--- title: "Setup abschließen" --- {% include toc title="Inhalt" %} ### Required Reading The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND. In this case, we are using Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to patch the device, allowing it to run homebrew software. On this page, we will make critical system file backups and install the following homebrew programs: + **FBI** *(installs CIA formatted applications)* + **Anemone3DS** *(installiert benutzerdefinierte Themes)* + **Checkpoint** *(Sichern und Wiederherstellen der Speicherdaten von 3DS- und DS-Spielen)* + **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over Wi-Fi)* + **GodMode9** *(Multifunktionstool, welches NAND- und Cartridge-Funktionen ausführen kann)* + **Homebrew Launcher Loader** *(startet den Homebrew Launcher)* It is not recommended to skip downloading any of these applications, as many of them will be used later on this page. At the end of this page, your SD card will be cleaned up by removing unnecessary installation files. {: .notice--warning} If your **New 3DS** was on firmware 2.1.0 before following this guide, you should [restore your NAND backup](godmode9-usage#restoring-a-nand-backup) before continuing. {: .notice--warning} If your previous CFW setup was EmuNAND-based and you wish to move the contents of your EmuNAND/RedNAND to SysNAND, follow [Move EmuNAND](move-emunand) before following this page. If you don't know what an EmuNAND is, this doesn't apply to you. {: .notice--info} ### Was du brauchst * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (get the `.cia` file) * The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (get the `.cia` file) * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (get the `.cia` file) * The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (get the `.cia` file) * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (get **both** the `.cia` and `.3dsx` files) * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (get the GodMode9 `.zip` file) ### Anleitung #### Schritt I - Vorbereitungen 1. Schalte dein Gerät aus 1. Stecke deine SD-Karte in deinen Computer 1. Erstelle einen Ordner namens `cias` im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert 1. Copy all of the CIA files (`Anemone3DS.cia`, `Checkpoint.cia`, `FBI.cia`, `Homebrew_Launcher.cia`, and `Universal-Updater.cia`) to the `/cias/` folder on your SD card 1. Erstelle einen Ordner namens `3ds` im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Kopiere `FBI.3dsx` in den `/3ds/`-Ordner auf deiner SD-Karte 1. Erstelle einen Ordner mit dem Namen `payloads` im Ordner`luma` deiner SD-Karte, falls er noch nicht existiert 1. Kopiere `Godmode9.firm` von der Godmode9 `.zip` nach `/luma/payloads/` auf deiner SD Karte 1. Kopiere den Ordner `gm9` aus der GodMode9 `.zip`in das Stammverzeichnis deiner SD-Karte 1. Stecke deine SD-Karte wieder in dein Gerät 1. Schalte deine Konsole an ![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }}) {: .notice--info} ![]({{ "/images/screenshots/godmode9-location.png" | absolute_url }}) {: .notice--info} These screenshots indicate the minimum SD card layout that is required to follow this page. You may have extra files or folders on your SD card, depending on your previous setup or the method that you followed. #### Schritt II - Aktualisierung des Systems 1. Aktualisiere deine Konsole indem du zu den Systemeinstellungen wechselst, danach "Allgemeine Einstellungen" auswählst, ganz nach rechts navigierst (letzter Punkt im unteren Bildschirm) und dann das "System-Update" startest + Updates mit B9S + Luma (welches du hast) sind sicher + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section + Wenn du eine Fehlermeldung bekommst, musst du die DNS-Einstellungen auf "automatisch beziehen" setzen + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#unable-to-update-device) #### Section III - Homebrew Launcher 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the `Nintendo 3DS` and `Nintendo DS` buttons 1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Wähle "Miscellaneous options" 1. Wähle "Switch the hb. title to the current app." 1. Drücke (B) um fortzufahren 1. Drücke (B), um zum Rosalina-Hauptmenü zurückzukehren 1. Drücke (B), um das Rosalina-Menü zu schließen 1. Drücke (Home) und schließe die Download-Spiel Anwendung 1. Starte die Download-Spiel Anwendung 1. Deine Konsole sollte den Homebrew Launcher laden #### Section IV - RTC and DSP Setup 1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Wähle "Miscellaneous options" 1. Select "Dump DSP firmware" 1. Drücke (B) um fortzufahren 1. Select "Nullify user time offset" 1. Drücke (B) um fortzufahren 1. Drücke (B), um zum Rosalina-Hauptmenü zurückzukehren 1. Drücke (B), um das Rosalina-Menü zu schließen #### Section V - Installing CIAs 1. Starte FBI aus der Liste des Homebrews 1. Navigiere zu `SD` -> `cias` 1. Wähle "\" 1. Wähle "Install and delete all CIAs" aus und drücke (A) zum Bestätigen 1. Drücke (Home) und schließe die Download-Spiel Anwendung #### Schritt VI - CTRNAND Luma3DS 1. Schalte deinen 3DS aus 1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 + If you do not boot into GodMode9, ensure that `GodMode9.firm` is in `/luma/payloads/` and that `payloads` is correctly spelled 1. Wenn du aufgefordert wirst, ein "essential files backup" durchzuführen, drücke (A). Drücke erneut (A) nachdem es abgeschlossen ist 1. Wenn du aufgefordert wirst Datum und Uhrzeit der "RTC" (Real Time Clock, Echtzeituhr) zu korrigieren, drücke (A), stelle Datum und Uhrzeit ein und drücke (A) um fortzufahren 1. Drücke (HOME) um das Aktionsmenü aufzurufen 1. Wähle "Scripts" 1. Select "GM9Megascript" 1. Select "Scripts from Plailect's Guide" 1. Select "Setup Luma3DS to CTRNAND" 1. Drücke (A), wenn du dazu aufgefordert wirst, um fortzufahren 1. Drücke (A), um die SysNAND (Stufe 1) Bearbeitung zu aktivieren. Dann gebe die angegebene Tastenkombination ein 1. Drücke (A) um fortzufahren #### Section VII - Cleanup SD Card 1. Select "Cleanup SD Card" 1. Drücke (A), wenn du dazu aufgefordert wirst, um fortzufahren 1. Drücke (A) um fortzufahren 1. Drücke (B), um zum Hauptmenü zurückzukehren #### Section VIII - Backup Essential Files 1. Select "Backup Options" 1. Select "SysNAND Backup" 1. Drücke (A) zum bestätigen + Dieser Vorgang nimmt einige Zeit in Anspruch + If you get an error, make sure that you have at least 1.3GB of free space on your SD card 1. Drücke (A) um fortzufahren 1. Drücke (B), um zum Hauptmenü zurückzukehren 1. Select "Dump Options" 1. Select "Dump Boot9.bin & Boot11.bin" 1. Drücke (A), wenn du dazu aufgefordert wirst, um fortzufahren 1. Drücke (A) um fortzufahren 1. Drücke (B), um zum Hauptmenü zurückzukehren 1. Select "Exit" 1. Drücke (A), um die Schreibrechte zu deaktivieren, wenn du dazu aufgefordert wirst 1. Navigate to `[S:] SYSNAND VIRTUAL` 1. Press (A) on `essential.exefs` to select it 1. Select "Copy to 0:/gm9/out" + If you see "Destination already exists", press (A) on "Overwrite file(s)" 1. Drücke (A) um fortzufahren 1. Drücke (HOME) um das Aktionsmenü aufzurufen 1. Select "Poweroff system" to power off your device 1. Stecke deine SD-Karte in deinen Computer 1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs`, `_boot9_###.bin`, and `_boot11_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer + Erstelle Backup Dateien an mehreren Orten (USB-Stick, PC, Externe Festplatte, Online-Speicher, etc.) + Diese Backups werden im Falle eines Bricks benötigt, um Daten aus dem NAND-Image wieder herzustellen, wenn etwas schief gehen sollte 1. Lösche `__sysnand_###.bin` und `__sysnand_###.bin.sha`aus dem `/gm9/out/` Ordner der SD-Karte nachdem du diese kopiert hast 1. Setze die SD-Karte wieder in die Konsole ein 1. Schalte deine Konsole an ___ You're done! Custom firmware is now fully configured on your device. {: .notice--success} #### Information and Notes {% capture notice-6 %} Here are some key combos that you should know: - Holding (Select) on boot will launch the Luma3DS configuration menu. - Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader. - By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu. - Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist. {% endcapture %}
{{ notice-6 | markdownify }}
See [here](https://3ds.eiphax.tech/tips.html) for some suggestions on things to do with custom firmware. {: .notice--info} For information on using GodMode9's various features, check out the [GodMode9 Usage](godmode9-usage) and [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges) pages. {: .notice--info}