---
title: "Installing boot9strap (SafeB9SInstaller)"
---

{% include toc title="Table of Contents" %}

### Instructions

#### Section I - Launching SafeB9SInstaller

1. Launch udsploit from the list of homebrew
1. Once you see `patching kernel... done`, press (Start) to exit udsploit
  + Isto pode levar várias tentativas
  + Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente
1. Launch safehax from the list of homebrew
  + If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on
  + If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
  + Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente
1. Se o exploit tiver sucesso, você terá entrado no SafeB9SInstaller

#### Section II - Installing boot9strap

1. Espere todos as verificações de segurança finalizarem
1. Quando solicitado, aperte a sequência de botões dada para instalar o boot9strap
1. Once it is complete, press (A) to reboot your device

#### Section III - Configuring Luma3DS

1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use o botão (A) e os botões direcionais para ativar as seguintes opções:
  + **"Show NAND or user string in System Settings"**
1. Aperte (Start) para salvar e reiniciar
  + If you get an error, just continue to the next page

At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.

___

### Continue to [Finalizing Setup](finalizing-setup)
{: .notice--primary}