---
title: "Installing boot9strap (SafeB9SInstaller)"
---

{% include toc title="Tabela de Conteúdo" %}

### Instruções

#### Section I - Launching SafeB9SInstaller

1. Launch udsploit from the list of homebrew
1. Once you see `patching kernel... done`, press (Start) to exit udsploit
  + Isto pode levar várias tentativas
  + Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente
1. Launch safehax from the list of homebrew
  + If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on
  + If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
  + Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente
1. Se o exploit tiver sucesso, você terá entrado no SafeB9SInstaller

#### Seção II - Instalando o boot9strap

1. When prompted, input the key combo given on the top screen to install boot9strap
1. Quando concluído, aperte (A) para reiniciar o seu dispositivo
1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
  + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Aperte (Start) para salvar e reiniciar
  + If you get an error, just continue to the next page

At this point, your console will boot to Luma3DS by default.
  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  + On the next page, you will install useful homebrew applications to complete your setup.


___

### Continue para [Finalizando a instalação](finalizing-setup)
{: .notice--primary}