Problembehandlung

Für Support auf Englisch, bitte um Hilfe auf dem Nintendo Homebrew Discord.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.

Diese Seite gibt Anweisungen und Lösungen für oft auftretende Fehler. Wenn diese Seite das Problem nicht lösen kann, tritt bitte Nintendo Homebrew on Discord und beschreibe dein Problem, zusätzlich mit dem, was du schon versucht hast.

Inhaltsverzeichnis

Used on multiple pages:

Guide pages:

Probleme nach der Installation:

Issues with SafeB9SInstaller

Before opening SafeB9SInstaller

Failed to open SafeB9SInstaller.bin

Die Datei SafeB9SInstaller.bin fehlt oder ist falsch platziert. Lade die neueste Version von SafeB9SInstaller herunter, entpacke sie und platziere SafeB9SInstaller.bin im Stammverzeichnis deiner SD-Karte. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.

SigHaxed FIRM was not installed! Check lower screen for more info.

MicroSD Card - init failed

Your SD card is most likely acting weird. Try reformatting your SD card (Windows, macOS, Linux). If this doesn’t work, try another SD card.

SigHaxed FIRM - File not found

Dir fehlt die boot9strap.firm und die boot9strap.firm.sha Datei im boot9strap Ordner, oder der boot9strap Ordner ist falsch bennant. Lade dir neuste Version von boot9strap herunter und platziere boot9strap.firm und boot9strap.firm.sha in deinen boot9strap Ordner.

SigHaxed FIRM - invalid FIRM

Es liegt ein Problem mit den ‘boot9strap.firm’ und ‘boot9strap.firm.sha’ Dateien vor. Lade dir neuste Version von boot9strap herunter und platziere boot9strap.firm und boot9strap.firm.sha in deinem boot9strap Ordner.

Secret Sector - File not found

Dir fehlt die secret_sector.bin Datei im boot9strap Ordner, oder dein boot9strap Ordner ist falsch benannt. Lade secret_sector.bin mit einem Torrent Client herunter, und platziere sie in deinem boot9strap Ordner.

Etwas anderes

Tritt Nintendo Homebrew auf Discord bei und beschreibe die Nachricht, die du siehst.

Seedminer

Mehrere Ordner mit langem Namen im Nintendo 3DS Ordner

This occurs when you use your SD card in multiple 3DS consoles and is intended to prevent inadvertently merging data that would not be valid on other consoles. Um herauszufinden, welcher der langen Ordner der richtige ist, folge diesen Anweisungen:

  1. Benenne den Nintendo 3DS Ordner zu BACKUP_Nintendo 3DS um
  2. Reinsert your SD card into your console
  3. Power on your console
  4. Wait for the console to generate the SD card data
    • Deine Apps werden verschwunden sein. Das ist normal und wird gleich behoben
  5. Power off your console
  6. Stecke deine SD-Karte in deinen Computer
  7. Navigiere zum “Nintendo 3DS”-Ordner auf deiner SD-Karte
  8. Kopiere den 32 Buchstaben langen Ordnernamen von dem Ordner, den du siehst
  9. Lösche den Nintendo 3DS Ordner
  10. Benenne den BACKUP_Nintendo 3DS Ordner zu Nintendo 3DS um
Bruteforce Movable springt zu Schritt 4

Die Webseite hat deine movable.sed mit deiner Freundescode- und ID0-Kombination bereits herausgefunden. Du kannst die movable.sed Datei benutzen, die dir die Seite gibt.

Important! You have been locked out of the automated part1 dumper system...

Dein Freundescode wurde von dem Bot blockiert, da dein 3DS es nicht geschafft hat, den Bot als Freund hinzuzufügen. Stell sicher, dass dein 3DS korrekt mit dem Internet verbunden ist, und bitte in Nintendo Homebrew on Discord auf Englisch um eine Entperrung.

We were unable to successfully complete your bruteforce request. :`(

Die Webseite hat festgestellt, dass deine movable.sed nicht brute-forcebar ist. Stell sicher, dass du der Seite die richtige ID0 gegeben hast. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.

New 3DS users can follow Installing boot9strap (super-skaterhax), while Old 3DS users can follow Installing boot9strap (MSET9). If you cannot do MSET9 for any reason, you will need to follow a method that requires additional games or hardware.

BannerBomb3

Multiple ID1 folders inside of ID0

This can occur if you’ve used multiple SD cards on a 3DS and then merged the contents of the SD cards together. This is done to prevent conflicting, valid data from being merged together.

To fix this, you will need to determine which folder contains your data. Usually, this will be the larger (or largest) of the folders. Backup and delete the smaller one(s), then create a Nintendo DSiWare folder in the one that remains and move F00D43D5.bin to that location.

DSiWare Management Menü stürzt ab, ohne BB3 multihax menu anzuzeigen

Stelle sicher, dass F00D43D5.bin die einzige Datei in Nintendo 3DS -> <ID0> -> <ID1>-> Nintendo DSiWare` ist. If it is, then re-create it with the Bannerbomb3 Injector.

Stelle außerdem sicher, dass bb3.bin im Stammverzeichnis der SD-Karte liegt. If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.

If neither of these solutions fixes this problem, then custom firmware may have been uninstalled on this console in a way that makes this method impossible to perform. Wenn das der Fall ist, trete dem Nintendo Homebrew on Discord Server bei und frage, auf Englisch, nach Hilfe.

Nintendo DSiWare-Datenverwaltung zeigt "Es wurden keine Softwaredaten gefunden."

F00D43D5.bin fehlt in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. Stelle sicher, dass Nintendo DSiWare korrekt geschrieben und Leerzeichen enthält. Groß-/Kleinschreibung spielt hierbei keine Rolle.

Nintendo DSiWare-Datenverwaltung zeigt ein Fragezeichen

Möglicherweise gibt es ein Problem mit deiner F00D43D5.bin Datei (sie kann beschädigt oder für den falschen 3DS bestimmt sein). Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.

Installing boot9strap (Fredtool-Inject)

Error on DSiHaxInjector page

Stelle sicher, dass deine movable.sed und das DSiWare-Backup von derselben Konsole stammen. Eine Unterschied führt zu einem Fehler.

"Haxxxxxxxxx!" erscheint nicht

Es gibt ein Problem mit deiner 42383821.bin Datei (sie ist falsch, fehlt komplett, falsch platziert oder beschädigt). Erstelle deine Dateien mit der DSIHaxInjector_new Seite neu und stelle sicher, dass du die 42383821.bin aus output.zip -> hax in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare platzierst.

DSiWare launches normally

Haxxxxxxxxx! wurde nicht von deiner SD-Karte in deinen Systemspeicher kopiert.

SD-Karte ist in Flipnote ausgegraut

Flipnote kann eine Weile benötigen, bis es deine Karte einsortiert hat, wenn du eine große SD-Karte benutzt. Warte für ein paar Minuten.

Lenny Gesicht erscheint nicht im SD-Kartenbereich

Du hast den private Ordner von der Frogminer_save .zip nicht in das Stammverzeichnis deiner SD-Karte kopiert.

Flipnote friert ein

Möglicherweise hast du versehentlich den Touchscreen berührt, während du in dem modifizierten Flipnote gewesen bist. Starte die Nintendo DS-Verbindungen erneut und versuche es nochmal. Überprüfe, dass du nicht versehentlich den Touchscreen verwendest.

Grüner Bildschirm nach Einfügen

Die Datei boot.nds fehlt oder ist falsch platziert. Lade die neueste Version von b9stool herunter, und platziere boot.nds im Stammverzeichnis deiner SD-Karte und ersetze die vorhandene Datei.

Weißer Bildschirm nach Einfügen

Es gibt ein Problem mit deiner boot.nds Datei. Lade die neueste Version von b9stool erneut herunter, und platziere boot.nds im Stammverzeichnis deiner SD-Karte und ersetze die vorhandene Datei.

Unable to open Luma3DS configuration menu after running B9STool

Join Nintendo Homebrew on Discord and explain what has happened.

Installing boot9strap (PicHaxx)

"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.

If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.

"An exception occurred" or Errdisp when opening Picross

Your console already has custom firmware. You should check for CFW.

"An error has occurred, forcing the software to close..." (white message box)

There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.

Game starts normally

Your modified 00000001.sav file may be misplaced, or you may have used the wrong movable.sed when creating it. Re-generate your movable.sed from Bruteforce Movable, then re-create the save using the PicHaxx Save Tool and place the resulting file (00000001.sav) in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.

Installing boot9strap (Soundhax)

Red/purple/pink and white screen after running Soundhax

If your console is on system version 9.4.0, 9.5.0, or 9.6.0, you may be encountering a bug with an old version of universal-otherapp. Download the latest version from here.

If your console is not on those firmwares, it likely indicates that you already have custom firmware. You should check for CFW.

"An error has occurred, forcing the software to close..." (white message box)

There is an issue with your otherapp.bin file (it is missing, misplaced, or corrupted). Download the latest release of universal-otherapp and place it on the root of your SD card.

"Could not play"

You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Trete Nintendo Homebrew auf Discord für mehr Hilfe bei.

Failed to mount the SD card!

Sichere deine Daten und formatiere deine SD-Karte als FAT32 mit dem empfohlenen Werkzeug je nach Betriebssystem (Windows, macOS, Linux). MiniTool Partition Wizard und das HP Formatierungswerkzeug (HPUSBDisk) sind bekannt für Probleme mit 3DS SD-Karten.

Wenn dies nicht gelingt, benutze eine andere SD-Karte.

Installing boot9strap (SSLoth-Browser)

Red/purple/pink and white screen after running Browserhax

This likely indicates that you already have custom firmware. You should check for CFW.

"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

The file arm11code.bin is missing or misplaced. Lade die neuste Version von universal-otherapp herunter, platziere otherapp.bin im Stammverzeichnis deiner SD-Karte und benenne die Datei zu arm11code.bin um. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.

"An error has occurred, forcing the software to close..." (white message box)

There may be an issue with your arm11code.bin file. Lade die neuste Version von universal-otherapp herunter, platziere otherapp.bin im Stammverzeichnis deiner SD-Karte und benenne die Datei zu arm11code.bin um. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.

You can also try resetting your browser save data:

  1. Launch the browser, then launch the browser settings
  2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
  3. Try the exploit again
Opening the browserhax QR code or URL crashes

Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.

  1. Launch the browser, then launch the browser settings
  2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
  3. Try the exploit again
System Update prompt when opening browser

The SSLoth proxy was incorrectly configured. Re-do the SSLoth section on the page.

Error 032-0420 when opening browser

Follow these steps in order:

  1. Launch System Settings on your console
  2. Navigate to Internet Settings -> Connection Settings
  3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
  4. Set “Proxy Settings” to “No”
  5. Click OK, then click Save
  6. When prompted, click “Test” to perform the connection test
    • Der Test sollte erfolgreich sein
  7. Click “OK” to continue
  8. Press “Back” twice, then “Close” to go back to the HOME Menu
  9. Open the Internet Browser once
  10. If prompted about a system update, press OK
    • This won’t actually update the system
  11. Start again from Section II
Frozen on "Doing agbhax..."

There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.

"PrepareArm9ForTwl returned error c8804631!"

Trete Nintendo Homebrew auf Discord für mehr Hilfe bei.

Failed to mount the SD card!

Sichere deine Daten und formatiere deine SD-Karte als FAT32 mit dem empfohlenen Werkzeug je nach Betriebssystem (Windows, macOS, Linux). MiniTool Partition Wizard und das HP Formatierungswerkzeug (HPUSBDisk) sind bekannt für Probleme mit 3DS SD-Karten.

Wenn dies nicht gelingt, benutze eine andere SD-Karte.

Installing boot9strap (super-skaterhax)

"An error has occurred. Please save your data in any software currently in use, then restart the system."

The date is set incorrectly. To set it correctly, follow these steps:

  1. Select the System Settings icon on the HOME Menu, and tap Open.
  2. Tap Other Settings.
  3. Tap Date & Time.
  4. Tap Today’s date.
  5. Tap Up/Down Arrows to set the correct Day, Month and Year.
  6. Select OK to confirm.

If the problem persists:

  • Ensure that arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, and boot.3dsx are on the root of the SD card (not inside of any folder)
  • Ensure that you selected the correct payload for your region AND system version
  • Ensure that your region settings look like this
  • Try resetting your browser data:
    1. Launch the browser, then launch the browser settings
    2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
    3. Try the exploit again
  • Try changing the system language to something other than the current language
"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).

An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!

This likely indicates that you already have custom firmware. You should check for CFW.

Installing boot9strap (MSET9)

assert(id0_count == 1) AssertionError

You have multiple ID0 folders. To determine the correct folder, follow these instructions:

  1. Benenne den Nintendo 3DS Ordner zu BACKUP_Nintendo 3DS um
  2. Reinsert your SD card into your console
  3. Power on your console
  4. Wait for the console to generate the SD card data
    • Deine Apps werden verschwunden sein. Das ist normal und wird gleich behoben
  5. Power off your console
  6. Stecke deine SD-Karte in deinen Computer
  7. Navigiere zum “Nintendo 3DS”-Ordner auf deiner SD-Karte
  8. Write down the first few characters of the folder you see
    • This is your true ID0, which we will keep in the real Nintendo 3DS folder
  9. Delete the ID0 from the current Nintendo 3DS folder
  10. Move the true ID0 folder from the BACKUP_Nintendo 3DS folder to the Nintendo 3DS folder
  11. If it exists, move the Private folder from the BACKUP_Nintendo 3DS folder to the Nintendo 3DS folder

Once you’ve done this, continue from Section I Step 7.

(title/import).db does not exist, create them now?" / invalid database

Full error messages:

  • “Nintendo 3DS/<ID0>/<ID1>/dbs/<import.db and/or title.db> does not exist on SD card! Create them now? (type yes/no)”
  • “Invalid database”

This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.

  1. Type “yes”, then press Enter
  2. Insert the SD card into your console
  3. Power on your console
  4. Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
  5. Power off your console
  6. Insert the SD card into your computer
  7. Return to Section I Step 7
[WinError 5] Access is denied

The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.

UnboundLocalError: cannot access local variable 'haxid1_path'

This can happen when Option 1 stopped because of an error and there is an incomplete installation.

  1. Close the script window
  2. Execute the mset9.py script on the root of the SD card
    • Windows: Double-click mset9.bat +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
    • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
    • You should see a window that says “MSET9 … SETUP by zoogie”
  3. Type the number corresponding to your console model and version, then press Enter
  4. Type 4, then press Enter to remove MSET9
  5. Return to the beginning of Section I
Red screen after reinserting SD card (Section II Step 11)

You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.

Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)

assert(mii_ok==1) AssertionError

Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.

  1. Close the script window
  2. Execute the mset9.py script on the root of the SD card
    • Windows: Double-click mset9.bat
      • If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
    • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
    • You should see a window that says “MSET9 … SETUP by zoogie”
  3. Type the number corresponding to your console model and version, then press Enter
  4. Type 4, then press Enter to remove MSET9
  5. Insert the SD card into your console
  6. Power on your console
  7. Launch Mii Maker
  8. Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
  9. Power off your console
  10. Insert the SD card into your computer
  11. Return to Section I Step 7
System Settings loading infinitely after reinserting the SD card

You most likely did something different from the MSET9 instructions, or selected the wrong model or version.

  1. Close the script window
  2. Execute the mset9.py script on the root of the SD card
    • Windows: Double-click mset9.bat
      • If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
    • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
    • You should see a window that says “MSET9 … SETUP by zoogie”
  3. Type the number corresponding to your console model and version, then press Enter
  4. Type 3, then press Enter
  5. Once the window says “Deleting… done.”, insert the SD card into your console
  6. Power on your console
  7. Return to Section II Step 1

If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:

  1. Close the script window
  2. Execute the mset9.py script on the root of the SD card
    • Windows: Double-click mset9.bat
      • If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
    • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
    • You should see a window that says “MSET9 … SETUP by zoogie”
  3. Type the number corresponding to your console model and version, then press Enter
  4. Type 4, then press Enter to remove MSET9
  5. Insert the SD card into your console
  6. Power on your console
  7. Launch Mii Maker
  8. Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
  9. Power off your console
  10. Insert the SD card into your computer
  11. Return to Section I Step 7

Finalizing Setup

Unable to update console

The steps below can be attempted in any order, but are listed from easiest to hardest to perform.

  1. Set your DNS settings to “Auto”
  2. Move closer to your WiFi router
  3. Update from Safe Mode by turning off the console, holding (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A) on boot, and following the on-screen prompts
  4. Delete your WiFi connection, then reconnect to your WiFi again
  5. Reboot your WiFi router
  6. Connect to a different WiFi connection, like a mobile hotspot
  7. Nintendo servers may be down; Try again later
  8. If you still get an error, follow CTRTransfer, then try again
  9. For further support (in English), join Nintendo Homebrew on Discord
Error #02: Missing essential.exefs

You said ‘No’ to the “Make essential files backup?” prompt in GodMode9. Power off your console, power it on while holding (Start) to re-enter GodMode9, say ‘Yes’ to the prompt, then try again.

Unable to open GodMode9 or Error #03: Missing files

You did not copy everything from finalize.zip to the root of your SD card. Remember, your SD card should have at least these files:

Error #04: No space

You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. If you don’t have enough space, follow these steps:

  1. Power off your console
  2. Stecke deine SD-Karte in deinen Computer
  3. Copy the Nintendo 3DS folder from the root of your SD card to your computer
  4. Delete the Nintendo 3DS folder from the SD card
  5. Reinsert your SD card into your console
  6. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
  7. Press the (Home) button
  8. Wähle “Scripts”
  9. Select “finalize”
  10. Press (A) to create a NAND backup
    • This may take around fifteen minutes
  11. Press (A) again
    • The console should automatically power off
  12. Stecke deine SD-Karte in deinen Computer
  13. Copy the files in /gm9/backups/ on your SD to a safe location on your computer
  14. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card
  15. Copy the Nintendo 3DS folder from your computer to the root of your SD card
  16. Delete the Nintendo 3DS folder from your computer

Now that you have your NAND backup in a safe place:

  1. Reinsert your SD card into your console
  2. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
  3. Press the (Home) button
  4. Wähle “Scripts”
  5. Select “finalize”
  6. Continue the script as normal
    • The NAND backup will be automatically skipped
Information #05: No title database

Press (A) to import a title database, unlock SysNAND writing by entering the buttons on-screen, then continue the script as normal.

Error #06 or "Error: Could not open directory" when attempting a NAND backup

Make sure you have at least 1.3GB available in your SD card. If you don’t have enough space, follow these steps:

  1. Power off your console
  2. Stecke deine SD-Karte in deinen Computer
  3. Copy the Nintendo 3DS folder from the root of your SD card to your computer
  4. Delete the Nintendo 3DS folder from the SD card
  5. Reinsert your SD card into your console
  6. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
  7. Perform a NAND Backup
  8. Copy the files in gm9/out on your SD to a safe location on your computer
  9. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card, keeping essential.exefs in /gm9/out/
  10. Copy the Nintendo 3DS folder from your computer to the root of your SD card
  11. Delete the Nintendo 3DS folder from your computer

If you have enough space on your SD card, your SD might be corrupted or faulty. Check your SD card for any errors by following the guide according to your computer’s operating system: Windows, Linux, macOS.

Error #09: Unsupported GodMode9 version

You are somehow running a version of GodMode9 not packaged with the script. Make sure you copied the contents of finalize.zip to the root of your SD card and that you are holding START while powering on your console.

Error #11: Missing donor database

You did not copy everything from finalize.zip to the root of your SD card. Remember, your SD card should have at least these files:

Error #12: Copy (file).db fail

Ensure that your SD card is not locked. If the SD card is not locked and you continue to get this error, join Nintendo Homebrew on Discord for assistance.

Information #17: Duplicate NAND backup

The script has detected that the Nintendo 3DS folder is missing AND that you have already made a NAND backup before. If you intend to install homebrew applications, you should do the following:

  1. Press (B) to cancel making another NAND backup
  2. Hold (R) and press (Start) at the same time to power off your console
  3. Copy the contents of /gm9/backups/ to a safe location on your computer
  4. Delete /gm9/backups/ from your SD card
  5. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card
    • If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it
  6. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
  7. Drücke (Home), um das Aktionsmenü aufzurufen
  8. Wähle “Scripts”
  9. Select “finalize”
  10. Follow the prompts in the script, answering any questions that you are asked
Error #18: MSET9 detected

You didn’t remove MSET9 when prompted to. Follow Section IV - Removing MSET9, then re-run the script.

Boot issues on consoles with custom firmware

The steps detailed here generally assume that your console has a modern custom firmware setup (boot9strap + Luma3DS 8.0 or greater). If your console is running an older homebrew setup (for example, something based on arm9loaderhax or menuhax), you should update your setup before trying these instructions.

Power/notification light indicators

My console powers off when I try to turn it on, and/or the notification LED shows a color on boot

There is an issue with your boot.firm file. If you’re running boot9strap 1.4, your 3DS notification LED may flash a certain color. This color is used to diagnose issues involving your boot.firm file on SD card or internal memory. On older versions of boot9strap, the blue light will power off almost immediately when trying to turn on the console.

If the notification LED flashes:

  • White: Your 3DS was not able to find boot.firm on your SD card or on internal memory.
  • Magenta: Your 3DS was not able to find boot.firm on your SD card. It was able to find boot.firm on internal memory, but the file is corrupted.
  • Red: Your 3DS was able to find boot.firm on both your SD card and on internal memory, but both files are corrupted.

You can get a new boot.firm file by downloading the latest release of Luma3DS, extracting it, and placing boot.firm on the root of your SD card. If your boot.firm file is consistently being detected as corrupted, you may want to check your SD card for errors (Windows, Linux, or macOS). Also, note that the 3DS tends to have issues with files extracted using WinRAR.

If you hear a “popping sound”, potentially accompanied with the backlight turning on for a split second, there is a hardware issue with your console (such as a disconnected backlight cable). You may be able to get your console to boot by holding it at certain angles.

My console gets stuck on a black screen with blue power light staying on

The steps below can be attempted in any order, but are listed from least to most time-consuming.

  1. Power off your console, remove the SD card, re-insert it, then power on your console.
  2. Power off your console, eject the game cartridge if inserted, power on your console, then wait up to ten minutes. If your console boots within ten minutes, the issue has been fixed and is unlikely to reoccur
  3. Rename the Nintendo 3DS folder on your SD card to Nintendo 3DS_BACKUP, then attempt to boot. If your console successfully boots, there is some issue within your Nintendo 3DS folder. Try clearing HOME Menu extdata:
    • Navigate to /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/
    • Delete the corresponding folder for your 3DS region:
      • EUR-Region: 00000098
      • JPN-Region: 00000082
      • USA-Region: 0000008f
      • CHN-Region: 000000A1
      • KOR-Region: 000000A9
      • TWN-Region: 000000B1
  4. Try booting into recovery mode and updating your system:
    • Power off your console
    • Hold (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A)
    • Power on your console
    • If you were successful, the console will boot to an “update your system” screen
  5. Follow the CTRTransfer guide
  6. For further support, ask for help at Nintendo Homebrew on Discord

Error message on boot

"An error has occurred: Failed to apply 1 FIRM patch(es)" or "An exception has occurred -- Current process: pm"

Your Luma3DS version is outdated. Download the latest release of Luma3DS and place boot.firm on the root of your SD card, replacing any existing file. Make sure you are extracting the ZIP file with any tool other than WinRAR, as it is known to cause issues with 3DS-related files.

"Unable to mount CTRNAND or load the CTRNAND FIRM. Please use an external one."

There are a number of reasons as to why this could be happening. In any case, this error can usually be fixed by following the CTRTransfer guide.

"An error has occurred. Hold down the POWER button to turn off the power..."

ARM11 exception handlers are disabled, or custom firmware is not installed. Try enabling ARM11 exception handlers: + Power off your console + Hold (Select) + Power on your console, while still holding (Select) + If the “Disable ARM11 exception handlers” box is checked, uncheck it

HOME Menu is missing installed applications

This could be caused by various reasons, but most likely because your SD card is not being read by the system. You can check if your SD is being read by holding SELECT on boot and checking the yellow text on the bottom screen; if it says “Booted from CTRNAND via B9S”, then your console is booting from the internal memory and not from the SD card. If this is the case, attempt the steps below, which are listed from easiest to hardest:

  1. Power off your console, remove the SD card, re-insert it, then power on your console
  2. Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
  3. Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux (this will wipe your SD card data)
  4. Test your SD card for errors by following the guide according to your computer’s operating system: Windows, Linux, macOS. If your SD card is marked as faulty, then you will have to replace your SD card
  5. Your SD card slot may be broken. Join Nintendo Homebrew on Discord for further assistance
Blue "BOOTROM ERROR" screen

Your console is likely hard-bricked. You will need to buy an ntrboot flashcart to reinstall boot9strap in order to attempt to fix your console. This may also indicate a hardware issue that cannot be fixed. In any case, join Nintendo Homebrew on Discord for assistance. + It is also possible that someone has set a boot-time splash screen that just looks like a brick. Try leaving your console powered on, waiting on the blue screen, for five minutes.

Some other error

Please take a photo of the error and join Nintendo Homebrew on Discord for assistance.

Software issues on consoles with custom firmware

DSi / DS functionality is broken or has been replaced with Flipnote Studio
  1. Download the latest release of TWLFix-CFW (the .3dsx file)
  2. Power off your console
  3. Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
  4. Copy TWLFix-CFW.3dsx to the /3ds/ folder on your SD card
  5. Reinsert your SD card into your console
  6. Open the Homebrew Launcher
  7. Launch TWLFix-CFW from the list of homebrew
  8. Press (A) to uninstall the broken TWL titles
  9. Press (Start) to reboot the console
  10. Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • The update will see that the essential TWL titles have been uninstalled, and will redownload and reinstall them
  11. Once the update is complete, tap “OK” to reboot the console
GBA Virtual Console and/or Safe Mode functionality is broken

Your console is running Luma3DS 6.6 or older, likely via arm9loaderhax. You should follow A9LH to B9S to update your console to a modern custom firmware environment.

Extended memory mode games (Pokemon Sun/Moon, Smash, etc.) don't work

This can occur after a CTRTransfer or region change on Old 3DS / 2DS. You will need to system format your console to fix this issue.

Exception screen when booting/loading an application

Look for your exception screen in this page. If you weren’t able to find your error or the instructions didn’t work, join Nintendo Homebrew on Discord for further assistance.

Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher

Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of menuhax67 (the menuhax .zip), then follow the “Uninstall menuhax67” section here.

Other troubleshooting

Clear HOME Menu extdata
  1. Power off your console
  2. Stecke deine SD-Karte in deinen Computer
  3. Navigate to the /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ folder on your SD card
  4. Delete the corresponding folder for your 3DS region:
    • EUR-Region: 00000098
    • JPN-Region: 00000082
    • USA-Region: 0000008f
    • CHN-Region: 000000A1
    • KOR-Region: 000000A9
    • TWN-Region: 000000B1
  5. Reinsert your SD card into your console
Clear HOME Menu theme data
  1. Power off your console
  2. Stecke deine SD-Karte in deinen Computer
  3. Navigate to the /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ folder on your SD card
  4. Delete the corresponding folder for your 3DS region:
    • EUR Region: 000002ce
    • JPN Region: 000002cc
    • USA Region: 000002cd
  5. Reinsert your SD card into your console
Manually entering Homebrew Launcher

If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need boot.3dsx and boot.firm on the root of your SD card.)

  1. Launch the Download Play application ()
  2. Wait until you see the Nintendo 3DS and Nintendo DS buttons
  3. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
  4. Wähle “Miscellaneous options”
  5. Wähle “Switch the hb. title to the current app.”
  6. Drücke (B) um fortzufahren
  7. Drücke (B), um zum Rosalina-Hauptmenü zurückzukehren
  8. Drücke (B), um das Rosalina-Menü zu schließen
  9. Press (Home) to suspend Download Play
  10. Press the “Close” button on the bottom screen to close Download Play
  11. Re-launch the Download Play application
  12. Your console should load the Homebrew Launcher
    • If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card
Turning off Parental Controls

You can disable the Parental Controls feature by going to System Settings -> Parental Controls and inserting the PIN, then pressing “Clear Settings”, then “Delete” to remove it. However, if you do not know the PIN and therefore cannot access the console’s settings, you will need to disable it. In order to do this, you need to obtain your console’s master key (mkey):

  1. Go to this website
  2. Fill the following boxes with the information:
    • Device Type: Select “3DS” (the same applies if you are using a 2DS, New 3DS (XL/LL) or New 2DS (XL/LL))
    • System Date: The day and month your console’s clock is set to
    • Inquiry Number: Can be obtained by pressing “Forgot PIN” then “I Forgot” in the Parental Controls screen
  3. After you have obtained your mkey, press OK on the screen you have obtained your Inquiry Number, then input the master key
  4. Press “Clear Settings”, then “Delete” to remove all Parental Controls data