Installing boot9strap (Fredtool)

若需英語支援，請於 Discord 上的 Nintendo Homebrew 伺服器發問。
如果您喜歡本教學，我們很樂意接受捐贈。
Technical Details (optional)

This method of using Seedminer for further exploitation uses your movable.sed file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application.

This is a currently working implementation of the “FIRM partitions known-plaintext” exploit detailed here.

You should only be able to get to this page if you are running version 11.16.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!

必備項目

  • 您自 Seedminer 步驟中所取得的 movable.sed 檔案
  • The latest release of Frogminer_save (Frogminer_save.zip)
  • 11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool (direct download)
  • The latest release of Luma3DS (the Luma3DS .zip file)

第一節 — 檢查自製韌體

As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).

  1. Power off your console
  2. 按住「Select」鍵
  3. Power on your console while still holding the (Select) button
  4. If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
  5. Power off your console

If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.

第二節 — BannerBomb3

In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and copy the resulting file dump to your computer so that you can use it on the next section.

  1. Reinsert your SD card into your console
  2. Power on your console
  3. Launch System Settings on your console
  4. Navigate to Data Management -> DSiWare -> SD Card (image)
  5. Use the D-Pad to navigate and press the (A) button to select “Dump DSiWare”
    • Your console will automatically reboot
  6. Power off your console

第三節 — 準備工作

In this section, you will copy the files necessary to temporarily replace DS Connection Settings with Flipnote Studio, which is used to launch the boot9strap (custom firmware) installer.

  1. 將 SD 卡插入至電腦中
  2. 在電腦上開啟 DSIHaxInjector_new
  3. Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
  4. Under the “DSiBin” field, upload your DSiWare backup file (e.g. 42383841.bin) from the root of your SD card using the first “Browse…” option
  5. Under the “MovableSed” field, upload your movable.sed file using the second “Browse…” option
  6. Under the “InjectionTarget” field, set the injection target to DSinternet (NOT memorypit)
  7. 選擇『Build』
    • Wait a few seconds for the build process to complete
  8. In the Build History section on the left, type the Username into the “Filter Builds” field
  9. Click on the first search result
    • This result should have the latest timestamp
  10. Click the “output_(name).zip” link
  11. 於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
    • <ID0> is the 32-letter folder name that you copied in Seedminer
    • <ID1> is a 32-letter folder inside of the <ID0>
  12. Delete F00D43D5.bin from your Nintendo DSiWare folder
  13. Copy the 42383841.bin file from the hax folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
  14. 解壓 Luma3DS .zip 內的 boot.firm 及 boot.3dsx 到 SD 卡的根目錄底下
    • 「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
  15. Copy boot.nds (B9STool) from the release .zip to the root of your SD card
  16. 解壓 Frogminer_save .zip 中的 private 資料夾到 SD 卡的根目錄底下
  17. Reinsert your SD card into your console

  18. Power on your console

第四節 — 覆蓋 DS 連線設定

In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.

  1. Launch System Settings on your console
  2. Navigate to Data Management -> DSiWare -> SD Card (image)
  3. Select the “Haxxxxxxxxx!” title
  4. 選擇『複製 (Copy)』並選擇『OK』
  5. 回到系統設定主選單
  6. Navigate to Internet Settings -> Nintendo DS Connections, then select “OK” (image)
  7. If the exploit was successful, your console will have loaded the JPN version of Flipnote Studio
第五節 — Flipnote 漏洞

If you would prefer a visual guide to this section, one is available here.

In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.

  1. Complete the initial setup process for the launched game until you reach the main menu
    • Select the left option whenever prompted during the setup process
    • If you encounter an issue while doing this section, check this troubleshooting guide for your issue
  2. Using the touch-screen, select the large left box, then select the box with an SD card icon
  3. Once the menu loads, select the face icon, then the bottom right icon to continue
  4. Press (X) or (UP) on the D-Pad depending on which is shown on the top screen
  5. Select the second button along the top with a film-reel icon
  6. Scroll right until reel “3/3” is selected
  7. Tap the third box with the letter “A” in it
  8. Scroll left until reel “1/3” is selected
  9. Tap the fourth box with the letter “A” in it
  10. If the exploit was successful, your console will have loaded b9sTool
  11. Using the D-Pad, move to “Install boot9strap”
    • If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open Nintendo DS Connections and start over from the beginning of this section
  12. Press (A), then press START and SELECT at the same time to begin the process
  13. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
    • You may have to force power off by holding the power button
    • If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
    • If you see the Luma Configuration screen, power off your console and continue to the next section

Section VI - Luma3DS Configuration

  1. Press and hold (Select), and while holding (Select), power on your console
  2. Your console should have booted into the Luma3DS configuration menu
    • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
    • For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
    • If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
  3. 按『Start』鍵以存檔並重新啟動系統

At this point, your console will boot to Luma3DS by default.

  • Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  • On the next page, you will install useful homebrew applications to complete your setup.

Section VII - Restoring DS Connection Settings

In this section, you will restore DS Connection Settings to the way it was before it was temporarily replaced with Flipnote Studio in an earlier section.

  1. 於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
  2. Copy the 42383841.bin file from the clean folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder, replacing the existing one
  3. Reinsert your SD card into your console
  4. Power on your console
  5. Launch System Settings on your console
  6. Navigate to Data Management -> DSiWare -> SD Card (image)
  7. Select the “Nintendo DSi™” title
  8. 選擇『複製 (Copy)』並選擇『OK』

繼續至完成安裝