Installing boot9strap (kartdlphax)

---

Für Support auf Englisch, bitte um Hilfe auf dem Nintendo Homebrew Discord.

Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.

---

Technische Details (optional)

In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.

To accomplish this, we can use the Download Play functionality of the game Mario Kart 7, using a 3DS with custom firmware already installed along with a custom game plugin.

This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.

Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.

For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.

Kompatibilitätshinweise

In order to follow these instructions, you will need the following:

• A second 3DS with custom firmware (the source 3DS) that is the same region as the 3DS you are trying to modify (the target 3DS)
  • The consoles must be USA, JPN, or EUR region consoles
• A physical or digital copy of Mario Kart 7 that is the same region as both consoles
• An SD card for both consoles

Was du brauchst

On the source 3DS (the 3DS with custom firmware):

• The latest release of kartdlphax (plugin.3gx)
• The latest release of Luma3DS 3GX Loader Edition (boot.firm)

On the target 3DS (the 3DS that you are trying to modify):

• Die neueste Version vom SafeB9SInstaller (Direkter Download)
• The latest release of standard Luma3DS (the Luma3DS .zip file)
• The latest release of unSAFE_MODE (the RELEASE .zip file)

Section I - Hardware Button Check (target 3DS)

In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.

1. Power on your console
2. Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
   • The camera applet should appear
3. Power off your console

If the camera does not open, you cannot follow this method. Wenn das der Fall ist, trete dem Nintendo Homebrew on Discord Server bei und frage, auf Englisch, nach Hilfe.

Section II - Prep Work (source 3DS)

In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.

1. Insert the SD card of your source 3DS in your computer
2. Copy Luma 3GX Loader Edition’s boot.firm to the root of the source 3DS’s SD card, replacing any existing file
   • The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
3. Copy kartdlphax’s plugin.3gx to the following directory on the source 3DS’s SD card, depending on the region of your copy of Mario Kart 7:
   • USA: luma/plugins/0004000000030800
   • EUR: luma/plugins/0004000000030700
   • JPN: luma/plugins/0004000000030600
   • Create the plugins and 00040000... folders if they do not already exist
4. Eject the SD card and put it in the source 3DS

Section III - Prep Work (target 3DS)

In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.

1. Insert the SD card of your target 3DS in your computer
2. Copy boot.firm and boot.3dsx from the standard Luma3DS .zip to the root of your SD card
3. Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
4. Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
5. Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
6. Copy usm.bin from the RELEASE .zip to the root of your SD card
7. Create a folder called 3ds on the root of your SD card
8. Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
9. Eject the SD card and put it in the target 3DS

Section IV - kartdlphax

In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.

1. Power on the source 3DS
   • If you are prompted to set up Luma3DS, just press START to save the configuration
2. Once in the HOME Menu, press (Left Shoulder) + (Down D-Pad) + (Select) to bring up the Rosalina menu
3. Select “Enable plugin loader”
4. Drücke (B), um das Rosalina-Menü zu schließen
5. Launch Mario Kart 7
   • Ensure that wireless connectivity is enabled
6. Navigate to Local Multiplayer. A menu should pop up
   • If the screen freezes, hold the power button for fifteen seconds to force power off your console, then try again
   • If you have launched kartdlphax previously, the last selected settings will be loaded. If they are correct, select Use settings and skip the next 3 steps. If they are incorrect, select Change settings and proceed.
7. Select your target 3DS console type (Old 3DS family or New 3DS family)
8. Select the following exploit type depending on your system version:
   • 11.16.0: select xPloitInjector (11.16)
   • 11.17.0: select xPloitInjector (11.17)
9. A confirmation menu will show up. If the settings shown on the top screen are correct, select Use settings
   • If the settings are not correct, press Change settings and modify them accordingly
10. Select Create Group
    • If the source 3DS freezes at this point and you are using a cartridge, try installing the cartridge to the system
11. Power on the target 3DS
    • Ensure that wireless connectivity is enabled
12. On the target 3DS, open the Download Play application (), then select “Nintendo 3DS”
13. Join the group created by the source 3DS
14. Select “Start” on the source 3DS once it has detected the target 3DS
15. Once multiplayer has loaded, navigate to Grand Prix -> 50cc -> (any driver) -> Mushroom Cup -> OK
16. Wait a while (a percentage should be displayed on the source 3DS)
17. If the exploit was successful, the target 3DS will have booted into the 3DS ROP xPloit Injector
    • If the exploit was not successful, power off the source 3DS and target 3DS and start again from the beginning of Section III - kartdlphax
18. Press (X) to inject unSAFE_MODE
19. If the injection was successful, the screen will turn green and the target 3DS will automatically power off
    • If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)

You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.

Section V - unSAFE_MODE

In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.

1. With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
   • Keep holding the buttons until the console boots into Safe Mode (a “system update” menu)
2. Drücke “OK” um das System-Update zu bestätigen
   • Es gibt kein Update. Dies ist ein Teil des Exploits
3. Drücke “Akzeptieren”, um die Nutzungsbedingungen und Warnhinweise zu akzeptieren
4. Das Update wird irgendwann mit dem Fehlercode 003-1099 fehlschlagen. Dies ist so vorgesehen
5. Wenn du gefragt wirst, ob die Internet Einstellungen festgelegt werden möchtest, wähle “Festlegen”
6. Öffne im folgenden Menü Verbindung 1 -> Einstellungen ändern -> Nächste Seite (rechter Pfeil) -> Proxy-Einstellungen -> Detailliertes Setup (Bild)
7. If the exploit was successful, your console will have booted into SafeB9SInstaller
   • If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
   • If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
   • If you get a different error, follow this troubleshooting guide

Section VI - Installing boot9strap

In this section, you will install custom firmware onto your console.

1. Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
   • If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
2. Once it is complete, press (A) to reboot your console
3. Your console should have booted into the Luma3DS configuration menu
   • Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
   • For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
   • If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
4. Drücke (Start) zum Speichern und neustarten

Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.

• Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
• Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.

Section VII - Restoring WiFi Configuration Profiles

In diesem Abschnitt wirst du den Homebrew Launcher (diesmal mit Custom Firmware) betreten, sodass du die in Abschnitt I überschriebenen Wi-Fi Slots wiederherstellen kannst.

1. Starte die Download-Spiel Anwendung
2. Warte bis du die zwei Knöpfe siehst
   • Drücke keine der Tasten
3. Drücke gleichzeitig (L) + (Steuerkreuz unten) + (Select), um das Rosalina-Menü zu öffnen
4. Wähle “Miscellaneous options”
5. Wähle “Switch the hb. title to the current app.”
6. Drücke (B) um fortzufahren
7. Drücke (B), um zum Rosalina-Hauptmenü zurückzukehren
8. Drücke (B), um das Rosalina-Menü zu schließen
9. Drücke (Home) und schließe die Download-Spiel Anwendung
10. Starte die Download-Spiel Anwendung erneut
11. Your console should load the Homebrew Launcher
12. Starte slotTool aus der Liste der Homebrew-Anwendungen
13. Wähle “RESTORE original wifi slots 1,2,3”
14. Your console will then reboot

---

Fortfahren mit Setup fertigstellen