---
title: "BannerBomb3 + Fredtool (TWN)"
---

{% include toc title="Table des matières" %}

### Lecture requise

Pour extraire un DSiWare système, nous exploitons une faille dans l'onglet de gestion des données DSiWare présent dans les paramètres système.

To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system to dump the DSi Internet Settings application to the SD root.

Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.

These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose the other method](bannerbomb3).
{: .notice--warning}

### What you need

- Your `movable.sed` file completing [Seedminer](seedminer)
- The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
- The latest release of [b9stool](https://github.com/zoogie/b9sTool/releases/download/v6.1.1/release_6.1.1.zip) (direct download)
- The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) (`Frogminer_save.zip`)

#### Section I - Vérification de la présence d’un CFW

{% include_relative include/cfw-check-fredtool.txt %}

#### Section II - Préparatifs

1. Éteignez votre 3DS
1. Insérez votre carte SD dans votre ordinateur
1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD
    + La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier
1. Copy `boot.nds` (B9STool) from the release `.zip` to the root of your SD card
1. Copiez le dossier `private` du fichier `.zip` de Frogminer_save vers la racine de votre carte SD
1. Keep your SD card in your computer - there are more things to do in the next section

![]({{ "/images/screenshots/fredtool/fredtool-twn-root-layout.png" | absolute_url }})
{: .notice--info}

#### Section III - BannerBomb3

1. Open the [DSIHaxInjector V2](https://jenkins.nelthorya.net/job/DSIHaxInjector%20v2/build?delay=0sec) website on your computer
1. Under the "Username" field, enter any alphanumeric name (no spaces or special characters)
1. Under the "MovableSed" field, upload your `movable.sed`using the "Browse..." option
1. Click "Build"
  + Wait a few seconds for the build process to complete
1. In the Build History section on the left, type the Username into the "Filter Builds" field
1. Click on the first search result
  + This result should have the latest timestamp
1. Click the "output_(name).zip" link
1. Naviguez vers `Nintendo 3DS` -> `<ID0>` -> `<ID1>` sur votre carte SD
  + L'`<ID0>` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer)
  + L'`<ID1>` est un dossier de 32 caractères à l'intérieur du dossier `<ID0>`
1. Créez un dossier nommé `Nintendo DSiWare` à l'intérieur de `<ID1>`
  + If you already had the folder *and* there are any existing DSiWare backup files (`<8-character-id>.bin`) inside, copy them to your PC and remove them from your SD card
1. Open the output_(name) `.zip` file and navigate to `China_Taiwan` -> `output_setup`
1. Copy all six `.bin` files to the `Nintendo DSiWare` folder
1. Retirez la carte SD de votre ordinateur et réinsérez-là dans votre 3DS
1. Allumez votre console
1. Lancez les Paramètres de la console
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` -> (page 2)
1. Take note of what number is on the DSiWare title on the second page (it will be a number between 1 and 6)
1. Éteignez votre 3DS
1. Insérez votre carte SD dans votre ordinateur
1. Naviguez vers `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` sur votre carte SD 
1. Open the output_(name) `.zip` file and navigate to `China_Taiwan` -> `output_hax`
1. Copy the `.bin` file that is the same number as the one that was on the second page of the DSiWare Management menu to the `Nintendo DSiWare` folder, and overwrite when prompted
1. Allumez votre console
1. Lancez les Paramètres de la console
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card`
1. Wait a while
     + The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the device showing an error message and rebooting
    + If you did not see the purple screen, then something went wrong
1. You should now have the file `42383821.bin` on the root of your SD card
1. Naviguez vers `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` sur votre carte SD 
1. Delete all of the `.bin` files in the `Nintendo DSiWare` folder

#### Section IV - Fredtool

1. Open the [DSIHaxInjector_new](https://jenkins.nelthorya.net/job/DSIHaxInjector_new/build?delay=0sec) website on your computer
1. Under the "Username" field, enter any alphanumeric name (no spaces or special characters)
    + You might want to put in a different name to differentiate it from BannerBomb3's output
1. Under the "DSiBin" field, upload your `42383821.bin` file using the first "Browse..." option
1. Under the "MovableSed" field, upload your `movable.sed` file using the second "Browse..." option
1. Under the "InjectionTarget" field, set the injection target to `DSdownloadplay`(NOT memorypit)
1. Click "Build"
  + Wait a few seconds for the build process to complete
1. In the Build History section on the left, type the Username into the "Filter Builds" field
1. Click on the first search result
  + This result should have the latest timestamp
1. Click the "output_(name).zip" link
1. Naviguez vers `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` sur votre carte SD 
1. Copy the `484E4441.bin`  file from the `hax` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Retirez la carte SD de votre ordinateur et réinsérez-là dans votre 3DS
1. Allumez votre console
1. Lancez les Paramètres de la console
1. Naviguez vers`Gestion des données` -> `DSiWare`
1. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
1. Select “Copy”, then select “OK”
1. Exit System Settings
1. Launch Download Play on your device (the orange icon with a 3DS on it)
1. Sélectionnez "Nintendo DS" 
1. If the exploit was successful, your 3DS will have loaded into the JPN version of Flipnote Studio

#### Section V - Flipnote Exploit

{% include_relative include/install-boot9strap-b9stool.txt method="dsdlp" %}

#### Section VI - Luma3DS Configuration

1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
  + Aux fins de ce guide, ces paramètres seront laissés dans les paramètres par défaut
  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer

#### Section VII - Restoring DS Download Play

1. Naviguez vers `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` sur votre carte SD 
1. Copy the `484E4441.bin`  file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Retirez la carte SD de votre ordinateur et réinsérez-là dans votre 3DS
1. Allumez votre console
1. Lancez les Paramètres de la console
1. Naviguez vers`Gestion des données` -> `DSiWare`
1. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
1. Select “Copy”, then select “OK”
1. Exit System Settings
1. Éteignez votre 3DS

___

### Continuer vers [Finalisation de l'installation](finalizing-setup)
{: .notice--primary}