---
title: "boot9strapの導入 (Soundhax)"
---

{% include toc title="目次" %}

### 必読事項

Soundhax (universal-otherappと組み合わせた場合) は、すべてのリージョンでバージョン 1.0.0 から 11.3.0 と互換性があります。

### 必要なもの

* 最新バージョンの [Soundhax](http://soundhax.com/) *(本体に合ったリージョンとバージョンを選択してください)*
  + 再生できないビデオとしてブラウザにSoundhaxが表示される場合は、Ctrl+SまたはCmd+Sを押してコンピュータに保存します
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) (`otherapp.bin`)

### 手順

#### セクション I - 準備

1. 本体の電源を切ります。
1. パソコンにSDカードを入れます
1. SoundHaxの `.m4a` ファイルをSDカード直下にコピーします
  + SDカードのルートとは、Nintendo 3DSのフォルダなどがある最初の項目のことであり、フォルダの中ではありません。
1. SDカードのルートに`otherapp.bin`をコピーします
1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします
1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。
1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。
1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.bin`をSDカードのルートへコピーします
1. 再度、SDカードを本体に挿入してください。
1. デバイスの電源を入れます

    ![]({{ "/images/screenshots/uosoundhax-root-layout.png" | absolute_url }})
    {: .notice--info}

#### セクション II - SafeB9SInstallerを起動する

1. 再度、SDカードを本体に挿入してください。
1. デバイスの電源を入れます
1. ニンテンドー3DSサウンドを起動します

    ![]({{ "/images/screenshots/soundhax-welcome.png" | absolute_url }})
    {: .notice--info}

1. 以前にNintendo 3DS Soundを開けたことがない場合は、鳥のアイコンからそれを使用する方法についてのヒントを入手し、鳥のヒントをすべて確認してから、通常通りにアプリを閉じて再起動してください
  + このような状況では、すぐにSoundhaxを起動すると、Nintendo 3DS Soundが起動するたびにこれらのヒントが表示されます
1. `/SDCARD`に行って、「<3 nedwill 2016」を再生します
  + 何度も試行しなければならないことがあります
  + 画面がフリーズした場合、電源ボタン長押しで強制的に電源を切り、もう一度やり直してください

    ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
    {: .notice--info}

1. Exploitが成功すれば、SafeB9SInstallerが起動されます。

#### セクション III - boot9strapをインストールする

1. When prompted, input the key combo given on the top screen to install boot9strap
1. Once it is complete, press (A) to reboot your device
1. デバイスはLuma3DS設定メニューに再起動します
  + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. (Start) を押してセーブして再起動します
  + If you get an error, just continue to the next page

At this point, your console will boot to Luma3DS by default.
  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  + On the next page, you will install useful homebrew applications to complete your setup.


___

[セットアップを完了する](finalizing-setup) へ進みます
{: .notice--primary}