New Crowdin updates (#2019)

* New translations homebrew-launcher-(soundhax).txt (Chinese Traditional)

* New translations installing-boot9strap-(soundhax).txt (Ukrainian)

* New translations installing-boot9strap-(pichaxx).txt (Ukrainian)

* New translations installing-boot9strap-(kartdlphax).txt (Ukrainian)

* New translations homebrew-launcher-(soundhax).txt (Chinese Simplified)

* New translations updating-b9s.txt (Chinese Simplified)

* New translations flashing-ntrboot-(nds).txt (Chinese Simplified)

* New translations flashing-ntrboot-(3ds-single-system).txt (Chinese Simplified)

* New translations flashing-ntrboot-(3ds-multi-system).txt (Chinese Simplified)

* New translations installing-boot9strap-(soundhax).txt (Chinese Simplified)

* New translations installing-boot9strap-(pichaxx).txt (Chinese Simplified)

* New translations finalizing-setup.txt (Chinese Traditional)

* New translations flashing-ntrboot-(nds).txt (Vietnamese)

* New translations updating-b9s.txt (Chinese Traditional)

* New translations flashing-ntrboot-(nds).txt (Chinese Traditional)

* New translations flashing-ntrboot-(3ds-single-system).txt (Chinese Traditional)

* New translations flashing-ntrboot-(3ds-multi-system).txt (Chinese Traditional)

* New translations installing-boot9strap-(soundhax).txt (Chinese Traditional)

* New translations installing-boot9strap-(pichaxx).txt (Chinese Traditional)

* New translations installing-boot9strap-(kartdlphax).txt (Chinese Traditional)

* New translations homebrew-launcher-(soundhax).txt (Vietnamese)

* New translations finalizing-setup.txt (Vietnamese)

* New translations updating-b9s.txt (Vietnamese)

* New translations finalizing-setup.txt (Thai)

* New translations updating-b9s.txt (Thai)

* New translations updating-b9s.txt (Malay)

* New translations installing-boot9strap-(pichaxx).txt (Pirate English)

* New translations installing-boot9strap-(soundhax).txt (Pirate English)

* New translations flashing-ntrboot-(3ds-multi-system).txt (Pirate English)

* New translations flashing-ntrboot-(3ds-single-system).txt (Pirate English)

* New translations flashing-ntrboot-(nds).txt (Pirate English)

* New translations updating-b9s.txt (Pirate English)

* New translations finalizing-setup.txt (Pirate English)

* New translations homebrew-launcher-(soundhax).txt (Pirate English)

* New translations installing-boot9strap-(kartdlphax).txt (Malay)

* New translations installing-boot9strap-(pichaxx).txt (Malay)

* New translations installing-boot9strap-(soundhax).txt (Malay)

* New translations flashing-ntrboot-(3ds-multi-system).txt (Malay)

* New translations flashing-ntrboot-(3ds-single-system).txt (Malay)

* New translations flashing-ntrboot-(nds).txt (Malay)

* New translations finalizing-setup.txt (Malay)

* New translations flashing-ntrboot-(nds).txt (Thai)

* New translations finalizing-setup.txt (Croatian)

* New translations flashing-ntrboot-(3ds-single-system).txt (Thai)

* New translations flashing-ntrboot-(3ds-multi-system).txt (Thai)

* New translations installing-boot9strap-(soundhax).txt (Thai)

* New translations installing-boot9strap-(pichaxx).txt (Thai)

* New translations installing-boot9strap-(kartdlphax).txt (Thai)

* New translations homebrew-launcher-(soundhax).txt (Croatian)

* New translations updating-b9s.txt (Croatian)

* New translations homebrew-launcher-(soundhax).txt (Malay)

* New translations flashing-ntrboot-(nds).txt (Croatian)

* New translations flashing-ntrboot-(3ds-single-system).txt (Croatian)

* New translations flashing-ntrboot-(3ds-multi-system).txt (Croatian)

* New translations installing-boot9strap-(soundhax).txt (Croatian)

* New translations installing-boot9strap-(pichaxx).txt (Croatian)

* New translations installing-boot9strap-(kartdlphax).txt (Croatian)

* New translations installing-boot9strap-(kartdlphax).txt (Pirate English)

* New translations installing-boot9strap-(usm).txt (French)

* New translations installing-boot9strap-(usm).txt (Romanian)

* New translations installing-boot9strap-(usm).txt (Arabic)

* New translations installing-boot9strap-(usm).txt (Spanish)

* New translations installing-boot9strap-(usm).txt (Bulgarian)

* New translations installing-boot9strap-(usm).txt (Czech)

* New translations installing-boot9strap-(usm).txt (Catalan)

* New translations installing-boot9strap-(usm).txt (German)

* New translations installing-boot9strap-(usm).txt (Finnish)

* New translations installing-boot9strap-(usm).txt (Greek)

* New translations installing-boot9strap-(usm).txt (Hebrew)

* New translations installing-boot9strap-(usm).txt (Italian)

* New translations installing-boot9strap-(usm).txt (Hungarian)

* New translations installing-boot9strap-(usm).txt (Korean)

* New translations installing-boot9strap-(usm).txt (Japanese)

* New translations installing-boot9strap-(usm).txt (Norwegian)

* New translations installing-boot9strap-(usm).txt (Dutch)

* New translations installing-boot9strap-(usm).txt (Polish)

* New translations installing-boot9strap-(usm).txt (Russian)

* New translations installing-boot9strap-(usm).txt (Portuguese)

* New translations installing-boot9strap-(usm).txt (Swedish)

* New translations installing-boot9strap-(usm).txt (Ukrainian)

* New translations installing-boot9strap-(usm).txt (Turkish)

* New translations installing-boot9strap-(usm).txt (Chinese Simplified)

* New translations installing-boot9strap-(usm).txt (Chinese Traditional)

* New translations installing-boot9strap-(usm).txt (Vietnamese)

* New translations installing-boot9strap-(usm).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(usm).txt (Indonesian)

* New translations installing-boot9strap-(usm).txt (Thai)

* New translations installing-boot9strap-(usm).txt (Malay)

* New translations installing-boot9strap-(usm).txt (Croatian)

* New translations installing-boot9strap-(usm).txt (Pirate English)

* New translations seedminer.txt (French)

* New translations seedminer.txt (Polish)

* New translations seedminer.txt (Malay)

* New translations seedminer.txt (Croatian)

* New translations seedminer.txt (Thai)

* New translations seedminer.txt (Indonesian)

* New translations seedminer.txt (Portuguese, Brazilian)

* New translations seedminer.txt (Vietnamese)

* New translations seedminer.txt (Chinese Traditional)

* New translations seedminer.txt (Chinese Simplified)

* New translations seedminer.txt (Ukrainian)

* New translations seedminer.txt (Turkish)

* New translations seedminer.txt (Swedish)

* New translations seedminer.txt (Russian)

* New translations seedminer.txt (Portuguese)

* New translations seedminer.txt (Norwegian)

* New translations seedminer.txt (Romanian)

* New translations seedminer.txt (Dutch)

* New translations seedminer.txt (Korean)

* New translations seedminer.txt (Japanese)

* New translations seedminer.txt (Italian)

* New translations seedminer.txt (Hungarian)

* New translations seedminer.txt (Hebrew)

* New translations seedminer.txt (Finnish)

* New translations seedminer.txt (Greek)

* New translations seedminer.txt (German)

* New translations seedminer.txt (Czech)

* New translations seedminer.txt (Catalan)

* New translations seedminer.txt (Bulgarian)

* New translations seedminer.txt (Arabic)

* New translations seedminer.txt (Spanish)

* New translations seedminer.txt (Pirate English)

* New translations installing-boot9strap-(usm).txt (French)

* New translations installing-boot9strap-(usm).txt (Romanian)

* New translations installing-boot9strap-(usm).txt (Spanish)

* New translations installing-boot9strap-(usm).txt (Arabic)

* New translations installing-boot9strap-(usm).txt (Japanese)

* New translations installing-boot9strap-(usm).txt (Hungarian)

* New translations installing-boot9strap-(usm).txt (Italian)

* New translations installing-boot9strap-(usm).txt (Hebrew)

* New translations installing-boot9strap-(usm).txt (Korean)

* New translations installing-boot9strap-(usm).txt (Dutch)

* New translations installing-boot9strap-(usm).txt (Norwegian)

* New translations installing-boot9strap-(usm).txt (Bulgarian)

* New translations installing-boot9strap-(usm).txt (Catalan)

* New translations installing-boot9strap-(usm).txt (Czech)

* New translations installing-boot9strap-(usm).txt (German)

* New translations installing-boot9strap-(usm).txt (Greek)

* New translations installing-boot9strap-(usm).txt (Finnish)

* New translations installing-boot9strap-(usm).txt (Chinese Traditional)

* New translations installing-boot9strap-(usm).txt (Vietnamese)

* New translations installing-boot9strap-(usm).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(usm).txt (Chinese Simplified)

* New translations installing-boot9strap-(usm).txt (Indonesian)

* New translations installing-boot9strap-(usm).txt (Thai)

* New translations installing-boot9strap-(usm).txt (Polish)

* New translations installing-boot9strap-(usm).txt (Portuguese)

* New translations installing-boot9strap-(usm).txt (Russian)

* New translations installing-boot9strap-(usm).txt (Swedish)

* New translations installing-boot9strap-(usm).txt (Turkish)

* New translations installing-boot9strap-(usm).txt (Ukrainian)

* New translations installing-boot9strap-(usm).txt (Croatian)

* New translations installing-boot9strap-(usm).txt (Malay)

* New translations installing-boot9strap-(usm).txt (Pirate English)

* New translations installing-boot9strap-(hardmod).txt (Dutch)

* New translations updating-b9s.txt (Dutch)

* New translations installing-boot9strap-(ntrboot).txt (Dutch)

* New translations installing-boot9strap-(soundhax).txt (Dutch)

* New translations seedminer.txt (Dutch)

* New translations installing-boot9strap-(usm).txt (Dutch)

* New translations installing-boot9strap-(pichaxx).txt (Dutch)

* New translations installing-boot9strap-(kartdlphax).txt (Dutch)

* New translations a9lh-to-b9s.txt (Dutch)

* New translations homebrew-launcher-(soundhax).txt (Dutch)

* New translations finalizing-setup.txt (Dutch)

* New translations flashing-ntrboot-(nds).txt (Dutch)

* New translations flashing-ntrboot-(3ds-single-system).txt (Dutch)

* New translations flashing-ntrboot-(3ds-multi-system).txt (Dutch)

* New translations installing-boot9strap-(usm).txt (French)

* New translations installing-boot9strap-(usm).txt (Romanian)

* New translations installing-boot9strap-(usm).txt (Arabic)

* New translations installing-boot9strap-(usm).txt (Spanish)

* New translations installing-boot9strap-(usm).txt (Bulgarian)

* New translations installing-boot9strap-(usm).txt (Czech)

* New translations installing-boot9strap-(usm).txt (Catalan)

* New translations installing-boot9strap-(usm).txt (German)

* New translations installing-boot9strap-(usm).txt (Greek)

* New translations installing-boot9strap-(usm).txt (Finnish)

* New translations installing-boot9strap-(usm).txt (Hebrew)

* New translations installing-boot9strap-(usm).txt (Italian)

* New translations installing-boot9strap-(usm).txt (Hungarian)

* New translations installing-boot9strap-(usm).txt (Korean)

* New translations installing-boot9strap-(usm).txt (Japanese)

* New translations installing-boot9strap-(usm).txt (Norwegian)

* New translations installing-boot9strap-(usm).txt (Dutch)

* New translations installing-boot9strap-(usm).txt (Polish)

* New translations installing-boot9strap-(usm).txt (Portuguese)

* New translations installing-boot9strap-(usm).txt (Russian)

* New translations installing-boot9strap-(usm).txt (Swedish)

* New translations installing-boot9strap-(usm).txt (Ukrainian)

* New translations installing-boot9strap-(usm).txt (Turkish)

* New translations installing-boot9strap-(usm).txt (Chinese Simplified)

* New translations installing-boot9strap-(usm).txt (Chinese Traditional)

* New translations installing-boot9strap-(usm).txt (Vietnamese)

* New translations installing-boot9strap-(usm).txt (Indonesian)

* New translations installing-boot9strap-(usm).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(usm).txt (Thai)

* New translations installing-boot9strap-(usm).txt (Croatian)

* New translations installing-boot9strap-(usm).txt (Malay)

* New translations installing-boot9strap-(usm).txt (Pirate English)

* New translations installing-boot9strap-(usm).txt (Dutch)

* New translations finalizing-setup.txt (Italian)

* New translations installing-boot9strap-(kartdlphax).txt (Italian)

* New translations installing-boot9strap-(hardmod).txt (Italian)

* New translations a9lh-to-b9s.txt (Italian)

* New translations installing-boot9strap-(ntrboot).txt (Italian)

* New translations homebrew-launcher-(soundhax).txt (Italian)

* New translations updating-b9s.txt (Italian)

* New translations installing-boot9strap-(soundhax).txt (Italian)

* New translations installing-boot9strap-(usm).txt (Italian)

* New translations installing-boot9strap-(pichaxx).txt (Italian)

* New translations flashing-ntrboot-(nds).txt (Italian)

* New translations flashing-ntrboot-(3ds-single-system).txt (Italian)

* New translations flashing-ntrboot-(3ds-multi-system).txt (Italian)

* New translations installing-boot9strap-(usm).txt (Italian)

* New translations seedminer.txt (Italian)

* New translations installing-boot9strap-(usm).txt (Italian)

* New translations installing-boot9strap-(soundhax).txt (Japanese)

* New translations installing-boot9strap-(soundhax).txt (French)

* New translations installing-boot9strap-(soundhax).txt (Romanian)

* New translations installing-boot9strap-(soundhax).txt (Arabic)

* New translations installing-boot9strap-(soundhax).txt (Spanish)

* New translations installing-boot9strap-(soundhax).txt (Bulgarian)

* New translations installing-boot9strap-(soundhax).txt (Czech)

* New translations installing-boot9strap-(soundhax).txt (Catalan)

* New translations installing-boot9strap-(soundhax).txt (German)

* New translations installing-boot9strap-(soundhax).txt (Finnish)

* New translations installing-boot9strap-(soundhax).txt (Greek)

* New translations installing-boot9strap-(soundhax).txt (Hungarian)

* New translations installing-boot9strap-(soundhax).txt (Hebrew)

* New translations installing-boot9strap-(soundhax).txt (Italian)

* New translations installing-boot9strap-(soundhax).txt (Korean)

* New translations installing-boot9strap-(soundhax).txt (Norwegian)

* New translations installing-boot9strap-(soundhax).txt (Dutch)

* New translations installing-boot9strap-(soundhax).txt (Polish)

* New translations installing-boot9strap-(soundhax).txt (Russian)

* New translations installing-boot9strap-(soundhax).txt (Portuguese)

* New translations installing-boot9strap-(soundhax).txt (Swedish)

* New translations installing-boot9strap-(soundhax).txt (Turkish)

* New translations installing-boot9strap-(soundhax).txt (Ukrainian)

* New translations installing-boot9strap-(soundhax).txt (Chinese Traditional)

* New translations installing-boot9strap-(soundhax).txt (Chinese Simplified)

* New translations installing-boot9strap-(soundhax).txt (Vietnamese)

* New translations installing-boot9strap-(soundhax).txt (Indonesian)

* New translations installing-boot9strap-(soundhax).txt (Portuguese, Brazilian)

* New translations installing-boot9strap-(soundhax).txt (Thai)

* New translations installing-boot9strap-(soundhax).txt (Malay)

* New translations installing-boot9strap-(soundhax).txt (Croatian)

* New translations installing-boot9strap-(soundhax).txt (Pirate English)

* New translations contribute.txt (Chinese Traditional)

_pages/ar_SA/a9lh-to-b9s.txt

@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 * The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) 
 ### Instructions
 
 #### Section I - Prep Work

_pages/ar_SA/finalizing-setup.txt

@@ -167,7 +167,7 @@ Here are some key combos that you should know:
 - Holding (Select) on boot will launch the Luma3DS configuration menu.
 - Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
 - By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
 {% endcapture %}
 
 <div class="notice--info">{{ notice-6 | markdownify }}</div>

_pages/ar_SA/flashing-ntrboot-(3ds-multi-system).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 * Two 3DS family devices 
   + **The source 3DS**: the 3DS family device that is already running boot9strap
   + **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
 
 ### Instructions

_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt

@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 ### What You Need
 
 * Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/ar_SA/flashing-ntrboot-(nds).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 * Two devices 
   + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
   + **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip) 
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/ar_SA/homebrew-launcher-(soundhax).txt

@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
 * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)

_pages/ar_SA/installing-boot9strap-(hardmod).txt

@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
 ### What You Need
 
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 

_pages/ar_SA/installing-boot9strap-(kartdlphax).txt

@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
 On the **target 3DS** (the 3DS that you are trying to modify):
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 #### Section I - Prep Work (source 3DS)

_pages/ar_SA/installing-boot9strap-(ntrboot).txt

@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 * A magnet that triggers the sleep mode of your device (if using a folding style device)
 * Your ntrboot flashed flashcart
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 
 ### Instructions

_pages/ar_SA/installing-boot9strap-(pichaxx).txt

@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
   + Your SD card must be inserted in your device to install Pokémon Picross
 * Your `movable.sed` file from completing [Seedminer](seedminer)
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 

_pages/ar_SA/installing-boot9strap-(soundhax).txt

@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 1. Go to `/SDCARD`, then play "<3 nedwill 2016"
   + This may take many tries
   + If it freezes, force the console to power off by holding the power button, then try again
-  + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
 
     ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
     {: .notice--info}

_pages/ar_SA/installing-boot9strap-(usm).txt

@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 ### What You Need
 
 * Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
+
 #### Section I - Prep Work
 
 1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. Insert your SD card into your computer
 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
 1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
   + ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. When asked "Would you like to configure Internet settings?", select "Yes"
 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
   + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
 
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+  + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
 
 1. Your device should have rebooted into the Luma3DS configuration menu
   + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
   + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
 
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
 
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`

_pages/ar_SA/seedminer.txt

@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
 1. Navigate to the `Nintendo 3DS` folder on your SD card
 1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
   + Do not go inside any more folders
-  + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+  + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
 
 	![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
 	{: .notice--info}

_pages/ar_SA/updating-b9s.txt

@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
 ### What You Need
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 ### Instructions

_pages/bg_BG/a9lh-to-b9s.txt

@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 * The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) 
 ### Instructions
 
 #### Section I - Prep Work

_pages/bg_BG/finalizing-setup.txt

@@ -167,7 +167,7 @@ Here are some key combos that you should know:
 - Holding (Select) on boot will launch the Luma3DS configuration menu.
 - Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
 - By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
 {% endcapture %}
 
 <div class="notice--info">{{ notice-6 | markdownify }}</div>

_pages/bg_BG/flashing-ntrboot-(3ds-multi-system).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 * Two 3DS family devices 
   + **The source 3DS**: the 3DS family device that is already running boot9strap
   + **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
 
 ### Instructions

_pages/bg_BG/flashing-ntrboot-(3ds-single-system).txt

@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 ### What You Need
 
 * Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/bg_BG/flashing-ntrboot-(nds).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 * Two devices 
   + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
   + **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip) 
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/bg_BG/homebrew-launcher-(soundhax).txt

@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
 * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)

_pages/bg_BG/installing-boot9strap-(hardmod).txt

@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
 ### What You Need
 
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 

_pages/bg_BG/installing-boot9strap-(kartdlphax).txt

@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
 On the **target 3DS** (the 3DS that you are trying to modify):
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 #### Section I - Prep Work (source 3DS)

_pages/bg_BG/installing-boot9strap-(ntrboot).txt

@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 * A magnet that triggers the sleep mode of your device (if using a folding style device)
 * Your ntrboot flashed flashcart
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 
 ### Instructions

_pages/bg_BG/installing-boot9strap-(pichaxx).txt

@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
   + Your SD card must be inserted in your device to install Pokémon Picross
 * Your `movable.sed` file from completing [Seedminer](seedminer)
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 

_pages/bg_BG/installing-boot9strap-(soundhax).txt

@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 1. Go to `/SDCARD`, then play "<3 nedwill 2016"
   + This may take many tries
   + If it freezes, force the console to power off by holding the power button, then try again
-  + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
 
     ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
     {: .notice--info}

_pages/bg_BG/installing-boot9strap-(usm).txt

@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 ### What You Need
 
 * Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
+
 #### Section I - Prep Work
 
 1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. Insert your SD card into your computer
 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
 1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
   + ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. When asked "Would you like to configure Internet settings?", select "Yes"
 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
   + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
 
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+  + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
 
 1. Your device should have rebooted into the Luma3DS configuration menu
   + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
   + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
 
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
 
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`

_pages/bg_BG/seedminer.txt

@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
 1. Navigate to the `Nintendo 3DS` folder on your SD card
 1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
   + Do not go inside any more folders
-  + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+  + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
 
 	![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
 	{: .notice--info}

_pages/bg_BG/updating-b9s.txt

@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
 ### What You Need
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 ### Instructions

_pages/ca_ES/a9lh-to-b9s.txt

@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 * The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) 
 ### Instructions
 
 #### Section I - Prep Work

_pages/ca_ES/finalizing-setup.txt

@@ -167,7 +167,7 @@ Here are some key combos that you should know:
 - Holding (Select) on boot will launch the Luma3DS configuration menu.
 - Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
 - By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
 {% endcapture %}
 
 <div class="notice--info">{{ notice-6 | markdownify }}</div>

_pages/ca_ES/flashing-ntrboot-(3ds-multi-system).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 * Two 3DS family devices 
   + **The source 3DS**: the 3DS family device that is already running boot9strap
   + **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
 
 ### Instructions

_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt

@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 ### What You Need
 
 * Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/ca_ES/flashing-ntrboot-(nds).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 * Two devices 
   + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
   + **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip) 
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/ca_ES/homebrew-launcher-(soundhax).txt

@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
 * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)

_pages/ca_ES/installing-boot9strap-(hardmod).txt

@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
 ### What You Need
 
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 

_pages/ca_ES/installing-boot9strap-(kartdlphax).txt

@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
 On the **target 3DS** (the 3DS that you are trying to modify):
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 #### Section I - Prep Work (source 3DS)

_pages/ca_ES/installing-boot9strap-(ntrboot).txt

@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 * A magnet that triggers the sleep mode of your device (if using a folding style device)
 * Your ntrboot flashed flashcart
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 
 ### Instructions

_pages/ca_ES/installing-boot9strap-(pichaxx).txt

@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
   + Your SD card must be inserted in your device to install Pokémon Picross
 * Your `movable.sed` file from completing [Seedminer](seedminer)
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 

_pages/ca_ES/installing-boot9strap-(soundhax).txt

@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 1. Go to `/SDCARD`, then play "<3 nedwill 2016"
   + This may take many tries
   + If it freezes, force the console to power off by holding the power button, then try again
-  + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
 
     ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
     {: .notice--info}

_pages/ca_ES/installing-boot9strap-(usm).txt

@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 ### What You Need
 
 * Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
+
 #### Section I - Prep Work
 
 1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. Insert your SD card into your computer
 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
 1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
   + ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. When asked "Would you like to configure Internet settings?", select "Yes"
 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
   + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
 
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+  + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
 
 1. Your device should have rebooted into the Luma3DS configuration menu
   + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
   + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
 
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
 
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`

_pages/ca_ES/seedminer.txt

@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
 1. Navigate to the `Nintendo 3DS` folder on your SD card
 1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
   + Do not go inside any more folders
-  + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+  + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
 
 	![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
 	{: .notice--info}

_pages/ca_ES/updating-b9s.txt

@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
 ### What You Need
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 ### Instructions

_pages/cs_CZ/a9lh-to-b9s.txt

@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 * The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) 
 ### Instructions
 
 #### Section I - Prep Work

_pages/cs_CZ/finalizing-setup.txt

@@ -167,7 +167,7 @@ Here are some key combos that you should know:
 - Holding (Select) on boot will launch the Luma3DS configuration menu.
 - Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
 - By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
 {% endcapture %}
 
 <div class="notice--info">{{ notice-6 | markdownify }}</div>

_pages/cs_CZ/flashing-ntrboot-(3ds-multi-system).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 * Two 3DS family devices 
   + **The source 3DS**: the 3DS family device that is already running boot9strap
   + **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
 
 ### Instructions

_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt

@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 ### What You Need
 
 * Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/cs_CZ/flashing-ntrboot-(nds).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 * Two devices 
   + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
   + **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip) 
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/cs_CZ/homebrew-launcher-(soundhax).txt

@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
 * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)

_pages/cs_CZ/installing-boot9strap-(hardmod).txt

@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
 ### What You Need
 
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 

_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt

@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
 On the **target 3DS** (the 3DS that you are trying to modify):
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 #### Section I - Prep Work (source 3DS)

_pages/cs_CZ/installing-boot9strap-(ntrboot).txt

@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 * A magnet that triggers the sleep mode of your device (if using a folding style device)
 * Your ntrboot flashed flashcart
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 
 ### Instructions

_pages/cs_CZ/installing-boot9strap-(pichaxx).txt

@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
   + Your SD card must be inserted in your device to install Pokémon Picross
 * Your `movable.sed` file from completing [Seedminer](seedminer)
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 

_pages/cs_CZ/installing-boot9strap-(soundhax).txt

@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 1. Go to `/SDCARD`, then play "<3 nedwill 2016"
   + This may take many tries
   + If it freezes, force the console to power off by holding the power button, then try again
-  + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
 
     ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
     {: .notice--info}

_pages/cs_CZ/installing-boot9strap-(usm).txt

@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 ### What You Need
 
 * Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
+
 #### Section I - Prep Work
 
 1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. Insert your SD card into your computer
 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
 1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
   + ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. When asked "Would you like to configure Internet settings?", select "Yes"
 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
   + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
 
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+  + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
 
 1. Your device should have rebooted into the Luma3DS configuration menu
   + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
   + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
 
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
 
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`

_pages/cs_CZ/seedminer.txt

@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
 1. Navigate to the `Nintendo 3DS` folder on your SD card
 1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
   + Do not go inside any more folders
-  + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+  + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
 
 	![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
 	{: .notice--info}

_pages/cs_CZ/updating-b9s.txt

@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
 ### What You Need
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 ### Instructions

_pages/de_DE/a9lh-to-b9s.txt

@@ -29,7 +29,7 @@ Beachte, dass auf dem New 3DS die `secret_sector.bin` benötigt wird, um den arm
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 * The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) 
 ### Anleitung
 
 #### Schritt I - Vorbereitungen

_pages/de_DE/finalizing-setup.txt

@@ -167,7 +167,7 @@ Here are some key combos that you should know:
 - Holding (Select) on boot will launch the Luma3DS configuration menu.
 - Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
 - By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
 {% endcapture %}
 
 <div class="notice--info">{{ notice-6 | markdownify }}</div>

_pages/de_DE/flashing-ntrboot-(3ds-multi-system).txt

@@ -19,7 +19,7 @@ In seltenen Fällen ist kann es sein, dass während des Flashens einer gefälsch
 * Zwei 3DS Konsolen 
   + **Der Quell-3DS**: das System auf dem schon boot9strap läuft
   + **Der Ziel-3DS**: das System mit regulärer Firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
 
 ### Anleitung

_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt

@@ -16,7 +16,7 @@ In seltenen Fällen ist kann es sein, dass während des Flashens einer gefälsch
 ### Was du brauchst
 
 * Deine ntrboot kompatible Flashkarte
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Anleitung

_pages/de_DE/flashing-ntrboot-(nds).txt

@@ -19,7 +19,7 @@ In manchen seltenen Fällen ist es möglich, das während des Flashens einer gef
 * Zwei Geräte 
   + **Der Quell-NDS / -NDSL**: Der Nintendo DS oder Nintendo DS Lite, welcher mit deiner Flashkarte kompatibel ist
   + **Der Ziel-3DS**: das Gerät der 3DS-Familie mit regulärer Firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip) 
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Anleitung

_pages/de_DE/homebrew-launcher-(soundhax).txt

@@ -17,7 +17,7 @@ Stelle sicher, dass die Drahtloskommunikation deiner Konsole eingeschaltet ist,
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
 * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)

_pages/de_DE/installing-boot9strap-(hardmod).txt

@@ -19,7 +19,7 @@ Dies funktioniert auf mit New 3DS, New 2DS, Old 3DS und Old 2DS auf *allen* Vers
 ### Was du brauchst
 
 *Deine NAND-Sicherheitskopie, welche du mit Hilfe deines [Hardmods](https://gbatemp.net/threads/414498/) erstellt hast
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
   + Windows-Benutzer können die kompilierte `.exe` benutzen, während Mac und Linux-Benutzer [Python 3] (https://www.python.org/downloads/) installiert haben müssen, um die `.py` auszuführen
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 

_pages/de_DE/installing-boot9strap-(kartdlphax).txt

@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
 On the **target 3DS** (the 3DS that you are trying to modify):
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 #### Section I - Prep Work (source 3DS)

_pages/de_DE/installing-boot9strap-(ntrboot).txt

@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 * Ein Magnet, der den Standby-Modus des Geräts auslöst (wenn das Gerät zuklappbar ist)
 * Deine ntrboot geflashte Flashkarte
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 
 ### Anleitung

_pages/de_DE/installing-boot9strap-(pichaxx).txt

@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
   + Your SD card must be inserted in your device to install Pokémon Picross
 * Your `movable.sed` file from completing [Seedminer](seedminer)
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 

_pages/de_DE/installing-boot9strap-(soundhax).txt

@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 1. Gehe zu `/SDCARD` und spiele die Datei "<3 nedwill 2016" ab
   + Dies kann einige Versuche benötigen
   + If it freezes, force the console to power off by holding the power button, then try again
-  + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
 
     ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
     {: .notice--info}

_pages/de_DE/installing-boot9strap-(usm).txt

@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 ### Was du brauchst
 
 * Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
+
 #### Schritt I - Vorbereitungen
 
 1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. Stecke deine SD-Karte in deinen Computer
 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte
+1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
 1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
   + ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. When asked "Would you like to configure Internet settings?", select "Yes"
 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
   + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
 
-#### Schritt IV - Luma3DS konfigurieren
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+  + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
 
 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
   + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
   + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
 
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
 
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`

_pages/de_DE/seedminer.txt

@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
 1. Navigate to the `Nintendo 3DS` folder on your SD card
 1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
   + Do not go inside any more folders
-  + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+  + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
 
 	![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
 	{: .notice--info}

_pages/de_DE/updating-b9s.txt

@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
 ### Was du brauchst
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 ### Anleitung

_pages/el_GR/a9lh-to-b9s.txt

@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 * The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) 
 ### Instructions
 
 #### Section I - Prep Work

_pages/el_GR/finalizing-setup.txt

@@ -167,7 +167,7 @@ Here are some key combos that you should know:
 - Holding (Select) on boot will launch the Luma3DS configuration menu.
 - Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
 - By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
 {% endcapture %}
 
 <div class="notice--info">{{ notice-6 | markdownify }}</div>

_pages/el_GR/flashing-ntrboot-(3ds-multi-system).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 * Two 3DS family devices 
   + **The source 3DS**: the 3DS family device that is already running boot9strap
   + **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
 
 ### Instructions

_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt

@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 ### What You Need
 
 * Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/el_GR/flashing-ntrboot-(nds).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
 * Two devices 
   + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
   + **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip) 
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/el_GR/homebrew-launcher-(soundhax).txt

@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
 * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)

_pages/el_GR/installing-boot9strap-(hardmod).txt

@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
 ### What You Need
 
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 

_pages/el_GR/installing-boot9strap-(kartdlphax).txt

@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
 On the **target 3DS** (the 3DS that you are trying to modify):
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 #### Section I - Prep Work (source 3DS)

_pages/el_GR/installing-boot9strap-(ntrboot).txt

@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 * A magnet that triggers the sleep mode of your device (if using a folding style device)
 * Your ntrboot flashed flashcart
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 
 ### Instructions

_pages/el_GR/installing-boot9strap-(pichaxx).txt

@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
   + Your SD card must be inserted in your device to install Pokémon Picross
 * Your `movable.sed` file from completing [Seedminer](seedminer)
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 

_pages/el_GR/installing-boot9strap-(soundhax).txt

@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 1. Μεταβείτε στο `/SDCARD`, στην συνέχεια παίξτε το "<3 nedwill 2016"
   + Μπορεί να χρειαστούν αρκετές προσπάθειες
   + If it freezes, force the console to power off by holding the power button, then try again
-  + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
 
     ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
     {: .notice--info}

_pages/el_GR/installing-boot9strap-(usm).txt

@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 ### What You Need
 
 * Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
+
 #### Section I - Prep Work
 
 1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. Εισάγετε την κάρτα SD στον υπολογιστή σας
 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
 1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
   + ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. When asked "Would you like to configure Internet settings?", select "Yes"
 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
   + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
 
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+  + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
 
 1. Your device should have rebooted into the Luma3DS configuration menu
   + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
   + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
 
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
 
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`

_pages/el_GR/seedminer.txt

@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
 1. Navigate to the `Nintendo 3DS` folder on your SD card
 1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
   + Do not go inside any more folders
-  + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+  + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
 
 	![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
 	{: .notice--info}

_pages/el_GR/updating-b9s.txt

@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
 ### What You Need
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 ### Instructions

_pages/en_PT/a9lh-to-b9s.txt

@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 * The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) 
 ### Instructions
 
 #### Section I - Prep Work

_pages/en_PT/finalizing-setup.txt

@@ -167,7 +167,7 @@ Here are some key combos that you should know:
 - Holding (Select) on boot will launch the Luma3DS configuration menu.
 - Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
 - By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
 {% endcapture %}
 
 <div class="notice--info">{{ notice-6 | markdownify }}</div>

_pages/en_PT/flashing-ntrboot-(3ds-multi-system).txt

@@ -19,7 +19,7 @@ Note that in some rare cases, it may be possible fer th' flashin' process to **b
 * Two 3DS family devices 
   + **The source 3DS**: the 3DS family device that is already running boot9strap
   + **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
 
 ### Instructions

_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt

@@ -16,7 +16,7 @@ Note that in some rare cases, it may be possible fer th' flashin' process to **b
 ### What You Need
 
 * Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/en_PT/flashing-ntrboot-(nds).txt

@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible fer th' flashin' proces
 * Two devices 
   + **Th' source NDS / NDSL**: th' Nintendo DS or Nintendo DS Lite which be compatible wit' ye flashcart
   + **Th' target 3DS**: th' 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip) 
 * The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
 
 ### Instructions

_pages/en_PT/homebrew-launcher-(soundhax).txt

@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
 * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)

_pages/en_PT/installing-boot9strap-(hardmod).txt

@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
 ### What You Need
 
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 

_pages/en_PT/installing-boot9strap-(kartdlphax).txt

@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
 On the **target 3DS** (the 3DS that you are trying to modify):
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 #### Section I - Prep Work (source 3DS)

_pages/en_PT/installing-boot9strap-(ntrboot).txt

@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 * A magnet that triggers th' sleep mode 'o ye device (if ye be usin' a foldin' style one)
 * Ye ntrboot-flashed flashcart
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 
 ### Instructions

_pages/en_PT/installing-boot9strap-(pichaxx).txt

@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
   + Your SD card must be inserted in your device to install Pokémon Picross
 * Your `movable.sed` file from completing [Seedminer](seedminer)
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 

_pages/en_PT/installing-boot9strap-(soundhax).txt

@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
   + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 * The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
 
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
 1. Go to `/SDCARD`, then play "<3 nedwill 2016"
   + This may take many tries
   + If it freezes, force the console to power off by holding the power button, then try again
-  + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
 
     ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
     {: .notice--info}

_pages/en_PT/installing-boot9strap-(usm).txt

@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 ### What You Need
 
 * Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
+
 #### Section I - Prep Work
 
 1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. Insert ye SD card into ye computer
 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
   + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on th' root 'o ye SD card
+1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
 1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
   + ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
     {: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
 1. When asked "Would you like to configure Internet settings?", select "Yes"
 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
   + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
 
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+  + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
 
 1. Ye device should have rebooted into th' Luma3DS configuration menu
   + You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
   + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
   + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
 
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
 
 1. Launch System Settings on your device
 1. Navigate to `Data Management` -> `DSiWare`

_pages/en_PT/seedminer.txt

@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
 1. Navigate to the `Nintendo 3DS` folder on your SD card
 1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
   + Do not go inside any more folders
-  + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+  + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
 
 	![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
 	{: .notice--info}

_pages/en_PT/updating-b9s.txt

@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
 ### What You Need
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
 * The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
 
 ### Instructions

_pages/es_ES/a9lh-to-b9s.txt

@@ -29,7 +29,7 @@ Ten en cuenta que sólo en la New 3DS, `secret_sector.bin` es requerido para rev
 * La versión más reciente de [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) 
 * La versión v7.0.5 de [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(el archivo`.7z`)*
 * La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* La versión más reciente de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) 
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) 
 ### Instrucciones
 
 #### Sección I - Preparativos

_pages/es_ES/finalizing-setup.txt

@@ -167,7 +167,7 @@ Here are some key combos that you should know:
 - Holding (Select) on boot will launch the Luma3DS configuration menu.
 - Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
 - By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
 {% endcapture %}
 
 <div class="notice--info">{{ notice-6 | markdownify }}</div>