` 是一个看上去像一串乱码的 32 位字符长的文件夹。 如果你之前用过 Seedminer,那么你可能会知道它。
+1. 使用十字键将光标移动至 `00010017`
+1. 按下 “R” + “A” 键打开文件夹选项菜单
1. 选择 “Copy to 0:/gm9/out”
1. 按 “A” 键继续
-1. While still highlighting `00010017`, press (X) to delete it
+1. 将光标继续对准 `00010017`,然后按下 “X” 键删除
1. 按下 “A” 键确认
-1. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
-1. Once the file has been deleted, press (A) to continue
+1. 按 “A” 键解锁SysNAND (lvl2) 写入权限,并根据屏幕上的提示依次按下按键
+1. + 待文件删除后,按 “A” 键以继续
1. 如果提示重新锁定写入权限,按下 “A” 键来确认
-1. Press (Start) to reboot your console
-1. Your console will load into the initial setup menu
- + This is expected behaviour. You have not lost any of your game data
-1. Complete the initial setup menu by following the prompts on your console's screen
+1. 按下 “Start” 键重启主机
+1. 你的主机将自动进入至初始设置的菜单
+ + 这是正常的。 你的主机没有丢失任何的游戏数据。
+1. 根据初始设置菜单的提示完成设置操作。
diff --git a/_pages/zh_CN/include/ctrtransfer-prep.txt b/_pages/zh_CN/include/ctrtransfer-prep.txt
index c13ad12bf2..6818c1a97c 100644
--- a/_pages/zh_CN/include/ctrtransfer-prep.txt
+++ b/_pages/zh_CN/include/ctrtransfer-prep.txt
@@ -1,4 +1,4 @@
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 检查 SD 卡的根目录是否存在一个名为 `3ds` 的文件夹,如果没有则手动新建一个
1. 将 GodMode9 `.zip` 中的 `GodMode9.firm` 复制到你 SD 卡的 `/luma/payloads/` 文件夹中
diff --git a/_pages/zh_CN/include/install-boot9strap-b9stool.txt b/_pages/zh_CN/include/install-boot9strap-b9stool.txt
index b249b97781..4268a529c1 100644
--- a/_pages/zh_CN/include/install-boot9strap-b9stool.txt
+++ b/_pages/zh_CN/include/install-boot9strap-b9stool.txt
@@ -24,5 +24,5 @@ In this section, you will perform a series of very specific steps within Flipnot
1. Press (A), then press START and SELECT at the same time to begin the process
1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your console
+ You may have to force power off by holding the power button
- + If your console shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + 如果你的主机在你尝试开机后直接自动关机了,请确认你已经从 Luma3DS `.zip` 中复制了 `boot.firm` 文件到你的 SD 卡根目录中
+ If you see the Luma Configuration screen, power off your console and continue to the next section
diff --git a/_pages/zh_CN/include/rmproxy.txt b/_pages/zh_CN/include/rmproxy.txt
index f402343ba3..9422592918 100644
--- a/_pages/zh_CN/include/rmproxy.txt
+++ b/_pages/zh_CN/include/rmproxy.txt
@@ -7,4 +7,4 @@
1. 点击 OK,然后点击保存(保存する / Save)
1. 当提示时,点击“测试(テスト / Test)”进行连接测试
+ 测试应该会成功
-1. Power off your console
+1. 将主机关机
diff --git a/_pages/zh_CN/include/seedminer-base.txt b/_pages/zh_CN/include/seedminer-base.txt
index 6cf0450216..c355f909a8 100644
--- a/_pages/zh_CN/include/seedminer-base.txt
+++ b/_pages/zh_CN/include/seedminer-base.txt
@@ -22,7 +22,7 @@ Before following this section:
{% endcapture %}
{{ console_state_info | markdownify }}
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 打开你 SD 卡的 `Nintendo 3DS` 文件夹
1. 从 Nintendo 3DS 文件夹里面复制里面的一个 32 位长名字的文件夹的名称
@@ -63,4 +63,4 @@ In this section, you will use the Bruteforce Movable website to retrieve your co
+ If you get "We were unable to successfully complete your bruteforce request. :`(", follow the [respective troubleshooting on this page](troubleshooting#seedminer)
1. When the process is completed, download your `movable.sed` file from the site
+ Keep this file as you will need it in the upcoming page
-1. Power off your console
+1. 将主机关机
diff --git a/_pages/zh_CN/installing-boot9strap-(freakyhax).txt b/_pages/zh_CN/installing-boot9strap-(freakyhax).txt
index 25c0b3101d..32cdaf1052 100644
--- a/_pages/zh_CN/installing-boot9strap-(freakyhax).txt
+++ b/_pages/zh_CN/installing-boot9strap-(freakyhax).txt
@@ -29,7 +29,7 @@ This method requires a working 3DS camera.
#### 第一步 – 准备工作
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. Copy all files and folders inside the `/build//exploit/` folder from the freakyhax `.zip` to the root of your SD card
+ 根目录指的是你点进 SD 卡看到的目录,你可以在这个目录下看到 Nintendo 3DS 文件夹,但请不要点进去
diff --git a/_pages/zh_CN/installing-boot9strap-(hardmod).txt b/_pages/zh_CN/installing-boot9strap-(hardmod).txt
index 84861a83ed..0f60956f86 100644
--- a/_pages/zh_CN/installing-boot9strap-(hardmod).txt
+++ b/_pages/zh_CN/installing-boot9strap-(hardmod).txt
@@ -74,7 +74,7 @@ title: "安装 boot9strap(通过硬改)"
在本节中,你将下载硬改所需的必要的文件,并导出 NAND 镜像以准备安装自制固件。
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
1. 从 hardmod-b9s-installer `.zip` 中复制 hardmod-b9s-installer 文件夹至电脑中
@@ -93,7 +93,7 @@ In this section, you will install custom firmware to the dumped NAND image, and
+ Windows用户:请运行 `install-b9s.exe` 程序
+ Mac and Linux用户:请运行 `install-b9s.py` 文件
1. Flash your outputted `NAND-patched.bin` to your console with your hardmod
-1. Power off your console
+1. 将主机关机
1. 移除你的硬改
1. Press and hold (Select), and while holding (Select), power on your console
{% include_relative include/configure-luma3ds.txt %}
diff --git a/_pages/zh_CN/installing-boot9strap-(kartminer7).txt b/_pages/zh_CN/installing-boot9strap-(kartminer7).txt
index 7d0841c617..c137a50ea8 100644
--- a/_pages/zh_CN/installing-boot9strap-(kartminer7).txt
+++ b/_pages/zh_CN/installing-boot9strap-(kartminer7).txt
@@ -43,7 +43,7 @@ In this section, you will have the 3DS generate some data in Mario Kart 7 that w
1. Tap the "StreetPass List" button on the bottom of the screen, in the middle
1. Press the (Home) button to suspend Mario Kart 7
1. Disable wireless connections by flicking the wireless switch on the side of the console or by navigating to HOME Menu Settings (top left) -> Wireless Communication -> OFF
-1. Power off your console
+1. 将主机关机
#### Section II - SD Card Prep Work
diff --git a/_pages/zh_CN/installing-boot9strap-(menuhax).txt b/_pages/zh_CN/installing-boot9strap-(menuhax).txt
index ee8316c9cd..e5e804533c 100644
--- a/_pages/zh_CN/installing-boot9strap-(menuhax).txt
+++ b/_pages/zh_CN/installing-boot9strap-(menuhax).txt
@@ -24,7 +24,7 @@ See [here](https://github.com/luigoalma/nimdsphax) for information about nimdsph
#### 第一步 – 准备工作
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
1. 在 SD 卡根目录创建一个名为 `boot9strap` 的文件夹
@@ -71,7 +71,7 @@ In this section, you will trigger the BannerBomb3 exploit a second time so that
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
1. Use the D-Pad to navigate and press the (A) button to select "Uninstall *hax"
+ Your console will automatically reboot
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 打开内存卡的 `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` 文件夹
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore
diff --git a/_pages/zh_CN/installing-boot9strap-(ninjhax2-dx).txt b/_pages/zh_CN/installing-boot9strap-(ninjhax2-dx).txt
index 8737f21013..c244833d9d 100644
--- a/_pages/zh_CN/installing-boot9strap-(ninjhax2-dx).txt
+++ b/_pages/zh_CN/installing-boot9strap-(ninjhax2-dx).txt
@@ -29,7 +29,7 @@ This process will overwrite your Cubic Ninja save file, if you have one.
#### 第一步 – 准备工作
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. Copy `Launcher.dat` from the folder appropriate for your console from the ninjhax2-dx `.zip` file to the root of your SD card
+ 根目录指的是你点进 SD 卡看到的目录,你可以在这个目录下看到 Nintendo 3DS 文件夹,但请不要点进去
diff --git a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
index 5dcce2a7f6..b49cfef091 100644
--- a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
+++ b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
@@ -20,7 +20,7 @@ title: "安装boot9strap (通过 ntrboot)"
#### 第一步 – 准备工作
-1. Power off your console
+1. 将主机关机
1. 将你主机的 SD 卡插入你的电脑
+ 这里指的是 3DS 的 SD 卡,**不**是烧录卡中的 SD 卡
1. 将 SafeB9SInstaller `.zip` 中的 `SafeB9SInstaller.firm` 复制到 SD 卡的根目录下,然后重命名为 `boot.firm`
@@ -39,7 +39,7 @@ title: "安装boot9strap (通过 ntrboot)"
1. Use the magnet to find the spot on your console where the sleep sensor is triggered
+ 老型号的 2DS 可以跳过此步(因为其有独立的休眠开关)
-1. Power off your console
+1. 将主机关机
1. Insert your flashcart into your console
1. Place the magnet on your console to trigger the sleep sensor
+ 老型号的 2DS 将休眠模式开关打开即可
@@ -116,7 +116,7 @@ ___
##### 操作步骤
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
+ 这里指的是 3DS 的 SD 卡,**不**是烧录卡中的 SD 卡
1. 在 SD 卡根目录创建一个名为 `ntrboot` 的文件夹
diff --git a/_pages/zh_CN/installing-boot9strap-(pichaxx).txt b/_pages/zh_CN/installing-boot9strap-(pichaxx).txt
index 5689af0ea9..990bc42617 100644
--- a/_pages/zh_CN/installing-boot9strap-(pichaxx).txt
+++ b/_pages/zh_CN/installing-boot9strap-(pichaxx).txt
@@ -34,7 +34,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
+ 根目录指的是你点进 SD 卡看到的目录,你可以在这个目录下看到 Nintendo 3DS 文件夹,但请不要点进去
diff --git a/_pages/zh_CN/installing-boot9strap-(safecerthax).txt b/_pages/zh_CN/installing-boot9strap-(safecerthax).txt
index 7dac8518d3..51bd51da82 100644
--- a/_pages/zh_CN/installing-boot9strap-(safecerthax).txt
+++ b/_pages/zh_CN/installing-boot9strap-(safecerthax).txt
@@ -23,7 +23,7 @@ This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ens
* 最新版本的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip)(直链)
* 最新版本的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)(直链)
-* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+* 最新版本的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)(下载 Luma3DS `.zip` 文件)
### 操作步骤
@@ -34,7 +34,7 @@ In this section, you will see whether your shoulder buttons are working on your
1. Power on your console
1. Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+ The camera applet should appear
-1. Power off your console
+1. 将主机关机
If the camera did NOT appear, you cannot follow this method. If this is the case, stay on your current firmware and ask [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for help.
{: .notice--warning}
@@ -57,7 +57,7 @@ In this section, you will copy the files needed to trigger the safecerthax explo
In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your console.
{% include_relative include/addproxy.txt %}
-1. Power off your console
+1. 将主机关机
#### Section IV - safecerthax
diff --git a/_pages/zh_CN/installing-boot9strap-(smilehax-iie).txt b/_pages/zh_CN/installing-boot9strap-(smilehax-iie).txt
index 6a9a544f8d..55430c556b 100644
--- a/_pages/zh_CN/installing-boot9strap-(smilehax-iie).txt
+++ b/_pages/zh_CN/installing-boot9strap-(smilehax-iie).txt
@@ -29,7 +29,7 @@ This set of instructions does not support the Japanese version of SmileBASIC.
#### 第一步 – 准备工作
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
+ 根目录指的是你点进 SD 卡看到的目录,你可以在这个目录下看到 Nintendo 3DS 文件夹,但请不要点进去
diff --git a/_pages/zh_CN/installing-boot9strap-(soundhax).txt b/_pages/zh_CN/installing-boot9strap-(soundhax).txt
index 17c535ed06..5100d3879c 100644
--- a/_pages/zh_CN/installing-boot9strap-(soundhax).txt
+++ b/_pages/zh_CN/installing-boot9strap-(soundhax).txt
@@ -31,7 +31,7 @@ Soundhax(和 universal-otherapp 一起使用时)与所有区域 1.0.0 至 11
本节中,你将会复制一些触发 Soundhax 和 universal-otherapp 所需要的文件。
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 复制 Soundhax 的 `.m4a` 文件到你的 SD 卡根目录下
+ 根目录指的是你点进 SD 卡看到的目录,你可以在这个目录下看到 Nintendo 3DS 文件夹,但请不要点进去
@@ -53,8 +53,6 @@ Soundhax(和 universal-otherapp 一起使用时)与所有区域 1.0.0 至 11
本节中,你将通过 Nintendo 3DS 音乐程序启动 Soundhax,它将使用 universal-otherapp 启动 boot9strap(自制固件)安装程序。
-1. Reinsert your SD card into your console
-1. Power on your console
1. 启动 “任天堂 3DS 音乐(Nintendo 3DS Sound)”
![]({{ "/images/screenshots/soundhax-welcome.png" | absolute_url }})
diff --git a/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt b/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt
index ec4715f0c1..7f99367798 100644
--- a/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt
@@ -34,7 +34,7 @@ SSLoth 允许目前系统版本在 11.13.0 及其以下的主机绕过浏览器
本节中,你将会复制一些触发 browserhax 和 universal-otherapp 所需要的文件。
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 复制 `otherapp.bin` 到你 SD 卡的根目录下,然后重命名为 `arm11code.bin`
+ 根目录指的是你点进 SD 卡看到的目录,你可以在这个目录下看到 Nintendo 3DS 文件夹,但请不要点进去
diff --git a/_pages/zh_CN/installing-boot9strap-(steelhax).txt b/_pages/zh_CN/installing-boot9strap-(steelhax).txt
index 728d092d4e..fcea45ef9f 100644
--- a/_pages/zh_CN/installing-boot9strap-(steelhax).txt
+++ b/_pages/zh_CN/installing-boot9strap-(steelhax).txt
@@ -33,7 +33,7 @@ This process will overwrite your Steel Diver: Sub Wars save file, if you have on
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
+ 根目录指的是你点进 SD 卡看到的目录,你可以在这个目录下看到 Nintendo 3DS 文件夹,但请不要点进去
@@ -67,7 +67,7 @@ In this section, you will create a hacked Steel Diver: Sub Wars save file that,
+ Decline the game update when prompted
+ If you have already updated the game, use the Data Management menu of the System Settings to delete the update
1. Exit "Steel Diver: Sub Wars"
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. Open [the SteelHax Save Tool website](https://3dstools.nhnarwhal.com/#/steelhax) on your computer
1. Select your `movable.sed` file
diff --git a/_pages/zh_CN/installing-boot9strap-(super-skaterhax).txt b/_pages/zh_CN/installing-boot9strap-(super-skaterhax).txt
index eaab795a9b..9ec43f2bec 100644
--- a/_pages/zh_CN/installing-boot9strap-(super-skaterhax).txt
+++ b/_pages/zh_CN/installing-boot9strap-(super-skaterhax).txt
@@ -31,7 +31,7 @@ The instructions provided only apply to the New 3DS, New 3DS XL, and New 2DS XL.
In this section, you will copy the files needed to trigger both super-skaterhax and the Homebrew Launcher.
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
+ 根目录指的是你点进 SD 卡看到的目录,你可以在这个目录下看到 Nintendo 3DS 文件夹,但请不要点进去
@@ -53,7 +53,7 @@ In this section, you will copy the files needed to trigger both super-skaterhax
In this section, you will visit the browser exploit webpage, which will launch the Homebrew Launcher.
-If you haven't already, make sure you have a working Internet connection set up on your console.
+在开始之前,请确保你的主机已经设置了一个可以连接互联网的无线网络。
{: .notice--info}
1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
@@ -74,7 +74,7 @@ If you haven't already, make sure you have a working Internet connection set up
+ If any prompts appear, approve all of them
+ If your console freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
- + If you get another error, try again up to 5 times, and if it still doesn't work, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+ + If you get another error, try again up to 5 times, and if it still doesn't work, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-super-skaterhax)
1. Your console will have booted into the Homebrew Launcher
1. Launch nimdsphax from the list of homebrew
1. 如果一切成功的话,你将自动进入 SafeB9SInstaller
diff --git a/_pages/zh_CN/move-emunand.txt b/_pages/zh_CN/move-emunand.txt
index f308b92210..f8af19217b 100644
--- a/_pages/zh_CN/move-emunand.txt
+++ b/_pages/zh_CN/move-emunand.txt
@@ -23,7 +23,7 @@ title: "迁移EmuNAND数据"
#### 第一步 – 准备工作
-1. Power off your console
+1. 将主机关机
1. 将SD卡插入电脑
1. 从GodMode9 `.zip` 中复制 `GodMode9.firm` 到SD卡的 `/luma/payloads/` 文件夹中
1. 将 GodMode9 `.zip` 中的整个 `gm9` 文件夹复制到 SD 卡的根目录下
diff --git a/_pages/zh_CN/seedminer-(mii).txt b/_pages/zh_CN/seedminer-(mii).txt
index 3179e92058..ff761e2079 100644
--- a/_pages/zh_CN/seedminer-(mii).txt
+++ b/_pages/zh_CN/seedminer-(mii).txt
@@ -51,7 +51,7 @@ In this section, you will set up Seedminer and obtain your console's files that
1. Tap the "QR Code/Image Options" button
1. Tap "Save Mii as QR Code"
1. Select a Mii Character **that was created on this console, NOT imported from another console** (make a new one first if you don't have any), and press "OK"
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 打开你 SD 卡的 `Nintendo 3DS` 文件夹
1. 从 Nintendo 3DS 文件夹里面复制里面的一个 32 位长名字的文件夹的名称
diff --git a/_pages/zh_CN/troubleshooting.txt b/_pages/zh_CN/troubleshooting.txt
index 0570b8d1ca..39a3ec5837 100644
--- a/_pages/zh_CN/troubleshooting.txt
+++ b/_pages/zh_CN/troubleshooting.txt
@@ -93,7 +93,7 @@ This occurs when you use your SD card in multiple 3DS consoles and is intended t
1. Power on your console
1. Wait for the console to generate the SD card data
+ 你先前安装的程序会暂时消失。 这是正常的,且接下来就会还原回来。
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 打开你 SD 卡的 `Nintendo 3DS` 文件夹
1. 复制你看到的 32 位字符文件夹的名称
@@ -455,14 +455,6 @@ If the problem persists:
{% endcapture %}
{{ compat | markdownify }}
-{% capture compat %}
-Warning #01: No Nintendo 3DS folder
-
-Your SD card does not have the `Nintendo 3DS` folder. Power on your device with your SD card inserted, then wait for the device to show a message box that says "Creating HOME Menu management information". Once the message box disappears, power off your device and try again.
-
-{% endcapture %}
-{{ compat | markdownify }}
-
{% capture compat %}
Error #02: Missing essential.exefs
@@ -489,12 +481,12 @@ You did not copy everything from `finalize.zip` to the root of your SD card. Rem
You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. If you don't have enough space, follow these steps:
-1. Power off your console
+1. 将主机关机
1. Remove the SD card and insert it into your computer
1. Copy the `Nintendo 3DS` folder from the root of your SD card to your computer
1. Delete the Nintendo 3DS folder from the SD card
1. Reinsert your SD card into your console
-1. Power off your console
+1. 将主机关机
1. Hold START and power on still holding START to open GodMode9
1. Press the (Home) button
1. 选择 “Scripts...”
@@ -517,6 +509,7 @@ Now that you have your NAND backup in a safe place:
1. 选择 “Scripts...”
1. Select "finalize"
1. Continue the script as normal
+ + The NAND backup will be automatically skipped
{% endcapture %}
{{ compat | markdownify }}
@@ -524,7 +517,7 @@ Now that you have your NAND backup in a safe place:
{% capture compat %}
Information #05: No title database
-Press (A) to create a title database, unlock SysNAND writing by entering the buttons on-screen, follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
+Press (A) to import a title database, unlock SysNAND writing by entering the buttons on-screen, then continue the script as normal.
{% endcapture %}
{{ compat | markdownify }}
@@ -533,7 +526,7 @@ Press (A) to create a title database, unlock SysNAND writing by entering the but
Error #06 or "Error: Could not open directory" when attempting a NAND backup
Make sure you have at least 1.3GB available in your SD card. If you don't have enough space, follow these steps:
-1. Power off your console
+1. 将主机关机
1. Remove the SD card and insert it into your computer
1. Copy the `Nintendo 3DS` folder from the root of your SD card to your computer
1. Delete the Nintendo 3DS folder from the SD card
@@ -549,14 +542,6 @@ If you have enough space on your SD card, your SD might be corrupted or faulty.
{% endcapture %}
{{ compat | markdownify }}
-{% capture compat %}
-Error #08: Dummy title database
-
-You didn't delete the dummy title database that was created by Error #05. Follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
-
-{% endcapture %}
-{{ compat | markdownify }}
-
{% capture compat %}
Error #09: Unsupported GodMode9 version
@@ -566,14 +551,43 @@ You are somehow running a version of GodMode9 not packaged with the script. Make
{{ compat | markdownify }}
{% capture compat %}
-Information #11: NAND backup flag detected
+Error #11: Missing donor database
-You most likely already made a NAND backup on this console. If you did not make a backup or lost access to your backup, select "1. Make Another NAND Backup". Otherwise, select "2. Skip NAND Backup".
+You did not copy everything from `finalize.zip` to the root of your SD card. Remember, your SD card should have at least these files:
+
+![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
+{: .notice--info}
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Error #12: Copy (file).db fail
+Ensure that your SD card is not [locked](/images/sdlock.png). If the SD card is not locked and you continue to get this error, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+Information #17: Duplicate NAND backup
+
+The script has detected that the Nintendo 3DS folder is missing AND that you have already made a NAND backup before. If you intend to install homebrew applications, you should do the following:
+
+1. Press (B) to cancel making another NAND backup
+1. Press (Right Shoulder) + (Start) to power off your device
+1. Copy the contents of `/gm9/backups/` to a safe location on your computer
+1. Delete `/gm9/backups/` from your SD card
+1. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card
+ + If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it
+1. Press and hold (Start), and while holding (Start), power on your console. 这会启动 GodMode9
+1. 按下 “Home” 键来打开功能菜单
+1. Select “Scripts…”
+1. Select “finalize”
+1. Follow the prompts in the script, answering any questions that you are asked
+
+{% endcapture %}
+{{ compat | markdownify }}
---
@@ -688,7 +702,7 @@ Your console is likely hard-bricked. You will need to buy an ntrboot flashcart t
DSi / DS functionality is broken or has been replaced with Flipnote Studio
1. 下载最新版本的 [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) (下载 `.3dsx` 文件)
-1. Power off your console
+1. 将主机关机
1. 检查 SD 卡的根目录是否存在一个名为 `3ds` 的文件夹,如果没有则手动新建一个
1. 复制 `TWLFix-CFW.3dsx` 到你内存卡的 `/3ds/` 文件夹
1. Reinsert your SD card into your console
@@ -738,7 +752,7 @@ Your console likely still has menuhax67 installed. To uninstall menuhax67, downl
{% capture compat %}
Clear HOME Menu extdata
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 打开你 SD 卡的 `/Nintendo 3DS///extdata/00000000/` 文件夹
1. 删除对应你的 3DS 区域的文件夹:
@@ -755,7 +769,7 @@ Your console likely still has menuhax67 installed. To uninstall menuhax67, downl
{% capture compat %}
Clear HOME Menu theme data
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 打开你 SD 卡的 `/Nintendo 3DS///extdata/00000000/` 文件夹
1. 删除对应你的 3DS 区域的文件夹:
diff --git a/_pages/zh_CN/uninstall-cfw.txt b/_pages/zh_CN/uninstall-cfw.txt
index 3d126e19c7..33dad55a03 100644
--- a/_pages/zh_CN/uninstall-cfw.txt
+++ b/_pages/zh_CN/uninstall-cfw.txt
@@ -47,7 +47,7 @@ These instructions will only work on consoles with a Luma3DS version of 8.0 or h
### 操作步骤
#### 第一步 – 准备工作
-1. Power off your console
+1. 将主机关机
1. 将你的 SD 卡插入到电脑
1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
1. 将 GodMode9 `.zip` 中的 `GodMode9.firm` 复制到你 SD 卡的 `/luma/payloads/` 文件夹中
@@ -65,7 +65,7 @@ These instructions will only work on consoles with a Luma3DS version of 8.0 or h
1. 移动到 `网络设置(Internet Settings)` -> `任天堂 DS 连接(Nintendo DS Connections)`,然后选择 “OK”
1. 你的主机应该会正常启动到任天堂 DS 连接设置菜单
+ 如果你的主机显示了日版的 Flipnote Studio 或黑屏亦或出现报错,则代表测试失败。
-1. Power off your console
+1. 将主机关机
##### DS 下载通信测试
1. Power on your console
@@ -73,7 +73,7 @@ These instructions will only work on consoles with a Luma3DS version of 8.0 or h
1. 选择 “Nintendo DS”
1. If your console loads into a "Download software via DS Download Play" menu, the test was successful
+ 如果你的主机显示了日版的 Flipnote Studio 或黑屏亦或出现报错,则代表测试失败。
-1. Power off your console
+1. 将主机关机
如果以上其一测试失败了,则 DS 模式、DS 下载通信和/或 DS 连接设定可能会在卸载自制固件后无法正常使用! You should [fix DS mode](troubleshooting#software-issues-on-consoles-with-custom-firmware) before continuing.
{: .notice--warning}
@@ -98,7 +98,7 @@ These instructions will only work on consoles with a Luma3DS version of 8.0 or h
1. 选择 “用户名(User Name)”
1. 如果你能够输入新的用户名,则测试成功
+ 如果键盘没有出现且主机死机或崩溃了,则测试失败
-1. Power off your console
+1. 将主机关机
如果没有进入到正常的 3DS 主菜单或系统设置/键盘不可用,则**请不要再继续做下面的步骤了!** 请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并说英文来请求支持。
{: .notice--danger}
diff --git a/_pages/zh_TW/bannerbomb3.txt b/_pages/zh_TW/bannerbomb3.txt
index a75cfed007..b6f12b92cf 100644
--- a/_pages/zh_TW/bannerbomb3.txt
+++ b/_pages/zh_TW/bannerbomb3.txt
@@ -60,6 +60,7 @@ In this section, you will copy the files needed to trigger the BannerBomb3 explo
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
+1. Reinsert your SD card into your console
1. Power on your console
1. Launch System Settings on your console
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
diff --git a/_pages/zh_TW/finalizing-setup.txt b/_pages/zh_TW/finalizing-setup.txt
index 7ea3071641..a46bf940bf 100644
--- a/_pages/zh_TW/finalizing-setup.txt
+++ b/_pages/zh_TW/finalizing-setup.txt
@@ -47,7 +47,7 @@ In this section, you will copy the files necessary to follow the rest of the ins
1. 將 SD 卡插入至電腦中
1. Copy the contents of `finalizing.zip` (`finalize`, `gm9`, and `luma`) to the root of your SD card, merging/replacing any existing folders if prompted
+ If you are using a Mac, hold the Option key while dragging the folders to the root of your SD card, then click "Merge"
-1. Insert your SD card into your console
+1. Reinsert your SD card into your console
The screenshot below indicates the minimum SD card layout that is required to follow this page. 您可能在遵循其他頁面指示中會有一些多的資料夾及檔案在您的 SD 卡中。
diff --git a/_pages/zh_TW/installing-boot9strap-(safecerthax).txt b/_pages/zh_TW/installing-boot9strap-(safecerthax).txt
index 0cdfa62ec0..c70f559f18 100644
--- a/_pages/zh_TW/installing-boot9strap-(safecerthax).txt
+++ b/_pages/zh_TW/installing-boot9strap-(safecerthax).txt
@@ -23,7 +23,7 @@ This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ens
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
-* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS .zip file)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
### 操作說明
diff --git a/_pages/zh_TW/installing-boot9strap-(soundhax).txt b/_pages/zh_TW/installing-boot9strap-(soundhax).txt
index 3257071b68..0e1edd3fea 100644
--- a/_pages/zh_TW/installing-boot9strap-(soundhax).txt
+++ b/_pages/zh_TW/installing-boot9strap-(soundhax).txt
@@ -53,8 +53,6 @@ In this section, you will copy the files needed to trigger both Soundhax and uni
In this section, you will launch Soundhax through the Nintendo 3DS Sound app, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.
-1. Reinsert your SD card into your console
-1. Power on your console
1. 啟動『任天堂 3DS 音樂(Nintendo 3DS Sound)』程式
![]({{ "/images/screenshots/soundhax-welcome.png" | absolute_url }})
diff --git a/_pages/zh_TW/installing-boot9strap-(super-skaterhax).txt b/_pages/zh_TW/installing-boot9strap-(super-skaterhax).txt
index ad7a95ef6a..44d3c8ff42 100644
--- a/_pages/zh_TW/installing-boot9strap-(super-skaterhax).txt
+++ b/_pages/zh_TW/installing-boot9strap-(super-skaterhax).txt
@@ -74,7 +74,7 @@ If you haven't already, make sure you have a working Internet connection set up
+ If any prompts appear, approve all of them
+ If your console freezes on a yellow screen, hold the POWER button until it turns off, then retry this section
+ If your console freezes on a red screen, hold the POWER button until it turns off, redo step 3 of Section II, then retry this section
- + If you get another error, try again up to 5 times, and if it still doesn't work, [follow this troubleshooting guide](troubleshooting#homebrew-launcher-super-skaterhax)
+ + If you get another error, try again up to 5 times, and if it still doesn't work, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-super-skaterhax)
1. Your console will have booted into the Homebrew Launcher
1. Launch nimdsphax from the list of homebrew
1. 如果一切成功的話,您將自動進入 SafeB9SInstaller
diff --git a/_pages/zh_TW/troubleshooting.txt b/_pages/zh_TW/troubleshooting.txt
index 37f55b4e0c..874148337b 100644
--- a/_pages/zh_TW/troubleshooting.txt
+++ b/_pages/zh_TW/troubleshooting.txt
@@ -454,14 +454,6 @@ This likely indicates that you already have custom firmware. 請先[檢查是否
{% endcapture %}
{{ compat | markdownify }}
-{% capture compat %}
-Warning #01: No Nintendo 3DS folder
-
-Your SD card does not have the `Nintendo 3DS` folder. Power on your device with your SD card inserted, then wait for the device to show a message box that says "Creating HOME Menu management information". Once the message box disappears, power off your device and try again.
-
-{% endcapture %}
-{{ compat | markdownify }}
-
{% capture compat %}
Error #02: Missing essential.exefs
@@ -516,6 +508,7 @@ Now that you have your NAND backup in a safe place:
1. 選擇『Scripts...』
1. Select "finalize"
1. Continue the script as normal
+ + The NAND backup will be automatically skipped
{% endcapture %}
{{ compat | markdownify }}
@@ -523,7 +516,7 @@ Now that you have your NAND backup in a safe place:
{% capture compat %}
Information #05: No title database
-Press (A) to create a title database, unlock SysNAND writing by entering the buttons on-screen, follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
+Press (A) to import a title database, unlock SysNAND writing by entering the buttons on-screen, then continue the script as normal.
{% endcapture %}
{{ compat | markdownify }}
@@ -548,14 +541,6 @@ If you have enough space on your SD card, your SD might be corrupted or faulty.
{% endcapture %}
{{ compat | markdownify }}
-{% capture compat %}
-Error #08: Dummy title database
-
-You didn't delete the dummy title database that was created by Error #05. Follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
-
-{% endcapture %}
-{{ compat | markdownify }}
-
{% capture compat %}
Error #09: Unsupported GodMode9 version
@@ -565,14 +550,43 @@ You are somehow running a version of GodMode9 not packaged with the script. Make
{{ compat | markdownify }}
{% capture compat %}
-Information #11: NAND backup flag detected
+Error #11: Missing donor database
-You most likely already made a NAND backup on this console. If you did not make a backup or lost access to your backup, select "1. Make Another NAND Backup". Otherwise, select "2. Skip NAND Backup".
+You did not copy everything from `finalize.zip` to the root of your SD card. Remember, your SD card should have at least these files:
+
+![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
+{: .notice--info}
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Error #12: Copy (file).db fail
+Ensure that your SD card is not [locked](/images/sdlock.png). If the SD card is not locked and you continue to get this error, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+Information #17: Duplicate NAND backup
+
+The script has detected that the Nintendo 3DS folder is missing AND that you have already made a NAND backup before. If you intend to install homebrew applications, you should do the following:
+
+1. Press (B) to cancel making another NAND backup
+1. Press (Right Shoulder) + (Start) to power off your device
+1. Copy the contents of `/gm9/backups/` to a safe location on your computer
+1. Delete `/gm9/backups/` from your SD card
+1. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card
+ + If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it
+1. Press and hold (Start), and while holding (Start), power on your console. 這將會啟動 GodMode9
+1. 按『Home』鍵以叫出主選單
+1. Select “Scripts…”
+1. Select “finalize”
+1. Follow the prompts in the script, answering any questions that you are asked
+
+{% endcapture %}
+{{ compat | markdownify }}
---