Installing boot9strap (petit-compwner)

如果有疑问并且懂英语的话，可以到 Nintendo Homebrew Discord 服务器上使用英文寻求帮助。（请注意，如果你身处中国大陆，你可能需要通过科学上网来访问 Discord） 你也可以到译者的 QQ 群寻求帮助，群号为 942052497。
如果你喜欢我们的教程，可以通过捐赠支持我们。
技术细节（选看）

We use petit-compwner to launch b9sTool, which installs boot9strap.

See here for more information about petit-compwner.

You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!

你需要准备点啥？

  • 11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
    • Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
  • 最新版本的 Luma3DS（下载 Luma3DS .zip 文件）

第一步 – 检查自制固件

为了确保安装能够安全进行，我们这里将先检查主机是否已经安装了自制固件。 因为如果主机已经安装了自制固件，使用此方法再次安装可能会导致主机变砖（导致其无法开机，只能使用 ntrboot 之类的方法恢复。）

  1. 将主机关机
  2. 按住 “Select” 键
  3. 在按住 “Select” 键的同时按下电源键开机
  4. 如果主机自动启动到了主菜单，则测试成功，你可以继续做此教程中的余下内容
  5. 将主机关机

如果主机进入到了一个配置菜单或者直接关机了，那就表示你的主机之前已经安装过自制固件了。如果继续操作的话可能会导致主机变砖！ 继续至检查自制固件来更新你现有的自制固件。

第二步 – 准备工作

In this section, you will copy the files necessary to launch b9sTool, which is used to launch the boot9strap (custom firmware) installer.

  1. 将你的 SD 卡插入到电脑
  2. Copy boot.nds (B9STool) from the release .zip to the root of your SD card
    • 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
  3. 解压 Luma3DS .zip 里的 boot.firm 和 boot.3dsx 到你 SD 卡的根目录
  4. Reinsert your SD card into your console

  5. Power on your console

Section III - petit-compwner

In this section, you will scan the QR codes needed to trigger the petit-compwner exploit.

  1. Open the latest release of petit-compwner on your computer
  2. On your console, launch Petit Computer
  3. Select File Management
  4. Select Read QR Codes
  5. Scan each QR code in order, from 1/5 to 5/5
  6. Once you have scanned all the QR codes, exit File Management
  7. Select View Gallery
  8. Launch the PWN program
  9. If the exploit was successful, your console will have loaded b9sTool

第四步 – 安装 boot9strap

In this section, you will install custom firmware onto your console.

  1. Using the D-Pad, move to “Install boot9strap”
    • If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
  2. Press (A), then press START and SELECT at the same time to begin the process
  3. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
    • You may have to force power off by holding the power button
    • 如果你的主机在你尝试开机后直接自动关机了，请确认你已经从 Luma3DS .zip 中复制了 boot.firm 文件到你的 SD 卡根目录中
    • If you see the Luma Configuration screen, power off your console and continue to the next section

Section V - Luma3DS Configuration

  1. Press and hold (Select), and while holding (Select), power on your console
  2. 你的主机应该会在开机后进入 Luma3DS 配置菜单
    • Luma3DS 配置菜单用于设置 Luma3DS 自制固件的可选功能 其中有许多功能可用于个性化或调试
    • 对于本手册的目的而言，请不要修改默认设置（不要选中或者取消选中任何东西）
    • 如果你的主机在你尝试开机后直接自动关机了，请确认你已经从 Luma3DS .zip 中复制了 boot.firm 文件到你的 SD 卡根目录中
  3. 按下 “Start” 键保存设置并重启

At this point, your console will boot to Luma3DS by default.

  • Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  • On the next page, you will install useful homebrew applications to complete your setup.

继续至完成安装