---
title: "Probleemoplossing"
---

Deze pagina biedt advies voor het oplossen van problemen die algemeen zijn ondervonden. Als je je probleem niet kunt oplossen met het advies op deze pagina, neem dan deel aan [Nintendo Homebrew op Discord](https://discord.gg/MWxPgEp) en beschrijf je probleem, inclusief wat je al hebt geprobeerd.

{% capture compat %}
<summary>Table of Contents</summary>

Used on multiple pages:
* [SafeB9SInstaller](#issues-with-safeb9sinstaller)

Guide pages:
* [Seedminer](#seedminer)
    * [BannerBomb3](#bannerbomb3)
    * [Installing boot9strap (Fredtool-Inject)](#installing-boot9strap-fredtool-inject)
    * [Installing boot9strap (PicHaxx)](#installing-boot9strap-pichaxx)
* [Installing boot9strap (Soundhax)](#installing-boot9strap-soundhax)
* [Installing boot9strap (SSLoth-Browser)](#installing-boot9strap-ssloth-browser)
* [Installing boot9strap (super-skaterhax)](#installing-boot9strap-super-skaterhax)
* [Installing boot9strap (MSET9)](#installing-boot9strap-mset9)

* [Installatie voltooien](#finalizing-setup)

Issues after installation:
* [Boot issues](#boot-issues-on-consoles-with-custom-firmware)
* [Software issues](#software-issues-on-consoles-with-custom-firmware)

{% endcapture %}
<details>{{ compat | markdownify }}</details>
{: .notice--info}

## Problemen met SafeB9SInstaller

### Before opening SafeB9SInstaller

{% capture compat %}
<summary><u>Kan SafeB9SInstaller.bin niet openen</u></summary>

Het bestand `SafeB9SInstaller.bin` ontbreekt of zit in de verkeerde map. Download de nieuwste versie van [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip), pak het uit en plaats `SafeB9SInstaller.bin` op de hoofdmap van je SD-kaart. Voeg de `.bin` extensie niet toe als je het nog niet ziet.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

### SigHaxed FIRM was not installed! Kijk naar het onderste scherm voor meer informatie.

{% capture compat %}
<summary><u>MicroSD Card - init failed</u></summary>

Your SD card is most likely acting weird. Try reformatting your SD card ([Windows](formatting-sd-(windows)), [macOS](formatting-sd-(mac)), [Linux](formatting-sd-(linux))). If this doesn't work, try another SD card.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>SigHaxed FIRM - File not found</u></summary>

Ofwel zitten `boot9strap.firm` en `boot9strap.firm.sha` niet in de `boot9strap` map, of de `boot9strap` map heeft de verkeerde naam. Download de nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) en plaats `boot9strap.firm` en `boot9strap.firm.sha` in de `boot9strap` map.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>SigHaxed FIRM - invalid FIRM</u></summary>

Er is een probleem met je `boot9strap.firm` en `boot9strap.firm.sha` bestanden. Download de nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) opnieuw en plaats `boot9strap.firm` en `boot9strap.firm.sha` in de `boot9strap` map.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Secret Sector - File not found</u></summary>

Je mist `secret_sector.bin` van de `boot9strap` map, of de `boot9strap` map heeft niet de juiste naam. Download [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.lelux.fi%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.loadbt.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.moeking.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.monitorit4.me%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.ololosh.space%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.pomf.se%3a80%2fannounce&tr=udp%3a%2f%2ftracker.srv00.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.theoks.net%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.tracker.cl%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.zerobytes.xyz%3a1337%2fannounce&tr=udp%3a%2f%2ftracker1.bt.moack.co.kr%3a80%2fannounce&tr=udp%3a%2f%2fvibe.sleepyinternetfun.xyz%3a1738%2fannounce&tr=udp%3a%2f%2fwww.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a6969%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2810%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=http%3a%2f%2fopenbittorrent.com%3a80%2fannounce) met behulp van een torrent client en plaats het in de `boot9strap` map.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Something else</u></summary>

Sluit je aan bij [Nintendo Homebrew op Discord](https://discord.gg/MWxPgEp) voor hulp, en beschrijf het bericht dat je ziet.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

## Seedminer

{% capture compat %}
<summary><u>Multiple long folder names in Nintendo 3DS folder</u></summary>

![]({{ "/images/screenshots/multiple-id0.png" | absolute_url }})
{: .notice--info}

This occurs when you use your SD card in multiple 3DS consoles and is intended to prevent inadvertently merging data that would not be valid on other consoles. Om erachter te komen welke lange mapnaam correct is voor je 3DS, volg dan deze instructies:

1. Hernoem de `Nintendo 3DS` map naar `BACKUP_Nintendo 3DS`
1. Stop je SD-kaart terug in je console
1. Zet je console aan
1. Wait for the console to generate the SD card data
    + Je applicaties zullen verdwenen zijn. Dit is normaal en wordt binnenkort opgelost
1. Zet je console uit
1. Plaats je SD kaart in je computer
1. Ga naar de `Nintendo 3DS` map op je SD-kaart
1. Kopieer de 32-tekens lange naam van de map die je ziet
    + Dit is je echte ID0 die je zal gebruiken in [Deel II van Seedminer](seedminer#section-ii---seedminer)
1. Verwijder de `Nintendo 3DS` map
1. Hernoem de `BACKUP_Nintendo 3DS` map naar `Nintendo 3DS`
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Bruteforce Movable skips to step 4</u></summary>

De website heeft al je `movable.sed` gemijnd met je friend code en ID0 combinatie. Je kunt de 'movable.sed' gebruiken die het je biedt.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Important! You have been locked out of the automated part1 dumper system...</u></summary>

Je friend code is geblokkeerd voor het gebruik van de friend code bot omdat je 3DS de bot niet succesvol heeft bevriend. Zorg ervoor dat je 3DS correct is verbonden met het internet, ga dan naar de [Nintendo Homebrew Discord server](https://discord.gg/MWxPgEp) en vraag om ontgrendeld te worden.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>We were unable to successfully complete your bruteforce request. :`(</u></summary>

De website heeft bepaald dat jouw 'movable.sed' niet kan gebruteforced worden. Zorg ervoor dat je de website het juiste ID0 gegeven hebt. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.

New 3DS users can follow [Installing boot9strap (super-skaterhax)](installing-boot9strap-(super-skaterhax)), while Old 3DS users can follow [Installing boot9strap (MSET9)](installing-boot9strap-(mset9)). If you cannot do MSET9 for any reason, you will need to follow a method that requires additional games or hardware.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

## BannerBomb3

{% capture compat %}
<summary><u>Multiple ID1 folders inside of ID0</u></summary>

![]({{ "/images/screenshots/multiple-id1.png" | absolute_url }})

{% include_relative include/id1-check.txt %}

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>DSiWare Management menu crashes without showing BB3 multihax menu</u></summary>
Zorg ervoor dat `F00D43D5.bin` het enige bestand in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` is. If it is, then re-create it with the [Bannerbomb3 Injector](https://zoogie.github.io/web/bb3).

Also, ensure that `bb3.bin` is on the root of the SD card. If it is missing, then download the latest release of [Bannerbomb3](https://github.com/zoogie/Bannerbomb3/releases/download/v3.0/Release_v3.0.zip) (direct download), and copy the `bb3.bin` file from the Release `.zip` to the root of your SD card.

If neither of these solutions fixes this problem, then custom firmware may have been uninstalled on this console in a way that makes this method impossible to perform. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>DSiWare Management menu displays "No accessible software data."</u></summary>

`F00D43D5.bin` bevindt zich niet in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare`. Zorg ervoor dat `Nintendo DSiWare` correct gespeld is en een spatie heeft. Hoofdletters/kleine letters maken niet uit.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>DSiWare Management shows a question mark</u></summary>

Er kan een probleem zijn met je `F00D43D5.bin` bestand (het kan beschadigd zijn of bedoeld voor een andere 3DS). Re-create your `F00D43D5.bin` file with the [Bannerbomb3 Injector](https://zoogie.github.io/web/bb3), ensuring that you use the `movable.sed` file for your console.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

## Installing boot9strap (Fredtool-Inject)

{% capture compat %}
<summary><u>Error on DSiHaxInjector page</u></summary>

Zorg ervoor dat je `movable.sed` en DSiWare back-up van dezelfde console komen. Een mismatch resulteert in een error.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>"Haxxxxxxxxx!" does not appear</u></summary>

Er is een probleem met je `42383821.bin` bestand (het is onjuist, het ontbreekt, werd misplaatst of is beschadigd). Re-create your files with the [DSIHaxInjector_new](https://jenkins.nelthorya.net/job/DSIHaxInjector_new/build?delay=0sec) website and ensure that you place the `42383821.bin` file from `output.zip` -> `hax` in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare`.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>DSiWare launches normally</u></summary>

`Haxxxxxxxxx!` is niet van je SD-kaart naar het systeemgeheugen gekopieerd.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>SD card is grayed out in Flipnote</u></summary>

Flipnote kan een lange tijd nemen om je kaart te indexeren als je een grote SD-kaart hebt. Laat het een aantal minuten blijven zitten.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Lenny face verschijnt niet in SD-kaart sectie</u></summary>

Je hebt de `private` map niet van Frogminer_save `.zip` naar de hoofdmap van je SD-kaart gekopieert.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Flipnote bevriest</u></summary>

Het zou kunnen dat je per ongelijk het touch screen hebt aangeraakt terwijl de gemodificeerde Flipnote open stond. Voer je DS Connection Settings opnieuw in en zorg ervoor dat je niet per ongelijk het touchscreen gebruikt.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Green screen after pasting</u></summary>

Het bestand `boot.nds` ontbreekt of is misplaatst. Download de nieuwste versie van [b9stool](https://github.com/zoogie/b9sTool/releases/latest) en plaats `boot.nds` op de hoofdmap van je SD-kaart, ter vervanging van het bestaande bestand.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>White screen after pasting</u></summary>
Er is een probleem met je `boot.nds` bestand. Download de nieuwste versie van [b9stool](https://github.com/zoogie/b9sTool/releases/latest) opnieuw en plaats `boot.nds` op de hoofdmap van je SD-kaart, ter vervanging van het bestaande bestand.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Unable to open Luma3DS configuration menu after running B9STool</u></summary>

Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and explain what has happened.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

## Installing boot9strap (PicHaxx)

{% capture compat %}
<summary><u>"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)</u></summary>

Your `00000001.sav` and/or `otherapp.bin` files may be misplaced. Ensure that `00000001.sav` is in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data` and that `otherapp.bin` is on the root of your SD card.

If your files are in the correct locations, re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx), then place it in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`. Ensure that the file is named exactly `00000001.sav` and that you used your console's `movable.sed` to create it. Re-download [HBL otherapps](https://github.com/zoogie/ninjhax2.x/releases/download/v11.17/otherapps_with_CfgS_11.17.zip), place the `.bin` file relevant to your console to the root of your SD card, and rename it to `otherapp.bin`. Voeg de `.bin` extensie niet toe als je het nog niet ziet.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>"An exception occurred" or Errdisp when opening Picross</u></summary>

Your console already has custom firmware. Je zou best [controleren op CFW](checking-for-cfw).
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>"An error has occurred, forcing the software to close..." (white message box)</u></summary>

There is an issue with your `otherapp.bin` file. Download [HBL otherapps](https://github.com/zoogie/ninjhax2.x/releases/download/v11.17/otherapps_with_CfgS_11.17.zip), place the `.bin` file relevant to your console to the root of your SD card, and rename it to `otherapp.bin`. Voeg de `.bin` extensie niet toe als je het nog niet ziet.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Game starts normally</u></summary>

Your modified `00000001.sav` file may be misplaced, or you may have used the wrong `movable.sed` when creating it. Re-generate your `movable.sed` from [Bruteforce Movable](https://seedminer.hacks.guide), then re-create the save using the [PicHaxx Save Tool](https://3dstools.nhnarwhal.com/#/pichaxx) and place the resulting file (`00000001.sav`) in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

## Boot9strap installeren (Soundhax)

{% capture compat %}
<summary><u>Red/purple/pink and white screen after running Soundhax</u></summary>

If your console is on system version 9.4.0, 9.5.0, or 9.6.0, you may be encountering a bug with an old version of universal-otherapp. Download the latest version from [here](https://github.com/TuxSH/universal-otherapp/releases/latest).

If your console is not on those firmwares, it likely indicates that you already have custom firmware. Je zou best [controleren op CFW](checking-for-cfw).
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>"An error has occurred, forcing the software to close..." (white message box)</u></summary>

Er is een probleem met je `otherapp.bin` bestand (het ontbreekt, werd misplaatst of is corrupted). Download de nieuwste versie van [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) en plaats het op de hoofdmap van je SD-kaart.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>"Could not play"</u></summary>

You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Sluit je aan bij [Nintendo Homebrew op Discord](https://discord.gg/MWxPgEp) voor hulp.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Failed to mount the SD card!</u></summary>
Maak een back-up van je data en herformatteer je SD-kaart als FAT32 met het aanbevolen hulpmiddel afhankelijk van je besturingssysteem: ([Windows](formatting-sd-(windows)), [macOS](formatting-sd-(mac)) of [Linux](formatting-sd-(linux))). MiniTool Partition Wizard en het formatteer programma van HP (HPUSBDisk) zijn ervoor bekend om problemen te veroorzaken met 3DS SD-kaarten.

Mocht dit niet lukken, gebruik dan een andere SD-kaart.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

## Installing boot9strap (SSLoth-Browser)

{% capture compat %}
<summary><u>Red/purple/pink and white screen after running Browserhax</u></summary>

Dit geeft waarschijnlijk aan dat je al custom firmware hebt. Je zou best [controleren op CFW](checking-for-cfw).
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)</u></summary>

The file `arm11code.bin` is missing or misplaced. Download de nieuwste versie van [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), plaats `otherapp.bin` op de hoofdmap van je SD-kaart en hernoem het naar `arm11code.bin`. Voeg de `.bin` extensie niet toe als je het nog niet ziet.
{% endcapture %}
<details>{{ compat | markdownify }}</details>


{% capture compat %}
<summary><u>"An error has occurred, forcing the software to close..." (white message box)</u></summary>

There may be an issue with your `arm11code.bin` file. Download de nieuwste versie van [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), plaats `otherapp.bin` op de hoofdmap van je SD-kaart en hernoem het naar `arm11code.bin`. Voeg de `.bin` extensie niet toe als je het nog niet ziet.

You can also try resetting your browser save data:

1. Launch the browser, then launch the browser settings
1. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initialize Save Data" or "Clear All Save Data")
1. Try the exploit again

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Opening the browserhax QR code or URL crashes</u></summary>

Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.

1. Launch the browser, then launch the browser settings
1. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initialize Save Data" or "Clear All Save Data")
1. Try the exploit again
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>System Update prompt when opening browser</u></summary>

The SSLoth proxy was incorrectly configured. Re-do the SSLoth section on the page.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error 032-0420 when opening browser</u></summary>

Follow these steps in order:

1. Launch System Settings on your console
1. Navigate to `Internet Settings` -> `Connection Settings`
1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
1. Set "Proxy Settings" to "No"
1. Click OK, then click Save
1. When prompted, click "Test" to perform the connection test
    + The test should succeed
1. Click "OK" to continue
1. Press "Back" twice, then "Close" to go back to the HOME Menu
1. Open the Internet Browser once
1. If prompted about a system update, press OK
    + This won't actually update the system
1. Start again from [Section II](installing-boot9strap-(ssloth-browser).html#section-ii---ssloth)
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Frozen on "Doing agbhax..."</u></summary>
There may be an issue with your `arm11code.bin` file. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), place it on the root of your SD card, and rename it to `arm11code.bin`. Voeg de `.bin` extensie niet toe als je het nog niet ziet.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>"PrepareArm9ForTwl returned error c8804631!"</u></summary>

Sluit je aan bij [Nintendo Homebrew op Discord](https://discord.gg/MWxPgEp) voor hulp.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Failed to mount the SD card!</u></summary>

Maak een back-up van je data en herformatteer je SD-kaart als FAT32 met het aanbevolen hulpmiddel afhankelijk van je besturingssysteem: ([Windows](formatting-sd-(windows)), [macOS](formatting-sd-(mac)) of [Linux](formatting-sd-(linux))). MiniTool Partition Wizard en het formatteer programma van HP (HPUSBDisk) zijn ervoor bekend om problemen te veroorzaken met 3DS SD-kaarten.

Mocht dit niet lukken, gebruik dan een andere SD-kaart.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

## Installing boot9strap (super-skaterhax)

{% capture compat %}
<summary><u>"An error has occurred. Please save your data in any software currently in use, then restart the system."</u></summary>

The date is set incorrectly. To set it correctly, follow these steps:

1. Select the System Settings icon on the HOME Menu, and tap Open.
1. Tap Other Settings.
1. Tap Date & Time.
1. Tap Today's date.
1. Tap Up/Down Arrows to set the correct Day, Month and Year.
1. Select OK to confirm.

If the problem persists:

+ Ensure that `arm11code.bin`, `browserhax_hblauncher_ropbin_payload.bin`, and `boot.3dsx` are on the root of the SD card (not inside of any folder)
+ Ensure that you selected the correct payload for your region AND system version
+ Ensure that your region settings look [like this](/images/screenshots/skater_lang.png)
+ Try resetting your browser data:
    1. Launch the browser, then launch the browser settings
    1. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initilize Save Data" or "Clear All Save Data")
    1. Try the exploit again
+ Try changing the system language to something other than the current language

{% endcapture %}
<details>{{ compat | markdownify }}</details>


{% capture compat %}
<summary><u>"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)</u></summary>

The file `arm11code.bin` is missing or misplaced. Make sure to copy the files of the [latest version of super-skaterhax](https://github.com/zoogie/super-skaterhax/releases/latest) for your region and version to the root of your SD card (not inside of a folder).

![]({{ "/images/screenshots/skater-root-layout.png" | absolute_url }})
{: .notice--info}

{% endcapture %}
<details>{{ compat | markdownify }}</details>


{% capture compat %}
<summary><u>An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!</u></summary>

Dit geeft waarschijnlijk aan dat je al custom firmware hebt. Je zou best [controleren op CFW](checking-for-cfw).

{% endcapture %}
<details>{{ compat | markdownify }}</details>

## Installing boot9strap (MSET9)

{% capture compat %}
<summary><u>Python 3 is not installed</u></summary>

Python is not installed on the computer you are using. Download it from the [Python website](https://www.python.org/downloads/), double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error 01: Couldn't find Nintendo 3DS folder</u></summary>

You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.

Remember, your SD card should look like this:

![MSET9 root layout](/images/screenshots/mset9/mset9-root-layout.png)
{: .notice--info}

If your SD card layout is correct, then your SD card most likely isn't being read by your console. Re-format it ([Windows](formatting-sd-(windows)), [Linux](formatting-sd-(linux))), then start again from the beginning of [Section I](installing-boot9strap-(mset9)#section-i---prep-work).

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error 02: Your SD is write protected</u></summary>

Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the [upright position](/images/sdlock.png). Otherwise, try ejecting and reinserting your SD card.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error 03: Don't change console version</u></summary>

You inputted a different number between different runs of MSET9 (for example, you initially selected option 1 for "Old 3DS, 11.8 - 11.17" and then later selected option 2 for "New 3DS, 11.8 - 11.17").

If this happened when trying to uninstall MSET9, the script has automatically removed MSET9 for you and you can continue to the next page. Otherwise, start again from the beginning of [Section I](installing-boot9strap-(mset9)#section-i---prep-work).

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error 05: No Mii Maker Data!</u></summary>

Mii Maker data was not found on the SD card. Start again from the beginning of [Section I](installing-boot9strap-(mset9)#section-i---prep-work).

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error 06: You need at least 16MB free</u></summary>

Your SD card does not have enough space to trigger MSET9. Free up some space and try again.

At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it's best to free up at least that much.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error 07: You don't have 1 ID0, you have (#)!</u></summary>

You have multiple ID0 folders. To determine the correct folder, follow these instructions:

1. Hernoem de `Nintendo 3DS` map naar `BACKUP_Nintendo 3DS`
1. Stop je SD-kaart terug in je console
1. Zet je console aan
1. Wait for the console to generate the SD card data
    + Je applicaties zullen verdwenen zijn. Dit is normaal en wordt binnenkort opgelost
1. Zet je console uit
1. Plaats je SD kaart in je computer
1. Ga naar de `Nintendo 3DS` map op je SD-kaart
1. Write down the first few characters of the folder you see
    + This is your true ID0, which we will keep in the real Nintendo 3DS folder
1. Delete the ID0 from the current `Nintendo 3DS` folder
1. Move the true ID0 folder from the `BACKUP_Nintendo 3DS` folder to the `Nintendo 3DS` folder
1. If it exists, move the `Private` folder from the `BACKUP_Nintendo 3DS` folder to the `Nintendo 3DS` folder

Once you've done this, continue from [Section I Step 7](installing-boot9strap-(mset9)#section-i---prep-work).

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error 08: One or more files are missing or malformed!</u></summary>

One or more files that MSET9 needs to run is missing or corrupted. Re-download the [MSET9 Release `.zip`](https://github.com/zoogie/MSET9/releases/latest) and extract it to the root of your SD card, replacing all existing files, then try again.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error 10: Database(s) malformed or missing!</u></summary>

This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.

1. If you haven't already, press Enter to close the MSET9 script
1. Insert the SD card into your console
1. Zet je console aan
1. Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset ([visual instructions](/images/screenshots/database-reset.jpg))
1. Zet je console uit
1. Insert the SD card into your computer
1. Return to [Section I Step 7](installing-boot9strap-(mset9)#section-i---prep-work)

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error 12: You don't have 1 ID1, you have (#)!</u></summary>

{% include_relative include/id1-check.txt %}

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Red screen after reinserting SD card (Section II Step 11)</u></summary>

You may be missing `SafeB9S.bin` from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 `.zip`, replacing any existing files.

Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: [Windows](formatting-sd-(windows)), [Linux](formatting-sd-(linux)) *(this will wipe your SD card data)*

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>System Settings loading infinitely after reinserting the SD card</u></summary>

You most likely did something different from the MSET9 instructions, or selected the wrong model or version.

1. Close the script window
1. Execute the `mset9.py` script on the root of the SD card
    + **Windows**: Double-click `mset9.bat`
    + **Linux**: open a Terminal window, `cd` to the root of your SD card, then type `python3 mset9.py` and press Enter
    + You should see a window that says "MSET9 ... SETUP by zoogie"
1. Type the number corresponding to your console model and version, then press Enter
1. Type `3`, then press Enter
1. Once the window says "Successfully removed MSET9!", reinsert the SD card into your console
1. Zet je console aan
1. Return to [Section II Step 1](installing-boot9strap-(mset9)#section-ii---mset9)

If you continue to have this issue and are sure that you did everything correctly, it's possible that there's something wrong with your Mii Maker extdata. Follow these instructions to reset it:

1. Close the script window
1. Run the MSET9 script
    + **Windows**: Double-click `mset9.bat`
    + **Linux**: open a Terminal window, `cd` to the root of your SD card, then type `python3 mset9.py` and press Enter
    + You should see a window that says "MSET9 ... SETUP by zoogie"
1. Type the number corresponding to your console model and version, then press Enter
1. Type `3`, then press Enter to remove MSET9
1. If possible, use a new SD card; otherwise, backup and reformat your existing SD card as FAT32 ([Windows](formatting-sd-(windows)), [Linux](formatting-sd-(linux)))
1. Insert the formatted, blank SD card into your console
1. Return to [Section I Step 1](installing-boot9strap-(mset9)#section-i---prep-work)

After finishing the MSET9 page, you should switch back to your old SD card before continuing to Finalizing Setup.
{: .notice--warning}

{% endcapture %}
<details>{{ compat | markdownify }}</details>

## Installatie voltooien

{% capture compat %}
<summary><u>Unable to update console</u></summary>

De volgende stappen kunnen in elke volgorde uitgevoerd worden, maar zijn gesorteerd volgens de moeilijkheidsgraad om ze uit te voeren.

1. Stel uw DNS instellingen in op "Auto"
1. Verplaats je dichter bij je wifi-router
1. Update vanuit Safe Mode door je console uit te schakelen, (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A) ingedrukt te houden tijdens het opstarten en de instructies te volgen op het scherm
1. Verwijder je wifi connectie, verbind daarne opnieuw met je wifi
1. Herstart je wifi-router
1. Maak verbinding met een andere wifi-verbinding, zoals een mobiele hotspot
1. Nintendo servers kunnen offline zijn; Probeer het later opnieuw
1. Als je nog steeds een foutmelding krijgt, [volg dan CTRTransfer](ctrtransfer) en probeer het opnieuw
1. Voor verdere ondersteuning (in het Engels), join dan [Nintendo Homebrew op Discord](https://discord.gg/MWxPgEp)
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error #02: Missing essential.exefs</u></summary>

You said 'No' to the "Make essential files backup?" prompt in GodMode9. Power off your console, power it on while holding (Start) to re-enter GodMode9, say 'Yes' to the prompt, then try again.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}

<summary><u>Unable to open GodMode9 or Error #03: Missing files</u></summary>

You did not copy everything from `finalize.zip` to the root of your SD card. Remember, your SD card should have at least these files:

![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
{: .notice--info}

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}

<summary><u>Error #04: No space</u></summary>

You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. If you don't have enough space, follow these steps:

1. Zet je console uit
1. Plaats je SD kaart in je computer
1. Copy the `Nintendo 3DS` folder from the root of your SD card to your computer
1. Delete the Nintendo 3DS folder from the SD card
1. Stop je SD-kaart terug in je console
1. Houd (Start) ingedrukt en terwijl je (Start) ingedrukt houdt, zet je je console aan. Dit zal GodMode9 starten
1. Press the (Home) button
1. Selecteer "Scripts..."
1. Select "finalize"
1. Press (A) to create a NAND backup
    + This may take around fifteen minutes
1. Press (A) again
    + The console should automatically power off
1. Plaats je SD kaart in je computer
1. Copy the files in `/gm9/backups/` on your SD to a safe location on your computer
1. Delete the `<date>_<serialnumber>_sysnand_##.bin` and `<date>_<serialnumber>_sysnand_##.bin.sha` files from the SD card
1. Copy the `Nintendo 3DS` folder from your computer to the root of your SD card
1. Delete the `Nintendo 3DS` folder from your computer

Now that you have your NAND backup in a safe place:

1. Stop je SD-kaart terug in je console
1. Houd (Start) ingedrukt en terwijl je (Start) ingedrukt houdt, zet je je console aan. Dit zal GodMode9 starten
1. Press the (Home) button
1. Selecteer "Scripts..."
1. Select "finalize"
1. Continue the script as normal
    + The NAND backup will be automatically skipped

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Information #05: No title database</u></summary>

Press (A) to import a title database, unlock SysNAND writing by entering the buttons on-screen, then continue the script as normal.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error #06 or "Error: Could not open directory" when attempting a NAND backup</u></summary>

Make sure you have at least 1.3GB available in your SD card. If you don't have enough space, follow these steps:
1. Zet je console uit
1. Plaats je SD kaart in je computer
1. Copy the `Nintendo 3DS` folder from the root of your SD card to your computer
1. Delete the Nintendo 3DS folder from the SD card
1. Stop je SD-kaart terug in je console
1. Houd (Start) ingedrukt en terwijl je (Start) ingedrukt houdt, zet je je console aan. Dit zal GodMode9 starten
1. Perform a [NAND Backup](godmode9-usage#creating-a-nand-backup)
1. Copy the files in `gm9/out` on your SD to a safe location on your computer
1. Delete the `<date>_<serialnumber>_sysnand_##.bin` and `<date>_<serialnumber>_sysnand_##.bin.sha` files from the SD card, keeping essential.exefs in `/gm9/out/`
1. Copy the `Nintendo 3DS` folder from your computer to the root of your SD card
1. Delete the `Nintendo 3DS` folder from your computer

If you have enough space on your SD card, your SD might be corrupted or faulty. Check your SD card for any errors by following the guide according to your computer's operating system: [Windows](h2testw-(windows)), [Linux](f3-(linux)), [macOS](f3xswift-(mac)).
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error #09: Unsupported GodMode9 version</u></summary>

You are somehow running a version of GodMode9 not packaged with the script. Make sure you copied the contents of `finalize.zip` to the root of your SD card and that you are holding START while powering on your console.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error #11: Missing donor database</u></summary>

You did not copy everything from `finalize.zip` to the root of your SD card. Remember, your SD card should have at least these files:

![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
{: .notice--info}

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error #12: Copy (file).db fail</u></summary>

Ensure that your SD card is not [locked](/images/sdlock.png). If the SD card is not locked and you continue to get this error, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Information #17: Duplicate NAND backup</u></summary>

The script has detected that the Nintendo 3DS folder is missing AND that you have already made a NAND backup before. If you intend to install homebrew applications, you should do the following:

1. Press (B) to cancel making another NAND backup
1. Hold (R) and press (Start) at the same time to power off your console
1. Copy the contents of `/gm9/backups/` to a safe location on your computer
1. Delete `/gm9/backups/` from your SD card
1. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card
    + If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it
1. Houd (Start) ingedrukt en terwijl je (Start) ingedrukt houdt, zet je je console aan. Dit zal GodMode9 starten
1. Druk op de (Home) knop om het actiemenu te openen
1. Selecteer "Scripts..."
1. Select "finalize"
1. Follow the prompts in the script, answering any questions that you are asked 

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Error #18: MSET9 detected</u></summary>

You didn't remove MSET9 when prompted to. Follow [Section IV - Removing MSET9](installing-boot9strap-(mset9)#section-iv---removing-mset9), then re-run the script.

{% endcapture %}
<details>{{ compat | markdownify }}</details>

---

## Boot issues on consoles with custom firmware

The steps detailed here generally assume that your console has a modern custom firmware setup (boot9strap + Luma3DS 8.0 or greater). Als je console een oudere homebrew setup heeft (bijvoorbeeld iets gebaseerd op arm9loaderhax of menuhax), dan moet je updaten voor je deze instructies probeert.
{: .notice--info}

### Power/notification light indicators

{% capture compat %}
<summary><u>My console powers off when I try to turn it on, and/or the notification LED shows a color on boot</u></summary>

Er is een probleem met je `boot.firm` bestand. Als je [boot9strap 1.4](https://github.com/SciresM/boot9strap/releases/tag/1.4) gebruikt, kan je 3DS notificatie LED een bepaalde kleur flashen. Deze kleur wordt gebruikt om problemen met je `boot.firm` bestand op SD-kaart of intern geheugen te diagnosticeren. On older versions of boot9strap, the blue light will power off almost immediately when trying to turn on the console.

Als de notificatie LED knippert:

+ **White**: Your 3DS was not able to find `boot.firm` on your SD card or on internal memory.
+ **Magenta**: Your 3DS was not able to find `boot.firm` on your SD card. Het kon `boot.firm` vinden in het interne geheugen, maar het bestand is beschadigd.
+ **Red**: Your 3DS was able to find `boot.firm` on both your SD card and on internal memory, but both files are corrupted.

Je kunt een nieuw `boot.firm` bestand krijgen door de [nieuwste versie van Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) te downloaden, het uitpakken en `boot.firm` plaatsen op de hoofdmap van je SD-kaart. Indien je `boot.firm` bestand consequent gedetecteerd wordt als beschadigd, controleer je best je SD-kaart op fouten ([Windows](h2testw-(windows)), [Linux](f3-(linux)), of [macOS](f3xswift-(mac))). Houd er ook rekening mee dat de 3DS problemen heeft met bestanden die zijn uitgepakt met WinRAR.

If you hear a "popping sound", potentially accompanied with the backlight turning on for a split second, there is a hardware issue with your console (such as a disconnected backlight cable). You may be able to get your console to boot by holding it at certain angles.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>My console gets stuck on a black screen with blue power light staying on</u></summary>

De volgende stappen kunnen in elke volgorde uitgevoerd worden, maar zijn gesorteerd volgens de tijdsduur om ze uit te voeren.

1. Power off your console, remove the SD card, re-insert it, then power on your console.
1. Power off your console, eject the game cartridge if inserted, power on your console, then wait up to ten minutes. If your console boots within ten minutes, the issue has been fixed and is unlikely to reoccur
1. Hernoem de `Nintendo 3DS` map op je SD-kaart naar `Nintendo 3DS_BACKUP` en probeer dan je 3DS op te starten. If your console successfully boots, there is some issue within your `Nintendo 3DS` folder. Probeer HOME-menu extdata te wissen:
    + Navigeer naar `/Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/`
    + Verwijder de overeenkomende map voor je 3DS regio:
        + **EUR Regio**: `00000098`
        + **JPN Regio**: `00000082`
        + **USA Regio**: `0000008f`
        + **CHN Regio**: `000000A1`
        + **KOR Regio**: `000000A9`
        + **TWN Regio**: `000000B1`
1. Probeer in herstelmodus op te starten en je systeem up te daten:
    + Zet je console uit
    + Hou de volgende knoppen vast: (Left Shoulder) + (Right Shoulder) + (D-Pad omhoog) + (A)
    + Zet je console aan
    + If you were successful, the console will boot to an "update your system" screen
1. Volg de [CTRTransfer](ctrtransfer) handleiding
1. Voor verdere ondersteuning vraag om hulp in de [Nintendo Homebrew Discord](https://discord.gg/MWxPgEp)
{% endcapture %}
<details>{{ compat | markdownify }}</details>

### Error message on boot

{% capture compat %}
<summary><u>"An error has occurred: Failed to apply 1 FIRM patch(es)" or "An exception has occurred -- Current process: pm"</u></summary>

Je Luma3DS versie is verouderd. Download de nieuwste versie van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) en plaats `boot.firm` op de hoofdmap van je SD-kaart, ter vervanging van het bestaande bestand. Zorg ervoor dat je het ZIP-bestand uitpakt met een andere tool dan WinRAR, omdat het bekend is dat het problemen veroorzaakt met 3DS-gerelateerde bestanden.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>"Unable to mount CTRNAND or load the CTRNAND FIRM. Please use an external one."</u></summary>
There are a number of reasons as to why this could be happening. In any case, this error can usually be fixed by following the [CTRTransfer](ctrtransfer) guide.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>"An error has occurred. Hold down the POWER button to turn off the power..."</u></summary>

ARM11 exception handlers zijn uitgeschakeld of custom firmware is niet geïnstalleerd. Probeer ARM11 exception handlers in te schakelen:
    + Zet je console uit
    + Hou (Select) vast
    + Power on your console, while still holding (Select)
    + Als "Disable ARM11 exception handlers" is aangevinkt, vink het uit
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>HOME Menu is missing installed applications</u></summary>

This could be caused by various reasons, but most likely because your SD card is not being read by the system.
You can check if your SD is being read by holding SELECT on boot and checking the yellow text on the bottom screen; if it says "Booted from CTRNAND via B9S", then your console is booting from the internal memory and not from the SD card.
If this is the case, attempt the steps below, which are listed from easiest to hardest:
1. Power off your console, remove the SD card, re-insert it, then power on your console
1. Power off your console, remove the SD card, insert it on your computer, download the latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest), extract `boot.firm` from the `Luma3DS.zip` and place it on the root of your SD card (replacing any existing file)
1. Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer's operating system: [Windows](formatting-sd-(windows)), [macOS](formatting-sd-(mac)), [Linux](formatting-sd-(linux)) *(this will wipe your SD card data)*
1. Test your SD card for errors by following the guide according to your computer's operating system: [Windows](h2testw-(windows)), [Linux](f3-(linux)), [macOS](f3xswift-(mac)). If your SD card is marked as faulty, then you will have to replace your SD card
1. Your SD card slot may be broken. Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for further assistance
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Blue "BOOTROM ERROR" screen</u></summary>

Your console is likely hard-bricked. You will need to buy an ntrboot flashcart to reinstall boot9strap in order to attempt to fix your console. Dit kan ook duiden op een hardware probleem dat niet kan worden opgelost. In ieder geval, join [Nintendo Homebrew op Discord](https://discord.gg/MWxPgEp) voor hulp.
    + Het is ook mogelijk dat iemand een boot-time splash screen heeft ingesteld dat eruit ziet als een brick. Try leaving your console powered on, waiting on the blue screen, for five minutes.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Some other error</u></summary>

Neem een foto van de fout en meld je aan bij [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) voor hulp.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

## Software issues on consoles with custom firmware

{% capture compat %}
<summary><u>DSi / DS functionality is broken or has been replaced with Flipnote Studio</u></summary>

1. Download de nieuwste versie van [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) (het `.3dsx` bestand)
1. Zet je console uit
1. Maak een map genaamd "3ds" op de hoofdmap van je SD-kaart als die nog niet bestaat
1. Kopieer `TWLFix-CFW.3dsx` naar de `/3ds/` map op je SD kaart
1. Stop je SD-kaart terug in je console
1. Start de Homebrew Launcher op
1. Start TWLFix-CFW op uit de lijst met homebrew
1. Klik op (A) om de kapotte TWL titels te verwijderen
1. Press (Start) to reboot the console
1. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    + De update zal zien dat de essenciële TWL titels zijn gedeïstalleerd en zal ze opnieuw installeren
1. Once the update is complete, tap "OK" to reboot the console
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>GBA Virtual Console and/or Safe Mode functionality is broken</u></summary>

Your console is running Luma3DS 6.6 or older, likely via arm9loaderhax. You should follow [A9LH to B9S](a9lh-to-b9s) to update your console to a modern custom firmware environment.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Extended memory mode games (Pokemon Sun/Moon, Smash, etc.) don't work</u></summary>

Dit kan gebeuren na een CTRTransfer of regio verandering op Old 3DS / 2DS. You will need to system format your console to fix this issue.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Exception screen when booting/loading an application</u></summary>

Look for your exception screen in [this page](https://wiki.hacks.guide/wiki/3DS:Error_screens/Luma3DS_exception_screen).
If you weren't able to find your error or the instructions didn't work, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for further assistance.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher</u></summary>

Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of [menuhax67](https://github.com/zoogie/menuhax67/releases/latest) (the menuhax `.zip`), then follow the ["Uninstall menuhax67" section](https://wiki.hacks.guide/wiki/3DS:Alternate_Exploits/menuhax67#Uninstall_menuhax67) here.
{% endcapture %}
<details>{{ compat | markdownify }}</details>

---

## Andere problemen oplossen

{% capture compat %}
<summary><u>Clear HOME Menu extdata</u></summary>

1. Zet je console uit
1. Plaats je SD kaart in je computer
1. Navigeer naar de `/Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/` map op je SD-kaart
1. Verwijder de overeenkomende map voor je 3DS regio:
    + **EUR Regio**: `00000098`
    + **JPN Regio**: `00000082`
    + **USA Regio**: `0000008f`
    + **CHN Regio**: `000000A1`
    + **KOR Regio**: `000000A9`
    + **TWN Regio**: `000000B1`
1. Stop je SD-kaart terug in je console
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Clear HOME Menu theme data</u></summary>

1. Zet je console uit
1. Plaats je SD kaart in je computer
1. Navigeer naar de `/Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/` map op je SD-kaart
1. Verwijder de overeenkomende map voor je 3DS regio:
    + **EUR Regio**: `000002ce`
    + **JPN Regio**: `000002cc`
    + **USA Regio**: `000002cd`
1. Stop je SD-kaart terug in je console
{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Manually entering Homebrew Launcher</u></summary>

If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need [boot.3dsx and boot.firm](https://github.com/LumaTeam/Luma3DS/releases/latest) on the root of your SD card.)

{% include_relative include/launch-hbl-dlp.txt %}

{% endcapture %}
<details>{{ compat | markdownify }}</details>

{% capture compat %}
<summary><u>Turning off Parental Controls</u></summary>

You can disable the Parental Controls feature by going to System Settings -> Parental Controls and inserting the PIN, then pressing "Clear Settings", then "Delete" to remove it.
However, if you do not know the PIN and therefore cannot access the console's settings, you will need to disable it. In order to do this, you need to obtain your console's master key (mkey):
1. Go to [this website](https://mkey.eiphax.tech/)
1. Fill the following boxes with the information:
    + Device Type: Select "3DS" (the same applies if you are using a 2DS, New 3DS (XL/LL) or New 2DS (XL/LL))
    + System Date: The day and month your console's clock is set to
    + Inquiry Number: Can be obtained by pressing "Forgot PIN" then "I Forgot" in the Parental Controls screen
1. After you have obtained your mkey, press OK on the screen you have obtained your Inquiry Number, then input the master key
1. Press "Clear Settings", then "Delete" to remove all Parental Controls data
{% endcapture %}
<details>{{ compat | markdownify }}</details>