---
title: "Installing boot9strap (USM)"
---

{% include toc title="Cuprins" %}

### Lectură obligatorie

In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.

We can do this using an existing exploit, BannerBomb3.

To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list.

Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.

Aceste instrucțiuni funcționează pe consolele din regiunea SUA, Europa, Japonia și Coreea, indicate de literele U, E, J, sau K după versiunea de sistem.

If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}

### Ce aveți nevoie

* Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)

#### Secțiunea I - Preparații

1. If your device is powered on, power off your device
1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer
1. Încărcați fișierul movable.sed folosind opțiunea "Choose File"
1. Click "Download unSAFE_MODE-bb3 archive"
  + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`)
1. Introduceți cardul SD în calculator
1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD
  + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card
1. Navigați spre `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` pe cardul SD
  + The `<ID0>` will be the same one that you used in [Seedminer](seedminer)
  + The `<ID1>` is a 32 character long folder inside of the `<ID0>`
  + If `Nintendo DSiWare` does not exist, create it inside of the `<ID1>`
1. Dacă există orice fișier de copie de rezervă DSiWare (`<8-character-id>.bin`) în acest folder, mutați-l în calculator
  + Acesta vă va lăsa cu un folder gol de Nintendo DSiWare. Moving the files to your PC ensures you don't delete any intentional backups
1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder

#### Section II - BannerBomb3

1. Reintroduceți cardul SD în dispozitivul dumneavoastră
1. Porniți dispozitivul
1. Porniți System Settings pe consolă
1. Navigați spre `Data Management` -> `DSiWare`
1. Faceți click pe secțiunea SD Card
  + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied
  + If the bottom screen does not flash Red, the exploit profile was not copied and you will not be able to complete the next section. Ensure that your files are properly placed, then try again
1. Închideți dispozitivul

#### Section III - unSAFE_MODE

1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
  + Keep holding the buttons until the device boots into Safe Mode
1. Press "OK" to accept the update
  + There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
  + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration

#### Secțiunea IV - Configurând Luma3DS

1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS
  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele:
  + **"Show NAND or user string in System Settings"**
1. Apăsați (Start) pentru a salva și reporni

At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
  + Luma3DS does not look any different from the normal HOME menu. If your console has booted into the HOME menu, it is running custom firmware.
  + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.

#### Section V - Restoring WiFi Configuration Profiles

1. Porniți System Settings pe consolă
1. Navigați spre `Data Management` -> `DSiWare`
1. Faceți click pe secțiunea SD Card
  + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored
1. Închideți dispozitivul
1. Introduceți cardul SD în calculator
1. Navigați spre `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` pe cardul SD
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder

___

### Continuați la [Finalizând instalarea](finalizing-setup)
{: .notice--primary}