Installing boot9strap (SSLoth-Browser)

---

Für Support auf Englisch, bitte um Hilfe auf dem Nintendo Homebrew Discord.

Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.

---

Technische Details (optional)

In order to exploit the Browser application, we need to bypass the browser version check, which is designed to disallow the use of the browser without updating to the latest system version.

A public proxy server is available, which, with the help of the SSLoth exploit, can bypass this check.

Once the bypass is active, an exploit webpage will be accessible which will do the rest of the job.

For technical details on the exploits that you will be using on this page, see here (SSLoth) and here (universal-otherapp).

Kompatibilitätshinweise

SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing the use of new-browserhax or old-browserhax (compatible with versions 11.4.0 through 11.13.0 in all regions), which can then be used in conjunction with universal-otherapp.

If you have updated your console to your current version using a cartridge, you will not be able to bypass the browser version check. If this is the case, stay on your current firmware and ask Nintendo Homebrew on Discord for help.

Was du brauchst

• Die neueste Version vom SafeB9SInstaller (Direkter Download)
• Die neueste Version von boot9strap (Direkter Download)
• Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
• Die neueste Version von universal-otherapp (otherapp.bin)

Abschnitt I - Vorbereitungen

In this section, you will copy the files needed to trigger both browserhax and universal-otherapp.

1. Power off your console
2. Stecke deine SD-Karte in deinen Computer
3. Copy otherapp.bin to the root of your SD card and rename it to arm11code.bin
   • The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
   • If you do not see the .bin extension, do not add it to the end of the filename
4. Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
5. Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
6. Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
7. Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
8. Reinsert your SD card into your console
9. Power on your console

Section II - SSLoth

In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.

If you haven’t already, make sure you have a working Internet connection set up on your console.

1. Launch the System Settings application
2. Navigate to Internet Settings -> Connection Settings
3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
4. Set “Proxy Settings” to “Yes”, then click Detailed Setup
5. Set the Proxy Server to ssloth.nintendohomebrew.com, and the Port to 8080
6. Click OK, then click Save
7. When prompted, click “Test” to perform the connection test
   • Der Test sollte erfolgreich sein

8. Click “OK” to continue

9. Press “Back” twice, then “Close” to go back to the HOME Menu

Section III - Launching SafeB9SInstaller

In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.

1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
   • If you are unable to open the camera, open the Internet Browser and manually type the URL instead (https://zoogie.github.io/web/nbhax/)
2. Tap the QR code button and scan this QR code
   • If you get a crash or an error code, follow this troubleshooting guide
   • If you get a security certificate warning, press (A) to allow the connection
3. Tap the “PROCEED TO HAXX” button
4. Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
   • If you get an error, follow this troubleshooting guide

Section IV - Installing boot9strap

In this section, you will install custom firmware onto your console.

1. Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
   • If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
2. Once it is complete, press (A) to reboot your console
3. Your console should have booted into the Luma3DS configuration menu
   • Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
   • For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
   • If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
4. Drücke (Start) zum Speichern und neustarten

Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.

• Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
• Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.

Section V - Restoring default proxy

In this section, you will restore the Internet settings back to normal.

1. Launch the System Settings application
2. Navigate to Internet Settings -> Connection Settings
3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
4. Set “Proxy Settings” to “No”
5. Click OK, then click Save
6. When prompted, click “Test” to perform the connection test
   • Der Test sollte erfolgreich sein
7. Power off your console

---

Fortfahren mit Setup fertigstellen