BannerBomb3 + Fredtool (僅限臺版主機)

---

若需英語支援，請於 Discord 上的 Nintendo Homebrew 伺服器發問。

如果您喜歡本教學，我們很樂意接受捐贈。

---

必讀事項

為了匯出系統的 DSiWare 軟體， 我們使用了在系統設定內的 DSiWare 數據管理的一個漏洞。

為了做到這一點，我們將使用你裝置的系統加密金鑰 (movable.sed) 來建構一個可使用的 DSiWare 系統備份，以便將 DSi 網路設定程式匯出到 SD 卡的根目錄。

Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.

These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, choose the other method.

必備項目

• 您自 Seedminer 步驟中所取得的 movable.sed 檔案
• The latest release of Luma3DS (the Luma3DS .zip file)
• The latest release of b9stool (direct download)
• The latest release of Frogminer_save (Frogminer_save.zip)

第一節 — 檢查自製韌體

As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).

1. 關閉您的主機
2. 按住「Select」鍵
3. 在開機時按住「Select」鍵
4. If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
5. 關閉您的主機

If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your device! Follow Checking for CFW to upgrade your existing CFW.

第二節 — 準備工作

1. 關閉您的主機
2. 將 SD 卡插入至電腦中
3. 解壓 Luma3DS .zip 內的 boot.firm 及 boot.3dsx 到 SD 卡的根目錄底下
   • 「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
4. Copy boot.nds (B9STool) from the release .zip to the root of your SD card
5. 解壓 Frogminer_save .zip 中的 private 資料夾到 SD 卡的根目錄底下
6. Keep your SD card in your computer - there are more things to do in the next section

第三節 — BannerBomb3

1. 在電腦上開啟 DSIHaxInjector V2
2. Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
3. Under the “MovableSed” field, upload your movable.sedusing the “Browse…” option
4. 選擇『Build』
   • Wait a few seconds for the build process to complete
5. In the Build History section on the left, type the Username into the “Filter Builds” field
6. Click on the first search result
   • This result should have the latest timestamp
7. Click the “output_(name).zip” link
8. Navigate to Nintendo 3DS -> <ID0> -> <ID1> on your SD card
   • 此 <ID0> 字串將與您在 Seedminer 中所使用的字串一樣
   • 此 <ID1> 字串指的是 <ID0> 內 32 字元的資料夾名稱
9. Create a folder named Nintendo DSiWare inside of the <ID1>
   • If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your PC and remove them from your SD card
10. Open the output_(name) .zip file and navigate to China_Taiwan -> output_setup
11. Copy all six .bin files to the Nintendo DSiWare folder
12. 將 SD 卡插回主機中
13. 啟動您的主機
14. 於您主機上啟動系統設定 (System Settings)
15. 移動至 資料管理 (Data Management) -> DSiWare -> SD Card -> (第二頁)
16. Take note of what number is on the DSiWare title on the second page (it will be a number between 1 and 6)
17. 關閉您的主機
18. 將 SD 卡插入至電腦中
19. 於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
20. Open the output_(name) .zip file and navigate to China_Taiwan -> output_hax
21. Copy the .bin file that is the same number as the one that was on the second page of the DSiWare Management menu to the Nintendo DSiWare folder, and overwrite when prompted
22. 啟動您的主機
23. 於您主機上啟動系統設定 (System Settings)
24. 移動至 資料管理 (Data Management) -> DSiWare -> SD Card
25. 稍息等待
    • The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the device showing an error message and rebooting
    • 如果您沒看到紫屏，那麼您可能某步驟做錯了
26. You should now have the file 42383821.bin on the root of your SD card
27. 於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
28. Delete all of the .bin files in the Nintendo DSiWare folder

第四節 — Fredtool

1. 在電腦上開啟 DSIHaxInjector_new
2. Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
   • You might want to put in a different name to differentiate it from BannerBomb3’s output
3. Under the “DSiBin” field, upload your 42383821.bin file using the first “Browse…” option
4. Under the “MovableSed” field, upload your movable.sed file using the second “Browse…” option
5. Under the “InjectionTarget” field, set the injection target to DSdownloadplay(NOT memorypit)
6. 選擇『Build』
   • Wait a few seconds for the build process to complete
7. In the Build History section on the left, type the Username into the “Filter Builds” field
8. Click on the first search result
   • This result should have the latest timestamp
9. Click the “output_(name).zip” link
10. 於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
11. Copy the 484E4441.bin file from the hax folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
12. 將 SD 卡插回主機中
13. 啟動您的主機
14. 於您主機上啟動系統設定 (System Settings)
15. 移動至 檔案管理 (Data Management) -> DSiWare
16. 在 SD 卡欄位中選擇『Haxxxxxxxxx!』程式
17. 選擇『複製 (Copy)』並選擇『OK』
18. 退出系統設定
19. Launch Download Play on your device (the orange icon with a 3DS on it)
20. 選擇『任天堂 DS (Nintendo DS)』
21. 如果漏洞成功執行，您的 3DS 將自動啟動『うごくメモ帳 (Flipnote Studio)』

第五節 — Flipnote 漏洞

If you would prefer a visual guide to this section, one is available here.

In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.

1. Complete the initial setup process for the launched game until you reach the main menu
   • Select the left option whenever prompted during the setup process
   • If you encounter an issue while doing this section, check this troubleshooting guide for your issue
2. Using the touch-screen, select the large left box, then select the box with an SD card icon
3. Once the menu loads, select the face icon, then the bottom right icon to continue
4. Press (X) or (UP) on the D-Pad depending on which is shown on the top screen
5. Select the second button along the top with a film-reel icon
6. Scroll right until reel “3/3” is selected
7. Tap the third box with the letter “A” in it
8. Scroll left until reel “1/3” is selected
9. Tap the fourth box with the letter “A” in it
10. If the exploit was successful, your device will have loaded b9sTool
11. Using the D-Pad, move to “Install boot9strap”
    • If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open DS Download Play and start over from the beginning of this section
12. Press (A), then press START and SELECT at the same time to begin the process
13. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
    • You may have to force power off by holding the power button
    • If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
    • If you see the Luma Configuration screen, power off your device and continue to the next section

Section VI - Luma3DS Configuration

1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
   • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
   • For the purpose of this guide, these settings will be left on default settings
   • If you boot to HOME Menu, follow this troubleshooting guide
2. 按『Start』鍵以存檔並重新啟動系統

第七節 — 還原『下載通信(Download Play)』程式

1. 於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
2. Copy the 484E4441.bin file from the clean folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
3. 將 SD 卡插回主機中
4. 啟動您的主機
5. 於您主機上啟動系統設定 (System Settings)
6. 移動至 檔案管理 (Data Management) -> DSiWare
7. 在 SD 卡欄位中選擇『Haxxxxxxxxx!』程式
8. 選擇『複製 (Copy)』並選擇『OK』
9. 退出系統設定
10. 關閉您的主機

---

繼續至完成安裝