---
title: "BannerBomb3 + Fredtool (TWN)"
---

{% include toc title="Tabla de contenidos" %}

### Lectura requerida

Para volcar una aplicación DSiWare del sistema, aprovecharemos un fallo en la ventana de Gestión de datos DSiWare de la aplicación Configuración.

To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system to dump the DSi Internet Settings application to the SD root.

Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.

These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
{: .notice--warning}

### What you need

- Your `movable.sed` file completing [Seedminer](seedminer)
- The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
- The latest release of [b9stool](https://github.com/zoogie/b9sTool/releases/latest) (`boot.nds`)
- The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) (`Frogminer_save.zip`)

#### Sección I - Verificación de CFW

1. Apaga tu consola
1. Mantén pulsado el botón (Select)
1. Enciende la consola mientras mantienes presionado (Select)
1. If the check was successful, you will boot to the HOME Menu and you may proceed with this guide

If you see a configuration menu, you already have CFW, and continuing with these instructions may BRICK your device! Sigue la sección de [Comprobación de CFW](checking-for-cfw) para actualizar tu CFW existente.
{: .notice--danger}

#### Sección II - Preparativos

1. Apaga tu consola
1. Inserta tu tarjeta SD en tu computadora
1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD
    + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
1. Copia `boot.nds` (B9STool) a la raíz de tu tarjeta SD
1. Copia la carpeta `private` contenida en el `.zip` de Frogminer_save a la raíz de tu tarjeta SD
1. Keep your SD card in your computer - there are more things to do in the next section

![]({{ "/images/screenshots/fredtool-root-layout.png" | absolute_url }})
{: .notice--info}

#### Section III - BannerBomb3

1. Open the [DSIHaxInjector V2](https://jenkins.nelthorya.net/job/DSIHaxInjector%20v2/build?delay=0sec) website on your computer
1. Under the "Username" field, enter any alphanumeric name (no spaces or special characters)
1. Under the "MovableSed" field, upload your `movable.sed`using the "Browse..." option
1. Click "Build"
1. Wait a few seconds, then click "Last build (#number) x sec ago"
1. Click the "output_(name).zip" link
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` on your SD card
  + La `<ID0>` en cuestión es la misma que usaste en [Seedminer](seedminer)
  + El `<ID1>` es una carpeta con un nombre compuesto por 32 caracteres, dentro de `<ID0>`
1. Create a folder named `Nintendo DSiWare` inside of the `<ID1>`
  + If you already had the folder *and* there are any existing DSiWare backup files (`<8-character-id>.bin`) inside, copy them to your PC and remove them from your SD card
1. Open the output_(name) `.zip` file and navigate to `China_Taiwan` -> `output_setup`
1. Copy all six `.bin` files to the `Nintendo DSiWare` folder
1. Vuelve a insertar tu tarjeta SD en tu consola
1. Enciende tu consola
1. Entra a Configuración de la consola
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` -> (page 2)
1. Take note of what number is on the DSiWare title on the second page (it will be a number between 1 and 6)
1. Apaga tu consola
1. Inserta tu tarjeta SD en tu computadora
1. Ve a `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` en tu tarjeta SD 
1. Open the output_(name) `.zip` file and navigate to `China_Taiwan` -> `output_hax`
1. Copy the `.bin` file that is the same number as the one that was on the second page of the DSiWare Management menu to the `Nintendo DSiWare` folder, and overwrite when prompted
1. Enciende tu consola
1. Entra a Configuración de la consola
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card`
1. Wait a while
     + The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the device showing an error message and rebooting
    + If you did not see the purple screen, then something went wrong
1. You should now have the file `42383821.bin` on the root of your SD card
1. Ve a `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` en tu tarjeta SD 
1. Delete all of the `.bin` files in the `Nintendo DSiWare` folder

#### Section IV - Fredtool

1. Open the [DSIHaxInjector_new](https://jenkins.nelthorya.net/job/DSIHaxInjector_new/build?delay=0sec) website on your computer
1. Under the "Username" field, enter any alphanumeric name (no spaces or special characters)
    + You might want to put in a different name to differentiate it from BannerBomb3's output
1. Under the "DSiBin" field, upload your `42383821.bin` file using the first "Browse..." option
1. Under the "MovableSed" field, upload your `movable.sed` file using the second "Browse..." option
1. Under the "InjectionTarget" field, set the injection target to `DSdownloadplay`(NOT memorypit)
1. Click "Build"
1. Wait a few seconds, then click "Last build (#number) x sec ago"
1. Click the "output_(name).zip" link
1. Ve a `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` en tu tarjeta SD 
1. Copy the `484E4441.bin`  file from the `hax` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Vuelve a insertar tu tarjeta SD en tu consola
1. Enciende tu consola
1. Entra a Configuración de la consola
1. Ve a `Data Management` -> `DSiWare`
1. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
1. Select “Copy”, then select “OK”
1. Exit System Settings
1. Launch Download Play on your device (the orange icon with a 3DS on it)
1. Selecciona "Nintendo DS" 
1. If the exploit was successful, your 3DS will have loaded into the JPN version of Flipnote Studio

#### Section V - Flipnote Exploit

Si prefieres una guía visual para esta parte, hay una disponible [aquí](https://zoogie.github.io/web/flipnote_directions/).
{: .notice--info}

1. Completa la configuración del juego hasta que llegues al menú principal
  + Selecciona la opción de la izquierda cuando te lo pida durante la configuración inicial
1. Utilizando la pantalla táctil, selecciona el cuadrado grande de la izquierda, luego selecciona el cuadrado con el ícono de una tarjeta SD
1. Una vez que cargue el menú, selecciona el ícono con una cara, luego el ícono abajo a la derecha de la pantalla para continuar
1. Presiona (X) o (Arriba) en el D-Pad dependiendo de cuál se muestre en la pantalla superior
1. Elige el segundo botón de los que están en la parte de arriba, con un ícono de rollo de película
1. Ve hacia la derecha hasta seleccionar el carrete "3/3"
1. Toca el tercer cuadrado con una letra "A" en él
1. Ve hacia la izquierda hasta el carrete "1/3"
1. Toca el cuarto cuadrado con una letra "A" en él
1. Si el exploit fue exitoso, tu consola habrá cargado b9sTool
1. Using the D-Pad, move to “Install boot9strap”
    + If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open DS Download Play and start over from the beginning of this section
1. Presiona (A), luego presiona START y SELECT al mismo tiempo para iniciar el proceso
1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
    + Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
    + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
    + If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide

#### Section VI - Luma3DS Verification

1. Apaga tu consola
1. Inserta tu tarjeta SD en tu computadora
1. Verify that a `luma` folder exists and that `config.ini` is inside of it
  + The existence of these folders and files confirms that Luma3DS is installed
  + If you do not see the `luma` folder or `config.ini`, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)

At this point, your console will boot to Luma3DS by default.
  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  + On the next page, you will install useful homebrew applications to complete your setup.

#### Section VII - Restoring DS Download Play

1. Ve a `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` en tu tarjeta SD 
1. Copy the `484E4441.bin`  file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
1. Vuelve a insertar tu tarjeta SD en tu consola
1. Enciende tu consola
1. Entra a Configuración de la consola
1. Ve a `Data Management` -> `DSiWare`
1. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
1. Select “Copy”, then select “OK”
1. Exit System Settings
1. Apaga tu consola

___

### Continúa en [Finalizar instalación](finalizing-setup)
{: .notice--primary}