问题排查

如果有疑问并且懂英语的话，可以到 Nintendo Homebrew Discord 服务器上使用英文寻求帮助。（请注意，如果你身处中国大陆，你可能需要通过科学上网来访问 Discord） 你也可以到译者的 QQ 群寻求帮助，群号为 942052497。
如果你喜欢我们的教程，可以通过捐赠支持我们。

此页面列出了一些常见问题的解决办法。 如果你的问题无法通过此页面提供的方法解决，请加入 Nintendo Homebrew Discord 服务器，使用英文描述你的问题（包括你尝试过的操作）来寻求帮助。你也可以到译者的 QQ 群寻求帮助，群号为 942052497。

Table of Contents

Used on multiple pages:

Guide pages:

Issues after installation:

关于 SafeB9SInstaller 的问题

Before opening SafeB9SInstaller

Failed to open SafeB9SInstaller.bin

SafeB9SInstaller.bin 文件丢失或放置在了错误的位置。 下载最新版本的 SafeB9SInstaller 然后解压它，将 SafeB9SInstaller.bin 放在你 SD 卡的根目录中。 如果你下到的东西看不到 .bin 后缀，请不要重命名它。

SigHaxed FIRM was not installed! Check lower screen for more info.

MicroSD Card - init failed

Your SD card is most likely acting weird. Try reformatting your SD card (Windows, macOS, Linux). If this doesn’t work, try another SD card.

SigHaxed FIRM - File not found

你忘记把 boot9strap.firm 和 boot9strap.firm.sha 放进 SD 卡根目录的 boot9strap 文件夹了，或是创建 boot9strap 文件夹的时候打错了名字。 下载最新版本的 boot9strap，然后将 boot9strap.firm 和 boot9strap.firm.sha 放入 boot9strap 文件夹。

SigHaxed FIRM - invalid FIRM

你的 boot9strap.firm 和 boot9strap.firm.sha 文件有问题。 重新下载最新版本的 boot9strap，然后将 boot9strap.firm 和 boot9strap.firm.sha 放入 boot9strap 文件夹。

Secret Sector - File not found

你忘记把 secret_sector.bin 放进 SD 卡根目录的 boot9strap 文件夹了，或是创建 boot9strap 文件夹的时候打错了名字。 使用 BT 客户端下载 secret_sector.bin，然后把它放到 SD 卡里的 boot9strap 文件夹中。

Something else

如需帮助，请加入 Nintendo Homebrew Discord 服务器，使用英文描述你看到的信息。你也可以到译者的 QQ 群寻求帮助，群号为 942052497。

Seedminer

Multiple long folder names in Nintendo 3DS folder

This occurs when you use your SD card in multiple 3DS consoles and is intended to prevent inadvertently merging data that would not be valid on other consoles. 为了确定哪个文件夹是你 3DS 的，请按照以下步骤做：

  1. 将 Nintendo 3DS 文件夹重命名为 BACKUP_Nintendo 3DS
  2. Reinsert your SD card into your console
  3. Power on your console
  4. Wait for the console to generate the SD card data
    • 你先前安装的程序会暂时消失。 这是正常的，且接下来就会还原回来。
  5. 将主机关机
  6. 将你的 SD 卡插入到电脑
  7. 打开你 SD 卡的 Nintendo 3DS 文件夹
  8. 复制你看到的 32 位字符文件夹的名称
  9. 删除 Nintendo 3DS 文件夹
  10. 将 BACKUP_Nintendo 3DS 文件夹重命名为 Nintendo 3DS
Bruteforce Movable skips to step 4

这说明网站曾已经使用你的好友码和 ID0 获取到你的 movable.sed 了。 你可以直接使用它给的 movable.sed，不用过多担心。

Important! You have been locked out of the automated part1 dumper system...

你的好友码已被本服务锁定，因为你没有在服务的限定时间内将服务给的机器人好友码添加到好友列表，且尝试次数过多，浪费了机器人的感情。 确保你的 3DS 已经连上了网络，然后加入 Nintendo Homebrew Discord 服务器来要求解锁。

We were unable to successfully complete your bruteforce request. :`(

网站已经确定无法获取到你的 movable.sed。 确保先前你输入到网站的 ID0 是正确的。 If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.

If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). Otherwise, you will need to follow a method that requires additional games or hardware.

BannerBomb3

Multiple ID1 folders inside of ID0

This can occur if you’ve used multiple SD cards on a 3DS and then merged the contents of the SD cards together. This is done to prevent conflicting, valid data from being merged together.

To fix this, you will need to determine which folder contains your data. Usually, this will be the larger (or largest) of the folders. Backup and delete the smaller one(s), then create a Nintendo DSiWare folder in the one that remains and move F00D43D5.bin to that location.

DSiWare Management menu crashes without showing BB3 multihax menu

确保 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 里面只有 F00D43D5.bin 这一个文件。 If it is, then re-create it with the Bannerbomb3 Injector.

另外，请确保 bb3.bin 正确地放置在 SD 卡的根目录下。 If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.

If neither of these solutions fixes this problem, then custom firmware may have been uninstalled on this console in a way that makes this method impossible to perform. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.

DSiWare Management menu displays "No accessible software data."

F00D43D5.bin 没有放进 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare。 请确保 Nintendo DSiWare 拼写和空格位置正确。 不区分大小写。

DSiWare Management shows a question mark

你放的 F00D43D5.bin 文件可能有问题（损坏或被用于错误的 3DS）。 Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.

Installing boot9strap (Fredtool-Inject)

Error on DSiHaxInjector page

请确认 movable.sed 和 DSiWare 备份是从同一台主机导出的。 如果不匹配就会报错。

"Haxxxxxxxxx!" does not appear

你放的 42383821.bin 文件有问题（丢失、放错位置或者损坏）。 使用 DSIHaxInjector_new 重新创建文件，确保 42383821.bin 是从 output.zip -> hax 取出来的，且放在了 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 中。

DSiWare launches normally

Haxxxxxxxxx! 没有被从 SD 卡中复制到系统内部存储。

SD card is grayed out in Flipnote

如果你用的内存卡特别大的话，Flipnote 可能需要花很长时间来索引内存卡。 等它几分钟。

Lenny face does not appear in SD card section

你忘了从 Frogminer_save .zip 压缩包中复制 private 文件夹到内存卡的根目录了。

Flipnote freezes

你在操作过程中可能误触了其它的东西。 重新进入 DS 连接设置并重试。

Green screen after pasting

boot.nds 文件丢失或位置错误。 下载最新版本的 b9stool 并将 boot.nds 放在你 SD 卡的根目录中，如有存在相同文件请替换。

White screen after pasting

这说明你放的 boot.nds 文件有问题。 重新下载最新版本的 b9stool 并将 boot.nds 放在你 SD 卡的根目录中，如有存在相同文件请替换。

Unable to open Luma3DS configuration menu after running B9STool

Join Nintendo Homebrew on Discord and explain what has happened.

Installing boot9strap (PicHaxx)

"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.

If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果你下到的东西看不到 .bin 后缀，请不要重命名它。

"An exception occurred" or Errdisp when opening Picross

Your console already has custom firmware. 你应该检查一下。

"An error has occurred, forcing the software to close..." (white message box)

There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果你下到的东西看不到 .bin 后缀，请不要重命名它。

Game starts normally

Your modified 00000001.sav file may be misplaced, or you may have used the wrong movable.sed when creating it. Re-generate your movable.sed from Bruteforce Movable, then re-create the save using the PicHaxx Save Tool and place the resulting file (00000001.sav) in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.

安装 boot9strap（通过 Soundhax）

Red/purple/pink and white screen after running Soundhax

If your console is on system version 9.4.0, 9.5.0, or 9.6.0, you may be encountering a bug with an old version of universal-otherapp. Download the latest version from here.

If your console is not on those firmwares, it likely indicates that you already have custom firmware. 你应该检查一下。

"An error has occurred, forcing the software to close..." (white message box)

你放的 otherapp.bin 文件有问题（丢失、放错位置或者损坏）。 下载最新版本的 universal-otherapp 并将其放在你 SD 卡的根目录中。

"Could not play"

You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. 如需帮助，请加入 Nintendo Homebrew Discord 服务器。

Failed to mount the SD card!

备份好你 SD 卡上的文件，然后根据你的操作系统选择一个工具来重新格式化 SD 卡为 FAT32 格式：Windows、macOS、Linux。 目前已知 MiniTool Partition Wizard 和惠普格式化工具（HPUSBDisk）格出来的 SD 卡给 3DS 使用会出问题。

如果还是不行，尝试换一张 SD 卡。

安装 boot9strap（通过 SSLoth-Browser）

Red/purple/pink and white screen after running Browserhax

这可能代表着你的主机已经安装过了自制固件。 你应该检查一下。

"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

arm11code.bin 文件丢失或位置错误。 下载最新版本的 universal-otherapp 并将其放在你 SD 卡的根目录中，然后重命名为 arm11code.bin。 如果你下到的东西看不到 .bin 后缀，请不要重命名它。

"An error has occurred, forcing the software to close..." (white message box)

这可能说明你放的 arm11code.bin 文件有问题。 下载最新版本的 universal-otherapp 并将其放在你 SD 卡的根目录中，然后重命名为 arm11code.bin。 如果你下到的东西看不到 .bin 后缀，请不要重命名它。

You can also try resetting your browser save data:

  1. 打开浏览器，进入浏览器设置页面
  2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
  3. 再次尝试触发漏洞
Opening the browserhax QR code or URL crashes

基于浏览器的破解漏洞（例如你正在使用的这个）不稳定并经常崩溃，你可以尝试按照下面的步骤修复：

  1. 打开浏览器，进入浏览器设置页面
  2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
  3. 再次尝试触发漏洞
System Update prompt when opening browser

你可能没有正确配置 SSLoth 代理服务器。 尝试重做页面上的 SSLoth 部分内容。

Error 032-0420 when opening browser

按照以下步骤操作：

  1. Launch System Settings on your console
  2. 进入到 互联网设置（インターネット設定 / Internet Settings） -> 连接设置（インターネット接続設定 / Connection Settings）
  3. 点击你目前在用的连接点槽位，然后进入到 设置变更（設定変更 / Change Settings） -> 下一页（右箭头） -> 代理设置（Proxy）
  4. 将 “代理设置（Proxy）”设置为 “否（No/しない）”
  5. 点击 OK，然后点击保存（保存する / Save）
  6. 当提示时，点击“测试（テスト / Test）”进行连接测试
    • 测试应该会成功
  7. 点击 “OK” 继续
  8. 点两次 “返回”，然后点“关闭”来返回主菜单。
  9. 打开浏览器
  10. 如果它提示需要系统更新，点击 OK
    • 这实际不会将系统更新
  11. 重新从第二步开始
Frozen on "Doing agbhax..."

这可能说明你放的 arm11code.bin 文件有问题。 重新下载最新版本的 universal-otherapp 并将其放在你 SD 卡的根目录中，然后重命名为 arm11code.bin。 如果你下到的东西看不到 .bin 后缀，请不要重命名它。

"PrepareArm9ForTwl returned error c8804631!"

如需帮助，请加入 Nintendo Homebrew Discord 服务器。

Failed to mount the SD card!

备份好你 SD 卡上的文件，然后根据你的操作系统选择一个工具来重新格式化 SD 卡为 FAT32 格式：Windows、macOS、Linux。 目前已知 MiniTool Partition Wizard 和惠普格式化工具（HPUSBDisk）格出来的 SD 卡给 3DS 使用会出问题。

如果还是不行，尝试换一张 SD 卡。

Installing boot9strap (super-skaterhax)

"An error has occurred. Please save your data in any software currently in use, then restart the system."

The date is set incorrectly. To set it correctly, follow these steps:

  1. Select the System Settings icon on the HOME Menu, and tap Open.
  2. Tap Other Settings.
  3. Tap Date & Time.
  4. Tap Today’s date.
  5. Tap Up/Down Arrows to set the correct Day, Month and Year.
  6. Select OK to confirm.

If the problem persists:

  • Ensure that arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, and boot.3dsx are on the root of the SD card (not inside of any folder)
  • Ensure that you selected the correct payload for your region AND system version
  • Ensure that your region settings look like this
  • Try resetting your browser data:
    1. 打开浏览器，进入浏览器设置页面
    2. Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
    3. 再次尝试触发漏洞
  • Try changing the system language to something other than the current language
"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

arm11code.bin 文件丢失或位置错误。 Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).

An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!

这可能代表着你的主机已经安装过了自制固件。 你应该检查一下。

Installing boot9strap (MSET9)

(title/import).db does not exist, create them now?" / invalid database

Full error messages:

  • “Nintendo 3DS/<ID0>/<ID1>/dbs/<import.db and/or title.db> does not exist on SD card! Create them now? (type yes/no)”
  • “Invalid database”

This happens when no valid title database is present, usually because you never installed any titles from eShop on this SD card.

  1. Type “yes”, then press Enter
  2. Insert the SD card into your console
  3. Power on your console
  4. Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
  5. 将主机关机
  6. Insert the SD card into your computer
  7. Return to Section I Step 7
[WinError 5] Access is denied

The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.

UnboundLocalError: cannot access local variable 'haxid1_path'

This can happen when Option 1 stopped because of an error and there is an incomplete installation.

  1. Close the script window
  2. Execute the mset9.py script on the root of the SD card
    • Windows: Double-click mset9.bat +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
    • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
    • You should see a window that says “MSET9 … SETUP by zoogie”
  3. Type the number corresponding to your console model and version, then press Enter
  4. Type 4, then press Enter to remove MSET9
  5. Return to the beginning of Section I
Red screen after reinserting SD card (Section II Step 11)

You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.

Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux (this will wipe your SD card data)

assert(id0_count == 1) AssertionError

You have multiple ID0 folders. To determine the correct folder, follow these instructions:

  1. 将 Nintendo 3DS 文件夹重命名为 BACKUP_Nintendo 3DS
  2. Reinsert your SD card into your console
  3. Power on your console
  4. Wait for the console to generate the SD card data
    • 你先前安装的程序会暂时消失。 这是正常的，且接下来就会还原回来。
  5. 将主机关机
  6. 将你的 SD 卡插入到电脑
  7. 打开你 SD 卡的 Nintendo 3DS 文件夹
  8. Write down the first few characters of the folder you see
    • This is your true ID0, which we will keep in the real Nintendo 3DS folder
  9. Delete the ID0 from the current Nintendo 3DS folder
  10. Move the true ID0 folder from the BACKUP_Nintendo 3DS folder to the Nintendo 3DS folder
  11. If it exists, move the Private folder from the BACKUP_Nintendo 3DS folder to the Nintendo 3DS folder

Once you’ve done this, continue from Section I Step 7.

assert(mii_ok==1) AssertionError

Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.

  1. Close the script window
  2. Execute the mset9.py script on the root of the SD card
    • Windows: Double-click mset9.bat
      • If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
    • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
    • You should see a window that says “MSET9 … SETUP by zoogie”
  3. Type the number corresponding to your console model and version, then press Enter
  4. Type 4, then press Enter to remove MSET9
  5. Insert the SD card into your console
  6. Power on your console
  7. Launch Mii Maker
  8. Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
  9. 将主机关机
  10. Insert the SD card into your computer
  11. Return to Section I Step 7
System Settings loading infinitely after reinserting the SD card

You most likely did something different from the MSET9 instructions, or selected the wrong model or version.

  1. Close the script window
  2. Execute the mset9.py script on the root of the SD card
    • Windows: Double-click mset9.bat
      • If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
    • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
    • You should see a window that says “MSET9 … SETUP by zoogie”
  3. Type the number corresponding to your console model and version, then press Enter
  4. Type 3, then press Enter
  5. Once the window says “Deleting… done.”, insert the SD card into your console
  6. Power on your console
  7. Return to Section II Step 1

If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:

  1. Close the script window
  2. Execute the mset9.py script on the root of the SD card
    • Windows: Double-click mset9.bat
      • If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
    • Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
    • You should see a window that says “MSET9 … SETUP by zoogie”
  3. Type the number corresponding to your console model and version, then press Enter
  4. Type 4, then press Enter to remove MSET9
  5. Insert the SD card into your console
  6. Power on your console
  7. Launch Mii Maker
  8. Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
  9. 将主机关机
  10. Insert the SD card into your computer
  11. Return to Section I Step 7

完成安装

Unable to update console

以下是可以尝试的解决方法，按从简单到困难的顺序排列。

  1. 将 DNS 设置为“自动（Auto）”
  2. 将主机靠近 WiFi 路由器
  3. 尝试在安全模式下更新主机，在开机时按住 L + R +↑ + A 键来进入安全模式，然后跟随屏幕上的指示做
  4. 删除你的 Wifi 连接点然后重新再设置一次
  5. 重启你的 WiFi 路由器
  6. 连接其他的 WiFi，比如移动热点
  7. Nintendo 服务器可能临时下线，稍后再试
  8. 如果仍然提示错误，请进行 CTRTransfer，然后再尝试一次更新
  9. 如需援助，请加入 Nintendo Homebrew Discord 服务器并说英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 QQ 群寻求帮助，群号为 942052497。
Error #02: Missing essential.exefs

You said ‘No’ to the “Make essential files backup?” prompt in GodMode9. Power off your console, power it on while holding (Start) to re-enter GodMode9, say ‘Yes’ to the prompt, then try again.

Unable to open GodMode9 or Error #03: Missing files

You did not copy everything from finalize.zip to the root of your SD card. Remember, your SD card should have at least these files:

Error #04: No space

You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. If you don’t have enough space, follow these steps:

  1. 将主机关机
  2. 将你的 SD 卡插入到电脑
  3. Copy the Nintendo 3DS folder from the root of your SD card to your computer
  4. Delete the Nintendo 3DS folder from the SD card
  5. Reinsert your SD card into your console
  6. Press and hold (Start), and while holding (Start), power on your console. 这会启动 GodMode9
  7. Press the (Home) button
  8. 选择 “Scripts…”
  9. Select “finalize”
  10. Press (A) to create a NAND backup
    • This may take around fifteen minutes
  11. Press (A) again
    • The console should automatically power off
  12. 将你的 SD 卡插入到电脑
  13. Copy the files in /gm9/backups/ on your SD to a safe location on your computer
  14. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card
  15. Copy the Nintendo 3DS folder from your computer to the root of your SD card
  16. Delete the Nintendo 3DS folder from your computer

Now that you have your NAND backup in a safe place:

  1. Reinsert your SD card into your console
  2. Press and hold (Start), and while holding (Start), power on your console. 这会启动 GodMode9
  3. Press the (Home) button
  4. 选择 “Scripts…”
  5. Select “finalize”
  6. Continue the script as normal
    • The NAND backup will be automatically skipped
Information #05: No title database

Press (A) to import a title database, unlock SysNAND writing by entering the buttons on-screen, then continue the script as normal.

Error #06 or "Error: Could not open directory" when attempting a NAND backup

Make sure you have at least 1.3GB available in your SD card. If you don’t have enough space, follow these steps:

  1. 将主机关机
  2. 将你的 SD 卡插入到电脑
  3. Copy the Nintendo 3DS folder from the root of your SD card to your computer
  4. Delete the Nintendo 3DS folder from the SD card
  5. Reinsert your SD card into your console
  6. Press and hold (Start), and while holding (Start), power on your console. 这会启动 GodMode9
  7. Perform a NAND Backup
  8. Copy the files in gm9/out on your SD to a safe location on your computer
  9. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card, keeping essential.exefs in /gm9/out/
  10. Copy the Nintendo 3DS folder from your computer to the root of your SD card
  11. Delete the Nintendo 3DS folder from your computer

If you have enough space on your SD card, your SD might be corrupted or faulty. Check your SD card for any errors by following the guide according to your computer’s operating system: Windows, Linux, macOS.

Error #09: Unsupported GodMode9 version

You are somehow running a version of GodMode9 not packaged with the script. Make sure you copied the contents of finalize.zip to the root of your SD card and that you are holding START while powering on your console.

Error #11: Missing donor database

You did not copy everything from finalize.zip to the root of your SD card. Remember, your SD card should have at least these files:

Error #12: Copy (file).db fail

Ensure that your SD card is not locked. If the SD card is not locked and you continue to get this error, join Nintendo Homebrew on Discord for assistance.

Information #17: Duplicate NAND backup

The script has detected that the Nintendo 3DS folder is missing AND that you have already made a NAND backup before. If you intend to install homebrew applications, you should do the following:

  1. Press (B) to cancel making another NAND backup
  2. Hold (R) and press (Start) at the same time to power off your console
  3. Copy the contents of /gm9/backups/ to a safe location on your computer
  4. Delete /gm9/backups/ from your SD card
  5. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card
    • If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it
  6. Press and hold (Start), and while holding (Start), power on your console. 这会启动 GodMode9
  7. 按下 “Home” 键来打开功能菜单
  8. 选择 “Scripts…”
  9. Select “finalize”
  10. Follow the prompts in the script, answering any questions that you are asked

Boot issues on consoles with custom firmware

The steps detailed here generally assume that your console has a modern custom firmware setup (boot9strap + Luma3DS 8.0 or greater). 如果你的主机还在用旧版的自制固件（例如基于 arm9loaderhax 或 menuhax 的东西），则你应该在继续操作前先升级自制固件。

Power/notification light indicators

My console powers off when I try to turn it on, and/or the notification LED shows a color on boot

这说明你放的 boot.firm 文件有问题。 如果你的主机正在使用 boot9strap 1.4 版，那么你的主机在这种情况下开机后，通知灯就会亮起某种特定的颜色，然后关机。 具体亮起的颜色可用来判断你内存卡或主机内存中的 boot.firm 的问题。 On older versions of boot9strap, the blue light will power off almost immediately when trying to turn on the console.

如果通知灯亮起：

  • White: Your 3DS was not able to find boot.firm on your SD card or on internal memory.
  • Magenta: Your 3DS was not able to find boot.firm on your SD card. 主机内存中可以找到 boot.firm 文件，但是文件已损坏。
  • Red: Your 3DS was able to find boot.firm on both your SD card and on internal memory, but both files are corrupted.

你可以通过下载 最新版本的 Luma3DS，然后解压，将 boot.firm 复制到 SD 卡的根目录。 如果 boot.firm 始终被主机判定为损坏，则你可能需要使用一个工具来测试一下你的 SD 卡（Windows、Linux、macOS） 另外，最好不要使用 WinRAR 解压文件，解压的文件给 3DS 使用可能会出问题。

If you hear a “popping sound”, potentially accompanied with the backlight turning on for a split second, there is a hardware issue with your console (such as a disconnected backlight cable). You may be able to get your console to boot by holding it at certain angles.

My console gets stuck on a black screen with blue power light staying on

你可以把下面所列出的方法都试试，此处将方法从最省时到最耗时的顺序排列。

  1. Power off your console, remove the SD card, re-insert it, then power on your console.
  2. Power off your console, eject the game cartridge if inserted, power on your console, then wait up to ten minutes. If your console boots within ten minutes, the issue has been fixed and is unlikely to reoccur
  3. 将 SD 卡上的 Nintendo 3DS 文件夹重命名为 Nintendo 3DS_BACKUP，然后尝试启动主机。 If your console successfully boots, there is some issue within your Nintendo 3DS folder. 尝试清理主菜单的外部存储文件：
    • 进入到 /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/
    • 删除对应你的 3DS 区域的文件夹：
      • 欧版: 00000098
      • 日版: 00000082
      • 美版: 000008f
      • 中国版（神游版）: 000000A1
      • 韩版: 000000A9
      • 台湾版: 000000B1
  4. 尝试启动到恢复模式并升级系统：
    • Power off your console
    • 按住 “L” + “R” + “↑” + “A” 四个键
    • Power on your console
    • If you were successful, the console will boot to an “update your system” screen
  5. 尝试做 CTRTransfer
  6. 如需援助，请加入 Nintendo Homebrew Discord 服务器并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 QQ 群 寻求帮助，群号为 942052497。

Error message on boot

"An error has occurred: Failed to apply 1 FIRM patch(es)" or "An exception has occurred -- Current process: pm"

你主机的 Luma3DS 版本已过时。 下载最新版本的 Luma3DS 并将 boot.firm 放在你 SD 卡的根目录中，如有存在相同文件请替换。 请不要用 WinRAR 解压 ZIP 文件，我们目前已知这会导致与 3DS 有关的文件出错。

"Unable to mount CTRNAND or load the CTRNAND FIRM. Please use an external one."

There are a number of reasons as to why this could be happening. In any case, this error can usually be fixed by following the CTRTransfer guide.

"An error has occurred. Hold down the POWER button to turn off the power..."

ARM11 异常处理器已被禁用，或主机未安装自制固件。 尝试启用 ARM11 异常处理器： + Power off your console + 按住 “Select” 键 + Power on your console, while still holding (Select) + 如果 “ARM11 exception handlers disabled” 已被勾选，则请取消勾选它

HOME Menu is missing installed applications

This could be caused by various reasons, but most likely because your SD card is not being read by the system. You can check if your SD is being read by holding SELECT on boot and checking the yellow text on the bottom screen; if it says “Booted from CTRNAND via B9S”, then your console is booting from the internal memory and not from the SD card. If this is the case, attempt the steps below, which are listed from easiest to hardest:

  1. Power off your console, remove the SD card, re-insert it, then power on your console
  2. Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
  3. Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux (this will wipe your SD card data)
  4. Test your SD card for errors by following the guide according to your computer’s operating system: Windows, Linux, macOS. If your SD card is marked as faulty, then you will have to replace your SD card
  5. Your SD card slot may be broken. Join Nintendo Homebrew on Discord for further assistance
Blue "BOOTROM ERROR" screen

Your console is likely hard-bricked. You will need to buy an ntrboot flashcart to reinstall boot9strap in order to attempt to fix your console. 这也可能是无法修复的硬件问题。 无论如何，请先加入 Nintendo Homebrew Discord 服务器 并说英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 QQ 群寻求帮助，群号为 942052497。 + 还有可能有人设了一个看上去就像变砖了的开机画面。 Try leaving your console powered on, waiting on the blue screen, for five minutes.

Some other error

请对报错拍照，然后加入 Nintendo Homebrew Discord 服务器并说英文以获取援助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 QQ 群寻求帮助，群号为 942052497。

Software issues on consoles with custom firmware

DSi / DS functionality is broken or has been replaced with Flipnote Studio
  1. 下载最新版本的 TWLFix-CFW （下载 .3dsx 文件）
  2. 将主机关机
  3. 检查 SD 卡的根目录是否存在一个名为 3ds 的文件夹，如果没有则手动新建一个
  4. 复制 TWLFix-CFW.3dsx 到你内存卡的 /3ds/ 文件夹
  5. Reinsert your SD card into your console
  6. 启动 Homebrew Launcher
  7. 在自制程序列表中找到 TWLFix-CFW
  8. 按下 “A” 键来卸载损坏的 TWL 程序
  9. Press (Start) to reboot the console
  10. Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • 更新程序将检查到你主机基本的 TWL 程序被卸载，然后它将重新安装它们
  11. Once the update is complete, tap “OK” to reboot the console
GBA Virtual Console and/or Safe Mode functionality is broken

Your console is running Luma3DS 6.6 or older, likely via arm9loaderhax. You should follow A9LH to B9S to update your console to a modern custom firmware environment.

Extended memory mode games (Pokemon Sun/Moon, Smash, etc.) don't work

旧版 3DS / 2DS 在做完 CTRTransfer 或区域变更之后可能会出现这个问题。 You will need to system format your console to fix this issue.

Exception screen when booting/loading an application

Look for your exception screen in this page. If you weren’t able to find your error or the instructions didn’t work, join Nintendo Homebrew on Discord for further assistance.

Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher

Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of menuhax67 (the menuhax .zip), then follow the “Uninstall menuhax67” section here.

其他问题

Clear HOME Menu extdata
  1. 将主机关机
  2. 将你的 SD 卡插入到电脑
  3. 打开你 SD 卡的 /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ 文件夹
  4. 删除对应你的 3DS 区域的文件夹：
    • 欧版: 00000098
    • 日版: 00000082
    • 美版: 000008f
    • 中国版（神游版）: 000000A1
    • 韩版: 000000A9
    • 台湾版: 000000B1
  5. Reinsert your SD card into your console
Clear HOME Menu theme data
  1. 将主机关机
  2. 将你的 SD 卡插入到电脑
  3. 打开你 SD 卡的 /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ 文件夹
  4. 删除对应你的 3DS 区域的文件夹：
    • 欧版：000002ce
    • 日版：000002cc
    • 美版：000002cd
  5. Reinsert your SD card into your console
Manually entering Homebrew Launcher

If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need boot.3dsx and boot.firm on the root of your SD card.)

  1. 启动“下载通信(Download Play)”程序 ()
  2. 等到你看到 Nintendo 3DS 和 Nintendo DS 按钮
  3. 同时按下 “L” + “↓” + “Select” 键来打开 Rosalina 菜单
  4. 选择 “Miscellaneous options”
  5. 选择 “Switch the hb. title to the current app.”
  6. 按 “B” 键继续
  7. 按 “B” 键返回 Rosalina 主菜单
  8. 按 “B” 键退出 Rosalina 菜单
  9. Press (Home) to suspend Download Play
  10. Press the “Close” button on the bottom screen to close Download Play
  11. Re-launch the Download Play application
  12. Your console should load the Homebrew Launcher
    • If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card
Turning off Parental Controls

You can disable the Parental Controls feature by going to System Settings -> Parental Controls and inserting the PIN, then pressing “Clear Settings”, then “Delete” to remove it. However, if you do not know the PIN and therefore cannot access the console’s settings, you will need to disable it. In order to do this, you need to obtain your console’s master key (mkey):

  1. Go to this website
  2. Fill the following boxes with the information:
    • Device Type: Select “3DS” (the same applies if you are using a 2DS, New 3DS (XL/LL) or New 2DS (XL/LL))
    • System Date: The day and month your console’s clock is set to
    • Inquiry Number: Can be obtained by pressing “Forgot PIN” then “I Forgot” in the Parental Controls screen
  3. After you have obtained your mkey, press OK on the screen you have obtained your Inquiry Number, then input the master key
  4. Press “Clear Settings”, then “Delete” to remove all Parental Controls data