--- title: "Finalizin' Setup" --- {% include toc title="Table of Contents" %} ### Required Reading The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND. In this case, we are using Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to patch the device, allowing it to run homebrew software. On this page, we will make critical system file backups and install the following homebrew programs: + **FBI** *(installs CIA formatted applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* + **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over Wi-Fi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* It is not recommended to skip downloading any of these applications, as many of them will be used later on this page. At the end of this page, your SD card will be cleaned up by removing unnecessary installation files. {: .notice--warning} ### Compatibility Notes If your **New 3DS** was on version 2.1.0 before following this guide, you should [restore your NAND backup](godmode9-usage#restoring-a-nand-backup) before continuing. This likely doesn't apply to you unless you were following this guide in 2017. {: .notice--warning} If your previous CFW setup was EmuNAND-based and you wish to move the contents of your EmuNAND/RedNAND to SysNAND, follow [Move EmuNAND](move-emunand) before following this page. If you don't know what an EmuNAND is, this doesn't apply to you. {: .notice--info} ### What You Need * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file) * The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file) * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file) * The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file) * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files) * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file) ### Instructions #### Section I - Prep Work In this section, you will copy the files necessary to follow the rest of the instructions on this page. 1. Power off ye device 1. Insert ye SD card into ye computer 1. Create a folder named `cias` on th' root 'o ye SD card if it does not already exist 1. Copy all of the CIA files (`Anemone3DS.cia`, `Checkpoint.cia`, `FBI.cia`, `Homebrew_Launcher.cia`, and `Universal-Updater.cia`) to the `/cias/` folder on your SD card 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Copy `FBI.3dsx` to th' `/3ds/` folder on ye SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from th' GodMode9 `.zip` to th' `/luma/payloads/` folder on ye SD card 1. Copy th' `gm9` folder from th' GodMode9 `.zip` to th' root 'o ye SD card 1. Reinsert ye SD card into ye device 1. Power on your device The screenshots below indicate the minimum SD card layout that is required to follow this page. You may have extra files or folders on your SD card, depending on your previous setup or the method that you followed. ![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }}) {: .notice--info} ![]({{ "/images/screenshots/godmode9-location.png" | absolute_url }}) {: .notice--info} #### Section II - Updating the System In this section, you will update your system to the latest version, which is safe to do with custom firmware. 1. Update ye device by goin' to System Settings, then "Other Settings", then goin' all th' way to th' right 'n usin' "System Update" + Updates while usin' B9S + Luma (what ye have) be safe + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section + If this gives you an error, set both your DNS settings and Proxy settings to "auto" + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup) #### Section III - Homebrew Launcher In this section, you will temporarily replace Download Play with Homebrew Launcher (which we need to launch FBI). Download Play will automatically go back to normal once you reboot your device. {% include_relative include/launch-hbl-dlp.txt %} #### Section IV - RTC and DSP Setup In this section, you will sync your 3DS internal clock with the actual time and dump the sound firmware (which is necesssary for some homebrew software to use sound properly). 1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Dump DSP firmware" 1. Press (B) to continue 1. Select "Nullify user time offset" 1. Press (B) to continue 1. Press (B) to return to the Rosalina main menu 1. Press (B) to exit the Rosalina menu #### Section V - Installing CIAs In this section, you will install several useful homebrew applications to HOME Menu. 1. Launch FBI from th' list 'o homebrew 1. Navigate to `SD` -> `cias` 1. Select "\" 1. Select the "Install and delete all CIAs" option, then press (A) to confirm 1. Press (Home), then close Download Play #### Section VI - CTRNAND Luma3DS In this section, you will use a script to copy some of Luma3DS's files to internal memory so that they can be accessed, even without an SD card inserted. 1. Power off ye device 1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 + If you do not boot into GodMode9, ensure that `GodMode9.firm` is in `/luma/payloads/` and that `payloads` is correctly spelled 1. If ye be prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If ye be prompted to fix th' RTC date&time, press (A) to do so, then set th' date 'n time, then press (A) to continue 1. Press (Home) to bring up th' action menu 1. Select "Scripts..." 1. Select "GM9Megascript" 1. Select "Scripts from Plailect's Guide" 1. Select "Setup Luma3DS to CTRNAND" 1. When prompted, push (A) to proceed 1. Press (A) to unlock SysNAND (lvl1) writin', then input th' key combo given 1. Press (A) to continue #### Section VII - Cleanup SD Card In this section, you will use a script to remove some unnecessary files from your SD card. 1. Select "Cleanup SD Card" 1. When prompted, push (A) to proceed 1. Press (A) to continue 1. Press (B) to return to the main menu #### Section VIII - Backup Essential Files In this section, you will make backups of files that can be used to recover from software bricks or to recover data. 1. Select "Backup Options" 1. Select "SysNAND Backup" 1. Press (A) to confirm + This process will take some time + If you get an error, look for your issue in the [troubleshooting guide](troubleshooting#finalizing-setup) 1. Press (A) to continue 1. Press (B) to return to the main menu 1. Select "Exit" 1. Press (A) to relock write permissions if prompted 1. Navigate to `[S:] SYSNAND VIRTUAL` 1. Press (A) on `essential.exefs` to select it 1. Select "Copy to 0:/gm9/out" + If you see "Destination already exists", press (A) on "Overwrite file(s)" 1. Press (A) to continue 1. Press (Home) to bring up th' action menu 1. Select "Poweroff system" to power off your device 1. Insert ye SD card into ye computer 1. Copy `__sysnand_##.bin`, `__sysnand_##.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.) + These backups gunna be savin' ye from any brick, 'n they may help ye recover files, especially th' NAND image, if anythin' be off or wrong in th' future 1. Delete `__sysnand_##.bin` and `__sysnand_##.bin.sha` from the `/gm9/out/` folder on your SD card after copying it + The other backup files are negligible in size and may be kept on your SD card for ease of access 1. If you have it, copy the `/luma/backups/` folder on your SD card to a safe location on your computer 1. Reinsert ye SD card into ye device 1. Power on your device ___ You're done! Custom firmware is now fully configured on your device. {: .notice--success} Hello! We're looking for feedback on the overall experience of following our guide. If you'd like to help out, check out the survey [here](https://forms.gle/vZNoc4QLCz5MEXCK7) (only available in English). Thanks! {: .notice--info} ### Information and Notes {% capture notice-6 %} Here are some key combos that you should know: - Holding (Select) on boot will launch the Luma3DS configuration menu. - Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader. - By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu. - Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list. {% endcapture %}
{{ notice-6 | markdownify }}
See [here](https://3ds.eiphax.tech/tips.html) for some suggestions on things to do with custom firmware. {: .notice--info} For information on using GodMode9's various features, check out the [GodMode9 Usage](godmode9-usage) and [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges) pages. {: .notice--info}