Installing boot9strap (SSLoth-Browser)

---

Para soporte en inglés, pide ayuda en el Discord de Nintendo Homebrew.

Si te gustó esta guía, aceptamos Donaciones.

---

Technical Details (optional)

In order to exploit the Browser application, we need to bypass the browser version check, which is designed to disallow the use of the browser without updating to the latest system version.

A public proxy server is available, which, with the help of the SSLoth exploit, can bypass this check.

Once the bypass is active, an exploit webpage will be accessible which will do the rest of the job.

For technical details on the exploits that you will be using on this page, see here (SSLoth) and here (universal-otherapp).

Compatibility Notes

SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing the use of new-browserhax or old-browserhax (compatible with versions 11.4.0 through 11.13.0 in all regions), which can then be used in conjunction with universal-otherapp.

If you have updated your console to your current version using a cartridge, you will not be able to bypass the browser version check. If this is the case, stay on your current firmware and ask Nintendo Homebrew on Discord for help.

Qué necesitas

• The latest release of SafeB9SInstaller (direct download)
• The latest release of boot9strap (direct download)
• The latest release of Luma3DS (the Luma3DS .zip file)
• The latest release of universal-otherapp (otherapp.bin)

Sección I - Preparativos

In this section, you will copy the files needed to trigger both browserhax and universal-otherapp.

1. Power off your console
2. Inserta tu tarjeta SD en tu computadora
3. Copy otherapp.bin to the root of your SD card and rename it to arm11code.bin
   • La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
   • If you do not see the .bin extension, do not add it to the end of the filename
4. Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
5. Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
6. Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
7. Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
8. Reinsert your SD card into your console
9. Power on your console

Section II - SSLoth

In this section, you will change your Internet connection settings to use a proxy network designed to bypass the browser version check, allowing the browser to function without a system update. This will allow you to access the browser exploit webpage in the next section.

If you haven’t already, make sure you have a working Internet connection set up on your console.

1. Launch the System Settings application
2. Navigate to Internet Settings -> Connection Settings
3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
4. Set “Proxy Settings” to “Yes”, then click Detailed Setup
5. Set the Proxy Server to ssloth.nintendohomebrew.com, and the Port to 8080
6. Click OK, then click Save
7. When prompted, click “Test” to perform the connection test
   • The test should succeed

8. Click “OK” to continue

9. Press “Back” twice, then “Close” to go back to the HOME Menu

Section III - Launching SafeB9SInstaller

In this section, you will visit the browser exploit webpage, which will use universal-otherapp to launch the boot9strap (custom firmware) installer.

1. On the HOME Menu, press the Left and Right shoulder buttons at the same time to open the camera
   • If you are unable to open the camera, open the Internet Browser and manually type the URL instead (https://zoogie.github.io/web/nbhax/)
2. Tap the QR code button and scan this QR code
   • If you get a crash or an error code, follow this troubleshooting guide
   • If you get a security certificate warning, press (A) to allow the connection
3. Tap the “PROCEED TO HAXX” button
4. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
   • If you get an error, follow this troubleshooting guide

Section IV - Installing boot9strap

In this section, you will install custom firmware onto your console.

1. When prompted, input the key combo given on the top screen to install boot9strap
   • If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
2. Once it is complete, press (A) to reboot your console
3. Your console should have booted into the Luma3DS configuration menu
   • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
   • For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
   • If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
4. Presiona (Start) para guardar y reiniciar

At this point, your console will boot to Luma3DS by default.

• Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
• On the next page, you will install useful homebrew applications to complete your setup.

Section V - Restoring default proxy

In this section, you will restore the Internet settings back to normal.

1. Launch the System Settings application
2. Navigate to Internet Settings -> Connection Settings
3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
4. Set “Proxy Settings” to “No”
5. Click OK, then click Save
6. When prompted, click “Test” to perform the connection test
   • The test should succeed
7. Power off your console

---

Continúa en Finalizar instalación