Guide_3DS/_pages/el_GR/move-emunand.txt
2018-11-18 19:16:52 -05:00

160 lines
8.2 KiB
Text
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

---
title: "Move EmuNAND"
---
This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Σημειώστε ότι οι όροι EmuNAND και RedNAND αναφέρονται σε ελαφρώς διαφορετικές υλοποιήσεις [της ίδιας έννοιας](http://3dbrew.org/wiki/NAND_Redirection).
Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
#### Τι χρειάζεστε
* Μια υπάρχουσα EmuNAND
* Την τελευταία έκδοση του [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* Την τελευταία έκδοση του [FBI](https://github.com/Steveice10/FBI/releases/latest)
#### Οδηγίες
##### Ενότητα I - Προετοιμασία
1. Power off your device
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Copy `GodMode9.firm` (or `GodMode9.bin` for arm9loaderhax users) from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
1. Reinsert your SD card into your device
##### Section II - Backup SysNAND DSiWare Saves
If you do not have any DSiWare games or saves that you care about, skip this section.
{: .notice--info}
1. Launch GodMode9 by holding (Start) during boot
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
+ Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide
1. Navigate to `[2:] SYSNAND TWLN` -> `title`
1. Hold (R) and press (A) at the same time on `00030004` to select the folder, then select "Copy to 0:/gm9/out"
+ This process may take some time if you have many DSiWare games
1. Press (B) twice to return to the main menu
##### Section III - Backup GBA VC Saves
If you do not have any GBA VC games or saves that you care about, skip this section.
{: .notice--info}
Note that this is not necessary for any other kind of Virtual Console games (GBC, NES, etc)
{: .notice--info}
1. Hold (R) and press (Start) at the same time to power off your device
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Create a folder in `/gm9/` for each GBA VC game that you want to backup the save for
1. Reinsert your SD card into your device
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
+ Launch the GBA VC game on SysNAND
+ Exit the GBA VC game
+ Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+ Launch GodMode9 by pressing (A)
+ Navigate to `[S:] SYSNAND VIRTUAL`
+ Press (Y) on `gbavc.sav` to copy it
+ Press (B) to return to the main menu
+ Navigate to `[0:] SDCARD` -> `gm9`
+ Navigate to the folder you created for this GBA VC game
+ Press (Y) to paste `gbavc.sav`
+ Press (Start) to reboot your device
##### Section IV - Copy EmuNAND to SysNAND
1. Launch GodMode9 by holding (Start) during boot
1. Navigate to `[E:] EMUNAND VIRTUAL`
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+ This will not overwrite your arm9loaderhax installation
1. Input the key combo given to unlock SysNAND (lvl1) writing
+ This process will take some time
1. Once it has completed, press (A) to continue
1. Press (B) to decline relocking write permissions if prompted
1. Press (B) to return to the main menu
##### Section V - Restore DSiWare Saves
If you did not backup DSiWare Saves earlier, skip this section.
{: .notice--info}
1. Navigate to `[0:] SDCARD` -> `gm9` -> `out`
1. Press (Y) on the `00030004` folder to copy it
1. Press (B) twice to return to the main menu
1. Navigate to `[2:] SYSNAND TWLN` -> `title`
1. Press (Y) to paste the `00030004` folder
1. Select "Copy path(s)"
1. Πατήστε (A) για να ξεκλειδώσετε την εγγραφή στη SysNAND (lvl1) και έπειτα εισάγετε τον συνδυασμό πλήκτρων που θα σας δοθεί
1. Select "Overwrite file(s)"
+ This process may take some time if you have many DSiWare games
1. Press (B) to decline relocking write permissions if prompted
1. Press (B) twice to return to the main menu
##### Section VI - Restore GBA VC Saves
If you did not backup GBA VC Saves earlier, skip this section.
{: .notice--info}
1. Hold (R) and press (Start) at the same time to power off your device
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
+ Launch the GBA VC game on SysNAND
+ Exit the GBA VC game
+ Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+ Launch GodMode9 by pressing (A)
+ Navigate to `[0:] SDCARD` -> `gm9`
+ Navigate to the folder you created for this GBA VC game
+ Press (Y) on `gbavc.sav` to copy it
+ Press (B) to return to the main menu
+ Navigate to `[S:] SYSNAND VIRTUAL`
+ Press (Y) to paste `gbavc.sav`
+ Press (A) to confirm
+ Press (Start) to reboot your device
1. Launch GodMode9 by holding (Start) during boot
##### Section VII - Backup SysNAND
1. Press (Home) to bring up the action menu
1. Select "Scripts..."
1. Select "Backup SysNAND"
1. Πατήστε (A) για επιβεβαίωση
+ This process will take some time
1. Πατήστε (A) για να συνεχίσετε
1. Κρατήστε πατημένο το (R) και πατήστε ταυτόχρονα το (B) για να αφαιρέσετε την κάρτα SD
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Αντιγράψτε το `<serialnumber>_nandmin_###.bin` από το φάκελο `/gm9/out/` της κάρτας SD σε μια ασφαλή τοποθεσία στον υπολογιστή σας
+ Make backups in multiple locations (such as online file storage)
+ Αυτά τα αντίγραφα ασφαλείας θα σας σώσουν από την αχρήστευση της συσκευής σε περίπτωση που κάτι πάει στραβά
1. Delete `<serialnumber>_nandmin_###.bin` from the `/gm9/out/` folder on your SD card after copying it
1. **Δημιουργήστε ένα αντίγραφο ασφαλείας όλων των αρχείων της κάρτας SD σε έναν φάκελο στον υπολογιστή σας. Θα διαγραφούν τα πάντα από την κάρτα SD στα επόμενα βήματα**
##### Section VIII - Format SD card
1. Reinsert your SD card into your device
1. Press (Home) to bring up the action menu
1. Select "More..."
1. Επιλέξτε "SD format menu"
1. Πατήστε (A) για επιβεβαίωση
1. Επιλέξτε "No EmuNAND"
1. Επιλέξτε "Autο"
1. Press (A) to accept the label `GM9SD`
+ Optionally, you may input a custom name for the SD card
1. When prompted, input the key combo given to confirm
1. Κρατήστε πατημένο το (R) και πατήστε ταυτόχρονα το (B) για να αφαιρέσετε την κάρτα SD
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Copy all your files back to your SD card
+ Ensure you replace the `boot.firm` file on your SD card with the one from your backup
1. Reinsert your SD card into your device
1. Πατήστε (A) για να ξαναμοντάρετε την κάρτα SD
1. Press (Start) to reboot
1. Εάν αντιμετωπίζετε μια μαύρη οθόνη, [ακολουθήστε αυτόν τον οδηγό αντιμετώπισης σφαλμάτων](troubleshooting#ts_sys_down)
___
Return to [Finalizing Setup](finalizing-setup).
{: .notice--primary}