---
title: "Installing boot9strap (Fredtool-Inject)"
---

{% include toc title="Tabla de contenidos" %}

{% capture technical_info %}
<summary><em>Technical Details (optional)</em></summary>

This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application.

This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).

{% endcapture %}
<details>{{ technical_info | markdownify }}</details>
{: .notice--info}

You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
{: .notice--warning}

### Qué necesitas

* Your `movable.sed` file from completing [Seedminer](seedminer-(alternate))
* Your DSiWare backup from completing [Dumping eShop DSiWare](dumping-eshop-dsiware)
* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) (`Frogminer_save.zip`)
* **11.16.0 or 11.17.0 users**: The v6.1.1 release of [b9sTool](https://github.com/zoogie/b9sTool/releases/download/v6.1.1/release_6.1.1.zip)
    * Make **absolutely sure** that you are one of these firmwares, as being on other firmwares may lead to a BRICK
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)

#### Sección I - Verificación de CFW

{% include_relative include/cfw-check-fredtool.txt %}

#### Sección II - Preparativos

In this section, you will copy the files necessary to temporarily replace DS Connection Settings with Flipnote Studio, which is used to launch the boot9strap (custom firmware) installer.

1. Inserta tu tarjeta SD en tu computadora
1. Open the [DSIHaxInjector_new](https://jenkins.nelthorya.net/job/DSIHaxInjector_new/build?delay=0sec) website on your computer
1. Under the "Username" field, enter any alphanumeric name (no spaces or special characters)
1. Under the "DSiBin" field, upload your DSiWare backup file (e.g. 42383841.bin) from the root of your SD card using the first "Browse..." option
1. Under the "MovableSed" field, upload your `movable.sed` file using the second "Browse..." option
1. Under the "InjectionTarget" field, set the injection target to `DSinternet` (NOT memorypit)
1. Click "Build"
    + Wait a few seconds for the build process to complete
1. In the Build History section on the left, type the Username into the "Filter Builds" field
1. Click on the first search result
    + This result should have the latest timestamp
1. Click the "output_(name).zip" link
1. Ve a `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` en tu tarjeta SD
    + `<ID0>` is the 32-letter folder name that you copied in [Seedminer](seedminer)
    + `<ID1>` is a 32-letter folder inside of the `<ID0>`
1. Copy the `42383841.bin`  file from the `hax` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
    ![]({{ "/images/screenshots/bb3/dsiware-location-4.png" | absolute_url }}){: .notice--info}
1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD
    + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
1. Copy `boot.nds` (B9STool) from the release `.zip` to the root of your SD card
1. Copia la carpeta `private` contenida en el `.zip` de Frogminer_save a la raíz de tu tarjeta SD
1. Reinsert your SD card into your console
1. Power on your console

    ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
    {: .notice--info}


#### Section III - Overwriting DS Connection Settings

In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.

1. Launch System Settings on your console
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
1. Select the "Haxxxxxxxxx!" title
    + If you are unable to select the "Haxxxxxxxxx" title, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-fredtool-inject)
1. Selecciona "Copiar", luego "OK"

#### Section IV - Flipnote Exploit

In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.

If you would prefer a visual guide to this section, one is available [here](https://zoogie.github.io/web/flipnote_directions/).
{: .notice--info}

1. Regresa al menú principal de Configuración de la Consola
1. Navigate to `Internet Settings` -> `Nintendo DS Connections`, then select "OK" ([image](/images/screenshots/fredtool/dsconnection.png))
1. If the exploit was successful, your console will have loaded the JPN version of Flipnote Studio
    + If your console does not load the JPN version of Flipnote Studio, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-fredtool-inject)
{% include_relative include/exploit-flipnote.txt %}

#### Section V - Installing boot9strap

{% include_relative include/install-boot9strap-b9stool.txt %}

#### Section VI - Luma3DS Configuration

1. Press and hold (Select), and while holding (Select), power on your console
{% include_relative include/configure-luma3ds.txt %}

{% include_relative include/luma3ds-installed-note.txt %}

#### Section VII - Restoring DS Connection Settings

In this section, you will restore DS Connection Settings to the way it was before it was temporarily replaced with Flipnote Studio in an earlier section.

1. Ve a `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` en tu tarjeta SD
1. Copy the `42383841.bin`  file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder, replacing the existing one
1. Reinsert your SD card into your console
1. Power on your console
1. Launch System Settings on your console
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
1. Select the "Nintendo DSi™" title
1. Selecciona "Copiar", luego "OK"

___

### Continúa en [Finalizar instalación](finalizing-setup)
{: .notice--primary}