---
title: "Installing boot9strap (Fredtool-Inject)"
---

{% include toc title="目录内容" %}

{% capture technical_info %}
<summary><em>技术细节（选看）</em></summary>

本章节 Seedminer 将使用你的 `movable.sed` 文件来解密所有的 DSiWare 程序，以便在3DS中内置的 DS 网络设定中注入修改后的 DSiWare 程序。

本教程是使用 “FIRM partitions known-plaintext” 漏洞来进行破解的， 欲知相关资料请查阅[这里](https://www.3dbrew.org/wiki/3DS_System_Flaws)。

{% endcapture %}
<details>{{ technical_info | markdownify }}</details>
{: .notice--info}

You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
{: .notice--warning}

### 你需要准备点啥？

* Your `movable.sed` file from completing [Seedminer](seedminer-(alternate))
* Your DSiWare backup from completing [Dumping eShop DSiWare](dumping-eshop-dsiware)
* 最新版本的 [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)（下载 `Frogminer_save.zip`）
* **11.16.0 or 11.17.0 users**: The v6.1.1 release of [b9sTool](https://github.com/zoogie/b9sTool/releases/download/v6.1.1/release_6.1.1.zip)
    * Make **absolutely sure** that you are one of these firmwares, as being on other firmwares may lead to a BRICK
* 最新版本的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)（下载 Luma3DS `.zip` 文件）

#### 第一步 – 检查自制固件

{% include_relative include/cfw-check-fredtool.txt %}

#### 第二步 – 准备工作

本节中，你将会临时将 DS 连接设置（DS Connection Settings）程序临时替换为 Flipnote Studio，用来启动 boot9strap（自制固件）安装器。

1. 将你的 SD 卡插入到电脑
1. 在电脑上打开 [DSIHaxInjector_new](https://jenkins.nelthorya.net/job/DSIHaxInjector_new/build?delay=0sec) 站点
1. 于“Username”一行，填入一个你的英文名（不带空格或特殊字符）
1. Under the "DSiBin" field, upload your DSiWare backup file (e.g. 42383841.bin) from the root of your SD card using the first "Browse..." option
1. 于“MovableSed”一行，点击“Browse...”（选择文件）上传你的 `movable.sed` 文件
1. Under the "InjectionTarget" field, set the injection target to `DSinternet` (NOT memorypit)
1. 点击 “Build”
    + 等待片刻，直到构建完成
1. 将你的名字输入左边的 Build History 菜单中的 Filter Builds 一栏
1. 点击第一个搜索结果
    + 它应该是所有显示的结果中时间最新的那一个
1. 点击 "output_(<你的名字>).zip" 的链接
1. 打开内存卡的 `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` 文件夹
    + `<ID0>` is the 32-letter folder name that you copied in [Seedminer](seedminer)
    + `<ID1>` is a 32-letter folder inside of the `<ID0>`
1. Copy the `42383841.bin`  file from the `hax` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
    ![]({{ "/images/screenshots/bb3/dsiware-location-4.png" | absolute_url }}){: .notice--info}
1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
    + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
1. Copy `boot.nds` (B9STool) from the release `.zip` to the root of your SD card
1. 从 Frogminer_save `.zip` 压缩包中复制 `private` 文件夹到内存卡的根目录
1. Reinsert your SD card into your console
1. Power on your console

    ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
    {: .notice--info}


#### Section III - Overwriting DS Connection Settings

本节中，你将把被修改过的 DS 连接设置应用程序复制进内部存储，这将临时替换其为 Flipnote Studio。

1. Launch System Settings on your console
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
1. 选择 “Haxxxxxxxxx!”
    + If you are unable to select the "Haxxxxxxxxx" title, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-fredtool-inject)
1. 选择 “Copy” ，然后选择 “OK”

#### Section IV - Flipnote Exploit

In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.

If you would prefer a visual guide to this section, one is available [here](https://zoogie.github.io/web/flipnote_directions/).
{: .notice--info}

1. 返回系统设置的主菜单
1. Navigate to `Internet Settings` -> `Nintendo DS Connections`, then select "OK" ([image](/images/screenshots/fredtool/dsconnection.png))
1. If the exploit was successful, your console will have loaded the JPN version of Flipnote Studio
    + If your console does not load the JPN version of Flipnote Studio, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-fredtool-inject)
{% include_relative include/exploit-flipnote.txt %}

#### 第五步 – 安装 boot9strap

{% include_relative include/install-boot9strap-b9stool.txt %}

#### Section VI - Luma3DS Configuration

1. Press and hold (Select), and while holding (Select), power on your console
{% include_relative include/configure-luma3ds.txt %}

{% include_relative include/luma3ds-installed-note.txt %}

#### Section VII - Restoring DS Connection Settings

In this section, you will restore DS Connection Settings to the way it was before it was temporarily replaced with Flipnote Studio in an earlier section.

1. 打开内存卡的 `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` 文件夹
1. Copy the `42383841.bin`  file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder, replacing the existing one
1. Reinsert your SD card into your console
1. Power on your console
1. Launch System Settings on your console
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
1. 选择 “Nintendo DSi™”
1. 选择 “Copy” ，然后选择 “OK”

___

### 继续至[完成安装](finalizing-setup)
{: .notice--primary}