Installing boot9strap (HBL-USM)

---

Voor hulp in het Engels kan je terecht bij Nintendo Homebrew op Discord.

Vind je dit een goede handleiding? We accepteren donaties.

---

Technical Details (optional)

In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.

As we already have Homebrew access, we can use slotTool to do this.

Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.

For a more technical explanation, see here for information about the unSAFE_MODE exploit.

Compatibility Notes

If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join Nintendo Homebrew on Discord and ask, in English, for help.

Wat je nodig hebt

• De nieuwste versie van SafeB9SInstaller (directe download)
• The latest release of unSAFE_MODE (direct download)

Deel I - Voorbereiding

In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your console’s SD card. Then, you will use Homebrew Launcher to launch slotTool, which will overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.

1. Plaats je SD kaart in je computer
2. Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
3. Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
4. Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
   • This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
5. Kopieer slotTool.3dsx van de slotTool map in de RELEASE .zip naar de /3ds/ map op je SD-kaart
6. Copy usm.bin from the RELEASE .zip to the root folder on your SD card
7. Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
8. Stop je SD-kaart terug in je console
9. Zet je console aan
10. Open the Homebrew Launcher through your method of choice (likely the Internet Browser)
11. Launch slotTool from the list of homebrew
    • If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
12. Select the “INSTALL exploit to wifi slots 1,2,3 & shutdown” option
    • You will see some on-screen text and then your system will shut down

Section II - unSAFE_MODE

In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.

1. With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
   • Keep holding the buttons until the console boots into Safe Mode (a “system update” menu)
2. Druk op “OK” om de update te accepteren
   • Er is geen update. Dit is deel van de exploit
3. Press “I accept” to accept the terms and conditions
4. The update will eventually fail, with the error code 003-1099. Dit is verwacht gedrag
5. When asked “Would you like to configure Internet settings?”, select “Yes”
6. On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
7. If the exploit was successful, your console will have booted into SafeB9SInstaller
   • If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
   • If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
   • If you get a different error, follow this troubleshooting guide

Deel III - Boot9strap installeren

In this section, you will install custom firmware onto your console.

1. When prompted, input the key combo given on the top screen to install boot9strap
   • If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
2. Once it is complete, press (A) to reboot your console
3. Your console should have booted into the Luma3DS configuration menu
   • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
   • For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
   • If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
4. Druk op (Start) om op te slaan en opnieuw op te starten

At this point, your console will boot to Luma3DS by default.

• Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
• On the next page, you will install useful homebrew applications to complete your setup.

Section IV - Restoring WiFi Configuration Profiles

In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.

1. Open de Download Play app
2. Wacht tot je de twee knoppen ziet
   • Do not press either of the buttons
3. Druk tegelijkertijd op (L) + (Down) + (Select) om het Rosalina menu te openen
4. Selecteer “Miscellaneous options”
5. Selecteer “Switch the hb. title to the current app.”
6. Druk op (B) om door te gaan
7. Druk op (B) om terug te gaan naar het Rosalina hoofdmenu
8. Druk op (B) om het Rosalina menu af te sluiten
9. Druk op (Home), en sluit dan Download Play af
10. Relaunch the Download Play application
11. Your console should load the Homebrew Launcher
12. Launch slotTool from the list of homebrew
13. Select “RESTORE original wifi slots 1,2,3”
14. Your console will then reboot

---

Doorgaan naar Installatie voltooien