111 lines
6.3 KiB
Plaintext
111 lines
6.3 KiB
Plaintext
---
|
||
title: "Installing boot9strap (MSET9 Play Store)"
|
||
---
|
||
|
||
{% include toc title="Sisällysluettelo" %}
|
||
|
||
{% capture technical_info %}
|
||
<summary><em>Technical Details (optional)</em></summary>
|
||
[MSET9](https://github.com/zoogie/MSET9) is an exploit for the System Settings application developed by [zoogie](https://github.com/zoogie). It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be *any* name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
|
||
|
||
{% endcapture %}
|
||
<details>{{ technical_info | markdownify }}</details>
|
||
{: .notice--info}
|
||
|
||
### Compatibility Notes
|
||
|
||
This page requires an Android phone/tablet or a Chromebook. If you have a computer running Windows, macOS, or Linux, follow [Installing boot9strap (MSET9 CLI)](installing-boot9strap-(mset9-cli)) instead. If you do not have access to any of these devices, you will need to use an [alternate exploit](https://wiki.hacks.guide/wiki/3DS:Alternate_Exploits).
|
||
{: .notice--warning}
|
||
|
||
On Android phones/tablets, the minimum Android version required is 6.0 (Marshmallow).
|
||
{: .notice--warning}
|
||
|
||
### Tarpeet
|
||
|
||
* The following applications installed from the Google Play Store:
|
||
* [MSET9 Installer](https://play.google.com/store/apps/details?id=moe.saru.homebrew.console3ds.mset9_installer_android)
|
||
* [ZArchiver](https://play.google.com/store/apps/details?id=ru.zdevs.zarchiver)
|
||
* If you wish, you can sideload these applications instead
|
||
* The latest release of [MSET9](https://github.com/zoogie/MSET9/releases/latest) (the Release `.zip` file)
|
||
|
||
### Ohjeet
|
||
|
||
#### Vaihe I – Valmistelut
|
||
|
||
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
|
||
|
||
1. Power on your console **with your SD card inserted**
|
||
1. Open Mii Maker
|
||
1. Wait for your console to reach the "Welcome to Mii Maker" screen, then exit Mii Maker
|
||
+ You may see [this screen](/images/screenshots/mset9/mii-extdata.png), which indicates the necessary data has been created
|
||
+ If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
|
||
1. Power off your console
|
||
1. Insert your SD card into your phone/tablet/computer
|
||
1. Copy everything from the Release `.zip` to the root of your SD card, overwriting any existing files:
|
||
+ Open ZArchiver
|
||
+ If prompted, [allow ZArchiver to access files on your SD card](/images/screenshots/mset9/zarchiver-allow.png)
|
||
+ Navigate to where the downloaded MSET9 Release `.zip` is located ([likely in the Downloads folder](/images/screenshots/mset9/zarchiver-zip-location.png))
|
||
+ Select the Release `.zip`, then select "Extract..." ([image](/images/screenshots/mset9/zarchiver-extract-1.png))
|
||
+ Navigate to your SD card, then tap the blue 'down arrow' icon to extract the files to the root of your SD card ([image](/images/screenshots/mset9/zarchiver-extract-2.png))
|
||
|
||
|
||
{: .notice--info}
|
||
|
||
1. Run the [MSET9 Installer application](/images/screenshots/mset9/mset9-setup-android.png)
|
||
1. Tap on `Select "Nintendo 3DS" Folder`, then navigate to your `Nintendo 3DS` folder on your SD card ([image](/images/screenshots/mset9/select-mset9-folder-1.png))
|
||
1. Once inside the `Nintendo 3DS` folder, tap on "Use this folder", then "Allow" if asked ([image](/images/screenshots/mset9/select-mset9-folder-2.png))
|
||
1. If "Setup MSET9" is [highlighted](/images/screenshots/mset9/setup-mset9-highlighted.png), proceed to the next step. **Do not setup MSET9 yet.** Close the MSET9 Installer for now
|
||
+ If "Check Again" is highlighted, there is a problem that you need to resolve before you can use MSET9. Refer to the [troubleshooting](troubleshooting#installing-boot9strap-mset9)
|
||
1. Reinsert your SD card into your console
|
||
1. Power on your console
|
||
|
||
#### Section II - MSET9
|
||
|
||
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
|
||
|
||
These instructions must be followed **EXACTLY**, so double-check EVERYTHING you are doing to avoid errors!
|
||
{: .notice--danger}
|
||
|
||
1. **[Hover over](/images/screenshots/mset9/hover-settings.png)** the System Settings icon using the D-Pad (do not select it yet)
|
||
1. Power off, then power on your console
|
||
1. Press (A) to launch System Settings
|
||
1. Navigate to `Data Management` -> `Nintendo 3DS` -> `Extra Data` ([image](/images/screenshots/mset9/settings-extdata.png))
|
||
1. **Do not press any buttons or touch the screen** - ensure that you see the Mii Maker icon
|
||
1. **With the console STILL ON, and without pressing any buttons or touching the screen**, remove your SD card from your console
|
||
+ The menu will refresh and say that no SD card is inserted, which is expected
|
||
1. Insert your SD card into your phone/tablet/computer
|
||
1. Open the MSET9 Installer application
|
||
1. Tap "Setup MSET9"
|
||
1. Tap on the photo corresponding to your console model, then on the button corresponding to your current firmware version
|
||
+ If the injection was successful, all buttons should become grayed out except for "Remove MSET9"
|
||
1. Reinsert your SD card into your console **without pressing any buttons or touching the screen**
|
||
1. Jos haavoittuvuuden hyödyntäminen onnistui, SafeB9SInstallerin pitäisi avautua
|
||
+ If you get a red screen or the console gets stuck on a loading screen, follow the [troubleshooting guide](troubleshooting#installing-boot9strap-mset9)
|
||
|
||
#### Vaihe III – Boot9strapin asentaminen
|
||
|
||
{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
|
||
{%- include_relative include/configure-luma3ds.txt %}
|
||
|
||
#### Section IV - Removing MSET9
|
||
|
||
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
|
||
|
||
Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
|
||
{: .notice--danger}
|
||
|
||
1. Power off your console
|
||
1. Insert your SD card into your phone/tablet/computer
|
||
1. Open the MSET9 Installer application
|
||
1. Tap "Remove MSET9"
|
||
1. Close the MSET9 Installer application
|
||
|
||
{% include_relative include/luma3ds-installed-note.txt %}
|
||
___
|
||
|
||
Did you follow Section IV (Removing MSET9)? That section is MANDATORY!
|
||
{: .notice--danger}
|
||
|
||
### Jatka osioon [Asennuksen viimeistely](finalizing-setup)
|
||
{: .notice--primary}
|