Cambio de Región

Para soporte en inglés, pide ayuda en el Discord de Nintendo Homebrew.
Si te gustó esta guía, aceptamos Donaciones.

Lectura requerida

This is an add-on section for region changing your console. This is done by installing the 11.15.0 CTRTransfer image for the region you want to switch to. After installing the image, you can update your console normally to the latest firmware (11.17.0).

Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title Locale Emulation. Additionally, running NDS games with alternative out-of-region languages is supported by TWiLight Menu++. You should only perform a region change if you wish to have your system UI is in a language that is not available on your console’s current region.

This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.

As a part of this process, your system settings will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.

If you change the region of your console:

  • You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
  • You may not be able to access the eShop, even if you delete your eShop account beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
    • This is still relevant because, while purchases can no longer be made on eShop, game updates are still being provided. Updates are usually required for online play.
    • This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
    • That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
  • You will not be able to uninstall custom firmware without bricking the console! If you intend to uninstall custom firmware in the future, you MUST restore your NAND backup that was created before the region change.

Qué necesitas

To download the CTRTransfer images on this page, you will need a torrent client like qBittorrent or Deluge.

Instrucciones

Sección I - Preparativos

  1. Power off your console
  2. Inserta tu tarjeta SD en tu computadora
  3. Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
  4. Copia el archivo GodMode9.firm desde el .zip de GodMode9 a la carpeta /luma/payloads/ en tu tarjeta SD
  5. Copia la carpeta gm9contenida en el .zipde GodMode9 al directorio raíz de tu tarjeta SD
  6. Copy the 11.15.0 CTRTransfer image .bin from the CTRTransfer .zip to the /gm9/ folder on your SD card
  7. Copia FBI.3dsx a la carpeta /3ds/ de tu tarjeta SD
  8. Copy faketik.3dsx to the /3ds/ folder on your SD card
  9. Reinsert your SD card into your console

Sección II - Copia de seguridad de la NAND

  1. Press and hold (Start), and while holding (Start), power on your console. Esto iniciará GodMode9
  2. Presiona el botón (Home) para abrir el menú de acción
  3. Selecciona “Scripts…”
  4. Selecciona “GM9Megascript”
  5. Selecciona “Backup Options”
  6. Selecciona “SysNAND Backup”
  7. Presiona (A) para confirmar
  8. Presiona (A) para continuar
  9. Presiona (B) para volver al menú principal
  10. Selecciona “Exit”
  11. Presiona (A) para volver a bloquear los permisos de escritura si se solicita
  12. Hold (R) and press (Start) at the same time to power off your console
  13. Inserta tu tarjeta SD en tu computadora
  14. Copy <date>_<serialnumber>_sysnand_##.bin and essential.exefs from the /gm9/out/ folder on your SD card to a safe location on your computer
    • Haz copias de seguridad en múltiples sitios (como por ejemplo, en un pendrive o almacenamiento online)
    • Estos respaldos podrán prevenir que se inutilice la consola y/o ayudarte a recuperar archivos de la memoria de tu consola si algo sale mal en el futuro
  15. Delete <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha from the /gm9/out/ folder on your SD card after copying it
  16. Reinsert your SD card into your console

Sección III - CTRTransfer

  1. Press and hold (Start), and while holding (Start), power on your console. Esto abrirá GodMode9
  2. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it is completed
  3. Si se te pide fijar la fecha y hora RTC, presiona (A) para hacerlo, luego define la fecha y la hora, y después presiona (A) para continuar
    • Ten en cuenta que, si tuviste que cambiar la fecha y hora RTC, también deberás cambiar la hora en la Configuración de la consola después de hacer esta guía
  4. Ve a [0:] SDCARD -> gm9
  5. Presiona (A) sobre el .bin del CTRTransfer para seleccionarlo
  6. Selecciona “CTRNAND options…”
  7. Selecciona “Transfer image to CTRNAND”
  8. Si se solicita, seleccionar “Transfer to SysNAND”
    • Esto sólo aparecerá si tienes una EmuNAND
  9. Presiona (A) para desbloquear la escritura de la SysNAND (lvl1) y después ingresa la combinación de teclas mostrada
    • Este proceso tomará un tiempo
  10. Once the transfer is completed, press (A) to continue
  11. Presiona (B) para rechazar el rebloqueo de permisos de escritura si se solicita
  12. Presiona (B) dos veces para volver al menú principal
  13. Presiona el botón (Home) para abrir el menú de acción
  14. Selecciona “Scripts…”
  15. Selecciona “GM9Megascript”
  16. Selecciona “Scripts from Plailect’s Guide”
  17. Selecciona “CTRTransfer Ticket Copy”
  18. Presiona (A) para continuar cuando se te pida
  19. Presiona (A) para continuar
  20. Presiona (B) para volver al menú principal
  21. Selecciona “Exit”
  22. Presiona (A) para volver a bloquear los permisos de escritura si se solicita
  23. Press (Start) to reboot your console
  24. Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • Actualizar la consola teniendo B9S y Luma (lo que acabas de instalar) es seguro
    • Si esto te da un error, ajusta tu configuración de DNS a “obtención automática”

Sección IV - Iniciar FBI

  1. Ejecuta la aplicación Modo Descarga ()
  2. Espera hasta ver las opciones que dicen Nintendo 3DS y Nintendo DS
  3. Presiona (Left Shoulder) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina
  4. Selecciona “Miscellaneous options”
  5. Selecciona “Switch the hb. title to the current app.”
  6. Presiona (B) para continuar
  7. Presiona (B) para regresar al menú principal de Rosalina
  8. Presiona (B) para salir del menú de Rosalina
  9. Press (Home) to suspend Download Play
  10. Press the “Close” button on the bottom screen to close Download Play
  11. Re-launch the Download Play application
  12. Your console should load the Homebrew Launcher
    • If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card

Sección V - Reinstalación de Tickets

If the script found no user tickets and told you to skip this section, you can skip this section.

  1. Inicia FBI desde la lista de homebrew
  2. Select “SD”
  3. Selecciona “gm9”
  4. Selecciona “out”
  5. Selecciona “ctrtransfer_tickets”
  6. Haz el siguiente proceso para la carpeta eshop, unknown, o ambas
    • Ve a la carpeta
    • Selecciona “<current directory>”
    • Selecciona “Install and delete all tickets”
    • Espera. El sistema aparentará estar congelado, simplemente dale tiempo.
    • Presiona (A) para confirmar
    • Presiona (B) para rechazar la instalación de tickets desde CDN.
  7. Presiona (Home) para salir de FBI
  8. Re-open the Homebrew Launcher, either through the Homebrew Launcher icon on the HOME Menu or by re-following Section III of this page
  9. Launch faketik from the list of homebrew
  10. Once faketik has finished processing, press (Start) to exit faketik

Section VI - Fixing locale-related issues

This section will reset your system settings to its defaults. Installed games and their save data will not be affected. This is required to prevent known issues relating to extended memory mode and applets on some consoles.

  1. Power off your console
  2. Press and hold (Start), and while holding (Start), power on your console. Esto abrirá GodMode9
  3. Ve a [0:] SDCARD -> gm9
  4. Presiona (X) en la imagen .bin de CTRTransfer para borrarla
  5. Presiona (A) para confirmar
  6. Press (B) a few times to go back to the main menu
  7. Navigate to [1:] SYSNAND CTRNAND -> data -> <ID0> -> sysdata
    • The <ID0> will be a folder with a 32 character length random-looking name. You may recognize this from Seedminer, if you used that method
  8. Use the D-Pad to highlight 00010017
  9. Press (Right Shoulder) + (A) to bring up the folder options
  10. Selecciona “Copy to 0:/gm9/out”
  11. Presiona (A) para continuar
  12. While still highlighting 00010017, press (X) to delete it
  13. Presiona (A) para confirmar
  14. Press (A) to unlock SysNAND (lvl2) writing, then input the key combo given
  15. Once the file has been deleted, press (A) to continue
  16. Presiona (A) para volver a bloquear los permisos de escritura si se solicita
  17. Press (Start) to reboot your console
  18. Your console will load into the initial setup menu
    • This is expected behaviour. You have not lost any of your game data
  19. Complete the initial setup menu by following the prompts on your console’s screen

Your 3DS has successfully been region changed!