diff --git a/_data/navigation/zh_CN.yml b/_data/navigation/zh_CN.yml index 6ec85c77f6..8b82086412 100644 --- a/_data/navigation/zh_CN.yml +++ b/_data/navigation/zh_CN.yml @@ -24,7 +24,7 @@ bottom: - title: 如果你喜欢这个教程，你可以捐款用Bitcoin或Paypal。 - - title: '如果你要帮助我用“Amazon referral links”参观这里
美国 - Canada - 英国 -  德国 -  西班牙 -  法国 ' + title: '如果你要帮助我用“Amazon referral links”参观这里
美国 - 加拿大 - 英国 -  德国 -  西班牙 -  法国 ' footer: - title: 资源 diff --git a/_pages/af_ZA/2.1.0-ctrtransfer.txt b/_pages/af_ZA/2.1.0-ctrtransfer.txt index 094d8fe4ca..8efefa26e1 100644 --- a/_pages/af_ZA/2.1.0-ctrtransfer.txt +++ b/_pages/af_ZA/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /2.1.0-ctrtransfer.html If you downgrade to 2.1.0 on a 2DS or New 3DS and left Wireless Communication off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up. {: .notice--info} -If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0, make sure to have a microSD card reader on hand before proceeding. +If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. {: .notice--info} Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide. diff --git a/_pages/af_ZA/Decrypt9-(Homebrew-Launcher).txt b/_pages/af_ZA/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/af_ZA/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/af_ZA/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/af_ZA/Installing-arm9loaderhax.txt b/_pages/af_ZA/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/af_ZA/Installing-arm9loaderhax.txt +++ b/_pages/af_ZA/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/ar_SA/Decrypt9-(Homebrew-Launcher).txt b/_pages/ar_SA/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/ar_SA/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ar_SA/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/ar_SA/Installing-arm9loaderhax.txt b/_pages/ar_SA/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/ar_SA/Installing-arm9loaderhax.txt +++ b/_pages/ar_SA/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/ca_ES/2.1.0-ctrtransfer.txt b/_pages/ca_ES/2.1.0-ctrtransfer.txt index 46851bfd39..c363fa29d8 100644 --- a/_pages/ca_ES/2.1.0-ctrtransfer.txt +++ b/_pages/ca_ES/2.1.0-ctrtransfer.txt @@ -56,13 +56,13 @@ Heu de ser al Decrypt9 per poder seguir els següents passos. ##### Secció II - ctrtransfer -**ES NECESSARI tenir una còpia de seguretat de la NAND de la _vostra_ consola. Si no en teniu una, se us demanarà que la creeu com a part d'un dels següents passos.** +**ÉS NECESSARI tenir una còpia de seguretat de la NAND de la _vostra_ consola. Si no en teniu una, se us demanarà que la creeu com a part d'un dels següents passos.** {: .notice--danger} **Si no sabeu del cert si teniu una còpia de seguretat de la vostra NAND, per seguretat, creeu-ne una quan se us demani prement (A).** {: .notice--danger} -**Si no teniu prou espai disponible per crear la còpia de seguretat, premeu (Select) al menú de Decrypt9WIP per extreure la vostra targeta SD. Això li permet inserir una nova targeta SD per fer la còpia de seguretat o alliberar espai a la targeta SD actual.** +**Si no teniu prou espai disponible per crear la còpia de seguretat, premeu (Select) al menú de Decrypt9WIP per extreure la vostra targeta SD. Això us permetrà inserir una nova targeta SD per fer la còpia de seguretat o alliberar espai a la targeta SD actual.** {: .notice--danger} 1. Aneu a "SysNAND Options", després "CTRNAND Transfer" i llavors "Auto CTRNAND Transfer" diff --git a/_pages/ca_ES/Decrypt9-(Homebrew-Launcher).txt b/_pages/ca_ES/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/ca_ES/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ca_ES/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/ca_ES/Installing-arm9loaderhax.txt b/_pages/ca_ES/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/ca_ES/Installing-arm9loaderhax.txt +++ b/_pages/ca_ES/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/cs_CZ/Decrypt9-(Homebrew-Launcher).txt b/_pages/cs_CZ/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/cs_CZ/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/cs_CZ/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/cs_CZ/Installing-arm9loaderhax.txt b/_pages/cs_CZ/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/cs_CZ/Installing-arm9loaderhax.txt +++ b/_pages/cs_CZ/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/da_DK/Decrypt9-(Homebrew-Launcher).txt b/_pages/da_DK/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/da_DK/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/da_DK/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/da_DK/Installing-arm9loaderhax.txt b/_pages/da_DK/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/da_DK/Installing-arm9loaderhax.txt +++ b/_pages/da_DK/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/de_DE/2.1.0-ctrtransfer.txt b/_pages/de_DE/2.1.0-ctrtransfer.txt index 7c368f3847..d194655c92 100644 --- a/_pages/de_DE/2.1.0-ctrtransfer.txt +++ b/_pages/de_DE/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /de_DE/2.1.0-ctrtransfer.html Solltest du deinen 2DS oder New 3DS gedowngradet und dabei die Drahtloskommunikation ausgeschaltet gelassen haben, kannst du diese Funktion wieder einschalten, indem du den Akku und das Ladekabel für einige Sekunden aus der Konsole entfernst und sie danach wieder einschaltest. {: .notice--info} -If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. +Wenn du bisher die microSD-Kartenverwaltung des New 3DS benutzt hast, wird diese auf 2.1.0 nicht mehr funktionieren. Stelle sicher, dass du einen microSD-Kartenleser besitzt, bevor du fortfährst. {: .notice--info} Deine Konsole wird nach dem ctrtransfer möglicherweise nicht alle installierten Spiele anzeigen. Das liegt daran, dass beim Transfer die Tickets gelöscht werden. Daher wirst du sie vorher sichern. Am Ende der Anleitung werden sie wiederhergestellt. diff --git a/_pages/de_DE/Decrypt9-(Homebrew-Launcher).txt b/_pages/de_DE/Decrypt9-(Homebrew-Launcher).txt index c6bcf75e37..84a1cbbf4a 100644 --- a/_pages/de_DE/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/de_DE/Decrypt9-(Homebrew-Launcher).txt @@ -12,19 +12,18 @@ permalink: /de_DE/decrypt9-(homebrew-launcher).html #### Anleitung -1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Erstelle einen Ordner namens `files9` im Stammverzeichnis deiner SD-Karte, falls er noch nicht existiert -2. Kopiere `safehax.3dsx` in den `/3ds/`-Ordner auf deiner SD-Karte -3. Kopiere `fasthax.3dsx` in den `/3ds/`-Ordner auf deiner SD-Karte -4. Kopiere `Decrypt9WIP.bin` aus der Decrypt9WIP-`.zip` in das Stammverzeichnis deiner SD-Karte und benenne `Decrypt9WIP.bin` in `safehaxpayload.bin` um -5. Setze die SD-Karte in deinen 3DS ein -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) -7. Launch fasthax from the list of homebrew - + You may have to scroll down to see this option -8. Once it has completed, press (Start) to exit back to the Homebrew Launcher +1. Entferne die SD-Karte während du noch Homebrew Launcher bist und schließe sie an den PC an +2. Erstelle einen Ordner namens `files9` im Stammverzeichnis deiner SD-Karte, falls er noch nicht existiert +3. Kopiere `safehax.3dsx` in den `/3ds/`-Ordner auf deiner SD-Karte +4. Kopiere `fasthax.3dsx` in den `/3ds/`-Ordner auf deiner SD-Karte +5. Kopiere `Decrypt9WIP.bin` aus der Decrypt9WIP-`.zip` in das Stammverzeichnis deiner SD-Karte und benenne `Decrypt9WIP.bin` in `safehaxpayload.bin` um +6. Setze die SD-Karte in deinen 3DS ein +7. Starte fasthax aus der Liste der Anwendungen + + Es kann sein, dass du dafür runterscrollen musst +8. Sobald der Vorgang beendet ist drücke (Start) um zurück zum Homebrew Menü zu gelangen + Dieser Vorgang benötigt eventuell mehrere Versuche -9. Launch safehax from the list of homebrew - + You may have to scroll down to see this option +9. Starte safehax aus der Liste der Anwendungen + + Es kann sein, dass du dafür runterscrollen musst 10. Wenn der Exploit erfolgreich war, hast du jetzt Decrypt9 gestartet Weiter zu [2.1.0 ctrtransfer](2.1.0-ctrtransfer) diff --git a/_pages/de_DE/Hardmod-Downgrade.txt b/_pages/de_DE/Hardmod-Downgrade.txt index 18a2a51bbc..6f1d39ba10 100644 --- a/_pages/de_DE/Hardmod-Downgrade.txt +++ b/_pages/de_DE/Hardmod-Downgrade.txt @@ -45,7 +45,7 @@ Dies funktioniert mit einem New 3DS, Old 3DS und 2DS. 1. Kopiere und vereinige den `3ds`-Ordner aus der 3DSident-`.zip` mit dem bereits vorhandenen `3ds`-Ordner auf deiner SD-Karte 2. Stecke deine SD-Karte wieder in deinen 3DS -3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the Homebrew Launcher on the device +3. Benutze den [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) um den Homebrew Launcher auf deiner Konsole zu starten 4. Starte 3DSident 5. Überprüfe Folgendes: + **Kernel version**: 2.50-11 diff --git a/_pages/de_DE/Home.txt b/_pages/de_DE/Home.txt index 547a5e071d..e0578be2fa 100644 --- a/_pages/de_DE/Home.txt +++ b/_pages/de_DE/Home.txt @@ -40,7 +40,7 @@ In den meisten Fällen kannst du Homebrew auf deiner Konsole mit Hilfe der Ninte ## Was ist Custom Firmware? -**Custom Firmware** ("CFW") ermöglicht dir fortgeschrittene Hacks, welche Userland-Homebrew nicht ohne weiteres erlaubt. Zum Beispiel lassen sich mit Hilfe von Signatur-Patches unsiginierte Titel installieren, die direkt im HOME-Menü erscheinen. +**Custom Firmware** ("CFW") ermöglicht dir fortgeschrittene Hacks, welche Userland-Homebrew nicht ohne weiteres erlaubt. Zum Beispiel lassen sich mit Hilfe von Signatur-Patches unsignierte Titel installieren, die direkt im HOME-Menü erscheinen. CFW kann leicht auf Konsolen mit der Systemsoftwareversion 11.2.0 (aktuellste) oder älter installiert werden. diff --git a/_pages/de_DE/Homebrew-Launcher-(Soundhax).txt b/_pages/de_DE/Homebrew-Launcher-(Soundhax).txt index 319d20cbee..f6d46606ef 100644 --- a/_pages/de_DE/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/de_DE/Homebrew-Launcher-(Soundhax).txt @@ -26,9 +26,9 @@ SoundHax ist kompatibel mit den Versionen 9.0.0 bis 11.2.0 in den Regionen EUR, 6. Klicke dich durch alle Vogeltipps, danach schließe die App und starte sie erneut + Startest du SoundHax sofort würden diese Tipps bei jedem Start von Nintendo 3DS Sound auftauchen 7. Spiele die SoundHax `.m4a` ab - + This may take several tries - + If it freezes, just force the console to power off by holding the power button, then try again -8. Your console should load the Homebrew Launcher + + Hierzu wirst du wahrscheinlich mehrere Versuche benötigen + + Wenn sich deine Konsole aufhängt, schalte sie durch langes halten des Power-Knopfes aus, und versuche es erneut +8. Deine Konsole sollte den Homebrew Launcher laden Fortfahren mit [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/de_DE/Installing-arm9loaderhax.txt b/_pages/de_DE/Installing-arm9loaderhax.txt index bba35044e7..d35c414ce5 100644 --- a/_pages/de_DE/Installing-arm9loaderhax.txt +++ b/_pages/de_DE/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ In diesem Teil der Anleitung wirst du die Schritte ausführen, auf die alle ande arm9loaderhax ist der fast bestmögliche Weg, ein Gerät zu exploiten, da es permanent in die "NAND-Firmware"-Partitionen installiert werden kann und vor dem Großteil des eigentlichen Betriebssystem startet. Dies erlaubt es, dass arm9loaderhax auf *allen* Versionen funktioniert, sich selbst schützen kann und einen 3DS vor einem Großteil der Situationen, die einen 3DS, der kein A9LH installiert hat, wie ein nicht funktionierendes Home-Menü oder schlechte Titel, zu schützen. -Die Datei `arm9loaderhax.bin` wird von arm9loaderhax gestartet, nachdem es vollständig vom NAND geladen wurde und kann jeder funktioniere ARM9-Payload sein. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. +Die Datei `arm9loaderhax.bin` wird von arm9loaderhax gestartet, nachdem es vollständig vom NAND geladen wurde und kann jeder funktioniere ARM9-Payload sein. Diese Datei kann zu jeder Zeit durch eine Andere ersetzt werden, auch wenn es Luma3DS erlaubt, andere arm9 Payloads durch den Luma3DS chainloader zu starten. In diesem Fall verwendest du Luma3DS von [AuroraWright](https://github.com/AuroraWright/), um direkt einen gepatchten SysNAND zu starten. Dies erlaubt es dir, die Notwendigkeit eines EmuNAND jeglicher Art komplett zu umgehen, was die Nutzung eines gehackten 3DS wesentlich erleichtert, sowie Speicherplatz auf der SD-Karte spart. @@ -31,7 +31,7 @@ Nachdem arm9loaderhax installiert und Luma3DS mit den korrekten Einstellungen ei Während dieses Prozesses richtest du auch folgende Programme ein: + **FBI** *(installiert Spiele und Anwendungen im CIA-Format)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Luma3DS Updater** *(aktualisiert deine CFW Installation)* + **Hourglass9** *(Multifunktionstool, welches NAND- und Cartridge-Funktionen ausführen kann)* #### Was du brauchst @@ -66,12 +66,12 @@ Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releas 1. **Sofern er existiert, kopiere den `/files9/`-Ordner auf deiner SD-Karte an einen sicheren Ort auf deinem Computer und erstelle an mehreren Orten (z. B. Online-Speicher) Sicherheitskopien; die enthaltenen Dateien können dich vor totalem Datenverlust bewahren, solltest du dein System kaputt machen** 2. Erstelle einen Ordner mit dem Namen `cias` im Stammverzeichnis deiner SD-Karte, soweit er nicht schon existiert 6. Kopiere _den Inhalt_ von der SafeA9LHInstaller `.7z`-Datei in das Stammverzeichnis deiner SD-Karte -7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card -8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card +7. Kopiere den `a9lh`-Ordner aus der data_input `.zip` in das Stammverzeichnis deiner SD-Karte +8. Kopiere _den Inhalt_ der arm9loaderhax-Datei release `.7z` in den `a9lh`-Ordner auf deiner SD-Karte 9. Kopiere `hblauncher_loader.cia` aus der hblauncher_loader-`.zip` in den `/cias/`-Ordner auf deiner SD-Karte 10. Kopiere `lumaupdater.cia` aus der Luma3DS Updater-`.zip` in den `/cias/`-Ordner auf deiner SD-Karte 11. Kopiere `FBI.cia` aus der FBI-`.zip` in den `/cias/`-Ordner auf deiner SD-Karte -12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files +12. Kopiere `arm9loaderhax.bin` aus der Luma3DS `.7z` in das Stammverzeichnis deiner SD-Karte, überschreibe dabei bereits existierenden Dateien 13. Erstelle einen Ordner mit dem Namen `luma` im Stammverzeichnis deiner SD-Karte 14. Erstelle einen Ordner mit dem Namen `payloads` in dem `luma`-Ordner auf deiner SD-Karte 15. Kopiere `Hourglass9.bin` aus der Hourglass9-`.zip` in den `/luma/payloads/`-Ordner auf deiner SD-Karte und benenne `Hourglass9.bin` zu `start_Hourglass9.bin` um @@ -88,7 +88,7 @@ Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releas + Wenn du die Fehlermeldung "This service is not available in your region" bekommst, benutze die Systemeinstellungen, um die Region deines Gerätes zu der Region deines NANDs zu ändern, den du mit dem 2.1.0 ctrtransfer installiert hast + Wenn du weitere Fehler bekommst, [folge dieser Anleitung zur Fehlerbehebung](troubleshooting#ts_browser) + Wenn du einen geglitchten Bildschirm bekommst, [folge dieser Anleitung zur Fehlerbehebung](troubleshooting#ts_safe_a9lh_screen) - + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + + Wenn du einen 2DS oder New 3DS benutzt und die Internet Verbindung nicht mehr aktiviert ist, entferne die Batterie für einige Sekunden um die Verbidung wiederherzustellen + Drücke (Select) für eine vollständige Installation + Das Installationsprogramm wird nun arm9loaderhax auf deinem Gerät installieren (das geht sehr schnell) + Schalte deine Konsole durch drücken eines beliebigen Knopfes aus @@ -96,7 +96,7 @@ Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releas ##### Abschnitt III - Luma3DS konfigurieren -1. Boot your device while holding (Select) to enter the Luma3DS configuration menu +1. Starte deinen 3DS während du (Select) gedrückt hälst um in die Luma3DS Konfiguration zu gelangen + Stelle sicher, dass du (Select) schon gedrückt hälst, bevor du den Power-Knopf drückst + Wenn du einen schwarzen Bildschirm erhälst, [folge dieser Anleitung zur Fehlerbehebung](troubleshooting#ts_sys_a9lh) + Wenn stattdessen der SafeA9LHInstaller startet, [dann folge dieser Anleitung zur Fehlerbehebung](troubleshooting#ts_safe_a9lh) @@ -104,7 +104,7 @@ Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releas + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you can *also* enable the following: +3. Falls du einen **New 3DS** nutzt, kannst du auch folgendes aktivieren: + **"New 3DS CPU" zu "Clock+L2(x)"** + Dies wird die Bildrate von vielen Spielen erhöhen, könnte aber Instabilitäten in anderen Spielen verursachen + Wenn manche Spiele nicht richtig funktionieren, deaktiviere diese Option und versuche es erneut @@ -117,17 +117,17 @@ Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releas Falls du vor dem Befolgen dieser Anleitung bereits ein EmuNAND eingerichtet hattest und die Inhalte deines EmuNAND gerne auf deine neue SysNAND-CFW übertragen möchtest, solltest du jetzt [Verschiebe EmuNAND](move-emunand) befolgen, anstatt die ersten vier Schritte dieses Abschnittes durchzuführen. {: .notice--info} -1. Boot your device while holding (Start) to enter Hourglass9 -3. Gehe zu "SysNAND Backup/Restore" -4. Gehe zu "SysNAND Restore (keep a9lh)" und stelle "NANDmin.bin" wieder her -5. Drücke (Start) um das System neu zu starten +1. Starte deinen 3DS während du (Start) gedrückt hälst um in Hourlgass9 zu gelangen +2. Gehe zu "SysNAND Backup/Restore" +3. Gehe zu "SysNAND Restore (keep a9lh)" und stelle "NANDmin.bin" wieder her +4. Drücke (Start) um das System neu zu starten + Falls du einen schwarzen Bildschirm erhältst, [folge 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. Falls deine Sicherheitskopie von einer System-Firmware zwischen 3.0.0 und 4.5.0 stammt, wird deine Konsole nicht starten, bis du manuell die benötigte Firmware herunterlädst: + Lade [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) herunter und benenne sie zu "firmware.bin" um + Lade [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) herunter + Kopiere `firmware.bin` und `cetk` in den `/luma/`-Ordner auf deiner SD-Karte + Lösche beide Dateien, nachdem du deinen 3DS aktualisiert hast -7. Aktualisiere deinen 3DS, indem du in die Systemeinstellungen gehst, dann unter "Allgemeine Einstellungen" ganz nach rechts schaltest und "System-Update" auswählst +6. Aktualisiere deinen 3DS, indem du in die Systemeinstellungen gehst, dann unter "Allgemeine Einstellungen" ganz nach rechts schaltest und "System-Update" auswählst + Updates während der Nutzung von A9LH + Luma (was du hast) sind sicher, hört auf nachzufragen + Die Warnung, dass ein New 3DS niemals von 2.1.0 aktualisiert werden darf, gilt nicht mehr nach der Wiederherstellung deines NAND-Backups. + Falls ein Fehler auftreten sollte, setze deine DNS-Einstellungen auf "automatisch beziehen" @@ -135,13 +135,13 @@ Falls du vor dem Befolgen dieser Anleitung bereits ein EmuNAND eingerichtet hatt ##### Abschnitt V - Injektion von FBI -1. Boot your device while holding (Start) to enter Hourglass9 -3. Gehe zu "SysNAND Backup/Restore", dann wähle "Health&Safety Dump" aus, um die Gesundheits- und Sicherheitsinformationen-Applikation als "hs.app" abzuspeichern **(du kannst mit dem (Steuerkreuz) hoch und runter, sowie links und rechts schalten, um den Namen zu ändern)** -4. Drücke (B), und wähle dann "Health&Safety Inject" aus -5. Wähle die zu deiner Region passende FBI-`.app` aus -6. Drücke (A) zum Bestätigen -7. Drücke (Start) um das System neu zu starten -8. Wenn du immer noch in die normale Gesundheits- und Sicherheitsinformationen-Applikation startest und in der Vergangenheit mithilfe einer Gateway Flashkarte gedowngradet hast, dann folge [dieser Anleitung](troubleshooting#gw_fbi) zur Fehlerbehebung +1. Starte deinen 3DS während du (Start) gedrückt hälst um in Hourlgass9 zu gelangen +2. Gehe zu "SysNAND Backup/Restore", dann wähle "Health&Safety Dump" aus, um die Gesundheits- und Sicherheitsinformationen-Applikation als "hs.app" abzuspeichern **(du kannst mit dem (Steuerkreuz) hoch und runter, sowie links und rechts schalten, um den Namen zu ändern)** +3. Drücke (B), und wähle dann "Health&Safety Inject" aus +4. Wähle die zu deiner Region passende FBI-`.app` aus +5. Drücke (A) zum Bestätigen +6. Drücke (Start) um das System neu zu starten +7. Wenn du immer noch in die normale Gesundheits- und Sicherheitsinformationen-Applikation startest und in der Vergangenheit mithilfe einer Gateway Flashkarte gedowngradet hast, dann folge [dieser Anleitung](troubleshooting#gw_fbi) zur Fehlerbehebung ##### Abschnitt VI - Fertigstellen des Setups @@ -161,7 +161,7 @@ Falls du vor dem Befolgen dieser Anleitung bereits ein EmuNAND eingerichtet hatt 14. Starte den Homebrew Launcher vom Home-Menü 15. Wähle "DSP Dump" 16. Drücke (Start) zum Beenden -17. Boot your device while holding (Start) to enter Hourglass9 +17. Starte deinen 3DS während du (Start) gedrückt hälst um in Hourlgass9 zu gelangen 19. Navigiere zu "SysNAND Backup/Restore" und wähle dann "Health&Safety Inject" 20. Wähle `hs.app` (die Version, die du in Abschnitt V, Schritt 2 erstellt hast und die nicht FBI enthält) aus, drücke (A) und bestätige die Injektion 21. Drücke im Hauptmenü (Select) um deine SD-Karte auszuwerfen @@ -169,7 +169,7 @@ Falls du vor dem Befolgen dieser Anleitung bereits ein EmuNAND eingerichtet hatt + Dadurch, dass du deine Konsole mindestens einmal ohne SD-Karte neustartest, wirst du in der Lage sein, die CTRNAND basierte Luma3DS-Installation einzurichten 23. Benutze den (A)-Knopf und das (Steuerkreuz), um die folgenden Punkte zu aktivieren: + **"Show NAND or user string in System Settings"** -24. If you are using a **New 3DS**, you can *also* enable the following: +24. Falls du einen **New 3DS** nutzt, kannst du auch folgendes aktivieren: + **"New 3DS CPU" zu "Clock+L2(x)"** + Dies wird die Bildrate von vielen Spielen erhöhen, könnte aber Instabilitäten in anderen Spielen verursachen + Wenn manche Spiele nicht richtig funktionieren, deaktiviere diese Option und versuche es erneut @@ -191,7 +191,7 @@ Dies aktualisiert nur die Luma3DS-Dateien auf der SD-Karte. If you boot the devi {% capture notice-6 %} Du wirst nun standardmäßig eine Custom Firmware basierend auf dem SysNAND starten. Du kannst nun (Select) beim Starten halten, um das Luma3DS Konfigurationsmenü zu öffnen. -You can now hold (Start) on boot to launch Hourglass9. +Du kannst nun (Start) beim Starten deiner Konsole gedrückt halten, um Hourglass9 zu starten. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/de_DE/Move-EmuNAND.txt b/_pages/de_DE/Move-EmuNAND.txt index 67a2166721..82db9ab611 100644 --- a/_pages/de_DE/Move-EmuNAND.txt +++ b/_pages/de_DE/Move-EmuNAND.txt @@ -23,30 +23,30 @@ Du wirst deine GBA VC und DSiWare Spielstände VERLIEREN! 1. Kopiere `GodMode9.bin` aus der GodMode9`.zip` in den `/luma/payloads/` Ordner auf deiner SD-Karte und benenne `GodMode9.bin` im Ordner `/luma/payloads/`um in `up_GodMode9.bin` 2. Lege deinen SD-Karte wieder in deinen 3DS ein 3. Öffne Hourglass9 von arm9loaderhax, indem du, während dem Hochfahren, (Start) gedrückt hältst -5. Gehe zu "EmuNAND Backup/Restore", wähle dann die Option "EmuNAND Backup" um deinen EmuNAND in "NANDmin_emu.bin" zu speichern -6. Drücke (B), um zum Hauptmenü zurückzukehren -7. Navigiere zu "SysNAND Backup/Restore", wähle dann die Option "SysNAND Restore (keep a9lh)" zur Wiederherstellung deiner SysNAND von "NANDmin_emu.bin" -8. Drücke (Select), um deine SD-Karte auszuwerfen -9. Lege deine SD-Karte in deinen Computer ein, kopiere dann `NANDmin.bin` und die `NANDmin.bin.sha` aus dem `/files9/` Ordner an einen sicheren Platz +4. Gehe zu "EmuNAND Backup/Restore", wähle dann die Option "EmuNAND Backup" um deinen EmuNAND in "NANDmin_emu.bin" zu speichern +5. Drücke (B), um zum Hauptmenü zurückzukehren +6. Navigiere zu "SysNAND Backup/Restore", wähle dann die Option "SysNAND Restore (keep a9lh)" zur Wiederherstellung deiner SysNAND von "NANDmin_emu.bin" +7. Drücke (Select), um deine SD-Karte auszuwerfen +8. Lege deine SD-Karte in deinen Computer ein, kopiere dann `NANDmin.bin` und die `NANDmin.bin.sha` aus dem `/files9/` Ordner an einen sicheren Platz + Lege Sicherheitskopien an mehrere Orten an + Diese Sicherheitskopie wird dich vor einem Brick schützen, falls in der Zukunft etwas schief gehen sollte + **Deine Sicherheitskopie sollte [einer der folgenden Größen besitzen](nand-size), ist dies nicht der Fall solltest du sie löschen und eine neue anlegen!** -10. Lösche `NANDmin_emu.bin` aus dem Ordner `/ files9 /` auf deiner SD-Karte nachdem du die Datei kopiert hast -11. ** Sichere jede Datei von deiner SD-Karte in einem Ordner auf deinem Computer, da in den nächsten Schritten alle Dateien gelöscht werden ** -12. Lege deinen SD-Karte wieder in deinen 3DS ein -13. Drücke (Start) um neu zu starten; halte während des Hochfahren (Steuerkreuz oben) gedrückt, um GodMode9 zu öffnen -14. Drücke die (Home) Taste um das Aktionsmenü zu öffnen -15. Wähle "SD format menu" -16. Drücke (A) um zu bestätigen -17. Wähle "No EmuNAND" -18. Wähle "Auto" -19. Gebe die angezeigte Tastenkombination ein, um den Vorgang zu bestätigen -20. Drücke (R) und (B) gleichzeitig um die SD-Karte auszuwerfen -21. Lege deine SD-Karte in deinen Computer ein und kopiere alle Dateien wieder auf die SD-Karte +9. Lösche `NANDmin_emu.bin` aus dem Ordner `/ files9 /` auf deiner SD-Karte nachdem du die Datei kopiert hast +10. ** Sichere jede Datei von deiner SD-Karte in einem Ordner auf deinem Computer, da in den nächsten Schritten alle Dateien gelöscht werden ** +11. Lege deinen SD-Karte wieder in deinen 3DS ein +12. Drücke (Start) um neu zu starten; halte während des Hochfahren (Steuerkreuz oben) gedrückt, um GodMode9 zu öffnen +13. Drücke die (Home) Taste um das Aktionsmenü zu öffnen +14. Wähle "SD format menu" +15. Drücke (A) um zu bestätigen +16. Wähle "No EmuNAND" +17. Wähle "Auto" +18. Gebe die angezeigte Tastenkombination ein, um den Vorgang zu bestätigen +19. Drücke (R) und (B) gleichzeitig um die SD-Karte auszuwerfen +20. Lege deine SD-Karte in deinen Computer ein und kopiere alle Dateien wieder auf die SD-Karte + Stelle sicher, dass du die `arm9loaderhax.bin` Datei auf der SD-Karte mit der aus der Sicherheitskopie ersetzt -22. Lege deinen SD-Karte wieder in deinen 3DS ein -23. Drücke (A) um die SD-Karte einzuhängen -24. Drücke (Start), um die Konsole neu zu starten! -25. Falls du einen einen schwarzen Bildschirm bekommen solltest, [folge dieser Anleitung zur Problembehandlung](troubleshooting#ts_sys_down) +21. Lege deinen SD-Karte wieder in deinen 3DS ein +22. Drücke (A) um die SD-Karte einzuhängen +23. Drücke (Start), um die Konsole neu zu starten! +24. Falls du einen einen schwarzen Bildschirm bekommen solltest, [folge dieser Anleitung zur Problembehandlung](troubleshooting#ts_sys_down) Zu [arm9loaderhax installieren](installing-arm9loaderhax) zurückkehren. \ No newline at end of file diff --git a/_pages/de_DE/Region-Changing.txt b/_pages/de_DE/Region-Changing.txt index cc35fbc3b7..78e22aa9c8 100644 --- a/_pages/de_DE/Region-Changing.txt +++ b/_pages/de_DE/Region-Changing.txt @@ -45,7 +45,7 @@ Regionswechsel, welche die ctrtransfer-Methode (welche in dieser Anleitung genut ##### Abschnitt I - Vorbereitung -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card +1. Kopiere `GodMode9.bin` aus der GodMode9 `.zip` in den `/luma/payloads/` Ordner auf deiner SD-Karte 2. Kopiere die `Decrypt9WIP.bin` in den `/luma/payloads/` Ordner auf deiner SD-Karte und benenne `Decrypt9WIP.bin`in `x_Decrypt9WIP.bin` um 3. Kopiere die 9.2.0 ctrtransfer image`.bin` und `.bin.sha` aus der `ctrtransfer.zip` in den `/files9/` Ordner auf deiner SD-Karte 4. Lege deine SD-Karte wieder in deinen 3DS ein @@ -53,7 +53,7 @@ Regionswechsel, welche die ctrtransfer-Methode (welche in dieser Anleitung genut ##### Abschnitt II - Sichern der Tickets und der Konfigurationen 1. Drücke (Start) und halte dann (X) gedrückt, um in den arm9loaderhax Decrypt9 zu starten -2. Hover over Decrypt9WIP, then press (A) to launch it +2. Wähle Decrypt9WIP aus, und drücke dann (A), um es zu starten 3. Navigiere zu "Ticket/Titlekey Options", dann wählst du "Ticket Dump (SysNAND)" aus 4. Drücke (Select) um deine SD-Karte zu entfernen und stecke die SD Karte in deinen Computer 5. Lösche alle `.tik` Dateien im `/files9/` Ordner die **nicht** mit `00-` starten @@ -122,7 +122,7 @@ Regionswechsel, welche die ctrtransfer-Methode (welche in dieser Anleitung genut ##### Abschnitt VII - Konfigurationen wiederherstellen 1. Drücke (Start) und halte dann (X) gedrückt, um in den arm9loaderhax Decrypt9 zu starten -2. Hover over Decrypt9WIP, then press (A) to launch it +2. Wähle Decrypt9WIP aus, und drücke dann (A), um es zu starten 2. Gehe zu "SysNAND Options", dann "System Save Inject", dann wähle "Inject configsave.bin" Old 3DS / 2DS müssen möglicherweise formatiert werden (mit TinyFormat oder in den Systemeinstellungen) um Spiele, welche den erweiteten Speichermodus benötigen (z. B Monster Hunter, Super Smash Bros, oder Pokemon Sonne/Mond) spielen zu können. diff --git a/_pages/de_DE/Site-Navigation.txt b/_pages/de_DE/Site-Navigation.txt index df5c77c82a..0e63023c2c 100644 --- a/_pages/de_DE/Site-Navigation.txt +++ b/_pages/de_DE/Site-Navigation.txt @@ -47,4 +47,4 @@ sitemap: false + [A9LH aktualisieren](updating-a9lh) + [Warum Werbung?](why-ads) {% endcapture %} -
{ notice-2 | markdownify }
\ No newline at end of file +
{{ notice-2 | markdownify }}
diff --git a/_pages/de_DE/Updating-A9LH.txt b/_pages/de_DE/Updating-A9LH.txt index 8d856fd815..d378390f00 100644 --- a/_pages/de_DE/Updating-A9LH.txt +++ b/_pages/de_DE/Updating-A9LH.txt @@ -44,7 +44,7 @@ Die folgenden Schritte werden zudem einige payloads und die AES Key Database akt 4. Kopiere `Hourglass9.bin` aus der Hourglass9 `.zip` in den `/luma/payloads/` Ordner auf deiner SD-Karte und benenne `Hourglass9.bin` um in `start_Hourglass9.bin` 5. Kopiere `arm9loaderhax.bin` aus der SafeA9LHInstaller`.zip` in den `/luma/payloads/` Ordner auf deiner SD-Karte 6. Benenne `arm9loaderhax.bin` aus `/luma/payloads/` um in `down_safea9lhinstaller.bin` -7. Copy the `a9lh` folder from data_input `.zip` to the root of your SD Card +7. Kopiere den `a9lh`-Ordner aus der data_input `.zip` in das Stammverzeichnis deiner SD-Karte 8. Kopiere _den Inhalt_ der arm9loaderhax `.7z` in den `a9lh` Ordner auf deiner SD-Karte 9. Kopiere `arm9loaderhax.bin` aus der Luma3DS `.zip` in das Stammverzeichnis deiner SD-Karte, und überschreibe alle bereits existierenden Dateien 10. Lege die SD-Karte wieder in deinen 3DS ein @@ -55,7 +55,7 @@ Die folgenden Schritte werden zudem einige payloads und die AES Key Database akt 2. Drücke (Select) um arm9loaderhax zu updaten 3. Schalte die Konsole aus und stecke die SD-Karte wieder in deinen PC 4. Lösche den `a9lh` Ordner aus dem Stammverzeichnis deiner SD-Karte -5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` +5. Lösche die `safea9lhinstaller.bin` aus `/luma/payloads/` ##### Abschnitt III - Luma3DS konfigurieren diff --git a/_pages/el_GR/Decrypt9-(Homebrew-Launcher).txt b/_pages/el_GR/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/el_GR/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/el_GR/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/el_GR/Installing-arm9loaderhax.txt b/_pages/el_GR/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/el_GR/Installing-arm9loaderhax.txt +++ b/_pages/el_GR/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/el_GR/Updating-A9LH.txt b/_pages/el_GR/Updating-A9LH.txt index 2e9499fc3c..430678e379 100644 --- a/_pages/el_GR/Updating-A9LH.txt +++ b/_pages/el_GR/Updating-A9LH.txt @@ -27,7 +27,7 @@ These steps will also update your various payloads and the AES key database. #### What you need * [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * The latest release of [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(the `.7z` file)* * The latest release of [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(the `.7z` file)* * The latest release of [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) @@ -44,18 +44,18 @@ These steps will also update your various payloads and the AES key database. 4. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` 5. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card 6. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin` -7. Copy the `a9lh` folder from `data_input_v4.zip` to the root of your SD Card +7. Copy the `a9lh` folder from data_input `.zip` to the root of your SD Card 8. Copy _the contents of_ the arm9loaderhax `.7z` to `a9lh` folder on your SD card 9. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card, overwrite existing files 10. Reinsert your SD card into your 3DS ##### Section II - Payload update -1. Boot the device while holding D-Pad down +1. Reinsert your SD card into your 3DS and boot holding (Select) 2. Press (Select) to update arm9loaderhax 3. Power off the device and put your SD card back in your computer 4. Delete the `a9lh` folder from the root of your SD card -5. Delete `down_safea9lhinstaller.bin` from `/luma/payloads/` +5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` ##### Section III - Configuring Luma3DS diff --git a/_pages/en_PT/2.1.0-ctrtransfer.txt b/_pages/en_PT/2.1.0-ctrtransfer.txt index 094d8fe4ca..8efefa26e1 100644 --- a/_pages/en_PT/2.1.0-ctrtransfer.txt +++ b/_pages/en_PT/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /2.1.0-ctrtransfer.html If you downgrade to 2.1.0 on a 2DS or New 3DS and left Wireless Communication off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up. {: .notice--info} -If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0, make sure to have a microSD card reader on hand before proceeding. +If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. {: .notice--info} Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide. diff --git a/_pages/en_PT/Decrypt9-(Homebrew-Launcher).txt b/_pages/en_PT/Decrypt9-(Homebrew-Launcher).txt index 83b8fbeb6e..d390e42f23 100644 --- a/_pages/en_PT/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/en_PT/Decrypt9-(Homebrew-Launcher).txt @@ -12,16 +12,19 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions +1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer 1. Create a folder named `files9` on the root of your SD card if it does not already exist 2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card 3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card 4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` 5. Reinsert your SD card into your 3DS -6. Enter the homebrew launcher -7. Launch fasthax -8. Once it has completed, press (Start) to exit back to the homebrew launcher +6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +7. Launch fasthax from the list of homebrew + + You may have to scroll down to see this option +8. Once it has completed, press (Start) to exit back to the Homebrew Launcher + This may take several tries -9. Launch safehax +9. Launch safehax from the list of homebrew + + You may have to scroll down to see this option 10. If the exploit was successful, you will have booted into Decrypt9 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) diff --git a/_pages/en_PT/Hardmod-Downgrade.txt b/_pages/en_PT/Hardmod-Downgrade.txt index 4d91fbfbda..b954882031 100644 --- a/_pages/en_PT/Hardmod-Downgrade.txt +++ b/_pages/en_PT/Hardmod-Downgrade.txt @@ -45,7 +45,7 @@ This will work on New 3DS, Old 3DS, and 2DS. 1. Copy and merge the `3ds` folder from the 3DSident `.zip` to your device's SD card 2. Reinsert your SD card into your 3DS -3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the homebrew launcher on the device +3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the Homebrew Launcher on the device 4. Launch 3DSident 5. Verify that the following: + **Kernel version**: 2.50-11 diff --git a/_pages/en_PT/Homebrew-Launcher-(Soundhax).txt b/_pages/en_PT/Homebrew-Launcher-(Soundhax).txt index ce7cbdb3f1..b092e11eab 100644 --- a/_pages/en_PT/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/en_PT/Homebrew-Launcher-(Soundhax).txt @@ -26,7 +26,9 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, 6. Go through all of the bird tips, then close the app normally and reopen it + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 7. Play the SoundHax `.m4a` -8. Your console should load the homebrew menu + + This may take several tries + + If it freezes, just force the console to power off by holding the power button, then try again +8. Your console should load the Homebrew Launcher Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/en_PT/Installing-arm9loaderhax.txt b/_pages/en_PT/Installing-arm9loaderhax.txt index a7ba223d86..a1323ccb66 100644 --- a/_pages/en_PT/Installing-arm9loaderhax.txt +++ b/_pages/en_PT/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ In this section, we will go through the process that all the other steps have le This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install. -The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads by holding buttons on boot. +The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. @@ -31,7 +31,7 @@ Once arm9loaderhax is installed and Luma3DS is setup with the correct options, w During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* -+ **Luma3DS Updater** *(updates our CFW installation easily)* ++ **Luma3DS Updater** *(updates your CFW installation easily)* + **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)* #### What you need @@ -47,7 +47,6 @@ During this process, we also setup programs such as the following: * The latest release of [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) * The latest release of [DspDump](https://github.com/Cruel/DspDump/releases/latest) * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) #### Instructions @@ -66,22 +65,16 @@ During this process, we also setup programs such as the following: 1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system** 2. Create a folder named `cias` on the root of your SD card if it does not already exist -3. **Delete the `a9lh` folder from the root of your SD card if it exists** - + **If you accidentally install arm9loaderhax using another device's `otp.bin`, you will BRICK!** -4. Delete the `3ds` folder from the root of your SD card if it exists -5. **Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card** - + This will include a brand new `3ds` folder to replace the one you just deleted 6. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card -7. **Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card** -8. **Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card** +7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card +8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card 9. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card 10. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card 11. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card -12. **Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files** +12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files 13. Create a folder named `luma` on the root of your SD card 14. Create a folder named `payloads` in the `luma` folder on your SD card 15. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` -16. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` to `up_GodMode9.bin` 17. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card 18. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card 19. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card @@ -95,7 +88,7 @@ During this process, we also setup programs such as the following: + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser) + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen) - + If your wifi switch is off, unplug the 3DS and remove the battery for several seconds to enable wifi + + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + Press (Select) to Full Install + The installer will now install arm9loaderhax on your device (this is very fast) + Shut down your console by pressing any button @@ -103,7 +96,7 @@ During this process, we also setup programs such as the following: ##### Section III - Configuring Luma3DS -1. Hold (Select) on boot to enter the Luma3DS menu +1. Boot your device while holding (Select) to enter the Luma3DS configuration menu + Make sure to start holding the button before pressing power + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_a9lh) + If you boot to SafeA9LHInstaller, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh) @@ -111,7 +104,7 @@ During this process, we also setup programs such as the following: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you should *also* enable the following: +3. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again @@ -124,7 +117,7 @@ During this process, we also setup programs such as the following: If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section. {: .notice--info} -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore" 3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` 4. Press (Start) to reboot @@ -134,16 +127,15 @@ If, before following this guide, you already had an EmuNAND setup and would like + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -2. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) - ##### Section V - Injecting FBI -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** 3. Press (B), then select the "Health&Safety Inject" option 4. Select the FBI injectable `.app` for your region @@ -169,19 +161,19 @@ If, before following this guide, you already had an EmuNAND setup and would like 14. Launch the Homebrew Launcher from the home menu 15. Select "DSP Dump" 16. Press (Start) when prompted to exit -17. Reboot while holding (Start) to launch Hourglass9 -18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -20. Press (Select) on the main menu to eject your SD card -21. Press (Start) to reboot with the SD card removed +17. Boot your device while holding (Start) to enter Hourglass9 +19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +21. Press (Select) on the main menu to eject your SD card +22. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation -22. Use the (A) button and the D-Pad to turn on the following: +23. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -23. If you are using a **New 3DS**, you should *also* enable the following: +24. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -24. Reinsert your SD card, then press (Start) to save and reboot! +25. Reinsert your SD card, then press (Start) to save and reboot! ___ @@ -191,7 +183,7 @@ If DSi / DS functionality has broken (such as DS carts or DSiWare no longer work {% capture notice-10 %} You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. -This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use whatever version you placed in CTR NAND. +This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use the version you placed in CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
@@ -199,7 +191,7 @@ This will only update the Luma3DS files on the SD Card. If you boot the device w {% capture notice-6 %} You will now boot a Custom Firmware based SysNAND by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. -You can now hold (Start) on boot to launch Hourglass9, an arm9loaderhax safe multipurpose NAND and cartridge tool. +You can now hold (Start) on boot to launch Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/es_ES/2.1.0-ctrtransfer.txt b/_pages/es_ES/2.1.0-ctrtransfer.txt index 08363f1407..8069fc6ed1 100644 --- a/_pages/es_ES/2.1.0-ctrtransfer.txt +++ b/_pages/es_ES/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /es_ES/2.1.0-ctrtransfer.html Si al realizar el downgrade a 2.1.0 en una 2DS o New 3DS dejaste la comunicación inalámbrica apagada, se puede rehabilitar sacando la batería, desconectando el cargador por varios segundos y volviendo a encender la consola. {: .notice--info} -Si has estado usando la Gestión de la tarjeta microSD de la New3DS, esta ya no funcionará en la versión 2.1.0. Asegúrate de tener un lector de microSD disponible antes de continuar. +Si has estado usando la Gestión de la tarjeta microSD de la New 3DS para transferir archivos a tu tarjeta SD, esto ya no funcionará en la 2.1.0. Asegúrate de tener un lector de microSD disponible antes de continuar. {: .notice--info} Puede que tu consola no muestre los juegos instalados tras el ctrtransfer. Ésto es debido a que los tickets han sido borrados por la transferencia, motivo por el que se realiza la copia de seguridad. Serán restaurados al final de la guía. diff --git a/_pages/es_ES/Decrypt9-(Homebrew-Launcher).txt b/_pages/es_ES/Decrypt9-(Homebrew-Launcher).txt index a124674a37..15c507eb11 100644 --- a/_pages/es_ES/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/es_ES/Decrypt9-(Homebrew-Launcher).txt @@ -12,16 +12,18 @@ permalink: /es_ES/decrypt9-(homebrew-launcher).html #### Instrucciones -1. Crea una carpeta llamada `files9` en la raíz de tu tarjeta SD, si aún no existe -2. Copia `safehax.3dsx` a la carpeta `/3ds/` en tu tarjeta SD -3. Copia `fasthax.3dsx` a la carpeta `/3ds/` en tu tarjeta SD -4. Copia `Decrypt9WIP.bin` encontrado en el `.zip` de Decrypt9WIP a la raíz de tu tarjeta SD y renombra el archivo `Decrypt9WIP.bin` a `safehaxpayload.bin` -5. Reinserta tu tarjeta SD en tu 3DS -6. Entra al homebrew launcher -7. Ejecuta fasthax -8. Cuando se haya completado, presiona (Start) para volver al homebrew launcher +1. Extrae tu tarjeta SD de tu consola, dejando ésta en el Homebrew Launcher, luego inserta tu tarjeta SD en tu computadora +2. Crea una carpeta llamada `files9` en la raíz de tu tarjeta SD, si aún no existe +3. Copia `safehax.3dsx` a la carpeta `/3ds/` en tu tarjeta SD +4. Copia `fasthax.3dsx` a la carpeta `/3ds/` en tu tarjeta SD +5. Copia `Decrypt9WIP.bin` encontrado en el `.zip` de Decrypt9WIP a la raíz de tu tarjeta SD y renombra el archivo `Decrypt9WIP.bin` a `safehaxpayload.bin` +6. Reinserta tu tarjeta SD en tu 3DS +7. Inicia fasthax desde la lista de homebrew + + Puede que tengas que deslizar hacia abajo para ver esta opción +8. Cuando se haya completado, presiona (Start) para volver al Homebrew Launcher + Esto puede llevar varios intentos -9. Ejecuta safehax +9. Inicia safehax desde la lista de homebrew + + Puede que tengas que deslizar hacia abajo para ver esta opción 10. Si el exploit ha funcionado, habrás iniciado Decryp9 Continúa a [2.1.0 ctrtransfer](2.1.0-ctrtransfer) diff --git a/_pages/es_ES/Hardmod-Downgrade.txt b/_pages/es_ES/Hardmod-Downgrade.txt index 1e32c6ff2e..0481ef9506 100644 --- a/_pages/es_ES/Hardmod-Downgrade.txt +++ b/_pages/es_ES/Hardmod-Downgrade.txt @@ -45,7 +45,7 @@ Esto funcionará en New 3DS, Old 3DS y 2DS. 1. Copia y combina la carpeta `3ds` contenido en el `.zip` de 3DSident en la tarjeta SD de tu consola 2. Reinserta tu tarjeta SD en tu 3DS -3. Usa [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) para ejecutar el homebrew launcher en tu consola +3. Usa [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) para ejecutar el Homebrew Launcher en tu consola 4. Ejecuta 3DSident 5. Verifica lo siguiente: + **Kernel version**: 2.50-11 diff --git a/_pages/es_ES/Homebrew-Launcher-(Soundhax).txt b/_pages/es_ES/Homebrew-Launcher-(Soundhax).txt index 1a0d229907..9c545a86a7 100644 --- a/_pages/es_ES/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/es_ES/Homebrew-Launcher-(Soundhax).txt @@ -18,7 +18,7 @@ SoundHax es compatible con las versiones 9.0.0 hasta la 11.2.0 en las regiones d #### Instrucciones -1. Copia _los contenidos_ de la carpeta `starter` del `starter.zip` en el directorio raíz de tu tarjeta SD +1. Copia _el contenido de_ la carpeta `starter` del `starter.zip` en el directorio raíz de tu tarjeta SD 2. Copia el archivo `.m4a` de SoundHax en la raíz de tu tarjeta SD 3. Copia el otherapp payload a la raíz de tu tarjeta SD y cambia su nombre a `otherapp.bin` 4. Vuelve a insertar tu tarjeta SD en tu 3DS @@ -26,7 +26,9 @@ SoundHax es compatible con las versiones 9.0.0 hasta la 11.2.0 en las regiones d 6. Ve por todos los consejos del pájaro, luego cierra la aplicación y vuélvela a abrir + Ejecutar SoundHax inmediátamente ocasiona que las sugerencias aparezcan en cada ejecución de Nintendo 3DS Sound hasta que hagas esto 7. Reproduce el `.m4a` de SoundHax -8. Tu consola debería cargar el menú de homebrew + + Esto puede llevar varios intentos + + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar +8. Tu consola debería cargar el Homebrew Launcher Continúa a [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/es_ES/Installing-arm9loaderhax.txt b/_pages/es_ES/Installing-arm9loaderhax.txt index 64f70ff6b1..1b27ab1c51 100644 --- a/_pages/es_ES/Installing-arm9loaderhax.txt +++ b/_pages/es_ES/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ En esta sección, pasaremos por el proceso al que todos los pasos anteriores han Este es casi el mejor tipo de exploit posible para la consola pues se instala de forma permanente en las particiones firm del NAND, y se ejecuta antes de que se cargue la mayoría del Sistema Operativo, permitiendo, no sólo funcionar en todas las versiones una vez instalado, sino también protegerse a si mismo y recuperarse de la mayoría de situaciones que brickearían a una 3DS sin A9LH como un Menú HOME no funcional o un título mal instalado. -El archivo 'arm9loaderhax.bin' es el que ejecuta arm9loaderhax después de que se cargue desde la NAND y puede ser cualquier payload de arm9 válido. Este archivo puede ser reemplazado en cualquier momento, aunque Luma3DS permite la ejecución de otras payloads de arm9 manteniendo pulsado botones al inicio. +El archivo 'arm9loaderhax.bin' es el que ejecuta arm9loaderhax después de que se cargue desde la NAND y puede ser cualquier payload de arm9 válido. Este archivo puede ser reemplazado en cualquier momento, aunque Luma3DS permite la ejecución de otros payloads de arm9 utilizando el chainloader de Luma3DS. En este caso, utilizamos Luma3DS de [AuroraWright](https://github.com/AuroraWright/) para ejecutar al inicio un SysNAND modificado directamente, permitiéndonos saltar la necesidad de cualquier EmuNAND, simplificando enormemente el uso de una 3DS hackeada además de ahorrar espacio en la tarjeta SD. @@ -31,7 +31,7 @@ Una vez arm9loaderhax es instalado y Luma3DS configurado correctamente, restaura Durante este proceso, también instalaremos programas como los siguientes: + **FBI** *(instala juegos y aplicaciones en formato CIA)* -+ **Luma3DS Updater** *(actualiza nuestro CFW fácilmente)* ++ **Luma3DS Updater** *(actualiza tu instalación de CFW fácilmente)* + **Hourglass9** *(herramienta multiuso con funciones para la NAND y cartuchos)* #### Qué necesitas @@ -47,7 +47,6 @@ Durante este proceso, también instalaremos programas como los siguientes: * La última versión de [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) * La última versión de [DspDump](https://github.com/Cruel/DspDump/releases/latest) * La última versión de [FBI](https://github.com/Steveice10/FBI/releases/latest) -* La última versión de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * El Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) #### Instrucciones @@ -66,14 +65,9 @@ Durante este proceso, también instalaremos programas como los siguientes: 1. **Si existe, copia la carpeta `/files9/` de tu tarjeta SD a un lugar seguro en tu computadora y haz varias copias de seguridad en varios sitios (como en almacenamiento de archivos en la nube); los archivos que contiene esta carpeta te pueden salvar de una pérdida total de datos si dañas tu 3DS.** 2. Crea una carpeta llamada `cias` en la raíz de tu tarjeta SD, si aún no existe -3. **Elimina la carpeta `a9lh` de la raíz de tu tarjeta SD si existe.** - + **Si accidentalmente instalas arm9loaderhax usando el archivo `otp.bin` de otra consola, ¡la INUTILIZARÁS!** -4. Elimina la carpeta `3ds` de la raíz de tu tarjeta SD si existe -5. **Copia el contenido de la carpeta `starter` en `starter.zip` a la raíz de tu tarjeta SD** - + Esto creará una nueva carpeta '3ds' para reemplazar la que acabas de borrar 6. Copia _el contenido del_ archivo `.7z` de SafeA9LHInstaller a la raíz de tu tarjeta SD -7. **Copia la carpeta `a9lh` contenida en el `.zip` de data_input a la raíz de tu tarjeta SD** -8. **Copia _el contenido del_ archivo `.7z` de la última versión de arm9loaderhax a la carpeta `a9lh` en tu tarjeta SD** +7. Copia la carpeta `a9lh` contenida en el `.zip` de data_input a la raíz de tu tarjeta SD +8. Copia _el contenido_ del archivo `.7z` de la última versión de arm9loaderhax a la carpeta `a9lh` en tu tarjeta SD 9. Copia el archivo `hblauncher_loader.cia` contenido en el `.zip` de hblauncher_loader a la carpeta`/cias/` en tu tarjeta SD 10. Copia el archivo `lumaupdater.cia` contenido en el `.zip` de Luma3DS Updater a la carpeta`/cias/` en tu tarjeta SD 11. Copia el archivo `FBI.cia` contenido en el `.zip` de FBI a la carpeta`/cias/` en tu tarjeta SD @@ -81,7 +75,6 @@ Durante este proceso, también instalaremos programas como los siguientes: 13. Crea una carpeta llamada`luma` en la raíz de tu tarjeta SD 14. Crea una carpeta llamada `payloads` en la carpeta `luma` de tu tarjeta SD 15. Copia el archivo`Hourglass9.bin` contenido en el `.zip` de Hourglass9 a la carpeta `/luma/payloads/` en tu SD y cambia el nombre de `Hourglass9.bin` a `start_Hourglass9.bin` -16. Copia `GodMode9.bin` encontrado en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD y renombra `GodMode9.bin` a `up_GodMode9.bin` 17. Copia `aeskeydb.bin` a la carpeta `/files9/` en tu tarjeta SD 18. Copia `DspDump.3dsx` a la carpeta `/3ds/` en tu tarjeta SD 19. Copia _el contenido de_ `fbi-2.4.2-injectable.zip` a la carpeta `/files9/` en tu tarjeta SD @@ -91,11 +84,11 @@ Durante este proceso, también instalaremos programas como los siguientes: 1. Reinserta tu tarjeta SD en tu 3DS 2. Sigue los pasos para instalar arm9loaderhax en tu consola: + Debes estar en 2.1.0 - + Go to `http://2xrsa.3ds.guide` on your 3DS + + Abre `http://2xrsa.3ds.guide` en tu 3DS + Si tienes un error de "Este servicio no está disponible en tu región", usa la Configuración de la Consola para cambiar el país de tu consola por uno de la misma región que la región del NAND cuando realizaste el ctrtransfer a 2.1.0 + Si te sale otro error, sigue esta [guía de resolución de problemas](troubleshooting#ts_browser) + Si tienes una pantalla defectuosa, sigue esta [guía de resolución de problemas](troubleshooting#ts_browser) - + Si tu interruptor de wifi está apagado, desconecta la 3DS y quita la batería por algunos segundos para activar el wifi + + Si estás en una 2DS o New 3DS y dejaste la comunicación inalámbrica apagada, puedes rehabilitarla sacando la batería, desconectando el cargador por varios segundos y volviendo a encender la consola + Presiona (Select) para una instalación completa (Full Install) + Ahora se instalará arm9loaderhax en tu consola (esto es muy rápido) + Apaga tu consola presionando cualquier botón @@ -103,7 +96,7 @@ Durante este proceso, también instalaremos programas como los siguientes: ##### Sección III - Configuración de Luma3DS -1. Mantén pulsado (Select) al encender la consola para entrar al menú de Luma3DS +1. Enciende tu consola mientras mantienes presionado (Select) para ingresar al menú de configuración de Luma3DS + Asegúrate de iniciar manteniendo pulsado el botón antes de presionar el botón de encendido + Si se queda la pantalla en negro, [sigue la guía de resolución de problemas](troubleshooting#ts_sys_a9lh) + Si accedes a SafeA9LHInstaller al encender, [sigue la guía de resolución de problemas](troubleshooting#ts_safe_a9lh) @@ -111,7 +104,7 @@ Durante este proceso, también instalaremos programas como los siguientes: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. Si estás usando una **New 3DS**, deberías *también* activar lo siguiente: +3. Si estás usando una **New 3DS**, puedes *también* activar lo siguiente: + **"New 3DS CPU" a "Clock+L2(x)"** + Esto aumentará los fotogramas por segundo (FPS) de muchos juegos, pero también podría causar inestabilidad en otros + Si algunos juegos no funcionan correctamente, deshabilita esta opción y vuelve a intentarlo @@ -124,7 +117,7 @@ Durante este proceso, también instalaremos programas como los siguientes: Si, antes de seguir a esta guía, ya tenías una configuración EmuNAND y deseas mover el contenido de tu EmuNAND anterior a tu nuevo CFW SysNAND, ahora es el momento de [seguir Mover EmuNAND](move-emunand) en lugar de hacer los primeros cuatro pasos de esta sección. {: .notice--info} -1. Ejecuta Hourglass9 desde arm9loaderhax manteniendo pulsado (Start) al encender la consola +1. Enciende tu consola mientras presionas (Start) para entrar a Hourglass9 2. Ve a "SysNAND Backup/Restore" 3. Ve a "SysNAND Restore (keep a9lh)" y restaura desde `NANDmin.bin` 4. Presiona (Start) para reiniciar @@ -134,16 +127,15 @@ Si, antes de seguir a esta guía, ya tenías una configuración EmuNAND y deseas + Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copia `firmware.bin` y `cetk` a la carpeta `/luma/` en tu tarjeta SD + Elimina ambos archivos después de actualizar tu 3DS -2. Actualiza tu 3DS dirigiéndote a "Configuración de la consola", luego a "Otras opciones" y después ve al último menú de la derecha y pulsa en "Actualización" +6. Actualiza tu 3DS dirigiéndote a "Configuración de la consola", luego a "Otras opciones" y después ve al último menú de la derecha y pulsa en "Actualización" + Actualizar la consola teniendo A9LH y Luma (lo que acabas de instalar) es seguro, no vuelvas a preguntarlo + La advertencia acerca de nunca actualizar una New 3DS en 2.1.0 no se aplica tras restaurar tu copia de seguridad de la NAND. + Si esto te da un error, ajusta tu configuración de DNS a "obtención automática" + Si esto aún te da un error y tu NAND es inferior a 9.2.0, [sigue el 9.2.0 ctrtransfer](9.2.0-ctrtransfer) - ##### Sección V - Inyectar FBI -1. Ejecuta Hourglass9 desde arm9loaderhax manteniendo pulsado (Start) al encender la consola +1. Enciende tu consola mientras presionas (Start) para entrar a Hourglass9 2. Ve a "SysNAND Backup/Restore", luego selecciona la opción "Health&Safety Dump" para extraer Información sobre salud y seguridad a `hs.app` **(puedes usar las flechas para cambiar el nombre)** 3. Presiona (B), luego selecciona la opción "Health&Safety Inject" 4. Selecciona el `.app` inyectable de FBI correspondiente a tu región @@ -169,19 +161,19 @@ Si, antes de seguir a esta guía, ya tenías una configuración EmuNAND y deseas 14. Inicia el Homebrew Launcher desde el Menú HOME 15. Selecciona "DSP Dump" 16. Presiona (Start) cuando se te solicite para salir -17. Reinicia mientras presionas (Start) para iniciar Hourglass9 -18. Ve a "SysNAND Backup/Restore", luego selecciona "Health&Safety Inject" -19. Selecciona `hs.app` (el original que no contiene FBI), luego presiona (A) y confirma para inyectar -20. Presiona (Select) en el menu principal para expulsar tu tarjeta SD -21. Presiona (Start) para reiniciar sin la tarjeta SD +17. Enciende tu consola mientras presionas (Start) para entrar a Hourglass9 +19. Ve a "SysNAND Backup/Restore", luego selecciona "Health&Safety Inject" +20. Selecciona `hs.app` (el original que no contiene FBI), luego presiona (A) y confirma para inyectar +21. Presiona (Select) en el menu principal para expulsar tu tarjeta SD +22. Presiona (Start) para reiniciar sin la tarjeta SD + Encender la consola sin la tarjeta SD al menos una vez te permitirá configurar la instalación de Luma3DS basada en CTRNAND -22. Presiona el botón (A) y utilica las flechas direccionales para activar lo siguiente: +23. Presiona el botón (A) y utilica las flechas direccionales para activar lo siguiente: + **"Show NAND or user string in System Settings"** -23. Si estás usando una **New 3DS**, deberías *también* activar lo siguiente: +24. Si estás usando una **New 3DS**, puedes *también* activar lo siguiente: + **"New 3DS CPU" a "Clock+L2(x)"** + Esto aumentará los fotogramas por segundo (FPS) de muchos juegos, pero también podría causar inestabilidad en otros + Si algunos juegos no funcionan correctamente, deshabilita esta opción y vuelve a intentarlo -24. ¡Vuelve a insertar la tarjeta SD en la consola, y luego pulsa (Start) para guardar y reiniciar! +25. ¡Vuelve a insertar la tarjeta SD en la consola, y luego pulsa (Start) para guardar y reiniciar! ___ @@ -191,7 +183,7 @@ Si la compatibilidad DSi / DS deja de funcionar (los cartuchos de DS o DSiWare n {% capture notice-10 %} Ahora ya puedes usar Luma3DS Updater para actualizar tu Luma3DS a la última versión con tan solo abrirlo y presionar (A). No es lo mismo que las actualizaciones de sistema, sólo descarga y extrae los archivos de Luma3DS más recientes. -Esto sólo actualizará los archivos de Luma3DS de tu tarjeta SD. Si arrancas la consola sin una tarjeta SD, usará el archivo que tengas instalado en la CTR NAND. +Esto sólo actualizará los archivos de Luma3DS de tu tarjeta SD. Si arrancas la consola sin una tarjeta SD, usará cualquier versión que tengas instalada en la CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
@@ -199,7 +191,7 @@ Esto sólo actualizará los archivos de Luma3DS de tu tarjeta SD. Si arrancas la {% capture notice-6 %} A partir de ahora arrancarás un CFW en la SysNAND por defecto. Ahora puedes mantener pulsado (Select) mientras la consola arranca para acceder al menú de configuración de Luma3DS. -Ahora puedes mantener pulsado (Start) mientras la consola arranca para acceder a Hourglass9, una herramienta multiuso de arm9loaderhax para la gestión de la NAND y de los cartuchos. +Ahora puedes mantener presionado (Start) al encender para entrar en Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/es_ES/Region-Changing.txt b/_pages/es_ES/Region-Changing.txt index 40b465c15e..13d0760ef6 100644 --- a/_pages/es_ES/Region-Changing.txt +++ b/_pages/es_ES/Region-Changing.txt @@ -40,11 +40,12 @@ Cambiar de región usando ctrtranfer (lo cual este método utiliza) parece ser l #### Instrucciones -**Algunas consolas tienen un `SecureInfo_B` en lugar de un `SecureInfo_A`; esto está bien y deberías usar `SecureInfo_B` en los pasos que corresponda** +**Algunas consolas tienen un `SecureInfo_B` en lugar de un `SecureInfo_A`; esto está bien y deberías usar `SecureInfo_B` en los pasos que corresponda** +{: .notice--info} ##### Sección 1 - Preparativos -1. Copia `GodMode9.bin` encontrado en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD y renombra `GodMode9.bin` en `/luma/payloads/` a `up_GodMode9.bin` +1. Copia `GodMode9.bin` contenido en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD 2. Copia el archivo `Decrypt9WIP.bin` a la carpeta `/luma/payloads/` en tu tarjeta SD y renombra `Decrypt9WIP.bin` a `x_Decrypt9WIP.bin` 3. Copia los archivos `.bin` y `.bin.sha` encontrados en el `.zip` del ctrtransfer 9.2.0 a la carpeta `/files9/` en tu tarjeta SD 4. Reinserta tu tarjeta SD en tu 3DS @@ -52,12 +53,13 @@ Cambiar de región usando ctrtranfer (lo cual este método utiliza) parece ser l ##### Sección II - Copia de seguirdad de tickets y configuración de la consola 1. Presiona (Start) y mantén presionado (X) para reiniciar al Decrypt9 de arm9loaderhax -2. Ve a "Ticket/Titlekey Options" y selecciona "Ticket Dump (SysNAND)" -3. Presiona (Select) para extraer tu tarjeta SD e insértala en tu computadora -4. Elimina todos los archivos `.tik` en la carpeta `/files9/` que **no** empiecen por "00-" -5. Deja todos los archivos `.tik` que empiecen por "00-" en la carpeta -6. Reinserta tu tarjeta SD en la 3DS y presiona (B) para volver al Menú Principal -7. Ve a "SysNAND Options", luego a "System Save Dump" y selecciona "Dump configsave.bin" +2. Ve sobre Decrypt9WIP y presiona (A) para iniciarlo +3. Ve a "Ticket/Titlekey Options" y selecciona "Ticket Dump (SysNAND)" +4. Presiona (Select) para extraer tu tarjeta SD e insértala en tu computadora +5. Elimina todos los archivos `.tik` en la carpeta `/files9/` que **no** empiecen por "00-" +6. Deja todos los archivos `.tik` que empiecen por "00-" en la carpeta +7. Reinserta tu tarjeta SD en la 3DS y presiona (B) para volver al Menú Principal +8. Ve a "SysNAND Options", luego a "System Save Dump" y selecciona "Dump configsave.bin" ##### Sección III - ctrtransfer @@ -75,7 +77,7 @@ Cambiar de región usando ctrtranfer (lo cual este método utiliza) parece ser l ##### Sección IV - Edición de SecureInfo -1. Presiona (Start) y mantén pulsado (Arriba) para reiniciar a GodMode9 de arm9loaderhax +1. Presiona (Start) y mantén pulsado (Arriba) para reiniciar a GodMode9 de arm9loaderhax 2. Ve hacia `SYSNAND CTRNAND` -> `rw` -> `sys` 3. Presiona (Y) en `SecureInfo_A` para copiarlo 4. Presiona (Y) para pegar una copia de `SecureInfo_A` @@ -119,7 +121,8 @@ Cambiar de región usando ctrtranfer (lo cual este método utiliza) parece ser l ##### Sección VII - Restaurar configuración de consola -1. Reinicia mientras mantienes presionado (X) para abrir Decrypt9 arm9loaderhax +1. Presiona (Start) y mantén presionado (X) para reiniciar al Decrypt9 de arm9loaderhax +2. Ve sobre Decrypt9WIP y presiona (A) para iniciarlo 2. Ve a "SysNAND Options", luego "System Save Inject" y selecciona "Inject configsave.bin" Las Old 3DS / 2DS pueden necesitar un formateo (usando TinyFormat o la Configuración de la consola) para jugar a juegos con el modo de memoria extendida (como Monster Hunter, Super Smash Bros o Pokémon Sol/Luna). diff --git a/_pages/es_ES/Updating-A9LH.txt b/_pages/es_ES/Updating-A9LH.txt index 4ec503e1c7..00d85ec367 100644 --- a/_pages/es_ES/Updating-A9LH.txt +++ b/_pages/es_ES/Updating-A9LH.txt @@ -27,7 +27,7 @@ Estos pasos también actualizarán tus diversos payloads y la base de datos de c #### Qué necesitas * [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * La última versión de [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(el archivo `.7z`)* * La última versión de [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(el archivo `.7z`)* * La última versión de [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) @@ -44,18 +44,18 @@ Estos pasos también actualizarán tus diversos payloads y la base de datos de c 4. Copia el archivo`Hourglass9.bin` contenido en el `.zip` de Hourglass9 a la carpeta `/luma/payloads/` en tu tarjeta SD y cambia el nombre de `Hourglass9.bin` a `start_Hourglass9.bin` 5. Copia `arm9loaderhax.bin` contenido en el `.zip` de SafeA9LHInstaller a la carpeta `/luma/payloads/` en la tarjeta SD 6. Cambia el nombre de `arm9loaderhax.bin` en `/luma/payloads/` a `down_safea9lhinstaller.bin` -7. Copiar la carpeta `a9lh` contenida en `data_input_v4.zip` a la raíz de tu tarjeta SD +7. Copia la carpeta `a9lh` contenida en el archivo `.zip` de data_input a la raíz de tu tarjeta SD 8. Copia _el contenido del_ archivo `.7z` de arm9loaderhax a la carpeta `a9lh` en tu tarjeta SD 9. Copia el archivo `arm9loaderhax.bin` contenido en el archivo `.zip` de Luma3DS a la raíz de tu tarjeta SD, sobrescribe los archivos existentes 10. Reinserta tu tarjeta SD en tu 3DS ##### Sección II - Actualización de payload -1. Enciende la consola manteniendo presionada la flecha direccional abajo +1. Inserta tu tarjeta SD en tu 3DS y enciéndela manteniendo presionado (Select) 2. Presiona (Select) para actualizar arm9loaderhax 3. Apaga la consola y vuelve a insertar la tarjeta SD en tu computadora 4. Elimina la carpeta `a9lh` de la raíz de tu tarjeta SD -5. Borra `down_safea9lhinstaller.bin` de `/luma/payloads` +5. Elimina `safea9lhinstaller.bin` de `/luma/payloads` ##### Sección III - Configuración de Luma3DS diff --git a/_pages/fi_FI/Decrypt9-(Homebrew-Launcher).txt b/_pages/fi_FI/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/fi_FI/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/fi_FI/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/fi_FI/Installing-arm9loaderhax.txt b/_pages/fi_FI/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/fi_FI/Installing-arm9loaderhax.txt +++ b/_pages/fi_FI/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/fr_FR/9.2.0-ctrtransfer.txt b/_pages/fr_FR/9.2.0-ctrtransfer.txt index ccfecf65a5..aaf489129f 100644 --- a/_pages/fr_FR/9.2.0-ctrtransfer.txt +++ b/_pages/fr_FR/9.2.0-ctrtransfer.txt @@ -49,7 +49,7 @@ L'objectif du CTRtransfer vers la version 9.2.0 étant de résoudre les problèm ##### Section III - CTRtransfer 1. Allez dans "SysNAND Options", puis "CTRNAND Transfer", puis "Auto CTRNAND Transfer" -2. Entrez la combinaison de touches indiquées, puis sélectionnez l'image de ctrtransfer 2.1.0 en appuyant sur (A) lorsqu'on vous le demande +2. Entrez la combinaison de touches indiquées, puis sélectionnez l'image de CTRtransfer 9.2.0 en appuyant sur (A) lorsqu'on vous le demande 3. Si vous n'avez pas de sauvegarde de votre NAND, **Sauvegardez (backup) votre SysNAND vers le fichier `NANDmin.bin` en appuyant sur (A) quand vous y êtes invité** 4. Laissez le transfert suivre son cours, cela peut prendre du temps 5. Une fois le transfert terminé, appuyez sur (Select) pour éjecter votre carte SD diff --git a/_pages/fr_FR/Decrypt9-(Homebrew-Launcher).txt b/_pages/fr_FR/Decrypt9-(Homebrew-Launcher).txt index cc1f105d65..990de2fbd9 100644 --- a/_pages/fr_FR/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/fr_FR/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /fr_FR/decrypt9-(homebrew-launcher).html ##### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Créez un dossier nommé `files9` à la racine de votre carte SD si celui-ci n'existe pas déjà -2. Copiez `safehax.3dsx` dans le dossier `/3ds/` sur votre carte SD -3. Copiez `fasthax.3dsx` dans le dossier `/3ds/` sur votre carte SD -4. Copiez le fichier `Decrypt9WIP.bin` contenu dans le `.zip` de Decrypt9WIP à la racine de votre carte SD et renommez `Decrypt9WIP.bin` en `safehaxpayload.bin` -5. Réinsérez votre carte SD dans la console -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Créez un dossier nommé `files9` à la racine de votre carte SD si celui-ci n'existe pas déjà +3. Copiez `safehax.3dsx` dans le dossier `/3ds/` sur votre carte SD +4. Copiez `fasthax.3dsx` dans le dossier `/3ds/` sur votre carte SD +5. Copiez le fichier `Decrypt9WIP.bin` contenu dans le `.zip` de Decrypt9WIP à la racine de votre carte SD et renommez `Decrypt9WIP.bin` en `safehaxpayload.bin` +6. Réinsérez votre carte SD dans la console 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/fr_FR/Installing-arm9loaderhax.txt b/_pages/fr_FR/Installing-arm9loaderhax.txt index af7ff73fe5..822aa1f68b 100644 --- a/_pages/fr_FR/Installing-arm9loaderhax.txt +++ b/_pages/fr_FR/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ Si, avant de suivre ce guide, vous aviez déjà installé une EmuNAND et que vou {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Sélectionnez "SysNAND Backup/Restore" -4. Sélectionnez "SysNAND Restore (keep a9lh)" et restaurez votre fichier `NANDmin.bin` -5. Appuyez sur (Start) pour redémarrer +2. Sélectionnez "SysNAND Backup/Restore" +3. Sélectionnez "SysNAND Restore (keep a9lh)" et restaurez votre fichier `NANDmin.bin` +4. Appuyez sur (Start) pour redémarrer + Si vous obtenez un écran noir, suivez les instructions du [downgrade en 9.2.0 (CTRtransfer)](9.2.0-ctrtransfer) -6. Si votre sauvegarde est une version comprise entre 3.0.0 et 4.5.0, votre console ne redémarrera pas tant que vous ne téléchargez pas le firmware requis: +5. Si votre sauvegarde est une version comprise entre 3.0.0 et 4.5.0, votre console ne redémarrera pas tant que vous ne téléchargez pas le firmware requis: + Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) et renommez-le `firmware.bin` + Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copiez les fichiers `firmware.bin` et `cetk` dans le dossier `/luma/` de votre carte SD + Effacez ces 2 fichiers après avoir mis à jour votre 3DS -7. Mettez à jour votre 3DS en allant dans les Paramètres de la console puis "Autres paramètres", puis tout à droite sélectionnez "Mise à jour du système" +6. Mettez à jour votre 3DS en allant dans les Paramètres de la console puis "Autres paramètres", puis tout à droite sélectionnez "Mise à jour du système" + Mettre à jour sa console une fois que A9LH et Luma sont installés (ce que vous avez maintenant) ne pose aucun problème, arrêtez de poser la question + L'avertissement interdisant de faire une mise à jour sur une New 3DS en 2.1.0 ne s'applique plus après avoir restauré la sauvegarde de votre NAND. + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique" @@ -136,12 +136,12 @@ Si, avant de suivre ce guide, vous aviez déjà installé une EmuNAND et que vou ##### Section V - Injection de FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Sélectionnez "SysNAND Backup/Restore", puis l'option "Health&Safety Dump" pour copier l'application Santé et Sécurité dans le fichier `hs.app` **(Vous pouvez appuyer sur haut et bas / gauche et droite pour changer le nom)** -4. Appuyez sur (B), puis sélectionnez l'option "Health&Safety Inject" -5. Sélectionnez le fichier injectable FBI `.app` correspondant à votre région -6. Appuyez sur (A) pour confirmer l'injection -7. Appuyez sur (Start) pour redémarrer -8. Si l'application Santé et Sécurité se lance toujours et que vous aviez downgradé avec Gateway dans le passé, suivez [ce guide de dépannage](troubleshooting#gw_fbi) +2. Sélectionnez "SysNAND Backup/Restore", puis l'option "Health&Safety Dump" pour copier l'application Santé et Sécurité dans le fichier `hs.app` **(Vous pouvez appuyer sur haut et bas / gauche et droite pour changer le nom)** +3. Appuyez sur (B), puis sélectionnez l'option "Health&Safety Inject" +4. Sélectionnez le fichier injectable FBI `.app` correspondant à votre région +5. Appuyez sur (A) pour confirmer l'injection +6. Appuyez sur (Start) pour redémarrer +7. Si l'application Santé et Sécurité se lance toujours et que vous aviez downgradé avec Gateway dans le passé, suivez [ce guide de dépannage](troubleshooting#gw_fbi) ##### Section VI - Finalisation de l'installation diff --git a/_pages/he_IL/2.1.0-ctrtransfer.txt b/_pages/he_IL/2.1.0-ctrtransfer.txt index 4eb803038c..32ad9dbf4c 100644 --- a/_pages/he_IL/2.1.0-ctrtransfer.txt +++ b/_pages/he_IL/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /2.1.0-ctrtransfer.html אם שנמכתם לגירסה 2.1.0 על 2DS או על New 3DS והשארתם את החיבור לרשת כבוי, ניתן להפעיל את החיבור לרשת מחדש על הוצאה של הסוללה והמטען למספר שניות והדלקה מחדש. {: .notice--info} -אם השתמשתם עד כה בפונקצית microSD Management על מנת להעביר קבצים ל-SD, זה לא יעבוד יותר, על כן, תצטרכו להשיג קורא כרטיסי microSD. +If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. {: .notice--info} הקונסולה שלכם לא תראה משחקים מותקנים לאחר ctrtransfer. זה מכיוון שקבצי ה-ticket שלכם נמחקו בעקבות ההעברה, לכן נבצע גיבוי. נשחזר הכל לקראת סוף המדריך. diff --git a/_pages/he_IL/Decrypt9-(Homebrew-Launcher).txt b/_pages/he_IL/Decrypt9-(Homebrew-Launcher).txt index 83b8fbeb6e..0a396fe5a6 100644 --- a/_pages/he_IL/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/he_IL/Decrypt9-(Homebrew-Launcher).txt @@ -12,16 +12,18 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the homebrew launcher -7. Launch fasthax -8. Once it has completed, press (Start) to exit back to the homebrew launcher +1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS +7. Launch fasthax from the list of homebrew + + You may have to scroll down to see this option +8. Once it has completed, press (Start) to exit back to the Homebrew Launcher + This may take several tries -9. Launch safehax +9. Launch safehax from the list of homebrew + + You may have to scroll down to see this option 10. If the exploit was successful, you will have booted into Decrypt9 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) diff --git a/_pages/he_IL/Hardmod-Downgrade.txt b/_pages/he_IL/Hardmod-Downgrade.txt index 4d91fbfbda..b954882031 100644 --- a/_pages/he_IL/Hardmod-Downgrade.txt +++ b/_pages/he_IL/Hardmod-Downgrade.txt @@ -45,7 +45,7 @@ This will work on New 3DS, Old 3DS, and 2DS. 1. Copy and merge the `3ds` folder from the 3DSident `.zip` to your device's SD card 2. Reinsert your SD card into your 3DS -3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the homebrew launcher on the device +3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the Homebrew Launcher on the device 4. Launch 3DSident 5. Verify that the following: + **Kernel version**: 2.50-11 diff --git a/_pages/he_IL/Homebrew-Launcher-(Soundhax).txt b/_pages/he_IL/Homebrew-Launcher-(Soundhax).txt index ce7cbdb3f1..b092e11eab 100644 --- a/_pages/he_IL/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/he_IL/Homebrew-Launcher-(Soundhax).txt @@ -26,7 +26,9 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, 6. Go through all of the bird tips, then close the app normally and reopen it + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 7. Play the SoundHax `.m4a` -8. Your console should load the homebrew menu + + This may take several tries + + If it freezes, just force the console to power off by holding the power button, then try again +8. Your console should load the Homebrew Launcher Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/he_IL/Installing-arm9loaderhax.txt b/_pages/he_IL/Installing-arm9loaderhax.txt index a7ba223d86..a1323ccb66 100644 --- a/_pages/he_IL/Installing-arm9loaderhax.txt +++ b/_pages/he_IL/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ In this section, we will go through the process that all the other steps have le This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install. -The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads by holding buttons on boot. +The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. @@ -31,7 +31,7 @@ Once arm9loaderhax is installed and Luma3DS is setup with the correct options, w During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* -+ **Luma3DS Updater** *(updates our CFW installation easily)* ++ **Luma3DS Updater** *(updates your CFW installation easily)* + **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)* #### What you need @@ -47,7 +47,6 @@ During this process, we also setup programs such as the following: * The latest release of [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) * The latest release of [DspDump](https://github.com/Cruel/DspDump/releases/latest) * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) #### Instructions @@ -66,22 +65,16 @@ During this process, we also setup programs such as the following: 1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system** 2. Create a folder named `cias` on the root of your SD card if it does not already exist -3. **Delete the `a9lh` folder from the root of your SD card if it exists** - + **If you accidentally install arm9loaderhax using another device's `otp.bin`, you will BRICK!** -4. Delete the `3ds` folder from the root of your SD card if it exists -5. **Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card** - + This will include a brand new `3ds` folder to replace the one you just deleted 6. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card -7. **Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card** -8. **Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card** +7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card +8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card 9. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card 10. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card 11. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card -12. **Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files** +12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files 13. Create a folder named `luma` on the root of your SD card 14. Create a folder named `payloads` in the `luma` folder on your SD card 15. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` -16. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` to `up_GodMode9.bin` 17. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card 18. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card 19. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card @@ -95,7 +88,7 @@ During this process, we also setup programs such as the following: + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser) + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen) - + If your wifi switch is off, unplug the 3DS and remove the battery for several seconds to enable wifi + + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + Press (Select) to Full Install + The installer will now install arm9loaderhax on your device (this is very fast) + Shut down your console by pressing any button @@ -103,7 +96,7 @@ During this process, we also setup programs such as the following: ##### Section III - Configuring Luma3DS -1. Hold (Select) on boot to enter the Luma3DS menu +1. Boot your device while holding (Select) to enter the Luma3DS configuration menu + Make sure to start holding the button before pressing power + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_a9lh) + If you boot to SafeA9LHInstaller, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh) @@ -111,7 +104,7 @@ During this process, we also setup programs such as the following: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you should *also* enable the following: +3. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again @@ -124,7 +117,7 @@ During this process, we also setup programs such as the following: If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section. {: .notice--info} -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore" 3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` 4. Press (Start) to reboot @@ -134,16 +127,15 @@ If, before following this guide, you already had an EmuNAND setup and would like + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -2. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) - ##### Section V - Injecting FBI -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** 3. Press (B), then select the "Health&Safety Inject" option 4. Select the FBI injectable `.app` for your region @@ -169,19 +161,19 @@ If, before following this guide, you already had an EmuNAND setup and would like 14. Launch the Homebrew Launcher from the home menu 15. Select "DSP Dump" 16. Press (Start) when prompted to exit -17. Reboot while holding (Start) to launch Hourglass9 -18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -20. Press (Select) on the main menu to eject your SD card -21. Press (Start) to reboot with the SD card removed +17. Boot your device while holding (Start) to enter Hourglass9 +19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +21. Press (Select) on the main menu to eject your SD card +22. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation -22. Use the (A) button and the D-Pad to turn on the following: +23. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -23. If you are using a **New 3DS**, you should *also* enable the following: +24. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -24. Reinsert your SD card, then press (Start) to save and reboot! +25. Reinsert your SD card, then press (Start) to save and reboot! ___ @@ -191,7 +183,7 @@ If DSi / DS functionality has broken (such as DS carts or DSiWare no longer work {% capture notice-10 %} You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. -This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use whatever version you placed in CTR NAND. +This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use the version you placed in CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
@@ -199,7 +191,7 @@ This will only update the Luma3DS files on the SD Card. If you boot the device w {% capture notice-6 %} You will now boot a Custom Firmware based SysNAND by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. -You can now hold (Start) on boot to launch Hourglass9, an arm9loaderhax safe multipurpose NAND and cartridge tool. +You can now hold (Start) on boot to launch Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/he_IL/Region-Changing.txt b/_pages/he_IL/Region-Changing.txt index 7097015a28..3fe40b9841 100644 --- a/_pages/he_IL/Region-Changing.txt +++ b/_pages/he_IL/Region-Changing.txt @@ -40,11 +40,12 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot #### Instructions -**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +{: .notice--info} ##### Section I - Prep work -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` +1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 2. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin` 3. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card 4. Reinsert your SD card into your 3DS @@ -52,12 +53,13 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section II - Backup tickets and config save 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 -2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" -3. Press (Select) to eject your SD card, then put it in your computer -4. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" -5. Leave all the `.tik` files that do start with "00-" in the folder -6. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu -7. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" +2. Hover over Decrypt9WIP, then press (A) to launch it +3. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" +4. Press (Select) to eject your SD card, then put it in your computer +5. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" +6. Leave all the `.tik` files that do start with "00-" in the folder +7. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu +8. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" ##### Section III - ctrtransfer @@ -75,7 +77,7 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section IV - Editing SecureInfo -1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 +1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 2. Navigate to `SYSNAND CTRNAND` -> `rw` -> `sys` 3. Press (Y) on `SecureInfo_A` to copy it 4. Press (Y) to paste a copy of `SecureInfo_A` @@ -119,7 +121,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section VII - Restore config save -1. Reboot holding (X) during boot to launch arm9loaderhax Decrypt9 +1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 +2. Hover over Decrypt9WIP, then press (A) to launch it 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). diff --git a/_pages/he_IL/Updating-A9LH.txt b/_pages/he_IL/Updating-A9LH.txt index 2e9499fc3c..430678e379 100644 --- a/_pages/he_IL/Updating-A9LH.txt +++ b/_pages/he_IL/Updating-A9LH.txt @@ -27,7 +27,7 @@ These steps will also update your various payloads and the AES key database. #### What you need * [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * The latest release of [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(the `.7z` file)* * The latest release of [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(the `.7z` file)* * The latest release of [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) @@ -44,18 +44,18 @@ These steps will also update your various payloads and the AES key database. 4. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` 5. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card 6. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin` -7. Copy the `a9lh` folder from `data_input_v4.zip` to the root of your SD Card +7. Copy the `a9lh` folder from data_input `.zip` to the root of your SD Card 8. Copy _the contents of_ the arm9loaderhax `.7z` to `a9lh` folder on your SD card 9. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card, overwrite existing files 10. Reinsert your SD card into your 3DS ##### Section II - Payload update -1. Boot the device while holding D-Pad down +1. Reinsert your SD card into your 3DS and boot holding (Select) 2. Press (Select) to update arm9loaderhax 3. Power off the device and put your SD card back in your computer 4. Delete the `a9lh` folder from the root of your SD card -5. Delete `down_safea9lhinstaller.bin` from `/luma/payloads/` +5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` ##### Section III - Configuring Luma3DS diff --git a/_pages/hu_HU/2.1.0-ctrtransfer.txt b/_pages/hu_HU/2.1.0-ctrtransfer.txt index 094d8fe4ca..8efefa26e1 100644 --- a/_pages/hu_HU/2.1.0-ctrtransfer.txt +++ b/_pages/hu_HU/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /2.1.0-ctrtransfer.html If you downgrade to 2.1.0 on a 2DS or New 3DS and left Wireless Communication off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up. {: .notice--info} -If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0, make sure to have a microSD card reader on hand before proceeding. +If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. {: .notice--info} Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide. diff --git a/_pages/hu_HU/Decrypt9-(Homebrew-Launcher).txt b/_pages/hu_HU/Decrypt9-(Homebrew-Launcher).txt index 83b8fbeb6e..0a396fe5a6 100644 --- a/_pages/hu_HU/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/hu_HU/Decrypt9-(Homebrew-Launcher).txt @@ -12,16 +12,18 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the homebrew launcher -7. Launch fasthax -8. Once it has completed, press (Start) to exit back to the homebrew launcher +1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS +7. Launch fasthax from the list of homebrew + + You may have to scroll down to see this option +8. Once it has completed, press (Start) to exit back to the Homebrew Launcher + This may take several tries -9. Launch safehax +9. Launch safehax from the list of homebrew + + You may have to scroll down to see this option 10. If the exploit was successful, you will have booted into Decrypt9 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) diff --git a/_pages/hu_HU/Hardmod-Downgrade.txt b/_pages/hu_HU/Hardmod-Downgrade.txt index 4d91fbfbda..b954882031 100644 --- a/_pages/hu_HU/Hardmod-Downgrade.txt +++ b/_pages/hu_HU/Hardmod-Downgrade.txt @@ -45,7 +45,7 @@ This will work on New 3DS, Old 3DS, and 2DS. 1. Copy and merge the `3ds` folder from the 3DSident `.zip` to your device's SD card 2. Reinsert your SD card into your 3DS -3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the homebrew launcher on the device +3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the Homebrew Launcher on the device 4. Launch 3DSident 5. Verify that the following: + **Kernel version**: 2.50-11 diff --git a/_pages/hu_HU/Homebrew-Launcher-(Soundhax).txt b/_pages/hu_HU/Homebrew-Launcher-(Soundhax).txt index ce7cbdb3f1..b092e11eab 100644 --- a/_pages/hu_HU/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/hu_HU/Homebrew-Launcher-(Soundhax).txt @@ -26,7 +26,9 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, 6. Go through all of the bird tips, then close the app normally and reopen it + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 7. Play the SoundHax `.m4a` -8. Your console should load the homebrew menu + + This may take several tries + + If it freezes, just force the console to power off by holding the power button, then try again +8. Your console should load the Homebrew Launcher Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/hu_HU/Installing-arm9loaderhax.txt b/_pages/hu_HU/Installing-arm9loaderhax.txt index a7ba223d86..a1323ccb66 100644 --- a/_pages/hu_HU/Installing-arm9loaderhax.txt +++ b/_pages/hu_HU/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ In this section, we will go through the process that all the other steps have le This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install. -The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads by holding buttons on boot. +The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. @@ -31,7 +31,7 @@ Once arm9loaderhax is installed and Luma3DS is setup with the correct options, w During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* -+ **Luma3DS Updater** *(updates our CFW installation easily)* ++ **Luma3DS Updater** *(updates your CFW installation easily)* + **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)* #### What you need @@ -47,7 +47,6 @@ During this process, we also setup programs such as the following: * The latest release of [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) * The latest release of [DspDump](https://github.com/Cruel/DspDump/releases/latest) * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) #### Instructions @@ -66,22 +65,16 @@ During this process, we also setup programs such as the following: 1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system** 2. Create a folder named `cias` on the root of your SD card if it does not already exist -3. **Delete the `a9lh` folder from the root of your SD card if it exists** - + **If you accidentally install arm9loaderhax using another device's `otp.bin`, you will BRICK!** -4. Delete the `3ds` folder from the root of your SD card if it exists -5. **Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card** - + This will include a brand new `3ds` folder to replace the one you just deleted 6. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card -7. **Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card** -8. **Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card** +7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card +8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card 9. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card 10. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card 11. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card -12. **Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files** +12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files 13. Create a folder named `luma` on the root of your SD card 14. Create a folder named `payloads` in the `luma` folder on your SD card 15. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` -16. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` to `up_GodMode9.bin` 17. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card 18. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card 19. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card @@ -95,7 +88,7 @@ During this process, we also setup programs such as the following: + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser) + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen) - + If your wifi switch is off, unplug the 3DS and remove the battery for several seconds to enable wifi + + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + Press (Select) to Full Install + The installer will now install arm9loaderhax on your device (this is very fast) + Shut down your console by pressing any button @@ -103,7 +96,7 @@ During this process, we also setup programs such as the following: ##### Section III - Configuring Luma3DS -1. Hold (Select) on boot to enter the Luma3DS menu +1. Boot your device while holding (Select) to enter the Luma3DS configuration menu + Make sure to start holding the button before pressing power + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_a9lh) + If you boot to SafeA9LHInstaller, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh) @@ -111,7 +104,7 @@ During this process, we also setup programs such as the following: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you should *also* enable the following: +3. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again @@ -124,7 +117,7 @@ During this process, we also setup programs such as the following: If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section. {: .notice--info} -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore" 3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` 4. Press (Start) to reboot @@ -134,16 +127,15 @@ If, before following this guide, you already had an EmuNAND setup and would like + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -2. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) - ##### Section V - Injecting FBI -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** 3. Press (B), then select the "Health&Safety Inject" option 4. Select the FBI injectable `.app` for your region @@ -169,19 +161,19 @@ If, before following this guide, you already had an EmuNAND setup and would like 14. Launch the Homebrew Launcher from the home menu 15. Select "DSP Dump" 16. Press (Start) when prompted to exit -17. Reboot while holding (Start) to launch Hourglass9 -18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -20. Press (Select) on the main menu to eject your SD card -21. Press (Start) to reboot with the SD card removed +17. Boot your device while holding (Start) to enter Hourglass9 +19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +21. Press (Select) on the main menu to eject your SD card +22. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation -22. Use the (A) button and the D-Pad to turn on the following: +23. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -23. If you are using a **New 3DS**, you should *also* enable the following: +24. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -24. Reinsert your SD card, then press (Start) to save and reboot! +25. Reinsert your SD card, then press (Start) to save and reboot! ___ @@ -191,7 +183,7 @@ If DSi / DS functionality has broken (such as DS carts or DSiWare no longer work {% capture notice-10 %} You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. -This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use whatever version you placed in CTR NAND. +This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use the version you placed in CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
@@ -199,7 +191,7 @@ This will only update the Luma3DS files on the SD Card. If you boot the device w {% capture notice-6 %} You will now boot a Custom Firmware based SysNAND by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. -You can now hold (Start) on boot to launch Hourglass9, an arm9loaderhax safe multipurpose NAND and cartridge tool. +You can now hold (Start) on boot to launch Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/hu_HU/Region-Changing.txt b/_pages/hu_HU/Region-Changing.txt index 7097015a28..3fe40b9841 100644 --- a/_pages/hu_HU/Region-Changing.txt +++ b/_pages/hu_HU/Region-Changing.txt @@ -40,11 +40,12 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot #### Instructions -**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +{: .notice--info} ##### Section I - Prep work -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` +1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 2. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin` 3. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card 4. Reinsert your SD card into your 3DS @@ -52,12 +53,13 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section II - Backup tickets and config save 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 -2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" -3. Press (Select) to eject your SD card, then put it in your computer -4. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" -5. Leave all the `.tik` files that do start with "00-" in the folder -6. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu -7. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" +2. Hover over Decrypt9WIP, then press (A) to launch it +3. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" +4. Press (Select) to eject your SD card, then put it in your computer +5. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" +6. Leave all the `.tik` files that do start with "00-" in the folder +7. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu +8. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" ##### Section III - ctrtransfer @@ -75,7 +77,7 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section IV - Editing SecureInfo -1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 +1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 2. Navigate to `SYSNAND CTRNAND` -> `rw` -> `sys` 3. Press (Y) on `SecureInfo_A` to copy it 4. Press (Y) to paste a copy of `SecureInfo_A` @@ -119,7 +121,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section VII - Restore config save -1. Reboot holding (X) during boot to launch arm9loaderhax Decrypt9 +1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 +2. Hover over Decrypt9WIP, then press (A) to launch it 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). diff --git a/_pages/hu_HU/Site-Navigation.txt b/_pages/hu_HU/Site-Navigation.txt index f18f1900da..110e6d3705 100644 --- a/_pages/hu_HU/Site-Navigation.txt +++ b/_pages/hu_HU/Site-Navigation.txt @@ -7,20 +7,18 @@ sitemap: false --- {% capture notice-1 %} - **Popular** + + [Installing arm9loaderhax](installing-arm9loaderhax) + [NFIRM Downgrade](nfirm-downgrade) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) + [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) - {% endcapture %} -
{{ notice-1 | markdownify }}
{% capture notice-2 %} - **All** + + [2.1.0 ctrtransfer](2.1.0-ctrtransfer) + [9.2.0 ctrtransfer](9.2.0-ctrtransfer) + [Cart Update](cart-update) @@ -48,7 +46,5 @@ sitemap: false + [Troubleshooting](troubleshooting) + [Updating A9LH](updating-a9lh) + [Why Ads?](why-ads) - {% endcapture %} -
{{ notice-2 | markdownify }}
\ No newline at end of file diff --git a/_pages/hu_HU/Updating-A9LH.txt b/_pages/hu_HU/Updating-A9LH.txt index 2e9499fc3c..430678e379 100644 --- a/_pages/hu_HU/Updating-A9LH.txt +++ b/_pages/hu_HU/Updating-A9LH.txt @@ -27,7 +27,7 @@ These steps will also update your various payloads and the AES key database. #### What you need * [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * The latest release of [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(the `.7z` file)* * The latest release of [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(the `.7z` file)* * The latest release of [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) @@ -44,18 +44,18 @@ These steps will also update your various payloads and the AES key database. 4. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` 5. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card 6. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin` -7. Copy the `a9lh` folder from `data_input_v4.zip` to the root of your SD Card +7. Copy the `a9lh` folder from data_input `.zip` to the root of your SD Card 8. Copy _the contents of_ the arm9loaderhax `.7z` to `a9lh` folder on your SD card 9. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card, overwrite existing files 10. Reinsert your SD card into your 3DS ##### Section II - Payload update -1. Boot the device while holding D-Pad down +1. Reinsert your SD card into your 3DS and boot holding (Select) 2. Press (Select) to update arm9loaderhax 3. Power off the device and put your SD card back in your computer 4. Delete the `a9lh` folder from the root of your SD card -5. Delete `down_safea9lhinstaller.bin` from `/luma/payloads/` +5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` ##### Section III - Configuring Luma3DS diff --git a/_pages/it_IT/2.1.0-ctrtransfer.txt b/_pages/it_IT/2.1.0-ctrtransfer.txt index d4a008dbcf..85e36b9b41 100644 --- a/_pages/it_IT/2.1.0-ctrtransfer.txt +++ b/_pages/it_IT/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /it_IT/2.1.0-ctrtransfer.html Se effettui il downgrade alla versione del software di sistema 2.1.0 su un 2DS o su un New 3DS lasciando inattiva la comunicazione wireless, puoi riattivarla rimuovendo l'alimentatore e la batteria per alcuni secondi prima di accendere la console. {: .notice--info} -Se stai usando la Gestione microSD del New 3DS per trasferire i file sulla tua scheda SD, tieni presente che non è utilizzabile nella versione del software 2.1.0. Assicurati di avere un lettore di microSD a portata di mano prima di proseguire. +Se stavi utilizzando la Gestione dati del New 3DS per trasferire i file sulla scheda SD, tieni presente che non sarà più utilizzabile una volta eseguito il downgrade alla versione di sistema 2.1.0. Assicurati di aver disponibile un lettore di schede microSD prima di procedere. {: .notice--info} La tua console potrebbe non visualizzare più i giochi installati dopo il ctrtransfer. La causa è la rimozione dei ticket durante il trasferimento, per cui è necessario effettuarne il backup. Verranno ripristinati al termine della guida. diff --git a/_pages/it_IT/Decrypt9-(Homebrew-Launcher).txt b/_pages/it_IT/Decrypt9-(Homebrew-Launcher).txt index 7329e16717..ca24064ed8 100644 --- a/_pages/it_IT/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/it_IT/Decrypt9-(Homebrew-Launcher).txt @@ -12,16 +12,18 @@ permalink: /it_IT/decrypt9-(homebrew-launcher).html #### Istruzioni -1. Se assente, crea una cartella nella root della tua scheda SD e rinominala `files9` -2. Copia il file `safehax.3dsx` nella cartella `/3ds/` nella tua scheda SD -3. Copia il file `fasthax.3dsx` nella cartella `/3ds/` nella tua scheda SD -4. Copia il file `Decrypt9WIP.bin` dall'archivio `.zip` di Decrypt9WIP nella root della tua scheda SD e rinominalo in `safehaxpayload.bin` -5. Reinserisci la scheda SD nel 3DS -6. Avvia l'homebrew launcher -7. Avvia fasthax -8. Al completamento, premi (Start) per tornare al menu dell'homebrew launcher +1. Rimuovi la scheda SD dalla tua console lasciando però l'Homebrew Launcher in esecuzione, quindi inserisci la scheda SD nel tuo computer +2. Se assente, crea una cartella nella root della tua scheda SD e rinominala `files9` +3. Copia il file `safehax.3dsx` nella cartella `/3ds/` nella tua scheda SD +4. Copia il file `fasthax.3dsx` nella cartella `/3ds/` nella tua scheda SD +5. Copia il file `Decrypt9WIP.bin` dall'archivio `.zip` di Decrypt9WIP nella root della tua scheda SD e rinominalo in `safehaxpayload.bin` +6. Reinserisci la scheda SD nel 3DS +7. Avvia fasthax dalla lista degli homebrew disponibili + + Potrebbe essere necessario scorrere la lista per visualizzare l'homebrew +8. Al completamento, premi (Start) per tornare al menu dell'Homebrew Launcher + Potrebbero essere necessari più tentativi -9. Avvia safehax +9. Avvia safehax dalla lista degli homebrew disponibili + + Potrebbe essere necessario scorrere la lista per visualizzare l'homebrew 10. Se l'exploit è andato a buon fine, si avvierà Decrypt9 Prosegui con il [ctrtransfer 2.1.0](2.1.0-ctrtransfer) diff --git a/_pages/it_IT/Hardmod-Downgrade.txt b/_pages/it_IT/Hardmod-Downgrade.txt index 3cc20473b2..33b3bc7292 100644 --- a/_pages/it_IT/Hardmod-Downgrade.txt +++ b/_pages/it_IT/Hardmod-Downgrade.txt @@ -45,7 +45,7 @@ Questa guida può essere applicata su New 3DS, Old 3DS e 2DS. 1. Copia e unisci la cartella `3ds` presente nell'archivio `.zip` di 3DSident con quella presente nella scheda SD della tua console 2. Reinserisci la scheda SD nel Nintendo 3DS -3. Avvia l'homebrew launcher tramite [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) +3. Avvia l'Homebrew Launcher tramite [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) 4. Avvia 3DSident 5. Verifica le seguenti righe di testo: + **Kernel version**: 2.50-11 diff --git a/_pages/it_IT/Homebrew-Launcher-(Soundhax).txt b/_pages/it_IT/Homebrew-Launcher-(Soundhax).txt index 59581760a0..ab31f20a62 100644 --- a/_pages/it_IT/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/it_IT/Homebrew-Launcher-(Soundhax).txt @@ -26,7 +26,9 @@ SoundHax è compatibile con le versioni del software comprese tra 9.0.0 e 11.2.0 6. Scorri tutti i consigli proposti, chiudi l'applicazione normalmente, poi riaprila + Lanciare in questo momento SoundHax farebbe riapparire i consigli al successivo avvio di Sound Nintendo 3DS finché non viene seguita questa procedura 7. Riproduci il file `.m4a` di SoundHax -8. La console dovrebbe ora avviare l'homebrew launcher + + Potrebbero essere necessari più tentativi + + Se la console dovesse bloccarsi, forzane lo spegnimento tenendo premuto il pulsante di accensione, quindi riprova +8. La console dovrebbe ora avviare l'Homebrew Launcher Prosegui con [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/it_IT/Installing-arm9loaderhax.txt b/_pages/it_IT/Installing-arm9loaderhax.txt index a85a7580e2..51aeb4b25f 100644 --- a/_pages/it_IT/Installing-arm9loaderhax.txt +++ b/_pages/it_IT/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ In questa sezione daremo uno scopo ai passaggi fatti in precedenza: installeremo Questo tipo di exploit è quasi il migliore che possa esistere in quanto è permanentemente installabile nelle partizioni firm della NAND e viene lanciato prima del completamento del normale avvio dell'OS permettendo non solo di funzionare su *tutte* le versioni di sistema una volta installato, ma è in grado di ripristinare la console da brick normalmente irrecuperabili in un 3DS non-A9LH, quali un menu HOME non funzionante o un'installazione di un titolo corrotto. -Il file `arm9loaderhax.bin` viene lanciato dall'arm9loaderhax stesso al termine del caricamento dalla NAND, e può essere un qualunque payload arm9 valido. Questo file può essere sostituito in qualunque momento, tuttavia Luma3DS permette il lancio di diversi payload arm9 con la pressione di determinati tasti durante l'avvio della console. +Il file `arm9loaderhax.bin` viene lanciato dall'arm9loaderhax stesso al termine del caricamento dalla NAND, e può essere un qualunque payload arm9 valido. Questo file può essere sostituito in qualunque momento, tuttavia Luma3DS permette il lancio di diversi payload arm9 grazie al chainload di Luma3DS. In questo caso, useremo Luma3DS di [AuroraWright](https://github.com/AuroraWright/) per avviare direttamente una SysNAND patchata, bypassando del tutto il bisogno di una EmuNAND. Questo semplifica l'uso di un 3DS così modificato, e permette di risparmiare spazio sulla scheda SD. @@ -30,9 +30,9 @@ Al termine dell'installazione dell'arm9loaderhax e della configurazione di Luma3 Durante la guida verranno anche configurate le seguenti applicazioni: -+ **FBI** *(installa i giochi e le applicazioni in formato CIA)* -+ **Luma3DS Updater** *(aggiorna facilmente il CFW)* -+ **Hourglass9** *(applicazione multifunzione per gestire NAND e schede di gioco)* ++ **FBI** *(installa i giochi e le applicazioni in formato CIA)* ++ **Luma3DS Updater** *(aggiorna facilmente il CFW)* ++ **Hourglass9** *(applicazione multifunzione per gestire NAND e schede di gioco)* #### Cosa serve @@ -47,7 +47,6 @@ Durante la guida verranno anche configurate le seguenti applicazioni: * L'ultima versione di [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) * L'ultima versione di [DspDump](https://github.com/Cruel/DspDump/releases/latest) * L'ultima versione di [FBI](https://github.com/Steveice10/FBI/releases/latest) -* L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * L'[Homebrew Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) #### Istruzioni @@ -66,22 +65,16 @@ Durante la guida verranno anche configurate le seguenti applicazioni: 1. **Se presente, copia la cartella `/files9/` dalla tua scheda SD in una posizione sicura sul tuo computer e in ulteriori locazioni (come un archivio online); i file al suo interno potrebbero salvarti dalla perdita di tutti i tuoi dati nel caso qualcosa vada storto** 2. Se assente, crea una cartella chiamata `cias` nella root della tua scheda SD -3. **Se presente, elimina la cartella `a9lh` dalla root della tua scheda SD** - + **Se dovessi accidentalmente installare l'arm9loaderhax utilizzando il file `otp.bin` di un'altra console, BRICKERAI IL TUO 3DS!** -4. Se presente, elimina la cartella `3ds` dalla root della tua scheda SD -5. **Copia il _contenuto_ della cartella `starter` dell'archivio `starter.zip` nella root della tua scheda SD** - + Include una cartella chiamata `3ds` che rimpiazzerà quella appena eliminata 6. Copia _il contenuto_ dell'archivio`.7z` del SafeA9LHInstaller nella root della tua scheda SD -7. **Copia la cartella `a9lh` presente nell'archivio`.zip` di data_input nella root della tua scheda SD** -8. **Copia _il contenuto_ dell'archivio`.7z` della release di arm9loaderhax nella cartella `a9lh` nella tua scheda SD** +7. Copia la cartella `a9lh` presente nell'archivio `.zip` di data_input nella root della tua scheda SD +8. Copia _il contenuto_ dell'archivio `.7z` della release di arm9loaderhax nella cartella `a9lh` nella tua scheda SD 9. Copia il file `hblauncher_loader.cia` dall'archivio`.zip`di hblauncher_loader nella cartella `/cias/` della tua scheda SD 10. Copia il file `lumaupdater.cia` dall'archivio`.zip` di Luma3DS Updater nella cartella `/cias/` della tua scheda SD 11. Copia il file `FBI.cia` dall'archivio`.zip` di FBI nella cartella `/cias/` della tua scheda SD -12. **Copia il file `arm9loaderhax.bin` dall'archivio `.7z` di Luma3DS nella root della tua scheda SD, sovrascrivendo eventuali file preesistenti** +12. Copia il file `arm9loaderhax.bin` dall'archivio`.7z` di Luma3DS nella root della tua scheda SD, sovrascrivendo eventuali file preesistenti 13. Crea una cartella chiamata `luma` nella root della tua scheda SD 14. Crea una cartella chiamata `payloads` nella cartella `luma` della tua scheda SD 15. Copia il file `Hourglass9.bin` dall'archivio `.zip` di Hourglass9 nella cartella `/luma/payloads/` presente nella tua scheda SD e rinomina il file `Hourglass9.bin` in `start_Hourglass9.bin` -16. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` presente nella scheda SD e rinomina il file `GodMode9.bin` in`up_GodMode9.bin` 17. Copia il file `aeskeydb.bin` nella cartella `/files9/` della tua scheda SD 18. Copia il file `DspDump.3dsx` nella cartella `/3ds/` della tua scheda SD 19. Copia _il contenuto_ dell'archivio`fbi-2.4.2-injectable.zip` nella cartella `/files9/` della tua scheda SD @@ -91,11 +84,11 @@ Durante la guida verranno anche configurate le seguenti applicazioni: 1. Reinserisci la scheda SD nel 3DS 2. Esegui i seguenti passaggi per installare l'arm9loaderhax sulla tua console: + Dovresti ora essere alla versione del software di sistema 2.1.0 - + Go to `http://2xrsa.3ds.guide` on your 3DS + + Vai alla pagina `http://2xrsa.3ds.guide` utilizzando il Browser Internet del tuo 3DS + Se ottieni l'errore "Questo servizio non è disponibile nella tua regione", usa le Impostazioni della console per configurare la nazione in modo che corrisponda alla regione della NAND installata durante il ctrtransfer 2.1.0 + Se ottieni un errore diverso, [segui questa guida per risolvere il problema](troubleshooting#ts_browser) + Se ottieni una schermata visivamente corrotta, [segui questa guida per risolvere il problema](troubleshooting#ts_safe_a9lh_screen) - + In caso la comunicazione wireless dovesse essere inattiva, puoi riattivarla scollegando il 3DS dall'alimentazione e rimuovendo la batteria per alcuni secondi + + Se hai un 2DS o su un New 3DS e hai lasciato inattiva la comunicazione wireless, puoi riattivarla rimuovendo l'alimentatore e la batteria per alcuni secondi prima di accendere la console + Premi (Select) per selezionare Full Install + Il programma di installazione installerà l'arm9loaderhax sulla tua console (impiegherà pochi istanti) + Spegni la console premendo un pulsante qualsiasi @@ -103,7 +96,7 @@ Durante la guida verranno anche configurate le seguenti applicazioni: ##### Sezione III - Configurare Luma3DS -1. Tieni premuto (Select) durante l'accensione per entrare nel menu di Luma3DS +1. Avvia la tua console tenendo premuto (Select) per aprire il menu delle opzioni di Luma3DS + Assicurati di tener premuto il pulsante prima di premere il pulsante di accensione + Se ottieni una schermata nera, [segui questa guida per risolvere il problema](troubleshooting#ts_sys_a9lh) + Se si avvia SafeA9LHInstaller, [segui questa guida per risolvere il problema](troubleshooting#ts_safe_a9lh) @@ -111,7 +104,7 @@ Durante la guida verranno anche configurate le seguenti applicazioni: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. Se stai utilizzando un **New 3DS**, dovresti selezionare *anche*: +3. Se stai utilizzando un **New 3DS**, puoi selezionare *anche*: + **"New 3DS CPU" su "Clock+L2(x)"** + Questa opzione aumenterà il framerate in molti giochi, ma può rendere instabili altri + Se alcuni giochi non dovessero più funzionare correttamente, disabilita questa opzione @@ -124,7 +117,7 @@ Durante la guida verranno anche configurate le seguenti applicazioni: Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e vorresti ripristinare il contenuto dell'EmuNAND nella tua nuova SysNAND con CFW, segui la guida [Spostare l'EmuNAND](move-emunand) al posto di seguire i primi quattro passi indicati in questa sezione. {: .notice--info} -1. Avvia Hourglass9 dall'arm9loaderhax tenendo premuto (Start) all'avvio +1. Avvia la tua console tenendo premuto (Start) per lanciare Hourglass9 2. Seleziona "SysNAND Backup/Restore" 3. Seleziona "SysNAND Restore (keep a9lh) e ripristina il file `NANDmin.bin` 4. Premi (Start) per riavviare la console @@ -134,16 +127,15 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e + Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copia i file `firmware.bin` e `cetk` nella cartella `/luma/` della tua scheda SD + Elimina entrambi i file dopo aver aggiornato il tuo 3DS -2. Aggiorna il tuo 3DS andando su Impostazioni della console, poi "Impostazioni generali", infine scorri a destra e seleziona "Aggiornamento" +6. Aggiorna il tuo 3DS andando su Impostazioni della console, poi "Impostazioni generali", infine scorri a destra e seleziona "Aggiornamento" + Gli aggiornamenti effettuati usando A9LH + Luma (ora installato) sono sicuri, per cui basta chiederne la conferma + L'avviso di non aggiornare un New 3DS con versione 2.1.0 non è più applicabile dopo aver ripristinato il tuo backup della NAND. + Se ottieni un errore, imposta i DNS della connessione di rete in modo che vengano ottenuti automaticamente + Se continui ad ottenere un errore e la tua NAND è ad una versione precedente di 9.2.0, [segui la guida per il ctrtransfer 9.2.0](9.2.0-ctrtransfer) - ##### Sezione V - Injecting di FBI -1. Avvia Hourglass9 dall'arm9loaderhax tenendo premuto (Start) all'avvio +1. Avvia la tua console tenendo premuto (Start) per lanciare Hourglass9 2. Seleziona "SysNAND Options", quindi l'opzione "Health&Safety Dump" per effettuare un dump di "Informazioni per la salute e la sicurezza" nel file `hs.app` **(puoi usare (Su) e (Giù) / (Sinistra) e (Destra) per cambiare il nome)** 3. Premi (B), quindi seleziona l'opzione "Health&Safety Inject" 4. Seleziona il file `.app` di FBI injectable in base alla regione della tua console @@ -169,19 +161,19 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e 14. Avvia l'Homebrew Launcher dal menu HOME 15. Seleziona "DSP Dump" 16. Premi (Start) per uscire quando richiesto -17. Riavvia la console tenendo premuto (Start) per avviare Hourglass9 -18. Seleziona "SysNAND Backup/Restore", poi seleziona "Health&Safety Inject" -19. Seleziona `hs.app` (il file originale, che non contiene FBI), poi premi (A) per confermare la sostituzione -20. Premi (Select) nel menu principale per rimuovere la scheda SD -21. Rimuovi la scheda SD, quindi premi (Start) per riavviare la console +17. Avvia la tua console tenendo premuto (Start) per lanciare Hourglass9 +19. Seleziona "SysNAND Backup/Restore", poi seleziona "Health&Safety Inject" +20. Seleziona `hs.app` (il file originale, che non contiene FBI), poi premi (A) per confermare la sostituzione +21. Premi (Select) nel menu principale per rimuovere la scheda SD +22. Rimuovi la scheda SD, quindi premi (Start) per riavviare la console + Il riavvio della console con la scheda SD rimossa permette la configurazione dell'installazione CTRNAND di Luma3DS -22. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: +23. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: + **"Show NAND or user string in System Settings"** -23. Se stai utilizzando un **New 3DS**, dovresti selezionare *anche*: +24. Se stai utilizzando un **New 3DS**, puoi selezionare *anche*: + **"New 3DS CPU" su "Clock+L2(x)"** + Questa opzione aumenterà il framerate in molti giochi, ma può rendere instabili altri + Se alcuni giochi non dovessero più funzionare correttamente, disabilita questa opzione -24. Reinserisci la scheda SD, quindi premi (Start) per salvare e riavviare la console! +25. Reinserisci la scheda SD, quindi premi (Start) per salvare e riavviare la console! ___ @@ -199,7 +191,7 @@ Visto che aggiorna solo i file di Luma3DS presenti sulla scheda SD, se avvii la {% capture notice-6 %} D'ora in poi verrà avviata di default una SysNAND basata su Custom Firmware. Puoi tenere premuto (Select) all'accensione della console per aprire il menu di Luma3DS. -Puoi tenere premuto (Start) all'accensione della console per aprire Hourglass9, un'applicazione multifunzione compatibile con arm9loaderhax per gestire NAND e schede di gioco. +Puoi tenere premuto (Start) all'accensione della console per avviare Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/it_IT/Region-Changing.txt b/_pages/it_IT/Region-Changing.txt index 85afd61d80..09a152acb5 100644 --- a/_pages/it_IT/Region-Changing.txt +++ b/_pages/it_IT/Region-Changing.txt @@ -40,11 +40,12 @@ Il cambio regione tramite ctrtransfer (effettuato in questa guida) sembra far sm #### Istruzioni -**Alcune console hanno un file `SecureInfo_B` al posto di `SecureInfo_A`; non è un problema e basta utilizzare il file `SecureInfo_B` nei passi che lo richiedono.** +**Alcune console hanno un file `SecureInfo_B` al posto di `SecureInfo_A`; non è un problema e basta utilizzare il file `SecureInfo_B` nei passi che lo richiedono.** +{: .notice--info} ##### Sezione I - Preparazione -1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` presente nella scheda SD e rinomina il file `GodMode9.bin` appena copiato in `up_GodMode9.bin` +1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` della tua scheda SD 2. Copia il file `Decrypt9WIP.bin` nella cartella `/luma/payloads/` della tua scheda SD e rinomina il file `Decrypt9WIP.bin` in `x_Decrypt9WIP.bin` 3. Copia i file del ctrtransfer 9.2.0 con estensione `.bin` e `.bin.sha` dall'archivio `.zip` ctrtransfer alla cartella `/files9/` presente nella scheda SD 4. Reinserisci la scheda SD nel 3DS @@ -52,12 +53,13 @@ Il cambio regione tramite ctrtransfer (effettuato in questa guida) sembra far sm ##### Sezione II - Backup dei ticket e della configurazione di sistema 1. Premi il pulsante (Start) mentre tieni premuto il pulsante (X) per riavviare la console in Decrypt9 tramite arm9loaderhax -2. Seleziona "Ticket/Titlekey Options", quindi seleziona "Ticket Dump (SysNAND)" -3. Premi (Select) per rimuovere la scheda SD, poi inseriscila nel tuo computer -4. Elimina tutti i file con estensione `.tik` presenti nella cartella `/files9/` che **NON** cominciano con "00-" -5. Lascia stare tutti i file con estensione `.tik` che cominciano con "00-" presenti nella cartella -6. Reinserisci la scheda SD nel tuo 3DS, quindi premi (B) per tornare al menu principale -7. Seleziona "SysNAND Options", quindi "System Save Dump", e infine "Dump configsave.bin" +2. Seleziona Decrypt9WIP, quindi premi (A) per avviarlo +3. Seleziona "Ticket/Titlekey Options", quindi seleziona "Ticket Dump (SysNAND)" +4. Premi (Select) per rimuovere la scheda SD, poi inseriscila nel tuo computer +5. Elimina tutti i file con estensione `.tik` presenti nella cartella `/files9/` che **NON** cominciano con "00-" +6. Lascia stare tutti i file con estensione `.tik` che cominciano con "00-" presenti nella cartella +7. Reinserisci la scheda SD nel tuo 3DS, quindi premi (B) per tornare al menu principale +8. Seleziona "SysNAND Options", quindi "System Save Dump", e infine "Dump configsave.bin" ##### Sezione III - ctrtransfer @@ -75,7 +77,7 @@ Il cambio regione tramite ctrtransfer (effettuato in questa guida) sembra far sm ##### Sezione IV - Modifica di SecureInfo -1. Premi il pulsante (Start) mentre tieni premuto il pulsante (Su) per riavviare la console in Decrypt9 tramite arm9loaderhax +1. Premi il pulsante (Start) mentre tieni premuto il pulsante (Su) per riavviare la console in Decrypt9 tramite arm9loaderhax 2. Cerca la cartella `SYSNAND CTRNAND` -> `rw` -> `sys` 3. Posizionati su `SecureInfo_A`, quindi premi (Y) per copiarlo 4. Premi il pulsante (Y) per incollare una copia di `SecureInfo_A` @@ -119,7 +121,8 @@ Il cambio regione tramite ctrtransfer (effettuato in questa guida) sembra far sm ##### Sezione VII - Ripristino della configurazione di sistema -1. Avvia Decrypt9 dall'arm9loaderhax tenendo premuto (X) all'avvio +1. Premi il pulsante (Start) mentre tieni premuto il pulsante (X) per riavviare la console in Decrypt9 tramite arm9loaderhax +2. Seleziona Decrypt9WIP, quindi premi (A) per avviarlo 2. Seleziona "SysNAND Options", quindi "System Save Inject", ed infine "Inject configsave.bin" Le console Old 3DS / 2DS potrebbero dover essere formattate (tramite TinyFormat o con le Impostazioni della console) per poter utilizzare la modalità memoria estesa (con ad esempio Monster Hunter, Super Smash Bros o Pokémon Sole/Luna). diff --git a/_pages/it_IT/Updating-A9LH.txt b/_pages/it_IT/Updating-A9LH.txt index 7f284f3fbc..89652f704d 100644 --- a/_pages/it_IT/Updating-A9LH.txt +++ b/_pages/it_IT/Updating-A9LH.txt @@ -27,7 +27,7 @@ Questa procedura aggiornerà anche i vari payload e il database delle chiavi AES #### Cosa serve * [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * L'ultima versione di [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(il file`.7z`)* * L'ultima versione di [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(il file `.7z`)* * L'ultima versione di [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) @@ -44,18 +44,18 @@ Questa procedura aggiornerà anche i vari payload e il database delle chiavi AES 4. Copia il file `Hourglass9.bin` dall'archivio `.zip` di Hourglass9 nella cartella `/luma/payloads/` presente nella tua scheda SD e rinomina il file `Hourglass9.bin` in `start_Hourglass9.bin` 5. Copia il file `arm9loaderhax.bin` dall'archivio `.zip` di SafeA9LHInstaller nella cartella `/luma/payloads/` della tua scheda SD 6. Rinomina il file `arm9loaderhax.bin` presente in `/luma/payloads/` in `down_safea9lhinstaller.bin` -7. Copia la cartella `a9lh` dall'archivio `data_input_v4.zip` nella root della tua scheda SD +7. Copia la cartella `a9lh` presente nell'archivio `.zip` di data_input nella root della tua scheda SD 8. Copia _il contenuto_ dell'archivio`.7z` dell'arm9loaderhax nella cartella `a9lh` della tua scheda SD 9. Copia il file `arm9loaderhax.bin` dall'archivio`.zip` di Luma3DS nella root della tua scheda SD, sovrascrivendo eventuali file preesistenti 10. Reinserisci la scheda SD nel 3DS ##### Sezione II - Aggiornamento dei payload -1. Accendi la console tenendo premuto (Giù) +1. Reinserisci la scheda SD nel 3DS e avvia la console tenendo premuto (Select) 2. Premi (Select) per aggiornare l'arm9loaderhax 3. Spegni la console e inserisci la scheda SD nel tuo computer 4. Elimina la cartella `a9lh` dalla root della tua scheda SD -5. Cancella il file `down_safea9lhinstaller.bin` dalla cartella `/luma/payloads/` +5. Elimina il file `safea9lhinstaller.bin` dalla cartella `/luma/payloads/` ##### Sezione III - Configurare Luma3DS diff --git a/_pages/ja_JP/2.1.0-ctrtransfer.txt b/_pages/ja_JP/2.1.0-ctrtransfer.txt index 094d8fe4ca..8efefa26e1 100644 --- a/_pages/ja_JP/2.1.0-ctrtransfer.txt +++ b/_pages/ja_JP/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /2.1.0-ctrtransfer.html If you downgrade to 2.1.0 on a 2DS or New 3DS and left Wireless Communication off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up. {: .notice--info} -If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0, make sure to have a microSD card reader on hand before proceeding. +If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. {: .notice--info} Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide. diff --git a/_pages/ja_JP/Decrypt9-(Homebrew-Launcher).txt b/_pages/ja_JP/Decrypt9-(Homebrew-Launcher).txt index 83b8fbeb6e..0a396fe5a6 100644 --- a/_pages/ja_JP/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ja_JP/Decrypt9-(Homebrew-Launcher).txt @@ -12,16 +12,18 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the homebrew launcher -7. Launch fasthax -8. Once it has completed, press (Start) to exit back to the homebrew launcher +1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS +7. Launch fasthax from the list of homebrew + + You may have to scroll down to see this option +8. Once it has completed, press (Start) to exit back to the Homebrew Launcher + This may take several tries -9. Launch safehax +9. Launch safehax from the list of homebrew + + You may have to scroll down to see this option 10. If the exploit was successful, you will have booted into Decrypt9 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) diff --git a/_pages/ja_JP/Hardmod-Downgrade.txt b/_pages/ja_JP/Hardmod-Downgrade.txt index 4d91fbfbda..b954882031 100644 --- a/_pages/ja_JP/Hardmod-Downgrade.txt +++ b/_pages/ja_JP/Hardmod-Downgrade.txt @@ -45,7 +45,7 @@ This will work on New 3DS, Old 3DS, and 2DS. 1. Copy and merge the `3ds` folder from the 3DSident `.zip` to your device's SD card 2. Reinsert your SD card into your 3DS -3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the homebrew launcher on the device +3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the Homebrew Launcher on the device 4. Launch 3DSident 5. Verify that the following: + **Kernel version**: 2.50-11 diff --git a/_pages/ja_JP/Homebrew-Launcher-(Soundhax).txt b/_pages/ja_JP/Homebrew-Launcher-(Soundhax).txt index ce7cbdb3f1..b092e11eab 100644 --- a/_pages/ja_JP/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/ja_JP/Homebrew-Launcher-(Soundhax).txt @@ -26,7 +26,9 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, 6. Go through all of the bird tips, then close the app normally and reopen it + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 7. Play the SoundHax `.m4a` -8. Your console should load the homebrew menu + + This may take several tries + + If it freezes, just force the console to power off by holding the power button, then try again +8. Your console should load the Homebrew Launcher Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ja_JP/Installing-arm9loaderhax.txt b/_pages/ja_JP/Installing-arm9loaderhax.txt index a7ba223d86..a1323ccb66 100644 --- a/_pages/ja_JP/Installing-arm9loaderhax.txt +++ b/_pages/ja_JP/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ In this section, we will go through the process that all the other steps have le This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install. -The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads by holding buttons on boot. +The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. @@ -31,7 +31,7 @@ Once arm9loaderhax is installed and Luma3DS is setup with the correct options, w During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* -+ **Luma3DS Updater** *(updates our CFW installation easily)* ++ **Luma3DS Updater** *(updates your CFW installation easily)* + **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)* #### What you need @@ -47,7 +47,6 @@ During this process, we also setup programs such as the following: * The latest release of [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) * The latest release of [DspDump](https://github.com/Cruel/DspDump/releases/latest) * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) #### Instructions @@ -66,22 +65,16 @@ During this process, we also setup programs such as the following: 1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system** 2. Create a folder named `cias` on the root of your SD card if it does not already exist -3. **Delete the `a9lh` folder from the root of your SD card if it exists** - + **If you accidentally install arm9loaderhax using another device's `otp.bin`, you will BRICK!** -4. Delete the `3ds` folder from the root of your SD card if it exists -5. **Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card** - + This will include a brand new `3ds` folder to replace the one you just deleted 6. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card -7. **Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card** -8. **Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card** +7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card +8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card 9. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card 10. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card 11. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card -12. **Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files** +12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files 13. Create a folder named `luma` on the root of your SD card 14. Create a folder named `payloads` in the `luma` folder on your SD card 15. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` -16. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` to `up_GodMode9.bin` 17. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card 18. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card 19. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card @@ -95,7 +88,7 @@ During this process, we also setup programs such as the following: + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser) + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen) - + If your wifi switch is off, unplug the 3DS and remove the battery for several seconds to enable wifi + + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + Press (Select) to Full Install + The installer will now install arm9loaderhax on your device (this is very fast) + Shut down your console by pressing any button @@ -103,7 +96,7 @@ During this process, we also setup programs such as the following: ##### Section III - Configuring Luma3DS -1. Hold (Select) on boot to enter the Luma3DS menu +1. Boot your device while holding (Select) to enter the Luma3DS configuration menu + Make sure to start holding the button before pressing power + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_a9lh) + If you boot to SafeA9LHInstaller, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh) @@ -111,7 +104,7 @@ During this process, we also setup programs such as the following: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you should *also* enable the following: +3. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again @@ -124,7 +117,7 @@ During this process, we also setup programs such as the following: If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section. {: .notice--info} -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore" 3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` 4. Press (Start) to reboot @@ -134,16 +127,15 @@ If, before following this guide, you already had an EmuNAND setup and would like + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -2. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) - ##### Section V - Injecting FBI -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** 3. Press (B), then select the "Health&Safety Inject" option 4. Select the FBI injectable `.app` for your region @@ -169,19 +161,19 @@ If, before following this guide, you already had an EmuNAND setup and would like 14. Launch the Homebrew Launcher from the home menu 15. Select "DSP Dump" 16. Press (Start) when prompted to exit -17. Reboot while holding (Start) to launch Hourglass9 -18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -20. Press (Select) on the main menu to eject your SD card -21. Press (Start) to reboot with the SD card removed +17. Boot your device while holding (Start) to enter Hourglass9 +19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +21. Press (Select) on the main menu to eject your SD card +22. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation -22. Use the (A) button and the D-Pad to turn on the following: +23. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -23. If you are using a **New 3DS**, you should *also* enable the following: +24. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -24. Reinsert your SD card, then press (Start) to save and reboot! +25. Reinsert your SD card, then press (Start) to save and reboot! ___ @@ -191,7 +183,7 @@ If DSi / DS functionality has broken (such as DS carts or DSiWare no longer work {% capture notice-10 %} You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. -This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use whatever version you placed in CTR NAND. +This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use the version you placed in CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
@@ -199,7 +191,7 @@ This will only update the Luma3DS files on the SD Card. If you boot the device w {% capture notice-6 %} You will now boot a Custom Firmware based SysNAND by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. -You can now hold (Start) on boot to launch Hourglass9, an arm9loaderhax safe multipurpose NAND and cartridge tool. +You can now hold (Start) on boot to launch Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ja_JP/Region-Changing.txt b/_pages/ja_JP/Region-Changing.txt index 7097015a28..3fe40b9841 100644 --- a/_pages/ja_JP/Region-Changing.txt +++ b/_pages/ja_JP/Region-Changing.txt @@ -40,11 +40,12 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot #### Instructions -**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +{: .notice--info} ##### Section I - Prep work -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` +1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 2. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin` 3. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card 4. Reinsert your SD card into your 3DS @@ -52,12 +53,13 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section II - Backup tickets and config save 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 -2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" -3. Press (Select) to eject your SD card, then put it in your computer -4. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" -5. Leave all the `.tik` files that do start with "00-" in the folder -6. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu -7. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" +2. Hover over Decrypt9WIP, then press (A) to launch it +3. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" +4. Press (Select) to eject your SD card, then put it in your computer +5. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" +6. Leave all the `.tik` files that do start with "00-" in the folder +7. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu +8. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" ##### Section III - ctrtransfer @@ -75,7 +77,7 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section IV - Editing SecureInfo -1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 +1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 2. Navigate to `SYSNAND CTRNAND` -> `rw` -> `sys` 3. Press (Y) on `SecureInfo_A` to copy it 4. Press (Y) to paste a copy of `SecureInfo_A` @@ -119,7 +121,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section VII - Restore config save -1. Reboot holding (X) during boot to launch arm9loaderhax Decrypt9 +1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 +2. Hover over Decrypt9WIP, then press (A) to launch it 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). diff --git a/_pages/ja_JP/Site-Navigation.txt b/_pages/ja_JP/Site-Navigation.txt index f18f1900da..110e6d3705 100644 --- a/_pages/ja_JP/Site-Navigation.txt +++ b/_pages/ja_JP/Site-Navigation.txt @@ -7,20 +7,18 @@ sitemap: false --- {% capture notice-1 %} - **Popular** + + [Installing arm9loaderhax](installing-arm9loaderhax) + [NFIRM Downgrade](nfirm-downgrade) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) + [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) - {% endcapture %} -
{{ notice-1 | markdownify }}
{% capture notice-2 %} - **All** + + [2.1.0 ctrtransfer](2.1.0-ctrtransfer) + [9.2.0 ctrtransfer](9.2.0-ctrtransfer) + [Cart Update](cart-update) @@ -48,7 +46,5 @@ sitemap: false + [Troubleshooting](troubleshooting) + [Updating A9LH](updating-a9lh) + [Why Ads?](why-ads) - {% endcapture %} -
{{ notice-2 | markdownify }}
\ No newline at end of file diff --git a/_pages/ja_JP/Updating-A9LH.txt b/_pages/ja_JP/Updating-A9LH.txt index 2e9499fc3c..430678e379 100644 --- a/_pages/ja_JP/Updating-A9LH.txt +++ b/_pages/ja_JP/Updating-A9LH.txt @@ -27,7 +27,7 @@ These steps will also update your various payloads and the AES key database. #### What you need * [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * The latest release of [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(the `.7z` file)* * The latest release of [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(the `.7z` file)* * The latest release of [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) @@ -44,18 +44,18 @@ These steps will also update your various payloads and the AES key database. 4. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` 5. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card 6. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin` -7. Copy the `a9lh` folder from `data_input_v4.zip` to the root of your SD Card +7. Copy the `a9lh` folder from data_input `.zip` to the root of your SD Card 8. Copy _the contents of_ the arm9loaderhax `.7z` to `a9lh` folder on your SD card 9. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card, overwrite existing files 10. Reinsert your SD card into your 3DS ##### Section II - Payload update -1. Boot the device while holding D-Pad down +1. Reinsert your SD card into your 3DS and boot holding (Select) 2. Press (Select) to update arm9loaderhax 3. Power off the device and put your SD card back in your computer 4. Delete the `a9lh` folder from the root of your SD card -5. Delete `down_safea9lhinstaller.bin` from `/luma/payloads/` +5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` ##### Section III - Configuring Luma3DS diff --git a/_pages/ko_KR/2.1.0-ctrtransfer.txt b/_pages/ko_KR/2.1.0-ctrtransfer.txt index a128198b68..07c4382d34 100644 --- a/_pages/ko_KR/2.1.0-ctrtransfer.txt +++ b/_pages/ko_KR/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /2.1.0-ctrtransfer.html 2DS 또는 뉴 3DS에서 무선 인터넷 연결을 끈 채 2.1.0 버전으로 다운그레이드했다면, 충전기와 배터리를 제거하고 몇 초 후 다시 장착하여 무선 인터넷 연결을 다시 켤 수 있습니다. {: .notice--info} -SD 카드의 파일을 옮기는 데에 뉴 3DS의 microSD Management 기능을 사용하고 있었다면, 그 방법은 2.1.0 버전에서 쓸 수 없습니다. 작업을 진행하기 전에 microSD 카드 리더를 준비하십시오. +If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. {: .notice--info} Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. 티켓은 이 가이드의 마지막 부분에서 복원됩니다. @@ -76,26 +76,26 @@ You should be in Decrypt9 for these steps. 7. Delete the 2.1.0 ctrtransfer image `.bin` and `.bin.sha` from the `/files9/` folder on your SD card 8. Press (Start) to reboot without reinserting your SD card + While on 2.1.0, the device will black screen on boot if your SD card is inserted before the home menu loads - + 2.1.0 버전에서는 기기가 다시 시작될 때마다 부팅 전에 SD 카드를 빼내고 홈 메뉴가 로드된 이후 다시 삽입해야 합니다. - + 일단은 다음 페이지에서 파일을 복사하기 위해 SD 카드를 빼둔 채로 진행하십시오. - + 이 증상은 다음 페이지에서 기기를 복원하면 사라집니다. + + Every time the device is rebooted on 2.1.0, you will need to take out your SD card before boot and put it back in after the home menu loads + + For now, leave the SD card out as you will be copying files to it in the next page + + This will be fixed once you restore your device in the next page ___ -일부 기기에서 2.1.0 버전의 처음 부팅이 일반적인 부팅보다 약간 오래 걸릴 수 있습니다. +The initial boot of 2.1.0 can take slightly longer than a standard boot on some devices. {: .notice--info} -*(화면 깨짐이나 변색은 2.1.0 버전의 일부 기기에서 정상적인 증상이며, 백업을 복원하면 증상이 사라집니다.)* +*(Screen distortions or discolorations are normal for some devices while on 2.1.0, they will go away once you restore your backup)* {: .notice--info} {% capture notice %} -**2.1.0 버전의 뉴 3DS를 슬립 모드로 전환하면 복구가 불가능한 벽돌이 되는 것으로 알려져 있습니다!** -**이는 기기가 켜져 있을 때 위쪽 화면을 덮으면 나타나는 증상이며, 기기를 끄는 것으로는 벽돌이 되지 않습니다.** -**기기는 위쪽 화면이 덮히면 슬립 모드로 전환됩니다. 타이머 같은 걸 사용하는 것이 아닙니다.** -**이러한 일이 일어날 가능성을 없애기 위해 작업을 지체 없이 진행하십시오!** +**Putting a New 3DS on 2.1.0 in sleep mode is known to cause an UNRECOVERABLE brick!** +**This only happens when shutting the lid _while the device is on_; this does not apply to turning the device off.** +**The device only enters sleep mode when the lid is closed. It is not on a timer or anything like that.** +**You should continue without delay to avoid any possibility of this happening!** {% endcapture %}
{{ notice | markdownify }}
-[arm9loaderhax 설치](installing-arm9loaderhax)로 이어집니다. +Continue to [Installing arm9loaderhax](installing-arm9loaderhax) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ko_KR/Decrypt9-(Homebrew-Launcher).txt b/_pages/ko_KR/Decrypt9-(Homebrew-Launcher).txt index 83b8fbeb6e..0a396fe5a6 100644 --- a/_pages/ko_KR/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ko_KR/Decrypt9-(Homebrew-Launcher).txt @@ -12,16 +12,18 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the homebrew launcher -7. Launch fasthax -8. Once it has completed, press (Start) to exit back to the homebrew launcher +1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS +7. Launch fasthax from the list of homebrew + + You may have to scroll down to see this option +8. Once it has completed, press (Start) to exit back to the Homebrew Launcher + This may take several tries -9. Launch safehax +9. Launch safehax from the list of homebrew + + You may have to scroll down to see this option 10. If the exploit was successful, you will have booted into Decrypt9 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) diff --git a/_pages/ko_KR/Hardmod-Downgrade.txt b/_pages/ko_KR/Hardmod-Downgrade.txt index 4d91fbfbda..b954882031 100644 --- a/_pages/ko_KR/Hardmod-Downgrade.txt +++ b/_pages/ko_KR/Hardmod-Downgrade.txt @@ -45,7 +45,7 @@ This will work on New 3DS, Old 3DS, and 2DS. 1. Copy and merge the `3ds` folder from the 3DSident `.zip` to your device's SD card 2. Reinsert your SD card into your 3DS -3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the homebrew launcher on the device +3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the Homebrew Launcher on the device 4. Launch 3DSident 5. Verify that the following: + **Kernel version**: 2.50-11 diff --git a/_pages/ko_KR/Homebrew-Launcher-(Soundhax).txt b/_pages/ko_KR/Homebrew-Launcher-(Soundhax).txt index ce7cbdb3f1..b092e11eab 100644 --- a/_pages/ko_KR/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/ko_KR/Homebrew-Launcher-(Soundhax).txt @@ -26,7 +26,9 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, 6. Go through all of the bird tips, then close the app normally and reopen it + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 7. Play the SoundHax `.m4a` -8. Your console should load the homebrew menu + + This may take several tries + + If it freezes, just force the console to power off by holding the power button, then try again +8. Your console should load the Homebrew Launcher Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ko_KR/Installing-arm9loaderhax.txt b/_pages/ko_KR/Installing-arm9loaderhax.txt index a7ba223d86..7a6454a3cf 100644 --- a/_pages/ko_KR/Installing-arm9loaderhax.txt +++ b/_pages/ko_KR/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ In this section, we will go through the process that all the other steps have le This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install. -The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads by holding buttons on boot. +The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. @@ -31,7 +31,7 @@ Once arm9loaderhax is installed and Luma3DS is setup with the correct options, w During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* -+ **Luma3DS Updater** *(updates our CFW installation easily)* ++ **Luma3DS Updater** *(updates your CFW installation easily)* + **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)* #### What you need @@ -47,7 +47,6 @@ During this process, we also setup programs such as the following: * The latest release of [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) * The latest release of [DspDump](https://github.com/Cruel/DspDump/releases/latest) * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) #### Instructions @@ -66,22 +65,16 @@ During this process, we also setup programs such as the following: 1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system** 2. Create a folder named `cias` on the root of your SD card if it does not already exist -3. **Delete the `a9lh` folder from the root of your SD card if it exists** - + **If you accidentally install arm9loaderhax using another device's `otp.bin`, you will BRICK!** -4. Delete the `3ds` folder from the root of your SD card if it exists -5. **Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card** - + This will include a brand new `3ds` folder to replace the one you just deleted 6. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card -7. **Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card** -8. **Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card** +7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card +8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card 9. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card 10. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card 11. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card -12. **Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files** +12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files 13. Create a folder named `luma` on the root of your SD card 14. Create a folder named `payloads` in the `luma` folder on your SD card 15. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` -16. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` to `up_GodMode9.bin` 17. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card 18. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card 19. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card @@ -95,7 +88,7 @@ During this process, we also setup programs such as the following: + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser) + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen) - + If your wifi switch is off, unplug the 3DS and remove the battery for several seconds to enable wifi + + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + Press (Select) to Full Install + The installer will now install arm9loaderhax on your device (this is very fast) + Shut down your console by pressing any button @@ -103,7 +96,7 @@ During this process, we also setup programs such as the following: ##### Section III - Configuring Luma3DS -1. Hold (Select) on boot to enter the Luma3DS menu +1. Boot your device while holding (Select) to enter the Luma3DS configuration menu + Make sure to start holding the button before pressing power + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_a9lh) + If you boot to SafeA9LHInstaller, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh) @@ -111,7 +104,7 @@ During this process, we also setup programs such as the following: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you should *also* enable the following: +3. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again @@ -124,32 +117,31 @@ During this process, we also setup programs such as the following: If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section. {: .notice--info} -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot -2. Go to "SysNAND Backup/Restore" -3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -4. Press (Start) to reboot +1. Boot your device while holding (Start) to enter Hourglass9 +3. Go to "SysNAND Backup/Restore" +4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +5. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) -5. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: +6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -2. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) - ##### Section V - Injecting FBI -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot -2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -3. Press (B), then select the "Health&Safety Inject" option -4. Select the FBI injectable `.app` for your region -5. Press (A) and confirm to inject -6. Press (Start) to reboot -7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +1. Boot your device while holding (Start) to enter Hourglass9 +3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +4. Press (B), then select the "Health&Safety Inject" option +5. Select the FBI injectable `.app` for your region +6. Press (A) and confirm to inject +7. Press (Start) to reboot +8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup @@ -169,19 +161,19 @@ If, before following this guide, you already had an EmuNAND setup and would like 14. Launch the Homebrew Launcher from the home menu 15. Select "DSP Dump" 16. Press (Start) when prompted to exit -17. Reboot while holding (Start) to launch Hourglass9 -18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -20. Press (Select) on the main menu to eject your SD card -21. Press (Start) to reboot with the SD card removed +17. Boot your device while holding (Start) to enter Hourglass9 +19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +21. Press (Select) on the main menu to eject your SD card +22. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation -22. Use the (A) button and the D-Pad to turn on the following: +23. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -23. If you are using a **New 3DS**, you should *also* enable the following: +24. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -24. Reinsert your SD card, then press (Start) to save and reboot! +25. Reinsert your SD card, then press (Start) to save and reboot! ___ @@ -191,7 +183,7 @@ If DSi / DS functionality has broken (such as DS carts or DSiWare no longer work {% capture notice-10 %} You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. -This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use whatever version you placed in CTR NAND. +This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use the version you placed in CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
@@ -199,7 +191,7 @@ This will only update the Luma3DS files on the SD Card. If you boot the device w {% capture notice-6 %} You will now boot a Custom Firmware based SysNAND by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. -You can now hold (Start) on boot to launch Hourglass9, an arm9loaderhax safe multipurpose NAND and cartridge tool. +You can now hold (Start) on boot to launch Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ko_KR/Move-EmuNAND.txt b/_pages/ko_KR/Move-EmuNAND.txt index dfb99b5e5f..a14dade755 100644 --- a/_pages/ko_KR/Move-EmuNAND.txt +++ b/_pages/ko_KR/Move-EmuNAND.txt @@ -23,30 +23,30 @@ You will LOSE your GBA VC and DSiWare saves! 1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` 2. Reinsert your SD card into your 3DS 3. Open Hourglass9 from arm9loaderhax by holding (Start) on boot -4. Go to "EmuNAND Backup/Restore", then select the "EmuNAND Backup" option to backup your EmuNAND to `NANDmin_emu.bin` -5. Press (B) to get back to the main menu -6. Go to "SysNAND Backup/Restore", then select the "SysNAND Restore (keep a9lh)" option to restore your SysNAND from `NANDmin_emu.bin` -7. Press (Select) to eject your SD card -8. Put your SD card in your computer, then copy `NANDmin_emu.bin` and `NANDmin_emu.bin.sha` from the `/files9/` folder on your SD card to a safe location +5. Go to "EmuNAND Backup/Restore", then select the "EmuNAND Backup" option to backup your EmuNAND to `NANDmin_emu.bin` +6. Press (B) to get back to the main menu +7. Go to "SysNAND Backup/Restore", then select the "SysNAND Restore (keep a9lh)" option to restore your SysNAND from `NANDmin_emu.bin` +8. Press (Select) to eject your SD card +9. Put your SD card in your computer, then copy `NANDmin_emu.bin` and `NANDmin_emu.bin.sha` from the `/files9/` folder on your SD card to a safe location + Make backups in multiple locations + This backup will save you from a brick if anything goes wrong in the future + **Your backup should match one of the sizes on [this](nand-size) page; if it does not, you should delete it and make a new one!** -9. Delete `NANDmin_emu.bin` from the `/files9/` folder on your SD card after copying it -10. **Backup every file on your SD card to a folder on your computer; all files will be deleted in the following steps** -11. Reinsert your SD card into your 3DS -12. Press (Start) to reboot while holding (Up) to open GodMode9 -13. Press the (Home) button to bring up the action menu -14. Select "SD format menu" -15. Press (A) to confirm -16. Select "No EmuNAND" -17. Select "Auto" -18. Enter the prompted button combination to confirm -19. Hold (R) and press (B) at the same time to eject your SD card -20. Put your SD card in your computer, then copy all your files back into it +10. Delete `NANDmin_emu.bin` from the `/files9/` folder on your SD card after copying it +11. **Backup every file on your SD card to a folder on your computer; all files will be deleted in the following steps** +12. Reinsert your SD card into your 3DS +13. Press (Start) to reboot while holding (Up) to open GodMode9 +14. Press the (Home) button to bring up the action menu +15. Select "SD format menu" +16. Press (A) to confirm +17. Select "No EmuNAND" +18. Select "Auto" +19. Enter the prompted button combination to confirm +20. Hold (R) and press (B) at the same time to eject your SD card +21. Put your SD card in your computer, then copy all your files back into it + Ensure you replace the `arm9loaderhax.bin` file on the SD card with the one from your backup -21. Reinsert your SD card into your 3DS -22. Press (A) to remount your SD card -23. Press (Start) to reboot! -24. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +22. Reinsert your SD card into your 3DS +23. Press (A) to remount your SD card +24. Press (Start) to reboot! +25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/ko_KR/Region-Changing.txt b/_pages/ko_KR/Region-Changing.txt index 7097015a28..3fe40b9841 100644 --- a/_pages/ko_KR/Region-Changing.txt +++ b/_pages/ko_KR/Region-Changing.txt @@ -40,11 +40,12 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot #### Instructions -**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +{: .notice--info} ##### Section I - Prep work -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` +1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 2. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin` 3. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card 4. Reinsert your SD card into your 3DS @@ -52,12 +53,13 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section II - Backup tickets and config save 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 -2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" -3. Press (Select) to eject your SD card, then put it in your computer -4. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" -5. Leave all the `.tik` files that do start with "00-" in the folder -6. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu -7. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" +2. Hover over Decrypt9WIP, then press (A) to launch it +3. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" +4. Press (Select) to eject your SD card, then put it in your computer +5. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" +6. Leave all the `.tik` files that do start with "00-" in the folder +7. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu +8. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" ##### Section III - ctrtransfer @@ -75,7 +77,7 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section IV - Editing SecureInfo -1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 +1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 2. Navigate to `SYSNAND CTRNAND` -> `rw` -> `sys` 3. Press (Y) on `SecureInfo_A` to copy it 4. Press (Y) to paste a copy of `SecureInfo_A` @@ -119,7 +121,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section VII - Restore config save -1. Reboot holding (X) during boot to launch arm9loaderhax Decrypt9 +1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 +2. Hover over Decrypt9WIP, then press (A) to launch it 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). diff --git a/_pages/ko_KR/Updating-A9LH.txt b/_pages/ko_KR/Updating-A9LH.txt index 2e9499fc3c..430678e379 100644 --- a/_pages/ko_KR/Updating-A9LH.txt +++ b/_pages/ko_KR/Updating-A9LH.txt @@ -27,7 +27,7 @@ These steps will also update your various payloads and the AES key database. #### What you need * [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * The latest release of [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(the `.7z` file)* * The latest release of [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(the `.7z` file)* * The latest release of [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) @@ -44,18 +44,18 @@ These steps will also update your various payloads and the AES key database. 4. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` 5. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card 6. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin` -7. Copy the `a9lh` folder from `data_input_v4.zip` to the root of your SD Card +7. Copy the `a9lh` folder from data_input `.zip` to the root of your SD Card 8. Copy _the contents of_ the arm9loaderhax `.7z` to `a9lh` folder on your SD card 9. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card, overwrite existing files 10. Reinsert your SD card into your 3DS ##### Section II - Payload update -1. Boot the device while holding D-Pad down +1. Reinsert your SD card into your 3DS and boot holding (Select) 2. Press (Select) to update arm9loaderhax 3. Power off the device and put your SD card back in your computer 4. Delete the `a9lh` folder from the root of your SD card -5. Delete `down_safea9lhinstaller.bin` from `/luma/payloads/` +5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` ##### Section III - Configuring Luma3DS diff --git a/_pages/ms_MY/Decrypt9-(Homebrew-Launcher).txt b/_pages/ms_MY/Decrypt9-(Homebrew-Launcher).txt index e4706f3957..49784afd6b 100644 --- a/_pages/ms_MY/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ms_MY/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Arahan 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Cipta satu folder bernama `files9` pada root kad SD anda jika ianya tidak pernah ada -2. Salin `safehax.3dsx` letakkan ke folder `/3ds/` pada kad SD anda -3. Salin `fasthax.3dsx` letakkan ke folder `/3ds/` pada kad SD anda -4. Salin `Decrypt9WIP.bin` daripada Decrypt9WIP `.zip` letakkan ke root kad SD anda dan tukar nama `Decrypt9WIP.bin` kepada `safehaxpayload.bin` -5. Pasang kembali kad SD anda ke dalam 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Cipta satu folder bernama `files9` pada root kad SD anda jika ianya tidak pernah ada +3. Salin `safehax.3dsx` letakkan ke folder `/3ds/` pada kad SD anda +4. Salin `fasthax.3dsx` letakkan ke folder `/3ds/` pada kad SD anda +5. Salin `Decrypt9WIP.bin` daripada Decrypt9WIP `.zip` letakkan ke root kad SD anda dan tukar nama `Decrypt9WIP.bin` kepada `safehaxpayload.bin` +6. Pasang kembali kad SD anda ke dalam 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/ms_MY/Installing-arm9loaderhax.txt b/_pages/ms_MY/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/ms_MY/Installing-arm9loaderhax.txt +++ b/_pages/ms_MY/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/nl_NL/Decrypt9-(Homebrew-Launcher).txt b/_pages/nl_NL/Decrypt9-(Homebrew-Launcher).txt index 0e68ffb3ba..214c80be93 100644 --- a/_pages/nl_NL/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/nl_NL/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html ### Instructies 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Maak een map genaamd 'files9' in de hoofdmap van uw SD-kaart als het niet al bestaat -2. Kopiëren 'Safehax.3dsx' naar de map '/3ds/' op uw SD-kaart -3. 'Fasthax.3dsx' kopiëren naar de map '/ 3ds /' op uw SD-kaart -4. 'Decrypt9WIP.bin' van Decrypt9WIP '.zip' naar de root van uw SD-kaart kopiëren en de naam van 'Decrypt9WIP.bin' veranderen naar naar 'safehaxpayload.bin' -5. Stop je SD-kaart terug in je 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Maak een map genaamd 'files9' in de hoofdmap van uw SD-kaart als het niet al bestaat +3. Kopiëren 'Safehax.3dsx' naar de map '/3ds/' op uw SD-kaart +4. 'Fasthax.3dsx' kopiëren naar de map '/ 3ds /' op uw SD-kaart +5. 'Decrypt9WIP.bin' van Decrypt9WIP '.zip' naar de root van uw SD-kaart kopiëren en de naam van 'Decrypt9WIP.bin' veranderen naar naar 'safehaxpayload.bin' +6. Stop je SD-kaart terug in je 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/nl_NL/Installing-arm9loaderhax.txt b/_pages/nl_NL/Installing-arm9loaderhax.txt index b9d4620389..242508612e 100644 --- a/_pages/nl_NL/Installing-arm9loaderhax.txt +++ b/_pages/nl_NL/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ Indien je vóór het volgen van deze handleiding al een EmuNAND setup had en de {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Ga naar "SysNAND Backup/Restore" -4. Ga naar "SysNAND Restore (keep a9lh)" en zet 'NANDmin.bin' terug -5. Druk op (Start) om opnieuw op te starten +2. Ga naar "SysNAND Backup/Restore" +3. Ga naar "SysNAND Restore (keep a9lh)" en zet 'NANDmin.bin' terug +4. Druk op (Start) om opnieuw op te starten + Als je een zwart scherm ziet, [Volg 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. Indien je backup een versie tussen 3.0.0 en 4.5.0 had, zal je console niet opstarten totdat je handmatig de vereiste firmware downloadt: + Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) en hernoem het bestand naar `firmware.bin` Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Kopieer `firmware.bin` en `cetk` naar de `/luma/` map op je SD kaart + Verwijder beide bestanden na het updaten van je 3DS -7. Update je 3DS door naar System Settings (systeeminstellingen) en dan naar "Other Settings" (andere instellingen) te gaan. Ga in dat menu helemaal naar rechts en klik op "System Update" (systeemupdate) +6. Update je 3DS door naar System Settings (systeeminstellingen) en dan naar "Other Settings" (andere instellingen) te gaan. Ga in dat menu helemaal naar rechts en klik op "System Update" (systeemupdate) + Updaten terwijl je A9LH + Luma (wat je hebt) gebruikt zijn veilig, stop met hierover vragen te stellen + De waarschuwing over het nooit het updaten van een nieuwe 3DS vanuit 2.1.0 is niet van toepassing nadat je NAND backup hersteld is. + Als dit je een foutmelding geeft, zet dan je DNS instellingen op "auto" @@ -136,12 +136,12 @@ Indien je vóór het volgen van deze handleiding al een EmuNAND setup had en de ##### Deel V - FBI Injecteren 1. Boot your device while holding (Start) to enter Hourglass9 -3. Ga naar "SysNAND Backup/Restore" en selecteer de "Health&Safety Dump" optie om Health & Safety te dumpen naar`hs.app` **(je kan de vierpuntdruktoets gebruiken om de juiste file te selecteren)** -4. Druk op (B) en selecteer de "Health&Safety Inject" optie -5. Selecteer de FBI injectable '.app' voor jou regio -6. Druk op (A) en bevestig het injecteren -7. Druk op (Start) om opnieuw op te starten -8. Als je nog de originele Health & Safety app te zien krijgt en je in het verleden gedowngraded hebt met Gateway, [volg dan deze uitleg](troubleshooting#gw_fbi) +2. Ga naar "SysNAND Backup/Restore" en selecteer de "Health&Safety Dump" optie om Health & Safety te dumpen naar`hs.app` **(je kan de vierpuntdruktoets gebruiken om de juiste file te selecteren)** +3. Druk op (B) en selecteer de "Health&Safety Inject" optie +4. Selecteer de FBI injectable '.app' voor jou regio +5. Druk op (A) en bevestig het injecteren +6. Druk op (Start) om opnieuw op te starten +7. Als je nog de originele Health & Safety app te zien krijgt en je in het verleden gedowngraded hebt met Gateway, [volg dan deze uitleg](troubleshooting#gw_fbi) ##### Deel VI - De setup afronden diff --git a/_pages/no_NO/2.1.0-ctrtransfer.txt b/_pages/no_NO/2.1.0-ctrtransfer.txt index 687a219e93..140f1f8555 100644 --- a/_pages/no_NO/2.1.0-ctrtransfer.txt +++ b/_pages/no_NO/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /2.1.0-ctrtransfer.html Hvis du nedgraderte til 2.1.0 på en 2DS eller Nye 3DS og lot trådløs kommunikasjon være avslått, kan du aktivere trådløs igjen ved å fjerne batteriet og koble fra laderen på konsollen i noen sekunder og så starte den opp igjen. {: .notice--info} -If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0, make sure to have a microSD card reader on hand before proceeding. +If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. {: .notice--info} Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide. diff --git a/_pages/no_NO/Decrypt9-(Homebrew-Launcher).txt b/_pages/no_NO/Decrypt9-(Homebrew-Launcher).txt index 23a0904ea5..42d3a69231 100644 --- a/_pages/no_NO/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/no_NO/Decrypt9-(Homebrew-Launcher).txt @@ -12,16 +12,19 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instruksjoner +1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer 1. Create a folder named `files9` on the root of your SD card if it does not already exist 2. Kopier `safehax.3dsx` til mappen `/3ds/` på SD-kortet 3. Kopier `fasthax.3dsx` til mappen `/3ds/` på SD-kortet 4. Kopier `Decrypt9WIP.bin` fra Decrypt9WIP `.zip` til roten av SD-kortet og endre navnet `Decrypt9WIP.bin` til `safehaxpayload.bin` 5. Reinsert your SD card into your 3DS -6. Enter the homebrew launcher -7. Launch fasthax -8. Once it has completed, press (Start) to exit back to the homebrew launcher +6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +7. Launch fasthax from the list of homebrew + + You may have to scroll down to see this option +8. Once it has completed, press (Start) to exit back to the Homebrew Launcher + This may take several tries -9. Launch safehax +9. Launch safehax from the list of homebrew + + You may have to scroll down to see this option 10. If the exploit was successful, you will have booted into Decrypt9 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) diff --git a/_pages/no_NO/Hardmod-Downgrade.txt b/_pages/no_NO/Hardmod-Downgrade.txt index 65f15e64e4..72d7bca67b 100644 --- a/_pages/no_NO/Hardmod-Downgrade.txt +++ b/_pages/no_NO/Hardmod-Downgrade.txt @@ -46,7 +46,7 @@ Dette vil fungere på Ny 3DS, Gammel 3DS og 2DS. 1. Kopier, og sammenslå `3ds` mappen fra 3DSident `.zip` til SD-kortet 2. Sett inn SD-kortet i konsollen -3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the homebrew launcher on the device +3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the Homebrew Launcher on the device 4. Kjør 3DSident 5. Verify that the following: + **Kernel version**: 2.50-11 diff --git a/_pages/no_NO/Homebrew-Launcher-(Soundhax).txt b/_pages/no_NO/Homebrew-Launcher-(Soundhax).txt index 7122305ff0..4ea3211196 100644 --- a/_pages/no_NO/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/no_NO/Homebrew-Launcher-(Soundhax).txt @@ -26,7 +26,9 @@ SoundHax er kompatibel med versjonene fra 9.0.0 til og med 11.2.0 i EUR, JPN, KO 6. Gå gjennom alle fugletipsene, og steng deretter appen normalt og åpne den på nytt + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 7. Spill av SoundHax `.m4a` -8. Your console should load the homebrew menu + + This may take several tries + + If it freezes, just force the console to power off by holding the power button, then try again +8. Your console should load the Homebrew Launcher Fortsett til [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/no_NO/Installing-arm9loaderhax.txt b/_pages/no_NO/Installing-arm9loaderhax.txt index d20f2e71c9..d13fff33f4 100644 --- a/_pages/no_NO/Installing-arm9loaderhax.txt +++ b/_pages/no_NO/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ I denne seksjonen, vil vi gå gjennom prosessen som alle de andre trinnene har l This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install. -Filen `arm9loaderhax.bin` er det som startes av arm9loaderhax, etter at den er ferdig med å laste NAND, og kan være enhver gyldig arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads by holding buttons on boot. +Filen `arm9loaderhax.bin` er det som startes av arm9loaderhax, etter at den er ferdig med å laste NAND, og kan være enhver gyldig arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. @@ -31,7 +31,7 @@ Once arm9loaderhax is installed and Luma3DS is setup with the correct options, w During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* -+ **Luma3DS Updater** *(updates our CFW installation easily)* ++ **Luma3DS Updater** *(updates your CFW installation easily)* + **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)* #### Det du trenger @@ -47,7 +47,6 @@ During this process, we also setup programs such as the following: * Siste utgave av [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) * Siste utgave av [DspDump](https://github.com/Cruel/DspDump/releases/latest) * Siste utgave av [FBI](https://github.com/Steveice10/FBI/releases/latest) -* Siste utgave av [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) #### Instruksjoner @@ -66,22 +65,16 @@ During this process, we also setup programs such as the following: 1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system** 2. Opprett en mappe kalt `cias` på roten av SD-kortet hvis den ikke allerede er der -3. **Slett `a9lh` mappen fra roten av SD-kortet hvis den eksisterer** - + **If you accidentally install arm9loaderhax using another device's `otp.bin`, you will BRICK!** -4. Slett `3ds` mappen fra roten av SD-kortet -5. **Kopier _innholdet av_ `starter` mappen i `starter.zip` til roten av SD-kortet** - + Dette gjelder også den nye `3ds` mappen som erstatter den du nettop slettet 6. Kopier _innholdet av_ SafeA9LHInstaller `.7z` til roten av SD-kortet -7. **Kopier `a9lh` mappen fra data_input `.zip` til roten av SD-kortet** -8. **Kopier _innholdet av_ arm9loaderhax `.7z` til `a9lh` mappen på SD-kortet** +7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card +8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card 9. Kopier `hblauncher_loader.cia` fra hblauncher_loader `.zip` til `/cias/` mappen på SD-kortet 10. Kopier `lumaupdater.cia` fra Luma3DS Updater `.zip` til `/cias/` mappen på SD-kortet 11. Kopier `FBI.cia` fra FBI `.zip` til `/cias/` mappen på SD-kortet -12. **Kopier `arm9loaderhax.bin` fra Luma3DS `.7z` til roten av SD-kortet, og erstatt eksisterende filer** +12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files 13. Opprett en mappe med navn `luma` på roten av SD-kortet 14. Opprett en mappe med navnet `payloads` i `luma` mappen på SD-kortet 15. Kopier `Hourglass9.bin` fra Hourglass9 `.zip` til `/luma/payloads/` mappen på SD-kortet og endre navnet fra `Hourglass9.bin` til `start_Hourglass9.bin` -16. Kopier `GodMode9.bin` fra GodMode9 `.zip` til `/luma/payloads/` mappen på SD-kortet og endre navnet fra `GodMode9.bin` til`up_GodMode9.bin` 17. Kopier `aeskeydb.bin` til `/files9/` mappen på SD-kortet 18. Kopier `DspDump.3dsx` til `/3ds/` mappen på SD-kortet 19. Kopier _innholdet av_ `fbi-2.4.2-injectable.zip` til `/files9/` mappen på SD-kortet @@ -95,7 +88,7 @@ During this process, we also setup programs such as the following: + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser) + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen) - + Hvis wifi er slått av, koble fra laderen og fjern batteriet i noen sekunder for å aktivere wifi + + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + Press (Select) to Full Install + The installer will now install arm9loaderhax on your device (this is very fast) + Shut down your console by pressing any button @@ -103,7 +96,7 @@ During this process, we also setup programs such as the following: ##### Section III - Configuring Luma3DS -1. Hold (Select) on boot to enter the Luma3DS menu +1. Boot your device while holding (Select) to enter the Luma3DS configuration menu + Make sure to start holding the button before pressing power + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_a9lh) + If you boot to SafeA9LHInstaller, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh) @@ -111,7 +104,7 @@ During this process, we also setup programs such as the following: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you should *also* enable the following: +3. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" til "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again @@ -124,32 +117,31 @@ During this process, we also setup programs such as the following: If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section. {: .notice--info} -1. Åpne Hourglass9 fra arm9loaderhax ved å holde (Start) under oppstart -2. Gå til "SysNAND Backup/Restore" -3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -4. Press (Start) to reboot +1. Boot your device while holding (Start) to enter Hourglass9 +3. Gå til "SysNAND Backup/Restore" +4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +5. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) -5. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: +6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) og endre navnet til `firmware.bin` + Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Kopier `firmware.bin` og `cetk` til `/luma/` mappen på SD-kortet + Delete both of these files after updating your 3DS -2. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) - ##### Section V - Injecting FBI -1. Åpne Hourglass9 fra arm9loaderhax ved å holde (Start) under oppstart -2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -3. Press (B), then select the "Health&Safety Inject" option -4. Select the FBI injectable `.app` for your region -5. Press (A) and confirm to inject -6. Press (Start) to reboot -7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +1. Boot your device while holding (Start) to enter Hourglass9 +3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +4. Press (B), then select the "Health&Safety Inject" option +5. Select the FBI injectable `.app` for your region +6. Press (A) and confirm to inject +7. Press (Start) to reboot +8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup @@ -169,19 +161,19 @@ If, before following this guide, you already had an EmuNAND setup and would like 14. Launch the Homebrew Launcher from the home menu 15. Velg "DSP Dump" 16. Press (Start) when prompted to exit -17. Reboot while holding (Start) to launch Hourglass9 -18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -20. Press (Select) on the main menu to eject your SD card -21. Press (Start) to reboot with the SD card removed +17. Boot your device while holding (Start) to enter Hourglass9 +19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +21. Press (Select) on the main menu to eject your SD card +22. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation -22. Bruk (A)-knappen og piltastene for å aktivere følgende: +23. Bruk (A)-knappen og piltastene for å aktivere følgende: + **"Show NAND or user string in System Settings"** -23. If you are using a **New 3DS**, you should *also* enable the following: +24. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" til "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -24. Reinsert your SD card, then press (Start) to save and reboot! +25. Reinsert your SD card, then press (Start) to save and reboot! ___ @@ -191,7 +183,7 @@ If DSi / DS functionality has broken (such as DS carts or DSiWare no longer work {% capture notice-10 %} You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. -This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use whatever version you placed in CTR NAND. +This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use the version you placed in CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
@@ -199,7 +191,7 @@ This will only update the Luma3DS files on the SD Card. If you boot the device w {% capture notice-6 %} You will now boot a Custom Firmware based SysNAND by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. -You can now hold (Start) on boot to launch Hourglass9, an arm9loaderhax safe multipurpose NAND and cartridge tool. +You can now hold (Start) on boot to launch Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/no_NO/Move-EmuNAND.txt b/_pages/no_NO/Move-EmuNAND.txt index 865d1d1d43..a5bff637ef 100644 --- a/_pages/no_NO/Move-EmuNAND.txt +++ b/_pages/no_NO/Move-EmuNAND.txt @@ -23,30 +23,30 @@ You will LOSE your GBA VC and DSiWare saves! 1. Kopier `GodMode9.bin` fra GodMode9 `.zip` til `/luma/payload/` mappen på SD-kortet ditt og endre navnet `GodMode9.bin` i `/luma/payloads` til `up_GodMode9.bin` 2. Sett inn SD-kortet i konsollen 3. Åpne Hourglass9 fra arm9loaderhax ved å holde (Start) under oppstart -4. Gå til "EmuNAND Backup/Restore", og velg deretter "EmuNAND Backup" for å sikkerhetskopiere EmuNAND til `NANDmin_emu.bin` -5. Trykk (B) å komme tilbake til hovedmenyen -6. Gå til "SysNAND Backup/Restore", og velg deretter "SysNAND Restore (keep a9lh)" for å gjenopprette SysNAND fra `NANDmin_emu.bin` -7. Trykk (Select) for å løse ut SD-kortet -8. Putt SD-kortet inn i datamaskinen, kopier deretter `NANDmin_emu.bin` og `NANDmin_emu.bin.sha` fra `/files9/` mappen på SD-kortet til en sikker plass +5. Gå til "EmuNAND Backup/Restore", og velg deretter "EmuNAND Backup" for å sikkerhetskopiere EmuNAND til `NANDmin_emu.bin` +6. Trykk (B) å komme tilbake til hovedmenyen +7. Gå til "SysNAND Backup/Restore", og velg deretter "SysNAND Restore (keep a9lh)" for å gjenopprette SysNAND fra `NANDmin_emu.bin` +8. Trykk (Select) for å løse ut SD-kortet +9. Putt SD-kortet inn i datamaskinen, kopier deretter `NANDmin_emu.bin` og `NANDmin_emu.bin.sha` fra `/files9/` mappen på SD-kortet til en sikker plass + Lagre sikkerhetskopien flere plasser + Denne sikkerhetskopien vil spare deg fra en brick hvis noe går galt i fremtiden + **Sikkerhetskopien din skal samsvare med en av størrelse på [denne](nand-size) siden; hvis ikke, bør du slette den og lage en ny!** -9. Slett `NANDmin_emu.bin` fra `/files9/` mappen på SD-kortet etter du har kopiert den -10. **Sikkerhetskopiér alle filene på SD-kortet til en mappe på datamaskinen, alle filene vil slettes i det neste trinnet** -11. Sett inn SD-kortet i konsollen -12. Press (Start) to reboot while holding (Up) to open GodMode9 -13. Press the (Home) button to bring up the action menu -14. Velg "SD format menu" -15. Trykk (A) for å bekrefte -16. Velg "No EmuNAND" -17. Velg "Auto" -18. Enter the prompted button combination to confirm -19. Hold (R) and press (B) at the same time to eject your SD card -20. Put your SD card in your computer, then copy all your files back into it +10. Slett `NANDmin_emu.bin` fra `/files9/` mappen på SD-kortet etter du har kopiert den +11. **Sikkerhetskopiér alle filene på SD-kortet til en mappe på datamaskinen, alle filene vil slettes i det neste trinnet** +12. Sett inn SD-kortet i konsollen +13. Press (Start) to reboot while holding (Up) to open GodMode9 +14. Press the (Home) button to bring up the action menu +15. Velg "SD format menu" +16. Trykk (A) for å bekrefte +17. Velg "No EmuNAND" +18. Velg "Auto" +19. Enter the prompted button combination to confirm +20. Hold (R) and press (B) at the same time to eject your SD card +21. Put your SD card in your computer, then copy all your files back into it + Ensure you replace the `arm9loaderhax.bin` file on the SD card with the one from your backup -21. Sett inn SD-kortet i konsollen -22. Trykk (A) for å montere SD-kortet på nytt -23. Trykk (Start) for omstart! -24. + Hvis du får en svart skjerm, [følg denne feilsøkingsveiledningen](troubleshooting#ts_sys_down) +22. Sett inn SD-kortet i konsollen +23. Trykk (A) for å montere SD-kortet på nytt +24. Trykk (Start) for omstart! +25. + Hvis du får en svart skjerm, [følg denne feilsøkingsveiledningen](troubleshooting#ts_sys_down) Tilbake til [Installere arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/no_NO/Region-Changing.txt b/_pages/no_NO/Region-Changing.txt index 2876bd65c4..5ea6d5fbbc 100644 --- a/_pages/no_NO/Region-Changing.txt +++ b/_pages/no_NO/Region-Changing.txt @@ -40,11 +40,12 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot #### Instruksjoner -**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +{: .notice--info} ##### Seksjon I - Forarbeid -1. Kopier `GodMode9.bin` fra GodMode9 `.zip` til `/luma/payload/` mappen på SD-kortet ditt og endre navnet `GodMode9.bin` i `/luma/payloads` til `up_GodMode9.bin` +1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 2. Kopier `Decrypt9WIP.bin` til `/luma/payloads/` mappen på SD-kortet og ombenenn `Decrypt9WIP.bin` til `x_Decrypt9WIP.bin` 3. Kopier 9.2.0 ctrtransferbildet `.bin` og `. bin.sha` fra ctrtransfer `.zip` til mappen `/files9/` på SD-kortet 4. Sett inn SD-kortet i konsollen @@ -52,12 +53,13 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Seksjon II - Sikkerhetskopi av tickets og konfigurasjonssaver 1. Trykk (Start) og hold (X) for omstart til arm9loaderhax Decrypt9 -2. Gå til "Ticket/Titlekey Options", og velg "Ticket Dump (SysNAND)" -3. Trykk (Select) for å løse ut SD-kortet, og sett det deretter inn i datamaskinen -4. Slett alle `.tik` filer i mappen `/files9/` som **ikke** starter med "00-" -5. La alle `.tik` filer som begynner med "00-" være i mappen -6. Sett inn SD-kortet i 3DSen, og trykk (B) for å gå tilbake til hovedmenyen -7. Gå til "SysNAND Options", deretter "System Save Dump", og velg "Dump configsave.bin" +2. Hover over Decrypt9WIP, then press (A) to launch it +3. Gå til "Ticket/Titlekey Options", og velg "Ticket Dump (SysNAND)" +4. Trykk (Select) for å løse ut SD-kortet, og sett det deretter inn i datamaskinen +5. Slett alle `.tik` filer i mappen `/files9/` som **ikke** starter med "00-" +6. La alle `.tik` filer som begynner med "00-" være i mappen +7. Sett inn SD-kortet i 3DSen, og trykk (B) for å gå tilbake til hovedmenyen +8. Gå til "SysNAND Options", deretter "System Save Dump", og velg "Dump configsave.bin" ### Seksjon III - ctroverførsel @@ -75,7 +77,7 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section IV - Editing SecureInfo -1. Trykk (Start) og hold (Opp) for omstart til arm9loaderhax GodMode9 +1. Trykk (Start) og hold (Opp) for omstart til arm9loaderhax GodMode9 2. Navigate to `SYSNAND CTRNAND` -> `rw` -> `sys` 3. Trykk (Y) på `SecureInfo_A` for å kopiere den 4. Trykk (Y) for å lime inn en kopi av `SecureInfo_A` @@ -119,7 +121,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section VII - Restore config save -1. Reboot holding (X) during boot to launch arm9loaderhax Decrypt9 +1. Trykk (Start) og hold (X) for omstart til arm9loaderhax Decrypt9 +2. Hover over Decrypt9WIP, then press (A) to launch it 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). diff --git a/_pages/no_NO/Updating-A9LH.txt b/_pages/no_NO/Updating-A9LH.txt index c2b5091c7a..6fc835f829 100644 --- a/_pages/no_NO/Updating-A9LH.txt +++ b/_pages/no_NO/Updating-A9LH.txt @@ -27,7 +27,7 @@ Disse trinnene vil også oppdatere dine ulike nyttelastene og AES nøkkel databa #### Det du trenger * [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * Siste utgave av [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(`.7z`-filen)* * Siste utgave av [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(`.7z`-filen)* * Siste utgave av [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) @@ -44,18 +44,18 @@ Disse trinnene vil også oppdatere dine ulike nyttelastene og AES nøkkel databa 4. Kopier `Hourglass9.bin` fra Hourglass9 `.zip` til `/luma/payloads/` mappen på SD-kortet og endre navnet fra `Hourglass9.bin` til `start_Hourglass9.bin` 5. Kopier `arm9loaderhax.bin` fra SafeA9LHInstaller `.zip` til `/luma/payloads/` mappen på SD-kortet 6. Endre navn på `arm9loaderhax.bin` i `/luma/payloads/` til `down_safea9lhinstaller.bin` -7. Kopier `a9lh` mappen fra `data_input_v4.zip` til roten av SD-kortet +7. Copy the `a9lh` folder from data_input `.zip` to the root of your SD Card 8. Kopier _inhholdet av_ arm9loaderhax `.7z` til `a9lh` mappen på SD kortet ditt 9. Kopier `arm9loaderhax.bin` fra Luma3DS `.zip` til roten av SD-kortet, og erstatter eksisterende filer 10. Sett inn SD-kortet i konsollen ##### Seksjon II - Oppdatering av nyttelast "Payload" -1. Hold (Ned)-knappen og start konsollen +1. Sett SD-kortet inn i konsollen, hold (Select) og slå konsollen på 2. Trykk (Select) for å oppdatere arm9loaderhax 3. Slå av enheten, og sett inn SD-kortet i datamaskinen 4. Slett `a9lh` mappen fra roten av SD-kortet -5. Slett `down_safea9lhinstaller.bin` fra `/luma/payloads/` +5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` ##### Seksjon III - Konfigurering av Luma3DS diff --git a/_pages/pl_PL/Decrypt9-(Homebrew-Launcher).txt b/_pages/pl_PL/Decrypt9-(Homebrew-Launcher).txt index 205de318a0..8aa70b9229 100644 --- a/_pages/pl_PL/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/pl_PL/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ Najnowszej wersji [fasthax] (https://github.com/nedwill/fasthax/releases/latest) #### Instrukcje 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Stwórz folder o nazwie "files9" w głównym katalogu twojej karty SD, jeśli jeszcze nie istnieje -2. Skopiuj plik `safehax.3dsx do folderu `/3ds/` na twojej karcie SD -3. Skopiuj `fasthax.3dsx` do folderu "/3ds/" na twojej karcie SD -4. Skopiuj plik 'Decrypt9WIP.bin' z archiwum Decrypt9WIP `.zip` do katalogu głównego karty SD i zmień nazwę pliku 'Decrypt9WIP.bin' na 'safehaxpayload.bin' -5. Włóż kartę SD z powrotem do konsoli -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Stwórz folder o nazwie "files9" w głównym katalogu twojej karty SD, jeśli jeszcze nie istnieje +3. Skopiuj plik `safehax.3dsx do folderu `/3ds/` na twojej karcie SD +4. Skopiuj `fasthax.3dsx` do folderu "/3ds/" na twojej karcie SD +5. Skopiuj plik 'Decrypt9WIP.bin' z archiwum Decrypt9WIP `.zip` do katalogu głównego karty SD i zmień nazwę pliku 'Decrypt9WIP.bin' na 'safehaxpayload.bin' +6. Włóż kartę SD z powrotem do konsoli 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/pl_PL/Installing-arm9loaderhax.txt b/_pages/pl_PL/Installing-arm9loaderhax.txt index 52caaac410..cce490b851 100644 --- a/_pages/pl_PL/Installing-arm9loaderhax.txt +++ b/_pages/pl_PL/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ Jeśli przed rozpoczęciem tej instrukcji miałeś już zainstalowaną konfigura {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ Jeśli przed rozpoczęciem tej instrukcji miałeś już zainstalowaną konfigura ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/pt_BR/2.1.0-ctrtransfer.txt b/_pages/pt_BR/2.1.0-ctrtransfer.txt index 6a09e6c6df..36326ad6b3 100644 --- a/_pages/pt_BR/2.1.0-ctrtransfer.txt +++ b/_pages/pt_BR/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /pt_BR/2.1.0-ctrtransfer.html Se você fez o downgrade para a versão 2.1.0 em um 2DS ou New 3DS e deixou o Wi-Fi desligado, você pode ligar o Wi-Fi removendo a bateria e desconectando o carregador durante alguns segundos depois ligando o console novamente. {: .notice--info} -If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Certifique-se de ter um leitor de cartão SD disponível antes de prosseguir. +Se você usa o Gerenciador de microSD do New 3DS para transferir arquivos para o seu cartão SD, isto não funcionará mais na 2.1.0. Certifique-se de ter um leitor de cartão SD disponível antes de prosseguir. {: .notice--info} Seu dispositivo pode não mostrar os jogos instalados após o ctrtransfer. Isso acontece devido ao fato de que os tickets são removidos durante a transferência, e é por isso que você faz backup deles. Eles serão restaurados no final do guia. diff --git a/_pages/pt_BR/Decrypt9-(Homebrew-Launcher).txt b/_pages/pt_BR/Decrypt9-(Homebrew-Launcher).txt index 8abfee2836..e5d11b4c58 100644 --- a/_pages/pt_BR/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/pt_BR/Decrypt9-(Homebrew-Launcher).txt @@ -12,19 +12,18 @@ permalink: /pt_BR/decrypt9-(homebrew-launcher).html #### Instruções -1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Crie uma pasta chamada `files9` na raiz do seu cartão SD caso ela já não exista -2. Copie o `safehax.3dsx` para a pasta `/3ds/`do seu cartão SD -3. Copie o `fasthax.3dsx` para a pasta `/3ds/`do seu cartão SD -4. Copie o `Decrypt9WIP.bin` do `.zip` do Decrypt9 para a raiz do seu cartão SD e renomeie-o de `Decrypt9WIP.bin` para` safehaxpayload.bin` -5. Reinsira o cartão SD no seu 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) -7. Launch fasthax from the list of homebrew - + You may have to scroll down to see this option -8. Once it has completed, press (Start) to exit back to the Homebrew Launcher +1. Remova seu cartão SD do seu dispositivo, deixando-o no Homebrew Launcher, e então insira seu cartão SD no seu computador +2. Crie uma pasta chamada `files9` na raiz do seu cartão SD caso ela já não exista +3. Copie o `safehax.3dsx` para a pasta `/3ds/`do seu cartão SD +4. Copie o `fasthax.3dsx` para a pasta `/3ds/`do seu cartão SD +5. Copie o `Decrypt9WIP.bin` do `.zip` do Decrypt9 para a raiz do seu cartão SD e renomeie-o de `Decrypt9WIP.bin` para` safehaxpayload.bin` +6. Reinsira o cartão SD no seu 3DS +7. Abra o fasthax da lista de homebrews + + Você poderá ter que descer a tela para ver esta opção +8. Quando for completado, aperte (Start) para voltar ao Homebrew Launcher + Isto pode levar várias tentativas -9. Launch safehax from the list of homebrew - + You may have to scroll down to see this option +9. Abra o safehax da lista de homebrews + + Você poderá ter que descer a tela para ver esta opção 10. Se o exploit funcionar, o Decrypt9 estará aberto Continuar para [ctrtransfer para 2.1.0](2.1.0-ctrtransfer) diff --git a/_pages/pt_BR/Hardmod-Downgrade.txt b/_pages/pt_BR/Hardmod-Downgrade.txt index 46ca9bcf68..2e960aa24d 100644 --- a/_pages/pt_BR/Hardmod-Downgrade.txt +++ b/_pages/pt_BR/Hardmod-Downgrade.txt @@ -45,7 +45,7 @@ Isso irá funcionar no New 3DS, Old 3DS e 2DS. 1. Copie e mescle a pasta `3ds` do 3DSident `.zip` para o cartão SD do seu dispositivo 2. Reinsira seu cartão SD no dispositivo -3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the Homebrew Launcher on the device +3. Use o [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) para abrir o Homebrew Launcher no dispositivo 4. Abra o 3DSident 5. Verifique o seguinte: + **Kernel version**: 2.50-11 diff --git a/_pages/pt_BR/Home.txt b/_pages/pt_BR/Home.txt index d2018fbd1a..7cf949d7d0 100644 --- a/_pages/pt_BR/Home.txt +++ b/_pages/pt_BR/Home.txt @@ -6,7 +6,7 @@ header: overlay_image: images/home-page-feature.jpg overlay_filter: 0.5 cta_label: "Começar" # - cta_url: "get-started" # + cta_url: "/pt_BR/get-started" # caption: excerpt: "Um guia completo de Custom Firmware para o 3DS,
do zero até arm9loaderhax.
" # lang: pt diff --git a/_pages/pt_BR/Homebrew-Launcher-(Soundhax).txt b/_pages/pt_BR/Homebrew-Launcher-(Soundhax).txt index 63171d9cc2..ab5e2e75e9 100644 --- a/_pages/pt_BR/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/pt_BR/Homebrew-Launcher-(Soundhax).txt @@ -26,9 +26,9 @@ SoundHax é compatível com as versões de 9.0.0 a 11.2.0 nas regiões EUA, EUR, 6. Passe por todas os palpites dos papagaios, depois feche o aplicativo normalmente e abra-o novamente + Abrir o SoundHax imediatamente faria com que estes palpites aparecessem toda vez que o Som Nintendo 3DS fosse aberto até que isto fosse feito 7. Reproduza o SoundHax `.m4a` - + This may take several tries - + If it freezes, just force the console to power off by holding the power button, then try again -8. Your console should load the Homebrew Launcher + + Isto pode levar várias tentativas + + Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente +8. Seu console deve carregar o Homebrew Launcher Continuar para [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_BR/Installing-arm9loaderhax.txt b/_pages/pt_BR/Installing-arm9loaderhax.txt index 326a2ac874..da4d5ca9ff 100644 --- a/_pages/pt_BR/Installing-arm9loaderhax.txt +++ b/_pages/pt_BR/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ Nesta seção, vamos passar pela etapa à qual todas as outras etapas levaram: i Este é quase o melhor tipo possível de exploit do dispositivo, porque é permanentemente instalável nas partições FIRM da NAND e é executado antes da maior parte do sistema operacional carregar, permitindo que ele não só funcione em *todas* as versões depois de instalado, mas também consegue se proteger e oferecer meios de recuperar um 3DS brickado, como um menu HOME não-funcional ou a instalação de um título corrompido. -O arquivo `arm9loaderhax.bin` é o que é executado pelo próprio arm9loaderhax depois que ele termina o carregamento da NAND, e pode ser qualquer payload arm9 válido. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. +O arquivo `arm9loaderhax.bin` é o que é executado pelo próprio arm9loaderhax depois que ele termina o carregamento da NAND, e pode ser qualquer payload arm9 válido. Este arquivo pode ser substituído a qualquer momento, embora o Luma3DS permita o carregamento de outros payloads arm9 através de seu chainloader. Neste caso, usamos o Luma3DS por [AuroraWright](https://github.com/AuroraWright/) para carregar uma SysNAND com patches diretamente, o que nos permite evitar a necessidade de qualquer tipo de EmuNAND, simplificando enormemente o uso de um 3DS hackeado, além de economizar espaço no cartão SD. @@ -31,7 +31,7 @@ Assim que o arm9loaderhax estiver instalado e o Luma3DS estiver configurado com Durante este processo, também configuramos alguns programas como os seguintes: + **FBI** *(Instala jogos e aplicativos no formato CIA)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Luma3DS Updater** *(Atualiza sua instalação CFW facilmente)* + **Hourglass9** *(Ferramenta multiuso com funções de NAND e cartucho)* #### O que você precisa @@ -66,12 +66,12 @@ Durante este processo, também configuramos alguns programas como os seguintes: 1. **Se existir, copie a pasta `/ files9 /` do seu cartão SD para um local seguro em seu computador e faça backup em vários locais (como armazenamento on-line); Os arquivos dentro desta pasta pode salvá-lo de uma perda total de dados se você quebrar seu sistema** 2. Crie uma pasta chamada `cias` na raiz do seu cartão SD se ela ainda não existir 6. Copie _o conteúdo do_ `.7z` do SafeA9LHInstaller para a raiz do seu cartão SD -7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card -8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card +7. Copie a pasta `a9lh` do `.zip` do data_input para a raiz do seu cartão SD +8. Copie _o conteúdo_ do `.7z` da versão do arm9loaderhax para a pasta `a9lh` do seu cartão SD 9. Copie `hblauncher_loader.cia` do `.zip` do hblauncher_loader para a pasta `/cias/` do seu cartão SD 10. Copie `lumaupdater.cia` do `.zip` do Luma3DS Updater para a pasta `/cias/` do seu cartão SD 11. Copie `FBI.cia` do `.zip` do FBI para a pasta `/cias/` do seu cartão SD -12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files +12. Copie o arquivo `arm9loaderhax.bin`do `.7z` do Luma3DS para a raiz do seu cartão SD, substituindo quaisquer arquivos existentes 13. Crie uma pasta chamada `luma` na raiz do seu cartão SD 14. Crie uma pasta chamada `payloads` dentro da pasta `luma` do seu cartão SD 15. Copie `Hourglass9.bin` do `.zip` do Hourglass9 para a pasta `/luma/payloads/` do seu cartão SD e renomeie-o de `Hourglass9.bin` para `start_Hourglass9.bin` @@ -88,7 +88,7 @@ Durante este processo, também configuramos alguns programas como os seguintes: + Se você receber o erro "This service is not available in your region", use as Configurações do Console para definir o país do dispositivo para coincidir com a região da NAND que você instalou com o ctrtransfer para a versão 2.1.0 + Se você receber outro erro, [siga este guia de troubleshooting](troubleshooting#ts_browser) + Se você receber uma tela irregular, [siga este guia de troubleshooting](troubleshooting#ts_safe_a9lh_screen) - + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + Caso você esteja em um 2DS ou New 3DS e deixou a comunicação sem fio desligada, você pode religá-la removendo a bateria e desconectando o carregador durante alguns segundos e depois ligando o console novamente + Aperte (Select) para realizar a instalação completa + O instalador instalará o arm9loaderhax no seu dispositivo (isso é muito rápido) + Desligue seu console apertando qualquer botão @@ -96,7 +96,7 @@ Durante este processo, também configuramos alguns programas como os seguintes: ##### Seção III - Configurando Luma3DS -1. Boot your device while holding (Select) to enter the Luma3DS configuration menu +1. Inicialize seu dispositivo enquanto segura (Select) para entrar no menu de configuração do Luma3DS + Certifique-se de começar a segurar o botão antes de apertar o botão Power + Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_a9lh) + Se você inicializar e carregar o SafeA9LHInstaller, [siga este guia de troubleshooting](troubleshooting#ts_safe_a9lh) @@ -104,7 +104,7 @@ Durante este processo, também configuramos alguns programas como os seguintes: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you can *also* enable the following: +3. Se você estiver usando um **New 3DS** você *também* pode habilitar o seguinte: + **"New 3DS CPU" para "Clock+L2(x)"** + Isso aumentará a taxa de quadros de muitos jogos, mas pode causar instabilidade em outros + Se alguns jogos não funcionarem corretamente, desative essa opção e tente novamente @@ -117,17 +117,17 @@ Durante este processo, também configuramos alguns programas como os seguintes: Se, antes de seguir este guia, você já tinha uma configuração EmuNAND e gostaria de mover o conteúdo da sua EmuNAND anterior para o seu novo CFW SysNAND, agora é a hora de [seguir Mover EmuNAND](move-emunand) ao invés de seguir as quatro primeiras etapas nesta seção. {: .notice--info} -1. Boot your device while holding (Start) to enter Hourglass9 -3. Vá para "SysNAND Backup/Restore" -4. Vá para "SysNAND Restore (keep a9lh)" e restaure o arquivo `NANDmin.bin` -5. Aperte (Start) para reiniciar +1. Inicialize seu dispositivo enquanto segura (Start) para iniciar o Hourglass9 +2. Vá para "SysNAND Backup/Restore" +3. Vá para "SysNAND Restore (keep a9lh)" e restaure o arquivo `NANDmin.bin` +4. Aperte (Start) para reiniciar + Se você receber uma tela preta, [siga ctrtransfer para 9.2.0](9.2.0-ctrtransfer) -6. Se o seu backup era de uma versão entre 3.0.0 e 4.5.0, o console não ligará completamente até que você faça o download manual do firmware necessário: +5. Se o seu backup era de uma versão entre 3.0.0 e 4.5.0, o console não ligará completamente até que você faça o download manual do firmware necessário: + Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e renomeie-o para `firmware.bin` + Baixe [este arquivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copie `firmware.bin` e `cetk` para a pasta `/luma/` do seu cartão SD + Apague ambos os arquivos após atualizar seu 3DS -7. Atualize o seu 3DS indo em Configurações do Console, "Outras Configurações", indo até a direita e selecionando "Atualização" +6. Atualize o seu 3DS indo em Configurações do Console, "Outras Configurações", indo até a direita e selecionando "Atualização" + As atualizações feitas enquanto se usa o A9LH + Luma (o que você possui) são seguras, pare de perguntar sobre isso + O aviso sobre nunca atualizar um New 3DS na versão 2.1.0 não se aplica após a restauração do backup da NAND. + Se isso lhe der um erro, defina suas configurações de DNS para "Automático" @@ -135,13 +135,13 @@ Se, antes de seguir este guia, você já tinha uma configuração EmuNAND e gost ##### Seção V - Injetando o FBI -1. Boot your device while holding (Start) to enter Hourglass9 -3. Vá para "SysNAND Backup/Restore" e selecione a opção "Health&Safety Dump" para despejar o aplicativo Informações sobre saúde e segurança para `hs.app` **(você pode usar Cima e Baixo / Esquerda e Direita para mudar o nome)** -4. Aperte (B), e então selecione a opção "Health&Safety Inject" -5. Selecione o `.app` injetável do FBI correspondente à sua região -6. Aperte (A) para confirmar a injeção -7. Aperte (Start) para reiniciar -8. Se você ainda estiver inicializando o aplicativo Informações sobre saúde e segurança padrão e realizou um downgrade pelo Gateway no passado, [siga este guia de troubleshooting](troubleshooting#gw_fbi) +1. Inicialize seu dispositivo enquanto segura (Start) para iniciar o Hourglass9 +2. Vá para "SysNAND Backup/Restore" e selecione a opção "Health&Safety Dump" para despejar o aplicativo Informações sobre saúde e segurança para `hs.app` **(você pode usar Cima e Baixo / Esquerda e Direita para mudar o nome)** +3. Aperte (B), e então selecione a opção "Health&Safety Inject" +4. Selecione o `.app` injetável do FBI correspondente à sua região +5. Aperte (A) para confirmar a injeção +6. Aperte (Start) para reiniciar +7. Se você ainda estiver inicializando o aplicativo Informações sobre saúde e segurança padrão e realizou um downgrade pelo Gateway no passado, [siga este guia de troubleshooting](troubleshooting#gw_fbi) ##### Seção VI - Finalizando a configuração @@ -161,7 +161,7 @@ Se, antes de seguir este guia, você já tinha uma configuração EmuNAND e gost 14. Abra o Homebrew Launcher pelo menu HOME 15. Selecione "DSP Dump" 16. Aperte (Start) quando solicitado para sair -17. Boot your device while holding (Start) to enter Hourglass9 +17. Inicialize seu dispositivo enquanto segura (Start) para iniciar o Hourglass9 19. Vá para "SysNAND Backup/Restore", e então selecione "Health&Safety Inject" 20. Selecione `hs.app` (o original que não contém o FBI), e então aperte (A) para confirmar a injeção 21. Aperte (Select) no menu principal para ejetar seu cartão SD @@ -169,7 +169,7 @@ Se, antes de seguir este guia, você já tinha uma configuração EmuNAND e gost + Ao inicializar o dispositivo pelo menos uma vez com o cartão SD removido, você poderá configurar a instalação do Luma3DS baseada na CTRNAND 23. Use o botão (A) e os botões direcionais para ativar o seguinte: + **"Show NAND or user string in System Settings"** -24. If you are using a **New 3DS**, you can *also* enable the following: +24. Se você estiver usando um **New 3DS** você *também* pode habilitar o seguinte: + **"New 3DS CPU" para "Clock+L2(x)"** + Isso aumentará a taxa de quadros de muitos jogos, mas pode causar instabilidade em outros + Se alguns jogos não funcionarem corretamente, desative essa opção e tente novamente @@ -183,7 +183,7 @@ Se a funcionalidade DSi / DS estiver quebrada (como cartuchos de DS ou DSiWare n {% capture notice-10 %} Você pode usar o Luma3DS Updater para atualizar o seu Luma3DS para a última versão abrindo-o e apertando (A). Isso não é a mesma coisa que uma atualização do sistema; ele apenas faz o download e extrai os arquivos mais recentes do Luma3DS. -Isso só atualizará os arquivos do Luma3DS no cartão SD. If you boot the device without an SD card, it will use the version you placed in CTR NAND. +Isso só atualizará os arquivos do Luma3DS no cartão SD. Se você inicializar o dispositivo sem um cartão SD, ele usará a versão que você colocou na CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
@@ -191,7 +191,7 @@ Isso só atualizará os arquivos do Luma3DS no cartão SD. If you boot the devic {% capture notice-6 %} Agora você inicializará uma SysNAND baseada em Custom Firmware por padrão. Agora você pode segurar (Select) durante a inicialização para abrir o menu de configuração do Luma3DS. -You can now hold (Start) on boot to launch Hourglass9. +Você agora pode segurar (Start) durante a inicialização para iniciar o Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/pt_BR/Move-EmuNAND.txt b/_pages/pt_BR/Move-EmuNAND.txt index d8a749ebf6..ececf86c32 100644 --- a/_pages/pt_BR/Move-EmuNAND.txt +++ b/_pages/pt_BR/Move-EmuNAND.txt @@ -23,30 +23,30 @@ Você vai PERDER seus saves do VC de GBA e DSiWare! 1. Copie `GodMode9.bin` do arquivo GodMode9 `.zip` para a pasta `/luma/payloads/` no seu cartão SD e renomeie `GodMode9.bin` na pasta `/luma/payloads/` para `up_GodMode9.bin` 2. Reinsira o cartão SD no seu 3DS 3. Abra o Hourglass9 pelo arm9loaderhax segurando (Start) durante a inicialização -5. Vá para "EmuNAND Backup/Restore" e, em seguida, selecione a opção "EmuNAND Backup" para fazer backup da sua EmuNAND para 'NANDmin_emu.bin' -6. Aperte (B) para voltar para o menu principal -7. Vá para "SysNAND Backup/Restore" e, em seguida, selecione a opção "SysNAND Restore (keep a9lh)" para restaurar da SysNAND de `NANDmin_emu.bin` -8. Aperte (Select) para ejetar o cartão SD -9. Coloque o seu cartão SD no seu computador, então copie `NANDmin_emu.bin` e `NANDmin_emu.bin.sha` da pasta `/files9/` no seu cartão SD para um local seguro +4. Vá para "EmuNAND Backup/Restore" e, em seguida, selecione a opção "EmuNAND Backup" para fazer backup da sua EmuNAND para 'NANDmin_emu.bin' +5. Aperte (B) para voltar para o menu principal +6. Vá para "SysNAND Backup/Restore" e, em seguida, selecione a opção "SysNAND Restore (keep a9lh)" para restaurar da SysNAND de `NANDmin_emu.bin` +7. Aperte (Select) para ejetar o cartão SD +8. Coloque o seu cartão SD no seu computador, então copie `NANDmin_emu.bin` e `NANDmin_emu.bin.sha` da pasta `/files9/` no seu cartão SD para um local seguro + Faça backups em vários locais + Este backup vai salvá-lo de um brick caso algo dê errado no futuro + **O tamanho do seu backup deve ser igual a um dos contidos nesta [this](nand-size) página; senão, você deve apagá-lo e fazer um novo!** -10. Apague `NANDmin_emu.bin` da pasta `/files9/` do cartão SD depois de copiá-lo -11. **Faça backup de todos os arquivos no seu cartão SD para uma pasta no seu computador; todos os arquivos serão apagados na próxima etapa** -12. Reinsira o cartão SD no seu 3DS -13. Aperte (Start) para reiniciar segurando (Cima) para abrir o GodMode9 -14. Aperte o botão (HOME) para abrir o menu de ação -15. Selecione "SD format menu" -16. Aperte (A) para confirmar -17. Selecione "No EmuNAND" -18. Selecione "Auto" -19. Digite a combinação de botões solicitada para confirmar -20. Segure (R) e aperte (B) ao mesmo tempo para ejetar o cartão SD -21. Coloque o seu cartão SD no seu computador e, em seguida, copie todos os arquivos de volta para ele +9. Apague `NANDmin_emu.bin` da pasta `/files9/` do cartão SD depois de copiá-lo +10. **Faça backup de todos os arquivos no seu cartão SD para uma pasta no seu computador; todos os arquivos serão apagados na próxima etapa** +11. Reinsira o cartão SD no seu 3DS +12. Aperte (Start) para reiniciar segurando (Cima) para abrir o GodMode9 +13. Aperte o botão (HOME) para abrir o menu de ação +14. Selecione "SD format menu" +15. Aperte (A) para confirmar +16. Selecione "No EmuNAND" +17. Selecione "Auto" +18. Digite a combinação de botões solicitada para confirmar +19. Segure (R) e aperte (B) ao mesmo tempo para ejetar o cartão SD +20. Coloque o seu cartão SD no seu computador e, em seguida, copie todos os arquivos de volta para ele + Certifique-se de substituir o arquivo `arm9loaderhax.bin` no cartão SD por o do seu backup -22. Reinsira o cartão SD no seu 3DS -23. Aperte (A) para remontar seu cartão SD -24. Aperte (Start) para reiniciar! -25. Se você ver uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_down) +21. Reinsira o cartão SD no seu 3DS +22. Aperte (A) para remontar seu cartão SD +23. Aperte (Start) para reiniciar! +24. Se você ver uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_down) Voltar para [Instalando arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/pt_BR/Region-Changing.txt b/_pages/pt_BR/Region-Changing.txt index 41b83329b0..38f622f4ea 100644 --- a/_pages/pt_BR/Region-Changing.txt +++ b/_pages/pt_BR/Region-Changing.txt @@ -45,7 +45,7 @@ Mudar de região usando ctrtransfer (que é usado nesse método) parece fazer co ##### Seção I - Trabalho Preparatório -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card +1. Copie `GodMode9.bin` do `.zip` do GodMode9 para a pasta `/luma/payloads/` do seu cartão SD 2. Copie `Decrypt9WIP.bin` para a pasta `/luma/payloads/` no seu cartão SD e renomeie `Decrypt9WIP.bin` para `x_Decrypt9WIP.bin` 3. Copie os aquivos `.bin` e `.bin.sha` da imagem do ctrtransfer 9.2.0 do ctrtransfer`.zip` para a pasta `/files9/` do seu cartão SD 4. Reinsira o cartão SD no seu 3DS @@ -53,7 +53,7 @@ Mudar de região usando ctrtransfer (que é usado nesse método) parece fazer co ##### Seção II - Backup dos tickets e configurações salvas 1. Aperte (Start) e depois segure (X) para reiniciar no modo arm9loaderhax do Decrypt9 -2. Hover over Decrypt9WIP, then press (A) to launch it +2. Selecione Decrypt9WIP, e depois aperte (A) para iniciá-lo 3. Vá para "Ticket/Titlekey Options", depois selecione "Ticket Dump (SysNAND)" 4. Aperte (Select) para ejetar o seu cartão SD, depois coloque-o no seu computador 5. Apague todos os arquivos `.tik` da pasta `/files9/` que **não** começam com "00-" @@ -122,7 +122,7 @@ Mudar de região usando ctrtransfer (que é usado nesse método) parece fazer co ##### Seção VII - Restaurando as configurações salvas 1. Aperte (Start) e depois segure (X) para reiniciar no modo arm9loaderhax do Decrypt9 -2. Hover over Decrypt9WIP, then press (A) to launch it +2. Selecione Decrypt9WIP, e depois aperte (A) para iniciá-lo 2. Vá para "SysNAND Options", depois "System Save Inject", e selecione "Inject configsave.bin" Old 3DSs / 2DSs podem precisar ser formatados (usando TinyFormat ou a Configuração do Console) para jogar jogos com o modo de memória estendida (tais como Monster Hunter, Super Smash Bros, ou Pokémon Sun/Moon). diff --git a/_pages/pt_BR/Updating-A9LH.txt b/_pages/pt_BR/Updating-A9LH.txt index e2b670fa31..82f05fda4e 100644 --- a/_pages/pt_BR/Updating-A9LH.txt +++ b/_pages/pt_BR/Updating-A9LH.txt @@ -55,7 +55,7 @@ Estas etapas também atualizarão seus diversos payloads e o banco de dados de c 2. Aperte (Select) para atualizar o arm9loaderhax 3. Desligue o dispositivo e insira o cartão SD novamente em seu computador 4. Apague a pasta `a9lh` da raiz do seu cartão SD -5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` +5. Apague o arquivo `safea9lhinstaller.bin` de `/luma/payloads/` ##### Seção III - Configurando o Luma3DS diff --git a/_pages/pt_PT/Decrypt9-(Homebrew-Launcher).txt b/_pages/pt_PT/Decrypt9-(Homebrew-Launcher).txt index 48c1ca68a4..843e4a66b4 100644 --- a/_pages/pt_PT/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/pt_PT/Decrypt9-(Homebrew-Launcher).txt @@ -15,12 +15,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/pt_PT/Installing-arm9loaderhax.txt b/_pages/pt_PT/Installing-arm9loaderhax.txt index 70f6d0eb31..11e3ab96fb 100644 --- a/_pages/pt_PT/Installing-arm9loaderhax.txt +++ b/_pages/pt_PT/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/ro_RO/2.1.0-ctrtransfer.txt b/_pages/ro_RO/2.1.0-ctrtransfer.txt index 3ccc1e7672..5ec03fd59e 100644 --- a/_pages/ro_RO/2.1.0-ctrtransfer.txt +++ b/_pages/ro_RO/2.1.0-ctrtransfer.txt @@ -1,7 +1,7 @@ --- title: "2.1.0 ctrtransfer" # -lang: en -permalink: /2.1.0-ctrtransfer.html +lang: ro +permalink: /ro_RO/2.1.0-ctrtransfer.html --- Dacă faceți downgrade la 2.1.0 pe un 2DS sau New 3DS și ați lăsat Comunicațiile Wireless închise, le puteți reporni prin scoaterea bateriei pentru câteva secunde și apoi pornind din nou consola. diff --git a/_pages/ro_RO/Decrypt9-(Homebrew-Launcher).txt b/_pages/ro_RO/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..ab31c1e3e7 100644 --- a/_pages/ro_RO/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ro_RO/Decrypt9-(Homebrew-Launcher).txt @@ -1,31 +1,30 @@ --- -title: "Decrypt9 (Homebrew Launcher)" # -lang: en +title: "Decrypt9 (Lansatorul Homebrew)" # +lang: ro permalink: /decrypt9-(homebrew-launcher).html --- -#### What you need +#### De ce aveți nevoie -* The latest release of [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest/) -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [fasthax](https://github.com/nedwill/fasthax/releases/latest) +* Ultima versiune de [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest/) +* Ultima versiune de [safehax](https://github.com/TiniVi/safehax/releases/latest) +* Ultima versiune de [fasthax](https://github.com/nedwill/fasthax/releases/latest) -#### Instructions +#### Instrucțiuni -1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) -7. Launch fasthax from the list of homebrew - + You may have to scroll down to see this option -8. Once it has completed, press (Start) to exit back to the Homebrew Launcher - + This may take several tries -9. Launch safehax from the list of homebrew - + You may have to scroll down to see this option -10. If the exploit was successful, you will have booted into Decrypt9 +1. Scoatei cardul SD din dispozitivul dumneavoastră, lăsând-ul în Homebrew Launcher, apoi introduceți cardul SD în computer +2. Creați un folder numit `files9` pe rădăcina cardului SD dacă nu există deja +3. Copiați `safehax.3dsx` în folderul`/3ds/` de pe cardul SD +4. Copiați `fasthax.3dsx` în folderul `/3ds/` de pe cardul SD +5. Copiați `Decrypt9WIP.bin` din arhiva Decrypt9WIP `.zip` pe card și redenumiți `Decrypt9WIP.bin` în `safehaxpayload.bin` +6. Reintroduceți cardul SD în 3DS +7. Lansați fasthax din lista de homebrew + + Ar trebuii să derulați în jos pentru a vedea opțiunea +8. Odată ce s-a terminat, apăsați (Start) pentru a ieși înapoi în Homebrew Launcher + + Aceasta ar putea necesita mai multe încercări +9. Lansați safehax din lista de homebrew + + Ar trebuii să derulați în jos pentru a vedea opțiunea +10. Dacă exploatarea a avut loc cu succes, ar trebui să fiți în Decrypt9 acum -Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) +Continuati la [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ro_RO/Installing-arm9loaderhax.txt b/_pages/ro_RO/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/ro_RO/Installing-arm9loaderhax.txt +++ b/_pages/ro_RO/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/ru_RU/Decrypt9-(Homebrew-Launcher).txt b/_pages/ru_RU/Decrypt9-(Homebrew-Launcher).txt index 20ba617c9b..288d516f2a 100644 --- a/_pages/ru_RU/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ru_RU/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /ru_RU/decrypt9-(homebrew-launcher).html #### Инструкция 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Создайте папку `files9` в корне вашей SD-карты, если таковой нет -2. Скопируйте `safehax.3dsx` в папку `/3ds/` на SD-карте -3. Скопируйте `fasthax.3dsx` в папку `/3ds/` на SD-карте -4. Скопируйте `Decrypt9WIP.bin` из `.zip-архива` Decrypt9WIP в корень SD-карты и переименуйте `Decrypt9WIP.bin` в `safehaxpayload.bin` -5. Вставьте SD-карту в 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Создайте папку `files9` в корне вашей SD-карты, если таковой нет +3. Скопируйте `safehax.3dsx` в папку `/3ds/` на SD-карте +4. Скопируйте `fasthax.3dsx` в папку `/3ds/` на SD-карте +5. Скопируйте `Decrypt9WIP.bin` из `.zip-архива` Decrypt9WIP в корень SD-карты и переименуйте `Decrypt9WIP.bin` в `safehaxpayload.bin` +6. Вставьте SD-карту в 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/ru_RU/Installing-arm9loaderhax.txt b/_pages/ru_RU/Installing-arm9loaderhax.txt index 408b29b415..ddd2f46ec7 100644 --- a/_pages/ru_RU/Installing-arm9loaderhax.txt +++ b/_pages/ru_RU/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Перейдите в "SysNAND Backup/Restore" -4. Перейдите в "SysNAND Restore (keep a9lh)" и восстановите NAND из `NANDmin.bin` -5. Нажмите (Start) для перезагрузки +2. Перейдите в "SysNAND Backup/Restore" +3. Перейдите в "SysNAND Restore (keep a9lh)" и восстановите NAND из `NANDmin.bin` +4. Нажмите (Start) для перезагрузки + Если после запуска экран чёрный, выполняйте инструкции из раздела [9.2.0 ctrtransfer](9.2.0-ctrtransfer) -6. Если ваш бекап был сделан на прошивках от 3.0.0 до 4.5.0, консоль не запустится до тех пор, пока вы вручную не скачаете нужные файлы прошивки: +5. Если ваш бекап был сделан на прошивках от 3.0.0 до 4.5.0, консоль не запустится до тех пор, пока вы вручную не скачаете нужные файлы прошивки: + Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) и переименуйте его в `firmware.bin` + Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Скопируйте `firmware.bin` и `cetk` в папку `/luma/` на SD-карте + После обновления прошивки на 3DS удалите оба этих файла -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Обновление консоли с установленным A9LH + Luma (который стоит у вас) безопасно, прекратите переспрашивать + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Часть V - Интеграция FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Перейдите в "SysNAND Options", затем "Health&Safety Dump", чтобы сохранить оригинал приложения Информация о здоровье и безопасности (Health & Safety) в файл `hs.app` **(стрелками Вверх и Вниз / Влево и Вправо можно менять название файла)** -4. Нажмите (B), затем выберите "Health&Safety Inject" -5. Выберите файл с интегрированным FBI формата `.app` соответствующий вашему региону -6. Нажмите (A) для подтверждения -7. Нажмите (Start) для перезагрузки -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Перейдите в "SysNAND Options", затем "Health&Safety Dump", чтобы сохранить оригинал приложения Информация о здоровье и безопасности (Health & Safety) в файл `hs.app` **(стрелками Вверх и Вниз / Влево и Вправо можно менять название файла)** +3. Нажмите (B), затем выберите "Health&Safety Inject" +4. Выберите файл с интегрированным FBI формата `.app` соответствующий вашему региону +5. Нажмите (A) для подтверждения +6. Нажмите (Start) для перезагрузки +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/ru_RU/Move-EmuNAND.txt b/_pages/ru_RU/Move-EmuNAND.txt index 20066acc39..e205de98c6 100644 --- a/_pages/ru_RU/Move-EmuNAND.txt +++ b/_pages/ru_RU/Move-EmuNAND.txt @@ -23,30 +23,30 @@ permalink: /ru_RU/move-emunand.html 1. Скопируйте `GodMode9.bin` из `.zip-архива` GodMode9 в папку `/luma/payloads/` на SD-карте и переименуйте `GodMode9.bin` в `up_GodMode9.bin` 2. Вставьте SD-карту обратно в приставку 3. Запустите Hourglass9, зажав кнопку (Start) при включении консоли -5. Перейдите в "EmuNAND Backup/Restore", затем выберите "EmuNAND Backup", чтобы сделать резервную копию EmuNAND в файл `NANDmin_emu.bin` -6. Нажмите (B) для возврата в главное меню -7. Перейдите в "SysNAND Backup/Restore", затем выберите "SysNAND Restore (keep a9lh)", чтобы восстановить `NANDmin_emu.bin` в SysNAND -8. Нажмите (Select), чтобы извлечь SD-карту -9. Put your SD card in your computer, then copy `NANDmin_emu.bin` and `NANDmin_emu.bin.sha` from the `/files9/` folder on your SD card to a safe location +4. Перейдите в "EmuNAND Backup/Restore", затем выберите "EmuNAND Backup", чтобы сделать резервную копию EmuNAND в файл `NANDmin_emu.bin` +5. Нажмите (B) для возврата в главное меню +6. Перейдите в "SysNAND Backup/Restore", затем выберите "SysNAND Restore (keep a9lh)", чтобы восстановить `NANDmin_emu.bin` в SysNAND +7. Нажмите (Select), чтобы извлечь SD-карту +8. Put your SD card in your computer, then copy `NANDmin_emu.bin` and `NANDmin_emu.bin.sha` from the `/files9/` folder on your SD card to a safe location + Make backups in multiple locations + This backup will save you from a brick if anything goes wrong in the future + **Your backup should match one of the sizes on [this](nand-size) page; if it does not, you should delete it and make a new one!** -10. После копирования удалите `NANDmin_emu.bin` и `NANDmin_emu.bin.sha` из папки `/files9/` -11. **Backup every file on your SD card to a folder on your computer; all files will be deleted in the following steps** -12. Вставьте SD-карту обратно в приставку -13. Press (Start) to reboot while holding (Up) to open GodMode9 -14. Press the (Home) button to bring up the action menu -15. Выберите "SD format menu" -16. Нажмите (A) для подтверждения -17. Выберите "No EmuNAND" -18. Выберите "Auto" -19. Введите указанную последовательность кнопок для подтверждения -20. Удерживая (R) нажмите (B) для того, чтобы извлечь SD-карту -21. Put your SD card in your computer, then copy all your files back into it +9. После копирования удалите `NANDmin_emu.bin` и `NANDmin_emu.bin.sha` из папки `/files9/` +10. **Backup every file on your SD card to a folder on your computer; all files will be deleted in the following steps** +11. Вставьте SD-карту обратно в приставку +12. Press (Start) to reboot while holding (Up) to open GodMode9 +13. Press the (Home) button to bring up the action menu +14. Выберите "SD format menu" +15. Нажмите (A) для подтверждения +16. Выберите "No EmuNAND" +17. Выберите "Auto" +18. Введите указанную последовательность кнопок для подтверждения +19. Удерживая (R) нажмите (B) для того, чтобы извлечь SD-карту +20. Put your SD card in your computer, then copy all your files back into it + Ensure you replace the `arm9loaderhax.bin` file on the SD card with the one from your backup -22. Вставьте SD-карту обратно в приставку -23. Press (A) to remount your SD card -24. Нажмите (Start) для перезагрузки! -25. + Если после включения экран остаётся чёрным, перейдите к разделу с [проблемами и их решениями](troubleshooting#ts_sys_down) +21. Вставьте SD-карту обратно в приставку +22. Press (A) to remount your SD card +23. Нажмите (Start) для перезагрузки! +24. + Если после включения экран остаётся чёрным, перейдите к разделу с [проблемами и их решениями](troubleshooting#ts_sys_down) Вернитесь в раздел [Установка arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/sr_SP/Decrypt9-(Homebrew-Launcher).txt b/_pages/sr_SP/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/sr_SP/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/sr_SP/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/sr_SP/Hardmod-Downgrade.txt b/_pages/sr_SP/Hardmod-Downgrade.txt index 4d91fbfbda..b954882031 100644 --- a/_pages/sr_SP/Hardmod-Downgrade.txt +++ b/_pages/sr_SP/Hardmod-Downgrade.txt @@ -45,7 +45,7 @@ This will work on New 3DS, Old 3DS, and 2DS. 1. Copy and merge the `3ds` folder from the 3DSident `.zip` to your device's SD card 2. Reinsert your SD card into your 3DS -3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the homebrew launcher on the device +3. Use [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) to launch the Homebrew Launcher on the device 4. Launch 3DSident 5. Verify that the following: + **Kernel version**: 2.50-11 diff --git a/_pages/sr_SP/Homebrew-Launcher-(Soundhax).txt b/_pages/sr_SP/Homebrew-Launcher-(Soundhax).txt index ce7cbdb3f1..b092e11eab 100644 --- a/_pages/sr_SP/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/sr_SP/Homebrew-Launcher-(Soundhax).txt @@ -26,7 +26,9 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, 6. Go through all of the bird tips, then close the app normally and reopen it + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 7. Play the SoundHax `.m4a` -8. Your console should load the homebrew menu + + This may take several tries + + If it freezes, just force the console to power off by holding the power button, then try again +8. Your console should load the Homebrew Launcher Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/sr_SP/Installing-arm9loaderhax.txt b/_pages/sr_SP/Installing-arm9loaderhax.txt index a7ba223d86..a1323ccb66 100644 --- a/_pages/sr_SP/Installing-arm9loaderhax.txt +++ b/_pages/sr_SP/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ In this section, we will go through the process that all the other steps have le This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install. -The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads by holding buttons on boot. +The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. @@ -31,7 +31,7 @@ Once arm9loaderhax is installed and Luma3DS is setup with the correct options, w During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* -+ **Luma3DS Updater** *(updates our CFW installation easily)* ++ **Luma3DS Updater** *(updates your CFW installation easily)* + **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)* #### What you need @@ -47,7 +47,6 @@ During this process, we also setup programs such as the following: * The latest release of [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) * The latest release of [DspDump](https://github.com/Cruel/DspDump/releases/latest) * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) #### Instructions @@ -66,22 +65,16 @@ During this process, we also setup programs such as the following: 1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system** 2. Create a folder named `cias` on the root of your SD card if it does not already exist -3. **Delete the `a9lh` folder from the root of your SD card if it exists** - + **If you accidentally install arm9loaderhax using another device's `otp.bin`, you will BRICK!** -4. Delete the `3ds` folder from the root of your SD card if it exists -5. **Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card** - + This will include a brand new `3ds` folder to replace the one you just deleted 6. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card -7. **Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card** -8. **Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card** +7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card +8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card 9. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card 10. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card 11. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card -12. **Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files** +12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files 13. Create a folder named `luma` on the root of your SD card 14. Create a folder named `payloads` in the `luma` folder on your SD card 15. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` -16. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` to `up_GodMode9.bin` 17. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card 18. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card 19. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card @@ -95,7 +88,7 @@ During this process, we also setup programs such as the following: + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser) + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen) - + If your wifi switch is off, unplug the 3DS and remove the battery for several seconds to enable wifi + + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + Press (Select) to Full Install + The installer will now install arm9loaderhax on your device (this is very fast) + Shut down your console by pressing any button @@ -103,7 +96,7 @@ During this process, we also setup programs such as the following: ##### Section III - Configuring Luma3DS -1. Hold (Select) on boot to enter the Luma3DS menu +1. Boot your device while holding (Select) to enter the Luma3DS configuration menu + Make sure to start holding the button before pressing power + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_a9lh) + If you boot to SafeA9LHInstaller, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh) @@ -111,7 +104,7 @@ During this process, we also setup programs such as the following: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you should *also* enable the following: +3. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again @@ -124,7 +117,7 @@ During this process, we also setup programs such as the following: If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section. {: .notice--info} -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore" 3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` 4. Press (Start) to reboot @@ -134,16 +127,15 @@ If, before following this guide, you already had an EmuNAND setup and would like + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -2. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) - ##### Section V - Injecting FBI -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** 3. Press (B), then select the "Health&Safety Inject" option 4. Select the FBI injectable `.app` for your region @@ -169,19 +161,19 @@ If, before following this guide, you already had an EmuNAND setup and would like 14. Launch the Homebrew Launcher from the home menu 15. Select "DSP Dump" 16. Press (Start) when prompted to exit -17. Reboot while holding (Start) to launch Hourglass9 -18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -20. Press (Select) on the main menu to eject your SD card -21. Press (Start) to reboot with the SD card removed +17. Boot your device while holding (Start) to enter Hourglass9 +19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +21. Press (Select) on the main menu to eject your SD card +22. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation -22. Use the (A) button and the D-Pad to turn on the following: +23. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -23. If you are using a **New 3DS**, you should *also* enable the following: +24. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -24. Reinsert your SD card, then press (Start) to save and reboot! +25. Reinsert your SD card, then press (Start) to save and reboot! ___ @@ -191,7 +183,7 @@ If DSi / DS functionality has broken (such as DS carts or DSiWare no longer work {% capture notice-10 %} You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. -This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use whatever version you placed in CTR NAND. +This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use the version you placed in CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
@@ -199,7 +191,7 @@ This will only update the Luma3DS files on the SD Card. If you boot the device w {% capture notice-6 %} You will now boot a Custom Firmware based SysNAND by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. -You can now hold (Start) on boot to launch Hourglass9, an arm9loaderhax safe multipurpose NAND and cartridge tool. +You can now hold (Start) on boot to launch Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/sr_SP/Region-Changing.txt b/_pages/sr_SP/Region-Changing.txt index 7097015a28..3fe40b9841 100644 --- a/_pages/sr_SP/Region-Changing.txt +++ b/_pages/sr_SP/Region-Changing.txt @@ -40,11 +40,12 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot #### Instructions -**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +{: .notice--info} ##### Section I - Prep work -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` +1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 2. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin` 3. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card 4. Reinsert your SD card into your 3DS @@ -52,12 +53,13 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section II - Backup tickets and config save 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 -2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" -3. Press (Select) to eject your SD card, then put it in your computer -4. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" -5. Leave all the `.tik` files that do start with "00-" in the folder -6. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu -7. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" +2. Hover over Decrypt9WIP, then press (A) to launch it +3. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" +4. Press (Select) to eject your SD card, then put it in your computer +5. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" +6. Leave all the `.tik` files that do start with "00-" in the folder +7. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu +8. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" ##### Section III - ctrtransfer @@ -75,7 +77,7 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section IV - Editing SecureInfo -1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 +1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 2. Navigate to `SYSNAND CTRNAND` -> `rw` -> `sys` 3. Press (Y) on `SecureInfo_A` to copy it 4. Press (Y) to paste a copy of `SecureInfo_A` @@ -119,7 +121,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section VII - Restore config save -1. Reboot holding (X) during boot to launch arm9loaderhax Decrypt9 +1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 +2. Hover over Decrypt9WIP, then press (A) to launch it 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). diff --git a/_pages/sr_SP/Site-Navigation.txt b/_pages/sr_SP/Site-Navigation.txt index f18f1900da..110e6d3705 100644 --- a/_pages/sr_SP/Site-Navigation.txt +++ b/_pages/sr_SP/Site-Navigation.txt @@ -7,20 +7,18 @@ sitemap: false --- {% capture notice-1 %} - **Popular** + + [Installing arm9loaderhax](installing-arm9loaderhax) + [NFIRM Downgrade](nfirm-downgrade) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) + [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) - {% endcapture %} -
{{ notice-1 | markdownify }}
{% capture notice-2 %} - **All** + + [2.1.0 ctrtransfer](2.1.0-ctrtransfer) + [9.2.0 ctrtransfer](9.2.0-ctrtransfer) + [Cart Update](cart-update) @@ -48,7 +46,5 @@ sitemap: false + [Troubleshooting](troubleshooting) + [Updating A9LH](updating-a9lh) + [Why Ads?](why-ads) - {% endcapture %} -
{{ notice-2 | markdownify }}
\ No newline at end of file diff --git a/_pages/sr_SP/Updating-A9LH.txt b/_pages/sr_SP/Updating-A9LH.txt index 2e9499fc3c..430678e379 100644 --- a/_pages/sr_SP/Updating-A9LH.txt +++ b/_pages/sr_SP/Updating-A9LH.txt @@ -27,7 +27,7 @@ These steps will also update your various payloads and the AES key database. #### What you need * [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * The latest release of [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(the `.7z` file)* * The latest release of [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(the `.7z` file)* * The latest release of [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) @@ -44,18 +44,18 @@ These steps will also update your various payloads and the AES key database. 4. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` 5. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card 6. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin` -7. Copy the `a9lh` folder from `data_input_v4.zip` to the root of your SD Card +7. Copy the `a9lh` folder from data_input `.zip` to the root of your SD Card 8. Copy _the contents of_ the arm9loaderhax `.7z` to `a9lh` folder on your SD card 9. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card, overwrite existing files 10. Reinsert your SD card into your 3DS ##### Section II - Payload update -1. Boot the device while holding D-Pad down +1. Reinsert your SD card into your 3DS and boot holding (Select) 2. Press (Select) to update arm9loaderhax 3. Power off the device and put your SD card back in your computer 4. Delete the `a9lh` folder from the root of your SD card -5. Delete `down_safea9lhinstaller.bin` from `/luma/payloads/` +5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` ##### Section III - Configuring Luma3DS diff --git a/_pages/sv_SE/2.1.0-ctrtransfer.txt b/_pages/sv_SE/2.1.0-ctrtransfer.txt index 094d8fe4ca..8efefa26e1 100644 --- a/_pages/sv_SE/2.1.0-ctrtransfer.txt +++ b/_pages/sv_SE/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /2.1.0-ctrtransfer.html If you downgrade to 2.1.0 on a 2DS or New 3DS and left Wireless Communication off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up. {: .notice--info} -If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0, make sure to have a microSD card reader on hand before proceeding. +If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. {: .notice--info} Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide. diff --git a/_pages/sv_SE/Decrypt9-(Homebrew-Launcher).txt b/_pages/sv_SE/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/sv_SE/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/sv_SE/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/sv_SE/Installing-arm9loaderhax.txt b/_pages/sv_SE/Installing-arm9loaderhax.txt index a7ba223d86..a1323ccb66 100644 --- a/_pages/sv_SE/Installing-arm9loaderhax.txt +++ b/_pages/sv_SE/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ In this section, we will go through the process that all the other steps have le This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install. -The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads by holding buttons on boot. +The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. @@ -31,7 +31,7 @@ Once arm9loaderhax is installed and Luma3DS is setup with the correct options, w During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* -+ **Luma3DS Updater** *(updates our CFW installation easily)* ++ **Luma3DS Updater** *(updates your CFW installation easily)* + **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)* #### What you need @@ -47,7 +47,6 @@ During this process, we also setup programs such as the following: * The latest release of [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) * The latest release of [DspDump](https://github.com/Cruel/DspDump/releases/latest) * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) #### Instructions @@ -66,22 +65,16 @@ During this process, we also setup programs such as the following: 1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system** 2. Create a folder named `cias` on the root of your SD card if it does not already exist -3. **Delete the `a9lh` folder from the root of your SD card if it exists** - + **If you accidentally install arm9loaderhax using another device's `otp.bin`, you will BRICK!** -4. Delete the `3ds` folder from the root of your SD card if it exists -5. **Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card** - + This will include a brand new `3ds` folder to replace the one you just deleted 6. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card -7. **Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card** -8. **Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card** +7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card +8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card 9. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card 10. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card 11. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card -12. **Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files** +12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files 13. Create a folder named `luma` on the root of your SD card 14. Create a folder named `payloads` in the `luma` folder on your SD card 15. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` -16. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` to `up_GodMode9.bin` 17. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card 18. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card 19. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card @@ -95,7 +88,7 @@ During this process, we also setup programs such as the following: + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser) + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen) - + If your wifi switch is off, unplug the 3DS and remove the battery for several seconds to enable wifi + + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + Press (Select) to Full Install + The installer will now install arm9loaderhax on your device (this is very fast) + Shut down your console by pressing any button @@ -103,7 +96,7 @@ During this process, we also setup programs such as the following: ##### Section III - Configuring Luma3DS -1. Hold (Select) on boot to enter the Luma3DS menu +1. Boot your device while holding (Select) to enter the Luma3DS configuration menu + Make sure to start holding the button before pressing power + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_a9lh) + If you boot to SafeA9LHInstaller, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh) @@ -111,7 +104,7 @@ During this process, we also setup programs such as the following: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you should *also* enable the following: +3. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again @@ -124,7 +117,7 @@ During this process, we also setup programs such as the following: If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section. {: .notice--info} -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore" 3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` 4. Press (Start) to reboot @@ -134,16 +127,15 @@ If, before following this guide, you already had an EmuNAND setup and would like + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -2. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) - ##### Section V - Injecting FBI -1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot +1. Boot your device while holding (Start) to enter Hourglass9 2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** 3. Press (B), then select the "Health&Safety Inject" option 4. Select the FBI injectable `.app` for your region @@ -169,19 +161,19 @@ If, before following this guide, you already had an EmuNAND setup and would like 14. Launch the Homebrew Launcher from the home menu 15. Select "DSP Dump" 16. Press (Start) when prompted to exit -17. Reboot while holding (Start) to launch Hourglass9 -18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -20. Press (Select) on the main menu to eject your SD card -21. Press (Start) to reboot with the SD card removed +17. Boot your device while holding (Start) to enter Hourglass9 +19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +21. Press (Select) on the main menu to eject your SD card +22. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation -22. Use the (A) button and the D-Pad to turn on the following: +23. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -23. If you are using a **New 3DS**, you should *also* enable the following: +24. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -24. Reinsert your SD card, then press (Start) to save and reboot! +25. Reinsert your SD card, then press (Start) to save and reboot! ___ @@ -191,7 +183,7 @@ If DSi / DS functionality has broken (such as DS carts or DSiWare no longer work {% capture notice-10 %} You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. -This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use whatever version you placed in CTR NAND. +This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use the version you placed in CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
@@ -199,7 +191,7 @@ This will only update the Luma3DS files on the SD Card. If you boot the device w {% capture notice-6 %} You will now boot a Custom Firmware based SysNAND by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. -You can now hold (Start) on boot to launch Hourglass9, an arm9loaderhax safe multipurpose NAND and cartridge tool. +You can now hold (Start) on boot to launch Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/sv_SE/Region-Changing.txt b/_pages/sv_SE/Region-Changing.txt index 7097015a28..3fe40b9841 100644 --- a/_pages/sv_SE/Region-Changing.txt +++ b/_pages/sv_SE/Region-Changing.txt @@ -40,11 +40,12 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot #### Instructions -**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +{: .notice--info} ##### Section I - Prep work -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` +1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 2. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin` 3. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card 4. Reinsert your SD card into your 3DS @@ -52,12 +53,13 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section II - Backup tickets and config save 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 -2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" -3. Press (Select) to eject your SD card, then put it in your computer -4. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" -5. Leave all the `.tik` files that do start with "00-" in the folder -6. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu -7. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" +2. Hover over Decrypt9WIP, then press (A) to launch it +3. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" +4. Press (Select) to eject your SD card, then put it in your computer +5. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" +6. Leave all the `.tik` files that do start with "00-" in the folder +7. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu +8. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" ##### Section III - ctrtransfer @@ -75,7 +77,7 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section IV - Editing SecureInfo -1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 +1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 2. Navigate to `SYSNAND CTRNAND` -> `rw` -> `sys` 3. Press (Y) on `SecureInfo_A` to copy it 4. Press (Y) to paste a copy of `SecureInfo_A` @@ -119,7 +121,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot ##### Section VII - Restore config save -1. Reboot holding (X) during boot to launch arm9loaderhax Decrypt9 +1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 +2. Hover over Decrypt9WIP, then press (A) to launch it 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). diff --git a/_pages/sv_SE/Site-Navigation.txt b/_pages/sv_SE/Site-Navigation.txt index f18f1900da..110e6d3705 100644 --- a/_pages/sv_SE/Site-Navigation.txt +++ b/_pages/sv_SE/Site-Navigation.txt @@ -7,20 +7,18 @@ sitemap: false --- {% capture notice-1 %} - **Popular** + + [Installing arm9loaderhax](installing-arm9loaderhax) + [NFIRM Downgrade](nfirm-downgrade) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) + [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) - {% endcapture %} -
{{ notice-1 | markdownify }}
{% capture notice-2 %} - **All** + + [2.1.0 ctrtransfer](2.1.0-ctrtransfer) + [9.2.0 ctrtransfer](9.2.0-ctrtransfer) + [Cart Update](cart-update) @@ -48,7 +46,5 @@ sitemap: false + [Troubleshooting](troubleshooting) + [Updating A9LH](updating-a9lh) + [Why Ads?](why-ads) - {% endcapture %} -
{{ notice-2 | markdownify }}
\ No newline at end of file diff --git a/_pages/tr_TR/2.1.0-ctrtransfer.txt b/_pages/tr_TR/2.1.0-ctrtransfer.txt index 094d8fe4ca..8efefa26e1 100644 --- a/_pages/tr_TR/2.1.0-ctrtransfer.txt +++ b/_pages/tr_TR/2.1.0-ctrtransfer.txt @@ -7,7 +7,7 @@ permalink: /2.1.0-ctrtransfer.html If you downgrade to 2.1.0 on a 2DS or New 3DS and left Wireless Communication off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up. {: .notice--info} -If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0, make sure to have a microSD card reader on hand before proceeding. +If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. {: .notice--info} Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide. diff --git a/_pages/tr_TR/Decrypt9-(Homebrew-Launcher).txt b/_pages/tr_TR/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/tr_TR/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/tr_TR/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/tr_TR/Installing-arm9loaderhax.txt b/_pages/tr_TR/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/tr_TR/Installing-arm9loaderhax.txt +++ b/_pages/tr_TR/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/uk_UA/Decrypt9-(Homebrew-Launcher).txt b/_pages/uk_UA/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/uk_UA/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/uk_UA/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/uk_UA/Installing-arm9loaderhax.txt b/_pages/uk_UA/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/uk_UA/Installing-arm9loaderhax.txt +++ b/_pages/uk_UA/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/vi_VN/Decrypt9-(Homebrew-Launcher).txt b/_pages/vi_VN/Decrypt9-(Homebrew-Launcher).txt index d390e42f23..0a396fe5a6 100644 --- a/_pages/vi_VN/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/vi_VN/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/vi_VN/Installing-arm9loaderhax.txt b/_pages/vi_VN/Installing-arm9loaderhax.txt index 7a6454a3cf..91eb0880d0 100644 --- a/_pages/vi_VN/Installing-arm9loaderhax.txt +++ b/_pages/vi_VN/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/zh_CN/Decrypt9-(Homebrew-Launcher).txt b/_pages/zh_CN/Decrypt9-(Homebrew-Launcher).txt index 6d1ece6f3a..79a4b2098c 100644 --- a/_pages/zh_CN/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/zh_CN/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /zh_CN/decrypt9-(homebrew-launcher).html #### 操作指南 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. 在SD卡的根目录下创建一个名为'files9'的文件夹 -2. 将 `safehax.3dsx` 复制到SD卡上的 `/3ds/` 文件夹 -3. 将 `fasthax.3dsx` 复制到SD卡上的 `/3ds/` 文件夹 -4. 将Decrypt9WIP `.zip` 里的`Decrypt9WIP.bin` 复制到SD卡的根目录下，并重命名为 `safehaxpayload.bin` -5. 将SD卡插回3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. 在SD卡的根目录下创建一个名为'files9'的文件夹 +3. 将 `safehax.3dsx` 复制到SD卡上的 `/3ds/` 文件夹 +4. 将 `fasthax.3dsx` 复制到SD卡上的 `/3ds/` 文件夹 +5. 将Decrypt9WIP `.zip` 里的`Decrypt9WIP.bin` 复制到SD卡的根目录下，并重命名为 `safehaxpayload.bin` +6. 将SD卡插回3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/zh_CN/Installing-arm9loaderhax.txt b/_pages/zh_CN/Installing-arm9loaderhax.txt index 89aeb7063d..60b494c4c2 100644 --- a/_pages/zh_CN/Installing-arm9loaderhax.txt +++ b/_pages/zh_CN/Installing-arm9loaderhax.txt @@ -22,7 +22,7 @@ permalink: /zh_CN/installing-arm9loaderhax.html 这几乎是所有设备破解中最好的一种，因为它能被永久安装到NAND固件分区中，并在大多数系统文件启动前运行，使得它不仅可以在任何版本上生效，而且能保护其自身，并可以从大多数使非A9LH破解的3DS变砖的情况恢复，如损坏的桌面菜单（home menu）或者安装了一个错误的title（条目，如系统文件、游戏、软件等等）。 -在加载完NAND之后，会启动`arm9loaderhax.bin`文件，它可以是任何有效的arm9 payload。 This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. +在加载完NAND之后，会启动`arm9loaderhax.bin`文件，它可以是任何有效的arm9 payload。 你可以随时替换该文件，尽管Luma3DS允许在启动时按下按键来启动对应的arm9 payloads。 本教程中，我们使用[AuroraWright](https://github.com/AuroraWright/)提供的Luma3DS来直接启动一个破解过的SysNAND，使我们能完全避免使用RedNAND，从而极大地简化使用破解的3DS系统的步骤，并节省SD卡的空间。 @@ -66,12 +66,12 @@ permalink: /zh_CN/installing-arm9loaderhax.html 1. **如果SD卡上有 `/files9/` 文件夹，请将此文件夹复制到电脑上，并在多出备份 （例如网盘等）；文件夹里含有系统备份，可以在系崩溃时用来恢复数据** 2. 在SD卡的根目录下创建 `cias` 文件夹，如果已有此文件夹，则不用创建 6. 解压`SafeA9LHInstaller.7z`，并复制解压后的文件到你SD卡的根目录 -7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card -8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card +7. 从data_input压缩包中解压并复制`a9lh`文件夹到SD卡的根目录 +8. 解压arm9loaderhax的压缩包，并复制其中的内容到你SD卡下的`a9lh`文件夹中 9. 解压hblauncher_loader压缩包，并复制 `hblauncher_loader.cia` 到你SD卡的 `/cias/` 目录 10. 解压Luma3DS Updater压缩包，并复制 `lumaupdater.cia` 到你SD卡 `/cias/` 目录 11. 解压FBI压缩包，并复制 `FBI.cia` 到你SD卡的 `/cias/` 目录 -12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files +12. 解压`Luma3DS.zip`压缩包，复制`arm9loaderhax.bin`文件到SD卡根目录下，覆盖已有文件 13. 在你SD卡的根目录创建一个叫 `luma` 的文件夹 14. 在SD卡的 `luma` 文件夹里创建 `payloads` 文件夹 15. 将Hourglass9压缩包的 `Hourglass9.bin` 复制到你SD卡的 `/luma/payloads/` 目录下，并重命名 `Hourglass9.bin` 为 `start_Hourglass9.bin` @@ -88,7 +88,7 @@ permalink: /zh_CN/installing-arm9loaderhax.html + 如果出现错误：“当前服务在你的区域不可用”，请使用系统设置修改你的设备所在的国家，匹配你安装的2.1.0 ctr转移镜像所对应的NAND区域 + 如果出现错误，[参见这个问题排查](troubleshooting#ts_browser) + 如果出现花屏，[参见这个问题排查](troubleshooting#ts_safe_a9lh_screen) - + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + + 如果你的设备是新3DS或者2DS，在降级到了2.1.0系统时无线连接没有开启，你可以将充电器断开并将电池拿下来，等待数秒后再开机，即可重新开启无线连接。 + 按（Select）选择Full Install + 安装程序将在你的设备上安装arm9loaderhax（速度很快） +按任意按钮关机 @@ -104,7 +104,7 @@ permalink: /zh_CN/installing-arm9loaderhax.html + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you can *also* enable the following: +3. 如果你的设备是**新3DS**，你还应该启用如下设置： + **“New 3DS CPU”选项，请移动光标到”Clock+L2(x)”** + 这将提升许多游戏的帧率，但可能会造成某些游戏的不稳定 + 如果有部分游戏不能正常运行，关闭这个选项并重试 @@ -118,16 +118,16 @@ permalink: /zh_CN/installing-arm9loaderhax.html {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. 选择 “SysNAND Backup/Restore” -4. 选择 “SysNAND Restore (keep a9lh)”，从 `NANDmin.bin` 文件中恢复原系统的备份文件 -5. 按(Start)键重启 +2. 选择 “SysNAND Backup/Restore” +3. 选择 “SysNAND Restore (keep a9lh)”，从 `NANDmin.bin` 文件中恢复原系统的备份文件 +4. 按(Start)键重启 + 如果出现黑屏，参见[9.2.0 ctr转移](9.2.0-ctrtransfer) -6. 如果你的备份文件系统版本在3.0.0到4.5.0，除非你下载所需的固件，否则你的设备将无法开机： +5. 如果你的备份文件系统版本在3.0.0到4.5.0，除非你下载所需的固件，否则你的设备将无法开机： + 下载[这个文件](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) 并重命名为 `firmware.bin` + 下载[这个文件](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + 复制 `firmware.bin` 和 `cetk` 到SD卡的 `/luma/` 文件夹下 + 在你的3DS升级完成后，删除这两个文件 -7. 进入”System Settings”（系统设置）、”Other Settings”（其它设置），移动到最右边一页，选择”System Update”（系统升级），将你的3DS系统升级到最新版本 +6. 进入”System Settings”（系统设置）、”Other Settings”（其它设置），移动到最右边一页，选择”System Update”（系统升级），将你的3DS系统升级到最新版本 + 使用A9LH + Luma（或者其它自制系统）进行系统升级很安全，请不要再问这个问题。 + 之前关于新3DS不能在2.1.0系统版本下进行升级的警告不适用于恢复了你的NAND备份之后（译者注：因为已经不是2.1.0系统了） + 如果出现错误，将你的DNS设置改为”auto”（自动）模式 @@ -136,12 +136,12 @@ permalink: /zh_CN/installing-arm9loaderhax.html ##### 第五部分 - 注入FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. 选择 “SysNAND Backup/Restore”，然后选择”Health&Safety Dump”，导出Health & Safety（健康与安全）应用到`hs.app` **(你可以按十字键上下/左右来改名字)** -4. 按(B)键，选择”Health&Safety Inject” -5. 依照你的区域，选择可以注入的FBI.app文件 -6. 按(A)键确认，进行注入 -7. 按(Start)键重启 -8. 如果你依然进入的是系统内置的Health & Safety应用，并且之前曾经用Gateway进行过降级，参见这个[问题排查](troubleshooting#gw_fbi) +2. 选择 “SysNAND Backup/Restore”，然后选择”Health&Safety Dump”，导出Health & Safety（健康与安全）应用到`hs.app` **(你可以按十字键上下/左右来改名字)** +3. 按(B)键，选择”Health&Safety Inject” +4. 依照你的区域，选择可以注入的FBI.app文件 +5. 按(A)键确认，进行注入 +6. 按(Start)键重启 +7. 如果你依然进入的是系统内置的Health & Safety应用，并且之前曾经用Gateway进行过降级，参见这个[问题排查](troubleshooting#gw_fbi) ##### 第六部分 - 最终设置 @@ -169,7 +169,7 @@ permalink: /zh_CN/installing-arm9loaderhax.html + 在没有SD卡的情况下至少开启一次你的机器，可以使你配置基于CTRNAND的luma 23. 使用方向键和A键来启用以下设置： + **"Show NAND or user string in System Settings"** -24. If you are using a **New 3DS**, you can *also* enable the following: +24. 如果你的设备是**新3DS**，你还应该启用如下设置： + **“New 3DS CPU”选项，请移动光标到”Clock+L2(x)”** + 这将提升许多游戏的帧率，但可能会造成某些游戏的不稳定 + 如果有部分游戏不能正常运行，关闭这个选项并重试 diff --git a/_pages/zh_CN/Move-EmuNAND.txt b/_pages/zh_CN/Move-EmuNAND.txt index 0f68e07f53..f76fccd6ae 100644 --- a/_pages/zh_CN/Move-EmuNAND.txt +++ b/_pages/zh_CN/Move-EmuNAND.txt @@ -23,30 +23,30 @@ permalink: /zh_CN/move-emunand.html 1. 解压GodMode9压缩包，复制`GodMode9.bin`到你SD卡的`/luma/payloads/`目录下，并重命名`GodMode9.bin`为`up_GodMode9.bin` 2. 将SD卡插回你的3DS 3. 按住(Start)键开机，进入Hourglass9 -5. 进入”EmuNAND Backup/Restore”，选择”EmuNAND Backup”，将你的EmuNAND备份到`NANDmin_emu.bin` -6. 按(B)键返回到主菜单 -7. 进入”SysNAND Backup/Restore”，选择”SysNAND Restore (keep a9lh)”，从`NANDmin_emu.bin`文件恢复EmuNAND -8. 按(Select)键弹出你的SD卡 -9. 将SD卡插入电脑，复制`/files9/`文件夹下的`NANDmin_emu.bin`和`NANDmin_emu.bin.sha`文件到一个安全的位置 +4. 进入”EmuNAND Backup/Restore”，选择”EmuNAND Backup”，将你的EmuNAND备份到`NANDmin_emu.bin` +5. 按(B)键返回到主菜单 +6. 进入”SysNAND Backup/Restore”，选择”SysNAND Restore (keep a9lh)”，从`NANDmin_emu.bin`文件恢复EmuNAND +7. 按(Select)键弹出你的SD卡 +8. 将SD卡插入电脑，复制`/files9/`文件夹下的`NANDmin_emu.bin`和`NANDmin_emu.bin.sha`文件到一个安全的位置 + 在多个位置进行备份 + 备份文件可以在将来出现错误时将你的机器救砖 + **你的备份文件应该符合[这个](nand-size)页面上列出的大小。如果不是，你应该删除它并重新做一次！** -10. 删除`/files9/`文件夹下的`NANDmin_emu.bin`文件 -11. **备份你SD卡上的所有文件到你的计算机上。SD卡上的所有文件在接下来将被删除** -12. 将SD卡插回你的3DS -13. 按住(方向上)键开机，重启进入GodMode9 -14. 按(Home)键，打开行动菜单 -15. 选择”SD format menu” -16. 按(A)键确定 -17. 选择”No EmuNAND” -18. 选择”Auto” -19. 输入屏幕提示的组合键以确定 -20. 格式化完成后，同时按(R)键和(B)键，弹出你的SD卡 -21. 将SD卡插入电脑，然后将所有文件重新复制回SD卡 +9. 删除`/files9/`文件夹下的`NANDmin_emu.bin`文件 +10. **备份你SD卡上的所有文件到你的计算机上。SD卡上的所有文件在接下来将被删除** +11. 将SD卡插回你的3DS +12. 按住(方向上)键开机，重启进入GodMode9 +13. 按(Home)键，打开行动菜单 +14. 选择”SD format menu” +15. 按(A)键确定 +16. 选择”No EmuNAND” +17. 选择”Auto” +18. 输入屏幕提示的组合键以确定 +19. 格式化完成后，同时按(R)键和(B)键，弹出你的SD卡 +20. 将SD卡插入电脑，然后将所有文件重新复制回SD卡 + 确保你使用备份的` arm9loaderhax.bin `文件替换了SD卡上已有的文件 -22. 将SD卡插回你的3DS -23. 按(A)键重新加载你的SD卡 -24. 按(Start)键重启 -25. 如果出现黑屏，参见这个[问题排查](troubleshooting#ts_sys_down) +21. 将SD卡插回你的3DS +22. 按(A)键重新加载你的SD卡 +23. 按(Start)键重启 +24. 如果出现黑屏，参见这个[问题排查](troubleshooting#ts_sys_down) 返回到[安装arm9loaderhax](installing-arm9loaderhax)继续操作。 \ No newline at end of file diff --git a/_pages/zh_CN/Updating-A9LH.txt b/_pages/zh_CN/Updating-A9LH.txt index 8068d8c1f9..014b3f7e0e 100644 --- a/_pages/zh_CN/Updating-A9LH.txt +++ b/_pages/zh_CN/Updating-A9LH.txt @@ -44,7 +44,7 @@ data_input的版本是指为了适配不同安装程序版本而修改的.zip压 4. 将`Hourglass9 zip`下的`Hourglass9.bin`解压到SD卡 `/luma/payloads/` 目录下，并把 `Hourglass9.bin` 重命名为 `start_Hourglass9.bin` 5. 将`SafeA9LHInstaller.zip`中的 `arm9loaderhax.bin` 解压到SD卡 `/luma/payloads/` 目录下 6. 将 `/luma/payloads/` 目录下的 `arm9loaderhax.bin` 重命名成 `down_safea9lhinstaller.bin` -7. Copy the `a9lh` folder from data_input `.zip` to the root of your SD Card +7. 从data_input压缩包中解压并复制`a9lh`文件夹到SD卡的根目录 8. 解压arm9loaderhax压缩包，并复制解压的文件到SD卡的 `a9lh` 目录下 9. 解压`Luma3DS.zip`压缩包，复制`arm9loaderhax.bin`文件到SD卡根目录下，覆盖已有文件 10. 将你的SD卡插回3DS @@ -55,7 +55,7 @@ data_input的版本是指为了适配不同安装程序版本而修改的.zip压 2. 按(select)键更新arm9loaderhax 3. 关机并将SD卡插入你的电脑 4. 删除SD卡根目录下的 `a9lh` 目录 -5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` +5. 将`safea9lhinstaller.bin`从`/luma/payloads/`目录中删除 ##### 第三部分 - 设置 Luma3DS diff --git a/_pages/zh_TW/Decrypt9-(Homebrew-Launcher).txt b/_pages/zh_TW/Decrypt9-(Homebrew-Launcher).txt index fcf4d6c77e..0a7ede0b4d 100644 --- a/_pages/zh_TW/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/zh_TW/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /zh_TW/decrypt9-(homebrew-launcher).html #### 操作說明 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. 在 SD 卡的根目錄底下，建立一個新資料夾「files9」 -2. 在 SD 卡上，將 `safehax.3dsx` 複製到 `/3ds/` 資料夾底下 -3. 在 SD 卡上，將 `fasthax.3dsx` 複製到 `/3ds/` 資料夾底下 -4. 從 Decrypt9WIP `.zip` 中解壓 `Decrypt9WIP.bin` 到 SD 卡的根目錄，並重新命名為 `safehaxpayload.bin` -5. 將 SD 卡插回至你的 3DS 中 -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. 在 SD 卡的根目錄底下，建立一個新資料夾「files9」 +3. 在 SD 卡上，將 `safehax.3dsx` 複製到 `/3ds/` 資料夾底下 +4. 在 SD 卡上，將 `fasthax.3dsx` 複製到 `/3ds/` 資料夾底下 +5. 從 Decrypt9WIP `.zip` 中解壓 `Decrypt9WIP.bin` 到 SD 卡的根目錄，並重新命名為 `safehaxpayload.bin` +6. 將 SD 卡插回至你的 3DS 中 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/zh_TW/Installing-arm9loaderhax.txt b/_pages/zh_TW/Installing-arm9loaderhax.txt index 83caf05434..635279cea9 100644 --- a/_pages/zh_TW/Installing-arm9loaderhax.txt +++ b/_pages/zh_TW/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ permalink: /zh_TW/installing-arm9loaderhax.html {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. 選擇 「SysNAND Backup/Restore」 -4. 選擇 「SysNAND Restore (keep a9lh)」並從 `NANDmin.bin` 中還原系統 -5. 按下「開始鍵 (Start)」以重啟 +2. 選擇 「SysNAND Backup/Restore」 +3. 選擇 「SysNAND Restore (keep a9lh)」並從 `NANDmin.bin` 中還原系統 +4. 按下「開始鍵 (Start)」以重啟 + 如果黑屏，請進行[版本 9.2.0 的 ctrtransfer](9.2.0-ctrtransfer) 6. 如果你所備份的系統版本是在 3.0.0 到 4.5.0 之間，在你下載必備的韌體前，你的主機將無法開機： + 下載[此檔案](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056)並將它重新命名為`firmware.bin` + 下載[此檔案](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + 複製 `firmware.bin` 及 `cetk` 檔案到 SD 卡上的 `/luma/` 資料夾 + 在更新完你的 3DS 主機後，刪除這兩個檔案 -7. 到 3DS 主選單中更新你的主機，去「系統設置（System Settings）」、「其他設置（Other Settings）」底下選擇「系統更新（System Update）」 +6. 到 3DS 主選單中更新你的主機，去「系統設置（System Settings）」、「其他設置（Other Settings）」底下選擇「系統更新（System Update）」 + 在 A9LH + Luma （不管你用什麼）底下更新是沒問題的，別再問啦 + 之前有說過千萬不要更新版本 2.1.0 的 新 3DS，這點在還原過 NAND 備份後就沒關係了。 + 如果過程中出現錯誤，試試到 DNS 設定底下將設定改成「自動 （auto）」 @@ -136,12 +136,12 @@ permalink: /zh_TW/installing-arm9loaderhax.html ##### 第五節 — 注入 FBI 管理器 1. Boot your device while holding (Start) to enter Hourglass9 -3. 選擇「SysNAND Options」中的「Health&Safety Dump」以匯出「健康與安全」程式至 `hs.app` **（你可以透過方向鍵更改名字）** -4. 按下「B」，選擇「Health&Safety Inject」 -5. 選擇對應裝置區域用來注入 FBI 管理器的`.app`檔 -6. 按下「A」以確認注入 -7. 按下「開始鍵 (Start)」以重啟 -8. 如果你啟動後發現依然是原廠的「健康與警示」程式，並且之前曾經用 Gateway 進行過系統降級，[請參見此疑難排解](troubleshooting#gw_fbi) +2. 選擇「SysNAND Options」中的「Health&Safety Dump」以匯出「健康與安全」程式至 `hs.app` **（你可以透過方向鍵更改名字）** +3. 按下「B」，選擇「Health&Safety Inject」 +4. 選擇對應裝置區域用來注入 FBI 管理器的`.app`檔 +5. 按下「A」以確認注入 +6. 按下「開始鍵 (Start)」以重啟 +7. 如果你啟動後發現依然是原廠的「健康與警示」程式，並且之前曾經用 Gateway 進行過系統降級，[請參見此疑難排解](troubleshooting#gw_fbi) ##### 第六節 — 最終設定