merge l10n

_pages/af_ZA/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/af_ZA/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/af_ZA/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/ar_SA/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/ar_SA/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/ar_SA/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/ca_ES/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/ca_ES/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/ca_ES/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/cs_CZ/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/cs_CZ/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/cs_CZ/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/da_DK/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/da_DK/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/da_DK/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/de_DE/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /de_DE/decrypt9-(homebrew-launcher).html
   + Es kann sein, dass du dafür runterscrollen musst
 8. Sobald der Vorgang beendet ist drücke (Start) um zurück zum Homebrew Menü zu gelangen
   + Dieser Vorgang benötigt eventuell mehrere Versuche
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Starte safehax aus der Liste der Anwendungen
   + Es kann sein, dass du dafür runterscrollen musst
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. Wenn der Exploit erfolgreich war, hast du jetzt Decrypt9 gestartet
 
 Weiter zu [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/de_DE/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax ist kompatibel mit den Versionen 9.0.0 bis 11.2.0 in den Regionen EUR,
 5. Starte die Nintendo 3DS Sound App
 6. Klicke dich durch alle Vogeltipps, danach schließe die App und starte sie erneut
   + Startest du SoundHax sofort würden diese Tipps bei jedem Start von Nintendo 3DS Sound auftauchen
-7. Spiele die SoundHax `.m4a` ab
-  + Hierzu wirst du wahrscheinlich mehrere Versuche benötigen
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + Wenn sich deine Konsole aufhängt, schalte sie durch langes halten des Power-Knopfes aus, und versuche es erneut
 8. Deine Konsole sollte den Homebrew Launcher laden
 

_pages/de_DE/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releas
 ##### Abschnitt II - arm9loaderhax installieren
 
 1. Stecke die SD-Karte wieder in deinen 3DS
-2. Führe diese Schritte aus, um arm9loaderhax auf deinem Gerät zu installieren:
-  + Du solltest auf 2.1.0 sein
-  Gehe zu `http://2xrsa.3ds.guide` auf deinem 3DS
-    + Wenn du die Fehlermeldung "This service is not available in your region" bekommst, benutze die Systemeinstellungen, um die Region deines Gerätes zu der Region deines NANDs zu ändern, den du mit dem 2.1.0 ctrtransfer installiert hast
-    + Wenn du weitere Fehler bekommst, [folge dieser Anleitung zur Fehlerbehebung](troubleshooting#ts_browser)
-    + Wenn du einen geglitchten Bildschirm bekommst, [folge dieser Anleitung zur Fehlerbehebung](troubleshooting#ts_safe_a9lh_screen)
-    + Wenn du einen 2DS oder New 3DS benutzt und die Internet Verbindung nicht mehr aktiviert ist, entferne die Batterie für einige Sekunden um die Verbidung wiederherzustellen
-  + Drücke (Select) für eine vollständige Installation
-  + Das Installationsprogramm wird nun arm9loaderhax auf deinem Gerät installieren (das geht sehr schnell)
-  + Schalte deine Konsole durch drücken eines beliebigen Knopfes aus
-  + Kopiere deine konsolenspezifischen `otp.bin` aus dem `/a9lh/`-Ordner auf deiner SD-Karte an einem sicheren Ort auf deinem Computer und sichere sie mehrfach an verschiedenen Orten (z.B. Onlinespeicher), dann füge deine SD-Karte wieder in deinen 3DS ein
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + Wenn du die Fehlermeldung "This service is not available in your region" bekommst, benutze die Systemeinstellungen, um die Region deines Gerätes zu der Region deines NANDs zu ändern, den du mit dem 2.1.0 ctrtransfer installiert hast
+  + Wenn du weitere Fehler bekommst, [folge dieser Anleitung zur Fehlerbehebung](troubleshooting#ts_browser)
+  + Wenn du einen geglitchten Bildschirm bekommst, [folge dieser Anleitung zur Fehlerbehebung](troubleshooting#ts_safe_a9lh_screen)
+  + Wenn du einen 2DS oder New 3DS benutzt und die Internet Verbindung nicht mehr aktiviert ist, entferne die Batterie für einige Sekunden um die Verbidung wiederherzustellen
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Abschnitt III - Luma3DS konfigurieren
 
@@ -165,7 +164,8 @@ Falls du vor dem Befolgen dieser Anleitung bereits ein EmuNAND eingerichtet hatt
 14. Starte den Homebrew Launcher vom Home-Menü
 15. Wähle "DSP Dump"
 16. Drücke (Start) zum Beenden
-17. Starte deinen 3DS während du (Start) gedrückt hälst um in Hourlgass9 zu gelangen
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Navigiere zu "SysNAND Backup/Restore" und wähle dann "Health&Safety Inject"
 20. Wähle `hs.app` (die Version, die du in Abschnitt V, Schritt 2 erstellt hast und die nicht FBI enthält) aus, drücke (A) und bestätige die Injektion
 21. Drücke im Hauptmenü (Select) um deine SD-Karte auszuwerfen

_pages/el_GR/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/el_GR/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ To Ηomebrew Launcher έχει πολλές διαφορετικές μεθόδ
 5. Εκκινήστε την εφαρμογή Nintendo 3DS Sound
 6. Προσπεράστε όλες τις πληροφορίες που θα εμφανιστούν, κλείστε την εφαρμογή κανονικά και ξανανοίξτε την
   + Η εκκίνηση του SoundHax απευθείας θα προκαλέσει την επανεμφάνιση των πληροφοριών κάθε φορά που εκκινείτε την εφαρμογή Nintendo 3DS Sound μέχρι να εκτελέσετε το παραπάνω βήμα
-7. Παίξτε το αρχείο `.m4a` του SoundHax
-  + Μπορεί να χρειαστούν αρκετές προσπάθειες
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + Εάν παγώσει, επιβάλλετε το κλείσιμο της κονσόλας κρατώντας πατημένο το κουμπί ενεργοποίησης και δοκιμάστε ξανά
 8. Η κονσόλα σας θα πρέπει να έχει φορτώσει το Homebrew Launcher
 

_pages/el_GR/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/en_PT/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/en_PT/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/en_PT/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/es_ES/9.2.0-ctrtransfer.txt

@@ -16,8 +16,7 @@ Debido a que el objetivo del ctrtransfer 9.2.0 es solucionar problemas causados
 #### Qué necesitas
 
 * La última versión de [GodMode9](https://github.com/d0k3/GodMode9/releases/)
-* La última versión de [Decrypt9WIP] 
-(https://github.com/d0k3/Decrypt9WIP/releases/latest/)
+* La última versión de [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest/)
 * La imagen ctrtransfer 9.2.0 para tu consola y región     
 *(si tu consola no corresponde a una de estas regiones, escoge la que corresponda a tu tipo de consola)*:
   +    <i class="fa fa-magnet" aria-hidden="true" title="Este es un enlace magnético. Usa un cliente torrent para descargar el archivo."></i> - [New 3DS 9.2.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:fed7bfeec0e52b42a77467cfb6ffd3e9dd2d5a70&dn=9.2.0-20E%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)   

_pages/es_ES/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /es_ES/decrypt9-(homebrew-launcher).html
   + Puede que tengas que deslizar hacia abajo para ver esta opción
 8. Cuando se haya completado, presiona (Start) para volver al Homebrew Launcher
   + Esto puede llevar varios intentos
+  + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar
 9. Inicia safehax desde la lista de homebrew
   + Puede que tengas que deslizar hacia abajo para ver esta opción
+  + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar
 10. Si el exploit ha funcionado, habrás iniciado Decryp9
 
 Continúa a [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/es_ES/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax es compatible con las versiones 9.0.0 hasta la 11.2.0 en las regiones d
 5. Inicia Nintendo 3DS Sound
 6. Ve por todos los consejos del pájaro, luego cierra la aplicación y vuélvela a abrir
   + Ejecutar SoundHax inmediátamente ocasiona que las sugerencias aparezcan en cada ejecución de Nintendo 3DS Sound hasta que hagas esto
-7. Reproduce el `.m4a` de SoundHax
-  + Esto puede llevar varios intentos
+7. Ve a `/SDCARD`, y luego reproduce "<3 nedwill 2016"
+  + Esto podría tomar varios intentos
   + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar
 8. Tu consola debería cargar el Homebrew Launcher
 

_pages/es_ES/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ Durante este proceso, también instalaremos programas como los siguientes:
 ##### Sección II - Instalar arm9loaderhax
 
 1. Reinserta tu tarjeta SD en tu 3DS
-2. Sigue los pasos para instalar arm9loaderhax en tu consola:
-  + Debes estar en 2.1.0
-  + Abre `http://2xrsa.3ds.guide` en tu 3DS
-    + Si tienes un error de "Este servicio no está disponible en tu región", usa la Configuración de la Consola para cambiar el país de tu consola por uno de la misma región que la región del NAND cuando realizaste el ctrtransfer a 2.1.0
-    + Si te sale otro error, sigue esta [guía de resolución de problemas](troubleshooting#ts_browser)
-    + Si tienes una pantalla defectuosa, sigue esta [guía de resolución de problemas](troubleshooting#ts_safe_a9lh_screen)
-    + Si estás en una 2DS o New 3DS y dejaste la comunicación inalámbrica apagada, puedes rehabilitarla sacando la batería, desconectando el cargador por varios segundos y volviendo a encender la consola
-  + Presiona (Select) para una instalación completa (Full Install)
-  + Ahora se instalará arm9loaderhax en tu consola (esto es muy rápido)
-  + Apaga tu consola presionando cualquier botón
-  + Copia el archivo `otp.bin`específico de tu consola de la carpeta `/a9lh/` en tu tarjeta SD a un lugar seguro en tu computadora y haz copias de seguridad en diferentes lugares (como en almacenamiento de archivos en la nube), luego re-inserta tu tarjeta SD a tu 3DS
+2. Debes estar en 2.1.0
+3. Ve a `http://2xrsa.3ds.guide` en tu 3DS
+  + Si tienes un error de "Este servicio no está disponible en tu región", usa la Configuración de la Consola para cambiar el país de tu consola por uno de la misma región que la región del NAND cuando realizaste el ctrtransfer a 2.1.0
+  + Si te sale otro error, sigue esta [guía de resolución de problemas](troubleshooting#ts_browser)
+  + Si tienes una pantalla defectuosa, sigue esta [guía de resolución de problemas](troubleshooting#ts_safe_a9lh_screen)
+  + Si estás en una 2DS o New 3DS y dejaste la comunicación inalámbrica apagada, puedes rehabilitarla sacando la batería, desconectando el cargador por varios segundos y volviendo a encender la consola
+4. Pulsa (Select) para una instalación completa
+5. Ahora se instalará arm9loaderhax en tu consola (esto es muy rápido)
+6. Apaga tu consola presionando cualquier botón
+7. + Copia el archivo `otp.bin`específico de tu consola de la carpeta `/a9lh/` en tu tarjeta SD a un lugar seguro en tu computadora y haz copias de seguridad en diferentes lugares (como en almacenamiento de archivos en la nube), luego re-inserta tu tarjeta SD a tu 3DS
 
 ##### Sección III - Configuración de Luma3DS
 
@@ -103,7 +102,7 @@ Durante este proceso, también instalaremos programas como los siguientes:
   + Asegúrate de iniciar manteniendo pulsado el botón antes de presionar el botón de encendido
   + Si se queda la pantalla en negro, [sigue la guía de resolución de problemas](troubleshooting#ts_sys_a9lh)   
   + Si accedes a SafeA9LHInstaller al encender, [sigue la guía de resolución de problemas](troubleshooting#ts_safe_a9lh)
-2. Presiona el botón (A) y utiliza las flechas direccionales para activar lo siguiente:    
+2. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:    
   + **"Autoboot SysNAND"**
   + **"Use SysNAND FIRM if booting with R"**
   + **"Show NAND or user string in System Settings"**
@@ -122,8 +121,8 @@ Si, antes de seguir a esta guía, ya tenías una configuración EmuNAND y deseas
 
 1. Enciende tu consola mientras presionas (Start) para entrar a Hourglass9
 2. Ve a "SysNAND Backup/Restore"
-3. Go to "SysNAND Restore (keep a9lh)"
-4. Input the key combo given, then select the NANDmin.bin`image when prompted by pressing (A)
+3. Ve a "SysNAND Restore (keep a9lh)"
+4. Ingresa la combinación de teclas dada, luego selecciona la imagen `NANDmin.bin` cuando se te pida presionando (A)
 5. Presiona (Start) para reiniciar
   + Si se te queda la pantalla en negro, [sigue el 9.2.0 ctrtransfer](9.2.0-ctrtransfer)
 6. Si tu copia de seguridad era de una versión entre 3.0.0 y 4.5.0, la consola no arrancará hasta que descargues manualmente el firmware requerido:
@@ -165,13 +164,14 @@ Si, antes de seguir a esta guía, ya tenías una configuración EmuNAND y deseas
 14. Inicia el Homebrew Launcher desde el Menú HOME
 15. Selecciona "DSP Dump"
 16. Presiona (Start) cuando se te solicite para salir
-17. Enciende tu consola mientras presionas (Start) para entrar a Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Ve a "SysNAND Backup/Restore", luego selecciona "Health&Safety Inject"
 20. Selecciona `hs.app` (el original que no contiene FBI), luego presiona (A) y confirma para inyectar
 21. Presiona (Select) en el menu principal para expulsar tu tarjeta SD
 22. Presiona (Start) para reiniciar sin la tarjeta SD
   + Encender la consola sin la tarjeta SD al menos una vez te permitirá configurar la instalación de Luma3DS basada en CTRNAND
-23. Presiona el botón (A) y utiliza las flechas direccionales para activar lo siguiente:    
+23. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:    
   + **"Show NAND or user string in System Settings"**
 24. Si estás usando una **New 3DS**, puedes *también* activar lo siguiente:
   + **"New 3DS CPU" a "Clock+L2(x)"**

_pages/fi_FI/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/fi_FI/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/fi_FI/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/fr_FR/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /fr_FR/decrypt9-(homebrew-launcher).html
   + Vous devrez peut-être descendre dans la liste pour voir cette option
 8. Lorsque le processus est terminé, appuyez sur (Start) pour retourner sur le Homebrew Launcher
   + Cela peut demander plusieurs essais
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Lancez "safehax" que vous trouverez dans la liste des homebrews
   + Vous devrez peut-être descendre dans la liste pour voir cette option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. Si l'exploit a réussi, vous devriez avoir démarré dans Decrypt9
 
 Continuez avec le [downgrade en 2.1.0 (CTRtransfer)](2.1.0-ctrtransfer)    

_pages/fr_FR/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax est compatible sur les versions comprises entre les firmware 9.0.0 et 1
 5. Lancez l'application Studio Son Nintendo 3DS
 6. Suivez le tutoriel du perroquet en entier, puis fermez l'application et relancez-la
   + Lancer SoundHax immédiatement ferait réapparaitre le tutoriel à chaque lancement du logiciel jusqu'à ce qu'il soit correctement complété
-7. Lisez le fichier SoundHax `.m4a`
-  + Cela peut nécessiter plusieurs essais
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + Si la console freeze (ne répond plus), forcez-la simplement à s'éteindre on maintenant le bouton Power, puis réessayez
 8. Votre console devrait charger le Homebrew launcher
 

_pages/fr_FR/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ Durant cette étape, nous allons également configurer les programmes suivants :
 ### Section II - Installation d’arm9loaderhax
 
 1. Réinsérez votre carte SD dans la console
-2. Suivez ces étapes pour installer arm9loaderhax sur votre console :
-  + Vous devez être en version 2.1.0
-  + Allez à la page `http://2xrsa.3ds.guide` depuis le navigateur de votre 3DS
-    + Si vous obtenez l'erreur "This service is not available in your region", réglez le pays de la console dans les paramètres de la console pour qu'il corresponde à la region de la NAND installée lors du CTRtransfer en 2.1.0
-    + Si vous rencontrez une erreur, [suivez ce guide de dépannage](troubleshooting#ts_browser)
-    + Si vous obtenez un écran glitché, suivez [ce guide de dépannage](troubleshooting#ts_safe_a9lh_screen)
-    + Si vous êtes sur une New 3DS ou 2DS et que le Wifi de la console est désactivé, vous pouvez le réactiver en enlevant la batterie et en débranchant le chargeur pendant quelques secondes puis en redémarrant la console
-  + Appuyez sur (Select) pour lancer l'installation
-  + Le programme va maintenant installer arm9loaderhax sur votre console (cette opération est très rapide)
-  + Éteignez votre console en appuyant sur n'importe quel bouton
-  + Copiez le fichier `otp.bin` spécifique à votre console se trouvant dans le dossier `/a9lh/` de votre carte SD vers un endroit sûr dans votre ordinateur et faites-en plusieurs copies à des endroits différents (comme un service de stockage de fichiers en ligne), puis réinsérez votre carte SD dans votre 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + Si vous obtenez l'erreur "This service is not available in your region", réglez le pays de la console dans les paramètres de la console pour qu'il corresponde à la region de la NAND installée lors du CTRtransfer en 2.1.0
+  + Si vous rencontrez une erreur, [suivez ce guide de dépannage](troubleshooting#ts_browser)
+  + Si vous obtenez un écran glitché, suivez [ce guide de dépannage](troubleshooting#ts_safe_a9lh_screen)
+  + Si vous êtes sur une New 3DS ou 2DS et que le Wifi de la console est désactivé, vous pouvez le réactiver en enlevant la batterie et en débranchant le chargeur pendant quelques secondes puis en redémarrant la console
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuration de Luma3DS
 
@@ -165,7 +164,8 @@ Si, avant de suivre ce guide, vous aviez déjà installé une EmuNAND et que vou
 14. Lancez le Homebrew Launcher depuis le menu principal
 15. Sélectionnez "DSP Dump"
 16. Appuyez sur (Start) lors vous y êtes invité pour quitter l'homebrew
-17. Démarrez votre console en maintenant (Start) pour lancer Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Sélectionnez "SysNAND Backup/Restore", puis "Health&Safety Inject"
 20. Sélectionnez `hs.app` (le fichier original qui ne contient pas FBI), puis appuyez sur (A) et confirmez pour l'injecter
 21. Appuyez sur (Select) sur le menu principal pour éjecter la carte SD

_pages/he_IL/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/he_IL/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/he_IL/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/hu_HU/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/hu_HU/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/hu_HU/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/it_IT/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /it_IT/decrypt9-(homebrew-launcher).html
   + Potrebbe essere necessario scorrere la lista per visualizzare l'homebrew
 8. Al completamento, premi (Start) per tornare al menu dell'Homebrew Launcher
   + Potrebbero essere necessari più tentativi
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Avvia safehax dalla lista degli homebrew disponibili
   + Potrebbe essere necessario scorrere la lista per visualizzare l'homebrew
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. Se l'exploit è andato a buon fine, si avvierà Decrypt9
 
 Prosegui con il [ctrtransfer 2.1.0](2.1.0-ctrtransfer)    

_pages/it_IT/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax è compatibile con le versioni del software comprese tra 9.0.0 e 11.2.0
 5. Avvia Sound Nintendo 3DS
 6. Scorri tutti i consigli proposti, chiudi l'applicazione normalmente, poi riaprila
   + Lanciare in questo momento SoundHax farebbe riapparire i consigli al successivo avvio di Sound Nintendo 3DS finché non viene seguita questa procedura
-7. Riproduci il file `.m4a` di SoundHax
-  + Potrebbero essere necessari più tentativi
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + Se la console dovesse bloccarsi, forzane lo spegnimento tenendo premuto il pulsante di accensione, quindi riprova
 8. La console dovrebbe ora avviare l'Homebrew Launcher
 

_pages/it_IT/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ Durante la guida verranno anche configurate le seguenti applicazioni:
 ##### Sezione II - Installazione dell'arm9loaderhax
 
 1. Reinserisci la scheda SD nel 3DS
-2. Esegui i seguenti passaggi per installare l'arm9loaderhax sulla tua console:
-  + Dovresti ora essere alla versione del software di sistema 2.1.0
-  + Vai alla pagina `http://2xrsa.3ds.guide` utilizzando il Browser Internet del tuo 3DS
-    + Se ottieni l'errore "Questo servizio non è disponibile nella tua regione", usa le Impostazioni della console per configurare la nazione in modo che corrisponda alla regione della NAND installata durante il ctrtransfer 2.1.0
-    + Se ottieni un errore diverso, [segui questa guida per risolvere il problema](troubleshooting#ts_browser)
-    + Se ottieni una schermata visivamente corrotta, [segui questa guida per risolvere il problema](troubleshooting#ts_safe_a9lh_screen)
-    + Se hai un 2DS o su un New 3DS e hai lasciato inattiva la comunicazione wireless, puoi riattivarla rimuovendo l'alimentatore e la batteria per alcuni secondi prima di accendere la console
-  + Premi (Select) per selezionare Full Install
-  + Il programma di installazione installerà l'arm9loaderhax sulla tua console (impiegherà pochi istanti)
-  + Spegni la console premendo un pulsante qualsiasi
-  + Copia il file `otp.bin`, appena estratto dalla tua console, dalla cartella `/a9lh/` nella tua scheda SD in una posizione sicura sul tuo computer e in ulteriori locazioni (come un archivio online), quindi reinserisci la scheda SD nel 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + Se ottieni l'errore "Questo servizio non è disponibile nella tua regione", usa le Impostazioni della console per configurare la nazione in modo che corrisponda alla regione della NAND installata durante il ctrtransfer 2.1.0
+  + Se ottieni un errore diverso, [segui questa guida per risolvere il problema](troubleshooting#ts_browser)
+  + Se ottieni una schermata visivamente corrotta, [segui questa guida per risolvere il problema](troubleshooting#ts_safe_a9lh_screen)
+  + Se hai un 2DS o su un New 3DS e hai lasciato inattiva la comunicazione wireless, puoi riattivarla rimuovendo l'alimentatore e la batteria per alcuni secondi prima di accendere la console
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Sezione III - Configurare Luma3DS
 

_pages/ja_JP/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/ja_JP/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/ja_JP/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/ko_KR/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /ko_KR/decrypt9-(homebrew-launcher).html
   + 이 옵션은 아래로 스크롤해야 보일 수도 있습니다.
 8. fasthax 실행에 성공하면 (Start) 버튼을 눌러 홈브류 런처로 되돌아가세요.
   + 여러 번의 시도가 필요할 수 있습니다.
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. 홈브류 목록에서 safehax를 실행하세요.
   + 이 옵션은 아래로 스크롤해야 보일 수도 있습니다.
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. 익스플로잇이 성공하면 Decrypt9이 실행됩니다.
 
 [2.1.0 ctrtransfer](2.1.0-ctrtransfer)로 이어집니다.    

_pages/ko_KR/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax는 EUR, JPN, USA, KOR 지역의 9.0.0~11.2.0 버전에서 사용이 가
 5. 닌텐도 3DS 사운드 앱을 실행하세요.
 6. 새가 나오는 도움말을 모두 살펴본 뒤, 정상적으로 앱을 닫았다가 다시 여세요.
   + 그렇지 않고 SoundHax를 바로 실행할 경우 닌텐도 3DS 사운드 앱을 열 때마다 도움말이 나옵니다.
-7. SoundHax `.m4a` 파일을 재생시키세요.
-  + 여러 번의 시도가 필요할 수 있습니다.
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + 재생중 화면이 멈출 경우 전원 버튼을 길게 눌러서 기기를 강제로 종료시킨 후 재시도 하세요.
 8. 성공하면 홈브류 런처가 실행될 것입니다.
 

_pages/ko_KR/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ arm9loaderhax를 설치하고 Luma3DS의 설정이 완료되면 백업을 복원
 ##### 섹션 II - arm9loaderhax 설치
 
 1. SD 카드를 다시 3DS에 삽입하세요.
-2. arm9loaderhax 설치과정을 진행하세요:
-  + 기기는 2.1.0 버전이어야 합니다.
-  + 기기로 `http://2xrsa.3ds.guide`에 접속하세요.
-    + "서비스 불가능 지역입니다. (This service is not available in your region)" 오류가 뜬다면 본체 설정에서 기기의 국적을 2.1.0 ctrtransfer에서 설치한 NAND의 지역에 맞게 변경하세요.
-    + 다른 오류가 뜨면 [이 문제 해결 가이드](troubleshooting#ts_browser)를 참고하세요.
-    + 화면 깨짐현상이 나타나면 [이 문제 해결 가이드](troubleshooting#ts_safe_a9lh_screen)를 참고하세요.
-    2DS 또는 뉴 3DS에서 무선 인터넷 연결을 끈 채 2.1.0 버전으로 다운그레이드했다면, 충전기와 배터리를 제거하고 몇 초 후 다시 장착하여 무선 인터넷 연결을 다시 켤 수 있습니다.
-  + (Select) 버튼을 눌러 Full Install을 하세요.
-  + arm9loaderhax 설치가 진행됩니다. (이 작업은 매우 빨리 끝납니다.)
-  + 아무 버튼을 눌러서 기기를 끄세요.
-  + SD 카드의 `/a9lh/` 폴더에서 기기 고유의 `otp.bin` 파일을 컴퓨터에 복사하고 여러 장소에 백업해두세요. (클라우드 드라이브 등) 그리고 SD 카드를 다시 3DS에 삽입하세요.
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + "서비스 불가능 지역입니다. (This service is not available in your region)" 오류가 뜬다면 본체 설정에서 기기의 국적을 2.1.0 ctrtransfer에서 설치한 NAND의 지역에 맞게 변경하세요.
+  + 다른 오류가 뜨면 [이 문제 해결 가이드](troubleshooting#ts_browser)를 참고하세요.
+  + 화면 깨짐현상이 나타나면 [이 문제 해결 가이드](troubleshooting#ts_safe_a9lh_screen)를 참고하세요.
+  2DS 또는 뉴 3DS에서 무선 인터넷 연결을 끈 채 2.1.0 버전으로 다운그레이드했다면, 충전기와 배터리를 제거하고 몇 초 후 다시 장착하여 무선 인터넷 연결을 다시 켤 수 있습니다.
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### 섹션 III - Luma3DS 설정하기
 
@@ -165,7 +164,8 @@ EmuNAND 기반의 커스텀 펌웨어의 데이터를 새 SysNAND 커스텀 펌
 14. 홈 메뉴에서 홈브류 런처를 실행하세요.
 15. "DSP Dump"를 선택하세요.
 16. 메시지가 뜨면 (Start) 버튼을 누르세요.
-17. (Start) 버튼을 누른채 기기를 부팅시켜서 Hourglass9을 실행하세요.
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. "SysNAND Backup/Restore"로 가서 "Health&Safety Inject"를 선택하세요.
 20. `hs.app` (FBI를 담고 있지 않은 원본 앱) 파일을 선택하고 (A) 버튼을 눌러 주입하세요.
 21. 메인 메뉴에서 (Select) 버튼을 누른 후 SD 카드를 빼세요.

_pages/ms_MY/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /ms_MY/decrypt9-(homebrew-launcher).html
   + Anda mungkin perlu scroll ke bawah untuk melihat pilihan ini
 8. Apabila ianya selesai, tekan (Start) untuk keluar kembali ke Homebrew Launcher
   + Mungkin memerlukan beberapa kali cubaan
+  + Jika ia beku, anda boleh memaksa power off peranti anda dengan menahan butang power, kemudian cuba lagi
 9. Lancar safehax dari senarai di homebrew
   + Anda mungkin perlu scroll ke bawah untuk melihat pilihan ini
+  + Jika ia beku, anda boleh memaksa power off peranti anda dengan menahan butang power, kemudian cuba lagi
 10. Jika eksploit berjaya, anda akan memasuki ke dalam Decrypt9
 
 Sambung ke [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/ms_MY/Homebrew-Launcher-(Soundhax).txt

@@ -25,7 +25,7 @@ SoundHax boleh digunakan untuk versi 9.0.0 hingga 11.2.0 untuk kawasan EUR, JPN,
 5. Buka Nintendo 3DS Sound
 6. Lalui semua tips burung, kemudian tutup aplikasi seperti biasa dan buka kembali
   + Melancarkan SoundHax serta-merta akan menyebabkan tips timbul setiap kali anda membuka Nintendo 3DS Sound sehingga ianya selesai
-7. Main SoundHax `.m4a`
+7. Pergi ke `/SDCARD`, kemudian mainkan "<3 nedwill 2016"
   + Mungkin memerlukan beberapa kali cubaan
   + Jika ia beku, anda boleh memaksa power off peranti anda dengan menahan butang power, kemudian cuba lagi
 8. Peranti anda sepatutnya akan membuka Homebrew Launcher

_pages/ms_MY/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ Semasa proses ini, kami juga akan memasang program-program berikut:
 ##### Seksyen II - Pemasangan arm9loaderhax
 
 1. Pasang kembali kad SD anda ke dalam 3DS
-6. Sila ikut langkah-langkah pemasangan arm9loaderhax pada peranti anda:
-  + Anda patut berada di 2.1.0
-  + Pergi ke`http://2xrsa.3ds.guide` pada 3DS anda
-    + Jika anda mendapat error "This service is not available in your region", gunakan System Settings untuk set peranti anda ke negara yang sama dengan kawasan NAND yang anda pasang pada 2.1.0 ctrtransfer
-    + Jika terdapat error, [Ikut panduan penyelesaian ini](troubleshooting#ts_browser)
-    + Jika skrin anda bermasalah, [Ikut panduan penyelesian ini](troubleshooting#ts_safe_a9lh_screen)
-    Jika anda berada pada 2DS atau New 3DS dan membiarkan Wireless Communication mati, anda boleh hidupkannya semula dengan mencabut bateri beberapa saat dan cabut charger beberapa saat kemudian hidupkan semula
-  + Tekan (Select) untuk pemasangan sepenuhnya
-  + Pemasang akan memasang arm9loaderhax pada peranti anda (prosesnya sangat cepat)
-  + Tutup peranti anda dengan menekan apa-apa butang
-  + Salin khusus peranti anda `otp.bin` dari folder `/a9lh/` pada kad SD anda ke tempat yang selamat di komputer anda dan simpannya dibeberapa lokasi (seperti simpanan fail online), kemudian masukkan semula kad SD anda kedalam 3DS
+6. Anda patut berada di 2.1.0
+3. Pergi ke`http://2xrsa.3ds.guide` pada 3DS anda
+  + Jika anda mendapat error "This service is not available in your region", gunakan System Settings untuk set peranti anda ke negara yang sama dengan kawasan NAND yang anda pasang pada 2.1.0 ctrtransfer
+  + Jika terdapat error, [Ikut panduan penyelesaian ini](troubleshooting#ts_browser)
+  + Jika skrin anda bermasalah, [Ikut panduan penyelesian ini](troubleshooting#ts_safe_a9lh_screen)
+  Jika anda berada pada 2DS atau New 3DS dan membiarkan Wireless Communication mati, anda boleh hidupkannya semula dengan mencabut bateri beberapa saat dan cabut charger beberapa saat kemudian hidupkan semula
+4. Tekan (Select) untuk pemasangan sepenuhnya
+5. Pemasang akan memasang arm9loaderhax pada peranti anda (prosesnya sangat cepat)
+6. Tutup peranti anda dengan menekan apa-apa butang
+7. Salin khusus peranti anda `otp.bin` dari folder `/a9lh/` pada kad SD anda ke tempat yang selamat di komputer anda dan simpannya dibeberapa lokasi (seperti simpanan fail online), kemudian masukkan semula kad SD anda kedalam 3DS
 
 ##### Seksyen III - Konfigurasi Luma3DS
 
@@ -122,8 +121,8 @@ Jika, sebelum anda mengikuti panduan ini, anda sudah mempunyai EmuNAND dan mahu
 
 1. Boot peranti anda sambil menahan butang (Start) untuk memasuki Hourglass9
 6. Pergi ke "SysNAND Backup/Restore"
-3. Go to "SysNAND Restore (keep a9lh)"
-4. Input the key combo given, then select the NANDmin.bin`image when prompted by pressing (A)
+3. Pergi ke "SysNAND Restore (keep a9lh)"
+4. Masukkan key combo yang diberikan, kemudian pilih NANDmin.bin`image apabila ditanya dengan menekan butang (A)
 5. Tekan (Start) untuk reboot
   + Jika anda mendapat skrin hitam, [ikuti 9.2.0 ctrtransfer](9.2.0-ctrtransfer)
 6. Jika simpanan anda sebelum ini versi antara 3.0.0 dan 4.5.0, peranti anda tidak akan boot sehingga anda memuat turun firmware secara manual:
@@ -165,7 +164,8 @@ Jika, sebelum anda mengikuti panduan ini, anda sudah mempunyai EmuNAND dan mahu
 14. Lancarkan Homebrew Launcher dari menu utama
 15. Pilih "DSP Dump"
 16. Tekan (Start) apabila ditanya untuk keluar
-17. Boot peranti anda sambil menahan butang (Start) untuk memasuki Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Pergi ke "SysNAND Backup/Restore", kemudian pilih "Health&Safety Inject"
 20. Pilih `hs.app` (asal yang tidak mempunyai FBI), kemudian tekan (A) dan pengesahan untuk suntikan
 21. Tekan (Select) di menu utama untuk keluarkan kad SD anda

_pages/nl_NL/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /nl_NL/decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + Hiervoor kunnen verschillende pogingen nodig zijn
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. Als de exploitatie succesvol was, zal u Decrypt9 hebben opgestart
 
 Ga verder naar [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/nl_NL/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatibel met versies 9.0.0 tot en met 11.2.0 in regio's EUR, JPN,
 5. Start Nintendo 3DS Sound
 6. Doorloop alle tips die de vogel je geeft, sluit en open de app daarna opnieuw
   + SoundHax onmiddellijk opstarten zou ervoor zorgen dat deze tips telkens opnieuw bij het opstarten van de Nintendo 3DS Sound app blijven voorkomen, tot de stappen afgerond zijn
-7. Start de SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/nl_NL/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ Tijdens dit proces, stellen wij ook programma's in als volgt:
 ##### Deel II - arm9loaderhax installeren
 
 1. Plaats je SD kaart opnieuw in je 3DS
-2. Doorloop de stappen om arm9loaderhax op je toestel te installeren:
-  + Je zou versie 2.1.0 moeten hebben
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + Als je de foutmelding "This service is not available in your region", krijgt, verander dan via de Systeeminstellingen het land van je toestel naar datgene van de NAND regio die je installeerde met 2.1.0 ctrtransfer
-    + Als je nog een andere foutmelding krijgt, [volg dan deze troubleshooting handleiding](troubleshooting#ts_browser)
-    + Als je een verhakkeld scherm krijgt, [volg dan deze troubleshooting handleiding](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Druk op (Select) voor een volledige installatie
-  + De installatie zal nu arm9loaderhax op je apparaat installeren (dit gaat heel snel)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + Als je de foutmelding "This service is not available in your region", krijgt, verander dan via de Systeeminstellingen het land van je toestel naar datgene van de NAND regio die je installeerde met 2.1.0 ctrtransfer
+  + Als je nog een andere foutmelding krijgt, [volg dan deze troubleshooting handleiding](troubleshooting#ts_browser)
+  + Als je een verhakkeld scherm krijgt, [volg dan deze troubleshooting handleiding](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ### Deel III - Luma3DS configureren
 
@@ -165,7 +164,8 @@ Indien je vóór het volgen van deze handleiding al een EmuNAND setup had en de
 14. Start de Homebrew Launcher app op vanuit het home menu
 15. Selecteer "DSP Dump"
 16. Druk op (Start) wanneer er gevraagd word om af te sluiten
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Ga naar "SysNAND Backup/Restore" en kies "Health&Safety Inject"
 20. Selecteer 'hs.app' (de oorspronkelijke file niet met FBI geïnjecteerd is), druk op (A) en confirm om te injecteren
 21. Druk op (Select) in het hoofdmenu om je SD-Kaart uit te werpen

_pages/no_NO/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /no_NO/decrypt9-(homebrew-launcher).html
   + Det kan hende at du må bla ned for å se dette alternativet
 8. Når den er ferdig, trykk (Start) for å gå tilbake til homebrewlauncheren
   + Dette kan ta flere forsøk
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Start safehax fra listen over homebrew
   + Det kan hende at du må bla ned for å se dette alternativet
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. Hvis exploiten var vellykket, vil du ha startet Decrypt9
 
 Fortsett til [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/no_NO/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax er kompatibel med versjonene fra 9.0.0 til og med 11.2.0 i EUR, JPN, KO
 5. Åpne Nintendo 3DS Sound
 6. Gå gjennom alle fugletipsene, og steng deretter appen normalt og åpne den på nytt
   + Starting av SoundHax med en gang vil føre til at disse tipsene kommer opp på hver eneste start av 3DS Sound til dette er gjort
-7. Spill av SoundHax `.m4a`
-  + Dette kan ta flere forsøk
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + Hvis enheten fryser, kan du tvinge den til å skru seg av ved og holde av-knappen og så prøve igjen
 8. Konsollen burde nå laste homebrewmenyen
 

_pages/no_NO/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ Under denne prossesen, vil vi også sette opp program som følgende:
 ##### Seksjon I - Installere arm9loaderhax
 
 1. Sett inn SD-kortet i konsollen
-2. Gå igjennom trinnene for å installere arm9loaderhax på enheten din:
-  + Konsollen skal være på 2.1.0
-  + Gå til 'http://2xrsa.3ds.guide' på 3DSen din
-    + Hvis du får feilmeldingen "This service is not available in your region", bruk systeminnstillingene for å sette enhetens land til å matche NAND regionen du installerte med 2.1.0 ctrtransfer
-    + Hvis du får en feilmelding, [Følg denne feilsøkingsveiledningen](troubleshooting#ts_browser)
-    + Hvis du får en glitcha skjerm, [Følg denne feilsøkingsveiledningnen](troubleshooting#ts_safe_a9lh_screen)
-    Hvis du nedgraderte til 2. 1. 0 på en 2DS eller Nye 3DS og lot trådløs kommunikasjon være avslått, kan du aktivere trådløs igjen ved å fjerne batteriet og koble fra laderen på konsollen i noen sekunder og så starte den opp igjen
-  + Trykk (Select) for Full Installasjon
-  + Installasjonsprogrammet installerer nå arm9loaderhax på enheten (dette går veldig fort)
-  + Slå konsollen av ved å trykke på en hvilken som helst knapp
-  + Kopier konsollen egen `otp.bin` fra `/a9lh/` mappen på SD-kortet til et sikkert sted på datamaskinen og også til flere plasseringer (for eksempel online fillagring), deretter sette SD-kortet inn i 3DSen din
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + Hvis du får feilmeldingen "This service is not available in your region", bruk systeminnstillingene for å sette enhetens land til å matche NAND regionen du installerte med 2.1.0 ctrtransfer
+  + Hvis du får en feilmelding, [Følg denne feilsøkingsveiledningen](troubleshooting#ts_browser)
+  + Hvis du får en glitcha skjerm, [Følg denne feilsøkingsveiledningnen](troubleshooting#ts_safe_a9lh_screen)
+  Hvis du nedgraderte til 2. 1. 0 på en 2DS eller Nye 3DS og lot trådløs kommunikasjon være avslått, kan du aktivere trådløs igjen ved å fjerne batteriet og koble fra laderen på konsollen i noen sekunder og så starte den opp igjen
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Seksjon III - Konfigurering av Luma3DS
 
@@ -165,7 +164,8 @@ Hvis du før du fulgte denne veiledningen, allerede hadde et EmuNAND oppsett og
 14. Start Homebrew Launcher fra hjem-menyen
 15. Velg "DSP Dump"
 16. Trykk (Start) når du blir bedt om å avslutte
-17. Starte enheten mens du holder (Start) til å gå inn i Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Gå til "SysNAND Backup/Restore", og velg "Health&Safety Inject"
 20. Velg `hs.app` (den originale som ikke inneholder FBI), og trykk (A) for å bekrefte injeksjon
 21. Trykk (Select) på hovedmenyen for å løse ut SD-kortet

_pages/pl_PL/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /pl_PL/decrypt9-(homebrew-launcher).html
   + Przewiń listę w dół jeśli nie widzisz tej aplikacji
 8. Kiedy aplikacja zakończy pracę, naciśnij (Start), aby wyjść z powrotem do Homebrew Launchera
   + Może to wymagać kilku prób
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Uruchom aplikację safehax na liście homebrew
   + Przewiń listę w dół jeśli nie widzisz tej aplikacji
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. Jeśli operacja zakończyła się pomyślnie, aplikacja Decrypt9 zostanie załadowana
 
 Kontynuuj do [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/pl_PL/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax jest kompatybilny z wersjami od 9.0.0 do 11.2.0 włącznie, z regionów
 5. Uruchom aplikację Nintendo 3DS Sound
 6. Przejdź przez wszystkie wskazówki od ptaszka, a następnie zamknij aplikację i otwórz ją ponownie
   + Natychmiastowe uruchomienie SoundHax'a spowoduje, że wskazówki te będą pojawiać się za każdym razem gdy uruchomisz Nintendo 3DS Sound
-7. Odtwórz plik `.m4a` SoundHax'a
-  + To może wymagać kilku prób
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + Jeśli konsola się zawiesi, przytrzymaj przycisk power aby ją wyłączyć i spróbuj ponownie
 8. Konsola powinna załadować Homebrew Launcher
 

_pages/pl_PL/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ Podczas tego procesu zainstalujemy również takie programy jak:
 ##### Sekcja II - Instalacja arm9loaderhax
 
 1. Włóż kartę SD z powrotem do konsoli
-2. Wykonaj poniższe kroki aby zainstalować arm9loaderhax na twojej konsoli:
-  + Powinieneś być na firmware 2.1.0
-  + Przejdź do `http://2xrsa.3ds.guide` na swojej konsoli
-    + Jeśli pojawi się błąd "This service is not available in your region", użyj ustawień systemowych aby zmienić region konsoli zgodnie z regionem NAND'u zainstalowanego wraz z 2.1.0 ctrtransfer
-    + Jeśli pojawi się inny błąd, [przejdź do rozwiązywania problemów](troubleshooting#ts_browser)
-    + Jeśli pojawi się zglitchowany ekran, [przejdź do rozwiązywania problemów](troubleshooting#ts_safe_a9lh_screen)
-    + Jeśli używasz 2DS lub New3DS i obniżyłeś wersję firmware do 2.1.0 z wyłączoną komunikacją bezprzewodową (Wi-Fi), możesz ją ponownie włączyć poprzez wyjęcie baterii i odłączenie ładowarki od konsoli na kilka sekund, a następnie ponowne jej uruchomienie
-  + Naciśnij (Select) aby przeprowadzić pełną instalację
-  + Instalator zainstaluje teraz arm9loaderhax na twoim urządzeniu (jest to bardzo szybkie)
-  + Wyłącz swoją konsolę, naciskając dowolny przycisk
-  + Skopiuj twój unikalny `OTP.bin` z folderu `/a9lh/` na karcie SD do bezpiecznej lokalizacji na twoim komputerze oraz wykonaj kilka jego kopii zapasowych do innych lokalizacji (np. dysku w chmurze), następnie ponownie włóż kartę SD do swojego 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + Jeśli pojawi się błąd "This service is not available in your region", użyj ustawień systemowych aby zmienić region konsoli zgodnie z regionem NAND'u zainstalowanego wraz z 2.1.0 ctrtransfer
+  + Jeśli pojawi się inny błąd, [przejdź do rozwiązywania problemów](troubleshooting#ts_browser)
+  + Jeśli pojawi się zglitchowany ekran, [przejdź do rozwiązywania problemów](troubleshooting#ts_safe_a9lh_screen)
+  + Jeśli używasz 2DS lub New3DS i obniżyłeś wersję firmware do 2.1.0 z wyłączoną komunikacją bezprzewodową (Wi-Fi), możesz ją ponownie włączyć poprzez wyjęcie baterii i odłączenie ładowarki od konsoli na kilka sekund, a następnie ponowne jej uruchomienie
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Sekcja III - Konfiguracja Luma3DS
 
@@ -165,7 +164,8 @@ Jeśli przed rozpoczęciem tej instrukcji miałeś już zainstalowaną konfigura
 14. Uruchom Homebrew Launcher z menu głównego
 15. Wybierz "DSP Dump"
 16. Naciśnij (Start) gdy zostaniesz o to poproszony, aby wyjść z DSP Dump
-17. Uruchom swoją konsolę przytrzymując jednocześnie przycisk (Start) aby uruchomić aplikację Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Przejdź do "SysNAND Backup/Restore", a następnie wybierz "Health&Safety Inject"
 20. Wybierz `hs.app` (tę oryginalną, niezawierającą FBI), następnie naciśnij (A) i potwierdź wdrożenie aplikacji
 21. Naciśnij (Select) w menu głównym Hourglass9 aby bezpiecznie wyciągnąć kartę SD

_pages/pt_BR/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /pt_BR/decrypt9-(homebrew-launcher).html
   + Você poderá ter que descer a tela para ver esta opção
 8. Quando for completado, aperte (Start) para voltar ao Homebrew Launcher
   + Isto pode levar várias tentativas
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Abra o safehax da lista de homebrews
   + Você poderá ter que descer a tela para ver esta opção
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. Se o exploit funcionar, o Decrypt9 estará aberto
 
 Continuar para a [ctrtransfer para a 2.1.0](2.1.0-ctrtransfer)    

_pages/pt_BR/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax é compatível com as versões de 9.0.0 a 11.2.0 nas regiões EUA, EUR,
 5. Abra o Som Nintendo 3DS
 6. Passe por todas os palpites dos papagaios, depois feche o aplicativo normalmente e abra-o novamente
   + Abrir o SoundHax imediatamente faria com que estes palpites aparecessem toda vez que o Som Nintendo 3DS fosse aberto até que isto fosse feito
-7. Reproduza o SoundHax `.m4a`
-  + Isto pode levar várias tentativas
+7. Vá até `/SDCARD`, depois toque "<3 nedwill 2016"
+  + Isso pode levar várias tentativas
   + Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente
 8. Seu console deve carregar o Homebrew Launcher
 

_pages/pt_BR/Installing-arm9loaderhax.txt

@@ -7,7 +7,7 @@ permalink: /pt_BR/installing-arm9loaderhax.html
 A etapa final deste guia é instalar o arm9loaderhax e configurar o Luma3DS para rodar em apenas alguns milisegundos durante a inicialização. Isso é realizado utilizando o SafeA9LHInstaller por [AuroraWright](https://github.com/AuroraWright/).
 {: .notice}
 
-Isto irá instalar o [Fork de AuroraWright](https://github.com/AuroraWright/arm9loaderhax) do arm9loaderhax.
+Isto irá instalar o [Fork da AuroraWright](https://github.com/AuroraWright/arm9loaderhax) do arm9loaderhax.
 {: .notice--info}
 
 Iremos também configurar a habilidade de rodar payloads do arm9loaderhax, nos dando a habilidade de desbrickar a nossa SysNAND de situações que normalmente brickariam o nosso aparelho ao restaurá-la de um backup.
@@ -85,17 +85,16 @@ Durante este processo, também configuramos alguns programas como os seguintes:
 ##### Seção II - Instalando arm9loaderhax
 
 1. Reinsira o seu cartão SD no 3DS
-2. Siga as etapas para instalar o arm9loaderhax em seu dispositivo:
-  + Você deve estar na versão 2.1.0
-  + Vá para `http://2xrsa.3ds.guide` no seu 3DS
-    + Se você receber o erro "This service is not available in your region", use as Configurações do Console para definir o país do dispositivo para coincidir com a região da NAND que você instalou com a ctrtransfer para a versão 2.1.0
-    + Se você receber outro erro, [siga este guia de troubleshooting](troubleshooting#ts_browser)
-    + Se você receber uma tela irregular, [siga este guia de troubleshooting](troubleshooting#ts_safe_a9lh_screen)
-    Caso você esteja em um 2DS ou New 3DS e deixou a comunicação sem fio desligada, você pode religá-la removendo a bateria e desconectando o carregador durante alguns segundos e depois ligando o console novamente
-  + Aperte (Select) para realizar a instalação completa
-  + O instalador instalará o arm9loaderhax no seu dispositivo (isso é muito rápido)
-  + Desligue seu console apertando qualquer botão
-  + Copie o `otp.bin` específico do seu console da pasta `/a9lh/` do seu cartão SD para um lugar seguro em seu computador e faça backup em vários lugares (como armazenamento online), e então reinsira o cartão SD no seu 3DS
+2. Você deve estar na 2.1.0
+3. Visite `http://2xrsa.3ds.guide` no navegador do seu 3DS
+  + Se você receber o erro "This service is not available in your region", use as Configurações do Console para definir o país do dispositivo para coincidir com a região da NAND que você instalou com a ctrtransfer para a versão 2.1.0
+  + Se você receber outro erro, [siga este guia de troubleshooting](troubleshooting#ts_browser)
+  + Se você receber uma tela irregular, [siga este guia de troubleshooting](troubleshooting#ts_safe_a9lh_screen)
+  Caso você esteja em um 2DS ou New 3DS e deixou a comunicação sem fio desligada, você pode religá-la removendo a bateria e desconectando o carregador durante alguns segundos e depois ligando o console novamente
+4. Press (Select) to Full Install
+5. O instalador irá instalar o arm9loaderhax no seu dispositivo (isto é bem rápido)
+6. Desligue o seu console apertando qualquer botão
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Seção III - Configurando Luma3DS
 
@@ -122,8 +121,8 @@ Se, antes de seguir este guia, você já tinha uma configuração EmuNAND e gost
 
 1. Inicialize seu dispositivo enquanto segura (Start) para iniciar o Hourglass9
 2. Vá para "SysNAND Backup/Restore"
-3. Go to "SysNAND Restore (keep a9lh)"
-4. Input the key combo given, then select the NANDmin.bin`image when prompted by pressing (A)
+3. Vá para "SysNAND Restore (keep a9lh)"
+4. Aperte a combinação de botões dada e, depois quando solicitado, selecione a imagem `NANDmin.bin` apertando (A)
 5. Aperte (Start) para reiniciar
   + Se você receber uma tela preta, [siga ctrtransfer para a 9.2.0](9.2.0-ctrtransfer)
 6. Se o seu backup era de uma versão entre 3.0.0 e 4.5.0, o console não ligará completamente até que você faça o download manual do firmware necessário:
@@ -165,7 +164,8 @@ Se, antes de seguir este guia, você já tinha uma configuração EmuNAND e gost
 14. Abra o Homebrew Launcher pelo menu HOME
 15. Selecione "DSP Dump"
 16. Aperte (Start) quando solicitado para sair
-17. Inicialize seu dispositivo enquanto segura (Start) para iniciar o Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Vá para "SysNAND Backup/Restore", e então selecione "Health&Safety Inject"
 20. Selecione `hs.app` (o original que não contém o FBI), e então aperte (A) para confirmar a injeção
 21. Aperte (Select) no menu principal para ejetar seu cartão SD

_pages/pt_PT/Decrypt9-(Homebrew-Launcher).txt

@@ -24,8 +24,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/pt_PT/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax é compatível com as versões 9.0.0 até à 11.2.0 nas regiões EUR, J
 5. Abre a aplicação Som Nintendo 3DS
 6. Passa todas as dicas do pássaro, e depois fecha a aplicação normalmente e abre-a outra vez
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + Isto poderá levar várias tentativas
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. A tua consola deverá carregar o Homebrew Launcher
 

_pages/pt_PT/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/ro_RO/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /ro_RO/decrypt9-(homebrew-launcher).html
   + Ar trebuii să derulați în jos pentru a vedea opțiunea
 8. Odată ce s-a terminat, apăsați (Start) pentru a ieși înapoi în Homebrew Launcher
   + Aceasta ar putea necesita mai multe încercări
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Lansați safehax din lista de homebrew
   + Ar trebuii să derulați în jos pentru a vedea opțiunea
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. Dacă exploatarea a avut loc cu succes, ar trebui să fiți în Decrypt9 acum
 
 Continuati la [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/ro_RO/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax este compatibil cu versiunile 9.0.0 până la 11.2.0 în regiunile EUR,
 5. Lansați Nintendo 3DS Sound
 6. Treceți prin toate sfaturile păsării, apoi închideți aplicația și redeschideți-o
   + Lansând SoundHax imediat ar cauza ca aceste sfaturi să apăra de fiecare data când lansați Nintendo 3DS Sound până când faceți asta
-7. Rulați fișierul soundhax `.m4a`
-  + Aceasta ar putea necesita mai multe încercări
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + Dacă se blochează, închideți consola forțat ținând apăsat butonul de Power și încercați din nou
 8. Consola dumneavoastră ar trebui să încarce meniul homebrew
 

_pages/ro_RO/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -122,15 +121,16 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 1. Boot your device while holding (Start) to enter Hourglass9
 2. Go to "SysNAND Backup/Restore"
-3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin`
-4. Press (Start) to reboot
+3. Go to "SysNAND Restore (keep a9lh)"
+4. Input the key combo given, then select the NANDmin.bin`image when prompted by pressing (A)
+5. Press (Start) to reboot
   + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer)
 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware:
   + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
   + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
   + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
   + Delete both of these files after updating your 3DS
-6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
   + Updates while using A9LH + Luma (what you have) are safe, stop asking about it
   + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   + If this gives you an error, set your DNS settings to "auto"
@@ -164,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/ru_RU/9.2.0-ctrtransfer.txt

@@ -60,7 +60,7 @@ permalink: /ru_RU/9.2.0-ctrtransfer.html
 7. Удалите файлы образа 9.2.0 ctrtransfer `.bin` и `.bin.sha` из папки `/files9/` на SD-карте
 8. Вставьте SD-карту обратно в 3DS
 9. Нажмите (Start) для перезагрузки
-10. Обновите прошивку 3DS, зайдя в Системные настройки, затем "Прочие настройки" (Other Settings), затем листайте вправо до конца и выберите пункт "Обновление" ("System Update")
+10. Обновите прошивку 3DS, зайдя в Системные настройки, затем "Прочие настройки" (Other Settings), затем листайте вправо до конца и выберите пункт "Обновление" (System Update)
   + Обновление консоли с установленным A9LH + Luma (который стоит у вас) безопасно, прекратите переспрашивать
   + При появлении ошибки, поставьте в настройках подключения, в настройках DNS "Получать DNS автоматически" в положение "Да"
 

_pages/ru_RU/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /ru_RU/decrypt9-(homebrew-launcher).html
   + Вам может потребоваться пролистать список вниз, чтобы увидеть нужный пункт
 8. После завершения нажмите (Start), чтобы вернуться в Homebrew launcher
   + Может потребоваться несколько попыток
+  + При зависании отключите питание консоли, зажав кнопку питания, и попробуйте снова
 9. Выберите safehax в списке homebrew
   + Вам может потребоваться пролистать список вниз, чтобы увидеть нужный пункт
+  + При зависании отключите питание консоли, зажав кнопку питания, и попробуйте снова
 10. Если эксплойт сработал верно, запустится Decrypt9
 
 Следующий шаг: [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/ru_RU/Get-Started-(New-3DS).txt

@@ -24,7 +24,7 @@ permalink: /ru_RU/get-started-(new-3ds).html
 {: .notice--warning}
 {:/comment}
 
-Для всех версий вы также можете использовать Обновление системы (System Settings), чтобы обновиться до последней версии и продолжить следовать этому руководству.
+Для всех версий вы также можете использовать Обновление системы (System Update), чтобы обновиться до последней версии и продолжить следовать этому руководству.
 {: .notice--warning}
 
 {::comment}

_pages/ru_RU/Homebrew-Launcher-(Soundhax).txt

@@ -25,7 +25,7 @@ SoundHax совместим с версиями прошивки от 9.0.0 до
 5. Запустите приложение Звук Nintendo 3DS (Nintendo 3DS Sound)
 6. Пролистайте все сообщения говорящего попугая, закройте приложение и запустите снова
   + Если запустить Soundhax сразу, без закрытия, то птичка будет появляться при каждом запуске программы, до тех пор, пока вы не выполните этот пункт
-7. Начните воспроизведение SoundHax `.m4a`
+7. Перейдите в `/SDCARD`, затем начните воспроизведение "<3 nedwill 2016"
   + Может потребоваться несколько попыток
   + При зависании отключите питание консоли, зажав кнопку питания, и попробуйте снова
 8. Консоль должна загрузиться в Homebrew Launcher

_pages/ru_RU/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ permalink: /ru_RU/installing-arm9loaderhax.html
 ##### Часть II - Установка arm9loaderhax
 
 1. Вставьте SD-карту обратно в 3DS
-2. Установите arm9loaderhax на консоль, следуя инструкции:
-  + Необходимо находиться на прошивке 2.1.0
-  + Откройте `http://2xrsa.3ds.guide` в браузере 3DS
-    + Если появляется ошибка "This service is not available in your region", поменяйте регион в Системных настройках (System Settings) на соответствующий тому, который был установлен при 2.1.0 ctrtransfer
-    + При возникновении другой ошибки, обратитесь к разделу [Проблемы и их решения](troubleshooting#ts_browser)
-    + Если на экране видны искажения, обратитесь к разделу [Проблемы и их решения](troubleshooting#ts_safe_a9lh_screen)
-    + Если вы забыли включить Wi-Fi на 2DS или New 3DS, это можно сделать, вытащив батарею и отключив зарядное устройство на несколько секунд, а затем снова включить консоль
-  + Нажмите (Select) для установки
-  + Установщик поставит arm9loaderhax на вашу консоль (буквально за секунду)
-  + Нажмите любую кнопку для выключения консоли
-  + Скопируйте уникальный для вашей консоли файл `otp.bin` из папки `/a9lh/` на SD-карте в надежное место на вашем компьютере и сделайте несколько резервных копий в нескольких местах (например, облачное хранилище), вставьте SD-карту обратно в 3DS
+2. Необходимо находиться на прошивке 2.1.0
+3. Откройте `http://2xrsa.3ds.guide` в браузере 3DS
+  + Если появляется ошибка "This service is not available in your region", поменяйте регион в Системных настройках (System Settings) на соответствующий тому, который был установлен при 2.1.0 ctrtransfer
+  + При возникновении другой ошибки, обратитесь к разделу [Проблемы и их решения](troubleshooting#ts_browser)
+  + Если на экране видны искажения, обратитесь к разделу [Проблемы и их решения](troubleshooting#ts_safe_a9lh_screen)
+  + Если вы забыли включить Wi-Fi на 2DS или New 3DS, это можно сделать, вытащив батарею и отключив зарядное устройство на несколько секунд, а затем снова включить консоль
+4. Нажмите (Select) для установки
+5. Установщик поставит arm9loaderhax на вашу консоль (буквально за секунду)
+6. Нажмите любую кнопку для выключения консоли
+7. Скопируйте уникальный для вашей консоли файл `otp.bin` из папки `/a9lh/` на SD-карте в надежное место на вашем компьютере и сделайте несколько резервных копий в нескольких местах (например, облачное хранилище), вставьте SD-карту обратно в 3DS
 
 ##### Часть III - Настройка Luma3DS
 
@@ -122,8 +121,8 @@ permalink: /ru_RU/installing-arm9loaderhax.html
 
 1. Включите вашу консоль, зажав кнопку (Start), чтобы запустить Hourglass9
 2. Перейдите в "SysNAND Backup/Restore"
-3. Go to "SysNAND Restore (keep a9lh)"
-4. Input the key combo given, then select the NANDmin.bin`image when prompted by pressing (A)
+3. Перейдите в "SysNAND Restore (keep a9lh)"
+4. Введите комбинацию кнопок, указанную на экране, затем выберите образ `NANDmin.bin` и нажмите (A)
 5. Нажмите (Start) для перезагрузки
   + Если после запуска экран чёрный, выполняйте инструкции из раздела [9.2.0 ctrtransfer](9.2.0-ctrtransfer)
 6. Если ваш бэкап был сделан на прошивках от 3.0.0 до 4.5.0, консоль не запустится до тех пор, пока вы вручную не скачаете нужные файлы прошивки:
@@ -131,7 +130,7 @@ permalink: /ru_RU/installing-arm9loaderhax.html
   + Скачайте [этот файл](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
   + Скопируйте `firmware.bin` и `cetk` в папку `/luma/` на SD-карте
   + После обновления прошивки на 3DS удалите оба этих файла
-7. Обновите прошивку 3DS. Для этого зайдите в Системные настройки, затем "Прочие настройки" (Other Settings), листайте вправо до тех пор, пока не дойдете до предпоследнего пункта - Обновление ("System Update")
+7. Обновите прошивку 3DS, зайдя в Системные настройки, затем "Прочие настройки" (Other Settings), затем листайте вправо до конца и выберите пункт "Обновление" (System Update)
   + Обновление консоли с установленным A9LH + Luma (который стоит у вас) безопасно, прекратите переспрашивать
   + Запрет на обновление New 3DS с прошивкой 2.1.0 не действует после восстановления бэкапа.
   + При появлении ошибки, поставьте в настройках подключения, в настройках DNS "Получать DNS автоматически" в положение "Да"
@@ -165,7 +164,8 @@ permalink: /ru_RU/installing-arm9loaderhax.html
 14. Запустите Homebrew Launcher из меню HOME
 15. Выберите "DSP Dump"
 16. После завершения нажмите (Start) для выхода
-17. Включите вашу консоль, зажав кнопку (Start), чтобы запустить Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Перейдите в "SysNAND Backup/Restore", затем "Health&Safety Inject"
 20. Выберите `hs.app` (оригинальный файл, не содержащий FBI), нажмите (A) для подтверждения
 21. Нажмите (Select) в главном меню Hourglass9, чтобы извлечь SD-карту

_pages/ru_RU/NTR-and-Cubic-Ninja.txt

@@ -58,7 +58,7 @@ permalink: /ru_RU/ntr-and-cubic-ninja.html
     + `write(0x15E424, tuple(map(ord, "http://YYY.YYY.YYY.YYY/update.php\0")), pid=0x25)`
     + `write(0x15E0EC, tuple(map(ord, "http://YYY.YYY.YYY.YYY/update.php\0")), pid=0x25)`
     + `write(0x15E463, tuple(map(ord, "http://YYY.YYY.YYY.YYY/update.php\0")), pid=0x25)`
-11. Обновите прошивку 3DS. Для этого зайдите в Системные настройки (System Settings), "Прочие настройки" (Other Settings), листайте вправо до тех пор, пока не дойдете до предпоследнего пункта - Обновление ("System Update")
+11. Обновите прошивку 3DS, зайдя в Системные настройки, затем "Прочие настройки" (Other Settings), затем листайте вправо до конца и выберите пункт "Обновление" (System Update)
 
 ___
 

_pages/sr_SP/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/sr_SP/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/sr_SP/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -165,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/sv_SE/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/sv_SE/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/sv_SE/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 

_pages/tr_TR/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /tr_TR/decrypt9-(homebrew-launcher).html
   + Eğer programı göremiyorsanız aşağıya doğru kaydırın. Program orada olabilir
 8. Tamamlandıktan sonra Homebrew Launcher'a geri dönmek için (Start) tuşuna basın
   + Bu birkaç deneme alabilir
+  + Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin
 9. Homebrew listesinden safehax'i başlatın
   + Eğer programı göremiyorsanız aşağıya doğru kaydırın. Program orada olabilir
+  + Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin
 10. Açıktan yararlanma başarılı olduysa, Decrypt9 başlaycaktır
 
 Devam [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/tr_TR/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ Soundhax; EUR, JPN, KOR ve USA bölge cihazlarda 9.0.0,'dan 11.2.0'a kadar olan
 5. Cihazınızdan Nintendo 3DS Sound uygulamasını çalıştırın
 6. Kuş tavsiyelerini geçtikten sonra, aplikasyonu normal şekilde kapatın ve tekrar açın
   + SoundHax'i hemen açmak, bu bitene kadar Nintendo 3DS Sound'un her açılışında tavsiyelerin çıkmasına sebep olur
-7. SoundHax `.m4a`dosyasını oynatın
-  + Bu birkaç deneme alabilir
+7. `/SDCARD` gidin, "<3 nedwill 2016" dosyasını oynatın
+  + Bir kaç kere denemeniz gerekebilir
   + Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin
 8. Konsolunuz Homebrew Launcher'ı yüklemiş olmalı
 

_pages/tr_TR/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz:
 ##### Bölüm II - arm9loaderhax yükleme
 
 1. SD kartınızı cihazınıza tekrar takın
-2. Cihazınıza arm9loaderhax kurmak için bu adımları uygulayın:
-  + 2.1.0 versiyonunda olmalısınız
-  + 3DS'nizde `http://2xrsa.3ds.guide` sitesine gidin
-    + "Bu servis bölgenizde mevcut değil" hatası alırsanız, cihazınızın ülkesini, 2.1.0 ctrtransfer ile yüklediğiniz NAND bölge ile eşleşecek şekilde ayarlamak için Sistem Ayarları'nı kullanın
-    Eğer hata alırsanız.[bu sorun giderme rehberini takip edin](troubleshooting#ts_browser)
-    + Ekranınızda glitch oluşursa, [bu rehberi takip edin](troubleshooting#ts_safe_a9lh_screen)
-    Eğer 2DS veya New 3DS kullanıyorsanız ve Wi-Fi'yi kapalı bıraktıysanız, tekrar açmak için pili çıkartıp ve fişten çekerek biraz bekleyin sonrasında tekrar başlatın
-  + Tam kurulum için (Select) düğmesine basın
-  Yükleyici şimdi cihazınıza arm9loaderhax yükleyecek (bu çok hızlıdır)
-  Herhangi bir butona basarak konsolu kapatın
-  + Konsolunuza özgü `OTP.bin 'dosyasını SD kartınızdaki' / a9lh /` klasöründen bilgisayarınızdaki güvenli bir yere kopyalayın ve birden fazla yere (çevrimiçi dosya saklama alanı gibi) yedekleyin, ardından SD kartınızı tekrar cihazınıza takın
+2. 2.1.0 versiyonunda olmalısınız
+3. 3DS'nizde `http://2xrsa.3ds.guide` sitesine gidin
+  + "Bu servis bölgenizde mevcut değil" hatası alırsanız, cihazınızın ülkesini, 2.1.0 ctrtransfer ile yüklediğiniz NAND bölge ile eşleşecek şekilde ayarlamak için Sistem Ayarları'nı kullanın
+  Eğer hata alırsanız.[bu sorun giderme rehberini takip edin](troubleshooting#ts_browser)
+  + Ekranınızda glitch oluşursa, [bu rehberi takip edin](troubleshooting#ts_safe_a9lh_screen)
+  Eğer 2DS veya New 3DS kullanıyorsanız ve Wi-Fi'yi kapalı bıraktıysanız, tekrar açmak için pili çıkartıp ve fişten çekerek biraz bekleyin sonrasında tekrar başlatın
+4. Tam kurulum için (Select) düğmesine basın
+5. Yükleyici şimdi cihazınıza arm9loaderhax yükleyecek (bu çok hızlıdır)
+6. Herhangi bir butona basarak konsolu kapatın
+7. Konsolunuza özgü `OTP.bin 'dosyasını SD kartınızdaki' / a9lh /` klasöründen bilgisayarınızdaki güvenli bir yere kopyalayın ve birden fazla yere (çevrimiçi dosya saklama alanı gibi) yedekleyin, ardından SD kartınızı tekrar cihazınıza takın
 
 ##### Bölüm III - Luma3DS yapılandırma
 
@@ -122,8 +121,8 @@ Bu rehberi takip etmeden önce eğer zaten bir EmuNAND kurduysanız ve EmuNAND i
 
 1. Hourglass9'a girmek için konsolu açarken (Start) basılı tutun
 2. "SysNAND Backup/Restore" gidin
-3. Go to "SysNAND Restore (keep a9lh)"
-4. Input the key combo given, then select the NANDmin.bin`image when prompted by pressing (A)
+3. "SysNAND Restore (keep a9lh)" gidin
+4. Gösterilen tuş kombosunu girin ve `NANDmin.bin` imaj dosyasını (A)'ya basarak seçin
 5. Start'a basarak yeniden başlatın
   + Eğer siyah ekran alırsanız, [9.2.0 ctrtransfer takip edin](9.2.0-ctrtransfer)
 6. Yedek versiyonunuz 3.0.0 ve 4.5.0 arasındaysa konsolunuz siz gerekli firmware'i manuel olarak indirene kadar başlamaz:
@@ -165,7 +164,8 @@ Bu rehberi takip etmeden önce eğer zaten bir EmuNAND kurduysanız ve EmuNAND i
 14. Ana menüden Homebrew Launcher'ı başlatın
 15. "DSP dump" seçin
 16. Çıkmak isteyip istemediğiniz sorulduğunda (Start) tuşuna basın
-17. Hourglass9'a girmek için konsolu açarken (Start) basılı tutun
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. "SysNAND Backup/Restore" gidin ve daha sonra "Health&Safety Inject" seçin
 20. 'hs.app' (orijinal olanı FBI içermez) seçin ve (A) tuşuna basın ve enjekte etmek için onaylayın
 21. Ana menüdeyken SD kartı çıkarmak için (Select) basın

_pages/uk_UA/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/uk_UA/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/uk_UA/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -122,15 +121,16 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 1. Boot your device while holding (Start) to enter Hourglass9
 2. Go to "SysNAND Backup/Restore"
-3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin`
-4. Press (Start) to reboot
+3. Go to "SysNAND Restore (keep a9lh)"
+4. Input the key combo given, then select the NANDmin.bin`image when prompted by pressing (A)
+5. Press (Start) to reboot
   + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer)
 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware:
   + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
   + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
   + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
   + Delete both of these files after updating your 3DS
-6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
   + Updates while using A9LH + Luma (what you have) are safe, stop asking about it
   + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   + If this gives you an error, set your DNS settings to "auto"
@@ -164,7 +164,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 14. Launch the Homebrew Launcher from the home menu
 15. Select "DSP Dump"
 16. Press (Start) when prompted to exit
-17. Boot your device while holding (Start) to enter Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
 20. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
 21. Press (Select) on the main menu to eject your SD card

_pages/vi_VN/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /decrypt9-(homebrew-launcher).html
   + You may have to scroll down to see this option
 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher
   + This may take several tries
+  + If it freezes, just force the console to power off by holding the power button, then try again
 9. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
+  + If it freezes, just force the console to power off by holding the power button, then try again
 10. If the exploit was successful, you will have booted into Decrypt9
 
 Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/vi_VN/Homebrew-Launcher-(Soundhax).txt

@@ -25,8 +25,8 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
 5. Launch Nintendo 3DS Sound
 6. Go through all of the bird tips, then close the app normally and reopen it
   + Launching SoundHax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
-7. Play the SoundHax `.m4a`
-  + This may take several tries
+7. Go to `/SDCARD`, then play "<3 nedwill 2016"
+  + This may take many tries
   + If it freezes, just force the console to power off by holding the power button, then try again
 8. Your console should load the Homebrew Launcher
 

_pages/vi_VN/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ During this process, we also setup programs such as the following:
 ##### Section II - Installing arm9loaderhax
 
 1. Reinsert your SD card into your 3DS
-2. Do the steps for installing arm9loaderhax on your device:
-  + You should be on 2.1.0
-  + Go to `http://2xrsa.3ds.guide` on your 3DS
-    + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
-    + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
-    + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
-    + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
-  + Press (Select) to Full Install
-  + The installer will now install arm9loaderhax on your device (this is very fast)
-  + Shut down your console by pressing any button
-  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
+2. You should be on 2.1.0
+3. Go to `http://2xrsa.3ds.guide` on your 3DS
+  + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+  + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+  + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+  + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+4. Press (Select) to Full Install
+5. The installer will now install arm9loaderhax on your device (this is very fast)
+6. Shut down your console by pressing any button
+7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
 
 ##### Section III - Configuring Luma3DS
 
@@ -122,15 +121,16 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 1. Boot your device while holding (Start) to enter Hourglass9
 2. Go to "SysNAND Backup/Restore"
-3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin`
-4. Press (Start) to reboot
+3. Go to "SysNAND Restore (keep a9lh)"
+4. Input the key combo given, then select the NANDmin.bin`image when prompted by pressing (A)
+5. Press (Start) to reboot
   + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer)
 6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware:
   + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
   + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
   + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
   + Delete both of these files after updating your 3DS
-6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
   + Updates while using A9LH + Luma (what you have) are safe, stop asking about it
   + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   + If this gives you an error, set your DNS settings to "auto"

_pages/zh_CN/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /zh_CN/decrypt9-(homebrew-launcher).html
   +可能需要滚动下所以你可能看到那个选项
 8. 运行结束后，按(Start)键退出，返回到自制程序启动器
   + 这一步的成功率不是100%，有可能需要反复尝试
+  + 如果直接启动，会让这些提示每次都跳出来，除非你先跳过提示，然后再正常重新启动播放程式
 9. 运行safehax
   +可能需要滚动下所以你可能看到那个选项
+  + 如果直接启动，会让这些提示每次都跳出来，除非你先跳过提示，然后再正常重新启动播放程式
 10. 如果漏洞利用成功，将会自动进入Decrypt9
 
 继续下一步 [2.1.0 ctrtransfer](2.1.0-ctrtransfer)    

_pages/zh_CN/Homebrew-Launcher-(Soundhax).txt

@@ -27,7 +27,7 @@ Request Context
 5. 运行3DS的声音软件
 6. 跳过所有的小鸟提示，正常关闭声音软件，然后重新打开声音软件
   + 如果没有关闭声音软件，直接运行SoundHax，会造成每次打开声音软件都会有小鸟提示
-7. 播放SoundHax的 `.m4a` 文件
+7. 选择 `/sdcard`，然后选择"< 3 nedwill 2016"
   + 这一步的成功率不是100%，有可能需要反复尝试
   + 如果直接启动 SoundHax，会让这些提示每次都跳出来，除非你先跳过提示，然后再正常重新启动播放程式
 8. 现在应该自动进入Homebrew Launcher

_pages/zh_CN/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ permalink: /zh_CN/installing-arm9loaderhax.html
 ##### 第二部分 - 安装 arm9loaderhax
 
 1. 将SD卡插回3DS
-2. 按照如下步骤安装arm9loaderhax：
-  + 你的系统版本应该在2.1.0
-  + 在你的3DS去到`http://2xrsa.3ds.guide`
-    + 如果出现错误：“当前服务在你的区域不可用”，请使用系统设置修改你的设备所在的国家，匹配你安装的2.1.0 ctr转移镜像所对应的NAND区域
-    + 如果出现错误，[参见这个问题排查](troubleshooting#ts_browser)
-    + 如果出现花屏，[参见这个问题排查](troubleshooting#ts_safe_a9lh_screen)
-    + 如果你的设备是新3DS或者2DS，在降级到了2.1.0系统时无线连接没有开启，你可以将充电器断开并将电池拿下来，等待数秒后再开机，即可重新开启无线连接。
-  + 按（Select）选择Full Install
-  + 安装程序将在你的设备上安装arm9loaderhax（速度很快）
-  +按任意按钮关机
-  + 从你SD卡的 `/a9lh/` 目录将你设备专属的 ` otp.bin ` 文件拷贝到你计算机上一个安全的位置，并备份到多个地方（例如在线文件存储），然后重新将SD卡插回3DS上
+2. 你的系统版本应该在2.1.0
+3. 在你的3DS去到`http://2xrsa.3ds.guide`
+  + 如果出现错误：“当前服务在你的区域不可用”，请使用系统设置修改你的设备所在的国家，匹配你安装的2.1.0 ctr转移镜像所对应的NAND区域
+  + 如果出现错误，[参见这个问题排查](troubleshooting#ts_browser)
+  + 如果出现花屏，[参见这个问题排查](troubleshooting#ts_safe_a9lh_screen)
+  + 如果你的设备是新3DS或者2DS，在降级到了2.1.0系统时无线连接没有开启，你可以将充电器断开并将电池拿下来，等待数秒后再开机，即可重新开启无线连接。
+4. 按（Select）选择Full Install
+5. 安装程序将在你的设备上安装arm9loaderhax（速度很快）
+6. 按任意按钮关机
+7. 从你SD卡的 `/a9lh/` 目录将你设备专属的 ` otp.bin ` 文件拷贝到你计算机上一个安全的位置，并备份到多个地方（例如在线文件存储），然后重新将SD卡插回3DS上
 
 ##### 第三部分 - 设置 Luma3DS
 
@@ -122,8 +121,8 @@ permalink: /zh_CN/installing-arm9loaderhax.html
 
 1. 按住(Start)键开机，通过arm9loaderhax进入Hourglass9
 2. 选择 “SysNAND Backup/Restore”
-3. Go to "SysNAND Restore (keep a9lh)"
-4. Input the key combo given, then select the NANDmin.bin`image when prompted by pressing (A)
+3. 选择"SysNAND Restore (keep a9lh)"
+4. 当提示时，输入的按键组合，并选取NANDmin.bin的镜像档
 5. 按(Start)键重启
   + 如果出现黑屏，参见[9.2.0 ctr转移](9.2.0-ctrtransfer)
 6. 如果你的备份文件系统版本在3.0.0到4.5.0，除非你下载所需的固件，否则你的设备将无法开机：
@@ -165,7 +164,8 @@ permalink: /zh_CN/installing-arm9loaderhax.html
 14. 从桌面菜单中运行Homebrew Launcher（自制程序启动器）
 15. 选择”DSP Dump”
 16. 按照提示，按(Start)键退出
-17. 按住(Start)键开机，通过arm9loaderhax进入Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. 选择”SysNAND Backup/Restore”，然后选择”Health&Safety Inject”
 20. 选择 `hs.app` (原来那个并不包含FBI的版本)，然后按(A)键确认注入
 21. 在主菜单中，按(Select)键弹出你的SD卡

_pages/zh_TW/Decrypt9-(Homebrew-Launcher).txt

@@ -22,8 +22,10 @@ permalink: /zh_TW/decrypt9-(homebrew-launcher).html
   + 你可能得往下些才會看到此選項
 8. 一旦處理完畢後，按「開始鍵 (Start)」以回到 Homebrew Launcher
   + 可能需要嘗試多次
+  + 如果當機的話，按住電源紐強制重啟你的裝置在試一次即可
 9. 於 Homebrew 清單內啟動 safehax
   + 你可能得往下些才會看到此選項
+  + 如果當機的話，按住電源紐強制重啟你的裝置在試一次即可
 10. 如果一切成功的話，你將自動進入 Decrypt9
 
 繼續至 [2.1.0 ctrtransfer](2.1.0-ctrtransfer).    

_pages/zh_TW/Homebrew-Launcher-(Soundhax).txt

@@ -25,7 +25,7 @@ SoundHax 相容於 9.0.0 至 11.2.0 的歐、日、韓及美區的系統版本
 5. 啟動音樂播放程式（Nintendo 3DS Sound）
 6. 忽略所有鳥的提示，然後重啟程式
   + 如果直接啟動 SoundHax，這些提示每次都會跳出來；除非你先跳過提示，然後再正常重新啟動播放程式
-7. 播放 SoundHax `.m4a`
+7. 選擇「/SDCARD」，並播放「<3 nedwill 2016」
   + 可能需要嘗試多次
   + 如果當機的話，按住電源紐強制重啟你的裝置在試一次即可
 8. 你的主機應該就會啟動 Homebrew Launcher 了

_pages/zh_TW/Installing-arm9loaderhax.txt

@@ -85,17 +85,16 @@ permalink: /zh_TW/installing-arm9loaderhax.html
 ##### 第二節 — 安裝 arm9loaderhax
 
 1. 將 SD 卡插回 3DS 中
-2. 按照下列步驟以安装 arm9loaderhax：
-  + 系統版本須為 2.1.0
-  + 在你的 3DS 上開啟 `http://2xrsa.3ds.guide`
-    + 如果出現錯誤「當前服務在你的區域不可用（This service is not available in your region）」，請透過系統設置改變你裝置所在的國家，使它與你使用的 2.1.0 ctrtransfer 地區相同
-    + 如果遇到其他錯誤的話， [請參見此疑難排解](troubleshooting#ts_browser)
-    + 如果螢幕花屏， [請參見此疑難排解](troubleshooting#ts_safe_a9lh_screen)
-    如果你在 2DS 或 New 3DS 上無線功能是關閉的狀態的話，只需要將電池移除並拔掉充電器數秒再重新開啟即可。
-  + 按下「選擇鍵 (Select)」以進行安裝
-  + 安裝包將安裝 arm9loaderhax 至你的裝置上（過程很快）
-  + 按任意按鈕關機
-  + 將你主機特有的 `otp.bin` 從 SD 卡 `/a9lh/` 資料夾中複製出來並備份至各個安全的地方（像是雲端硬碟），再將你的 SD 卡插回至 3DS 中
+2. 系統版本須為 2.1.0
+3. 在你的 3DS 上開啟 `http://2xrsa.3ds.guide`
+  + 如果出現錯誤「當前服務在你的區域不可用（This service is not available in your region）」，請透過系統設置改變你裝置所在的國家，使它與你使用的 2.1.0 ctrtransfer 地區相同
+  + 如果遇到其他錯誤的話， [請參見此疑難排解](troubleshooting#ts_browser)
+  + 如果螢幕花屏， [請參見此疑難排解](troubleshooting#ts_safe_a9lh_screen)
+  如果你在 2DS 或 New 3DS 上無線功能是關閉的狀態的話，只需要將電池移除並拔掉充電器數秒再重新開啟即可。
+4. 按下「選擇鍵 (Select)」以進行安裝
+5. 安裝包將安裝 arm9loaderhax 至你的裝置上（過程很快）
+6. 按任意按鈕關機
+7. 將你主機特有的 `otp.bin` 從 SD 卡 `/a9lh/` 資料夾中複製出來並備份至各個安全的地方（像是雲端硬碟），再將你的 SD 卡插回至 3DS 中
 
 ##### 第三節 — 設定 Luma3DS
 
@@ -122,8 +121,8 @@ permalink: /zh_TW/installing-arm9loaderhax.html
 
 1. 開機時，按住「開始鍵 (Start)」進入 Hourglass9
 2. 選擇 「SysNAND Backup/Restore」
-3. Go to "SysNAND Restore (keep a9lh)"
-4. Input the key combo given, then select the NANDmin.bin`image when prompted by pressing (A)
+3. 選擇「SysNAND Restore (keep a9lh)」
+4. 按照提示按按鍵，並在提示時按「A」鍵來選取 `NANDmin.bin` 的鏡像檔
 5. 按下「開始鍵 (Start)」以重啟
   + 如果黑屏，請進行[版本 9.2.0 的 ctrtransfer](9.2.0-ctrtransfer)
 6. 如果你所備份的系統版本是在 3.0.0 到 4.5.0 之間，你必須同時手動下載下列韌體，否則無法開機：
@@ -165,7 +164,8 @@ permalink: /zh_TW/installing-arm9loaderhax.html
 14. 從主選單中啟動 Homebrew Launcher
 15. 啟動「DSP Dump」
 16. 提示時，按下「開始鍵 (Start)」退出
-17. 開機時，按住「開始鍵 (Start)」進入 Hourglass9
+17. Press (Start) to open the Homebrew Launcher exit menu
+18. Press (A) while holding (Start) to reboot into Hourglass9
 19. 選擇「SysNAND Backup/Restore」中的「Health&Safety Inject」
 20. 選擇你第一次備份出來原本的 `hs.app`，按下「A」確認安裝
 21. 於主選單按下「選擇鍵 (Select)」以卸除 SD 卡