-boot9strap-(ntrboot).txt
+++ b/_pages/id_ID/installing-boot9strap-(ntrboot).txt
@@ -63,15 +63,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
1. Reinsert your SD card into your device
1. Power on your device
1. Your device should have booted into the Luma3DS configuration menu
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/id_ID/installing-boot9strap-(pichaxx).txt b/_pages/id_ID/installing-boot9strap-(pichaxx).txt
index c32ee66b58..cb0d57b999 100644
--- a/_pages/id_ID/installing-boot9strap-(pichaxx).txt
+++ b/_pages/id_ID/installing-boot9strap-(pichaxx).txt
@@ -72,19 +72,14 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, reboot your device and re-launch Pokémon Picross
1. Once it is complete, press (A) to reboot your device
-
-#### Section IV - Configuring Luma3DS
-
1. Your device should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
At this point, Pokémon Picross is no longer necessary and can be removed from your device. If you wish to play the game, restore your `00000001.sav` backup or re-download the game from the Nintendo eShop.
{: .notice--info}
diff --git a/_pages/id_ID/installing-boot9strap-(safeb9sinstaller).txt b/_pages/id_ID/installing-boot9strap-(safeb9sinstaller).txt
index a0f65ad721..d949f546df 100644
--- a/_pages/id_ID/installing-boot9strap-(safeb9sinstaller).txt
+++ b/_pages/id_ID/installing-boot9strap-(safeb9sinstaller).txt
@@ -22,19 +22,15 @@ title: "Installing boot9strap (SafeB9SInstaller)"
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section III - Configuring Luma3DS
-
1. Your device should have rebooted into the Luma3DS configuration menu
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/id_ID/installing-boot9strap-(soundhax).txt b/_pages/id_ID/installing-boot9strap-(soundhax).txt
index 452c36489d..4b8fa09a92 100644
--- a/_pages/id_ID/installing-boot9strap-(soundhax).txt
+++ b/_pages/id_ID/installing-boot9strap-(soundhax).txt
@@ -60,20 +60,15 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
-
-#### Section IV - Configuring Luma3DS
-
1. Your device should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
+ If you get an error, just continue to the next page
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
___
diff --git a/_pages/id_ID/installing-boot9strap-(usm).txt b/_pages/id_ID/installing-boot9strap-(usm).txt
index d42d29eafa..64717df967 100644
--- a/_pages/id_ID/installing-boot9strap-(usm).txt
+++ b/_pages/id_ID/installing-boot9strap-(usm).txt
@@ -84,21 +84,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When prompted, input the key combo given on the top screen to install boot9strap
+ If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
-
-#### Section V - Configuring Luma3DS
-
1. Your device should have rebooted into the Luma3DS configuration menu
- + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
- + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
-1. Use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Press (Start) to save and reboot
-At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+At this point, your console will boot to Luma3DS by default.
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
- + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
+ + On the next page, you will install useful homebrew applications to complete your setup.
-#### Section VI - Restoring WiFi Configuration Profiles
+#### Section V - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/id_ID/restoring-updating-cfw.txt b/_pages/id_ID/restoring-updating-cfw.txt
index 6bad262e59..af08fcc8a2 100644
--- a/_pages/id_ID/restoring-updating-cfw.txt
+++ b/_pages/id_ID/restoring-updating-cfw.txt
@@ -12,12 +12,9 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
### What You Need
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
### Instructions
-#### Section I - Prep Work
-
1. Insert your SD card into your computer
1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
@@ -25,36 +22,10 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
+ If the `luma` or `payloads` folder doesn't exist, create them
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
1. Reinsert your SD card into your device
+1. Power on your device
+ + If you see the Luma3DS configuration menu, press (Start) to save and reboot
-#### Section II - Configuring Luma3DS
-
-1. Press and hold (Select), and while holding (Select), power on your device
- * You should now see a Luma3DS configuration menu
-1. Use the (A) button and the D-Pad to turn on the following:
- * **"Show NAND or user string in System Settings"**
-1. Press (Start) to save and reboot
-
-#### Section III - CTRNAND Luma3DS
-
-1. Power off your device
-1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
- + If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
-1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
-1. Press (Home) to bring up the action menu
-1. Select "Scripts..."
-1. Select "GM9Megascript"
-1. Select "Scripts from Plailect's Guide"
-1. Select "Setup Luma3DS to CTRNAND"
- + This will copy the updated version of Luma3DS to internal memory so that your device will be able to boot without an SD card inserted
-1. When prompted, press (A) to proceed
-1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
-1. Press (A) to continue
-1. Press (B), then navigate to "Exit" to exit GM9Megascript
- + When prompted, relock write permissions
-1. Press (Home) to bring up the action menu
-1. Select "Poweroff system" to power off your device
-
-The latest version of Luma3DS has been installed on your SD card and on internal memory.
+The latest version of Luma3DS has now been installed on your SD card and on internal memory.
{: .notice--success}
___
diff --git a/_pages/id_ID/updating-b9s.txt b/_pages/id_ID/updating-b9s.txt
index 160e4d1eb6..14495d80ce 100644
--- a/_pages/id_ID/updating-b9s.txt
+++ b/_pages/id_ID/updating-b9s.txt
@@ -50,15 +50,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
-
-#### Section IV - Configuring Luma3DS
-
-This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
-{: .notice--info}
-
-1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
- + **"Show NAND or user string in System Settings"**
-1. Press (Start) to save and reboot
+1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
___
diff --git a/_pages/it_IT/a9lh-to-b9s.txt b/_pages/it_IT/a9lh-to-b9s.txt
index 42c03037fc..2d3d3c2859 100644
--- a/_pages/it_IT/a9lh-to-b9s.txt
+++ b/_pages/it_IT/a9lh-to-b9s.txt
@@ -63,12 +63,8 @@ Se durante questa sezione ti verrà chiesto di sovrascrivere dei file sulla tua
+ Se ottieni l'errore "OTP Crypto Fail", scarica il file - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce), quindi inseriscilo nella cartella `/boot9strap/` nella tua scheda SD e riprova
1. Quando richiesto, inserisci la combinazione di tasti richiesta a schermo per installare boot9strap
1. Una volta completato il processo, premi (A) per riavviare la tua console
- + Se la console dovesse spegnersi autonomamente al riavvio, assicurati di aver copiato il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD
-
-#### Sezione III - Configurare Luma3DS
-
-1. Nel menu di configurazione di Luma3DS, attiva con il D-Pad e il pulsante (A) le seguenti opzioni:
- + **"Show NAND or user string in System Settings"**
+1. La tua console dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS
+ + Se ottieni una schermata nera, [segui questa guida](troubleshooting#boot-related-issues-on-modded-devices)
1. Premi (Start) per salvare e riavviare il 3DS
___
diff --git a/_pages/it_IT/bannerbomb3-fredtool-(twn).txt b/_pages/it_IT/bannerbomb3-fredtool-(twn).txt
index 54862ce4d4..9bc5a43f7b 100644
--- a/_pages/it_IT/bannerbomb3-fredtool-(twn).txt
+++ b/_pages/it_IT/bannerbomb3-fredtool-(twn).txt
@@ -125,21 +125,23 @@ Se desideri una guida visiva per questa parte, è disponibile [qui](https://zoog
1. Premi (A), quindi premi START e SELECT contemporaneamente per avviare il processo
1. Al termine, quando lo schermo inferiore presenterà la scritta "done.", esci da b9sTool, quindi spegni la console
+ Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
- + Se sei nel menu di configurazione di Luma, continua senza spegnere la console
+ + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
-#### Sezione VI - Configurare Luma3DS
-
-1. Avvia la tua console tenendo premuto (Select) per avviare il menu delle opzioni di Luma
- + Se riscontri problemi all'avvio del menu di configurazione di Luma, [segui questa guida per risolvere il problema](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
- + Se la luce blu del tuo 3DS si accende e si spegne, ti manca il file `boot.firm` nella directory principale della tua scheda SD
-1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni:
- + “Show NAND or user string in System Settings”
-1. Premi (Start) per salvare e riavviare il 3DS
-
-#### Sezione VII - Ripristino della Modalità Download DS
+#### Section VI - Luma3DS Verification
1. Spegni il tuo 3DS
1. Inserisci la scheda SD nel tuo computer
+1. Verify that a `luma` folder exists and that `config.ini` is inside of it
+ + The existence of these folders and files confirms that Luma3DS is installed
+ + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+
+At this point, your console will boot to Luma3DS by default.
+ + Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
+ + On the next page, you will install useful homebrew applications to complete your setup.
+
+#### Sezione VII - Ripristino della Modalità Download DS
+
1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare`
1. Copia il file `484E4441.bin` dalla cartella `clean` dall'archivio DSiWare appena scaricato (`output_(name).zip) nella cartella `Nintendo DSiWare`
1. Reinserisci la scheda SD nella tua console
diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt
index 96f8dd6824..3c71d92fe0 100644
--- a/_pages/it_IT/finalizing-setup.txt
+++ b/_pages/it_IT/finalizing-setup.txt
@@ -20,7 +20,7 @@ In questa pagina realizzeremo backup di file di sistema critici e installeremo i
È consigliato non saltare il download di alcuna di queste applicazioni, in quanto molte verranno utilizzate successivamente in questa stessa pagina. Al termine di questa pagina, la scheda SD verrà ripulita rimuovendo i file di installazione non più necessari.
{: .notice--warning}
-If your **New 3DS** was on version 2.1.0 before following this guide, you should [restore your NAND backup](godmode9-usage#restoring-a-nand-backup) before continuing.
+Se il tuo **New 3DS** era alla versione del software 2.1.0 prima di seguire questa guida, dovresti [ripristinare il tuo backup NAND](godmode9-usage#restoring-a-nand-backup) prima di continuare.
{: .notice--warning}
Se la tua precedente installazione CFW era basata su EmuNAND e desideri spostare il contenuto di EmuNAND/RedNAND in SysNAND, devi [Spostare l'EmuNAND](move-emunand) prima di seguire questa pagina. Se non sai cosa sia l'EmuNAND, allora non ti serve.
@@ -132,11 +132,6 @@ Questi screenshot indicano la minima struttura che la scheda SD deve avere per p
+ Se si verifica un errore, assicurati di avere nella scheda SD almeno 1.3GB liberi
1. Premi il pulsante (A) per continuare
1. Premi (B) per ritornare al menu principale
-1. Seleziona "Dump Options"
-1. Seleziona "Dump Boot9.bin & Boot11.bin"
-1. Quando richiesto, premi (A) per procedere
-1. Premi il pulsante (A) per continuare
-1. Premi (B) per ritornare al menu principale
1. Seleziona "Exit"
1. Se richiesto, premi (A) per ritirare le autorizzazioni di scrittura
1. Entra nella cartella `[S:] SYSNAND VIRTUAL`
@@ -147,10 +142,12 @@ Questi screenshot indicano la minima struttura che la scheda SD deve avere per p
1. Premi il pulsante HOME per far apparire il menu delle azioni
1. Seleziona "Poweroff system" per spegnere la console
1. Inserisci la scheda SD nel tuo computer
-1. Copia il file `