Probleemoplossing

---

Voor hulp in het Engels kan je terecht bij Nintendo Homebrew op Discord.

Vind je dit een goede handleiding? We accepteren donaties.

---

Deze pagina biedt advies voor het oplossen van problemen die algemeen zijn ondervonden. Als je je probleem niet kunt oplossen met het advies op deze pagina, neem dan deel aan Nintendo Homebrew op Discord en beschrijf je probleem, inclusief wat je al hebt geprobeerd.

Table of Contents

Used on multiple pages:

• SafeB9SInstaller

Guide pages:

• Seedminer
  • BannerBomb3
  • Installing boot9strap (Fredtool-Inject)
  • Installing boot9strap (PicHaxx)
• Installing boot9strap (Soundhax)
• Installing boot9strap (SSLoth-Browser)
• Installing boot9strap (super-skaterhax)

• Installing boot9strap (MSET9)

• Installatie voltooien

Issues after installation:

• Boot issues
• Software issues

Problemen met SafeB9SInstaller

Before opening SafeB9SInstaller

Kan SafeB9SInstaller.bin niet openen

Het bestand SafeB9SInstaller.bin ontbreekt of zit in de verkeerde map. Download de nieuwste versie van SafeB9SInstaller, pak het uit en plaats SafeB9SInstaller.bin op de hoofdmap van je SD-kaart. Voeg de .bin extensie niet toe als je het nog niet ziet.

SigHaxed FIRM was not installed! Kijk naar het onderste scherm voor meer informatie.

MicroSD Card - init failed

Your SD card is most likely acting weird. Try reformatting your SD card (Windows, macOS, Linux). If this doesn’t work, try another SD card.

SigHaxed FIRM - File not found

Ofwel zitten boot9strap.firm en boot9strap.firm.sha niet in de boot9strap map, of de boot9strap map heeft de verkeerde naam. Download de nieuwste versie van boot9strap en plaats boot9strap.firm en boot9strap.firm.sha in de boot9strap map.

SigHaxed FIRM - invalid FIRM

Er is een probleem met je boot9strap.firm en boot9strap.firm.sha bestanden. Download de nieuwste versie van boot9strap opnieuw en plaats boot9strap.firm en boot9strap.firm.sha in de boot9strap map.

Secret Sector - File not found

Je mist secret_sector.bin van de boot9strap map, of de boot9strap map heeft niet de juiste naam. Download secret_sector.bin met behulp van een torrent client en plaats het in de boot9strap map.

Something else

Sluit je aan bij Nintendo Homebrew op Discord voor hulp, en beschrijf het bericht dat je ziet.

Seedminer

Multiple long folder names in Nintendo 3DS folder

This occurs when you use your SD card in multiple 3DS consoles and is intended to prevent inadvertently merging data that would not be valid on other consoles. Om erachter te komen welke lange mapnaam correct is voor je 3DS, volg dan deze instructies:

1. Hernoem de Nintendo 3DS map naar BACKUP_Nintendo 3DS
2. Stop je SD-kaart terug in je console
3. Zet je console aan
4. Wait for the console to generate the SD card data
   • Je applicaties zullen verdwenen zijn. Dit is normaal en wordt binnenkort opgelost
5. Zet je console uit
6. Plaats je SD kaart in je computer
7. Ga naar de Nintendo 3DS map op je SD-kaart
8. Kopieer de 32-tekens lange naam van de map die je ziet
   • Dit is je echte ID0 die je zal gebruiken in Deel II van Seedminer
9. Verwijder de Nintendo 3DS map
10. Hernoem de BACKUP_Nintendo 3DS map naar Nintendo 3DS

Bruteforce Movable skips to step 4

De website heeft al je movable.sed gemijnd met je friend code en ID0 combinatie. Je kunt de ‘movable.sed’ gebruiken die het je biedt.

Important! You have been locked out of the automated part1 dumper system...

Je friend code is geblokkeerd voor het gebruik van de friend code bot omdat je 3DS de bot niet succesvol heeft bevriend. Zorg ervoor dat je 3DS correct is verbonden met het internet, ga dan naar de Nintendo Homebrew Discord server en vraag om ontgrendeld te worden.

We were unable to successfully complete your bruteforce request. :`(

De website heeft bepaald dat jouw ‘movable.sed’ niet kan gebruteforced worden. Zorg ervoor dat je de website het juiste ID0 gegeven hebt. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.

New 3DS users can follow Installing boot9strap (super-skaterhax), while Old 3DS users can follow Installing boot9strap (MSET9). If you cannot do MSET9 for any reason, you will need to follow a method that requires additional games or hardware.

BannerBomb3

Multiple ID1 folders inside of ID0

This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.

You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:

Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:

Your SD card should now look something like this:

Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.

DSiWare Management menu crashes without showing BB3 multihax menu

Zorg ervoor dat F00D43D5.bin het enige bestand in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare is. If it is, then re-create it with the Bannerbomb3 Injector.

Also, ensure that bb3.bin is on the root of the SD card. If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.

If neither of these solutions fixes this problem, then custom firmware may have been uninstalled on this console in a way that makes this method impossible to perform. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.

DSiWare Management menu displays "No accessible software data."

F00D43D5.bin bevindt zich niet in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. Zorg ervoor dat Nintendo DSiWare correct gespeld is en een spatie heeft. Hoofdletters/kleine letters maken niet uit.

DSiWare Management shows a question mark

Er kan een probleem zijn met je F00D43D5.bin bestand (het kan beschadigd zijn of bedoeld voor een andere 3DS). Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.

Installing boot9strap (Fredtool-Inject)

Error on DSiHaxInjector page

Zorg ervoor dat je movable.sed en DSiWare back-up van dezelfde console komen. Een mismatch resulteert in een error.

"Haxxxxxxxxx!" does not appear

Er is een probleem met je 42383821.bin bestand (het is onjuist, het ontbreekt, werd misplaatst of is beschadigd). Re-create your files with the DSIHaxInjector_new website and ensure that you place the 42383821.bin file from output.zip -> hax in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare.

DSiWare launches normally

Haxxxxxxxxx! is niet van je SD-kaart naar het systeemgeheugen gekopieerd.

SD card is grayed out in Flipnote

Flipnote kan een lange tijd nemen om je kaart te indexeren als je een grote SD-kaart hebt. Laat het een aantal minuten blijven zitten.

Lenny face verschijnt niet in SD-kaart sectie

Je hebt de private map niet van Frogminer_save .zip naar de hoofdmap van je SD-kaart gekopieert.

Flipnote bevriest

Het zou kunnen dat je per ongelijk het touch screen hebt aangeraakt terwijl de gemodificeerde Flipnote open stond. Voer je DS Connection Settings opnieuw in en zorg ervoor dat je niet per ongelijk het touchscreen gebruikt.

Green screen after pasting

Het bestand boot.nds ontbreekt of is misplaatst. Download de nieuwste versie van b9stool en plaats boot.nds op de hoofdmap van je SD-kaart, ter vervanging van het bestaande bestand.

White screen after pasting

Er is een probleem met je boot.nds bestand. Download de nieuwste versie van b9stool opnieuw en plaats boot.nds op de hoofdmap van je SD-kaart, ter vervanging van het bestaande bestand.

Unable to open Luma3DS configuration menu after running B9STool

Join Nintendo Homebrew on Discord and explain what has happened.

Installing boot9strap (PicHaxx)

"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.

If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.

"An exception occurred" or Errdisp when opening Picross

Your console already has custom firmware. Je zou best controleren op CFW.

"An error has occurred, forcing the software to close..." (white message box)

There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.

Game starts normally

Your modified 00000001.sav file may be misplaced, or you may have used the wrong movable.sed when creating it. Re-generate your movable.sed from Bruteforce Movable, then re-create the save using the PicHaxx Save Tool and place the resulting file (00000001.sav) in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.

Boot9strap installeren (Soundhax)

Red/purple/pink and white screen after running Soundhax

If your console is on system version 9.4.0, 9.5.0, or 9.6.0, you may be encountering a bug with an old version of universal-otherapp. Download the latest version from here.

If your console is not on those firmwares, it likely indicates that you already have custom firmware. Je zou best controleren op CFW.

"An error has occurred, forcing the software to close..." (white message box)

Er is een probleem met je otherapp.bin bestand (het ontbreekt, werd misplaatst of is corrupted). Download de nieuwste versie van universal-otherapp en plaats het op de hoofdmap van je SD-kaart.

"Could not play"

You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Sluit je aan bij Nintendo Homebrew op Discord voor hulp.

Failed to mount the SD card!

Maak een back-up van je data en herformatteer je SD-kaart als FAT32 met het aanbevolen hulpmiddel afhankelijk van je besturingssysteem: (Windows, macOS of Linux). MiniTool Partition Wizard en het formatteer programma van HP (HPUSBDisk) zijn ervoor bekend om problemen te veroorzaken met 3DS SD-kaarten.

Mocht dit niet lukken, gebruik dan een andere SD-kaart.

Installing boot9strap (SSLoth-Browser)

Red/purple/pink and white screen after running Browserhax

Dit geeft waarschijnlijk aan dat je al custom firmware hebt. Je zou best controleren op CFW.

"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

The file arm11code.bin is missing or misplaced. Download de nieuwste versie van universal-otherapp, plaats otherapp.bin op de hoofdmap van je SD-kaart en hernoem het naar arm11code.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.

"An error has occurred, forcing the software to close..." (white message box)

There may be an issue with your arm11code.bin file. Download de nieuwste versie van universal-otherapp, plaats otherapp.bin op de hoofdmap van je SD-kaart en hernoem het naar arm11code.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.

You can also try resetting your browser save data:

1. Launch the browser, then launch the browser settings
2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
3. Try the exploit again

Opening the browserhax QR code or URL crashes

Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.

1. Launch the browser, then launch the browser settings
2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
3. Try the exploit again

System Update prompt when opening browser

The SSLoth proxy was incorrectly configured. Re-do the SSLoth section on the page.

Error 032-0420 when opening browser

Follow these steps in order:

1. Launch System Settings on your console
2. Navigate to Internet Settings -> Connection Settings
3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
4. Set “Proxy Settings” to “No”
5. Click OK, then click Save
6. When prompted, click “Test” to perform the connection test
   • The test should succeed
7. Click “OK” to continue
8. Press “Back” twice, then “Close” to go back to the HOME Menu
9. Open the Internet Browser once
10. If prompted about a system update, press OK
    • This won’t actually update the system
11. Start again from Section II

Frozen on "Doing agbhax..."

There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.

"PrepareArm9ForTwl returned error c8804631!"

Sluit je aan bij Nintendo Homebrew op Discord voor hulp.

Failed to mount the SD card!

Maak een back-up van je data en herformatteer je SD-kaart als FAT32 met het aanbevolen hulpmiddel afhankelijk van je besturingssysteem: (Windows, macOS of Linux). MiniTool Partition Wizard en het formatteer programma van HP (HPUSBDisk) zijn ervoor bekend om problemen te veroorzaken met 3DS SD-kaarten.

Mocht dit niet lukken, gebruik dan een andere SD-kaart.

Installing boot9strap (super-skaterhax)

"An error has occurred. Please save your data in any software currently in use, then restart the system."

The date is set incorrectly. To set it correctly, follow these steps:

1. Select the System Settings icon on the HOME Menu, and tap Open.
2. Tap Other Settings.
3. Tap Date & Time.
4. Tap Today’s date.
5. Tap Up/Down Arrows to set the correct Day, Month and Year.
6. Select OK to confirm.

If the problem persists:

• Ensure that arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, and boot.3dsx are on the root of the SD card (not inside of any folder)
• Ensure that you selected the correct payload for your region AND system version
• Ensure that your region settings look like this
• Try resetting your browser data:
  1. Launch the browser, then launch the browser settings
  2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
  3. Try the exploit again
• Try changing the system language to something other than the current language

"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).

An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!

Dit geeft waarschijnlijk aan dat je al custom firmware hebt. Je zou best controleren op CFW.

Installing boot9strap (MSET9)

Python 3 is not installed

Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.

Error 01: Couldn't find Nintendo 3DS folder

You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.

Remember, your SD card should look like this:

If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.

Error 02: Your SD is write protected

Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.

Error 03: Don't change console version

You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for “Old 3DS, 11.8 - 11.17” and then later selected option 2 for “New 3DS, 11.8 - 11.17”).

If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of Section I.

Error 05: No Mii Maker Data!

Mii Maker data was not found on the SD card. Start again from the beginning of Section I.

Error 06: You need at least 16MB free

Your SD card does not have enough space to trigger MSET9. Free up some space and try again.

At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it’s best to free up at least that much.

Error 07: You don't have 1 ID0, you have (#)!

You have multiple ID0 folders. To determine the correct folder, follow these instructions:

1. Hernoem de Nintendo 3DS map naar BACKUP_Nintendo 3DS
2. Stop je SD-kaart terug in je console
3. Zet je console aan
4. Wait for the console to generate the SD card data
   • Je applicaties zullen verdwenen zijn. Dit is normaal en wordt binnenkort opgelost
5. Zet je console uit
6. Plaats je SD kaart in je computer
7. Ga naar de Nintendo 3DS map op je SD-kaart
8. Write down the first few characters of the folder you see
   • This is your true ID0, which we will keep in the real Nintendo 3DS folder
9. Delete the ID0 from the current Nintendo 3DS folder
10. Move the true ID0 folder from the BACKUP_Nintendo 3DS folder to the Nintendo 3DS folder
11. If it exists, move the Private folder from the BACKUP_Nintendo 3DS folder to the Nintendo 3DS folder

Once you’ve done this, continue from Section I Step 7.

Error 08: One or more files are missing or malformed!

One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.

Error 10: Database(s) malformed or missing!

This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.

1. If you haven’t already, press Enter to close the MSET9 script
2. Insert the SD card into your console
3. Zet je console aan
4. Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
5. Zet je console uit
6. Insert the SD card into your computer
7. Return to Section I Step 7

Error 11: macOS is not supported!

You are trying to run the MSET9 script from a computer running macOS, which is not currently supported. Try running the script from a computer running Windows or Linux. If you do not have access to such a computer, you will need to follow an alternate exploit.

Error 12: You don't have 1 ID1, you have (#)!

This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.

You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:

Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:

Your SD card should now look something like this:

Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.

Red screen after reinserting SD card (Section II Step 11)

You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.

Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)

System Settings loading infinitely after reinserting the SD card

You most likely did something different from the MSET9 instructions, or selected the wrong model or version.

1. Close the script window
2. Execute the mset9.py script on the root of the SD card
   • Windows: Double-click mset9.bat
   • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
   • You should see a window that says “MSET9 … SETUP by zoogie”
3. Type the number corresponding to your console model and version, then press Enter
4. Type 3, then press Enter
5. Once the window says “Successfully removed MSET9!”, reinsert the SD card into your console
6. Zet je console aan
7. Return to Section II Step 1

If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:

1. Close the script window
2. Run the MSET9 script
   • Windows: Double-click mset9.bat
   • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
   • You should see a window that says “MSET9 … SETUP by zoogie”
3. Type the number corresponding to your console model and version, then press Enter
4. Type 3, then press Enter to remove MSET9
5. If possible, use a new SD card; otherwise, backup and reformat your existing SD card as FAT32 (Windows, Linux)
6. Insert the formatted, blank SD card into your console
7. Return to Section I Step 1

After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.

Installatie voltooien

Unable to update console

De volgende stappen kunnen in elke volgorde uitgevoerd worden, maar zijn gesorteerd volgens de moeilijkheidsgraad om ze uit te voeren.

1. Stel uw DNS instellingen in op “Auto”
2. Verplaats je dichter bij je wifi-router
3. Update vanuit Safe Mode door je console uit te schakelen, (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A) ingedrukt te houden tijdens het opstarten en de instructies te volgen op het scherm
4. Verwijder je wifi connectie, verbind daarne opnieuw met je wifi
5. Herstart je wifi-router
6. Maak verbinding met een andere wifi-verbinding, zoals een mobiele hotspot
7. Nintendo servers kunnen offline zijn; Probeer het later opnieuw
8. Als je nog steeds een foutmelding krijgt, volg dan CTRTransfer en probeer het opnieuw
9. Voor verdere ondersteuning (in het Engels), join dan Nintendo Homebrew op Discord

Error #02: Missing essential.exefs

You said ‘No’ to the “Make essential files backup?” prompt in GodMode9. Power off your console, power it on while holding (Start) to re-enter GodMode9, say ‘Yes’ to the prompt, then try again.

Unable to open GodMode9 or Error #03: Missing files

You did not copy everything from finalize.zip to the root of your SD card. Remember, your SD card should have at least these files:

Error #04: No space

You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. If you don’t have enough space, follow these steps:

1. Zet je console uit
2. Plaats je SD kaart in je computer
3. Copy the Nintendo 3DS folder from the root of your SD card to your computer
4. Delete the Nintendo 3DS folder from the SD card
5. Stop je SD-kaart terug in je console
6. Houd (Start) ingedrukt en terwijl je (Start) ingedrukt houdt, zet je je console aan. Dit zal GodMode9 starten
7. Press the (Home) button
8. Selecteer “Scripts…”
9. Select “finalize”
10. Press (A) to create a NAND backup
    • This may take around fifteen minutes
11. Press (A) again
    • The console should automatically power off
12. Plaats je SD kaart in je computer
13. Copy the files in /gm9/backups/ on your SD to a safe location on your computer
14. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card
15. Copy the Nintendo 3DS folder from your computer to the root of your SD card
16. Delete the Nintendo 3DS folder from your computer

Now that you have your NAND backup in a safe place:

1. Stop je SD-kaart terug in je console
2. Houd (Start) ingedrukt en terwijl je (Start) ingedrukt houdt, zet je je console aan. Dit zal GodMode9 starten
3. Press the (Home) button
4. Selecteer “Scripts…”
5. Select “finalize”
6. Continue the script as normal
   • The NAND backup will be automatically skipped

Information #05: No title database

Press (A) to import a title database, unlock SysNAND writing by entering the buttons on-screen, then continue the script as normal.

Error #06 or "Error: Could not open directory" when attempting a NAND backup

Make sure you have at least 1.3GB available in your SD card. If you don’t have enough space, follow these steps:

1. Zet je console uit
2. Plaats je SD kaart in je computer
3. Copy the Nintendo 3DS folder from the root of your SD card to your computer
4. Delete the Nintendo 3DS folder from the SD card
5. Stop je SD-kaart terug in je console
6. Houd (Start) ingedrukt en terwijl je (Start) ingedrukt houdt, zet je je console aan. Dit zal GodMode9 starten
7. Perform a NAND Backup
8. Copy the files in gm9/out on your SD to a safe location on your computer
9. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card, keeping essential.exefs in /gm9/out/
10. Copy the Nintendo 3DS folder from your computer to the root of your SD card
11. Delete the Nintendo 3DS folder from your computer

If you have enough space on your SD card, your SD might be corrupted or faulty. Check your SD card for any errors by following the guide according to your computer’s operating system: Windows, Linux, macOS.

Error #09: Unsupported GodMode9 version

You are somehow running a version of GodMode9 not packaged with the script. Make sure you copied the contents of finalize.zip to the root of your SD card and that you are holding START while powering on your console.

Error #11: Missing donor database

You did not copy everything from finalize.zip to the root of your SD card. Remember, your SD card should have at least these files:

Error #12: Copy (file).db fail

Ensure that your SD card is not locked. If the SD card is not locked and you continue to get this error, join Nintendo Homebrew on Discord for assistance.

Information #17: Duplicate NAND backup

The script has detected that the Nintendo 3DS folder is missing AND that you have already made a NAND backup before. If you intend to install homebrew applications, you should do the following:

1. Press (B) to cancel making another NAND backup
2. Hold (R) and press (Start) at the same time to power off your console
3. Copy the contents of /gm9/backups/ to a safe location on your computer
4. Delete /gm9/backups/ from your SD card
5. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card
   • If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it
6. Houd (Start) ingedrukt en terwijl je (Start) ingedrukt houdt, zet je je console aan. Dit zal GodMode9 starten
7. Druk op de (Home) knop om het actiemenu te openen
8. Selecteer “Scripts…”
9. Select “finalize”
10. Follow the prompts in the script, answering any questions that you are asked

Error #18: MSET9 detected

You didn’t remove MSET9 when prompted to. Follow Section IV - Removing MSET9, then re-run the script.

---

Boot issues on consoles with custom firmware

The steps detailed here generally assume that your console has a modern custom firmware setup (boot9strap + Luma3DS 8.0 or greater). Als je console een oudere homebrew setup heeft (bijvoorbeeld iets gebaseerd op arm9loaderhax of menuhax), dan moet je updaten voor je deze instructies probeert.

Power/notification light indicators

My console powers off when I try to turn it on, and/or the notification LED shows a color on boot

Er is een probleem met je boot.firm bestand. Als je boot9strap 1.4 gebruikt, kan je 3DS notificatie LED een bepaalde kleur flashen. Deze kleur wordt gebruikt om problemen met je boot.firm bestand op SD-kaart of intern geheugen te diagnosticeren. On older versions of boot9strap, the blue light will power off almost immediately when trying to turn on the console.

Als de notificatie LED knippert:

• White: Your 3DS was not able to find boot.firm on your SD card or on internal memory.
• Magenta: Your 3DS was not able to find boot.firm on your SD card. Het kon boot.firm vinden in het interne geheugen, maar het bestand is beschadigd.
• Red: Your 3DS was able to find boot.firm on both your SD card and on internal memory, but both files are corrupted.

Je kunt een nieuw boot.firm bestand krijgen door de nieuwste versie van Luma3DS te downloaden, het uitpakken en boot.firm plaatsen op de hoofdmap van je SD-kaart. Indien je boot.firm bestand consequent gedetecteerd wordt als beschadigd, controleer je best je SD-kaart op fouten (Windows, Linux, of macOS). Houd er ook rekening mee dat de 3DS problemen heeft met bestanden die zijn uitgepakt met WinRAR.

If you hear a “popping sound”, potentially accompanied with the backlight turning on for a split second, there is a hardware issue with your console (such as a disconnected backlight cable). You may be able to get your console to boot by holding it at certain angles.

My console gets stuck on a black screen with blue power light staying on

De volgende stappen kunnen in elke volgorde uitgevoerd worden, maar zijn gesorteerd volgens de tijdsduur om ze uit te voeren.

1. Power off your console, remove the SD card, re-insert it, then power on your console.
2. Power off your console, eject the game cartridge if inserted, power on your console, then wait up to ten minutes. If your console boots within ten minutes, the issue has been fixed and is unlikely to reoccur
3. Hernoem de Nintendo 3DS map op je SD-kaart naar Nintendo 3DS_BACKUP en probeer dan je 3DS op te starten. If your console successfully boots, there is some issue within your Nintendo 3DS folder. Probeer HOME-menu extdata te wissen:
   • Navigeer naar /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/
   • Verwijder de overeenkomende map voor je 3DS regio:
     • EUR Regio: 00000098
     • JPN Regio: 00000082
     • USA Regio: 0000008f
     • CHN Regio: 000000A1
     • KOR Regio: 000000A9
     • TWN Regio: 000000B1
4. Probeer in herstelmodus op te starten en je systeem up te daten:
   • Zet je console uit
   • Hou de volgende knoppen vast: (Left Shoulder) + (Right Shoulder) + (D-Pad omhoog) + (A)
   • Zet je console aan
   • If you were successful, the console will boot to an “update your system” screen
5. Volg de CTRTransfer handleiding
6. Voor verdere ondersteuning vraag om hulp in de Nintendo Homebrew Discord

Error message on boot

"An error has occurred: Failed to apply 1 FIRM patch(es)" or "An exception has occurred -- Current process: pm"

Je Luma3DS versie is verouderd. Download de nieuwste versie van Luma3DS en plaats boot.firm op de hoofdmap van je SD-kaart, ter vervanging van het bestaande bestand. Zorg ervoor dat je het ZIP-bestand uitpakt met een andere tool dan WinRAR, omdat het bekend is dat het problemen veroorzaakt met 3DS-gerelateerde bestanden.

"Unable to mount CTRNAND or load the CTRNAND FIRM. Please use an external one."

There are a number of reasons as to why this could be happening. In any case, this error can usually be fixed by following the CTRTransfer guide.

"An error has occurred. Hold down the POWER button to turn off the power..."

ARM11 exception handlers zijn uitgeschakeld of custom firmware is niet geïnstalleerd. Probeer ARM11 exception handlers in te schakelen: + Zet je console uit + Hou (Select) vast + Power on your console, while still holding (Select) + Als “Disable ARM11 exception handlers” is aangevinkt, vink het uit

HOME Menu is missing installed applications

This could be caused by various reasons, but most likely because your SD card is not being read by the system. You can check if your SD is being read by holding SELECT on boot and checking the yellow text on the bottom screen; if it says “Booted from CTRNAND via B9S”, then your console is booting from the internal memory and not from the SD card. If this is the case, attempt the steps below, which are listed from easiest to hardest:

1. Power off your console, remove the SD card, re-insert it, then power on your console
2. Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
3. Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux (this will wipe your SD card data)
4. Test your SD card for errors by following the guide according to your computer’s operating system: Windows, Linux, macOS. If your SD card is marked as faulty, then you will have to replace your SD card
5. Your SD card slot may be broken. Join Nintendo Homebrew on Discord for further assistance

Blue "BOOTROM ERROR" screen

Your console is likely hard-bricked. You will need to buy an ntrboot flashcart to reinstall boot9strap in order to attempt to fix your console. Dit kan ook duiden op een hardware probleem dat niet kan worden opgelost. In ieder geval, join Nintendo Homebrew op Discord voor hulp. + Het is ook mogelijk dat iemand een boot-time splash screen heeft ingesteld dat eruit ziet als een brick. Try leaving your console powered on, waiting on the blue screen, for five minutes.

Some other error

Neem een foto van de fout en meld je aan bij Nintendo Homebrew on Discord voor hulp.

Software issues on consoles with custom firmware

DSi / DS functionality is broken or has been replaced with Flipnote Studio

1. Download de nieuwste versie van TWLFix-CFW (het .3dsx bestand)
2. Zet je console uit
3. Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
4. Kopieer TWLFix-CFW.3dsx naar de /3ds/ map op je SD kaart
5. Stop je SD-kaart terug in je console
6. Start de Homebrew Launcher op
7. Start TWLFix-CFW op uit de lijst met homebrew
8. Klik op (A) om de kapotte TWL titels te verwijderen
9. Press (Start) to reboot the console
10. Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • De update zal zien dat de essenciële TWL titels zijn gedeïstalleerd en zal ze opnieuw installeren
11. Once the update is complete, tap “OK” to reboot the console

GBA Virtual Console and/or Safe Mode functionality is broken

Your console is running Luma3DS 6.6 or older, likely via arm9loaderhax. You should follow A9LH to B9S to update your console to a modern custom firmware environment.

Extended memory mode games (Pokemon Sun/Moon, Smash, etc.) don't work

Dit kan gebeuren na een CTRTransfer of regio verandering op Old 3DS / 2DS. You will need to system format your console to fix this issue.

Exception screen when booting/loading an application

Look for your exception screen in this page. If you weren’t able to find your error or the instructions didn’t work, join Nintendo Homebrew on Discord for further assistance.

Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher

Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of menuhax67 (the menuhax .zip), then follow the “Uninstall menuhax67” section here.

---

Andere problemen oplossen

Clear HOME Menu extdata

1. Zet je console uit
2. Plaats je SD kaart in je computer
3. Navigeer naar de /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ map op je SD-kaart
4. Verwijder de overeenkomende map voor je 3DS regio:
   • EUR Regio: 00000098
   • JPN Regio: 00000082
   • USA Regio: 0000008f
   • CHN Regio: 000000A1
   • KOR Regio: 000000A9
   • TWN Regio: 000000B1
5. Stop je SD-kaart terug in je console

Clear HOME Menu theme data

1. Zet je console uit
2. Plaats je SD kaart in je computer
3. Navigeer naar de /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ map op je SD-kaart
4. Verwijder de overeenkomende map voor je 3DS regio:
   • EUR Regio: 000002ce
   • JPN Regio: 000002cc
   • USA Regio: 000002cd
5. Stop je SD-kaart terug in je console

Manually entering Homebrew Launcher

If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need boot.3dsx and boot.firm on the root of your SD card.)

1. Start de Download Play applicatie ()
2. Wacht tot je de ‘Nintendo 3DS’ en ‘Nintendo DS’ knoppen ziet
3. Druk tegelijkertijd op (L) + (Down) + (Select) om het Rosalina menu te openen
4. Selecteer “Miscellaneous options”
5. Selecteer “Switch the hb. title to the current app.”
6. Druk op (B) om door te gaan
7. Druk op (B) om terug te gaan naar het Rosalina hoofdmenu
8. Druk op (B) om het Rosalina menu af te sluiten
9. Press (Home) to suspend Download Play
10. Press the “Close” button on the bottom screen to close Download Play
11. Re-launch the Download Play application
12. Your console should load the Homebrew Launcher
    • If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card

Turning off Parental Controls

You can disable the Parental Controls feature by going to System Settings -> Parental Controls and inserting the PIN, then pressing “Clear Settings”, then “Delete” to remove it. However, if you do not know the PIN and therefore cannot access the console’s settings, you will need to disable it. In order to do this, you need to obtain your console’s master key (mkey):

1. Go to this website
2. Fill the following boxes with the information:
   • Device Type: Select “3DS” (the same applies if you are using a 2DS, New 3DS (XL/LL) or New 2DS (XL/LL))
   • System Date: The day and month your console’s clock is set to
   • Inquiry Number: Can be obtained by pressing “Forgot PIN” then “I Forgot” in the Parental Controls screen
3. After you have obtained your mkey, press OK on the screen you have obtained your Inquiry Number, then input the master key
4. Press “Clear Settings”, then “Delete” to remove all Parental Controls data