Installing boot9strap (MSET9 Play Store)
Technische Details (optional)
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
Kompatibilitätshinweise
This page requires an Android phone/tablet or a Chromebook. If you have a computer running Windows, macOS, or Linux, follow Installing boot9strap (MSET9 CLI) instead. If you do not have access to any of these devices, you will need to use an alternate exploit.
On Android phones/tablets, the minimum Android version required is 6.0 (Marshmallow).
Was du brauchst
- The following applications installed from the Google Play Store:
- MSET9 Installer
- ZArchiver
- If you wish, you can sideload these applications instead
- The latest release of MSET9 (the Release
.zipfile)
Anleitung
Abschnitt I - Vorbereitungen
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
- Power on your console with your SD card inserted
- Open Mii Maker
- Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
- You may see this screen, which indicates the necessary data has been created
- If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
- Power off your console
- Insert your SD card into your phone/tablet/computer
- Copy everything from the Release
.zipto the root of your SD card, overwriting any existing files:- Open ZArchiver
- If prompted, allow ZArchiver to access files on your SD card
- Navigate to where the downloaded MSET9 Release
.zipis located (likely in the Downloads folder) - Select the Release
.zip, then select “Extract…” (image) - Navigate to your SD card, then tap the blue ‘down arrow’ icon to extract the files to the root of your SD card (image)
- Run the MSET9 Installer application
- Tap on
Select "Nintendo 3DS" Folder, then navigate to yourNintendo 3DSfolder on your SD card (image) - Once inside the
Nintendo 3DSfolder, tap on “Use this folder”, then “Allow” if asked (image) - If “Setup MSET9” is highlighted, proceed to the next step. Do not setup MSET9 yet. Close the MSET9 Installer for now
- If “Check Again” is highlighted, there is a problem that you need to resolve before you can use MSET9. Refer to the troubleshooting
- Reinsert your SD card into your console
- Power on your console
Section II - MSET9
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
- Hover over the System Settings icon using the D-Pad (do not select it yet)
- Power off, then power on your console
- Press (A) to launch System Settings
- Navigate to
Data Management->Nintendo 3DS->Extra Data(image) - Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
- With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
- The menu will refresh and say that no SD card is inserted, which is expected
- Insert your SD card into your phone/tablet/computer
- Open the MSET9 Installer application
- Tap “Setup MSET9”
- Tap on the photo corresponding to your console model, then on the button corresponding to your current firmware version
- If the injection was successful, all buttons should become grayed out except for “Remove MSET9”
- Reinsert your SD card into your console without pressing any buttons or touching the screen
- Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
- If you get a red screen or the console gets stuck on a loading screen, follow the troubleshooting guide
Schritt III - boot9strap installieren
In this section, you will install custom firmware onto your console.
- Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
- If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
- Once it is complete, press (A) to reboot your console
- Deine Konsole sollte in das Luma3DS Konfigurations-Menü gestartet haben
- Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen können nützlich für Personalisierung oder Debugging sein
- Für den Zweck dieser Anleitung lasse alle Optionen auf ihren Standardeinstellungen (aktiviere oder deaktiviere nichts)
- Wenn sich deine Konsole beim Starten direkt wieder ausschaltet, solltest du sicherstellen, dass du
boot.firmaus der Luma3DSzipDatei in das Stammverzeichnis deiner SD-Karte kopiert hast
- Drücke (Start) um zu Speichern und neu zu starten
Section IV - Removing MSET9
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
- Power off your console
- Insert your SD card into your phone/tablet/computer
- Open the MSET9 Installer application
- Tap “Remove MSET9”
- Close the MSET9 Installer application
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
- Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
- Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
Did you follow Section IV (Removing MSET9)? That section is MANDATORY!