since people cannot read: move Luma steps to the installing boot9strap pages (hope this reduces the number of people falsely thinking they are bricked)

_pages/en_US/finalizing-setup.txt

@@ -23,7 +23,6 @@ During this process, we also setup programs such as the following:
 
 #### What you need
 
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The latest release of [Themely](https://github.com/ErmanSayin/Themely/releases/latest) *(the `.cia` file)*
 * The latest release of [hblauncher_loader](https://github.com/yellows8/hblauncher_loader/releases/latest)
 * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
@@ -36,6 +35,7 @@ During this process, we also setup programs such as the following:
 
 ##### Section I - Prep Work
 
+1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
 1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
@@ -48,7 +48,6 @@ During this process, we also setup programs such as the following:
     ![]({{ base_path }}/images/screenshots/cias-file-layout.png)
     {: .notice--info}
 
-1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
 1. Create a folder named `luma` on the root of your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card
 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
@@ -68,17 +67,9 @@ During this process, we also setup programs such as the following:
   + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
   + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
+1. Power on your device
 
-##### Section II - Configuring Luma3DS
+##### Section II - Updating the System
-
-1. Boot your device to enter the Luma3DS configuration menu
-  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
-1. Use the (A) button and the D-Pad to turn on the following:    
-  + **"Show NAND or user string in System Settings"**
-1. Press (Start) to save and reboot
-  + If you get a black screen, just continue to the next section   
-
-##### Section III - Updating the System
 
 If, while following a previous version of this guide, you CTRTransfered your *New 3DS* to 2.1.0, now is the time to [restore your NAND backup](godmode9-usage#nand_restore) before doing this section.
 {: .notice--danger}
@@ -91,7 +82,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + If this gives you an error, set your DNS settings to "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 
-##### Section IV - Injecting FBI
+##### Section III - Injecting FBI
 
 1. Reboot holding (Start) during boot to launch GodMode9
 1. Navigate to `[0:] SDCARD` -> `cias`
@@ -102,7 +93,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Start) to reboot your device
 1. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi)
 
-##### Section V - Installing CIAs
+##### Section IV - Installing CIAs
 
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
@@ -110,12 +101,12 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
-##### Section VI - DSP Dump
+##### Section V - DSP Dump
 
 1. Launch DSP1
 1. Once it has completed, press (B) to self-delete the app and return to the home menu
 
-##### Section VII - Restore Health and Safety
+##### Section VI - Restore Health and Safety
 
 1. Reboot holding (Start) during boot to launch GodMode9
 1. Press (Home) to bring up the action menu
@@ -123,7 +114,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Select "Restore H&S"
 1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
 
-##### Section VIII - CTRNAND Luma3DS
+##### Section VII - CTRNAND Luma3DS
 
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
@@ -139,7 +130,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
-##### Section IX - NAND Backup
+##### Section VIII - NAND Backup
 
 1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu

_pages/en_US/installing-boot9strap-(2xrsa).txt

@@ -9,6 +9,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
 
 #### Instructions
@@ -17,6 +18,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 1. Power off your device
 1. Insert your SD card into your computer
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
 1. Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card
 1. Create a folder named `boot9strap` on the root of your SD card
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
@@ -39,8 +41,14 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 1. Wait for all safety checks to complete
 1. When prompted, input the key combo given to install boot9strap
 1. Once it has completed, press (A) to reboot your device
-1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
+
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+##### Section IV - Configuring Luma3DS
+
+1. Your device should have rebooted into the Luma3DS configuration menu
+  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:    
+  + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
 
 ___
 

_pages/en_US/installing-boot9strap-(browser).txt

@@ -12,6 +12,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
 
 #### Instructions
@@ -20,6 +21,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 1. Power off your device
 1. Insert your SD card into your computer
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
 1. Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card
 1. Create a folder named `boot9strap` on the root of your SD card
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
@@ -43,8 +45,14 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 1. Wait for all safety checks to complete
 1. When prompted, input the key combo given to install boot9strap
 1. Once it has completed, press (A) to reboot your device
-1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
+
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+##### Section IV - Configuring Luma3DS
+
+1. Your device should have rebooted into the Luma3DS configuration menu
+  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:    
+  + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
 
 ___
 

_pages/en_US/installing-boot9strap-(dsiware-game-injection).txt

@@ -26,6 +26,7 @@ Before proceeding, ensure you have read all of the notices and warnings on [Inst
 * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
 * The latest release of [b9sTool](https://github.com/Plailect/b9sTool/releases/latest)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
 * The 11.4.0 `.firm` corresponding to **the target 3DS**
   + [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
@@ -131,6 +132,7 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 
 ##### Section V - Backing up the target 3DS's FIRM
 
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
 1. Copy `boot.nds` to the root of **the target 3DS**'s SD card
 1. Create a folder named `boot9strap` on the root of **the target 3DS**'s SD card
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
@@ -142,6 +144,7 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Exit b9sTool
   + You may have to force power off by holding the power button
 1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM
 
@@ -152,8 +155,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Select "Install boot9strap" and confirm
 1. Exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
-1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
+1. Power on **the target 3DS**
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+
+##### Section VII - Configuring Luma3DS
+
+1. Your device should have booted into the Luma3DS configuration menu
+  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:    
+  + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
 
 ___
 

_pages/en_US/installing-boot9strap-(dsiware-save-injection).txt

@@ -28,6 +28,7 @@ If you do not use the correct `.firm` corresponding to the target 3DS, you will
 * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
 * The latest release of [b9sTool](https://github.com/Plailect/b9sTool/releases/latest)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
 * The 11.4.0 `.firm` corresponding to **the target 3DS**
   + [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
@@ -137,6 +138,7 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 
 ##### Section V - Backing up the target 3DS's FIRM
 
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
 1. Copy `boot.nds` to the root of **the target 3DS**'s SD card
 1. Create a folder named `boot9strap` on the root of **the target 3DS**'s SD card
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
@@ -153,6 +155,7 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Exit b9sTool
   + You may have to force power off by holding the power button
 1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM
 
@@ -168,8 +171,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Select "Install boot9strap" and confirm
 1. Exit b9sTool, then power off your device
   + You may have to force power off by holding the power button
-1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
+1. Power on **the target 3DS**
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+
+##### Section VII - Configuring Luma3DS
+
+1. Your device should have booted into the Luma3DS configuration menu
+  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:    
+  + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
 
 ___
 

_pages/en_US/installing-boot9strap-(hardmod).txt

@@ -19,6 +19,7 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
 * The `.firm` corresponding to your device and version:
 
@@ -55,16 +56,30 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 
 #### Instructions
 
+##### Section I - Prep Work
+
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
 1. Copy the hardmod-b9s-installer folder from the hardmod-b9s-installer `.zip` to your computer
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
 1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
+
+##### Section II - Installing boot9strap
+
 1. Run hardmod-b9s-installer
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+1. Power on your device
+
+##### Section IV - Configuring Luma3DS
+
+1. Your device should have booted into the Luma3DS configuration menu
+  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:    
+  + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
 
 ___
 

_pages/en_US/installing-boot9strap-(homebrew-launcher).txt

@@ -14,12 +14,14 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest)
 * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 
 #### Instructions
 
 ##### Section I - Prep Work
 
 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
 1. Create a folder named `boot9strap` on the root of your SD card
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card
@@ -50,8 +52,14 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 1. Wait for all safety checks to complete
 1. When prompted, input the key combo given to install boot9strap
 1. Once it has completed, press (A) to reboot your device
-1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
+
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+##### Section IV - Configuring Luma3DS
+
+1. Your device should have rebooted into the Luma3DS configuration menu
+  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:    
+  + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
 
 ___
 

_pages/en_US/installing-boot9strap-(mset).txt

@@ -12,6 +12,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
 * Any DS flashcart that works on your device version
 
@@ -21,6 +22,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 1. Power off your device
 1. Insert your SD card into your computer
+1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
 1. Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card
 1. Create a folder named `boot9strap` on the root of your SD card
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
@@ -44,8 +46,14 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 1. Wait for all safety checks to complete
 1. When prompted, input the key combo given to install boot9strap
 1. Once it has completed, press (A) to reboot your device
-1. Your device will boot into boot9strap, then shutdown automatically because it does not yet have a payload to launch
+
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+##### Section IV - Configuring Luma3DS
+
+1. Your device should have rebooted into the Luma3DS configuration menu
+  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
+1. Use the (A) button and the D-Pad to turn on the following:    
+  + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
 
 ___
 

_pages/en_US/troubleshooting.txt

@@ -151,36 +151,6 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
 1. Try following [9.2.0 CTRTransfer](9.2.0-ctrtransfer)
 1. Ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp).
 
-## <a name="ts_transfer" />Error during SafeB9SInstaller
-
-If an error occurs during the SafeB9SInstaller process, you will be prompted to launch an external payload for the purpose of repairing your device.
-
-#### What you need
-
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
-
-#### Instructions
-
-1. Select "Unmount SD card"
-1. Insert your SD card into your computer
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/boot9strap/` folder on your SD card and rename `GodMode9.bin` in `/boot9strap/` to `payload.bin`
-1. Reinsert your SD card into your device
-1. Select "Run 0:/CTRTransfer/payload.bin"
-1. If it was successful, you will have entered GodMode9
-1. Navigate to `[0:] SDCARD` -> `boot9strap`
-1. Press the (L) trigger on `firm0firm1.bak` and `sector0x96.bak` to mark them
-1. Press (Y) to copy the files
-1. Press (B) twice to return to the main menu
-1. Navigate to `[S:] SYSNAND VIRTUAL`
-1. Press (Y) to paste a copy of `firm0firm1.bak` and `sector0x96.bak`
-1. Press (A) to confirm
-1. Press (A) to inject the files
-1. Press (A) to unlock SysNAND overwriting
-1. Input the key combo given to unlock SysNAND (lvl3) writing
-1. Once it has completed, press (A) to continue
-1. Press (Start) to reboot your device
-1. Report this issue to the [SafeB9SInstaller Issues Page](https://github.com/d0k3/SafeB9SInstaller/issues)
-
 ## <a name="ts_sys_blue" />Blue screen on boot (bootrom error)
 
 1. Your device is bricked