use gm9 for copying luma to ctrnand

_pages/en_US/Installing-arm9loaderhax.txt

@@ -150,19 +150,16 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
 1. Select the "Install all CIAs" option, then press (A) to confirm
-1. Return to the SD directory with (B)
+1. Press (Home) to exit FBI
-1. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option
+
-1. Return to the FBI main menu with (B)
+##### Section VII - DSP Dump
-1. Navigate to `CTR NAND`
+
-1. Select "\<current directory>"
-1. Select the "Paste" option, then press (A) to confirm
-1. Press (Home)
 1. Launch the Homebrew Launcher from the home menu
 1. Select "DSP Dump"
 1. Press (Start) when prompted to exit DSP Dump
 1. Press (Start) to launch the Homebrew Launcher exit menu
 
-##### Section VII - Restore Health and Safety
+##### Section VIII - Restore Health and Safety
 
 1. Reboot holding (Start) during boot to launch GodMode9
 1. Press (Home) to bring up the action menu
@@ -170,8 +167,16 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Select "Restore H&S"
 1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
 
-##### Section VIII - Finalizing Setup
+##### Section IX - CTRNAND Luma3DS
 
+1. Navigate to `SDCARD`
+1. Press (Y) on `arm9loaderhax.bin` to copy it
+1. Press (B) to return to the main menu
+1. Navigate to `SYSNAND CTRNAND`
+1. Press (Y) to paste `arm9loaderhax.bin`
+1. Select "Copy path(s)"
+1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
+1. Press (B) to return to the main menu
 1. Hold (R) and press (B) at the same time to eject your SD card
 1. Remove your SD card from your device
 1. Press (Start) to reboot your device with the SD card removed
@@ -200,9 +205,9 @@ This will only update the Luma3DS files on the SD card. If you boot your device
 <div class="notice--info">{{ notice-10 | markdownify }}</div>
 
 {% capture notice-6 %}   
-You will now boot a Custom Firmware based SysNAND by default.    
+You will now boot Luma3DS CFW SysNAND by default.    
 You can now hold (Select) on boot to launch the Luma3DS configuration menu.    
-You can now hold (Start) on boot to launch GodMode1.     
+You can now hold (Start) on boot to launch GodMode9.     
 {% endcapture %}
 
 <div class="notice--info">{{ notice-6 | markdownify }}</div>

_pages/en_US/Troubleshooting.txt

@@ -74,8 +74,8 @@ This is caused by Gateway implementing a very shoddy downgrade method, which lea
   + **New 3DS USA**: `20021300` -> `content`
 1. Notice that there are two sets of app and tmd files, one set with uppercase extensions (`.TMD` and `.APP`), and one set with lowercase extensions (`.tmd` and `.app`)
 1. While holding the (R) trigger, press (Y) to create a new directory
-1. Press (A) to confirm the name `newdir` (it doesn't matter what it's called)
+1. Press (A) to confirm the name `newdir` (it does not matter what the folder is called)
-1. Press (A) to unlock SysNAND writing, then input the key combo given
+1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
 1. Press the (L) trigger on each of the uppercase extension files (`.TMD` and `.APP`) to mark them
 1. Press (Y) to copy the files
 1. Navigate to `newdir`

_pages/en_US/Updating-A9LH.txt

@@ -35,6 +35,7 @@ These steps will also update your various payloads and the AES key database.
 #### Instructions
 
 **For all of these instructions, OVERWRITE any existing files on your SD card.**
+{: .notice--info}
 
 ##### Section I - Prep work
 
@@ -76,20 +77,23 @@ These steps will also update your various payloads and the AES key database.
 
 ##### Section IV - CTRNAND Luma3DS
 
-1. Launch FBI
+1. Reboot holding (Start) during boot to launch GodMode9
-1. Navigate to `SD` -> `cias`
+1. Navigate to `SDCARD`
-1. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option
+1. Press (Y) on `arm9loaderhax.bin` to copy it
-1. Return to the FBI main menu with (B)
+1. Press (B) to return to the main menu
-1. Navigate to `CTR NAND`
+1. Navigate to `SYSNAND CTRNAND`
-1. Select "\<current directory>"
+1. Press (Y) to paste `arm9loaderhax.bin`
-1. Select the "Paste" option, then press (A) to confirm
+1. Select "Copy path(s)"
-1. Press (Home) to exit FBI
+  + Overwrite any existing `arm9loaderhax.bin` if prompted
-1. Power off your device and remove the SD card
+1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
-1. Boot with the SD card removed while holding (Select)
+1. Press (B) to return to the main menu
+1. Hold (R) and press (B) at the same time to eject your SD card
+1. Remove your SD card from your device
+1. Press (Start) to reboot your device with the SD card removed
   + Booting your device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation
 1. Use the (A) button and the D-Pad to turn on the following:    
   + **"Show NAND or user string in System Settings"**
-1. If you are using a **New 3DS**, you should *also* enable the following:
+1. If you are using a **New 3DS**, you can *also* enable the following:
   + **"New 3DS CPU" to "Clock+L2(x)"**
     + This will increase the framerate of many games, but may cause instability in others
     + If some games do not work properly, disable this option and try again