Boot9strap installeren (kartdlphax)

---

Voor hulp in het Engels kan je terecht bij Nintendo Homebrew op Discord.

Vind je dit een goede handleiding? We accepteren donaties.

---

Technical Details (optional)

In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.

To accomplish this, we can use the Download Play functionality of the game Mario Kart 7, using a 3DS with custom firmware already installed along with a custom game plugin.

This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.

Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.

For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.

Compatibility Notes

Om deze instructies te volgen, heb je het volgende nodig:

• Een tweede 3DS met custom firmware (de bron 3DS) die dezelfde regio is als de 3DS die je probeert te veranderen (de doel 3DS)
  • The consoles must be USA, JPN, or EUR region consoles
  • The source 3DS can be region changed to match the target 3DS if necessary
• Een fysieke of digitale kopie van Mario Kart 7 dat dezelfde regio heeft als beide consoles
• An SD card for both consoles

Wat je nodig hebt

• The latest release of kartdlphax (plugin.3gx)
• De nieuwste versie van SafeB9SInstaller (directe download)
• De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
• The latest release of unSAFE_MODE (the RELEASE .zip file)

Section I - Hardware Button Check (target 3DS)

In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.

1. Zet je console aan
2. Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
   • The camera applet should appear
3. Zet je console uit

If the camera does not open, you cannot follow this method. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.

Section II - Prep Work (source 3DS)

In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.

1. Plaats de SD-kaart van je bron 3DS in je computer
2. Copy boot.firm from the Luma3DS .zip to the root of the source 3DS’s SD card, replacing any existing file
   • De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
3. Kopieer kartdlphax’s plugin.3gx naar de volgende map op de bron 3DS’s SD-kaart, afhankelijk van de regio van je kopie van Mario Kart 7:
   • USA: luma/plugins/0004000000030800
   • EUR: luma/plugins/0004000000030700
   • JPN: luma/plugins/0004000000030600
   • Maak de plugins en 00040000... mappen aan als ze nog niet bestaan
4. Haal de SD-kaart uit en stop deze in de bron 3DS

Section III - Prep Work (target 3DS)

In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.

1. Plaats de SD-kaart van je doel 3DS in je computer
2. Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of the target 3DS’s SD card
3. Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
4. Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
5. Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
6. Copy usm.bin from the RELEASE .zip to the root of your SD card
7. Create a folder called 3ds on the root of your SD card
8. Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
9. Haal de SD-kaart uit en stop deze in de doel 3DS

Section IV - kartdlphax

In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.

1. Zet de bron 3DS aan
   • Als je gevraagd wordt om Luma3DS in te stellen, druk gewoon op START om de configuratie op te slaan
2. Eenmaal in het HOME-menu, druk op (Left Shoulder) + (Down D-Pad) + (Select) om het Rosalina menu te tonen
3. Selecteer “Enable plugin loader”
4. Druk op (B) om het Rosalina menu af te sluiten
5. Start Mario Kart 7
   • Zorg ervoor dat draadloze verbinding is ingeschakeld
6. Navigate to Local Multiplayer. A menu should pop up
   • If the screen freezes, hold the power button for fifteen seconds to force power off your console, then try again
   • If you have launched kartdlphax previously, the last selected settings will be loaded. If they are correct, select Use settings and skip the next 3 steps. If they are incorrect, select Change settings and proceed.
7. Select your target 3DS console type (Old 3DS family or New 3DS family)
8. Select the following exploit type depending on your system version:
   • 11.16.0: select xPloitInjector (11.16)
   • 11.17.0: select xPloitInjector (11.17)
9. A confirmation menu will show up. If the settings shown on the top screen are correct, select Use settings
   • If the settings are not correct, press Change settings and modify them accordingly
10. Select Create Group
    • Als de bron 3DS op dit moment bevriest en je een cartridge gebruikt, probeer dan het cartridge te installeren naar het systeem
11. Zet de doel 3DS aan
    • Zorg ervoor dat draadloze verbinding is ingeschakeld
12. Op de doel 3DS, open de Download Play applicatie (), selecteer dan “Nintendo 3DS”
13. Word lid van de groep gemaakt door de bron 3DS
14. Selecteer “Start” op de bron 3DS zodra de doel 3DS is gedetecteerd
15. Zodra multiplayer is geladen, navigeer naar Grand Prix -> 50cc -> (any driver) -> Mushroom Cup -> OK
16. Wacht een tijdje (een percentage moet worden weergegeven op de bron 3DS)
17. If the exploit was successful, the target 3DS will have booted into the 3DS ROP xPloit Injector
    • If the exploit was not successful, power off the source 3DS and target 3DS and start again from the beginning of Section III - kartdlphax
18. Press (X) to inject unSAFE_MODE
19. If the injection was successful, the screen will turn green and the target 3DS will automatically power off
    • If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)

You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.

Section V - unSAFE_MODE

In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.

1. With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
   • Keep holding the buttons until the console boots into Safe Mode (a “system update” menu)
2. Druk op “OK” om de update te accepteren
   • Er is geen update. Dit is deel van de exploit
3. Press “I accept” to accept the terms and conditions
4. The update will eventually fail, with the error code 003-1099. Dit is verwacht gedrag
5. When asked “Would you like to configure Internet settings?”, select “Yes”
6. On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
7. If the exploit was successful, your console will have booted into SafeB9SInstaller
   • If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
   • If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
   • If you get a different error, follow this troubleshooting guide

Section VI - Installing boot9strap

In this section, you will install custom firmware onto your console.

1. When prompted, input the key combo given on the top screen to install boot9strap
   • If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
2. Once it is complete, press (A) to reboot your console
3. Your console should have booted into the Luma3DS configuration menu
   • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
   • For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
   • If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
4. Druk op (Start) om op te slaan en opnieuw op te starten

At this point, your console will boot to Luma3DS by default.

• Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
• On the next page, you will install useful homebrew applications to complete your setup.

Section VII - Restoring WiFi Configuration Profiles

In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.

1. Start de Download Play applicatie ()
2. Wacht tot je de ‘Nintendo 3DS’ en ‘Nintendo DS’ knoppen ziet
3. Druk tegelijkertijd op (L) + (Down) + (Select) om het Rosalina menu te openen
4. Selecteer “Miscellaneous options”
5. Selecteer “Switch the hb. title to the current app.”
6. Druk op (B) om door te gaan
7. Druk op (B) om terug te gaan naar het Rosalina hoofdmenu
8. Druk op (B) om het Rosalina menu af te sluiten
9. Press (Home) to suspend Download Play
10. Press the “Close” button on the bottom screen to close Download Play
11. Re-launch the Download Play application
12. Your console should load the Homebrew Launcher
    • If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card
13. Launch slotTool from the list of homebrew
14. Select “RESTORE original wifi slots 1,2,3”
15. Your console will then reboot

---

Doorgaan naar Installatie voltooien