---
title: "新手入門"
---

{% include toc title="條目內容" %}

Before starting this guide, we will see if custom firmware is already installed and check the current system version of your device.

#### 第一節 — 檢查自製韌體

1. 關閉您的主機
1. 按住「Select」鍵
1. 在開機時按住「Select」鍵
1. If you do not see an unusual menu (e.g. "Luma3DS Configuration"), you may proceed to the next section

If you see an unusual menu, STOP - you already have custom firmware! Continue from [here](checking-for-cfw#what-to-do-next).
{: .notice--warning}

#### Section II - System Version Check

1. 開啟系統設定
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")

#### Section III - Select a Method

Use the version table below to select a method. A few things to note:
  + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between.
  + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
  + The number and letter after the system version are not important.

<table>
  <colgroup>
    <col span="1" style="width: 20%;">
    <col span="1" style="width: 40%;">
  </colgroup>
  <thead>
    <tr>
      <th style="text-align: center">System Version</th>
      <th style="text-align: center">What to do</th>
    </tr>
  </thead>
  <tbody>
    <tr>
      <td style="text-align: center; font-weight: bold;">11.15.0 (latest version)</td>
      <td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
    </tr>
	  <tr>
      <td style="text-align: center; font-weight: bold;">11.4.0 to 11.14.0</td>
      <td style="text-align: center; font-weight: bold;">透過系統設定將您的 3DS 更新至最新版本</td>
    </tr>
    <tr>
      <td style="text-align: center; font-weight: bold;">1.0.0 to 11.3.0</td>
      <td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(soundhax)">安裝boot9strap (透過 Soundhax)</a></td>
    </tr>
  </tbody>
</table>

---
#### Alternate Methods

If possible, you should follow one of the software methods listed above.

Otherwise, methods that work on all versions are available, but require additional hardware:

1. [安裝 boot9strap (透過 kartdlphax)](installing-boot9strap-(kartdlphax)) - 需要一台已改機過的 3DS 以及馬力歐賽車 7 (Mario Kart 7)
1. [ntrboot](ntrboot) - 需備有相容的 DS 燒錄卡
1. [安裝 boot9strap (透過硬改)](installing-boot9strap-(hardmod)) - 需要焊接