close #967 and fix several ctrtransfer related issues

This commit is contained in:
Plailect 2017-02-22 19:10:53 -05:00
parent fbe091ef4c
commit ef43720946
2 changed files with 39 additions and 30 deletions

View file

@ -10,7 +10,7 @@ If you downgraded to 2.1.0 but for some reason have **no functional NAND backups
Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide.
{: .notice--info}
Because the point of the 9.2.0 ctrtransfer is to troubleshoot issues caused by the existing NAND, these steps, unlike the 2.1.0 ctrtransfer, will have you backup only the tickets and config save. Failure to back these up will result in the LOSS of all installed games and saves!
Because the point of the 9.2.0 ctrtransfer is to troubleshoot issues caused by the existing NAND, these steps, unlike the 2.1.0 ctrtransfer, will have you backup only the tickets. Failure to back these up will result in the LOSS of all installed games and saves!
{: .notice--danger}
#### What you need
@ -36,7 +36,7 @@ Because the point of the 9.2.0 ctrtransfer is to troubleshoot issues caused by t
3. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin`
4. Reinsert your SD card into your 3DS
##### Section II - Backup tickets and config save
##### Section II - Backup tickets
1. Open Decrypt9 from arm9loaderhax by holding (X) during boot
2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)"
@ -44,7 +44,6 @@ Because the point of the 9.2.0 ctrtransfer is to troubleshoot issues caused by t
4. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-"
+ If none start with "00-", then just delete all of them
5. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu
6. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin"
##### Section III - ctrtransfer
@ -63,20 +62,17 @@ Because the point of the 9.2.0 ctrtransfer is to troubleshoot issues caused by t
+ Updates while using A9LH + Luma (what you have) are safe, stop asking about it
+ If this gives you an error, set your DNS settings to "auto"
##### Section IV - Restore config save
1. Reboot holding (X) during boot to launch arm9loaderhax Decrypt9
2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin"
3. Press (B) to get back to the main menu
##### Section V - Injecting FBI
1. Go to "SysNAND Options", then "Miscellaneous", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)**
2. Press (B), then select the "Health&Safety Inject" option
3. Select the FBI injectable `.app` for your region
4. Press (A) and confirm to inject
5. Press (Start) to reboot
6. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi)
1. Reboot holding (Start during boot to launch Hourglass9
2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)**
+ If this file exists already, you can skip the Health and Safety dump
3. Press (B), then select the "Health&Safety Inject" option
4. Input the key combo given
5. Select the FBI injectable `.app` for your region
6. Press (A) and confirm to inject
7. Press (Start) to reboot
8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi)
##### Section VI - Reinstalling Tickets
@ -93,10 +89,14 @@ If you had no tickets beginning with 00- earlier, you can skip this section.
8. Press (B) to decline installing tickets from CDN.
9. Exit with the home button
___
##### Section VII - Restore Health and Safety
Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794).
{: .notice--info}
1. Press (Start) then hold (Start) to reboot into Hourglass9
2. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
3. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
4. Press (Start) to reboot
___
Return to [Installing arm9loaderhax](installing-arm9loaderhax).
{: .notice--primary}

View file

@ -19,7 +19,7 @@ After this process, only **New 3DSs which have never accessed the eShop before**
Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it.
{: .notice--warning}
Region changing using ctrtransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon).
Region changing using ctrtransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices (details at the end of this page).
{: .notice--warning}
**You MUST have already installed arm9loaderhax + Luma3DS to use this.**
@ -50,7 +50,7 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot
3. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card
4. Reinsert your SD card into your 3DS
##### Section II - Backup tickets and config save
##### Section II - Backup tickets
1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9
3. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)"
@ -58,7 +58,6 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot
5. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-"
6. Leave all the `.tik` files that do start with "00-" in the folder
7. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu
8. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin"
##### Section III - ctrtransfer
@ -95,9 +94,20 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot
- "02" : EUR
16. Press (B) to exit edit mode, then save changes, then press (B) again to return to the directory
17. You should see both a `SecureInfo_A` and `SecureInfo_C` if everything was done properly. (`SecureInfo_C` is used in place of `SecureInfo_A` when using Luma3DS if it detects the file on boot)
18. Press (Start) to reboot
18. Press and hold (Start) to reboot into Hourglass9
##### Section V - Reinstalling Tickets
##### Section V - Injecting FBI
1. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)**
+ If this file exists already, you can skip the Health and Safety dump
2. Press (B), then select the "Health&Safety Inject" option
3. Input the key combo given
4. Select the FBI injectable `.app` for your region
5. Press (A) and confirm to inject
6. Press (Start) to reboot
7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi)
##### Section VI - Reinstalling Tickets
1. Open FBI
2. Select "SD"
@ -109,7 +119,7 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot
8. Press (B) to decline installing tickets from CDN.
9. Exit with the home button
##### Section VI - Region settings
##### Section VII - Region settings
1. Open the System Settings
2. Go to "Other Settings", "Profile", then "Region Settings"
@ -117,15 +127,14 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot
4. If prompted, you do not need to set a state
5. Update your region changed CFW SysNAND to the latest version
##### Section VII - Restore config save
##### Section VIII - Restore Health and Safety
1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9
2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin"
1. Press (Start) then hold (Start) to reboot into Hourglass9
2. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
3. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
4. Press (Start) to reboot
___
Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon).
{: .notice--info}
Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794).
{: .notice--info}